| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User Manual Part 1 | Users Manual | 2.76 MiB | May 03 2002 | |||
| 1 |
|
User Manual Part 2 | Users Manual | 1.24 MiB | May 03 2002 | |||
| 1 | Attestation Statements | May 03 2002 | ||||||
| 1 | Cover Letter(s) | May 03 2002 | ||||||
| 1 | External Photos | May 03 2002 | ||||||
| 1 | ID Label/Location Info | May 03 2002 | ||||||
| 1 | RF Exposure Info | |||||||
| 1 | Internal Photos | May 03 2002 | ||||||
| 1 | Cover Letter(s) | May 03 2002 | ||||||
| 1 | RF Exposure Info | May 03 2002 | ||||||
| 1 | Cover Letter(s) | |||||||
| 1 | RF Exposure Info | |||||||
| 1 | Cover Letter(s) | May 03 2002 | ||||||
| 1 | RF Exposure Info | May 03 2002 | ||||||
| 1 | RF Exposure Info | |||||||
| 1 | Test Report | May 03 2002 | ||||||
| 1 | Test Report | May 03 2002 |
| 1 | User Manual Part 1 | Users Manual | 2.76 MiB | May 03 2002 |
6864110R11-O_cvr.qxd 11/30/01 2:09 PM Page 1 Motorola, The Stylized M logo, Professional Radio - As Dedicated As You Are, HT Series, HT1250LS+, and Call Alert are trademarks of Motorola, Inc. PassPort is a trademark of Trident Micro Systems. LTR is a trademark of E.F. Johnson Company. 1999, 2000, 2001 Motorola, Inc. All rights reserved. Printed in U.S.A.
*6864110R11*
6866110R11-O HT1250LS++ User Guide Professional Radio - As Dedicated As You Are 6864110R11-OTOC.fm Page 1 Tuesday, November 20, 2001 11:56 AM CONTENTS Computer Software Copyrights . 5 Safety . 7 User Safety, Training, and General Information . 7 Compliance with RF Energy Exposure Standards. 7 Operational Instructions and Training Guidelines . 8 Transmit and Receive . 8 Hand-held Radio Operation . 8 Body-worn Operation . 8 Antenna & Batteries . 9 Approved Accessories . 9 Electromagnetic Interference/Compatibility 9 Facilities . 9 Aircraft. 9 Medical Devices . 10 Driver Safety . 10 Operational Warnings . 11 For Vehicles With an Air Bag . 11 Potentially Explosive Atmospheres. 11 Blasting Caps and Areas . 11 Operational Cautions. 12 Antennas . 12 Batteries . 12 Battery Information . 12 Charging Batteries . 12 Introduction . 13 Trunked Radio Systems . 13 PassPort Trunked Systems . 13 LTR Trunked Systems . 13 Conventional Radio Systems . 14 HT1250LS+ Radio Features . 14 Radio Wide Features . 14 PassPort Zone Features . 14 LTR Zone Features . 15 Conventional Zone Features . 15 Radio Overview . 17 Parts of the Radio . 17 HT1250LS+ Model . 17 On/Off/Volume Knob . 18 Zone Selector Knob . 18 LED Indicator . 18 Push-to-Talk (PTT) Button . 18 Microphone. 18 Menu Keys . 18 Keypad Keys . 19 C O N T E N T S 1 English 6864110R11-OTOC.fm Page 2 Tuesday, November 20, 2001 11:56 AM S T N E T N O C Display. 21 Programmable Buttons . 22 Audio Indicators for Programmable Buttons . 27 Battery Information . 29 Charging the Battery . 29 Getting Started . 29 Battery Charge Status . 30 Attaching the Battery . 31 Removing the Battery . 31 Accessory Information . 31 Attaching the Antenna . 31 Removing the Antenna . 32 Attaching the Belt Clip . 33 Removing the Belt Clip . 33 Attaching the Side Connector Cover . 34 Turning the Radio On or Off . 34 Adjusting the Volume . 35 Selecting a Trunked Zone and Talkgroup. 35 Sending a Trunked Call . 36 Selecting a Conventional Zone and Channel . 37 Sending a Conventional Call . 37 Receiving a Trunked or Conventional Call 37 Repeater or Talkaround J Mode
(Conventional Operation Only) . 38 Call Light
(Trunked Operation Only) . 38 Home Channel Revert . 39 Sounding an Emergency Siren . 39 To Start the Emergency Siren. 39 To Stop the Emergency Siren . 39 PASSPORT TRUNKING . 41 Seamless Roaming . 41 Initial Registration . 41 Roaming and Registering Between Sites . 42 Site/MIN View . 43 Roam Request . 43 To Start a Roam Request . 44 To Cancel a Roam Request . 44 Site Lock . 45 To Start Site Lock . 45 To Cancel Site Lock . 45 Troubleshooting . 46 Making a Selective Call . 47 Radio Calls
(Trunked Operation Only) . 47 Receiving a Selective Call F . 48 Receiving a Call Alert Page . 49 English 2 6864110R11-OTOC.fm Page 3 Tuesday, November 20, 2001 11:56 AM Radio Check
(LTR Trunked Operation Only) . 49 Editing a Radio Call List K . 50 Name and Call Tone Tagging
(LTR Trunked Operation Only) . 51 To Tag a Specific Users Name . 52 To Tag a Type of Radio Call . 52 Scan . 55 Talkback . 55 PassPort Primary Auto Group Scan . 56 Passport Group Scan G
(PassPort Trunked Operation Only) . 56 When PassPort Group Scan is Enabled . 56 To Start or Stop PassPort Group Scan Operation through a Preprogrammed Button . 57 To Start or Stop PassPort Group Scan Operation through the Menu. 57 Auto Group Scan G
(LTR Trunked Operation Only) . 57 To Start Auto Group Scan . 57 To Stop Auto Group Scan . 58 All Group Scan G
(LTR Trunked Operation Only) . 58 To Start or Stop All Group Scan Operation through the Menu . 58 To Start or Stop All Group Scan Operation through the Menu . 58 System Scan G
(LTR Trunked and Conventional Operation). 59 When System Scan is Enabled . 59 To Start or Stop a System Scan Operation. 59 Deleting a Nuisance Channel/Talkgroup
(PassPort Group Scan or System Scan Operation Only) . 60 To Temporarily Delete the Channel/
Talkgroup . 60 Restoring a Channel/Talkgroup Back to the Scan List. 60 Editing a Scan List
(PassPort Group Scan or System Scan Operation Only) . 60 Adding or Deleting Talkgroups or Channels in a Scan List . 61 Prioritizing a Talkgroup or Channel in a Scan List
(System Scan Operation Only). 62 Phone. 65 Making a Phone Call D Through a Trunked System . 65 C O N T E N T S 3 English 6864110R11-OTOC.fm Page 4 Tuesday, November 20, 2001 11:56 AM S T N E T N O C Making a Phone Call D Through a Conventional System . 66 Receiving a Phone Call D Through a Trunked or Conventional System . 68 Modifying the Phone List K . 69 To Add an Entry. 69 To Delete an Entry. 70 To Edit an Entry. 71 Voice Storage . 73 Incoming Call Recording. 74 Selective Incoming Call Recording . 74 All Incoming Call Recording . 74 Voice Memo Recording . 76 To Record a Voice Memo using the Preprogrammed Record/Playback Button . 76 To Record a Voice Memo using the Menu . 76 Recorded Message Playback. 77 To Play Back a Message using the Preprogrammed Record/Playback Button . 77 To Playback a Message using the Menu . 78 Recorded Message Delete. 78 To Delete a Message using the Preprogrammed Delete Playback Button . 78 To Delete a Message using the Menu . 79 Recorded Message Transmission . 79 To Transmit a Recorded Message . 79 Automatic Message Reply: When Available
(LTR Trunked Operation Only). 80 To Enable the Automatic Message Reply Feature . 80 To Disable the Automatic Message Reply Feature . 81 Audio/Tone Settings . 83 Utilities . 85 Setting Tight or Normal Squelch
(Conventional Operation Only). 88 Setting the Power Level B . 89 Setting the Clock/Alarm . 90 Warranty . 91 Limited Warranty . 91 English 4 6864110R11-OTOC.fm Page 5 Tuesday, November 20, 2001 11:56 AM Accessories . 97 Carry Cases . 97 Chargers . 97 Headsets and Accessories . 98 Microphones . 99 Ear Microphone System . 99 Integrated Microphone/Receiver . 100 Earpiece . 100 Adapters . 101 Batteries . 101 Antennas . 101 Manuals. 101 C O N T E N T S COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. 5 English 6864110R11-OTOC.fm Page 6 Tuesday, November 20, 2001 11:56 AM S T N E T N O C English 6 SAFETY S USER SAFETY, TRAINING, AND GENERAL INFORMATION READ THIS IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION BEFORE USING YOUR MOTOROLA HANDHELD PORTABLE TWO-WAY RADIO The information provided in this document supersedes the general safety information contained in user guides published prior to June 2001. For information regarding radio use in a hazardous atmosphere please refer to the Factory Mutual (FM) Approval Manual Supplement or Instruction Card, which is included with radio models that offer this capability. COMPLIANCE WITH RF ENERGY EXPOSURE STANDARDS Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environment at duty cycles of up to 50% talk-50% listen and should be used for occupational use only. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. Note that the approved, supplied batteries for this radio are rated for a 5-5-90 duty cycle (5% talk-
5% listen - 90% standby), even though this radio complies with the FCC occupational exposure limits at duty cycles of up to 50% talk. Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines:
United States Federal Communications Commission, Code of Federal Regulations;
47CFR part 2 sub-part J
American National Standards Institute
(ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1- 1992 S A F E T Y 7 English Y T E F A S
Institute of Electrical and Electronic Engineers (IEEE) C95.1- 1999 Edition International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999
Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 1999 (applicable to wireless phones only)
ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) additional requirements for SMR, cellular and PCS product certification. To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:
OPERATIONAL INSTRUCTIONS AND TRAINING GUIDELINES MAN WITH R To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit no more than 50% of the time and always adhere to the following procedures:
Transmit and Receive To transmit (talk), push the Push-To-Talk
(PTT) button; to receive, release the PTT button. Hand-held Radio Operation
Hold the radio in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips. Body-worn Operation
Always place the radio in a Motorola approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC RF exposure guidelines. English 8
If you do not use a Motorola approved body-worn accessory and are not using the radio in the intended use position in front of the face, then ensure the antenna and the radio are kept 2.5 cm (one inch) from the body when transmitting. Antenna & Batteries
Use only Motorola approved supplied antenna or Motorola approved replace-
ment antenna. Unauthorized antennas, modifications, or attachments could dam-
age the radio and may violate FCC regula-
tions.
Use only Motorola approved, supplied batteries or Motorola approved replace-
ment batteries. Use of non-Motorola-
approved antennas or batteries may exceed FCC RF expo-sure guidelines. Approved Accessories For a list of approved Motorola accessories see the accessory section of this User Guide. ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY Note: Nearly every electronic device is susceptible to electromagnetic interference
(EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. S A F E T Y 9 English Y T E F A S Medical Devices
Pacemakers The Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with those of the U. S. Food and Drug Administration. Persons with pacemakers should:
ALWAYS keep the radio more than 6 inches (15 centimeters) from their pace-
maker when the radio is turned ON.
not carry the radio in the breast pocket.
use the ear opposite the pacemaker to minimize the potential for interference. turn the radio OFF immediately if you have any reason to suspect that interfer-
ence is taking place.
Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.
Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Driver Safety Check the laws and regulations on the use of radios in the area where you drive. Always obey them. When using your radio while driving, please:
Give full attention to driving and to the road.
Use hands-free operation, if available.
Pull off the road and park before making or answering a call if driving conditions so require. English 10 OPERATIONAL WARNINGS For Vehicles With an Air Bag
!
!
W A R N I N G Do not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Turn off your radio prior to entering any area with a potentially explosive atmosphere, unless it is a radio type especially qualified for use in such areas as Intrinsically Safe (for example, Factory Mutual, CSA, UL, or CENELEC). Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: Turn off two-way radio. Obey all signs and instructions. S A F E T Y 11 English Y T E F A S OPERATIONAL CAUTIONS
!
C a u t i o n Antennas Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/
or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. BATTERY INFORMATION Charging Batteries This product is powered by a nickel-metal-
hydride (NiMH), or lithium-ion rechargeable battery. Charge the battery before use to ensure optimum capacity and performance. The battery was designed specifically to be used with a Motorola charger. Charging in non-
Motorola equipment may lead to battery damage and void the battery warranty. Note: When charging a battery attached to a radio, turn the radio off to ensure a full charge. The battery should be at about 77F (25C)
(room temperature), whenever possible. Charging a cold battery (below 50 F [10C]) may result in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery (above 95F [35C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid-rate battery chargers contain a temperature-
sensing circuit to ensure that batteries are charged within the temperature limits stated above. English 12 INTRODUCTION Welcome to Motorolas HT Series family of radio users. The HT1250LS+, the Intelligent Radio, combines the very latest in two-way technology while delivering outstanding functionality at the touch of a button. The HT1250LS+ portable radio operates on PassPort and LTR trunked and conventional radio systems. TRUNKED RADIO SYSTEMS Trunked systems allow a large number of users to share a relatively small number of frequencies or repeaters without interfering with each other. The airtime of all the repeaters in a trunked system is pooled, which maximizes the amount of airtime available to any one radio and minimizes channel congestion. PassPort Trunked Systems PassPort is an enhanced trunking protocol developed by Trident Micro Systems that supports wide area dispatch networking. A network is formed by linking several trunked sites together to form a single system. This offers users an extended communication coverage area. Additionally, users with PassPort can seamlessly roam among all sites within the network. Seamless roaming means that the radio user does not have to manually change the zones on the radio when roaming from site-to-site. LTR Trunked Systems LTR is a transmission based trunking protocol developed by the E. F. Johnson Company for primarily single site trunking applications. In transmission trunking, a repeater is used for only the duration of a single transmission. Once a transmission is completed, that repeater becomes available to other users. This means that a conversation comprised of many transmissions may occur over several different channels within the LTR system. This method of trunking provides system efficiency I N T R O D U C T O N I 13 English by making repeaters available to all users after every transmission. CONVENTIONAL RADIO SYSTEMS Conventional radio systems typically refers to unit-to-unit communications through a single channel. Conventional systems also allow radio users to extend communication coverage by relaying their messages through a repeater. To ensure coordinated use by multiple talkgroups, each radio user must monitor the channel or repeater before transmitting to verify that the system is not currently busy. HT1250LS+ RADIO FEATURES Note: Throughout this manual there are features listed as trunked and con-
ventional. Trunked indicates the fea-
ture functions in both PassPort and LTR zones unless otherwise noted. Conventional indicates the feature functions in Conventional zones only. HT1250LS+ Portable Feature Highlights:
Radio Wide Features
14-Character Alphanumeric Display 7 Programmable Feature Buttons Up to 15 PassPort and/or LTR Zones with up to 16 Talkgroups per Zone Up to 16 Conventional Channels X-Pand Audio Enhancement Selectable by Conventional Channel, LTR repeater or PassPort Talkgroup Home Channel Revert Telephone Interconnect User-programmable Phone and Scan Lists Voice Storage Capability
PassPort Zone Features
Unique Mobile Identity Number per radio Unique Electronic Serial Number per radio Registration/Deregistration upon power up/
power down Automatic Seamless Roaming Between Networked Sites Registered Site and Mobile Identity View User Initiated Roam Request PassPort Primary Group Auto Scan and Passport Scan PTT ID (Display of Mobile Identification Number)
I N O T C U D O R T N I English 14 PassPort Zone Features (Cont.)
Call Signalling Features
- Call Alert
- Selective Call Site Lock
LTR Zone Features
MDC 1200 Signaling
- Call Alert
- Selective Call
- Radio Check
- Caller ID Auto Group System, All Group Scan System Scan with 2 Priority Levels
Conventional Zone Features
Monitor and Sticky Permanent Monitor
System Scan with 2 priority levels I N T R O D U C T O N I 15 English Notes I N O T C U D O R T N I English 16 RADIO OVERVIEW PARTS OF THE RADIO HT1250LS+ Model Zone Selector Knob On/Off/Volume Knob Side Button 1 (A)
(programmable) Push-to-Talk (PTT) Button Side Button 2 (B)
(programmable) Side Button 3 (C)
(programmable) Top Button (D)
(programmable) LED Indicator Microphone Display Menu Keys
(P1, P2, P3)
(programmable) Keypad I R A D O O V E R V E W I Side Connector Cover 17 English I W E V R E V O O D A R I On/Off/Volume Knob LED Color Indicates Turns the radio on or off, and adjusts the radios volume. Double flashing yellow Group Selective call received
(LTR trunked only) Zone Selector Knob Switches the radio to different LTR trunked and conventional zones. It is also used to scroll through menu choices when in Menu Mode. LED Indicator Indicates battery status (see page 30); or the status of power-up, scan, or receipt of a talkgroup or selective call (see table below):
LED Color Steady red Flashing red Single flashing yellow Indicates Radio is transmitting (PTT button pressed) Radio is attempting to access trunked system (PTT button pressed), or Radio is receiving (PTT button released) Call Light feature, or Individual Selective Call Received (LTR trunked only) Momentary green Radio has powered-up successfully Double flashing green System or All Group Scan operation, PassPort Group Scan Push-to-Talk (PTT) Button Press and hold down this button to talk;
release it to listen. Microphone When sending a message, hold the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth, and speak clearly into the microphone. Menu Keys Exit
(
<
Left Up
+
?
Down Menu/Select u
>
Right English 18 I R A D O O V E R V E W I Menu/Select Key ) Left Key <
Used to enter menu mode. When in menu mode, this key is also used to make menu selections. Exit Key (
Used as a backspace key when editing radio call, scan, and phone lists. This key can also be programmed with a radio feature (see page 22). Used to move to the previous menu level (short press) or to exit menu mode (long press). Keypad Keys Up Key + and Down Key ?
Used to scroll through the preprogrammed talkgroups of a selected trunked zone, or through conventional channels when in conventional zone.
Used for scrolling when in menu mode.
The ? key can also be programmed with a radio feature (see page 22). Right Key >
Moves the cursor right or inserts a space when editing call, scan, and phone lists. This key can also be programmed with a radio feature (see page 22). 1 2 3 4 5 6 7 8 9
* 0 #
These keys are used for:
Dialing a phone number
Entering a specific radio ID number when making a selective call or call alert
Entering information when programming radio call, scan, and phone lists Each key can generate several different characters. For example, to enter the character C, press the 2 key three times. (Refer to the following table.) 19 English I W E V R E V O O D A R I Entering Characters Using the Keypad Number of Times Key is Pressed Key 1 0 0 1 1 2 A 3 D 4 G 5 J 6 M 7 P 8 T 9 W
* *
2
(
&
B E H K N Q U X
/
# #
Blank Space 3
)
%
C F I L O R V Y
+
-
4
<
#
2 3 4 5 6 S 8 Z
-
. 5
>
*
a d g j m 7 t 9
=
!
6 7 8 9 10 11 12 13 14 15 b e h k n p u w
?
c f i l o q v x 2 3 4 5 6 r 8 y s z 7 9 Y y
,
;
:
English 20 I R A D O O V E R V E W I Display
&DOO5HFHLYHG The top two screen rows display menu and radio status information:
Symbol A X-Pand B Power Level C Monitor D Phone Indication The X-Pand feature is activated. When in narrow band, this feature improves audio quality. Low Power R or High Power S is activated. The selected channel is being monitored (conventional operation only). Phone mode is selected. Symbol Indication E Emergency An Emergency Siren is being sounded. F Call Received A Selective Call or Call Alert has been received (LTR trunked operation only). When the green LED is blinking, indicates that the System, PassPort Scan, or All Group Scan feature has been activated. When the green LED is off, indicates that non-prioritized Auto Group Scan has been activated. Indicates activity on a priority 1 talkgroup or channel during System Scan. G Scan
Priority 1 Scan
( flashing) 21 English I W E V R E V O O D A R I Symbol Indication Symbol Indication H Priority 2 Scan
( steady)
When the green LED is on, indicates activity on a priority 2 talkgroup or channel during System Scan.
When the green LED is off, indicates prioritized Auto Group Scan has been activated. U Clock M Signal Strength N PassPort Zone Shows the time (12- or 24-hour). The more bars, the stronger the signal being received by your radio. A PassPort zone has been selected. J Talkaround You are not transmitting through a repeater
(Conventional operation only). A Program list is being edited. Programmable Buttons Several of your radios buttons can be programmed by your dealer as shortcuts to many of the radios features. Programmable buttons include:
The Three Side Buttons (A, B, C) and the Keypad is locked. Top Button (D) The number of bars (04) shown indicates the charge remaining in your battery.
The Three Lower Menu Keys (P1, P2, P3)
(when the radio is not in menu mode) Each button can access up to two features, depending on the type of button press:
K Programming Mode L Keypad Lock P Battery Level English 22
Short Pressquickly pressing and releasing the programmable buttons, or
Long Presspressing and holding the programmable buttons for a period of time
(programmable for 1/2 to 1 1/2 seconds), or
Hold Downpressing and holding down the programmable buttons while checking status or making adjustments. The table on page 24 summarizes the programmable features available and shows the page number where the feature is explained. In the Button column, have your dealer write down the programmable buttons next to the features that have been programmed to them. Use the abbreviations (for example, A for Side Button 1, D for Top Button, etc.) shown in the radio illustration at the front of this manual. Also, where a choice exists, have your dealer indicate whether the button press is short press (SP) or long press (LP). Check with your dealer for a complete list of features your radio supports. I R A D O O V E R V E W I 23 English I W E V R E V O O D A R I Programmable Features Feature Indicator Short Press Long Press Hold Down Page Button Battery Gauge Emergency Siren
(Top button only) Home Channel Revert Keypad Lock Light Monitor Phone Power Level Radio Call LED Color Check the batterys charge status. Initiate Emergency Siren. Cancel Emergency Siren. Directly access your favorite trunked zone and talkgroup or conventional chan-
nel. Toggle keypad between locked and unlocked. Turn on your radio backlight. Exit permanent monitor mode. Directly access Phone mode. Enter permanent monitor mode. Toggle transmit power level between high and low. Directly access radio call menu. E L C D B LED Color Continually monitor channel 30 39 39 66 88 47 This feature is activated by EITHER a short OR a long press, but not both. Conventional operation only. LTR trunked operation only. *PassPort trunked operation only. English 24 I R A D O O V E R V E W I Programmable Features (Continued) Feature Indicator Repeater/
Talkaround J Short Press Long Press Toggle between using a conventional repeater or transmitting directly to another radio. Roam Request* Searching Scan/Delete Nuisance Channel G Site/MIN View*
Speed Dial Squelch Manually initiate PassPort roaming function. Turn PassPort Group, All Group, and System scan on or off. Stop PassPort roaming function. Delete a nuisance channel while scanning. Displays the PassPort site number on which the unit is registered, the home site and units MIN (Mobile Identity Num-
ber). Quickly access speed dial phone list. Toggle squelch level between tight and normal. Site Lock Locked Directly access Home Site Lock or Current Site Lock options. Hold Down Page Button 38 43 60 43 67 88 This feature is activated by EITHER a short OR a long press, but not both. Conventional operation only. LTR trunked operation only. *PassPort trunked operation only. 25 English I W E V R E V O O D A R I Feature Indicator Short Press Long Press Hold Down Page Button Programmable Features (Continued) Voice Storage Record/Playback Voice Storage Playback Exit Voice Storage Playback Delete Volume Set Edit Scan List Playback recorded messages. Record voice memos. Exit Voice Storage Play Back mode. Delete recorded messages. Sound a tone for adjusting your radios volume level. Add, Delete, or prioritize talkgroups or channels. 77 77 78 35 60 This feature is activated by EITHER a short OR a long press, but not both. Conventional operation only. LTR trunked operation only. *PassPort trunked operation only. English 26 AUDIO INDICATORS FOR PROGRAMMABLE BUTTONS In addition to having visual indicators, some programmable buttons use tones to indicate one of two modes:
High-Low Tone Low-High Tone Button High-Low Tone Low-High Tone Scan Stop scan Start scan Power Level Squelch (no visual indicator) Keypad Lock Repeater/
Talkaround High power selected Low power selected Normal squelch Tight squelch Unlocked Uses conventional repeater Locked Does not use conventional repeater I R A D O O V E R V E W I 27 English Notes I W E V R E V O O D A R I English 28
]
GETTING STARTED BATTERY INFORMATION Charging the Battery If a battery is new or its charge level is very low, you need to charge it before you can use it. Note: Batteries are shipped uncharged from the factory. Always charge a new battery 14 to 16 hours before initial use, regardless of the status indicated by the charger. To charge the battery:
Place the battery, with or without the radio, in the charger. The charger LED indicates the charging progress:
LED Color Battery/Charger Status No LED Indication Battery inserted incorrectly. Single Green Flash Successful charger power-up. Flashing Red*
Battery unchargeable or not making proper contact. Steady Red Battery in rapid-charge mode. Flashing Yellow Battery in charger, not in rapid-
charge mode but waiting to be charged. Flashing Green Battery 90% (or more) charged. Steady Green Battery fully charged.
* Remove the battery from the charger. Clean bat-
tery contacts with isopropyl alcohol applied to a soft cloth. Place the battery back in the charger. If the LED indicator continues to flash red, replace the battery. A standard battery may require one hour to charge to 90%. I G E T T N G S T A R T E D 29 English Battery Charge Status You can check your batterys charge status in two ways:
The charge status is shown by the P status indicator symbol on the display. This does not require any action by you; the symbol is shown automatically.
Hold down the preprogrammed Battery LED Indicator button (see page 22). The charge status is shown by the color of the radios LED indicator. Battery Level LED Status Indicator Indicator P High Green P Sufficient Yellow or Low Flashing red Very Low None
(flashing) Battery charges will only charge the Motorola-
authorized batteries listed below; other batteries may not charge. Part No. HNN9008 Description 1200 mAH NiMH High Capacity Battery (standard) HNN9009 1900 mAH NiMH Ultra High Capac-
ity Battery HNN9010 1850 mAH NiMH, Ultra High Capac-
ity - Factory Mutual HNN9011 1200 mAH Ni-Cad, High Capacity Battery - Factory Mutual HNN9012 1350 mAH Ni-Cad High Capacity Battery HNN9013 1200 mAH Lithium Ion Battery D E T R A T S G N T T E G I English 30 Attaching the Battery 2 1 Battery Latches 2 3 1 Fit the extensions at the bottom of the battery into the bottom slots on the radio. 2 Press the top part of the battery toward the radio until you hear a click. Removing the Battery 1 Turn off the radio (see page 34). 2 Slide both battery latches downward. 3 Pull the top part of the battery away from the radio. ACCESSORY INFORMATION Attaching the Antenna I G E T T N G S T A R T E D 31 English D E T R A T S G N T T E G I 1 Turn the antenna clockwise to attach it. 1 Turn the antenna clockwise to remove it. Removing the Antenna English 32 Attaching the Belt Clip Removing the Belt Clip Belt Clip Tab 1 2 I G E T T N G S T A R T E D 1 Align the grooves of the belt clip with those of 1 Use a key to press the belt clip tab away from the battery. the battery. 2 Press the belt clip downward until you hear a 2 Slide the belt clip upward to remove it. click. 33 English D E T R A T S G N T T E G I Attaching the Side Connector Cover TURNING THE RADIO ON OR OFF Antenna Loop Slot Thumbscrew 1 Place the loop (attached to the side connector cover) over the antenna; then slide it downward until it touches the top of the radio. 2 Insert the tab on the top of the cover into the slot above the connector. 3 Position the cover over the connector and align the thumbscrew with the threaded hole in the radio. 4 Tighten the thumbscrew to hold the cover in place. Do not overtighten the thumbscrew. ON OFF Turn the On/Off/
Volume knob coun-
terclockwise until you hear a click. Turn the On/Off/
Volume knob clock-
wise. If power-up is suc-
cessful, you hear the Self-Test Pass Tone and see the LED momentarily turn green. If the radio fails to power up, you hear the Self-Test Fail Tone
. English 34 ADJUSTING THE VOLUME Turn the On-Off/Volume Control knob clockwise to increase the volume or counterclockwise to decrease the volume. or 1 Hold down the Volume Set button (see this page); you hear a continuous tone. 2 Turn the On-Off/Volume Control knob to the desired volume level. 3 Release the Volume Set button. Up to 15 PassPort and/or LTR trunked zones
(containing 16 talkgroups each) can be programmed into your radio. To select a trunked zone and talkgroup:
1 Use the Zone Selector knob to select the appropriate trunked Zone. 2 + or ? until you see the desired prepro-
grammed talkgroup on the display Note: N (the PassPort Zone symbol) appears when a PassPort Zone has been selected. SELECTING A TRUNKED ZONE AND TALKGROUP Note: Throughout this manual there are features listed as trunked and conventional. Trunked indicates the feature functions in both PassPort and LTR zones unless otherwise noted. Conventional indicates the feature functions in Conventional zones only. I G E T T N G S T A R T E D 35 English 3 With the PTT button depressed, speak clearly into the microphone. 4 Release the PTT button to listen. SENDING A TRUNKED CALL To send a trunked call:
1 Hold the radio in a vertical position at a distance of about 1 to 2 inches (2.5 to 5 cm) from your mouth. 2 Press and hold the PTT button. or Press and release the PTT button and wait 3 seconds.
If access to the trunked system was successful, the LED indicator lights steady red.
-
In addition, your dealer can program your radio to sound a short, high-
pitched (talk permit) tone, indicating successful trunked system access. If access to the trunked system was unsuccessful, the LED indicator flashes red and a low-pitched (talk prohibit) tone sounds, indicating that the system was busy or out-of-range. D E T R A T S G N T T E G I English 36 SELECTING A CONVENTIONAL ZONE AND CHANNEL 1 Use the Zone Selector knob to select the appropriate conventional zone. 2 + or ? until you see the desired conventional channel on the display. 2 Press the PTT button and speak clearly into the microphone. The LED indicator lights steady red while the call is being sent. 3 Release the PTT button to listen. RECEIVING A TRUNKED OR CONVENTIONAL CALL SENDING A CONVENTIONAL CALL 1 Turn your radio on. Note: In the United States, FCC regulations require you to monitor the conventional channels before sending a call. The monitor feature (see page 22) can be accessed through one of your programmable buttons. 1 Hold the radio in a vertical position at a distance of about 1 to 2 inches (2.5 to 5 cm) from your mouth. 2 Adjust your radios volume (see page 35). 3 Use the Zone Selector knob to select the desired trunked or conventional zone.
Make sure the PTT button is released. 4 Listen for voice activity. The LED indicator flashes red when your radio is receiving. Note:
;;;;
In PassPort mode, the Mobile Identity Number (XXXX) of the calling radio appears on the display if enabled. I G E T T N G S T A R T E D 37 English D E T R A T S G N T T E G I REPEATER OR TALKAROUND J MODE
(CONVENTIONAL OPERATION ONLY) Talkaround mode enables you to communicate with another radio when either:
The repeater is not operating or
Your radio is out of the repeaters range but within communicating distance of another radio. Note: The J symbol appears on the display when talkaround mode is selected. To Select Repeater Mode or Talkaround Mode Press the preprogrammed Repeater/
Talkaround button (see page 22) to toggle between repeater mode and talkaround mode. or 1 ) to enter menu mode. 2 + or ? until 5SWU7DONDUQ 3 ) to select 5SWU7DONDUQG 4 + or ? until 5SWU7DONDUQG or until 7DONDUQG0RGH 5 ) to confirm your selection. CALL LIGHT
(TRUNKED OPERATION ONLY) The Call Light indicator informs you that you have received a call from a specified talkgroup
(as programmed by your dealer). The yellow LED indicator will flash continuously, indicating that a trunked call has been received. To Turn the Call Light Off
Press the PTT button.
Select another trunked or conventional zone.
Press any preprogrammed button.
Turn the radio off, then on again. HOME CHANNEL REVERT The Home Channel Revert feature allows you to instantly access your favorite trunked English 38 talkgroup or conventional channel at the touch of a button. To Activate Home Channel Revert Press the preprogrammed Home Channel Revert button (see page 26). SOUNDING AN EMERGENCY SIREN In the event of an emergency, you may need to quickly get the attention of others for help. The Emergency Siren feature (if programmed by your dealer) causes your radio to emit a continuous, high-pitched tone. Note: The Esymbol appears on the display when the Emergency Siren has been activated. To Start the Emergency Siren Press the preprogrammed Emergency Siren button (see page 26). To Stop the Emergency Siren Press the Emergency Siren button again or press the PTT button. I G E T T N G S T A R T E D 39 English Notes D E T R A T S G N T T E G I English 40 PASSPORT TRUNKING you with optimal audio quality throughout your communications. PassPort is an enhanced, wide-area trunking protocol developed by Trident Micro Systems. Up to 128 trunked sites can be linked together to form one PassPort system, which means that your communications can extend far beyond the reach of a single trunked site. SEAMLESS ROAMING Passport Trunking systems offer you the ability to seamlessly roam among all sites in a network. Seamless Roaming means that you do not have to manually change the zones on the radio when roaming from site-to-site. As you roam throughout a Passport Systems coverage area, your HT1250LS+ radio is regularly monitoring the RSSI (Received Signal Strength Indication) level of the site on which you are currently registered. In addition, if the signal strength falls below the acceptable threshold pre-programmed by your dealer, your radio starts monitoring the RSSI level of adjacent sites within the network. This allows the HT1250LS+ radio to quickly roam to the site with the strongest signal, which provides Initial Registration Before communications with your talkgroup can begin, your radio needs to register on the PassPort system. Registration automatically takes place upon radio power up or after selecting the desired PassPort zone on the selector knob. What you see:
3DVV3RUW 1 Upon radio Power up, you see:
(if you select a PassPort zone after the radio is powered up, see step 2). 2 The selected PassPort zone alias appears on the dis-
play. 3 The selected Talk-
group Alias appears on the display. T R U N K N G P A S S P O R T I 41 English 6($5&+,1*
Note: If the radio per-
forms a more exten-
sive frequency search in order to attempt successful registration, you may see:
4 Upon successful PassPort Registra-
tion, you see:
5(*6,7(;;;
Note: Your radio sounds a Low-High tone upon successful PassPort System registra-
tion. The ;;; number indicates the site within the PassPort system on which you have regis-
tered. Roaming and Registering Between Sites Once initial registration with the PassPort system has occurred, your radio constantly monitors the RSSI to ensure an acceptable signal level is maintained (as programmed by your dealer). When the RSSI in the radio falls below this acceptable level, the HT1250LS+
attempts to roam to and register onto another site within the PassPort system. This process happens automatically and requires no action by you. What you see:
1 When the radio is searching for a new site or attempting successful registra-
tion to a site, you see:
6($5&+,1*
5 After successfully registering at a site, the selected Pass-
Port talkgroup alias appears and remains on the display.
<2857/.*53$/,$6 cessful registration. Note: This message is displayed until suc-
2 When the radio has successfully regis-
tered to the new PassPort System, XXX indicates the site number you see:
5(*6,7(;;;
I T R O P S S A P G N K N U R T English 42 3 The selected Pass-
Port talkgroup alias appears and remains on the display. 7/.*53$/,$6 SITE/MIN VIEW There may be circumstances when you want to view the number of the PassPort site on which you are registered as well as your Mobile Identity Number (MIN). To Start and Stop Viewing Site/MIN 1 Press the preprogrammed SITE/MIN View button (see page 22). The display shows the number of the site on which you are cur-
rently registered. VLWHQRZ;;;
VLWHQRZQD Note: If the prepro-
grammed button is activated prior to or during registration, a bad key chirp is sounded and you see:
The display indicates the Home site num-
ber (ASID) and Mobile Identity Number. XXX indicates the ASID, YYYYY indicates the MIN.
,$0;;;-<<<<<
Note:
This message can be activated if the radio is not registered. ROAM REQUEST Because of the RSSI feature, the HT1250LS+
radio automatically roams to a different site when the signal from the registered site becomes too weak for quality communication. This RSSI threshold is programmed by your dealer. However, if you believe the signal strength would be better on another site, you may want to manually initiate the roaming process. This feature is called Roam Request. T R U N K N G P A S S P O R T I 43 English To Start a Roam Request 1 Press the preprogrammed Roam Request button (see page 22). 2 When the radio is searching for a new site or attempting successful registra-
tion to a site, you see:
3 When the radio has successfully regis-
tered to the new PassPort System, you see:
Note: A bad key chirp may sound and you see:
6($5&+,1*
5(*6,7(;;;
5RDP1RW$YDLO
When registration to a site with a higher RSSI than your current site is unavailable.
When the preprogrammed button is pressed before the radio has collected its neighbor list. A Neighborlist is a list of frequencies from adjoining sites within the PassPort system that are used during the roam pro-
cess.
When the radio is programmed for a single home system. In these cases, wait a few seconds and try again. 4 The selected Pass-
Port talkgroup alias appears and remains on the display:
7/.*53$/,$6 To Cancel a Roam Request 1 Press and hold the preprogrammed Roam Request button (see page 25) again. You see
&QFO5RDP5HT I T R O P S S A P G N K N U R T English 44 Note: The radio then attempts to return to 3 Press the preprogrammed Site Lock button the previously registered site. again to make your selection. SITE LOCK Because of the RSSI (Received Signal Strength Indication) feature, the HT1250LS+
radio automatically roams to a different site when the signal falls below the RSSI level programmed in your radio by your dealer. In some instances (inside a building or in fringe areas), you may want to prevent your radio from roaming. This is possible by enabling the Site Lock functions. To Start Site Lock 1 Press the preprogrammed Site Lock button Note:
If Home Site Lock is selected, your radio reverts and locks onto your home site. If Current Site Lock is selected, your radio reverts and locks onto the site that currently has the strongest RSSI level. 4 The site name and number appear on the dis-
play. You see:
or 6LWH1DPH 1R
/RFNHG
(see page 25). You see:
+RPH6LWH/RFN To Cancel Site Lock 2 + or ? until
+RPH6LWH/RFN or
&XUUHQW6LWH/RFN Turn off your radio or change zones/talkgroups to cancel the Site Lock feature. Your radio automatically re-registeres on the PassPort system. T R U N K N G P A S S P O R T I 45 English TROUBLESHOOTING While in PassPort zones, there are some specific display messages that indicate you should contact your dealer for assistance. Message What it Means Invalid Group ID Your dealer needs to verify talk-
group programming in your radio or the PassPort system. Your radio requires reactivation on the PassPort system (not applicable to conventional and LTR functionality). Your radio needs to be returned to your dealer for reactivation or service. DISABLED Blank display upon power up with a full charged battery. I T R O P S S A P G N K N U R T English 46 I O P E R A T O N O N L Y
)
(
T R U N K E D I R A D O C A L L S RADIO CALLS
(TRUNKED OPERATION ONLY) MAKING A SELECTIVE CALL You can make a selective call to a particular radio or group or radios, as programmed by your dealer. To Make a Selective Call Press the preprogrammed Radio Call button
(see page 24), and proceed to step 4. or 1 ) to enter menu mode. 2 + or ? until 3 ) to select 5DGLR&DOO 5DGLR&DOO 6 + or ? to locate the desired ID in the Radio Call List. or Enter the ID number of the radio you want to call. (Full keypad model only.) 7 Press the PTT button to send the call. The radio sounds a continuous tone, if pro-
grammed by your dealer.
The LED lights a solid yellow. 8 Press the PTT button and talk; release the PTT button to listen. If not received, you see:
1R$FNQRZOHGJH 9 ( to return to or 6HOHFWLYH&DOO 4 + or ? until 6HOHFWLYH&DOO Hold down ( to exit menu mode. 5 ) to select 6HOHFWLYH&DOO 47 English S L L A C O D A R I D E K N U R T
(
) Y L N O N O T A R E P O I RECEIVING A SELECTIVE CALL F When you Receive a Selective Call
The display shows F the preprogrammed name or ID of the calling radio.
The LED indicator flashes yellow, if pro-
grammed by your dealer.
You hear an alert tone. To answer the call, press the PTT button. Note:
In LTR trunked mode, unless you make a Selective Call back to the caller, your response is heard by all members of your talkgroup. SENDING A CALL ALERT PAGE You can alert another person by sending a Call Alert page. To Send a Call Alert Page Press the preprogrammed Radio Call button
(see page 26) and proceed to step 4:
1 ) to enter menu mode. 2 + or ? until 5DGLR&DOO 3 ) to select 4 + or ? until 5 ) to select 5DGLR&DOO
&DOO$OHUW
&DOO$OHUW 6 + or ? to locate the desired ID in the Radio Call List. or Enter the ID number of the radio you want to page. 7 Press the PTT button. You see:
&DOO,Q3URJ and the preprogrammed name or ID alternat-
ing on the display.
The LED alternates between a solid yellow and solid red while the call is in process. English 48 I O P E R A T O N O N L Y
)
(
T R U N K E D I R A D O C A L L S 8 If the Call Alert page is received by the target radio, you see:
$FNQRZOHGJH If not received, you see:
1R$FNQRZOHGJH
The radio sounds a short alert tone if, pro-
grammed by your dealer. 9 ( to return to or
&DOO$OHUW Hold down ( to exit menu mode. RECEIVING A CALL ALERT PAGE When you Receive a Call Alert Page
The display shows F &DOO5HFHLYHG and the preprogrammed name or ID of the call-
ing radio.
You hear four alert tones, either once or continuously, as programmed by your dealer.
The LED indicator flashes a single yellow for a group call, or flashes a double yellow for an individual call. To answer the page, press the PTT button; to cancel the page, press any other key. Note:
Your radio displays only the last Call Alert page received. Also, your radio does not receive any Selective Calls until you clear the page. RADIO CHECK
(LTR TRUNKED OPERATION ONLY) Radio Check allows you to determine if a radio is within the range of the trunked system and turned on, without disturbing the user of that radio. This feature can also be used when attempts with Selective Call and Call Alert fail. 49 English S L L A C O D A R I D E K N U R T
(
) Y L N O N O T A R E P O I To Perform a Radio Check 1 ) to enter menu mode. 2 + or ? until 5DGLR&DOO 3 ) to select 5DGLR&DOO 8 If the Radio Check is received by the target radio, you see:
$FNQRZOHGJH If not received, you see:
1R$FNQRZOHGJH 4 + or ? until 5DGLR&KHFN 9 ( to return to 5 ) to select 5DGLR&KHFN 6 + or ? to locate the desired ID in the Radio Call list or Enter the ID number of the radio you are checking. 7 Press the PTT button. You see:
&DOO,Q3URJ or 5DGLR&DOO Hold down ( to exit menu mode. EDITING A RADIO CALL LIST K Your radio has a Radio Call list that contains the names and radio IDs of several talkgroups or individuals. The ID numbers in the Radio Call List are programmed by your dealer, and cannot be changed from your radio. However, you can edit the names associated with these IDs. The K symbol appears on the display when you are editing. English 50 Note:
The radio cannot receive any calls while you are editing. 9 ) to select the entry. To Edit a Call List Entry 1 ) to enter menu mode. 2 + or ? until 3 ) to select 4 + or ? until 10 Use your keypad to edit the entry (page 19). 11 ) to save your changes.
(GLW(QWU\"
3URJUDP/LVWV
12 ( to return to
(GLW(QWU\"
3URJUDP/LVWV
or Hold down ( to exit menu mode. I O P E R A T O N O N L Y
)
(
T R U N K E D I R A D O C A L L S 5DGLR&DOO/LVW 5 ) to select 5DGLR&DOO/LVW 6 + or ? until
(GLW(QWU\"
7 ) to select
(GLW(QWU\"
8 + or ? until you locate the desired entry. NAME AND CALL TONE TAGGING
(LTR TRUNKED OPERATION ONLY) You can program your radio to sound a particular alert tone when a specific user is calling (name tone tagging), or when receiving a particular type of radio call (call tone tagging). Note:
Name and call tone tagging are valid only for selective calls and call alerts. There are seven alert tones to select from.
(See table, page page 84.) 51 English S L L A C O D A R I D E K N U R T
(
) Y L N O N O T A R E P O I To Tag a Specific Users Name 1 ) to enter menu mode. 2 + or ? until 3 ) to select 4 + or ? until 5 ) to select
$XGLR7RQHV
$XGLR7RQHV 1DPH7RQH7DJ or Hold down ( to exit menu mode. To Tag a Type of Radio Call 1 ) to enter menu mode. 2 + or ? until
$XGLR7RQHV 3 ) to select
$XGLR7RQHV 1DPH7RQH7DJ 4 + or ? until
&DOO7RQH7DJ 6 + or ? until you see the name you want to tag. 5 ) to select
&DOO7RQH7DJ 7 ) to confirm the selection. 6 + or ? until you see the call type you 8 + or ? until you see and hear the tone you want to use for this name. 7 ) to confirm the selection. want to tag. 9 ) to confirm the selection. You see:
1DPH7DJ6HW 10 ( to return to 1DPH7RQH7DJ 8 + or ? until you see and hear the tone you want to use for this type of call. 9 ) to confirm the selection. English 52 You see:
&DOO7RQH6HW 10 ( to return to or
&DOO7RQH7DJ Hold down ( to exit menu mode. I O P E R A T O N O N L Y
(
T R U N K E D I R A D O C A L L S
) 53 English
) Notes S L L A C O D A R I D E K N U R T
(
Y L N O N O T A R E P O I English 54
| 1 | User Manual Part 2 | Users Manual | 1.24 MiB | May 03 2002 |
SCAN Your radio is equipped with the Scan feature, which allows you to search for, lock onto, and monitor voice activity on trunked talkgroups and conventional channels. There are five types of Scan available in your radio:
Auto Group Scan All Group Scan PassPort Primary Auto Scan Passport Group Scan System Scan
The table below summarizes the Scan types available in each zone type. PassPort Primary Auto Scan Pass-
Port Group Scan LTR Auto Group Scan LTR All Group Scan System Scan X X X X X Zone PassPort Trunked LTR Trunked PassPort Primary Auto Scan Pass-
Port Group Scan LTR Auto Group Scan LTR All Group Scan System Scan X Zone Conven-
tional Shaded areas indicate that Scan can be enabled through a programmable button (see page 22) or through your radio menu. TALKBACK When activity is detected during any type of scan, scanning stops and the active talkgroup or channel appears and remains on the display until scanning resumes. Your dealer can program the amount of time you can respond
(or TALKBACK) to the caller before your radio resumes scanning. You must press the PTT button to participate in the call; otherwise, scanning continues to the other talkgroups or channels. S C A N 55 English N A C S PASSPORT PRIMARY AUTO GROUP SCAN PassPort Primary Auto Group Scan automatically scans the primary (first) talkgroup within the selected PassPort zone. Any time you are positioned on a PassPort talkgroup other than the first one, your radio automatically scans activity on the first talkgroup within that zone. Note:
This feature is enabled AUTOMATICALLY with your radio. It is not enabled through the radio menu or through a prepro-
grammed scan button. PASSPORT GROUP SCAN G
(PASSPORT TRUNKED OPERATION ONLY) PassPort Group Scan scans talkgroups within the selected Passport trunked zone, as programmed by your dealer. Up to 16 different talkgroups can be programmed into each Scan list, with one Scan list assigned to each position on the Zone Selector knob. You can edit these Scan lists through your radios menu (see page 60). When PassPort Group Scan is Enabled
The G symbol appears on the display.
The LED indicator blinks green during PassPort Group Scan operation; it stops blinking when the radio switches to an active talkgroup or channel. Note:
PassPort Group Scan is not available when registered on a non-home site. If you switch to another PassPort zone, LTR, or conventional zone while the radio is scan-
ning, scanning resumes upon return to the PassPort zone where PassPort Group Scan was enabled. If the radio is turned off while scanning, the radio resumes scanning when you turn it back on. If the radio registers on a non-home site, scanning is not enabled until the radio regis-
ters at its home site. English 56 To Start or Stop PassPort Group Scan Operation through a Preprogrammed Button (see page 22)
Press the preprogrammed Scan button to start PassPort Group Scan.
Press the preprogrammed Scan button again to stop the PassPort Group Scan. or To Start or Stop PassPort Group Scan Operation through the Menu 1 ) to enter menu mode. 2 + or ? until 3DVV*US6FDQ 3 ) to select 3DVV*US6FDQ You see the current scan status. 4 + or ? until or 3S*S6FDQ2II"
3S*S6FDQ2Q"
5 ) to confirm your selection. AUTO GROUP SCAN G
(LTR TRUNKED OPERATION ONLY) Auto Group Scan automatically scans talkgroups within an LTR trunked zone as programmed by your dealer. Auto Group Scan can be either non-prioritized or prioritized.
Non-prioritized Auto Group Scan automatically scans all talkgroups programmed with Auto Group Scan. Prioritized Auto Group Scan automatically scans the selected talkgroup and all lower 4-numbered talkgroups. For example, if talkgroups 1, 3, and 4 have been programmed by your dealer with Auto Group Scan and talkgroup 4 is selected, the radio automatically scans talkgroups 1, 3, and 4, and skips talkgroup 2. To Start Auto Group Scan Select a talkgroup that has been programmed for Auto Group Scan by your dealer. Note:
You do not need to press a preprogrammed Scan button. S C A N 57 English
The G symbol appears on the display when non-prioritized Auto Group Scan has been activated. The H symbol appears on the display when prioritized Auto Group Scan has been activated. There is no LED indicator during Auto Group Scan. To Stop Auto Group Scan Select a talkgroup that has not been programmed for Auto Group Scan by your dealer. ALL GROUP SCAN G
(LTR TRUNKED OPERATION ONLY) All Group Scan scans all talkgroups within the selected LTR trunked zone. When All Group Scan is enabled:
The G symbol appears on the display. The LED indicator blinks green during All Group Scan operation; it stops blinking when the radio switches to an active talk-
group.
58 Note:
If you enter menu mode while the radio is scanning, scanning stops. It resumes when you exit menu mode. To Start or Stop All Group Scan Operation through the Menu (see page 22)
Press the preprogrammed All Group Scan button once to start All Group Scan.
Press the preprogrammed All Group Scan button again to stop All Group Scan. or To Start or Stop All Group Scan Operation through the Menu 1 ) to enter menu mode. 2 + or ? until
$OO*URXS6FDQ 3 ) to select
$OO*URXS6FDQ You see the current scan status. 4 + or ? until
$OO*URXS2Q"
or
$OO*URXS2II"
5 ) to confirm your selection. N A C S English SYSTEM SCAN G
(LTR TRUNKED AND CONVENTIONAL OPERATION) System Scan scans trunked talkgroups and conventional channels between LTR and conventional zones, as programmed by your dealer. Up to 16 different talkgroups or conventional channels can be programmed into each Scan list. You can edit these lists through your radios menu (see page 60). When System Scan is Enabled
The G symbol appears on the display.
The LED indicator blinks green during Sys-
tem Scan operation; it stops blinking when the radio switches to an active talkgroup or channel. Note:
If you enter menu mode while the radio is scanning, scanning stops. It resumes when you exit menu mode. To Start or Stop a System Scan Operation Press the preprogrammed Scan button (see page 23) to start or stop scanning, or Do the following:
1 ) to enter menu mode. 2 + or ? until 6\VWHP6FDQ 3 ) to select 6\VWHP6FDQ You see the current scan status. 4 + or ? until 6\V6FDQ2Q"
or 6\V6FDQ2II"
5 ) to confirm your selection. Note:
In conventional zones only, if there is activity on a non-priority channel, the radio disconnects the user from the current conversation and automati-
cally switches to an active priority channel. This is indicated with a short alert tone. S C A N 59 English N A C S DELETING A NUISANCE CHANNEL/
TALKGROUP
(PASSPORT GROUP SCAN OR SYSTEM SCAN OPERATION ONLY) If a talkgroup or channel continually generates unwanted calls (a nuisance channel), use the preprogrammed Scan button to temporarily delete the talkgroup or channel from the Scan list. To Temporarily Delete the Channel/
Talkgroup 1 While the radios receiving activity is on the nuisance channel, press and hold the Scan button until you hear a high-pitched tone (valid key press). 2 Release the Scan button. The nuisance channel has been temporarily deleted from your Scan list. Note:
In PassPort mode, you cannot delete a priority channel/talkgroup (see page 62), or the currently selected talkgroup in a Scan list. Restoring a Channel/Talkgroup Back to the Scan List To restore a previously deleted talkgroup or channel back to the Scan list, restart the scan operation or turn your radio off and on again. Note:
In PassPort mode, the talkgroup can also be restored by scrolling through the list, or switching the current selected talkgroup or zone. EDITING A SCAN LIST
(PASSPORT GROUP SCAN OR SYSTEM SCAN OPERATION ONLY) One Scan list is assigned to each of the 16 positions on the Zone Selector knob. Each Scan list can contain up to 16 talkgroups and/
or channels. The same talkgroup or channel can be included in several Scan lists, and the same Scan list can be assigned to several Zone Selector positions. When you edit a Scan list, you can either add, delete, or prioritize talkgroups or channels. English 60 Note:
In PassPort mode, talkgroups cannot be pri-
oritized. Your radio cannot receive any calls while you are editing a Scan list. The K symbol is displayed while you are in edit mode. Note:
In Conventional operation only, even if there is activity on a non-priority channel, your radio automatically switches to an active priority channel and indicates the activity with a short tone. ADDING OR DELETING TALKGROUPS OR CHANNELS IN A SCAN LIST 1 ) to enter menu mode. 2 + or ? until 3URJUDP/LVWV Note: One Scan list per mode of operation is available. 5 ) to select 6FDQ/LVW 6 + or ? until
$GG(QWU\"
or until
'HOHWH(QWU\"
7 ) to confirm your selection. 8 + or ? until you see the talkgroup or channel you want to add or delete. Note: You cannot delete the Primary talk-
group off a Scan List in PassPort mode. 9 ) to confirm your selection. 3 ) to select 3URJUDP/LVWV 10 If you added a talkgroup or channel, 4 + or ? until 6FDQ/LVW you see or next page
(QWU\6DYHG S C A N 61 English If you delete a talkgroup or channel, You see:
'HOHWH"
) to confirm the deletion. You see:
(QWU\'HOHWHG 11 ( to return to
$GG(QWU\"
to return to or
'HOHWH(QWU\"
Hold down t to exit menu mode. PRIORITIZING A TALKGROUP OR CHANNEL IN A SCAN LIST
(SYSTEM SCAN OPERATION ONLY) You may want to check the activity on one or two talkgroups or channels more frequently than others. You can do this by prioritizing them:
Priority Channel Scanning Sequence None specified Ch1Ch2Ch3 Ch4Ch1 Channel 2
(Priority 1) Ch2Ch1Ch2Ch3 Ch2Ch4Ch2Ch1 Channel 2
(Priority 1) and Channel 8
(Priority 2) Ch2Ch1Ch8Ch3 Ch2Ch4Ch8Ch1 Note:
In Conventional operation only, even if there is activity on a non-priority channel, your radio automatically switches to an active priority channel and indicates the activity with a short tone. N A C S English 62 Setting Priority Talkgroups or Channels 1 ) to enter menu mode. or until 3ULRULW\"
2 + or ? until 3URJUDP/LVWV You see the current priority talkgroup or chan-
nel. 3 ) to select 3URJUDP/LVWV 4 + or ? until 5 ) to select 6FDQ/LVW 6FDQ/LVW 6 + or ? until
(GLW3ULRULW\"
7 ) to select
(GLW3ULRULW\"
8 + or ? until 3ULRULW\"
9 ) to select the desired priority level. 10 + or ? until you see the talkgroup or channel you want to prioritize. 11 ) to prioritize that talkgroup or channel. 12 ( to return to or
(GLW3ULRULW\"
Hold down ( to exit menu mode. Note:
You cannot reprioritize a priority 1 talk-
group or channel to priority 2. S C A N 63 English Notes N A C S English 64 PHONE Your radio allows you to place and receive telephone calls through trunked and conventional systems (depending on phone line availability). Telephone calls through a repeater allow only one person to speak at a time. MAKING A PHONE CALL D THROUGH A TRUNKED SYSTEM Note: The following instructions assume your radio has been programmed as follows by your dealer using CPS (Customer Program-
ming Software). Dial type: Live
Access/Deaccess type: Immediate Auto
Tone Span: Timed - 100 ms tone duration To Initiate a Phone Call Do the following:
1 Select a trunked zone and talkgroup that have been programmed for telephone. 2 ) to enter menu mode. or Press the preprogrammed Phone button, and skip to step 5. or Press and release the Speed Dial button to use the speed dial feature. Then press the (1 to 9) key corresponding to the number you want to call on the Phone list. Or press 0 if you want to call the last number dialed. Press the PTT button. A dial tone sounds. Press the PTT button again to send the phone number. or For an LTR trunked system, press and hold the PTT button while dialing a number. (If your radio has been programmed for Hot keypad, this is a radio-wide setting). 3 + or ? until 4 ) to confirm 3KRQH 3KRQH D appears on the display when you are in Phone mode. P H O N E 65 English 5 Press and Release the PTT button.
If phone access is successful, a dial tone sounds. If phone access is unsuccessful, a low-
pitched alternating tone sounds. Discon-
nect the call (see step 8) and try again. 6 Enter the phone number with the keypad. The number is automatically sent without pressing the PTT button again. or MAKING A PHONE CALL D THROUGH A CONVENTIONAL SYSTEM To Initiate a Phone Call Press the preprogrammed Phone button, and skip to step 5. or Press the PTT button, and if the Hot keypad feature has been programmed by your dealer, do the following:
+ or ? to select a number from the phone list.
;;;-;;;-;;;;
1 Select a conventional zone and channel that have been programmed for telephone. Press and release the PTT button again to send the number. 7 Hold the radio in a vertical position with the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth. Press the PTT button to talk;
release it to listen. 2 ) to enter menu mode. 3 + or ? until 4 ) to select 3KRQH 3KRQH D appears on the display when you are in Phone Mode. To disconnect the phone call:
Press and hold ( to exit Phone. D no longer appears on the display. 8 66 E N O H P English 5
(For conventional operation with auto access only). You hear a series of tones, indicating that an access code is being sent automati-
cally, and see your access code:
or Enter your access code using the keypad. 7 a Press and release the preprogrammed Speed Dial button (see step 6) to use the Speed Dial feature. b Press the key (1 to 9) corresponding to the number you want to call, or press 0 if you want to call the last number dialed. 6 When you hear a dial tone:
Note:
Enter the phone num-
ber using the keypad.
;;;-;;;-;;;;
or
+ or ? to select a number from the phone list. or (see step 7)
;;;-;;;-;;;;
To redial the last number dialed (if not using Speed Dial), press and release the PTT button immediately after the access code is sent. The radio sends the last number dialed. or If you entered your access code using the keypad, press the ? key once to access the last number dialed; then press and release the PTT button. 8 Press and release the PTT button, if required for your radio. 9 Hold the radio in a vertical position with the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth. Press the PTT button to talk;
release it to listen. P H O N E 67 English 10 To disconnect a phone call, do one of the following:
Enter the deaccess code using the keypad. or If your radio has the deaccess code programmed, go to step 9. 11 To exit Phone Mode:
Press and hold # to disconnect the call. D disappears from the display. E N O H P English 68 RECEIVING A PHONE CALL D THROUGH A TRUNKED OR CONVENTIONAL SYSTEM To Receive a Phone Call 1 + or ? to select an LTR trunked talk-
group or conventional channel that has been programmed for telephone. or Activate any scan type containing a telephone talkgroup or channel (see page 57). Note:
No PassPort talkgroup or zone selection is needed in PassPort mode.
When a phone call is received, a ringing tone sounds, alerting you to answer the phone call. Note:
The D also appears on the display in PassPort mode. 2 Press the PTT button to answer the phone call. Press the PTT button to talk; release it to listen. 3 To disconnect the phone call and exit Phone 2 + or ? until and menu mode:
Press and hold to disconnect the call. Note:
D no longer appears on the display in PassPort mode. MODIFYING THE PHONE LIST K Your radio contains a Phone list that holds up to 25 phone numbers. The Phone list is shared between trunked and conventional Phone operation. You can modify the Phone list in three ways through your radios menu:
Add an entry Delete an entry Edit an existing entry The K symbol appears on the display when you are modifying the phone list. To Add an Entry 1 ) to enter menu mode. 3 ) to select 3URJUDP/LVWV 3URJUDP/LVWV 4 + or ? until 5 ) to select 3KRQH/LVW 3KRQH/LVW 6 + or ? until
$GG(QWU\"
7 ) to select You see:
$GG(QWU\"
(QWHU1DPH 8 Use the keypad to enter the name (see page 19 and page 20). 9 ) to store the name. You see:
(QWHU3KRQH
P H O N E 69 English 10 Use the keypad to enter the phone number. You can also add a dash (press >) and a Pause Indicator (hold down # until the # character on the display changes to a P). 3 ) to select 3URJUDP/LVWV 4 + or ? until 3KRQH/LVW 11 ) to store the phone number. 12 + or ? until you see the location in the list where you want to store the phone number. 5 ) to select 3KRQH/LVW 13 ) to store the phone number. You see:
(QWU\6DYHG 14 ) to return to
$GG(QWU\"
Hold down ( to exit menu mode. To Delete an Entry 1 ) to enter menu mode. 6 + or ? until
'HOHWH(QWU\"
7 ) to select
'HOHWH(QWU\"
8 + or ? until you see the entry you want to delete. 9 ) to select the entry. 10 You see:
'HOHWH"
2 + or ? until 3URJUDP/LVWV
) again to confirm the deletion. 70 E N O H P English You see:
(QWU\'HOHWHG 6 + or ? until
(GLW(QWU\"
11 ( to return to or
'HOHWH(QWU\"
7 ) to select
(GLW(QWU\"
Hold down ( to exit menu mode. 8 + or ? until you see the entry you want to edit. To Edit an Entry 1 ) to enter menu mode. 2 + or ? until 3URJUDP/LVWV 3 ) to select 3URJUDP/LVWV 4 + or ? until 3KRQH/LVW 9 ) to select the entry. 10 + or ? until
(to edit the name),
(GLW1DPH"
or until
(to edit the phone number),
(GLW1XPEHU"
or until
(to edit the location in the phone list).
(GLW/RFDWLRQ"
5 ) to select 3KRQH/LVW 11 ) to confirm your selection. P H O N E 71 English 12 Use the keypad to edit the entry (see page 21), or
+ or ? until you see the location where you want to store the phone number. 13 ) to store the information. 14 ( to return to or
(GLW(QWU\"
Hold down ( to exit menu mode. E N O H P English 72 I V O C E S T O R A G E VOICE STORAGE The HT1250LS+ radios voice storage feature enables your radio to perform seven types of voice related functions:
Incoming Call Recording Voice Memo Recording Recorded Message Playback Recorded Message Delete Recorded Message Transmission Automatic Message Reply (When Available)
Message Time Stamping There is a total of 120 seconds recording time available for all voice storage activity. Your dealer can divide the 120 seconds into a defined number of equal length time slots. The following table summarizes the slot length options available with the HT1250LS+ radio:
Number of Equal Length Slots Slot Length
(Seconds) 1 2 5 10 20 120 60 24 12 6 When recording calls, keep in mind these time slot guidelines:
As a time slot becomes close to full, you see a timer count down the final 5 seconds. When a time slot is completely full, an alert tone sounds The display shows:
Recording stops. 0VJ6ORW)XOO
When all message slots have at least one message stored, an alert tone sounds. 73 English E G A R O T S E C O V I If a voice storage record function is requested, the dis-
play shows:
0HPRU\)XOO A confirmation tone sounds, indicating that the radio begins recording. INCOMING CALL RECORDING The HT1250LS+ radio allows you to record incoming calls in either of two ways:
Selective Incoming Call Recording
All Incoming Call Recording Note: Only the audio transmissions of your caller is recorded. Selective Incoming Call Recording This feature enables you to record incoming calls selectively, or on a call-by-call basis. To Selectively Record an Incoming Call:
1 Press and hold the preprogrammed Record/
Playback button (see page 22) while receiving the call. The display shows 5HFRUGLQJ 2 The radio records the call until the message slot is full or until you release the prepro-
grammed Record/Playback button. 3 Release the Record/Playback button to stop recording. All Incoming Call Recording This feature enables you to automatically record all incoming trunked and conventional dispatch calls, trunked and conventional telephone interconnect calls, and MDC selective calls. This feature is useful when you need to keep informed of channel activity while away from your radio. Note:
This feature does not work while in scan mode. English 74 I V O C E S T O R A G E To Record All Incoming Calls 1 ) to enter menu mode. 2 + or ? until 9RLFH6WRUDJH 3 ) to select 9RLFH6WRUDJH 4 + or ? until 5 ) to select 5HFRUG 5HFRUG 6 + or ? until 7 ) to select
$OO,QFRPLQJ
$OO,QFRPLQJ 8 The display continuously flashes, except while a call is being recorded.
$OO,QFRPLQJ 5HFRUGLQJ 9 The display shows while your radio is recording. The radio also records the time stamp and the channel alias to the message slot. 10 Press ( to stop recording. or Go to step 1 again to continue recording in the next available slot. 7LPH/HIW;;
Note: Five seconds before the message slot ends, the radio display shows
(where XX = remaining seconds). The voice storage full alert sounds when the message slot is full, and recording stops. The display shows:
0VJ6ORW)XOO 75 English E G A R O T S E C O V I VOICE MEMO RECORDING In addition to recording calls received, the HT1250LS+ radio offers you the ability to record voice memos (or personal reminders) into the radio. The voice memo recording feature is useful for quickly saving phone numbers, names, or any other brief voice information. You can record voice memos using the preprogrammed Record/Playback button
(see page 22) or your radios menu. Important Note:
To record properly, incoming calls cannot be received while a voice memo is being recorded. To Record a Voice Memo using the Preprogrammed Record/Playback Button 2 Without pressing the PTT button, speak clearly into the microphone to record your memo. The radio records your memo until the message slot is full or until you release the preprogrammed Record/Playback button. 3 Release the Record/Playback button to stop recording. To Record a Voice Memo using the Menu 1 ) to enter menu mode. 2 + or ? until 9RLFH6WRUDJH 3 ) to select 9RLFH6WRUDJH 1 Press and hold the preprogrammed Record/
Playback button.
The display shows:
5HFRUGLQJ
A confirmation tone sounds, indicating that the radio begins recording. 4 + or ? until 5 ) to select 5HFRUG 5HFRUG 6 + or ? until 9RLFH0HPR English 76 I V O C E S T O R A G E 7 ) to select The display shows:
5HFRUGLQJ 8 Without pressing the PTT button, speak clearly into the microphone to record your memo. The radio records your memo until the message slot is full or until you press (. Note:
To stop recording at any time, press
(. 9 Press ( to stop recording. or Repeat steps 7 and 8 to store additional messages. RECORDED MESSAGE PLAYBACK The HT1250LS+ allows you to list, select, and Playback previously recorded incoming call or voice memo messages. You can play back a message by using the preprogrammed Record/Playback button (see page 22) or your radios menu. Note:
Recorded message Playback cannot be initiated while your radio is receiving. Also, you dont receive any incoming calls while you play back messages. 3OD\LQJ0VJ;;;
To Play Back a Message using the Preprogrammed Record/Playback Button 1 Press and release the preprogrammed Record/Playback button.
The first message plays, and the dis-
play shows (XXX
= the message number) 3OD\LQJ0VJ;;;
2 To advance to the next message at any time during Play back, press and release the Record/Playback button again. 3 To exit/cancel Play Back mode:
Press and release the preprogrammed Playback Exit button (see page 22). or Press ( to stop Play Back. 77 English E G A R O T S E C O V I To Playback a Message using the Menu 1 ) to enter menu mode. 2 + or ? until 9RLFH6WRUDJH 3 ) to select 9RLFH6WRUDJH 4 + or ? until 5 ) to select 3OD\EDFN 3OD\EDFN 6 + or ? until
$
7 ) to select
$
Message #
Time Stamp Duration (in seconds) RECORDED MESSAGE DELETE The HT1250LS+ radio allows you to delete previously recorded incoming call or voice memo messages. You can delete a message using either the preprogrammed Delete Playback button (see page 22) or your radios menu. Note: Messages must be deleted one at a time. To Delete a Message using the Preprogrammed Delete Playback Button
(see page 22) 1 Press and release the preprogrammed Record/Playback button. 2 + or ? to select the desired message. 3 Press and hold the preprogrammed Delete Playback button to delete current message. 8 + or ? to select the desired message. 4 ( to stop deleting messages. 9 Press ) to play the selected message. 10 + or ? anytime during playback to advance to the next message. English 78 I V O C E S T O R A G E RECORDED MESSAGE TRANSMISSION This feature allows you to transmit a recorded message to another radio user. To Transmit a Recorded Message:
1 Press and hold the PTT button to initiate the message transmission. 2 While holding down the PTT button, press the preprogrammed Record/Playback button to select and play back the desired recorded call or memo. 3 When finished transmitting your message, press the Record/Playback button again to stop transmitting. To Delete a Message using the Menu 1 ) to enter menu mode. 2 + or ? until 9RLFH6WRUDJH 3 ) to select 9RLFH6WRUDJH 4 + or ? until 5 ) to select
'HOHWH
'HOHWH 6 + or ? to select the desired message. 7 Press ) to delete the selected message. 8 + or ? to select the another message to be deleted, then go to step 7. or Press ( to stop deleting messages. 79 English E G A R O T S E C O V I AUTOMATIC MESSAGE REPLY:
WHEN AVAILABLE
(LTR TRUNKED OPERATION ONLY) The automatic Message Reply feature allows you to transmit a recorded message to a caller when your radio receives an MDC selective call. To Enable the Automatic Message Reply Feature 1 ) to enter menu mode. 2 + or ? until 3 ) to select 8WLOLWLHV 8WLOLWLHV 4 + or ? until
:KHQ$YDLODEOH 5 ) to select
:KHQ$YDLODEOH 6 + or ? until
$XWR5HSO\2Q"
7 ) to select To Record a Message 1 + or ? until 5HFRUGHG0VJ
2 ) to select 5HFRUGHG0VJ
Note: The display shows
5HFRUGLQJ 3 Without pressing the PTT button, speak clearly into the microphone to record your memo. The radio records your memo until the message slot is full or until you press (. The display shows:
0VJ6ORW)XOO 4 To exit or cancel recording, press (. With this feature enabled, the recorded message is automatically transmitted when-
ever your radio receives an individual call. English 80 To Disable the Automatic Message Reply Feature 1 ) to enter menu mode. 2 + or ? until 3 ) to select 4 + or ? until 5 ) to select 8WLOLWLHV 8WLOLWLHV
:KHQ$YDLODEOH
:KHQ$YDLODEOH 6 + or ? until
$XWR5HSO\2II"
7 ) to select I V O C E S T O R A G E 81 English Notes E G A R O T S E C O V I English 82 AUDIO/TONE SETTINGS You can customize the audio and tone feature settings on your radio by 1 ) to enter menu mode. 2 + or ? until 3 ) to select
$XGLR7RQHV
$XGLR7RQHV 4 + or ? until you see the feature you want to change (see the table on the next page). 5 ) to select the feature. You see the fea-
tures current setting. 6 + or ? for available settings. (For Name and Call Tone Tagging, see page 51.) 7 ) to set the desired setting. S E T T N G S I I A U D O T O N E
/
83 English Feature
$OHUW9RO/YO Audio/Tone Settings What it Does Makes the volume level of the audio and alert tones inde-
pendent. If turned on, it makes the alert tones follow the settings in the CPS; if turned off, the alert tones follow the setting of the volume knob. 7RQH'LVDEOH Turns all alert and audio tones on or off.
/
E N O T O D U A I I S G N T T E S 1DPHDQG&DOO
7RQH7DJJLQJ
/757UXQNHG
2SHUDWLRQ2QO\
&DOO7RQH7DJ
(VFDOHUW
&RPSDQGLQJ Assigns a specific ring tone when receiving a call from a specific user (see page 51 for details). Assigns a specific tone when receiving a specific type of radio call (see page 51 for details). Increases the volume of the alarm tones when a radio call is not answered. Provides the same audio quality for 12.5 kHz and for 25 kHz channels. H\SDG7RQHV Turns keypad tones on or off except for programmable buttons (see page 22). LTR trunking operation only. Settings
,QG$OHUW2II
,QG$OHUW2Q 7RQHV2Q 7RQHV2II 6WDQGDUG
$OHUW
6WDQGDUG
$OHUW
(VFDOHUW2Q
(VFDOHUW2II
&RPSDQG2Q
&RPSDQG2II 7RQHV2Q 7RQHV2II English 84 UTILITIES You can customize some of your radios feature by:
1 ) to enter menu mode. 2 + or ? until 8WLOLWLHV 3 ) to select 8WLOLWLHV 4 + or ? until you see the feature you want to change (see table on the next page). 5 ) to select the feature. You see the fea-
tures current setting. 6 + or ? for available settings. 7 ) to select the desired setting. I I U T L T E S I 85 English Feature 6TXHOFK 3RZHU/HYHO Utilities Features What it Does Sets radio squelch at either normal or tight (see page 88). Changes the power level of the radio to high, low, or auto
(see page 88).
&ORFN Sets the time, or turns the clock on or off (see page 90). 5HPLQGHU$ODUP Sets the alarm, or turns it on or off (see page 90).
/DQJXDJH 6HOHFWLRQ Selects the language to be shown in your radios dis-
plays.
/LJKW'LVDEOH Turns your radios LED indicator, the display, and keypad backlight on or off. Conventional Operation only. Settings 6TOFK7LJKW 6TOFK1RUPDO 3RZHU+LJK 3RZHU/RZ 3RZHU$XWR
&ORFN2Q
&ORFN2II 6HW7LPH
$ODUP2Q
$ODUP2II 6HW7LPH
(QJOLVK 6SDQLVK 3RUWXJXHVH
)UHQFK
/LJKWVRQ
/LJKWVRII I S E T L I I T U English 86 Utilities Features (continued) Feature What it Does Settings
:KHQ$YDLODEOH
Transmits a recorded message to a caller when your radio receives an MDC Selective call. 6RIWZDUH9HU
Displays the radios software version number when you press ). Note: The LTR and conventional software version number may be different than the PassPort software version number. LTR trunking operation only.
$XWRUHSO\RQ
$XWRUHSO\RII 5HFRUGPVJ 5HYLHZPVJ I I U T L T E S I 87 English SETTING TIGHT OR NORMAL SQUELCH
(CONVENTIONAL OPERATION ONLY) Use this feature to filter out nuisance
(unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. In this case, normal squelch may be more desired. To Select Tight or Normal Squelch Press the preprogrammed Squelch button
(see page 25) to toggle between tight and normal squelch, or Do the following:
4 + or ? until 5 ) to select 6TXHOFK 6TXHOFK 6 + or ? until 6TOFK7LJKW"
or until 6TOFK1RUPDO"
7 ) to confirm the selection. 1 ) to enter menu mode. 2 + or ? until 3 ) to select 8WLOLWLHV 8WLOLWLHV I S E T L I I T U English 88 SETTING THE POWER LEVEL B Each channel in your radio has a predefined transmit power level that can be changed. To Set the Power Level Press the preprogrammed Power Level button
(see page 24) to toggle between low and high, High power (S) allows you to reach a radio that is farther away. or Do the following:
Low power (R) conserves the batterys charge. Auto power (conventional operation only) automatically sets the optimal power level based on the strength of the signal received. If the received signal is weak, the transmit level will be set to high, and vice-
versa. Note:
Be aware that a message received from a nearby radio might change your radios power level to low. This may cause radios that are farther away not to receive your transmissions.
In PassPort mode, the power level is pre-
defined radio wide. 1 ) to enter menu mode. 2 + or ? until 3 ) to select 4 + or ? until 5 ) to select 8WLOLWLHV 8WLOLWLHV 3RZHU/HYHO 3RZHU/HYHO The display shows the current power level. 6 + or ? until 3RZHU+LJK"
or until or until 3RZHU/RZ"
3RZHU$XWR"
7 ) to confirm the selection. I I U T L T E S I 89 English SETTING THE CLOCK/ALARM To Set the Clock/Alarm 1 ) to enter menu mode. 2 + or ? until 8WLOLWLHV 3 ) to select 8WLOLWLHV 8 When a setting is blinking, you can change it with + or ?. Hour (AM or PM)
30 Minutes
(AM/PM or 24 hr) Note:
You cannot select 24 hr for 9 < or > to move to the previous or next 5HPLQGHU$ODUP 4 + or ? until
&ORFN setting. or until 5HPLQGHU$ODUP 10 ) to save your changes. 5 ) to confirm your selection. 6 + or ? until 6HW7LPH"
7 ) to select 6HW7LPH"
11 ( to return to 8WLOLWLHV or to return to 5HPLQGHU$ODUP or or
&ORFN Hold down ( to exit menu mode. I S E T L I I T U English 90 W A R R A N T Y WARRANTY LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
MOTOROLA INC. (MOTOROLA) war-
rants the MOTOROLA manufactured Com-
munication Products listed below
(Product) against defects in material and workmanship under normal use and ser-
vice for a period of time from the date of purchase as scheduled below:
HT1250LS+ Portable Units Two (2) Years Product Accessories One (1) Year Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Prod-
uct shall become the property of MOTOR-
OLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not 91 English Y T N A R R A W furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. II. GENERAL PROVISIONS:
III. STATE LAW RIGHTS:
This warranty sets forth the full extent of MOTOROLAS responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLAs option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. English 92 W A R R A N T Y IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase
(bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola at 1-
800-927-2744 US/Canada. V. WHAT THIS WARRANTY DOES NOT COVER:
A) Defects or damage resulting from use of the Product in other than its normal and customary manner. B) Defects or damage from misuse, accident, water, or neglect. C) Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. D) Breakage or damage to antennas unless caused directly by defects in material workmanship. E) A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorolas normal warranty inspection and testing of the Product to verify any warranty claim. F) Product which has had the serial number removed or made illegible. G) Rechargeable batteries if:
1) 2) any of the seals on the battery enclosure of cells are broken or show evidence of tampering. the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. H) Freight costs to the repair depot. A Product which, due to illegal or I) unauthorized alteration of the software/
firmware in the Product, does not function in accordance with MOTOROLAs published 93 English Y T N A R R A W specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. J) Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. K) Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
A) that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;
that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and B) C) should the Product or parts become, or in MOTOROLAs opinion be likely to become, the subject of a claim of infringement of a English 94 United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, USA. W A R R A N T Y 95 English Notes Y T N A R R A W English 96 M./
ACCESSORIES CHARGERS AAHTN3000_ AAHTN3003_ NLN7967 RLN4883 RL-76345 WPLN4071_R WPLN4079-R 120 Volt, Rapid Rate, Single-Unit Intelli-
Charger 120Volt, 6-Unit, Rapi-Rate Intelli-
Charger Wall Mount Kit for Multi-Unit Charger Travel Charger (includes voltage regu-
lated lighter adapter, custom charger bse, coil cord, and mounting bracket) Battery Optimizing System (BOS) Adapter Plate Battery Optimizing System - 110 Volt AC, 50/60 Hz, 4 Station Battery Maintenance System Plus
(BMS Plus) - 110 Volt AC, 50/60 Hz A C C E S S O R E S I Motorola offers a number of accessories to enhance the productivity of your two-way radio. Many of the available accessories are listed below. For a complete list, see your Motorola dealer. CARRY CASES HLN9714_ HLN9677_ HLN9689_ HLN9690_ HLN9694_ HLN9745_ HLN9946 HLN9998 HLN9945 HLN9955 Spring 2 1/2 Belt Clip Leather DTMF Case, Thin Battery with Belt Loop Leather DTMF Case, Standard Battery with Belt loop Leather DTMF Case, Thin Battery with Swivel Leather DTMF Case, Standard Battery with Swivel Soft-Leather Case, Tall, DTMF, Belt Loop, Standard Battery Leather Keypad Case with Belt Loop Leather Keypad Case with Swivel Leather Keypad Case with Belt Loop Leather Keypad Case with Swivel 97 English WPPN4079-R WPLN4107-R WPPN4065-R WPPN4082-R RLN4814 BMS Battery Adapter (For Ni-Cad and NiMH Batteries) Motorola Conditioning Charger Kit
(includes 7.2 Volt base, removable adapter plate and transformer, 60 minute Rapid Charger, 110V) Motorola Conditioning Charger. Four-
Station Base only. 110V (requires Adapter Plate) Adapter Plate Only (for Motorola Conditioning Charger) Vehicular Mounting Bracket (for use with Motorola Single Unit Condition-
ing Charger Bases) HEADSETS AND ACCESSORIES AARMN4018 AARMN4031 Lightweight Headset with Boom Microphone and In-Line PTT - FM
(Factory Mutual) Approved Lightweight Headset with Swivel Boom Microphone - (FM Approved (VOX opera-
tional only on conventional channel) AARMN4017 Ultra-Light Headset - FM Approved (VOX operational only on conventional channel) I S E R O S S E C C A English 98 AARMN4019 Medium Weight Over-the-Head Dual Muff Headset with Noise Cancelling Microphone and in line PTT. FM Approved RMN4051 ARMN4020 AARMN4032 Medium Weight Over-the-Head Dual Muff Headset with Noise Canceling Microphone - FM Approved Heavy Duty Muff Headset with Noise Cancelling Microphone and PTT on Earcup, Noise Reduction Rating = 24 dB
- FM Approved (VOX operational only on conventional channel) 2-Way Hard-hat Mount Headset, Black -
Noise Reduction Rating = 22 dB
(required RKN4097) Tactical HeadBand-Style Headset, Gray -
Noise Reduction Rating = 24 dB
(requires RKN4097) Tactical Hard-hat Mount Headset, Gray -
Noise Reduction Rating = 22 dB
(requires RKN4097) Receive-Only Hard-hat Mount Headset with 3.5mm right angle plug - Noise Reduction Rating = 22 dB Receive-Only headBand-Style Headset with 3.5mm right angle plug - Noise Reduction Rating = 24 dB RMN4054 RMN4052 RMN4055 RMN4053 EAR MICROPHONE SYSTEM BDN6677 BDN6678 BDN6641 AARMN4044 0180358B38 0180300E83 Ear Microphone - Black (for noise levels up to 95 dB) - requires Interface Module Ear Microphone - Beige (for noise levels up to 95 dB) - requires Interface Module Ear Microphone - Gray (for high noise levels from 95 dB to 105 dB) - requires Interface Module - FM Approved Interface Module for PTT Operation Only
- FM Approved Finger Push to Talk Switch for Ear Micro-
phone System - FM Approved Body Switch Push to Talk for Ear Micro-
phone System RKN4097 AARMN4021 AARMN4022 AARMN4028 AARMN4029 In-Line Adapter Cable for user with RMN4051. RMN4052, and RMN4053 Headsets Ear Piece without Volume Control
(Beige) - FM Approved 2 Wire Ear Piece with Microphone and PTT (Beige) - FM Approved Ear Piece without Volume Control (Black)
- FM Approved 2 Wire Ear Piece with Microphone and PTT (Black) - FM Approved MICROPHONES AAHMN9052_ Standard Remote Speaker Microphone AAHMN9053_ Noise-Cancelling Remote Speaker Microphone - FM Approved AAHMN9054_ Public Safety Remote Speaker AAHKN9055 Microphone - FM Approved Remote Speaker Microphone Replacement Cable A C C E S S O R E S I 99 English I S E R O S S E C C A INTEGRATED MICROPHONE/
RECEIVER This devicess acoustic technology does not rely on conduction for communication. NTN1722 NKN6508 NTN1723 NKN6510 NTN1724 NTN8821 NTN8986 NTN8988 Integrated Ear Microphone/Receiver System with PTT on Radio Adapter - FM Approved Replacement Cable for NTN1722 Integrated Ear Microphone/Receiver System wit Palm PTT - FM Approved Replacement Cable for NTN1723 Integrated Ear Microphone/Receiver System with Ring PTT - FM Approved CommPort Maintenance Kit - includes Replacement Ear Tubes (qty 10). Windscreens (qty 2) and Microphone Seal Strips (qty 10) Adhesive Pads (qty 90) for secure attachment to the ear Ear Straps (qty 10) for secure attachment to the ear EARPIECE AARLN4885 RLN4941 RLN4922 NTN8370 NTN8371 RLN4760 RLN4761 RLN4762 RLN4763 RLN4764 Receive Only Foam Earbud with 3.5mm plug - (for use with AAHMN9053, AAHMN8054, and AAHMN9057) - FM Approved Receive-Only Earpiece with translucent tube, rubber eartip, and 3.5mm plug (for use with AAHMN9053, AAHMN9054, and AAHMN9057) Completely Discrete Earpiece Kit - must be used with any standard 2 or 3 wire sur-
veillance earpiece kit Extreme Noise Earpiece Adapter Kit, Noise Reduction Rating - 28 dB (for use with AARMN4022 and AARMN4029) Low Noise Earpiece Adapter Kit (for use with AARMN4022 and AARMN4029) Small Custom Earpiece, Right Ear (for use with NTN8370 or NTN8371) Medium Custom Earpiece, Right Ear (for use with NTN8370 or NTN8371) Large Custom Earpiece, Right Ear (for use with NTN8370 or NTN8371) Small Custom Earpiece, Left Ear (for use with NTN8370 or NTN8371) Medium Custom Earpiece, Left Ear (for user with NTN8370 or NTN8371) English 100 AARLN4885 RLN4765 Receive Only Foam Earbud with 3.5mm plug - (for use with AAHMN9053, AAHMN8054, and AAHMN9057) - FM Approved Large Custom Earpiece, Left Ear (for use with NTN8370 or NTN8371) ADAPTERS HLN9820 HLN 9793 HLN9794 AAHLN9716 Accessory Dust Cover Charger Insert Spacer - Compatible with A versions chargers ONLY Charger Insert Spacer - Compatible with B versions chargers ONLY Audio Accessory Adapter for the user of GP300/P1225LS audio accessories - FM Approved (not compatible with BDN6706 or BDN6646) BATTERIES HNN9008_R 1200 mAH NiMH High Capacity Battery
(standard) HNN9009_R 1900 mAH NiMH Ultra High Capacity Battery HNN9010_R 1850 mAH NiMH, Ultra High Capacity -
FM Approved HNN9011_R 1200 mAH Ni-Cad, High Capacity Bat-
tery - FM Approved HNN9012_R 1350 mAH Ni-Cad High Capacity Battery HNN9013_R 1200 mAH Lithium Ion Battery ANTENNAS HKAD4000_ 220 MHz, Helical NAF5083 700 MHz 1/2-Wave, Whip MANUALS 6864110R12 HT1250LS+ Service Manual A C C E S S O R E S I 101 English Notes I S E R O S S E C C A English 102 Selecting a Trunked Zone and Talkgroup 1. Turn Zone Selector knob to appropriate trunked zone. Sending a Trunked Call 1. Press PTT. If trunked system access was successful LED = steady red;
if unsuccessful LED = flashing red; low pitched tone sounds. 2. Speak clearly into microphone. Release PTT to listen. Initial PassPort System Registration HT1250LS+ Radio Quick Reference Card Record the functions for your radios programmable buttons in the table provided below. For further information, see pages 22 and 24 in this Users Guide. 3$663257 Upon power up, PassPort alias appears on the display. Zone Selector Knob
<2857/.*53$/,$6 The selected talkgroup alias appears on the display. 6($5&+,1*
5(*6,7(;;;
7/.*53$/,$6 May appear if a PassPort site cannot be quickly located. Appears indicating successful PassPort registration
(XXX = PassPort site on which you are registered). Selected talkgroup alias appears and remains on the display upon successful registration. Turn Zone Selector knob to appropriate conventional zone. Selecting a Conventional Zone and Channel 1. Sending a Conventional Call 1. Press PTT and speak clearly into microphone. LED = steady red while call is being sent. Release PTT to listen. Receiving a Trunked or Conventional Call 1. Turn Zone Selector knob to desired trunked or conventional zone. Make sure PTT is released. When a call is received, the LED flashes red. Making a Selective Call (Trunked Operation Only) 1. 2. From Selective Call menu, select or enter desired radio ID number. Press PTT to send the call. The radio sounds a continuous tone. Press PTT and talk;
release PTT to listen. Receiving a Selective Call (Trunked Operation Only)
When a Selective Call is received, the radio displays F symbol and name or ID of calling radio; the LED flashes yellow. Press PTT to answer. On/Off Volume Knob Side Button 1 (A)
(programmable) Push-to-Talk Button Side Button 2 (B)
(programmable) Side Button 3 (C)
(programmable) Top Button (D)
(programmable) LED Indicator Microphone Display Menu Keys
(P1, P2, P3)
(programmable) Keypad Button Function Short Press Long Press Hold Down Page Menu Navigation Chart
(Refer to Menu Navigation guidelines lower, left-hand corner of this page)
)
+ ?
* Available in PassPort trunked zones only Available in LTR trunked zones only Available in conventional zones only
(LTR) Radio Call Rptr/
Talkarnd
(p. 38)
+ ?
+ ?
repeater mode/
talkarnd mode
(LTR)All Group Scan(p. 58)
+ ?
on/off PP Group Scan*
(p. 56)
+ ?
on/off Voice Storage
+ ?
LTR /Con System Scan
+ ?
on/off Program Lists
+ ?
Selective Call Call Alert Radio Check select/enter ID select/enter ID select/enter ID Menu Navigation
) to enter menu mode
+ or ? to scroll through the list Delete
(p. 78) Playback
(p. 77) Record
(p. 74) Phone List
(p. 69) add/delete/
edit entry all incoming voice memo LTR RadioCall List
(p. 50) edit entry Scan List
(p. 60) add/delete entry edit priority
( and )
) to select menu item
+ or ? to scroll through sub-list
( to return to previous menu level
) to select sub-menu item or Hold down ( to exit menu mode Phone
(p. 65) Audio/Tones
(p. 83) Utilities
(p. 85)
+ ? + ?
Alert Vol Lvl on/off Tone Disable on/off Name Tone Tag standard/alert
#1 - #7 LTR Call Tone Tag standard/alert
#1 - #7 LTR Escalert on/off Companding on/off Keypad Tones on/off Squelch normal/
tight Power Level high/low/
auto ( and ) Clock on/off/set time Reminder Alarm on/off/set time Language Select English/French/
Portugese/
Spanish Light Disable on/off When Avail-
able () on/off Software Ver#
6864110R11-O_cvr.qxd 11/30/01 2:09 PM Page 1 Motorola, The Stylized M logo, Professional Radio - As Dedicated As You Are, HT Series, HT1250LS+, and Call Alert are trademarks of Motorola, Inc. PassPort is a trademark of Trident Micro Systems. LTR is a trademark of E.F. Johnson Company. 1999, 2000, 2001 Motorola, Inc. All rights reserved. Printed in U.S.A.
*6864110R11*
6866110R11-O HT1250LS++ User Guide Professional Radio - As Dedicated As You Are
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2002-05-28 | 220 ~ 222 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2002-05-28
|
||||
| 1 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
| 1 | FCC Registration Number (FRN) |
0025009739
|
||||
| 1 | Physical Address |
1303 East Algonquin Road
|
||||
| 1 |
Schaumburg, IL
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| n/a | ||||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
ABZ
|
||||
| 1 | Equipment Product Code |
99FT3080
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
R****** S******
|
||||
| 1 | Telephone Number |
847-3********
|
||||
| 1 | Fax Number |
847-5********
|
||||
| 1 |
B******@motorolasolutions.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
Motorola, Inc
|
||||
| 1 | Name |
J****** Z********
|
||||
| 1 | Physical Address |
1313 E. Algonquin Rd
|
||||
| 1 |
Schaumburg
|
|||||
| 1 |
Schaumburg, Illinois 60196
|
|||||
| 1 |
United States
|
|||||
| 1 | Telephone Number |
847 5********
|
||||
| 1 | Fax Number |
847 5********
|
||||
| 1 |
j******@motorola.com
|
|||||
| app s | Non Technical Contact | |||||
| 1 | Firm Name |
Motorola, Inc.
|
||||
| 1 | Name |
D******** T****
|
||||
| 1 | Physical Address |
1313 E. Algonquin Rd
|
||||
| 1 |
Schaumburg
|
|||||
| 1 |
Schaumburg, Illinois 60196
|
|||||
| 1 |
United States
|
|||||
| 1 | Telephone Number |
847 5********
|
||||
| 1 | Fax Number |
847 5********
|
||||
| 1 |
C******@email.mot.com
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | HT1250LS+ 220MHz Portable Radio | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas tested for this filing in Push-to-Talk and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values are Head: 2.19 W/kg; Body worn: 3.48 W/kg assuming 50 % usage duty cycle. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| n/a | ||||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 80,90.259 | 217 | 218 | 5.5 | 2.5 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 80,90.259 | 219 | 220 | 5.5 | 2.5 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
| 1 | 3 | 9 | 220 | 222 | 5.5 | 2.5 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
| 1 | 4 | 80,90.259 | 217 | 218 | 1 | 2.5 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
| 1 | 5 | 80,90.259 | 219 | 220 | 1 | 2.5 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
| 1 | 6 | 9 | 220 | 222 | 1 | 2.5 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC