all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Exhibit D Users Manual per 2 1033 c3 | Users Manual | 1.86 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 |
|
Exhibit D Safety Manual per 2 1033 c3 | RF Exposure Info | 429.90 KiB | ||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Parts List/Tune Up Info | |||||||
1 | Attestation Statements |
1 | Exhibit D Users Manual per 2 1033 c3 | Users Manual | 1.86 MiB |
309N60-O_cvr.qxd 1/9/2003 11:12 AM Page 1 MOTOROLA, the Stylized M Logo, and Radius are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. 2002. All rights reserved. Printed in U.S.A. MOTOROLA, le logotype au M stylis et Radius sont enregistrs auprs du Bureau des marques et brevets des tats-Unis. Tous les autres noms de produits et de services sont la proprit de leurs titulaires respectifs. Motorola, Inc. 2002. Tous droits rservs. Imprim aux tats-Unis.
*6880309N60*
6880309N60-O CP150/CP200 Commercial Series Two-Way Radio User Guide Manuel de l'utilisateur de la radio bidirectionnelle Non-displayTOC.fm Page 1 Thursday, December 19, 2002 5:08 PM CONTENTS Computer Software Copyrights . 2 Safety and Warranty . 3 Product Safety and RF Exposure Compliance . 3 Battery Information . 3 Charging Batteries . 3 Limited Warranty . 4 Radio Overview . 9 Parts of the Radio . 9 CP150/CP200 Models . 9 On/Off/Volume Knob . 10 Channel Selector Knob . 10 Push-to-Talk (PTT) Button . 10 Microphone . 10 LED Indicator . 10 Programmable Buttons . 11 Indicator Tones . 13 Audio Indicators for Programmable Buttons . 14 Improved Audio Features . 14 Companding. 14 Getting Started . 15 Battery Information . 15 C O N T E N T S Charging Your Battery . 15 Wall Charger . 15 Desktop Charger . 16 Accessory Information . 17 Attaching the Battery . 17 Removing the Battery . 17 Attaching the Antenna . 18 Removing the Antenna . 18 Attaching the Belt Clip . 19 Removing the Belt Clip . 19 Turning the Radio On or Off . 20 Adjusting the Volume . 20 Selecting a Radio Channel . 20 Sending a Call . 21 Receiving a Call . 21 Monitoring. 21 VOX Operation . 22 Enable/Disable Headset Sidetone . 22 VOX Headset. 22 Non-VOX Headset with In-Line PTT . 23 Radio Calls . 25 Repeater or Talkaround Mode . 25 Setting Tight or Normal Squelch. 25 Setting the Power Level . 25 Receiving a Selective Call . 26 Receiving a Call Alert Page . 26 1 English Non-displayTOC.fm Page 2 Tuesday, December 17, 2002 2:48 PM S T N E T N O C Scan . 27 Starting or Stopping Scan. 27 Talkback . 27 Deleting a Nuisance Channel . 27 Restoring a Channel to the Scan List . 28 Prioritizing a Scan List Member . 28 Accessories . 29 Carry Accessories. 29 Chargers. 29 Batteries . 29 Headsets . 29 Surveillance Accessories . 30 Remote Speaker Microphones . 31 Antennas . 31 English 2 COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. 10_SafetyNA..fm Page 3 Tuesday, December 17, 2002 2:53 PM SAFETY AND WARRANTY PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE
C a u t i o n Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C98) to ensure compliance with RF energy exposure limits. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/cgiss/
index.shtml. BATTERY INFORMATION Charging Batteries This product is powered by a nickel-cadmium
(NICd) or lithium-ion (Lilon) rechargeable battery. Charge the battery before use to ensure optimum capacity and performance. The battery was designed specifically to be used with a Motorola charger. Charging in non-
Motorola equipment may lead to battery damage and void the battery warranty. Note: When charging a battery attached to a radio, turn the radio off to ensure a full charge. The battery should be at about 77F (25C)
(room temperature), whenever possible. Charging a cold battery (below 50 F [10C]) may result in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery (above 95F [35C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid-rate battery chargers contain a temperature-
sensing circuit to ensure that batteries are charged within the temperature limits stated above. W A R R A N T Y S A F E T Y A N D 3 English 10_SafetyNA..fm Page 4 Thursday, December 19, 2002 5:05 PM LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
MOTOROLA INC. (MOTOROLA) warrants the MOTOROLA manufactured Communication Products listed below (Product) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:
CP150/CP200 Portable Units Product Accessories Two (2) Years One (1) Year Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. D N A Y T E F A S Y T N A R R A W English 4 10_SafetyNA..fm Page 5 Tuesday, December 17, 2002 2:53 PM II. GENERAL PROVISIONS:
III. STATE LAW RIGHTS:
This warranty sets forth the full extent of MOTOROLA's responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLAs option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product
(e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola at 1-800-927-2744 US/Canada. W A R R A N T Y S A F E T Y A N D 5 English 10_SafetyNA..fm Page 6 Tuesday, December 17, 2002 2:53 PM V. WHAT THIS WARRANTY DOES NOT COVER:
A Defects or damage resulting from use of the Product in other than its normal and customary manner. B Defects or damage from misuse, accident, water, or neglect. C Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. D Breakage or damage to antennas unless caused directly by defects in material workmanship. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola's normal warranty inspection and testing of the Product to verify any warranty claim. Product which has had the serial number removed or made illegible. E F G Freight costs to the repair depot. H A Product which, due to illegal or unauthorized alteration of the software/
firmware in the Product, does not function in accordance with MOTOROLAs published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. Normal and customary wear and tear. I J VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
A that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;
D N A Y T E F A S Y T N A R R A W English 6 10_SafetyNA..fm Page 7 Tuesday, December 17, 2002 2:53 PM B that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and C should the Product or parts become, or in MOTOROLAs opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, USA. W A R R A N T Y S A F E T Y A N D 7 English 10_SafetyNA..fm Page 8 Tuesday, December 17, 2002 2:53 PM Notes:
D N A Y T E F A S Y T N A R R A W English 8 03_Overview.fm Page 9 Thursday, December 19, 2002 5:05 PM RADIO OVERVIEW PARTS OF THE RADIO CP150/CP200 Models Push-to-Talk
(PTT) Button Side Button 1
(programmable) Side Button 2
(programmable) On/Off/Volume Knob Channel Selector Knob LED Indicator Microphone Accessory Connector with a Dust Cover I R A D O O V E R V E W I 9 English 03_Overview.fm Page 10 Friday, December 20, 2002 10:55 AM On/Off/Volume Knob Turns the radio on or off, and adjusts the radios volume. Channel Selector Knob Switches the radio to different channels. Push-to-Talk (PTT) Button Press and hold down this button to talk
(transmit); release it to listen. Microphone When sending a message, hold the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth, and speak clearly into it. LED Indicator Indicates power-up, transmit, receive, scan status, Call Alert, Selective Call, and battery status. Basic Features LED State/Color Radio Call Red Flashing Red Scan Flashing Green Call Alert Flashing Yellow Selective Call Flashing Yellow Indication Transmitting Receiving Scanning for activity Indicates receiving a Call Alert Indicates receiving a Selective Call While monitoring Sticky Monitor/Open Squelch Yellow Low Battery Flashing Red when transmitting Available for 4W and 5W models only. Low battery level I W E V R E V O O D A R I English 10 03_Overview.fm Page 11 Tuesday, December 17, 2002 2:22 PM Battery Charge Status You can check battery charge status if your dealer has preprogrammed one of the programmable buttons. Hold down the preprogrammed Battery Indicator button. The charge status is shown by the color of the radios LED indicator. Battery Level LED Indicator Good Sufficient Green Yellow Low Flashing Red Very Low None Programmable Buttons The two side buttons on your radio can be programmed by your dealer as shortcuts to various radio features. Check with your dealer for a complete list of functions your radio supports. Each button can be programmed to select features, depending on the type of button press:
short press quickly pressing and releas-
ing the programmable buttons long press pressing and holding the programmable buttons for a period of time
