all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual 1 | Users Manual | 2.17 MiB | March 10 2007 | |||
1 |
|
Users Manual 2 | Users Manual | 2.04 MiB | March 10 2007 | |||
1 | External Photos | March 10 2007 | ||||||
1 | Cover Letter(s) | March 10 2007 | ||||||
1 | External Photos | March 10 2007 | ||||||
1 | ID Label/Location Info | March 10 2007 | ||||||
1 | Internal Photos | March 10 2007 | ||||||
1 | RF Exposure Info | March 10 2007 | ||||||
1 | RF Exposure Info | March 10 2007 | ||||||
1 | RF Exposure Info | March 10 2007 | ||||||
1 | RF Exposure Info | March 10 2007 | ||||||
1 | Test Report | March 10 2007 | ||||||
1 | Test Report | March 10 2007 | ||||||
1 | Test Setup Photos | March 10 2007 |
1 | Users Manual 1 | Users Manual | 2.17 MiB | March 10 2007 |
ML910Rugged Notebook User Guide Motorola, Inc. All rights reserved Owners Manual R00 Part Number: 6871008P31 TRADEMARKS MOTOROLA, the Stylized M Logo, and ML910 TM RUGGED NOTEBOOK are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. NOTE:
Information in this user guide is subject to change without notice. COPYRIGHT Copyright 2007 Motorola Inc. All rights reserved. No part of this user guide may be transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola Inc. i LICENSE AGREEMENT MOTOROLA, INC. (MOTOROLA) IS WILLING TO LICENSE THE SOFTWARE EMBEDDED IN THE ENCLOSED PRODUCT (THE SOFTARE) TO YOU ONLY ON THE CONDITION THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS LICENSE AGREEMENT
(AGREEMENT). PLEASE READ THE TERMS CAREFULLY.YOUR USE OF THE PRODUCT WITH THE EMBEDDED SOFTWARE WILL INDICATE YOUR ASSENT TO THEM. IF YOU DO NOT AGREE TO THESE TERMS, THEN MOTOROLA IS UNWILLING TO LICENSE THE SOFTWARE TO YOU, IN WHICH EVENT YOU SHOULD NOT USE THE PRODUCT WITH THE EMBEDDED SOFTWARE AND YOU SHOULD RETURN IT TO THE PLACE FROM WHICH IT WAS ACQUIRED, AND YOUR MONEY WILL BE REFUNDED. Section 1 GRANT OF LICENSE Motorola hereby grants to You a personal, non-exclusive, non-transferable right to use the Software subject to the Conditions Of Use set forth in Section 2 below and the terms and conditions of this Agreement. Section 2 CONDITIONS OF USE 2.1 Use of the Software outside of the conditions set forth herein is strictly prohibited and will be deemed a breach of this Agreement. 2.2 You shall use the Software (i) only for Your internal business purposes; (ii) only as described in the Software or product documentation; and (iii) in strict accordance with this Agreement. 2.3 You shall not transfer, download, copy, distribute, sublicense, modify, adapt, merge with other software, reverse engineer, prepare derivative works of, decompile or disassemble any Software for any reason. 2.4 You shall not remove, destroy, or alter any proprietary markings or legends placed upon or contained within the Software, related materials or documentation. 2.5 You shall not export, re-export, resell, ship or divert or cause to be exported, re-exported, resold, shipped, or diverted, directly or indirectly, the Software under this Agreement. Section 3 TITLE AND OWNERSHIP Title to all copies of Software will not pass to You at any time and remains vested exclusively in Motorola or the copyright owner. Motorola or the copyright owner owns and retains all of its proprietary rights in any form concerning the Software, including all rights in patents, patent applications, inventions, copyrights, trade secrets, trademarks, trade names, and other intellectual properties. Nothing in this Agreement is intended to restrict the proprietary rights of Motorola or the copyright owner or to grant by implication or estoppel any proprietary rights. All intellectual property developed, originated, or prepared by Motorola or the copyright owner in connection with providing the Software, products, or related services to You remains vested exclusively in Motorola or the copyright owner, and this Agreement does not grant to You any shared development rights of intellectual property. ii Section 4 CONFIDENTIALITY You acknowledge that all Software contains valuable proprietary information and trade secrets and that unauthorized or improper use of Software will result in irreparable harm to Motorola for which monetary damages would be inadequate and for which Motorola will be entitled to immediate injunctive relief. Accordingly, You will limit access to Software to employees and agents who need to use the Software for Your internal business purposes, and You will take appropriate action with those employees and agents to preserve the confidentiality of Software, using the same degree of care to avoid unauthorized or improper disclosure as You use for the protection of Your own proprietary software, but in no event less than reasonable care. Notwithstanding anything to the contrary herein, You shall have no obligation to preserve the confidentiality of any proprietary information that (i) was in the public domain at the time of disclosure; (ii) entered the public domain through no fault of You; (iii) was given to You free of any obligation to keep it confidential; (iv) is independently developed by You; or (v) is disclosed as required by law provided that You notify Motorola prior to such disclosure and provide Motorola with a reasonable opportunity to respond. Section 5 RIGHT TO USE MOTOROLAS NAME You shall not, during the term of this Agreement or thereafter, use any trademark of Motorola, or any word or symbol likely to be confused with any Motorola trademark, either alone or in any combination with another word or words. Section 6 PAYMENT The rights granted hereunder are contingent upon payment for the product in which the Software is embedded. Section 7 TERM AND TERMINATION Your right to use Software will begin when You begin using the product with the embedded Software, which constitutes acceptance of the terms and conditions herein, and will continue in perpetuity unless terminated as set forth herein. Your right to use Software will terminate immediately without notice upon a breach of this Agreement by You. Otherwise, this Agreement may be terminated by either party upon thirty (30) days prior written notice. Within thirty (30) days after termination of this Agreement, You will certify to Motorola in writing that through Your best efforts, and to the best of Your knowledge, the original and all copies, in whole in part, in any form, of the Software and all related material and documentation, have been destroyed. Section 8 MAINTENANCE Motorola shall not be responsible for maintenance or field service of the Software under this Agreement. Section 9 NO WARRANTY MOTOROLA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. MOTOROLA DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. INCLUDING IMPLIED, THE iii Section 10 LIMITATION OF LIABILITY MOTOROLAS TOTAL LIABILITY UNDER THIS AGREEMENT FOR DAMAGES SHALL NOT EXCEED THE TOTAL AMOUNT PAID BY YOU FOR THE SOFTWARE UNDER THIS AGREEMENT. IN NO EVENT WILL MOTOROLA BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES. Section 11 U.S. GOVERNMENT If You are a unit or agent of the U.S. Government, You acknowledge Motorolas representation that the Software represents Commercial Computer Software and that the Governments use of the Software shall be subject to Restricted Rights, as provided in DFARS 252.2277013 (c) (1) (ii), or FAR 52.22719. Section 12 GOVERNING LAW This Agreement shall be governed by the laws of the United States of America to the extent that they apply and otherwise by the laws of the State of Illinois. Section 13 ASSIGNMENT This Agreement may not be assigned or otherwise transferred by You. Section 14 SURVIVAL OF PROVISIONS The parties agree that where the context of any provision indicates an intent that it shall survive, the term of this Agreement then it shall survive. Section 15 ENTIRE AGREEMENT:
This Agreement contains the parties entire agreement regarding Your use of Software and may be amended only in a writing signed by both parties, except that Motorola may modify this Agreement as necessary to comply with applicable laws and regulations including FCC regulations. Section 16 THIRD-PARTY SOFTWARE The Software may contain one or more items of third-party software supplied by other third-party suppliers. The terms of this Agreement govern Your use of any third-party software UNLESS A SEPARATE THIRD-PARTY SOFTWARE LICENSE IS INCLUDED WITH THIS PACKAGE, IN WHICH CASE YOUR USE OF THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARATE THIRD-PARTY LICENSE. IF THE FOREGOING TERMS AND CONDITIONS ARE ACCEPTABLE TO YOU, YOU AGREE THAT YOUR USE OF THE PRODUCT WITH THE EMBEDDED SOFTWARE WILL INDICATE YOUR ACCEPTANCE OF THIS AGREEMENT. IF THE FOREGOING TERMS AND CONDITIONS ARE NOT ACCEPTABLE TO YOU, THEN MOTOROLA IS UNWILLING TO LICENSE THE SOFTWARE TO YOU, IN WHICH EVENT YOU SHOULD NOT USE THE PRODUCT WITH THE EMBEDDED SOFTWARE AND YOU SHOULD RETURN IT TO THE PLACE FROM WHICH IT WAS ACQUIRED, AND YOUR MONEY WILL BE REFUNDED. COMPUTER SOFTWARE COPYRIGHTS iv The Motorola products described in this user guide may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this user guide may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. This Warranty applies within the fifty (50) United States' the District of Columbia and Canada. v LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS If the affected product is being purchased pursuant to a written Communications System Agreement signed by Motorola, the warranty contained in that written agreement will apply. Otherwise, the following warranty applies. I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
Motorola Inc. or if applicable, Motorola Canada Limited ("Motorola",) warrants the Motorola manufactured radio communications product ("Product"), against material defects in material and workmanship under normal use and service for a period of Three (3)Years from the date of shipment. Accessories, including batteries carry their own separate limited One (1) year warranty. Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it with the same or equivalent Product (using new or reconditioned Product), or refund the purchase price of the product during the warranty period provided purchaser notifies Motorola according to the terms of this warranty. Repaired or replaced Product is warranted for the balance of the original applicable warranty period. All replaced parts of the Product shall become the property of Motorola. This express limited warranty is extended by Motorola to the original end user purchaser purchasing the Product for purposes of leasing or for commercial, industrial, or governmental use only, and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by Motorola. Motorola assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of Motorola. Unless made in a separate written agreement between Motorola and the original end user purchaser, Motorola does not warrant the installation maintenance or service of the Product. Motorola cannot be responsible in any way for any ancillary equipment not furnished by Motorola which is attached to or used in connection with the product, or for operation of the Product with any ancillary equipment and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, Motorola disclaims liability for range, coverage, or operation of the system as a whole under this warranty. II. GENERAL PROVISIONS:
This warranty sets forth the full extent Motorolas responsibilities regarding the product. Repair replacement or Refund of the purchase price, at Motorolas option, is the exclusive is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. vi MOTOROLA DISCLAIMS ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE OF PRICE THE PRODUCT FOR ANY LOSS OF USE LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT TO THE FULL EXTENT SUCH MAY BE DISCLAMIED By LAW. III. How TO GET WARRANTY SERVICE:
Purchaser must notify Motorolas representative or call Motorolas Customer Response Center at1.800.247.2346 within the applicable warranty period for information regarding warranty service. IV. WHAT THIS WARRANTY DOES NOT COVER:
A) Defects or damage resulting from use of the Product in other than its normal and customary manner. B) Defects or damage from misuse, accident, water, or neglect. C) Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. D) Breakage or damage to antennas unless caused directly by defects in material workmanship. E) A Product subjected to unauthorized Product modifications, disassemblies or repairs
(including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorolas normal warranty inspection and testing of the Product to verify any warranty claim. F) Product which has had the serial number removed or made illegible. G) Accessories, including batteries carry their own separate limited One (1) year warranty. H) Freight costs to the repair depot. I) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with Motorolas published specifications or with the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from Motorola. J) Scratches or other cosmetic damage to Product surfaces that do not affect the operation of the Product. K) That the software in the product will meet the purchasers requirements or that the operation of the software will be uninterrupted or error-free. L) Normal and customary wear and tear. M) Non-Motorola manufactured equipment unless bearing a Motorola Part Number in the form of an alphanumeric number (i.e., TDE6030B). vii V. GOVERNING LAW In the case of a Product sold in the United States and Canada, this Warranty is governed by the laws of the State of Illinois and the Province of Ontario respectively. VI. PATENT AND SOFTWARE PROVISIONS:
Motorola will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or its parts infringe a United States patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
A) That Motorola will be notified promptly in writing by such purchaser of any notice of such claim;
B) That Motorola will have sole control of the defense of such suit and all negotiations for its settlement or compromise;
C) Should the Product or its parts become, or in Motorolas opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit Motorola, at its option and expense, either to procure for such purchaser the right to continue using the product or its parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or its parts as depredated and accept its return. The depreciation will be an equal amount per year over the lifetime of the product or its parts as established by Motorola. Motorola will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or its parts furnished hereunder with software, apparatus or devices not furnished by Motorola, nor will Motorola have any liability for the use of ancillary equipment or software not furnished by Motorola which is attached to or used in connection with the Product. The foregoing states the entire liability of Motorola with respect to infringement of patents by the Product or any of its parts thereof. viii Regulations Information SAFE USAGE NOTIFICATION For reason of personal safety and optimal radio performance, Motorola has designed the ML910 TM RUGGED NOTEBOOK with an intended purpose and position of use either in a secured vehicle docking station or on the top of an office desk. Motorola strongly recommends using this product in a vehicle only when it is physically-secured in a lock or assured-stationary location as failure to do so may cause the product to cause harm in accidents or other conditions. US and Canada Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. Please note:
The use of a non-shielded interface cable with this equipment is prohibited. ix Wireless LAN Module Statement FCC CAUTION:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. If the ML910 TM RUGGED NOTEBOOK computer has the Intel 3945abg module
(802.11abg) installed, operation on the 5.15-5.25GHz frequency band is restricted to indoor use only. The FCC requires indoor use for the 5.15-5.25GHz band to reduce the potential for harmful interference to co-channel Mobile Satellite Systems. When the internal ML910 TM RUGGED NOTEBOOK 802.11abg module is configured to the Motorola default state, it will only transmit on the 5.15-5.25GHz band when associated with an access point (AP) that uses the 5.15-5.25GHz band and such applications should only be used indoors. Use in the 802.11a frequency range is limited to client-AP association. Client-client association (AD HOC mode) is not supported. FCC External Antenna Placement When the Motorola WMC6300 or WMC7300 PCMCIA radio modems are integrated in the PCMCIA slot of the ML910 TM RUGGED NOTEBOOK, the external antenna must be placed as shown in the picture below to comply with FCC RF exposure requirements. FCC RF Exposure Statement This equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and all persons. See page 1-10 of the Users Guide for antenna locations. x To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC RF Exposure Warning The ML910 TM RUGGED NOTEBOOK provides a PCMCIA slot that could be used with PCMCIA based wireless transmitters. Motorola only supports the use of PCMCIA based wireless transmitter cards that have been approved for use in the ML910 TM. Currently the WMC6300, WMC7300, and WDE1000 have been approved. Other 3rd party PCMCIA based wireless transmitters have not been RF exposure evaluated for use in the ML910 and may not comply with FCC RF exposure requirements. IMPORTANT NOTE:
To comply with FCC RF exposure compliance requirements, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter other than those approved for use in Motorola series ML910 TM RUGGED NOTEBOOK. Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numrique de Classe B respecte toutes les exigences du Rglement Canadien sur le matriel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le prsent appareil numrique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de la classe B prescrites dans le Rglement sur le brouillage radiolectrique dict par le ministre des Communications du Canada. xi CMM labeling and Disclosure Table The Peoples Republic of China require that our products comply with China Management Methods (CMM) environmental regulations. (China Management Methods refers to the Regulation Management Methods for Controlling Pollution by Electronic Information Products.) Two items are used to demonstrate compliance; the Label and the Disclosure Table. The label is placed in a customer visible position on the product. The first of the following examples means that the product contains no hazardous substances; the second means that the product contains hazardous substances, and has an Environmental Friendly Use Period
(EFUP) of fifty years. Logo 1 Logo 2 The Environmental Friendly Use Period (EFUP) is the period (in years) during which the Toxic and Hazardous Substances (T&HS) contained in the Electronic Information Product (EIP) will not leak or mutate causing environmental pollution, or bodily injury from the use of the EIP. The Disclosure Table, printed in simple Mandarin, is included with each customer order. An example of the Disclosure Table follows, in both Mandarin and English. xii European Union CE Marking and Compliance Notices Statements of Compliance English This product follows the provisions of the European Directive 1999/5/EC. Danish Dette produkt er i overensstemmelse med det europiske direktiv 1999/5/EC. Dutch Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC. Finnish Tm tuote noudattaa EU-direktiivin 1999/5/EC mryksi. French Ce produit est conforme aux exigences de la Directive Europenne 1999/5/EC. German Dieses Produkt entspricht den Bestimmungen der Europischen Richtlinie 1999/5/EC. Greek To 1999/5/EC. Icelandic essi vara stenst regluger Evrpska Efnahags Bandalagsins nmer 1999/5/EC. Italian Questo prodotto conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC. Portuguese Este produto cumpre com as normas da Diretiva Europia 1999/5/EC. Spanish Este producto cumple con las normas del Directivo Europeo 1999/5/EC. Swedish Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC. xiii Local Restrictions of 802.11a/b/g Radio Usage CAUTION:
Due to the fact that the frequencies used by 802.11a/b/g wireless LAN devices may not yet be harmonized in all countries, 802.11a/b/g products are designed for use only in specific countries or regions, and is not allowed to be operated in countries or regions other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use. Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such. The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows:
General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) in the frequency range 2400 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading How to Turn Off the Wireless LAN Radio. xiv France Departments in Which the Wireless LAN Module Can Be Used (Indoors Only) The wireless LAN module can currently be used indoors only in the following 38 departments of mainland France. Please turn off your wireless LAN radio when operating the device in areas/places other than the 38 departments listed:
01 Ain Orientales 02 Aisne 03 Allier 05 Hautes Alpes 08 Ardennes 09 Arige 11 Aude 12 Aveyron 16 Charente 24 Dordogne 25 Doubs 26 Drme 32 Gers Indre Indre et Loire 36 37 41 Loir et Cher 42 Loire 45 Loiret 50 Manche 55 Meuse 58 Nivre 59 Nord 60 Oise 61 Orne 63 Puy du Dme 64 Pyrnes Atlantique 66 Pyrnes 67 Bas Rhin 68 Haut Rhin 70 Haute Sane 71 Sane et Loire 75 Paris 82 Tarn et Garonne 84 Vaucluse 88 Vosges 89 Yonne 90 Territoire de Belfort 94 Val de Marne Departments in Which the Wireless LAN Modules Maximum EIRP Not Shown in the Previous Table Frequency Ranges (MHz) 2400 2446.5 2446.5 2483.5 Indoors 10 mW 100 mW 100 mW on private property with Not permitted Outdoors Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE:
1. Turning the wireless LAN radio off is not the same as disabling the wireless LAN card. 2. It is not necessary to disable the card to meet the regulatory requirements. 3. While operating the computer in those French departments that do not allow use of the wireless LAN equipment, the user of the equipment must turn off the wireless LAN radio in order to comply with local regulations. xv Product Safety and RF Exposure Information CAUTION:
BEFORE USING ML910 TM RUGGED NOTEBOOK, READ THIS SECTION WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. Compliance with RF Energy Exposure Standards NOTE:
ML910 TM RUGGED NOTEBOOK is intended for general population, consumer or similar use;
where users are not necessarily aware of the potential for exposure and may not exercise control over their exposure. This product safety section includes useful information about RF exposure and helpful instructions on how to control your RF exposures. For additional information on exposure requirements or other training information, visit http://www.motorola.com/rfhealth. Radio Frequency Interference Requirements and SAR The FCC with its action in ET Docket 93-62 has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC certified equipment. All wireless modules meets the Human Exposure limits found in OET Bulletin 65, 2001 and IEEE Std C95.1-2005. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:
Do not touch or move antenna while the unit is transmitting or receiving. Do not operate the radio or attempt to transmit data unless the antenna is connected;
if not, the radio may be damaged. Electromagnetic Interference/Compatibility NOTE:
Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your ML910 TM RUGGED NOTEBOOK and/or integrated radios in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your ML910 TM RUGGED NOTEBOOK and/or integrated radios when on board an aircraft. Any use of a ML910 TM RUGGED xvi NOTEBOOK or radio must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers Keep the antennas of ML910 TM RUGGED NOTEBOOK at least 8 inches (20cm) away from any persons body. Along with ensuring compliance with the RF energy exposure limits (as instructed in the RF Energy Exposure section previously), this separation distance meets or exceeds the distance recommendation of pacemaker manufacturers and the FCC to avoid interference with pacemakers. Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Driver Safety Always abide by the laws and regulations on the use of computers and/or integrated radios in the area where you drive. When using ML910 TM RUGGED NOTEBOOK and/or radio while driving, please:
Give full attention to driving and to the road. Pull off the road and park before using the equipment if driving conditions so require. Operational Warnings For Vehicles with an Air Bag Do not place a ML910 TM RUGGED NOTEBOOK in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a ML910 TM RUGGED NOTEBOOK is placed in the air bag deployment area and the air bag inflates, ML910 TM RUGGED NOTEBOOK may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Turn off your ML910 TM RUGGED NOTEBOOK prior to entering any area with a potentially explosive atmosphere. Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire xvii resulting in bodily injury or even death. The areas with potentially explosive atmospheres referred to above include fuelling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off ML910 TM RUGGED NOTEBOOK when you are near electrical blasting caps, in a blasting area, or in areas posted: "Turn off two-way radio". Obey all signs and instructions. Operational Cautions Antennas Do not use the integrated radios of any ML910 TM RUGGED NOTEBOOK that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury such as burns if conductive materials such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. About the Battery Caution Texts Concerning Lithium Batteries DANISH ADVARSEL!
Lithiumbatteri - Eksplosionsfare ved fejlagtig hndtering. Udskiftning m kun ske med batteri af samme fabrikat og type. Levr det brugte batteri tilbage til leverandren. NORWEGIAN ADVARSEL:
Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. SWEDISH VARNING:
Explosionsfara vid felaktigt batteribyte. Anvnd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera anvnt batteri enligt fabrikantens instruktion. xviii FINNISH VAROITUS:
Paristo voi rjht, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hvit kytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT:
Explosionsgefahr bei unsachgemem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. FRENCH ATTENTION:
II y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type quivalent recommand par le constructeur. Mettre au rebut les batteries usages conformment aux instructions du fabricant. Attention (for USA Users) The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. About the Modem CAUTION:
1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 4. Use caution when installing or modifying telephone lines. 5. Avoid using the telephone function (other than a cordless-type) during an electrical storm. There may be a remote risk of electric shock from lightning. 6. Do not use the telephone function to report a gas leak in the vicinity of the leak. 7. Do not use this product near water, for example near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. xix About the AC Adapter 1. Use only the AC adapter supplied with your computer. Use of another type of AC adapter will result in malfunction and/or danger. 2. Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet. 3. Allow adequate ventilation around the adapter when using it to operate the device or charge the battery. Do not cover the AC adapter with paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. 4. Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging. 5. Do not use the adapter if the cord becomes damaged. 6. Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. xx Table of Contents Preface.................................................................................... xxv Chapter 1 Getting Started..................................................... 1-1 Getting the Computer Running ......................................1-2 Unpacking.................................................................1-2 Installing the Battery Pack ........................................1-2 Initializing the Battery Pack.......................................1-3 Connecting to AC Power...........................................1-4 Opening the Cover....................................................1-5 Turning On and Off the Computer ............................1-5 Taking a Look at the Computer......................................1-7 To fo the Computer ..................................................1-7 Right-Side Components............................................1-8 Left-Side Components ..............................................1-9 Rear Components...................................................1-10 Front Components ..................................................1-11 Bottom-Side Components.......................................1-12 Antenna Location (Intergrated Radio Modems)1-13 Top-open Components ...........................................1-14 Where to Go from Here................................................1-16 Chapter 2 Operating Your Computer................................... 2-1 Starting and Stopping the Computer..............................2-2 Starting the Computer...............................................2-2 Shutting Down the Computer....................................2-2 Using the Keyboard .......................................................2-3 Typewriter Keys ........................................................2-3 Cursor-Control Keys .................................................2-4 Numeric Keypad .......................................................2-4 Euro Symbol .............................................................2-5 Windows Keys ..........................................................2-5 Function Keys ...........................................................2-5 Fn Key.......................................................................2-5 Hot Keys ...................................................................2-6 Using the Touchpad.......................................................2-8 Configuring the Touchpad.........................................2-9 Using the Touchscreen ...............................................2-10 Using the Hard Disk Drive............................................2-11 Using the Optical Disk Drive ........................................2-12 To installing the Optical Disk Drive/2nd HDD/2nd Battery ...................2-12 xxi Removing the Optical Disk Drive/
2nd HDD/2nd Battery...2-13 Inserting and Removing a Disc............................... 2-15 Using the Video Features ............................................ 2-15 Configuring the Display Modes............................... 2-16 Using the Audio Features ............................................ 2-17 Connecting Audio Devices ..................................... 2-17 Using the Communication Features ............................ 2-18 Using the LAN ........................................................ 2-18 Using the Wire Line Modem ................................... 2-19 Using the Wireless LAN ......................................... 2-20 Using the PRM240 Wireless Modem (optional)...... 2-22 Using the GPS (optional)........................................ 2-23 Using the MESH Modem (optional) ........................ 2-24 Using the Bluetooth .............................................. 2-24 Embedded EVDO or UMTS Modem (optional).. 2-25 Chapter 3 Managing Power .................................................. 3-1 AC Adapter .................................................................... 3-2 Battery Pack .................................................................. 3-2 Charging the Battery Pack........................................ 3-2 Initializing the Battery Pack ...................................... 3-4 Checking the Battery Level....................................... 3-4 Replacing the Battery Pack ...................................... 3-5 Battery Low Signals and Actions.............................. 3-5 Power Management ...................................................... 3-6 Hibernation ............................................................... 3-6 ATI PowerPlayTM Management...................................... 3-7 Power-Saving Tips ................................................. 3-10 Chapter 4 Expanding Your Computer ................................. 4-1 Connecting an External Monitor .................................... 4-2 Connecting a USB Device ............................................. 4-3 Connecting a Serial Device ........................................... 4-4 Connecting a Video Capture Device ............................. 4-5 System Memory Upgrade.............................................. 4-6 Chapter 5 BIOS Setup Utility and ML User Application
(MLUA).............................................................. 5-1 When and How to Use the BIOS Setup Utility............... 5-2 When to Use............................................................. 5-2 Starting BIOS Setup ................................................. 5-2 Moving Around and Making Selections .................... 5-2 Main Menu.5-3 xxii Advanced Menu ..5-4 CPU Configuration.. 5-4 Drive Configuration.....5-5 Information Device.. 5-5 Peripherals Configuration.................5-6 System Recovery......................................................5-6 USB Configuration ..................................5-7 Boot Settings ...5-7 Boot Settings Configuration .....5-9 Boot Device Priority..................................................5-9 Security Settings ..5-10 BIOS Password Setup. ..5-10 ML User Application (MLUA).........5-13 ML Administrator Application (MLAA)..........5-15 Chapter 6 Installing Software Drivers ................................. 6-1 How to Use the Driver CD..............................................6-2 Main Menu .....................................................................6-3 Installing Device Driver .............................................6-4 Installing Applications ...............................................6-8 Chapter 7 Caring for the Computer ..................................... 7-1 Protecting the Computer ................................................7-2 Using the Password..................................................7-2 Using an Anti-Virus Strategy.....................................7-2 Taking Care of the Computer.........................................7-3 Location Guidelines ..................................................7-3 General Guidelines ...................................................7-3 Cleaning Guidelines..................................................7-3 Battery Pack Guidelines............................................7-4 When Traveling..............................................................7-7 Chapter 8 Troubleshooting .................................................. 8-1 Preliminary Checklist .....................................................8-2 Solving Common Problems............................................8-3 Battery Problems ......................................................8-4 Bluetooth Problems...................................................8-5 ODD Drive Problems ................................................8-5 Display Problems......................................................8-6 Hardware Device Problems ......................................8-7 Hard Disk Drive Problems.........................................8-7 Keyboard, Mouse, and Touchpad Problems.............8-8 LAN Problems...........................................................8-8 WLAN Problems .......................................................8-9 xxiii Modem Problems .................................................. 8-10 Power Management Problems ............................... 8-10 Software Problems ................................................. 8-10 Sound Problems..................................................... 8-11 Startup Problems.................................................... 8-11 Other Problems ...................................................... 8-11 Resetting the Computer ......................................... 8-12 HDD Recovery Process .............................................. 8-13 Chapter 9 The Accessories List ........................................... 9-1 Chapter 10 The Acronyms and Glossary........................... 10-1 Appendix A Specifications .................................................... A-1 Appendix B Fingerprint Recognition System.B-1 Finger Placement ..........................................................B-2 Fingerprint Recognition .................................................B-3 Appendix C Self Install Internal Wireless Modems.............C-1 Installation of the HSDPA Internal Modem Module .......C-2 Installation of the EVDO Rev. A Internal Modem Module.................................................C-7 Installation of the PRM240 Internal Modem Module....C-11 Appendix D RoHS/WEEE ......................................................D-1 xxiv Preface This user guide contains information that will help you operate the computer. It is divided into 10 chapters and 3 appendices. Chapter 1, Getting Started, takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer, tells you how to use the computers components and features. Chapter 3, Managing Power, provides information on power. Chapter 4, Expanding Your Computer, provides information on installing and using peripheral devices. Chapter 5, BOIS Setup, describes the SCU program that configures the computers BIOS settings. Chapter 6, Installing Software Drivers, describes how to install the drivers and utilities supplied with the computer. Chapter 7, Caring for the Computer, gives you tips in care and maintenance. Chapter 8, Troubleshooting, gives solutions to common problems you may encounter when using the computer. Chapter 9, The Accessories List, give reference components for your replacement. Chapter 10, The Acronyms and Glossary, Let user understand real means of Acronyms when they read User Guide. Appendix A, Specifications, gives a brief specification of the computer. Appendix B, Fingerprint Recognition System, gives a brief safety measures. Appendix C, RoHS / WEEE, World Wide RoHS / WEEE Standard. xxv This page intentionally left blank xxvi CHAPTER 1 Getting Started Congratulations on your purchase of the ML910TM RUGGED NOTEBOOK. This high performance notebook computer is especially designed for the practical applications of warehouses, automobiles, vehicles, public security, repairing, assisting the handicapped, and other demanding situations where conventional notebook computers just cannot measure up. This chapter first tells you step by step how to get the computer up and running. You will find instructions for these procedures:
Unpacking
Connecting to the AC power
Opening the cover
Turning on the computer Turning off the computer
Then, you will find a section briefly introducing the external components of the computer. The last section navigates you to the information you may need after the computer is ready for use. Getting Started 1-1 Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items:
Notebook computer
Accessories:
AC adapter (100~240 VAC, 50/60 Hz) AC power cord (US) Battery CD including Drivers and User Guide Windows XP Operating System CD PCMCIA to Express 34 Card Converter Nero OEM Suite CD Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the computer in the future. Installing the Battery Pack CAUTION:
1. There is danger of damage if the battery is incorrectly installed. 2. Do not attempt to disassemble the battery pack. To install the battery pack, follow these steps:
1. Make sure the computer is not on or connected to the AC power. 2. Loosen the four screws and lift the battery pack compartment cover to take it off the computer. 1-2 Getting Started 3. Insert the battery pack into the compartment. 4. Replace the compartment cover and secure the four screws. Initializing the Battery Pack You need to initialize the new battery pack before using it for the first time or when the actual operating time of a battery pack is less than expected. Initializing is the process of fully charging, discharging, and then charging that can take several hours. 1. Make sure the computer is turned off. Connect the AC adapter to fully charge the battery pack. 2. After the battery pack is fully charged, turn on the computer. 3. Disconnect the AC adapter and leave the computer on until the battery is fully discharged. The computer will shut down automatically. 4. Connect the AC adapter to fully charge the battery pack. Getting Started 1-3 Connecting to AC Power The computer operates on either the external AC power or the internal battery power. We recommend that you use AC power when you start up the computer for the first time. CAUTION:
Use only the AC adapter included with your computer. Use of any other AC adapters may damage the computer. NOTE:
Power Supply Cord:
For US territory: Detachable, minimum 1.8m long. Listed, rated minimum 125V, 2.5A, having a 3/18 AWG, flexible cord. One end terminates with a molded-on, attachments plug with a 10A, 125V (NEMA 515) configuration; other end terminates with a molded-on appliance coupler. For UK territory: Detachable, minimum 1.8m long. Listed, rated minimum 250V, 2.5 A, having a 3/0.75mm2, flexible cord. One end terminates with a molded-on, attachments plug with a3A, 250V (BS1363), and 3 A fuse configuration; other end terminates with a molded-on appliance coupler. 5. Make sure the computer is turned off. 6. Plug the DC cord of the AC adapter to the power connector on the rear side of the computer (). 7. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (). 8. When the AC adapter is connected, the indicator on the AC adapter lights up, indicating that power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer. CAUTION:
1. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer. 2. When unplugging the connector, always hold the plug head. Never pull on the cord. 1-4 Getting Started NOTE:
When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3. Opening the Cover 1. Press the top cover latch 2. Lift up the cover. You can tilt the cover forward or backward for optimal viewing clarity. Turning On and Off the Computer Turning On 3. Make sure the computer has a charged battery or is connected to the AC power supply. 4. Press the power button. Getting Started 1-5 5. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system (such as Windows) should load. Turning Off To turn off the computer safely, use the Shut Down command of your operating system. NOTE:
1. Pressing the power button for 4 seconds or longer will shut the computer off. If the power button is held for 10 seconds or more once the computer is turned off, this will cause the internal controller to reset. 2. There are other ways to turn off the computer that can allow you to return to the state where you left off. Please refer to Shutting Down the Computer in Chapter 2 for more information. 1-6 Getting Started Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. NOTE:
Depending on the model you purchased, the appearance of your computer may not exactly be the same as those shown in this user guide. Top of the Computer Ref Component
Internal Modem Compartment Description Behind the M logo is a compartment which provides the various connection for installing internal modems. See Also C-2 1 Getting Started 1-7 Right-Side Components Component Ref
Security Lock
USB Port Slot
Configurable Media Bay Description See Also Connects an optional security lock to anchor the computer to a desk or other large object. Supports USB 2.0 (i.e. USB High Speed Devices) and Legacy USB Full and Low Speed Devices (i.e. USB 1.1 and US B1.0); and up to 1A load for each USB Port. Accepts an Optical Disc Drive (ODD) for installing or loading software, accessing data, and playing music/video. This bay can also accept the optional second battery or second hard drive. P. 4-3 P. 2-12 1-8 Getting Started Left-Side Components Component Ref
VGA Port
Serial Port
Video Capture
Microphone Connector Port
Audio Output Connector
PC Card Slot Description Connects an external monitor. Connects a RS-232 device. This is a video input port, that can connect to a video capture device. Connects an external microphone. Connects a set of headphones, external speakers with amplifier, or an audio recording device. The audio jack also supports S/PDIF optical standard and is capable of interfacing a mini-toshlink for optical S/PDIF. Accepts a Type II PCMCIA/CardBus card or USB ExpressCard/34 via USB Express Card adapter for additional functions. See Also P. 4-2 P. 4-4 P. 4-5 P. 2-17 P. 2-17 P. A-2 Getting Started 1-9 Rear Components Description Connects the telephone line. Connects the LAN cable. Included a link indicator and an active indicator. See Also P. 2-18 P. 2-18 Serves as the interface between the system and external GPS antenna. P. 2-23 Serves as the interface between the system and antenna of the optional WWAN module. P. 2-22 For connecting to an Office Port Replicator or Vehicle Dock (both are available as an option). Supports USB2.0 (i.e. USB High Speed Devices) and Legacy USB Full and Low Speed Devices (i.e. USB 1.1 and YSB1.0); and up to 1A load for each USB Port. Connects the AC adapter. P. 4-3 P. 1-2 Component Ref
RJ-11 Port
RJ-45 Port
GPS RF Pass-through Port"
WWAN Module RF Pass-through Port"
Docking Port
USB Port 1 USB Port 2
Power Connector CAUTION:
Connection of external antenna (GPS, WWAN) by using the RF Pass-Thru ports when the ML910TM RUGGED NOTEBOOK will be used outside of a car without the vehicle docking station is not an FCC certified configuration. Customers should not configure their systems in this way. 1-10 Getting Started Front Components Component Ref
Stereo Speaker Set
Handle
Top Cover Latch
GPS Antenna
(optional) See Also P. 217 P. 15 P. 223 Description Output stereo audio from the computer. Allows you to carry your computer with an easy grip. Locks the top cover. Serves as an antenna for the Global Positioning System (GPS). It is built into the top cover. Getting Started 1-11 Bottom-Side Components Ref Component Description See Also
Allows you to remove the Optical Disk Drive, Second Battery or Second Hard Drive. Allows you to lock the Optical Disk Drive, Second Battery or Second Hard Drive in place Configurable Media Bay Eject Latch Configurable Media Bay Lock/
Unlock Switch
Hard Disk Drive Compartment
Ventilation Openings
CPU Cooling Fan Contains cooling fan to protect it from overheating.
Memory Contains the memory compartment for expanding the memory size of your computer.
Main Battery Pack Supplies power to your computer when the external power is not connected. Contains the hard disk drive of your computer. Allow for air circulation to prevent overheating and do not cover or block the ventilation openings. Compartment Compartment P. 2-12 P. 2-13 P. 2-11 P. 4-6 P. 2-12 1-12 Getting Started Antenna Location (Integrated Radio Modems) 1 5 4 2 7 43 6 6 Ref Component Description See Also
GPS Antenna For with Optional GPS Receiver
External PCMCIA Antenna Mount Location For WMC6300 & WMC7300
WWAN Antenna 1 Primary TX and RX -- MC8775 and MC5725
WLAN Antenna 1 Primary TX and RX
WWAN Antenna 2 Secondary RX only -- MC5725
WLAN Antenna 2 Secondary RX only
Bluetooth
External PCMCIA Antenna Location WDE1000 NA X NA NA NA NA NA x Getting Started 1-13 Top-Open Components Component Ref
LCD Screen with touch panel Displays the output of the computer. Description Show the current status of the computers devices. Power on: Green color. Standby mode: Amber color. Hard disk drive in-use: Amber color (Blinking). Hard disk heater is on: Red color (Blinking). Device Indicators
See Also P.2-9 P. 3-2 & 3 P. 2-11 1-14 Getting Started Ref Component Description See Also
Power Button
Keyboard Battery charging indicator. Battery full: Glows green. Battery charging: Glows amber. Battery low: Red (Blinking). AC indicator. Glows green when the computer is connected to AC power. Turns your computer ON or OFF. Serves as the data input device of the computer.
Fingerprint Scanner Contains the fingerprint scanner. Device Indicators Show the current status of the computers devices.
Touchpad indicator Glows green (or red) when the touchpad is enabled press Fn+F2 to toggle the touchpad on/off. (or disabled). Num Lock indicator. P. 2-3 Caps Lock indicator. P. 2-3 P.3-3 P. 1-4 or P. 3-2 P. 1-5 P. 2-3 P. B-1 P. 2-8
Light Sensor Detects ambient light and automatically turns on/off the keyboard backlight function. Hot keys: Fn+F1. P. 2-3 P. 2-5
Touchpad / Touchpad Buttons Serves as the pointing device of the computer. P.2-7 Getting Started 1-15 Where to Go from Here As your computer is ready for operation, you may want to do any of the following now:
For this purpose Do this To know more about the computer To install the operating system if your dealer has not already done so To know more about the operating system To install the drivers if your dealer has not already done so To set a power-on password To charge the battery pack for the first time Go on to the next chapter. See the operating system manual. Read the operating system manual. See Chapter 6. See Security Settings in Chapter 5. See Charging the Battery Pack in Chapter 3. 1-16 Getting Started CHAPTER 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn your computers basic operations. If you are already a computer user but are new to notebook computers, you may choose to read only the parts containing information unique to your computer. This chapter describes the following components:
Keyboard Touchpad Touchscreen
Hard disk drive
Optical disk drive And these features:
Starting and shutting down the computer
Video features
Audio features
Communication features Operating Your Computer 2-1 Starting and Shutting Down the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk; or from a CD if you have the respective modules installed. The computer will automatically load the OS after you turn it on. This process is called booting. NOTE:
An operating system is the platform for all your software application programs to run on. The most widely used operating system today is Microsoft Windows. CAUTION:
Do not use a sharp object such as a ballpoint pen or pencil on the power button. Doing so may damage the power button surface. Shutting Down the Computer When you finish a working session, you can stop the computer by turning off the power or leaving the computer in Standby or Hibernation mode:
To stop in this mode Off Standby Do this Follow the shutdown procedure of your operating system. This can prevent loss of unsaved data or damage to your software programs. If the system locks up because of hardware or software problems, press the power button to turn off the computer. Depending on your Windows settings, you can place the computer in Standby mode by:
Closing the display cover Pressing the power button you can place the computer in Hibernation mode by:
Closing the display cover Pressing the power button To start up or resume again Press the power button. Press any key. Press the power button. Hibernation Depending on your Windows settings, 2-2 Operating Your Computer NOTE:
1. Placing your computer in Standby or Hibernation mode allows you to return to the tasks you were doing the next time you start up the computer. (See Power Management in Chapter 3 for more information.) 2. Pressing the power button for 4 seconds or longer will shut the computer off. If the power button is held for 10 seconds or more, once the computer is turned off, this will cause the internal controller to reset. CAUTION:
Using the power button to shut down the computer can cause damage to the OS when shutting down. Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard with an additional Fn key for specific functions. The standard functions of the keyboard are divided into four major categories:
Typewriter keys
Cursor-control keys
Numeric keys
Function keys Typewriter Keys Typewriter keys are similar to the keys on a typewriter. Several keys that are not found on the typewriter, such as the Ctrl, Alt, Esc, and lock keys, are added for special purposes. When the lock keys (Caps Lock, Num Lk, and Scroll Lk) are pressed, their corresponding indicators will light up. Operating Your Computer 2-3 Cursor-Control Keys NOTE:
1. The word cursor refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. 2. It can take the form of a vertical or horizontal line, a block, or one of many other shapes. Numeric Keypad A 15-key numeric keypad is embedded on the typewriter keys as shown next:
Numeric keys facilitate the entering of numbers and calculations. When Num Lock is turned on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE:
1. When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press Fn and then the letter without turning Num Lock off. 2. Some software may not be able to use the numeric keypad on the computer. If so, use the numeric keypad on an external keyboard instead. 2-4 Operating Your Computer Euro Symbol For the Euro dollar sign On an UK keyboard, hold down the Alt Gr key and press 4 (which has a Euro sign on it).
Windows Keys The keyboard has two keys that perform Windows-specific functions:
Windows Logo key and Application key. Windows Logo key opens the Start menu and performs software-specific The functions when used in combination with other keys. The manual for more information.) Application key has the same effect as a right mouse click. (See your Windows Function Keys On the top row of the keyboard are the function keys: F1 to F12. Function keys are multi-purpose keys that perform operations defined by the individual programs. Fn Key The Fn key, located at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter Fn and the alternative functions are identified by the blue colored labels on the key top. To perform a desired function, first press and hold Fn, then press the other key. Operating Your Computer 2-5 Hot Keys Hot keys refer to a combination of keys that you can press at any time to activate special functions of the computer. Most hot keys operate in a cyclic way. Each time a hot key combination is pressed, it shifts the corresponding function to the other or next choice. You can easily identify the hot keys with the icons imprinted on the key top. Refer to the table below to understand the functions of the hot keys:
Key Description Enables/Disables the keyboard backlight function. Enables/Disables the Touchpad. Decreases the sound volume. Increases the sound volume. 1. Fn+F5: going to decreases the LCD brightness. 2. Fn+F6: going to increases the LCD brightness. 3. There are 5 levels of LCD brightness.
(0 is no backlight) 2-6 Operating Your Computer Key Description Fn+F7 hotkey turn on/off all wireless devices. i.e. WLAN, WWAN, GPS and Bluetooth. Switches the LCD off and on. Switches the display output when an external device is connected. This is a circular change i.e. LCD to CRT to CRT and LCD back to CRT. Serves as the sleep button that you can define with Windows Power Management. (See the Power Management in Chapter 3.) Switches the LCD backlight on and off. Switches the Optional GPS Receiver on and off. Operating Your Computer 2-7 Using the Touchpad CAUTION:
1. Do not use a sharp object such as a pen on the touchpad. 2. Doing so may damage the touchpad surface as well as for RUBBER part of the touchpad section. NOTE:
1. By default, the touchpad is enabled. Use the Fn+F2 hot keys to enable/disable this function. The touchpad indicator found on the keyboard panel glows red when it is disabled. 2. For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons. The touchpad consists of a rectangular pad and four buttons. To use the touchpad, place your forefinger or thumb on the pad. The rectangular pad acts like a miniature duplicate of your display. As you slide your fingertip across the pad, the pointer (also called cursor) on the screen moves accordingly. When your finger reaches the edge of the pad, simply lift the finger and place it on the other side of the touchpad. Here are some common terms that you should know when using the touchpad:
Term Point Move your finger on the pad until the cursor points to the selection on the screen. Action Click Double-click Press and release the left button twice in quick succession. Press and release the left button. or Tap gently anywhere on the pad. or Tap twice on the pad rapidly. 2-8 Operating Your Computer Term Drag and drop Scroll Action Press and hold the left button, then move your finger until you reach your destination (drag). Finally, release the button (drop) when you finish dragging your selection to the destination. The object will drop into the new location. or Gently tap twice on the pad and on the second tap, keep your finger in contact with the pad. Then, move your finger across the pad to drag the selected object to your destination. When you lift your finger from the pad, the selected object will drop into place. To scroll is to move up and down or left and right in the working area on the screen. The scroll button located between the two buttons under the touchpad can be used to move vertically in a convenient way. Press the upper part of the scroll button to move up and the lower part of the scroll button to move down. or To move vertically, place your finger on the right edge of the pad and slide your finger up and down along the edge. To move horizontally, place your finger on the bottom edge of the pad and slide your finger left and right. This function works only after you install the touchpad driver supplied with the computer and it may not work for all applications. NOTE:
If you swap the left and right buttons, tapping on the touchpad as an alternative method of pressing the left button will no longer be valid. Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on. NOTE:
1. The touch pad is pressure sensitive. 2. The presence of a foreign object on the touch pad may cause the cursor to move erratically. 3. Use an optical cleaning kit such as a bower brush to remove any such objects. Operating Your Computer 2-9 Using the Touchscreen CAUTION:
Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. NOTE:
1. The touchscreen is pressure sensitive. The presence of a foreign object on the touchscreen may cause the cursor to move erratically. 2. Use an optical cleaning kit such as a bower brush to remove any such objects. The touchscreen is a touch-sensitive device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection. The touchscreen allows you to use the computer without a mouse or touchpad. Here are some common terms that you should know when using the touchscreen:
Term Click/Point Double-click Drag and drop Action Tap gently on the touchscreen. Tap twice on the touchscreen rapidly. Press lightly on the touchscreen and move your finger until you reach your destination (drag). Finally, release your finger (drop) when you finish dragging your selection to the destination. The object will drop into the new location. 2-10 Operating Your Computer Using the Hard Disk Drive Your computer comes with a 2.5-inch Serial-ATA hard disk drive. A hard disk drive is a storage device where your operating system and application programs are stored. This type of drive embodies the latest in fast, reliable mass storage by integrating all the control circuitry necessary for operation directly onto the drive itself. This allows the drive manufacturer to optimize the performance of the drive. The system comes with a built-in heater that automatically turns on during low temperature operation. The HDD-heater-on indicator blinks red when the heater is on. In low temperature environments, you should operate the system using AC power to conserve battery power. CAUTION:
1. Make regular backups of your data files from the hard disk drive to CDs or other storage media. 2. Never try to remove or install the hard disk drive while the computer is powered on. Doing so can result in loss of data, and can damage the computer and the hard disk drives sensitive circuitry. 3. Never turn off or reset the computer while the hard disk drive in-use indicator is on. Operating Your Computer 2-11 Using the Optical Disk Drive Your computer (model-dependent) comes with a optical disk drive located on the right side of the computer in the configurable media bay. Depending on the model of your computer, the drive may be one of the following:
DVD drive reads DVD (Digital Versatile Disc) discs in addition to CDs, audio CDs, CD-R, and CD-RW discs.
CD-RW/DVD Combo drive works both as a DVD drive and CD-RW drive.
DVD-RW Dual drive aside from working as a Combo drive, it can also write to DVDRW (+R DL), DVD-R, DVD+R, DVD-RAM, CD-R & CDRW discs. NOTE:
1. If you are using the optical disk drive for more than half an hour (e.g. playing a DVD title), it is recommended to use the AC power source instead of the battery. 2. If not, the battery may run out of power before you can complete your multimedia task. CAUTION:
1. When inserting a disc, do not use force. 2. Make sure the disc is correctly inserted into the tray, before closing the tray. 3. Do not leave the optical disk tray open unnecessarily. Also, avoid touching the lens in the tray with your hand. If the lens becomes dirty, the drive may malfunction. 4. Do not wipe the lens using materials with rough surface (such as paper towel). Instead, use a cotton swab to wipe the lens gently. 5. FDA regulations require the following statement for all laser-based devices. 6 Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 7. The optical disk drive is classified as a Class 1 laser product. This label is located on the optical disk drive. To install the Optical Disk Drive/2nd HDD/2nd Battery:
1. Insert the optical disk drive/2nd HDD/2nd Battery into the configurable media bay located on the right side of the computer. 2-12 Operating Your Computer 2. Slide the multipurpose bay lock/unlock switch to the lock position to secure the optical disk drive/2nd HDD/2nd Battery in place. 3. Tighten the positioning screws to lock the optical disk drive/2nd HDD/2nd Battery in place. Removing the Optical Disk Drive/2nd HDD/2nd Battery To remove the optical disk drive/2nd HDD/2nd Battery:
1. Remove the two positioning screws from the base. Operating Your Computer 2-13 2. Open the door of the configurable media bay on the right side of the computer. 3. Push to release the lock/unlock switch. 4. Push the Eject icon switch to remove the optical disk drive/2nd HDD/2nd Battery. Warning:
1. Without the two positioning screws locked on the base, the unit will no longer be waterproof and will be more susceptible to damage if dropped. 2. The optical disk drive (or any other secondary kit i.e. 2nd HDD/2nd Battery) needs to be replaced back in the unit for positioning screws to lock on. 2-14 Operating Your Computer Inserting and Removing a Disc Follow this procedure to insert or remove a disc. 1. Turn on the computer. 2. Press the eject button and the optical disk drive tray will slide out partially. Carefully pull it out until fully extended. 3. To insert a disc, place the disc in the empty tray with its label facing up. Gently press the center of the disc until it clicks into place. To remove a disc, hold the disc by its outer edge and lift it up from the tray. 4. Gently push the tray back into the drive. NOTE:
In the unlikely event that you are unable to release the optical disk drive tray by pressing the eject button, you can manually release the optical media. (See Optical Disk Drive Problems in Chapter 8.) Using the Video Features The video subsystem of your computer features:
13.3-inch Display:
13.3-inch TFT (Thin-Film Transistor) color LCD display with 1280800 WXGA (Wide extend Graphics Array) resolution.
128 MB discrete video memory.
Simultaneous display on LCD and external monitor, which is useful when you have a presentation as you can control the screen from your computer and face the audience at the same time.
Dual view capability that allows you to extend your desktop to another display device so you have more desktop space to work on. Operating Your Computer 2-15
Power Management.
Polarizer touchscreen function. NOTE:
System enters Standby/Hibernation mode when the LCD is closed. If you want to use the computer with the LCD closed, set Do Nothing to the When I close the lid of my portable computer option in the Power Options Properties. Thus, the computer will not enter Standby or Hibernation mode when the LCD is closed. Configuring the Display Modes Your computer has been set to a default resolution and number of colors before shipment. You can view and change display settings through your operating system. See your operating system documentation or online help for specific information. For displaying in higher resolutions, you can connect an external monitor that supports higher resolutions. (See Connecting an External Monitor in Chapter 4 for more information.) The following table lists the display modes supported by your computer. Display Mode Resolution Colors LCD Only CRT Only Simultaneous Display 800600 1024x600 1024768 1280x720 1280x768 1280x800 16-bit 32-bit 16-bit 32-bit 16-bit 32-bit 16-bit 32-bit 16-bit 32-bit 16-bit 32-bit
NOTE:
1. 16-bit = High Color or 65,536 (64 K) colors; 32-bit = True Color 16,770,000 (16 M) colors. 2. When using an external monitor only, the resolution depends on the resolution supported by the external monitor. 2-16 Operating Your Computer Using the Audio Features NOTE:
1. To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed (see chapter 6 for details). 2. If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer features:
Recording analog audio
Digital audio and analog mixing functions and playing sound on your computer
Microsoft Windows Sound System support
A set of built-in speakers ()
External audio connectors () Modes of playing and recording sound vary with the operating system used. See your operating system documentation or online help for specific information. Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices.
Microphone Connector (
recording voice or sound.
) can be connected to an external microphone for
Audio Output Connector (
) can be connected to the line-in connector of powered speakers with built-in amplifiers, headphones, or earphone set. The audio jack also supports S/PDIF optical standard and capable of interfacing a mini-toslink for optical S/PDIF. NOTE:
When using external speakers/headphones, the internal speakers will be disabled. Operating Your Computer 2-17 Using the Communication Features Using the LAN The internal 10/100/1000 Base-T Ethernet LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. When the ML910TM RUGGED NOTEBOOK is used in a Vehicle Docking Station or Office Port Replicator the data rate transfer will only be 10/100 Mbps. To connect the network cable to the LAN module, plug in one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub. Link Indicator Glows green when the system has an Active Indicator available connection to LAN. Blinks amber when the system is accessing the LAN. Active indicator
(Amber blinking) Link indicator
(Green) 2-18 Operating Your Computer Using the Wire line Modem The internal 56K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or web browser. Connect one end of the RJ-11 telephone cable to the modem port and the other end to the phone line. Operating Your Computer 2-19 Using the Wireless LAN Your computer may have an internal PCIe (PCI Express) Mini Card network adapter
(WLAN) pre-installed by the computer manufacturer. This card allows you to access corporate networks or the Internet in a wireless environment. Features Band Supported Data rates Radio Frequency Channel Number Network Authentication CCX Version Mandatory Access Point Module 3945ABG for ML910 TM RUGGED NOTEBOOK Indicates the wireless band of the current connection Rates at which the wireless adapter can send and receive data. Displays the speed in Mbps or the frequency being used. 802.11a - 6, 9, 12, 18, 24, 36, 48 and 54mbps 802.11b- 1, 2, 5.5 and 11 802.11g- 1, 2, 5.5 and 11 Display the frequency of the current wireless connection. 2.4 GHz 5 GHz Displays the transmit and receive channel. WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise. Version of the Cisco Compatible Extensions on this wireless connection. Cisco Compatible Extensions Power Levels. 1.0, 5.0, 20.0, 31.6, 50.1 mW access point. Display None, if not enabled. If enabled, from the access point MAC address is displayed. This option directs the wireless adapter to connect to an access point that uses a specific MAC address(48bit 12 hexadecimal digits, for example, 00:06:25:0E:9D:84) CCX TPC CCX Power Levels Access Point MAC Address The Media Access Control (MAC) address for the associated CAUTION:
The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless devices in aircraft as this may interfere with flight safety. Remember to turn off wireless LAN when using your computer in the airplane. Connecting to a Wireless Network 1. Double-click the Intel PROSet/Wireless Software icon system tray. The following window appears on screen:
NOTE:
If the "Intel(R) PRO/Wireless Network connection is disabled, press Fn+F7 to enable it. located on the Windows 2-20 Operating Your Computer 2. Select a wireless network to connect to, and then click Connect. 3. You may be asked to enter a key or pass phrase if a network security setting is enabled. Refer to your Windows online help for more information on setting a wireless network connection. Operating Your Computer 2-21 Using the PRM240 Wireless Modem (Optional) The PRM240 is a radio modem intended for use on Motorola's Private DataTAC data communications network. It is primarily designed to be integrated into the customers equipment as an OEM modem. There are two versions availablean 800MHz version (A band) and a 900 MHz version (B band). The modem interfaces to the equipments controller by using the data interface port. The protocol supported over this link is a Native Control Language (NCL). Although the modem has embedded software, it also has the application software that must be installed separately in order for the device to which the modem is connected to communicate with it. NOTE:
Please refer to your PRM240 user manual for more information on the installation and configuration of the modem. The PRM240 modem has the following features:
Serial communications interference port (TTL level) Four configurable digital Input/output lines for external control/monitoring Software configurable RF calibration adjustments to suit specific networks High sensitivity reception Small footprint and low profile design Low-voltage and low standby current consumption for battery based products Auto-wake up of host on incoming messages Roaming capabilities as used in DataTAC network Easy to install, service and update 2-22 Operating Your Computer Using GPS (Optional) Navigation and positioning are crucial to many activities and yet the process has always been quite cumbersome. With GPS technology, you can now figure out where you are and where you are going. Global Positioning System (GPS) is a worldwide radio-navigation system formed from a constellation of 24 satellites and their ground stations. GPS uses these "man-made stars" as reference points to calculate positions accurate to a matter of meters. In fact, with advanced forms of GPS you can make measurements to better than a centimeter!
In a sense, it is like giving every square meter on the planet a unique address. Five broad categories of GPS application:
Location determining a basic position
Navigation getting from one location to another
Tracking monitoring the movement of people and things
Mapping creating maps of the world
Timing bringing precise timing to the world NOTE:
1. The basis of GPS is "triangulation" from satellites. 2. To "triangulate," a GPS receiver measures distance using the travel time of radio signals. 3. To measure travel time, GPS needs very accurate timing. 4. Along with distance, you need to know exactly where the satellites are in space. High orbits and careful monitoring. 5. Finally you must correct for any delays the signal experiences as it travels through the atmosphere."
Operating Your Computer 2-23 Using the MESH Modem (Optional) Motorola's MESH networking technology enables users to wirelessly access critical broadband applications seamlesslyanytime and anywhere. Whether utilizing pre-deployed infrastructure or an instant, adhoc broadband network formed with other users, Motorola's MESH networking technology delivers real-time data to detect, prevent and respond. Key features of MESH include:
Advanced Encryption Standard (AES) Support for Wi-Fi Clients. Layer 2 Multicast Support. Network Time Protocol (NTP) Support. Differentiated Services using IP quality of Service (QoS) Support. Over-the-Air Software upgrade Support. MAC Access Control lists. Web (HTTP) based management interface. SNMP agent for remote management. Firmware Upgrades via TFTP. The following MESH modems are supported:
WMC6300, WMC7300 & WDE1000 NOTE:
1. Please refer to your MESH modem user manual for more information on installation and configuration of the modem. 2. Refer to Page x of this manual for external antenna placement. CAUTION:
MESH cards are EXTERNAL to the computer and when used they are not water/humidity/dust proof since the rubber door is open. Using the Bluetooth Your computer is equipped with a Bluetooth Class 2 device that is compliant with Bluetooth specification V2.0 to ensure interoperability between other electronic devices supporting Bluetooth technology, check with the manufacturers of those electronic devices to determine their compatibility with your computer. NOTE:
1. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. 2. Features using Bluetooth technology, or allowing such features to run in the background increase the demand on battery power and reduces the battery life. Bluetooth technology enables wireless connections between electronic devices. A Bluetooth connection can be used to send files or to connect wirelessly to compatible devices such as cellular phones and PDAs using Bluetooth technology. 2-24 Operating Your Computer Since devices using Bluetooth technology communicate using radio waves, your computer and the other devices do not need to be in direct line-of-sight. Your computer and the other device only need to be within a maximum of 10 meters of each other, although the connection can be subject to interference from obstructions such as walls or from other electronic devices. Embedded EVDO REV. A or HSDPA Modem (Optional) Your ML910TM RUGGED NOTEBOOK may be equipped with an embedded EVDO REV. A or HSDPA carrier modem to provide data connectivity via a cellular service provider. Embedding the carrier modem card ensures connectivity without exposing components to outside environmental hazards such as water, dust, sand, humidity, and the long-term affects of extreme temperatures. The ML910 TM RUGGED NOTEBOOK carrier modem solution also includes embedded antennas to provide consistent data service in even the most hazardous conditions. An external antenna pass-through option is also available for rural areas with little connectivity or those with significant interference. Pass-through allows the user maximum coverage in any environment. Please refer to your carriers connection service software to verify activation, connectivity and system settings. The ML910 TM RUGGED NOTEBOOK integrates data only cellular radio modules that use radio signals and cellular networks which cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless device for essential communications. Operating Your Computer 2-25 This is page is intentionally left blank. 2-26 Operating Your Computer CHAPTER 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how to manage power effectively. In order to keep the optimal performance of battery, it is important to use the battery properly. The topics in this chapter include:
What is an AC adapter.
How to charge the battery pack.
When and how to initialize the battery pack.
How to check the battery level.
How to replace the battery pack.
What happens when the battery is low and what actions to take.
What is Power Management.
How to save power. Managing Power 3-1 AC Adapter CAUTION:
1. The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. 2. The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer for the appropriate power cord. 3. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or computer. 4. When unplugging the connector, always hold the plug head. Never pull on the cord. When connected to AC power, the AC adapter converts from AC (Alternating Current) to DC (Direct Current) power for use by your computer and also charges the battery pack. The AC adapter operates on any voltage in the range of 100 ~ 240 V AC. Battery Pack The battery pack is an internal power source for the computer and is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you use the computer. If your applications often access peripherals, you will experience a shorter operating time. In low or high temperature environments, you are recommended to operate the computer using the AC power. NOTE:
Care and maintenance information for the battery is provided in the Battery Pack Guidelines section in Chapter 7. Charging the Battery Pack NOTE:
1. Charging will not start if the batterys temperature is below 0C (32 F) or above 45 C (113 F). 2. The thermal protection of battery pack is 60 C (140F) for the discharge mode. In any case, once the temperature of battery pack reaches 60C (140F), the battery pack will shut off the output immediately, this means the battery will stop discharging. If this happens, the computer must be connected to external power before attempting to restart. 3. The battery will not discharge if the temperature is lower than 20C (4F) or higher than 4. During charging, it is not recommended to disconnect the AC adapter before the battery has been fully charged; otherwise you will not get a fully charged battery. 5. The absolute highest temperature for the battery pack is 85C (185F), this temperature will result in irreversible damage and permanent disabling of the pack. 6. Permanent damage can occur at temperatures above 60C (140F) and should be avoided 60C (140F). if possible. 3-2 Managing Power CAUTION:
1. Batteries in ML910 RUGGED NOTEBOOK are allowed to discharge when the battery temperature is from 20C (4F) to 60C (140F) and allowed to be charged when its temperature is ranging from 0C (32F) to 45 C (113 F). 2. These batteries are not allowed to operate outside of this range. When the ML910 RUGGED NOTEBOOK is operating at extreme temperature and the battery is out of the operating range, an external power supplies is required to be connected to allow continued operation of the ML910 RUGGED NOTEBOOK unit. To charge the battery pack, connect the AC adapter to the computer and the electrical outlet. The Battery status indicator (
) will light amber when battery is charging, and green when the battery is fully charged . The Battery low indicator will blink red when battery capacity is below 10 percent. It takes approximately 180 minutes (3 hours) to charge the battery pack when the computer is off and 240 minutes (4 hours) to fully charge the battery pack when the computer is on. CAUTION:
After the battery has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may reduce the life of the battery. NOTE:
1. The battery level may automatically lessen due to the self-discharge process (0.21% per day), even after the battery pack has been fully charged to 100%. This will happen whether the battery pack is installed in the computer or not. 2. The discharge will be significantly higher if the pack is stored in the computer with no external power connected. Initializing the Battery Pack You need to initialize the new battery pack before using it for the first time or when the actual operating time of a battery pack is less than expected. Initializing is the process of fully charging the pack and may take several hours. 1. Make sure the computer is turned off. Connect the AC adapter to fully charge the battery pack. 2. After the battery pack is fully charged, turn on the computer. Checking the Battery Level NOTE:
The battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the computer. Managing Power 3-3 You can check the approximate battery level using the battery meter function of the operating system. To read the battery level in Windows, click the
(Click the icon if the computer is using AC power.) icon on the taskbar. Replacing the Battery Pack CAUTION:
1. There is danger of damage if the battery is incorrectly replaced. 2. Replace the battery only with the computer manufacturers optional battery packs. 3. Discard used batteries according to the dealers instructions. 4. Do not attempt to disassemble the battery pack. If you often rely on battery power for long periods of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To replace the battery pack, follow these steps:
1. Make sure the computer is not on or connected to the AC power. 2. Loosen the four screws and lift the battery pack compartment cover to take it off the computer. 3. Pull on the ribbon and remove the battery pack from the computer. 4. Insert the new battery pack into the compartment. 5. Replace the compartment cover and secure the four screws. 3-4 Managing Power Battery Low Signals and Actions Battery Low occurs when the battery has approximately 10% (Windows default setting) of its charge remaining. The computer gives warning beeps or messages and the Battery Power Indicator (
) blinks red to alert you to take actions. NOTE:
You can set up your threshold and signals of Battery Low under Windows. Immediately save your data upon Battery Low. The remaining operating time depends on how you are using the computer. If you are using the audio subsystem, hard drive or DVD/Combo/DVD Dual drives, the battery may run out very quickly. Always respond to Battery Low by placing your computer in Standby or Hibernation mode, turning off the computer, or connecting the AC adapter. If you do not take any action, the computer will automatically hibernate and turn off. CAUTION:
If you fail to save your data when the battery completely runs out of charge, then your unsaved data will be lost. Managing Power 3-5 Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows XP, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows power management works in this way:
What When Power to the hard disk is turned off Power to the display is turned off When the display has been idle for When the hard disk has been idle for a set period. The computer enters Standby mode. The hard disk and display are turned off and the entire system consumes less power. The computer enters Hibernation mode. (See the next subsection for more information.) a set period. When the entire system has been idle for a set period. When you press Fn+F10. *
When you close the cover. *
When you press the power button. *
When you press the power button. *
When you press Fn+F10. *
When you close the cover. *
* depends on your Windows settings. For detailed information on power management, see Windows Help. Power management settings should not be completely disabled. Generally, users will not see significant benefit by setting hard drive shutdown times of greater than a few minutes. When ML910 Rugged Notebook is intended for in vehicle use it is recommended that hard drive power down be set at 1 minute to prevent premature failure of hard-drive. CAUTION:
Do not disable power management if system will be used in extreme temperatures or high vibration environments (e.g.: vehicles. Hibernation When you use the hibernation feature, you do not have to close the applications and documents that are running on the computer. The computer stores the state of your computer to a file on the hard disk before shutting down. The next time you turn on your computer, you return to exactly where you left off. 3-6 Managing Power ATI PowerPlayTM Management PowerPlayTM manages the power requirements of your graphics settings for higher performance or longer battery life. Use PowerPlayTM to balance performance and power consumption. When you bought the notebook from Motorola or Motorolas Agencies, PowerPlayTM is the fixed default value by driver of the graphics card which can be adjusted under the Enable PowerPlayTM procedure. Access to PowerPlayTM 1. Start notebook and click on the ATI Catalyst Control Center symbol. 2. You will see the following screen once youve accessed the ATI Catalyst Control Center program. Managing Power 3-7 3. Click the Next key to proceed to the next step for system access. NOTE:
This following will only happened the first time you access to Catalyst Control Center only, Functions of PowerPlayTM Enabling PowerPlayTM You can adjust the AC mode and battery mode to reduce the power consumption under the Enable Power Play Function 1. From the Graphics Settings tree, click PowerPlayTM. 2. Click Enable PowerPlayTM 3. You will see the following screen :
3-8 Managing Power Please check the function of Enable POWERPLAY when you access the PowerPlayTM program. Select your preferred settings depending on power source The default power settings can be changed to meet your performance to power requirements. 1. From the Graphics Setting tree, click PowerPlayTM. 2. Click and drag the slider next to the relevant power source to the desired setting. Set low battery level PowerPlayTM can automatically change to low power consumption settings. NOTE:
This option is not available on system running Windows Vista. 1. 2. Click the up or down buttons next to Low Battery settings to a desired battery power level From the Graphics Settings tree, click PowerPlayTM. percentage. 3. Optionally, enter a value in the power percentage value box. Managing Power 3-9 Power-Saving Tips In addition to your computers automatic power management, you can do your part to maximize the batterys operating time by following these suggestions. 1. Do not disable Power Management. 2. Decrease the LCD brightness to the lowest comfortable level. 3. Disable the serial port if no device is connected to this port. (See Advanced Settings in Chapter 5.) 4. If you work with an application that uses the serial port or features wireless connectivity (LAN/WLAN/modem/GPS/Bluetooth), exit the application when you finish using it. 5. Turn off the computer when you are not using it. 3-10 Managing Power CHAPTER 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and using these devices:
External monitor.
USB device.
Serial device.
Video source.
System Memory Upgrade. Expanding Your Computer 4-1 Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external monitor that supports VGA interface to your computer. Follow this procedure to connect an external monitor:
1. Make sure that the computer is not turned on. 2. Plug the monitors signal connector to the computers VGA port. 3. Plug one end of the monitors power cord into the power socket on the monitor and the other end to an electrical outlet. 4. To use the monitor, switch on the monitor before turning on the computer. 5. The monitor should respond by default. If not, you can switch the display to the monitor or to both (simultaneous display), or to multi-display by pressing Fn+F9. In Windows, you can also change the display through the settings in Display Properties. 6. You can change display settings through your operating system. See your operating system documentation or online help for specific information. CAUTION:
Do not disconnect the external monitor while the computer is in Standby mode or Hibernation mode. If no external monitor is connected when the computer resumes, the LCD remains blank and the output is not displayed. 4-2 Expanding Your Computer Connecting a USB Device Your computer has three USB ports that support transfer rates of up to 12 Mbps for USB 1.1 devices and 480 Mbps for USB 2.0 devices, such as digital camera, scanner, printer, modem, and mouse. USB is specified to be an industry standard extension to the PC architecture. It supports Plug-and-Play technology so you can install and remove USB devices without turning off the computer. With its multiple connection capability, up to 127 devices can be connected in a daisy-chain configuration. In addition, you can use a USB hub that converts a single USB connector into multiple ports where USB devices can be connected. To connect a USB device, simply plug the device cable into one of the USB ports with the USB converging arrows symbol facing up. Expanding Your Computer 4-3 Connecting a Serial Device Your computer has a serial port for connecting a serial device such as an external modem. Follow this procedure to connect a serial device:
1. Plug the device cable to the serial port on the left side of the computer. 2. Turn on the computer. NOTE:
Portable modems that derive power through the serial port cannot be used with the computer. Instead, use a modem that is powered by its own internal battery or external AC power. 4-4 Expanding Your Computer Connecting a Video Capture Device Your computer has a video capture port for connecting a video source such as high-quality CCD, as well as consumer electronic equipment such as DVCAM and VCR. To connect a video capture device, simply plug the device cable into the video capture port of the computer. Expanding Your Computer 4-5 System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 2 GB on the two 200-pin DDR2 SO-DIMM slots. However, to avoid damage during the installation procedure, please ask your dealer for help. 4-6 Expanding Your Computer CHAPTER 5 BIOS Setup Utility and ML User Application (MLUA) BIOS Setup Utility is a program for configuring the BIOS (Basic Input/Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. The ML User Application or MLUA is designed for users to configure the parameters of various functions in the notebook. By using these configuration parameters, you can change the default configuration that automatically loads when you turn on the computer. ML User Application is automatically launched every time you boot your notebook into Windows Operating System, this can be indicated by the ML User Application icon on the taskbar. Double-click on the ML User Application icon will bring up the application window. Every time you start the ML User Application, the current configuration parameters saved in Embedded Controller is loaded and displayed in the ML User Application window. This chapter tells you how to use the BIOS Setup Utility and provide you with some of the basic information related to the MLUA BIOS Setup Utility & MLUA 5-1
1 | Users Manual 2 | Users Manual | 2.04 MiB | March 10 2007 |
When and How to Use the BIOS Setup Utility When to Use You need to run the BIOS Setup Utility when:
You see an error message on the screen requesting you to run Setup.
You want to restore the factory default settings.
You want to modify some specific settings according to the hardware.
You want to modify some specific settings to optimize system performance. Starting BIOS Setup NOTE:
1. The Setup screens shown in this chapter are for your reference only. The actual items or settings on your computer may differ. 2. The Setup utility may have been updated after the publication of this user guide. 3. The settings you select in your operating system might override similar settings in the Setup. To run BIOS Setup, press F2 when the prompt appears in the lower left corner of the screen during system startup. The prompt shows up on the screen for only a few seconds. You must press F2 quickly. The BIOS Setup menu appears as shown next. Moving Around and Making Selections A brief description of keyboard usage is listed next:
5-2 BIOS Setup Utility & MLUA Key F1 F2 F9 F10 Enter Tab Esc Main Menu Function General Help General Help Load optimal defaults Save and Exit Select Screen Select Item Change Field/Option 1) Brings up the sub-menu when available. 2) Opens or closes the options window when an item is selected. Jumps from one item to another. 1) Exits the BIOS Setup Utility. 2) Returns to the previous menu if in a sub-menu. 3) Closes the options window if one is open. BIOS Setup Utility & MLUA 5-3 Advanced Menu CPU Configuration Setup function of Intel SpeedStep Technology: Under the slide of Advanced, use key to move cursor on the string of Intel SpeedStep Technology and you will find the option of Maximum, Minimum, Automatic & Disabled on the right top corner of screen.
Maximum: CPU speed is set to maximum.
Minimum: CPU speed is set to minimum.
Disabled: Use default CPU speed. Automatic: CPU speed is controlled by OS. 5-4 BIOS Setup Utility & MLUA Drive Configuration While entering setup, BIOS auto detects the presence of devices. This displays the status of auto detection of devices. Information of Device BIOS Setup Utility & MLUA 5-5 Peripherals Configuration Enables or disables the feature of Peripherals Configuration:
Under the slide of Advanced, use key to move cursor on the string of peripherals and enable or disable peripherals configuration as you need. System Recovery 5-6 System Recovery Hotkey:
Enable or Disable System Recovery Hotkey by (Ctrl+F9). System Recovery Password:
The BIOS support the recovery of the HDD with a Ctrl+ F9 during POST by using one to six character password. BIOS Setup Utility & MLUA Set and Change Password:
Select Change Password from the System recovery password Setup menu and press
<Enter>. Enter New Password:
Appears. Type the password and press <Enter>. The screen does not display the characters entered. Retype the password as prompted and press <Enter>. If the password confirmation is incorrect, an error message appears. The password is stored in NVRAM after completes. USB Configuration BIOS Setup Utility & MLUA 5-7 Boot Settings Boot Settings:
Under the slide of Boot, use key to move cursor on the string of Boot Settings Configuration, Boot Device Priority, Hard Disk Drives & Removable Drives for following features.
Boot Setting Configuration: Configure POST behavior. Boot Device Drives: Set the Boot Device Priority Sequence.
Hard Disk Drives/Removable Drives/CD & DVD Drives: Set the Boot Device Priority Sequence from available Drives.
Network Boot: Enables or Disables Network Boot.
Resume On RTC Alarm: Enable or Disable System wake up on RTC Alarm. Boot Display Device: Set Display Device used when system boots. BIOS Setup Utility & MLUA 5-8 Boot Settings Configuration Under the Slide of Boot use key to move cursor on the string of Quick Boot, Quiet Boot & NumLock on Boot for the features enable or disable.
Quick Boot: Enable or Disable Quick Boot. Enable this option will allows BIOS to skip certain tests while booting, this will decrease the time needed to boot the system.
Quiet Boot: Enable this option will shows logo screen instead of POST messages.
NumLock on Boot: set status & NumLock when system boot. Boot Device Priority Set the boot sequence from the available devices. A device enclosed in parenthesis is has been disabled in the corresponding type menu. BIOS Setup Utility & MLUA 5-9 Security Settings BIOS Password Setup Provide both a Supervisor and a User password. If you use both passwords, the Supervisor password must be set first. The system can be configured so that all users must enter a password every time the system boots or when Setup is executed, using either or either the Supervisor password or User password. The Supervisor and User passwords activate two different levels of password security. If you select password support, you are prompted for a one to six character password. Type the password on the keyboard. The password does not appear on the screen when typed. Make sure you write it down. If you forget it, you must drain NVRAM and reconfigure. Select Security Setup from the Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection, are described in this section. To access the sub menu for the following items, select the item and press <Enter>:
Change Supervisor Password
Change User Password
Clear User Password Supervisor Password
Indicate whether a supervisor password has been set. If the password has been installed, Installed displays. If not, Not Installed displays. User Password Indicate whether a user password has been set. If the password has been installed, Installed displays. If not, Not Installed displays. Change Supervisor Password:
Select Change Supervisor Password from the Security Setup menu and press <Enter>. 5-10 BIOS Setup Utility & MLUA Enter New Password:
Appear Type the password and press <Enter>. The screen does not display the characters entered. Retype the password as prompted and press <Enter>. If the password confirmation is incorrect, an error message appears. The password is stored in NVRAM after completes. Change User Password:
Select Change User Password from the Security Setup menu and press <Enter>. Enter New Password:
Appear Type the password and press <Enter>. The screen does not display the characters entered. Retype the password as prompted and press <Enter>. If the password confirmation is incorrect, an error message appears. The password is stored in NVRAM after completes. Clear User Password:
Select Clear User Password from the Security Setup menu and press <Enter>. Clear New Password:
[Ok] [Cancel]
Appear Type the password and press <Enter>. The screen does not display the characters entered. Retype the password as prompted and press <Enter>. If the password confirmation is incorrect, an error message appears. The password is stored in NVRAM after completes. Exit Options CAUTION:
It will conflict with ML910 Com Ports resource and there is a work-around to fix it if you use I/O resources is "2F8h","3F8h","2E8h" or "3E8h" to PCMCIA card. BIOS Setup Utility & MLUA 5-11 Please enter "BIOS Setup Utility" menu and refer following procedure to setup:
1. Click Advanced . 2. Select Peripherals Configuration. 3. To disable "Serial Port 1".
("Serial Port 1" is located on the left side of the notebook, when you disable it, this Serial Port1 will be no function.) 5-12 BIOS Setup Utility & MLUA ML User Application (MLUA) As previously described the MLUA is designed for users to configure the parameters of various functions in the notebook. By using these configuration parameters, you can change the default configuration that automatically loads when you turn on the computer. ML User Application is automatically launched every time you boot your notebook into Windows Operating System, this can be indicated by the ML User Application icon on the taskbar. Double-click on the ML User Application icon will bring up the application window. ML User Application is presented in a tab-based user interface, which consists of below tabs:
About tab displays the following system information:
o Motherboard Version o BIOS Version o EC Version o Application Version GPS tab displays the name of the built-in GPS module, and it allows user to turn ON or OFF the built-in GPS module. Default setting is OFF. General Purpose I/O tab allows user to turn ON or OFF the GPIO port 0 and GPIO port 1 when notebook is docked to a Vehicle Dock. Default setting is OFF both GPIO ports. Monitor tab displays the following information:
o Processor Temperature o Battery Capacity o Car Voltage o Docking Board Temperature o Docking Fan Speed WWAN Device tab displays the name of the built-in WWAN module, and it allows user to turn ON or OFF the built-in WWAN module. Default setting is OFF. BIOS Setup Utility & MLUA 5-13 Temperature tab displays the following temperature readings from different sensors located on the system:
o Processor Temperature o LCD Display Temperature o System Temperature o Hard Disk Drive Temperature o Primary Battery Temperature o Secondary Battery Temperature Battery tab allows user to select the most frequently used battery charger profile which defines the battery calibration cycle. This WLAN Device tab displays the name of the built-in WLAN module, and it allows user to turn ON or OFF the built-in WLAN module. Default setting is OFF. This Speaker Output tab allows user to define the notebook speaker behavior. General Guidelines Below are the general guidelines on how to use the ML User Application:
Click on the OK button to save changes and close the ML User Application window. Click on the Cancel button to discard changes and close the ML User Application. Click on the Apply button to save changes and keep the ML User Application window remained open. Click on the Get Default Value button to reset option to its default value. Click on the Help button to show the Help Content for the ML User Application. Note:
Changing on ML User Application parameters will impact the ML Administrator Application configuration that has connection with ML User Application and vice versa Specific details on the MLUA application and the setting that can be addressed are explained in more detail in the On-line Help that accompanies the application. 5-14 BIOS Setup Utility & MLUA ML Administrator Application (MLAA) This application is designed for administrator to configure the parameters of various functions in the notebook. By using these configuration parameters, you can change the default configuration that automatically loads when you turn on the computer. Every time you start the ML Administrator Application, the current configuration parameters saved in EC is loaded and displayed in the ML Administrator Application window. For specific details on this application and the various parameters that can be adjusted please refer to the On-line for the application. CAUTION:
It is recommended the any changes made using the MLAA application only be performed by a System Administrator. BIOS Setup Utility & MLUA 5-15 This page intentionally left blank 5-16 BIOS Setup Utility & MLUA 6 6 CHAPTER Installing Software Drivers To take full advantage of the unique features of your computer, some operating systems require customized software, known as drivers, to be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers. If not, you need to install the drivers using the driver CD supplied with your computer. This chapter describes how to install the drivers. Installing Software Drivers 6-1 How to Use the Driver CD NOTE:
1. The drivers may have been updated after this user guide was published. For latest driver updates, please contact your dealer. 2. You can always find README or document files in the folders for the LAN, TPM, Touch , Bluetooth, WLAN, HD Audio and Chipset on the driver CD. These files contain the latest information from the software supplier. 3. The available items may differ according to your computer model and operation system. 4. In order to access the User Guide on this CD you will need to have a copy of ADOBE Acrobat Reader on the computer or access to the Internet by the computer to use the ADOBE hot link icon to down load the reader. An Autorun program is provided on the driver CD to help you easily install the drivers. When the driver CD is inserted, the Autorun program automatically starts. If you need to start the program manually, run the AutoRun.exe program from the root directory of the driver CD. Installing Software Drivers 6-2 Main Menu The Main Menu Screen:
To install drivers and applications for your computer, make your selecting the right. Device Drivers Applications User Guide Browse CD Get ADOBE Reader Icon Provides access to the available drivers selections Provides access to the available applications selections Allows you to access the electronic version of the User Guide Allows you to browse the contents of this CD. Requires the ADOBE Reader This is a hot link to the ADOBE web site in order to access and download the ADOBE Reader for viewing the ML910 User Guide on this CD Installing Software Drivers 6-3 Installing Device Drivers 1. Click Device Drivers in the Main Menu. 2. To install the necessary driver, just click on the particular option and follow the onscreen instructions to continue and complete installation. Device Driver Installers Menu Screen There are 5 screens located in the Device Driver Installers menus. You can use the Next and Back buttons to navigate back and forth in the screens. Bluetooth Chipset DSP EVDO Click on the Bluetooth button to install both the driver & application Click on the Chipset button to install the Chipset driver Click on the DSP button to install the DSP driver Click on the EVDO button to access the Driver and Watcher installs 6-4 Installing Software Drivers EVDO Device Driver Installers Menu Screen EVDO EVDO MC5725 Driver Click on the EVDO button to install Watcher Click on the EVDO MC5725 Driver button to install the EVDO driver Device Driver Installers Page 2 of 5 Click on the Fingerprint button to installs the Fingerprint driver. Click on the HD Audio button to installs the HD Audio driver. Click on the LAN button to installs the LAN driver. Click on the HD Modem button to installs the Modem driver. Fingerprint HD Audio LAN Modem Installing Software Drivers 6-5 Device Driver Installers Page 3 of 5 MotoMesh Serial Mouse Patch for GPS TouchPad TouchPanel Click on the MotoMesh button to both the MotoMesh driver &
application. This is neither driver or app but is a required patch for GPS Operation Click on the TouchPad button to installs the LAN driver. Click on the TouchPanel button to installs the TouchPanel driver. Device Driver Installers Page 4 of 5 TPM UMTS USB LAN1 USB LAN2 Click on the TPM button to install the Trusted Platform Module driver. Click on the UMTS button to installs both the UMTS driver and application. Click on the USB LAN1 button to installs the USB LAN1 driver. Click on the USB LAN2 button to installs the USB LAN2 driver. 6-6 Installing Software Drivers Device Driver Installers Page 4 of 5 Click this button to access ATI video Driver Installer and NET Framework 2.0 Click on the WDE1000 button to install both the WDE1000 driver &
application Video WDE1000 Video Device Driver Installers ATI Video NET Framework 2.0 Click on the ATI Video to install the ATI video Driver Click on the NET Framework 2.0 button to install the NET Framework 2.0 which required for the ATI video driver Installing Software Drivers 6-7 Installing Applications 1. Click Applications in the Main Menu. 2. Click on the application program you want to install. ML Service ML User Application MW800 Display Utilities Click on the ML Service button to install the ML admin Application Click on the ML User Application button to install the ML User Application Click on the MW800 Display Utilities button to install the MW800 Display Application Utilities Installing Software Drivers 6-8 CHAPTER 7 Caring for the Computer Taking good care of your computer ensures trouble-free operation and also reduces the risk of damage to your computer. This chapter gives you guidelines covering these areas of maintenance:
How to protect the computer.
What to note when using and storing the computer.
How to clean the computer.
What to note when using the battery pack.
What to note when traveling with the computer. Caring for the Computer 7-1 Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Password The power-on password protects your computer against unauthorized use. If the password is set, the prompt requesting for the password appears on the screen whenever the computer is turned on. The password is set via the SCU program. See Security Settings in Chapter 5 for instructions. Using an Anti-Virus Strategy The Security feature of the SCU program protects the boot sector of the hard disk from virus attacks.. It is recommended that you install a virus-detecting program to keep your computer secure from potential viruses that could damage your files and system. 7-2 Caring for the Computer Taking Care of the Computer Location Guidelines
Use the computer where the temperature is between -20 C (-4 F) and 50 C (122 F).
Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust.
Do not cover or block any ventilation openings on the computer. For example, do not place the computer on a bed, sofa, rug, or other similar surface. Otherwise, overheating may occur which could result in damage to the computer.
Keep the computer at least 13 cm (5 inches) away from electrical appliances that can generate a strong magnetic field such as a TV, refrigerator, motor, or a large audio speaker.
Do not move the computer abruptly from a cold to a warm place. A temperature difference of more than 10 C (18 F) will cause condensation inside the unit, which may damage the storage media.
Do not place the computer on an unsteady surface. General Guidelines
Do not place heavy objects on top of the computer as this may damage the display.
The screen surface can be easily scratched. Do not use paper towels to clean the display. Avoid touching it with a ballpoint pen or pencil.
To maximize the life of the backlight in the display, use the systems power management feature to automatically turn off the backlight. Avoid using a screen saver or other software that prevents the power management from working. Cleaning Guidelines
Never clean the computer with its power on.
Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer.
Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.
Dust or grease on the touchscreen can affect its sensitivity. Clean the touchscreen by using adhesive tape to remove the dust and grease on its surface. Caring for the Computer 7-3 Battery Pack Guidelines Optimal Use of the ML910 RUGGED NOTEBOOK Battery The battery is a consumable product and its performance will gradually degrade based on usage. To minimize battery degradation and ensure longer life, limit the number of charges and ensure the battery is not exposed to high ambient temperatures. If possible, the battery pack should only be recharged when it is nearly fully discharged. It is recommended to store the battery removed from the ML910RUGGED NOTEBOOK with a nominal charge to prevent over-discharge. A full charge is recommended if the battery is to be stored in the ML910RUGGED NOTEBOOK. For optimal use, users should avoid the following:
Use on battery power for short periods of time then repeatedly charging Using or storing in a place with high temperature. Charging Charge and discharge time will differ depending on the computers power status and temperature. Battery charging time increases when the computers power is on and is also dependent on the batterys temperature. To charge the battery more quickly, power off the computer or place it in the standby or the hibernation mode. Battery charging time also increases when in low or high temperature environments below 10C, (50F) or above 30C (86F). During normal charging (between 32F and 113F) the battery indicator will glow amber. When full the indicator will glow green. The ML910s battery will not be charged if its temperature is outside the allowable range of 0 to 45C (32F to 113F). During this condition, the battery indicator will not be illuminated. The battery should be charged in a temperature range of 10C to 35C (50F to 95F). When the outside air temperature is high (35C or above), the temperature inside the battery will be higher. Avoid charging the battery where the temperature is high, such as inside a vehicle, with all its windows closed and/or exposed to the hot sun or other places where the ambient temperature is high. Although the battery can also be charged down to 0C, the charging time will be greatly increased and the battery capacity will be greatly reduced. It is not recommended to charge the battery more than once per day. Constant recharging of the battery after every use accelerates battery degradation. To increase battery life it is recommended to recharge the battery no more than once per day or when the remaining charge drops below 20%. To increase battery life, the computer will not charge the battery immediately after it has been fully charged unless the remaining charge has fallen to less than 95%
If possible, charge the battery while the computer is powered off. When the computers power is on, the temperature inside the battery will increase due to the heat generated by the internal electronic components. Charging the battery at higher temperatures will degrade the battery more quickly. It is highly recommended Caring for the Computer 7-4 that you charge the battery while the computer is powered off. This allows for faster charging, less degradation, and longer battery life. Maximizing Battery Operation Time Leave the computer off when not in use!
Decrease the internal LCD brightness by pressing FN + F5 Pressing Fn + F5 will lower the degree of brightness, thereby reducing the power consumption. Before stepping away from your computer, place it in standby or hibernation mode Standby or hibernation mode will reduce power consumption. To select Power Options: Click: [Start] - [Control Panel] - [Performance and Maintenance] - [Power Options], and select the desired power-saving setting. Motorola recommends against using screen savers or applications that place a significant load on the CPU Some screen savers and applications place a large load on the CPU, producing a significant decrease in battery runtime even when the computer is not being used. If possible remove unnecessary peripheral devices (USB devices, PC Cards, external mouse, etc.) when not in use. For all other power-saving settings, please refer to the Power Management information in this section of the User Guide. Storage and Non Use for Extended Periods When the computer is not in use for an extended period (10 days or more):
Remove the battery from the computer with a remaining charge of 30% to 45%, and then store it in a cool, dark and dry place. If the battery pack is kept installed in the computer, it will discharge steadily even when the computers power is off. If this condition continues for a long period (10 days or more), the battery may over discharge, causing performance degradation. In addition, this degradation will accelerate if the unit is stored in any high temperature environment such as inside a vehicle with windows closed, exposed to direct sun or in any other environment where the temperature is high. Store the unit with battery pack where the temperature is within the range of 10C to 30C (50F to 86F). Never allow the temperature to exceed 60C (140F) or permanent damage may occur. If the battery has been stored out of the notebook computer, longer than 60 days, it should be checked for remaining charge condition. If below 20% remaining charge, the battery should be charged up to 30 to 45% before placing it back in storage. Caring for the Computer 7-5 Removal of the Battery Pack Do not install or remove while the computer is on or connected to external power. CAUTION:
Removal of the battery pack with power on may present a dangerous condition and may cause the computer to malfunction or permanent damage to the battery. If you remove or store the battery pack, make sure the battery terminals do not contact any conductors such as metal objects or water. Otherwise the battery may become unusable as a result of a short circuit. Do not touch or attempt to clean the terminals. If battery terminals are dirty or damaged the battery may not function properly or the computer may not operate properly. Properly dispose of the dirty or damaged battery and obtain a new one. Battery Charge Status and Battery Calibration The battery pack has built-in functions to measure, store and display the battery charge status. As the battery pack is used over a long period of time, the remaining capacity display may become inaccurate due to aging of the battery pack, usage, and other factors. To display the remaining battery charge accurately, the Battery Calibration function will automatically check the state of the battery, and then discharge it to the appropriate level for calibration. A one hour rest period is then necessary. (AC or external power must stay connected during the preceding steps). After the rest period, the battery will fully charge as long as the AC power or external power is still applied. This procedure will be performed once after initial setup and every 30-45 days thereafter depending on the usage setting, mostly vehicle or mostly office. NOTE:
1. A full charge is not necessary for successful completion of the calibration. 2. Battery Calibration does not increase the batterys capacity; it only allows the battery to recalibrate and report its full capacity, accurately. 7-6 Caring for the Computer When Traveling
Before traveling with your computer, make a backup of your hard disk data into optical discs or other storage devices. As an added precaution, bring along an extra copy of your important data.
Make sure the battery pack is fully charged.
Make sure the computer is turned off.
Do not leave objects that will press onto the display.
Disconnect the AC adapter from the computer and take it with you. Use the AC adapter as the power source and as a battery-charger.
Hand-carry the computer. Do not check it in as luggage.
Allow extra time for airport security. Many airports inspect electronic devices carefully.
When going through airport security, it is recommended that you send the computer and USB disks through the X-ray machine (the device you set your bags on). Avoid the magnetic detector (the device you walk through) or the magnetic wand (the hand-held device used by security personnel). If you plan to travel abroad with your computer, consult your dealer for the appropriate AC power cord for use in your country of destination.
Caring for the Computer 7-7 This page intentionally left blank 7-8 Caring for the Computer CHAPTER 8 Troubleshooting Hardware, software, or a combination of both can cause computer problems. This chapter tells you what actions to take when solving common computer problems. This chapter is divided into three sections:
Preliminary checklist. Solving common problems. Resetting the computer. HDD Recovery Process. Troubleshooting 8-1 Preliminary Checklist Here are helpful hints to follow when you encounter any problem before taking further action.
Try to isolate which part of the computer is causing the problem.
Make sure you turn on all peripheral devices before turning on the computer. If an external device has a problem, make sure that the cable connections are correct and secure.
Make sure the configuration information is properly set in the BIOS Setup Utility.
Make sure all the device drivers are correctly installed.
Make note of your observations. Are there any messages on the screen? Do any indicators light? Do you hear any beeps? Detailed descriptions are useful to the service personnel when you need to consult one for assistance. If the problem persists after you follow the instructions in this chapter, contact an authorized dealer for help. 8-2 Troubleshooting Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Battery Problems Bluetooth Problems ODD Drive Problems Display Problems Hardware Device Problems Hard Disk Drive Problems Keyboard, Mouse and Touchpad Problems LAN Problems WLAN Problems Modem Problems Power Management Problems Software Problems Sound Problems Startup Problems Other Problems
`Resetting the Computer The HDD Recovery Process Go to P. 8-4 P. 8-5 P. 8-5 P. 8-6 P. 8-7 P. 8-7 P. 8-8 P. 8-8 P. 8-9 P. 8-10 P. 8-10 P. 8-10 P. 8-11 P. 8-11 P. 8-11 P. 8-12 P. 8-13 Troubleshooting 8-3 Battery Problems The battery does not charge (Battery Charge indicator does not light amber).
Make sure the AC adapter is properly connected.
Make sure the battery is not too hot or cold. Allow time for the battery pack to return to room temperature.
Make sure the battery pack is correctly installed.
Make sure the battery terminals are clean. The operating time of a fully charged battery becomes shorter.
If you often partially recharge and discharge, the battery might not be charged to its full potential. Initialize the battery to solve the problem. (See Initializing the Battery Pack in Chapter 3 for instructions.) The battery operating time indicated by the battery meter does not match the actual operating time.
The actual operating time can be different from the estimated time, depending on how you are using the computer. If the actual operating time is much less than the estimated time, initialize the battery. (See Initializing the Battery Pack in Chapter 3 for instructions.) 8-4 Troubleshooting Bluetooth Problems I cannot connect to another Bluetooth-enabled device.
Make sure both devices have Bluetooth activated.
Make sure the distance between the two devices is not over 10 meters or that there are no walls or other obstructions between the devices.
Make sure the other device is not in Hidden mode.
Make sure both devices are compatible. I cannot end a Bluetooth connection.
If another device is connected to your computer, you can either end the connection using the other device or by deactivating Bluetooth. ODD Drive Problems The ODD drive cannot read a disc.
Make sure the disc is correctly seated in the tray, with the label facing up.
Make sure the disc is not dirty. Clean the disc with a disc cleaning kit, available in most computer stores.
Make sure the computer supports the disc or the files contained. You cannot eject a disc. The disc is not properly seated in the drive. Manually release the disc following the method described next:
1. Turn off the computer. 2. Insert a small rod, such as a straightened paperclip, into the drives manual-eject hole and push firmly to release the tray. 3. Pull the tray out until fully extended, and then remove the disc. Troubleshooting 8-5 Display Problems Nothing appears on the screen.
If the power-on indicator is not on, check the electrical outlet, the plugs and power cords. If the power button does not respond to a light touch, press the button firmly. If you are using battery power, make sure that it has a charge remaining and that it is installed correctly.
During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back.
The brightness level might be too low. Increase brightness by pressing Fn+F6.
The display output might be set to an external device. To switch the display back to the LCD, press Fn+F9, or change the display through the settings in Display Properties.
Try turning the computer off (refer the Resetting the computer section on P. 814), wait for a few seconds then turn on again. The characters on the screen are dim.
Adjust the brightness and/or contrast. Bad dots appear on the display at all times.
A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology. It should not be regarded as a LCD defect. Resolution cannot be adjusted to desired setting.
Make sure that the video driver is correctly installed. The external monitor displays nothing.
Make sure that the monitor is turned on.
Make sure that the monitors signal cable is properly connected. 8-6 Troubleshooting
Switch the display to the monitor by pressing Fn+F9, or change the display through the settings in Display Properties. Simultaneous display/multi-display does not work.
Make sure you turn on the external monitor before turning on the computer.
Press Fn+F9 to toggle through the display options or change the settings in Display Properties in Windows. Hardware Device Problems The computer does not recognize a newly installed device.
The device may not be correctly configured in the BIOS Setup Utility. Run the BIOS Setup Utility program to identify the new type.
Make sure if the device driver needs to be installed. (Refer to the documentation that came with the device.)
Make sure if the device needs any jumper or switch settings. (Refer to the documentation that came with the device.)
Check the cables or power cords for correct connections.
For an external device that has its own power switch, make sure the power is turned on. Hard Disk Drive Problems The hard disk drive error message appears on the screen. Insert a bootable diskette and check the integrity of your hard drive.
The hard disk drive has defects. Ask your dealer for help. The hard disk drive operations seem slow.
The data files stored on the hard disk drive may be badly fragmented. Use a tool such as Windows Disk Defragmenter to rearrange the files and improve the performance. The hard disk drive in-use indicator glows without blinking.
The data files stored on the hard disk drive may be badly fragmented. Use a tool such as Windows Disk Defragmenter to rearrange the files and improve the performance. Troubleshooting 8-7 Keyboard, Mouse and Touchpad Problems The keyboard does not respond.
Try connecting an external keyboard. If it works, contact an authorized dealer, as the internal keyboard cable might be loose. The numeric keypad is disabled.
Make sure Num Lk is switched on. (Check if the Num Lock Indicator not.) glows or The external keyboard does not work.
Make sure the keyboard cable is properly connected. The USB mouse does not work.
Make sure the mouse cable is properly connected. The touchpad does not work, or the pointer is difficult to control with the touchpad.
Make sure the touchpad is clean. LAN Problems I cannot access the network.
Make sure the LAN driver is correctly installed.
Make sure the LAN cable is properly connected to the RJ-45 connector and the network hub.
Make sure the network is properly setup and configured.
Make sure the user name or password is correct. 8-8 Troubleshooting WLAN Problems I cannot use the WLAN feature.
Make sure the WLAN card is correctly installed.
Make sure the necessary driver(s) is correctly installed.
Make sure the WLAN feature is turned on. Transmission quality is poor.
Your computer may be in an out-of-range situation. Move your computer closer to the Access Point or to the WLAN device it is associated with.
Check if there is high interference around the environment and solve the problem as described next. Radio interference exists.
Move your computer away from the device causing the radio interference such as microwave oven and large metal objects.
Plug your computer into an outlet on a different branch circuit from that used by the affecting device.
Consult your dealer or an experienced radio technician for help. I cannot connect to another WLAN device.
Make sure the WLAN feature is turned on.
Make sure the SSID setting is the same for every WLAN device in the network.
Your computer is not recognizing changes. Restart the computer.
Make sure the IP address or subnet mask setting is correct. I cannot communicate with the computer in the network when Infrastructure mode is configured.
Make sure the Access Point your computer is associated with is powered on and all the LEDs are working properly. If the quality of the operating radio channel is poor, change the Access Point and all the wireless station(s) within the BSSID to another radio channel.
Your computer may be in an out-of-range situation. Move your computer closer to the Access Point it is associated with.
Make sure your computer is configured with the same security option (encryption) to the Access Point.
Use the Web Manager/Telnet of the Access Point to check whether Access Point is connected to the network.
Reconfigure and reset the Access Point. Troubleshooting 8-9 I cannot access the network.
Make sure the necessary driver(s) is correctly installed.
Make sure the network configuration is appropriate.
Make sure the user name or password is correct.
You have moved out of range of the network.
Turn off power management. Modem Problems The modem does not work.
Make sure the modem driver is correctly installed. Power Management Problems The computer does not enter Standby or Hibernation mode automatically.
When your computer is connected to another device, it may not enter Standby or Hibernation mode if the connection is actively in use.
Make sure the Standby or Hibernation time-out is enabled. The computer does not enter Standby or Hibernation mode immediately.
If the computer is busy performing tasks, it will only enter Standby or Hibernation mode after completing the tasks. The computer does not resume from Standby or Hibernation mode.
The computer automatically enters Standby or Hibernation mode when the battery pack drops to 3% of being fully discharged. Do any one of the following:
Connect the AC adapter to the computer. Replace the empty battery pack with a fully charged one. The computer does not enter Hibernation mode with the Fn+F10 hot keys.
Make sure the Hibernation function is specified on the sleep button. Software Problems An application program does not work correctly.
Make sure the software is correctly installed.
If an error message appears on the screen, consult the softwares documentation for further information. 8-10 Troubleshooting
If you are sure the operation has stopped, reset the computer. (See Resetting the Computer later in this chapter.)
Use Task Manager by pressing Ctrl+Alt+Del to close the error application. Sound Problems No sound is audible.
Make sure the volume control is not set too low.
Make sure the audio driver is correctly installed.
Make sure the computer is not in Standby mode. If using an external speaker, make sure the speaker is properly connected.
Distorted sound is produced.
Make sure the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound. The sound system does not record.
Adjust the playback or recording sound levels. The external microphone or audio device does not work.
Make sure the microphone is connected to the proper connector on the computer.
Make sure the driver is installed in your computer.
Click the speaker icon on the taskbar and check the Windows volume control.
Check the volume control of your computer. Startup Problems When you turn on the computer, it does not respond and the Power Indicator does not light green.
If you are using an external AC power, make sure the AC adapter is correctly and securely connected. Also, make sure the electrical outlet works properly. If you are using the battery power, make sure the battery has been charged prior to turning on the computer. When you turn on the computer, it stops after POST.
Restart your computer. Other Problems The date/time is incorrect.
Correct the date and time via the operating system or BIOS setup Utility. Troubleshooting 8-11
If the above does not work, the RTC (Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace the RTC battery. Resetting the Computer You may have to reset (reboot) your computer when an error occurs and the program you are using hangs up. If the system operation appears to hang, first wait. It is possible that the system is processing data. Check the hard disk drive in-use indicator. If it blinks irregularly, the program may be accessing data and preventing you from using the keyboard. If you are sure the operation has stalled and the restart function of the operating system does not work, reset the computer. Reset the computer by any one of these methods:
Press Ctrl+Alt+Del to launch the Task Manager window and select Shut Down or Restart. If the above action does not work, turn off the system by pressing the Power Button for 4 seconds. Wait for at least five seconds and turn on again. If the above does not work, press the Power Button for 10 seconds. The system will shut down and the Embedded Controller BIOS will be reset. Wait for at least five seconds before turning it on again.
CAUTION:
Resetting will cause any unsaved data to be lost, but does not impact any of the saved data on the hard drive. Only the Embedded Controller information will be reset. 8-12 Troubleshooting The HDD Recovery Process System Recovery Program Your system comes with a System Recovery program that can help you to diagnose and solve problems you found on your system. It consists of the following options:
Run System Restore Utility This option will active the System Restore function, which is a component of Windows XP that you can use to restore your computer to a previous state, if a problem occurs, without losing your personal data files. Run System Recovery This option will wipe out the entire hard disk and restore your system back to its original state as it was shipped out from factory. Run Disk Diagnostic Utility This option will help you to detect disks errors and attempt to repair errors automatically. 1. During system boots up, press on Ctrl + F9 keys on keyboard to activate the System Recovery. Troubleshooting 8-13 2. You will be prompted for the System Recovery password, enter the password then press Enter key to continue. Note:
The default System Recovery password is 123456. It can be changed in BIOS Setup. If you failed to enter the correct password in 3 attempts, system will be halted and you will need to restart the system in order to try again. 3. System will be booting into System Recovery program if you entered the correct password. 8-14 Troubleshooting 4. This is the Welcome screen you will be seeing if you successfully activate the System Recovery program. The standard navigation of the program are outlined as below:
To proceed to the next step, click on the Next button. To go back to previous screen, click on the Back button. To go back to the Welcome screen, click on the Cancel button. To terminate this program and restart to Windows, click on the Exit button. 5. You will be presented with the options of task that you may perform with this program. A brief description of the selected task is also displayed at the bottom of the screen to help you. After select the task you want to perform, click on Next button. Troubleshooting 8-15 6. If you selected System Restore Utility as the task that you want to perform, you will be presented with this screen. To proceed with System Restore, click on the Next button. 7. System Restore will be launched automatically after the system restarted. 8-16 Troubleshooting 8. If you selected System Recovery as the task that you want to perform, you will be presented with this screen. To proceed with System Recovery, click on the Next button. 9. Please wait while System Recovery is in progress, it may takes up to 10 minutes to complete. Troubleshooting 8-17 10. System Recovery is completed successfully. To restart your system, click on the Next button. 11. If you selected Disc Diagnostic Utility as the task that you want to perform, you will be presented with this screen. To proceed with Disc Diagnostic Utility, click on the Next button. 8-18 Troubleshooting 12. Please wait while Disk Diagnostic Utility is checking your hard drive. 13. Disk Diagnostic Utility will show the summary of the disk diagnostic. To see the detailed result, click on the Click here to see the Disk Diagnostic Result link. To exit the program and restart to Windows, click on the Exit button. Troubleshooting 8-19 This page intentionally left blank 8-20 Troubleshooting CHAPTER 9 The Accessories List Parts No. Description Item No. 1 HKNN4004A ML910 Primary Battery 2 HKNN4006A Secondary Batteryfor media bay 3 HKVN4005A Software CD, ML910 User Manual & Drivers 4 HKLN4317A ML910 High-Tier Dock 5 HKLN4310A ML910 Mid-Tier Dock 6 HKLN4311A ML910 Office Port Replicator 7 HKUN4082A Full Travel Keyboard US , ML910 8 HKUN4083A Rubberized Keyboard Backlit Assy USML910 9 HKLN4309A ML910 Spare AC ADAPTER 10 DDN756 ML910 Cigarette ADAPTER 11 HKLN4315A 80G HDD Assembly, ML910 12 HKLN4316A 120G HDD Assembly, ML910 13 HKLN4359A Smartcard Reader, PCMCIA **
14 FAG5027A GPS Antenna 15 FAG5026A Wireless WAN Antenna 16 HKUN4064A RF Pass thru kit 17 HKUN4081A Secondary SSD 8Gb Drive 18 HKLN4313A SSD Secondary Installation Kit Carriers Modems 19 HKUN4067A EVDO Internal Module VERIZON 20 HKUN4071A UMTS Internal Module UMTS 21 HKUN4066A PVDT Modem Installation Kit (PRM w/o Modem) 22 HKUN4075A EVDO Internal Module SPRINT
** Note: The smartcard reader (HKLN4359A) was designed to meet the ISO7816 operating temperature requirements (0-50C) and does not meet the MIL SPEC-810F temperature requirements. Operating outside of this temperature range may result in abnormal behavior. The Accessories list 9-1 Item No. EMEA Specific Accessories Parts No. Description 23 HKKN4016A Cable, AC Power UK 24 HKKN4015A Cable, AC Power Europe 25 HKUN4068A Full Travel Keyboard UK, ML910 26 HKUN4065A Rubberized Keyboard Backlit Assy ML910 UK 27 HKUN4073A UMTS Internal ModuleEMEA Media Bay Options 28 HKUN4078A CD-RW/DVD Combo Drive 29 HKUN4079A CD-RW/DVD-RW Dual Drive Contact local Motorola representative for inquiries please. 30 HKUN4084A 512MB RAM Module, ML910 31 HKUN4085A 1GB RAM Module, ML910 32 DDN7511A USB Floppy Drive (YE-DATA) External ML910 33 HKLN4273A External PCMCIA Mesh Modem WDE 1100 34 HK1235A External PCMCIA Mesh Modem WMC7300 35 HK1234A External PCMCIA Mesh Modem WMC6300 Note: Accessory List and availability subject to change without notice. Contact your Motorola Dealer for latest information. 9-2 The Accessories list CHAPTER10 1 2 The Acronyms and Glossary Items Acronyms Glossary 1 AC Alternating Current 2 ACPI 3 AP 4 ATA 5 BIOS 6 BSSID 7 CCD Advanced Configuration and Power Interface: An industry-standard specification (co-developed by Hewlett-Packard, Intel, Microsoft, Phoenix, and Toshiba, for operating-system-directed power management for laptop, desktop, and server computers. A replacement for APM. Access Point Advanced Technology Attachment, The computer disk drive interface standard. The specification is for IDE interface. Basic Input/Output System Basic Service Set Identifier. Charge Coupled Device, A storage device in which individual semiconductor components are connected to each other so that the electrical charge at the output of one device provides the input to the next. 8 CPU Central processing unit: The computational and control unit of a computer. 9 CRT 10 DC 11 DVCAM A digital video compression format provided by Sony. The DVCAM format Cathode-Ray Tube Direct Current 12 DVD provides fixed media compression. Digital Versatile Disk 13 DVD-RW Digital Versatile Disk Read and Write 14 EEPROM Electrically Erasable Programmable Read-Only Memory: EPROM that can be erased using electrical signals applied to specific pins. See EPROM. 15 EIRP Effective Isotropic Radiated Power 16 EMEA Europe, Middle East and Africa, a term used in traditional and electronic commerce to signify activities in those regions of the world or to refer specifically to those regions. 3 The Acronyms and Glossary 10-1 1 Items Acronyms Glossary 17 EMI Electromagnetic interference, Interference by electromagnetic signals that can cause reduced data integrity and increased error rates on transmission channels. 18 EVDO 19 FCC 20 GPS Evolution Data Only, EVDO is a high-speed network protocol used for wireless Internet data communications. EVDO supports up to 2.4 Mbps bandwidth using a set of radio frequency channels. The EVDO protocol supports asymmetric communications, allocating a Federal Communications Commission. Global Positioning System. A system that uses satellites, receivers and software to allow users to determine their precise geographic position. 21 HDD Hard Disk Drive 22 IP Internet Protocol: Network layer protocol in the TCP/IP stack offering a connectionless internet work service. IP provides features for addressing, type-of-service specification, fragmentation and reassembly, and security. Defined in RFC 791. 23 LAN Local Area Network 24 LCD Liquid Crystal Display 25 LED 26 MAC 27 MESH Light-Emitting Diode: A semiconductor device that emits light (usually visible or infrared) when forward-biased. Media Access Control A set of faces, each of which is described by a simple polygon. 28 MMCX Multimedia Communications Exchange 29 NVRAM Nonvolatile RAM, RAM that retains its contents when a unit is turned off. 30 ODD 31 OS 32 PCMCIA 33 POST 34 PVDT 35 RF Optical Disk Drive Operating System Personal Computer Memory Card International Association. An industry trade association that creates standards for notebook computer peripheral devices such as PC cards. Power-On Self-Test Private DataTAC, a registered trademark of Motorola Inc. Radio Frequency, The part of the general frequency spectrum between the audio and infrared light regions (about 10 kHz to10,000,000 MHz). 36 RoHS 37 RTC Restriction o f Hazardous Substance, Real-Time Clock 2 The Acronyms and Glossary 10-2 1 Items Acronyms Glossary 38 S/PDIF 39 SAR 40 SATA 41 SCU 42 SSID 43 44 TFT TPM 45 UMTS 46 USB 47 VCR 48 VGA Sony/Philips Digital Interface: It is a standard (developed by Sony and Philips) for the digital transfer of audio data. Transferring audio data between two devices digitally avoids the degradation of quality inherent in using digital to analogue devices. Specific Absorption Rate Serial Advanced Technology Attachment or serial ATA Setup Configuration Utility Service set identifier: A code or name attached to a wireless Wi-Fi network. All devices must use this same, case-sensitive name to communicate. Thin Film technology Trusted Platform Module. Universal Mobile Telephone System, UMTS is the name for the third generation mobile telephone standard in Europe, standardized by ETSI (see ETSI). UMTS will deliver broadband information at speeds up to 2 MBIT/s. Besides voice and data, UMTS will deliver Universal serial bus, An external bus connection that supports a maximum bandwidth of 12 Mbps and is widely used to connect peripheral devices (sometimes called dongles) to a computer. video cassette recorder, Variable-gain amplifier 49 WEEE Waste Electrical and Electronic Equipment: A safety directive. 50 WLAN 51 WWAN 52 WXGA Wireless Local Area Network. Wireless Wide Area Network, Wide Extended Graphic Array 2 3 4 5 6 7 8 The Acronyms and Glossary 10-3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 This page intentionally left blank The Acronyms and Glossary 10-4 APPENDIX A Specifications NOTE:
Specifications are subject to change without any prior notices. Parts Specifications CPU Video Graphics Adapter Memory ROM BIOS RAM Display Audio Keyboard Pointing device System Video Panel Video port Controller Ports Storage device Hard disk drive Intel Core Duo L2400 1.66GHz Processor. ATIMobility Radeon X1400 (dedicated 128MB) MotionComp capability, support hardware aid for DVD playback Support Dual View function LCD/CRT simultaneous 2 MB L2 Cashe 512 KB Flash EEPROM, system and VGA BIOS, ACPI 2.0, PC2001compliant. Two 200pin DDR2 667 SODIMM sockets, Standard 512 MB, maximum 1GB*2 pcs. ATI M54 128 MB 13.3 transmissive WXGA (1280 x 800) LCD with touch screen 500 NIT Brightness. VGA port, video capture. Azalia ALC262 codec, AC97 Rev.2.2 support. Optical S/PDIF output. 2 channel support. Optional: Full travel QWERTY, fully-sealed backlight keyboard; rubberized backlight keyboard. Touchpad with 4 programmable buttons. 2.5inch, SATA interface 80 GB standard shock-mounted w/ heater;
Optional: 120 GB hard disk drive,16GB Solid State Drive(SSD) Floppy Disk Drive Optional: External USB floppy. Specifications A-1 I/O ports Configurable Media Bay Configurable Media Bay, Optional: CD RW / DVD ROM (Combo Drive), CD RW/
DVD RW (Dual Drive), Secondary Battery, or Removable 8GB Secondary Solid State Drive (SSD). Parts Specifications Fingerprint Scanner; 500dpi
(requires customer provided software application) PCMCIA : 1x External Type II - Cardbus support.
(Accessory PCMCIA to pci Express 34 converter card included) I/O ports:
* 1x Serial
* 3x USB 2.0
* 1x RJ-11
* 1xDC input
* 1xShrouded Hot-docking Port
* 1xRJ-45 10/100/100 Base-TLAN
* 2xExternal RF Pass-Through Ports (1:GPS, 1:WWAN) Modem LAN (Option) 56 K (V.90/V.92; 28,000 ~ 56,000 bits/s data rates) Broadcom BCM5755M 10/100/1000Mbps. Communications Others (options) Intel 3945 Wireless LAN 802.11a/b/g using diversity antennas. GPS Lassen IQ module Bluetooth V2 AC adapter Universal AC adapter
- Input: 100-240 V, 50/60 Hz AC
- Output: 18.5V DC/120W Battery Primary: Smart Liion battery 11.1 V / 7200 mAH (3S3P) Secondary: Smart Liion battery 11.1V/ 3500mAH
(Configurable Media Bay Option) Power A-2 Specifications Parts Dimension (WDH) Weight Operating System Temperature Environment Specifications 3.2x11.1x13.2 (336mmx283mmx78mm) 9.9 lbs (4.5 kg) Supports Windows XP, SP2 According to IEC 68-2-1,2,14 / MIL-STD-810F, Method 501.4, 502.4 Operating: 20C to 60C (Tested) Humidity According to IEC 68-2-30 / MIL-STD-810F, Method 507.4 5% to 95% RH, non condensing. Altitude Shock Vibration Drop According to IEC 68-2-30 / MIL-STD-810F, Method 500.4 Operating: 15,000 ft Non-operating: 40,000 ft altitude change rate: 2,000 ft/min According to IEC 68-2-27 / MIL-STD-810F, Method 516.5 Operating: 40g, 11 ms, half sine wave Non-operating: 50g, 11 ms, half sine wave According to IEC 68-2-6 / MIL-STD-810F, Method 514.5 Operating: 10~55Hz/0.075mm, 55~500Hz/1.0g Non-operating: 10~55Hz/0.15mm, 55~500Hz/2.0g According to IEC 68-2-32 / MIL-STD-810F, Method 516.5
(base unit only) Survives 30-36 drop depending on configuration Specifications A-3 This page intentionally left blank A-4 Specifications APPENDIX B Fingerprint Recognition Your ML910 RUGGED NOTEBOOK features a fingerprint recognition system designed for computer security. It provides a high level of user convenience and gives you a set of powerful tools for securing your computer and protecting your private data. The system can:
Display fingerprint images derived from the sensor IC. Enroll new users. Extract fingerprint templates from raw images, and store them in a local database. Match live-scan fingerprints against the local database. Fingerprint Recognition B-1 Finger Placement 1. The fingerprint sensor is located at the left side of palm-rest. 2. Slip your finger with the arrows direction firmly with steady pressure. NOTE:
Be sure that you are making contact with the sensor surface during the scan. The system works best when user follows the recommended direction. B-2 Fingerprint Recognition Fingerprint Recognition The ML910 RUGGED NOTEBOOK has a separate embedded Fingerprint Module and a Trusted Platform Module (TPM) included in the unit. This will allow ML910RUGGED NOTEBOOK to support applications for Trusted Platform Module (TPM) and Fingerprint Recognition. 1. Fingerprint Module can support Fingerprint Recognition applications which can provide for the following features:
Computers
Application of Protection
Secure Windows Logon,
Enterprise Class Password Management,
File, NOTE:
1. Above functions will be defined by the Application Provider and the software is used with the Fingerprint Module. Installation of the Fingerprint Module driver can be found in Chapter 6 of this User Guide. 2. 2. Trusted Platform Module (TPM) can support applications TPM device in the unit. This can provide the following functions based on the application used:
Personal Secure Drive,
Encrypted virtual drive
Protection against dictionary attacks NOTE:
1. 2. Above functions will be defined by the Application Provider. Installation of the TPM driver can be found in Chapter 6 of this User Guide. Fingerprint Recognition B-3 This page intentionally left blank. B-4 Fingerprint Recognition C APPENDIX APPENDIX APPENDIX Self Install Internal Wireless Modems Most customers will purchase their embedded EVDO or HSDPA WWAN modems from Motorola and have them pre-installed by the factory. It is possible to add an EVDO REV A. or HSDPA WWAN
(Cellular Carrier) modem later by purchasing a WWAN module from Motorola. Note:
Normally, Motorolas Agencies will provide several kind of Wireless Internal Module and they are different in one/two connectors by one/two of WWAN cable to snap on the joint of the mini card. Please refer following information for installation. Only the items listed in the below table are Motorola certified dives for the ML910 TM RUGGED NOTEBOOK operation. Item Kit No. Description Connector Numbers WWAN Cable 1 HKUN4067A Wireless EVDO REV. A Internal Module - VERIZON 2 HKUN4075A Wireless EVDO REV. A Internal Module - SPRINT 3 HKUN4071A Wireless HSDPA Internal Module HSDPA 4 HKUN4073A Wireless HSDPA Internal Module - EMEA Self Install Internal Wireless Modems 2 2 1 1 2 2 1 1 C-1 Installation of the HSDPA Internal Modem HSDPA Internal kits should have one mini Card port and one WWAN cable such as HKUN4071A and HKUN4073A. Please refer to following procedure for installation. Remove the M logo for installation.
Remove one screw from the M logo.
Remove the M logo. C-2 Self Install Internal Wireless Modems
You will find two antenna (WWAN) cables attached by two pieces of Kapton tape on the mini card bracket.
Remove Kapton tape from the cable.
Remove two screws from the mini card bracket. Self Install Internal Wireless Modems C-3
Insert the Wireless HSDPA Modem Kit.
Fix two screws on the Wireless HSDPA Modem kit. C-4 Self Install Internal Wireless Modems
Snap the Black WWAN cable onto the main port on the mini card.
Insert the SIM card.
Installed Internal Wireless HSDPA Modem kit with SIM card. Self Install Internal Wireless Modems C-5
Place the M logo back on ML910 TM RUGGED NOTEBOOK unit.
Fix the M logo with a screw. C-6 Self Install Internal Wireless Modems Installation of the EVDO REV. A Internal Modem EVDO REV. A Internal Kits should have two mini card port connectors and two WWAN Cables such as Kit No. HKUN4067A and HKUN4075A. Please refer to following procedure for installation.
Remove one screw from the M logo.
Remove the M logo. Self Install Internal Wireless Modems C-7
You will find two antenna (WWAN) cables attached by two pieces of Kapton tape on the mini card bracket.
Remove Kapton tape from the cable.
Remove two screws from the mini card bracket.
Insert the Wireless EVDO REV. A Module Kit. C-8 Self Install Internal Wireless Modems
Fix two screws on the Wireless EVDO REV. A Module.
Snap the Black WWAN cable onto the Main port of the mini card and the White WWAN cable onto the AUX post of the mini card.
Place the M logo back on ML910 TM RUGGED NOTEBOOK unit. Self Install Internal Wireless Modems C-9
Fix the M logo with a screw. C-10 Self Install Internal Wireless Modems Installation of the PRM240 Internal Modem Module
Remove one screw from the M logo.
Remove the M logo.
You will find two WWAN cables attached by two pieces of Kapton tape on the mini card bracket. Self Install Internal Wireless Modems C-11
Remove Kapton tape from cables.
For each PRM240 Internal Modem Kit (kit no. HKUN4066A), it includes one FFC cable, one MMCX cable and one PRM240 Internal Modem module.
Connect one side of the MMCX cable to the PRM240 module. C-12 Self Install Internal Wireless Modems
Remove four screws from the mini card bracket.
Remove the mini card bracket from ML910 TM RUGGED NOTEBOOK unit.
Place the PRM240 module on ML910 TM RUGGED NOTEBOOK by matching each corner of the PRM240 Internal Modem module with the four screw holes. Self Install Internal Wireless Modems C-13
Fix four screws back on to lock the PRM240 Internal Modem Module.
Snap the Black WWAN cable to the MMCX cable..
Connect the FFC cable to the FFC connector on the main board. C-14 Self Install Internal Wireless Modems
Place the M logo back on ML910 TM RUGGED NOTEBOOK unit. Self Install Internal Wireless Modems C-15
Fix the M logo with a screw. C-16 Self Install Internal Wireless Modems D APPENDIX APPENDIX APPENDIX RoHS / WEEE RoSH / WEEE D-1 D-2 RoSH / WEEE RoSH / WEEE D-3 D-4 RoSH / WEEE RoSH / WEEE D-5 D-6 RoSH / WEEE
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-10-03 | 1850.2 ~ 1909.8 | PCB - PCS Licensed Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-10-03
|
||||
1 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0025009739
|
||||
1 | Physical Address |
1303 East Algonquin Road
|
||||
1 |
Schaumburg, Illinois 60196
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
r******@pctestlab.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
ABZ
|
||||
1 | Equipment Product Code |
89FT7625
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R****** S******
|
||||
1 | Telephone Number |
847-3********
|
||||
1 | Fax Number |
847-5********
|
||||
1 |
B******@motorolasolutions.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R****** O****
|
||||
1 | Physical Address |
6660-B Dobbin Road
|
||||
1 |
Columbia, Maryland 21045
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/17/2007 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile Computer with GSM/ EDGE/ WCDMA Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is ERP for Part 22 and EIRP for Part 24. This device is approved for mobile operation, pursuant to 2.1091. Antenna(s) used by this transmitter must provide a minimum separation distance of 20 cm from all persons, and must not be co-located or operate in conjunction with any other antenna or transmitter, other than those modules approved for use with the ML910 Series PC. This device is also approved to be co-located with additional external modules (FCC ID: QJEWMC73000705 and FCC ID: QJEWMC6300704). End-users must be informed of operating requirements needed for maintaining RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 | Name |
R******** O****
|
||||
1 | Telephone Number |
410-2********
|
||||
1 | Fax Number |
410-2********
|
||||
1 |
r******@pctestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 824.2 | 848.8 | 2.143 | 2.5 ppm | 243KGXW | ||||||||||||||||||||||||||||||||||
1 | 2 | 22H | 824.2 | 848.8 | 1.663 | 2.5 ppm | 246KG7W | ||||||||||||||||||||||||||||||||||
1 | 3 | 22H | 824.2 | 848.8 | 0.296 | 2.5 ppm | 4M17F9W | ||||||||||||||||||||||||||||||||||
1 | 4 | 24E | 1850.2 | 1909.8 | 1.66 | 2.5 ppm | 248KGXW | ||||||||||||||||||||||||||||||||||
1 | 5 | 24E | 1850.2 | 1909.8 | 1.259 | 2.5 ppm | 243KG7W | ||||||||||||||||||||||||||||||||||
1 | 6 | 24E | 1850.2 | 1909.8 | 0.316 | 2.5 ppm | 4M15F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC