Applicant: Motorola, Inc Equipment Type: ABZ99FT4073 Instruction Manual This exhibit contains a copy of the Instruction Manual for this equipment. A manual of a type similar to this will be included with each transceiver. Exhibit 6 Sheet 1 of 1 Applicant: Motorola, Inc. Equipment Type:ABZ99F T4073 P1225_Op_Guide 0 Wed Nov 6 12:30:49 1996 Operator Card for P1225 Portable Radio Copyright October. 1996 Motorota. Inc. All UCR a ts dd Tarjeta del Operador para el radio portable P1225 Copyright October, 1996 Motorola, Inc. All ee aes]
Copyright October. 1996 Motorola, Inc. All Cas
(A) MOTOROLA PRUE Tyee) Operator Card for P1225 Portable Radio Ce att na ay Eten) Tarjeta del Operador para el radio portable P1225 Ce nee Le a erp epee Ce Le ee teen ary ee
@) moronora 6880904292-0 Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 1 Wed Nov 6 12:30:49 1996 Introduction
This operator card contains the information needed to identify the controls and visual indicators, oper-
ate, and troubleshoot the P1225 portable radio. Information about the radio's visuat ana audible indicators is highiighted and illustrated with icons. Information about radio safety, batteries. licensing, and other issues to be considered betore operating the radio are contained in the Radius Portable Satety/Licensing Guide (Motorola part number 6880905204). The guide should be inclugad in the shipment with your radio. It you need a replacement of the Safety/Licensing Guide or this Operator Card, please contact your locai Motoroia Radius dealer or distributor. :
Read this Information before using your portable radio. For the safe and efficient operation of your portable radio, observe these guidelines. Introduction
= La taneta del operador sirve para identificar los controlas e indicadores visuales. operar y diagnosticar averias en las radios portable P1225. La informacin sobre ios indicadores visuales y sonoros esta resaitadsa y aparece ilustrada con iconos. La informacin sobre seguridad, batteries. licencia y demas temas a considerar antes de operar al radio aparece en la P1225 Safety/Licensing Guide (Guia de safety/licencia del tadio) (numero de S pveza de Motorola 6880905204). La Guia viene junto con el radio. Contactese con ef distribuidor de S Radius de Motorola mas cercano si necesita una nueva Guia de Safety/Licensing (safety/icencia) o Tarjeta del operador. Lea estas Inatrucciones antes de usar ei radio portable. Siga estas normas para usar ei radio Portable en forma segura y eficiente. introduction This operator card contains the information needed to identify the controls and visual indicators, oper-
ate, and troubleshoot the P1225 portable radio. Information about the radio's visual and audible indicators is highlighted and illustrated with icons. Information about radio safety, batteries, licensing, and other issues to be considered before operating the radio are contained in the Radius Portable Safety/Licensing Guide (Motorola part number 68680905204). The guide should be included in the shipment with your radio. If you need a replacement of the Safety/Licensing Guide or this Operator Card, please contact your local Motorola Aladius dealer or distributor. Read this Information before using your portable radio. For the safe and efficient operation of your portable radio, observe these guidelines. lamas a considerar antes de cperar al satetyficencia dal radio) (nimero ae radio, Contictose con ol distribuidor de are atene e Introduction pout radio safety, batteries. licensing, and other issues to be considered before oy contained in the Radius Portable Salety/Licensing Guide (Motorola part number
. The guide should be included in he shipment with your radio. if you need a revia tcl seg acer es rel Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 2 Wed Nov 6 12:30:49 1996 an QW Controls and Visual Indicators Controls A. Volume ON/OFF Knob B. Channel Selector C. Push-To-Talk (PTT) Button D. Monitor Button E. Option Button Visual Indicators 1. Light Emitting Diode (LED) Controles indicadores visuales
. Controls Volume ON/OFF Knob Channel Selector Push-To-Taik (PTT) Button Monitor Button Option Button S Visual Indicators 1. Light Emitting Diode (LED) moor Controls and Visual indicators Controls A. Volume ON/OFF Knob B. Channel! Selector C. Push-To-Tatk (PTT) Button D. Monitor Button E. Option Button Visual Indicators 1. Light Emitting Diode (LED) Controles e indicadores visuales CSE ALS Euler Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 3 Wed Nov 6 12:30:49 1996 Operating Instructions Turn the Radio On/Off Turn the volume ON/OFF knob until it clicks. if the radio is Operating properly, a short, high-pitched tone sounds. If the radio ts not operating Q properly, a continuous low-pitched warning tone sounds. Set Volume Press G) Mon Button and hold. Q You hear ail channel activity (including static. While holding @% Mon Button. rotate the volume ON/OFF knob to a comfortable listening level. Instruccions de funcionamiento
~ Encender/Apagar el radio o Gire ta perilla volumen/encendido/apagado hasta que haga clic. Si el radio funciona correctamente, se oye un tono agudo y corto. Si e! radio no tunciona correcta-
Q mente, 84 oye un tono de advertencia bajo y continuo. Fije el volumen
= Press (8) Mon Button and hoid. Ga Q YSe oye toda la actividad del canal (inciuso la esttica"). While holzing @) Mon Button, rotate the volume ON/OFF knob to a comfortable listening tevel. Operating Instructions Turn the Radio On/Off Turn the volume ON/OFF knob until it clicks. tf the radio is operating properly, a short, high-pitched tone sounds. If the radio is not operating Q property, continuous low-pitched warning tone sounds. Set Volume Press @) Mon Button and hold. Q You hear ail channel activity (including static"). While holding 8) Mon Button, rotate the volume ON/OFF knob to a comfortable listening level. me Operating Instructions MUS eR ane ued eure Musi (els Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073
| P1225_Op_Guide 4 Wed Nov 6 12:30:49 1996 |
| O |
Select a Channel 4 | Rotate the channel selector to the desired channel position. The channel selector clicks into place for each channel. Receive oi Rotate tre cnannei selector to tne desired channel position. Make sure the PTT is released. Ba Listen tor voice activity.
% The LED blinks red when the radio is receiving. Instrucciones de funcionamiento Seleccione el canal 1 | Rotate the channel selector to the desired channel position. The channel selector clicks into Place for each channel. Recibir 1 | Rotate tha channel selector to the desired channel! position. any Make sure the PTT is released. g Escuche si hay actividad de voz. ur The LED blinks red when the radio is recalving. Operating Instructions Select a Channel 1 | Rotate the channet selector to the desired channel position. The channel selector clicks into place for each channel. Receive 1 | Rotate the channel selector to the desired channel position. Make sure the PTT is released. BB Listen for voice activity. x The LED blinks red when the radio is receiving.
MCUs usu Operating Instructions:
Lee aera its Applicant: Motorola, Inc. Equipment Type: ABZ99FT4073 P1225_Op_Guide 5 Wed Nov 6 12:30:49 1996 Operating Instructions Monitor NOTE:
In the United States, FCC reguiatons require you to monitor the channel before you transmit. Although ail Sountnes do not have a similar requirements, monitoring the channel is proper radio etiquette to provide an Orderly approach to using shared frequencies. 1 | Press and release GX) Mon Button to enter Monitor Mode. wt The LED glows yellow when you successfully enter Monitor Mode. Q 4 short, low-pitched tone sounds when you enter or exit Monitor Mode. B Listen for voice activity. El Press and release (@) Mon Button again to exit Monitor Mode. Instrucciones de funcionamiento
. Supervisin NOTA:
En tos EE.UU. la FCC exige supervisar ef canal antes de trasmitir. Aunque no todos los paises tienen los mismos requisitos, la supervision de canal es una buena manera de usar frecuencias compartidas de manera ordenada. Press and release (@) Mon Bution to enter Monitor Mode.
* The LED giows yellow when you successfully enter Monitor Mode. Q A short, low-pitched tone sounds when you enter or exit Monitor Mode. o a Listen for voice activity. El Press and release (8) Mon Button again to exit Monitor Mode. Operating Instructions Monitor NOTE:
In the United States, FCC regulations require you to monitor the channel before you transmit. Aithough all countries do not have a similar requirements, monitoring the channel is proper radio etiquette to provide an orderly approach to using shared frequencies. 1 | Press and release @2) Mon Button to enter Monitor Mode. bes The LED glows yellow when you successfully enter Monitor Mode. Le A short, low-pitched tone sounds when you enter or exit Monitor Mode. B Listen tor voice activity. El Press and release G8) Mon Button again to exit Monitor Mode.
| PEN rR Usui (eli ty
| LES eR rnc}
En los EE.UU. la FOC enige sup mismos requisitos. Ia supervsio
Operating Instructions In the United States, FCC regulations require ries do not have a similar mequirarnente Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 6 Wed Nov 6 12:30:49 1996 Operating Instructions
Transmit NOTE: ;
in the United States, FCC regulations require you to monitor the channel before you transmit. Press the PTT. wt The LED glows red when the radio is transmitting. It the channel is busy when you try to transmit, a senes of low-pitched tones sound until you release the PTT. Instrucciones de funcionamiento
- Transmitir NOTA:
En EE.UU. la FCC exige supervisar ef canal antes de trasmitir. Prasione el botn PTT. tt The LED glows red when the radia is transmitting. Al alcanzar ei limite, s@ oye un tone bajo y continuo (hasta que suelte el botn PTT) y se corta Is as transmision. Operating Instructions Transmit NOTE: . in the United States, FCC reguiations require you to monitor the channel before you transmit. Press the PTT. bed The LED glows red when the radio is transmitting. It the channet is busy when you try to transmit, a series of fow-pitched tones sound until you release the PTT. RU RUS tons Late cd Operating Instructions Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 Operating Instructions Programming Features
* Time-Out Timer (T.0.T.) - limits the amount of time you have to transmit. Preprogrammed trom 1 to 255 seconds or oft.
| P1225_Op_Guide 7 Wed Nov 6 12:30:49 1996 |
When you reach the time limit, a continuous, low-pitcned tone sounds (until you retease the PTT) and your transmission is cut off.
* Busy Channet Lockout ~ several groups of radio users may share a channel. Busy channel lockout Monitors channel activity for you (even activity you cannot hear), preventing you from transmitting while other groups are using a channel NOTE: !f Monitor mode is active. you will not be able to hear any other activity. If the channel is busy when you try to transmit, a series of low-pitched tones sound until you release the PTT.
% The LED blinks red. Instrucciones de funcionamiento
= Programming Features
* El temporizador de apagado (7.0.7) ~ limita el tiampo de transmision. Preprogrammed from 1 to 255 seconds or off. Al alcanzar @1 limite, se oye un tono bajo y continuo (hasta que sueite el botn PTT) y se corta la transmisin.
* Bloqueo de canal ocupado - varios grupos de usuarios pueden compartir un canal. El bioqueo de aoe canal ocupado supervisa fa actividad del canal (incluso la actividad que no se oye) @ impide que usted transmita mientras otros grupos estn usando el canal. NOTE: If Monitor mode is active. you will not be able to hear any other actiwity. Q Se el canal est ocupado, se escuchan tonos bajos y continuos hasta que sueite ei botn PTT.
% The LED blinks red. Operating Instructions Programming Features
* Time-Out Timer (7.0.T.)- limits the amount of time you have to transmit. Preprogrammed from 1 to 255 seconds or off. When you reach the time limit, a continuous, low-pitched tone sounds (until you release the PTT) and your transmission is cut off.
* Busy Channel Lockout - severai groups of radio users may share a channel. Busy channel lockout Monitors channel activity for you (even activity you cannot hear), preventing you from transmitting while other groups are using a channel. NOTE: If Monitor mode is active, you will not be able to hear any other activity. If the channel is busy when you try to transmit, a series of low-pitched tones sound until you release the PTT.
% The LED blinks red.
| GS
er Mus Cis Instrucciones de funcionamiento:
Operatina Instructions. Applicant: Motorola, Inc. Equipment Type:ABZ99F T4073 P1225_Op_Guide 8 Wed Nov 6 12:30:49 1996
Operating Instructions
* Battery Status allows you to gauge the lifespan of your battery between battery charges. The lifespan of your battery is heavily dependent upon the amount of radio transmissions between bat-
tery charges. To check battery status:
Press the PTT. be The LEO giows green when battery has an adequate charge. The LED giows yellow when battery is close to low slert. The LED blinks red when battery needs recharging (low alert) Instrucciones de funcionamiento
* Battery Status - allows you to gauge the lifespan of your battery between battery charges. The lifespan of your battery is heavily dependent upon the amount of radio transmissions between bat-
tery charges. To check battery status:
Press the PTT. x The LED glows green when battery has an adequate charge. The LED glows yellow when battery Is close to iow alert. The LED blinks red when battery needs recharging (low alert). Operating Instructions
* Battery Status altows you to gauge the lifespan of your battery between battery charges. The
\tespan of your battery is heavily dependent upon the amount of radio transmissions between bat-
tery charges. To check battery status:
Press the PTT.
% The LED glows green when battery has an adequate charge. The LED glows yellow when battery is close to low alert. The LEO blinks red when battery needs recharging (low alert).
| Operating Instructions Battery Status ~ aiiows you to gauge the lifespan ot your battery between Wespen f your battery is heavily dependent upon the amount of radio trar charces. WUE eee Ce elie tnt ite) Tha Lea os act when battery has an adequate charge. The LED glows, Operating Instructions glows green when battery has an adequate charge. yellow when battery is close to low alert. Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225 _Op_Guide 9 Wed Nov 6 12:30:49 1996
Operating Instructions Programmable Options Your dealer can program the (Tt) Option Button to perform one of the following four options:
Scan Scan allows you to search for activity on multiple channels. When activity 1s found on a channel, the tadio locks on and suspends scanning. To activate/deactive scan mode:
1 | Press Gt Option Button to activate scan mode, or turn the channel selector to the scan channel Bo The LED blinks green to indicate Scan Mode is activated. B Press @D Option Button again to deactive Scan Mode. or turn the channel selector to another Programmed channel. Instrucciones de funcionamiento
~ Opciones programmables Your dealer can program the GF) Option Button to perform one of the following four options:
Scan Sean allows you to search for activity on multiple channels. When activity is found on a channel, the tadio locks on and suspends scanning. To activate/deactive scan mode:
a 1 | Press @) Option Button to activate scan mode, or turn the channel selector to the scan channel. eS
% The LED blinks green to indicate Scan Mode is activated. Bg Press GF) Option Button again to deactive Scan Mode, or turn the channel selector to another programmed channel. Operating Instructions Programmable Options Your dealer can program the G1 Option Button to perform one of the following four options:
Sean Scan allows you to search for activity on multiple channels. When activity is found on a channel, the radio locks on and suspends scanning. To activate/deactive scan mode:
1 Press GF) Option Button to activate sean mode, or turn the channel selector to the scan channel. beg The LED blinks green to indicate Scan Mode is activated. B Press GT) Option Button again to deactive Scan Mode, or turn the channel selector to another Programmed channel. ce
| Operating Instructions Instrucciones de funcionamiento Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 10 Wed Nov 6 12:30:49 1996 Operating Instructions
* Priority Channel Scan - allows any one of your radio's programmed channels to be designated as the priority channel. When activity accurs on the priority channel, the scanning operation stops on the priority channel, even it you are listening to another channel. Q" alert tone is heard when receiving on a priority channel.
* Nuslance Channel Delete - temporarily deletes an unusually busy channel from the scan list. You can delete channels only while the radio is in channel Scan Mode and is recewing activity on the nui-
sance channel. You cannot delete your priority channel. To delete a channel, press and hold Option Button for 2 seconds while the undesired channel is active until you hear a high-pitched tone. Q@ high-pitched tone sounds when an unwanted channel is successtully deleted. A short low-pitched tone sounds if you try to delete your priority channel or if you are not actively receiving. B To restore deleted channels to the scan list, tum the radio off and on again. Instrucciones de funcionamiento
* Priority Channel Scan allows any one of your radio's programmed channels to be designated as the priority channel. When activity accurs on the priority channel, the scanning operation stops on the priority channel, even if you are listening to another channel. Q" alert tone is heard when receiving on a priority channel.
* Nusiance Channel Delete temporarily deletes an unusually busy channel from the scan list. You can delete channels only while the radio is in channel Scan Mode and is receiving activity on the nui-
<a sance channel. You cannot delete your priority channel. io 1 To delete a channel, press and hold GD Option Button for 2 seconds while the undesired channel is active until you hear a high-pitched tone. Qa high-pitched tone sounds when an unwanted channel is successfully deleted. A short low-pitched tone sounds if you try to delete your priority channel or if you are not actively receiving. Bi To restore deleted channels to the scan list, tum the radio off and on again. Operating Instructions
* Priority Channel Scan - allows any one of your radio's programmed channels to be designated as the priority channel. When activity accurs on the priority channel, the scanning operation stops on the priority channel, even if you are listening to another channel. Q" alert tone is heard when receiving on a priority channel.
* Nuslance Channel Delete - temporarily deletes an unusually busy channel from the scan list. You can delete channels only while the radio is in channel Scan Mode and is receiving activity on the nui-
Sance channel. You cannot delete your priority channel. To delete a channel, press and hold Option Button for 2 seconds while the undesired channel is active until you hear a high-pitched tone.
@ high-pitched tone sounds when an unwanted channel is successfully deleted. A short low-pitched tone sounds if you try to delete your priority channel or if you ere not actively receiving. Bg To restore deleted channels to the scan list, tum the radio off and on again. 10
eeu Masia}
Instrucciones de funcionamiento sance channel. You cannot datete your pnorty ch Bh 0 cir a channel, peas and hold @D Option 8 Scan ~ allows any one of your radio's programmed channels to be When activity accurs on the priority channel, the scanning oper
~hansre Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073
| P1225_Op_Guide 11 Wed Nov 6 12:30:49 1996
Operating Instructions For transmitting while the radio is in Scan Mode, your dealer can program one of the following two modes:
* Taikback Scan when you press the PTT after the last voice activity on any channel, you can trans-
mit immediately on that channel, even if the channel selector knob is set to a different channel.
* Home Revert Scan - when you press the PTT, your radio transmits on the channel indicated by the channel selector knob. Instrucciones de funcionamiento
- For transmitting while the radio is in Scan Mode, your dealer can program one of the following two modes:
* Talkback Scan ~ when you press the PTT after the jast voice activity on any channel, you can trans-
mit immediately on that channel, even if the channel selector knob is set to a diffarent channel. Home Revert Scan when you press the PTT, your radio transmits on the channel indicated by the channel selector knob. Operating Instructions For transmitting while the radio is in Scan Mode, your dealer can program one of the following two modes:
* Talkback Scan when you press the PTT after the last voice activity on any channel, you can trans-
mit immediately on that channel, even if the channel selector knob is set to a different channel.
* Home Revert Scan when you press the PTT, your radio transmits on the channel indicated by the channel selector knob. EU Asura ery iia le ecme me Miele rents Co}
Operating Instructions Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 12 Wed Nov 6 12:30:49 1996 Operating Instructions
High/Low Power High/Low Power Mode allows you to salect from two power levels programmed by your dealer. Your tadio defaults to High Power Mode when it is turned on. To toggle between high and low power mode:
Press and release GF) Option Button. Q high-pitched tone sounds.
% The LED blinks green every 5 seconds while radio is in Low Power Made. Instrucciones de funcionamiento High/Low Power High/Low Power Mode allows you to select from two power levels programmed by your dealer. Your tadio detaults to High Power Mode when tt is turned on. To toggle between high and low power mode:
1 | Press and release ) Option Button.
! Q 4 high-pitched tone sounds. =
x The LED blinks green every 5 seconds while radio is In Low Power Mode. Operating Instructions High/Low Power High/Low Power Mode allows you to select from two power levels programmed by your dealer. Your tadio defaults to High Power Mode when it is turned on. To toggle between high and low power mode:
Press and release 61) Option Button. QC high-pitched tone sounds.
% The LEO blinks green every 5 seconds while radio is in Low Power Mode. Operating Instructions Instrucciones de funcionamiento folreiiaremiciat ratte td Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 13 Wed Nov 6 12:30:49 1996 Operating Instructions
Tight/Loose Squelch TighvLoose Squeich Made allows you to select from two squelch settings programmed by your dealer. Your radio defaults to Loose Squeich Mode when it is turned on. Tight squelch provides additional pro-
tection from interference, but you may not be able to hear weak transmissions. To toggle between tight and loose squeich mode:
Press and release GFT) Option Button. Q high-pitched tone sounds.
% The LED blinks green every 5 seconds while radio is in Tight Squeich Mode. Instrucciones de funcionamiento
- Tight/Loose Squelch TighLoose Squeich Mode allows you to select from two squelch settings programmed by your dealer. Your radio detaults to Loose Squeich Mode when it is turned on. Tight squeich provides additional pro-
tection from interference, but you may not be able to hear weak transmissions. To toggle between tight and loose squetch mode:
4 | Prass and release Option Button.
= Q high-pitched tone sounds. oS
* The LED biinks green every 5 seconds while radio is in Tight Squelch Mode. Operating Instructions Tight/Loose Squelch Tight/Loose Squelch Mode allows you to select from two squelch settings programmed by your dealer. Your radio defaults to Loose Squelch Mode when it is turned on. Tight squelch provides additional pro-
tection from interference, but you may not be able to hear weak transmissions. To toggle between tight and loose squeich mode:
1 | Press and release GF Cption Button. Cis high-pitched tone sounds. x The LED blinks green every 5 seconds while radio is in Tight Squelch Mode.
Peetu Maia at ed Instrucciones de funcionamiento Operating Instructions
,Ocle Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 14 Wed Nov 6 12:30:49 1996 Operating Instructions Repeater/Tatkaround Repeater/Talkaround Mode gives you the option of using a repeater system for extended range or talk-
ing to other radio users in direct range of your radio without using the repeater. Your radio defaults to Repeater Mode when it is turned on. To toggle between repeater and talkaround mode:
Press and release GT Option Button. eC high-pitched tone sounds. wt The LED blinks green every seconds while radio 1s in Talkaround Mode. Instrucciones de funcionamiento
- Repeater/Talkaround Repeater/Talkaround Mode gives you the Option of using a repeater system for extended range or talk-
ing to other radio users in direct range of your radio without using the repeater. Your radio defaults to Repeater Mode when it is turned on. To toggle between repeater and talkaround mode:
Press and release GF) Option Button. Q A high-pitched tone sounds. a
* The LED blinks green every 5 seconds while radio is in Talkaround Mode. Operating Instructions Repeater/Talkaround Repeater/Talkaround Mode gives you the option of using a repeater system for extended range or talk-
ing to other radio users in direct range of your radio without using the repeater. Your radio defaults to Repeater Mode when it is turned on. To toggle between repeater and talkaround mode:
Press and release ) Option Button. Q A high-pitched tone sounds.
% The LED blinks green every seconds while radio is in Talkaround Mode. eeu MUU cates LSU aren Cy Operating Instructions To toggle batween repeater and talkaround Press and release @ Option Button. CYA high-pitched tone sounds, Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 15 Wed Nov 6 12:30:49 1996
Operating Instructions Optional Programmable Features Telephone Access/Deaccess If your radio is equipped with a keypad, you can automatically access a repeater to place a telephone cail. The keypad also enables you to access a preprogrammed phone list. Access codes are used to dial into the repeater to place a telephone call. Deaccess codes are used to return your radio to conventional operation. You can manually dial these codes, or your dealer can pre-
program them for you. Instrucciones de funcionamiento
- Optional Programmable Features Telephone Access/Deaccess
\f your radio is equipped with a keypad, you can automatically access a repeater to place a telephone call. The keypad also enables you to access a preprogrammed phone list. Access codes are used to dial into the repeater to place a telephone call. Deaccess codes are used to return your radio to conventional operation. You can manually dial these codes, or your dealer can pre-
program them for you. Operating Instructions Optional Programmable Features Telephone Access/Deaccess If your radio is equipped with a keypad, you can automatically access a repeater to place a telephone call. The keypad also enables you to access a preprogrammed phone list. Access codes are used to dial into the repeater to Place a telephone call. Deaccess codes are used to return your radio to conventional operation. You can manually dial these codes, or your dealer can pre-
Program them for you. Operating Instructions Instrucciones de funcionamiento
| Operating Instructions Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 16 Wed Nov 6 12:30:49 1996 Operating Instructions
To place a call using manual access/deaccess codes:
Press and hold the PTT, and dial the access code. a Release the PTT and listen for a dial tone. Press and hold the PTT, and dial the telephone number, oR If your radio has a preprogrammed phone list, press and hold the PTT, press Memory But-
ton, then press the digit that stores your preprogrammed phone number. gu Release the PTT to listen, and press the PTT to talk. When the call is completed, press and hold the PTT and dial the deaccess code. Instrucciones de funcionamiento
- To piace a call using manual accesa/deaccess codes:
a Press and hold the PTT, and dial the access code. 2 | Release the PTT and listen for a dial tone. El Press and hold the PTT, and dial the telephone number, OR It your radio has a preprogrammed phone list, press and hold the PTT, press (@l) Memory But-
ton, then press the digit that stores your preprogrammed phone number. Bi Release the PTT to listen, and press the PTT to talk. 5 | When the call is completed, press and hold the PTT and dial the deaccess code. Operating Instructions To place a call using manual accese/deaccess codes:
Press and hold the PTT, and dial the access code. Release the PTT and listen for a dial tone. Press and hold the PTT, and dial the telephone number, OR If your radio has a preprogrammed phone list, press and hold the PTT, press Memory But-
ton, then press the digit that stores your preprogrammed phone number. Oi Release the PTT to listen, and press the PTT to talk. 5 | When the cail is completed, press and hold the PTT and dial the deaccess code. 16 Operating Instructions Instrucciones de funcionamiento
| Operating Instructions Applicant: Motorola, Inc. Equipment Type:ABZ99FT4073 P1225_Op_Guide 17 Wed Nov 6 12:30:49 1996 Operating Instructions Advantage Board Enable/Disable The Advantage Board Enable/Disable allows you to turn the features of an Advantage Board on or off. Instrucciones de funcionamiento
. Advantage Board Enabie/Disable The Advantage Board Enabie/Disable allows you to turn the features of an Advantage Board on or off. Operating Instructions Advantage Board Enable/Disable The Advantage Board Enable/Disable allows you to turn the features of an Advantage Board on or off. Operating Instructions Operating Instructions i]
attra elses CR lent laced