(default 1 1/2 seconds or programmed value) before releasing hold down pressing and holding down the programmable buttons while checking status or making adjustments Depending on how your radio has been programmed by your dealer, these functions are activated EITHER through a short press OR a long press, but NOT both. A summary of programmable radio features and corresponding page references appears beginning on page 12. In the Feature column, have your dealer write down the programmable buttons next to the features that have been programmed to them. I R A D O O V E R V E W I 11 English
03_Overview.fm Page 12 Tuesday, December 17, 2002 2:22 PM Feature Short Press/Long Press Hold Down Page Button Battery Indicator Checks the battery charge status. 11 Sticky Permanent Monitor A long press of the Monitor button initiates. A short press of the Monitor button cancels. Monitors the selected channel for any activity. Volume Set Sounds a tone for adjusting the radios volume level. Voice Operated Transmis-
sion (VOX) Toggle VOX on and off. Power Level Toggles your radios transmit power level between High and Low power. Repeater/
Talkaround Toggles between using a repeater and transmitting directly to another radio. Squelch Toggles your radios squelch level between tight and normal squelch. Available for 4W and 5W models only. 21 20 22 25 25 25 I W E V R E V O O D A R I English 12 03_Overview.fm Page 13 Tuesday, December 17, 2002 2:22 PM Feature Short Press/Long Press Hold Down Page Button Scan Starts or stops the Scan operation. Nuisance Channel Delete Deletes a nuisance channel while scanning. INDICATOR TONES High pitched tone Low pitched tone Self Test Pass Tone Self Test Fail Tone Positive Indicator Tone Negative Indicator Tone 27 27 AUDIO INDICATORS FOR PROGRAMMABLE BUTTONS Some programmable buttons use tones to indicate one of two modes:
Button Positive Negative Indicator Tone Indicator Tone Scan Power Level Squelch Repeater/
Talkaround VOX Start scan High power selected Tight squelch Does not use repeater VOX enabled Stop scan Low power selected Normal squelch Uses repeater VOX disabled Available for 4W and 5W models only. I R A D O O V E R V E W I 13 English 03_Overview.fm Page 14 Tuesday, December 17, 2002 2:22 PM IMPROVED AUDIO FEATURES Companding Companding is a feature that allows further improvement of voice quality. It compresses your voice at transmission, and expands it when receiving while simultaneously reducing extraneous noise. However, to enjoy this benefit, all transmitting and receiving radios must have this feature activated. I W E V R E V O O D A R I English 14 04_GetStarted.fm Page 15 Tuesday, December 17, 2002 2:39 PM GETTING STARTED To Charge the Battery BATTERY INFORMATION Charging Your Battery If a battery is new, or its charge level is very low, you will need to charge it before you can use it. When the battery level is low and the radio is in transmit mode you will see the LED indicator flash red. Upon release of the PTT button, you will hear an alert tone. Note: Batteries are shipped uncharged from the factory. Always charge a new battery 14 to 16 hours before initial use, regardless of the status indicated by the charger. Note: Do not use the wall charger and desktop charger at the same time when charging. Wall Charger Note: Do not use the wall charger if using a lithium-ion battery. The wall charger is for nickel-cadmium (NiCd) batteries only. 1 2 3 4 Turn the radio off. Lift the dust cover to expose the audio accessory connector. Insert the charging adapter into the accessory connector. Plug the charging adapter into an electrical outlet. The LED on the charging adapter lights Red while the charger is plugged into an electrical outlet. Note: Do not leave the charger connected to the radio when it is not connected to the electrical outlet. 5 Unplug the charger from the electrical outlet and radio after 10 hours. Note: After the initial charge of 14 to 16 hours, do not charge the battery more than 10 hours. I G E T T N G S T A R T E D 15 English D E T R A T S G N T T E G I 04_GetStarted.fm Page 16 Tuesday, December 17, 2002 2:39 PM LED color Flashing Green Green Status Battery 90% (or more) charged. Battery fully charged.
* Remove the battery from the charger and use a pencil eraser to clean the three metal contacts at the back of the battery. Place the battery back in the charger. If the LED indicator continues to flash red, replace the battery. A standard battery may require 90 minutes to charge to 90% capacity. A list of Motorola authorized batteries and battery chargers appears on page 29. The listed chargers will charge only Motorola authorized batteries. Other batteries may not charge. Desktop Charger To Charge the Battery 1 2 Turn the radio off. Place the battery, with or without the radio, in the charger pocket. The charger LED indicates the charging progress. LED color No LED Indication Status Battery inserted incorrectly or battery not detected. Single Green Flash Successful charger Flashing Red*
Red Flashing Yellow power-up. Battery unchargeable or not making proper contact. Battery is charging. Battery in charger but wait-
ing to be charged. The bat-
tery temperature may be too hot or too cold. The voltage may be lower than the pre-
determined threshold level for charging. English 16
04_GetStarted.fm Page 17 Tuesday, December 17, 2002 2:39 PM ACCESSORY INFORMATION Attaching the Battery Removing the Battery Battery Latch I G E T T N G S T A R T E D 1 2 3 Align the battery to the battery rails on the back of the radio (approximately 1/2 in. from the top of the radio.) Press the battery firmly to the radio and slide the battery upward until the latch snaps into place. Slide the battery latch, located on radio bottom, into the lock position. 1 2 Turn off the radio if it is turned on (see page 20). Slide the battery latch into the unlock position. Disengage by pushing downward and holding the latch towards the front of the radio. 3 With the battery latch disengaged, slide the battery down from the top of the radio about 1/2 in. Once the battery is free from the battery rails, lift it directly away from the radio. 17 English 04_GetStarted.fm Page 18 Tuesday, December 17, 2002 2:39 PM Attaching the Antenna Removing the Antenna D E T R A T S G N T T E G I Turn the antenna clockwise to attach it. Turn the antenna counter-clockwise to remove it. English 18 04_GetStarted.fm Page 19 Tuesday, December 17, 2002 2:39 PM Attaching the Belt Clip Removing the Belt Clip Belt Clip Tab I G E T T N G S T A R T E D 1 2 Align the grooves of the belt clip with those of the battery. Press the belt clip downward until you hear a click. 1 2 Use a key to press the belt clip tab away from the battery to unlock the belt clip. Slide the belt clip upward to remove it. 19 English D E T R A T S G N T T E G I 04_GetStarted.fm Page 20 Tuesday, December 17, 2002 2:39 PM TURNING THE RADIO ON OR OFF ADJUSTING THE VOLUME 1 2 3 Hold down the Volume Set button (see page 12); you will hear a continuous tone. Turn the On/Off/Volume Control knob to the desired volume level. Release the Volume Set button. SELECTING A RADIO CHANNEL Your radio offers 4 or 16 channels. Note: Due to government regulations, some channels may not be programmed. Ask your dealer for more information. To select a channel, turn the Channel Selector knob clockwise or counterclockwise until you reach the desired channel. ON OFF Turn the On/Off/
Volume Control knob counter-clockwise until you hear a click. Turn the On/Off/
Volume Control knob clockwise. If power-up is successful, you will hear the Self-Test Pass Tone
) and see the LED flash green. If the radio fails to power up, you will hear the Self Test Fail Tone
). English 20 04_GetStarted.fm Page 21 Tuesday, December 17, 2002 2:39 PM SENDING A CALL 1 2 3 4 Turn your radio on. Use the Channel Selector knob to select the desired channel. Hold the radio in a vertical position, press the PTT, and talk at a distance of about 1 to 2 inches (2.5 to 5 cm) from the microphone. Release the PTT to listen. RECEIVING A CALL 1 2 3 Turn your radio on. Adjust the radios volume (see page 20). Switch to the desired channel. To respond, hold the radio in a vertical position, press the PTT, and talk at a distance of about 1 to 2 inches (2.5 to 5 cm) from the microphone. MONITORING It is important to monitor traffic before transmitting to ensure that you do not talk over someone who is already transmitting. 1 Press and hold the preprogrammed Monitor button to access channel traffic. 2 Once channel traffic has cleared, proceed with your call by pressing the PTT button. 3 A long press of the preprogrammed Monitor button places the radio in Sticky Permanent Monitor mode.
You hear a high-pitched tone. A short press of the Monitor button cancels Sticky Permanent Monitor mode and returns the radio to normal operation. I G E T T N G S T A R T E D 21 English 04_GetStarted.fm Page 22 Tuesday, December 17, 2002 2:39 PM VOX OPERATION When hands-free operation is desired, your radio can be activated by voice alone using the VOX feature when you speak through an accessory that is connected to your radio. Connecting a VOX Headset D E T R A T S G N T T E G I 4 Select a channel that has not been preprogrammed by your dealer to disable VOX. ENABLE/DISABLE HEADSET SIDETONE Your dealer can program your radio to hear your voice through the headset during transmit. Turn off your radio. 1 2 3 Connect the VOX accessory to your radio and turn the radio on. VOX Headset 1 2 3 Turn off your radio. Connect the VOX accessory to your radio. Turn the radio on. During transmit, the sidetone will be enabled, if programmed in the radio. To enable or disable VOX operation, press the preprogrammed VOX button (see page 12). Note: Pressing the PTT button disables VOX. or Select a channel that has been preprogrammed by your dealer to enable VOX. Note: You do not need to press a prepro-
grammed VOX button. Note: Pressing the PTT button disables VOX. English 22 04_GetStarted.fm Page 23 Tuesday, December 17, 2002 2:39 PM Non-VOX Headset with In-Line PTT 1 2 3 4 5 Turn off your radio. Connect the non-VOX accessory to your radio. Press and hold the In-line PTT on your headset. Turn the radio on and release the PTT once the radio has completed start-up. To disable the headset sidetone, turn off your radio and turn the radio on again. I G E T T N G S T A R T E D 23 English 04_GetStarted.fm Page 24 Tuesday, December 17, 2002 2:39 PM Notes:
D E T R A T S G N T T E G I English 24 05_RadioCall.fm Page 25 Tuesday, December 17, 2002 2:40 PM In this case, normal squelch may be more desirable. Press the preprogrammed Squelch button
(see page 12) to toggle between tight and normal squelch. SETTING THE POWER LEVEL
(Available for 4W and 5W models only) Each channel in your radio has a predefined transmit power level that can be changed.
High power allows you to reach a radio that is farther away. Low power conserves the batterys charge. Press the preprogrammed Power Level button
(see page 12) to toggle between low and high power. RADIO CALLS REPEATER OR TALKAROUND MODE Talkaround Mode enables you to communicate with another radio when either:
the repeater is not operating or your radio is out of the repeaters range but within communicating distance of another radio. Press the preprogrammed Repeater/
Talkaround button (see page 12) to toggle between Repeater mode and Talkaround Mode. SETTING TIGHT OR NORMAL SQUELCH Use this feature to filter out nuisance
(unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. I R A D O C A L L S 25 English
05_RadioCall.fm Page 26 Friday, December 20, 2002 10:55 AM RECEIVING A SELECTIVE CALL
(Available for 4W and 5W models only) When you receive a selective call:
The LED indicator flashes yellow, if pro-
grammed by your dealer.
You hear two high pitched tones. To answer the call, press the PTT button. RECEIVING A CALL ALERT PAGE
(Available for 4W and 5W models only) When you receive a Call Alert page:
The LED indicator flashes yellow, if pro-
grammed by your dealer.
You hear four high pitched tones. To answer the page, press the PTT button; to cancel the page, press any other key. S L L A C O D A R I English 26 06_Scan.fm Page 27 Tuesday, December 17, 2002 2:40 PM SCAN You can monitor multiple channels and receive any calls that are transmitted on them. Channels can be programmed into a scan list by your dealer. Your radio automatically switches to a scan list channel when it detects activity on it. STARTING OR STOPPING SCAN The LED indicator blinks green during a scan operation and stops blinking when the radio switches to a channel. You can start or stop a scan operation by:
1 2 To start or stop a scan operation, press the preprogrammed Scan button (see page 12).
- or -
Select a channel that has been preprogrammed by your dealer to start Auto Scan. Note: You do not need to press a prepro-
grammed Scan button. 3 Select a channel that has not been preprogrammed by your dealer to stop Auto Scan. TALKBACK If the Talkback option is preprogrammed, you can respond to any calls received during the scan operation. To respond, press the PTT button before the programmed hangtime elapses. Otherwise, the radio will continue scanning. Check with your dealer for details. DELETING A NUISANCE CHANNEL Note: Your dealer must have preprogrammed a button to Nuisance Delete (see page 12) to access this feature. If a channel continually generates unwanted calls or noise (a nuisance channel), you can temporarily remove it from the scan list:
1 While the radio is on the Nuisance Channel, press the preprogrammed Nuisance Channel Delete button until you hear a tone. 2 Release the Nuisance Channel Delete button. The nuisance channel is deleted. S C A N 27 English 06_Scan.fm Page 28 Tuesday, December 17, 2002 2:40 PM Note: You cannot delete a priority channel or last remaining channel in the scan list. Restoring a Channel to the Scan List Even though your radio has switched to a non-
priority channel, it will still check for activity on the priority channel. If activity is detected, the radio will switch to the priority channel. 1 2 Press the Scan button to stop the scan. Press the Scan button again to start scanning again. The Deleted Nuisance Channel is restored to the scan list. PRIORITIZING A SCAN LIST MEMBER You may want your radio to scan a specific channel more frequently for calls. Your dealer can prioritize scan list members for you. Check with your dealer for details. Priority Channel Scanning Sequence None specified Ch1 Ch2 Ch3 Ch4
...Ch1 Channel 2 Ch2 Ch1 Ch2 Ch3 Ch2 Ch4 Ch2
...Ch1 N A C S English 28 11_Accessory.fm Page 29 Tuesday, December 17, 2002 2:54 PM A C C E S S O R E S I ACCESSORIES Motorola offers a number of accessories to enhance the productivity of your two-way radio. Many of the available accessories are listed below. CARRY ACCESSORIES HLN9701 RLN5383 RLN5384 RLN5385 HLN8255 HLN6602 1505596Z02 RLN4570 RLN4815 4280384F89 Nylon Case with Belt Loop and D-Shaped Rings Hard Leather Case with Belt Loop and D-Shaped Rings Hard Leather Case with High Activity 2-1/2 inch Swivel Belt Loop Hard Leather Case with High Activity 3 inch Swivel Belt Loop 3 inch Spring Action Belt Clip Universal Chest Pack Replacement Strap for HLN6602 Universal Chest Pack Universal Break-A-Way Chest Pack Universal RadioPak Replacement Belt Lengthener for RLN4815 Universal RadioPak NTN5243 Shoulder Strap for Hard Leather Cases (attaches to D-Shaped Rings on case) CHARGERS WPLN4138 Desktop Charger w/US NA Plug BATTERIES NNTN4496_R NNTN4497_R NiCd, 1100 maH Li-Ion, 1800 maH HEADSETS RLN5411 PMMN4001 HMN9013 RMN4016 RLN5238 HMN9021 HMN9022 Ultra-Lite Breeze Behind the Head Headset Ultra-Lite Earset with Mic and PTT Lightweight Headset w/o In-line PTT Lightweight Headset with In-line PTT Lightweight Headset with In-line PTT, NFL Style Medium Weight Over the Head Dual Muff Headset Medium Weight Behind the Head Dual Muff Headset 29 English 11_Accessory.fm Page 30 Tuesday, December 17, 2002 2:54 PM I S E R O S S E C C A BDN6647 BDN6648 5080371E66 RMN5015 REX4648 RKN4090 Medium Weight Single Speaker Headset Heavy Duty Dual Muff Headset with Noise Canceling Microphone Replacement Ear Pad for BDN6647 Heavy Duty Dual Muff Racing Headset (requires RKN4090 Headset Adapter Cable) Ear Pad and Windscreen Kit Adapter Cable for use with RMN5015 SURVEILLANCE ACCESSORIES HMN9752 HMN9727 RLN4894 HMN9754 RLN4895 Earpiece with Volume Control, 1-Wire (plastic earloop) (Beige) Earpiece without Volume Control, 1-Wire (plastic earloop) (Beige) Earpiece without Volume Control, 1-Wire (plastic earloop) (Black) Earpiece with Microphone & PTT Combined, 2-Wire (Beige) Earpiece with Microphone & PTT Combined, 2-Wire (Black) RLN5198 BDN6720 HMN9036 HLN9132 NTN8370 NTN8371 RLN4760 RLN4763 RLN4761 RLN4764 RLN4762 RLN4765 Earpiece with Microphone & PTT Combined (Black) including Low Noise Kit, 2-Wire Surveillance Kit w/
Clear Comfortable Acoustic Tube
(includes NTN8371) Flexible Ear Receiver (RX only) Earbud with Microphone & PTT Combined, 2-Wire (Black) Earbud Single Wire Receive Only
(Black) Extreme Noise Kit Low Noise Kit Small Custom Clear Earpiece, Right Ear Small Custom Clear Earpiece, Left Ear Medium Custom Clear Earpiece, Right Ear Medium Custom Clear Earpiece, Left Ear Large Custom Clear Earpiece, Right Ear Large Custom Clear Earpiece, Left Ear English 30 11_Accessory.fm Page 31 Tuesday, August 19, 2003 10:49 AM REMOTE SPEAKER MICROPHONES HMN9030 RLN4904 Remote Speaker Microphone Mic Jacket for HMN9030 Remote Speaker Microphone ANTENNAS NAD6502 HAD9742 HAD9743 NAE6522 8505815K26 NAE6483 VHF Heliflex Antenna 14cm, 146-174 MHz VHF Stubby Antenna, 9cm, 146-162 MHz VHF Stubby Antenna, 9cm, 162-174 MHz UHF Heliflex Stubby Antenna 9cm, 438-470 MHz UHF Heliflex Stubby Antenna 7.1cm, 470-520 MHz Flexible Whip Antenna, 403-520 MHz A C C E S S O R E S I 31 English 11_Accessory.fm Page 32 Tuesday, December 17, 2002 2:54 PM Notes:
I S E R O S S E C C A English 32 12_QR-Card.fm Page 33 Friday, December 20, 2002 10:56 AM LED Indicators Indication Scanning for activity Low battery level Transmitting Receiving LED State/Color Radio Call Red Flashing Red Scan Flashing Green Low Battery Flashing Red when sending message Call Alert Flashing Yellow Selective Call Flashing Yellow Sticky Monitor/
Open Squelch Yellow Battery Charge Status Green Yellow Flashing Red None Available for 4W and 5W models only. Good Sufficient Low Very Low While monitoring. Indicates receiving a Call Alert Indicates receiving a Selective Call CP150/CP200 Quick Reference Card On/Off/Volume Knob Channel Selector Knob PTT 1 SP:
LP:
2 SP:
LP:
LED Indicator Microphone NOTE: Enter the functions for your radios two programmable buttons in the boxes provided above. SP represents Short Press, while LP represents Long Press. 12_QR-Card.fm Page 34 Tuesday, December 17, 2002 2:21 PM Turning On the Radio
Turn On/Off/Volume Control knob clockwise. If the radio successfully powers up, you will hear the Self Test Pass tone and see the LED light green. If the radio fails to power up, you will hear the Self Test Fail tone. Turning Off the Radio
Turn On/Off/Volume Control knob counter-
clockwise until you hear a click. Adjusting the Radio Volume 1. Press and hold Volume Set button (preprogrammed by your dealer) until you hear a continuous tone. 2. Turn On/Off/Volume Control knob to adjust volume level. 3. Release Volume Set button at desired volume level. Selecting a Radio Channel
Turn Channel Selector knob clockwise or counter-
clockwise to reach desired channel. Sending a Call 1. With radio on, turn Channel Selector knob to required channel. 2. Press PTT and speak clearly with mouth about 2.5 to 5 cm (1 to 2 inches) away from microphone. 3. Release PTT when call is completed. Receiving a Call 1. Turn on the radio. 2. Adjust the volume level. 3. Select the radio channel. Audio Indicators for Programmable Buttons Programmable Buttons Positive Indicator Tone Negative Indicator Tone Scan Power Level Squelch Repeater/
Talkaround VOX Start Scan operation Stop Scan operation Radio transmits at high power Radio transmits at low power Radio operates in tight squelch Radio DOES NOT use the repeater Radio operates in normal squelch Radio uses the repeater VOX enabled VOX disabled Available for 4W and 5W models only. Starting or Stopping Scan 1. Press the preprogrammed Scan button to start scan. The LED indictor blinks green during scan operation. Or, select a channel that has been preprogrammed to start Auto Scan. 2. Press the Scan button again to stop scan. Or, select a channel that has not been preprogrammed to stop Auto Scan. Deleting a Nuisance Channel 1. With radio on a Nuisance Channel, press and hold the preprogrammed Nuisance Delete button until you hear a tone. 2. Release the Nuisance Delete button. 309N60-A_cvr.qxd 8/19/2003 10:43 AM Page 1 MOTOROLA, the Stylized M Logo, and Radius are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. 2002, 2003. All rights reserved. Printed in U.S.A. MOTOROLA, le logotype au M stylis et Radius sont enregistrs auprs du Bureau des marques et brevets des tats-Unis. Tous les autres noms de produits et de services sont la proprit de leurs titulaires respectifs. Motorola, Inc. 2002, 2003. Tous droits rservs. Imprim aux tats-Unis.
*6880309N60*
6880309N60-A CP150/CP200 Commercial Series Two-Way Radio User Guide Manuel de l'utilisateur de la radio bidirectionnelle
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-08-22 | 465 ~ 495 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-08-22
|
||||
1 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0025009739
|
||||
1 | Physical Address |
1303 East Algonquin Road
|
||||
1 |
Schaumburg, Illinois 60196
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
d******@elitetest.com
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ABZ
|
||||
1 | Equipment Product Code |
99FT4058
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R****** S****
|
||||
1 | Telephone Number |
847-3********
|
||||
1 | Fax Number |
847-5********
|
||||
1 |
B******@motorolasolutions.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Motorola, Inc.
|
||||
1 | Name |
J****** M******** Z****
|
||||
1 | Physical Address |
1313 East Algonquin Rd
|
||||
1 |
Schaumburg, Illinois 60196
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
847-5********
|
||||
1 |
j******@motorola.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CP200 UHF Portable Radio | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the two antennas tested for this filing in Push to Talk and body worn configurations. Body worn SAR compliance is limited to the specific belt clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values are Head: 2.12W/kg; Body worn: 4.72W/kg with 50% duty cycle. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
n/a | ||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22,74,90,90.21 | BF | 465 | 495 | 4.6 | 2.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 2 | 22,74,90,90.21 | BF | 465 | 495 | 4.6 | 2.5 ppm | 16K0F3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC