FCC ID: AZ489FT4969 2-Way Portable Radio

English 7.6 Scan Lists Scan lists are created and assigned to individual channels or groups. Your radio scans for voice activity by cycling through the channel or group sequence specified in the scan list for the current channel or group. Your radio can support up to 250 scan lists, with a maximum of 16 members in a list. Each scan list supports a mixture of both analog and digital entries. 7.7 Scan Your radio cycles through the programmed scan list for the current channel looking for voice activity when you start a scan. There are two ways of initiating scan:

Main Channel Scan (Manual) Your radio scans all the channels or groups in your scan list. On entering scan, your radio may, depending on the settings, automatically start on the last scanned active channel or group, or on the channel where scan was initiated. 50 Auto Scan (Automatic) Your radio automatically starts scanning when you select a channel or group that has Auto Scan enabled. 7.7.1 Turning Scan On or Off Follow the procedure to turn scan on or off on your radio. Do one of the following:

Press the programmed Scan button to start or stop Scan. Turn the Channel Selector Knob to select a channel programmed with a scan list. If scan is enabled:

The yellow LED blinks. A positive indicator tone sounds. If scan is disabled:

The LED turns off. A negative indicator tone sounds. English 7.7.2 Responding to Transmissions During Scanning During scanning, your radio stops on a channel or group where activity is detected. The radio stays on that channel for a programmed duration known as hang time. Follow the procedure to respond to transmissions during scanning. Deleting Nuisance Channels If a channel continually generates unwanted calls or noise,

(termed a "nuisance" channel), you can temporarily remove the unwanted channel from the scan list. This capability does not apply to the channel designated as the Selected Channel. Follow the procedure to delete nuisance channels on your radio. 1 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button during hang time. The green LED lights up. 1 When your radio locks on to an unwanted or nuisance channel, press the programmed Nuisance Channel Delete button until you hear a tone. 2 Release the programmed Nuisance Channel Delete button. The nuisance channel is deleted. 2 Release the PTT button to listen. The radio returns to scanning other channels or groups if you do not respond within the hang time. 7.7.4 Restoring Nuisance Channels 7.7.3 Follow the procedure to restore nuisance channels on your radio. Do one of the following:

Turn the radio off and then power it on again. 51 English Change the channel using the Channel Selector Knob. 7.8 Vote Scan Vote Scan provides you with wide area coverage in areas where there are multiple base stations transmitting identical information on different analog channels. Your radio scans analog channels of multiple base stations and performs a voting process to select the strongest received signal. Once that is established, your radio receives transmissions from that base station. During a vote scan, the yellow LED blinks. To respond to a transmission during a vote scan, see Responding to Transmissions During Scanning on page 51. 7.9 Call Indicator Settings This feature allows you to configure call or text message ringing tones. 52 7.9.1 Selecting a Ring Alert Type NOTE:

The programmed Ring Alert Type button is assigned by your dealer or system administrator. Check with your dealer or system administrator to determine how your radio has been programmed. You can program the radio calls to one predetermined vibrate call. The radio vibrates once if it is a momentary ring style. The radio vibrates repetitively if it is a repetitive ring style. When set to Ring and Vibrate, the radio sounds a specific ring tone if there is any incoming radio transaction (for example, Call Alert or Message). It sounds like a positive indicator tone or missed call. For radios with batteries that support the vibrate feature and are attached to a vibrating belt clip, the available Ring Alert Type options are Silent, Ring, Vibrate, and Ring and Vibrate. For radios with batteries that do not support the vibrate feature and are not attached to a vibrating belt clip, Ring Alert Type is automatically set to Ring. If you press the programmed Ring Alert Type button, a bad key tone sounds, indicating the multiple Ring Alert Type options are disabled. Configuring Vibrate Style English You can select a Ring Alert Type by performing the following action. Press the programmed Ring Alert Type button to toggle Voice Announcement or Text-to-Speech, and the radio behavior to the following options.

- For Silent, Voice Announcement or Text-to-

Speech sounds Ring Alert Type Silent only.

- For Ring Only, Voice Announcement or Text-to-

Speech sounds Ring Alert Type and the radio sounds a ring tone.

- For Vibrate Only, Voice Announcement or Text-

to-Speech sounds Ring Alert Type and the radio vibrates.

- For Ring and Vibrate, Voice Announcement or Text-to-Speech sounds Ring Alert Type and the radio sounds a ring tone and vibrates. 7.9.2 NOTE:

The programmed Vibrate Style button is assigned by your dealer or system administrator. Check with your dealer or system administrator to determine how your radio has been programmed. Vibrate Style is enabled when the Vibrating Belt Clip is attached to the radio with a battery that supports the vibrate feature. You can configure the vibrate style by performing the following action. Press the programmed Vibrate Style button to toggle to short, medium, or long option and the radio vibrates accordingly. Voice Announcement or Text-

to-Speech sounds Vibrate Style. 7.9.3 Alarm Tone Volume Escalation Your radio can be programmed by your dealer to continually alert you when a radio call remains unanswered. This is done by automatically increasing the alarm tone volume over time. This feature is known as Escalert. 53 English 7.10 Call Alert Operation Call Alert paging enables you to alert a specific radio user to call you back. This feature is accessible using a programmed One Touch Access button. 7.10.1 Responding to Call Alerts When you receive a Call Alert:

A repetitive tone sounds. The yellow LED blinks. Press the PTT button within 4 seconds of receiving a Call Alert page to respond with a Private Call. 7.10.2 Making Call Alerts Follow the procedure to make Call Alerts on your radio. 54 1 Press the programmed One Touch Access button. The green LED lights up. 2 Wait for acknowledgment. If the Call Alert acknowledgment is received, a positive indicator tone sounds. If the Call Alert acknowledgment is not received, a negative indicator tone sounds. 7.11 Mute Mode Mute Mode provides an option to silence all audio indicators on your radio. When Mute Mode is initiated, all audio indicators are muted except higher priority features such as emergency operations. When Mute Mode is exited, your radio resumes playing ongoing tones and audio transmissions. IMPORTANT:

You can only enable either Face Down or Man Down one at a time. Both features cannot be enabled together. 7.11.1 Turning On Mute Mode Follow the procedure to turn on Mute Mode. Access this feature by using the programmed Mute Mode button. The following occurs when Mute mode is enabled:

Positive Indicator Tone sounds. The red LED light starts blinking and remains blinking until Mute Mode is exited. Radio is muted. Mute Mode Timer begins counting down the duration that is configured. 7.11.2 English Exiting Mute Mode This feature can be exited automatically once the Mute Mode Timer expires. Do one of the following to exit Mute mode manually:

Press the programmed Mute Mode button. Press the PTT button on any entry. The following occurs when Mute mode is disabled:

Negative Indicator Tone sounds. The blinking red LED turns off. Your radio unmutes and speaker state is restored. If the timer has not expired, Mute mode timer is stopped. NOTE:

Mute Mode is also exited if the user transmits voice or switches to an unprogrammed channel. 55 English 7.12 Emergency Operation An Emergency Alarm is used to indicate a critical situation. You are able to initiate an Emergency at any time even when there is activity on the current channel. Your dealer can set the duration of a button press for the programmed Emergency button, except for long press, which is similar with all other buttons:

Short Press Duration between 0.05 seconds and 0.75 seconds. Long Press Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow NOTE:

Only one of the Emergency Alarms above can be assigned to the programmed Emergency button. In addition, each alarm has the following types:

Regular Radio transmits an alarm signal and shows audio and/or visual indicators. Duration between 1.00 second and 3.75 seconds. Silent The Emergency button is assigned with the Emergency On/Off feature. Check with your dealer for the assigned operation of the Emergency button. NOTE:

If a short press to the Emergency button initiates Emergency mode, then a long press to the same enables the radio to exit Emergency mode. If a long press to the Emergency button initiates Emergency mode, then a short press to the same enables the radio to exit Emergency mode. Your radio supports three Emergency Alarms:

56 Radio transmits an alarm signal without any audio or visual indicators. Radio receives calls without any sound through the speaker, until the programmed hot mic transmission period is over and/or you press the PTT button. Silent with Voice Radio transmits an alarm signal without any audio or visual indicators, but allow incoming calls to sound through the speaker. If hot mic is enabled, the incoming calls sound through the speaker after the programmed hot mic transmission period is over. The indicators only appear once you press the PTT button. 7.12.1 Sending Emergency Alarms This feature allows you to send an Emergency Alarm, a non-voice signal, which triggers an alert indication on a group of radios. Your radio does not display any audio or visual indicators during Emergency mode when it is set to Silent. Follow the procedure to send Emergency Alarms on your radio. 1 Press the programmed Emergency On button. The green LED lights up. NOTE:

If programmed, the Emergency Search tone sounds. This tone is muted when the radio transmits or receives voice, and stops when the radio exits Emergency mode. The Emergency Search tone can be programmed through CPS. 2 Wait for acknowledgment. If successful:

The Emergency tone sounds. English The red LED blinks. If unsuccessful after all retries have been exhausted:

A low-pitched tone sounds. The radio exits the Emergency Alarm mode. 7.12.2 Sending Emergency Alarms with Call This feature allows you to send an Emergency Alarm with Call to a group of radios. Upon acknowledgement by a radio within the group, the group of radios can communicate over a programmed Emergency channel. 57 English Follow the procedure to send Emergency Alarms with call on your radio. Wait for the Talk Permit Tone to end and speak clearly into the microphone if enabled. 1 Press the programmed Emergency On button. The green LED lights up. NOTE:

If programmed, the Emergency Search tone sounds. This tone is muted when the radio transmits or receives voice, and stops when the radio exits Emergency mode. The Emergency Search tone can be programmed by your dealer or system administrator. 2 Wait for acknowledgment. If successful:

The Emergency tone sounds. The red LED blinks. 3 Press the PTT button to make the call. The green LED lights up. 4 Do one of the following:

58 Wait for the PTT Sidetone to end and speak clearly into the microphone if enabled. 5 Release the PTT button to listen. 6 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond to the call. 7 To exit the Emergency mode once the call ends, press the Emergency Off button. If you do not press the Emergency Off button to exit the Emergency mode, the red LED blinks and the radio stays in Emergency mode. 7.12.3 Emergency Alarms with Voice to Follow This feature allows you to send an Emergency Alarm with Voice to Follow to a group of radios. Your radio microphone is automatically activated, allowing you to communicate with the group of radios without pressing the PTT button. This activated microphone state is also known as hot mic. Sending Emergency Alarms with Voice to Follow English If your radio has Emergency Cycle Mode enabled, repetitions of hot mic and receiving period are made for a programmed duration. During Emergency Cycle Mode, received calls sound through the speaker. If you press the PTT button during the programmed receiving period, you hear a prohibit tone, indicating that you should release the PTT button. The radio ignores the PTT button press and remains in Emergency mode. If you press the PTT button during hot mic, and continue to press it after the hot mic duration expires, the radio continues to transmit until you release the PTT button. If the Emergency Alarm request fails, the radio does not retry to send the request, and enters the hot mic state directly. NOTE:

Some accessories may not support hot mic. Check with your dealer or system administrator for more information. 7.12.4 1 Press the programmed Emergency On button. The green LED lights up. 2 Once the Emergency tone sounds, speak clearly into the microphone. The radio automatically stops transmitting when:

The cycling duration between hot mic and receiving calls expires, if Emergency Cycle Mode is enabled. The hot mic duration expires, if Emergency Cycle Mode is disabled. The red LED blinks. The radio remains in Emergency mode. 7.12.5 Receiving Emergency Alarms When you receive an Emergency Alarm:

59 English A tone sounds. The red LED blinks. NOTE:

Your radio automatically acknowledges the Emergency Alarm (if enabled). To return to home screen, perform the following actions:

a Press

. b Press or to Yes. c Press to select. The radio returns to the home screen and the display shows the Emergency icon. 7.12.6 Reinitiating Emergency Mode Perform one of the following actions:

Change the channel while the radio is in Emergency mode. 60 NOTE:

You can reinitiate emergency mode only if you enable emergency alarm on the new channel. Press the programmed Emergency On button during an emergency initiation or transmission state. The radio exits the Emergency mode, and reinitiates Emergency. 7.12.7 Exiting Emergency Mode After Sending the Emergency Alarm This feature is only applicable to the radio sending the Emergency Alarm. Your radio exits Emergency mode when:

An acknowledgment is received (for Emergency Alarm only). English All retries to send the alarm have been exhausted. NOTE:

If your radio is powered off, it exits the Emergency mode. The radio does not reinitiate the Emergency mode automatically when it is turned on again. Some radio models may not offer Privacy feature, or may have a different configuration. Check with your dealer or system administrator for more information. Your radio supports two types of privacy, but only one can be assigned to your radio. They are:

Follow the procedure to exit Emergency mode on your radio. Basic Privacy Enhanced Privacy Press the programmed Emergency Off button. 7.13 Privacy This feature helps to prevent eavesdropping by unauthorized users on a channel by the use of a software-based scrambling solution. The signaling and user identification portions of a transmission are not scrambled. Your radio must have privacy enabled on the channel to send a privacy-enabled transmission, although this is not a necessary requirement for receiving a transmission. While on a privacy-enabled channel, the radio is still able to receive clear or unscrambled transmissions. To unscramble a privacy-enabled call or data transmission, your radio must be programmed to have the same Privacy Key for Basic Privacy, or the same Key Value and Key ID for Enhanced Privacy as the transmitting radio. If your radio receives a scrambled call that is of a different Privacy Key, or different Key Value and Key ID, you either hear a garbled transmission for Basic Privacy or nothing at all for Enhanced Privacy. On a privacy-enabled channel, your radio is able to receive clear or unscrambled calls, depending on how your radio is programmed. In addition, your radio may play a warning tone or not, depending on how it is programmed. 61 English The green LED lights up when the radio is transmitting, and blinks rapidly when the radio is receiving an ongoing privacy-enabled transmission. If there is still no acknowledgment by you before the predefined reminder timer expires, the radio initiates an Emergency Alarm. NOTE:

This feature is not applicable in Citizens Band channels that are in the same frequency. 7.13.1 Turning Privacy On or Off Follow the procedure to turn privacy on or off on your radio. Press the programmed Privacy button. 7.14 Lone Worker This feature prompts an emergency to be raised if there is no user activity, such as any radio button press or channel selection, for a predefined time. Following no user activity for a programmed duration, the radio pre-warns you using an audio indicator once the inactivity timer expires. Only one of the following Emergency Alarms is assigned to this feature:

Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow The radio remains in the emergency state, allowing voice messages to proceed until action is taken. See Emergency Operation on page 56 for more information on ways to exit Emergency. NOTE:

Check with your dealer or system administrator for more information. 7.15 Password Lock You can set a password to restrict access to your radio. Each time you turn on your radio, you are asked to enter the password. Your radio supports a 4-digit password input. 62 English Your radio is unable to receive calls in locked state. If you enter the wrong password after the third attempt, your radio shows the following indications:

7.15.1 Accessing the Radio by Using Password Turn on your radio. 1 Enter the four-digit password. a To enter the first digit of the password, use the Channel Selector Knob. b To enter each digit of the remaining three digits of the password, press Side Button 1 or 2. 2 Your radio automatically checks the validity of the password when you enter the last digit of the password. If you enter the password correctly, the radio powers up. If you enter the wrong password after the first and second attempt, your radio shows the following indications:

A continuous tone sounds. Repeat step 1. A tone sounds. The yellow LED double blinks. Your radio enters into locked state for 15 minutes. Wait for the 15-minute locked state timer to end and then repeat step 1. NOTE:

If you turn off and turn your radio on again, the 15-minute timer restarts. 7.15.2 Unlocking Radios in Locked State Your radio is unable to receive calls in locked state. Follow the procedure to unlock your radio in locked state. Do one of the following:

If the radio is powered on, wait for 15 minutes and then repeat the steps in Accessing the Radio by Using Password on page 63 to access the radio. If the radio is powered off, power up the radio. Your radio restarts the 15-minute timer for locked state. A tone sounds. The yellow LED double blinks. 63 English Wait for 15 minutes and then repeat the steps in Accessing the Radio by Using Password on page 63 to access the radio. 7.17 Over-the-Air Programming 7.16 Auto-Range Transponder System The Auto-Range Transponder System (ARTS) is an analog-only feature designed to inform you when your radio is out-of-range of other ARTS-equipped radios. ARTS-equipped radios transmit or receive signals periodically to confirm that they are within range of each other. Your radio provides indications of states as follows:

First-Time Alert A tone sounds. ARTS-in-Range Alert A tone sounds, if programmed. ARTS-Out-of-Range Alert A tone sounds. The red LED rapidly blinks. NOTE:

Check with your dealer or system administrator for more information. 64 Your dealer can remotely update your radio through Over-the-Air Programming (OTAP) without any physical connection. Additionally, some settings can also be configured by using OTAP. When your radio undergoes OTAP, the green LED blinks. When your radio receives high volume data:

The channel becomes busy. A negative tone sounds if you press the PTT button. Once the programming update is complete, a tone sounds, and your radio restarts (powers off and on again). If the programming update is unsuccessful, a tone sounds and the red LED blinks once. NOTE:

If the programming update is unsuccessful, the software update failure indications appear every time you turn on your radio. Contact your dealer to reprogram your radio with the latest software to eliminate the software update failure indications. 7.18 Wi-Fi Operation This feature allows you to set up and connect to a Wi-

Fi network. Wi-Fi supports updates for radio firmware, codeplug, and resources such as language packs and voice announcement. NOTE:

This feature is applicable to XPR 3300e Bluetooth and Wi-Fi models only. Wi-Fi is a registered trademark of Wi-Fi Alliance. Your radio supports WEP/WPA/WPA2-Personal and WPA/

WPA2-Enterprise Wi-Fi networks. WEP/WPA/WPA2-Personal Wi-Fi network Uses pre-shared key (password) based authentication. Pre-shared key can be entered by using the menu or CPS/RM. WPA/WPA2-Enterprise Wi-Fi network Uses certificate-based authentication. Your radio must be pre-configured with a certificate. English NOTE:

Check with your dealer or system administrator to connect to WPA/WPA2-Enterprise Wi-Fi network. The programmed Wi-Fi On or Off button is assigned by default. Check with your dealer or system administrator to determine how your radio has been programmed. Voice Announcements for the programmed Wi-Fi On or Off button can be customized through CPS according to user requirements. Check with your dealer or system administrator for more information. 7.18.1 Turning Wi-Fi On or Off Press the programmed Wi-Fi On or Off button. Voice Announcement sounds Turning On Wi-Fi or Turning Off Wi-Fi. 65 English 7.18.2 Connecting to a Network Access Point When you turn on Wi-Fi, the radio scans and connects to a network access point. NOTE:

The programmed Wi-Fi Status Query button is assigned by your dealer or system administrator. Voice Announcements for the programmed Wi-Fi Status Query button can be customized according to user requirements by using CPS. Check with your dealer or system administrator to determine how your radio has been programmed. The WPA-Enterprise Wi-Fi network access points are pre-configured. Check with your dealer or system administrator to determine how your radio has been programmed. Press the programmed Wi-Fi Status Query button for the connection status using Voice Announcement. Voice Announcement sounds when Wi-Fi is Off, Wi-

Fi is On but No Connection, or Wi-Fi is On with Connection. 66 English Utilities This chapter explains the operations of the utility functions available in your radio. 8.1 Squelch Levels Press the programmed Squelch button. One of the following tone sounds:

Positive Indicator Tone Radio is operating in tight squelch. Negative Indicator Tone Radio is operating in normal squelch. You can adjust the squelch level to filter out unwanted calls with low signal strength or channels with noise higher than normal background. 8.2 Power Levels Normal This is the default setting. Tight This setting filters out unwanted calls and/or background noise. Calls from remote locations may also be filtered out. 8.1.1 Setting Squelch Levels You can customize the power setting to high or low for each channel. High This enables communication with radios located at a considerable distance from you. Low This enables communication with radios in closer proximity. Follow the procedure to set the squelch levels on your radio. 8.2.1 Setting Power Levels Follow the procedure to set the power levels on your radio. 67 English Press the programmed Power Level button. If successful:

The Positive Indicator Tone sounds. Radio transmits at low power. Turn the radio off and then power it on again to enable VOX. Change the channel by using the Channel Selector knob to enable VOX. Turn VOX on or off by using the programmed VOX If unsuccessful:

button. The Negative Indicator Tone sounds. Press the PTT button during radio operation to disable Radio transmits at high power. VOX. 8.3 Voice Operating Transmission NOTE:

Turning this feature on or off is limited to radios with this function enabled. Check with your dealer or system administrator for more information. The Voice Operating Transmission (VOX) allows you to initiate a hands-free voice-activated call on a programmed channel. The radio automatically transmits, for a programmed period, whenever the microphone on the VOX-capable accessory detects voice. 8.3.1 Turning Voice Operating Transmission On or Off Follow the procedure to turn VOX on or off on your radio. NOTE:

This feature is not applicable in Citizens Band channels that are in the same frequency. You can enable or disable VOX by doing one of the following:

68 Press the programmed VOX button to toggle the feature on or off. The Negative Indicator Tone sounds. All tones and alerts are turned off. English NOTE:

If the Talk Permit Tone is enabled, use a trigger word to initiate the call. Wait for the Talk Permit Tone to finish before speaking clearly into the microphone. See Turning Talk Permit Tone On or Off for more information. 8.4 Turning Radio Tones/Alerts On or Off You can enable and disable all radio tones and alerts, if needed, except for incoming Emergency alert tone . Follow the procedure to turn tones and alerts on or off on your radio. Press the programmed All Tones/Alerts button. If successful:

The Positive Indicator Tone sounds. All tones and alerts are turned on. If unsuccessful:

8.5 Turning Intelligent Audio On or Off Your radio automatically adjusts the audio volume to overcome current background noise in the environment, inclusive of both stationary and non-stationary noise sources. This is a receive-only feature and does not affect transmission audio. Follow the procedure to turn Intelligent Audio on or off on your radio. Press the programmed Intelligent Audio button. 8.6 Turning Acoustic Feedback Suppressor On or Off The feature allows you to minimize acoustic feedback in received calls. Follow the procedure to turn Acoustic Feedback Suppressor on or off on your radio. 69 English Press the programmed AF Suppressor button. One of the following tone sounds:

Positive Indicator Tone Acoustic Feedback Suppressor is activated. Negative Indicator Tone Acoustic Feedback Suppressor is not activated. 70 English Authorized Accessories List Part Number Description Motorola Solutions provides a list of accessories to improve the productivity of your radio. Table 2: Antenna Part Number Description PMAD4116_ PMAD4117_ PMAD4118_ PMAD4119_ PMAD4120_ PMAD4121_ PMAE4069_ VHF, 144165 MHz, Helical Anten-

na VHF, 136155 MHz, Helical Anten-

na VHF, 152174 MHz, Helical Anten-

na VHF, 136148 MHz, Stubby Anten-

na VHF, 146160 MHz, Stubby Anten-

na VHF, 160174 MHz, Stubby Anten-

na UHF, 400450 MHz, Stubby Anten-

na PMAE4070_ PMAE4071_ PMAE4079_ UHF, 440490 MHz, Stubby Anten-

na UHF, 470527 MHz, Stubby Anten-

na UHF, 400527 MHz, Slim Whip An-

tenna Table 3: Batteries Part Number Description PMNN4406_R PMNN4407_R PMNN4409_R PMNN4435_R Core Slim Li-Ion, 1600 mAh IP56 Battery IMPRES Slim Li-Ion, 1600 mAh IP56 Battery IMPRES Li-Ion Non-FM, 2250 mAh IP56 Battery Li-Mn 1400 mAh low temp -30 C IP67 Submersible Battery PMNN4463_ Battery Li-Ion, IP57 2050 mAh 71 English Part Number Description Part Number Description PMNN4488_ PMNN4490_5 PMNN4491_ PMNN4493_ IMPRES Li-Ion, 3000 mAh, IP68 Battery for Vibrating Belt Clip IMPRES Li-Ion, 2900 mAh TIA4950 HAZLOC IP68 Battery IMPRES Slim Li-Ion, 2100 mAh IP68 Battery IMPRES Li-Ion, 3000 mAh IP68 Battery, low voltage PMNN4543_ Core Li-Ion, 2450 mAh IP68 Battery PMNN4544_ IMPRES Li-Ion, 2450 mAh IP68 Battery PMLN5611_ PMLN5863_ PMLN5865_ PMLN5867_ PMLN5869_ 3 in. Replacement Leather Swivel Belt Loop Hard Leather Carry Case with 3 in. Fixed Belt Loop for Limited Keypad Radio Hard Leather Carry Case with 3 in. Swivel Belt for Limited Keypad Ra-

dio Hard Leather Carry Case with 2.5 in. Swivel Belt Loop for Limited Key-

pad Radio Nylon Carry Case with 3 in. Fixed Belt Loop for Limited Keypad Radio Table 4: Carry Devices Part Number Description PMLN4651_ Belt Clip for 2 in. Belt Width PMLN5610_ 2.5 in. Replacement Leather Swivel Belt Loop PMLN7008_ Belt Clip for 2.5 in. Belt Width PMLN7296_ RLN6486_ RLN6487_ Vibrating Belt Clip for 2.5 in. Belt Width Leather Radio Strap Leather Radio Strap, Size XL 5 Applicable to XPR 3300e only. 72 English Part Number Description Part Number Description RLN6488_ Anti-Sway Leather Radio Strap NNTN8226_ Table 5: Chargers Part Number Description EPNN9288_ U.S. Switch Mode Power Supply HKVN4036_ IMPRES Battery Fleet Management License Key NNTN7392_ IMPRES Battery Reader NNTN7616_ IMPRES Vehicular Charger NNTN7677_ NLN7967_ NNTN8045_ IMPRES Battery Fleet Management Multi-Unit Charger Interface Unit Wall Mount Bracket for IMPRES Multi-Unit Charger IMPRES Battery Fleet Management Single-Unit Charger Interface Unit NNTN8117_ Core Single Unit Charger NNTN8224_ Standard Single-Unit Charger with Power Supply, Linear PRC NNTN8275_ NNTN8525_ WPLN4211_ WPLN4212_ WPLN4218_ WPLN4219_ WPLN4232_ Standard Single-Unit Charger with Power Supply, Linear, 110 V ac US Plug Standard Single-Unit Charger with Power Supply, Switch-Mode 21 W, NA/LA Travel Charger, Rapid Rate with Voltage Regulated Vehicular Charg-

er Adapter, Custom Charger Base, Mounting Bracket, and Coil Cord IMPRES Multi-Unit Charger, Base Only IMPRES Multi-Unit Charger, US/NA Plug IMPRES Multi-Unit Charger with Display, Base Only IMPRES Multi-Unit Charger with Display, US/NA Plug IMPRES Single-Unit Charger with Switch Mode Power Supply 73 English Part Number Description Part Number Description WPLN4243_ PMPN4174_ WPLN4253_ IMPRES Single-Unit Charger, Base Only IMPRES Single-Unit Charger CEC Compliant LTD Single-Unit Charger IMPRES

(SMPS NA/LA) Table 6: Earbuds and Earpieces Part Number Description Receive-Only Covered Earbud with Coiled Cord, for Remote Speaker Microphone D-Shell Receive-Only Earpiece

(One Size) for Remote Speaker Mi-

crophone Earpiece In-Line Mic/PTT Swivel, MagOne Earset with Boom Micrphone, Ma-

gOne AARLN4885_ PMLN4620_ PMLN5727_ PMLN5732_ 74 PMLN5733_ PMLN6757_ PMLN7396_ PMLN7560_ RLN4941_ RLN6511_ RLN6512_ RLN6513_ Earbud with In-Line Mic/PTT, Ma-

gOne Adjustable D-Style with In-Line Mic and PTT Adjustable Receive-Only Earpiece with Remote Speaker Microphone Receive-Only Earpiece with Trans-

lucent Tube Receive-Only Earpiece with Trans-

lucent Tube and Rubber Eartip for Remote Speaker Microphone Clear EP7-Small Hearing Protectors

[Sonic Defenders] Ultra Earplugs, 28 dB Noise reduction Clear EP7-Medium Hearing Protec-

tors [Sonic Defenders] Ultra Ear-

plugs, 28 dB Noise reduction Clear EP7-Large Hearing Protectors

[Sonic Defenders] Ultra Earplugs, 28 dB Noise reduction Part Number Description Part Number Description English WADN4190_ Receive-Only Flexible Earpiece for Remote Speaker Microphone Table 7: Headsets and Headset Accessories Part Number Description PMLN5731_ PMLN6635_ Heavy Duty Headset, Noise Cancel-

ling with In-Line PTT Lightweight Over-the-Head Headset Single Muff with In-line Push-to-Talk and Boom Microphone PMLN6759_ Temple Transducer PMLN6760_ Next Generation Behind-the-Head Heavy Duty Headset Slim PMLN6761_ Breeze Headset, MagOne PMLN6763_ PMLN7464_ Next Generation Behind-the-Head Heavy Duty Headset, Slim TIA 4950 Over-the-Head Heavy Duty Head-

set, Slim PMLN7465_ RLN6490_ RLN6491_ Over-the-Head Heavy Duty Head-

set/TIA, Slim XBT Behind-the-Neck, Non-secure Wireless Heavy Duty Headset XBT Overhead, Non-secure Wire-

less Heavy Duty Headset Table 8: Remote Speaker Microphones Part Number Description PMMN4071_ PMMN4073_ PMMN4075_ PMMN4076_ PMMN4108_ IMPRES Remote Speaker Micro-

phone Large, Noise Cancelling with 3.5 mm Jack IMPRES Remote Speaker Micro-

phone Small with 3.5 mm Jack Remote Speaker Microphone Small, No Emergency, IP57 Remote Speaker Microphone Small with 3.5 mm Jack IMPRES Remote Speaker Micro-

phone Windporting, IP67 75 English Table 9: Surveillance Accessories Part Number Description Part Number Description NNTN8189_ PMLN6754_ PMLN6755_ PMLN7269_ PMLN7270_ 3-Wire Surveillance Kit with Quick Disconnect Adapter and Clear Acoustic Tube, Black 3-Wire Surveillance Kit with Quick Disconnect Adapter and Clear Acoustic Tube, Beige 2-Wire Surveillance Kit with Quick Disconnect Adapter and Clear Acoustic Tube, Black 2-Wire Surveillance Kit with Quick Disconnect Adapter and Clear Acoustic Tube, Beige Table 10: Wireless Part Number Description NNTN8125_ Non-secure Wireless Accessory Kit, Operational Critical Wireless Ear-

piece, standard pair, 12 in. Cable 76 Non-secure Wireless Bluetooth Ac-

cessory Kit, Operational Critical Wireless Earpiece, 12 in. Cable, No Charger Earpiece 12 in. Cable, for use with Bluetooth POD Operations Critical Wireless 1-Wire Surveillance Kit with Translucent Tube Non-secure Operational Critical Wireless Earbud with 45.7 in. Cable Non-secure Operation Critical Wire-

less Earbud with 11.4 in. Cable NTN2572_ PMLN7052_ NNTN8295_ NNTN8294_ PMLN6462_ Non-secure Wireless Accessory Kit PMLN7696_ Completely Discreet Earpiece Kit NNTN8385_ NNTN8296_ Wireless Neckloop Y-adapter and retention hook for Completely Dis-

creet Kit Wireless Covert Kit, includes two sets of 2-Wire Earbuds (1 Black and 1 White), 1-Wire Earbud (Black), Part Number Description RLN6500_ RLN6550_ RLN6556_ PMLN7181_ PMLN7203_ and a 3.5 mm Adapter to plug into any off-the-shelf headphones Bluetooth Accessory Kit with NA Power Supply Swivel Earpiece with In-line Micro-

phone, Bluetooth Accessory Kit Pod, pack of 3 Flexible Earpiece with Boom Micro-

phone, Bluetooth Pod, Charging Cradle MOTOTRBO Bluetooth Acessory Kit, Flexfit Earpiece with NA Power Supply Flexible Fit Swivel Earpiece with Boom Microphone, Bluetooth Ac-

cessory Kit Pod, Multipack, pack of 3 NOTE:

Only applicable for XPR 3300e Bluetooth and Wi-

Fi models. English Table 11: Miscellaneous Accessories Part Number Description HLN6602_ HLN9985_ NTN5243_ RLN4295_ RLN4570_ RLN4815_ 1505596Z02 4280384F89 Universal Chest Pack Waterproof Bag, Includes Large Carry Strap Adjustable Black Nylon Carrying Strap (Attaches to D-Ring on Carry Case) Small Clip, Epaulet Strap Break-A-Way Chest Pack Universal Radio Pack and Utility Case, Fanny Pack Replacement Strap for RLN4570_ and HLN6602_ Universal Radio Pack, Extension Belt 4200865599 Wide Leather Belt, 1.75 in. 0104058J40 Dust Cover 77 English Maritime Radio Use in the VHF Frequency Range Special Channel Assignments Emergency Channel If you are in imminent and grave danger at sea and require emergency assistance, use VHF Channel 16 to send a distress call to nearby vessels and the United States Coast Guard. Transmit the following information, in this order:

1 MAYDAY, MAYDAY, MAYDAY. 2 THIS IS _____________________, CALL SIGN __________. State the name of the vessel in distress 3 times, followed by the call sign or other identification of the vessel, stated 3 times. 3 Repeat MAYDAY and the name of the vessel. 4 WE ARE LOCATED AT _______________________. State the position of the vessel in distress, using any information that will help responders to locate you, e.g.:

latitude and longitude 78 bearing (state whether you are using true or magnetic north) distance to a well-known landmark vessel course, speed or destination 5 State the nature of the distress. 6 Specify what kind of assistance you need. 7 State the number of persons on board and the number needing medical attention, if any. 8 Mention any other information that would be helpful to responders, such as type of vessel, vessel length and/or tonnage, hull color, etc. 9 OVER. 10 Wait for a response. 11 If you do not receive an immediate response, remain by the radio and repeat the transmission at intervals until you receive a response. Be prepared to follow any instructions given to you. Non-Commercial Call Channel For non-commercial transmissions, such as fishing reports, rendezvous arrangements, repair scheduling, or berthing information, use VHF Channel 9. Operating Frequency Requirements Table 12: VHF Marine Channel List English A radio designated for shipboard use must comply with Federal Communications Commission Rule Part 80 as follows:

on ships subject to Part II of Title III of the Communications Act, the radio must be capable of operating on the 156.800 MHz frequency. on ships subject to the Safety Convention, the radio must be capable of operating:

in the simplex mode on the ship station transmitting frequencies specified in the 156.025157.425 MHz frequency band, and in the semiduplex mode on the two frequency channels specified in the table below. NOTE:

Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters. Additional information about operating requirements in the Maritime Services can be obtained from the full text of FCC Rule Part 80 and from the US Coast Guard. Channel Num-

ber 1 2

4 5 6 7 8 9 10 11 12 13**

14 15**

Frequency (MHz) Transmit 156.050 156.100 156.150 156.200 156.250 156.300 156.350 156.400 156.450 156.500 156.550 156.600 156.650 156.700 156.750 Receive 160.650 160.700 160.750 160.800 160.850 160.950 156.450 156.500 156.550 156.600 156.650 156.700 156.750 79 English 16 17**

18 19 20

22

24 25 26 27 28 60

62 63

80 156.800 156.850 156.900 156.950 157.000 157.050 157.100 157.150 157.200 157.250 157.300 157.350 157.400 156.025 156.075 156.125 156.175 156.225 156.800 156.850 161.500 161.550 161.600 161.650 161.700 161.750 161.800 161.850 161.900 161.950 162.000 160.625 160.675 160.725 160.775 160.825 65 66 67**

68 69 71 72 73 74 75 76 77**

78 79 80

156.275 156.325 156.375 156.425 156.475 156.575 156.625 156.675 156.725

156.875 156.925 156.975 157.025 157.075 157.125 157.175 160.875 160.925 156.375 156.425 156.475 156.575 156.675 156.725

161.525 161.575 161.625 161.675 161.725 161.775 84 85 86 87 88 157.225 157.275 157.325 157.375 157.425 161.825 161.875 161.925 161.975 162.025 NOTE:

* Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters.

** Low power (1 W) only.

*** Guard band. NOTE:

A in the Receive column indicates that the channel is transmit only. Declaration of Compliance for the Use of Distress and Safety Frequencies The radio equipment does not employ a modulation other than the internationally adopted modulation for maritime English use when it operates on the distress and safety frequencies specified in RSS-182 Section 7.3. Technical Parameters for Interfacing External Data Sources Table 13: Technical Parameters for Interfacing External Data Sources RS232 18 V USB 3.6 V SB9600 5 V 28 kb/s 12 Mb/s 9.6 kb/s 5000 ohm 90 ohm 120 ohm Input Volt-

age (Volts Peak-to-

peak) Max Data Rate Impe-

dance 81 Nickel Metal-Hydride

(NiMH) or Lithium-Ion (Li-

lon) Batteries IMPRES Batteries, When Used Exclusively with IM-

PRES Chargers 12 Months 18 Months English Batteries and Chargers Warranty The Workmanship Warranty The workmanship warranty guarantees against defects in workmanship under normal use and service. All MOTOTRBO Batteries IMPRES Chargers (Sin-

gle-Unit and Multi-Unit, Non-Display) IMPRES Chargers (Multi-

Unit with Display) 24 Months 24 Months 12 Months The Capacity Warranty The capacity warranty guarantees 80% of the rated capacity for the warranty duration. 82 Limited Warranty MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:

Motorola Solutions, Inc. ("Motorola Solutions") warrants the Motorola Solutions manufactured Communication Products listed below ("Product") against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:

Portable Radios Product Accessories (Ex-

cluding Batteries and Chargers) Two (2) Years One (1) Year Motorola Solutions, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty English period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of Motorola Solutions. This express limited warranty is extended by Motorola Solutions to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by Motorola Solutions. Motorola Solutions assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of Motorola Solutions. Unless made in a separate agreement between Motorola Solutions and the original end user purchaser, Motorola Solutions does not warrant the installation, maintenance or service of the Product. Motorola Solutions cannot be responsible in any way for any ancillary equipment not furnished by Motorola Solutions which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, Motorola Solutions 83 English disclaims liability for range, coverage, or operation of the system as a whole under this warranty. III. STATE LAW RIGHTS:

II. GENERAL PROVISIONS This warranty sets forth the full extent of Motorola Solutions responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at Motorola Solutions option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA SOLUTIONS BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola Solutions through one of its authorized warranty service locations. If you first contact the company which sold you the Product (for example, dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola Solutions at 1-800-927-2744. 84 V. WHAT THIS WARRANTY DOES NOT COVER 1 Defects or damage resulting from use of the Product in other than its normal and customary manner. any of the seals on the battery enclosure of cells are broken or show evidence of tampering. the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. 2 Defects or damage from misuse, accident, water, or 8 Freight costs to the repair depot. English neglect. 3 Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. 4 Breakage or damage to antennas unless caused directly by defects in material workmanship. 5 A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-

Motorola Solutions supplied equipment) which adversely affect performance of the Product or interfere with Motorola Solutions normal warranty inspection and testing of the Product to verify any warranty claim. 6 Product which has had the serial number removed or made illegible. 7 Rechargeable batteries if:

9 A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with Motorola Solutions published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from Motorola Solutions. 10 Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. 11 Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS Motorola Solutions will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola Solutions will pay 85 English those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:

1 Motorola Solutions will be notified promptly in writing by such purchaser of any notice of such claim, 2 Motorola Solutions will have sole control of the defense of such suit and all negotiations for its settlement or compromise, and 3 Should the Product or parts become, or in Motorola Solutions opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit Motorola Solutions, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by Motorola Solutions. Motorola Solutions will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by 86 Motorola Solutions, nor will Motorola Solutions have any liability for the use of ancillary equipment or software not furnished by Motorola Solutions which is attached to or used in connection with the Product. The foregoing states the entire liability of Motorola Solutions with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted Motorola Solutions software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola Solutions software. Motorola Solutions software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such Motorola Solutions software or exercise of rights in such Motorola Solutions software is permitted. No license is granted by implication, estoppel or otherwise under Motorola Solutions patent rights or copyrights. VII. GOVERNING LAW This Warranty is governed by the laws of the State of Illinois, U.S.A. Dclaration de conformit du fournisseur Dclaration de conformit du fournisseur Rglement CFR 47, partie 2, section 2.1077(a) de la FCC Franais canadien Partie responsable Nom : Motorola Solutions, Inc. Adresse : 2000 Progress Pkwy, Schaumburg, IL. 60196 Numro de tlphone : 1 800 927-2744 Dclare par les prsentes que le produit :

Nom du modle : XPR 3300/XPR 3300e est conforme aux rglementations suivantes :

Partie 15, sous-partie B, section 15.107(a), 15.107(d) et section 15.109(a) des rglements de la FCC Appareil numrique de classe B En tant que priphrique dordinateur personnel, cet appareil est conforme aux dispositions de la partie 15 des rglements de la FCC. Son utilisation est assujettie aux deux conditions suivantes :

7 Franais canadien 1 Cet appareil ne doit pas causer dinterfrence nuisible; et 2 Cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. AVIS :

Cet quipement a fait lobjet de tests et a t dclar conforme aux limites tablies pour un appareil numrique de classe B, conformment la section 15 des rglements de la FCC. Ces limites sont fixes afin doffrir une protection suffisante contre des interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de lnergie de radiofrquence et, sil nest pas install ou utilis conformment aux instructions, il peut provoquer des interfrences nuisibles aux communications radio. Cependant, il est impossible de garantir quil ny aura aucune interfrence dans une installation particulire. Si cet appareil cause une interfrence nuisible la rception de la radio ou de la tlvision, ce qui peut tre dtermin en teignant et en allumant lappareil, vous tes encourag remdier la situation en prenant une ou plusieurs des mesures suivantes :

Rorienter ou dplacer lantenne rceptrice. Augmenter la distance entre lquipement et le rcepteur. Brancher lappareil dans une autre prise sur un circuit diffrent de celui du rcepteur. Consulter le distributeur ou un technicien de radio ou de tlvision chevronn pour obtenir de laide. 8 Pour un usage en fonction de la slection du code de pays (appareils WLAN) AVIS :

La slection du code de pays est pour les modles non .-U. seulement et nest pas disponible sur tous les modles amricains. Conformment la rglementation de la FCC, tous les produits Wi-Fi commercialiss aux tats-Unis doivent tre fixs sur des canaux fonctionnant aux tats-Unis uniquement. Franais canadien 9 Industrie Canada pour cet metteur. Afin de limiter les interfrences radio pour les autres utilisateurs, le type et le gain de lantenne doivent tre choisis de faon ce que la puissance isotrope rayonne quivalente (P.I.R.E.) ne soit pas plus forte quil ne le faut pour tablir la communication. Cet metteur radio a t approuv par Industrie Canada pour utilisation avec une antenne approuve par Motorola Solutions offrant le gain maximal autoris et limpdance requise pour le type dantenne indiqu. Il est strictement interdit dutiliser avec cet appareil tout type dantenne ne figurant pas dans cette liste et prsentant un gain suprieur au maximum indiqu pour le type. Franais canadien Consignes de scurit importantes Radios bidirectionnelles portatives :

exposition aux radiofrquences et scurit du produit MISE EN GARDE :

Cette radio doit tre utilise des fins professionnelles uniquement. Avant dutiliser la radio, lisez le guide Radios bidirectionnelles portatives : exposition aux radiofrquences et scurit du produit, qui contient dimportantes instructions de fonctionnement pour une utilisation scuritaire et des informations sur lexposition aux frquences radiolectriques, dans le but dassurer votre conformit aux normes et rglements en vigueur. Toute modification effectue cet appareil sans lautorisation explicite de Motorola Solutions peut annuler lautorisation dutiliser cet appareil. Selon la rglementation dIndustrie Canada, cet metteur radio ne peut tre utilis quavec une antenne dont le type et le gain maximal (ou minimal) sont approuvs par 10 Avis aux utilisateurs (FCC) Cet appareil est conforme la partie 15 des rglements de la FCC daprs les conditions suivantes :

Cet appareil ne doit pas causer dinterfrence nuisible. Cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. Toute modification apporte cet appareil sans lautorisation explicite de Motorola Solutions peut annuler lautorisation dutiliser cet appareil. Franais canadien 11 Franais canadien Avis aux utilisateurs

(Industrie Canada) Le fonctionnement de votre radio Motorola Solutions est assujetti la Loi sur la radiocommunication et doit se conformer aux rgles et rglements du ministre Innovation, Sciences et Dveloppement conomique Canada du gouvernement fdral. Industrie Canada exige que les utilisateurs de frquences mobiles terrestres prives obtiennent une licence avant dutiliser leur quipement. 12 www.motorolasolutions.com/mototrbo Motorola Solutions, Inc. 500 W Monroe Street Chicago, IL 60661 U.S.A. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2012 and 2021 Motorola Solutions, Inc. All rights reserved.

en-US RF Energy Exposure Training and Product Safety Information for Portable Two-Way Radios fr-CA Formation sur lexposition aux RF et information sur la scurit du produit pour radios bidirectionnelles portatives es-LA Capacitacin sobre la exposicin a energa de radiofrecuencia e informacin de proteccin del producto para radios de dos vas porttiles pt-BR Treinamento sobre a Exposio Energia de RF e Informaes de Segurana do Produto para Rdios Portteis Bidirecionais https://learning.motorolasolutions.com/User_Documentation Caution Before using this radio, read this booklet which contains important operating instructions. For information on product details, brochures, user manuals and approved accessories. Please refer to www.motorolasolutions.com. Compliance with RF Exposure Standards National and international regulations require manufacturers to comply with the RF energy exposure limits for portable two-way radios before they can be marketed. Your Motorola Solutions two-way radio is designed, manufactured, and tested to comply with all applicable national and international regulations for human exposure to radio frequency electromagnetic energy. When two-way radios are used as a consequence of employment, applicable regulations may require users to be fully aware of and able to control their exposure to meet occupational requirements. RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use Notice: This radio is intended for use in occupational/controlled conditions where users are aware of their exposure and can exercise control over their exposure to meet the requirements in national and international regulations. This radio device is not authorized for general population, consumer use. For more information on what RF energy exposure is, and how to control your exposure to ensure compliance with established RF exposure limits, consult the following websites:

https://www.fcc.gov/

https://www.osha.gov/

https://osha.europa.eu/en http://www.who.int/peh-emf/project/en/

http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11467.html http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html For additional user training information on exposure requirements, consult the following websites:

English https://www.motorolasolutions.com/en_us/about/company-overview/

corporate-responsibility/governance-and-policies/wireless-

communication-and-health-faqs.html http://learning.motorolasolutions.com/

RF Exposure Compliance and Control Guidelines To control your exposure, and ensure compliance with the relevant RF exposure limits, always adhere to the following guidelines:

Do not remove any of the RF Exposure Labels if present from this device or its related accessories. Attach these instructions to the device when you transfer it to other Do not use this device if the operational requirements described users. herein are not met. Operating Instructions Transmit no more than 50% of the time. To transmit (talk), press the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting more than 50% of the time may cause RF exposure compliance requirements to be exceeded. Hold the radio in a vertical position in front of the face with the microphone (and other parts of the radio including the antenna) at least 1 in. (2.5 cm) away from the nose or lips. Antenna should be kept away from the eye. When worn on the body, always place the radio in a Motorola Solutions-approved clip, holder, holster, case, or body harness for this product. DO NOT hold the antenna when the radio is transmitting. DO NOT use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. To ensure continued compliance with applicable RF exposure limits, use only Motorola Solutions approved, supplied or replacement antennas, batteries, and accessories. For a list of Motorola Solutions approved accessories please refer to your user manual or visit www.motorolasolutions.com 1 English Acoustic Safety Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the volume of the radio, the sooner your hearing will be affected. Hearing damage from loud noise is sometimes undetectable at first, and can have a cumulative effect. To protect your hearing:

Use the lowest volume necessary to do your job. Turn up the volume only if you are in noisy surroundings. Turn down the volume before adding headset or earpiece. Limit the amount of time you use headsets or earpieces at high volume. When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear. Medical Devices If you use a personal medical device, such as a pacemaker or hearing aid, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Holsters Incorporating Magnets Some Motorola Solutions holsters incorporate strong, neodymium magnets. If you use a personal medical device, such as a pacemaker or hearing aid, consult the manufacturer of your device to determine if it can be used in close proximity to magnets. Your physician may be able to assist you in obtaining this information. Also be aware that magnets can damage other products, including cell phones, computers, hard drives, and other electronic devices, as well as credit cards and magnetic media. Keep the holster away from any mechanical device that could be affected by a magnetic field. Consult the manufacturer of your product to determine if your device or product can be used in close proximity to magnets. Notice to Users (FCC) This device complies with Part 15 of the FCC rules per the following conditions:

This device may not cause harmful interference. 2 The device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment. Operational Warnings The following explains the operational warnings:

For Vehicle With Air Bags Potentially Explosive Atmospheres Warning:

Refer to vehicle manufacturer's manual prior to installation of electronic equipment to avoid interference with air bag wiring. DO NOT place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. Warning:

Do not carry a radio that is not certified for Hazardous Locations into a potentially explosive atmosphere. It could result in a serious injury or death. You should only use a radio certified for hazardous locations in potentially explosive atmospheres. Explosive atmospheres refer to hazard classified locations that may contain hazardous gas, vapors, dusts, such as fueling areas below decks on boats, fuel or chemical transferor storage facilities, and areas where the air contains chemicals or particles such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted. DO NOT remove, install, or charge batteries in such areas, or remove or install antennas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. Blasting Caps and Blasting Areas Warning: To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: Turn off two-way radio. Obey all signs and instructions. Batteries Caution: Use only Motorola Solutions approved batteries. Risk of explosion if the battery is replaced by an incorrect type. Charge your battery using the approved Motorola Solutions charger. Connect the charger/power supply to a nearby and easily accessible Use the battery in accordance with its water and/or dust Ingress power outlet. Protection (IP) rating. Do not discard your battery into a fire. Do not replace the battery in any area labeled "Hazardous Atmosphere". Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery. Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven. Do not allow conductive material such as jewelry, keys, or beaded chains to touch exposed battery terminals. Do not dispose of batteries with household waste. Repair Warning:

Repairs to a Motorola Solutions intrinsically safe radio product certified by, for example, FM, UL, CSA, CENELEC, should only be done at a location that has been audited under the certifying body's repair and service standard. Contact Motorola Solutions for assistance regarding repairs and service of Motorola Solutions intrinsically safe equipment. A repair constitutes something done internally to the unit that would bring it back to its original condition. English Items not considered as repairs are those in which an action is performed on a unit which does not require the outer casing of the unit to be opened in a manner that exposes the internal electrical circuits of the unit. Do Not Substitute Options or Accessories The Motorola Solutions communications equipment certified as intrinsically safe by the approving agency (FM, UL, CSA, CENELEC) is tested as a complete system which consists of the listed agency Approved portable, Approved battery, and Approved accessories or options, or both. This Approved portable and battery combination must be strictly observed. There must be no substitution of items, even if the substitute has been previously Approved with a different Motorola Solutions communications equipment unit. Approved configurations are listed by the Approving Agency (FM, UL, CSA, CENELEC). The Intrinsically Safe Approval Label affixed to radio refers to the intrinsically safe classification of that radio product, and the approved batteries that can be used with that system. The manual PN referenced on the Intrinsically Safe Approval Label identifies the approved Accessories and or options that can be used with that portable radio unit. Using a non-Motorola Solutions-intrinsically safe battery and/or accessory with the Motorola Solutions approved radio unit will void the intrinsically safe approval of that radio unit. European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) Directive The European Union's WEEE directive requires that products sold into EU countries must have the crossed out trash bin label on the product

(or the package in some cases). As defined by the WEEE directive, this cross-out trash bin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection system in their country. 3 For Brazil, information for disposal and recycling of electronic waste, batteries, and packaging, please call: 0800168272. English 4 Mise en garde Avant d'utiliser cette radio, lisez cette brochure qui contient d'importantes consignes d'utilisation. Pour obtenir plus dinformation sur les dtails du produit, les brochures, les manuels et les accessoires approuvs, Veuillez vous reporter www.motorolasolutions.com. Conformit aux normes sur l'exposition aux radiofrquences Les rglementations nationales et internationales noncent que les fabricants doivent sassurer que leurs produits sont conformes aux limites dexposition l'nergie RF avant de les commercialiser. Cette radio bidirectionnelle Motorola Solutions a t conue, fabrique et teste afin de garantir sa conformit aux normes nationales et internationales lies l'exposition des tres humains l'nergie lectromagntique de radiofrquence. Lorsque les radios bidirectionnelles sont utilises des fins professionnelles, la rglementation en vigueur exige que les utilisateurs soient pleinement conscients des effets de l'exposition et qu'ils soient capables de contrler le niveau d'exposition auquel ils se soumettent afin de rpondre aux exigences de leur profession. Information de sensibilisation et de gestion de l'exposition l'nergie RF, et consignes pour l'utilisation professionnelle Avis: Cette radio a t conue pour un usage professionnel dans un environnement contrl, o les utilisateurs sont pleinement conscients de l'exposition l'nergie RF laquelle ils sont soumis et peuvent exercer un contrle sur cette exposition afin de respecter les limites tablies par les rglements nationaux et internationaux. Ce dispositif radio n'est pas autoris pour l'utilisation grand public par des consommateurs ordinaires. Franais (Canada) https://www.fcc.gov/

https://www.osha.gov/

https://osha.europa.eu/en http://www.who.int/peh-emf/project/en/

http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11467.html http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html Pour plus de renseignements sur la formation des utilisateurs relativement aux limites d'exposition, consultez les sites suivants :

https://www.motorolasolutions.com/en_us/about/company-overview/

corporate-responsibility/governance-and-policies/wireless-

communication-and-health-faqs.html http://learning.motorolasolutions.com/

Directives de conformit et de contrle de l'exposition aux RF Pour contrler votre exposition et garantir le respect des limites d'exposition applicables, observez toujours les consignes suivantes. Ne pas retirer les tiquettes relatives l'exposition aux RF qui sont apposes sur cet appareil ou sur ses accessoires. Joignez ces directives l'appareil lorsque vous le transfrez d'autres utilisateurs. N'utilisez pas cet appareil si les conditions de fonctionnement dcrites aux prsentes ne sont pas runies. Consignes dutilisation Ne pas mettre plus de 50 % du temps. Pour transmettre (parler), appuyez sur le bouton (PTT). Pour recevoir les appels, relchez le bouton PTT. Le fait de transmettre plus de 50 % du temps peut entraner le dpassement de la limite dexposition normalise au rayonnement RF. Tenez la radio la verticale devant le visage, en maintenant une distance dau moins 2,5 centimtres (1 pouce) entre le micro (et les autres parties de la radio, y compris lantenne) et le nez ou les lvres. Lantenne doit tre maintenue loin des yeux. Visitez les sites Web suivants pour obtenir plus de renseignements sur ce qu'est l'nergie RF et sur les moyens de contrle prendre afin de respecter les limites tablies en matire d'exposition aux radiofrquences :

Lorsque vous portez la radio sur vous, fixez-la toujours avec une pince ou une attache de ceinture et placez-la dans un tui ou un harnais approuv par Motorola Solutions pour l'utilisation avec ce produit. 1 Franais (Canada) NE TENEZ PAS lantenne entre vos doigts pendant que la radio met. N'UTILISEZ PAS une radio portative, quelle quelle soit, dont lantenne est endommage. Si une antenne endommage entre en contact avec votre peau, il peut en rsulter une brlure lgre. Pour assurer la conformit continue avec les limites d'exposition aux RF applicables, utilisez uniquement les antennes, les batteries et les accessoires de remplacement ou fournis et approuvs par Motorola Solutions. Pour obtenir une liste des accessoires approuvs par Motorola Solutions, veuillez consulter votre manuel ou visitez le site www.motorolasolutions.com Protection de l'oue Une exposition des bruits forts en provenance de n'importe quelle source pendant de longues priodes pourrait affecter votre audition de manire temporaire ou permanente. Plus le volume de la radio est lev, plus le dommage pour l'oue survient rapidement. Des dommages auditifs dus l'exposition des bruits forts peuvent ne pas tre dcels immdiatement, mais leurs effets sont parfois cumulatifs. Pour protger votre audition :

Rglez le volume le plus bas possible pour effectuer votre travail. Montez le volume seulement si vous vous trouvez dans un environnement bruyant. Baissez le volume avant dajouter un casque ou une oreillette. Limitez la priode de temps dutilisation de casques ou dcouteurs volume lev. Lorsque vous utilisez la radio sans casque ni couteur, ne placez pas le haut-parleur directement sur votre oreille. Appareils mdicaux Si vous utilisez un dispositif mdical personnel, comme un stimulateur cardiaque ou une prothse auditive, consultez le fabricant de votre appareil pour dterminer s'il est convenablement protg contre les RF. Votre mdecin peut vous aider obtenir ces renseignements. tuis incorporant des aimants Certains tuis Motorola Solutions intgrent des aimants puissants en nodyme. Si vous utilisez un dispositif mdical personnel, comme un 2 stimulateur cardiaque ou une prothse auditive, consultez le fabricant de votre appareil pour dterminer s'il peut tre utilis proximit d'aimants. Votre mdecin peut vous aider obtenir ces renseignements. Notez galement que les aimants peuvent endommager d'autres produits, notamment les tlphones cellulaires, les ordinateurs, les disques durs et autres appareils lectroniques, ainsi que les cartes de crdit et les supports magntiques. Gardez l'tui loin de tout dispositif mcanique qui pourrait tre affect par un champ magntique. Consultez le fabricant de votre produit pour savoir si votre appareil ou votre produit peut tre utilis proximit d'aimants. Avis aux utilisateurs (FCC) Cet appareil est conforme la partie 15 des rglements de la FCC daprs les conditions suivantes :

Cet appareil ne doit pas causer dinterfrence nuisible. L'appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. Toute modification effectue cet appareil sans lautorisation explicite de Motorola Solutions peut annuler lautorisation dutiliser cet appareil. Avertissements de fonctionnement Le tableau suivant explique les avertissements de fonctionnement :

Pour vhicules quips de coussins gonflables Avertissement:

Consultez le manuel du fabricant du vhicule avant d'installer un appareil lectronique afin d'viter toute interfrence avec le cblage des coussins gonflables. NE PLACEZ PAS de radio portative dans la zone situe au-

dessus d'un coussin gonflable ou dans la zone de dploiement de ce dernier. Un coussin gonflable de scurit se dploie avec beaucoup de force. Si une radio portative se trouve dans la zone de dploiement du coussin, lorsque celui-ci se gonfle, la radio peut tre propulse avec une force considrable et risque alors d'occasionner de graves lsions corporelles aux passagers du vhicule. Atmosphres potentiellement explosives Avertissement:

Ne transportez pas une radio qui n'est pas certifie pour les emplacements dangereux dans une atmosphre potentiellement explosive. Cela pourrait entraner des blessures graves ou la mort. Vous ne devez utiliser qu'une radio certifie pour les endroits dangereux dans les atmosphres potentiellement explosives. On retrouve des atmosphres explosives dans les lieux classs comme tant dangereux en raison de la prsence de gaz, de vapeurs et de poussires reprsentant un danger, par exemple, les zones d'avitaillement en carburant dans des cales de bateau, les installations de transfert et de stockage de carburant ou de produits chimiques, et les zones dans lesquelles l'air est charg en produits chimiques ou en particules telles que de la poudre de crales, de la poussire ou de la poudre mtallique. Les zones atmosphres potentiellement explosives affichent gnralement des panneaux de mise en garde, mais ce n'est pas toujours le cas. VITEZ d'enlever, d'installer ou de charger les batteries, ou d'enlever ou d'installer des antennes dans de tels lieux. Les tincelles dans des atmosphres potentiellement explosives peuvent provoquer une explosion ou un incendie et entraner des lsions corporelles, voire la mort. Zone de dynamitage et dtonateurs Avertissement: teignez la radio lorsque vous vous trouvez proximit de dtonateurs lectriques ou dans une zone de dynamitage afin dviter de dclencher une explosion, ou lorsque vous vous trouvez dans un endroit o il est indiqu :

teindre les radios bidirectionnelles . Respectez tous les panneaux et toutes les consignes. Batteries Solutions. Mise en garde: Utilisez uniquement les batteries agres par Motorola Solutions. La batterie risque d'exploser si elle n'est pas correctement remplace. Chargez votre batterie l'aide du chargeur approuv par Motorola Franais (Canada) Branchez le chargeur/bloc d'alimentation une prise murale proximit facilement accessible. Utilisez la batterie conformment son indice de protection (IP) contre l'eau et la poussire. Ne jetez pas votre batterie au feu. Ne remplacez pas la batterie dans un endroit qui porte la mention atmosphre dangereuse . Veillez ne pas dmonter, craser, percer, dcouper ou autrement modifier la forme de votre batterie. Ne faites pas scher une batterie mouille ou humide avec un appareil lectrique ou une source de chaleur, comme un schoir cheveux ou un four micro-ondes. Ne permettez pas des matriaux conducteurs, comme des bijoux, des cls ou des mailles de chane dentrer en contact avec les bornes de la batterie. Ne jetez pas les batteries avec les ordures domestiques. Rparations Avertissement:

La rparation d'une radio de scurit intrinsque de Motorola Solutions homologue, notamment, par FM, UL, CSA ou CENELEC, doit tre effectue uniquement un endroit ayant fait l'objet d'une vrification en vertu de la norme sur les rparations et l'entretien de l'organisme de certification. Contactez Motorola Solutions afin d'obtenir de l'assistance pour l'entretien et la rparation d'une unit Motorola Solutions scurit intrinsque. Le terme rparation dsigne tout travail effectu sur les composants internes de l'unit afin de la ramener son tat d'origine. Un travail qui ne ncessite pas l'ouverture du botier de l'unit afin d'en exposer les circuits lectriques internes ne constitue pas une rparation. vitez de substituer des options ou des accessoires. L'quipement de communications Motorola Solutions certifi de scurit intrinsque par l'entit d'homologation (FMRC, UL, CSA, CENELEC) est test en tant que systme complet, savoir : la radio portative, la batterie, les accessoires et les options, tous agrs par l'entit correspondante. L'intgrit de cette configuration forme d'une radio portative et d'une batterie agres doit tre strictement respecte. 3 Franais (Canada) Aucune substitution d'lment n'est permise, mme si l'lment de remplacement a pralablement t agr pour une autre unit de communication Motorola Solutions. Les configurations agres peuvent tre consultes dans la liste mise disposition par l'entit d'homologation (FMRC, UL, CSA, CENELEC). L'tiquette d'homologation de scurit intrinsque appose sur la radio identifie la classification de scurit intrinsque de cette radio ainsi que les batteries agres qui peuvent tre utilises avec ce systme. Le numro de rfrence du manuel mentionn sur l'tiquette d'homologation de scurit intrinsque identifie les accessoires et/ou les options agrs qui peuvent tre utiliss avec cette unit de radio portative. Le fait de ne pas utiliser une batterie ou un accessoire Motorola Solutions de scurit intrinsque avec l'unit de radio Motorola Solutions agre annule l'homologation de scurit intrinsque de cette unit de radio. Directive sur la mise au rebut des quipements lectriques et lectroniques de lUnion europenne (UE)

(WEEE) La directive WEEE de lUnion europenne exige que les produits (ou leur emballage, dans certains cas) vendus dans les pays de lUE portent ltiquette de la poubelle barre. Comme le dfinit la directive WEEE, cette tiquette de poubelle barre signifie que les clients et les utilisateurs finaux dans les pays de lUE ne doivent pas jeter les quipements lectriques et lectroniques ou leurs accessoires dans les ordures domestiques. Les clients ou les utilisateurs finaux dans les pays de lUE doivent communiquer avec le reprsentant ou le centre de service de leur fournisseur dquipement pour obtenir des renseignements sur le systme de collecte des dchets de leur pays. Pour obtenir des renseignements sur l'limination et le recyclage des dchets lectroniques, des batteries et des emballages pour le Brsil, veuillez appeler : 0800168272. 4 Precaucin Antes de usar este radio, lea el folleto que contiene instrucciones de funcionamiento importantes. Para obtener informacin sobre los detalles del producto, folletos, manuales de usuario y accesorios aprobados. consulte www.motorolasolutions.com. Conformidad con las normas de exposicin a radiofrecuencia Las regulaciones nacionales e internacionales obligan a que los fabricantes cumplan con los lmites de exposicin a energa de radiofrecuencia para radios porttiles de dos vas antes de que se puedan comercializar. El radio de dos vas de Motorola Solutions est diseado, fabricado y probado para cumplir con todas las regulaciones nacionales e internacionales correspondientes en materia de exposicin humana a la energa electromagntica de radiofrecuencia. Cuando los radios de dos vas se usan para trabajar, las regulaciones correspondientes podran exigir que los usuarios conozcan y controlen su nivel de exposicin para cumplir con los requisitos de uso profesional. Conocimiento de la exposicin a energa de radiofrecuencia, informacin de control e instrucciones de funcionamiento para uso ocupacional Nota: Este radio est diseado para usarse en condiciones controladas o profesionales, donde los usuarios tengan pleno conocimiento de su exposicin y puedan controlarla con el fin de cumplir con los requisitos de las regulaciones nacionales e internacionales. Este dispositivo de radio no est autorizado para el uso particular de la poblacin en general. Para obtener ms informacin sobre el significado de la exposicin a energa de radiofrecuencia y cmo controlar la exposicin con el fin de asegurar el cumplimiento de los lmites de exposicin a radiofrecuencias establecidos, consulte los siguientes sitios web:

https://www.fcc.gov/

https://www.osha.gov/

https://osha.europa.eu/en Espaol (Latinoamrica) http://www.who.int/peh-emf/project/en/

http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11467.html http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html Para obtener informacin adicional de la capacitacin de los usuarios sobre los requisitos de exposicin, consulte los siguientes sitios web:

https://www.motorolasolutions.com/en_us/about/company-overview/

corporate-responsibility/governance-and-policies/wireless-

communication-and-health-faqs.html http://learning.motorolasolutions.com/

Cumplimiento de exposicin a radiofrecuencia y pautas de control Para controlar la exposicin y garantizar el cumplimiento de los lmites de exposicin a radiofrecuencias correspondientes, respete siempre las siguientes pautas:

No retire ninguna de las etiquetas de exposicin a radiofrecuencias, si las hubiere, de este dispositivo o sus accesorios respectivos. Adjunte estas instrucciones al dispositivo cuando se lo transfiera a otros usuarios. No utilice este dispositivo si no se cumple con los requisitos de funcionamiento descritos en este documento. Instrucciones de funcionamiento No transmita ms de un 50 % del tiempo. Para transmitir (hablar), presione el botn Push-to-Talk (PTT). Para recibir llamadas, suelte el botn PTT. Una transmisin superior al 50 % del tiempo de uso podra provocar que se superen los requisitos de cumplimiento de exposicin a radiofrecuencia. Sostenga el radio en posicin vertical frente a su rostro con el micrfono (y otras partes del radio, incluida la antena) al menos a 2,5 cm (1 pulg.) de distancia de la nariz o los labios. Mantenga la antena alejada de los ojos. Siempre que use el radio ajustado al cuerpo, pngalo en un clip, un soporte, un estuche, una funda o un arns para el cuerpo aprobado por Motorola Solutions para este producto. NO sujete la antena mientras el radio est realizando una transmisin. 1 Espaol (Latinoamrica) NO utilice radios porttiles que tengan la antena daada. Si una antena daada toca su piel, puede causar una pequea quemadura. Para garantizar el cumplimiento continuo de los lmites de exposicin a radiofrecuencia correspondientes, utilice solamente las antenas, las bateras y los accesorios de repuesto suministrados o aprobados por Motorola Solutions. telfonos celulares, computadoras, discos duros y otros dispositivos electrnicos, adems de las tarjetas de crdito y los medios magnticos. Mantenga la funda lejos de cualquier dispositivo mecnico que el campo magntico pueda afectar. Consulte con el fabricante del producto para determinar si el dispositivo o el producto se pueden utilizar cerca de imanes. Para obtener una lista de los accesorios aprobados por Motorola Solutions, consulte el manual del usuario o visite www.motorolasolutions.com. Seguridad acstica La exposicin a ruidos fuertes de cualquier fuente durante perodos prolongados podra afectar la audicin de manera temporal o permanente. Cuanto ms alto sea el volumen del radio, ms rpido se ver afectada la audicin. En ocasiones, el dao a la audicin provocado por ruidos fuertes es indetectable en un principio y puede tener efecto acumulativo. Para proteger la audicin:

Utilice el volumen ms bajo que necesite para hacer su trabajo. Aumente el volumen solo si se encuentra en un ambiente ruidoso. Reduzca el volumen antes de conectar los auriculares o el audfono. Limite el tiempo durante el cual usa los auriculares o los audfonos a volumen alto. Cuando use el radio sin audfonos o auriculares, no coloque el altavoz del radio directamente en la oreja. Aparatos mdicos Si utiliza un dispositivo mdico, como un marcapasos o una prtesis auditiva, consulte al fabricante del dispositivo para determinar si est adecuadamente protegido contra las energas de radiofrecuencia. Su mdico podra ayudarlo a obtener esta informacin. Fundas con imanes Algunas fundas de Motorola Solutions incluyen imanes de neodimio resistentes. Si utiliza un dispositivo mdico personal, como un marcapasos o una prtesis auditiva, consulte con el fabricante del dispositivo para determinar si se puede utilizar cerca de imanes. Su mdico podra ayudarlo a obtener esta informacin. Adems, tenga presente que los imanes pueden daar otros productos, incluidos Nota para los usuarios (FCC) Este dispositivo cumple con la Parte 15 de las normas de la FCC segn las siguientes condiciones:

Este dispositivo no puede provocar interferencia nociva. El dispositivo debe aceptar toda interferencia recibida, incluida aquella interferencia que pudiera causar un funcionamiento no deseado. Los cambios o las modificaciones que se realicen en este dispositivo, no aprobados expresamente por Motorola Solutions, podran anular el permiso del usuario de operar este equipo. Advertencias de funcionamiento A continuacin, se explican las advertencias de funcionamiento:

Para vehculos con bolsas de aire Advertencia:

Consulte el manual del fabricante del vehculo antes de instalar equipos electrnicos, a fin de evitar la interferencia en el cableado de las bolsas de aire. NO coloque el radio porttil sobre una bolsa de aire ni en el rea de despliegue de la bolsa. Las bolsas de aire se inflan con mucha fuerza. Si se pone un radio porttil en el rea de despliegue de la bolsa de aire y esta se infla, es posible que el radio salga disparado con gran fuerza y cause lesiones graves a los ocupantes del vehculo. Atmsferas potencialmente explosivas Advertencia:

No lleve un radio que no est certificado para lugares peligrosos a una atmsfera potencialmente explosiva. Puede provocar lesiones graves o la muerte. En atmsferas potencialmente explosivas, solo debe utilizar un radio certificado para lugares peligrosos. 2 Espaol (Latinoamrica) El trmino atmsferas explosivas se refiere a lugares No permita que materiales conductores como joyas, llaves o cadenas clasificados como peligrosos en los que podra haber gases, vapores o polvos peligrosos, como reas con combustibles bajo las cubiertas de los botes o instalaciones de almacenamiento o transferencia de qumicos, y reas en que el aire contenga productos qumicos o partculas, como material granulado, polvo o polvo metlico. A menudo, en las reas con atmsferas potencialmente explosivas hay seales de precaucin, aunque no siempre es as. NO retire, instale ni cargue bateras, ni tampoco retire o instale antenas en dichas reas. Las chispas en ambientes potencialmente explosivos pueden desencadenar una explosin o un incendio, y ocasionar lesiones o incluso la muerte. reas de voladuras y explosivos Advertencia: Para evitar posibles interferencias en operaciones de voladuras, apague el radio cuando se encuentre cerca de zonas de voladuras elctricas, en un rea de explosivos o en reas donde se encuentre el siguiente aviso: Apague el radio de dos vas. Obedezca todas las seales e instrucciones. Bateras Precaucin: Utilice nicamente bateras aprobadas por Motorola Solutions. Existe un riesgo de explosin si sustituye la batera por otra de una clase incorrecta. Cargue la batera con cargadores aprobados por Motorola Solutions. Conecte el cargador/la fuente de alimentacin a una toma de corriente cercana y de fcil acceso. Utilice la batera de acuerdo con su clasificacin de proteccin de ingreso (IP) contra polvo y agua. No arroje la batera al fuego. No cambie la batera en un rea designada como Atmsfera peligrosa. No desarme, rompa, perfore, triture ni intente cambiar de ningn otro modo la forma de la batera. No intente secar una batera mojada o hmeda con un electrodomstico o una fuente de calor externa, como un secador de pelo o un horno microondas. hagan contacto con los terminales expuestos de la batera. No bote las bateras en la basura domstica. Reparaciones Advertencia:

Las reparaciones de productos de un radio Motorola Solutions intrnsecamente seguro certificado, por ejemplo, FM, UL, CSA, CENELEC, deben realizarse solo en una ubicacin que haya sido auditada segn el estndar de reparacin y servicio de la entidad certificante. Comunquese con Motorola Solutions para solicitar asistencia relacionada con reparaciones y tareas de servicio de los equipos Motorola Solutions intrnsecamente seguros. Una reparacin consta de algo hecho en el interior de la unidad que debe devolverla a su estado original. Las instancias que no se consideran reparaciones son las que incluyen una accin realizada en una unidad que no requiere que la cubierta externa se abra de manera tal que queden expuestos los circuitos elctricos de la unidad. No sustituya los elementos opcionales ni los accesorios Los equipos de comunicaciones de Motorola Solutions que cuentan con un certificado que indica que son intrnsecamente seguros, emitido por una agencia de aprobacin (FM, UL, CSA, CENELEC), se prueban como sistemas completos que incluyen: el dispositivo porttil aprobado, la batera aprobada y los accesorios o los elementos opcionales aprobados, o ambos. Debe respetar de manera estricta esta combinacin de dispositivo porttil y batera aprobada. No se deben sustituir los elementos, aun si la pieza de sustitucin se prob anteriormente para otro equipo de comunicaciones Motorola Solutions. Las configuraciones aprobadas son detalladas por la agencia de aprobacin (FM, UL, CSA, CENELEC). La etiqueta de aprobacin como intrnsecamente seguro adherida al radio indica la clasificacin de intrnsecamente seguro de ese radio e indica las bateras aprobadas que pueden usarse con ese sistema. La etiqueta de aprobacin de intrnsecamente seguro adherida al radio hace referencia a un nmero de pieza del manual que indica los 3 Espaol (Latinoamrica) accesorios o los elementos opcionales que se pueden usar con la unidad de radio porttil. El uso de una batera o un accesorio aprobado como intrnsecamente seguro que no sea de Motorola Solutions con el radio Motorola Solutions aprobado anular la aprobacin de intrnsecamente seguro de esa unidad de radio. Directiva de Residuos de Aparatos Elctricos y Electrnicos (RAEE) de la Unin Europea (UE) La directiva de RAEE de la Unin Europea requiere que los productos que se venden en los pases de la UE tengan la etiqueta de un bote de residuos tachado sobre el producto (o en el paquete en algunos casos). Como se define en la Directiva de RAEE, esta etiqueta con un bote de basura tachado indica que los clientes y los usuarios finales en los pases de la UE no deben deshacerse de los equipos o accesorios elctricos y electrnicos con la basura domstica. Los clientes o los usuarios finales en los pases de la UE deben comunicarse con su representante distribuidor de equipos o el centro de servicio locales para obtener informacin sobre el sistema de recoleccin de residuos de su pas. Para Brasil, informacin de eliminacin y reciclaje de desechos electrnicos, bateras y embalajes, llame al: 0800168272. 4 Ateno Antes de usar o rdio, leia este folheto, que contm importantes instrues de operao. Para obter informaes sobre detalhes do produto, folhetos, manuais do usurio e acessrios aprovados. Consulte www.motorolasolutions.com. Conformidade com os Padres de Exposio RF Os regulamentos nacionais e internacionais exigem que os fabricantes estejam em conformidade com os limites de exposio energia de RF para rdios portteis bidirecionais antes de serem comercializados. O rdio bidirecional da Motorola Solutions foi projetado, fabricado e testado para estar em conformidade com todos os regulamentos nacionais e internacionais para exposio de seres humanos energia eletromagntica de radiofrequncia. Ao usar rdios bidirecionais por motivos de trabalho, os regulamentos aplicveis podem exigir que os usurios estejam totalmente conscientes e aptos a controlar sua exposio de modo a atender s exigncias ocupacionais. Informaes sobre Conscientizao e Controle de Exposio Energia de RF e Instrues Operacionais para o Uso Ocupacional Comunicado: Este rdio destina-se ao uso em condies ocupacionais/controladas, em que os usurios estejam cientes de sua exposio e possam exercer controle sobre ela, para atender aos requisitos nos regulamentos nacionais e internacionais. O uso do dispositivo de rdio pela populao em geral no autorizado. Para obter mais informaes sobre a exposio energia de RF e como controlar a exposio para garantir a conformidade com os limites de exposio RF estabelecidos, acesse os seguintes sites:

https://www.fcc.gov/

https://www.osha.gov/

https://osha.europa.eu/en http://www.who.int/peh-emf/project/en/

http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11467.html http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html Portugus (Brasil) Para informaes adicionais de treinamento sobre os requisitos de exposio, acesse os seguintes sites:

https://www.motorolasolutions.com/en_us/about/company-overview/

corporate-responsibility/governance-and-policies/wireless-

communication-and-health-faqs.html http://learning.motorolasolutions.com/

Diretrizes de Conformidade e Controle de Exposio RF Para controlar a exposio e garantir a conformidade com os limites de exposio RF em questo, siga sempre as diretrizes a seguir:

No remova as Etiquetas de Exposio RF, se houverem, do dispositivo ou acessrios relacionados. Anexe essas instrues ao dispositivo quando o transferir a outros No use este dispositivo se os requisitos operacionais descritos aqui usurios. no forem atendidos. Instrues Operacionais Transmita, no mximo, 50% do tempo. Para transmitir (falar), pressione o boto PTT (Push-To-Talk). Para receber chamadas, solte o boto PTT (Push-To-Talk, apertar para falar). Transmitir mais de 50% do tempo pode fazer que os requisitos de conformidade de exposio RF sejam excedidos. Segure o rdio em posio vertical em frente ao rosto com o microfone (e outras partes do rdio incluindo a antena) a pelo menos 2,5 cm (1 polegada) de distncia do nariz ou dos lbios. A antena deve ficar longe dos olhos. Ao usar o rdio junto ao corpo, sempre o coloque em um prendedor, suporte, suporte para cinto ou estojo para este produto aprovado pela Motorola Solutions. NO segure a antena enquanto o rdio estiver transmitindo. NO utilize um rdio porttil com antena danificada. Se a antena danificada entrar em contato com sua pele, poder causar uma queimadura leve. Para garantir constantemente a conformidade com os limites aplicveis de exposio RF, use apenas antenas, baterias e acessrios de reposio aprovados ou fornecidos pela Motorola Solutions. 1 Portugus (Brasil) Para obter uma lista dos acessrios aprovados pela Motorola Solutions, consulte o manual do usurio ou acesse www.motorolasolutions.com Segurana Acstica A exposio a rudos muito altos de qualquer origem por longos perodos pode prejudicar sua audio temporria ou permanentemente. Quanto maior for o volume do rdio, mais cedo sua audio ser prejudicada. s vezes, os danos auditivos causados por rudos fortes no so detectados em sua fase inicial, e podem ter efeito cumulativo. Para proteger sua audio:

Use o volume mais baixo necessrio para a execuo da sua tarefa. Aumente o volume somente se estiver em ambientes barulhentos. Reduza o volume antes de conectar o headset ou o fone de ouvido. Limite o tempo de uso dos fones auriculares ou fones de ouvido com volume alto. Ao utilizar o rdio sem monofones ou fones de ouvido, no coloque o alto-falante do rdio diretamente em contato com seus ouvidos. Equipamentos Mdicos Se voc usa um dispositivo mdico pessoal, como um marca-passo ou aparelho auditivo, consulte o fabricante do dispositivo para determinar se est adequadamente protegido contra energia de RF. Seu mdico pode ajud-lo a obter essas informaes. Coldre magntico Alguns coldres da Motorola Solutions contm ms fortes e de neodmio. Se voc usa um dispositivo mdico pessoal, como um marca-passo ou aparelho auditivo, consulte o fabricante do dispositivo para determinar se ele pode ser usado prximo de ms. Seu mdico pode ajud-lo a obter essas informaes. Tambm esteja ciente de que os ms podem danificar outros produtos, incluindo telefones celulares, computadores, discos rgidos e outros dispositivos eletrnicos, bem como cartes de crdito e de mdia magntica. Mantenha o coldre longe de qualquer dispositivo mecnico que pode ser afetado por um campo magntico. Consulte o fabricante do seu produto para determinar se o seu dispositivo ou produto pode ser usado prximo de ms. 2 Aviso aos Usurios (FCC) Este dispositivo est em conformidade com a parte 15 das normas da FCC, de acordo com as seguintes condies:

Este dispositivo no pode causar interferncias prejudiciais sade. O dispositivo deve aceitar qualquer interferncia recebida, inclusive as que possam causar operao indesejvel do dispositivo. Alteraes ou modificaes feitas neste dispositivo, que no sejam expressamente aprovadas pela Motorola Solutions, podero anular o direito do usurio de operar o equipamento. Avisos Operacionais A seguir so explicados os avisos operacionais:

Para Veculos Equipados com Air Bags Ambientes Potencialmente Explosivos Aviso:

Consulte o manual do fabricante do veculo antes de instalar equipamentos eletrnicos para evitar interferncia com o funcionamento do air bag. NO coloque um rdio porttil na rea sobre um air bag ou na rea de liberao do air bag. Os air bags inflam com muita fora. Se um rdio porttil estiver colocado na rea de liberao do air bag e o air bag inflar, o rdio poder ser impelido com grande fora e causar srios ferimentos aos ocupantes do veculo. Aviso:

No transporte um rdio que no seja certificado para locais de risco em ambientes potencialmente explosivos. Isso pode resultar em ferimentos graves ou morte. Voc deve usar apenas um rdio certificado para locais de risco em ambientes potencialmente explosivos. Ambientes potencialmente explosivos referem-se a locais classificados como de risco que podem conter gases, vapores ou ps nocivos, como reas de abastecimento embaixo do convs principal em barcos, instalaes de armazenamento ou transferncia de produtos qumicos ou combustvel e reas onde o ar contm partculas ou elementos qumicos, como fibras, poeira ou ps metlicos. As reas com ambientes potencialmente explosivos so frequentes, mas nem sempre h avisos sobre isso. NO remova, instale ou carregue baterias nessas reas, nem remova ou instale antenas. Fascas em um ambiente potencialmente explosivo podem causar uma exploso ou incndio que pode resultar em ferimentos e, at mesmo, morte. Reparo reas e Equipamentos para Detonao Aviso: Para evitar possveis interferncias em operaes de detonao, desligue o rdio quando estiver prximo a detonadores eltricos, reas de detonao ou reas onde haja avisos tais como: Desligue rdios bidirecionais. Obedea a todas as sinalizaes e instrues. Baterias Ateno: Use somente baterias aprovadas pela Motorola Solutions. Se a bateria for substituda por uma de tipo incorreto, haver risco de exploso. Sempre carregue a bateria usando o carregador aprovado pela Motorola Solutions. e de fcil acesso. Conecte o carregador/a fonte de alimentao a uma tomada prxima Use a bateria de acordo com sua classificao de Proteo contra entrada (IP) de p e gua. No descarte a bateria no fogo. No troque a bateria em lugares identificados como "Atmosferas Potencialmente Perigosas". No desmonte, comprima, perfure, fragmente ou tente, de outras maneiras, alterar a forma da bateria. No seque baterias molhadas nem midas usando aparelhos ou fontes de calor, como secadores de cabelo ou fornos de micro-ondas. No permita que materiais condutores como joias, chaves ou correntes toquem os terminais expostos da bateria. No descarte baterias no lixo domstico. Portugus (Brasil) Aviso:

Reparos em rdios intrinsecamente seguros da Motorola Solutions certificados, por exemplo, por FM, UL, CSA, CENELEC, devem ser feitos apenas em um local que passou por auditoria de acordo com as normas de reparo e manuteno dos rgos certificadores. Entre em contato com a Motorola Solutions para obter assistncia sobre reparos e servios em equipamentos Motorola Solutions intrinsecamente seguros. Um reparo constitui algo sendo feito internamente na unidade que a retornar as suas condies originais. Os itens que no so considerados como reparos so os em que a ao realizada em uma unidade que no precisa que a parte externa seja aberta para expor os circuitos eltricos internos da unidade. No Substitua Opes ou Acessrios O equipamento de comunicao Motorola Solutions certificado como intrinsecamente seguro pelos rgos de aprovao (FM, UL, CSA, CENELEC), testado como um sistema completo que consiste do porttil aprovado, bateria aprovada e acessrios e/ou opes aprovados pelo rgo listado. Essa combinao de porttil e bateria aprovada deve ser estritamente observada. No pode haver substituio de itens, mesmo se o substituto tiver sido aprovado previamente com um equipamento de comunicaes Motorola Solutions diferente. As configuraes aprovadas so listadas pelo rgo Aprovador (FM, UL, CSA, CENELEC). A Etiqueta de Aprovao de Intrinsecamente Seguro afixada ao rdio refere-se classificao de intrinsecamente seguro do rdio e da bateria aprovada que pode ser usada com o sistema. O PN manual referenciado na Etiqueta de Aprovao de Intrinsecamente Seguro identifica os acessrios ou opes aprovados que podem ser usados com a unidade de rdio porttil. O uso de uma bateria e/ou acessrio intrinsecamente seguro no Motorola Solutions com a unidade de rdio aprovada pela Motorola Solutions invalidar a aprovao de segurana intrnseca da unidade de rdio. 3 Portugus (Brasil) Diretiva de Resduos de Equipamentos Eltricos e Eletrnicos (WEEE) para a Unio Europeia (UE) A Diretiva de WEEE da Unio Europeia exige que os produtos vendidos nos pases da UE tenham a etiqueta de lixeira riscada no produto (ou no pacote, em alguns casos). Conforme definido pela diretiva WEEE, essa etiqueta de lixeira cruzada indica que os clientes e os usurios nos pases da UE no devem descartar equipamentos ou acessrios eltricos ou eletrnicos em lixo domstico. Os clientes ou os usurios nos pases da UE devem entrar em contato com o representante local do fornecedor do equipamento ou com a central de servios para obter informaes sobre o sistema de coleta de lixo em seu pas. Para informaes sobre descarte e reciclagem de resduos eletrnicos, baterias e embalagens, por favor, ligue: 0800168272. 4 Notes Cover.fm Page 1 Wednesday, April 24, 2019 12:39 PM MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2004 and 2020 Motorola Solutions, Inc. All rights reserved.

*NNTN7223R*

NNTN7223R Printed in

*6881095C98*

6881095C98-LH

Applicant: Motorola Solutions Inc FCC ID: AZ489FT4969 / IC: 109U-89FT4969 EXHIBIT 1 IDENTIFICATION LABEL

(Pursuant to FCC Part 2.1033(c)(11), 2.1033(b)(7) and RSP 100 Annex C and Sec 3) LOCATION See the Attached Photograph or Sketch Bottom of Radio Top of Radio Back of Radio X Back of Radio under Belt Clip TYPE X The label is a poly carbonate film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with the minimum peel strength of 40 oz/inch. MARKINGS (TEXT) X See the Attached Photograph and Exhibit 3 for the actual location of the FCC/IC label on the device. X Label Attached Below. See Attached Drawing. EXHIBIT 1 SHEET 1 OF 4 Applicant: Motorola Solutions Inc FCC ID: AZ489FT4969 / IC: 109U-89FT4969 Figure 1A: FCC/IC Label for model AAH02RDH9VA1AN-1 (Limited Keypad) Non-

TIA4950 Model Figure 1B: FCC/IC Label for model AAH02RDC9VA1AN-1 (Non Keypad) Non-

TIA4950 Model EXHIBIT 1 SHEET 2 OF 4 Applicant: Motorola Solutions Inc FCC ID: AZ489FT4969 / IC: 109U-89FT4969 Figure 1C: FCC/IC Label Label for model AAH02RDH9VA1AN-1 (Limited Keypad) TIA4950 Model Figure 1D: FCC/IC Label for model AAH02RDC9VA1AN-1 (Non Keypad) TIA4950 Model EXHIBIT 1 SHEET 3 OF 4 Applicant: Motorola Solutions Inc FCC ID: AZ489FT4969 / IC: 109U-89FT4969

*** END ***

EXHIBIT 1 SHEET 4 OF 4

Certification Department Date: 8 October 2021 Subject: Application Authorization for FCC/IC filing To Whom It May Concern:

I hereby authorize Arine Lee to apply, on my behalf, the application for the following FCC/IC ID:

FCC/IC ID: AZ489FT4969 / 109U-89FT4969 Please contact me if there are any questions or issues. Regards, Deanna Zakharia Regulatory Compliance Manager Tel: (954) 723 4707 Email: Deanna.zakharia@motorolasolutions.com ____________________________________________________________________________ Motorola Solutions Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322

FCC ID: AZ489FT4969 CONFIDENTIALITY REQUEST 8 October 2021 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transmitter with FCC ID: AZ489FT4969 Dear Sir / Madam, Motorola Solutions Malaysia Sdn Bhd is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5

(Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola Solutions Inc considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d), 0.459 and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as Confidential. Please contact me if you require any additional information. Sincerely, Arine Lee FCC/IC Certification Manager E-mail : arinelee@motorolasolutions.com _______________________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13B

FCC ID: AZ489FT4969 EMC test data explanation summary according KDB 484596 D01 Introduction FCC ID AZ489FT4969 is referencing to previously filed FCC ID AZ489FT7125 with following equipment classes, rule parts and frequency bands:

Equipment Class TNF Rule Part 90,22,74,80 Frequency band 403-512 MHz We, Motorola Solutions will take full responsibility that the test data referenced under Reference Section within this explanation represents compliance for the new FCC ID AZ489FT4969. Explanation of differences Depopulation of components in the BT/WIFI section while maintaining the rest of the components in LMR/GNSS section. There will be no change in the PCB layout too. Spot Check Verification Data Section:

Please refer to the following reports containing spot-check data Equipment Class TNF Rules Part 90,22,74,80 Frequency Band 403-512 MHz Test Cases for Spot check

- Radiated Spurious Emission Test Report ID Reference 31421-EMC-00003 Comments

- Only tested for worst case channel of reference per rules part.

- The result is comparable to the reference both current and reference data are having

>20dB from test limit. Reference Section Please refer to following data for cross-referencing Rule Part 90,22,74,80 Frequency band 403-527 MHz FCC ID AZ489FT7125 Test Report ID Cross Reference 17779-RF-00016 _______________________________________________________________________________________________________________________ MotorolaSolutionsInc.8000WestSunriseBoulevard,FortLauderdale,Florida33322 EXHIBIT06b

FCC ID: AZ489FT4969 Date: October 8, 2021 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT4969 Dear Sir/Madam, Motorola Solutions Malaysia Sdn Bhd herein submits application for Certification of the subject transmitter. This transmitter is intended for use in a portable radio application with capabilities for clear and coded communications with a variable transmit power operating within the following frequency ranges:

Product Name

(PMN) Model Numbers Frequency Range RF Power FCC Rules Part XPR 3500e XPR 3300e AAH02RDH9VA1AN-1 AAH02RDC9VA1AN-1 403-512 MHz Rated: 1 4 W, Max = 4.8 W 22, 74, 90 467.75467.825MHz Max = 2W 80 We are requesting certification under Part(s) of the Commissions Rules listed above to allow operation of this equipment. The subject transmitter complies with Section 90.203 and 80.203(b) of the Rules in that the operator cannot directly program transmit frequencies using the unit's normally accessible external controls. A complete Certification application is enclosed. If you require any additional information, please contact me at 04-2240258. Sincerely, Arine Lee FCC/IC Certification Manager E-mail : arinelee@motorolasolutions.com _______________________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13A

FCC ID: AZ489FT4969 8 October 2021 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification for Certification of Transmitter with FCC ID: AZ489FT4969. Dear Sir/Madam:

This transmitter is designed to operate in the following frequency ranges:

Band/Mode UHF UHF Frequency ranges 403 - 512 MHz 467.75 - 467.825 MHz FCC rule parts 22, 74, 90 80 To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Motorola Solutions is requesting that the FCC lists the above applicable frequencies range under FCC Rule Parts 22, 74, 80, and 90 on the FCC Grant. For the FCCs Rule Parts 22, 74, 80 and 90 applications, this radio is used in systems by Federal and Public Safety agencies including Police, Fire, and Emergency Medical Services, etc. as indicated in the table below. Equipment programming is the responsibility of Authorized Service Personnel. Also, the radio complies with 47 CFR Part 90.203(e) and 80.203(b), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Per the FCCs KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that its a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range (MHz) Part 22 Part 74 Part 80 Part 90 Federal Other Regions 403-406 406.1-450 450-454 454-456 456-460 460-462.5375 462.5375-462.7375*

462.7375-467.5375 467.5375-467.7375 467.7375-470 470-512

*Canada x x x x x x x x x x x x x x x x x x x Please contact me if you required any additional information. Sincerely, Arine Lee FCC/IC Certification Manager E-mail : arinelee@motorolasolutions.com _______________________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13C

Applicant: Motorola Solutions Inc FCC ID: AZ489FT4969 / IC: 109U-89FT4969 EXHIBIT 2 Statement of Certification

(Pursuant to FCC Part 2.907, 2.908 and RSP 100 Sec 4) 2.1 Statement of Certification Transceiver type described herein (AZ489FT4969/109U-89FT4969) is in compliance with all applicable parts of the FCC rules and ISED RSS standards. Each unit manufactured, imported, or marketed will conform to the samples tested herein, within the statistical variations that can be expected due to high volume production and test measurement error. NAME: ONG KHYE SIANG SIGNATURE:

DATE: September 24, 2021 TITLE: Engineering Manager EXHIBIT 2 SHEET 1 OF 1