all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Exhibit D Users Manual per 2 1033 c3 | Users Manual | 867.38 KiB | May 11 2002 | |||
1 2 | Cover Letter(s) | March 06 2008 | ||||||
1 2 | Cover Letter(s) | May 11 2002 | ||||||
1 2 | ID Label/Location Info | May 11 2002 | ||||||
1 2 | External Photos | May 11 2002 | ||||||
1 2 | Internal Photos | May 11 2002 | ||||||
1 2 | Test Report | May 11 2002 | ||||||
1 2 | RF Exposure Info | May 11 2002 | ||||||
1 2 | Parts List/Tune Up Info | May 11 2002 |
1 2 | Exhibit D Users Manual per 2 1033 c3 | Users Manual | 867.38 KiB | May 11 2002 |
APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3773-D Draft copy of the of the front matter of the following instruction manual is enclosed with this submission:
INSTRUCTION MANUALS 68P81095E55-C ......................................................................... Quantar Digital Capable Station For Conventional, ASTRO 6809 Trunking, and IntelliRepeater Systems Instruction Manual Other system and radio / configuration service software manuals are available to support the product and system in operation. They can be provided to the Commission upon request. EXHIBIT 8 APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3773-D This exhibit contains the tune-up procedure as it will appear in the Configuration Service Software (CSS) manual. TUNE-UP PROCEDURE The following adjustments comprise the total transmitter alignment:
1. Reference Oscillator 2. Transmitter Power Output 3. Transmit Deviation Control 4. Reference Modulation Compensation Note: All adjustments are factory pre-set and do not require alignment under normal operating conditions. In the event alignment is needed, refer servicing to qualified radio maintenance personnel only. TEST EQUIPMENT Description Recommended model 1. Service Monitor 2. PC with CSS Motorola R-2001 or equivalent TRANSMITTER ALIGNMENT PROCEDURE CSS/RSS Port: A 9-pin D connector is provided on the station control module front panel to allow service personnel to connect a PC loaded with the Configuration Service Software (CSS) and perform programming and maintenance tasks via this TIA RS-232 port. The following pages of this exhibit will show the important alignment screens. EXHIBIT DESCRIPTION 9A 9B 9C 9D Reference Oscillator Alignment Screen Transmitter Power Output Alignment Screen Transmitter Deviation Alignment Screen Reference Modulation Compensation Alignment Screen All adjustments are software controlled and are pre-set at the factory. Certain station operating parameters can be changed via man-machine interface (MMI) commands, within predetermined limits. Examples include transmit /
receiver operating frequencies and power level. EXHIBIT 9 APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3773-D TUNE-UP PROCEDURE - Reference Oscillator Alignment Screen EXHIBIT 9A APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3773-D TUNE-UP PROCEDURE - Transmitter Power Output Alignment Screen EXHIBIT 9B APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3773-D TUNE-UP PROCEDURE - Transmitter Deviation Alignment Screen EXHIBIT 9C APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC3773-D TUNE-UP PROCEDURE - Reference Modulation Compensation Alignment Screen EXHIBIT 9D TM Digital-Capable Station For Conventional, ASTRO, 6809 Trunking, and IntelliRepeater Systems VHF 25W & 125W UHF 25W, 100W, & 110W 800 MHz 20W & 100W 900 MHz 100W PRELIMINARY Instruction Manual 68P81095E05-C COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this instruction manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this instruction manual may not be copied or reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product. EPS-34440-B COMMERCIAL WARRANTY
(STANDARD) Motorola radio communications products are warranted to be free from defects in material and workmanship for a period of ONE (1) YEAR, (except for crystals and channel elements which are warranted for a period of ten (10) years) from the date of shipment. Parts, including crystals and channel elements, will be replaced and labor will be provided free of charge for the full warranty period. Thereafter purchaser must pay for the labor involved in repairing the product or replacing the parts at the prevailing rates together with any transportation charges to or from the place where warranty service is provided. This express warranty is extended by Motorola Communications and Electronics, Inc., 1301 E. Algonquin Road, Schaumburg, Illinois 60196, to the original purchaser only, and only to those purchasing for purpose of leasing or solely for commercial, industrial, or governmental use. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED WHICH ARE SPECIFICALLY EXCLUDED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PAR TICULAR PURPOSE. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. In the event of a defect, malfunction or failure to conform to specifications established be seller, or if appropriate, to specifications accepted by Seller in writing, during the period shown, Motorola, at its option, will either repair or replace the product or refund the purchase price thereof, and such action on the part of Motorola shall be the full extent of Motorola's liability hereunder. This warranty is void if:
a. the product is used in other than its normal and customary manner;
b. the product has been subject to misuse, accident, neglect or damage;
c. unauthorized alterations or repairs have been made, or unapproved parts used in the equipment. This warranty extends only to individual products, batteries are excluded. Because each radio system is unique, Motorola disclaims liability for range, coverage, or operation of the system as a whole under this warranty except by a separate written agreement signed by an officer of Motorola. LICENSED PROGRAMS Motorola software provided in connection with this order is warranted to be free from re producible defects for a period of one (1) year. All material and labor to repair any such defects will be provided free of charge for the full warranty period, and SUBJECT TO THE DISCLAIMER IN BOLD FACE TYPE. Non-Motorola manufactured products are excluded from this warranty, but subject to the warranty provided by their manufacturers, a copy of which will be supplied to you on specific written request. In order to obtain performance of this warranty, purchaser must contact its Motorola salesperson or Motorola at the address first above shown, attention Quality Assurance Department. This warranty applies only within the United States. EPS-48759-O The FCC Requires that manuals pertaining to Class A and Class B computing devices must contain warnings about possible interference with local residential radio and TV reception. This warning reads as follows:
FCC INTERFERENCE WARNING NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer ence when the equipment is operated in a commercial or residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Commercial Government and Industrial Solutions Sector Digital-Capable Station for Conventional, ASTRO, 6809 Trunking, and IntelliRepeater Systems t VHF 25W & 125W UHF 25W, 100W, & 110W 800 MHz 20W & 100W 900 MHz 100W Table of Contents
. Model/Option Information Foreword General Safety Information Performance Specifications
. xi xxiv xxvi xxviii DESCRIPTION DESCRIPTION
. 68P81096E56 Introduction
. page 1 Compact Mechanical Design
. page 1 StateoftheArt Electrical Design
. page 2 Summary of Operating Features
. page 3 Multiple System Capability
. Station Components Functional Theory of Operation
. page 4 page 6 page 8 Transmitter Circuitry Operation
. page 8 Receiver Circuitry Operation
. page 9 Station Control Circuitry Operation
. page 9 Wireline Interface Board Operation
. page 10 Power Supply Module Operation
. page 10 INSTALLATION INSTALLATION
. 68P81096E57 Pre-Installation Considerations
. page 2 Installation Overview
. page 2 Environmental Conditions at Intended Site
. page 3 Equipment Ventilation
. page 3 AC Input Power Requirements
. page 4 Equipment Mounting Methods
. page 4 Site Grounding and Lightning Protection
. page 5 Recommended Tools and Equipment
. page 6 Equipment Unpacking and Inspection
. page 6 Physical Dimensions and Clearances
. page 7 continued on next page EMotorola, Inc. 2002 All Rights Reserved Printed in U.S.A. Commercial Government and Industrial Solutions Sector 1301 E. Algonquin Road, Schaumburg, IL 60196 68P81095E05-C 8/30/02-UP Mechanical Installation
. page 14 Unpacking the Equipment
. page 14 Mounting Procedures
. page 20 Stacking Cabinets
. page 25 Stacking Modular Racks
. page 26 Anti-Vibration/EMI Screws
. page 27 Electrical Connections
. page 28 Power Supply Connections
. page 28 RF Cabling Connections
. page 32 Connecting System Cables
. page 38 Connecting Telephone Lines
. page 46 Connecting V.24 Modems
. page 50 Connecting External Reference Post-Installation Checkout
. page 51 page 54 Applying Power
. page 54 Verifying Proper Operation
. page 54 Proceeding to Optimization
. page 56 OPTIMIZATION OPTIMIZATION
. 68P81086E72 Description
. page 1 OPERATION OPERATION
. 68P81096E58 Description
. page 1 Summary of Switches, Pushbuttons, and Connectors
. page 1 Summary of LED Indicators
. page 1 MAINTENANCE & TROUBLESHOOTING ROUTINE MAINTENANCE
. 68P81086E39 Introduction
. page 1 Routine Maintenance Overview
. Recommended Test Equipment
. TROUBLESHOOTING
. 68P81096E59 Introduction
. page 1 Troubleshooting Overview
. Recommended Test Equipment
. List of Test Equipment
. Troubleshooting Procedures
. Troubleshooting Overview Interpreting LED Indicators Interpreting Alarm Alert Tones Verifying Transmitter Circuitry Verifying Receiver Circuitry
. page 1 page 1 page 1 page 1 page 1 page 2 page 2 page 6 page 9 page 10 page 14 continued on next page ii 68P81095E05-C 8/30/02 Module Replacement Procedures General Replacement Information Replacing Power Amplifier Module Replacing Exciter Module Replacing Power Supply Module Replacing Station Control Module Replacing Wireline Interface Board Replacing Receiver Module and/or Preselector Assembly (VHF and UHF) Replacing Receiver Module (800 MHz and 900 MHz) Replacing ASTRO Modem Card Replacing Backplane Board
. Required Test Equipment VHF Tuning Procedure UHF Tuning Procedure page 19 page 19 page 21 page 22 page 23 page 24 page 30 page 32 page 33 page 34 page 35 page 36 page 36 page 37 page 40 Preselector Field Tuning Procedure STATION MODULES RECEIVER CIRCUITRY RECEIVER MODULE (VHF Ranges 1 and 2; Includes Preselector)
. 68P81086E28 Description
. General Description Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs Functional Theory of Operation
. Synthesizer and VCO Circuitry Preselector Filter Assembly Receiver Front End Circuitry Custom Receiver IC Circuitry Address Decode and A/D Converter Circuitry Voltage Regulator Circuitry
. RECEIVER MODULE (UHF)
. 68P81086E48 Description
. General Description Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs Functional Theory of Operation
. Synthesizer and VCO Circuitry Preselector Filter Assembly Receiver Front End Circuitry Custom Receiver IC Circuitry Address Decode and A/D Converter Circuitry Voltage Regulator Circuitry
. RECEIVER MODULE (800 MHz)
. 68P81086E76 Description
. General Description Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs Functional Theory of Operation
. Synthesizer and VCO Circuitry Receiver Front End Circuitry
. continued on next page 8/30/02 68P81095E05-C iii page 1 page 1 page 1 page 2 page 3 page 3 page 4 page 4 page 4 page 5 page 5 page 1 page 1 page 1 page 2 page 3 page 3 page 4 page 4 page 4 page 5 page 5 page 1 page 1 page 1 page 2 page 3 page 3 page 4 Custom Receiver IC Circuitry Address Decode and A/D Converter Circuitry Voltage Regulator Circuitry
. page 4 page 5 page 5 RECEIVER MODULE (900 MHz)
. 68P81091E92 Description
. page 1 General Description
. page 1 Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs
. Functional Theory of Operation
. Synthesizer and VCO Circuitry Receiver Front End Circuitry Custom Receiver IC Circuitry Address Decode and A/D Converter Circuitry Voltage Regulator Circuitry
. page 1 page 2 page 3 page 3 page 4 page 4 page 5 page 5 TRANSMITTER CIRCUITRY EXCITER BOARD (VHF, UHF, 800/900 MHz)
. 68P81086E24 Description
. page 1 General Description
. page 1 Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs
. page 1 page 2 Functional Theory of Operation
. page 3 Synthesizer and VCO Circuitry
. page 3 RF Switch Circuitry
. page 4 Microprocessor Circuitry
. page 4 TX Power Control Circuitry
. page 5 VHF POWER AMPLIFIER MODULE (25W/125W R1 & R2)
. 68P81086E23 Description
. page 1 General Description
. page 1 Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs
. page 1 page 2 Functional Theory of Operation
. page 3 RF Signal Path
. page 3 Output Power Control
. page 3 Sense and Detect Circuitry
. page 4 Cooling Fans Control Circuitry
. page 6 UHF POWER AMPLIFIER MODULE (R0/110W; R1 & R2/25W; R1-3/110W; R4/100W) 68P81088E44 Description
. page 1 General Description
. page 1 Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs
. page 1 page 2 Functional Theory of Operation
. page 3 RF Signal Path
. page 3 Output Power Control
. page 3 Sense and Detect Circuitry
. page 4 Cooling Fans Control Circuitry
. page 6 iv 68P81095E05-C 8/30/02 POWER AMPLIFIER MODULE (20W/100W 800 MHz; 100W 900 MHz;)
. 68P81091E91 Description
. page 1 General Description
. page 1 Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs Functional Theory of Operation
. page 1 page 2 page 3 RF Signal Path
. page 3 Output Power Control
. page 3 Sense and Detect Circuitry
. page 4 Cooling Fans Control Circuitry
. page 6 STATION CONTROL CIRCUITRY STATION CONTROL MODULE (CLN6960/CLN6961)
. 68P81094E76 Description
. page 1 General Description
. page 1 Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs Functional Theory of Operation
. page 2 page 3 page 4 Host Microprocessor/Host ASIC Circuitry
. page 4 Non-Volatile Memory
. page 5 DRAM Memory
. page 5 External Line Interface Circuitry
. page 6 Digital Signal Processor (DSP) and DSP ASIC Circuitry
. page 7 Station Reference Circuitry
. page 8 HDLC Bus Control Circuitry
. page 8 Audio Interface Circuitry
. page 9 Input/Output Ports
. page 10 6809/MRTI Interface Circuitry
. page 10 Front Panel LEDs and Switches
. page 11 Supply Voltages Circuitry
. page 11 STATION CONTROL MODULE (CLN1614)
. 68P81096E87 Description
. page 1 General Description
. page 1 Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs Functional Theory of Operation (CLN7060A Control Board)
. page 2 page 4 page 6 Host Microprocessor/Host ASIC Circuitry
. page 6 Non-Volatile Memory
. page 7 DRAM Memory
. page 7 External Line Interface Circuitry
. page 8 Digital Signal Processor (DSP) and DSP ASIC Circuitry
. page 9 Station Reference Circuitry
. page 10 HDLC Bus Control Circuitry
. page 10 Audio Interface Circuitry
. page 11 Input/Output Ports
. page 12 6809/MRTI Interface Circuitry
. page 12 Supply Voltages Circuitry
. page 13 continued on next page 8/30/02 68P81095E05-C v Functional Theory of Operation (CLN7098A LED Board)
. page 14 page 14 Front Panel LEDs and Switches Front Panel Connectors
. page 14 WIRELINE CIRCUITRY WIRELINE INTERFACE BOARD (4-WIRE)
. 68P81094E77 Description
. General Description Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs Functional Theory of Operation
. page 1 page 1 page 1 page 2 page 3 Functional Overview
. page 3 Description of Audio/Data Signal Paths
. page 7 WIRELINE INTERFACE MODULE (8-WIRE)
. 68P81094E78 Description
. page 1 General Description
. page 1 Overview of Circuitry
. Controls, Indicators, and Inputs/Outputs Functional Theory of Operation
. Functional Overview
. page 1 page 2 page 3 page 3 Description of Audio/Data Signal Paths
. page 7 STATION BACKPLANE STATION BACKPLANE BOARD
. 68P81086E33 Description
. General Description
. Location of Backplane Connectors Backplane Connectors Information
. STATION POWER SUPPLY MODULES 265W POWER SUPPLY MODULE (ac input)
. 68P81096E09 Description
. General Description
. Power Supply Module Simplified Block Diagram
. page 2 Overview of Circuitry
. Performance Specifications Controls, Indicators, and Inputs/Outputs Functional Theory of Operation (ACtoDC Converter Board)
. Input Conditioning Circuitry
. page 8 Startup Delay Circuitry
. page 8 Boost/Power Factor Correction Circuitry
. page 9 Battery Revert Trigger Circuitry
. page 9 VCC Supply Circuitry
. page 9 LED Status Indicators Functional Theory of Operation (DCtoDC Converter Board)
. page 10 page 11
+14V Main Supply Circuitry
. page 11 continued on next page vi 68P81095E05-C 8/30/02 page 1 page 1 page 2 page 3 page 1 page 1 page 3 page 6 page 7 page 8
+5V Supply Circuitry
. page 12 Battery Charger Control Circuitry
. page 12 Reference Voltage Circuitry
. page 12 Diagnostics Circuitry
. page 13 Address Decode Circuitry
. page 13 Startup/Shutdown Control Circuitry Functional Theory of Operation (Battery Charger/Revert Board)
. page 14 page 15 Charger Supply Circuitry
. page 15 Pulse Width Modulator Circuitry
. page 16 Battery Revert Circuitry
. page 16 Current Mode Controller Circuitry
. page 16 SPI Bus Interface Circuitry
. page 17 Shutdown Circuitry
. page 17 Local Supplies Circuitry
. page 17 625W POWER SUPPLY MODULE (ac input)
. 68P81095E88 Description Performance Specifications
. page 1 page 6 page 7 page 8 Functional Theory of Operation (ACtoDC Converter Board) Controls, Indicators, and Inputs/Outputs Input Conditioning Circuitry
. page 8 Startup Delay Circuitry
. page 8 Boost/Power Factor Correction Circuitry
. page 9 Battery Revert Trigger Circuitry
. page 9 VCC Supply Circuitry
. page 9 LED Status Indicators Functional Theory of Operation (DCtoDC Converter Board)
. page 10 page 11
+28V Main Supply Circuitry
. page 11
+14V Supply Circuitry
. page 12
+5V Supply Circuitry
. page 12 Battery Charger Control Circuitry
. page 13 Reference Voltage Circuitry
. page 13 Diagnostics Circuitry
. page 13 Address Decode Circuitry
. page 14 Startup/Shutdown Control Circuitry Functional Theory of Operation (Battery Charger/Revert Board)
. page 14 page 15 Charger Supply Circuitry
. page 15 Pulse Width Modulator Circuitry
. page 16 Battery Revert Circuitry
. page 16 Current Mode Controller Circuitry
. page 16 SPI Bus Interface Circuitry
. page 17 Shutdown Circuitry
. page 17 Local Supplies Circuitry
. page 17 210W POWER SUPPLY MODULE (12/24 and 48/60 V dc input)
. 68P81085E12 Description
. page 1 General Description
. page 1 Overview of Circuitry
. Performance Specifications
. continued on next page page 2 page 3 8/30/02 68P81095E05-C vii Controls, Indicators, and Inputs/Outputs Functional Theory of Operation
. page 4 page 5 Input Conditioning Circuitry
. page 5 Startup Inverter Circuitry
. page 6 Main Inverter Circuitry
. page 6
+5 V Inverter Circuitry
. page 7 Diagnostics Circuitry
. page 8 Address Decode Circuitry
. page 8 600W POWER SUPPLY MODULE (24 V dc input)
. 68P81090E44 Description Performance Specifications Controls, Indicators, and Inputs/Outputs Functional Theory of Operation
. page 1 page 3 page 4 page 5 Input Conditioning Circuitry
. page 5 Startup Inverter Circuitry
. page 6 Main Inverter Circuitry
. page 6
+14.2 V Inverter Circuitry
. page 7
+5 V Inverter Circuitry
. page 7 Diagnostics Circuitry
. page 8 Address Decode Circuitry
. 600W POWER SUPPLY MODULE (48/60 V dc input)
. page 8 68P81096E84 Description
. page 1 General Description
. page 1 Power Supply Module Simplified Block Diagram
. page 2 Overview of Circuitry
. Performance Specifications Controls, Indicators, and Inputs/Outputs Functional Theory of Operation (DC Input Board)
. Input Conditioning Circuitry
. page 6 Inverter Circuitry A and B
. page 7 Ouput Filter Circuitry
. Functional Theory of Operation (DC Output Board)
. page 3 page 4 page 5 page 6 page 7 page 8 Inverters A/B Control Circuitry
. page 8
+14.2 V Supply Circuitry
. page 9
+5 V Supply Circuitry
. page 9 Reference Voltage Circuitry
. page 9 Diagnostics Circuitry
. page 10 Address Decode Circuitry
. page 10 Startup/Shutdown Control Circuitry
. page 11 ANCILLARY EQUIPMENT ANTENNA RELAY OPTION ANTENNA RELAY (Option X371AA)
. 68P81086E22 Description
. page 1 General Description
. Input and Output Connections Option Complement
. continued on next page page 1 page 2 page 3 viii 68P81095E05-C 8/30/02 Performance Specifications Mounting Locations Functional Theory of Operation
. page 3 page 4 page 5 TRIPLE CIRCULATOR OPTIONS VHF TRIPLE CIRCULATOR OPTION (Options X676AA-AC)
. 68P81086E34 Description
. page 1 General Description
. Options Complement Performance Specifications
. Inputs/Outputs Functional Theory of Operation page 1 page 2 page 3 page 4 page 5 UHF TRIPLE CIRCULATOR OPTION (Options X676AN and X676AP)
. 68P81088E54 Description
. page 1 General Description Option Complement Performance Specifications Inputs/Outputs
. page 1 page 2 page 3 page 4 Functional Theory of Operation page 5 800/900 MHz TRIPLE CIRCULATOR OPTION (Options X676AR and X676AQ) 68P81090E86 Description
. page 1 General Description Option Complement
. page 1 page 2 page 2 page 3 page 4 Performance Specifications Inputs/Outputs Functional Theory of Operation DUPLEXER OPTIONS VHF DUPLEXERS (OPTIONS X182AA, AB, AJ)
. 68P81086E71 Description
. page 1 General Description
. Adjustments and Inputs/Outputs Performance Specifications Typical Mounting Configuration Field Tuning Procedure
. UHF DUPLEXER (Options X182AC thru X182AF)
. 68P81087E94 Description
. page 1 General Description
. Inputs/Outputs Performance Specifications Typical Mounting Configuration
. Field Tuning Procedure Field Tuning Overview
. page 6 Required Test Equipment
. page 6 Setting Up for Tuning Duplexer
. page 7 Duplexer Tuning Procedure
. page 8 8/30/02 68P81095E05-C ix page 1 page 2 page 3 page 3 page 6 page 1 page 2 page 3 page 4 page 6 800/900 MHz DUPLEXERS (Options X182AG and X182AH)
. 68P81091E93 Description
. General Description
. Inputs/Outputs Performance Specifications Typical Mounting Configuration
. page 1 page 1 page 2 page 3 page 3 MODEM OPTION ASTRO MODEM CARD (OPTION X437AA)
. 68P81086E38 Description
. page 1 General Description
. page 1 PERIPHERAL TRAY OPTION PERIPHERAL TRAY (OPTION X696AA)
. 68P81086E37 Description
. General Description
. Options Complement Peripheral Tray Contents and Inputs/Outputs
. page 1 page 1 page 2 page 3 UHSO OPTION ULTRA HIGH STABILITY OSCILLATOR (UHSO; Option X873AA)
. 68P81088E08 Description
. page 1 General Description
. Inputs/Outputs Functional Theory of Operation
. page 1 page 2 page 3 SYSTEM APPLICATIONS RA/RT CONFIGURATION (TRC CONTROL)
. 68P81090E98 Overview Electrical Connections (RF Link)
. page 1 page 2 Console to Station 1 Wiring Connections
. page 2 Station 2 to Station 3 Wiring Connections
. Electrical Connections (Microwave Link)
. Console to Microwave Station 1 Wiring Connections
. page 4 Microwave Station 2 to Station 3 Wiring Connections
. RSS Programming TX Wireline Alignment
. Station 1 TX Wireline Alignment
. page 3 page 4 page 5 page 6 page 7 page 7 Station 2 TX Wireline Alignment
. page 7 Station 3 TX Wireline Alignment
. page 8 RA/RT CONFIGURATION (E & M Keying)
. 68P81090E99 Overview Electrical Connections (RF Link)
. page 1 page 2 Console to Station 1 Wiring Connections
. page 2 Station 2 to Station 3 Wiring Connections
. page 3 continued on next page x 68P81095E05-C 8/30/02 Electrical Connections (Microwave Link)
. Console to Microwave Station 1 Wiring Connections Microwave Station 2 to Station 3 Wiring Connections
. RSS Programming TX Wireline Alignment
. Station 1 TX Wireline Alignment
. page 5 page 5 page 6 page 8 page 9 page 9 Station 2 TX Wireline Alignment
. page 9 Station 3 TX Wireline Alignment
. page 10 FALL BACK INCABINET REPEAT FEATURE
. 68P81095E96 Overview Configuring the FBICR Feature
. page 1 page 4 MAIN / STANDBY CONFIGURATION
. 68P81095E89 Overview Electrical Connections Setting Wireline Impedance Jumpers RSS Programming Main/Standby Operation Customizing Main/Standby Operation
. page 1 page 2 page 4 page 5 page 6 page 8 FAST KEYUP FEATURE
. 68P80800A02 Overview Electrical Connections RSS Programming Fast Keyup Performance Characteristics
. page 1 page 2 page 4 page 5 DUAL CONTROL OF GATED ADDESS VIA TRC AND SAM
. 68P81096E11 Overview Station RSS Programming SAM RSS Programming
. page 1 page 4 page 8 INPUT/OUTPUT SPECIFICATIONS FOR EXTERNAL CONTROLLERS
. 68P81096E86 Overview Electrical Connections Electrical Characteristics Editing Wildcard Tables
. page 1 page 2 page 3 page 8 SERIAL INTERFACE SPECIFICATIONS
. 68P81131E57 Overview Making Serial Connection to Station Entering `'RSS Mode"
Supported Commands Important Things to Know
. page 1 page 1 page 3 page 4 page 12
, MOTOROLA, QUANTAR, and ASTRO are trademarks of Motorola, Inc. 8/30/02 68P81095E05-C xi MODEL AND OPTION SELECTION PROCEDURE
(INCLUDES MODEL/OPTION COMPLEMENTS) The following equipment ordering scenario is used by the sales representative to equip a Quantar station with the proper hardware and firmware for specific system types and customerdefined options and fea tures. The scenario is described here to explain the process and to show the structure and contents of the various options and models. 1 2 The sales model is T5365A (as translated from C99ED/001C). NOTE: The Sales Model includes only a TRN7795A Base Station Nameplate. Equip ping the station with the proper modules is accomplished by ordering additional op tions, as described in the following steps. A System Family Option must be selected as follows:
System Type Family Option VHF UHF 800 MHZ 900 MHZ Conventional Analog Conventional ASTRO VSELP Conventional ASTRO CAI 6809 Trunking Analog 6809 Trunking ASTRO VSELP 6809 Trunking ASTRO CAI SMARTZONE 6809 Trunking ASTRO VSELP SMARTZONE 6809 Trunking ASTRO CAI SMARTZONE IntelliRepeater Trunking SMARTZONE IntelliRepeater ASTRO VSELP SMARTZONE IntelliRepeater ASTRO CAI X597 X599 X806 X997 X992 X900 X989 X897 X999 X990 X898 n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n
(Continued) xii 68P81095E05-C 8/30/02 3 The following tables show the available power and band options. Output Power Frequency Range VHF High Band Range 1
(132-154 MHz) VHF High Band Range 2
(150-174 MHz) VHF 25W 125W Option X330AA Option X530AA Option X530AB NOTE: Customer-specified frequencies which are in the 150-154 MHz range are automatically assigned to Range 2 by Order Processing unless one of the following options is ordered:
X325 (125W only) Specifies Range 1 Exciter (overrides automatic assignment to Range 2) where the transmit frequency is between 150 and 154 MHz. X326 Specifies Range 1 Receiver (overrides automatic assignment to Range 2) where the receive fre quency is between 150 and 154 MHz. These options are typically used to ensure that the transmit and receive frequencies are in the required customer range; this is required for use with a duplexer module. UHF Output Power Frequency Range UHF Range 0
(380-433 MHz) UHF Range 1
(403-433 MHz) UHF Range 2
(438-470 MHz) UHF Range 3
(470-494 MHz) UHF Range 4
(494-520 MHz) 25W 100W 110W Not Available Not Available Option X240AA Option X240AB Not Available Not Available Not Available Not Available Option X640AK Option X640AA Option X640AB Option X640AC Not Available Option X640AD Not Available 800/900 MHz Output Power Frequency Range 800 MHz 20W Option X250AA 900 MHz Not Available 100W Option X750AA Option X660AA
(Continued) 8/30/02 68P81095E05-C xiii 4 If no other options are selected, Motorola's Order Processing appends the appropriate stan dard options (based on power and frequency band) to complete the station equipment list. The tables below show the completed equipment lists for the available options. If additional options are desired, they must be added to the initial order form. Step 5 lists the available options and the impact each has on the standard equipment configuration. VHF OPTION X330AA SELECTED IN STEP 3
(VHF Range 1; 25W Transmitter) OPTION X330AA SELECTED IN STEP 3
(VHF Range 2; 25W Transmitter) Option/
Kit X330AA Source Option from Initial Sales Order Description Source Description Option/
Kit X330AA VHF High Band Ranges 1 & 2; 25W Transmitter 25 W Power Amplifier Module (VHF R1 & R2) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TLD3110B TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) Option from Initial Sales Order VHF High Band Ranges 1 & 2; 25W Transmitter 25 W Power Amplifier Module (VHF R1 & R2) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TLD3110B TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) X131AA Exciter Module (VHF HighBand Range 1) Exciter Module (Board and Hardware) CLD1270A CHN6100A AntiVibration/EFI Screws (2) X131AB Exciter Module (VHF HighBand Range 2) Exciter Module (Board and Hardware) CLD1280A CHN6100A AntiVibration/EFI Screws (2) X333AA Receiver Module (VHF HighBand Range 1) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLD1250A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X333AB Receiver Module (VHF HighBand Range 2) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLD1260A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X43AB Power Supply Assembly CPN1049B 265W Power Supply (AC input; w/o battery chrg) CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) Options/Kits Internally Added by Motorola Order Processing X43AB Power Supply Assembly CPN1049B 265W Power Supply (AC input; w/o battery chrg) CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) X216AA Wireline Interface Module (WIM) (4-wire) X216AA Wireline Interface Module (WIM) (4-wire) Options/Kits Internally Added by Motorola Order Processing CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") X142AA Duplex Interface Assembly X142AA Duplex Interface Assembly TRN7494A Duplex Interface (includes ant. connector bracket) TRN7494A Duplex Interface (includes ant. connector bracket) X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X362AA TBN6625A Packing Packing for 12" Cabinet X436AA 68P81095E05 Quantar Station Functional Manual Instruction Manual X362AA TBN6625A Packing Packing for 12" Cabinet X436AA 68P81095E05 Quantar Station Functional Manual Instruction Manual
(Continued) xiv 68P81095E05-C 8/30/02 VHF OPTION X530AA SELECTED IN STEP 3
(VHF Range 1; 125W Transmitter) OPTION X530AB SELECTED IN STEP 3
(VHF Range 2; 125W Transmitter) Option/
Kit X530AA Source Option from Initial Sales Order Description Source Description Option/
Kit X530AB VHF High Band Range 1; 125W Transmitter 125 W Power Amplifier Module (VHF R1) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TLD3101F TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) Option from Initial Sales Order VHF High Band Range 2; 125W Transmitter 125 W Power Amplifier Module (VHF R2) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TLD3102F TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) X131AA Exciter Module (VHF HighBand Range 1) Exciter Module (Board and Hardware) CLD1270A CHN6100A AntiVibration/EFI Screws (2) X131AB Exciter Module (VHF HighBand Range 2) Exciter Module (Board and Hardware) CLD1280A CHN6100A AntiVibration/EFI Screws (2) X333AA Receiver Module (VHF HighBand Range 1) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLD1250A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X333AB Receiver Module (VHF HighBand Range 2) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLD1260A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X43AA Power Supply Assembly 625W Power Supply (AC input; w/o battery chrg) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector CPN1047A CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) X43AA Power Supply Assembly 625W Power Supply (AC input; w/o battery chrg) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector CPN1047A CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) Options/Kits Internally Added by Motorola Order Processing Options/Kits Internally Added by Motorola Order Processing X216AA Wireline Interface Module (WIM) (4-wire) X216AA Wireline Interface Module (WIM) (4-wire) CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") X142AA Duplex Interface Assembly X142AA Duplex Interface Assembly TRN7494A Duplex Interface (includes ant. connector bracket) TRN7494A Duplex Interface (includes ant. connector bracket) X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X362AA TBN6625A Packing Packing for 12" Cabinet X436AA 68P81095E05 Quantar Station Functional Manual Instruction Manual X362AA TBN6625A Packing Packing for 12" Cabinet X436AA 68P81095E05 Quantar Station Functional Manual Instruction Manual
(Continued) 8/30/02 68P81095E05-C xv UHF OPTION X640AK SELECTED IN STEP 3
(Quantar UHF; Range 0, 110W Transmitter) Source Option from Initial Sales Order Options/Kits Internally Added by Motorola Order Processing Option/
Kit X640AK Description Quantar UHF R0; 110W Transmitter 110 W Power Amplifier Module (UHF R0) PAtoExciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel CTX1146A TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) X132AV Exciter Module (UHF, R0) Exciter Module (Board and Hardware) CLX1000A CHN6100A AntiVibration/EFI Screws (2) X334BB Receiver Module (UHF, R0) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel w/Tuning Screw Cover VHF/UHF Tuning Kit CRX1027A CLN7884A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X43AA Power Supply Assembly 625W Power Supply (AC input; w/o battery chrg) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector CPN1047E CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) X621AB Station Control Module (SCM); Standard EPIC II CLN6961D Station Control Module TRN7476A TKN8751A SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) Station Control Module Front Panel TGN6157A CHN6100A AntiVibration/EFI Screws (2) X216AA Wireline Interface Module (WIM) (4-wire) CLN6955B Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") X142AA Duplex Interface Assembly TRN7494A Duplex Interface (includes ant. connector bracket) X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040B Grommet X362AA TBN6625A Packing Packing for 12" Cabinet X436AJ 68P81095E05 Quantar Station Functional Manual Instruction Manual
(Continued) xvi 68P81095E05-C 8/30/02 UHF OPTION X240AA SELECTED IN STEP 3
(Quantar UHF; Range 1, 25W Transmitter) OPTION X640AA SELECTED IN STEP 3
(Quantar UHF; Range 1, 110W Transmitter) Option/
Kit X240AA Source Option from Initial Sales Order Description Source Description Option/
Kit X640AA Quantar UHF R1; 25W Transmitter 25 W Power Amplifier Module (UHF R1) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TLE2731A TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) Option from Initial Sales Order Quantar UHF R1; 110W Transmitter 110 W Power Amplifier Module (UHF R1) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TTE2061A TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) X132AA Exciter Module (UHF, R1) Exciter Module (Board and Hardware) CLE1230A CHN6100A AntiVibration/EFI Screws (2) X132AA Exciter Module (UHF, R1) Exciter Module (Board and Hardware) CLE1230A CHN6100A AntiVibration/EFI Screws (2) X334AA Receiver Module (UHF, R1) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLE1190A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X43AB Power Supply Assembly CPN1049B 265W Power Supply (AC input; w/o battery chrg) CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) Options/Kits Internally Added by Motorola Order Processing X334AA Receiver Module (UHF, R1) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLE1190A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X43AA Power Supply Assembly 625W Power Supply (AC input; w/o battery chrg) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector CPN1047A CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) Options/Kits Internally Added by Motorola Order Processing X216AA Wireline Interface Module (WIM) (4-wire) X216AA Wireline Interface Module (WIM) (4-wire) CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") X142AA Duplex Interface Assembly X142AA Duplex Interface Assembly TRN7494A Duplex Interface (includes ant. connector bracket) TRN7494A Duplex Interface (includes ant. connector bracket) X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X362AA TBN6625A Packing Packing for 12" Cabinet X436AJ 68P81095E05 Quantar Station Functional Manual Instruction Manual X362AA TBN6625A Packing Packing for 12" Cabinet X436AJ 68P81095E05 Quantar Station Functional Manual Instruction Manual
(Continued) 8/30/02 68P81095E05-C xvii UHF OPTION X240AB SELECTED IN STEP 3
(Quantar UHF; Range 2, 25W Transmitter) OPTION X640AB SELECTED IN STEP 3
(Quantar UHF; Range 2, 110W Transmitter) Option/
Kit X240AB Source Option from Initial Sales Order Description Source Description Option/
Kit X640AB Quantar UHF R2; 25W Transmitter 25 W Power Amplifier Module (UHF R2) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TLE2732A TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) Option from Initial Sales Order Quantar UHF R2; 110W Transmitter 110 W Power Amplifier Module (UHF R2) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TTE2062A TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) X132AB Exciter Module (UHF, R2) Exciter Module (Board and Hardware) CLE1240A CHN6100A AntiVibration/EFI Screws (2) X132AB Exciter Module (UHF, R2) Exciter Module (Board and Hardware) CLE1240A CHN6100A AntiVibration/EFI Screws (2) X334AB Receiver Module (UHF, R2) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLE1200A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X43AB Power Supply Assembly CPN1049B 265W Power Supply (AC input; w/o battery chrg) CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) Options/Kits Internally Added by Motorola Order Processing X334AB Receiver Module (UHF, R2) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLE1200A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X43AA Power Supply Assembly 625W Power Supply (AC input; w/o battery chrg) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector CPN1047A CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) Options/Kits Internally Added by Motorola Order Processing X216AA Wireline Interface Module (WIM) (4-wire) X216AA Wireline Interface Module (WIM) (4-wire) CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") X142AA Duplex Interface Assembly X142AA Duplex Interface Assembly TRN7494A Duplex Interface (includes ant. connector bracket) TRN7494A Duplex Interface (includes ant. connector bracket) X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X362AA TBN6625A Packing Packing for 12" Cabinet X436AJ 68P81095E05 Quantar Station Functional Manual Instruction Manual X362AA TBN6625A Packing Packing for 12" Cabinet X436AJ 68P81095E05 Quantar Station Functional Manual Instruction Manual
(Continued) xviii 68P81095E05-C 8/30/02 UHF OPTION X640AC SELECTED IN STEP 3
(Quantar UHF; Range 3, 110W Transmitter) OPTION X640AD SELECTED IN STEP 3
(Quantar UHF; Range 4, 100W Transmitter) Option/
Kit X640AC Source Option from Initial Sales Order Description Source Description Option/
Kit X640AD Quantar UHF R3; 110W Transmitter 110 W Power Amplifier Module (UHF R3) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TTE2063A TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) Option from Initial Sales Order Quantar UHF R4; 100W Transmitter 100 W Power Amplifier Module (UHF R4) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TTE2064A TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) X132AC Exciter Module (UHF, R3) Exciter Module (Board and Hardware) CLE1250A CHN6100A AntiVibration/EFI Screws (2) X132AD Exciter Module (UHF, R4) Exciter Module (Board and Hardware) CLE1260A CHN6100A AntiVibration/EFI Screws (2) X334AC Receiver Module (UHF, R3) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLE1210A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X334AD Receiver Module (UHF, R4) Receiver Module (Board, Preselector, Hardware) Receiver Module Front Panel VHF/UHF Tuning Kit CLE1220A CLN7334A TRN7799A CHN6100A AntiVibration/EFI Screws (2) X43AA Power Supply Assembly 625W Power Supply (AC input; w/o battery chrg) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector CPN1047A CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) X43AA Power Supply Assembly 625W Power Supply (AC input; w/o battery chrg) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector CPN1047A CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) Options/Kits Internally Added by Motorola Order Processing Options/Kits Internally Added by Motorola Order Processing X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) X216AA Wireline Interface Module (WIM) (4-wire) X216AA Wireline Interface Module (WIM) (4-wire) CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") X142AA Duplex Interface Assembly X142AA Duplex Interface Assembly TRN7494A Duplex Interface (includes ant. connector bracket) TRN7494A Duplex Interface (includes ant. connector bracket) X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X187AA TRN7663A Domestic Power Cable AC Line Cord X163AD Blank Panels TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X362AA TBN6625A Packing Packing for 12" Cabinet X436AJ 68P81095E05 Quantar Station Functional Manual Instruction Manual X362AA TBN6625A Packing Packing for 12" Cabinet X436AJ 68P81095E05 Quantar Station Functional Manual Instruction Manual
(Continued) 8/30/02 68P81095E05-C xix 800 MHz OPTION X250AA SELECTED IN STEP 3
(800 MHz Quantar; 20W Transmitter) OPTION X750AA SELECTED IN STEP 3
(800 MHz Quantar; 100W Transmitter) Option/
Kit X250AA Source Option from Initial Sales Order Description Source Description Option/
Kit X750AA Quantar 800 MHz; 20W Transmitter 20 W Power Amplifier Module (800 MHz) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TLF1940A TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) Option from Initial Sales Order Quantar 800 MHz; 100W Transmitter 100 W Power Amplifier Module (800 MHz) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TLF1930C TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) X133AA Exciter Module (800 MHz) Exciter Module (Board and Hardware) CLF1510A CHN6100A AntiVibration/EFI Screws (2) X133AA Exciter Module (800 MHz) Exciter Module (Board and Hardware) CLF1510A CHN6100A AntiVibration/EFI Screws (2) X335AA Receiver Module (800 MHz) Receiver Module (Board, Front Panel, Hardware) CLF1530A CHN6100A AntiVibration/EFI Screws (2) X335AA Receiver Module (800 MHz) Receiver Module (Board, Front Panel, Hardware) CLF1530A CHN6100A AntiVibration/EFI Screws (2) X43AB Power Supply Assembly CPN1049B 265W Power Supply (AC input; w/o battery chrg) CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable X43AA Power Supply Assembly 625W Power Supply (AC input; w/o battery chrg) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector CPN1047A CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable Options/Kits Internally Added by Motorola Order Processing X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) X216AA Wireline Interface Module (WIM) (4-wire) Options/Kits Internally Added by Motorola Order Processing X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) X216AA Wireline Interface Module (WIM) (4-wire) CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") X142AA Duplex Interface Assembly X142AA Duplex Interface Assembly TRN7494A Duplex Interface (includes ant. connector bracket) TRN7494A Duplex Interface (includes ant. connector bracket) X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X187AA TRN7663A Domestic Power Cable AC Line Cord X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X187AA TRN7663A Domestic Power Cable AC Line Cord X163AL Blank Panels Single Slot Wide Blank Panel TRN7695A TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X163AL Blank Panels Single Slot Wide Blank Panel TRN7695A TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X362AA TBN6625A Packing Packing for 12" Cabinet X436AH 68P81095E05 Quantar Station Functional Manual Instruction Manual X362AA TBN6625A Packing Packing for 12" Cabinet X436AH 68P81095E05 Quantar Station Functional Manual Instruction Manual
(Continued) xx 68P81095E05-C 8/30/02 900 MHz OPTION X660AA SELECTED IN STEP 3
(900 MHz; 100W Transmitter) Description Option/
Kit X660AA Source Option from Initial Sales Order Quantar 900 MHz; 100W Transmitter 100 W Power Amplifier Module (900 MHz) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel TLF1800B TKN8699A TRN7480A TRN7708A CHN6100A AntiVibration/EFI Screws (2) X134AA Exciter Module (900 MHz) Exciter Module (Board and Hardware) CLF1520A CHN6100A AntiVibration/EFI Screws (2) X336AA Receiver Module (900 MHz) Receiver Module (Board, Front Panel, Hardware) CLF1540A CHN6100A AntiVibration/EFI Screws (2) X43AA Power Supply Assembly 625W Power Supply (AC input; w/o battery chrg) Ferrite RFI Suppressor Front Panel, Dummy Charger Connector CPN1047A CLN7261A CPN6086A CHN6100A AntiVibration/EFI Screws (2) X621AY CLN1614A TRN7476A TKN8751A Station Control Module (SCM); Standard EPIC III Station Control Module SCM Internal Speaker Internal Speaker Cable Options/Kits Internally Added by Motorola Order Processing X222AB Front Panel (Station Control Module) CGN6157A Station Control Module Front Panel CHN6100A AntiVibration/EFI Screws (2) X216AA Wireline Interface Module (WIM) (4-wire) CLN6955A Wireline Interface Board TKN8731A WIM Cable CLN6816A RFI Suppressor C831AA Card Cage TRN7479A Card Cage Assembly (12") X142AA Duplex Interface Assembly TRN7494A Duplex Interface (includes ant. connector bracket) X249AW TKN8753A TKN9126A RF Cabling Receiver mini-UHF to N-type coax cable Transmitter N-type to N-type coax cable X187AA TRN7663A Domestic Power Cable AC Line Cord X163AL Blank Panels Single Slot Wide Blank Panel TRN7695A TRN7696A Dual Slot Wide Blank Panel CHN6100A AntiVibration/EFI Screws (2) X842AB CLN6885A Ethernet Termination Kit Ethernet Termination Hardware X430AA 12" Cabinet 12" x 20" Cabinet THN6700A TTN5040A Grommet X362AA TBN6625A Packing Packing for 12" Cabinet X436AD 68P81095E05 Quantar Station Functional Manual Instruction Manual
(Continued) 8/30/02 68P81095E05-C xxi 5 The following lists available options that may be selected in addition to the standard model and options (described in Steps 1 thru 4). AVAILABLE HARDWARE OPTIONS FOR QUANTAR STATION Option Category Option and Complement AC Input Supplies DC Input Supplies 625W Power Supply with Battery Charger X30AA CPN1048C 625W Power Supply Assembly w/ Battery Charger TKN8732A Battery Charger Cable Kit TKN8786A Battery Temperature Sensor TRN5155A 10' Extension Cable w/connectors and fuse block CHN6100A AntiVibration/EFI Screws (2) CLN7261A AC Line Cord Ferrite RFI Suppressor CLN7419A Power Supply Front Panel w/Screws 265W Power Supply with Battery Charger X30AB CPN1050E 265W Power Supply Assembly w/ Battery Charger TKN8732A Battery Charger Cable Kit TKN8786A Battery Temperature Sensor TRN5155A 10' Extension Cable w/connectors and fuse block CHN6100A AntiVibration/EFI Screws (2) CLN7261A AC Line Cord Ferrite RFI Suppressor CPN6086A Power Supply Front Panel w/Screws Power Supply Wireline Interface Module Antenna Relay X84AA Omit Standard Wireline Interface Module (WIM) X144AA Add 8-Wire Wireline Interface Module (WIM) CLN6956A 8-Wire Wireline Interface Board (WIB) TKN8731A WIM Cable Kit CLN6816A RFI Suppressor X371AA Add Antenna Relay TRN7664A Antenna Relay, Cables, and Mounting Hardware X182BV Add Duplexer Module (UHF R0) 0185417U10 Duplexer (UHF R0; 380-412 MHz) TTN5008A Duplexer Mtg Hdwr X182AC Add Duplexer Module (UHF R1) 0185417U04 Duplexer (UHF R1) TTN5008A Duplexer Mtg Hdwr Duplexer X182AD Add Duplexer Module (UHF R2) 0185417U05 Duplexer (UHF R2) TTN5008A Duplexer Mtg Hdwr X182AE X182AF Add Duplexer Module (UHF R3) 0185417U06 Duplexer (UHF R3) TTN5008A Duplexer Mtg Hdwr Add Duplexer Module (UHF R4) 0185417U07 Duplexer (UHF R4) TTN5008A Duplexer Mtg Hdwr Modem X437AA Add ASTRO Modem TRN7668A ASTRO Modem Card 210W Power Supply (12/24V DC Input) X121AA TRN7802A 210W Power Supply Assembly (12/24 V DC Input) TKN8732A Battery Charger Cable Kit TRN5155A 10' Extension Cable w/connectors and fuse block CHN6100A AntiVibration/EFI Screws (2) 600W Power Supply (24V DC Input) X112AA TRN7801A 600W Power Supply Assembly (24 V DC Input) TKN8732A Battery Charger Cable Kit TRN5155A 10' Extension Cable w/connectors and fuse block CHN6100A AntiVibration/EFI Screws (2) 210W Power Supply (48/60 V DC Input) X113AA TRN7803A 210W Power Supply Assembly (48/60 V DC Input) TKN8732A Battery Charger Cable Kit TRN5155A 10' Extension Cable w/connectors and fuse block CHN6100A AntiVibration/EFI Screws (2) 600W Power Supply (48/60 V DC Input) X113AB CPN1031B 600W Power Supply Assembly (48/60 V DC Input) TKN8732A Battery Charger Cable Kit TRN5155A 10' Extension Cable w/connectors and fuse block TTN4068A Power Supply Front Panel and Screws CHN6100A AntiVibration/EFI Screws (2) X182AA X182AB X182AJ Add Duplexer Module (132-146 MHz) 0185417U01 Duplexer (132-146 MHz) TTN5008A Duplexer Mtg Hdwr Add Duplexer Module (144-160MHz) 0185417U02 Duplexer (144-160 MHz) TTN5008A Duplexer Mtg Hdwr Add Duplexer Module (158-174 MHz) 0185417U03 Duplexer (158-174 MHz) TTN5008A Duplexer Mtg Hdwr X182AG Add Duplexer Module (800 MHz) TDF6980A Duplexer (800 MHz) TTN5008A Duplexer Hardware (4 screws) X182AH Add Duplexer Module (900 MHz) TDF6542A Duplexer (900 MHz) TTN5008A Duplexer Hardware (4 screws) xxii 68P81095E05-C 8/30/02 Option Category Option and Complement X676AB Add Triple Circulator (144-160 MHz) Same as X676AA except substitute TYD4002A Dual Circulator X676AC Same as X676AA except substitute TYD4003A Dual Circulator Add Triple Circulator (158-174 MHz) X676AQ X676AR Add Triple Circulator (800 MHz) TLF7320A TLN3391A TLF7340A TRN7796A Fan, Peripheral Tray Dual Circulator 50 Ohm Load with Heat Sink Low Pass Filter Add Triple Circulator (900 MHz) TLF7330A TLN3391A TLF7340A TRN7796A Fan, Peripheral Tray Dual Circulator 50 Ohm Load with Heat Sink Low Pass Filter CA00187AA Add Triple Circulator (UHF, R0) TLE9120B Dual Circulator TLN3391A TLE9140A TRN7796A Fan, Peripheral Tray 50 Ohm Load with Heat Sink Low Pass Filter X676AN Add Triple Circulator (UHF, R1 and R2) TLE9120A TLN3391A TLE9140A TRN7796A Fan, Peripheral Tray Dual Circulator 50 Ohm Load with Heat Sink Low Pass Filter Circulator X676AP X676AA X873AA UHSO Add Triple Circulator (UHF, R3 and R4) TLE9130A TLN3391A TLE9140A TRN7796A Fan, Peripheral Tray Dual Circulator 50 Ohm Load with Heat Sink Low Pass Filter Add Triple Circulator (132-146 MHz) TYD4001A Dual Circulator TLN3391A TYD4010A TRN7796A Cooling Fan 50 Ohm Load with Heat Sink Low Pass Filter Add Internal Ultra High Stability Oscillator CLN7012A BNC Terminator CHN6100A AntiVibration/EFI Screws (2) CLN1477A UHSO Module TTN5070CUHSO Board TTN5071AUHSO Housing and Front Panel TTN5072AUHSO 5 PPB Ovenized Element Peripheral X696AA Tray Add Peripheral Tray TRN7751A Quantar Peripheral Shelf HSN1000 TRN7738A External Speaker Hardware (bracket and cable) External Speaker Miscellaneous HMN1001A Microphone Note that the external speaker and microphone are not options and must be ordered as line items on the STIC-1 order form. 8/30/02 68P81095E05-C xxiii FOREWORD Product Maintenance Philosophy Due to the high percentage of surfacemount components and multi-layer circuit boards, the maintenance philosophy for this prod uct is one of Field Replaceable Unit (FRU) substitution. The station is comprised of selfcontained modules (FRUs) which, when determined to be faulty, may be quickly and easily replaced with a known good module to bring the equipment back to normal operation. The faulty module must then be shipped to the Motorola System Support Center for further troubleshooting and repair to the component level. Scope of Manual This manual is intended for use by experienced technicians familiar with similar types of equipment. In keeping with the maintenance phi losophy of Field Replaceable Units (FRU), this manual contains func tional information sufficient to give service personnel an operational understanding of all FRU modules, allowing faulty FRU modules to be identified and replaced with known good FRU replacements. The information in this manual is current as of the printing date. Changes which occur after the printing date are incorporated by In struction Manual Revisions (SMR). These SMRs are added to the man uals as the engineering changes are incorporated into the equipment. xxiv 68P81095E05-C 8/30/02 Service and Replacement Modules Motorola System Support Center 2214 Galvin Drive Elgin, IL 60123 1-800-221-7144 Int'l 1-847-576-7300 FAX 1-847-576-2172 For complete information on ordering FRU replacement modules, or instructions on how to return faulty modules for repair, contact the Sys tem Support Center (see sidebar). The following FRU replacement modules are available:
TLN3250A Receiver Module (VHF Range 1) TLN3251A Receiver Module (VHF Range 2) DLN1215A Receiver Module (UHF, Range 0) TLN3313A Receiver Module (UHF, Range 1) TLN3314A Receiver Module (UHF, Range 2) TLN3373A Receiver Module (UHF, Range 3) TLN3374A Receiver Module (UHF, Range 4) TLN3315A Receiver Module (800 MHz) TLN3316A Receiver Module (900 MHz) TLN3252A Exciter Module (VHF Range 1) TLN3253A Exciter Module (VHF Range 2) DLN1214A Exciter Module (UHF, Range 0) TLN3305A Exciter Module (UHF, Range 1) TLN3306A Exciter Module (UHF, Range 2) TLN3375A Exciter Module (UHF, Range 3) TLN3376A Exciter Module (UHF, Range 4) TLN3307A Exciter Module (800 MHz) TLN3308A Exciter Module (900 MHz) TLN3255A Power Amplifier Module (VHF 25W, R1 & R2) TLN3379A Power Amplifier Module (VHF 125W, R1) TLN3254A Power Amplifier Module (VHF 125W, R2) DLN1216A Power Amplifier Module (UHF R0; 110W) TLN3443A Power Amplifier Module (UHF R1; 25W) TLN3446A Power Amplifier Module (UHF R2; 110W) TLN3450A Power Amplifier Module (UHF R4; 100W) TLN3441A Power Amplifier Module (800 MHz 20W) TLN3442A Power Amplifier Module (800 MHz 100W) TLN3299A Power Amplifier Module (900 MHz 100W) Station Control Module (Conventional/6809) CLN1293A Station Control Module (Conventional/6809 EPIC III) CLN1621A CLN1294A Station Control Module (IntelliRepeater) CLN1295A 4-Wire Wireline Interface Module CLN1296A 8-Wire Wireline Interface Module Power Supply Module (625W AC) TLN3259A TLN3260A Power Supply Module (625W AC w/charger) TLN3261A Power Supply Module (265W AC) TLN3262A Power Supply Module (265W AC w/charger) Power Supply Module (210W 12/24 V DC) TLN3264A TLN3378A Power Supply Module (210W 48/60 V DC) TLN3263A Power Supply Module (600W 24 V DC) TLN3377A Power Supply Module (600W 48/60 V DC) ASTRO Modem Card TLN3265A 8/30/02 68P81095E05-C xxv GENERAL SAFETY INFORMATION The following general safety precautions must be observed during all phases of operation, service, and repair of the equipment described in this manual. The safety precautions listed below represent warnings of certain dangers of which we are aware. You should follow these warnings and all other safety precautions necessary for the safe operation of the equipment in your operating environment. General Safety Precautions
" Read and follow all warning notices and instructions marked on the product or included in this manual be fore installing, servicing or operating the equipment. Retain these safety instructions for future reference. Also, all applicable safety procedures, such as Occupational, Safety, and Health Administration (OSHA) requirements, National Electrical Code (NEC) requirements, local code requirements, safe working practic es, and good judgement must be used by personnel.
" Refer to appropriate section of the product service manual for additional pertinent safety information.
" Because of danger of introducing additional hazards, do not install substitute parts or perform any unautho rized modifications of equipment.
" Identify maintenance actions that require two people to perform the repair. Two people are required when:
- A repair has the risk of injury that would require one person to perform first aid or call for emergency support. An example would be work around high voltage sources. A second person may be required to remove power and call for emergency aid if an accident occurs to the first person. NoteUse the National Institute of Occupational Safety and Health (NIOSH) lifting equation to deter mine whether a one or two person lift is required when a system component must be removed and re placed in its rack.
" If troubleshooting the equipment while power is applied, be aware of the live circuits.
" DO NOT operate the transmitter of any radio unless all RF connectors are secure and all connectors are properly terminated.
" All equipment must be properly grounded in accordance with Motorola Standards and Guideline for Com munications Sites R56" 68P81089E50 and specified installation instructions for safe operation.
" Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect if from overheating, these slots and openings must not be blocked or covered.
" Only a qualified technician familiar with similar electronic equipment should service equipment.
" Some equipment components can become extremely hot during operation. Turn off all power to the equip ment and wait until sufficiently cool before touching. Human Exposure Compliance This equipment is designed to generate and radiate radio frequency (RF) energy by means of an external antenna. When terminated into a non-radiating RF load, the base station equipment is certified to comply with Federal Com munications Commission (FCC) regulations pertaining to human exposure to RF radiation in accordance with the FCC Rules Part 1 section 1.1310 as published in title 47 code of federal regulations and procedures established in TIA/EIA TSB92, Report On EME Evaluation for RF Cabinet Emissions Under FCC MPE Guidelines. Compliance to FCC regulations of the final installation should be assessed and take into account site specific characteristics xxvi 68P81095E05-C 8/30/02 such as type and location of antennas, as well as site accessibility of occupational personnel (controlled environ ment) and the general public (uncontrolled environment). This equipment should only be installed and maintained by trained technicians. Licensees of the FCC using this equipment are responsible for insuring that its installation and operation comply with FCC regulations Part 1 section 1.1310 as published in title 47 code of federal regulations. Whether a given installation meets FCC limits for human exposure to radio frequency radiation may depend not only on this equipment but also on whether the environments" being assessed are being affected by radio frequency fields from other equipment, the effects of which may add to the level of exposure. Accordingly, the overall exposure may be affected by radio frequency generating facilities that exist at the time the licensee's equipment is being installed or even by equipment installed later. Therefore, the effects of any such facilities must be considered in site selection and in determining whether a particular installation meets the FCC requirements. FCC OET Bulletin 65 provides materials to assist in making determinations if a given facility is compliant with the human exposure to RF radiation limits. Determining the compliance of transmitter sites of various complexities may be accomplished by means of computational methods. For more complex sites direct measurement of the power density may be more expedient. Additional information on the topic of electromagnetic exposure is contained in the Motorola Standards and Guideline for Communications Sites publication. Persons responsible for installation of this equipment are urged to consult the listed reference material to assist in determining whether a given installa tion complies with the applicable limits. In general the following guidelines should be observed when working in or around radio transmitter sites:
" All personnel should have electromagnetic energy awareness training
" All personnel entering the site must be authorized
" Obey all posted signs
" Assume all antennas are active
" Before working on antennas, notify owners and disable appropriate transmitters
" Maintain minimum 3 feet clearance from all antennas
" Do not stop in front of antennas
" Use personal RF monitors while working near antennas
" Never operate transmitters without shields during normal operation
" Do not operate base station antennas in equipment rooms For installations outside of the U.S., consult with the applicable governing body and standards for RF energy human exposure requirements and take the necessary steps for compliance with local regulations. References TIA/EIA TSB92 Report On EME Evaluation for RF Cabinet Emissions Under FCC MPE Guidelines," Global Engi neering Documents: http://global.ihs.com/
FCC OET Bulletin 65 Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electro magnetic Fields": http://www.fcc.gov/oet/rfsafety/. Motorola Standards and Guideline for Communications Sites, Motorola manual 68P81089E50. IEEE Recommended Practice for the Measure of Potentially Hazardous Electromagnetic Fields - RF and Micro wave, IEEE Std C95.3-1991, Publication Sales, 445 Hoes Lane, P.O. Box 1331, Piscattaway, NJ 08855-1331 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz, IEEE C95.1-1991, Publication Sales, 445 Hoes Lane, P.O. Box 1331, Piscattaway, NJ 08855-1331. 8/30/02 68P81095E05-C xxvii PERFORMANCE SPECIFICATIONS General TX Sub-Band Range RX Sub-Band Range Number of Channels Channel Spacing Frequency Generation Power Supply Type Power Supply Input Voltage Power Supply Input Frequency Battery Revert VHF 132-154 MHz (R1) 380-433 MHz (R0) 851-870 MHz UHF 800 403-433 MHz (R1) 150-174 MHz (R2) 438-470 MHz (R2) 470-494 MHz (R3) 494-520 MHz (R4) VHF 132-154 MHz (R1) 380-433 MHz (R0) 806-825 MHz UHF 800 900 935-941 MHz 900 896-902 MHz 403-433 MHz (R1) 150-174 MHz (R2) 438-470 MHz (R2) 470-494 MHz (R3) 494-520 MHz (R4) 16 VHF: 30, 25, 12.5 kHz UHF/800: 12.5, 25 kHz 900: 12.5 kHz Synthesized Switching 90-280 V ac 47-63 Hz 12V (25W radios) 24V (100W, 110W, and 125W radios) T/R Separation (without duplexer option) VHF/UHF: Any spacing within same subband 800: 45 MHz 900: 39 MHz T/R Separation (with duplexer option) VHF/UHF: 1.5 MHz 800: 45 MHz 900: 39 MHz Temperature Range (ambient) 30_ C to +60_ C xxviii 68P81095E05-C 8/30/02 PERFORMANCE SPECIFICATIONS (Cont'd) Receiver I-F Frequencies VHF 21.45 MHz (1st) 450 kHz (2nd) UHF 73.35 MHz (1st) 450 kHz (2nd) 800 73.35 MHz (1st) 73.35 MHz (1st) 450 kHz (2nd) 450 kHz (2nd) 900 Preselector Bandwidth VHF/UHF: 4 MHz 800: 19 MHz 900: 6 MHz Sensitivity (12 dB SINAD) VHF: 0.25 mV UHF: 0.35 mV 800/900: 0.30 mV Sensitivity (20 dB Quieting) VHF: 0.35 mV UHF: 0.5 mV 800/900: 0.42 mV Adjacent Channel Rejection Intermodulation Rejection VHF 90 dB (25/30 kHz) 80 dB (23.5 kHz) UHF 75 dB (12.5 kHz) 85 dB (25 kHz) 800 70 dB (12.5 kHz) 70dB 80 db (25 kHz) 900 VHF 85 dB (25/30 kHz) 80 dB (30 kHz) UHF 85 dB 800 85 dB 900 70 dB Spurious and Image Rejection 100 dB Wireline Output
-20 dBm to 0 dBm @ 60% Rated System Deviation, 1 kHz Audio Response (Analog Mode)
+1, -3 dB from 6 dB per octave de-emphasis; 300-3000 Hz referenced to 1000 Hz at line input Audio Distortion Less than 3% @ 1000 Hz FM Hum and Noise (300 to 3000 kHz band width) VHF 50 dB (25/30 kHz) 45 dB (12.5 kHz) UHF 45 dB (12.5 kHz) 50 dB (25 kHz) 800 45 dB (12.5 kHz) 45 db 50 dB (25 kHz) 900 Frequency Stability RF Input Impedance VHF/UHF/800: 1 ppm 900: 0.1 ppm 50 W FCC Designation (FCC Rule Part 15) VHF: ABZ89FR3776 UHF: ABZ89FR4796 800: ABZ89FR5757 900: ABZ89FR5768 8/30/02 68P81095E05-C xxix PERFORMANCE SPECIFICATIONS (Cont'd) Transmitter Power Output VHF 6-25W 25-125W UHF 5-25W 25-110W 800 5-20W 20-100W 900 25-100W Electronic Bandwidth Full sub-band Intermodulation Attenuation VHF:
20 dB (single circulator; standard on all PAs) 65 dB (triple circulator - requires triple circulator option) UHF:
50 dB (single circulator; standard on all PAs) 800:
900:
50 dB (single circulator; standard on all PAs) 20 dB (single circulator; standard on all PAs) 70 dB (triple circulator - requires triple circulator option) SpuriousandHarmonicEmissionsAttenuation 90 dB Deviation VHF, UHF, and 800 5 kHz (25 kHz) 2.5 kHz (12.5 kHz) 900 2.5 kHz Audio Sensitivity
-35 dBm to 0 dBm (variable) Audio Response (Analog Mode)
+1, -3 dB from 6 dB per octave pre-emphasis; 300-3000 Hz referenced to 1000 Hz at line input Audio Distortion Less than 2% @ 1000 Hz @ 60% rated system deviation FM Hum and Noise (300 to 3000 Hz bandwidth) 45 dB nominal (12.5 kHz) 50 dB nominal (25/30 kHz) Frequency Stability RF Output Impedance VHF, UHF, 800: 1 ppm 900: 0.1ppm 50 W FCC Designation VHF 25W: ABZ89FC3774 (FCC Rule Parts 22, 74, 80, 90) 125W: ABZ89FC3773 (Parts 22,74,80,90); ABZ89FC3773-D (Part 90) UHF 25W/R1-2: ABZ89FC4797 (FCC Rule Parts 22, 74, 90) 110W/R0-1: ABZ89FC4798-D (Part 90); ABZ89FC4798-A (Part 90) 110W/R1-3: ABZ89FC4798 (FCC Rule Parts 22, 90) 100W/R4: ABZ89FC4798 (FCC Rule Part 74) 800 20W: ABZ89FC5775 (FCC Rule Parts 22, 90) 100W: ABZ89FC5776 (Parts 22,90); ABZ89FC5776-D (Part 90) FCC Designation 900 100W: ABZ89FC5767 (FCC Rule Part 90) Measurement Methods per TIA/EIA-603 Specifications subject to change without notice xxx 68P81095E05-C 8/30/02
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-06-03 | 132 ~ 174 | TNB - Licensed Non-Broadcast Station Transmitter | Class II permissive change or modification of presently authorized equipment |
2 | 2002-11-05 | 132 ~ 174 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2008-06-03
|
||||
1 2 |
2002-11-05
|
|||||
1 2 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
1 2 | FCC Registration Number (FRN) |
0025009739
|
||||
1 2 | Physical Address |
1303 East Algonquin Road
|
||||
1 2 |
Schaumburg, Illinois 60196
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
m******@elitetest.com
|
||||
1 2 |
d******@elitetest.com
|
|||||
1 2 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
ABZ
|
||||
1 2 | Equipment Product Code |
89FC3773-D
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
R**** S********
|
||||
1 2 | Telephone Number |
847-3********
|
||||
1 2 | Fax Number |
847-5********
|
||||
1 2 |
B******@motorolasolutions.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Motorola, Inc.
|
||||
1 2 |
Motorola Inc
|
|||||
1 2 | Name |
K****** P****** W********
|
||||
1 2 |
K******** W******
|
|||||
1 2 | Physical Address |
1301 E. Algonquin Road
|
||||
1 2 |
1301 East Algonquin Rd
|
|||||
1 2 |
Schaumburg, 60196
|
|||||
1 2 |
Schaumburg, Illinois 60196
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
847-5********
|
||||
1 2 | Fax Number |
847-5********
|
||||
1 2 |
k******@motorola.com
|
|||||
1 2 |
K******@motorola.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
Motorola, Inc.
|
||||
1 2 |
Motorola Inc
|
|||||
1 2 | Name |
A******** S********
|
||||
1 2 |
S****** N******
|
|||||
1 2 | Physical Address |
1301 E. Algonquin Road
|
||||
1 2 |
1301 East Algonquin Rd
|
|||||
1 2 |
Schaumburg, 60196
|
|||||
1 2 |
Schaumburg, Illinois 60196
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
847-5********
|
||||
1 2 |
847 6********
|
|||||
1 2 | Fax Number |
847-5********
|
||||
1 2 |
a******@motorola.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Yes | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Non-Broadcast Transmitter | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of 1.5 meters from all persons during normal operation. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||
1 2 | The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Elite Electronic Engineering Inc.
|
||||
1 2 |
Motorola, Inc.
|
|||||
1 2 | Name |
K******** H****
|
||||
1 2 |
W****** B********
|
|||||
1 2 | Telephone Number |
630-4******** Extension:
|
||||
1 2 |
847-5********
|
|||||
1 2 | Fax Number |
630-4********
|
||||
1 2 |
847-5********
|
|||||
1 2 |
k******@elitetest.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 80,90 | BF CO EF | 132.00000000 | 174.00000000 | 125.0000000 | 2.5000000000 ppm | 8K10F1E | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 90 | BF | 132.00000000 | 174.00000000 | 125.0000000 | 2.5000000000 ppm | 8K10F1E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC