FCC ID: ABZ89FT7638 Fixed Outdoor Wireless

PMP 400/430 Series Networks PTP 200/230 Series Bridges Issue 6 August 2011 Notices See important safety notice on exposure distance in Section 6.3 on page 71. See important regulatory and legal notices in Section 6 on page 64. Trademarks, Product Names, and Service Names MOTOROLA SOLUTIONS, the stylized M Logo, Canopy, and all other trademarks indicated as such herein are registered trademarks of Motorola, Inc. Reg. US Pat & Tm. Office. All other product or service names are the property of their respective owners. 2011 Motorola Solutions, Inc. All rights reserved http://www.motorola.com/canopy http://motorola.wirelessbroadbandsupport.com PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table of Contents 1 Introduction ............................................................................................................... 6 1.1 Document Change History ................................................................................. 7 1.2 Abbreviations ..................................................................................................... 8 1.3 Feedback on Documentation ............................................................................. 9 1.4 Technical Support .............................................................................................. 9 2 Product Description ................................................................................................ 11 2.1 Technology and Benefits ................................................................................. 22 2.1.1 nLOS Benefits and Limitations .......................................................................... 22 2.2 Applications ..................................................................................................... 23 2.3 Configuration Options RF, IP, DFS ............................................................... 24 2.4 Power and Grounding ...................................................................................... 24 2.5 Administration Systems ................................................................................... 25 2.6 Specifications .................................................................................................. 26 2.6.1 Radio specifications (common to all formats) ................................................... 26 2.6.2 Specifications for PMP 430 (5.4 & 5.8-GHz) SM and PTP 230 (5.4 & 5.8-GHz) BH radio with integrated antenna ................................................................................... 27 2.6.3 Specifications for PMP 400 (4.9 & 5.4-GHz) AP/SM and PTP 200 (4.9 & 5.4-

GHz) BH radio with integrated antenna .......................................................................... 28 2.6.4 Specification for PMP 400/430 AP and PTP 200 BH connectorized radio ....... 29 2.6.5 Specifications for PMP 400/430 kitted, connectorized radio (antenna included)29 2.7 Performance .................................................................................................... 31 3 Configuring .............................................................................................................. 41 3.1 Link Operation 1X/2X/3X .............................................................................. 41 3.2 Transmitter Output Power (and no Jitter) ......................................................... 42 3.3 Downlink Data %, Range, and Control Slots .................................................... 44 3.4 DFS and Regulatory Parameters for 5.8 & 5.4 GHz Radios ............................. 46 3.4.1 Background and Operation ............................................................................... 46 3.4.2 Setting DFS and Regulatory Parameters .......................................................... 48 3.5 External Gain Field .......................................................................................... 52 3.6 Network Control Parameters ........................................................................... 53 3.7 Forward Error Correction ................................................................................. 53 3.8 Cyclic Prefix (Configurable only on PTP 200/230 BH & PMP 430 AP/SM) ....... 53 4 Installation ............................................................................................................... 55 4.1 Installing an AP with Connectorized Antenna .................................................. 55 Issue 6.0 May 2011 Page 2 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 4.2 Installing an SM or BH with an Integrated Antenna .......................................... 62 5 Regulatory and Legal Notices ................................................................................ 64 5.1 Important Note on Modifications ...................................................................... 64 5.2 National and Regional Regulatory Notices....................................................... 64 5.2.1 U.S. Federal Communication Commission (FCC) Notification ......................... 64 5.2.2 Industry Canada (IC) Notification ...................................................................... 67 5.2.3 Regulatory Requirements for CEPT Member States (www.cept.org) ............... 68 5.2.4 European Union Notification for 5.8 GHz Product ............................................ 69 5.2.5 Equipment Disposal .......................................................................................... 69 5.2.6 EU Declaration of Conformity for RoHS Compliance ........................................ 69 5.2.7 UK Notification ................................................................................................... 69 5.2.8 Luxembourg Notification.................................................................................... 69 5.2.9 Czech Republic Notification .............................................................................. 70 5.2.10 Greece Notification ............................................................................................ 70 5.2.11 Brazil Notification ............................................................................................... 70 5.2.12 Labeling and Disclosure Table for China .......................................................... 70 5.3 Exposure Separation Distances ....................................................................... 71 5.3.1 Details of Exposure Separation Distances Calculations and Power Compliance Margins ....................................................................................................... 71 5.4 Legal Notices ................................................................................................... 73 5.4.1 Software License Terms and Conditions .......................................................... 73 5.4.2 Hardware Warranty in US ................................................................................. 75 5.5 Limit of Liability ................................................................................................ 75 List of Tables Table 1: Motorola PMP 400/430 and PTP 200/230 Series............................................. 12 Table 2: 5.8GHz OFDM - PMP 430 and PTP 230 Series Model Number Descriptions .. 12 Table 3: 5.4GHz OFDM - PMP 430 Series Model Number Descriptions ........................ 14 Table 4: 5.4GHz OFDM - PMP 400 and PTP 200/230 Model Number Descriptions ...... 15 Table 5: 4.9GHz OFDM - PMP 400 and PTP 200 Model Number Descriptions ............. 16 Table 6: CMM4 56VDC and 30 VDC Operation ............................................................. 17 Table 7: Ancillary Equipment and Model Numbers ........................................................ 20 Table 8: Performance Details ........................................................................................ 32 Issue 6.0 May 2011 Page 3 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 9: PMP 400/430 and PTP 200/230 Tx output power ............................................ 42 Table 10: PMP 400/430 AP Control Slot Settings .......................................................... 45 Table 11: 5.4 / 5.8 GHz OFDM DFS Operation based on Region Code ........................ 47 Table 12: US FCC IDs and Industry Canada Certification Numbers and Covered Configurations ........................................................................................................ 65 Table 13: Disclosure Table ............................................................................................ 71 Table 14: Exposure Separation Distances ..................................................................... 71 Table 15: Calculated Exposure Distances and Power Compliance Margins .................. 72 List of Figures Figure 1: PMP 430 CAP 54430 & 58430 ......................................................................... 6 Figure 2: PMP 400 CAP 54400 - 5.4 GHz ....................................................................... 6 Figure 3: PMP 400 CAP 49400 - 4.9 GHz ....................................................................... 6 Figure 4: PMP 430 CSM 54430 & 58430 ......................................................................... 6 Figure 5: PMP 400 CSM 54400 - 5.4GHz ........................................................................ 6 Figure 6: PMP 400 CSM 49400 - 4.9 GHz ....................................................................... 6 Figure 7: PTP 200 Integrated .......................................................................................... 7 Figure 8: PTP 200 Connectorized ................................................................................... 7 Figure 9: PTP 230 Integrated .......................................................................................... 7 Figure 10: CMM4 56 VDC Power Supply ...................................................................... 18 Figure 11: CMMmicro and CMM4 30 VDC Power Supply ...................................... 18 Figure 12: CMM4 - 56 VDC and 30 VDC terminal blocks .............................................. 18 Figure 13: 600SS Surge Suppression AP and SM diagram ........................................... 19 Figure 14: LOS, nLOS, and NLOS ................................................................................ 23 Figure 15: AP Grounding Lug ........................................................................................ 25 Figure 16: 600SS pole mount kit ................................................................................... 25 Figure 17: PMP 430 SM ................................................................................................ 28 Figure 18: PMP 430 SM with Optional LENS ................................................................ 28 Figure 19: PMP 400 and PTP 200 radio with integrated antenna .................................. 29 Figure 20: PMP 400/430 and PTP 200 BH connectorized radio .................................... 29 Figure 21: CAP 49400 ................................................................................................... 30 Figure 22: CAP 58430 and 54430 ................................................................................. 30 Figure 23: Dynamic Rate Adapt on AP "Configuration => General" page ...................... 41 Figure 24: SM Power Level on AP Home => Session Status page. ........................... 44 Figure 25: Max Range & Downlink Data on AP "Configuration => Radio" page. ........... 45 Issue 6.0 May 2011 Page 4 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 26: DFS Status on AP "Home => DFS Status" page. ........................................ 46 Figure 27: Region Code on AP Configuration => General page .................................. 50 Figure 28: Configured Region Code on SM Configuration => General page ................. 51 Figure 29: Active Region Code on SM Home => General Status page .......................... 51 Figure 30: Ground lug highlighted on AP ....................................................................... 61 Figure 31: Dielectric Grease Apply to RJ45 connector ............................................... 62 Figure 32: Dielectric Grease - Insert Ethernet Cable ..................................................... 63 List of Procedures Procedure 1: Assembling a 5.8 or 5.4 GHz AP, and attaching to tower ......................... 56 Procedure 2: Assembling a 4.9 GHz AP, and attaching to tower ................................... 58 Procedure 3: Cabling and Grounding/Earthing the AP ................................................... 61 Issue 6.0 May 2011 Page 5 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 1 Introduction This guide provides product configuration information specific to the PMP 400/430 Series networks and PTP 200/230 Series bridges in 5.8-GHz, 5.4-GHz and 4.9-GHz bands. Note: PMP 400 5.4-GHz Series is replaced with PMP 430 5.4-GHz Series. PMP 430 Series 5.4 & 5.8 GHz PMP 400 Series PMP 400 Series 5.4 GHz 4.9 GHz Figure 1: PMP 430 CAP Figure 2: PMP 400 CAP 54400 Figure 3: PMP 400 CAP 54430 & 58430

- 5.4 GHz 49400 - 4.9 GHz Figure 4: PMP 430 CSM 54430 & 58430 Figure 5: PMP 400 CSM 54400 Figure 6: PMP 400 CSM

- 5.4GHz 49400 - 4.9 GHz Integrated and Connectorized Integrated and Connectorized Issue 6.0 May 2011 Page 6 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement PTP 200 Series Backhauls 5.4 and 4.9 GHz Figure 7: PTP 200 Integrated Figure 8: PTP 200 Connectorized PTP 54200 and 49200 PTP 54200 and 49200 PTP 230 Series Backhauls 5.4 and 5.8 GHz Figure 9: PTP 230 Integrated PTP 54230 and 58230 This guide should be used along with the Motorola PMP Solutions User Guide, which covers general information, including all network features, RF control features, and GUI (Graphical User Interface) features common across PMP 100, 400, and 500 Series networks and PTP 100 and 200 Series bridges. The Motorola PMP Solutions User Guide is available from the User Guides section of the Canopy Document Library, http://motorola.motowi4solutions.com/support/library/?region=1&cat=8. This guide assumes that the reader has general RF (Radio Frequency) and Internet Protocol (IP) knowledge and background. This issue, Issue 6, is consistent with features provided by Canopy Release 11.0.1 (and consistent with features provided by PTP 230 Canopy Release 10.7). Separate Release Notes for each release are available and include open issues and other important information specific to each release. R11.0.1 and R10.7 Software and software release notes can be downloaded from the Motorola support web site: http://motorola.wirelessbroadbandsupport.com/software/. 1.1 DOCUMENT CHANGE HISTORY Issue 1 First Issue Issue 2 Added the following:

PTP 200 Series 5.4-GHz BHs PMP 400 and PTP 200 Products using AES encryption Issue 6.0 May 2011 Page 7 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Software Release 8.4.3 features Issue 3 Added the following 4.9-GHz public safety band products:

PTP 200 Series 4.9-GHz BHs PMP 400 Series 4.9-GHz APs and SMs Software Release 9.4.2 features Issue 4 Added the following:

Software Release 9.5 features to support PMP 400 and PTP 200 PMP 430 Series 5.8-GHz APs and SMs Software Release 10.0 features to support PMP 430 (10MHz channel) Updated customer support email and phone numbers Issue 5 Added the following:

PMP 430 Series 5.4-GHz AP and SM PMP 430 Series (5.4 and 5.8-GHz OFDM) with Release 10.3 o Configurable 5, 10 and 20 MHz channel bandwidth Note: PMP 400 Series 5.4-GHz OFDM supports 10MHz channels. o 2.5MHz center channels when configured for 5MHz channel bandwidth o Added support for 1/16 Cyclic Prefix in addition to 1/4 and 1/8 Note: PMP 400 Series 5.4-GHz OFDM supports 1/4 Cyclic Prefix o Increased Packets Per Second (PPS) from 6,800 to 15,000 PPS o 802.1ad Q-in-Q DVLAN (Double VLAN) tagging o Dynamic Rate Adapt configurable (1X, 2X, 3X) uplink/downlink rate PMP 400 and PTP 200 Series with Release 10.3 o 802.1ad Q-in-Q DVLAN (Double VLAN) tagging o Dynamic Rate Adapt configurable(1X, 2X, 3X) uplink/downlink rate Issue 6 Added the following:

PTP 230 Series 5.4 and 5.8-GHz BHM and BHS 1.2 ABBREVIATIONS The following abbreviations may be used in these notes:

1X 2X 3X AES AP BH BHM BHS CAP CIR CMM CNUT CSM DES DFS 1X (QPSK) modulation 2X (16 QAM) modulation 3X (64 QAM) modulation Advanced Encryption Standard Access Point Module Backhaul Module, either timing master or timing slave Backhaul Module Master Backhaul Module Slave Access Point Module Committed Information Rate Cluster Management Module (CMM4 or CMMicro) Canopy Network Updater Tool Subscriber Module Data Encryption Standard Dynamic Frequency Selection for radar avoidance Issue 6.0 May 2011 Page 8 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement DHCP DiffServ Dynamic Host Configuration Protocol Differentiated Services EIRP ETSI EU FCC FSK GHz GPS LoS MIB MIR NAT nLoS NLoS OFDM PMP PPS PTP QAM QPSK RF SM VDC VLAN Equivalent Isotropically Radiated Power European Telecommunications Standards Institute European Union Federal Communications Commission (United States) Frequency Shift Keying Gigahertz Global Positioning System Note: CMM uses GPS to synchronize APs & BHs Line of Sight Management Information Base for SNMP Maximum Information Rate Network Address Translation Near Line of Sight Non Line of Sight Orthogonal Frequency Division Multiplexing Point-to-Multi-Point (AP to SMs) Packet Per Second Point-to-Point (Backhauls) Quadrature Amplitude Modulation Quadrature Phase Shift Keying Radio Frequency Subscriber Module Volts Direct Current Virtual Local Area Network FEEDBACK ON DOCUMENTATION 1.3 Is this document accurate, complete, and clear? How can it be improved? Please send your feedback on Canopy documentation to technical-documentation@canopywireless.com. TECHNICAL SUPPORT 1.4 Tip! Do not clear the Event Log after you encounter issues. It may be useful to Technical Support, if you need to escalate the issue. Here is the escalation path for resolution of a problem:

1. Check documentation:

this document Canopy System Release 8 Users Guide, available at http://motorola.wirelessbroadbandsupport.com/software. 2. Consider checking the Community Forum and Knowledge Base at http://motorola.wirelessbroadbandsupport.com/support/community. 3. Escalate the problem to your Canopy supplier or reseller. 4. Escalate the problem to Canopy Technical Support or other designated Tier 3 technical support:

Issue 6.0 May 2011 Page 9 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement U.S. and Canada Email: technical-support@canopywireless.com 1-866-961-9288 Latin and Central America Europe, Middle East, and Africa Asia Pacific Email: technical-support@canopywireless.com Argentina Brazil Columbia Mexico Peru All other countries +420 533 336 946 0800-666-2789 0800-891-4360 01-800-912-0557 001-800-942-7721 0800-70-086 Email: essc@motorola.com Denmark France Germany Italy Lithuania Netherlands Norway Portugal Spain Russia Saudi Arabia South Africa United Kingdom 043682114 0157323434 06950070204 0291483230 880 030 828 0202061404 24159815 0217616160 0912754787 810 800 228 41044 800 844 5345 0800981900 0203 0277499 Email: WiBBsupport.apac@motorola.com

+6048503854 (9am - 5pm Malaysia Time)

+420 533 336 946 (outside hours) When you send e-mail or call, please include, as appropriate, software release on each module, IP addresses, MAC addresses, and features enabled, like NAT, VLAN, high priority channel, or CIR. You may be asked to run the Support Tool on CNUT or Prizm to provide a complete network picture. Issue 6.0 May 2011 Page 10 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 2 Product Description PMP 400/430 Series networks and PTP 200/230 Series bridges add OFDM-based (Orthogonal Frequency Division Multiplexing) products to the Canopy family. PMP 430 5.4 and 5.8-GHz SMs as shown in Figure 4 on page 6 use the Canopy SM form factor with an integrated antenna. PMP 400 5.4-GHz SMs as shown in Figure 5 on page 6 are available with either an integrated antenna or an external N-type connector on a short length of coaxial cable for connecting to a connectorized antenna. PMP 400 5.4-GHz AP and PMP 430 5.4 and 5.8-GHz APs as shown on page 6 are always connectorized, and sold either as a radio with a connectorized antenna as a kit, or as a radio with an external N-type connector on a short length of coaxial cable for connecting to an operator-provided antenna. U.S. customers must use the kit version since the FCC requires the radio to be regulatory certified with the connectorized antenna. PTP 200 5.4 and 4.9-GHz BHs as shown in Figure 7 and Figure 8 on page 7 are available with either an integrated antenna or an external N-type connector on a short length of coaxial cable for connecting to a connectorized antenna. PTP 230 5.4 and 5.8-GHz BHs as shown in Figure 9 on page 7 use the Canopy SM form factor with an integrated antenna. PMP 400/430 Series networks are available in multiple bands:

PMP 58430 APs and SM provide connectivity in the unlicensed 5.8 GHz band. PMP 54430 APs and SMs provide connectivity in the unlicensed 5.4 GHz band. PMP 54400 APs and SMs provide connectivity in the unlicensed 5.4 GHz band. PMP 49400 APs and SMs provide connectivity in the licensed 4.9 GHz band allocated to public safety services. State and local governmental entities are eligible to hold 4.9 GHz licenses. PTP 200/230 Series networks are available in multiple bands:

PTP 54200 BHs provide connectivity in the unlicensed 5.4 GHz band. PTP 49200 BHs provide connectivity in the licensed 4.9 GHz band allocated to public safety services. State and local governmental entities are eligible to hold 4.9 GHz licenses. PTP 54230 BHs provide connectivity in the unlicensed 5.4 GHz band. PTP 58230 BHs provide connectivity in the unlicensed 5.8 GHz band. Issue 6.0 May 2011 Page 11 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 1 shows the Motorola PMP 400/430 Series and PTP 200/230 Series of products by frequency band, channel bandwidth, cyclic prefix and current software version. Table 1: Motorola PMP 400/430 and PTP 200/230 Series Frequency PMP Series PTP Series Channel Bandwidth

(Point-to-

MultiPoint)

(Point-To-Point) PMP Series PTP Series Cyclic Prefix PTP 230 Series

-58230 5, 10 or 20MHz 10 or 20MHz 1/4, 1/8 or 1/16 Software Version PMP Series PTP Series 11.0.1 10.7 PTP 230 Series

-54230 5, 10 or 20MHz 10 or 20MHz 1/4, 1/8 or 1/16 11.0.1 10.7 PTP 200 Series 10MHz 10MHz 1/4 11.0.1 11.0.1

- 54200 PTP 200 Series

- 49200 10MHz 10MHz 1/4 11.0.1 11.0.1 5.8 GHz 5.4 GHz 5.4 GHz 4.9 GHz PMP 430 Series -

58430 PMP 430 Series -

54430 PMP 400 Series

- 54400 PMP 400 Series -

49400 Table 2 shows the Motorola PMP 430 Series (5.8 GHz OFDM) AP and SM models. Table 2: 5.8GHz OFDM - PMP 430 and PTP 230 Series Model Number Descriptions CSM 58430 Model Number 5.8GHz OFDM Subscriber Module (SM) Description Encryption Picture Power 29.5 VDC Supply Type Specs in Section 5790SM4 5.8 GHz OFDM SM 4 Mbps DES 5791SM4 5.8 GHz OFDM SM 4 Mbps AES 5790SM10 5.8 GHz OFDM SM 10 Mbps DES 5791SM10 5.8 GHz OFDM SM 10 Mbps AES 5790SM20 5.8 GHz OFDM SM 20 Mbps DES 5791SM20 5.8 GHz OFDM SM 20 Mbps AES 5790SM40 5.8 GHz OFDM SM Uncapped DES 5791SM40 5.8 GHz OFDM SM Uncapped AES 2.6.2 2.6.2 2.6.2 2.6.2 2.6.2 2.6.2 2.6.2 2.6.2 Refer to Table 7 for Models Issue 6.0 May 2011 Page 12 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement CAP 58430 Model Number 5.8GHz OFDM Access Point

(AP) Description Encryption Picture CMM Type Specs in Section 5780AP 5.8 GHz OFDM Connectorized AP w/antenna DES 5780APUS 5.8 GHz OFDM Connectorized AP w/antenna - US Model DES 5781AP 5.8 GHz OFDM Connectorized AP w/antenna AES 5781APUS 5.8 GHz OFDM Connectorized AP w/antenna - US Model AES 5780APC 5.8 GHz OFDM Connectorized AP No antenna DES 5781APC 5.8 GHz OFDM Connectorized AP - No antenna AES Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply 2.6.5 2.6.5 2.6.5 2.6.5 2.6.4 2.6.4 PTP 58230 Model Number 5.8GHz OFDM Backhaul (BH) Description Encryption Picture CMM Type 5780BH10 5.8 GHz OFDM BH 10 Mbps DES 5780BH20 5.8 GHz OFDM BH 20 Mbps DES 5780BH50 5.8 GHz OFDM BH Uncapped DES 5781BH10 5.8 GHz OFDM BH 10 Mbps AES 5781BH20 5.8 GHz OFDM BH 20 Mbps AES 5781BH50 5.8 GHz OFDM BH Uncapped AES Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Specs in Section 2.6.6 2.6.6 2.6.6 2.6.6 2.6.6 2.6.6 Issue 6.0 May 2011 Page 13 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 3 shows the Motorola PMP 430 Series (5.4 GHz OFDM) AP and SM models. Table 3: 5.4GHz OFDM - PMP 430 Series Model Number Descriptions CSM 54430 Model Number 5.4GHz OFDM Subscriber Module (SM) Description Encryption Picture Power 29.5 VDC Supply Type Specs in Section 5490SM4 5.4 GHz OFDM SM 4 Mbps DES 5491SM4 5.4 GHz OFDM SM 4 Mbps AES 5490SM10 5.4 GHz OFDM SM 10 Mbps DES 5491SM10 5.4 GHz OFDM SM 10 Mbps AES 5490SM20 5.4 GHz OFDM SM 20 Mbps DES 5491SM20 5.4 GHz OFDM SM 20 Mbps AES 5490SM40 5.4 GHz OFDM SM Uncapped DES 5491SM40 5.4 GHz OFDM SM Uncapped AES Refer to Table 7 for Models CAP 54430 Model Number 5.4GHz OFDM Access Point

(AP) Description Encryption Picture CMM Type 2.6.2 2.6.2 2.6.2 2.6.2 2.6.2 2.6.2 2.6.2 2.6.2 Specs in Section 5480AP 5.4 GHz OFDM Connectorized AP w/antenna DES 5480APUS*

5.4 GHz OFDM Connectorized AP w/antenna - US Model DES 5481AP 5.4 GHz OFDM Connectorized AP w/antenna AES 5481APUS*

5.4 GHz OFDM Connectorized AP w/antenna - US Model AES 5480APC 5.4 GHz OFDM Connectorized AP No antenna DES 5481APC 5.4 GHz OFDM Connectorized AP - No antenna AES Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply 2.6.5 2.6.5 2.6.5 2.6.5 2.6.4 2.6.4 Issue 6.0 May 2011 Page 14 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 4 shows the Motorola PMP 400 and PTP 200/230 Series (5.4 GHz OFDM) models available. Table 4: 5.4GHz OFDM - PMP 400 and PTP 200/230 Model Number Descriptions CSM 54400 Model Number 5.4 GHz OFDM Subscriber Module (SM) Description 5440SM 5.4 GHz OFDM SM 5441SM 5.4 GHz OFDM SM DES or AES DES AES 5440SMC 5.4 GHz OFDM Connectorized SM DES 5441SMC 5.4 GHz OFDM Connectorized SM AES CAP 54400 Model Number 5.4 GHz OFDM Access Point (AP) Description 5440AP 5.4 GHz OFDM Connectorized AP w/antenna 5440APUS 5.4 GHz OFDM Connectorized AP w/antenna - US Model 5441AP 5.4 GHz OFDM Connectorized AP w/antenna DES or AES DES DES AES 5441APUS 5.4 GHz OFDM Connectorized AP w/antenna - US Model AES 5440APC 5.4 GHz OFDM Connectorized AP No Antenna 5441APC PTP 54200 Model Number 5.4 GHz OFDM Connectorized AP No Antenna 5.4 GHz OFDM Backhaul (BH) Description 5440BH 5.4 GHz OFDM BH 5440BHUS 5.4 GHz OFDM BH US Model 5441BH 5.4 GHz OFDM BH 5441BHUS 5.4 GHz OFDM BH US Model DES AES DES or AES DES DES AES AES 5440BHC 5.4 GHz OFDM Connectorized BH DES 5440BHCUS 5.4 GHz OFDM Connectorized BH US Model DES 5441BHC 5.4 GHz OFDM Connectorized BH AES 5441BHCUS 5.4 GHz OFDM Connectorized BH US Model AES Picture Power 29.5 VDC Supply Type Specs in Section 2.6.3 2.6.3 2.6.4 Refer to Table 7 for Models 2.6.4 Picture CMM Type Specs in Section CMMmicro or CMM4 2.6.5 CMMmicro or CMM4 2.6.5 CMMmicro or CMM4 2.6.5 CMMmicro or CMM4 2.6.5 CMMmicro or CMM4 2.6.4 CMMmicro or CMM4 2.6.4 Picture CMM Type Specs in Section CMMmicro or CMM4 2.6.3 CMMmicro or CMM4 2.6.3 CMMmicro or CMM4 2.6.3 CMMmicro or CMM4 2.6.3 CMMmicro or CMM4 2.6.4 CMMmicro or CMM4 2.6.4 CMMmicro or CMM4 2.6.4 CMMmicro or CMM4 2.6.4 Issue 6.0 May 2011 Page 15 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement PTP 54230 Model Number 5.4 GHz OFDM Backhaul (BH) Description DES or AES Picture CMM Type Specs in Section 5480BH10 5.4 GHz OFDM BH 10 Mbps DES 5480BH20 5.4 GHz OFDM BH 20 Mbps DES 5480BH50 5.4 GHz OFDM BH Uncapped DES 5481BH10 5.4 GHz OFDM BH 10 Mbps AES 5481BH20 5.4 GHz OFDM BH 20 Mbps AES 5481BH50 5.4 GHz OFDM BH Uncapped AES Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires CMM4 w/56 VDC supply Requires 56 VDC supply 2.6.6 2.6.6 2.6.6 2.6.6 2.6.6 2.6.6 Table 5 shows the Motorola PMP 400 and PTP 200 Series (4.9 GHz OFDM) AP, SM and BH models. Table 5: 4.9GHz OFDM - PMP 400 and PTP 200 Model Number Descriptions CSM 49400 Model Number 4.9 GHz OFDM Subscriber Module (SM) Description Encryption Picture Power 56 VDC Supply Type Specs in Section 4940SM 4.9 GHz OFDM SM 4941SM 4.9 GHz OFDM SM 4940SMC 4.9 GHz OFDM Connectorized SM 4941SMC 4.9 GHz OFDM Connectorized SM DES AES DES AES 2.6.3 2.6.3 2.6.4 2.6.4 Refer to Table 7 for Models CAP 49400 Model Number 4.9 GHz OFDM Access Point

(AP) Module Description Encryption Picture Power 56 VDC CMM Type Specs in Section 4940AP 4.9 GHz OFDM Connectorized AP w/antenna DES Requires CMM4 w/56 VDC supply 2.6.5 4941AP 4.9 GHz OFDM Connectorized AP w/antenna AES Requires CMM4 w/56 VDC supply 2.6.5 Issue 6.0 May 2011 Page 16 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 4940APC 4.9 GHz OFDM Connectorized AP No antenna DES Requires CMM4 w/56 VDC supply 2.6.4 4941APC 4.9 GHz OFDM Connectorized AP No antenna AES Requires CMM4 w/56 VDC supply 2.6.4 PTP 49200 Model Number 4.9 GHz OFDM Backhaul (BH) Description Encryption Picture Power 56 VDC CMM Type Specs in Section 4940BH 4.9 GHz OFDM BH DES 4941BH 4.9 GHz OFDM BH AES 4940BHC 4.9 GHz OFDM Connectorized BH No antenna DES 4941BHC 4.9 GHz OFDM Connectorized BH No antenna AES Wall type 56VDC supply or CMM4 w/56 VDC supply Wall type 56VDC supply or CMM4 w/56 VDC supply Wall type 56VDC supply or CMM4 w/56 VDC supply Wall type 56VDC supply or CMM4 w/56 VDC supply 2.6.3 2.6.3 2.6.4 2.6.4 A Cluster Management Module (CMM4) provides GPS synchronization and power to the PMP 400/430 and PTP 200/230 series of products: Table 6 details the power requirements of the APs and BHs. Table 6: CMM4 56VDC and 30 VDC Operation Frequency PMP Series Access Point (AP) PTP 230 Series Backhaul (BH) Canopy Custom Power over Ethernet (PoE) 5.8 GHz 5.4 GHz 5.4 GHz PMP 430 Series CAP 58430/54430 PTP 230 Series PTP 58230/54230 56 VDC - Power on pins 5 &

8, return on pins 4 & 7 PMP 400 Series CAP 54400 PTP 200 Series PTP 54200 30 VDC - power on pins 7 and 8 and return on pins 4 and 5 4.9 GHz PMP 400 Series CAP 49400 PTP 200 Series PTP 49200 56 VDC - Power on pins 5 &

8, return on pins 4 & 7 The CMM4 can be configured with either or both a 56VDC and a 30VDC external power supply as shown in Figure 10 and Figure 11. The CMM4 must be used for 56 VDC operations which are required for the PMP 430 5.4 and 5.8-GHz AP, PMP 400 4.9-GHz AP, PTP 200 4.9-GHz BH, and PTP 230 5.4 and 5.8-GHz BH. The CMMmicro only supports 30 VDC operations. Issue 6.0 May 2011 Page 17 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 10: CMM4 56 VDC Power Supply Figure 11: CMMmicro and CMM4 30 VDC Power Supply Shown in Figure 12 is a CMM4 with labels for the various parts. When using both a 56 VDC and 30 VDC power supply, it is necessary to install a resistor in the 30 VDC terminal blocks. Refer to instructions included with the CMM4. For details on configuring the CMM4, refer to the CMM4 User Guide which is available from the Motorola support web site. http://motorola.wirelessbroadbandsupport.com/software/

Figure 12: CMM4 - 56 VDC and 30 VDC terminal blocks A Cluster Management Module (CMMmicro) provides GPS synchronization and 30 VDC power to the:

5.4-GHz PMP 400 Series - CAP 54400 uses 30 VDC 5.4-GHz PTP 200 Series - PTP 54200 uses 30 VDC A 600SSD surge suppressor provides over-voltage and over-current protection to APs, SMs, and BHs in various configurations. The diagram in Figure 13 illustrates the use of the 600SS surge suppressor with the PMP 400/430 AP and SM. Issue 6.0 May 2011 Page 18 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 13: 600SS Surge Suppression AP and SM diagram Issue 6.0 May 2011 Page 19 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 7 lists various ancillary equipment and model numbers. Table 7: Ancillary Equipment and Model Numbers Name Model or Part Number Typically use with C A P 5 x 4 3 0 C S M 5 x 4 3 0 C A P 5 4 4 0 0 P T P 5 x 2 3 0 C S M 5 4 4 0 0 P T P 5 4 2 0 0 C A P 4 9 4 0 0 C S M 4 9 4 0 0 P T P 4 9 2 0 0 Cluster Management Module micro

(CMMmicro 30 VDC power supply) Controller and 8-port embedded switch Outdoor enclosure for controller and switch (but not power supply) X X 30 VDC power supply included with two models (with 10 ft (3m) DC cable) 1070CK (with N. American AC cord for power supply) GPS antenna and mounting bracket 1070CK-02 (no AC cord) 1070CK-03 (no power supply) CMMmicro or CMM4 30 VDC power supply

(w 10 ft (3 m) DC cable) ACPS112WA (with N. American AC cord for power supply) PMP 400/430 5.8 & 5.4 GHz SM 29.5 VDC power supply

(also for isolated 5.4GHz AP or BH) Includes 6 ft (2m) DC cord No AC cord needed (plugs directly into AC receptacle) APCS112W-02A (no AC cord) ACPSSW-09B (US, UK, Euro clips) ACPSSW-13B (N. America) ACPSSW-10C (Argentina) ACPWWS-11C (China) ACPSSW-12A (Australia) X X X X Issue 6.0 May 2011 Page 20 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Name Model or Part Number Typically use with C A P 5 x 4 3 0 C S M 5 x 4 3 0 C A P 5 4 4 0 0 P T P 5 x 2 3 0 C S M 5 4 4 0 0 P T P 5 4 2 0 0 C A P 4 9 4 0 0 C S M 4 9 4 0 0 P T P 4 9 2 0 0 Cluster Management Module 4 (CMM4) Controller and 14-port EtherWAN switch

(old version had 9-port EtherWAN switch) Outdoor enclosure for controller and switch (but not power supply) No power supply GPS antenna and mounting bracket 1090CK X X X X X Cluster Management Module (CMM4) Controller ONLY Without EtherWAN switch Outdoor enclosure for controller

(but not power supply) GPS antenna and mounting bracket 56 VDC power supply for CMM4 Does not include DC cable or AC line cord Procure locally PMP 400 4.9GHz SM 56 VDC power supply

(also for standalone use with PMP 430 5.4 and 5.8 GHz AP, PMP 400 4.9 GHz AP or PTP 200 5.4 and 4.9 GHz BH) Includes 6 ft (2m) DC cord Requires country-specific AC cord Power supply is not included Order 56 VDC and/or 30 VDC power supply 1091 Power supply is not included Order 56 VDC and/or 30 VDC power supply X X SGPN4076 SGPN4063A Power cord is not included - Order country specific AC cord SGKN4427A (US/Canada/Mexico) SGKN4426A (Europe) SGKN4425A (Australia) X X X X X X X 4.9 GHz SM 56 VDC power supply AC cords SGKN4424A (China-Mainland)

(also for standalone use with PMP 430 5.4 and 5.8 GHz AP, PMP 400 4.9 GHz AP or PTP 200 5.4 and 4.9 GHz BH) SGKN4423A (Japan) SGKN4422A (Korea) SGKN4421A (United Kingdom/Singapore) SGKN4420A (India/Pakistan/South Africa) SGKN4419A (Argentina) X Issue 6.0 May 2011 Page 21 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Name Model or Part Number Typically use with C A P 5 x 4 3 0 C S M 5 x 4 3 0 P T P 5 x 2 3 0 C A P 5 4 4 0 0 C S M 5 4 4 0 0 P T P 5 4 2 0 0 C A P 4 9 4 0 0 C S M 4 9 4 0 0 P T P 4 9 2 0 0 Surge suppressor (AP, SM, BH) X X X X X X X X X 600SSD Surge suppressor pole-mount kit Refer to Figure 16 on page 25 SGHN5169A X X X X X X Radio mounting bracket X X X X X SMMB2A TECHNOLOGY AND BENEFITS 2.1 The radio automatically selects QPSK (Quadrature Phase Shift Keying), 16-QAM (Quadrature Amplitude Modulation), or 64-QAM based on RF environment to provide 1X, 2X, and 3X operation, respectively. This provides 3 speeds and a throughput of over 45 Mbps aggregate

(sum of up plus down when configured for 20MHz channel bandwidth) compared to FSK Canopy products with 2 speeds and a throughput of up to 14 Mbps. The OFDM radios feature lower receive sensitivity, FEC (Forward Error Correction), and higher antenna gain, all of which combine to provide longer range within regulatory-specified EIRP

(Equivalent Isotropic Radiated Power). Details on performance are listed in Table 8 on page 32. The PMP 400 and PTP 200 Series radios use an OFDM physical layer with 10 MHz channels and 256 sub-carriers while the PMP 430 Series radios use an OFDM physical layer with configurable channel bandwidth of 5, 10 or 20MHz. The PTP 230 Series radios use an OFDM physical layer with configurable channel bandwidth of 10 or 20 MHz. A PMP 400 Series 5.4-GHz radio with 10MHz channels will interoperate with a PMP 430 Series 5.4-GHz radio configured with 10MHz channel bandwidth and 1/4 cyclic prefix. However; due to the different carrier and modulation schemes between these OFDM radios and FSK Canopy radios, the two do not interoperate over the air. For example, a PMP 430/400 Series 5.4-GHz OFDM SM cannot connect to a 5.4-GHz FSK AP. 2.1.1 nLOS Benefits and Limitations In addition to providing LOS (Line-of-Sight) connectivity, use of OFDM technology can provide nLOS (near Line-of-Sight) connectivity and sometimes NLOS (Non-Line-of-Sight) connectivity:

LOS: the installer can see the AP from the SM and the first Fresnel zone is clear. Issue 6.0 May 2011 Page 22 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement nLOS: the installer can see the AP from the SM, but a portion of the first Fresnel zone is blocked. NLOS: the installer cannot see the AP from the SM and a portion or even much of the first Fresnel zone is blocked, but subsequent Fresnel zones are open. Figure 14 shows examples of LOS, nLOS, and NLOS links. Figure 14: LOS, nLOS, and NLOS Whereas multi-pathing degrades a link in some technologies (FSK, for example), OFDM can often use multi-pathing to an advantage to overcome nLOS, especially in cases where the Fresnel zone is only partially blocked by buildings, urban canyons, or foliage. OFDM tends to help especially when obstacles are near the middle of the link, and less so when the obstacles are very near the SM, AP, or BH. However, attenuation through walls and trees is substantial for any use of the 5.8 GHz, 5.4 GHz or 4.9 GHz frequency bands. Even with OFDM, these products should not be expected to penetrate walls or extensive trees and foliage. 2.2 APPLICATIONS Applications for the PMP 400/PTP 200 (5.4-GHz) and PMP 430/PTP 230 (5.4 & 5.8-GHz) Series include:

High throughput enterprise applications nLOS video surveillance in metro areas Extend networks into urban areas Extend networks into areas with foliage Applications for the PMP 49400 (4.9-GHz) and PTP 49200 Series systems include:

High throughput licensed network for government applications Municipal network - nLOS video surveillance in metro areas Disaster relief network Data service network - extend licensed networks into areas with foliage Issue 6.0 May 2011 Page 23 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement CONFIGURATION OPTIONS RF, IP, DFS 2.3 These systems use the Canopy Media Access Controller (MAC) layer. Settings like Downlink Data %, Range, and Control Slots are similar to Canopy FSK radios. An OFDM AP can communicate to over 200 SMs, similar to a Canopy FSK AP. The GUI (Graphical User Interface) is almost identical to Canopys FSK products, with a few additions to support OFDM-specific features. Network features like High Priority using DiffServ, MIR, CIR, NAT, DHCP and VLAN are available for the PMP 400/430 and PTP 200/230 Series OFDM radios, and are configured in the same way as they are for the PMP 100 Series and PTP 100 Series radios. In the 5.4 and 5.8-GHz band, DFS (Dynamic Frequency Selection) is provided for regulatory compliant operation, and is activated (if required per regulatory rules) using the Region Code feature. Two alternate frequencies can be configured to provide service in the unlikely case a module detects radar and triggers DFS, the same as standard Canopy. External Antenna Gain may need to be configured consistent with any antennas used, to avoid making the system overly sensitive to radar detection. Whitening, a technique used to avoid self-interference on Canopy FSK radios, is not offered as an option on the PMP 400/430 and PTP 200/230 Series radios, as whitening is not a technology applicable to an OFDM signal. POWER AND GROUNDING 2.4 PMP 430 Series APs and PTP 230 BHs use a nominal 56 VDC power system with power on pins 5 and 8 and return on pins 4 and 7. PMP 430 Series APs must use a CMM4 with a 56 VDC power supply. A CMMmicro will not power these units as it is providing the wrong voltage on the wrong pins. PMP 430 Series SMs use a 29.5 VDC wall mount power supply. PMP 54400 APs and SMs and PTP 54200 BHs use a nominal 30 VDC power system with power on pins 7 and 8 and return on pins 4 and 5. PMP 54400 APs and PTP 54200 BHs can be powered from either a CMMmicro with a 30 VDC power supply or a CMM4 with a 30 VDC power supply. A 29.5 VDC wall mount power supply is available for PMP 54400 SMs. PMP 49400 APs and SMs and PTP 49200 BHs use a nominal 56 VDC power system with power on pins 5 and 8 and return on pins 4 and 7. PMP 49400 APs and PTP 49200 BHs must use a CMM4 with a 56 VDC power supply. A CMMmicro will not power these units as it is providing the wrong voltage on the wrong pins. A 56 VDC power supply is available for PMP 49400 SMs. IMPORTANT!

When working on sites with both power systems, use care not to wrongly mix power supplies and radios as the two power systems use different pinouts as well as different voltages. On sites with a mix of 30 VDC and 56 VDC radios (up to the limit of 8 radios supported by one CMM4), a CMM4 connected to both a 30 VDC power supply and a 56 VDC power supply can be used. Due to the full metallic connection to the tower or support structure through the APs antenna or a connectorized BHs antenna, grounding the AP or BH and installing a 600SS surge suppressor within 3 ft (1 m) of the AP or BH (see Figure 13) is strongly recommended to suppress over voltages and over currents, such as those caused by near-miss lightning. APs and BHs provide a grounding lug, as shown in Figure 15, for grounding to the tower or support structure. Issue 6.0 May 2011 Page 24 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 15: AP Grounding Lug A pole mount kit (model no. SGHN5169A) is available for the 600SS. The pole mount kit, shown in Figure 16, provides a grounding point on one of its U-bolts that can be used for terminating ground straps from both the 600SS and the AP. Figure 16: 600SS pole mount kit 2.5 ADMINISTRATION SYSTEMS Motorola Prizm 3.3 or One Point Wireless Manager v3.0 SP 1 is recommended for managing PMP 400/430 and PTP 200 Series products with Release 11.0.1 and PTP 230 Series products with Release 10.7. Motorola Prizm 3.3 is available for download from the Motorola support web site:

http://motorola.wirelessbroadbandsupport.com/software/

Issue 6.0 May 2011 Page 25 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Motorola One Point Wireless Manager v3.0 SP 1 is available for download at:

http://motorola.wirelessbroadbandsupport.com/support/opws/software/

The Motorola Prizm 3.3 element management system is used to manage and monitor Canopy modules and to update module software. The One Point Wireless Manager v3.0 SP 1 is used to manage and monitor Canopy modules. However; the standalone CNUT tool must be used to upgrade radio software. CNUT 3.20.18 (Canopy Network Update Tool) is the stand-alone software update tool for PMP 400/430 and PTP 200/230 Series products for operators not using Prizm. CNUT is available at http://motorola.wirelessbroadbandsupport.com/software/. SPECIFICATIONS 2.6 PMP 430 (5.4 and 5.8-GHz) products are sold in the following formats:

SM - Radio with integrated antenna AP - Kitted, connectorized radio (antenna included) AP Connectorized radio (antenna provided by operator) PMP 400 (5.4 and 4.9-GHz) and PTP 200 (5.4 and 4.9-GHz) products are sold in the following formats:

SM/BH - Radio with integrated antenna AP/SM/BH - Connectorized radio (antenna provided by operator) AP - Kitted, connectorized radio (antenna included) PTP 230 (5.4 and 5.8-GHz) products are sold in the following format:

SM/BH - Radio with integrated antenna The following sections list specifications for each format. 2.6.1 Radio specifications (common to all formats) Radio Type Frequency Settable Transmit (Tx) Output Power Range by Channel Bandwidth 5 MHz 10 MHz 20 MHz PMP 430 AP and PTP 230 BH PMP 430 AP and PTP 230 BH PMP 400 AP and PTP 200 BH PMP 400 AP and PTP 200 BH 5.8 GHz

-30 to +21 dBm

-30 to +21 dBm

-30 to +21 dBm 5.4 GHz

-30 to +21 dBm

-30 to +21 dBm

-30 to +21 dBm 5.4 GHz N/A

-30 to +12 dBm N/A 4.9 GHz N/A

-30 to +18 dBm N/A Issue 6.0 May 2011 Page 26 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement SM 4.9, 5.4 and 5.8-

GHz SM Auto Transmit Power Control (TPC) with power set by the AP to provide power leveling for close-in SMs PMP 430 AP/SM: configurable channel bandwidth: 5, 10 or 20MHz PMP 430 AP/SM: configurable cyclic prefix (1/4, 1/8 or 1/16) PMP 430 AP: Max range 1-30 miles for 5 and 10MHz channel bandwidth, 1-24 miles for 20MHz channel bandwidth PMP 400 AP: Max range 1-30 miles PMP 400 AP/SM and PTP 200 BH: channel bandwidth fixed at 10MHz PMP 400 AP/SM: cyclic prefix fixed at 1/4 PTP 200 BH: configurable cyclic prefix (1/4 or 1/8) PTP 230 BH: configurable channel bandwidth: 10 or 20MHz PTP 230 BH: configurable cyclic prefix (1/4, 1/8 or 1/16) PTP 230 BH: Max range 1-30 miles for 10MHz channel bandwidth, 1-24 miles for 20MHz channel bandwidth Under 22 W DC power Environment range of -40C to +55C (-40F to +131F); 0 to 95% relative humidity, non-

condensing PMP 400/430 and PTP 200/230 products are available with either DES or AES encryption 2.6.2 Specifications for PMP 430 (5.4 & 5.8-GHz) SM and PTP 230 (5.4 & 5.8-GHz) BH radio with integrated antenna Radio with an integrated, internal vertically polarized antenna 1 lb, 11.75 x 3.4 x 3.4 in (hwd) or ~.45 kg, 29.9 x 8.6 x 8.6 cm (hwd) PMP 430 Configurable channel bandwidth: 5, 10 or 20MHz PTP 230 Configurable channel bandwidth: 10 or 20MHz Configurable cyclic prefix: 1/4, 1/8 or 1/16 10 dBi patch antenna - 55 x 55 and 3 dB beam width Optional LENS mounts directly to SM or BH No additional mounting hardware required o adds 6 dBi to 10 dB internal patch antenna which can increase range o narrows beam width by 3x (from 55 to 18) which can reduce interference caused by multi-path reflections o LENS part number: AN500A Optional Reflector dish o adds 15 dBi to 10 dB internal patch antenna which can increase range o narrows beam width (from 55 to 6) which can reduce interference caused by multi-path reflections Issue 6.0 May 2011 Page 27 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 17: PMP 430 SM Figure 18: PMP 430 SM with Optional LENS 2.6.3 Specifications for PMP 400 (4.9 & 5.4-GHz) AP/SM and PTP 200 (4.9 & 5.4-

GHz) BH radio with integrated antenna Radio with an integrated, internal vertically polarized antenna 10MHz channel bandwidth 1/4 Cyclic Prefix 15.5 elevation x 17.5 azimuth -- 3 dB beam 17 dBi gain for antenna at 5.4 GHz. 17 dBi antenna gain plus 10 dBm transmit power gives the regulatory maximum of 27 dBm EIRP. 17 dBi gain for antenna at 4.9 GHz. 17 dBi antenna gain plus 18 dBm transmit power gives 35 dBm EIRP. 2.8 lb, 13.25 x 8.25 x 4.38 in (hwd) or ~1.3 kg, 33.7 x 21 x 11.13 cm (hwd) Issue 6.0 May 2011 Page 28 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 19: PMP 400 and PTP 200 radio with integrated antenna 2.6.4 Specification for PMP 400/430 AP and PTP 200 BH connectorized radio Connectorized radio only with N-type connector (antenna to be provided by operator) 2.8 lb, 13.25 x 8.25 x 4.38 in (hwd) or ~1.3 kg, 33.7 x 21 x 11.13 cm (hwd) Figure 20: PMP 400/430 and PTP 200 BH connectorized radio 2.6.5 Specifications for PMP 400/430 kitted, connectorized radio (antenna included) Connectorized radio (N-type connector) and connectorized antenna kitted together Antenna optimized for system coverage vs. system self-interference for 90 sectors (3 dB beam pattern of 60 azimuth by 5 elevation, with near-in null fill) 5.8 GHz - 18 dBi gain for antenna. 18 dBi antenna gain minus 1 dB cable loss plus:

19 dBm tx power gives the U.S. regulatory max 36 dBm EIRP (5, 10 or 20 MHz Channel) 13 dBm tx power gives the Europe regulatory max 30 dBm EIRP. (5MHz Channel) 16 dBm tx power gives the Europe regulatory max 33 dBm EIRP. (10MHz Channel) 19 dBm tx power gives the Europe regulatory max 36 dBm EIRP. (20MHz Channel) 5.4 GHz - 18 dBi gain for antenna. 18 dBi antenna gain minus 1 dB cable loss plus:

7 dBm tx power gives the U.S./Europe regulatory max 24 dBm EIRP. (5MHz Channel) Issue 6.0 May 2011 Page 29 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 10 dBm tx power gives the U.S./Europe regulatory max 27 dBm EIRP. (10MHz Channel) 13 dBm tx power gives the U.S./Europe regulatory max 30 dBm EIRP. (20MHz Channel) 4.9 GHz - 17 dBi gain for antenna. 17 dBi antenna gain plus 18 dBm tx power gives 35 dBm EIRP. 13 lb, 28 x 8.25 x 11 in (hwd) or ~6 kg, 71 x 21 x 28 cm (hwd) Figure 21: CAP 49400 Figure 22: CAP 58430 and 54430 Issue 6.0 May 2011 Page 30 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement PERFORMANCE 2.7 Table 8 shows performance details for PMP 400/430 and PTP 200/230 series. Round trip latency is 5-7 msec for all platforms. Issue 6.0 May 2011 Page 31 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 8: Performance Details Product Parameter Performance Details 1X 2X 3X PMP 58430 Modulation QPSK 16 QAM 64 QAM 5.8 GHz OFDM and PMP 54430 5.4-GHz OFDM 5.8-GHz Max. LOS Range with Integrated SM antenna 6.4 miles /

10.24 km 5 miles /

8 km 2.3 miles /

3.68 km with LENS that adds 6 dB to SM Range 13 miles /

20.8 km 10 miles /

16 km 4.5 miles /

7.2 km with Reflector Dish that adds 15 dB to SM Range 30 miles /

48 km 29 miles /

46.4 km 13 miles /

20.8 km 5.4-GHz Max. LOS Range with Integrated SM antenna 3.4 miles /

5.44 km 2.7 miles /

4.32 km 1.2 miles /

1.92 km with LENS that adds 6 dB to SM Range 6.8 miles /

10.88 km 5.4 miles /

8.64 km 2.4 miles /

3.84 km with Reflector Dish that adds 15 dB to SM Range 7.6 miles /

12.16 km 6 miles /

9.6 km 2.7 miles /

4.32 km 5MHz Channel: (up+down) 3.5 Mbps 7 Mbps 10.5 Mbps 10 MHz Channel: (up+down) 7.5 Mbps 15 Mbps 22.5 Mbps 20 MHz Channel: (up+down) 16.5 Mbps 32 Mbps 45+ Mbps 5MHz Channel

-93 dBm

-86 dBm

-79 dBm 10MHz Channel

-90 dBm

-83 dBm

-76 dBm 20MHz Channel

-87 dBm

-80 dBm

-73 dBm 5.4 and 5.8-GHz Max. Aggregate Throughput with 1/16 Cyclic Prefix 5.4 and 5.8-GHz Nominal Receive Sensitivity

(including FEC) PTP 58230 Modulation QPSK 16 QAM 64 QAM 5.8 GHz OFDM and PTP 54230 5.4-GHz OFDM 5.8-GHz Max. LOS Range with Integrated BH antenna 6.4 miles /

10.24 km 5 miles /

8 km 2.3 miles /

3.68 km with LENS that adds 6 dB to BHRange 13 miles /

20.8 km 10 miles /

16 km 4.5 miles /

7.2 km with Reflector Dish that adds 15 dB to BH Range 30 miles /

48 km 29 miles /

46.4 km 13 miles /

20.8 km 5.4-GHz Max. LOS Range with Integrated BH antenna 3.4 miles /

5.44 km 2.7 miles /

4.32 km 1.2 miles /

1.92 km with LENS that adds 6 dB to BH Range 6.8 miles /

10.88 km 5.4 miles /

8.64 km 2.4 miles /

3.84 km with Reflector Dish that adds 15 dB to BH Range 7.6 miles /

12.16 km 6 miles /

9.6 km 2.7 miles /

4.32 km 10 MHz Channel: (up+down) 7.5 Mbps 15 Mbps 23 Mbps 20 MHz Channel: (up+down) 17 Mbps 34 Mbps 50 Mbps 10MHz Channel

-90 dBm

-83 dBm

-76 dBm 20MHz Channel

-87 dBm

-80 dBm

-73 dBm 5.4 and 5.8-GHz Max. Aggregate Throughput with 1/16 Cyclic Prefix 5.4 and 5.8-GHz Nominal Receive Sensitivity

(including FEC) Issue 6.0 May 2011 Page 32 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement PMP 54400 Modulation QPSK 16 QAM 64 QAM PTP 54200 5.4 GHz OFDM Maximum LOS Range with integrated SM antenna Note: LENS and Reflector cannot be used. 5 miles /

8 km 3.4 miles /

5.5 km 1.4 miles/

2.25 km 10 MHz Channel: (up+down) Max. Aggregate Throughput with 1/4 cyclic prefix 7.5 Mbps 14 Mbps PMP: 20.3 Mbps PTP: 21 Mbps Nominal Receive Sensitivity (including FEC)

-89 dBm

-78 dBm

-70 dBm PMP 49400 Modulation QPSK 16 QAM 64 QAM PTP 49200 4.9 GHz OFDM Maximum LOS Range with integrated SM antenna Note: LENS and Reflector cannot be used. 10 miles /

16 km 4 miles /

6.4 km 1.4 miles /

2.25 km 10 MHz Channel: (up+down) Max. Aggregate Throughput with 1/4 cyclic prefix 7.5 Mbps 14 Mbps 20.3 Mbps Nominal Receive Sensitivity (including FEC)

-89 dBm

-78 dBm

-70 dBm Issue 6.0 May 2011 Page 33 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 3 Planning PMP 400 and PTP 200 Series systems use 10 MHz channel bandwidth configurable on 5 MHz channel centers while the PMP 430 Series is configurable with a 5, 10 or 20 MHz channel bandwidth and the PTP 230 Series is configurable with a 10 or 20 MHz channel bandwidth. When a PMP 430 is configured with 5 MHz channel bandwidth, the radio is configurable on 2.5 MHz center channels and is configurable on 5 MHz center channels when it is configured for either 10 or 20 MHz channel bandwidth. This channel size, along with some different characteristics due to the use OFDM carrier technology and QPSK, 16 QAM, or 64 QAM modulations, supports somewhat different channel planning than for standard Canopy. (For reference, PMP 100 Series uses 20 MHz channels configurable on 5 MHz centers, single carrier technology, and 2-level and 4-level FSK modulation.) TOWER CHANNEL PLANNING 3.1 For a single cluster of 4 APs on a tower, 2-channel re-use with channels on 10 MHz channel center spacing gives good performance. In channel design parlance, this can be stated as ABAB channel planning, with no guard band needed between A and B. A typical arrangement might be to use radios configured for 5480 MHz aimed north and south, and radios configured for 5490 MHz aimed east and west. Available 5.8 GHz channel center frequencies for each region are shown in Table 9. These vary by region due to different band edge RF specifications (for example, between Canada/US and Europe). Table 9: 5.8 GHz Channel Center Frequencies, by Region Channel Bandwidth Region(s) Range of Center Frequencies Available (MHz) Center Channel Spacing

# of

# of non-

center overlapping channels channels United States, Canada, Australia, Brazil and Russia 5727.5 5845 2.5MHz 48 24 Europe and Other 5727.5 5872.5 2.5MHz India 5827.5 5872.5 2.5MHz United States, Canada, Australia, Brazil and Russia 5730 5845 5MHz 5MHz 10MHz 20MHz Europe and Other 5730 5870 India United States, Canada, Australia, Brazil and Russia 5830 5870 5735 5840 Europe and Other 5735 5865 India 5835 5865 20MHz FSK

(for comparison) United States, Canada, Europe and Australia 5735 5840 59 19 24 29 9 22 27 7 22 30 10 12 15 5 6 7 2 6 5MHz 5MHz 5MHz 5MHz 5MHz 5MHz Issue 6.0 May 2011 Page 34 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement

(For reference, standard Canopy uses 2-channel re-use with clusters of 6 APs on a tower with channel center spacing of either 25 MHz for Advantage APs or 20 MHz for non-Advantage APs. This is ABCABC channel planning, with 5 MHz guard band between the 20 MHz channels for Advantage APs and no guard band needed for non-Advantage.) Available 5.4 GHz channel center frequencies for each region are shown in Table 10. These vary by region due to different band edge RF specifications (for example, between Canada/US and Europe) requirements in US, Canada, Europe and Australia to not impinge on the frequencies between 5600 and 5650 MHz, which are frequencies on which some weather radar operate Table 10: 5.4 GHz Channel Center Frequencies, by Region Channel Bandwidth Region(s) Range of Center Frequencies Available (MHz) Center Channel Spacing

# of

# of non-

center overlapping channels channels 5MHz United States, Canada and Australia Europe Brazil, India, Russia and Other United States, Canada and Australia 5475 5597.5 and 5652.5 5715 2.5MHz 76 38 5472.5 5597.5 and 5652.5 5717.5 2.5MHz 78 5475 5715 2.5MHz 97 40 49 5480 5595 and 5655 5710 5MHz 36 18 10MHz Europe 5475 5595 and 5655 5715 5MHz 38 Brazil, India, Russia and Other United States, Canada and Australia 5480 5710 5MHz 47 5475 5590 and 5660 5705 5MHz 34 36 20MHz Europe 5470 5590 and 5660 5710 5MHz 20 24 9 9 Brazil, India, Russia and Other United States, Canada, Europe and Australia 5475 5705 5495 5585 and 5665 5705 20MHz FSK

(for comparison) 5MHz 47 12 5MHz 28 8 Available 4.9 GHz channel center frequencies are shown in Table 11. Issue 6.0 May 2011 Page 35 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 11: 4.9 GHz Channel Center Frequencies Range of Center Frequencies Available (MHz)

(on 5 MHz centers within this range, inclusive) Number of center channels Maximum number of non-overlapping channels 4945 - 4985 9 5 The best practice for channel planning for APs is to conduct extensive site RF surveys before choosing channels. The SM provides a basic Spectrum Analyzer that can be used for site surveys. For more sophisticated analysis, consider consulting an experienced RF engineer and using a full-featured spectrum analyzer. 3.2 DOWN TILT The standard AP antenna produces a 3 db beam elevation (up and down) of 5, with near-in null fill that allows good coverage of close-in SMs that otherwise would be affected by the narrow pattern. This is a narrower pattern than operators may be used to with standard Canopys 60 3 dB beam, and may require down tilt on the antenna. The bracket of the standard antenna has provision for measured down tilt. The recommended practice is to use one of the many radio analysis and mapping tools or on-line tools to calculate down tilt based on antenna height above the service area. 3.3 WEATHER RADAR Spectrum between 5600 and 5650 MHz (sometimes called the weather notch) is used by some weather radar and is not allowed for use by regulations in some regions, including US, Canada and, for new equipment, Europe. When the Canopy module is set to either of those regions

(configured on the Configuration => General page of the module), it will not allow configuration of the appropriate frequencies, as shown in Table 10. Even in regions where use of the spectrum between 5600 and 5650 MHz is allowed, the best practice is to not use these channels if there are any other usable channels available. Only use the channels in this weather notch after monitoring the spectrum for a week or more using a spectrum analyzer to ascertain the spectrum is clear and there is no weather radar in the area that will cause interference to your Canopy system. RANGE AND THROUGHPUT PLANNING 3.4 PMP 430 and PTP 230 5.4 and 5.8-GHz series modules provide 45+ Mbps aggregate throughput at distances of 1.2 miles (1.92 km) and 2.3 miles (3.68 km) respectively. PMP 400 and PTP 200 Series modules provide up to 21 Mbps aggregate throughput at distances of 1.4 miles (2.25 km) in RF environments with clear line-of-sight and low background interference levels. Additional performance details are shown in Table 8 on page 32. RF environments with occluded Fresnel zones or higher background interference levels may give lower, but still very good, performance, depending on the specifics of the environment. Similar to standard Canopy, at any given instant, any radios operating at 1X or 2X take more air time to transmit a given amount of data than if they were running at 3X. Similar to standard Canopy, PMP 400/430 and PTP 200/230 Series modules may see reduced total throughput when handling traffic with a high percentage of small packets. The effect of this, again similar to standard Canopy, is that at any given instant total throughput depends on Mix of links running at 3X, 2X, and 1X Mix of packet sizes Issue 6.0 May 2011 Page 36 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 3.5 SPECTRUM ANALYZER A spectrum analyzer is available on the SMs Tools => Spectrum Analyzer page. The spectrum analyzer is also available on an AP by temporarily converting it to an SM by setting the Device Type to SM on the APs Configuration => General page. The spectrum analyzer works like the spectrum analyzer in classic FSK SMs. Spectrum analyzer uses include:

Showing relative power levels (instantaneous and average) across the band, to aid in selecting channels and performing RF planning. Troubleshooting to finding the frequency, relative power level, and location of interferers by rotating a single SM, or triangulating from multiple SMs in a geographical area. Release 10.2 added a configurable setting on the Tools => Spectrum Analyzer web page to display either instantaneous or averaging for spectrum analyzer results for the PTP 100 BHs and PMP 430 5.8-GHz Series. Release 10.3 added this enhancement for the PMP 400/430 5.4-GHz, PTP 200 BHs and PMP 100 Series. The PMP 430 and PTP 230 Series uses average detector rather than peak detector algorithm which results in ~10 dBm lower readings than PMP 400 Series and FSK which use peak detectors. For example, when measuring power from an OFDM AP transmitting on a given channel the PMP 430 5.8-GHz OFDM SM might show a Receive Power Level of -60 dBm while a PMP 100 5.7-GHz FSK SM spectrum analyzer shows a power level of -53 for that channel. Figure 23: PMP 430 spectrum analysis compared to FSK In addition, an PMP 430 SM measures power across 5, 10 or 20-MHz channels (PTP 230 measures power across 10 or 20-MHz channels) while an FSK SM measures power across 20-

MHz channels, so power measurements are not directly comparable between the two. For both FSK and OFDM, the receivers channel bandwidth has been added to the display. This is important to note as the width of the OFDM channel (5, 10 or 20MHz) affects the bandwidth data of the spectrum analyzer sample. Issue 6.0 May 2011 Page 37 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement The built-in spectrum analyzer can be very useful as a tool for troubleshooting and RF planning, but doesnt duplicate the accuracy and programmability of a dedicated, high-end spectrum analyzer, which may be needed in some cases. COLLOCATION OF 5.8 GHZ OFDM WITH STANDARD 5.7 GHZ 3.6 CANOPY FSK When locating 5.8 GHz PMP 430 OFDM APs near 5.7 GHz standard Canopy FSK APs

(especially on the same tower, but also in the same geographical area), the following practices should be followed to avoid interference between the two systems:

Plan spacing between OFDM and FSK channels to provide 25 MHz center spacing, which gives a 10 MHz guard band between the 10 MHz OFDM channel and the 20 MHz FSK channel. Coordinate Downlink Data %, Range, and Control Slot settings using both the OFDM and the FSK frame calculators The following paragraphs give more details on these recommended practices. 3.6.1 Channel Spacing Center spacing of 25 MHz between collocated FSK and OFDM APs provides a 10 MHz guard band between the 20 MHz and 10 MHz channels, which has proven useful and needed in field testing. Alternatively, in cases where channel planning is severely restricted and the 10 MHz guard band (25 MHz spacing) is not possible, using vertical separation of 5 feet or more between the OFDM and FSK APs may allow collocation with no guard band (15 MHz spacing) in some deployments. 3.6.2 Frame Calculations and Configuration Settings Interference between collocated Canopy systems can be avoided by following two practices:

1. Use a CMM with GPS synchronization. This synchronizes frame start, so that all collocated APs begin transmitting at the same time each 2.5 millisecond frame. 2. Use the frame calculators in each module, OFDM and FSK (the frame calculators are different, as frame details are different) to select Downlink Data %, Range, and Control Slots for each system that produce Rec SEQ Start values that are within 300 bit times. This ensures that all collocated APs end transmission each frame before any collocated AP begins to receive. When collocating only Canopy OFDM APs together, or collocating only Canopy hardware-

scheduled FSK APs together, the simple practice of setting the Downlink Data %, Range, and Control Slots the same on all APs ensures they wont interfere with each other. (These parameters are set on the Configuration => Radio page of the AP.) However, due to the different physical layer between Canopy OFDM and Canopy FSK, this doesnt necessarily work when collocating OFDM and FSK together. You will need to use frame calculators on both the OFDM and FSK modules, as they are different frame calculators. For the same Downlink Data %, Range, and Control Slots, the frame calculators give different results. Use of the frame calculators is similar to the previous use when collocating PMP 100 FSK software-scheduled and hardware-scheduled APs. Issue 6.0 May 2011 Page 38 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement COLLOCATION OF 5.4 GHZ OFDM WITH STANDARD 5.4 GHZ 3.7 CANOPY FSK When locating 5.4 GHz PMP 400/430 and PTP 200/230 Series OFDM APs near 5.4 GHz standard Canopy FSK APs (especially on the same tower, but also in the same geographical area), the following practices should be followed to avoid interference between the two systems:

Plan spacing between OFDM and FSK channels to provide 25 MHz center spacing, which gives a 10 MHz guard band between the 10 MHz OFDM channel and the 20 MHz FSK channel. Coordinate Downlink Data %, Range, and Control Slot settings using both the OFDM and the FSK frame calculators The following paragraphs give more details on these recommended practices. 3.7.1 Channel Spacing Center spacing of 25 MHz between collocated FSK and OFDM APs provides a 10 MHz guard band between the 20 MHz and 10 MHz channels, which has proven useful and needed in field testing. Alternatively, in cases where channel planning is severely restricted and the 10 MHz guard band (25 MHz spacing) is not possible, using vertical separation of 5 feet or more between the OFDM and FSK APs may allow collocation with no guard band (15 MHz spacing) in some deployments. 3.7.2 Frame Calculations and Configuration Settings Interference between collocated Canopy systems can be avoided by following two practices:

3. Use a CMM with GPS synchronization. This synchronizes frame start, so that all collocated APs begin transmitting at the same time each 2.5 millisecond frame. 4. Use the frame calculators in each module, OFDM and FSK (the frame calculators are different, as frame details are different) to select Downlink Data %, Range, and Control Slots for each system that produce Rec SEQ Start values that are within 300 bit times. This ensures that all collocated APs end transmission each frame before any collocated AP begins to receive. When collocating only Canopy OFDM APs together, or collocating only Canopy hardware-

scheduled FSK APs together, the simple practice of setting the Downlink Data %, Range, and Control Slots the same on all APs ensures they wont interfere with each other. (These parameters are set on the Configuration => Radio page of the AP.) However, due to the different physical layer between Canopy OFDM and Canopy FSK, this doesnt necessarily work when collocating OFDM and FSK together. You will need to use frame calculators on both the OFDM and FSK modules, as they are different frame calculators. For the same Downlink Data %, Range, and Control Slots, the frame calculators give different results. Use of the frame calculators is similar to the previous use when collocating PMP 100 FSK software-scheduled and hardware-scheduled APs. Issue 6.0 May 2011 Page 39 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Procedure 1: Finding collocation values using Frame Calculators Using the Tools => Frame Calculator on an OFDM module, enter the desired Downlink Data %, Range, and Control Slot settings, click Calculate, and observe the Rec SEQ Start value. Using the Tools => Frame Calculator on an FSK module, enter the desired Downlink Data %, Range, and Control Slot settings, click Calculate, and observe the Rec SEQ Start value. Iterate, usually adjusting the FSK Downlink Data % and the OFDM Downlink Data %

values by a few percent each time, until the Rec SEQ Start times of all collocated modules are within 300 bit times of each other. Configure the OFDM modules using the resulting OFDM values, and the FSK modules using the resulting FSK values. The frame calculator page (FSK and OFDM) has been simplified with Release 10.3 to show only information pertinent to co-location. It will now display AP TX end time and AP RX start time which allows the operator to more easily calculate co-location duty cycles. Issue 6.0 May 2011 Page 40 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 4 Configuring Most PMP 400/430 Series and PTP 200/230 Series configuration items are identical or very similar to configuration items in standard FSK Canopy modules. This section discusses those that are new or changed and also remarks on some that remain unchanged. LINK OPERATION 1X/2X/3X 4.1 PMP 400/430 and PTP 200/230 Series products offer three levels or speeds of operation 1X, 2X, and 3X. If received power is less due to distance between the AP/BHM and the SM/BHS or due to obstructions, or interference affects the RF environment, the Canopy system will automatically and dynamically adjust links to the best operation level. Distance, rates and other information associated with the operation levels are shown in Table 8 on page 32. The system chooses its operation rate dynamically, based on Canopys internal ARQ (Automatic Repeat reQuest) error control method. With ARQ, every data slot of every frame sent over the air

(except downlink broadcast) is expected to be acknowledged by the receiver, and if acknowledgement is not received, the data is resent. The sending unit monitors these resends, and adjusts the operation rate accordingly. A normal system may have links that move from 3X to 2X (or 1X) and back as the RF environment changes. Furthermore, the links operate independently; normal operation can have a downlink running at 3X while the uplink RF environment only supports 2X. The default is for both AP/BHM and SM/BHS to be enabled for 3X operation. An operator may lock down a link to 1X/2X operation or to only 1X operation using the Dynamic Rate Adapt parameter on the SMs/BHSs Configuration => General page as shown in Figure 24. This parameter locks down the uplink or downlink operation. An operator may lock down an entire sector to 2X and 1X operation, or to only 1 X operation, using the Dynamic Rate Adapt parameter on the APs Configuration => General page. This parameter locks down uplink or downlink of all links in the sector, and overrides any SM 1X/2X/3X settings. For example, if an individual link is set for 3X operation at the SM and the sector is set for 1X operation at the AP, all links in the sector will be locked down to 1X operation. Figure 24: Dynamic Rate Adapt on AP "Configuration => General" page In most cases an operator is well-served to leave the setting at 1X/2X/3X and let the system automatically and dynamically choose the best rate for each link. Cases when it may be useful to lock down a link to 1X or 2X include:

If you are having trouble aiming a link or getting it to register, locking the link down to 2X or 1X may help in some cases. If the link is suspected to be oscillating between operation rates to the detriment of throughput, locking the link down may increase throughput. Usually, even if the link is moving rapidly between operation rates, overall link throughput and sector capacity are highest if the link is left at 3X and the link can choose its own rate dynamically. General link troubleshooting Optimal sector utilization involves having as many links as possible running at 3X. This provides as much capacity as possible for the sector. As an example, you want to limit throughput to an individual subscriber to 1X rates. This does not mean you should set that link to 1X operation. Issue 6.0 May 2011 Page 41 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Use MIR (Maximum Information Rate) settings to cap the SMs bandwidth use, but let the link run at as high an operation rate as the RF environment will allow. This ensures that any transmission uses as little air time as possible, leaving more air time for other SMs. TRANSMITTER OUTPUT POWER (AND NO JITTER) 4.2 The AP/BHMs Transmitter Output Power is configured on the AP/BHMs Configuration =>

Radio page. Table 12: PMP 400/430 and PTP 200/230 Tx output power Radio/

Frequency Channel Size Region(s) Transmit Output Power Range TX Default Setting Antenna Gain

(18 dBi 1dB cable loss) Max EIRP

(Tx +

Antenna Gain) 5 MHz 10 MHz 20 MHz 5 MHz 10 MHz 20 MHz 10 MHz United States and Canada

-30 to +19 dBm 19 dBm 17 dBm 36 dBm Europe and India

-30 to +13 dBm 13 dBm 17 dBm 30 dBm United States and Canada

-30 to +19 dBm 19 dBm 17 dBm 36 dBm Europe and India

-30 to +16 dBm 16 dBm 17 dBm 33 dBm United States, Canada, Europe and India United States, Canada, Europe, India, Russia, Brazil and Australia

-30 to +19 dBm 19 dBm 17 dBm 36 dBm

-30 to +7 dBm 7 dBm 17 dBm 24 dBm

-30 to +10 dBm 10 dBm 17 dBm 27 dBm

-30 to +13 dBm 13 dBm 17 dBm 30 dBm United States and Canada

-30 to +19 dBm 19 dBm 17 dBm 36 dBm Europe and India

-30 to +16 dBm 16 dBm 17 dBm 33 dBm 20 MHz United States, Canada, Europe and India 10 MHz 20 MHz 10 MHz United States, Canada, Europe, India, Russia, Brazil and Australia United States, Canada, Europe, India, Russia, Brazil and Australia 10 MHz United States, Canada, Europe, India, Russia, Brazil and Australia

-30 to +19 dBm 19 dBm 17 dBm 36 dBm

-30 to +7 dBm 7 dBm 17 dBm 24 dBm

-30 to +10 dBm 10 dBm 17 dBm 27 dBm

-30 to +13 dBm 13 dBm 17 dBm 30 dBm

-30 to +12 dBm 10 dBm 17 dBm 27 dBm

-30 to +18 dBm 18 dBm 17 dBm 35 dBm PMP 430 5.8 GHz OFDM PMP 430 5.4 GHz OFDM PTP 230 5.8 GHz OFDM PTP 230 5.4 GHz OFDM PMP 400 PTP 200 5.4 GHz OFDM PMP 400 PTP 200 4.9 GHz OFDM For the PMP 400 5.4-GHz OFDM to meet 27 dBm EIRP with the connectorized 18 dBi antenna

(with 1 dB of cable loss) that comes with the 5440AP or 5441AP, or the integrated 17 dBi antenna that comes with a 5440BH or 5441BH, the maximum setting allowed is 10 dBm (the default) since 27-17=10. Issue 6.0 May 2011 Page 42 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement If a connectorized AP or BHM has been purchased and the operator has provided the antenna, the Transmitter Output Power must be configured based on that antenna and consistent with local or regional regulations. For example, if a 5440APC is being used with a 15 dBi antenna, then the maximum setting allowed to meet 27 dBm EIRP is the full 12 dBm of which the radio is capable. IMPORTANT!

It is the responsibility of the operator and professional installer to ensure Transmitter Output Power is set within regulatory limits for their country or region. These must be set or confirmed on initial configuration and after a module is reset to factory defaults, and should be confirmed after the software on a module is upgraded. In most cases the operator will want to set the APs Transmitter Output Power to the maximum allowed so as to have the greatest overall range and the greatest range for 3X operation. It may be useful to reduce Transmitter Output Power when Canopy systems are located close together, with good coverage given because of their proximity and full power isnt needed, or in cases where an operator is trying to reduce interference from the Canopy system to other systems. Each SMs Transmitter Output Power is automatically set by the AP. The AP monitors the received power from each SM, and adjusts each SMs Transmitter Output Power so that the received power at the AP from that SM is not greater than -60 dBm. In addition, for 5.4-GHz SMs, the AP sets the SMs Transmitter output power so the SMs EIRP will be within regulatory requirements. PMP 400/430 Series networks use Auto-TPC because OFDM technology is more sensitive to large differences in power levels from SMs operating at various distances from the AP than the single carrier technology used in Canopy FSK. PTP 200 Series bridges do not use Auto-TPC the operator sets Transmitter Output Power on the Configuration => Radio page of both the BHM and the BHS. PMP 400/430 and PTP 200/230 Series modules display the typical Canopy Receive Power Level as shown in Figure 25. Due to the different modulation technique no jitter is calculated or displayed. Issue 6.0 May 2011 Page 43 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 25: SM Power Level on AP Home => Session Status page. 4.3 DOWNLINK DATA %, RANGE, AND CONTROL SLOTS The Downlink Data parameter on the APs and BHMs Configuration => General page can be set in 1% increments between 10% and 90%. The default as shown in Figure 26 is 75%. In order for U.S. model 5.4 GHz PTP Series radios to meet FCC DFS compliance, the Downlink Data has been limited to 10-65% at the Backhaul Master. For all other regions of 5.4 GHz PTP 230 Series radios and all regions of 5.8 GHz PTP radios, the Downlink Data range remains 10-

90%. The Range parameter on the APs Configuration => General page can be set in 1-mile increments between 1 and 30 miles for PMP 430 5 and 10MHz channel bandwidth and between 1 and 24 miles for PMP 430 20MHz channel bandwidth. The default as shown in Figure 26 is 2 miles. Set the Range to the distance of the furthest SM from any AP in the area. The Range parameter effectively determines frame structure of the Canopy over-the-air protocol, especially turn-around guard time. Setting Range the same across a geographical area give best overall performance. Range does not change transmit power levels. Do not set a higher Range than needed. A higher Range gives no higher power and slightly reduces throughput to allow for higher air delay and turn-around time. If the Range is set to greater than 5 miles, the SM limits the Downlink Data to a maximum of 85% to avoid close-in SMs having registration issues. For example, a Range of 6 miles and a Downlink Data of 90% is not allowed. Operationally, if the Downlink Data % is set to greater than 85% and the user enters a range greater than 5 miles, the module will reset the Downlink Data % to 85%

if the range is set to greater than 5 miles and the user enters a Downlink Data % of greater than 85%, the module will reset the Downlink Data % to 85%. Issue 6.0 May 2011 Page 44 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 26: Max Range & Downlink Data on AP "Configuration => Radio" page. Suggested Control Slot settings as a function of number of SMs in the sector are shown in Table 13. Generally all APs in a cluster should use the same number of control slots so as to keep the frame structures, and thereby the send and receive timing, the same. Table 13: PMP 400/430 AP Control Slot Settings Number of SMs that Register to the AP Suggested Number of Control Slots 1 to 10 11 to 50 51 to 150 151 to 200 11 or 2 4 6 8 Note 1: Any OFDM sector with the Hi Priority Channel enabled on any SM should be configured with at least 1 Control Slot on the AP. In some cases operators may find that sectors with high levels of small packet requests, such as might be seen in a sector handling several VoIP streams, benefit overall from slightly higher Control Slot settings. If different sectors require different numbers of Control Slots, the operator should use the Frame Calculator to find a combination of settings that put Rec SEQ Start times within 300 bit times. See section 3.7.2 on page 39 for details. Control Slots are reserved for SMs bandwidth requests and never handle data. A higher number of control slots gives higher probability that an SMs bandwidth request will be heard when the system is heavily loaded, but with the tradeoff that sector capacity is reduced by about 100 kbps for each Control Slot configured, so there will be less capacity to handle the request. Uplink Data Slots are used first for data. If they are the not needed for data in a given frame the data slot can be used by the SMs for bandwidth requests. This allows SMs in sectors with zero control slots configured to still make bandwidth requests using unused data slots. Downlink Data %, Range, and Control Slots should be set consistent with the results of any collocation planning done using OFDM and FSK frame calculators in section 3.7.2 on page 39. The BHM performs its own ranging and so no range need be set for it. BHMs do not have settings for control slots, as there is no bandwidth request contention on the one-to-one link. Issue 6.0 May 2011 Page 45 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 4.4 DFS AND REGULATORY PARAMETERS FOR 5.8 & 5.4 GHZ RADIOS Dynamic Frequency Selection (DFS) is a requirement in several countries and regions for 5 GHz unlicensed systems to detect radar systems and avoid co-channel operation. DFS and other regulatory requirements drive the settings for the following parameters, as discussed in this section:

Region Code Primary Frequency Alternate 1 and Alternate 2 Frequencies External Antenna Gain On the AP/BHM, the Home => DFS Status page shows current DFS status of all three frequencies and a DFS log of past DFS events. Unlike standard Canopy, the PMP 400/430 and PTP 200/230 Series AP, SM, and BH do not offer Whitening, as the OFDM technology obviates the need for it. Figure 27: DFS Status on AP "Home => DFS Status" page. Background and Operation 4.4.1 The modules use region-specific DFS based on the Region Code selected on the modules Configuration => General page. By directing installers and technicians to set the Region Code correctly, the operator gains confidence the module is operating according to national or regional regulations without having to deal with the details for each region. Available Region Codes include Other, United States, Canada, Europe, Brazil, India, Russia, Indonesia and Australia. Operators in regions or countries not listed and with requirements aligned with one of the listed countries should set the Region Code to that country. Operators in regions or countries with no requirements for DFS should use the Other Region Code. New APs and BHMs from the factory will show a Region Code of None, and will not transmit until the Region Code is set to a value other than None. Canada, United States and Europe have requirements to avoid certain 5.4-GHz frequencies used by some weather radar. To meet this requirement, modules set to a Region Code of Canada, United States or Europe will display the center channel frequencies shown in Table 10 on page 35 on the APs and BHMs Carrier Frequency pop-up and on the SMs and BHSs Frequency Scan Selection List. Issue 6.0 May 2011 Page 46 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 14 shows the details of DFS operation and channels available for each Region Code, including whether DFS is active on the AP/BHM, SM/BHS, which DFS regulation apply, and any channel restrictions. DFS does not apply to 4.9 GHz. Table 14: 5.4 / 5.8 GHz OFDM DFS Operation based on Region Code Region Code1 Frequency AP/BHM SM/BHS United States Canada Europe Brazil Australia Russia India Other 5.4 GHz FCC/IC DFS3 No effect 5.8 GHz No effect No effect 5.4 GHz FCC/IC DFS3 No effect 5.8 GHz No effect No effect 5.4 GHz 5.8 GHz ETSI DFS4 ETSI DFS ETSI DFS5 ETSI DFS 5.4 GHz ETSI DFS No effect 5.8 GHz No effect No effect 5.4 GHz FCC/IC DFS No effect 5.8 GHz No effect No effect 5.4 GHz No effect No effect 5.8 GHz No effect No effect 5.4 GHz No effect No effect 5.8 GHz No effect No effect 5.4 GHz No effect No effect 5.8 GHz No effect No effect Weather Radar Notch-

Out Yes No Yes No Yes No No No Yes No No No No No No No 1. In all cases set the Region Code to the region you are in and the equipment will provide DFS consistent with that regions regulations. For countries or regions not listed, use a Region Code that provides DFS functionality and channels consistent with your countrys regulatory requirements. 2. In some countries and regions, 5600 MHz to 5650 MHz is notched out to meet requirements to not transmit in weather radar frequencies. 3. FCC/IC indicates compliance with FCC Report and Order 03-287 and Industry Canada requirements. 4. ETSI DFS indicates compliance with ETSI EN 301 893 v1.4.1 5. ETSI DFS indicates compliance with ETSI EN 302 502 v1.2.1 After an AP or BHM with DFS boots it performs a channel availability check on its main carrier frequency for 1 minute, monitoring for the radar signature without transmitting. If no radar signature is detected during this minute, the module then proceeds to normal beacon transmit mode. If it does detect a radar signature, the frequency is marked for a 30 minute non-occupancy period, and the module moves to its 1st alternate carrier frequency. The AP/BHM continues this behavior through its 2nd alternate frequency if needed and then waits until the first frequency ends the 30 minute non-occupancy period. While operating, if the AP/BHM detects a weather Issue 6.0 May 2011 Page 47 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement radar signature it marks the current carrier frequency for a 30 minute non-occupancy period and moves to check the next-in-line carrier frequency. An SM/BHS does not begin transmission until it detects a beacon from an AP/BHM. If APs/BHMs are not transmitting, SMs/BHSs will be silent. The FCC and IC require DFS only on APs/BHMs. Europe applies the ETSI specification to both APs/BHMs and SMs/BHSs, while Brazil applies it only to AP/BHMs. In the ETSI case, when an SM/BHS boots, it scans to find a Canopy beacon from a AP/BHM. If an AP/BHM is found, the SM/BHS performs a channel availability check on that frequency for 1 minute, monitoring for the radar signature, without transmitting. A DFS decision is made based on the following:

If no radar pulse is detected during this 1 minute, the SM/BHS proceeds through normal steps to register to an AP/BHM. If the SM/BHS does detect radar, it locks out that frequency for 30 minutes and continues scanning other frequencies in its scan list. Note, after an SM with DFS has seen a radar signature on a frequency and locked out that frequency, it may connect to a different AP if color codes, AP transmitting frequencies, and SM scanned frequencies support that connection. BHSs would not be expected to connect to a different BHM, as backhaul links should be configured using color codes and authentication to ensure a BHS only connects with its intended BHM. To simplify operation and ensure compliance, an SM/BHS takes on the DFS type of the AP/BHM to which it registers. For example, when an SM in Europe registers to an AP with the Region Code set to Europe, that SM will use ETSI DFS, no matter what its Region Code is set to, even if its Region Code is set to None. Note, the operator should still configure the Region Code in the SM correctly, as future releases may use the Region Code for additional region-specific options. For all modules running DFS, the module displays its DFS state on its Home => General Status page as one of the following:

Checking Channel Availability Remaining time n seconds, where n counts down from 60 to 1. Normal Transmit Radar Detected Stop Transmitting for n minutes, where n counts down from 30 to 1. Idle, only for SM/BHS, indicates module is scanning, but has not detected a beacon from an AP/BHM. Once it detects beacon, the SM/BHS begins a Channel Availability Check on that frequency. 4.4.2 Setting DFS and Regulatory Parameters Setting the Region Code All modules display a Region Code pop-up on the Configuration => General page as shown in Figure 28 on page 50. On new modules from the factory, or after resetting to factory defaults, the operator should set this Region Code consistent with their country or region. For countries or regions not listed in the Region Code pop-up, set the Region Code consistent with your countrys regulatory Issue 6.0 May 2011 Page 48 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement requirements. For example, several countries in South America follow the same DFS regulations as Brazil, so in those countries the Region Code should be set to Brazil. IMPORTANT!

Operators under regulatory requirements for DFS must ensure the new Canopy parameter Region Code is set correctly. This applies to initial configuration, after a module is reset to factory defaults, or after a module is upgraded. An AP or BHM will not transmit if the Region Code is configured to None. IMPORTANT!

On APs or BHMs received from the factory, with Region Code set to None, the operator must set the Region Code before the module will transmit. The same is true of APs and BHMs which have been reset to factory defaults. Issue 6.0 May 2011 Page 49 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 28: Region Code on AP Configuration => General page An SM/BHS has both a configurable Region Code and, once it registers to an AP or BHM, an active Regional Code. After an SM/BHS registers to an AP/BHM, it uses the region code of the AP/BHM to determine its DFS behavior and displays the AP/BHMs region code on its Home =>

General Status page, as shown in Figure 30. The two Region Codes on an SM/BHS should be the same in normal operation. However, they will not be the same if, for example, an SM configured with a Region Code of None has registered to an AP with a Region Code of Europe as shown in Figure 29 and Figure 30. Issue 6.0 May 2011 Page 50 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 29: Configured Region Code on SM Configuration => General page Figure 30: Active Region Code on SM Home => General Status page The AP or BHM always operates under its manually configured Region Code (the one on the Configuration => General page), and so does not show a Region Code on its Home => General Status page. Under normal operations, APs and BHMs operating with DFS (see Table 14) will experience an additional minute after power-up or reboot before they will register any SMs or BHSs. SMs and BHSs operating with DFS (see Table 14) will experience an additional minute after they reboot before they will register to an AP or BHM. It takes two reboots to set the parameters described below on a module starting from factory defaults. Set the Region Code as described above, Save Changes, and Reboot. If the module Issue 6.0 May 2011 Page 51 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement then invokes DFS (based on the region code and frequency band as shown in Table 14), the Radio Frequency Carriers and External Antenna Gain parameters will be displayed. Set them as described below, Save Changes, and Reboot again. IMPORTANT!

Set the Region Code, Save Changes, and Reboot to see the context-

sensitive DFS parameters. Unlike with many context-sensitive parameters, these do not appear in the GUI with only a Save Changes. Setting Radio Frequencies APs and BHMs running DFS include an option for setting up to two alternate frequencies on the Configuration => Radio page, in addition to the primary frequency. These alternate frequencies are used in the unlikely event radar is detected and the main frequency is locked out due to DFS detection. If these are left at None, no backup frequencies will be used in the case of DFS detection, and the AP or BHM will lock itself out from any transmission for 30 minutes. If radar is detected on the main frequency, either at startup or during operation, a Channel Availability Check will be performed on the 1st alternate frequency before it is then used for transmission. If radar is detected on the 1st alternate frequency, either during Channel Availability Check or during operation, a Channel Availability Check will be performed on the 2nd alternate frequency before it is then used for transmission. If radar is detected on the 2nd alternate frequency, either during Channel Availability Check or during operation, the radio will cease transmission unless or until the primary channel clears its 30-minute lock-out. The alternate frequencies configured in the AP/BHM must be included in the SM/BHSs Frequency Scan List, or the SMs/BHS cant follow their AP/BHM if it switches to a new channel. Additional frequencies may checked in the Frequency Scan List depending on local practices, for example an operator may want to configure an SM to only register on certain frequencies to drive a known SM to AP mapping. Another example would be an operator who configures an SM to register on many frequencies so that it may find another AP to register to if its usual AP isnt available. Note: use site surveys and RF planning to choose alternate frequencies useful for each sector, and consider testing on the alternate frequencies to ensure compatibility with the sectors RF environment. EXTERNAL GAIN FIELD 4.5 An AP, SM, or BH needs to know the gain of its antenna to perform DFS and Auto-TPC

(Automatic Transmit Power Control) (SM only) consistent with regional or national regulations. The GUI includes an External Gain field to support this. Key points about the External Gain field include:

External Gain is defined as the gain of the antenna minus the loss in the coaxial cable and connectors. The External Gain is set on the Configuration => Radio page of each module (AP, SM, BHM, or BHS) The default on a 5.4-GHz SM or a unit reset to factory defaults is 17 dB. The default on a 5.8-GHz SM or a unit reset to factory default is 17 dB The range is 0 to 35 dB. Issue 6.0 May 2011 Page 52 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement A 5.4-GHz SM or BH with an integrated antenna has an External Gain of 17 dB. The antenna sold with the connectorized 5.4 or 5.8 GHz AP has a gain of 18 dB and cable loss of approximately 1 dB, giving an External Gain of 17 dB. A 4.9 GHz SM or BH with an integrated antenna has an External Gain of 17 dB. The antenna sold with the connectorized 4.9 GHz AP has a gain of 18 dB and cable loss of approximately 1 dB, giving an External Gain of 17 dB. Any radio using DFS will use the External Gain to appropriately adjust sensitivity to radar signals. The use of DFS is determined by the Region Code setting on the Configuration

=> Home page. The Auto-TPC used by the PMP 400/430 and PTP 230 Series system takes into account the External Gain so as not to exceed national or regional EIRP limits. Procedure for setting the External Gain 1. If using a BH or SM with an integrated antenna or a connectorized AP with the connectorized antenna sold with it, leave the External Gain on the Configuration =>

Radio page set to the factory default of 17 dB. If using another antenna, set the External Gain to the gain of the antenna minus the loss in coaxial cable and connectors. IMPORTANT!

Ensure the External Gain is set correctly. Setting it low or high can lead to either a system overly sensitive to DFS events or a system not transmitting at its full legal power. 4.6 NETWORK CONTROL PARAMETERS Parameters for High Priority/DiffServ, NAT, DHCP, VLAN, MIR, and CIR are configured the same as they are in standard Canopy. The operator may (or may not) want to take advantage of the higher possible MIR to provide greater bandwidth to a given SM. FORWARD ERROR CORRECTION 4.7 PMP 400/430 and PTP 200 Series radios use FEC (Forward Error Correction) to extend the range of the modules. They use Reed-Solomon error correction optimized at 3/4 coding. The coding rate is not settable by the operator. CYCLIC PREFIX (CONFIGURABLE ONLY ON PTP 200/230 BH & PMP 4.8 430 AP/SM) OFDM technology uses a cyclic prefix, where a portion of the end of a symbol (slot) is repeated at the beginning of the symbol (slot) to allow multi-pathing to settle before receiving the desired data. A 1/4 cyclic prefix means that for every 4 bits of throughput data transmitted, an additional bit is used, A 1/8 cyclic prefix means that for every 8 bit of throughput data transmitted, an additional bit is used. Issue 6.0 May 2011 Page 53 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement PMP 400 Series networks use a cyclic prefix of 1/4 that is not configurable by the operator. PMP 430 and PTP 230 Series networks use a default cyclic prefix of 1/4 that is configurable by the operator to 1/8 or 1/16. The Cyclic Prefix is set on the Configuration => Radio page on the AP. Changing the default from 1/4 to 1/8 can increase throughput by ~2 Mbps (assuming 75%

duty cycle in PMP 430 networks) in installations with low multipath conditions. It is recommended to test 1/8 or 1/16 cyclic prefix to determine actual performance based on RF conditions. PTP 200 Series modules (OFDM BHs) are settable for either 1/8 or 1/4 cyclic prefix. The use of 1/8 cyclic prefix provides about 11% higher maximum throughput, and is recommended for backhaul operations in most cases. The Cyclic Prefix is set on the Configuration => Radio page of the BHM. The default on a new unit or when the unit is reset to factory defaults is 1/4 Cyclic Prefix. In most deployments, 1/8 or 1/16 Cyclic Prefix will provide a high quality, higher throughput link. In cases with severe multi-pathing or obstructions, 1/4 Cyclic Prefix may give better overall results. Procedure for setting the Cyclic Prefix Set the Cyclic Prefix on the Configuration => Radio page of both the BHM and the BHS to 1/8 before deployment. IMPORTANT!

The Cyclic Prefix must be set the same on both the BHM and the BHS. If they dont match, the BHS will not register to the BHM. During installation use Link Tests to confirm link quality per standard installation and alignment procedures. If a Link Test shows low throughput or efficiency, consider changing the Cyclic Prefix to 1/4 on both the BHM and the BHS along with other standard installation troubleshooting procedures such as re-aiming, off-axis aiming, changing location, raising or lowering the height of the radio, adjusting Transmission Power up or down, or identifying and mitigating sources of interference. Issue 6.0 May 2011 Page 54 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 5 Installation WARNING!

Installing a unit usually involves height, electricity, and exposure to RF

(Radio Frequency) energy. To avoid personal injury, follow applicable national and local safety regulations along with industry best practices. Also follow the specific guidelines in this document, including Exposure Separation Distances in section 6.3 on page 71. INSTALLING AN AP WITH CONNECTORIZED ANTENNA 5.1 This section addresses installation aspects specific to the PMP 400/430 and PTP 200 Series AP. General communications equipment, infrastructure, and facilities site design should be performed in line with Motorolas Standards and Guidelines for Communications Sites (also known as the R56 manual). The R56 manual is available in either CD soft copy (part no. 9880384V83) or three-

ring bound color hard copy (6881089E50). Both may be purchased from Motorola Customer Care Services (1-800-814-0601). These procedures are specific to the case of as AP purchased as a kit consisting of a connectorized antenna and a connectorized radio. They are also generally applicable to connectorized APs, SMs, or BHs when the antenna is purchased separately by the operator. A short coaxial cable from the radio terminates in a male N connector. The antenna has a chassis-mounted female N connector. The antenna includes tower mount brackets with adjustable down-tilt. Installing an AP typically consists of four phases:

5. Configuring the AP at an operator's facility or at the installation site using the information and settings defined previously in Planning (Section 3) and Configuring

(Section 4). 6. Assembling the AP (radio and antenna and brackets) and physically installing it using Procedure 2 for 5.8 and 5.4 GHz APs or Procedure 3 for 4.9 GHz APs, along with physically installing a CMMmicro (for PMP 54400 AP only) or CMM4 (for either PMP 58430, 54430, 54400 or PMP 49400). 7. Cabling the AP to the CMMmicro (for PMP 54400 AP only) or CMM4 (for either PMP 58430, 54430, 54400 or PMP 49400), and grounding it to Protective Earth PE using Procedure 4. This phase can also include cabling to backhauls, or running terrestrial feeds. 8. Confirming operation, using SMs in the field. Local practices and choices of installation options will dictate the actual processes. For example, variations on these generalized procedures can be used to install on a building or install multiple APs on a pipe mount before hoisting up a tower for final attachment. Issue 6.0 May 2011 Page 55 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Procedure 2: Assembling a 5.8 or 5.4 GHz AP, and attaching to tower 1. Perform a parts check to ensure all parts are present. 2. Assemble the upper bracket, per the diagram that comes with the antenna. 3. Connect the radio to the antenna by sliding it into the captive space. Secure the radio to the antenna using the two bolts provided. 4. Assemble the lower bracket on the antenna assembly. Although it may seem intuitive to attach both brackets to the tower or pole and then hang the antenna, it usually works better to have the bottom bracket already attached to the antenna before climbing. 5. Weatherproof the connector with waterproof wrap. Issue 6.0 May 2011 Page 56 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 6. Use standard work and safety practices for tower climbing. Connect the upper bracket to a pole, mounting fixture, or the tower. 7. Hang the antenna assembly on the upper bracket. 8. Connect the lower bracket to the pole or tower using the quick-connect system provided 9. The quick-connect system allows easy attachment, detachment, and adjustment without any lose parts. Issue 6.0 May 2011 Page 57 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 10. Adjust down tilt per calculations done during Planning. Confirm down tilt after the radio is operational using SMs in the field at selected test locations. Procedure 3: Assembling a 4.9 GHz AP, and attaching to tower 1. Perform a parts check to ensure all parts are present. 2. Assemble unit per the instructions that come with the kit. Issue 6.0 May 2011 Page 58 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 3. Connect the radio to the antenna by sliding it into the captive space. Secure the radio to the antenna using the two bolts provided. 4. Connect coax N-connector 5. Use standard work and safety practices for tower climbing, and connect the upper assembly to a pole, mounting fixture, or the tower. Issue 6.0 May 2011 Page 59 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 6. Adjust down tilt per previous calculations done during Planning. Confirm down tilt after the radio is operational using SMs in the field at selected test locations. Issue 6.0 May 2011 Page 60 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Procedure 4: Cabling and Grounding/Earthing the AP 1. Standard Canopy installation practices apply, including using shielded Ethernet cable for all infrastructure cabling, using drip loops, providing extra cable for future use at any termination, and ensuring the tower or structure is fully grounded (Protective Earth PE). 2. Use dielectric grease (which is uniformly non-conducting) on all connections and in all RJ-45 Ethernet connectors. The best practice is to use enough grease to fill the RJ-45 female connector, and then insert the RJ-45 male connector and push the grease further into the Canopy unit and around the RJ-45 connector. Excess grease can be wiped over the connector area to provide some resistance to water ingress around the connector. 3. Use a 600SS surge suppressor within 3 ft (~1 m) of the AP and ground it to known good ground (Protective Earth - PE) on the tower or support structure with a 10 AWG ground strap. 4. A pole mount kit is available for mounting the 600SS to the tower or mast. The mount includes a termination point for the ground strap from the 600SS. 5. Run a 10 AWG ground strap from the ground lug on the AP (see Figure 31) to known good ground (Protective Earth - PE) to complete the grounding and protection of the AP. The termination point on the 600SS pole mount kit may be used for this. Figure 31: Ground lug highlighted on AP The PMP 400/430 AP and PTP 200 Series BH have metal-to-metal contact from the tower or support structure, through the antenna, through the coax cable, to the radio. Installing surge suppression at the AP is strongly recommended to provide the best protection from near lightning hits. Issue 6.0 May 2011 Page 61 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Install a 600SS surge suppressor within 3 ft (~1 m) of an AP or BH. A pole mount kit for the 600SS is shown in Figure 16 to facilitate installation of the 600SS by the AP or BH. Up to four 600SS surge suppressors may be mounted in series on an Ethernet link without degrading the link. The equivalent of a 600SS is built into each of the 8 ports on a CMM4 and counts as one of the four. The CMMmicro uses a different protection scheme and does not have the equivalent of a 600SS on each port. As an example, a typical installation might have properly-grounded 600SS units within 3 ft of each AP and additional properly-grounded 600SS units on each Ethernet cable mounted outside at the point of cable entry to a telecommunications hut that contains the CMM4. INSTALLING AN SM OR BH WITH AN INTEGRATED ANTENNA 5.2 Installing an SM or BH with an integrated antenna is very similar to installing standard Canopy SMs as described in the Motorola PMP Solutions User Guide, with the differences outlined below. Use an SMMB2 SM mounting bracket for the PMP 54400 and 49400 SM and a SMMB1 mounting bracket for the PMP 58430/54430 SM and PTP 58230/54230 BH. The PMP 400 Series SM or the PTP 200 Series BH is heavier and has a higher wind load than a classic Canopy module, and so the stronger SMMB2 is required. The SMMB2 is the mounting arm used with Canopy 900 MHz integrated APs and SMs, and used with reflectors. Use dielectric grease (which is uniformly non-conducting) on all connections and in all RJ-45 Ethernet connectors. The best practice is to use enough grease to fill the RJ-45 female connector, and then insert the RJ-45 male connector and push the grease further into the Canopy unit and around the RJ-45 connector. Excess grease can be wiped over the connector area to provide some resistance to water ingress around the connector. Figure 32: Dielectric Grease Apply to RJ45 connector Issue 6.0 May 2011 Page 62 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Figure 33: Dielectric Grease - Insert Ethernet Cable The PMP 400 SM and PTP 200 BH have a ground/Protective Earth lug, just like the AP. Although not as critical as in the case of the AP (where there is metal-to-metal connectivity through the coax and antenna to ground), the lug can be used to ground the SM or BH for additional protection. In addition, a 600SS can be used within 3 ft (1 m) of the SM or BH to provide additional protection. Especially for a BH, or in cases where the SM is mounted high and is more exposed, or in known difficult areas for lightning, consider using these two techniques to increase the radios resistance to lightning. In all cases where Ethernet cables penetrate a building, home, or telecommunications hut, mount a properly-grounded 600SS outside at the point of Ethernet cable building entry to protect persons and property in the building. PMP 400/430 and PTP 200/230 Series modules do not display a jitter value. Use Receive Power Level for aiming and then use Link Tests to confirm alignment. The Receive Power Level is a relative, not absolute, value. The Receive Power Level on a module is useful during installation to aid in aiming where relative values over a short period of time are of interest. The displayed Receive Power Level is not designed to be highly accurate over time. The displayed Receive Power Level will vary with board-level temperature and may vary from module to module even if the actual received power is not varying. Know the limitations and use caution and judgment for any other use of Receive Power Level. Caution is advised when using Receive Power Level for monitoring a link over time, deciding if the link is within operating margins, deciding if a link is serviceable (link tests give a much better indication), or comparing the link to other links. The alignment headset will play a tone that varies in pitch (received power level), but not volume

(jitter), since PMP 400/430 and PTP 200/230 Series modules dont calculate a jitter. Issue 6.0 May 2011 Page 63 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 6 Regulatory and Legal Notices IMPORTANT NOTE ON MODIFICATIONS 6.1 Intentional or unintentional changes or modifications to the equipment must not be made unless under the express consent of the party responsible for compliance. Any such modifications could void the users authority to operate the equipment and will void the manufacturers warranty. 6.2 NATIONAL AND REGIONAL REGULATORY NOTICES U.S. Federal Communication Commission (FCC) Notification 6.2.1 For 5.4-GHz and 5.8-GHz devices:

This device complies with Part 15 of the US FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the US FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference by one or more of the following measures:

Increase the separation between the affected equipment and the unit;

Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to;

Consult the dealer and/or experienced radio/TV technician for help. For 4.9-GHz devices:

The 4.9-GHz band is a licensed band allocated to public safety services. State and local government entities that provide public safety services are eligible to apply for 4.9 GHz licenses. For additional information, refer to FCC regulations. FCC IDs and the specific configurations covered are listed in Table 15. Issue 6.0 May 2011 Page 64 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 15: US FCC IDs and Industry Canada Certification Numbers and Covered Configurations Frequencies Module Families Antenna Maximum Tx Output Power 19 dBm 5780APC 17 dBi connectorized PCTEL Model 8514724E01 antenna (60 x 5 -3 dB beam width) with 1 dB connector cable loss FCC ID Industry Canada Cert Number ABZ89FT7634

ABZ89FT7635 109W-5790 5790SM 10 dBi (55 x 55 and 3 dB beam width) 19 dBm 5780 BH 5781 BH 10 dBi (55 x 55 and 3 dB beam width) 19 dBm 5 MHz channels, centered on 5727.5-

5845 in 5 MHz increments (within the 5725-5850 MHz ISM band) 10 MHz channels, centered on 5730-

5845 in 5 MHz increments (within the 5725-5850 MHz ISM band) 20 MHz channels, centered on 5735-

5840 in 5 MHz increments (within the 5725-5850 MHz ISM band) 5 MHz channels, centered on 5727.5-

5845 in 5 MHz increments (within the 5725-5850 MHz ISM band) 10 MHz channels, centered on 5730-

5845 in 5 MHz increments (within the 5725-5850 MHz ISM band) 20 MHz channels, centered on 5735-

5840 in 5 MHz increments (within the 5725-5850 MHz ISM band) 10 MHz channels, centered on 5730-

5845 in 5 MHz increments (within the 5725-5850 MHz ISM band) 20 MHz channels, centered on 5735-

5840 in 5 MHz increments (within the 5725-5850 MHz ISM band) Issue 6.0 May 2011 Page 65 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement ABZ89FT7637 109W-5480 ABZ89FT7638 109W-5490

109W-5780

109W-5790 10 MHz channels, centered on 5480-

5595 and 5655-5710 MHz in 5 MHz increments (within the 5470-5725 MHz U-NII band with 5600-5650 MHz excluded) 20 MHz channels, centered on 5485-

5590 and 5660-5705 MHz in 5 MHz increments (within the 5470-5725 MHz U-NII band with 5600-5650 MHz excluded) 10 MHz channels, centered on 5480-

5595 and 5655-5710 MHz in 5 MHz increments (within the 5470-5725 MHz U-NII band with 5600-5650 MHz excluded) 20 MHz channels, centered on 5485-

5590 and 5660-5705 MHz in 5 MHz increments (within the 5470-5725 MHz U-NII band with 5600-5650 MHz excluded) 5 MHz channels, centered on 5727.5-

5845 in 5 MHz increments (within the 5725-5850 MHz ISM band) 10 MHz channels, centered on 5730-

5845 in 5 MHz increments (within the 5725-5850 MHz ISM band) 20 MHz channels, centered on 5735-

5840 in 5 MHz increments (within the 5725-5850 MHz ISM band) 5 MHz channels, centered on 5727.5-

5845 in 5 MHz increments (within the 5725-5850 MHz ISM band) 5480 APC 17 dBi connectorized PCTEL Model 8514724E01 antenna (60 x 5 -3 dB beam width) with 1 dB connector cable loss 10 dBm 13 dBm 17 dBm 19 dBm 19 dBm 10 dBi (55 x 55 -3 dB beam width) 5490 SM 5480 BH 5481 BH 5780APC 17 dBi connectorized PCTEL Model 8514724E01 antenna (60 x 5 -3 dB beam width) with 1 dB connector cable loss 5790SM 10 dBi (55 x 55 and 3 dB beam width) 19 dBm Issue 6.0 May 2011 Page 66 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 10 MHz channels, centered on 5730-

5845 in 5 MHz increments (within the 5725-5850 MHz ISM band) 20 MHz channels, centered on 5735-

5840 in 5 MHz increments (within the 5725-5850 MHz ISM band) 10 MHz channels, centered on 5480-

5595 and 5655-5710 MHz in 5 MHz increments (within the 5470-5725 MHz U-NII band) 10 MHz channels, centered on 5480-

5595 and 5655-5710 MHz in 5 MHz increments (within the 5470-5725 MHz U-NII band with 5600-5650 MHz excluded) 10 MHz channels, centered on 4945-

4985 in 5 MHz increments (within the 4940-4990 MHz public safety licensed band) ABZ89FT7629

109W-5440 ABZ89FT7631 109W-4940 5440 AP 18 dBi connectorized PCTEL Model 8514724E01 antenna (60 x 5 -3 dB beam width) with 1 dB connector cable loss 10 dBm 5440 SM 5440 BH 17 dBi integrated antenna

(15 x 15 -3 dB beam width) 10 dBm 5440 AP 18 dBi connectorized PCTEL Model 8514724E01 antenna (60 x 5 -3 dB beam width) with 1 dB connector cable loss 10 dBm 5440 SM 5440 BH 17 dBi integrated antenna

(15 x 15 -3 dB beam width) 10 dBm 4940 AP 18 dBi connectorized PCTEL Model AP 85010066001 antenna (60 x 5 -3 dB beam width) with 1 dB cable loss 18 dBm 4940 SM 4940 BH 17 dBi integrated antenna

(15.5 x 17.5 (el x az) -3 dB beam width) 18 dBm Note 1: To ensure regulatory compliance, including DFS compliance, the professional installer is responsible for:

setting the Region Code on the Configuration => General page to the correct region setting the Transmitter Output Power on the Confiiguration => Radio page no higher than listed for a given configuration setting the External Gain on the Configuration => Radio page, if displayed, to the gain of any external device (such as a reflector or lens) Industry Canada (IC) Notification 6.2.2 For 5.4 and 5.8-GHz devices:

This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Users should be cautioned to take note that in Canada high power radars are allocated as primary users (meaning they have priority) of 5650 5850 MHz and these radars could cause interference and/or damage to license-exempt local area networks (LELAN). Issue 6.0 May 2011 Page 67 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to RSS-210 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference by one or more of the following measures:

Increase the separation between the affected equipment and the unit;

Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to;

Consult the dealer and/or experienced radio/TV technician for help. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so its Equivalent Isotropic Radiated Power (EIRP) is not more than that permitted for successful communication. Industry Canada Certification Numbers and the specific configurations covered are listed in Table 15. This device has been designed to operate with the antennas listed in Table 15 and having a maximum gain as shown in Table 15. Antennas not included in Table 15 or having a gain greater than as shown in Table 15 are strictly prohibited from use with this device. Required antenna impedance is 50 ohms. For 4.9-GHz devices:

The 4.9-GHz band is a licensed band allocated to public safety services. State and local government entities that provide public safety services are eligible to apply for 4.9 GHz licenses. For additional information, refer to Industry Canada regulations. 6.2.3 Regulatory Requirements for CEPT Member States (www.cept.org) When operated in accordance with the instructions for use, Motorola Canopy Wireless equipment operating in the 5.4 GHz bands is compliant with CEPT Recommendation 70-03 Annex 3 for Wideband Data Transmission and HIPERLANs. For compliant operation in the 5.4 GHz band, the transmit power (EIRP) from the integrated antenna or a connectorized antenna shall be no more than 0.5 W (27 dBm). For EU member states, RLAN equipment in the 5.4GHz bands is exempt from individual licensing under Commission Recommendation 2003/203/EC. Contact the appropriate national administrations for details on the conditions of use for the bands in question and any exceptions that might apply. Also see www.ero.dk for further information. 10 MHz channels are used, centered on 5475 to 5595 and 5655 to 5715 in 5 MHz increments. This is within the 5470 to 5725 MHz U-NII band with 5600 to 5650 MHz excluded. Motorola Canopy Radio equipment operating in the 5470 to 5725 MHz band are categorized as Class 1 devices within the EU in accordance with ECC DEC(04)08 and are CE marked to show compliance with the European Radio & Telecommunications Terminal Equipment

(R&TTE) directive 1999/5/EC. The relevant Declaration of Conformity can be found at http://motorola.wirelessbroadbandsupport.com/doc.php. A European Commission decision, implemented by Member States on 31 October 2005, makes the frequency band 5470-5725 MHz available in all EU Member States for wireless access systems. Under this decision, the designation of Canopy 5.4GHz products become Class 1 Issue 6.0 May 2011 Page 68 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement devices and these do not require notification under article 6, section 4 of the R&TTE Directive. Consequently, these 5.4GHz products are only marked with the any member state. symbol and may be used in For further details, see http://europa.eu.int/information_society/policy/radio_spectrum/ref_documents/index_en.htm 6.2.4 European Union Notification for 5.8 GHz Product The 5.7 and 5.8 GHz connectorized product is a two-way radio transceiver suitable for use in Broadband Wireless Access System (WAS), Radio Local Area Network (RLAN), or Fixed Wireless Access (FWA) systems. It is a Class 2 device and uses operating frequencies that are not harmonized throughout the EU member states. The operator is responsible for obtaining any national licenses required to operate this product and these must be obtained before using the product in any particular country. This equipment is marked to show compliance with the European R&TTE directive 1999/5/EC. The relevant Declaration of Conformity can be found at http://motorola.wirelessbroadbandsupport.com/doc.php. 6.2.5 Equipment Disposal Waste (Disposal) of Electronic and Electric Equipment Please do not dispose of Electronic and Electric Equipment or Electronic and Electric Accessories with your household waste. In some countries or regions, collection systems have been set up to handle waste of electrical and electronic equipment. In European Union countries, please contact your local equipment supplier representative or service center for information about the waste collection system in your country. 6.2.6 EU Declaration of Conformity for RoHS Compliance Motorola hereby declares that these Motorola products are in compliance with the essential requirements and other relevant provisions of Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances (RoHS) in electrical and electronic equipment. The relevant Declaration of Conformity can be found at http://motorola.wirelessbroadbandsupport.com/doc.php. 6.2.7 UK Notification The 5.8 GHz connectorized product has been notified for operation in the UK, and when operated in accordance with instructions for use it is compliant with UK Interface Requirement IR2007. For UK use, installations must conform to the requirements of IR2007 in terms of EIRP spectral density against elevation profile above the local horizon in order to protect Fixed Satellite Services. The frequency range 5795-5815 MHz is assigned to Road Transport & Traffic Telematics (RTTT) in the U.K. and shall not be used by FWA systems in order to protect RTTT devices. UK licensing specifies that radiolocation services shall be protected by a Dynamic Frequency Selection (DFS) mechanism to prevent co-channel operation in the presence of radar signals. 6.2.8 Luxembourg Notification 5.4GHz products can only be used for mobile services. Issue 6.0 May 2011 Page 69 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement 6.2.9 Czech Republic Notification 5.4 GHz products can be operated in accordance with the Czech General License No. GL-30/R/2000. 6.2.10 Greece Notification The outdoor use of 5470-5725MHz is under license of EETT but is being harmonized according to the CEPT Decision ECC/DEC/(04) 08, of 9th July. End users are advised to contact the EETT to determine the latest position and obtain any appropriate licenses. 6.2.11 Brazil Notification Brazil regulatory authorities have not approved these devices for operation in Brazil. Until they are approved, they are not available for sale in Brazil, and the information in this section is provisional and preliminary. For compliant operation in the 5.4 GHz band, the Equivalent Isotropic Radiated Power from the integrated antenna or connectorized anteanna shall not exceed 27 dBm (0.5 W). The operator is responsible for enabling the DFS feature on any Canopy 5.4 GHz radio by setting the Region Code to Brazil, including after the module is reset to factory defaults. Important Note: This equipment operates as a secondary application, so it has no rights against harmful interference, even if generated by similar equipment, and cannot cause harmful interference on systems operating as primary applications. 6.2.12 Labeling and Disclosure Table for China The Peoples Republic of China requires that Motorolas products comply with China Management Methods (CMM) environmental regulations. (China Management Methods refers to the regulation Management Methods for Controlling Pollution by Electronic Information Products.) Two items are used to demonstrate compliance; the label and the disclosure table. The label is placed in a customer visible position on the product. Logo 1 means that the product contains no substances in excess of the maximum concentration value for materials identified in the China Management Methods regulation. Logo 2 means that the product may contain substances in excess of the maximum concentration value for materials identified in the China Management Methods regulation, and has an Environmental Friendly Use Period (EFUP) in years, fifty years in the example shown. Logo 1 Logo 2 The Environmental Friendly Use Period (EFUP) is the period (in years) during which the Toxic and Hazardous Substances (T&HS) contained in the Electronic Information Product (EIP) will not leak or mutate causing environmental pollution or bodily injury from the use of the EIP. The EFUP indicated by the Logo 2 label applies to a product and all its parts. Certain field-replaceable parts, such as battery modules, can have a different EFUP and are marked separately. The Disclosure Table (see Table 16) is intended only to communicate compliance with China requirements; it is not intended to communicate compliance with EU RoHS or any other environmental requirements. Issue 6.0 May 2011 Page 70 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Table 16: Disclosure Table

(Pb)

(Hg)

(Cd)

(Cr6+)

(PBB)

(PBDE) SJ/T11363-2006 SJ/T11363-2006 EXPOSURE SEPARATION DISTANCES 6.3 To protect from overexposure to RF energy, install Canopy radios so as to provide and maintain the minimum separation distances from all persons shown in Table 17. Module Type Separation Distance from Persons Table 17: Exposure Separation Distances PMP 400/430 AP or SM or PTP 200/230 BH At least 20 cm (approx 8 in) PMP 430 SM or PTP 230 with Reflector Dish At least 1.5 m (approx 5 ft) PMP 430 SM or PTP 230 with LENS At least 50 cm (approx 20 in) Canopy Module (for comparison) At least 20 cm (approx 8 in) Section 6.3.1 and Table 18 give details and discussion of the associated calculations. 6.3.1 Details of Exposure Separation Distances Calculations and Power Compliance Margins Limits and guidelines for RF exposure come from:

US FCC limits for the general population. See the FCC web site at http://www.fcc.gov, and the policies, guidelines, and requirements in Part 1 of Title 47 of the Code of Federal Regulations, as well as the guidelines and suggestions for evaluating compliance in FCC OET Bulletin 65. Issue 6.0 May 2011 Page 71 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement Health Canada limits for the general population. See Safety Code 6 on the Health Canada web site at http://www.hc-sc.gc.ca/. ICNIRP (International Commission on Non-Ionizing Radiation Protection) guidelines for the general public. See the ICNIRP web site at http://www.icnirp.de/ and Guidelines for Limiting Exposure to Time-Varying Electric, Magnetic, and Electromagnetic Fields. The applicable power density exposure limits from the documents referenced above are 10 W/m2 for RF energy in the 5.4-GHz frequency bands. Peak power density in the far field of a radio frequency point source is calculated as follows:

where S = power density in W/m2 P = RMS transmit power capability of the radio, in W G = total Tx gain as a factor, converted from dB d = distance from point source, in m Rearranging terms to solve for distance yields Table 18 shows calculated minimum separation distances d, recommended distances and resulting power compliance margins for each frequency band and antenna combination. Table 18: Calculated Exposure Distances and Power Compliance Margins Frequency Band Antenna Variable P G S d

(calcu-

lated) Recom-

mended Separation Distance Power Compliance Margin 5.4 / 5.8 GHz OFDM Integrated, 10 dBi 0.079 W

(19 dBm) 10

(10 dB) Connectori zed, 17 dBi 0.05 W

(10 dBm) 50

(17 dB) 4.9 GHz OFDM Integrated, 10 dBi 0.079 W

(19 dBm) 10

(10 dB) Connectori zed, 17 dBi 0.063 W

(18 dBm) 40

(16 dB) 8 cm 20 cm

(8 in) 6 cm 20 cm

(8 in) 8 cm 20 cm

(8 in) 14 cm 20 cm

(8 in) 10 W/m2 or 1 mW/c m2 10 W/m2 or 1 mW/c m2 10 W/m2 or 1 mW/c m2 10 W/m2 or 1 mW/c m2 6.3 10 6.3 2 Issue 6.0 May 2011 Page 72 of 77 SPG4d2dPG4S PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement The Recommended Distances are chosen to give significant compliance margin in all cases. They are also chosen so that an OFDM module has the same exposure distance as a Canopy module, to simplify communicating and heeding exposure distances in the field. These are conservative distances:

They are along the beam direction (the direction of greatest energy). Exposure to the sides and back of the module will be significantly less. They meet sustained exposure limits for the general population (not just short term occupational exposure limits), with considerable margin. The calculated compliance distance d is overestimated because the far-field equation models the antenna as a point source and neglects the physical dimension of the antenna. 6.4 LEGAL NOTICES 6.4.1 Software License Terms and Conditions ONLY OPEN THE PACKAGE, OR USE THE SOFTWARE AND RELATED PRODUCT IF YOU ACCEPT THE TERMS OF THIS LICENSE. BY BREAKING THE SEAL ON THIS DISK KIT /

CDROM, OR IF YOU USE THE SOFTWARE OR RELATED PRODUCT, YOU ACCEPT THE TERMS OF THIS LICENSE AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS, DO NOT USE THE SOFTWARE OR RELATED PRODUCT; INSTEAD, RETURN THE SOFTWARE TO PLACE OF PURCHASE FOR A FULL REFUND. THE FOLLOWING AGREEMENT IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY), AND MOTOROLA, INC. (FOR ITSELF AND ITS LICENSORS). THE RIGHT TO USE THIS PRODUCT IS LICENSED ONLY ON THE CONDITION THAT YOU AGREE TO THE FOLLOWING TERMS. Now, therefore, in consideration of the promises and mutual obligations contained herein, and for other good and valuable consideration, the receipt and sufficiency of which are hereby mutually acknowledged, you and Motorola agree as follows:

Grant of License. Subject to the following terms and conditions, Motorola, Inc., grants to you a personal, revocable, non-assignable, non-transferable, non-exclusive and limited license to use on a single piece of equipment only one copy of the software contained on this disk (which may have been pre-loaded on the equipment)(Software). You may make two copies of the Software, but only for backup, archival, or disaster recovery purposes. On any copy you make of the Software, you must reproduce and include the copyright and other proprietary rights notice contained on the copy we have furnished you of the Software. Ownership. Motorola (or its supplier) retains all title, ownership and intellectual property rights to the Software and any copies, including translations, compilations, derivative works (including images) partial copies and portions of updated works. The Software is Motorolas (or its supplier's) confidential proprietary information. This Software License Agreement does not convey to you any interest in or to the Software, but only a limited right of use. You agree not to disclose it or make it available to anyone without Motorolas written authorization. You will exercise no less than reasonable care to protect the Software from unauthorized disclosure. You agree not to disassemble, decompile or reverse engineer, or create derivative works of the Software, except and only to the extent that such activity is expressly permitted by applicable law. Termination. This License is effective until terminated. This License will terminate immediately without notice from Motorola or judicial resolution if you fail to comply with any provision of this License. Upon such termination you must destroy the Software, all accompanying written Issue 6.0 May 2011 Page 73 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement materials and all copies thereof, and the sections entitled Limited Warranty, Limitation of Remedies and Damages, and General will survive any termination. Limited Warranty. Motorola warrants for a period of ninety (90) days from Motorolas or its customers shipment of the Software to you that (i) the disk(s) on which the Software is recorded will be free from defects in materials and workmanship under normal use and (ii) the Software, under normal use, will perform substantially in accordance with Motorolas published specifications for that release level of the Software. The written materials are provided "AS IS"

and without warranty of any kind. Motorola's entire liability and your sole and exclusive remedy for any breach of the foregoing limited warranty will be, at Motorola's option, replacement of the disk(s), provision of downloadable patch or replacement code, or refund of the unused portion of your bargained for contractual benefit up to the amount paid for this Software License. THIS LIMITED WARRANTY IS THE ONLY WARRANTY PROVIDED BY MOTOROLA, AND MOTOROLA AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OF IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. MOTOROLA DOES NOT WARRANT THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN REPRESENTATIONS MADE BY MOTOROLA OR AN AGENT THEREOF SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. MOTOROLA DOES NOT WARRANT ANY SOFTWARE THAT HAS BEEN OPERATED IN EXCESS OF SPECIFICATIONS, DAMAGED, MISUSED, NEGLECTED, OR IMPROPERLY INSTALLED. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Limitation of Remedies and Damages. Regardless of whether any remedy set forth herein fails of its essential purpose, IN NO EVENT SHALL MOTOROLA OR ANY OF THE LICENSORS, DIRECTORS, OFFICERS, EMPLOYEES OR AFFILIATES OF THE FOREGOING BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL OR SIMILAR DAMAGES WHATSOEVER (including, without limitation, damages for loss of business profits, business interruption, loss of business information and the like), whether foreseeable or unforeseeable, arising out of the use or inability to use the Software or accompanying written materials, regardless of the basis of the claim and even if Motorola or a Motorola representative has been advised of the possibility of such damage. Motorola's liability to you for direct damages for any cause whatsoever, regardless of the basis of the form of the action, will be limited to the price paid for the Software that caused the damages. THIS LIMITATION WILL NOT APPLY IN CASE OF PERSONAL INJURY ONLY WHERE AND TO THE EXTENT THAT APPLICABLE LAW REQUIRES SUCH LIABILITY. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. Maintenance and Support. Motorola shall not be responsible for maintenance or support of the software. By accepting the license granted under this agreement, you agree that Motorola will be under no obligation to provide any support, maintenance or service in connection with the Software or any application developed by you. Any maintenance and support of the Related Product will be provided under the terms of the agreement for the Related Product. Transfer. In the case of software designed to operate on Motorola equipment, you may not transfer the Software to another party except: (1) if you are an end-user, when you are transferring the Software together with the Motorola equipment on which it operates; or 2) if you are a Motorola licensed distributor, when you are transferring the Software either together with such Motorola equipment or are transferring the Software as a licensed duly paid for upgrade, update, patch, new release, enhancement or replacement of a prior version of the Software. If you are a Motorola licensed distributor, when you are transferring the Software as permitted herein, you agree to transfer the Software with a license agreement having terms and conditions Issue 6.0 May 2011 Page 74 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement no less restrictive than those contained herein. You may transfer all other Software, not otherwise having an agreed restriction on transfer, to another party. However, all such transfers of Software are strictly subject to the conditions precedent that the other party agrees to accept the terms and conditions of this License, and you destroy any copy of the Software you do not transfer to that party. You may not sublicense or otherwise transfer, rent or lease the Software without our written consent. You may not transfer the Software in violation of any laws, regulations, export controls or economic sanctions imposed by the US Government. Right to Audit. Motorola shall have the right to audit annually, upon reasonable advance notice and during normal business hours, your records and accounts to determine compliance with the terms of this Agreement. Export Controls. You specifically acknowledge that the software may be subject to United States and other country export control laws. You shall comply strictly with all requirements of all applicable export control laws and regulations with respect to all such software and materials. US Government Users. If you are a US Government user, then the Software is provided with

"RESTRICTED RIGHTS" as set forth in subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights clause at FAR 52 227-19 or subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013, as applicable. Disputes. You and Motorola hereby agree that any dispute, controversy or claim, except for any dispute, controversy or claim involving intellectual property, prior to initiation of any formal legal process, will be submitted for non-binding mediation, prior to initiation of any formal legal process. Cost of mediation will be shared equally. Nothing in this Section will prevent either party from resorting to judicial proceedings, if (i) good faith efforts to resolve the dispute under these procedures have been unsuccessful, (ii) the dispute, claim or controversy involves intellectual property, or (iii) interim relief from a court is necessary to prevent serious and irreparable injury to that party or to others. General. Illinois law governs this license. The terms of this license are supplemental to any written agreement executed by both parties regarding this subject and the Software Motorola is to license you under it, and supersedes all previous oral or written communications between us regarding the subject except for such executed agreement. It may not be modified or waived except in writing and signed by an officer or other authorized representative of each party. If any provision is held invalid, all other provisions shall remain valid, unless such invalidity would frustrate the purpose of our agreement. The failure of either party to enforce any rights granted hereunder or to take action against the other party in the event of any breach hereunder shall not be deemed a waiver by that party as to subsequent enforcement of rights or subsequent action in the event of future breaches. 6.4.2 Hardware Warranty in US Motorola US offers a warranty covering a period of 1 year from the date of purchase by the customer. If a product is found defective during the warranty period, Motorola will repair or replace the product with the same or a similar model, which may be a reconditioned unit, without charge for parts or labor. LIMIT OF LIABILITY 6.5 IN NO EVENT SHALL MOTOROLA BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGE ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT

(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS, OR FROM ANY BREACH OF WARRANTY, EVEN IF MOTOROLA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. (Some states do not allow the Issue 6.0 May 2011 Page 75 of 77 PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.) IN NO CASE SHALL MOTOROLAS LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT. Issue 6.0 May 2011 Page 76 of 77