all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Manual - Display Model | Users Manual | 1.36 MiB | ||||
1 2 3 |
|
Manual - Non-Display Model | Users Manual | 1.34 MiB | ||||
1 2 3 |
|
RF Safety Manual | Users Manual | 2.33 MiB | ||||
1 2 3 | Cover Letter(s) | May 01 2018 | ||||||
1 2 3 | Cover Letter(s) | May 01 2018 | ||||||
1 2 3 | Cover Letter(s) | May 01 2018 | ||||||
1 2 3 | RF Exposure Info | May 01 2018 | ||||||
1 2 3 | External Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | Test Report |
1 2 3 | Manual - Display Model | Users Manual | 1.36 MiB |
COMMERCIAL DIGITAL TWO-WAY RADIO MOTOTRBO SL SERIES SL300 DISPLAY PORTABLE RADIOS USER GUIDE Contents Declaration of Conformity.........................4 Important Safety Information..........6 Software Version..............................7 Consignes de scurit importantes...................................8 Version logicielle............................. 9 Computer Software Copyrights....10 Handling Precautions....................11 Getting Started...............................12 How to Use This Guide..................................12 What Your Dealer/System Administrator Can Tell You.............................................12 Preparing Your Radio for Use.......13 Charging the Battery......................................13 Attaching the Battery..................................... 13 Attaching the Antenna................................... 14 Attaching the Earpiece/Audio Accessory.......15 Powering Up the Radio..................................15 Adjusting the Volume.....................................16 Identifying Radio Controls............17 Radio Controls...............................................17 Programmable Buttons..................................17 Assignable Radio Functions............... 18 Assignable Settings or Utility Functions....................................... 18 Accessing the Programmed Action List.........18 Push-To-Talk (PTT) Button............................19 On/Off/Information Button..............................20 C o n t e n t s 1 English Switching Between Conventional Analog and Digital Mode.......................................21 Identifying Status Indicators.........22 LED Indicator.................................................22 Audio Tones...................................................23 Indicator Tones..............................................23 Making and Receiving Calls .........24 Selecting a Zone............................................24 Selecting a Channel.......................................24 Receiving and Responding to a Radio Call... 24 Receiving and Responding to a Group Call......................................24 Receiving and Responding to a Private Call ................................... 25
.......................25 Receiving an All Call Receiving and Responding to a Selective Call
.............................26 Making a Radio Call.......................................26 Making a Group Call........................... 27
......................27 Making a Private Call Making an All Call
...........................28 Making a Selective Call ......................29 s t n e t n o C 2 English Talkaround.....................................................29 Monitoring Features.......................................30 Monitoring a Channel..........................30 Permanent Monitor............................. 30 Advanced Features........................31 Scan Lists...................................................... 31 Scan...............................................................31 Starting and Stopping Scan................ 31 Responding to a Transmission During a Scan................................ 32 Deleting a Nuisance Channel............. 32 Restoring a Nuisance Channel........... 32 Vote Scan
..................................................33 Call Indicator Settings....................................33 Escalating Alarm Tone Volume...........33 Call Alert Operation....................................... 33 Receiving and Responding to a Call Alert........................................ 33 Making a Call Alert with the One Touch Access Button.....................34 Emergency Operation....................................34 Sending an Emergency Alarm............ 35 Sending an Emergency Alarm with Call.................................................35 Sending an Emergency Alarm with Voice to Follow ............................. 36 Reinitiating an Emergency Mode........37 Exiting Emergency Mode After Sending the Emergency Alarm...... 37 Privacy
.......................................................38 Lone Worker.................................................. 38 Password Lock Features............................... 39 Accessing the Radio from Password....................................... 39 Auto-Range Transponder System (ARTS)
.............................................................. 39 Utilities........................................................... 40 Setting the Squelch Level................... 40 Setting the Power Level......................40 Turning the Voice Operating Transmission (VOX) Feature On or Off........................................ 40 Turning the Radio Tones/Alerts On or Off..............................................41 Adjusting the Display Brightness........ 41 Voice Announcement..........................41 C o n t e n t s Batteries.........................................................42 Carry Devices................................................ 42 Chargers........................................................42 Earbuds and Earpieces................................. 42 Batteries and Chargers Warranty...........43 The Workmanship Warranty..........................43 The Capacity Warranty..................................43 Limited Warranty......................................44 MOTOROLA COMMUNICATION PRODUCTS............................................. 44 I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:........................... 44 II. GENERAL PROVISIONS:......................... 45 III. STATE LAW RIGHTS:..............................45 IV. HOW TO GET WARRANTY SERVICE:...45 V. WHAT THIS WARRANTY DOES NOT COVER:....................................................46 VI. PATENT AND SOFTWARE PROVISIONS:.......................................... 46 VII. GOVERNING LAW:.................................48 Authorized Accessories List.........42 Antennas........................................................42 3 English Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. Declaration of Conformity Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product:
Model Name: SL300 conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) y t i f m r o n o C f o n o i t a r a c e D l 4 English Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver. D e c a r a l t i o n o f C o n f o r m i t y 5 English isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with Motorola-approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Important Safety Information ATTENTION!
This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. For a list of Motorola-approved antennas and other accessories, visit the following website:
http://www.motorolasolutions.com Any modification to this device, not expressly authorized by Motorola, may void the users authority to operate this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent English n o i t a m r o n f I y t e f a S t n a t r o p m I 6 Software Version All the features described in the following sections are supported by the radio's software version R01.00.25 or later. Check with your dealer or system administrator for more details of all the features supported. S o f t w a r e V e r s o n i 7 English metteur. Afin de limiter les interfrences radio pour les autres utilisateurs, le type et le gain de l'antenne doivent tre choisis de faon ce que la puissance isotrope rayonne quivalente (P.I.R.E.) ne soit pas plus forte qu'il ne le faut pour tablir la communication. Cet metteur radio a t approuv par Industrie Canada pour utilisation avec une antenne approuve par Motorola offrant le gain maximal autoris et l'impdance requise pour le type d'antenne indiqu. Il est strictement interdit d'utiliser avec cet appareil tout type d'antenne ne figurant pas dans cette liste et prsentant un gain suprieur au maximum indiqu pour le type. Consignes de scurit importantes ATTENTION!
Cette radio ne doit tre utilise qu' des fins professionnelles. Avant d'utiliser la radio, lisez le guide Radios bidirectionnelles : exposition aux radiofrquences et scurit du produit, qui contient d'importantes instructions de fonctionnement pour une utilisation scuritaire et des informations sur l'exposition aux frquences radiolectriques, dans le but dassurer votre conformit aux normes et rglements en vigueur. Visitez le site Web suivant pour obtenir la liste des antennes et des autres accessoires approuvs par Motorola :
http://www.motorolasolutions.com Toute modification effectue cet appareil sans l'autorisation explicite de Motorola peut annuler l'autorisation d'utiliser cet appareil. Selon la rglementation d'Industrie Canada, cet metteur radio ne peut tre utilis qu'avec une antenne dont le type et le gain maximal (ou minimal) sont approuvs par Industrie Canada pour cet s e t n a t r o p m i t i r u c s e d s e n g s n o C i 8 English Version logicielle Toutes les fonctions dcrites dans les sections suivantes sont prises en charge par la version R01.00.25 ou les versions ultrieures du logiciel de la radio. Pour obtenir davantage de renseignements propos des fonctions prises en charge, adressez-vous votre dtaillant ou votre administrateur de systme. V e r s o n i l i o g c e i l l e 9 English including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,
#5,701,390, #5,715,365, #5,649,050, #5,630,011,
#5,581,656, #5,517,511, #5,491,772, #5,247,579,
#5,226,084 and #5,195,166. Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-
exclusive license to use that arises by operation of law in the sale of a product. The AMBE+2 voice coding Technology embodied in this product is protected by intellectual property rights s t h g i r y p o C e r a w t f o S r e t u p m o C 10 English Handling Precautions The MOTOTRBO Series Digital Portable radio meets IP54 specifications, allowing the radio to withstand adverse field conditions such as being exposed to water or dust. Keep your radio clean and exposure to water should be avoided to help ensure proper functionality and performance. To clean the exterior surfaces of the radio, use a diluted solution of mild dishwashing detergent and fresh water (i.e. one teaspoon of detergent to one gallon of water). These surfaces should be cleaned whenever a periodic visual inspection reveals the presence of smudges, grease, and/or grime. Caution: The effects of certain chemicals and their vapors can have harmful results on certain plastics. Avoid using aerosol sprays, tuner cleaners and other chemicals. H a n d l i n g P r e c a u t i o n s 11 English What Your Dealer/System Administrator Can Tell You You can consult your dealer or system administrator about the following:
Is your radio programmed with any preset conventional channels?
Which buttons have been programmed to access other features?
What optional accessories may suit your needs?
What are the best radio usage practices for effective communication?
What maintenance procedures will help promote longer radio life?
Getting Started How to Use This Guide This User Guide covers the basic operation of the MOTOTRBO Portables. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information. Throughout this publication, the icons described next are used to indicate features supported in either the conventional Analog mode or conventional Digital mode:
Indicates a conventional Analog Mode-
Only feature. Indicates a conventional Digital Mode-
Only feature. For features that are available in both conventional Analog and Digital modes, no icon is shown. d e t r a t S g n i t t e G 12 English Preparing Your Radio for Use Attaching the Battery Charging the Battery 1 Align the battery contacts with the contacts inside the battery compartment. Insert the contact side of the battery first. Gently push the battery into place. P r e p a r i n g Y o u r R a d o i f Your radio is powered by a Lithium-Ion (Li-lon) battery. To avoid damage and to ensure compliance with warranty terms, charge the battery using a Motorola charger exactly as described in the charger user guide. All chargers can charge only Motorola authorized batteries. Other batteries may not charge. It is recommended your radio remains powered off while charging. Note: You can charge the battery with the radio using a USB cable connected to a computer. Charge a new battery 14 to 16 hours before initial use for best performance. Prior to charging a battery with the radio, it is recommended to turn the radio off. Batteries charge best at room temperature. The battery charging icon will be displayed and the LED lights up solid red until the user unplugs the USB cable. o r U s e 2 To attach battery cover, align it in place and slide the battery latch until it snaps into place. Slide battery latch into lock position. 13 English 12 Attaching the Antenna Caution: If antenna needs to be replaced, ensure that only MOTOTRBO antennas are used. Neglecting this will damage your radio. See Antennas on page 42 for a list of available antennas. 1 With the radio turned off, set the antenna in its receptacle and turn clockwise. e s U r o f i o d a R r u o Y g n i r a p e r P 14 English 123 2 To remove the antenna, turn the antenna counterclockwise. Attaching the Earpiece/Audio Accessory The audio jack (
the radio. It is used to connect accessories to the radio.
) is located on the antenna side of Lift up the flap of the Audio Jack cover. Align the indicators (
) on both the connector and housing, then push until it fits in properly. Powering Up the Radio Short press the On/Off/Information Button (
see a power on animation. The LED lights up solid green.
). You P r e p a r i n g Y o u r R a d o i f o r U s e 15 English AA Adjusting the Volume
) up. To increase the volume, push the (+) Volume Button
(
To decrease the volume, push the () Volume Button down. Note: Your radio can be programmed to have a minimum volume offset where the volume level cannot be lowered past the programmed minimum volume. Check with your dealer or system administrator for more information. e s U r o f i o d a R r u o Y g n i r a p e r P 16 English A Identifying Radio Controls Radio Controls 1 Channel Rocker 2 On/Off/Information Button 3 LED Indicator 1 These buttons are programmable. I d e n i t i f y n g R a d o C o n t r o s i l 4 Push-to-Talk (PTT) Button 5 Volume Button 6 Side Button 1[1]
7 Display 8 Microphone 9 USB Connector 10 Accessory Connector 11 Speaker 12 Antenna Programmable Buttons Your dealer can program the programmable buttons as shortcuts to radio functions depending on the duration of a button press:
Short press Pressing and releasing rapidly. Long press Pressing and holding for the programmed duration. Hold down Keeping the button pressed. Note: The programmed duration of a button press is applicable for all assignable radio/utility functions or settings. See Emergency Operation on page 34 for 17 English 615 4 10121192387 more information on the programmed duration of the Emergency button. Assignable Radio Functions Actions A programmable button to access a CPS programmable action list. Emergency On/Off Depending on the programming, initiates or cancels an emergency. Mic AGC On/Off Toggles the internal microphone automatic gain control (AGC) on or off. Monitor Monitors a selected channel for activity. Nuisance Channel Delete Temporarily removes an unwanted channel, except for the Selected Channel, from the scan list. The Selected Channel refers to the users selected zone/channel combination from which scan is initiated. One Touch Access Directly initiates a predefined channel, a Private or Group Call, or a Call Alert. Permanent Monitor Monitors a selected channel for all radio traffic until function is disabled. Privacy Toggles privacy on or off. l i s o r t n o C o d a R g n y f i t n e d I i 18 English Repeater/Talkaround Toggles between using a repeater and communicating directly with another radio. Scan Toggles scan on or off. Voice Announcement On/Off Toggles voice announcement on or off. Voice Operating Transmission (VOX) Toggles VOX on or off. Zone Toggle Allows radio user to toggle between Zone 1 and Zone 2. Assignable Settings or Utility Functions All Tones/Alerts Toggles all tones and alerts on or off. Power Level Toggles transmit power level between high and low. Squelch and normal. Toggles squelch level between tight Accessing the Programmed Action List You can access the CPS programmable action list by using the programmed Actions button. 1 Press the programmed Actions button. The display shows the first item in the action list, a tone sounds, and the radio plays the item announcement voice message. 2 Press the programmed Actions button again to navigate to the next item in the action list. The display shows the next item in the action list, a tone sounds, and the radio plays the item announcement voice message. 3 Press the Volume Button up or down to toggle on or off, or change the status of the item. The display shows the item status, a tone sounds, and the radio plays the item announcement voice message. Push-To-Talk (PTT) Button The PTT button on the side of the radio (
two basic purposes:
) serves I d e n i t i f y n g R a d o C o n t r o s i l While a call is in progress, the PTT button allows the radio to transmit to other radios in the call. Press and hold down PTT button to talk. Release the PTT button to listen. The microphone is activated when the PTT button is pressed. While a call is not in progress, the PTT button is used to make a new call (see Making a Radio Call on page 26). 19 English A If the Talk Permit Tone or the PTT Sidetone is enabled, wait until the short alert tone ends before talking. During a call, if the Channel Free Indication feature is enabled on your radio (programmed by your dealer), you will hear a short alert tone the moment the target radio (the radio that is receiving your call) releases the PTT button, indicating the channel is free for you to respond. You will also hear a continuous talk prohibit tone, if your call is interrupted, indicating that you should release the PTT button, for example when the radio receives an Emergency Call. On/Off/Information Button The On/Off/Information button at the top of the radio
(
) serves three basic purposes:
l i s o r t n o C o d a R g n y f i t n e d I i 20 English The On/Off/Information button is used to power the radio on or off. See Powering Up the Radio on page 15 for details on powering up the radio. When the radio is powered on, the On/Off/
Information button is used to display the Received Signal Strength Indicator (RSSI) icon and signal strength, and battery strength of the radio battery. Short press the On/Off/Information button when the radio is powered on. A When the radio is powered on, the On/Off/
Information button is used to display the radio name. Short press the On/Off/Information button twice when the radio is powered on. Switching Between Conventional Analog and Digital Mode Each channel in your radio can be configured as a conventional analog or conventional digital channel. Use the Channel Rocker (
) to switch between an analog or a digital channel. I d e n i t i f y n g R a d o C o n t r o s i l When switching from digital to analog mode, certain features are unavailable. Your radio also has features available in both analog and digital mode. However, the minor differences in the way each feature works does not affect the performance of your radio. Note: Your radio also switches between digital and analog modes during a dual mode scan (see Scan on page 31). 21 English A Identifying Status Indicators LED Indicator The LED indicator (
your radio.
) shows the operational status of s r o t i a c d n t t I s u a S g n y f i t n e d I i 22 English Solid red Blinking red Radio is charging. Radio is transmitting at low battery condition, receiving an emergency transmission, has failed the self-test upon powering up, has charging errors, or has moved out of range if radio is configured with Auto-Range Transponder System. Also indicates low battery charge when the On/Off/Information button is pressed. Radio is monitoring a conventional channel. Also indicates fair battery charge when the On/Off/
Information button is pressed. Radio is scanning for activity or receiving a Call Alert, or the flexible receive list is enabled. Radio is powering up, sending a Call Alert or an emergency transmission, Solid yellow Blinking yellow Solid green A or transmitting. Also indicates full charge of the battery when the programmable On/Off/
Information button is pressed. Radio is receiving a call or data, or detecting activity over the air. Repetitive Tone Momentary Tone A single tone that repeats itself until it is terminated by the user. Sounds only once for a short period of time defined by the radio. Indicator Tones High pitched tone Low pitched tone Blinking green Audio Tones I d e n i t i f y n g S a t t u s I n d c a i t o r s Audio tones provide you with audible indications of the status, or response to data received on the radio. Continuous Tone Periodic Tone A monotone sound. Sounds continuously until termination. Sounds periodically depending on the duration set by the radio. Tone starts, stops, and repeats itself. Positive Indicator Tone Negative Indicator Tone 23 English Making and Receiving Calls Selecting a Zone A zone is a group of channels. Your radio supports up to 99 channels and 2 zones. Press the programmed Zone Toggle button to select Zone 1 or Zone 2. Selecting a Channel Transmissions are sent and received on a channel. Depending on your radios configuration, each channel may have been programmed differently to support different groups of users or supplied with different features. When the display is off and you push the Channel Rocker, the display shows the current channel and plays the channel announcement voice message. When the display is on and you push the Channel Rocker to the target channel, the display shows the target channel and plays the channel announcement voice message. s l l i i a C g n v e c e R d n a g n k a M i 24 English Push the Channel Rocker to select the channel. Receiving and Responding to a Radio Call Once the channel, subscriber ID, or group ID is set, you can proceed to receive and respond to calls. The LED lights up solid green while the radio is transmitting and blinks green when the radio is receiving. Receiving and Responding to a Group Call To receive a call from a group of users, your radio must be configured as part of that group. LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. The LED lights up solid green. 2 Wait for one of the following tones to finish (if enabled), and speak clearly into the microphone. The Talk Permit Tone. The PTT Sidetone. 3 Release the PTT button to listen. If there is no voice activity for a predetermined period of time, the call ends. Note: See Making a Group Call on page 27 for details on making a Group Call. Receiving and Responding to a Private Call A Private Call is a call from an individual radio to another individual radio. When you receive a Private Call, the LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. The LED lights up solid green. 2 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 3 Release the PTT button to listen. M a k n g i a n d R e c e v n g C a i i If there is no voice activity for a predetermined period of time, the call ends. l l s See Making a Private Call on page 27 for details on making a Private Call. Receiving an All Call An All Call is a call from an individual radio to every radio on the channel. It is used to make important announcements requiring the users full attention. When you receive an All Call, a tone sounds and the LED blinks green. Your radio unmutes and the incoming call sounds through the radio speaker. 25 English An All Call does not wait for a predetermined period of time before ending. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is now available for use. You cannot respond to an All Call. Note: The radio stops receiving the All Call if you switch to a different channel while receiving the call. During an All Call, you will not be able to use any programmed button functions until the call ends. Receiving and Responding to a Selective Call A Selective Call is a call from an individual radio to another individual radio. It is a Private Call on an analog system. When you receive a Selective Call, the LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 2 Press the PTT button to respond to the call. The LED lights up solid green. 3 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 4 Release the PTT button to listen. If there is no voice activity for a predetermined period of time, the call ends. See Making a Private Call on page 27 for details on making a Private Call. Making a Radio Call You can select a channel by using:
Channel Rocker A programmed One Touch Access button Note: Your radio must have the Privacy feature enabled on the channel to send a privacy-enabled transmission. Only target radios with the same Privacy Key as your radio will be able to unscramble the transmission. Note: See Privacy on page 38 for more information. s l l i i a C g n v e c e R d n a g n k a M i 26 English Making a Group Call To make a call to a group of users, your radio must be configured as part of that group. 1 Do one of the following. Select the channel with the active group alias or ID. See Selecting a Channel on page 24. Press the programmed One Touch Access button. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. The display shows the group call alias. 4 Wait for one of the following tones to finish (if enabled), and speak clearly into the microphone. The Talk Permit Tone. The PTT Sidetone. 5 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 6 Release the PTT button to listen. When the target radio responds, the LED blinks green. You see the transmitting radio alias or ID on your display. M a k n g i 7 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. Radio returns to the screen you were on prior to initiating the call. Making a Private Call While you can receive and/or respond to a Private Call initiated by an authorized individual radio, your radio must be programmed for you to initiate a Private Call. There are two types of Private Calls. The first type, where a radio presence check is performed prior to setting up the call, while the other sets up the call immediately. Only one of these call types can be programmed to your radio by your dealer. a n d R e c e v n g C a i i l l s 27 English You will hear a negative indicator tone, when you make a Private Call via the One Touch Access button, if this feature is not enabled. Use the Call Alert features to contact an individual radio. See Call Alert Operation on page 33 for more information. 1 Do one of the following. Select the channel with the active subscriber alias or ID. See Selecting a Channel on page 24. Press the programmed One Touch Access button. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. The display shows the subscriber alias. 4 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 5 Release the PTT button to listen. s l l i i a C g n v e c e R d n a g n k a M i 28 English When the target radio responds, the LED blinks green. 6 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. You hear a short tone. Making an All Call This feature allows you to transmit to all users on the channel. Your radio must be programmed to allow you to use this feature. Users on the channel cannot respond to an All Call. 1 Select the channel with the active All Call group alias or ID. See Selecting a Channel on page 24. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. Making a Selective Call Just like a Private Call, while you can receive and/or respond to a Selective Call initiated by an authorized individual radio, your radio must be programmed for you to initiate a Selective Call. the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. 1 Select the channel with the active subscriber alias or ID. See Selecting a Channel on page 24. Talkaround 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. 4 Wait for one of the following tones to finish (if enabled), and speak clearly into the microphone. The Talk Permit Tone. The PTT Sidetone. 5 Release the PTT button to listen. When the target radio responds, the LED blinks green. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment You can continue to communicate when your repeater is not operating, or when your radio is out of the repeaters range but within talking range of other radios. This is called talkaround. The Talkaround setting is retained even after powering down. Press the programmed Repeater/Talkaround button. You hear ... Positive Indicator Tone Negative Indicator Tone Indicating ... Radio is in Talkaround mode. Radio is in Repeater mode. M a k n g i a n d R e c e v n g C a i i l l s 29 English 1 Press the programmed Permanent Monitor button to activate permanent monitoring of the channel. Radio sounds an alert tone, the LED lights up solid yellow. 2 Press the programmed Permanent Monitor button to exit Permanent Monitor mode. Radio sounds an alert tone, the LED turns off. Monitoring Features Monitoring a Channel Use the Monitor feature to make sure a channel is clear before transmitting. 1 Press and hold the programmed Monitor button and listen for activity. The LED lights up solid yellow. You hear radio activity or total silence, depending on how your radio is programmed. This indicates that the channel is in use. 2 Wait until you hear white noise. This indicates that the channel is free. 3 Press the PTT button to talk and release it to listen. Permanent Monitor Use the Permanent Monitor feature to continuously monitor a selected channel for activity. s l l i i a C g n v e c e R d n a g n k a M i 30 English Advanced Features Scan Lists Scan lists are created and assigned to individual channels/groups. Your radio scans for voice activity by cycling through the channel/group sequence specified in the scan list for the current channel/
group. Your radio can support up to 3 scan lists, with a maximum of 16 members in a list. Each scan list supports a mixture of both analog and digital entries. You can add, delete, or prioritize channels by editing a scan list. Scan When you start a scan, your radio cycles through the programmed scan list for the current channel looking for voice activity. The LED blinks yellow and you see the Scan icon on the display. During a dual mode scan, if you are on a digital channel, and your radio locks onto an analog channel, it automatically switches from digital mode to analog mode for the duration of the call. This is also true for the reverse. There are two ways of initiating scan:
Main Channel Scan (Manual): Your radio scans all the channels/groups in your scan list. On entering scan, your radio may depending on the settings automatically start on the last scanned active channel/group or on the channel where scan was initiated. Auto Scan (Automatic): Your radio automatically starts scanning when you select a channel/group that has Auto Scan enabled. Starting and Stopping Scan Do one of the following. Press the programmed Scan button. Use the Channel Rocker to select a channel programmed with Auto Scan enabled. The LED blinks yellow and you hear a positive indicator tone, when Scan is enabled. The LED turns off and you hear a negative indicator tone, when Scan is disabled. A d v a n c e d F e a t u r e s 31 English Responding to a Transmission During a Scan Deleting a Nuisance Channel During scanning, your radio stops on a channel/group where activity is detected. The radio stays on that channel for a programmed time period known as hang time. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. 2 Press the PTT button during hang time. The LED lights up solid green. 3 Wait for one of the following tones to finish (if enabled), and speak clearly into the microphone. The Talk Permit Tone. The PTT Sidetone. 4 Release the PTT button to listen. If you do not respond within the hang time, the radio returns to scanning other channels/groups. If a channel continually generates unwanted calls or noise (termed a nuisance channel), you can temporarily remove the unwanted channel from the scan list. This capability does not apply to the channel designated as the Selected Channel. Deleting a nuisance channel is only possible through the programmed Nuisance Channel Delete button. This feature is not accessible through the menu. 1 When your radio locks on to an unwanted or nuisance channel, press the programmed Nuisance Channel Delete button until you hear a tone. 2 Release the Nuisance Channel Delete button. The nuisance channel is deleted. Restoring a Nuisance Channel To restore the deleted nuisance channel, do one of the following:
Turn the radio off and then power it on again. t s e r u a e F d e c n a v d A 32 English Stop and restart a scan via the programmed Scan button. Change the channel via the Channel Rocker. Vote Scan Vote Scan provides you with wide area coverage in areas where there are multiple base stations transmitting identical information on different analog channels. Your radio scans analog channels of multiple base stations and performs a voting process to select the strongest received signal. Once that is established, your radio unmutes to transmissions from that base station. The LED blinks yellow during the Vote Scan operation. To respond to a transmission during a Vote Scan, follow the same procedures as Responding to a Transmission During a Scan on page 32. Call Indicator Settings You can turn on or off the ringing tones for a received Private Call (see Turning the Radio Tones/Alerts On or Off on page 41). Escalating Alarm Tone Volume You can program your radio to continually alert you when a radio call remains unanswered. This is done by automatically increasing the alarm tone volume over time. This feature is known as Escalert. A d v a n c e d F e a t u r e s Call Alert Operation Call Alert paging enables you to alert a specific radio user to call you back when they are able to do so. This feature is accessible via a programmed One Touch Access button. Receiving and Responding to a Call Alert When you receive a Call Alert page, you see ALERT with the alias or ID of the calling radio on the display, hear a repetitive tone and the LED blinks yellow. 33 English Press the PTT button within four (4) seconds of receiving a Call Alert page to respond to the Private Call. Making a Call Alert with the One Touch Access Button Press the programmed One Touch Access button to make a Call Alert to the predefined alias or ID. The display shows ALERT. The LED lights up solid green when your radio is sending the Call Alert. If the Call Alert acknowledgement is received, a tone sounds and the display shows positive mini notice. If the Call Alert acknowledgement is not received, a tone sounds and the display shows negative mini notice. Emergency Operation An Emergency Alarm is used to indicate a critical situation. You are able to initiate an Emergency at any time even when there is activity on the current channel. t s e r u a e F d e c n a v d A 34 English Your dealer can set the duration of a button press for the programmed Emergency button, except for long press, which is similar with all other buttons:
Short press Between 0.05 seconds and 0.75 seconds Long press Between 1.00 second and 3.75 seconds The Emergency button is assigned with the Emergency On/Off feature. Check with your dealer for the assigned operation of the Emergency button. Note: If the short press for the Emergency button is assigned to turn on the Emergency mode, then the long press for the Emergency button is assigned to exit the Emergency mode. If the long press for the Emergency button is assigned to turn on the Emergency mode, then the short press for the Emergency button is assigned to exit the Emergency mode. Your radio supports three Emergency Alarms:
Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow Note: Only ONE of the Emergency Alarms above can be assigned to the programmed Emergency button. In addition, each alarm has the following types:
Regular Radio transmits an alarm signal and shows audio and/or visual indicators. Silent Radio transmits an alarm signal without any audio or visual indicators. Radio receives calls without any sound through the radios speaker, until you press the PTT button to initiate the call. Silent with Voice Radio transmits an alarm signal without any audio or visual indicators, but allow incoming calls to sound through the radios speaker. Sending an Emergency Alarm This feature allows you to send an Emergency Alarm, a non-voice signal, which triggers an alert indication on a group of radios. If your radio is set to Silent, it does not display any audio or visual indicators during Emergency mode. Press the programmed Emergency On button. The display shows ALRM. When an Emergency Alarm acknowledgement is received, the Emergency tone sounds and the LED blinks green. If your radio does not receive an Emergency Alarm acknowledgement, and after all retries have been exhausted, a tone sounds. Radio exits the Emergency Alarm mode. A d v a n c e d F e a t u r e s Sending an Emergency Alarm with Call This feature allows you to send an Emergency Alarm to a group of radios. Upon acknowledgement by a radio within the group, the group of radios can communicate over a programmed Emergency channel. If your radio is set to Silent, it does not display any audio or visual indicators during Emergency mode, or allow any received calls to sound through the radios speaker, until you press the PTT button to initiate the call. If your radio is set to Silent with Voice, it does not display any audio or visual indicators during Emergency mode, but allow incoming calls to sound through the radios speaker. The indicators only 35 English appear once you press the PTT button to initiate, or respond to, the call. 1 Press the programmed Emergency On button. The LED lights up solid green. When an Emergency Alarm acknowledgement is received, the Emergency tone sounds and the LED blinks green. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press PTT button to make the call. The LED lights up solid green. 4 Release the PTT button to listen. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. 5 Press the PTT button to respond. 6 Once your call ends, press Emergency Off button to exit the Emergency mode. Sending an Emergency Alarm with Voice to Follow This feature allows you to send an Emergency Alarm to a group of radios. Your radios microphone is automatically activated, allowing you to communicate with the group of radios without pressing the PTT button. This activated microphone state is also known as hot mic. Note: Some accessories may not support hot mic. Check with your dealer or system administrator for more information. If you press the PTT button during the programmed hot mic transmission period, you hear a prohibit tone, indicating that you should release the PTT button. The radio ignores the PTT press and remains in Emergency mode. Note: If you press the PTT button during hot mic, and continue to press it after the hot mic duration expires, the radio continues to transmit until you release the PTT button. If your radio is set to Silent, it does not display any audio or visual indicators during Emergency mode, or allow any received calls to sound through the radios t s e r u a e F d e c n a v d A 36 English speaker, until the programmed hot mic transmission period is over, and you press the PTT button. If your radio is set to Silent with Voice, it does not display any audio or visual indicators during Emergency mode when you are making the call with hot mic, but allow sound through the radios speaker when the target radio responds after the programmed hot mic transmission period is over. The indicators only appear when you press the PTT button. Note: If the Emergency Alarm request fails, the radio does not retry to send the request, and enters the hot mic state directly. 1 Press the programmed Emergency On button. The display shows ALRM and the destination alias. ALRM will be displayed till acknowledgement is received.The LED lights up solid green. 2 Once a tone sounds, speak clearly into the microphone. When hot mic has been enabled, the radio automatically transmits without a PTT button press until the hot mic duration expires. While transmitting, the LED lights up solid green. A d v a n c e d F e a t u r e s 3 Once the hot mic duration expires, the radio automatically stops transmitting. To transmit again, press the PTT button. Reinitiating an Emergency Mode Note: This feature is only applicable to the radio sending the Emergency Alarm. There are two instances where this can happen:
You change the channel while the radio is in Emergency mode. This exits the Emergency mode. If Emergency Alarm is enabled on this new channel, the radio reinitiates Emergency. You press the programmed Emergency On button during an Emergency initiation/transmission state. This causes the radio to exit this state, and to reinitiate Emergency. Exiting Emergency Mode After Sending the Emergency Alarm Note: This feature is only applicable to the radio sending the Emergency Alarm. Your radio exits Emergency mode when one of the following occurs:
37 English Emergency Alarm acknowledgement is received
(for Emergency Alarm only). All retries to send the alarm have been exhausted. The Emergency Off button is pressed. Note: If your radio is powered off, it exits the Emergency mode. The radio will not reinitiate the Emergency mode automatically when it is turned on again. Privacy If enabled, this feature helps to prevent eavesdropping by unauthorized users on a channel by the use of a software-based scrambling solution. The signaling and user identification portions of a transmission are not scrambled. Your radio must have privacy enabled on the channel to send a privacy-enabled transmission, although this is not a necessary requirement for receiving a transmission. While on a privacy-enabled channel, the radio is still able to receive clear (unscrambled) transmissions. Your radio only supports Basic Privacy. To unscramble a privacy-enabled call or data transmission, your radio must be programmed to t s e r u a e F d e c n a v d A 38 English have the same Privacy Key (for Basic Privacy) as the transmitting radio. If your radio receives a scrambled call that is of a different Privacy Key, or a different Key Value and Key ID, you will hear a garbled transmission (Basic Privacy). The LED lights up solid green while the radio is transmitting and blinks green rapidly when the radio is receiving an ongoing privacy-enabled transmission. Note: Some radio models may not offer this Privacy feature. Check with your dealer or system administrator for more information. Lone Worker This feature raises an emergency if there is no user activity, such as any radio button press or activation of the channel selector, for a predefined time. Before raising the emergency, when the inactivity timer expires, the radio warns the user via an audio indicator. If there is still no acknowledgement by the user before the predefined reminder timer expires, the radio initiates an Emergency Alarm. Only one of the following Emergency Alarms can be assigned to this feature:
Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow The radio remains in the emergency state allowing voice messages to proceed until action is taken. See Emergency Operation on page 34 on ways to exit Emergency. Note: This feature is limited to radios with this function enabled. Check with your dealer or system administrator for more information. Password Lock Features If enabled, this feature only allows you access your radio if the correct password is entered upon powering up. Accessing the Radio from Password 1 Power up your radio. You hear a continuous tone. 2 Push the Channel Rocker to enter the first digit of the password. A d v a n c e d F e a t u r e s 3 Press Side Button 1 to enter each digit of the remaining three digits of the password. When the second digit of the password is entered, your radio ignores any push of the Channel Rocker. When the last digit of the four-digit password is entered, your radio automatically checks the validity of the password. You hear a positive indicator tone for every digit entered. If the password is correct, your radio proceeds to power up. See Powering Up the Radio on page 15. If the password is incorrect, you hear a continuous tone. Repeat steps 1 to 3. Auto-Range Transponder System (ARTS) ARTS is an analog-only feature designed to inform you when your radio is out-of-range of other ARTS-
equipped radios. ARTS-equipped radios transmit or receive signals periodically to confirm that they are within range of each other. Your dealer can program your radio to transmit or receive the ARTS signal. 39 English Your radio provides indications of states as follows:
First-Time Alert A tone sounds. ARTS-in-Range Alert A tone sounds, if programmed. ARTS-Out-of-Range Alert A tone sounds, the LED rapidly blinks red. Utilities Setting the Squelch Level You can adjust your radio's squelch level to filter out unwanted calls with low signal strength or channels that have a higher than normal background noise. Normal Squelch is the default. Tight Squelch filters out (unwanted) calls and/or background noise;
however, calls from remote locations may also be filtered out. Press the programmed Squelch button. Tone heard ... Positive Indicator tone Negative Indicator tone Normal Squelch Radio operating in ... Tight Squelch t s e r u a e F d e c n a v d A 40 English Setting the Power Level You can customize your radios power setting to high or low for each channel. PWR H enables communication with radios located at a considerable distance from you. PWR L enables communication with radios in closer proximity. Press the programmed Power Level button. Tone heard ... Radio transmitting at ... Positive Indicator tone Low Power Negative Indicator tone High Power Turning the Voice Operating Transmission (VOX) Feature On or Off This feature allows you to initiate a hands-free voice activated call on a programmed channel. The radio automatically transmits, for a programmed period, whenever the microphone on the VOX-capable accessory detects voice. Pressing the PTT button during radio operation will disable VOX. To re-enable VOX, do one of the following:
Turn the radio off and power it on again. Change the channel via the Channel Rocker. Press the programmed VOX button to toggle the feature on or off. Note: Turning this feature on or off is limited to radios with this function enabled. Check with your dealer or system administrator for more information. Turning the Radio Tones/Alerts On or Off You can enable and disable all radio tones and alerts
(except for the incoming Emergency alert tone) if needed. Press the programmed All Tones/Alerts button. Tone heard ... Positive Indicator tone Indication All tones and alerts are ON. Negative Indicator tone All tones and alerts are OFF. Adjusting the Display Brightness You can adjust radios display brightness as needed. A d v a n c e d F e a t u r e s Press the programmed Actions button and navigate to the item where you can adjust the brightness level. See Accessing the Programmed Action List on page 18 for more information. Voice Announcement This feature enables the radio to audibly indicate the current Zone or Channel the user has just assigned, or programmable button press. This audio indicator can be customized per customer requirements. Press the programmed Voice Announcement button. Tone heard ... Positive Indicator tone Indication All tones and alerts are ON. Negative Indicator tone All tones and alerts are OFF. 41 English Authorized Accessories List Antennas UHF, 403 425 MHz, 4.5 cm, Stubby Antenna
(PMAE4093_) UHF, 420 445 MHz, 4.5 cm, Stubby Antenna
(PMAE4094_) UHF, 435 470 MHz, 4.5 cm, Stubby Antenna
(PMAE4095_) VHF, 136 144 MHz, 5.0 cm, Stubby Antenna
(PMAD4144_) VHF, 144 156 MHz, 5.0 cm, Stubby Antenna
(PMAD4145_) VHF, 156 174 MHz, 5.0 cm, Stubby Antenna
(PMAD4146_) Batteries Lithium-Ion 2200 mAh Battery (PMNN4468_) Battery Door (PMLN7074_) Carry Devices Nylon Wrist Strap (PMLN6074_) Flexible Quick Release Hand Strap (PMLN7076_) t s L i s e i r o s s e c c A d e z i r o h t u A 42 English Heavy-Duty Swivel Belt Clip (PMLN7128_) Swivel Carry Holster (PMLN7190_) Chargers Standard Multi-Unit Charger, US/NA Plug
(PMLN7101_) Standard Single Unit Charger, US/NA Plug
(PMLN7109_) Micro USB Power Supply, 5 V 1 A, US/NA Plug
(25009298001) Earbuds and Earpieces Earbud with In-line Mic/PTT, MagOne
(PMLN7156_) 2-Wire with Transparent Tube, Black
(PMLN7157_) 1-Wire Surveillance Earpiece, In-Line Mic and PTT
(PMLN7158_) Swivel Earpiece, In-line Mic and PTT
(PMLN7189_) Transparent Acoustic Tube (RLN6242_) High Noise Yellow Foam Earpieces (5080384F72) IMPRES Batteries, When Used Exclusively with IMPRES Chargers 18 Months Batteries and Chargers Warranty The Workmanship Warranty The workmanship warranty guarantees against defects in workmanship under normal use and service. All MOTOTRBO Batteries IMPRES Chargers
(Single-Unit and Multi-
Unit, Non-Display) IMPRES Chargers (Multi-
Unit with Display) Two (2) Years Two (2) Years One (1) Year The Capacity Warranty The capacity warranty guarantees 80% of the rated capacity for the warranty duration. Nickel Metal-Hydride
(NiMH) or Lithium-Ion (Li-
lon) Batteries 12 Months B a t t e r i e s a n d C h a r g e r s W a r r a n t y 43 English Limited Warranty MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
MOTOROLA SOLUTIONS, INC. (MOTOROLA) warrants the MOTOROLA manufactured Communication Products listed below (Product) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:
Digital Radios Product Accessories Two (2) Years One (1) Year MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original y t n a r r a W d e t i m L i 44 English applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. II. GENERAL PROVISIONS:
III. STATE LAW RIGHTS:
This warranty sets forth the full extent of MOTOROLA'S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLAs option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at 1-800-927-2744 US/Canada. i L m i t e d W a r r a n t y 45 English V. WHAT THIS WARRANTY DOES NOT COVER:
1 Defects or damage resulting from use of the Product in other than its normal and customary manner. 2 Defects or damage from misuse, accident, water, or neglect. 3 Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. 4 Breakage or damage to antennas unless caused directly by defects in material workmanship. 5 A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA's normal warranty inspection and testing of the Product to verify any warranty claim. 6 Product which has had the serial number removed or made illegible. 7 Rechargeable batteries if:
any of the seals on the battery enclosure of cells are broken or show evidence of tampering. the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. 8 Freight costs to the repair depot. 9 A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLAs published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. 10 Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. 11 Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against y t n a r r a W d e t i m L i 46 English the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
1 that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim, 2 that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise, and 3 should the Product or parts become, or in MOTOROLAs opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished i L m i t e d W a r r a n t y hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. 47 English VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, U.S.A. y t n a r r a W d e t i m L i 48 English BackCover_HalfLetter_P299C.fm Page 1 Friday, July 5, 2013 2:40 PM BackCover_HalfLetter_P299C.fm Page 2 Friday, July 5, 2013 2:40 PM MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2014 Motorola Solutions, Inc. All rights reserved. September 2014 www.motorolasolutions.com/mototrbo
*MN000895A01*
MN000895A01-A
1 2 3 | Manual - Non-Display Model | Users Manual | 1.34 MiB |
COMMERCIAL DIGITAL TWO-WAY RADIO MOTOTRBO SL SERIES SL300 NON-DISPLAY PORTABLE RADIOS USER GUIDE Contents Declaration of Conformity.........................4 Important Safety Information..........6 Software Version..............................7 Consignes de scurit importantes...................................8 Version logicielle............................. 9 Computer Software Copyrights....10 Handling Precautions....................11 Getting Started...............................12 How to Use This Guide..................................12 What Your Dealer/System Administrator Can Tell You.............................................12 Preparing Your Radio for Use.......13 Charging the Battery......................................13 Attaching the Battery..................................... 13 Attaching the Antenna................................... 14 Attaching the Earpiece/Audio Accessory.......15 Powering Up the Radio..................................15 Adjusting the Volume.....................................16 Identifying Radio Controls............17 Radio Controls...............................................17 Programmable Buttons..................................17 Assignable Radio Functions............... 18 Assignable Settings or Utility Functions....................................... 18 Accessing the Programmed Action List.........18 Push-To-Talk (PTT) Button............................19 On/Off/Information Button..............................20 C o n t e n t s 1 English Switching Between Conventional Analog and Digital Mode.......................................21 Identifying Status Indicators.........22 LED Indicator.................................................22 Audio Tones...................................................23 Indicator Tones..............................................23 Making and Receiving Calls .........24 Selecting a Channel.......................................24 Receiving and Responding to a Radio Call... 24 Receiving and Responding to a Group Call......................................24 Receiving and Responding to a Private Call ................................... 25
.......................25 Receiving an All Call Receiving and Responding to a Selective Call
.............................26 Making a Radio Call.......................................26 Making a Group Call........................... 26
......................27 Making a Private Call Making an All Call
...........................28 Making a Selective Call ......................28 Talkaround.....................................................29 s t n e t n o C 2 English Advanced Features........................30 Scan Lists...................................................... 30 Scan...............................................................30 Starting and Stopping Scan................ 30 Responding to a Transmission During a Scan................................ 30 Deleting a Nuisance Channel............. 31 Restoring a Nuisance Channel........... 31
..................................................31 Vote Scan Call Indicator Settings....................................32 Escalating Alarm Tone Volume...........32 Call Alert Operation....................................... 32 Receiving and Responding to a Call Alert........................................ 32 Making a Call Alert with the One Touch Access Button.....................32 Emergency Operation....................................32 Sending an Emergency Alarm............ 33 Sending an Emergency Alarm with Call.................................................34 Sending an Emergency Alarm with Voice to Follow ............................. 34 Reinitiating an Emergency Mode........35 Exiting Emergency Mode After Sending the Emergency Alarm...... 36 Privacy
.......................................................36 Lone Worker.................................................. 37 Password Lock Features............................... 37 Accessing the Radio from Password....................................... 37 Utilities........................................................... 38 Setting the Squelch Level................... 38 Setting the Power Level......................38 Turning the Voice Operating Transmission (VOX) Feature On or Off........................................ 38 Turning the Radio Tones/Alerts On or Off..............................................39 Voice Announcement..........................39 C o n t e n t s The Capacity Warranty..................................41 Limited Warranty......................................42 MOTOROLA COMMUNICATION PRODUCTS............................................. 42 I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:........................... 42 II. GENERAL PROVISIONS:......................... 43 III. STATE LAW RIGHTS:..............................43 IV. HOW TO GET WARRANTY SERVICE:...43 V. WHAT THIS WARRANTY DOES NOT COVER:....................................................44 VI. PATENT AND SOFTWARE PROVISIONS:.......................................... 44 VII. GOVERNING LAW:.................................46 Authorized Accessories List.........40 Antennas........................................................40 Batteries.........................................................40 Carry Devices................................................ 40 Chargers........................................................40 Earbuds and Earpieces................................. 40 Batteries and Chargers Warranty...........41 The Workmanship Warranty..........................41 3 English Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. Declaration of Conformity Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product:
Model Name: SL300 conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) y t i f m r o n o C f o n o i t a r a c e D l 4 English Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver. D e c a r a l t i o n o f C o n f o r m i t y 5 English isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with Motorola-approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Important Safety Information ATTENTION!
This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. For a list of Motorola-approved antennas and other accessories, visit the following website:
http://www.motorolasolutions.com Any modification to this device, not expressly authorized by Motorola, may void the users authority to operate this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent English n o i t a m r o n f I y t e f a S t n a t r o p m I 6 Software Version All the features described in the following sections are supported by the radio's software version R01.00.25 or later. Check with your dealer or system administrator for more details of all the features supported. S o f t w a r e V e r s o n i 7 English metteur. Afin de limiter les interfrences radio pour les autres utilisateurs, le type et le gain de l'antenne doivent tre choisis de faon ce que la puissance isotrope rayonne quivalente (P.I.R.E.) ne soit pas plus forte qu'il ne le faut pour tablir la communication. Cet metteur radio a t approuv par Industrie Canada pour utilisation avec une antenne approuve par Motorola offrant le gain maximal autoris et l'impdance requise pour le type d'antenne indiqu. Il est strictement interdit d'utiliser avec cet appareil tout type d'antenne ne figurant pas dans cette liste et prsentant un gain suprieur au maximum indiqu pour le type. Consignes de scurit importantes ATTENTION!
Cette radio ne doit tre utilise qu' des fins professionnelles. Avant d'utiliser la radio, lisez le guide Radios bidirectionnelles : exposition aux radiofrquences et scurit du produit, qui contient d'importantes instructions de fonctionnement pour une utilisation scuritaire et des informations sur l'exposition aux frquences radiolectriques, dans le but dassurer votre conformit aux normes et rglements en vigueur. Visitez le site Web suivant pour obtenir la liste des antennes et des autres accessoires approuvs par Motorola :
http://www.motorolasolutions.com Toute modification effectue cet appareil sans l'autorisation explicite de Motorola peut annuler l'autorisation d'utiliser cet appareil. Selon la rglementation d'Industrie Canada, cet metteur radio ne peut tre utilis qu'avec une antenne dont le type et le gain maximal (ou minimal) sont approuvs par Industrie Canada pour cet s e t n a t r o p m i t i r u c s e d s e n g s n o C i 8 English Version logicielle Toutes les fonctions dcrites dans les sections suivantes sont prises en charge par la version R01.00.25 ou les versions ultrieures du logiciel de la radio. Pour obtenir davantage de renseignements propos des fonctions prises en charge, adressez-vous votre dtaillant ou votre administrateur de systme. V e r s o n i l i o g c e i l l e 9 English including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,
#5,701,390, #5,715,365, #5,649,050, #5,630,011,
#5,581,656, #5,517,511, #5,491,772, #5,247,579,
#5,226,084 and #5,195,166. Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-
exclusive license to use that arises by operation of law in the sale of a product. The AMBE+2 voice coding Technology embodied in this product is protected by intellectual property rights s t h g i r y p o C e r a w t f o S r e t u p m o C 10 English Handling Precautions The MOTOTRBO Series Digital Portable radio meets IP54 specifications, allowing the radio to withstand adverse field conditions such as being exposed to water or dust. Keep your radio clean and exposure to water should be avoided to help ensure proper functionality and performance. To clean the exterior surfaces of the radio, use a diluted solution of mild dishwashing detergent and fresh water (i.e. one teaspoon of detergent to one gallon of water). These surfaces should be cleaned whenever a periodic visual inspection reveals the presence of smudges, grease, and/or grime. Caution: The effects of certain chemicals and their vapors can have harmful results on certain plastics. Avoid using aerosol sprays, tuner cleaners and other chemicals. H a n d l i n g P r e c a u t i o n s 11 English What Your Dealer/System Administrator Can Tell You You can consult your dealer or system administrator about the following:
Is your radio programmed with any preset conventional channels?
Which buttons have been programmed to access other features?
What optional accessories may suit your needs?
What are the best radio usage practices for effective communication?
What maintenance procedures will help promote longer radio life?
Getting Started How to Use This Guide This User Guide covers the basic operation of the MOTOTRBO Portables. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information. Throughout this publication, the icons described next are used to indicate features supported in either the conventional Analog mode or conventional Digital mode:
Indicates a conventional Analog Mode-
Only feature. Indicates a conventional Digital Mode-
Only feature. For features that are available in both conventional Analog and Digital modes, no icon is shown. d e t r a t S g n i t t e G 12 English Preparing Your Radio for Use Attaching the Battery Charging the Battery 1 Align the battery contacts with the contacts inside the battery compartment. Insert the contact side of the battery first. Gently push the battery into place. P r e p a r i n g Y o u r R a d o i f Your radio is powered by a Lithium-Ion (Li-lon) battery. To avoid damage and to ensure compliance with warranty terms, charge the battery using a Motorola charger exactly as described in the charger user guide. All chargers can charge only Motorola authorized batteries. Other batteries may not charge. It is recommended your radio remains powered off while charging. Note: You can charge the battery with the radio using a USB cable connected to a computer. Charge a new battery 14 to 16 hours before initial use for best performance. Prior to charging a battery with the radio, it is recommended to turn the radio off. Batteries charge best at room temperature. The LED lights up solid red until the user unplugs the USB cable. o r U s e 2 To attach battery cover, align it in place and slide the battery latch until it snaps into place. Slide battery latch into lock position. 13 English 12 Attaching the Antenna Caution: If antenna needs to be replaced, ensure that only MOTOTRBO antennas are used. Neglecting this will damage your radio. See Antennas on page 40 for a list of available antennas. 1 With the radio turned off, set the antenna in its receptacle and turn clockwise. e s U r o f i o d a R r u o Y g n i r a p e r P 14 English 123 2 To remove the antenna, turn the antenna counterclockwise. Attaching the Earpiece/Audio Accessory The audio jack (
the radio. It is used to connect accessories to the radio.
) is located on the antenna side of Lift up the flap of the Audio Jack cover. Align the indicators (
) on both the connector and housing, then push until it fits in properly. Powering Up the Radio Short press the On/Off/Information Button (
The LED lights up solid green.
). P r e p a r i n g Y o u r R a d o i f o r U s e 15 English AA Adjusting the Volume
) up. To increase the volume, push the (+) Volume Button
(
To decrease the volume, push the () Volume Button down. Note: Your radio can be programmed to have a minimum volume offset where the volume level cannot be lowered past the programmed minimum volume. Check with your dealer or system administrator for more information. e s U r o f i o d a R r u o Y g n i r a p e r P 16 English A Identifying Radio Controls Radio Controls 4 Push-to-Talk (PTT) Button 5 Volume Button 6 Side Button 1[1]
7 Microphone 8 USB Connector 9 Accessory Connector 10 Speaker 11 Antenna Programmable Buttons I d e n i t i f y n g R a d o C o n t r o s i l 1 Channel Selector Switch 2 On/Off/Information Button 3 LED Indicator 1 These buttons are programmable. Your dealer can program the programmable buttons as shortcuts to radio functions depending on the duration of a button press:
Short press Pressing and releasing rapidly. Long press Pressing and holding for the programmed duration. Hold down Keeping the button pressed. Note: The programmed duration of a button press is applicable for all assignable radio/utility functions or settings. See Emergency Operation on page 32 for more information on the programmed duration of the Emergency button. 17 English 615 4 911107238 Assignable Radio Functions Actions A programmable button to access a CPS programmable action list. Emergency On/Off Depending on the programming, initiates or cancels an emergency. Mic AGC On/Off Toggles the internal microphone automatic gain control (AGC) on or off. Monitor Monitors a selected channel for activity. Nuisance Channel Delete Temporarily removes an unwanted channel, except for the Selected Channel, from the scan list. The Selected Channel refers to the users selected zone/channel combination from which scan is initiated. One Touch Access Directly initiates a predefined channel, a Private or Group Call, or a Call Alert. Permanent Monitor Monitors a selected channel for all radio traffic until function is disabled. Privacy Repeater/Talkaround Toggles between using a repeater and communicating directly with another radio. Toggles privacy on or off. Scan Toggles scan on or off. Voice Announcement On/Off Toggles voice announcement on or off. Voice Operating Transmission (VOX) Toggles VOX on or off. Assignable Settings or Utility Functions All Tones/Alerts Toggles all tones and alerts on or off. Power Level Toggles transmit power level between high and low. Squelch and normal. Toggles squelch level between tight Accessing the Programmed Action List You can access the CPS programmable action list by using the programmed Actions button. 1 Press the programmed Actions button. A tone sounds, and the radio plays the item announcement voice message. l i s o r t n o C o d a R g n y f i t n e d I i 18 English 2 Press the programmed Actions button again to navigate to the next item in the action list. A tone sounds, and the radio plays the item announcement voice message. 3 Press the Volume Button up or down to toggle on or off, or change the status of the item. A tone sounds, and the radio plays the item announcement voice message Push-To-Talk (PTT) Button The PTT button on the side of the radio (
two basic purposes:
) serves I d e n i t i f y n g R a d o C o n t r o s i l While a call is in progress, the PTT button allows the radio to transmit to other radios in the call. Press and hold down PTT button to talk. Release the PTT button to listen. The microphone is activated when the PTT button is pressed. While a call is not in progress, the PTT button is used to make a new call (see Making a Radio Call on page 26). 19 English A If the Talk Permit Tone or the PTT Sidetone is enabled, wait until the short alert tone ends before talking. During a call, if the Channel Free Indication feature is enabled on your radio (programmed by your dealer), you will hear a short alert tone the moment the target radio (the radio that is receiving your call) releases the PTT button, indicating the channel is free for you to respond. You will also hear a continuous talk prohibit tone, if your call is interrupted, indicating that you should release the PTT button, for example when the radio receives an Emergency Call. On/Off/Information Button The On/Off/Information button at the top of the radio
(
) serves two basic purposes:
l i s o r t n o C o d a R g n y f i t n e d I i 20 English The On/Off/Information button is used to power the radio on or off. See Powering Up the Radio on page 15 for details on powering up the radio. When the radio is powered on, the On/Off/
Information button is used to play the battery strength announcement voice message, and show the LED indicator of the battery strength of the radio battery. Short press the On/Off/Information button when the radio is powered on. A Switching Between Conventional Analog and Digital Mode Each channel in your radio can be configured as a conventional analog or conventional digital channel. Use the Channel Selector Switch (
between an analog or a digital channel.
) to switch Your radio also has features available in both analog and digital mode. However, the minor differences in the way each feature works does not affect the performance of your radio. Note: Your radio also switches between digital and analog modes during a dual mode scan (see Scan on page 30). I d e n i t i f y n g R a d o C o n t r o s i l When switching from digital to analog mode, certain features are unavailable. 21 English A Identifying Status Indicators LED Indicator The LED indicator (
your radio.
) shows the operational status of s r o t i a c d n t t I s u a S g n y f i t n e d I i 22 English Solid red Blinking red Radio is charging. Radio is transmitting at low battery condition, receiving an emergency transmission, has failed the self-test upon powering up, has charging errors or has moved out of range if radio is configured with Auto-Range Transponder System. Also indicates low battery charge when the On/Off button is pressed. Radio is monitoring a conventional channel. Also indicates fair battery charge when the On/Off button is pressed. Radio is scanning for activity or receiving a Call Alert, or the flexible receive list is enabled. Radio is powering up, sending a Call Alert or an emergency transmission, or transmitting. Also indicates full charge of the Solid yellow Blinking yellow Solid green A battery when the programmable On/Off button is pressed. Radio is receiving a call or data, or detecting activity over the air. Momentary Tone Sounds only once for a short period of time defined by the radio. Indicator Tones High pitched tone Low pitched tone Blinking green Audio Tones Positive Indicator Tone Negative Indicator Tone Audio tones provide you with audible indications of the status, or response to data received on the radio. Continuous Tone Periodic Tone Repetitive Tone A monotone sound. Sounds continuously until termination. Sounds periodically depending on the duration set by the radio. Tone starts, stops, and repeats itself. A single tone that repeats itself until it is terminated by the user. I d e n i t i f y n g S a t t u s I n d c a i t o r s 23 English Making and Receiving Calls Selecting a Channel Transmissions are sent and received on a channel. Your radio supports up to 2 channels. Depending on your radios configuration, each channel may have been programmed differently to support different groups of users or supplied with different features. Push the Channel Selector Switch to select the channel. Receiving and Responding to a Radio Call Once the channel, subscriber ID, or group ID is set, you can proceed to receive and respond to calls. The LED lights up solid green while the radio is transmitting and blinks green when the radio is receiving. Receiving and Responding to a Group Call To receive a call from a group of users, your radio must be configured as part of that group. s l l i i a C g n v e c e R d n a g n k a M i 24 English LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. The LED lights up solid green. 2 Wait for one of the following tones to finish (if enabled), and speak clearly into the microphone. The Talk Permit Tone. The PTT Sidetone. 3 Release the PTT button to listen. If there is no voice activity for a predetermined period of time, the call ends. Note: See Making a Group Call on page 26 for details on making a Group Call. Receiving and Responding to a Private Call A Private Call is a call from an individual radio to another individual radio. When you receive a Private Call, the LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. The LED lights up solid green. 2 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 3 Release the PTT button to listen. If there is no voice activity for a predetermined period of time, the call ends. M a k n g i a n d R e c e v n g C a i i l l s See Making a Private Call on page 27 for details on making a Private Call. Receiving an All Call An All Call is a call from an individual radio to every radio on the channel. It is used to make important announcements requiring the users full attention. When you receive an All Call, a tone sounds and the LED blinks green. Your radio unmutes and the incoming call sounds through the radio speaker. An All Call does not wait for a predetermined period of time before ending. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is now available for use. You cannot respond to an All Call. Note: The radio stops receiving the All Call if you switch to a different channel while receiving the call. During an All Call, you will not be able to use any programmed button functions until the call ends. 25 English Receiving and Responding to a Selective Call A Selective Call is a call from an individual radio to another individual radio. It is a Private Call on an analog system. When you receive a Selective Call, the LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. s l l 2 Press the PTT button to respond to the call. The LED lights up solid green. i i a C g n v e c e R d n a g n k a M i 3 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 4 Release the PTT button to listen. If there is no voice activity for a predetermined period of time, the call ends. See Making a Private Call on page 27 for details on making a Private Call. Making a Radio Call You can select a channel by using:
Channel Selector Switch. A programmed One Touch Access button Note: Your radio must have the Privacy feature enabled on the channel to send a privacy-enabled transmission. Only target radios with the same Privacy Key as your radio will be able to unscramble the transmission. Note: See Privacy on page 36 for more information. Making a Group Call To make a call to a group of users, your radio must be configured as part of that group. 1 Do one of the following. Select the channel with the active group alias or ID. See Selecting a Channel on page 24. Press the programmed One Touch Access button. 26 English 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. 4 Release the PTT button to listen. When the target radio responds, the LED blinks green. 5 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. Making a Private Call setting up the call, while the other sets up the call immediately. Only one of these call types can be programmed to your radio by your dealer. You will hear a negative indicator tone, when you make a Private Call via the One Touch Access button, if this feature is not enabled. Use the Call Alert features to contact an individual radio. See Call Alert Operation on page 32 for more information. 1 Do one of the following. Select the channel with the active subscriber alias or ID. See Selecting a Channel on page 24. Press the programmed One Touch Access button. While you can receive and/or respond to a Private Call initiated by an authorized individual radio, your radio must be programmed for you to initiate a Private Call. There are two types of Private Calls. The first type, where a radio presence check is performed prior to 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. 4 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. M a k n g i a n d R e c e v n g C a i i l l s 27 English 5 Release the PTT button to listen. 3 Press the PTT button to make the call. When the target radio responds, the LED blinks green. 6 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. You hear a short tone. Making an All Call This feature allows you to transmit to all users on the channel. Your radio must be programmed to allow you to use this feature. Users on the channel cannot respond to an All Call. 1 Select the channel with the active All Call group alias or ID. See Selecting a Channel on page 24. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. Making a Selective Call Just like a Private Call, while you can receive and/or respond to a Selective Call initiated by an authorized individual radio, your radio must be programmed for you to initiate a Selective Call. 1 Select the channel with the active subscriber alias or ID. See Selecting a Channel on page 24. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. 4 Wait for one of the following tones to finish (if enabled), and speak clearly into the microphone. The Talk Permit Tone. The PTT Sidetone. 5 Release the PTT button to listen. When the target radio responds, the LED blinks green. s l l i i a C g n v e c e R d n a g n k a M i 28 English If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. You hear ... Negative Indicator Tone Talkaround You can continue to communicate when your repeater is not operating, or when your radio is out of the repeaters range but within talking range of other radios. This is called talkaround. The Talkaround setting is retained even after powering down. Press the programmed Repeater/Talkaround button. You hear ... Positive Indicator Tone Indicating ... Radio is in Talkaround mode. Indicating ... Radio is in Repeater mode. M a k n g i a n d R e c e v n g C a i i l l s 29 English Advanced Features Scan Lists Scan lists are created and assigned to individual channels/groups. Your radio can support up to 3 scan lists, with a maximum of 16 members in a list. Scan When you start a scan, your radio cycles through the programmed scan list for the current channel looking for voice activity. The LED blinks yellow. There are two ways of initiating scan:
Main Channel Scan (Manual): Your radio scans all the channels/groups in your scan list. On entering scan, your radio may depending on the settings automatically start on the last scanned active channel/group or on the channel where scan was initiated. Auto Scan (Automatic): Your radio automatically starts scanning when you select a channel/group that has Auto Scan enabled. Starting and Stopping Scan Do one of the following. Press the programmed Scan button. Use the Channel Selector Switch to select a channel programmed with Auto Scan enabled. The LED blinks yellow and you hear a positive indicator tone, when Scan is enabled. The LED turns off and you hear a negative indicator tone, when Scan is disabled. Responding to a Transmission During a Scan During scanning, your radio stops on a channel/group where activity is detected. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. t s e r u a e F d e c n a v d A 30 English 2 Press the PTT button during hang time. The LED lights up solid green. 3 Release the PTT button to listen. If you do not respond within the hang time, the radio returns to scanning other channels/groups. Deleting a Nuisance Channel If a channel continually generates unwanted calls or noise (termed a nuisance channel), you can temporarily remove the unwanted channel from the scan list. This capability does not apply to the channel designated as the Selected Channel. 1 When your radio locks on to an unwanted or nuisance channel, press the programmed Nuisance Channel Delete button until you hear a tone. 2 Release the Nuisance Channel Delete button. The nuisance channel is deleted. Restoring a Nuisance Channel To restore the deleted nuisance channel, do one of the following:
Turn the radio off and then power it on again. Stop and restart a scan via the programmed Scan Change the channel via the Channel Selector button. Switch. A d v a n c e d F e a t u r e s Vote Scan Vote Scan provides you with wide area coverage in areas where there are multiple base stations transmitting identical information on different analog channels. Your radio scans analog channels of multiple base stations and performs a voting process to select the strongest received signal. Once that is established, your radio unmutes to transmissions from that base station. The LED blinks yellow during the Vote Scan operation. 31 English To respond to a transmission during a Vote Scan, follow the same procedures as Responding to a Transmission During a Scan on page 30. Press the PTT button within four (4) seconds of receiving a Call Alert page to respond to the Private Call. Call Indicator Settings Making a Call Alert with the One Touch Access Button You can turn on or off the ringing tones for a received Private Call (see Turning the Radio Tones/Alerts On or Off on page 39). Escalating Alarm Tone Volume You can program your radio to continually alert you when a radio call remains unanswered. This is done by automatically increasing the alarm tone volume over time. This feature is known as Escalert. Call Alert Operation Call Alert paging enables you to alert a specific radio user to call you back when they are able to do so. This feature is accessible via a programmed One Touch Access button. Receiving and Responding to a Call Alert When you receive a Call Alert page, you hear a repetitive tone and the LED blinks yellow. Press the programmed One Touch Access button to make a Call Alert to the predefined alias or ID. The LED lights up solid green when your radio is sending the Call Alert. If the Call Alert acknowledgement is received, a tone sounds. If the Call Alert acknowledgement is not received, a low-pitch tone sounds. Emergency Operation An Emergency Alarm is used to indicate a critical situation. You are able to initiate an Emergency at any time even when there is activity on the current channel. Your dealer can set the duration of a button press for the programmed Emergency button, except for long press, which is similar with all other buttons:
t s e r u a e F d e c n a v d A 32 English Short press Between 0.05 seconds and 0.75 seconds Long press Between 1.00 second and 3.75 seconds The Emergency button is assigned with the Emergency On/Off feature. Check with your dealer for the assigned operation of the Emergency button. Note: If the short press for the Emergency button is assigned to turn on the Emergency mode, then the long press for the Emergency button is assigned to exit the Emergency mode. If the long press for the Emergency button is assigned to turn on the Emergency mode, then the short press for the Emergency button is assigned to exit the Emergency mode. Your radio supports three Emergency Alarms:
Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow Note: Only ONE of the Emergency Alarms above can be assigned to the programmed Emergency button. In addition, each alarm has the following types:
Regular Radio transmits an alarm signal and shows audio and/or visual indicators. Silent Radio transmits an alarm signal without any audio or visual indicators. Radio receives calls without any sound through the radios speaker, until you press the PTT button to initiate the call. Silent with Voice Radio transmits an alarm signal without any audio or visual indicators, but allow incoming calls to sound through the radios speaker. A d v a n c e d F e a t u r e s Sending an Emergency Alarm This feature allows you to send an Emergency Alarm, a non-voice signal, which triggers an alert indication on a group of radios. If your radio is set to Silent, it does not display any audio or visual indicators during Emergency mode. Press the programmed Emergency On button. When an Emergency Alarm acknowledgement is received, the Emergency tone sounds and the LED blinks green. If your radio does not receive an Emergency Alarm acknowledgement, and after all retries have been exhausted, a tone sounds. 33 English Radio exits the Emergency Alarm mode. Sending an Emergency Alarm with Call This feature allows you to send an Emergency Alarm to a group of radios. Upon acknowledgement by a radio within the group, the group of radios can communicate over a programmed Emergency channel. If your radio is set to Silent, it does not display any audio or visual indicators during Emergency mode, or allow any received calls to sound through the radios speaker, until you press the PTT button to initiate the call. If your radio is set to Silent with Voice, it does not display any audio or visual indicators during Emergency mode, but allow incoming calls to sound through the radios speaker. The indicators only appear once you press the PTT button to initiate, or respond to, the call. 1 Press the programmed Emergency On button. The LED lights up solid green. t s e r u a e F d e c n a v d A 34 English When an Emergency Alarm acknowledgement is received, the Emergency tone sounds and the LED blinks green. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press PTT button to make the call. The LED lights up solid green. 4 Release the PTT button to listen. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. 5 Press the PTT button to respond. 6 Once your call ends, press Emergency Off button to exit the Emergency mode. Sending an Emergency Alarm with Voice to Follow This feature allows you to send an Emergency Alarm to a group of radios. Your radios microphone is automatically activated, allowing you to communicate with the group of radios without pressing the PTT button. This activated microphone state is also known as hot mic. Note: Some accessories may not support hot mic. Check with your dealer or system administrator for more information. If you press the PTT button during the programmed hot mic transmission period, you hear a prohibit tone, indicating that you should release the PTT button. The radio ignores the PTT press and remains in Emergency mode. Note: If you press the PTT button during hot mic, and continue to press it after the hot mic duration expires, the radio continues to transmit until you release the PTT button. If your radio is set to Silent, it does not display any audio or visual indicators during Emergency mode, or allow any received calls to sound through the radios speaker, until the programmed hot mic transmission period is over, and you press the PTT button. If your radio is set to Silent with Voice, it does not display any audio or visual indicators during Emergency mode when you are making the call with hot mic, but allow sound through the radios speaker when the target radio responds after the programmed A d v a n c e d F e a t u r e s hot mic transmission period is over. The indicators only appear when you press the PTT button. Note: If the Emergency Alarm request fails, the radio does not retry to send the request, and enters the hot mic state directly. 1 Press the programmed Emergency On button. The LED lights up solid green. 2 Once a tone sounds, speak clearly into the microphone. When hot mic has been enabled, the radio automatically transmits without a PTT button press until the hot mic duration expires. While transmitting, the LED lights up solid green. 3 Once the hot mic duration expires, the radio automatically stops transmitting. To transmit again, press the PTT button. Reinitiating an Emergency Mode Note: This feature is only applicable to the radio sending the Emergency Alarm. There are two instances where this can happen:
35 English You change the channel while the radio is in Emergency mode. This exits the Emergency mode. If Emergency Alarm is enabled on this new channel, the radio reinitiates Emergency. You press the programmed Emergency On button during an Emergency initiation/transmission state. This causes the radio to exit this state, and to reinitiate Emergency. Exiting Emergency Mode After Sending the Emergency Alarm Note: This feature is only applicable to the radio sending the Emergency Alarm. Your radio exits Emergency mode when one of the following occurs:
Emergency Alarm acknowledgement is received
(for Emergency Alarm only). All retries to send the alarm have been exhausted. The Emergency Off button is pressed. Note: If your radio is powered off, it exits the Emergency mode. The radio will not reinitiate the Emergency mode automatically when it is turned on again. t s e r u a e F d e c n a v d A 36 English Privacy If enabled, this feature helps to prevent eavesdropping by unauthorized users on a channel by the use of a software-based scrambling solution. The signaling and user identification portions of a transmission are not scrambled. Your radio must have privacy enabled on the channel to send a privacy-enabled transmission, although this is not a necessary requirement for receiving a transmission. While on a privacy-enabled channel, the radio is still able to receive clear (unscrambled) transmissions. Your radio only supports Basic Privacy. To unscramble a privacy-enabled call or data transmission, your radio must be programmed to have the same Privacy Key (for Basic Privacy) as the transmitting radio. If your radio receives a scrambled call that is of a different Privacy Key, or a different Key Value and Key ID, you will hear a garbled transmission (Basic Privacy). The LED lights up solid green while the radio is transmitting and blinks green rapidly when the radio is receiving an ongoing privacy-enabled transmission. Note: Some radio models may not offer this Privacy feature. Check with your dealer or system administrator for more information. Lone Worker This feature raises an emergency if there is no user activity, such as any radio button press or activation of the channel selector, for a predefined time. Before raising the emergency, when the inactivity timer expires, the radio warns the user via an audio indicator. If there is still no acknowledgement by the user before the predefined reminder timer expires, the radio initiates an Emergency Alarm. Only one of the following Emergency Alarms can be assigned to this feature:
Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow The radio remains in the emergency state allowing voice messages to proceed until action is taken. See Emergency Operation on page 32 on ways to exit Emergency. Note: This feature is limited to radios with this function enabled. Check with your dealer or system administrator for more information. A d v a n c e d F e a t u r e s Password Lock Features If enabled, this feature only allows you access your radio if the correct password is entered upon powering up. Accessing the Radio from Password 1 Power up your radio. You hear a continuous tone. 2 Push the Channel Selector Switch to enter the first digit of the password. 3 Press Side Button 1 to enter each digit of the remaining three digits of the password. When the second digit of the password is entered, your radio ignores any push of the Channel Selector Switch. When the last digit of the four-digit 37 English password is entered, your radio automatically checks the validity of the password. You hear a positive indicator tone for every digit entered. If the password is correct, your radio proceeds to power up. See Powering Up the Radio on page 15. If the password is incorrect, you hear a continuous tone. Repeat steps 1 to 3. Utilities Setting the Squelch Level You can adjust your radio's squelch level to filter out unwanted calls with low signal strength or channels that have a higher than normal background noise. Normal Squelch is the default. Tight Squelch filters out (unwanted) calls and/or background noise;
however, calls from remote locations may also be filtered out. Press the programmed Squelch button. Tone heard ... Positive Indicator tone Negative Indicator tone Normal Squelch Radio operating in ... Tight Squelch Setting the Power Level You can customize your radios power setting to high or low for each channel. High Power enables communication with radios located at a considerable distance from you. Low Power enables communication with radios in closer proximity. Press the programmed Power Level button. Tone heard ... Radio transmitting at ... Positive Indicator tone Low Power Negative Indicator tone High Power Turning the Voice Operating Transmission (VOX) Feature On or Off This feature allows you to initiate a hands-free voice activated call on a programmed channel. The radio t s e r u a e F d e c n a v d A 38 English automatically transmits, for a programmed period, whenever the microphone on the VOX-capable accessory detects voice. Pressing the PTT button during radio operation will disable VOX. To re-enable VOX, do one of the following:
Turn the radio off and power it on again. Change the channel via the Channel Selector Press the programmed VOX button to toggle the Switch. feature on or off. Note: Turning this feature on or off is limited to radios with this function enabled. Check with your dealer or system administrator for more information. Turning the Radio Tones/Alerts On or Off You can enable and disable all radio tones and alerts
(except for the incoming Emergency alert tone) if needed. Press the programmed All Tones/Alerts button. A d v a n c e d F e a t u r e s Tone heard ... Positive Indicator tone Indication All tones and alerts are ON. Negative Indicator tone All tones and alerts are OFF. Voice Announcement This feature enables the radio to audibly indicate the current Zone or Channel the user has just assigned, or programmable button press. This audio indicator can be customized per customer requirements. Press the programmed Voice Announcement button. Tone heard ... Positive Indicator tone Indication All tones and alerts are ON. Negative Indicator tone All tones and alerts are OFF. 39 English Authorized Accessories List Antennas UHF, 403 425 MHz, 4.5 cm, Stubby Antenna
(PMAE4093_) UHF, 420 445 MHz, 4.5 cm, Stubby Antenna
(PMAE4094_) UHF, 435 470 MHz, 4.5 cm, Stubby Antenna
(PMAE4095_) VHF, 136 144 MHz, 5.0 cm, Stubby Antenna
(PMAD4144_) VHF, 144 156 MHz, 5.0 cm, Stubby Antenna
(PMAD4145_) VHF, 156 174 MHz, 5.0 cm, Stubby Antenna
(PMAD4146_) Batteries Lithium-Ion 2200 mAh Battery (PMNN4468_) Battery Door (PMLN7074_) Carry Devices Nylon Wrist Strap (PMLN6074_) Flexible Quick Release Hand Strap (PMLN7076_) t s L i s e i r o s s e c c A d e z i r o h t u A 40 English Heavy-Duty Swivel Belt Clip (PMLN7128_) Swivel Carry Holster (PMLN7190_) Chargers Standard Multi-Unit Charger, US/NA Plug
(PMLN7101_) Standard Single Unit Charger, US/NA Plug
(PMLN7109_) Micro USB Power Supply, 5 V 1 A, US/NA Plug
(25009298001) Earbuds and Earpieces Earbud with In-line Mic/PTT, MagOne
(PMLN7156_) 2-Wire with Transparent Tube, Black
(PMLN7157_) 1-Wire Surveillance Earpiece, In-Line Mic and PTT
(PMLN7158_) Swivel Earpiece, In-line Mic and PTT
(PMLN7189_) Transparent Acoustic Tube (RLN6242_) High Noise Yellow Foam Earpieces (5080384F72) IMPRES Batteries, When Used Exclusively with IMPRES Chargers 18 Months Batteries and Chargers Warranty The Workmanship Warranty The workmanship warranty guarantees against defects in workmanship under normal use and service. All MOTOTRBO Batteries IMPRES Chargers
(Single-Unit and Multi-
Unit, Non-Display) IMPRES Chargers (Multi-
Unit with Display) Two (2) Years Two (2) Years One (1) Year The Capacity Warranty The capacity warranty guarantees 80% of the rated capacity for the warranty duration. Nickel Metal-Hydride
(NiMH) or Lithium-Ion (Li-
lon) Batteries 12 Months B a t t e r i e s a n d C h a r g e r s W a r r a n t y 41 English Limited Warranty MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
MOTOROLA SOLUTIONS, INC. (MOTOROLA) warrants the MOTOROLA manufactured Communication Products listed below (Product) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:
Digital Radios Product Accessories Two (2) Years One (1) Year MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original y t n a r r a W d e t i m L i 42 English applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. II. GENERAL PROVISIONS:
III. STATE LAW RIGHTS:
This warranty sets forth the full extent of MOTOROLA'S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLAs option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at 1-800-927-2744 US/Canada. i L m i t e d W a r r a n t y 43 English V. WHAT THIS WARRANTY DOES NOT COVER:
1 Defects or damage resulting from use of the Product in other than its normal and customary manner. 2 Defects or damage from misuse, accident, water, or neglect. 3 Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. 4 Breakage or damage to antennas unless caused directly by defects in material workmanship. 5 A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA's normal warranty inspection and testing of the Product to verify any warranty claim. 6 Product which has had the serial number removed or made illegible. 7 Rechargeable batteries if:
any of the seals on the battery enclosure of cells are broken or show evidence of tampering. the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. 8 Freight costs to the repair depot. 9 A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLAs published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. 10 Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. 11 Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against y t n a r r a W d e t i m L i 44 English the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
1 that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim, 2 that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise, and 3 should the Product or parts become, or in MOTOROLAs opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished i L m i t e d W a r r a n t y hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. 45 English VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, U.S.A. y t n a r r a W d e t i m L i 46 English BackCover_HalfLetter_P299C.fm Page 1 Friday, July 5, 2013 2:40 PM BackCover_HalfLetter_P299C.fm Page 2 Friday, July 5, 2013 2:40 PM MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2014 Motorola Solutions, Inc. All rights reserved. September 2014 www.motorolasolutions.com/mototrbo
*MN000897A01*
MN000897A01-A
1 2 3 | RF Safety Manual | Users Manual | 2.33 MiB |
6881095C98-K_SafetyP.book Page 1 Tuesday, September 3, 2013 3:56 PM RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS ATTENTION!
Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2007 2013 Motorola Solutions, Inc. All rights reserved. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, U.S.A.
*NNTN7223G*
NNTN7223G
*6881095C98*
6881095C98-K English 6881095C98-K_SafetyP.book Page 2 Tuesday, September 3, 2013 3:56 PM RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use NOTICE: This radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. English 2 6881095C98-K_SafetyP.book Page 3 Tuesday, September 3, 2013 3:56 PM Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/
www.motorolasolutions.com/rfhealth Federal Communication Commission (FCC) Regulations When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Motorola two-way radio has a RF Exposure Product Label. Also, your Motorola user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standards Your Motorola two-way radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk-50%
listen and is approved for occupational use only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. 3 English 6881095C98-K_SafetyP.book Page 4 Tuesday, September 3, 2013 3:56 PM NOTE: The approved batteries, supplied with this radio, are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby) even though this radio complies with FCC occupational exposure limits and may operate at duty factors of up to 50% talk. Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines:
United States Federal Communications Commission (FCC), Code of Federal Regulations; 47 CFR et seq. & FCC, OET Bulletin 65 Institute of Electrical and Electronic Engineers (IEEE) C95.1 International Commission on Non-Ionizing Radiation Protection (ICNIRP) Ministry of Health (Canada) Safety Code 6 & Industry Canada RSS-102 Australian Communications Authority Radiocommunications Standard et seq. ANATEL ANNEX to Resolution No. 303 et seq. RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures. DO NOT remove the RF Exposure Label from the device. User awareness instructions should accompany device when transferred to other users. English 4 6881095C98-K_SafetyP.book Page 5 Tuesday, September 3, 2013 3:56 PM Two-Way Radio Operation Transmit no more than the rated duty factor of 50% of the time. To transmit
(talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. The PTT button may reside on the radio itself or may be hosted on approved wired or wireless (for example, a Bluetooth enabled remote Push-to-Talk button) accessories. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). In front of the face. Hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips. Keeping the radio at a proper distance is important to ensure compliance. NOTE: RF exposures decrease with increasing distance from the antenna. Body Worn Operation. When worn on the body, always place the radio in a Motorola-approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of non-
Motorola-approved accessories may result in exposure levels, which exceed the occupational/controlled environment RF exposure limits. Use only Motorola-approved supplied or replacement antennas, batteries, and audio accessories. Use of non-Motorola-approved antennas, batteries, and wired or wireless accessories may exceed the applicable RF exposure guidelines (iEEE, ICNIRP or FCC). For a list of Motorola-approved accessories for your radio model, visit the following website: http://www.motorolasolutions.com/governmentandenterprise 5 English 6881095C98-K_SafetyP.book Page 6 Tuesday, September 3, 2013 3:56 PM Electromagnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers, Defibrillators or other Implanted Medical Devices Persons with pacemakers, Implantable cardioverter-defibrillators (ICDs) or other active implantable medical devices (AIMD) should:
Consult with their physicians regarding the potential risk of interference from radio frequency transmitters, such as portable radios (poorly shielded medical devices may be more susceptible to interference). Turn the radio OFF immediately if they have any reason to suspect that interference is taking place. Do not carry the radio in a chest pocket or near the implantation site, and carry or use the radio on the opposite side of their body from the implantable device to minimize the potential for interference. English 6 6881095C98-K_SafetyP.book Page 7 Tuesday, September 3, 2013 3:56 PM Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use of Communication Devices While Driving Always check the laws and regulations on the use of radios in the areas where you drive. Give full attention to driving and to the road. Use hands-free operation, if available. Pull off the road and park before making or answering a call, if driving conditions or regulations so require. 7 English 6881095C98-K_SafetyP.book Page 8 Tuesday, September 3, 2013 3:56 PM Acoustic Safety Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. To protect your hearing:
Use the lowest volume necessary to do your job. Turn up the volume only if you are in noisy surroundings. Turn down the volume before adding headset or earpiece. Limit the amount of time you use headsets or earpieces at high volume. When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear. Operational Warnings W A R N I N G For Vehicle With Air Bags:
Refer to vehicle manufacturer's manual prior to installation of electronic equipment to avoid interference with air bag wiring. DO NOT place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. Operational Warnings (Continued) English 8 6881095C98-K_SafetyP.book Page 9 Tuesday, September 3, 2013 3:56 PM W A R N I N G Potentially Explosive Atmospheres
(Explosive atmospheres refers to hazard classified locations that may contain hazardous gas, vapors, or dusts.) Turn off your radio prior to entering any area with a potentially explosive atmosphere unless it is a portable radio type especially qualified for use in such areas as Intrinsically Safe (for example, Factory Mutual, CSA, UL, or CENELEC). DO NOT remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted. Blasting Caps and Blasting Areas To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: "Turn off two-way radio." Obey all signs and instructions. 9 English 6881095C98-K_SafetyP.book Page 10 Tuesday, September 3, 2013 3:56 PM Operational Cautions C a u t i o n Antennas DO NOT use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury, such as burns, if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Hazard Locations (Intrinsically) Safe Radio Information The Intrinsically safe approval unit refers to a product that has been approved as intrinsically safe by an approval agency (for example FM Approvals, CSA, UL, or Cenelec) and certifies that a particular product meets the Agency's applicable intrinsic safety standards for specific types of hazardous classified locations. A portable radio that has been approved for intrinsic safety will have Approval label attached to the radio to identify the unit as being Approved for specified hazardous atmospheres. This label specifies the hazardous Class/Division/Group along with the part number of the battery that must be used. The Intrinsically Safe Approval Label will be located on the portable radio unit. English 10 6881095C98-K_SafetyP.book Page 11 Tuesday, September 3, 2013 3:56 PM Operational Cautions for Intrinsic Safe Equipment C a u t i o n DO NOT operate radio communications equipment in a hazardous atmosphere unless it is a type especially qualified (for example, FM, UL, CSA, or CENELEC approved). An explosion or fire may result. DO NOT operate a radio unit that has been approved as intrinsically safe product in a hazardous atmosphere if it has been physically damaged (for example, cracked housing). An explosion or fire may result. DO NOT replace or charge batteries in a hazardous atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion or fire. Warnings for Radios Approved as Intrinsically Safe Radios must ship from the Motorola manufacturing facility with the hazardous atmosphere capability and the intrinsic safety approval labelling (FM, UL, CSA, CENELEC). Radios will not be upgraded to this capability and labeled once they have been shipped to the field. A modification changes the units hardware from its original design configuration. Modifications can only be made by the original product manufacturer. 11 English 6881095C98-K_SafetyP.book Page 12 Tuesday, September 3, 2013 3:56 PM W A R N I N G Repair W A R N I N G DO NOT replace or change accessories in a hazardous atmosphere. Contact sparking may occur while installing or removing accessories and cause an explosion or fire. Turn the radio off before removing or installing a battery or accessory. DO NOT disassemble an intrinsically safe product in any way that exposes the internal circuits of the unit. Failure to use an intrinsically safe approved battery or Approved accessories specifically approved for the radio unit may result in the dangerously unsafe condition of an unapproved radio combination being used in a hazardous location. Unauthorized or incorrect modification of the intrinsically safe approved Product will negate the approval rating of the product. Incorrect repair or relabeling of any intrinsically safe Agency-
approved radio could adversely affect the Approval rating of the unit. Use of a radio that is not intrinsically safe in a hazardous atmosphere could result in serious injury or death. REPAIRS FOR MOTOROLA PRODUCTS WITH INTRINSICALLY SAFE APPROVAL ARE THE RESPONSIBILITY OF THE USER. Repairs to a Motorola FM approved radio product should only be done at a location that has been FM audited under the FM 3605 repairs and service standard. Contact Motorola for assistance regarding repairs and service of Motorola intrinsically safe equipment. English 12 6881095C98-K_SafetyP.book Page 13 Tuesday, September 3, 2013 3:56 PM A repair constitutes something done internally to the unit that would bring it back to its original condition. Items not considered as repairs are those in which an action is performed on a unit which does not require the outer casing of the unit to be opened in a manner that exposes the internal electrical circuits of the unit. Do Not Substitute Options or Accessories The Motorola communications equipment certified as intrinsically safe by the approving agency, (FM, UL, CSA, CENELEC) is tested as a complete system which consists of the listed agency Approved portable, Approved battery, and Approved accessories or options, or both. This Approved portable and battery combination must be strictly observed. There must be no substitution of items, even if the substitute has been previously Approved with a different Motorola communications equipment unit. Approved configurations are listed by the Approving Agency (FM, UL, CSA, CENELEC). The Intrinsically Safe Approval Label affixed to radio refers to the intrinsically safe classification of that radio product, and the approved batteries that can be used with that system. The manual PN referenced on the Intrinsically Safe Approval Label identifies the approved Accessories and or options that can be used with that portable radio unit. Using a non-Motorola-intrinsically-safe battery and or accessory with the Motorola approved radio unit will void the intrinsically safe approval of that radio unit. 13 English 6881095C98-K_SafetyP.book Page 14 Tuesday, September 3, 2013 3:56 PM NOTES English 14 6881095C98-K_SafetyP.book Page 15 Tuesday, September 3, 2013 3:56 PM GUIA DE SEGURANA DO PRODUTO E EXPOSIO ENERGIA DE RF PARA RDIOS PORTTEIS BIDIRECIONAIS ATENO!
Antes de usar o rdio, leia este guia que contm instrues operacionais importantes para uso seguro, informaes sobre conscientizao e controle de exposio energia de radiofrequncia (RF) para conformidade com os padres e regulamentos aplicveis. MOTOROLA, MOTO, MOTOROLA SOLUTIONS e a letra "M"
estilizada do logotipo so marcas comerciais ou marcas registradas da Motorola Trademark Holdings, LLC e so utilizadas sob licena. Todas as demais marcas registradas so de propriedade de seus respectivos proprietrios. 2007 2013 Motorola Solutions, Inc. Todos os direitos reservados. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, E.U.A.
*NNTN7223F*
NNTN7223G 6881095C98-K Portugus do Brasil 6881095C98-K_SafetyP.book Page 16 Tuesday, September 3, 2013 3:56 PM Informaes sobre Conscientizao e Controle de Exposio RF e Instrues Operacionais para Uso Ocupacional COMUNICADO: este rdio destina-se ao uso em condies ocupacionais/
controladas, em que os usurios tm total conhecimento de sua exposio e possam exercer controle sobre sua exposio para atender aos limites ocupacionais definidos pela FCC e pelos padres internacionais. O dispositivo de rdio NO autorizado para uso pela populao em geral. Este rdio bidirecional usa energia eletromagntica no espectro de RF para fornecer comunicao distncia entre dois ou mais usurios. Ele usa energia de RF ou ondas de rdio para enviar e receber chamadas. A energia de RF uma forma de energia eletromagntica. Outras formas incluem, mas no so limitadas a, raios, raios solares e raios X. A energia de RF, entretanto, no deve ser confundida com essas outras formas de energia eletromagntica, que quando so usadas incorretamente, podem causar danos biolgicos. Nveis muito altos de raios X, por exemplo, podem danificar tecidos e material gentico. Especialistas em cincias, engenharia, medicina, sade e indstrias trabalham com organizaes para desenvolver padres de exposio segura energia de RF. Esses padres fornecem nveis recomendados de exposio RF para trabalhadores e para o pblico em geral. Os nveis recomendados de exposio RF incluem margens de segurana substanciais. Todos os rdios bidirecionais da Motorola so projetados, fabricados e testados para garantir que atendam aos nveis de exposio RF estabelecidos pelo governo. Alm disso, os fabricantes tambm recomendam instrues operacionais especficas para usurios de rdios bidirecionais. Essas instrues so importantes porque informam aos usurios sobre a exposio energia de RF e fornecem procedimentos simples sobre como controlar essa exposio. Portugus do Brasil 16 6881095C98-K_SafetyP.book Page 17 Tuesday, September 3, 2013 3:56 PM Consulte os sites a seguir para obter mais informaes sobre a exposio energia de RF e como controlar a exposio para garantir conformidade com os limites de exposio RF estabelecidos:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/
www.motorolasolutions.com/rfhealth Regulamentos da FCC Ao usar rdios bidirecionais por motivos de trabalho, a FCC (Federal Communication Commission, comisso federal de comunicao) requer que os usurios estejam totalmente conscientes e aptos a controlar sua exposio de modo a atender s exigncias ocupacionais. A conscientizao da exposio pode ser facilitada pelo uso de uma etiqueta no produto, direcionando o usurio para informaes de conscientizao especficas do usurio. O rdio bidirecional da Motorola possui uma Etiqueta no Produto sobre Exposio RF. Alm disso, o manual do usurio da Motorola, ou folheto de segurana em separado, inclui informaes e instrues operacionais necessrias para controlar a exposio RF e atender aos requisitos de conformidade. Conformidade com os Padres de Exposio RF O rdio bidirecional da Motorola foi projetado e testado para estar em conformidade com vrios padres e com as diretrizes nacionais e internacionais (listados a seguir) para exposio de seres humanos energia eletromagntica de radiofrequncia. Este rdio est em conformidade com os limites de exposio IEEE (Institute of Electrical and Electronic Engineers, instituto de engenheiros eltricos e eletrnicos) (FCC) e ICNIRP para ambientes ocupacionais/controlados de exposio RF em fatores operacionais de trabalho de at 50% de fala e 50%
de escuta e est aprovado apenas para uso ocupacional. Para medio de energia de RF para conformidade com essas diretrizes de exposio, o rdio gera energia de RF mensurvel apenas quando est transmitindo (na fala), no quando est recebendo (escuta) ou no modo de espera. 17 Portugus do Brasil 6881095C98-K_SafetyP.book Page 18 Tuesday, September 3, 2013 3:56 PM NOTA: as baterias aprovadas, fornecidas com o rdio, so para um fator de trabalho 5-5-90 (5% de fala-5% de escuta-90% de espera) apesar de o rdio estar em conformidade com os limites de exposio ocupacional da FCC e poder operar em fatores de trabalho de at 50% de fala. O rdio bidirecional da Motorola est em conformidade com os seguintes padres e diretrizes de exposio de energia de RF:
Cdigo de Regulamentos Federais da FCC; 47 CFR et seq. e FCC, OET Boletim 65 IEEE C95.1 ICNIRP (International Commission on Non-ionizing Radiation Protection. comisso internacional para a proteo contra as radiaes no ionizantes) Cdigo de segurana 6 do Ministrio da Sade (Canad) e da Indstria Canadense RSS-102 Australian Communications Authority Radiocommunications Standard et seq. ANEXO da ANATEL Resoluo n 303 et seq. Diretrizes de Conformidade e Controle de Exposio RF e Instrues Operacionais Relacionadas a Operaes de Rdios Bidirecionais Para controlar a exposio e garantir conformidade com os limites de exposio em ambientes ocupacionais/controlados, siga sempre os procedimentos a seguir. NO remova a Etiqueta de Exposio RF do dispositivo. As instrues de conscientizao do usurio devem acompanhar o dispositivo quando transferido para outros usurios. Portugus do Brasil 18 6881095C98-K_SafetyP.book Page 19 Tuesday, September 3, 2013 3:56 PM Operao do Rdio Bidirecional No transmitir alm do fator calculado nominal de 50% do tempo. Para transmitir (falar), pressione o boto PTT (Push-To-Talk). Para receber chamadas, solte o boto PTT. O boto PTT pode estar localizado no rdio ou em acessrios aprovados com ou sem fio (por exemplo, um boto PTT remoto compatvel com Bluetooth). importante transmitir em 50% do tempo ou menos, pois este rdio gera exposio RF mensurvel somente ao transmitir
(em termos de medio para conformidade de padres). Em frente do rosto. Segure o rdio na posio vertical com o microfone (e outras partes do rdio incluindo a antena) a, no mnimo, 2,5 centmetros de distncia do nariz e da boca. Manter o rdio distncia apropriada importante para garantir a conformidade. NOTA: quanto maior o distanciamento da antena, menores as exposies RF. Uso junto ao corpo. Ao usar o rdio junto ao corpo, coloque-o em um prendedor, suporte, suporte para cinto ou estojo para este produto aprovado pela Motorola. importante usar os acessrios aprovados para uso junto ao corpo, porque o uso de acessrios no aprovados pela Motorola pode resultar em nveis de exposio que excedem os limites de exposio RF para ambiente ocupacional/controlado. Use somente antenas, baterias e acessrios de udio fornecidos ou de substituio aprovados pela Motorola. O uso de antenas, baterias e acessrios com ou sem fio no aprovados pela Motorola, pode exceder as diretrizes aplicveis de exposio RF (IEEE, ICNIRP ou FCC). Para obter uma lista de acessrios aprovados pela Motorola para o modelo de seu rdio, acesse o site:
http://www.motorolasolutions.com/governmentandenterprise 19 Portugus do Brasil 6881095C98-K_SafetyP.book Page 20 Tuesday, September 3, 2013 3:56 PM Interferncia/Compatibilidade Eletromagntica NOTA: quase todo dispositivo eletrnico suscetvel interferncia eletromagntica (EMI) quando blindado, projetado ou de alguma forma configurado inadequadamente para compatibilidade eletromagntica. Instalaes Para evitar interferncia eletromagntica e/ou conflitos de compatibilidade, desligue o rdio em qualquer instalao onde haja avisos dizendo para faz-lo. Hospitais e casas de sade podem utilizar equipamentos sensveis energia de RF externa. Aeronaves Desligue seu rdio a bordo de aeronaves, quando orientado a faz-lo. O rdio deve ser utilizado de acordo com as instrues fornecidas pela tripulao. Equipamentos Mdicos Marca-passos, desfibriladores ou outros dispositivos mdicos implantados Pessoas com marca-passos, desfibriladores cardiovasculares implantveis
(ICDs) ou outros dispositivos mdicos implantveis ativos (AIMD) devem:
Entrar em contato com seus mdicos sobre o possvel risco de interferncia de transmissores frequncia de rdio, como rdios portteis (dispositivos mdicos com pouca proteo podem ser mais suscetveis interferncia). DESLIGUE o rdio imediatamente se houver qualquer motivo para se suspeitar de interferncia. No carregue o rdio em um bolso prximo ao peito ou rea do implante;
transporte ou use o rdio no lado oposto do dispositivo implantvel para minimizar possveis interferncias. Portugus do Brasil 20 6881095C98-K_SafetyP.book Page 21 Tuesday, September 3, 2013 3:56 PM Aparelhos Auditivos Alguns rdios digitais sem fio podem interferir em aparelhos auditivos. Caso haja esse tipo de interferncia, consulte o fabricante do aparelho auditivo para obter alternativas. Outros Equipamentos Mdicos Caso use outros equipamentos mdicos, consulte o fabricante para verificar se ele est adequadamente protegido contra energia de RF. Seu mdico pode ajud-lo a obter essas informaes. Uso de Equipamentos de Comunicao Durante a Operao de Veculos Informe-se sempre sobre as leis e normas a respeito do uso de rdios nas reas onde voc dirige. Preste ateno no trnsito e na rodovia. Use a opo viva-voz, se disponvel. Saia da rodovia e estacione o carro antes de fazer ou receber uma ligao, se as condies de trnsito ou as regulamentaes assim exigirem. 21 Portugus do Brasil 6881095C98-K_SafetyP.book Page 22 Tuesday, September 3, 2013 3:56 PM Segurana Acstica A exposio a rudos muito altos de qualquer origem por longos perodos pode prejudicar sua audio temporria ou permanentemente. Quanto mais alto for o volume do rdio, menos tempo ser necessrio para prejudicar sua audio. s vezes, os danos auditivos causados por rudos fortes no so detectados em sua fase inicial e podem ter efeito cumulativo. Para proteger sua audio:
Use o volume mais baixo necessrio para a execuo sua tarefa. S aumente o volume se estiver em ambientes com excesso de rudos. Reduza o volume antes de conectar o headset ou o fone de ouvido. Limite o tempo de uso dos headsets ou fones de ouvido com volume alto. Ao usar o rdio sem monofones ou fones de ouvido, no coloque o alto-falante do rdio diretamente em contato com seus ouvidos. Avisos Operacionais ATENO Para Veculos Equipados com Air Bag:
Consulte o manual do fabricante do veculo antes de instalar equipamentos eletrnicos para evitar interferncia com o funcionamento do air bag. NO coloque um rdio porttil na rea sobre um air bag ou na rea de liberao do air bag, pois eles inflam com muita fora. Se um rdio porttil estiver colocado na rea de liberao do air bag e o air bag inflar, o rdio poder ser impelido com grande fora e causar srios ferimentos aos ocupantes do veculo. Portugus do Brasil 22 6881095C98-K_SafetyP.book Page 23 Tuesday, September 3, 2013 3:56 PM Avisos Operacionais (continuao) ATENO Ambientes potencialmente explosivos
(Ambientes potencialmente explosivos referem-se a locais classificados como de risco que podem conter gases, vapores ou ps nocivos.) Desligue o rdio antes de entrar em uma rea com ambiente potencialmente explosivo, a menos que ele seja um tipo de rdio porttil especialmente qualificado para o uso em tais reas como Intrinsecamente Seguro (por exemplo, Factory Mutual, CSA, UL ou CENELEC). NO remova, instale ou carregue baterias nessas reas. Fascas em um ambiente potencialmente explosivo podem causar uma exploso ou incndio que pode resultar em ferimentos e at mesmo em morte. As reas com ambientes potencialmente explosivos referidas acima incluem reas de abastecimento, como reas abaixo do convs principal em barcos, instalaes de armazenamento ou transferncia de produtos qumicos ou combustveis e reas onde o ar contm partculas ou elementos qumicos, como fibras, poeira ou ps metlicos. As reas com ambientes potencialmente explosivos so frequentes, mas nem sempre h avisos sobre isso. reas e Equipamentos para Detonao Para evitar possveis interferncias em operaes de detonao, desligue o rdio quando estiver prximo a detonadores eltricos, reas de detonao ou reas onde haja avisos tais como: "Desligue o rdio bidirecional." Obedea a todas as sinalizaes e instrues. 23 Portugus do Brasil 6881095C98-K_SafetyP.book Page 24 Tuesday, September 3, 2013 3:56 PM Cuidados Operacionais Precauo Antenas NO utilize um rdio porttil com antena danificada. Se a antena danificada entrar em contato com sua pele, poder causar uma queimadura leve. Baterias Todas as baterias podem causar danos materiais e ferimentos, tais como queimaduras, se um material condutor como uma joia, chave ou corrente tocar os terminais expostos. O material condutor pode fechar um circuito eltrico (curto-circuito) e esquentar muito. Tenha cuidado ao manipular uma bateria carregada, principalmente ao coloc-la dentro do bolso, de uma bolsa ou em outro local em que haja objetos de metal. Informaes sobre Rdio (Intrinsecamente) Seguro em Locais de Risco A unidade de aprovao Intrinsecamente seguro refere-se a um produto que foi aprovado como intrinsecamente seguro por um rgo de aprovao (por exemplo, FM Approvals, CSA, UL ou Cenelec) e certifica que um determinado produto atende aos padres de segurana intrnseca aplicveis do rgo para determinados tipos de locais classificados como de risco. Um rdio porttil que foi aprovado como intrinsecamente seguro ter uma etiqueta de aprovao no rdio para identificar a unidade como aprovada para uso nas atmosferas de risco especificadas. Essa etiqueta especifica a classe, a diviso e o grupo de risco, bem como o nmero de pea da bateria que dever ser utilizada. A Etiqueta de Aprovao de Intrinsecamente Seguro estar localizada na unidade de rdio porttil. Portugus do Brasil 24 6881095C98-K_SafetyP.book Page 25 Tuesday, September 3, 2013 3:56 PM Cuidados na Operao de Equipamento de Segurana Intrnseca Precauo NO opere o equipamento de comunicaes de rdio em atmosferas de risco a menos que seja um tipo especialmente qualificado (por exemplo, aprovado pela FM, UL, CSA, ou CENELEC). O resultado poder ser uma exploso ou fogo. NO opere uma unidade de rdio aprovada como intrinsecamente segura em atmosferas de risco se ela estiver danificada fisicamente
(por exemplo, parte externa rachada). O resultado poder ser uma exploso ou fogo. NO substitua ou carregue baterias em atmosfera de risco. Podem ocorrer fascas no contato durante a instalao ou remoo das baterias, causando exploso ou fogo. Avisos para Rdios Aprovados como Intrinsecamente Seguros Os rdios devem ser enviados da fbrica da Motorola com a etiqueta de aprovao de recursos para atmosfera de risco e de segurana intrnseca (FM, UL, CSA, CENELEC). Os rdios no sero atualizados para esse recurso e etiquetados depois de serem enviados. Uma modificao altera o hardware da unidade da sua configurao de projeto original. As modificaes podem ser feitas apenas pelo fabricante original do produto. 25 Portugus do Brasil 6881095C98-K_SafetyP.book Page 26 Tuesday, September 3, 2013 3:56 PM ATENO NO substitua nem mude os acessrios em uma atmosfera de risco. Podem ocorrer fascas no contato durante a instalao ou remoo dos acessrios e causar exploso ou fogo. Desligue o rdio antes de remover ou instalar a bateria ou acessrio. NO desmonte um produto intrinsecamente seguro de forma a expor os circuitos internos da unidade. Se uma bateria intrinsecamente segura ou acessrios aprovados especificamente para o rdio no forem usados, poder resultar em uma condio insegura perigosa de uma combinao no aprovada sendo usada em um local de risco. A modificao incorreta ou no autorizada do Produto aprovado intrinsecamente seguro negar a aprovao da classificao do produto. Os reparos ou etiquetagem incorretos de um rdio aprovado como intrinsecamente seguro podero afetar a aprovao da classificao da unidade. O uso de um rdio que no intrinsecamente seguro em uma atmosfera de risco poder resultar em danos graves e at em morte. Reparos ATENO OS REPAROS DE PRODUTOS DA MOTOROLA COM APROVAO INTRINSECAMENTE SEGURA SO DE RESPONSABILIDADE DO USURIO. Os reparos em um rdio aprovado Motorola FM devero ser feitos apenas em um local auditado pela FM sob a norma de reparos e servios FM 3605. Entre em contato com a Motorola para obter assistncia sobre reparos e servios em equipamentos Motorola intrinsecamente seguros. Portugus do Brasil 26 6881095C98-K_SafetyP.book Page 27 Tuesday, September 3, 2013 3:56 PM Um reparo constitui algo sendo feito internamente na unidade que a retornar as suas condies originais. Os itens que no so considerados como reparos so os em que a ao realizada em uma unidade que no precisa que a parte externa seja aberta para expor os circuitos eltricos internos da unidade. No Substitua Opes ou Acessrios O equipamento de comunicao Motorola certificado como intrinsecamente seguro pelos rgos de aprovao (FM, UL, CSA, CENELEC), testado como um sistema completo que consiste do porttil aprovado, bateria aprovada e acessrios e/ou opes aprovados pelo rgo listado. Essa combinao de porttil e bateria aprovada deve ser estritamente observada. No pode haver substituio de itens, mesmo se o substituto tiver sido aprovado previamente com um equipamento de comunicaes Motorola diferente. As configuraes aprovadas so listadas pelo rgo Aprovador (FM, UL, CSA, CENELEC). A Etiqueta de Aprovao de Intrinsecamente Seguro afixada ao rdio refere-se classificao de intrinsecamente seguro do rdio e da bateria aprovada que pode ser usada com o sistema. O PN manual referenciado na Etiqueta de Aprovao de Intrinsecamente Seguro identifica os acessrios ou opes aprovados que podem ser usados com a unidade de rdio porttil. O uso de uma bateria e/ou acessrio intrinsecamente seguro no Motorola com a unidade de rdio aprovada da Motorola invalidar a aprovao de segurana intrnseca da unidade de rdio. 27 Portugus do Brasil 6881095C98-K_SafetyP.book Page 28 Tuesday, September 3, 2013 3:56 PM Notas:
Portugus do Brasil 28 6881095C98-K_SafetyP.book Page 29 Tuesday, September 3, 2013 3:56 PM RADIOS BIDIRECTIONNELLES PORTATIVES :
EXPOSITION AUX RADIOFRQUENCES ET SCURIT DU PRODUIT ATTENTION!
Avant d'utiliser cette radio, lisez le guide, qui contient d'importantes instructions de fonctionnement pour une utilisation scuritaire et des informations sur l'exposition aux frquences radiolectriques, dans le but dassurer votre conformit aux normes et rglements en vigueur. MOTOROLA, MOTO, MOTOROLA SOLUTIONS et le logotype au M stylis sont des marques de commerce ou des marques dposes de Motorola Trademark Holdings LLC et sont utilises sous licence. Toutes les autres marques de commerce sont la proprit de leurs titulaires respectifs. 2007 2013 Motorola Solutions, Inc. Tous droits rservs. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, U.S.A.
*NNTN7223F*
NNTN7223G 6881095C98-K Franais canadien 6881095C98-K_SafetyP.book Page 30 Tuesday, September 3, 2013 3:56 PM Sensibilisation l'exposition l'nergie de RF, moyens de contrle et consignes d'utilisation pour l'usage professionnel de cette radio NOTICE :Cette radio a t conue pour un usage professionnel dans un environnement contrl, o les utilisateurs sont pleinement conscients de l'exposition l'nergie de RF laquelle ils sont soumis et peuvent exercer un contrle sur cette exposition afin de respecter les limites tablies par la FCC et les normes internationales. Ce dispositif radio n'est PAS autoris pour l'utilisation grand public par des consommateurs ordinaires. Cette radio bidirectionnelle utilise de l'nergie lectromagntique dans le spectre de radiofrquence (RF) afin de permettre les communications distance entre deux utilisateurs ou plus. Elle utilise l'nergie de radiofrquence ou les ondes radio pour mettre et recevoir des appels. L'nergie de RF est une forme d'nergie lectromagntique. Ce type d'nergie se prsente sous d'autres formes, notamment la lumire solaire et les rayons X. Il ne faut cependant pas confondre l'nergie de RF avec d'autres formes d'nergie lectromagntique qui, lorsqu'elles sont mal utilises, peuvent occasionner des dommages biologiques. Des niveaux trs levs de rayons X, par exemple, peuvent endommager les tissus et le matriel gntique. Des spcialistes dans les domaines des sciences, de l'ingnierie, de la mdecine, de la sant et de l'industrie travaillent avec diffrentes organisations l'laboration de normes relatives l'exposition scuritaire l'nergie de RF. Ces normes fournissent les niveaux recommands d'exposition aux RF, tant pour les travailleurs que pour le public en gnral. Ces niveaux recommands d'exposition aux RF comprennent des coefficients de scurit apprciables. Toutes les radios bidirectionnelles Motorola sont conues, fabriques et testes de manire garantir leur conformit aux niveaux d'exposition aux radiofrquences tablis par les autorits publiques comptentes. Par ailleurs, les fabricants recommandent aux utilisateurs de radios bidirectionnelles de suivre des directives de fonctionnement spcifiques. Ces directives sont importantes puisqu'elles informent les utilisateurs sur l'exposition l'nergie de RF et proposent des moyens simples pour la contrler. Franais canadien 30 6881095C98-K_SafetyP.book Page 31 Tuesday, September 3, 2013 3:56 PM Visitez les sites Web suivants pour obtenir plus de renseignements sur ce qu'est l'nergie de RF et sur les moyens de contrle prendre afin de respecter les limites tablies en matire d'exposition aux radiofrquences. http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/fr/
www.motorolasolutions.com/rfhealth Rglements de la Commission fdrale amricaine des communications (FCC) Lorsque les radios bidirectionnelles sont utilises des fins professionnelles, la FCC exige que les utilisateurs soient pleinement conscients des effets de l'exposition et qu'ils soient capables de contrler le niveau d'exposition auquel ils se soumettent afin de rpondre aux exigences de leur profession. Vous pouvez contribuer la sensibilisation des utilisateurs l'exposition aux radiofrquences en apposant des tiquettes de produit leur offrant une rfrence vers la source d'information approprie. Votre radio bidirectionnelle Motorola comporte une tiquette de produit sur l'exposition aux radiofrquences. D'autre part, vous trouverez dans le manuel de l'utilisateur du produit Motorola ou dans la brochure de scurit fournie sparment les informations requises et le mode d'emploi permettant de contrler l'exposition l'nergie de RF et de garantir le respect des normes. Conformit aux normes sur l'exposition aux radiofrquences Cette radio bidirectionnelle Motorola a t conue et teste afin de garantir sa conformit aux normes et recommandations nationales et internationales ci-dessous lies l'exposition des tres humains l'nergie lectromagntique de radiofrquence. Cette radio respecte les limites d'exposition tablies par l'IEEE (FCC) et l'ICNIRP pour les environnements professionnels ou avec contrle d'exposition aux radiofrquences, des cycles d'utilisation allant jusqu' 50 % mission 50 % rception et est approuve pour un usage professionnel seulement. En ce qui concerne la mesure de l'nergie de RF afin d'valuer la conformit ces normes d'exposition, la radio met de l'nergie de RF mesurable seulement lorsqu'elle est en mode mission (lorsque l'utilisateur parle), et non pas lorsqu'elle est en mode rception (lorsque l'utilisateur coute) ni en mode Attente. 31 Franais canadien 6881095C98-K_SafetyP.book Page 32 Tuesday, September 3, 2013 3:56 PM REMARQUE : Les batteries approuves, fournies avec cette radio, sont cotes en fonction d'un cycle d'utilisation de 5-5-90 (5% mission5 % rception 90 % attente), mme si la radio respecte les limites d'exposition tablies par la FCC pour l'usage professionnel et peut fonctionner selon des cycles d'utilisation allant jusqu' 50 % mission. Cette radio bidirectionnelle Motorola est conforme aux normes et aux lignes directrices suivantes relatives l'exposition l'nergie de RF :
Commission fdrale amricaine des communications (FCC), Code of Federal Regulations (code de la rglementation fdrale); FCC 47 partie CFR et suiv. FCC, OET Bulletin 65 Institute of Electrical and Electronic Engineers (IEEE) C95.1 Commission internationale de protection contre les rayonnements non ionisants
(ICNIRP) Code de scurit 6 du Ministre de la Sant (Canada) et norme CNR-102 d'Industrie Canada Norme de l'Australian Communications Authority Radiocommunications et suiv. ANATEL ANNEXE la Rsolution N 303 et suiv. Directives de conformit et de contrle de l'exposition aux RF et directives de fonctionnement pour la communication bidirectionnelle Pour contrler votre exposition et garantir le respect des limites d'exposition en milieu professionnel ou contrl, observez toujours les consignes suivantes. NE dcollez PAS l'tiquette sur l'exposition l'nergie de RF du dispositif. Lorsque l'appareil est cd d'autres utilisateurs, il doit tre accompagn des informations de sensibilisation des utilisateurs. Franais canadien 32 6881095C98-K_SafetyP.book Page 33 Tuesday, September 3, 2013 3:56 PM Communication bidirectionnelle Transmission ne dpassant pas le facteur nominal de 50 % du temps. Pour transmettre (parler), appuyez sur le bouton de transmission (PTT). Pour recevoir les appels, relchez le bouton de transmission. Le bouton PTT peut se trouver sur la radio elle-mme ou sur un accessoire avec ou sans fil approuv (par exemple, un bouton de transmission Bluetooth distant). Il est important de ne pas mettre plus de 50 % du temps tant donn que cette radio gnre une nergie de RF dont l'exposition n'est mesurable que lors de l'mission (en termes de conformit aux normes de mesure). Devant le visage. Tenez la radio la verticale, en maintenant une distance d'au moins 2,5 centimtres (1 pouce) entre le micro (et les autres parties de la radio, y compris l'antenne) et le nez ou les lvres. Garder la radio une distance approprie est important afin de garantir le respect des limites. REMARQUE : L'exposition aux radiofrquences diminue quand la distance de l'antenne augmente. Utilisation lorsque la radio est porte sur soi. Lorsque la radio est porte sur soi, utilisez toujours une pince ou une attache de ceinture, placez-la dans un tui ou dans un harnais pour le corps approuv par Motorola pour ce produit. Il est important d'utiliser des accessoires ajusts au corps qui sont approuvs, car dans le cas contraire, l'utilisateur risque de s'exposer des niveaux d'nergie de RF suprieurs aux limites tablies pour les environnements professionnels ou exposition contrle. N'utilisez que des antennes, des batteries et des accessoires audio fournis ou de remplacement approuvs par Motorola. L'utilisation d'antennes, batteries et accessoires avec ou sans fil non approuvs par Motorola pourrait excder les directives d'exposition aux RF applicables (IEEE, ICNIRP ou FCC). Pour une liste des accessoires approuvs par Motorola pour votre modle de radio, visitez le site Web suivant :
http://www.motorolasolutions.com/governmentandenterprise 33 Franais canadien 6881095C98-K_SafetyP.book Page 34 Tuesday, September 3, 2013 3:56 PM Interfrence/compatibilit lectromagntique REMARQUE : La grande majorit des dispositifs lectroniques sont sensibles l'effet lectromagntique perturbateur (EMI) s'ils ne sont pas convenablement protgs ou s'ils ne sont pas conus ou configurs de telle sorte qu'ils soient compatibles avec ce type de signaux lectromagntiques. Btiments Afin d'viter des problmes d'interfrence et/ou de compatibilit lectromagntique, teignez la radio lorsque cette consigne est affiche sur un panneau. Il se peut, par exemple, que les hpitaux ou les tablissements de sant utilisent des appareils sensibles l'nergie de RF externe. Aronefs bord d'un avion, teignez la radio lorsque l'quipage vous le demande. Toute utilisation de la radio doit se faire conformment aux rglements en vigueur de la compagnie arienne et sur instructions de l'quipage. Appareils mdicaux Stimulateurs cardiaques, dfibrillateurs ou autres appareils mdicaux implants Les personnes portant un stimulateur cardiaque, un dfibrillateur implantable ou autre appareil mdical actif implant doivent :
Consulter leur mdecin au sujet des risques potentiels d'interfrences que prsentent les metteurs radiofrquences, tels que les radios portables (les appareils mdicaux faiblement blinds sont plus vulnrables aux interfrences). teindre la radio immdiatement si elles ont des raisons de penser qu'il existe une interfrence quelconque. Franais canadien 34 6881095C98-K_SafetyP.book Page 35 Tuesday, September 3, 2013 3:56 PM Ne pas transporter la radio dans une poche de poitrine ou proximit du site d'implantation de l'appareil mdical, et utiliser la radio du ct oppos celui o se trouve l'appareil afin de minimiser le potentiel d'interfrence. Prothses auditives Certaines radios numriques sans fil peuvent interfrer avec certains types d'aides auditives. Si tel est le cas, veuillez consulter le fabricant de la prothse auditive pour discuter d'autres solutions possibles. Autres dispositifs mdicaux Si vous utilisez tout autre dispositif mdical personnel, consultez le fabricant du dispositif afin de dterminer s'il est convenablement protg contre l'nergie de RF externe. Votre mdecin peut vous aider obtenir ces renseignements. Utilisation de dispositifs de communication pendant la conduite d'un vhicule Vrifiez toujours les lois et rglements relis l'utilisation des radios dans les rgions o vous conduisez. Concentrez-vous entirement sur votre conduite et sur la route. Utilisez le mode mains libres, s'il est disponible. Rangez-vous sur l'accotement avant de faire un appel ou d'y rpondre si les conditions de conduite sont particulirement mauvaises ou si les lois et rglements l'exigent. 35 Franais canadien 6881095C98-K_SafetyP.book Page 36 Tuesday, September 3, 2013 3:56 PM Protection de l'oue Une exposition des bruits forts en provenance de n'importe quelle source pendant de longues priodes de temps pourrait affecter votre audition de manire temporaire ou permanente. Plus le volume sonore de la radio est lev, plus votre audition peut se dtriorer rapidement. Des dommages auditifs dus l'exposition des bruits forts peuvent d'abord tre indtectables, mais ceux-ci ont parfois des effets cumulatifs. Pour protger votre audition :
Rglez le volume le plus bas possible pour effectuer votre travail. Montez le volume seulement si vous vous trouvez dans un environnement bruyant. Baissez le volume avant d'ajouter un casque ou une oreillette. Limitez la priode de temps d'utilisation de casques ou d'couteurs volume lev. Lorsque vous utilisez la radio sans casque ni couteur, ne placez pas le haut-parleur directement sur votre oreille. Avertissements de fonctionnement AVERTISSEMENT Pour les vhicules quips de coussins gonflables :
Consultez le manuel du fabricant du vhicule avant d'installer un appareil lectronique, afin d'viter toute interfrence avec le cblage des coussins gonflables. NE placez PAS de radio portative dans la zone situe au-dessus d'un coussin gonflable ou dans la zone de dploiement de ce dernier. Un coussin gonflable de scurit se dploie avec beaucoup de force. Si une radio portative se trouve dans la zone de dploiement du coussin lorsque celui-ci se gonfle, la radio peut tre propulse avec une force considrable et risque alors d'occasionner de graves lsions corporelles aux passagers du vhicule. Franais canadien 36 6881095C98-K_SafetyP.book Page 37 Tuesday, September 3, 2013 3:56 PM Avertissements de fonctionnement (suite) AVERTISSEMENT Atmosphres potentiellement explosives
(Les atmosphres explosives sont des endroits classifis comme dangereux, pouvant contenir des vapeurs, des poudres ou des gaz dangereux.) teignez la radio avant d'entrer dans un milieu avec une atmosphre potentiellement explosive, sauf s'il s'agit d'une radio portative de type scurit intrinsque spcialement conue pour l'utilisation dans un tel milieu (par exemple, s'il s'agit d'une radio homologue par Factory Mutual, CSA, UL ou CENELEC). VITEZ d'enlever, de remplacer ou de recharger les batteries dans un tel milieu. Les tincelles dans des atmosphres potentiellement explosives peuvent provoquer une explosion ou un incendie et entraner des lsions corporelles, voire la mort. Parmi les zones potentiellement explosives mentionnes plus haut, citons les zones de ravitaillement en carburant, par exemple la cale des bateaux, les installations de transfert et de stockage de carburant ou de produits chimiques et les zones dans lesquelles l'air est charg en produits chimiques ou en particules telles que de la poudre de crales, de la poussire ou des poudres mtalliques. Les zones atmosphres potentiellement explosives affichent gnralement des panneaux de mise en garde, mais ce n'est pas toujours le cas. Zone de dynamitage et de dtonateurs teignez la radio lorsque vous vous trouvez proximit de dtonateurs lectriques ou dans une zone de dynamitage afin d'viter de dclencher une explosion, ou lorsque vous vous trouvez dans un endroit o il est indiqu : teindre les radios bidirectionnelles . Respectez tous les panneaux et toutes les consignes. 37 Franais canadien 6881095C98-K_SafetyP.book Page 38 Tuesday, September 3, 2013 3:56 PM Prcautions relatives au fonctionnement Prcaution Antennes N'utilisez PAS une radio portative, quelle qu'elle soit, dont l'antenne est endommage. Si une antenne endommage entre en contact avec votre peau, il peut en rsulter une brlure lgre. Batteries Toutes les batteries peuvent provoquer des dommages, des blessures ou des brlures si un objet conducteur, par exemple un bijou, une cl ou les mailles d'une chane, entre en contact avec les bornes de la batterie. Le matriel conducteur risque de fermer un circuit lectrique (court-circuit) et de devenir trs chaud. Manipulez avec prcaution les batteries charges, en particulier lorsqu'elles sont places dans une poche, un sac main ou tout autre endroit contenant des objets mtalliques. Informations sur les radios scurit intrinsque dans les endroits dangereux L'homologation titre de produit scurit intrinsque indique qu'un produit a t reconnu intrinsquement scuritaire par un service d'homologation (par exemple, FM Approvals, CSA, UL ou Cenelec) et certifie qu'un produit particulier rpond aux normes applicables du service d'homologation en matire de scurit pour certains types particuliers de milieux dangereux classifis. Toute radio portative ayant t agre de scurit intrinsque doit porter l'tiquette d'homologation correspondante qui l'identifie comme tant agre pour un usage dans des atmosphres dangereuses spcifies. L'tiquette spcifie la catgorie de risque laquelle correspond la batterie (Classe/Division/Groupe), ainsi que le numro de rfrence de la batterie qui doit tre utilis. L'tiquette d'homologation d'un dispositif de scurit intrinsque doit tre appose sur l'unit de radio portative. Franais canadien 38 6881095C98-K_SafetyP.book Page 39 Tuesday, September 3, 2013 3:56 PM Prcautions relatives au fonctionnement de l'quipement de scurit intrinsque Prcaution NE PAS faire fonctionner d'appareil de communication radio dans une atmosphre dangereuse moins qu'il ne soit d'un type appropri
(par exemple, homologu par FM, UL, CSA ou CENELEC). Vous risquez de provoquer une explosion ou un incendie. NE PAS faire fonctionner une radio scurit intrinsque homologue dans une atmosphre dangereuse si la radio est endommage (par exemple, si son botier est fendu). Vous risquez de provoquer une explosion ou un incendie. NE PAS remplacer NI charger des batteries dans une atmosphre dangereuse. La production d'tincelles lors de l'installation ou du retrait des batteries prsente un risque d'incendie ou d'explosion. Avertissements concernant les radios agres de scurit intrinsque Les radios doivent offrir la possibilit d'utilisation dans une atmosphre dangereuse et porter l'tiquette d'homologation titre d'appareil scurit intrinsque avant d'tre expdies de l'usine de fabrication de Motorola. Les radios ne pourront tre mises niveau afin d'offrir cette caractristique ni tre tiquetes comme telles une fois expdies et achemines sur le terrain. Toute modification change la configuration du modle d'origine des composants de l'unit. Les modifications ne peuvent tre effectues que par le fabricant du produit d'origine. 39 Franais canadien 6881095C98-K_SafetyP.book Page 40 Tuesday, September 3, 2013 3:56 PM VITEZ de remplacer ou de changer des accessoires dans une atmosphre dangereuse. Des tincelles peuvent se produire lors de l'installation ou du retrait des accessoires et provoquer un incendie ou une explosion. teignez la radio avant d'enlever ou d'installer une batterie ou un AVERTISSEMENT accessoire. NE PAS dsassembler un produit scurit intrinsque de manire exposer les circuits internes de l'unit. Le fait de ne pas utiliser une batterie scurit intrinsque homologue ou des accessoires approuvs spcialement conus pour le modle de radio utilis peut crer une dangereuse situation de risque cause par l'utilisation d'un ensemble radio non approuv dans un endroit dangereux. Toute modification incorrecte ou non agre du produit agr de scurit intrinsque annulera la classification de ce dernier. La rparation incorrecte ou le nouvel tiquetage de toute radio scurit intrinsque homologue par un service d'homologation risque d'annuler la classe d'homologation de l'unit. L'utilisation d'une radio autre qu'une radio scurit intrinsque dans une atmosphre dangereuse est susceptible d'entraner des blessures graves ou la mort. Rparation AVERTISSEMENT IL INCOMBE L'UTILISATEUR DE FAIRE FAIRE LES RPARATIONS NCESSAIRES AUX PRODUITS MOTOROLA SCURIT INTRINSQUE HOMOLOGUS. La rparation d'une radio Motorola agre par la FMRC doit tre exclusivement effectue dans des locaux superviss par la FMRC rpondant aux normes d'homologation FMRC numro de classe 3605 relatives au service et la rparation. Contactez Motorola afin d'obtenir une assistance pour le service et la rparation d'units Motorola scurit intrinsque. Franais canadien 40 6881095C98-K_SafetyP.book Page 41 Tuesday, September 3, 2013 3:56 PM Le terme rparation dsigne tout travail effectu sur les composants internes de l'unit afin de ramener celle-ci son tat d'origine. Un travail qui ne ncessite pas l'ouverture du botier de l'unit afin d'en exposer les circuits lectriques internes ne constitue pas une rparation. vitez d'interchanger des options ou des accessoires. L'quipement de communications Motorola certifi de scurit intrinsque par l'entit d'homologation (FMRC, UL, CSA, CENELEC) est test en tant que systme complet, savoir : la radio portative, la batterie, les accessoires et les options, tous agrs par l'entit correspondante. L'intgrit de cette configuration forme d'une radio portative et d'une batterie agres doit tre strictement respecte. Aucune substitution d'lment n'est permise, mme si l'lment de remplacement a pralablement t agr pour une autre unit de communication Motorola. Les configurations agres peuvent tre consultes dans la liste mise disposition par l'entit d'homologation (FMRC, UL, CSA, CENELEC). L'tiquette d'homologation de scurit intrinsque appose sur la radio identifie la classification de scurit intrinsque de cette radio ainsi que les batteries agres qui peuvent tre utilises avec ce systme. Le numro de rfrence du manuel mentionn sur l'tiquette d'homologation de scurit intrinsque identifie les accessoires et/ou les options agrs qui peuvent tre utiliss avec cette unit de radio portative. Le fait de ne pas utiliser une batterie ou un accessoire Motorola de scurit intrinsque avec l'unit de radio Motorola agre annule l'homologation de scurit intrinsque de cette unit de radio. 41 Franais canadien 6881095C98-K_SafetyP.book Page 42 Tuesday, September 3, 2013 3:56 PM Remarques :
Franais canadien 42 6881095C98-K_SafetyP.book Page 43 Tuesday, September 3, 2013 3:56 PM GUA DE EXPOSICIN DE ENERGA DE RADIOFRECUENCIA Y SEGURIDAD DEL PRODUCTO PARA RADIOS BIDIRECCIONALES PORTTILES ATENCIN!
Antes de usar este radio, lea esta gua que contiene instrucciones de funcionamiento importantes para un uso seguro del dispositivo e instrucciones para tomar conciencia y controlar la energa de radiofrecuencia para cumplir con las normas y regulaciones correspondientes. MOTOROLA, MOTO, MOTOROLA SOLUTIONS y el logotipo de la M estilizada son marcas comerciales o marcas comerciales registradas de Motorola Trademark Holdings, LLC y se utilizan bajo licencia. Todas las dems marcas comerciales pertenecen a sus respectivos dueos. 2007 2013 Motorola Solutions, Inc. Todos los derechos reservados. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, EE.UU.
*NNTN7223F*
NNTN7223G 6881095C98-K Espaol Latinoamericano 6881095C98-K_SafetyP.book Page 44 Tuesday, September 3, 2013 3:56 PM Informacin para tomar conciencia y controlar la exposicin a la energa de RF e instrucciones de funcionamiento para uso profesional AVISO: Este radio est diseado para usarse en condiciones controladas o profesionales, donde los usuarios tengan pleno conocimiento de su exposicin y puedan controlar su exposicin para cumplir con los lmites profesionales de la FCC y de los estndares internacionales. Este dispositivo de radio NO est autorizado para el uso particular de la poblacin en general. El radio bidireccional utiliza energa electromagntica en el espectro de la frecuencia de radio (RF) para lograr la comunicacin a distancia entre dos o ms usuarios. Emplea energa de radiofrecuencia (RF) u ondas de radio para enviar y recibir llamadas. La energa de RF es una forma de energa electromagntica. Otras formas incluyen, por ejemplo, la luz solar y los rayos X. Sin embargo, no debe confundirse la energa de RF con otras formas de energa electromagntica que, al usarse de manera incorrecta, pueden producir daos biolgicos. Los niveles muy elevados de rayos X, por ejemplo, pueden daar los tejidos y el material gentico. Expertos en ciencias, ingeniera, medicina, salud e industria trabajan con ciertas organizaciones para desarrollar estndares para una exposicin segura a la energa de RF. Estos estndares indican los niveles recomendados de exposicin a radiofrecuencia, tanto para los trabajadores como para el pblico en general. Estos niveles de exposicin a radiofrecuencia incluyen mrgenes de proteccin bastante amplios. Todos los radios bidireccionales de Motorola han sido diseados, fabricados y probados para garantizar que cumplan con los niveles de exposicin a radiofrecuencia establecidos por el gobierno. Adems, los fabricantes recomiendan instrucciones de funcionamiento especficas para los usuarios de radios bidireccionales. Estas instrucciones son relevantes, ya que informan al usuario acerca de la exposicin a la energa de RF y ofrecen procedimientos sencillos para controlar dicha energa. Espaol Latinoamericano 44 6881095C98-K_SafetyP.book Page 45 Tuesday, September 3, 2013 3:56 PM Consulte los siguientes sitios web para obtener informacin adicional acerca de la exposicin a la energa de RF y de cmo controlarla para garantizar el cumplimiento de los lmites de exposicin establecidos:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/
www.motorolasolutions.com/rfhealth Regulaciones de la Comisin Federal de Comunicaciones (FCC) Cuando los radios bidireccionales se usan para trabajar, la FCC indica que los usuarios deben conocer su nivel de exposicin y tener la capacidad de controlarla, a fin de cumplir los requisitos de uso profesional. El conocimiento del nivel de exposicin puede proporcionarse mediante el uso de una etiqueta de producto que muestre al usuario informacin de conocimiento especfica para los usuarios. El radio bidireccional de Motorola tiene una etiqueta de producto de exposicin a RF. Asimismo, el manual de usuario de Motorola y el folleto de seguridad que viene aparte incluyen la informacin y las directrices de funcionamiento necesarias para controlar la exposicin de RF y cumplir con los requisitos. Cumplimiento de los estndares de exposicin a RF El radio bidireccional de Motorola est diseado y probado de manera tal que cumple con varios estndares y lineamientos nacionales e internacionales
(enumerados ms adelante) en materia de exposicin humana a la energa electromagntica de radiofrecuencia. Este radio cumple con los lmites de exposicin del IEEE (FCC) y de la ICNIRP para ambientes controlados o de uso profesional con exposicin a radiofrecuencia con factores de funcionamiento de hasta un 50 % de habla y 50 % de escucha, y ha sido aprobado para uso profesional. En cuanto a la medicin de la energa de RF para el cumplimiento de estos lineamientos de exposicin, el radio genera energa de RF que puede medirse, solamente mientras realiza una transmisin (cuando el usuario habla), no al efectuar la recepcin (escucha) ni en modo de espera. 45 Espaol Latinoamericano 6881095C98-K_SafetyP.book Page 46 Tuesday, September 3, 2013 3:56 PM NOTA: Las bateras aprobadas que se entregan con el radio estn clasificadas para un factor de funcionamiento de 5-5-90 (5 % de habla, 5 % de escucha y 90 % en espera) a pesar de que el radio cumpla con los lmites de exposicin en uso profesional de la FCC y pueden funcionar con factores de funcionamiento de hasta un 50 % de habla. El radio bidireccional de Motorola cumple con los siguientes lineamientos y estndares de exposicin a energa de RF:
Comisin Federal de Comunicaciones (FCC, Federal Communications Commission) de los Estados Unidos, Cdigo de Regulaciones Federales;
CFR 47 y ss. FCC, Boletn de OET 65 Instituto de Ingenieros Elctricos y Electrnicos (IEEE, Institute of Electrical and Electronics Engineers) C95.1 Comisin Internacional contra las Radiaciones No Ionizantes (ICNIRP, International Commission of Non-Ionizing Radiation Protection) Cdigo de seguridad 6 del Ministerio de Salud (Canad) y RSS-102 del Ministerio de Industria de Canad Estndar de radiocomunicaciones de la entidad de comunicaciones australiana y ss. ANATEL, Anexo a Resolucin No. 303 y ss. Cumplimiento de exposicin a radiofrecuencia (RF) y lineamientos de control e instrucciones de funcionamiento para radios bidireccionales Para controlar su nivel de exposicin y garantizar el cumplimiento de los lmites de exposicin a ambientes controlados o de uso profesional, siga siempre los procedimientos siguientes. NO retire la etiqueta de exposicin a radiofrecuencia del dispositivo. Los lineamientos referentes al uso seguro por parte del usuario deberan entregarse junto con el dispositivo cuando se transfiera a otros usuarios. Espaol Latinoamericano 46 6881095C98-K_SafetyP.book Page 47 Tuesday, September 3, 2013 3:56 PM Funcionamiento del radio bidireccional No transmita ms all del factor de funcionamiento normal del 50 % del tiempo. Para transmitir (hablar), presione el botn PTT (push to talk). Para recibir llamadas, suelte el botn PTT. El botn PTT puede estar en el radio o puede encontrarse en los accesorios con cable o inalmbricos aprobados (por ejemplo, un botn PTT remoto con Bluetooth). La transmisin del 50 % del tiempo, o menos, es importante, porque este radio genera una exposicin a la energa de radiofrecuencia que solamente se puede medir durante la transmisin (en trminos de medicin para el cumplimiento de los estndares). Al frente de la cara. Sostenga el radio en posicin vertical frente a la cara con el micrfono (y las dems partes del radio, incluida la antena) al menos a 2,5 cm (1 pulg.) de distancia de la nariz o los labios. Mantener el radio a una distancia adecuada es importante para garantizar el cumplimiento. NOTA: La exposicin a las radiofrecuencias disminuye al aumentar la distancia con la antena. Funcionamiento del equipo ajustado al cuerpo. Siempre que use el radio ajustado al cuerpo, pngalo en un clip, un soporte, un estuche, una funda o un arns para el cuerpo aprobado por Motorola para el producto. El uso de accesorios para llevar el equipo en el cuerpo es importante, porque el uso de accesorios que no estn aprobados por Motorola puede causar que nivel de exposicin supere los lmites de exposicin a radiofrecuencia en ambientes profesionales/controlados. Use nicamente las antenas de repuesto suministradas o aprobadas por Motorola. El uso de antenas, bateras y accesorios con cable o inalmbricos no autorizados por Motorola puede exceder los lineamientos sobre la exposicin a radiofrecuencia aplicables (IEEE, ICNIRP o FCC). Para obtener una lista de las antenas, bateras y otros accesorios aprobados por Motorola para el modelo de radio, visite el siguiente sitio web:
http://www.motorolasolutions.com/governmentandenterprise 47 Espaol Latinoamericano 6881095C98-K_SafetyP.book Page 48 Tuesday, September 3, 2013 3:56 PM Interferencia/compatibilidad electromagnticas NOTA: Casi todos los dispositivos electrnicos son susceptibles a las interferencias electromagnticas (EMI) si no cuentan con la debida proteccin o si no estn diseados o configurados de manera que sean compatibles con este tipo de seales electromagnticas. Instalaciones Para evitar conflictos de interferencias o de compatibilidad electromagntica, apague el radio en todo sitio donde haya letreros que as lo indiquen. Los hospitales y establecimientos de atencin mdica podran estar usando equipos sensibles a la energa de RF externa. Aviones Cuando est a bordo de un avin, apague el radio cuando se le indique. Si usa el radio, deber hacerlo de conformidad con las regulaciones de la lnea area y las instrucciones de la tripulacin. Dispositivos mdicos Marcapasos, desfibriladores u otros dispositivos mdicos implantados Las personas con marcapasos, desfibriladores cardioversores implantables (ICD) u otros dispositivos mdicos implantados activos (AIMD) debern:
Consultar con su mdico sobre el riesgo potencial de interferencias de frecuencia de radio transmisores tales como radios porttiles (los dispositivos mdicos con mala proteccin pueden ser ms susceptibles a las interferencias). Apagar el radio inmediatamente, si cree que existe alguna razn para sospechar que se est generando interferencia. Espaol Latinoamericano 48 6881095C98-K_SafetyP.book Page 49 Tuesday, September 3, 2013 3:56 PM No usar el radio en un bolsillo de la camisa o cerca del lugar del implante, y guardar o utilizar el radio en el lado opuesto del cuerpo del dispositivo implantado para minimizar la posibilidad de interferencias. Aparatos auditivos Algunos radios inalmbricos digitales pueden interferir con ciertos aparatos auditivos. En caso de que existan interferencias, puede consultar con el fabricante del aparato auditivo para buscar posibles alternativas. Otros dispositivos mdicos Si utiliza cualquier otro dispositivo mdico, consulte con el fabricante del dispositivo para determinar si est protegido adecuadamente contra la energa de RF externa. Su mdico podra ayudarlo a obtener esta informacin. Uso de dispositivos de comunicacin mientras se conduce Consulte siempre las leyes y los reglamentos para el uso de radios en las zonas donde conduce. Preste toda su atencin a la conduccin y al camino. Use la funcin de manos libres, si est disponible. Salga del camino y estacinese antes de realizar o contestar una llamada, si las condiciones de manejo o los reglamentos relacionados as lo exigen. 49 Espaol Latinoamericano 6881095C98-K_SafetyP.book Page 50 Tuesday, September 3, 2013 3:56 PM Seguridad acstica La exposicin a ruidos fuertes de cualquier fuente durante perodos prolongados podra afectar la audicin de manera temporal o permanente. Cuanto ms alto sea el volumen del radio, menos tardar la audicin en verse afectada. En ocasiones, el dao a la audicin provocado por ruidos fuertes es indetectable en un principio y puede tener efecto acumulativo. Para proteger la audicin:
Use el volumen ms bajo necesario para hacer su trabajo. Aumente el volumen solo si se encuentra en un ambiente ruidoso. Reduzca el volumen antes de conectar el audfono o auricular. Limite el tiempo durante el cual usa los auriculares o los audfonos a volumen alto. Al usar el radio sin audfono o auricular, no ponga el altavoz del radio directamente en la oreja. Advertencias sobre el funcionamiento ADVERTENCIA Para vehculos provistos de bolsa de aire (air bag):
Consulte el manual del fabricante del vehculo antes de instalar equipos electrnicos, a fin de evitar la interferencia con el cableado de las bolsas de aire. NO ponga el radio porttil sobre el rea de la bolsa de aire ni sobre la zona de despliegue de esta. Las bolsas de aire se inflan con gran fuerza. Si se pone un radio en la zona de despliegue de la bolsa de aire y esta se infla, es posible que el radio salga disparado con gran fuerza y cause lesiones graves a los ocupantes del vehculo. Espaol Latinoamericano 50 6881095C98-K_SafetyP.book Page 51 Tuesday, September 3, 2013 3:56 PM Advertencias sobre el funcionamiento (continuacin) ADVERTENCIA Atmsferas potencialmente explosivas
(El trmino atmsferas explosivas se refiere a lugares clasificados como peligrosos que pueden contener gases, vapores o polvos peligrosos). Apague el radio antes de ingresar a un rea con una atmsfera potencialmente explosiva, a menos que el tipo de radio haya sido clasificado especficamente para el uso en tales reas como Intrnsecamente seguro (por ejemplo, aprobado por Factory Mutual, CSA, UL o CENELEC). NO retire, instale ni cargue bateras en estas reas. Las chispas en ambientes potencialmente explosivos pueden desencadenar una explosin o un incendio, y ocasionar lesiones o incluso la muerte. Entre los ambientes potencialmente explosivos mencionados anteriormente, se encuentran las reas con combustible, por ejemplo, debajo de la cubierta de barcos; instalaciones de transferencia y almacenamiento de combustible y productos qumicos; reas donde el aire contiene productos qumicos o partculas tales como granos, polvos o polvos metlicos. En las reas con atmsferas potencialmente explosivas hay generalmente seales de precaucin, aunque no siempre es as. Detonadores y reas de explosivos Para evitar posibles interferencias con operaciones de voladuras, apague el radio cuando se encuentre cerca de los detonadores, en un rea de explosivos o en reas donde se encuentre el siguiente aviso: Apague la radio bidireccional. Respete todos los carteles e instrucciones. 51 Espaol Latinoamericano 6881095C98-K_SafetyP.book Page 52 Tuesday, September 3, 2013 3:56 PM Precauciones sobre el funcionamiento Precaucin Antenas NO use ningn radio porttil que tenga la antena daada. Si una antena daada toca la piel, puede causar una pequea quemadura. Bateras Todas las bateras pueden causar daos materiales, lesiones o quemaduras si un material conductor, por ejemplo, joyas, llaves o cadenas, hace contacto con los terminales expuestos. El material conductor podra cerrar un circuito elctrico (cortocircuito) y tornarse muy caliente. Manipule con cuidado las bateras cargadas, especialmente cuando las lleve dentro de un bolsillo, bolso o en algn otro contenedor con objetos metlicos. Informacin del radio (intrnsicamente) seguro para ubicaciones peligrosas La unidad con aprobacin de intrnsecamente seguro hace referencia a un producto que ha sido aprobado como intrnsecamente seguro por parte de un organismo de aprobacin (por ejemplo, FM Approvals, CSA, UL o Cenelec) y certifica que un producto determinado cumple con los estndares de intrnsecamente seguro correspondientes de dicho organismo para tipos especficos de lugares clasificados como peligrosos. Los radios porttiles que han recibido aprobacin de intrnsecamente seguros tendrn una etiqueta de aprobacin adherida para identificar la unidad como aprobada para determinadas atmsferas peligrosas. Esta etiqueta especifica la clase, la divisin o el grupo de peligro junto con el nmero de pieza de la batera que se debe usar. La etiqueta de aprobacin de intrnsecamente seguro se encontrar sobre la unidad de radio porttil. Espaol Latinoamericano 52 6881095C98-K_SafetyP.book Page 53 Tuesday, September 3, 2013 3:56 PM Precauciones de funcionamiento para equipos intrnsecamente seguros Precaucin NO haga funcionar el equipo para comunicaciones de radio en atmsferas peligrosas, a menos que se trate de un tipo especialmente calificado (por ejemplo, aprobado por FM, UL, CSA o CENELEC). Podra producirse un incendio o una explosin. NO haga funcionar una unidad de radio que haya sido aprobada como producto intrnsecamente seguro en atmsferas peligrosas si presenta daos fsicos (por ejemplo, si la cubierta est quebrada). Podra producirse un incendio o una explosin. NO reemplace ni cargue las bateras en una atmsfera peligrosa. Mientras se instalan o se quitan las bateras, pueden producirse chispas en el contacto que provoquen una explosin o un incendio. Advertencias para los radios aprobados como intrnsecamente seguros Los radios deben enviarse desde las instalaciones de fabricacin de Motorola con la capacidad para atmsferas peligrosas y con la etiqueta que indica que est aprobado como intrnsecamente seguro (FM, UL, CSA, CENELEC). Una vez que se hayan enviado los radios a terreno, no se actualizarn para alcanzar la capacidad ni se los etiquetar. Las modificaciones cambian la configuracin del diseo original del hardware de la unidad. Solo el fabricante del producto original puede realizar modificaciones. 53 Espaol Latinoamericano 6881095C98-K_SafetyP.book Page 54 Tuesday, September 3, 2013 3:56 PM ADVERTENCIA NO reemplace ni cambie los accesorios en una atmsfera peligrosa. Mientras se instalan o se quitan los accesorios, pueden producirse chispas en el contacto que provoquen una explosin o un incendio. Apague el radio antes de quitar o instalar una batera o un accesorio. NO desarme un producto intrnsecamente seguro de ninguna manera que exponga los circuitos internos de la unidad. Si no se usan bateras aprobadas como intrnsecamente seguras o accesorios aprobados especficamente para la unidad de radio, puede provocar una condicin de inseguridad peligrosa en la que se usa una combinacin de radio no aprobada para lugares peligrosos. La modificacin no autorizada o incorrecta de un producto aprobado como intrnsecamente seguro anular la calificacin de aprobacin del producto. La reparacin incorrecta o el cambio de etiqueta de cualquier radio aprobado por un organismo como dispositivo intrnsecamente seguro pueden afectar de manera negativa la calificacin de aprobacin de la unidad. El uso de un radio que no sea intrnsecamente seguro en una atmsfera peligrosa puede provocar lesiones graves o la muerte. Reparacin ADVERTENCIA LAS REPARACIONES DE LOS PRODUCTOS MOTOROLA INTRNSECAMENTE SEGUROS SON RESPONSABILIDAD DEL USUARIO. Las reparaciones de un producto de radio de Motorola aprobado por FM deben realizarse en instalaciones auditadas por FM de conformidad con el estndar de reparaciones y servicio 3605 de FM. Pngase en contacto con Motorola para solicitar asistencia relacionada con las reparaciones y las tareas de servicio de los equipos Motorola intrnsecamente seguros. Espaol Latinoamericano 54 6881095C98-K_SafetyP.book Page 55 Tuesday, September 3, 2013 3:56 PM Una reparacin consta de algo hecho en el interior de la unidad que debe devolverla a su estado original. Las instancias que no se consideran reparaciones son las que incluyen una accin realizada en una unidad que no requiere que la cubierta externa se abra de manera tal que queden expuestos los circuitos elctricos de la unidad. No sustituya los elementos opcionales ni accesorios Los equipos para comunicaciones Motorola que cuentan con un certificado de intrnsecamente seguros emitido por un organismo de aprobacin (FM, UL, CSA, CENELEC) son probados como sistemas completos que incluyen: el dispositivo porttil aprobado, la batera aprobada y los accesorios u opciones aprobados, o ambos. Debe respetar de manera estricta esta combinacin de dispositivo porttil y batera aprobados. No deben sustituirse los elementos, aun si la pieza de sustitucin ha sido aprobada con anterioridad para otro equipo de comunicaciones Motorola. Las configuraciones aprobadas son detalladas por el organismo de aprobacin (FM, UL, CSA, CENELEC). La etiqueta de aprobacin como intrnsecamente seguro adherida al radio indica la clasificacin de intrnsecamente seguro de ese radio e indica las bateras aprobadas que pueden usarse con el sistema. La etiqueta de aprobacin de intrnsecamente seguro adherida al radio hace referencia a un nmero de pieza manual que indica los accesorios o las opciones que han sido aprobados para su uso con el radio porttil. El uso de una batera o un accesorio aprobados como intrnsecamente seguros que no sean de Motorola con el radio Motorola aprobado anular la aprobacin de intrnsecamente seguro de esa unidad de radio. 55 Espaol Latinoamericano 6881095C98-K_SafetyP.book Page 56 Tuesday, September 3, 2013 3:56 PM NOTAS:
Espaol Latinoamericano 56
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-04-05 | 157.77 ~ 158.67 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Class II Permissive Change |
2 | 2018-01-05 | 157.77 ~ 158.67 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Class II permissive change or modification of presently authorized equipment |
3 | 2014-10-13 | 157.77 ~ 158.67 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2022-04-05
|
||||
1 2 3 |
2018-01-05
|
|||||
1 2 3 |
2014-10-13
|
|||||
1 2 3 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0003778479
|
||||
1 2 3 | Physical Address |
8000 West Sunrise Blvd
|
||||
1 2 3 |
Ft Lauderdale, FL
|
|||||
1 2 3 |
Ft Lauderdale, Florida 33322
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 2 3 |
j******@tuvam.com
|
|||||
1 2 3 |
j******@acstestlab.com
|
|||||
1 2 3 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
AZ4
|
||||
1 2 3 | Equipment Product Code |
89FT3835
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
D******** Z******
|
||||
1 2 3 | Title |
Regulatory Compliance Manager
|
||||
1 2 3 | Telephone Number |
95472********
|
||||
1 2 3 | Fax Number |
--********
|
||||
1 2 3 |
d******@motorolasolutions.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2-Way Portable Radio | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 | Class II permissive change or modification of presently authorized equipment | |||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power listed is rated conducted. Maximum conducted output power is 3.3 Watts (digital mode) and 2.4 Watts (analog mode), per 90.205(s). Minimum output setting is 1W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body-worn accessory exposure conditions are 0.19 W/kg and 0.56 W/kg, respectively. Class II Permissive Change: Replacing RF and Transmitter Pre-Driver devices. | ||||
1 2 3 | Power listed is rated conducted. Maximum conducted output power is 3.3 Watts per 90.205(s). Minimum output setting is 1W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Class II change to add new antennas as described in this filing. The highest reported SAR values for head and body-worn accessory exposure conditions are 0.47 W/kg and 0.14 W/kg, respectively. | |||||
1 2 3 | Power listed is rated conducted. Maximum conducted output power is 3.3 Watts per 90.205(s). Minimum output setting is 1W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body-worn accessory exposure conditions are 0.14 W/kg and 0.23 W/kg, respectively. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Motorola Penang Advanced Communication Laboratory
|
||||
1 2 3 |
Motorola Solutions Malaysia Sdn Bhd
|
|||||
1 2 3 | Name |
H****** H********
|
||||
1 2 3 |
S******** H****
|
|||||
1 2 3 | Telephone Number |
604-2********
|
||||
1 2 3 |
60485******** Extension:
|
|||||
1 2 3 | Fax Number |
604 6********
|
||||
1 2 3 |
604-6********
|
|||||
1 2 3 |
h******@motorolasolutions.com
|
|||||
1 2 3 |
c******@motorolasolutions.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 7K60FXD | |||||||||||||||||||||||||||||||||
1 | 2 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 7K60FXE | |||||||||||||||||||||||||||||||||
1 | 3 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 7K60F1D | |||||||||||||||||||||||||||||||||
1 | 4 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 7K60F1E | |||||||||||||||||||||||||||||||||
1 | 5 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 7K60F1W | |||||||||||||||||||||||||||||||||
1 | 6 | 9 | EF | 138 | 174 | 2 | 0.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 7 | 22 | 157.77 | 158.67 | 2 | 0.5 ppm | 16K0F3E | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 9 | EF ES | 138 | 174 | 3 | 0.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
2 | 2 | 9 | EF ES | 138 | 174 | 3 | 0.5 ppm | 7K60FXD | |||||||||||||||||||||||||||||||||
2 | 3 | 9 | EF ES | 138 | 174 | 3 | 0.5 ppm | 7K60FXE | |||||||||||||||||||||||||||||||||
2 | 4 | 9 | EF ES | 138 | 174 | 3 | 0.5 ppm | 7K60F1D | |||||||||||||||||||||||||||||||||
2 | 5 | 9 | EF ES | 138 | 174 | 3 | 0.5 ppm | 7K60F1E | |||||||||||||||||||||||||||||||||
2 | 6 | 90,90.210(e) | EF ES | 138 | 174 | 3 | 0.5 ppm | 7K60F1W | |||||||||||||||||||||||||||||||||
2 | 7 | 22 | 157.77 | 158.67 | 3 | 0.5 ppm | 16K0F3E | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
3 | 2 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 7K60FXD | |||||||||||||||||||||||||||||||||
3 | 3 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 7K60FXE | |||||||||||||||||||||||||||||||||
3 | 4 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 7K60F1D | |||||||||||||||||||||||||||||||||
3 | 5 | 9 | EF | 138 | 174 | 3 | 0.5 ppm | 7K60F1E | |||||||||||||||||||||||||||||||||
3 | 6 | 90,90.210(e) | EF | 138 | 174 | 3 | 0.5 ppm | 7K60F1W | |||||||||||||||||||||||||||||||||
3 | 7 | 22 | 157.77 | 158.67 | 3 | 0.5 ppm | 16K0F3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC