FCC ID: AZ489FT7110 2-Way Portable Radio with Bluetooth

en-US RF Energy Exposure Training and Product Safety Information for Portable Two-Way Radios fr-CA Formation sur lexposition aux RF et information sur la scurit du produit pour radios bidirectionnelles portatives es-LA Capacitacin sobre la exposicin a energa de radiofrecuencia e informacin de proteccin del producto para radios de dos vas porttiles pt-BR Treinamento sobre a Exposio Energia de RF e Informaes de Segurana do Produto para Rdios Portteis Bidirecionais English Caution Before using this radio, read this booklet which contains important operating instructions. For information on product details, brochures, user manuals and approved accessories. Please refer to www.motorolasolutions.com. Compliance with RF Exposure Standards National and international regulations require manufacturers to comply with the RF energy exposure limits for portable two-way radios before they can be marketed. Your Motorola Solutions two-way radio is designed, manufactured, and tested to comply with all applicable national and international regulations for human exposure to radio frequency electromagnetic energy. When two-way radios are used as a consequence of employment, applicable regulations may require users to be fully aware of and able to control their exposure to meet occupational requirements. RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use Note: This radio is intended for use in occupational/controlled conditions where users are aware of their exposure and can exercise control over their exposure to meet the requirements in national and international regulations. This radio device is not authorized for general population, consumer use. For more information on what RF energy exposure is, and how to control your exposure to ensure compliance with established RF exposure limits, consult the following websites:

https://www.fcc.gov/

https://www.osha.gov/

https://osha.europa.eu/en http://www.who.int/peh-emf/project/en/

For additional user training information on exposure requirements, consult the following websites:

https://www.motorolasolutions.com/en_us/about/company-overview/corporate-

responsibility/governance-and-policies/wireless-communication-and-health-

faqs.html http://learning.motorolasolutions.com/

RF Exposure Compliance and Control Guidelines To control your exposure, and ensure compliance with the relevant RF exposure limits, always adhere to the following guidelines:

1 English Do not remove any of the RF Exposure Labels if present from this device or its related accessories. Attach these instructions to the device when you transfer it to other users. Do not use this device if the operational requirements described herein are not met. Operating Instructions Transmit no more than 50% of the time. To transmit (talk), press the Push-To-

Talk (PTT) button. To receive calls, release the PTT button. Transmitting more than 50% of the time may cause RF exposure compliance requirements to be exceeded. Hold the radio in a vertical position in front of the face with the microphone (and other parts of the radio including the antenna) at least 1 in. (2.5 cm) away from the nose or lips. Antenna should be kept away from the eye. When worn on the body, always place the radio in a Motorola Solutions-

approved clip, holder, holster, case, or body harness for this product. DO NOT hold the antenna when the radio is transmitting. DO NOT use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. To ensure continued compliance with applicable RF exposure limits, use only Motorola Solutions approved, supplied or replacement antennas, batteries, and accessories. For a list of Motorola Solutions approved accessories please refer to your user manual or visit www.motorolasolutions.com Acoustic Safety Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the volume of the radio, the sooner your hearing will be affected. Hearing damage from loud noise is sometimes undetectable at first, and can have a cumulative effect. To protect your hearing, follow these precautions:

Use the lowest volume necessary to do your job. Turn up the volume only if you are in noisy surroundings. Turn down the volume before putting on a headset or headphones. Limit the amount of time you use a headset or headphones at high volume. When using the radio without a headset or headphones, do not place the speaker of the radio directly against your ear. 2 English Medical Devices If you use a personal medical device, such as a pacemaker or hearing aid, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Operational Warnings The following explains the operational warnings:

For Vehicle With Air Bags Warning:

Refer to vehicle manufacturer's manual prior to installation of electronic equipment to avoid interference with air bag wiring. DO NOT place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Warning:

Use of a radio that is not intrinsically safe in a potentially explosive atmosphere could result in a serious injury or death. You should only use a certified Intrinsically Safe radio in potentially explosive atmospheres. Explosive atmospheres refer to hazard classified locations that may contain hazardous gas, vapors, dusts, such as fueling areas below decks on boats, fuel or chemical transferor storage facilities, and areas where the air contains chemicals or particles such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted. Turn off your radio prior to entering any area with a potentially explosive atmosphere unless it is a radio type specifically certified for use in hazardous location areas. DO NOT remove, install, or charge batteries in such areas, or remove or install antennas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. 3 English Blasting Caps and Blasting Areas Warning: To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: Turn off two-way radio. Obey all signs and instructions. Batteries Charge your battery using the approved Motorola Solutions charger. Use the battery in accordance with its water and/or dust Ingress Protection (IP) rating. Do not discard your battery into a fire. Do not replace the battery in any area labeled "Hazardous Atmosphere". Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery. Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven. Do not allow conductive material such as jewelry, keys, or beaded chains to touch exposed battery terminals. Repair Warning:

Repairs to a Motorola Solutions intrinsically safe radio product certified by, for example, FM, UL, CSA, CENELEC, should only be done at a location that has been audited under the certifying body's repair and service standard. Contact Motorola Solutions for assistance regarding repairs and service of Motorola Solutions intrinsically safe equipment. A repair constitutes something done internally to the unit that would bring it back to its original condition. Items not considered as repairs are those in which an action is performed on a unit which does not require the outer casing of the unit to be opened in a manner that exposes the internal electrical circuits of the unit. Do Not Substitute Options or Accessories The Motorola Solutions communications equipment certified as intrinsically safe by the approving agency (FM, UL, CSA, CENELEC) is tested as a complete system which consists of the listed agency Approved portable, Approved battery, and Approved accessories or options, or both. This Approved portable and battery combination must be strictly observed. There must be no substitution of items, even if the substitute has been previously Approved with a different Motorola Solutions 4 English communications equipment unit. Approved configurations are listed by the Approving Agency (FM, UL, CSA, CENELEC). The Intrinsically Safe Approval Label affixed to radio refers to the intrinsically safe classification of that radio product, and the approved batteries that can be used with that system. The manual PN referenced on the Intrinsically Safe Approval Label identifies the approved Accessories and or options that can be used with that portable radio unit. Using a non-Motorola Solutions-intrinsically safe battery and/or accessory with the Motorola Solutions approved radio unit will void the intrinsically safe approval of that radio unit. European Union(EU) Waste of Electrical and Electronic Equipment

(WEEE) Directive The European Union's WEEE directive requires that products sold into EU countries must have the crossed out trash bin label on the product (or the package in some cases). As defined by the WEEE directive, this cross-out trash bin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection system in their country. 5 Portugus (Brasil) Ateno Antes de usar o rdio, leia este folheto, que contm importantes instrues de operao. Para obter informaes sobre detalhes do produto, folhetos, manuais do usurio e acessrios aprovados. Consulte www.motorolasolutions.com. Conformidade com os Padres de Exposio RF Os regulamentos nacionais e internacionais exigem que os fabricantes estejam em conformidade com os limites de exposio energia de RF para rdios portteis bidirecionais antes de serem comercializados. O rdio bidirecional da Motorola Solutions foi projetado, fabricado e testado para estar em conformidade com todos os regulamentos nacionais e internacionais para exposio de seres humanos energia eletromagntica de radiofrequncia. Ao usar rdios bidirecionais por motivos de trabalho, os regulamentos aplicveis podem exigir que os usurios estejam totalmente conscientes e aptos a controlar sua exposio de modo a atender s exigncias ocupacionais. Informaes sobre Conscientizao e Controle de Exposio Energia de RF e Instrues Operacionais para o Uso Ocupacional Comunicado: Este rdio destina-se ao uso em condies ocupacionais/

controladas, em que os usurios estejam cientes de sua exposio e possam exercer controle sobre ela, para atender aos requisitos nos regulamentos nacionais e internacionais. O uso do dispositivo de rdio pela populao em geral no autorizado. Para obter mais informaes sobre a exposio energia de RF e como controlar a exposio para garantir a conformidade com os limites de exposio RF estabelecidos, acesse os seguintes sites:

https://www.fcc.gov/

https://www.osha.gov/

https://osha.europa.eu/en http://www.who.int/peh-emf/project/en/

Para informaes adicionais de treinamento sobre os requisitos de exposio, acesse os seguintes sites:

https://www.motorolasolutions.com/en_us/about/company-overview/corporate-

responsibility/governance-and-policies/wireless-communication-and-health-

faqs.html http://learning.motorolasolutions.com/

1 Portugus (Brasil) Diretrizes de Conformidade e Controle de Exposio RF Para controlar a exposio e garantir a conformidade com os limites de exposio RF em questo, siga sempre as diretrizes a seguir:

No remova as Etiquetas de Exposio RF, se houverem, do dispositivo ou acessrios relacionados. Anexe essas instrues ao dispositivo quando o transferir a outros usurios. No use este dispositivo se os requisitos operacionais descritos aqui no forem atendidos. Instrues Operacionais Transmita, no mximo, 50% do tempo. Para transmitir (falar), pressione o boto PTT (Push-To-Talk). Para receber chamadas, solte o boto PTT (Push-To-Talk). Transmitir mais de 50% do tempo pode fazer que os requisitos de conformidade de exposio RF sejam excedidos. Segure o rdio em posio vertical em frente ao rosto com o microfone (e outras partes do rdio incluindo a antena) a pelo menos 2,5 cm (1 polegada) de distncia do nariz ou dos lbios. A antena deve ficar longe dos olhos. Ao usar o rdio junto ao corpo, sempre o coloque em um prendedor, suporte, suporte para cinto ou estojo para este produto aprovado pela Motorola Solutions. NO segure a antena enquanto o rdio estiver transmitindo. NO utilize um rdio porttil com antena danificada. Se a antena danificada entrar em contato com sua pele, poder causar uma queimadura leve. Para garantir constantemente a conformidade com os limites aplicveis de exposio RF, use apenas antenas, baterias e acessrios de reposio aprovados ou fornecidos pela Motorola Solutions. Para obter uma lista dos acessrios aprovados pela Motorola Solutions, consulte o manual do usurio ou acesse www.motorolasolutions.com Segurana Acstica A exposio a rudos muito altos de qualquer origem por longos perodos pode prejudicar sua audio temporria ou permanentemente. Quanto maior for o volume do rdio, mais cedo sua audio ser prejudicada. s vezes, os danos auditivos causados por rudos fortes no so detectados em sua fase inicial, e podem ter efeito cumulativo. Para proteger sua audio, siga estas precaues:

Use o volume mais baixo necessrio para a execuo da sua tarefa. Aumente o volume somente se estiver em ambientes barulhentos. Reduza o volume antes de colocar um headset ou fones de ouvido. 2 Portugus (Brasil) Limite o tempo de utilizao de um headset ou fones de ouvido com volume alto. Ao usar o rdio sem o headset ou fones de ouvido, no coloque o alto-falante do rdio diretamente em contato com o ouvido. Equipamentos Mdicos Se voc usa um dispositivo mdico pessoal, como um marca-passo ou aparelho auditivo, consulte o fabricante do dispositivo para determinar se est adequadamente protegido contra energia de RF. Seu mdico pode ajud-lo a obter essas informaes. Avisos Operacionais A seguir so explicados os avisos operacionais:

Para Veculos Equipados com Air Bags Aviso:

Consulte o manual do fabricante do veculo antes de instalar equipamentos eletrnicos para evitar interferncia com o funcionamento do air bag. NO coloque um rdio porttil na rea sobre um air bag ou na rea de liberao do air bag. Os air bags inflam com muita fora. Se um rdio porttil estiver posicionado na rea de abertura do air bag e ele inflar, o rdio poder ser impelido com grande fora e causar graves ferimentos aos ocupantes do veculo. Ambientes Potencialmente Explosivos Aviso:

O uso de um rdio que no intrinsecamente seguro em um ambiente potencialmente explosivo poder resultar em danos graves e at em morte. Voc deve usar apenas rdios Intrinsecamente Seguros certificados em ambientes potencialmente explosivos. Ambientes potencialmente explosivos referem-se a locais classificados como de risco que podem conter gases, vapores ou ps nocivos, como reas de abastecimento embaixo do convs principal em barcos, instalaes de armazenamento ou transferncia de produtos qumicos ou combustvel e reas onde o ar contm partculas ou elementos qumicos, como fibras, poeira ou ps metlicos. As reas com ambientes potencialmente explosivos so frequentes, mas nem sempre h avisos sobre isso. Desligue o rdio antes de entrar em qualquer rea com ambientes potencialmente explosivos, a menos que o tipo de rdio seja especificamente certificado para utilizao em reas de risco. 3 Portugus (Brasil) NO remova, instale ou carregue baterias nessas reas, nem remova ou instale antenas. Fascas em um ambiente potencialmente explosivo podem causar uma exploso ou incndio que pode resultar em ferimentos e, at mesmo, morte. reas e Equipamentos para Detonao Aviso: Para evitar possveis interferncias em operaes de detonao, desligue o rdio quando estiver prximo a detonadores eltricos, reas de detonao ou reas onde haja avisos tais como: Desligue rdios bidirecionais. Obedea a todas as sinalizaes e instrues. Baterias Sempre carregue a bateria usando o carregador aprovado pela Motorola Solutions. Use a bateria de acordo com sua classificao de Proteo contra entrada (IP) de p e gua. No descarte a bateria no fogo. No troque a bateria em lugares identificados como "Atmosferas Potencialmente Perigosas". No desmonte, comprima, perfure, fragmente nem tente alterar de outra maneira a forma da bateria. No seque baterias molhadas nem midas usando aparelhos ou fontes de calor, como secadores de cabelo ou fornos de micro-ondas. No permita que materiais condutores como joias, chaves ou correntes toquem os terminais expostos da bateria. Reparo Aviso:

Reparos em rdios intrinsecamente seguros da Motorola Solutions certificados, por exemplo, por FM, UL, CSA, CENELEC, devem ser feitos apenas em um local que passou por auditoria de acordo com as normas de reparo e manuteno dos rgos certificadores. Entre em contato com a Motorola Solutions para obter assistncia sobre reparos e servios em equipamentos Motorola Solutions intrinsecamente seguros. Um reparo constitui algo sendo feito internamente na unidade que a retornar as suas condies originais. Os itens que no so considerados como reparos so os em que a ao realizada em uma unidade que no precisa que a parte externa seja aberta para expor os circuitos eltricos internos da unidade. 4 Portugus (Brasil) No Substitua Opes ou Acessrios O equipamento de comunicao Motorola Solutions certificado como intrinsecamente seguro pelos rgos de aprovao (FM, UL, CSA, CENELEC), testado como um sistema completo que consiste do porttil aprovado, bateria aprovada e acessrios e/ou opes aprovados pelo rgo listado. Essa combinao de porttil e bateria aprovada deve ser estritamente observada. No pode haver substituio de itens, mesmo se o substituto tiver sido aprovado previamente com um equipamento de comunicaes Motorola Solutions diferente. As configuraes aprovadas so listadas pelo rgo Aprovador (FM, UL, CSA, CENELEC). A Etiqueta de Aprovao de Intrinsecamente Seguro afixada ao rdio refere-se classificao de intrinsecamente seguro do rdio e da bateria aprovada que pode ser usada com o sistema. O PN manual referenciado na Etiqueta de Aprovao de Intrinsecamente Seguro identifica os acessrios ou opes aprovados que podem ser usados com a unidade de rdio porttil. O uso de uma bateria e/ou acessrio intrinsecamente seguro no Motorola Solutions com a unidade de rdio aprovada pela Motorola Solutions invalidar a aprovao de segurana intrnseca da unidade de rdio. Diretiva de Resduos de Equipamentos Eltricos e Eletrnicos

(WEEE) para a Unio Europeia (UE) A Diretiva de WEEE da Unio Europeia exige que os produtos vendidos nos pases da UE tenham a etiqueta de lixeira riscada no produto (ou no pacote, em alguns casos). Conforme definido pela diretiva WEEE, essa etiqueta de lixeira cruzada indica que os clientes e os usurios nos pases da UE no devem descartar equipamentos ou acessrios eltricos ou eletrnicos em lixo domstico. Os clientes ou os usurios nos pases da UE devem entrar em contato com o representante local do fornecedor do equipamento ou com a central de servios para obter informaes sobre o sistema de coleta de lixo em seu pas. 5 Franais (Canada) Mise en garde Avant d'utiliser cette radio, lisez cette brochure qui contient d'importantes consignes d'utilisation. Pour obtenir plus dinformation sur les dtails du produit, les brochures, les manuels et les accessoires approuvs : Veuillez vous reporter www.motorolasolutions.com. Conformit aux normes sur l'exposition aux radiofrquences Les rglementations nationales et internationales noncent que les fabricants de radios bidirectionnelles portatives doivent sassurer que celles-ci sont conformes aux limites dexposition l'nergie RF avant de les commercialiser. Cette radio bidirectionnelle Motorola Solutions a t conue, fabrique et teste afin de garantir sa conformit aux normes nationales et internationales lies l'exposition des tres humains l'nergie lectromagntique de radiofrquence. Lorsque les radios bidirectionnelles sont utilises des fins professionnelles, la rglementation en vigueur exige que les utilisateurs soient pleinement conscients des effets de l'exposition et qu'ils soient capables de contrler le niveau d'exposition auquel ils se soumettent afin de rpondre aux exigences de leur profession. Information de sensibilisation et de gestion de l'exposition l'nergie RF, et consignes pour l'usage professionnel Avis: Cette radio a t conue pour un usage professionnel dans un environnement contrl, o les utilisateurs sont pleinement conscients de l'exposition l'nergie RF laquelle ils sont soumis et peuvent exercer un contrle sur cette exposition afin de respecter les limites tablies par les rglements nationaux et internationaux. Ce dispositif radio n'est pas autoris pour l'utilisation grand public par des consommateurs ordinaires. Visitez les sites Web suivants pour obtenir plus de renseignements sur ce qu'est l'nergie RF et sur les moyens de contrle prendre afin de respecter les limites tablies en matire d'exposition aux radiofrquences. https://www.fcc.gov/

https://www.osha.gov/

https://osha.europa.eu/en http://www.who.int/peh-emf/project/en/

Pour plus de renseignements sur la formation des utilisateurs relativement aux limites d'exposition, consultez les sites suivants :

https://www.motorolasolutions.com/en_us/about/company-overview/corporate-

responsibility/governance-and-policies/wireless-communication-and-health-

faqs.html http://learning.motorolasolutions.com/

1 Franais (Canada) Directives de conformit et de contrle de l'exposition aux RF Pour contrler votre exposition et garantir le respect des limites d'exposition applicables, observez toujours les consignes suivantes. Ne pas retirer les tiquettes relatives l'exposition aux RF qui sont apposes sur cet appareil ou sur ses accessoires. Joignez ces directives l'appareil lorsque vous le transfrez d'autres utilisateurs. N'utilisez pas cet appareil si les conditions de fonctionnement dcrites aux prsentes ne sont pas runies. Consignes dutilisation Ne pas mettre plus de 50 % du temps. Pour transmettre (parler), appuyez sur le bouton Push-to-talk (PTT). Pour recevoir les appels, relchez le bouton PTT. Le fait de transmettre plus de 50 % du temps peut entraner le dpassement de la limite dexposition normalise au rayonnement RF. Tenez la radio la verticale devant le visage, en maintenant une distance dau moins 2,5 centimtres (1 pouce) entre le micro (et les autres parties de la radio, y compris lantenne) et le nez ou les lvres. Lantenne doit tre maintenue loin des yeux. Lorsque vous portez la radio sur vous, fixez-la toujours avec une pince ou une attache de ceinture et placez-la dans un tui ou un harnais approuv par Motorola Solutions pour l'utilisation avec ce produit. NE TENEZ PAS lantenne entre vos doigts pendant que la radio met. N'UTILISEZ PAS une radio portative, quelle quelle soit, dont lantenne est endommage. Si une antenne endommage entre en contact avec votre peau, il peut en rsulter une brlure lgre. Pour assurer la conformit continue avec les limites d'exposition aux RF applicables, utilisez uniquement les antennes, les batteries et les accessoires de remplacement ou fournis et approuvs par Motorola Solutions. Pour obtenir une liste des accessoires approuvs par Motorola Solutions, veuillez consulter votre manuel ou visitez le site www.motorolasolutions.com Protection de l'oue Une exposition des bruits forts en provenance de n'importe quelle source pendant de longues priodes pourrait affecter votre audition de manire temporaire ou permanente. Plus le volume de la radio est lev, plus le dommage pour l'oue survient rapidement. Des dommages auditifs dus l'exposition des bruits forts peuvent ne pas tre dcels immdiatement, mais leurs effets sont parfois cumulatifs. Pour protger votre oue, suivez ces instructions:

2 Franais (Canada) Rglez le volume le plus bas possible pour effectuer votre travail. Montez le volume seulement si vous vous trouvez dans un environnement bruyant. Baissez le volume avant d'ajouter un casque ou un couteur. Limitez la dure d'utilisation de votre casque ou de votre couteur un volume lev. Lorsque vous utilisez la radio sans casque ni couteur, ne placez pas le haut-

parleur de la radio directement sur votre oreille. Appareils mdicaux Si vous utilisez un dispositif mdical personnel, comme un stimulateur cardiaque ou une prothse auditive, consultez le fabricant de votre appareil pour dterminer s'il est convenablement protg contre les RF. Votre mdecin peut vous aider obtenir ces renseignements. Avertissements de fonctionnement Le tableau suivant explique les avertissements de fonctionnement :

Pour vhicules quips de coussins gonflables Avertissement:

Consultez le manuel du fabricant du vhicule avant d'installer un appareil lectronique, afin d'viter toute interfrence avec le cblage des coussins gonflables. NE PLACEZ PAS de radio portative dans la zone situe au-dessus d'un coussin gonflable ou dans la zone de dploiement de ce dernier. Un coussin gonflable de scurit se dploie avec beaucoup de force. Si une radio portative se trouve dans la zone de dploiement du coussin, lorsque celui-ci se gonfle, la radio peut tre propulse avec une force considrable et risque alors d'occasionner de graves lsions corporelles aux passagers du vhicule. Atmosphres potentiellement explosives Avertissement:

L'utilisation d'une radio autre qu'une radio scurit intrinsque dans une atmosphre potentiellement explosive est susceptible d'entraner des blessures graves ou la mort. Vous ne devez pas utiliser de radio de scurit intrinsque agre dans des atmosphres potentiellement explosives. On retrouve des atmosphres explosives dans les lieux classs comme tant dangereux en raison de la prsence de gaz, de vapeurs et de poussires reprsentant un danger, par exemple, les zones 3 Franais (Canada) d'avitaillement en carburant dans des cales de bateau, les installations de transfert et de stockage de carburant ou de produits chimiques, et les zones dans lesquelles l'air est charg en produits chimiques ou en particules telles que de la poudre de crales, de la poussire ou de la poudre mtallique. Les zones atmosphres potentiellement explosives affichent gnralement des panneaux de mise en garde, mais ce n'est pas toujours le cas. teignez la radio avant d'accder un lieu prsentant une atmosphre potentiellement explosive, moins qu'il s'agisse d'un type de radio certifi spcifiquement pour une utilisation dans des zones dangereuses. VITEZ d'enlever, d'installer ou de charger les batteries, ou d'enlever ou d'installer des antennes dans de tels lieux. Les tincelles dans des atmosphres potentiellement explosives peuvent provoquer une explosion ou un incendie et entraner des lsions corporelles, voire la mort. Zone de dynamitage et dtonateurs Avertissement: teignez la radio lorsque vous vous trouvez proximit de dtonateurs lectriques ou dans une zone de dynamitage afin dviter de dclencher une explosion, ou lorsque vous vous trouvez dans un endroit o il est indiqu : teindre les radios bidirectionnelles . Respectez tous les panneaux et toutes les consignes. Batteries Chargez votre batterie l'aide du chargeur approuv par Motorola Solutions. Utilisez la batterie conformment son indice de protection (IP) contre l'eau et la poussire. Ne jetez pas votre batterie au feu. Ne remplacez pas la batterie dans un endroit qui porte la mention atmosphre dangereuse . Veillez ne pas dmonter, craser, percer, dcouper ou autrement modifier la forme de votre batterie. Ne faites pas scher une batterie mouille ou humide avec un appareil lectrique ou une source de chaleur, comme un schoir cheveux ou un four micro-

ondes. Ne permettez pas des matriaux conducteurs, comme des bijoux, des cls ou des mailles de chane dentrer en contact avec les bornes de la batterie. 4 Franais (Canada) Rparation Avertissement:

La rparation d'une radio de scurit intrinsque de Motorola Solutions homologue, notamment, par FM, UL, CSA ou CENELEC, doit tre effectue uniquement un endroit ayant fait l'objet d'une vrification en vertu de la norme sur les rparations et l'entretien de l'organisme de certification. Contactez Motorola Solutions afin d'obtenir de l'assistance pour l'entretien et la rparation d'une unit Motorola Solutions scurit intrinsque. Le terme rparation dsigne tout travail effectu sur les composants internes de l'unit afin de la ramener son tat d'origine. Un travail qui ne ncessite pas l'ouverture du botier de l'unit afin d'en exposer les circuits lectriques internes ne constitue pas une rparation. vitez de substituer des options ou des accessoires. L'quipement de communications Motorola Solutions certifi de scurit intrinsque par l'entit d'homologation (FMRC, UL, CSA, CENELEC) est test en tant que systme complet, savoir : la radio portative, la batterie, les accessoires et les options, tous agrs par l'entit correspondante. L'intgrit de cette configuration forme d'une radio portative et d'une batterie agres doit tre strictement respecte. Aucune substitution d'lment n'est permise, mme si l'lment de remplacement a pralablement t agr pour une autre unit de communication Motorola Solutions. Les configurations agres peuvent tre consultes dans la liste mise disposition par l'entit d'homologation (FMRC, UL, CSA, CENELEC). L'tiquette d'homologation de scurit intrinsque appose sur la radio identifie la classification de scurit intrinsque de cette radio ainsi que les batteries agres qui peuvent tre utilises avec ce systme. Le numro de rfrence du manuel mentionn sur l'tiquette d'homologation de scurit intrinsque identifie les accessoires et/ou les options agrs qui peuvent tre utiliss avec cette unit de radio portative. Le fait de ne pas utiliser une batterie ou un accessoire Motorola Solutions de scurit intrinsque avec l'unit de radio Motorola Solutions agre annule l'homologation de scurit intrinsque de cette unit de radio. Directive sur la mise au rebut des quipements lectriques et lectroniques de l'Union europenne (UE) (WEEE) La directive WEEE de l'Union europenne exige que les produits vendus dans les pays de l'UE portent l'tiquette de la poubelle barre (ou leur emballage, dans 5 Franais (Canada) certains cas). Comme le dfinit la directive WEEE, cette tiquette de poubelle barre signifie que les clients et les utilisateurs finaux dans les pays de l'UE ne doivent pas jeter les quipements lectriques et lectroniques ou leurs accessoires dans les ordures domestiques. Les clients ou les utilisateurs finaux dans les pays de l'UE doivent communiquer avec le reprsentant ou le centre de service de leur fournisseur d'quipement pour obtenir des renseignements sur le systme de collecte des dchets de leur pays. 6 Espaol (Latinoamrica) Precaucin Antes de usar este radio, lea el folleto que contiene instrucciones de funcionamiento importantes. Para obtener informacin sobre los detalles del producto, folletos, manuales de usuario y accesorios aprobados, consulte www.motorolasolutions.com. Conformidad con las normas sobre exposicin a la radiofrecuencia Las regulaciones nacionales e internacionales obligan a que los fabricantes cumplan con los lmites de exposicin a energa de radiofrecuencia para radios mviles de dos vas antes de que se puedan comercializar. El radio de dos vas Motorola Solutions est diseado, fabricado y probado para cumplir con todas las regulaciones nacionales e internacionales correspondientes en materia de exposicin humana a la energa electromagntica de radiofrecuencia. Cuando los radios de dos vas se usan para trabajar, las regulaciones correspondientes podran exigir que los usuarios conozcan y controlen su nivel de exposicin para cumplir con los requisitos de uso profesional. Conocimiento de la exposicin a energa de radiofrecuencia, informacin de control e instrucciones de funcionamiento para uso ocupacional Nota: Este radio est diseado para usarse en condiciones controladas o profesionales, donde los usuarios tengan pleno conocimiento de su exposicin y puedan controlarla con el fin de cumplir con los requisitos de las regulaciones nacionales e internacionales. Este dispositivo de radio no est autorizado para el uso particular de la poblacin en general. Para obtener ms informacin sobre el significado de la exposicin a energa de radiofrecuencia y cmo controlar la exposicin con el fin de asegurar el cumplimiento de los lmites de exposicin a radiofrecuencias establecidos, consulte los siguientes sitios web:

https://www.fcc.gov/

https://www.osha.gov/

https://osha.europa.eu/en http://www.who.int/peh-emf/project/en/

Para obtener informacin adicional de la capacitacin de los usuarios sobre los requisitos de exposicin, consulte los siguientes sitios web:

https://www.motorolasolutions.com/en_us/about/company-overview/corporate-

responsibility/governance-and-policies/wireless-communication-and-health-

faqs.html 1 Espaol (Latinoamrica) http://learning.motorolasolutions.com/

Cumplimiento de exposicin a radiofrecuencia y pautas de control Para controlar la exposicin y garantizar el cumplimiento de los lmites de exposicin a radiofrecuencias correspondientes, respete siempre las siguientes pautas:

No retire ninguna de las etiquetas de exposicin a radiofrecuencias, si las hubiere, de este dispositivo o sus accesorios respectivos. Adjunte estas instrucciones al dispositivo cuando se lo transfiera a otros usuarios. No utilice este dispositivo si no se cumple con los requisitos de funcionamiento descritos en este documento. Instrucciones de funcionamiento No transmita ms de un 50 % del tiempo. Para transmitir (hablar), presione el botn Push to Talk (PTT). Para recibir llamadas, suelte el botn PTT. Una transmisin superior al 50 % del tiempo de uso podra provocar que se superen los requisitos de cumplimiento de exposicin a radiofrecuencia. Sostenga el radio en posicin vertical frente a su rostro con el micrfono (y otras partes del radio, incluida la antena) al menos a 1 pulgada (2,5 cm) de distancia de la nariz o los labios. Mantenga la antena alejada de los ojos. Siempre que use el radio ajustado al cuerpo, pngalo en un clip, un soporte, un estuche, una funda o un arns para el cuerpo aprobado por Motorola Solutions para este producto. NO sujete la antena mientras el radio est realizando una transmisin. No utilice radios porttiles que tengan la antena daada. Si una antena daada toca su piel, puede causar una pequea quemadura. Para garantizar el cumplimiento continuo de los lmites de exposicin a radiofrecuencia correspondientes, utilice solamente las antenas, las bateras y los accesorios de repuesto suministrados o aprobados por Motorola Solutions. Para obtener una lista de los accesorios aprobados por Motorola Solutions, consulte el manual del usuario o visite www.motorolasolutions.com. Seguridad acstica La exposicin a ruidos fuertes de cualquier fuente durante perodos prolongados podra afectar la audicin de manera temporal o permanente. Cuanto ms alto sea el volumen del radio, ms rpido se ver afectada la audicin. En ocasiones, el dao a la audicin provocado por ruidos fuertes es indetectable en un principio y puede tener efecto acumulativo. Para proteger la audicin, siga estas precauciones:

2 Espaol (Latinoamrica) Utilice el volumen ms bajo que necesite para hacer su trabajo. Aumente el volumen solo si se encuentra en un ambiente ruidoso. Reduzca el volumen antes de conectar auriculares o audfonos. Limite el tiempo durante el cual utiliza auriculares o audfonos a volumen alto. Cuando use el radio sin auriculares o audfonos, no coloque el altavoz del radio directamente en la oreja. Aparatos mdicos Si utiliza un dispositivo mdico, como un marcapasos o una prtesis auditiva, consulte al fabricante del dispositivo para determinar si est adecuadamente protegido contra las energas de radiofrecuencia. Su mdico podra ayudarlo a obtener esta informacin. Advertencias de funcionamiento A continuacin, se explican las advertencias de funcionamiento:

Para vehculos con airbags Advertencia:

Consulte el manual del fabricante del vehculo antes de instalar equipos electrnicos, a fin de evitar la interferencia con el cableado de las bolsas de aire. NO coloque el radio porttil sobre una bolsa de aire ni en el rea de despliegue de la bolsa. Las bolsas de aire se inflan con mucha fuerza. Si se pone un radio porttil en el rea de despliegue de la bolsa de aire y esta se infla, es posible que el radio salga disparado con gran fuerza y cause lesiones graves a los ocupantes del vehculo. Atmsferas potencialmente explosivas Advertencia:

El uso de un radio que no sea intrnsecamente seguro en una atmsfera potencialmente explosiva puede provocar lesiones graves o la muerte. En atmsferas potencialmente explosivas, debe utilizar solamente un radio intrnsecamente seguro certificado. El trmino atmsferas explosivas se refiere a lugares clasificados como peligrosos en los que podra haber gases, vapores o polvos peligrosos, como reas con combustibles bajo las cubiertas de los botes o instalaciones de almacenamiento o transferencia de qumicos, y reas en que el aire contenga productos qumicos o partculas, como material granulado, polvo o polvo metlico. En las reas con atmsferas potencialmente explosivas generalmente hay seales de precaucin, aunque no siempre es as. 3 Espaol (Latinoamrica) Apague el radio antes de ingresar a cualquier rea que posea una atmsfera potencialmente explosiva, a menos que se trate de un tipo de radio certificado especficamente para ser usado en zonas de ubicaciones peligrosas. NO retire, instale ni cargue bateras, ni tampoco retire o instale antenas en dichas reas. Las chispas en ambientes potencialmente explosivos pueden desencadenar una explosin o un incendio, y ocasionar lesiones o incluso la muerte. reas de voladuras y explosivos Advertencia: Para evitar posibles interferencias con operaciones de voladuras, apague el radio cuando se encuentre cerca de zonas de voladuras elctricas, en un rea de explosivos o en reas donde se encuentre el siguiente aviso: Apague el radio de dos vas. Obedezca todas las seales e instrucciones. Bateras Cargue la batera con cargadores aprobados por Motorola Solutions. Utilice la batera de acuerdo con su clasificacin de proteccin de ingreso (IP) contra polvo y agua. No arroje la batera al fuego. No cambie la batera en un rea designada como Atmsfera peligrosa. No desarme, rompa, perfore, triture ni intente cambiar de ningn otro modo la forma de la batera. No intente secar una batera mojada o hmeda con un electrodomstico o una fuente de calor externa, como un secador de pelo o un horno microondas. No permita que materiales conductores como joyas, llaves o cadenas hagan contacto con los terminales expuestos de la batera. Reparacin Advertencia:

Las reparaciones de productos de un radio Motorola Solutions intrnsecamente seguro certificado, por ejemplo, FM, UL, CSA, CENELEC, deben realizarse solo en una ubicacin que haya sido auditada segn el estndar de reparacin y servicio de la entidad certificante. Comunquese con Motorola Solutions para solicitar asistencia relacionada con reparaciones y tareas de servicio de los equipos Motorola Solutions intrnsecamente seguros. Una reparacin consta de algo hecho en el interior de la unidad que debe devolverla a su estado original. 4 Espaol (Latinoamrica) Las instancias que no se consideran reparaciones son las que incluyen una accin realizada en una unidad que no requiere que la cubierta externa se abra de manera tal que queden expuestos los circuitos elctricos de la unidad. No sustituya los elementos opcionales ni los accesorios Los equipos de comunicaciones de Motorola Solutions que cuentan con un certificado que indica que son intrnsecamente seguros, emitido por una agencia de aprobacin (FM, UL, CSA, CENELEC), se prueban como sistemas completos que incluyen: el dispositivo porttil aprobado, la batera aprobada y los accesorios o los elementos opcionales aprobados, o ambos. Debe respetar de manera estricta esta combinacin de dispositivo porttil y batera aprobada. No se deben sustituir los elementos, aun si la pieza de sustitucin se prob anteriormente para otro equipo de comunicaciones Motorola Solutions. Las configuraciones aprobadas son detalladas por la agencia de aprobacin (FM, UL, CSA, CENELEC). La etiqueta de aprobacin como intrnsecamente seguro adherida al radio indica la clasificacin de intrnsecamente seguro de ese radio e indica las bateras aprobadas que pueden usarse con ese sistema. La etiqueta de aprobacin de intrnsecamente seguro adherida al radio hace referencia a un nmero de pieza del manual que indica los accesorios o los elementos opcionales que se pueden usar con la unidad de radio porttil. El uso de una batera o un accesorio aprobado como intrnsecamente seguro que no sea de Motorola Solutions con el radio Motorola Solutions aprobado anular la aprobacin de intrnsecamente seguro de esa unidad de radio. Directiva de Residuos de Aparatos Elctricos y Electrnicos

(RAEE) de la Unin Europea (UE) La Directiva RAEE de la Unin Europea requiere que los productos que se venden en los pases de la UE tengan la etiqueta de un bote de residuos tachado sobre el producto (o en el paquete, en algunos casos). Como define la directiva RAEE, esta etiqueta con un bote de basura tachado indica que los clientes y los usuarios finales en los pases de la UE no deben deshacerse de los equipos o accesorios elctricos y electrnicos con la basura domstica. Los clientes o los usuarios finales en los pases de la UE deben ponerse en contacto con su representante distribuidor de equipos o el centro de servicio locales para obtener informacin sobre el sistema de recoleccin de residuos de su pas. 5 MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2007 and 2017 Motorola Solutions, Inc. All rights reserved. Printed in

*NNTN7223J*

NNTN7223J

*6881095C98*

6881095C98-LB

2000044_CLP_en.book Page 1 Thursday, November 9, 2017 6:40 PM CLP Series Two-Way RadioTM User Guide Model CLP1010, CLP1040, and CLP1060 (with Bluetooth Wireless Technology) 2000044_CLP_en.book Page 2 Thursday, November 9, 2017 6:40 PM Document Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola Solutions. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola Solutions. Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola Solutions reserves the right to make changes to any products herein to improve readability, function, or design. Motorola Solutions does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others. 2000044_CLP_en.book Page i Thursday, November 9, 2017 6:40 PM C O N T E N T S Declaration of Conformity . v Computer Software Copyrights . iii Radio Frequency (RF) Exposure Safety Standards. iv Product Safety and RF Exposure Compli-

ance . iv FCC Licensing Information . v Notice to users (fcc and industry canada). v Introduction . 1 Radio Overview . 2 Radio Controls. 2 Getting Started . 3 Install The Battery . 3 Connecting a Wired Audio Accessory. 4 Connecting a Bluetooth Wireless Accessory

(Select Models Only). 5 Add Bluetooth Headset (Initial Pairing). 5 Reconnect to Last Connected Bluetooth Headset. 5 Erase Bluetooth Headset History and Add Bluetooth Headset . 5 Turning the Radio On and Off . 6 Adjusting the Volume. 6 Installing and Removing the Swivel Belt Clip Holster . 6 Transmitting and Receiving . 7 Operation with Menu Settings . 8 Selecting a Channel. 9 Monitoring a Channel. 10 Scanning . 10 Dynamic Talkaround Scan (*) . 11 Sending Call Tone (enabled through CPS) . 11 Mute Feature (*). 11 Talk Permit Tone (*). 11 Battery and Charger Features. 12 Battery Features. 12 About the Li-Ion Battery . 12 Battery Recycling and Disposal . 13 Removing the Lithium-Ion (Li-Ion) Battery . 14 Power Supply, Adapter and Drop-in Tray i 2000044_CLP_en.book Page ii Thursday, November 9, 2017 6:40 PM Advanced Radio Configuration (*) . 28 Entering Advanced Radio Configuration Mode . 28 Troubleshooting. 29 Use and Care . 33 Radio Frequency and Code Charts . 34 Motorola Solutions Limited Warranty for the United States and Canada. 38 Accessories . 43 Audio Accessories . 43 Batteries . 43 Carry Accessories . 43 Chargers . 43 Programming Cables . 43 S T N E T N O C Charger. 14 Charging a Standalone Battery. 15 Charging the Bluetooth Headset. 18 Checking Battery Status . 18 Batteries and Chargers Safety Information. 19 Operational Safety Guidelines . 20 Programming The Radio Through the CPS. 21 Downloading the (Customer Programming Software) CPS . 21 Radio Cloning . 24 Cloning Radio Settings . 24 Cloning Instructions. 24 Cloning Radios using the CLP Series Clon-

ing Cable Kit P/N HKKN4026 (optional ac-

cessory) . 24 Cloning Radios using the CLP Series Multi-

Unit Charger (MUC) Kit P/N HKPN4007

(optional accessory) . 27 ii I I F O N O T A R A L C E D Y T M R O F N O C 2000044_CLP_en.book Page v Thursday, November 9, 2017 6:40 PM DECLARATION OF CONFORMITY This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 500 W. Monroe Street, Chicago, Illinois 60661, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product:

Model Name: CLP1000 Series conforms to the following regulations:

FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) v 2000044_CLP_en.book Page vi Thursday, November 9, 2017 6:40 PM Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Notice:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and Canada license-exempt RSS standard. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. vi C O N F O R M T Y D E C L A R A T O N O F I I 2000044_CLP_en.book Page iii Thursday, November 9, 2017 6:40 PM Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppels, or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal non-

exclusive license to use that arises by operation of law in the sale of a product. COMPUTER SOFTWARE COPYRIGHTS The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola Solutions. iii C O P Y R G H T S I C O M P U T E R S O F T W A R E 2000044_CLP_en.book Page iv Thursday, November 9, 2017 6:40 PM For a list of Motorola Solutions-approved antennas, batteries, and other accessories, visit the following website: www.motorolasolutions.com/CLP RADIO FREQUENCY (RF) EXPOSURE SAFETY STANDARDS Product Safety and RF Exposure Compliance Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet contained with your radio. C a u t i o n ATTENTION!

This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Solutions Publication part number 6881095C98) to ensure compliance with RF energy exposure limits. iv S D R A D N A T S Y T E F A S F R 2000044_CLP_en.book Page v Thursday, November 9, 2017 6:40 PM FCC LICENSING INFORMATION NOTICE TO USERS (FCC) This device complies with Part 15 of the FCC rules per the following conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment. The CLP Series radio operates on radio frequencies that are regulated by the Federal Communications Commission (FCC). To transmit on these frequencies, you are required to have a license issued by the FCC. Application is made available on FCC Form 601 and Schedules D, H, and Remittance Form 159. To obtain these FCC forms, request document 000601 which includes all forms and instructions. If you wish to have the document faxed, mailed or have questions, use the following contact information. Faxed: Contact the Fax-On-

Demand system at:

Mailed: Call the FCC forms hotline at:

For questions regarding FCC license, contact the FCC at:

1-202-418-0177 1-800-418-FORM 1-800-418-3676 1-888-CALL-FCC 1-888-225-5322 Or: http://www.fcc.gov v I I N F O R M A T O N F C C L C E N S N G I I I I G N S N E C L C C F N O T A M R O F N I I 2000044_CLP_en.book Page vi Thursday, November 9, 2017 6:40 PM Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited. Before filling out your application, you must decide which frequency(ies) you can operate on: Radio Frequency and Code Charts on page 34. For questions on determining the radio frequency, call Motorola Solutions Product Services at: 1-800-448-

6686. Changes or modifications not expressly approved by Motorola Solutions may void the users authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. vi 2000044_CLP_en.book Page 1 Thursday, November 9, 2017 6:40 PM INTRODUCTION Thank you for purchasing a Motorola Solutions CLP Series Two-Way Radio. Your radio is a product of Motorola Solutions 80 plus years of experience as a world leader in designing and manufacturing communications equipment. The CLP Series radios provide cost-effective efficient communications for businesses such as retail stores, restaurants, hotels, and schools. Motorola Solutions professional two-way radios are the perfect communications solution for all of todays fast-paced industries. Please read this guide carefully so you know how to properly operate the radio before use. PACKAGE CONTENTS Your product package contains the following products and manuals:

CLP Series Two-way Radio Swivel Belt Clip Holster Lithium Ion Battery and Battery Door Drop-In Tray Charger with Transformer Audio Accessory User Quick Reference, Chargers Instructions Leaflet, RF Safety Booklet Warranty Card For product information, visit us at:

www.motorolasolutions.com/CLP For product-related questions, contact:

1-800-448- 6686 in the USA 1-800-461-4575 in Canada 1-866-522-5210 on your TTY (Text Telephone) I N T R O D U C T O N I This user guide covers the following CLP Series models (*):

Model CLP1010 CLP1040 CLP1060 Frequency Band Transmit Power No. of Channels Bluetooth Repeater Capability UHF UHF UHF 1 W 1 W 1 W 1 4 6 No No Yes Yes Yes Yes Note:

Certain models may or may not be available at the time of purchase. 1 2000044_CLP_en.book Page 2 Thursday, November 9, 2017 6:40 PM RADIO OVERVIEW RADIO CONTROLS Power/Battery Button Volume Control (+/-) 2 Accessory Connector Menu Button Smart Status Glow Push-to-Talk

(PTT) Button I W E V R E V O O D A R I 2000044_CLP_en.book Page 3 Thursday, November 9, 2017 6:40 PM GETTING STARTED INSTALL THE BATTERY 1. Push the latch up at the bottom of the battery door and lift the battery door off the radio. 2. 3. Align the battery contacts with tabs in the battery compartment. Insert the contact side of the battery first, then press the battery down to secure in place. Put the battery door back on the radio. Push the latch down to lock. Note:

The CLP Series radios standard packaged models come with standard Lithium Ion battery and the standard Lithium Ion battery door. For option, customers can order Hi-capacity Lithium Ion battery (P/N HKNN4013) and the Hi-capacity Lithium Ion battery door (P/N HKLN4440). 3 I R A D O O V E R V E W I 2000044_CLP_en.book Page 4 Thursday, November 9, 2017 6:40 PM Connecting a Wired Audio Accessory Connect the wired audio accessory. 3. Plug the audio accessory straight into the accessory connector on the radio. Screw the audio accessory plug into the connector until it is tight and fully engaged with the connector. 1. 2. Turn the radio OFF. Remove the accessory connector cover

(applicable on bluetooth enabled models only). 4. Note:

Turn the radio ON. Press either the Battery Status, Menu or Volume Control button to check for audio through the audio accessory. The CLP Series radios offer a variety of audio accessories. For detailed Audio Accessories List, please refer to www.motorolasolutions.com/CLP for information on approved accessories. Lower the radio volume BEFORE placing the audio accessory in or near your ear. 4 I W E V R E V O O D A R I 2000044_CLP_en.book Page 5 Thursday, November 9, 2017 6:40 PM CONNECTING A BLUETOOTH WIRELESS ACCESSORY (SELECT MODELS ONLY) Add Bluetooth Headset (Initial Pairing) 1. 2. Turn the radio OFF. Put Bluetooth headset in pairing mode. Refer to your Bluetooth headset instructions leaflet. Press and hold the PTT button and power button simultaneously until radio shows the blue LED. 3. LED Configuration Color User Mode Bluetooth Pairing Mode Pairing Successfully Bluetooth Disconnected Pairing Fail/

Timeout LED Status Last connection Fast blinking blue Add or erase/

add Solid blue Blue/purple blinks for 5 seconds Red/purple blinks until the radio reconnects Red/purple blinks until radio reconnects Note:

The Bluetooth feature is disabled when the wired audio accessory is plugged into the accessory connector on the CLP radio. Reconnect to Last Connected Bluetooth Headset 1. 2. Turn the radio OFF. Press the power button to turn the radio ON.

(Make sure the Bluetooth headset is turned ON). Erase Bluetooth Headset History and Add Bluetooth Headset Turn the radio OFF. 1. 2. Put the Bluetooth headset in pairing mode. Refer to your Bluetooth headset instructions leaflet. Press and hold the Menu button and power button simultaneously until radio shows the blue LED. 3. Note:

The CLP radio uses proximity pairing. Make sure the headset is close enough to the CLP radio. Pairing process takes about 14 seconds. I R A D O O V E R V E W I 5 2000044_CLP_en.book Page 6 Thursday, November 9, 2017 6:40 PM 4. Make a small loop in the cord. Pass the cord through the cord guide, nest the cord in the U-shaped groove. Pull tight to lock the cord in place. Cord Guide U-Shaped Groove 5. Turn the belt clip to the position as needed. Turning the Radio On and Off To turn the radio ON, press and hold the Power/

Battery button until you hear a short tone and the Smart Status Glow lights up. To turn it OFF, press and hold the button until you hear a short tone and the Smart Status Glow

(red) indicator blinks once. Adjusting the Volume Turn the radio ON and set volume level by pressing volume control (+/- button). A total of 16 volume levels are available. Installing and Removing the Swivel Belt Clip Holster 1. 2. Slide the bottom of the radio into the holster. Snap the top of the holster into the radio around the accessory connector. To remove the holster, pull either the top or bottom tab(s) and pull the radio from the holster. 3. Note:

When using a corded audio accessory, loop the cord into the recess in the rear of the holster for optimal plug retention. 6 Note:

The CLP Series radios offer a variety of flexible carrying accessories. For detailed Carrying Accessories List, please refer to www.motorolasolutions.com/CLP for information on approved accessories. I W E V R E V O O D A R I 2000044_CLP_en.book Page 7 Thursday, November 9, 2017 6:40 PM TRANSMITTING AND RECEIVING 1. To talk, press and hold the PTT button on the front of the radio (or on select wired audio accessories with an inline PTT). Speak clearly into the microphone on the audio accessory. When finished talking, release the PTT to listen. To receive, listen through the earpiece at the volume level you have set. Press the PTT to respond. 2. Note:

The CLP Series radios always require the use of an audio accessory with microphone and speaker. Talk Range Industrial Multi-Level Application Unit to Unit With Repeater Inside steel/

concrete industrial buildings Up to 100,000 square feet Up to 250,000 square feet Inside Multi-

Level Buildings Up to 10 floors Up to 20 floors I R A D O O V E R V E W I 7 2000044_CLP_en.book Page 8 Thursday, November 9, 2017 6:40 PM OPERATION WITH MENU SETTINGS Press Menu button to navigate through the Menu settings. At any time in Menu mode, short press PTT or wait 3 seconds to exit the menu. Voice Assisted Operation feature may not be available on certain previous shipping radios. HOW TO... STEP 1 STEP 2 Change Channel Press Menu button to navigate to Channel. Enter Monitor Mode Press Menu button to navigate to Monitor. Enter Scan Mode Press Menu button to navigate to Scan. Send Call Tone (enabled through CPS) Press Menu button to navigate to Call Tone. Press +/- button to change channel. Press +/- button to activate or deactivate Monitor. Press +/- button to activate or deactivate Scan. Press +/- button to send Call Tone. Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button press. Note: For single channel models, Monitor, Scan Mode and Call Tone are supported. Single channel models support Scan mode when the user enables Dynamic Talkaround Scan on a repeater channel via the customer programming software. 8 I W E V R E V O O D A R I 2000044_CLP_en.book Page 9 Thursday, November 9, 2017 6:40 PM Selecting a Channel For CLP multi-channel models only:

1. When powered ON, press the Menu button, you

[Color] Channel [Channel#] To change press +/-

Select the channel you want. The LED reflects the color of the new channel. Press PTT button to confirm or it is activated after 3 second hang time. Default Channel Settings for CPS 2. can hear the voice prompt:

CLP1010 Single-Channel Models CLP1040 Multi-Channel Models CLP1060 Multi-

Channel Models Channel LED Status Color Channel LED Status Color Channel LED Status 1 Red 1 2 3 4 Red Green Yellow Blue 1 2 3 4 5 6 Color Red Green Yellow Blue Purple White 9 I R A D O O V E R V E W I 2000044_CLP_en.book Page 10 Thursday, November 9, 2017 6:40 PM Monitoring a Channel 1. To activate, press the Menu button to navigate to Monitor mode. 3. 2. When Monitor is OFF, you can hear the voice prompt: Monitor To activate press +/-. Press either +/- button to activate the Monitor;

press either +/- button again to deactivate. When Monitor is ON, you can hear static if no activity is present or audio if channel activity is present. Note:

1. Press the Menu button to navigate to Scan mode. 2. When Scan is OFF, you can hear the voice prompt: Scan To activate press +/-. Press either +/- button to activate the Scan;

press either +/- button again to deactivate. 3. 4. When Scan is on, you can hear the voice prompt: Scan To deactivate press +/-

button. 4. 5. To engage the Monitor mode, enable Monitor via the menu and let the menu time out. To deactivate, press PTT during Monitor Menu mode. Scanning For multi-channel models only You can scan up to 4 channels on CLP1040 models and scan up to 6 channels on CLP1060 models. When the radio detects activity, it stops scanning and locks in on the active channel. This allows you to talk and listen to the person transmitting without changing channels. 10 I W E V R E V O O D A R I 2000044_CLP_en.book Page 11 Thursday, November 9, 2017 6:40 PM Dynamic Talkaround Scan (*)

"Dynamic Talkaround Scan" is a simple but effective method for an on-site repeater enabled two-way radio systems to maximize communication coverage. This feature can be enabled on a repeater channel via the Customer Programming Software (CPS). The Dynamic Talkaround Scan gives the radio the ability to scan both the transmit and receive frequencies of a repeater channel. Note:

(*) Enhancement feature on CLP Radios. May not be available on previous shipping radios. The Dynamic Talkaround Scan is given higher priority then the Scan Mode. If the Dynamic Talkaround Scan and Scan is enabled on the home channel, then the radio can only support the Dynamic Talkaround Scan. Sending Call Tone (enabled through CPS) 1. 2. Press the Menu button to navigate to Call Tone. Press either +/- button to transmit selected Call Tone. Note:

There are 4 Call Tones available. Mute Feature (*) You can quickly lower the headset volume using the Mute feature. 1. Press and hold + or - button while receiving audio to quickly lower the headset volume to Mute Headset Volume setting (configurable via CPS). You can hear the voice prompt: "Mute"

To switch back to the previous headset volume setting, press and hold + or - button again. You can hear the voice prompt: "Unmute". 2. Note:

(*) Enhancement feature on CLP radios. May not available on previous shipping radios. The enhanced CLP does not support the volume scroll like the previous CLP models. Talk Permit Tone (*) In mixed fleet situations (CLP1010 or CLP1040 and CLP1060), Bluetooth users may miss some words due to the Bluetooth connection not being established. Talk Permit Tone allocates some time so that the link between the radio and headset gets reestablished thus minimizing the lost words. (The Talk Permit Tone is disabled by default on CPS on the Bluetooth models). Note:

(*) Enhancement feature on CLP radios may not be available on previous shipping radios. I R A D O O V E R V E W I 11 R E G R A H C D N A Y R E T T A B S E R U T A E F 2000044_CLP_en.book Page 12 Thursday, November 9, 2017 6:40 PM BATTERY AND CHARGER FEATURES BATTERY FEATURES The CLP Series radio provides Lithium-Ion batteries that come in different capacities that define the battery life. About the Li-Ion Battery The CLP Series radio comes equipped with a rechargeable Li-Ion battery. This battery should be charged before initial use to ensure optimum capacity and performance. Battery life is determined by several factors. Among the more critical are the regular overcharge of batteries and the average depth of discharge with each cycle. Typically, the greater the overcharge and the deeper the average discharge, the fewer cycles a battery can last. For example, a battery which is overcharged and discharged 100% several times a day, lasts fewer cycles than a battery that receives less of an overcharge and is discharged to 50% per day. Further, a battery which receives minimal overcharging and averages only 25% discharge, lasts even longer. 12 Motorola Solutions batteries are designed specifically to be used with a Motorola Solutions charger and vice versa. Charging in non-Motorola Solutions equipment may lead to battery damage and void the battery warranty. The battery should be at about 77 F (25 C)

(room temperature), whenever possible. Charging a cold battery (below 50 F [10 C]) may result in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery (above 95 F [35 C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola Solutions rapid-

rate battery chargers contain a temperature-sensing circuit to ensure that batteries are charged within the temperature limits stated above. Battery Life Based on 5% transmit, 5% receive, 90% standby

(standard duty cycle):

Estimated Battery Life Battery Type Standard Li-Ion Battery High Capacity Li-Ion Battery 9 hours 8 hours 14 hours 12 hours Standard Charging Solution CLP1010, CLP1040 CLP1060

(Bluetooth Always ON Mode) 2000044_CLP_en.book Page 13 Thursday, November 9, 2017 6:40 PM Battery Recycling and Disposal Li-Ion rechargeable batteries can be recycled. However, recycling facilities may not be available in all areas. Under various U.S. state laws and the laws of several other countries, batteries must be recycled and cannot be disposed of in landfills or incinerators. Contact your local waste management agency for specific requirements and information in your area. Motorola Solutions fully endorses and encourages the recycling of Li-Ion batteries. In the U.S. and Canada, Motorola Solutions participates in the nationwide Rechargeable Battery Recycling Corporation (RBRC) program for Li-Ion battery collection and recycling. Many retailers and dealers participate in this program. For the location of the drop-off facility closest to you, access RBRC's Internet web site at:

http://www.call2recycle.org or call:

1- 877-723-1297. This internet site and telephone number also provides other useful information concerning recycling options for consumers, businesses and governmental agencies. 13 F E A T U R E S B A T T E R Y A N D C H A R G E R R E G R A H C D N A Y R E T T A B S E R U T A E F 2000044_CLP_en.book Page 14 Thursday, November 9, 2017 6:40 PM Removing the Lithium-Ion (Li-Ion) Battery Power Supply, Adapter and Drop-in Tray Charger Battery Latch 1. 2. 3. Turn the radio OFF. Push the latch up at the bottom of the battery door and lift the battery door off the radio. Pull the battery away from the radio. The radio is packaged with one Drop-in Tray Charger with transformer. For details, see Chargers Section on page 43. 14 2000044_CLP_en.book Page 15 Thursday, November 9, 2017 6:40 PM Charging a Standalone Battery For your convenience the battery on the CLP radios can be charged as a stand alone battery using either a Single Unit Charger (SUC) or a Multi-Unit Charger

(MUC). Note:

When acquiring additional chargers or power supplies, make sure you have similar drop-in tray chargers and power supplies sets. For part number details, refer to Chargers Section on page 43. Micro-USB Charging Jack To charge only the battery:

1. Insert the connector of the power supply into the Micro USB port on the front of the drop-in tray charger. 2. 3. 4. Connect the CLP power supply to a proper AC outlet. Insert the battery into the tray, with the inside surface of the battery facing the front of the charger, as shown. Ensure the slots in the battery correctly engage in the charger. Estimated Charging Time The following table provides the estimated charging time of the battery. Estimated Charging Time Battery Type Standard Li- Ion Battery High Capacity Li-Ion Battery 4 hours 5.5 hours 2.5 hours 4 hours Charging Solution Single Unit Charger Multi Unit Charger For further details, see Batteries Section on page 43. 15 F E A T U R E S B A T T E R Y A N D C H A R G E R R E G R A H C D N A Y R E T T A B S E R U T A E F 2000044_CLP_en.book Page 16 Thursday, November 9, 2017 6:40 PM Charging the Radio with the Drop-in Tray Single Unit Charger (SUC) Charging with the Drop-In Tray Multi-Unit Charger (Optional Accessory) 1. 2. 3. 4. Note:

Place the drop-in tray charger on a flat surface. Insert the connector of the power supply into the Micro USB port on the front of the drop-in tray charger. Connect the correct power supply to a proper AC outlet. Insert the radio (with battery installed) into the tray, facing down and making sure the charging contacts on the charger are aligned with the contacts on the radio. When charging a battery attached to a radio, turn the radio OFF to ensure a full charge. The radio fits in the charger with the holster attached when placed face down in the tray. 16 The Multi-Unit Charger (MUC) allows drop-in charging of up to 6 radios. Each of the 6 charging pockets can hold a radio (with battery installed). The Multi-Unit Charger provides pockets for headset storage. 1. Place the charger on a flat surface or mount it on the wall. Insert the power cord plug into the jack on the MUC. Plug the cord into an AC outlet and then into charger. Turn the radio OFF. 2. 3. 4. 2000044_CLP_en.book Page 17 Thursday, November 9, 2017 6:40 PM Note:

5. If the radio is ON while charging, it takes longer to fully charge. For part number details, refer to theAccessories Section on page 43. Insert the radio facing down (with battery installed) into the charging pocket, making sure the radio contacts are aligned with the MUC contacts. Charger LED Indicator Status LED Status Comments Note:

The battery can be charged by itself using the slot on the flat surface of the charging pocket. Charging Status LEDs On the drop-in charger, the radio charging pocket has an LED Charger. On the MUC, each of the 6 charging pockets has an LED. The LEDs are grouped into pairs to show which charging pockets are paired. The LED is red when the battery is charging. It turns to green once the battery is fully charged. Note:

This Multi Unit Charger allows you to clone up to 2 radios (2 Source radios and 2 Target radios). For more details, refer to Radio Cloning Section on page 24. Charging Charge Complete Battery Fault (*) Note:

Note:

Steady Red Indication Steady Green Indication Blinking Red The charger is currently charging. Battery is fully charged. Battery was faulty when inserted. The LED is red when the battery is charging. It turns to green once the battery is fully charged.

(*) Re-seating the battery pack likely corrects this issue. 17 F E A T U R E S B A T T E R Y A N D C H A R G E R R E G R A H C D N A Y R E T T A B S E R U T A E F 2000044_CLP_en.book Page 18 Thursday, November 9, 2017 6:40 PM Charging the Bluetooth Headset Refer to your Bluetooth headset leaflet for charging instruction. Charging Bluetooth Headset with CLP Series Drop-In Tray Multi-Unit Charger and Cloning Cable (Optional Accessory) You can also charge your Bluetooth headset with CLP Series Multi Unit Charger (MUC) P/N HKPN4007 (optional accessory) and Cloning Cable P/N HKKN4026 (optional accessory). Plug one side of the cloning cable microconnector to the USB port of the Multi-Unit Charger (there are 6 USB port on top of the accessory pockets) Plug the other end of the cloning cable to the USB port of the Bluetooth headset for charging Note:

Refer to the charging status light on your Bluetooth headset leaflet. 18 Checking Battery Status When powered on, short press and release the Power/Battery button, the Smart Status Glow and Voice Assisted Operation features (* ) gives you the battery status of the radio. Battery Status Level Battery Level High (70 100%) Battery Level Medium (30 70%) Battery Level Low (10 30%) Battery Level Critical (0 10%) LED Status Color Green Yellow Red Blinking Red After the Smart Status Glow and Voice Assisted Operation features (*) indicate the BATTERY STATUS, it returns to the current channel color. Note:

(*) May not be available on certain previous shipping radios. 2000044_CLP_en.book Page 19 Thursday, November 9, 2017 6:40 PM BATTERIES AND CHARGERS SAFETY INFORMATION This document contains important safety and operating instructions. Read these instructions carefully and save them for future reference. Before using the battery charger, read all the instructions and cautionary markings on 1. the charger, the battery, and the radio using the battery To reduce risk of injury, charge only the rechargeable Motorola Solutions-authorized batteries. Other batteries may explode, causing personal injury and damage. Use of accessories not recommended by Motorola Solutions may result in risk of fire, electric shock, or injury. 2. 3. 4. 5. 6. 7. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in risk of fire and electric shock. If an extension cord must be used, make sure that the cord size is 18 AWG for lengths up to 6.5 feet (2.0 m), and 16 AWG for lengths up to 9.8 feet (3.0 m). To reduce risk of fire, electric shock, or injury, do not operate the charger if it has been broken or damaged in any way. Take it to a qualified Motorola Solutions service representative. Do not disassemble the charger; it is not repairable and replacement parts are not available. Disassembly of the charger may result in risk of electrical shock or fire. To reduce risk of electric shock, unplug the charger from the AC outlet before attempting any maintenance or cleaning S A F E T Y I N F O R M A T O N I I B A T T E R E S A N D C H A R G E R S 19 2000044_CLP_en.book Page 20 Thursday, November 9, 2017 6:40 PM OPERATIONAL SAFETY GUIDELINES Turn the radio OFF when charging battery. The charger is not suitable for outdoor use. Use only in dry locations/conditions. Connect charger only to an appropriately fused and wired supply of the correct voltage (as specified on the product). Disconnect charger from line voltage by removing main plug. The outlet to which this equipment is connected should be nearby and easily accessible. Maximum ambient temperature around the power supply equipment must not exceed 40 C

(104 F). Make sure that the cord is located where it cannot be stepped on, tripped over, or subjected to water, damage, or stress. 20 S R E G R A H C D N A S E R E T T A B I I N O T A M R O F N I Y T E F A S 2000044_CLP_en.book Page 21 Thursday, November 9, 2017 6:40 PM PROGRAMMING THE RADIO THROUGH THE CPS RADIO PROGRAMMING OVERVIEW Downloading the (Customer Programming Software) CPS You can program or change features on your CLP radios by using the Computer Programming Software

(CPS) and the CPS Programming Cable (*). CPS software is available for free as web based download-

able software at: www.motorolasolutions.com/CLP After downloading the CPS, install the software to your computer. Programming the Radio To program the radio:

1. Connect the radio via the Drop-in Charger Tray or the Charging Pocket with PROG label on the Multi-Unit Charger and CPS Programming Cable. Programming the Radio through a Single Unit Charger 21 Programming the Radio through a Multi-Unit Charger T H R O U G H T H E C P S I P R O G R A M M N G T H E R A D O I 2000044_CLP_en.book Page 22 Thursday, November 9, 2017 6:40 PM 2. 3. 4. Make sure the radio is turned ON. Once the radio is connected, open the CPS and select Read on the toolbar to get the radio profile. The CPS allows the user to change settings, such as General, Audio, Menu, Channels, Scan List, Customized PL/DPL, Bluetooth (*) as well as select frequencies, PL/

DPL codes on each channel. After you change the settings, select Write on the toolbar to save the settings. For more information on the Computer Programming Software, please refer to Help menu on the CPS. Note:

(*) CPS Programming Cable (P/N HKKN4025) is an accessory sold separately. Please contact your Motorola Solutions Point of Purchase for more information.

(*) Bluetooth is available on selected models only. Note:

Factory Default Settings Your radio is programmed at the factory to the following settings:

CLP1010 1W UHF 1 CH Radios Default Settings - BRUS Channel

#

Frequency

#

Frequency Setting 1 2 464.5500 Code Value

(Hz) 67.0 Band width

(kHz) 12.5 CLP1040 1W UHF 4 CH Radios Default Settings - BRUS Channel

#

Frequency

#

Frequency Settings 1 2 3 4 2 8 5 6 464.5500 467.9250 467.8500 467.8750 Code Value

(Hz) 67.0 67.0 67.0 67.0 Band width

(kHz) 12.5 12.5 12.5 12.5 22 I O D A R E H T G N M M A R G O R P I S P C E H T H G U O R H T 2000044_CLP_en.book Page 23 Thursday, November 9, 2017 6:40 PM CLP1060 1W UHF 6 CH Bluetooth Radios Default Settings

- BRUS Channel

#

Frequency

#

Frequency Settings 1 2 3 4 5 6 2 8 5 6 10 12 464.5500 467.9250 467.8500 467.8750 461.0625 461.1125 Code Value

(Hz) 67.0 67.0 67.0 67.0 67.0 67.0 Band width

(kHz) 12.5 12.5 12.5 12.5 12.5 12.5 23 T H R O U G H T H E C P S I P R O G R A M M N G T H E R A D O I I G N N O L C O D A R I 2000044_CLP_en.book Page 24 Thursday, November 9, 2017 6:40 PM RADIO CLONING CLONING RADIO SETTINGS You can copy the CLP Series radio settings from one radio (the source) to a second radio using the CLP Series Single Unit Charger (SUC) Kit P/N HKPN4008 and CLP Series Cloning Cable Kit P/N HKKN4026 (optional accessory) or CLP Series Multi-Unit Charger (MUC) Kit P/N HKPN4007

(optional accessory). A multi-channel radio can be cloned to a single-

channel radio BUT only the first channel is cloned. The Multi-Unit Charger (MUC) does not have to be plugged in for cloning, but both radios require charged batteries. Note:

The enhanced CLP software also uses the LED to indicate pass or fail status during cloning. Green LED during cloning indicates pass status and red LED during cloning indicates fail status. 24 CLONING INSTRUCTIONS Cloning Radios using the CLP Series Cloning Cable Kit P/N HKKN4026 (optional accessory) Cloning the Radio through a Single Unit Charger Source Radio: Radio to be cloned Target Radio: Radio to which the configuration of the Source Radio is to be copied. Before beginning the cloning process, make sure you have:

A fully charged battery on each one of the radios Two CLP Series Single Unit Charger (SUC) Kits Both radios are turned OFF 1. Unplug any cables (power supply or USB cables) from the Single Unit Chargers. 2000044_CLP_en.book Page 25 Thursday, November 9, 2017 6:40 PM 6. 7. After cloning is completed, the Source Radio sounds either a pass tone (cloning was successful) or a fail tone (cloning process has failed). The pass tone sounds like a good key chirp whereas the fail tone sounds similar to a bonk tone.

(A tone is heard in no more than 5 seconds). Once you have completed the cloning process, you should turn the radios OFF and ON to bring them to normal user mode

(exit clone mode). 2. Plug one side of the cloning cable microconnector to one Single Unit Charger. Plug the other end to the second Single Unit Charger. Note:

During the cloning process no power is being applied to the Single Unit Charger. The batteries cannot be charged. A data communication is being established between the two radios. 3. 4. 5. Turn ON the Target Radio and place it into one of the Single Unit Chargers. Power the Source Radio following the sequence below: Press and hold the Push-

to-Talk (PTT) and the -Button simultaneously while turning the radio ON until you hear the Cloning Tone and Double Blinking Yellow Glow. on the Smart Status Place the Source Radio in its Single Unit Charger with an Audio accessory, then press and release Menu Button to start the cloning process. 25 I R A D O C L O N N G I 2000044_CLP_en.book Page 26 Thursday, November 9, 2017 6:40 PM Note:

This cloning cable is designed to operate only with compatible Motorola Solutions Drop-in Tray Single Unit Charger. When ordering the cloning cable, please refer to CLP Series Cloning Cable Kit P/N HKKN4026. For details about accessories, refer to "Accessories" Section on page 43. What to do if cloning fails The radio emits an audible bonk indicating that the cloning process has failed. In the event that cloning fails, try performing each of the following before trying to start the cloning process again. 1. Make sure that the radio batteries on both radios are fully charged. 2. Verify the cloning cable connection on both Single Unit Chargers. 3. Make sure that the battery is engaged properly on to the radio. I G N N O L C O D A R I 4. Make sure that there is no debris in the charging tray or on the radio contacts. Verify that the source radio is in cloning mode. 5. 6. Make sure that the radio to be cloned is turned ON. 7. Make sure that radios are both from the same type (same frequency band, same region and same transmission power). 26 2000044_CLP_en.book Page 27 Thursday, November 9, 2017 6:40 PM 3. 4. 5. 6. 7. Turn the target radio ON and place it in the pairing charging pocket that has the CLONE label and start the cloning process. Press the Menu button on the source radio to start the cloning process. The source radio generates the start clone tone. Once the cloning is completed, turn the target radio OFF and back ON again in order to activate the radio. To clone another radio, repeat steps 3, 4 and 5. To exit clone mode on the source radio, turn the radio OFF. Cloning Radios using the CLP Series Multi-

Unit Charger (MUC) Kit P/N HKPN4007

(optional accessory) Cloning the Radio through a Multi-Unit Charger 1. 2. To put the source radio into clone mode, press and hold PTT and the - button while turning the radio ON until you hear the Cloning Tone and Double Blinking Yellow on the Smart Status Glow. Place the source radio into one of the charging pockets that has the CLONE label. 27 I R A D O C L O N N G I 2000044_CLP_en.book Page 28 Thursday, November 9, 2017 6:40 PM ADVANCED RADIO CONFIGURATION (*)

(*) Enhancement feature on CLP radios. May not be available on previous shipping radios. Advanced Radio Configuration provides you with the ability to configure the following settings from a pre-programmed list without the need to use a computer. Frequencies allows the user to select frequencies for each channel. Codes helps minimize interference by providing the user with a choice of code combinations that filter out static, noise, and unwanted messages. Entering Advanced Radio Configuration Mode Before starting, make sure the device is powered OFF. Channels Frequencies Codes (CTCC/DPL) Note:

For Bluetooth models, make sure the wired accessory is connected or the Bluetooth headset is paired before entering Advanced Radio Configuration Mode. 1. Note:

2. Press the PTT, + button and Power button at the same time and hold for 3 to 5 seconds until you hear a chirp sound and the voice prompt Programming Mode. The LED Indicator should start blinking a green heartbeat. Press the Menu button to select the settings you want to change:

Channel (for multi-channel models) Frequency Code The voice announcements indicate the menu items and their current settings. To change, press +/- buttons; to go to the next menu item, press Menu button. To exit the Advanced Radio Configuration Mode, press and hold the PTT button until you hear a beep sound. Resume normal radio operation. 3. 4. 5. 28 I I

)

*

(

O D A R D E C N A V D A N O T A R U G F N O C I 2000044_CLP_en.book Page 29 Thursday, November 9, 2017 6:40 PM TROUBLESHOOTING Symptom No Power Hearing other noises or conversation on a channel Message Scrambled Audio quality not good enough Try this Recharge or replace Li-Ion battery. Extreme operating temperatures affect battery life. Refer to About the Li-Ion Battery Section on page 12. Confirm Interference Eliminator Code is set. Frequency or Interference Eliminator Code may be in use. Change settings: either change frequencies or codes on all radios. Make sure radio is at the right frequency and code when transmitting. Scramble Code might be ON, and/or setting does not match other radios' settings. Use CPS to change settings. Radio settings might not be matching up correctly. Double check frequencies, codes and bandwidths to ensure they are identical in all radios. 29 T R O U B L E S H O O T N G I 2000044_CLP_en.book Page 30 Thursday, November 9, 2017 6:40 PM Symptom Limited talk range Message not transmitted/

received I G N T O O H S E L B U O R T 30 Try this Steel and/or concrete structures, heavy foliage, buildings or vehicles decrease range. Check for clear line of sight to improve transmission. Change location of radio. To increase range and coverage, you can either reduce obstructions or increase power. UHF radios provide greater coverage in industrial and commercial buildings. Increasing power provides greater signal range and increased penetration through obstructions. Make sure the PTT button is completely pressed when transmitting. Confirm that the radios have the same Channel, Frequency, Interference Eliminator Code and Scramble Code settings. Refer to Transmitting and Receiving Section on page 7. Recharge, replace and/or reposition batteries. Refer to About the Li-Ion Battery Section on page 12. Obstructions and operating indoors, or in vehicles, may interfere. Change location. Verify that the radio is not in Scan mode. Refer to Scanning Section on page 10. 2000044_CLP_en.book Page 31 Thursday, November 9, 2017 6:40 PM Symptom Heavy static or interference Low batteries Drop-in Charger LED light does not blink Try this Radios are too close, they must be at least five feet apart. Radios are too far apart or obstacles are interfering with transmission. Recharge or replace Li-Ion battery. Extreme operating temperatures affect battery life. Refer to About the Li-Ion Battery Section on page 12. Check radio/battery is properly inserted and check battery/

charger contacts to ensure they are clean and the charging pin is inserted correctly. Refer to Charging a Standalone Battery Section on page 15 and Charger LED Indicator Section on page 17. 31 T R O U B L E S H O O T N G I 2000044_CLP_en.book Page 32 Thursday, November 9, 2017 6:40 PM Symptom Cannot activate VOX Battery doesn't charge although it has been placed in the drop-in charger for a while Unable to pair a Bluetooth headset Unable to connect to a Bluetooth headset Pairing with wrong Bluetooth headset Try this VOX feature might be OFF. Use the CPS to ensure that the VOX Sensitivity Level is not set to 0. Accessory not working or not compatible. Check drop-in charger is connected and correspond to a compatible power supply. Refer to Charging a Standalone Battery Section on page 15. Check the charger LEDs indicators to see if battery has a problem. Refer to Charger LED Indicator Section on page 17. Make sure the target Bluetooth headset is not connected to another device. Make sure the target Bluetooth headset is not connected to another device. Dont perform pairing procedures next to other Bluetooth headset devices. CLP Bluetooth uses proximity pairing. Make sure the headset is placed next to the CLP radio. Note: Whenever a feature in your radio seems to not correspond to the default or preprogrammed values, check if your radio have been programmed using CPS with a customized profile. I G N T O O H S E L B U O R T 32 2000044_CLP_en.book Page 33 Thursday, November 9, 2017 6:40 PM USE AND CARE Use a soft damp cloth to clean the exterior. Do not immerse in water. Do not use alcohol or cleaning solutions. If the portable is submerged in water... Turn OFF and remove batteries. Dry with soft cloth. Do not use until completely dry. 33 U S E A N D C A R E 2000044_CLP_en.book Page 34 Thursday, November 9, 2017 6:40 PM RADIO FREQUENCY AND CODE CHARTS These charts provide frequency information and are useful when using Motorola Solutions CLP Series Two-Way Radios with other business radios. Most of the frequency positions are the same as Spirit M, GT, S, XTN, RDX and CLS Series frequency positions (where applicable), the bandwidths are different. CLP UHF Frequencies Band width

(kHz) 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 Freq.

#

13 14 15 16 17 18 19 20 21 22 23 24 Freq.

#

Freq.

(MHz) 1 2 3 4 5 6 7 8 9 10 11 12 464.5000 464.5500 467.7625 467.8125 467.8500 467.8750 467.9000 467.9250 461.0375 461.0625 461.0875 461.1125 34 Freq.

(MHz) Band width

(kHz) Freq.

#

461.1375 461.1625 461.1875 461. 2125 461.2375 461.2625 461.2875 461.3125 461.3375 461.3625 462.7625 462.7875 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 25 26 27 28 29 30 31 32 33 34 35 36 Freq.

(MHz) 462.8125 462.8375 462.8625 462.8875 462.9125 464.4875 464.5125 464.5375 464.5625 466.0375 466.0625 466.0875 Band width

(kHz) Freq.

#

Freq.

(MHz) Band width

(kHz) 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 37 38 39 40 41 42 43 44 45 46 47 48 466.1125 466.1375 466.1625 466.1875 466.2125 466.2375 466.2625 466.2875 466.3125 466.3375 466.3625 467.7875 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 D N A Y C N E U Q E R F O D A R I S T R A H C E D O C 2000044_CLP_en.book Page 35 Thursday, November 9, 2017 6:40 PM CLP UHF Frequencies Freq.

#

Freq.

(MHz) 49 50 51 52 53 54 55 56 57 58 59 467.8375 467.8625 467.8875 467.9125 469.4875 469.5125 469.5375 469.5625 462.1875 462.4625 462.4875 Band width

(kHz) 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 Freq.

#

60 61 62 63 64 65 66 67 68 69 70 Freq.

(MHz) 462.5125 467.1875 467.4625 467.4875 467.5125 451.1875 451.2375 451.2875 451.3375 451.4375 451.5375 Freq.

#

Freq.

(MHz) 71 72 73 74 75 76 77 78 79 80 451.6375 452.3125 452.5375 452.4125 452.5125 452.7625 452.8625 456.1875 456.2375 456.2875 Band width

(kHz) 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 Freq.

#

Freq.

(MHz) Band width

(kHz) 81 82 83 84 85 86 87 88 89 90 468.2125 468.2625 468.3125 468.3625 468.4125 468.4625 468.5125 468.5625 468.6125 468.6625 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 Band width

(kHz) 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 C O D E C H A R T S I R A D O F R E Q U E N C Y A N D 35 2000044_CLP_en.book Page 36 Thursday, November 9, 2017 6:40 PM CTCSS/DPL Interference Eliminator Codes CTCSS 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Code Disabled 67 71.9 74.4 77 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100 103.5 107.2 110.9 114.8 118.8 123 127.3 131.8 136.5 141.3 146.2 36 CTCSS/DPL 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 122 39 40 41 42 43 44 45 46 Code 151.4 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 69.3 23 25 26 31 32 43 47 51 DPL 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 Code 54 65 71 72 73 74 114 115 116 125 131 132 134 143 152 155 156 162 165 172 174 205 223 226 DPL 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 Code 243 244 245 251 261 263 265 271 306 311 315 331 343 346 351 364 365 371 411 412 413 423 431 432 DPL 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 Code 445 464 465 466 503 506 516 532 546 565 606 612 624 627 631 632 654 662 664 703 712 723 731 732 734 D N A Y C N E U Q E R F O D A R I S T R A H C E D O C 2000044_CLP_en.book Page 37 Thursday, November 9, 2017 6:40 PM CTCSS/DPL Interference Eliminator Codes (contd) DPL 120 121 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 Code 743 754 645 Customized PL Customized PL Customized PL Customized PL Customized PL Customized PL Inverted DPL 39 Inverted DPL 40 Inverted DPL 41 Inverted DPL 42 Inverted DPL 43 Inverted DPL 44 Inverted DPL 45 Inverted DPL 46 Inverted DPL 47 Inverted DPL 48 Inverted DPL 49 Inverted DPL 50 Inverted DPL 51 Inverted DPL 52 Inverted DPL 53 Inverted DPL 54 DPL 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 Code Inverted DPL 55 Inverted DPL 56 Inverted DPL 57 Inverted DPL 58 Inverted DPL 59 Inverted DPL 60 Inverted DPL 61 Inverted DPL 62 Inverted DPL 63 Inverted DPL 64 Inverted DPL 65 Inverted DPL 66 Inverted DPL 67 Inverted DPL 68 Inverted DPL 69 Inverted DPL 70 Inverted DPL 71 Inverted DPL 72 Inverted DPL 73 Inverted DPL 74 Inverted DPL 75 Inverted DPL 76 Inverted DPL 77 Inverted DPL 78 Inverted DPL 79 DPL 171 172 173 174 175 176 177 178 179 180 181 181 182 183 184 185 186 187 188 189 190 191 192 193 194 Code Inverted DPL 80 Inverted DPL 81 Inverted DPL 82 Inverted DPL 83 Inverted DPL 84 Inverted DPL 85 Inverted DPL 86 Inverted DPL 87 Inverted DPL 88 Inverted DPL 89 Inverted DPL 90 Inverted DPL 90 Inverted DPL 91 Inverted DPL 92 Inverted DPL 93 Inverted DPL 94 Inverted DPL 95 Inverted DPL 96 Inverted DPL 97 Inverted DPL 98 Inverted DPL 99 Inverted DPL 100 Inverted DPL 101 Inverted DPL 102 Inverted DPL 103 DPL 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 Code Inverted DPL 104 Inverted DPL 105 Inverted DPL 106 Inverted DPL 107 Inverted DPL 108 Inverted DPL 109 Inverted DPL 110 Inverted DPL 111 Inverted DPL 112 Inverted DPL 113 Inverted DPL 114 Inverted DPL 115 Inverted DPL 116 Inverted DPL 117 Inverted DPL 118 Inverted DPL 119 Inverted DPL 120 Inverted DPL 121 Inverted DPL 123 Customized DPL Customized DPL Customized DPL Customized DPL Customized DPL Customized DPL 37 C O D E C H A R T S I R A D O F R E Q U E N C Y A N D 2000044_CLP_en.book Page 38 Thursday, November 9, 2017 6:40 PM MOTOROLA SOLUTIONS LIMITED WARRANTY FOR THE UNITED STATES AND CANADA What Does this Warranty Cover?

Subject to the exclusions contained below, Motorola Solutions, Inc. warrants its telephones, pagers, and consumer and business two-way radios (excluding commercial, government or industrial radios) that operate via Family Radio Service or General Mobile Radio Service, Motorola Solutions-branded or certified accessories sold for use with these Products

(Accessories) and Motorola Solutions software contained on CD-ROMs or other tangible media and sold for use with these Products (Software) to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Solutions Products, Accessories and Software purchased by consumers in the United States and Canada, which are accompanied by this written warranty. 38 Y T N A R R A W Products and Accessories Products Covered Length of Coverage Products and Accessories as defined above, unless otherwise provided for below. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap covers and cases. Business Two-way Radio Accessories Products and Accessories that are Repaired or Replaced. Two (2) years from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Two (2) years from the date of purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. 2000044_CLP_en.book Page 39 Thursday, November 9, 2017 6:40 PM Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80 % of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola Solutions, are excluded from coverage. Use of Non-Motorola Solutions Products and Accessories. Defects or damage that result from the use of Non-Motorola Solutions branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola Solutions, or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with

(a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola Solutions housings, or parts, are excluded form coverage. W A R R A N T Y 39 2000044_CLP_en.book Page 40 Thursday, November 9, 2017 6:40 PM Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage. Software Products Covered Length of Coverage Software. Applies only to physical defects in the media that embodies the copy of the software (e.g. CD-

ROM, or floppy disk). Ninety (90) days from the date of purchase. Y T N A R R A W Exclusions Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. 40 Software NOT Embodied in Physical Media. Software that is not embodied in physical media

(e.g. software that is downloaded from the internet), is provided as is and without warranty. WHO IS COVERED?

This warranty extends only to the first consumer purchaser, and is not transferable. WHAT WE WILL DO TO CORRECT WARRANTY PROBLEMS At no charge to you, we have the option to repair or replace the Products or software that do not conform to the warranty, or to refund the Products purchase price. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products or parts. No software updates are provided. HOW TO OBTAIN WARRANTY SERVICE OR OTHER INFORMATION?

Contact your Motorola Solutions point of purchase. Please call:

1-800-448- 6686 in the USA 1-800-461-4575 in Canada 1-866-522-5210 on your TTY (Text Telephone) 2000044_CLP_en.book Page 41 Thursday, November 9, 2017 6:40 PM You will receive instructions on how to ship the Products to Motorola Solutions. You must ship the Products to us with freight, duties and insurance prepaid. Along with the Products you must include:

(a) a copy of your receipt, bill of sale or other comparable proof of purchase;

(b) a written description of the problem;

(c) the name of your service provider (if this Product requires subscription service);

(d) the name and location of the installation facility

(if applicable) and, most importantly;

(e) your address and telephone number. If requested, you must also return all detachable parts such as antennas, batteries and chargers. RETAIN YOUR ORIGINAL PROOF OF PURCHASE We will ship repaired or replacement Products at our expense for the freight and insurance, but at your expense for any duties. If additional information is needed, please contact us at the telephone number listed above. SOFTWARE COPYRIGHT NOTICE The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola Solutions and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola Solutions products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola Solutions or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. W A R R A N T Y 41 2000044_CLP_en.book Page 42 Thursday, November 9, 2017 6:40 PM PATENT NOTICE This product is covered by one or more of the following United States patents. 5896277 5894292 5864752 5699006 5742484 D408396 D399821 D387758 D389158 5894592 5893027 5789098 5734975 5861850 D395882 D383745 D389827 D389139 5929825 5926514 5953640 6071640 D413022 D416252 D416893 D433001 EXPORT LAW ASSURANCES This product is controlled under the export regulations of the United States of America. The Governments of the United States of America may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce. Y T N A R R A W 42 2000044_CLP_en.book Page 43 Thursday, November 9, 2017 6:40 PM ACCESSORIES AUDIO ACCESSORIES Part No. Description HKLN4529_ CLP Single Pin Short Cord Earpiece HKLN4455_/

HKLN4602_ CLP Single Pin Non-Adjustable PTT Earpiece HKLN4487_/

HKLN4603_ BATTERIES Part No. HKNN4013_ HKNN4014_ HKLN4440_ HKLN4441_ CLP Single Pin Surveillance Earpiece Description CLP Series High Capacity Li-Ion Battery Kit CLP Series Standard Li-Ion Battery Kit CLP High Capacity Li-Ion Battery Door Kit CLP Standard Li-Ion Battery Door Kit A C C E S S O R E S I CARRY ACCESSORIES Part No. Description HKLN4433_ CLP Series Magnetic Case (*) HKLN4438_ CLP Series Swivel Belt Clip Holster CHARGERS Part No. HKPN4007_ HKPN4008_ Description CLP Series Multi Unit Charger

(MUC) Kit CLP Series Single Unit Charger

(SUC) Kit PROGRAMMING CABLES Part No. Description HKKN4027_ CLP Series CPS Cable Kit HKKN4026_ CLP Series Cloning Cable Kit Note:

(*) Certain accessories may be or may not be available at the time of purchase. For latest information on accessories, contact your Motorola Solutions point of purchase or visit:

www.motorolasolutions.com/CLP 43 2000044_CLP_en.book Page 44 Thursday, November 9, 2017 6:40 PM For product-related questions, contact:

1-800-448- 6686 in the USA 1-800-461-4575 in Canada 1-866-522-5210 on your TTY (Text Telephone) I S E R O S S E C C A 44 2000044_CLP_en.book Page 45 Thursday, November 9, 2017 6:40 PM 2000044_CLP_en.book Page 46 Thursday, November 9, 2017 6:40 PM M Motorola Solutions Inc. 500 W. Monroe Street, Chicago IL 60661, U.S.A. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2010 and 2017 Motorola Solutions, Inc. All rights reserved.

*68012000044*

68012000044-EB

Motorola Solutions Inc FCC ID: AZ489FT7110 / IC: 109U-89FT7110 EXHIBIT 1 IDENTIFICATION LABEL

(Pursuant to FCC Part 2.907, 2.908 and RSP 100 Sec 3) See the Attached Photograph or Sketch Bottom of Radio Top of Radio Back of Radio Back of Radio under Belt Clip X The label is a polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with the minimum peel strength of 40 oz/inch. See the Attached Photograph and Exhibit 3 for the actual location of the FCC/IC label on the device. X Label Attached Below. See Attached Drawing. LOCATION X TYPE MARKINGS (TEXT) X EXHIBIT 1 SHEET 1 OF 3 Motorola Solutions Inc CLP1060 FCC ID: AZ489FT7110 / IC: 109U-89FT7110 Figure 1: FCC Label for CLU1060BBLBA Figure 2: FCC Label for CLU1060BBLAB Figure 3: FCC Label for CLU1060BBMAB EXHIBIT 1 SHEET 2 OF 3 Motorola Solutions Inc CLP1063 FCC ID: AZ489FT7110 / IC: 109U-89FT7110 Figure 4: IC Label for CLP1063RL EXHIBIT 1 SHEET 3 OF 3

Certification Department SGS North America Inc 620 Old Peachtree Road NW Suite 100, Suwanee GA 30024, United States Date: January 11, 2018 Subject: Application Authorization for FCC and IC filing To Whom It May Concern:

I hereby authorize Arine Lee to apply, on my behalf, the application for the following FCC and IC:

FCC ID:

IC:

Please contact me if there are any questions or issues. Regards, AZ489FT7110 109U-89FT7110 Deanna Zakharia Regulatory Compliance Manager Tel: (954) 723 4707 Email: Deanna.zakharia@motorolasolutions.com ____________________________________________________________________________ Motorola Solutions Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322

MOTOROLA SOLUTIONS FCC ID: AZ489FT7110 IC: 109U-89F T7110 Dear Sir or Madam, The Bluetooth module in AZ489FT7110 is identical to the Bluetooth module in FCC ID AZ489FT4900. The differences between AZ489FT7110 and AZ489FT 4900 are the LMR board changes. The Bluetooth module has not been changed from the original filing. The grounding including ali via interconnects in the region where the Biuetooth module is plugged in is identical to the original filing board. Thus, we would like to reuse the Bluetooth data from the original filling (FCC: AZ48FT4900/IC: 109U-89F T4900). As far as the combined system is concerned, we took data to verify the interoperability and radiations patterns meet all FCC requirements. We appreciate if you could advise us if this is acceptable to proceed for the FCC filing. Thank you for your consideration. Best Regards, par Ong Ming Sooi EE Manager Motorola Solutions Inc. Motorola Solutions Malaysia Sdn Bhd (Co. No. 455657-H) Innoplex, Piot 2A, Medan Bayan Lepas, Mukim 12, S.W.D. 11900 Bayan Lepas, Penang, Malaysia. Tel : 604-2240888

FCC ID: AZ489FT7110 Date: January 9, 2018 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT7110 Dear Sir/Madam, Motorola Solutions Malaysia Sdn Bhd herein submits application for Certification of the subject transmitter. This transmitter is intended for use in a portable radio application with capabilities for clear and coded communications with a variable transmit power operating within the following frequency ranges:

Model Numbers Frequency Rated Power FCC Rules Parts CLU1060BBLBA CLU1060BBLAB CLU1060BBMAB LMR : 450 - 470 MHz 1.0W (Nominal) 1.2W (Max) 0.5W (Min) BT : 2402 - 2480 MHz 2.7mW (Max) 90 15C We are requesting certification under Part(s) of the Commissions Rules listed above to allow operation of this equipment. The transmitter is intended for work related occupational use only under Part 90 of the FCC rules. The subject transmitter complies with Section 90.203 of the Rules in that the operator cannot directly program transmit frequencies using the unit's normally accessible external controls. A complete Certification application is enclosed. If you require any additional information, please contact me at 604-224 0258. Sincerely, Arine Lee Senior Staff Compliance Engineer E-mail: arinelee@motorolasolutions.com ___________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot2A, Medan Bayan Lepas, 11900 Penang, Malaysia EXHIBIT 13A Product Name CLP1060 CLP1060 CLP1060

FCC ID: AZ489FT7110 CONFIDENTIALITY REQUEST January 9, 2018 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transmitter with FCC ID: AZ489FT7110 Dear Sir / Madam, Motorola Solutions Inc is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola Solutions Inc considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d), 0.459 and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as Confidential. Please contact me if you require any additional information. Sincerely, Arine Lee Senior Staff Compliance Engineer E-mail: arinelee@motorolasolutions.com ___________________________________________________________________________________________________________ EXHIBIT 13B Motorola Solutions Malaysia Sdn Bhd, Plot2A, Medan Bayan Lepas, 11900 Penang, Malaysia

Applicant: Motorola Solutions Inc FCC ID: AZ489FT7110 / IC: 109U-89FT7110

(Pursuant to FCC Part 2.907, 2.908 and RSP 100 Sec 4) EXHIBIT 2 Statement of Certification 2.1 Statement of Certification Transceiver type described herein (AZ489FT7110/109U-89FT7110) is in compliance with all applicable parts of the FCC rules and ISED RSS standards. Each unit manufactured, imported, or marketed will conform to the samples tested herein, within the statistical variations that can be expected due to high volume production and test measurement error. NAME: ONG MING SOOI SIGNATURE:

DATE: 20th Oct 2017 TITLE: Engineering Manager EXHIBIT 2 SHEET 1 OF 2 Applicant: Motorola Solutions Inc FCC ID: AZ489FT7110 / IC: 109U-89FT7110 2.2 Attestation Statement (Equipment Class DTS and DSS Bluetooth/WiFi) This device contains an embedded Bluetooth device and WiFi device that are compliant with the applicable FCC Part 15C and ISED RSS 247 regulations. Part 15.247 (a)(1) / RSS 247 Section 5.1 The hopping sequence must be pseudo random. Each frequency must be used equally on the average by each transmitter The receivers input bandwidth is approximately equal to the transmit bandwidth The receiver hops in sequence with the transmitted signal Part 15.247 (a)(1) / RSS 247 Section 5.1 The system is designed to comply with all of the regulations in this section when the transmitter is presented with a continuous data (or information) Part 15.247(h) / RSS 247 Section 5.1 The system does not coordinate its channel selection/hopping sequence with other frequency hopping systems for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters. NAME: OOI YUH SHENG SIGNATURE:

DATE: 20th Oct 2017 TITLE: Electrical Engineer EXHIBIT 2 SHEET 2 OF 2