FCC ID: AZ489FT7097 2-Way Portable Radio with Bluetooth, Bluetooth LE and WiFi

 

APX TWO-WAY RADIOS APX 900 Model 3 USER GUIDE MAY 2017 2017 Motorola Solutions, Inc. All rights reserved

*MN003441A01*

MN003441A01-AA Contents Declaration of Conformity.............................................13 Chapter 1: Important Safety Information...................... 15 Chapter 2: Notice to Users (FCC and Industry Canada)........................................................................17 Software Version............................................... 17 Chapter 3: Computer Software Copyrights.................. 19 Chapter 4: Documentation Copyrights......................... 21 Chapter 5: Disclaimer...................................................23 Chapter 6: Getting Started........................................... 25 Notations Used in This Manual..........................25 Additional Performance Enhancement.............. 25 ASTRO 25 Enhanced Data.....................26 Dynamic System Resilience (DSR)........ 26 Encrypted Integrated Data (EID)............ 26 SecureNet...............................................26 Conventional Talkgroup and Radio Scan Enhancements...............................26 What Your Dealer/System Administrator Can Tell You............................................................. 27 Chapter 7: Preparing Your Radio for Use.................... 29 Send Feedback English Charging the Battery..........................................29 Attaching the Battery ........................................ 29 Attaching the Antenna....................................... 30 Removing and Attaching the Accessory Connector Cover............................................... 31 Attaching the Belt Clip....................................... 32 Turning On the Radio........................................ 33 Adjusting the Volume.........................................34 Chapter 8: Identifying Radio Controls.......................... 35 Radio Parts and Controls.................................. 35 Programmable Features....................................36 Assignable Radio Functions................... 36 Assignable Settings or Utility Functions

................................................................39 Accessing the Preprogrammed Functions.........40 Menu Select Buttons...............................40 Home Button...........................................40 4-Way Navigation Button........................ 41 Back Button............................................ 41 Keypad.............................................................. 41 Keypad Characters Uppercase Mode

................................................................42 3 English Keypad Characters Lowercase Mode

................................................................43 Keypad Characters Numeric Mode......44 Keypad Characters Hexadecimal Mode.......................................................45 Push-To-Talk (PTT) Button............................... 46 Chapter 9: Identifying Status Indicators....................... 47 Status Icons.......................................................47 Text Messaging Service (TMS) Indicators.........50 TMS Status Icons................................... 50 TMS Menu Options.................................52 Call Type Icons..................................................52 LED Indicator.....................................................53 Alert Tones ....................................................... 54 Phone Call Displays and Alerts......................... 58 Display Color Change On Channel................... 59 HAZLOC Battery Type Detection...................... 59 Chapter 10: General Radio Operation..........................61 Selecting a Zone................................................61 Selecting a Radio Channel................................ 61 Selecting a Channel by using Channel Search Button................................................................ 62 4 Mode Select Feature......................................... 63 Saving a Zone and a Channel to a Softkey....................................................63 Saving a Zone and a Channel to a Button..................................................... 64 Receiving and Responding to a Radio Call....... 64 Receiving and Responding to a Talkgroup Call.........................................64 Receiving and Responding to a Private Call (Trunking Only)................................65 Receiving and Responding to a Telephone Call (Trunking Only)..............66 Methods to Make a Radio Call.......................... 66 Making a Talkgroup Call......................... 67 Making a Private Call (Trunking Only).... 67 Making an Enhanced Private Call

(Trunking Only)....................................... 68 Making a Telephone Call (Trunking Only)....................................................... 69 Switching Between Repeater or Direct Operation Button............................................... 70 Monitor Feature................................................. 70 Monitoring a Channel..............................71 Send Feedback Monitoring Conventional Mode............... 71 Chapter 11: Advanced Features.................................. 73 Advanced Call Features.................................... 73 Selective Call (ASTRO Conventional Only)....................................................... 73 Receiving a Selective Call........... 73 Making a Selective Call................73 Talkgroup Call Feature (Conventional Operation Only)...................................... 74 Selecting a Talkgroup.................. 74 Sending a Status Call............................. 75 Responding to the Dynamic Regrouping Feature (Trunking Only)...... 76 Requesting a Reprogram

(Trunking Only)............................ 76 Classification of Regrouped Radios..........................................77 Dynamic Zone Programming (DZP)....... 77 Entering the Dynamic Zone to Select a Dynamic Channel...........78 Saving a Channel in the Dynamic Zone from List Selection...................................... 78 English Saving a Channel in the Dynamic Zone from Channel Name........................................... 79 Deleting a Channel in the Dynamic Zone..............................79 Contacts............................................................ 80 Making a Private Call from Contacts...... 81 Adding a New Contact Entry...................82 Deleting a Contact Entry.........................83 Adding a Contact to a Call List............... 83 Removing a Contact from a Call List...... 84 Methods of Contact Editing in a Call List.......................................................... 84 Editing an Entry Alias...................84 Editing as Entry ID....................... 85 Editing a Call Type.......................85 Viewing Details of a Contact...................86 Scan Lists.......................................................... 86 Viewing a Scan List................................ 87 Editing the Scan List............................... 87 Changing the Scan List Status............... 88 Send Feedback 5 English Viewing and Changing the Priority Status......................................................88 Scan.................................................................. 89 Turning Scan On or Off...........................89 Making a Dynamic Priority Change

(Conventional Scan Only).......................89 Deleting a Nuisance Channel................. 90 Restoring a Nuisance Channel............... 90 Call Alert Paging................................................90 Receiving a Call Alert Page.................... 91 Sending a Call Alert Page.......................91 Quick Call II (ASTRO P25 Digital Trunking and Conventional)............................................. 92 Initiating a Quick Call II Transmission.....93 Emergency Operation........................................93 Sending an Emergency Alarm................ 94 Sending an Emergency Call (Trunking Only)....................................................... 95 Sending An Emergency Call With Hot Mic (Trunking Only)................................ 95 Sending an Emergency Alarm with Emergency Call...................................... 96 Sending An Emergency Alarm and Call with Hot Mic............................................ 97 Sending a Silent Emergency Alarm........ 98 Change of Channels during Emergency..............................................98 Emergency Keep-Alive Feature..............98 Fireground......................................................... 99 Entering Fireground Zone Channel

(Conventional)........................................ 99 Sending Evacuation Tone.....................100 Responding to Evacuation Indicator..... 101 Automatic Registration Service (ARS).............101 Selecting or Changing the ARS Mode.. 102 User Login Feature............................... 102 Logging In as a User..................103 Logging Out............................... 104 Text Messaging Service (TMS)....................... 104 Accessing the Messaging Features......105 Composing and Sending a New Text Message............................................... 105 Sending a Quick Text Message............107 6 Send Feedback Priority Status and Request Reply of a New Text Message............................... 108 Appending a Priority Status to a Text Message............................ 108 Removing a Priority Status from a Text Message......................... 109 Appending a Request Reply to a Text Message............................ 109 Removing a Request Reply from a Text Message......................... 110 Appending a Priority Status and a Reply Request to a Text Message.................................... 110 Removing a Priority Status and a Reply Request from a Text Message.................................... 110 Receiving a Text Message.........111 Viewing a Text Message from the Inbox.................................... 111 Replying to a Received Text Message.................................... 112 Accessing the Drafts Folder.......113 Sent Text Messages.................. 114 Deleting a Text Message........... 115 Send Feedback English Deleting All Text Messages....... 115 ASTRO 25 Advanced Messaging Solution......116 System Setup for ASTRO Advanced Messaging Solution.............................. 117 Two-Factor Authentication....................117 Logging in using the Two-Factor Authentication............................ 117 Logging out of Two-Factor Authentication............................ 119 Sending a Query...................................120 Receiving a Query................................ 121 Secure Operations...........................................122 Selecting Secure Transmissions.......... 122 Selecting Clear Transmissions ............ 122 Managing Encryption............................ 123 Loading an Encryption Key........ 123 Multikey Feature........................ 123 Selecting an Encryption Key...... 124 Selecting a Keyset..................... 124 Erasing the Selected Encryption Keys........................................... 125 Infinite UKEK Retention............. 126 7 English 8 Hear Clear..................................126 Security............................................................126 Radio Lock............................................127 Unlocking Your Radio................ 127 Changing Your Password.......... 127 Changing Your Tactical Inhibit Password................................... 128 Enabling or Disabling the Radio Lock Feature (Secure Radios Only).......................................... 129 Global Positioning System/Global Navigation Satellite System...............................................129 GPS Operation..................................... 130 GPS Performance Enhancement......... 130 The Outdoor Location Feature (Using GPS)..................................................... 131 Military Grid Reference System

(MGRS) Coordinates............................ 132 Accessing the Outdoor Location Feature................................................. 132 Saving a Waypoint................................133 Viewing a Saved Waypoint................... 134 Editing the Alias of a Waypoint............. 134 Editing the Coordinates of a Waypoint. 135 Deleting a Single Saved Waypoint....... 136 Deleting All Saved Waypoints...............137 Measuring the Distance and Bearing from a Saved Waypoint........................ 137 Location Feature in Emergency Mode..138 Geofence (ASTRO 25 Trunking System)........ 138 Entering the Geofence Area................. 139 Mission Critical Geofence..................... 140 Entering Mission Critical Geofence.......140 Exiting Mission Critical Geofence......... 141 Trunking System Controls............................... 141 Operating in Failsoft System.................141 Out-of-Range Radio..............................142 Site Trunking Feature........................... 142 Locking and Unlocking a Site............... 142 Site Display and Search Button............ 143 Viewing the Current Site............ 143 Changing the Current Site......... 143 Bluetooth......................................................... 143 Turning On Bluetooth ...........................144 Turning Off the Bluetooth......................144 Send Feedback Re-Pair Timer....................................... 145 Bluetooth Drop Timer............................145 Radio Indications of Lost Bluetooth Connection............................................146 Standard Pairing Feature......................146 Searching and Pairing the Bluetooth Device........................147 Turning On Bluetooth Visibility...148 Receiving Pairing Request from other Devices............................. 149 Turning Off Bluetooth Visibility...149 PIN Authentication in Pairing................ 149 Pairing the Authentication PIN when Receiving a Pairing Request......................................150 Pairing the Authentication PIN with the Generated Numeric PIN

................................................... 151 Pairing the Authentication PIN by Manually Keying in the Same PIN............................................. 152 Turning On the Bluetooth Audio........... 153 Turning Off the Bluetooth Audio........... 153 Send Feedback English Adjusting the Volume of the Radio from Bluetooth Audio Device........................ 154 Viewing and Clearing the Bluetooth Device Information................................154 Clearing All Bluetooth Devices Information............................................155 Editing the Bluetooth Friendly Name.... 156 Voice Announcement...................................... 157 Site Selectable Alerts (ASTRO 25)..................158 Sending SSA Notification to Single Site

..............................................................158 Sending SSA Notification to Single Site by Manual Entry....................................159 Sending SSA Notification to All Sites....160 Sending SSA Notification to All Available Sites...................................... 161 Stopping SSA Notification of a Single Site........................................................162 Stopping SSA Notification of a Single Site by Manual Entry.............................162 Stopping SSA Notification of All Sites...163 Stopping SSA Notification of All Available Sites...................................... 164 9 English 10 Utilities............................................................. 164 Viewing Recent Calls............................164 Selecting the Power Level.................... 165 Selecting a Radio Profile...................... 166 Enabling and Disabling the Radio Alias

..............................................................167 Selecting the Audio Speaker................ 167 Controlling the Display Backlight.......... 168 Locking and Unlocking the Keypad and Controls................................................ 169 Turning the Controls and Keypad Buttons Tones On or Off.......................169 Turning Voice Mute On or Off...............169 Using the Time-Out Timer.................... 170 Using Conventional Squelch Operation Features................................................171 Analog Options.......................... 171 Digital Options............................171 Using the PL Defeat Feature................ 171 Digital PTT ID Support..........................172 Smart PTT Feature (Conventional Only)..................................................... 172 Transmit Inhibit..................................... 173 Enabling Transmit Inhibition.......173 Disabling Transmit Inhibition......174 IMPRES Battery Annunciator............... 174 Accessing the Battery Info screen........................................ 175 General Radio Information....................175 Accessing the Radio Information

................................................... 175 Viewing the IP Information......... 176 Viewing the Control Assignments.............................. 177 Chapter 12: Helpful Tips.............................................179 Radio Care...................................................... 179 Cleaning Your Radio.............................180 Proper Ways to Handle the Radio........ 181 Radio Service and Repair.....................181 Battery Care.................................................... 181 Battery Charge Status.......................... 181 LED and Sounds........................182 Fuel Gauge Icons.......................182 Battery Recycling and Disposal............ 182 Send Feedback English VI. PATENT AND SOFTWARE PROVISIONS:................................................. 198 VII. GOVERNING LAW:.................................. 199 VIII. For Australia Only.................................... 199 Chapter 13: Accessories............................................ 183 Chapter 14: Maritime Radio Use in the VHF Frequency Range.......................................................185 Special Channel Assignments.........................185 Emergency Channel............................. 185 Non-Commercial Call Channel............. 185 Operating Frequency Requirements............... 186 Declaration of Compliance for the Use of Distress and Safety Frequencies.....................188 Technical Parameters for Interfacing External Data Sources...................................................188 Chapter 15: Glossary................................................. 189 Chapter 16: Limited Warranty.................................... 195 MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS.................... 195 I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:........................................... 195 II. GENERAL PROVISIONS:........................... 196 III. STATE LAW RIGHTS:................................197 IV. HOW TO GET WARRANTY SERVICE:.....197 V. WHAT THIS WARRANTY DOES NOT COVER:...........................................................197 Send Feedback 11 English 12 This page intentionally left blank. Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. Declaration of Conformity Per FCC CFR 47 Part 2 Section 2.1077(a) English Responsible Party Name: Motorola Solutions, Inc. Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product:

Model Name: APX 900 conforms to the following regulations:

FCC Part 15, subpart B, section 15.107(a), 15.107(d), and section 15.109(a) Send Feedback Table continued 13 English Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. NOTICE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and Industry Canada license-exempt RSS standard. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen-

erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or TV technician for help. Increase the separation between the equipment and receiver. 14 Send Feedback English This radio transmitter has been approved by Industry Canada to operate with Motorola Solutions-approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Important Safety Information RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios ATTENTION!

This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. For a list of Motorola Solutions-approved antennas, batteries, and other accessories, visit the following website:

http://www.motorolasolutions.com/APX Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum

(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Send Feedback 15 English 16 This page intentionally left blank. English Notice to Users (FCC and Industry Canada) This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSS's per the following conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment. Software Version All the features described in the following sections are supported by the software version R16.00.00 or later. See Accessing the Radio Information on page 175 to determine the software version of your radio. Check with your dealer or system administrator for more details of all the features supported. Send Feedback 17 English 18 This page intentionally left blank. English Computer Software Copyrights The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola Solutions. Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Send Feedback 19 English 20 This page intentionally left blank. Documentation Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola Solutions. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola Solutions. English Send Feedback 21 English 22 This page intentionally left blank. English Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola Solutions reserves the right to make changes to any products herein to improve readability, function, or design. Motorola Solutions does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others. Send Feedback 23 English 24 This page intentionally left blank. Getting Started How to Use This Guide This User Guide covers the basic operation of the APX Portables. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information. Notations Used in This Manual Throughout the text in this publication, you will notice the use of Warning, Caution, and Notice. These notations are used to emphasize that safety hazards exist, and the care that must be taken or observed. WARNING:

An operational procedure, practice, or condition and so on, which may result in injury or death if not carefully observed. CAUTION:

An operational procedure, practice, or condition and so on, which may result in damage to the equipment if not carefully observed. English NOTICE:

An operational procedure, practice, or condition and so on, which is essential to emphasize. The following special notations identify certain items. Example Home button or Description Buttons and keys are shown in bold print or as an icon. Phon Menu entries are shown similar to the way they appear on the display of the radio. This means Press the right side of the 4-Way Navigation Button. Additional Performance Enhancement The following performance enhancements are some of the latest creations designed to enhance the security, quality, and efficiency of the radios. Send Feedback 25 English ASTRO 25 Enhanced Data ASTRO 25 Enhanced Data is optimized to handle different message sizes and variable update rates from different applications of the radio. Add Enhanced Data to the Integrated Data system with a software installation to improve data channel efficiency and enable denser network traffic. Dynamic System Resilience (DSR) DSR ensures the radio system is seamlessly switched to a backup master site dynamically in case of system failure. DSR also provides additional indication such as failure detection, fault recovery, and redundancy within the system to address to the user in need. Mechanisms related to the Integrated Voice and Data (IV&D) or data centric are all supported by DSR. Encrypted Integrated Data (EID) EID provides security encryption and authentication of IV&D data bearer service communication between the radio and the Customer Enterprise Network. SecureNet SecureNet allows user to perform secured communications on an Analog or Motorola Data Communication (MDC) channel. Conventional Talkgroup and Radio Scan Enhancements A few enhancements have been made to the Conventional Talkgroup at the system. These enhancements improve the Scan feature operation significantly when multiple agencies are using a single conventional radio frequency channel. These enhancements allow users to use Selective Squelch to operate on only the subset of talkgroups that are relevant to the users rather than all talkgroups on the channel. These Scan improvements have been made to eliminate the audio holes that were present and to turn on the busy LED when activity is present on the channel. Mixed Vote Scan and Standard Conventional Scan configurations are supported. Priority Operation is also supported. Up to 30 different talkgroups can be supported using conventional channels. A maximum of four talkgroups can be supported when Vote Scan channels are being used. 26 Send Feedback English NOTICE:

Specifications may vary for different radio models. Check with your dealer or system administrator for more information. Smart PTT is supported with this enhancement as Smart PTT prevents users from transmitting while other users are on the channel. NOTICE:

User Selectable Talkgroups are not compatible with this Conventional Talkgroup Enhancement. What Your Dealer/System Administrator Can Tell You Check with your dealer or system administrator for the correct radio settings, if the radio is to be operated in extreme temperatures (less than -30 C or more than +60 C). You can consult your dealer or system administrator about the following:

Is your radio programmed with any preset conventional channels?

Which buttons have been programmed to access other features?

What optional accessories may suit your needs?

Send Feedback 27 English 28 This page intentionally left blank. Preparing Your Radio for Use This section provides simple instructions to prepare your radio for use. Charging the Battery WARNING:

To avoid a possible explosion:

Do not replace the battery in any area labeled hazardous atmosphere. Do not discard batteries in a fire. The Motorola Solutions-approved battery shipped with your radio is uncharged. Prior to using a new battery, charge it for a minimum of 16 hours to ensure optimum capacity and performance. For a list of Motorola Solutions-authorized batteries and chargers available for use with your radio, see Accessories on page 183. English NOTICE:

When charging a battery attached to a radio, turn the radio off to ensure a full charge. To charge the battery, place the battery (with or without the radio) in a Motorola Solutions-approved charger. The LED on the charger indicates the charging progress; see the Charger User Guide. Attaching the Battery You can view the status of the battery if the radio is using an IMPRES battery. See IMPRES Battery Annunciator on page 174 for more information. NOTICE:

Radio supports revision B and above for PMNN4491 battery. Check with your dealer or system administrator for more information. 1 Slide the battery into the radio frame until the latch which is at the bottom of the radio clicks into place. Send Feedback 29 English 2 To remove the battery, turn the radio off. Lift up the which is at the bottom of the radio, then slide latch the battery out from the radio. Attaching the Antenna Ensure the radio is turned off before attaching the antenna. 1 Set the antenna in the receptacle. 2 Turn the antenna clockwise to attach to the radio. 30 Send Feedback A English Removing and Attaching the Accessory Connector Cover The accessory connector is on the antenna side of the radio. It is used to connect accessories to the radio. NOTICE:

To prevent damage to the connector, shield it with the connector cover when not in use. 1 To remove the accessory connector cover, rotate the counterclockwise until it disengages thumbscrew from the radio. NOTICE:

If the thumbscrew is too tight, use an Allen wrench at to loosen it first. 3 To remove the antenna, turn the antenna counterclockwise. NOTICE:

When removing the antenna, ensure that the radio is turned off. Send Feedback 31 English 5 Once in place, tighten by rotating the thumbscrew clockwise by hand. Attaching the Belt Clip 1 Align the grooves of the belt clip with those of the radio and push down until you hear a click. 2 Rotate and lift the connector cover to disengage it from the radio. 3 To attach the accessory connector cover, insert the of the cover into the slot above the hooked end connector. 4 Press the top of the cover downward to seat it in the slot. 32 Send Feedback ABC 2 To remove the clip, use a flatbladed object to press away from the radio. Then, slide the belt clip tab the clip upward and away from the radio. English Turning On the Radio 1 Rotate the On/Off/Volume Control Knob clockwise until you hear a click. If the power-up test is successful, the display shows Motorola Solutions logo momentarily, followed by the Home screen. If the power-up test is unsuccessful, you see Error XX/YY (XX/YY is an alphanumeric code). NOTICE:

If the radio fails to power-up after repeating a few times, record the Error XX/YY code and contact your dealer. Send Feedback 33 A English 2 To turn off the radio, rotate the On/Off/Volume Control Knob counterclockwise until you hear a click. Your radio is preprogrammed to reset to medium volume rate, which is Level 12, by default every time the radio powers up. 1 To increase the volume, rotate the On/Off/Volume Control Knob clockwise. Adjusting the Volume Ensure the radio is powered on and the main speaker is pointed towards you for increased loudness and intelligibility, especially in areas with loud background noises. 2 To decrease the volume, rotate this knob counterclockwise. 34 Send Feedback A Identifying Radio Controls This chapter explains the buttons and functions to control the radio. Radio Parts and Controls English 1 2 3 4 5 6 16Position Select Knob1 On/Off/Volume Control Knob LED Top Side (Select) Button1 Microphone Push-to-Talk (PTT) Button 1 These radio controls/buttons are programmable. Send Feedback Table continued 35 1151312119102346781416519201817 English 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Side Button 1 1 Side Button 21 Home Button 4-Way Navigation Button Keypad Back Button Menu Select Buttons Main Display Speaker Top (Orange) Button1 Antenna Accessory Connector Battery Latch Battery must use the radio programming software to assign a feature to a control. Your dealer can program the programmable buttons as shortcuts to radio functions or preset channels/groups depending on the duration of a button press:

Press Pressing and releasing rapidly. Long press Pressing and holding for the preprogrammed duration

(between 0.25 and 3.75 seconds). Hold down Keeping the button pressed. Assignable Radio Functions Bluetooth On/Off Allows you to turn on/off the Bluetooth. Bluetooth Configuration Allows you to access to the Bluetooth menu. Programmable Features Any reference in this manual to controls that are preprogrammed means that a qualified radio technician Bluetooth Audio Reroute Allows you to toggle the audio route between radio speaker or Remote Speaker Microphone and Bluetooth headset. 36 Send Feedback Bluetooth Headset PTT Keys up the Bluetooth Headset microphone. Bluetooth Data Devices Pairs with the data devices for data transfer. Bluetooth Clear All Pairing Allows you to clear all pairing information for Bluetooth. This is accessed by a long press of the Bluetooth On/Off Button. Bluetooth Inquiry On/Off Enables Bluetooth Search feature. Bluetooth Discoverable On/Off Enables Bluetooth visibility. This is accessed by a long press of the Bluetooth Inquiry On/Off Button. Call Alert Allows the radio to function like a pager, or to verify if a radio is active on the system. Call Response Allows you to answer a private call. Channel Selects a channel. Contacts Selects the Contacts menu. Send Feedback English Dynamic ID (Conventional Only) Allows you to edit the ASTRO Individual ID and/or MDC Primary ID of the radio. Dynamic Priority (Conventional Only) Allows any channel in a Scan List (except for the Priority-One channel) to temporarily replace the Priority-

Two channel. Emergency Depending on the programming, initiates or cancels an emergency alarm or call. Internet Protocol Address Display the Internet Protocol (IP) address, device name, and status of the radio. Location Determines the current location (latitude, longitude, time and date), and also the distance and bearing to another location or turns the GPS functionality on or off for all locations. Message Enters the current message list. Mode Select Long-press programs a button with the current zone and channel of the radio; once programmed, the short-

37 English press of that button changes the radio zone channel to the programmed zone and channel. Monitor (Conventional Only) Monitors a selected channel for all radio traffic until function is disabled. Multiple Private Line (Conventional Only) Selects the Multiple Private Line lists. Nuisance Delete Temporarily removes an unwanted channel, except for priority channels or the designated transmit channel from the scan list. One Touch 14 Launches a specific feature with one single button-

press. You can setup as many as four separately programmed buttons for four different features. Phone Allows you to make and receive calls similar to standard phone calls. Private Call (Trunking Only) Allows a call from one individual radio to another. Private Line Defeat (Conventional Only) Overrides any coded squelch (DPL or PL) that is preprogrammed to a channel. Query Launches a list of predefined short text messages only after successfully logged in the two-Factor Authentication. Radio Profiles Allows easy access to a set of preprogrammed visual and audio settings of the radio. Recent Calls Allows easy access to the list of calls recently received or made. Rekey Request Notifies the dispatcher that a new encryption key is needed. Repeater Access Button (RAB) (Conventional Only) Allows user to manually send a repeater access codeword. Reprogram Request (Trunking Only) Notifies the dispatcher that a new dynamic regrouping assignment is needed. Request-To-Talk (Conventional Only) Notifies the dispatcher you want to send a voice call. Scan Toggles scan on or off. 38 Send Feedback English Scan List Programming Selects the scan list for editing (by long press on the Scan button). Secure Transmission Select (Conventional and Trunking) Toggles the Secure Transmission On or Off when the Secure/Clear Strapping fields is set to Select for the current channel and when the radio is model/option capable. Selective Call (Conventional Only) Calls an assigned radio. Site Display/Search (Trunking Only) Displays the current site ID and RSSI value; performs site search for Automatic Multiple Site Select (AMSS) or SmartZone operation. Site Lock/Unlock (Trunking Only) Locks onto a specific site. Status (Astro 25 Trunking Only) Sends data calls to the dispatcher about a predefined status. Talkaround/Direct (Conventional Only) Toggles between using a repeater and communicating directly with another radio. Talkgroup (Conventional Only) Allows a call from an individual radio to a group of radios. Text Messaging Service (TMS) Selects the text messaging menu. TMS Quick Text Selects a predefined message. User Automatically registers the users to the server. Zone Select Allows selection from a list of zones. Assignable Settings or Utility Functions Keypad/Controls Lock Locks or unlocks the keypad, programmable buttons, switches or rotary knobs. Light/Flip Press the button to toggle the display backlight on or off Voice Announcement Audibly indicates the current feature mode, Zone or Channel the user has just assigned. Send Feedback 39 English Voice Mute Toggles voice mute on or off. Volume Set Tone Sets the volume set tone. Accessing the Preprogrammed Functions You can access various radio functions through one of the following methods. A short or long press of the relevant programmable buttons. Use the Menu Select Button. Use the Menu Select and Navigation buttons. A B C D E Softkeys Menu Select Buttons Back Button 4Way Navigation Button Home Button Menu Select Buttons NOTICE:

Check with your dealer or system administrator for the list of features activated in your radio. Use the Menu Select button to access the menu entry of your radio feature. Your radio may be preprogrammed differently from the following example, but the steps for selecting a channel may appear as shown below:

Press the Menu Select button directly below Chan. Home Button Pressing the screen. In most cases, this is the current mode. For selected radio features, the button returns you to the Home (default) button is also used to save 40 Send Feedback BCDBEA user-edited radio settings or information before returning you to the Home screen. NOTICE:

Some features do not require you to press to the Home screen. Refer to the individual feature sections in this manual for further details on saving user-edited radio settings or information. to go 4-Way Navigation Button Use the 4-Way Navigation Button to scroll up, down, left, or right with one of the following methods. Press and release one of the buttons to scroll from one entry to the next one. Press and hold one of the buttons to have the radio toggles through the list automatically (release the button to stop). English Back Button Use the Back button to exit the current screen or to return to the previous screen. Keypad You can use the 3 x 4 alphanumeric keypad to access your radio features. The keypad functions in a manner similar to a standard telephone keypad when entering numeric digits. When the keypad is used to edit a list, each key can generate different characters of the alphabet. The following tables show the number of times a key needs to be pressed to generate the required character. Send Feedback 41 English Keypad Characters Uppercase Mode Key 42 Number of Times Key is Pressed 7 1 2 3 4 5 6 8 9 1 0

*

1 1

#

1 2

&

1 3

$

1 4

/

;

!

-

?

@ _

, C F I L O R V Y

. 1 B A E D H G J K M N P Q T U W X Toggle between mixed case mode, uppercase mode and lowercase mode. Space Toggle between numeric and letter mode. S Z 1 5

+

1 6

=

1 7

\

1 8 1 9 2 0

(

2 1

) Send Feedback English 1 5

+

1 6

=

1 7

\

1 8 1 9 2 0

(

2 1

) Keypad Characters Lowercase Mode Key Number of Times Key is Pressed 7 1 2 4 5 6 3 8 9 1 0

*

1 1

#

1 2

&

1 3

$

1 4

/

;

!

-

?

@ _

, c f i l o r v y

. 1 b a e d h g j k m n p q u t w x Toggle between mixed case mode, uppercase mode and lowercase mode. Space Toggle between numeric and letter mode. s z Send Feedback 43 English Keypad Characters Numeric Mode Number of Times Key is Pressed 7 1 2 3 4 5 6 8

;

!

,

.

?

@ _ 1 2 3 4 5 6 7 8 9 0 Space Toggle between numeric and letter mode. Key 44 9

-

1 0

*

1 1

#

1 2

&

1 3

$

1 4

/

1 5

+

1 6

=

1 7

\

1 8 1 9 2 0

(

2 1

) Send Feedback Keypad Characters Hexadecimal Mode English Key Number of Times Key is Pressed 7 1 2 4 5 6 3 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 2 1 C F B E A D 1 2 3 4 5 6 7 8 9 0 Not applicable Not applicable Send Feedback 45 English Push-To-Talk (PTT) Button While a call is not in progress, the PTT button is used to make a new call. See Methods to Make a Radio Call on page 66 for more information. on the side of the radio serves two basic The PTT button purposes:

While a call is in progress, the PTT button allows the radio to transmit to other radios in the call. Press and hold down PTT button to talk. Release the PTT button to listen. The microphone is activated when the PTT button is pressed. 46 Send Feedback A Identifying Status Indicators This chapter explains the status indicators used in the radio. Status Icons The 132 x 90 pixel front liquid crystal display (LCD) of your radio shows radio status, text entries, and menu entries. The top two display rows contain color icons that indicate radio operating conditions. Receiving Radio is receiving a call or data. Transmitting Radio is transmitting a call or data. Battery For IMPRES battery operation only the icon shown indicates the charge re-

maining in the battery. For all battery operation the icon blinks when the battery is low. Send Feedback Table continued English Received Signal Strength Indicator

(RSSI) The number of bars displayed repre-

sents the received signal strength for the current site, for trunking only. The more stripes in the icon, the stronger the signal. Roaming The radio has roamed to and is currently registered to a foreign system. Direct On Radio is currently configured for direct radio-to-radio communication (during conventional operation only). Off Radio is connected with other radios through a repeater. Monitor (Carrier Squelch) Selected channel is being monitored

(during conventional operation only). Table continued 47 English or 48 In-Call User Alert On The feature is enabled. Voice muting of the affiliated trunking talkgroup or selec-

ted conventional channel is activated. Off The feature is disabled. Voice muting of the affiliated trunking talkgroup or selec-

ted conventional channel is deactivated. Power Level L Radio is set at Low power. H Radio is set at High power. Scan Radio is scanning a scan list. Priority Channel Scan Blinking dot Radio detects activity on channel desig-

nated as Priority-One. Table continued Steady dot Radio detects activity on channel desig-

nated as Priority-Two. Vote Scan Enabled The vote scan feature is enabled. Secure Operation On Secure operation. Off Clear operation. Blinking Receiving an encrypted voice call. AES Secure Operation On AES secure operation. Off Clear operation. Blinking Receiving an encrypted voice call. GPS Signal Table continued Send Feedback On Feature is enabled and signal is availa-

ble. Off Feature is disabled. Blinking Feature is enabled, but no signal is available. User Login Indicator (IP Packet Data) On User is currently associated with the ra-

dio. Off User is currently not associated with the radio. Blinking Device registration or user registration with the server failed due to an invalid username or pin. Inverted User successfully login to the secured IP Packet Data. Table continued Send Feedback English Data Activity Data activity is present. Hexadecimal Indicates that the text entry is currently in hexadecimal mode. Numeric Indicates that the text entry is currently in numeric mode. Start Case Indicates that the first character of the text entry is capitalized. Mixed Case Indicates that the text entry is currently in normal text mode. Uppercase Indicates that the text entry is currently in uppercase mode. Lowercase Indicates that the text entry is currently in lowercase mode. Table continued 49 English 50 Lowercase Predictive Indicates that the text entry is currently in lowercase and with predicted words shown at the bottom of the screen. Mixedcase Predictive Indicates that the text entry is currently in mixed case and with predicted words shown at the bottom of the screen. Uppercase Predictive Indicates that the text entry is currently in uppercase and with predicted words shown at the bottom of the screen. Bluetooth On Bluetooth is on and ready for Bluetooth connection. Bluetooth Connected Bluetooth is currently connected to the external Bluetooth device. Text Messaging Service (TMS) Indicators Status icons and menu options shown here help you to work more efficiently with TMS feature. See Text Messaging Service (TMS) on page 104 for more information. TMS Status Icons The following icons appear on the radio display when you send and receive text messages. Inbox Full The Inbox is full. Message Sent The text message is sent successfully. Message Unsent The text message cannot be sent. Unread Message Table continued Send Feedback User receives a new message. The selected text message in the Inbox has not been read. Read Message The selected text message in the Inbox has been read. Normal Message User is composing a message with normal priority and without a request for a reply. Message Index Indicates the index of the current message the user is viewing. Example: If the user is looking at the third message out of a total of six messages in the Inbox folder, the icon is displayed as the icon on the left column. Priority Status The Priority feature is toggled on before the message is sent. Send Feedback Table continued English Messages in the Inbox folder are flagged with Priority. Request Reply The Request Reply feature is toggled on before the message is sent. Messages in the Inbox folder are flagged with Request Reply. Priority Status and Request Reply User is composing a message with a pri-

ority status and a request for a reply. Messages in the Inbox folder are flagged with Priority and Request Reply. 51 English TMS Menu Options The following menu options appear on the radio display when you send and receive text messages. Description/Function Brings you back to the previous screen. Deletes all messages. Deletes a message or text. Brings you to the edit screen. Exits to the Home screen. Returns to the previous screen. Brings you to the Options main screen. Replies to a message. Selects the highlighted command. Sends the message. Updates or saves a command. Menu Option Back Clr Del Edit Exit No Optn Rply Sel Send Yes 52 Call Type Icons The following icons appear on the radio main display, when you make or receive a call, or view selected call lists, to indicate the different call types associated with an alias or ID. Radio number. Radio number added to a Call List. Mobile number. Mobile number added to a Call List. Landline phone number. Landline phone number added to a Call List. Table continued Send Feedback Incoming call or data. Outgoing call or data. Incoming emergency call. LED Indicator The LED indicator radio. shows the operational status of your English Blinking red Radio is transmitting at low battery condition. Double blinking red Radio is in Emergency Mode. Rapidly blinking red Radio has failed the self test upon powering up or encountered a fatal error. Solid yellow (Conventional Only) Channel is busy. Blinking yellow Radio is receiving a secured transmission. Solid green Radio is powering up, or is on a non-priority channel while in the Scan List Programming mode. Blinking green Radio is receiving an individual or telephone call, or is on a Priority-Two channel while in the Scan List Programming mode. Rapidly blinking green Radio is on a Priority-One channel while in the Scan List Programming mode. Solid red Radio is transmitting. Send Feedback 53 A English NOTICE:

No LED indication when the radio receives a clear

(non-secured) transmission in trunking Mode. LED indication can be preprogramed by qualified technician to be permanently disabled. Consult your dealer for further details if you want to disable it. Alert Tones Your radio uses alert tones to inform you of the condition of your radio. The following table lists these tones and when they occur. You Hear Short, Low-

Pitched Tone Long, Low-

Pitched Tone Tone Name Radio Self Test Fail Reject Time-Out Timer Warning No ACK Received Individual Call Warning Tone Time-Out Timer Timed Out Talk Prohibit/PTT Inhibit Lack of Voice PTT Time out Heard When radio fails its power-up self test. When an unauthorized request is made. Four seconds before time out. When radio fails to receive an acknowledgment. When radio is in an individual call for greater than six seconds without any activity. After time out.

(When PTT button is pressed) transmissions are not allowed. When the radio ends your call after it detected there are lack of voice for five seconds after the PTT is pressed and hold. Your ra-

dio ends the call to enable your radio to receive calls from other radio users. 54 Table continued Send Feedback Tone Name Out of Range Invalid Mode Busy Heard

(When PTT button is pressed) the radio is out of range of the sys-

tem. When radio is on an unpreprogrammed channel. When system is busy. English Valid Key-Press Radio Self Test Pass Clear Voice Priority Channel Received Emergency Alarm/Call En-

try Central Echo Volume Set Emergency Exit When a correct key is pressed. When radio passes its power-up self test. At beginning of a non-coded communication. When activity on a priority channel is received. When entering the emergency state. When central controller has received a request from a radio. When volume is changed on a quiet channel. When exiting the emergency state. Failsoft Automatic Call Back When the trunking system fails. When voice channel is available from previous request. You Hear A Group of Low-Pitched Tones Short, Medi-

um-Pitched Tone Long, Medi-

um-Pitched Tone A Group of Medium-Pitch-

ed Tones Send Feedback Table continued 55 English You Hear Short, High-

Pitched Tone

(Chirp) Two High-

Pitched Tones Ringing Gurgle Tone Name Console Acknowledge Received Individual Call Call Alert Sent Low-Battery Chirp Heard When status, emergency alarm, or reprogram request ACK is re-

ceived. When Call Alert or Private Call is received. When Call Alert is received by the target radio. When battery is below preset threshold value. GPS Fails When the GPS fails or loses signal. Fast Ringing Enhanced Call Sent Phone Call Received Dynamic Regrouping Talk Permit Unique, Low-

Pitched Chirp New Message 56 When system is searching for target of Private Call. When waiting for target of Private Call to answer the call. When a land-to-mobile phone call is received.

(When PTT button is pressed) a dynamic ID has been received.

(When PTT button is pressed) is verifying with the system for ac-

cepting its transmissions. When a new message is received. Table continued Send Feedback English You Hear Unique, High-

Pitched Chirp Unique Low-

High Tone Unique High-

Low Tone Incremental-

Pitched Tone Decremental-

Pitched Tone Tone Name Priority Status Heard When a priority message is received. MFK Enters Secondary Feature MFK Exits Secondary Fea-

ture Bluetooth Paired Bluetooth Connected Bluetooth Unpaired Bluetooth Disconnected When MFK is toggled to secondary feature. When MFK is toggled to exit secondary feature and return to pri-

mary feature or when secondary function timer expires. When Bluetooth accessory is paired with the radio. When Bluetooth accessory is connected to the radio. When Bluetooth accessory is unpaired from the radio. When Bluetooth accessory is disconnected from the radio. Send Feedback 57 English Phone Call Displays and Alerts The following phone call displays and alerts appears on the radio display when you make and receive Phone calls. The radio also uses alert tones to indicate the current status. You Hear A Long Tone You See No phone Phone busy When You press the PTT button and the phone system is not available. The phone system is busy. A Busy Tone Phone busy No acknowl-

edge A High- Pitch-

ed Tone When a channel is not available. The call is not acknowl-

edged. When you release the PTT button. Notes Press Home screen. to hang up. The radio returns to the to exit the phone mode and try your Press call later. The radio automatically connects when a channel opens. to hang up. The radio returns to the Press Home screen. The radio indicates to the landline party that the caller may begin talking. 58 Send Feedback NOTICE:

You have the option of sending additional digits (overdial), such as an extension number, credit card, or PIN numbers to the phone system. If the radio is preprogrammed for live overdial, every digit entered after the call is connected, is sent to the phone system. If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory and then sent when the PTT button is pressed. Press the PTT button to send either digits or voice, but not both at the same time. English Display Color Change On Channel This feature provides visual channel identification where users are able to have a quick visual recognition of being on a particular channel. Your radio must be preprogrammed to allow you to use this feature. When changing channels, the accessories backlight

(DRSM) changes to the preprogrammed color. The accessories backlight change to white for the following scenarios:

When changing to or powering up on an invalid channels such as unprogrammed channels, receiver frequency error channel and blank channels For hard key zeroize, key loading, and scan list programming, the backlight follows the home channel backlight color. HAZLOC Battery Type Detection This feature alerts the user when there is a HAZLOC certification mismatch between the radio and the battery. This feature supports IMPRES batteries only. During power up, if there is a mismatch, the following scenarios occurs:

The radio repetitively displays Wrong Battery with red intelligent backlight The Battery icon blinks continuously A repetitive tone sounds LED blinks RED continuously Send Feedback 59 English NOTICE:

The radio does not display any indication when the radio is connected to the charger, when the radio and battery match, or when the radio certification type is configured as "None" in Customer Programming Software (CPS). This feature is enabled through CPS configuration. Check with your dealer or system administrator for more information. 60 Send Feedback General Radio Operation This chapter explains the general radio operations in your radio. Selecting a Zone Your radio must be preprogrammed for you to use this feature. A zone is a group of channels. Do one of the following to select a radio channel. You can use these options interchangeably depending on your preference and the programmed functions. Select a zone using the radio menu Zone:

a. b. or to Zone and press the Menu Select button directly below Zone. or to the required zone, or use the keypad to enter the zone number. If the zone number entered is unprogrammed, the display shows Invalid entry. Repeat this step. c. Press the Menu Select button directly below Sel to confirm the displayed zone. Send Feedback English d. Press the PTT button to transmit on the displayed zone channel. Select a zone using the radio menu ZnUp or ZnDn:

or to ZnUp or ZnDn. a. b. Press and hold the Menu Select button directly below ZnUp or ZnDn until the required zone appears. Positions of ZnUp and ZnDn on the display may differ each time you release the Menu Select button. Read carefully before you press. c. Press the PTT button to transmit on the displayed zone channel. Selecting a Radio Channel A channel is a group of radio characteristics, such as transmit/receive frequency pairs. Do one of the following to select a radio channel. You can use the options interchangeably depending on your preference and the programmed functions. Select a channel using the preprogrammed 16 Position Select Knob to the desired channel. 61 English a. Rotate the preprogrammed 16Position Select Knob to the desired channel. b. Press the PTT button to transmit on the displayed zone channel. Select a channel using the radio menu Chan:

or to Chan. a. b. Press the Menu Select button directly below Chan. or c. to the required channel or use the keypad to enter the channel number. If the channel number entered is unprogrammed, the display shows Invalid entry. Repeat this step. d. Press the Menu Select button directly below Sel to confirm the selected channel. e. Press the PTT button to transmit on the displayed zone channel. Select a channel using the radio menu Channel Up or Channel Down:

a. or to ChUp or ChDn. 62 b. Press the Menu Select button directly below ChUp or ChDn. Positions of ChUp and ChDn on the display may differ each time you release the Menu Select button. Read carefully before you press. c. Press the PTT button to transmit on the displayed zone and channel. Selecting a Channel by using Channel Search Button This feature allows you to do a quick search for a specific channel in your radio by keying in the alias of the channel. Your radio prompts the first found channel if a match is found. 1 Perform one of the following actions:

Press the preprogrammed Channel Search button. or to Srch and press the Menu Select button directly below Srch. A blinking cursor appears on the Channel Search screen. Send Feedback 2 Use the keypad to type or edit your channel name. 3 To initiate searching, press the Menu Select button directly below Srch once the entry is done. To exit this procedure, press the Back button. One of the following scenarios occurs:

The display shows Searching. Once found, the display shows the matched channel name and the radio changes its transmission to the selected channel. If the radio is triggered to search for an empty entry, the display shows Invalid entry. Repeat step 2 to search again. If the entry does not match, the display shows Channel name not found.Repeat step 2 to search again; or press or the Back button to exit. Mode Select Feature Mode Select allows a long press to save the current zone and channel of your radio to a programmable button, keypad button, or a softkey; then once programmed, the short-press of that button or softkey changes the transmission to the saved zone and channel. Send Feedback English There are two methods to save the selected zone and channel:

Softkeys Programmable buttons and keypad buttons (digit 0 to 9) NOTICE:

Your radio must be preprogrammed for you to use this feature. Saving a Zone and a Channel to a Softkey Five softkeys are available for you to save the frequently used zone and channel. 1 Toggle from your current zone and channel to the required zone and channel. 2 or to MS1, MS2 ... or MS5. 3 Press and hold the Menu Select button directly below one of the softkey (MS1MS5). You hear a short, medium-pitched tone when the zone and channel is saved. 63 English NOTICE:

To change the programmed zone and channel, repeat this procedure. Short press of the programmed softkey changes your current transmission to the zone and channel programmed in this softkey. Saving a Zone and a Channel to a Button You can save the frequently used zone and channel to the programmable buttons and keypad digit 0 to 9 buttons. 1 Toggle from your current zone and channel to the required zone and channel. 2 Press and hold the button you desire to program. You hear a short, medium-pitched tone when the zone and channel is saved. NOTICE:

Repeat this procedure to change the zone and channel of the programmed button. Short press of the programmed button changes your current transmission to the zone and channel programmed in this button. 64 Receiving and Responding to a Radio Call Once you have selected the required channel and/or zone, you can proceed to receive and respond to calls. The radio shows different indicators based on the system the radio is configured. The LED lights up solid red while the radio is transmitting. In conventional mode, the LED lights up solid yellow when the radio is receiving a transmission. In trunking mode, there is no LED indication when the radio receives a transmission. If the radio is receiving a secure transmission, the LED blinks yellow. Receiving and Responding to a Talkgroup Call To receive a call from a group of users, your radio must be configured as part of that talkgroup. Send Feedback When you receive a talkgroup call (while on the Home screen) the radio displays the following depending on the system your radio is configured to:

For ASTRO Conventional system, the LED lights up solid yellow. The display shows the talkgroup alias or ID, and the caller alias or ID. For Trunking system, the display shows the caller alias or ID. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 2 Press the PTT button to respond to the call. The LED lights up solid red. 3 Release the PTT button to listen. See also Making a Talkgroup Call on page 67 for details on making a Talkgroup Call. Receiving and Responding to a Private Call (Trunking Only) A Private Call is a call from one individual radio to another. English The one-to-one call between the two radios are not heard by the others in the current talkgroup. The calling radio automatically verifies that the receiving radio is active on the system and can display the caller ID. NOTICE:

With the inactivity timer enabled (optional), when there is no response from the receiving radio, the calling radio exits the call with Menu Inactive Exit tone after the timer expires. When you receive a Private Call, you hear two alert tones and the LED blinks green. The display shows Call received and the call received icon blinks. 1 Perform one of the following actions:

Press the Menu Select button directly below Resp. Press the Call Response button within 20 seconds after the call indicators begin. If the caller alias is in the call list, the display shows the caller alias during the call. If the caller name is not in the call list, the display shows the caller ID. Send Feedback 65 English 2 Press and hold the PTT button to talk. Release the PTT button to listen. 2 Press and hold the PTT button to talk. Release the PTT button to listen. 3 Press or the Call Response button to hang up and return to the Home screen. 3 Press or the Call Response button to hang up and return to the Home screen. See also Making a Private Call (Trunking Only) on page 67 for details on making a Private Call. See also Making a Telephone Call (Trunking Only) on page 69 for details on making a Telephone Call. Receiving and Responding to a Telephone Call (Trunking Only) This feature allows you to receive calls similar to standard phone calls from a landline phone. NOTICE:

With the inactivity timer enabled (optional), if there is no response to the call after the timer expires, your radio exits the call with Menu Inactive Exit tone. When you receive a Telephone Call, you hear a telephone-

type ringing and the LED blinks green. The display shows Phone call and the call received icon blinks. Methods to Make a Radio Call You can select a zone, channel, subscriber ID, or talkgroup by using:

The 16-Position Select Channel Knob. The Contacts list (see Viewing Details of a Contact on page 86). NOTICE:

The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. 1 Press the Call Response button within 20 seconds after the call indicators begin. 66 Send Feedback Making a Talkgroup Call To make a call to a group of users, your radio must be configured as part of that talkgroup. 1 Turn the 16-Position Select Channel Knob to select the channel with the desired talkgroup. Making a Private Call (Trunking Only) Your radio must be preprogrammed for you to use this feature. This feature allows you to send an individual Call Alert or page if there is no answer from the target radio. English 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 1 3 Press the PTT button to make the call. The radio shows different indicators based on the system the radio is configured. For ASTRO Conventional system, the LED lights up solid red. The display shows the talkgroup alias or ID. For Trunking system, the LED lights up solid red. 4 Speak clearly into the microphone. 5 Release the PTT button to listen. or to Call, and press the Menu Select button directly below Call. The display shows the last transmitted or received ID. 2 To select the required ID, perform one of the following actions:

Press the Menu Select button directly below Cnts to scroll through and select the required ID. Press the Menu Select button directly below LNum to go to the last number dialed. or Use the keypad to enter the required ID. to the required ID. Send Feedback 67 English 3 Press the PTT button to initiate the Private Call. The display shows Calling... <Number>. Sending a Call Alert Page on page 91 for more information. 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. When you are connected, the display shows the ID of the target radio. If no acknowledgment is received, the display shows No acknowledge. 5 Press and hold the PTT button to talk. Release the PTT button to listen. 6 Press to return to the Home screen. Making an Enhanced Private Call

(Trunking Only) Your radio must be preprogrammed to allow you to use this feature. This feature allows you to send an individual Call Alert Page if there is no answer from the target radio. See 1 or to Call, and press the Menu Select button directly below Call. The display shows the last transmitted or received ID. 2 To select the required ID, perform one of the following actions:

Press the Menu Select button directly below Cnts to scroll through and select the required ID. Press the Menu Select button directly below LNum to go to the last number dialed. or Use the keypad to enter the required ID. to the required ID. 3 Press the PTT button to initiate the Private Call. The display shows Calling... <Number>. 68 Send Feedback 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. When you are connected, the display shows the ID of the target radio. If no acknowledgment is received, the display shows No acknowledge. If the target radio does not respond before the time out, the display shows No answer. 5 Press and hold the PTT button to talk. Release the PTT button to listen. 6 Press to return to the Home screen. English Making a Telephone Call (Trunking Only) This feature allows you to make calls similar to standard phone calls to a mobile or landline phone. 1 or to Phon, and press the Menu Select button directly below Phon. The display shows the last transmitted or received ID. 2 To select the required ID, perform one of the following actions:

Press the Menu Select button directly below Cnts to scroll through and select the required ID. Press the Menu Select button directly below LNum to go to the last number dialed. or Use the keypad to enter the required phone to the required phone number. number. 3 Press the PTT button to dial the phone number. Send Feedback 69 English 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. Press the preprogrammed Repeater/Direct switch to toggle between talkaround and repeater modes. 5 When your call is answered, press and hold the PTT button to talk. Release the PTT button to listen. or to Dir and press the Menu Select button directly below Dir. 6 Press to return to the Home screen. See Phone Call Displays and Alerts on page 58 for more information if your call is not answered. Switching Between Repeater or Direct Operation Button The Repeater Operation increases the radio coverage area by connecting with other radios through a repeater. The transmit and receive frequencies are different. The Direct or talkaround operation allows you to bypass the repeater and connect directly to another radio. The transmit and receive frequencies are the same. Perform one of the following actions:

The display shows Repeater mode if the radio is currently in Repeater mode. The display shows Direct mode and the Talkaround icon if the radio is currently in Direct mode (during conventional operation only). Monitor Feature The monitor feature is used to make sure that a channel is clear before transmitting. The lack of static on a digital channel when the users switch from analog to digital radios is not an indication that the radio is malfunctioning. Digital technology quiets the transmission by removing the noise from the signal and allows only the clear voice or data information to be heard. 70 Send Feedback English Monitoring a Channel Do one of the followings to monitor a channel. You can use these options interchangeably depending on your preference and the programmed functions. d. Press and hold the PTT button to transmit. The LED lights up solid red. e. Release the PTT button to receive (listen). Monitoring a Channel with Monitor button. a. Press the preprogrammed Monitor button. b. Adjust the Volume Control Knob if necessary. c. Press and hold the PTT button to transmit. The LED lights up solid red. d. Release the PTT button to receive (listen). The Carrier Squelch indicator appears on the display when you monitor a channel using the preprogrammed Monitor button. Monitoring a Channel using the selected zone channel. a. Select the desired zone and channel. b. Listen for a transmission. c. Adjust the Volume Control Knob if necessary. Monitoring Conventional Mode Your radio may be preprogrammed to receive Private-Line

(PL) calls. 1 Momentarily press the Monitor button to listen for activity. The Carrier Squelch indicator appears on the display. 2 Press and hold the Monitor button to set continuous monitor operation. The duration of the button press is programmable. 3 Press the Monitor button again, or the PTT button, to return to the original squelch setting. If you try to transmit on a receive-only channel, you hear an invalid tone until you release the PTT button. Send Feedback 71 English 72 This page intentionally left blank. Advanced Features This chapter explains the operations of the features available in your radio. Advanced Call Features This chapter explains the operations of the call features available in your radio. Selective Call (ASTRO Conventional Only) A Selective Call is a call from an individual radio to another individual radio with privacy. Receiving a Selective Call When you receive a Selective Call, the radio indicates one of the followings:

You hear two alert tones and the LED lights up solid yellow to indicate the transmitting radio is still sending signal. The call received icons blinks and the display shows Call received. English The LED blinks solid green once to indicate the transmitting radio is pending to receive signal. The speaker unmutes. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 2 Press and hold the PTT button to talk. Release the PTT button to listen. Making a Selective Call Your radio must be preprogrammed for you to use this feature. 1 or to Call, and press the Menu Select button directly below Call. The display shows the last transmitted or received ID. 2 To select the required ID, perform one of the following actions:

Press the Menu Select button directly below Cnts to scroll through and select the required ID. Send Feedback 73 English Press the Menu Select button directly below LNum to go to the last number dialed. or Use the keypad to enter the required ID. to the required ID. 3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. NOTICE:

Encryption keys are associated to talkgroups. When talkgroups are associated, encryption keys are changed by changing the active talkgroup. See Secure Operations on page 122 for more information. Selecting a Talkgroup 4 Press and hold the PTT button to start the Selective Call. The display shows the ID of the target radio. 1 or to Tgrp and press the Menu Select button directly below Tgrp. The display shows the last Talkgroup that was selected and stored. 2 Perform one of the following actions:

or to Preset for the preset preprogrammed Talkgroup. Use the keypad to enter the number of the corresponding Talkgroup in the list. 5 Release the PTT button to listen. 6 Press to return to the Home screen. Talkgroup Call Feature (Conventional Operation Only) This feature allows you to define a group of conventional system users so that they can share the use of a conventional channel. 74 Send Feedback 3 Press the Menu Select button directly below Sel to save the currently selected Talkgroup and return to the Home screen. If the encryption key associated to the new Talkgroup is erased, you hear a momentary key fail tone and the display shows Key fail. If the encryption key that is associated to the new Talkgroup is not allowed, you hear a momentary key fail tone and the display shows Illegal key. 4 Press to return to the Home screen. Sending a Status Call This feature allows you to send data calls to the dispatcher about a predefined status. Each status can have up to a 14-character name. A maximum of eight status conditions is possible. NOTICE:

The radio automatically exits the feature, if the feature inactivity timer is enabled. You will hear the Menu Inactive Exit Tone upon feature exit. 1 Perform one of the following actions:

Send Feedback English Press the preprogrammed Status button. to Sts and press the Menu Select button or directly below Sts. The display shows the last acknowledged status call, or the first status in the list. 2 Perform one of the following actions:

Use the keypad to enter a number corresponding to the location in the status list. 3 Press the PTT button to send the status. When the dispatcher acknowledges, you hear four tones and the display shows Ack received. The radio returns to normal dispatch operation. If no acknowledgment is received, you hear a low-

pitched tone and the display shows No acknowledge. 4 Press to return to the Home screen. No traffic is heard on trunked channels while Status Calls is selected. If the radio detects no Status Call 75 English activity for six seconds, an alert tone sounds until you press or the PTT button. Gurgle tone and the display shows the dynamically regrouped channels name. Responding to the Dynamic Regrouping Feature (Trunking Only) This feature allows the dispatcher to temporarily reassign selected radios to a particular channel where they can communicate with each other. This feature is typically used during special operations and is enabled by a qualified radio technician. You will not notice whether your radio has this feature enabled until a dynamic regrouping command is sent by the dispatcher. NOTICE:

If you try to access a zone or channel that has been reserved by the dispatcher as a dynamically regrouped mode for other users, you hear an invalid tone. When your radio is dynamically regrouped, it automatically switches to the dynamically regrouped channel. You hear a Press the PTT button to talk. Release PTT button to listen. When the dispatcher cancels dynamic regrouping, the radio automatically returns to the zone and channel that you were using before the radio was dynamically regrouped. Requesting a Reprogram (Trunking Only) This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment. Perform one of the following actions:

Press the preprogrammed Reprogram Request button to send reprogram request to the dispatcher. 76 Send Feedback or to Rpgm then press the Menu Select button directly below Rpgm to send reprogram request to the dispatcher. The display shows Reprogram Rqst and Please wait. If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows Ack received and the radio returns to the Home screen. If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-pitched alert tone and the display shows No acknowledge. Try again or press to cancel and return to the Home screen. Classification of Regrouped Radios The dispatcher can classify regrouped radios into either of two categories:

Select Enabled Select-enabled radios are free to change to any available channel, including the dynamic-regrouping channel, once the user has selected the dynamic-

regrouping position. English Select Disabled Select-disabled radios cannot change channels while dynamically regrouped. The dispatcher has forced the radio to remain on the dynamic-regrouping channel. The Scan or Private Call feature cannot be selected while your radio is Select Disabled. Dynamic Zone Programming (DZP) NOTICE:

Your radio must be preprogrammed to allow you to use this feature. This feature works on the condition at least one zone in the radio must be a non-

dynamic zone. This feature provides one or more Dynamic Zones to store frequently used channels be it conventional or trunking. These dynamic channels are saved from pre-existing (non-

dynamic) channels in the radio. This saves the time and effort from the regular navigation around the working zones and channels. User can also delete or update the list in the Dynamic Zone. Send Feedback 77 English Entering the Dynamic Zone to Select a Dynamic Channel 1 2 or to Zone then press the Menu Select button directly below Zone. The display shows the Zone screen. or to <# Dynamic Zone Channels>.2 3 Perform one of the following actions:

Press the Menu Select button below Sel to select. Press the Menu Select button below Exit to exit. If you have selected one of the Dynamic Zone Channels list, the display returns to Home screen with the selected <# Dynamic Zone Channels>

shown on the screen.2 If you have selected Exit without selecting any Dynamic Zone Channels list, the display returns to Home screen without any changes. Saving a Channel in the Dynamic Zone from List Selection The radio must be in Dynamic Zone in order to perform this operation. 1 or to ZnPr. Press the Menu Select button directly below ZnPr to enter Program Zone screen. 2 Press the Menu Select button directly below Edit. The display shows Search Options screen. 3 4 or to List Selection. Press the Menu Select button directly below Sel. The display shows Select Zone screen. or to the required zone. Press the Menu Select button directly below Sel. The display shows Select Chan screen. 2 # indicates number of the channel on the 16-Position Switch which are numbered from 1 to 16. 78 Send Feedback 5 or to the required channel. Press the Menu Select button directly below Sel. The display shows Channel updated. 6 Press the Back button to return to Home screen. Saving a Channel in the Dynamic Zone from Channel Name The radio must be in Dynamic Zone in order to perform this operation. 1 or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone screen. 2 Press the Menu Select button directly below Edit. The display shows Search Options screen. 3 or to Channel Name then press the Menu Select button directly below Sel. The display shows a blinking cursor on the Channel Name screen. English 4 Use the keypad to type or edit the channel name. 5 Press the Menu Select button directly below Srch once the entry is done to initiate searching. You can cancel this operation at this step by pressing the Back button to return to Search Options screen. The display shows Searching.... Once found, the display shows Channel updated. If the radio is triggered to search for an empty entry, the display shows Invalid entry. If the entry does not match, the display shows Channel name not found. Repeat from step 4 or step 5 to search again. 6 Press to return to the Home screen. Deleting a Channel in the Dynamic Zone The radio must be in Dynamic Zone in order to perform this operation. Send Feedback 79 English 1 2 or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone screen. The display shows the dynamic channels list. or to the saved dynamic channel then press the Menu Select button directly below Del. The display shows Channel deleted screen. 3 Press the Back button to return to Home screen. The Home screen shows <Dynamic Zone Channels>. If the channel deleted is the Home channel, the Home screen shows <Zone Name>Blank. Contacts This feature provides address-book capabilities on your radio. Each entry corresponds to an alias (name) or ID

(number) that you use to initiate a call. Contact entries are alphabetically sorted according to entry alias. Each alias can have up to five IDs of different call types associated with it. Additionally, each entry, depending on context

(conventional, trunking, or phone), associates with one or more of the four types of calls: Phone Call, Selective Call, Private Call, or Call Alert. Each entry within Contacts contains the following information:

Call Alias (Name) Call ID (Number) Call Type (Icon) WACN ID (Astro 25 Trunking IDs only) System ID NOTICE:

Your radio must be preprogrammed to allow you to add, edit, or delete the contact entries. Your radio also supports a maximum of 50 call lists. Each list can store up to 100 IDs (numbers). 80 Send Feedback NOTICE:

Your radio is preprogrammed with a number of contacts per Call Lists. Check with your dealer or system administrator for more information. The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You hear the Menu Inactive Exit Tone upon feature exit. 4 5 English or to scroll through the available IDs for the selected subscriber alias and proceed to step 6. or to Call and press the Menu Select button directly below Sel. or to select the call type. Making a Private Call from Contacts Your radio must be preprogrammed to allow you to use this feature. 1 2 or to Cnts and press the Menu Select button directly below Cnts. The entries are alphabetically sorted. or to the required subscriber alias. 3 Perform one of the following actions:

Press the Menu Select button directly below Optn and proceed to the next step. 6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 7 Press the PTT button to initiate the call. During the call, the display shows the subscriber alias. 8 Press and hold the PTT button to talk. Release the PTT button to listen. The LED lights up solid red when the PTT button is pressed. If there is no voice activity for a preprogrammed period of time, the call ends. If the call reaches the maximum ring time, the call ends. Send Feedback 81 English Adding a New Contact Entry 6 1 2 3 or to Cnts and press the Menu Select button directly below Cnts. The entries are alphabetically sorted. or to [New Contact] and press the Menu Select button directly below Sel. or to Name and press the Menu Select button directly below Edit. The display shows Edit name and a blinking cursor appears. 4 Use the keypad to enter the name and press the Menu Select button directly below Ok once you have entered the name. To cancel this operation, press the Back button to return to the previous screen. or to [Add Number] and press the Menu Select button directly below Sel. 5 82 or to Number 1 and press the Menu Select button directly below Edit. The display shows Edit Num 1 and a blinking cursor appears. 7 Use the keypad to enter the number and press the Menu Select button directly below Ok once you have entered the number. To cancel this operation, press the Back button to return to the previous screen. 8 Perform one of the following actions per the information you need to add to current name:

to Type 1 and press the Menu Select or button directly below Edit. or to the required mode and press the Menu Select button directly below Ok. Repeat step 6 through step 7 to enter or edit the existing system IDs. Repeat step 5 through step 7 to add a new number. Send Feedback 9 Press the Menu Select button directly below Done once you have finished. The display shows <Entry> Stored, confirming that the contact entry has been added. The radio returns to the main Contacts screen. 4 Select the Menu Select button directly below Yes to delete the entry, or No to cancel and return to the main screen of Contacts. The display shows <Entry> deleted and the radio returns to the main screen of Contacts. Deleting a Contact Entry Adding a Contact to a Call List English 1 2 3 or to Cnts and press the Menu Select button directly below Cnts. The entries are alphabetically sorted. or to the entry you want to delete and press the Menu Select button directly below Optn. or to Del and press the Menu Select button directly below Sel. The display shows <Entry> confirm del?. 1 2 3 or to Cnts and press the Menu Select button directly below Cnts. The entries are alphabetically sorted. or to the entry you want to add and press the Menu Select button directly below Optn. or to Add to CallLst and press the Menu Select button directly below Sel. 4 Perform one of the following actions:

or to the required Call List and press the Menu Select button directly below Add to add to the Call List. Send Feedback 83 English or to Cncl to cancel and return to the main screen of Contacts. The display shows Please wait momentarily before showing <Entry> added to Call List, confirming the addition of the contact to the list. The radio returns to the main display of Contacts. Removing a Contact from a Call List or to Cnts and press the Menu Select button directly below Cnts. The entries are alphabetically sorted. or to the entry you want to delete and press the Menu Select button directly below Optn. or to Rm frm CallLst and press the Menu Select button directly below Sel. The display shows Remove <Entry> frm Call List?. 1 2 3 84 4 Press the Menu Select button directly below Yes to remove the entry from the Call List, or No to cancel and return to the main display of Contacts. The display shows Please wait momentarily before showing <Entry> removed from Call List, confirming the removal of the contact from the list. The radio returns to the main display of Contacts. Methods of Contact Editing in a Call List This feature allows you to edit contacts in a call list. Editing an Entry Alias 1 2 or to Cnts and press the Menu Select button directly below Cnts. The entries are alphabetically sorted. or to the entry you want to edit and press the Menu Select button directly below Optn. Send Feedback 3 4 or to Edit and press the Menu Select button directly below Sel. or to the entry alias you wish to change and press the Menu Select button directly below Edit. A blinking cursor appears. 2 3 4 5 Use the keypad to edit the name and press the Menu Select button directly below Ok once you have finished. The display returns to the Edit Contact screen. 6 Press the Menu Select button directly below Done to save your changes and return to the main screen of Contacts. Editing as Entry ID 1 or to Cnts and press the Menu Select button directly below Cnts. The entries are alphabetically sorted. English or to the entry you want to edit and press the Menu Select button directly below Optn. or to Edit and press the Menu Select button directly below Sel. or to the entry ID you wish to change and press the Menu Select button directly below Edit. A blinking cursor appears. 5 Use the keypad to edit the number and press the Menu Select button directly below Ok once you have finished. The display returns to the Edit Contact screen. 6 Press the Menu Select button directly below Done to save your changes and return to the main screen of Contacts. Editing a Call Type 1 or to Cnts and press the Menu Select button directly below Cnts. Send Feedback 85 English The entries are alphabetically sorted. 2 3 4 5 or to the entry you want to edit and press the Menu Select button directly below Optn. or to Edit and press the Menu Select button directly below Sel. or to Type and press the Menu Select button directly below Edit. or to choose from the list of call types given and press the Menu Select button directly below Ok. The display returns to the Edit Contact screen. 6 Press the Menu Select button directly below Done to save your changes and return to the main screen of Contacts. Viewing Details of a Contact or to Cnts and press the Menu Select button directly below Cnts. The entries are alphabetically sorted. 1 86 2 3 or to the entry you want to view and press the Menu Select button directly below Optn. or to View and press the Menu Select button directly below Sel. The display shows all the numbers associated with the entry. Scan Lists Scan lists are created and assigned to individual channels/

groups. Your radio scans for voice activity by cycling through the channel/group sequence specified in the scan list for the current channel/group. Your radio supports different types of Scan Lists:

Trunking Priority Monitor Scan List Conventional Scan List Talkgroup Scan List Please refer to a qualified radio technician for the maximum number of Scan Lists can be programmed in your radio. These lists must be preprogrammed by a qualified radio technician. Send Feedback Viewing a Scan List or to ScnL then press the Menu Select button directly below ScnL. English 1 2 or to ScnL and press the Menu Select button directly below ScnL. or to view the members on the list. 3 Press the Home screen. to exit the current display and return to Editing the Scan List This feature allows you to change scan list members and priorities. 1 Perform one of the following actions:

Long press the preprogrammed Scan List Programming button (side button). Move the preprogrammed Scan List Programming switch to programming position. The display shows the lists that can be changed. 2 or to the entry you want to edit. 3 Perform one of the following actions:

Press the Top Side button to add and/or change the priority of the currently displayed channel in the scan list. Press the Menu Select button directly below Del to delete the currently displayed channel from the scan list. Press the Menu Select button directly below Rcl to view the next member of the scan list. 4 Perform one of the following actions to select another channel that needs to be added or deleted then repeat step 3. Otherwise, proceed to the next step. Use the keypad to enter the desired channel to the desired channel. or name. Send Feedback 87 English 5 Perform one of the following actions:

Move the Scan List Programming switch out of programming position. Press to exit scan list programming and return to the Home screen. See Viewing and Changing the Priority Status on page 88 for more information on how to add and/or change the priority of the currently displayed channel in the scan list. Changing the Scan List Status 1 Perform one of the following actions:

Press the Select button once to add the currently displayed channel to the scan list. Press the Select button one or more times to change the scan list status icon of the currently displayed channel. 4 Perform one of the following actions:

or to select more list members whose scan status you want to change. Use the keypad to go directly to that scan list member. Use the 16-Position Select knob to select another scan list member. Long press the preprogrammed Scan List Programming button (side button). Move the preprogrammed Scan List Programming switch to programming position. The display shows the programming mode icon and the first list member. 5 Press the Home screen. to exit scan list programming and return to Viewing and Changing the Priority Status 2 or to the member you want to edit. Perform one of the following actions:

3 Perform one of the following actions:

88 Send Feedback Press the Menu Select button directly below Sel one or more times to change the priority status of the current displayed channel. Press the Select button one or more times to toggle between different status of the Scan List status icon of the current displayed channel. The radio shows one of following priority status icons and scenarios:

A Scan icon indicates that the current channel is in the scan list as a non-priority channel. The LED lights up solid green. A Priority-One Channel Scan icon indicates that the current channel is in the scan list as the Priority-One channel. The LED rapidly blinks green. You hear all traffic on the Priority-One channel, regardless of traffic on non-priority channels. A Priority-Two Channel Scan icon indicates that the current channel is in the scan list as the Priority-Two channel. The LED blinks green. No icon indicates that the current channel is deleted from the scan list. English Scan This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of channels. Turning Scan On or Off Perform one of the following actions:

Press the preprogrammed Scan button to toggle Scan On or Scan Off to initiate or stop scan. or to Scan and press the Menu Select button directly below Scan. If the scan is enabled, the display shows Scan on and the scan status icon. If the scan is disabled, the display shows Scan Off. The radio returns to the Home screen. Making a Dynamic Priority Change

(Conventional Scan Only) While the radio is scanning, the dynamic priority change feature allows you to temporarily change any channel in a Send Feedback 89 English scan list (except for the Priority-One channel) to the Priority-Two channel. This change remains in effect until scan is turned off. Scan then reverts to the preprogrammed (original) setting. Making a Dynamic Priority Change using the preprogrammed Dynamic Priority button:

a. When the radio locks onto the channel designated as the new Priority-Two channel, press the preprogrammed Dynamic Priority button. The radio continues scanning the remaining channels in the list. Deleting a Nuisance Channel If a channel continually generates unwanted calls or noise

(termed nuisance channel), you can temporarily remove the unwanted channel from the scan list. This capability does not apply to priority channels or the designated transmit channel. When the radio is locked onto the channel to be deleted, perform one of the following actions:

Press the preprogrammed Nuisance Delete button. or to Nuis and press the Menu Select button directly below Nuis. The radio continues scanning the remaining channels in the list. Restoring a Nuisance Channel To restore the deleted nuisance channel, perform one of the following actions:

Stop and restart a scan. Mode change to another channel and back to the original channel. Turn off the radio and then turn it on again. Nuisance mode delete can be disabled by the system administrator. Call Alert Paging This feature allows your radio to work like a pager. 90 Send Feedback Even if other users are away from their radios, or if they are unable to hear their radios, you can send them an individual Call Alert page. You can also verify if a radio is active on the system. Depending on how your radio is programmed, when you make an Enhanced Private Call, the radio either automatically sends a call alert page if there is no answer after the maximum ring time, or when you press the PTT button. NOTICE:

This feature must be preprogrammed by a qualified radio technician. Receiving a Call Alert Page When you receive a Call Alert page, you hear four repeating alert tones and the LED blinks green. The call received icons blinks and the display shows Page received. Press any button to clear the Call Alert page. See Making a Talkgroup Call on page 67 or Making a Private Call (Trunking Only) on page 67 for more information on returning the call. English Sending a Call Alert Page Do one of the following to send a call alert page:

NOTICE:

If the feature inactivity timer is enabled, your radio automatically exits the feature when your radio is left idle long enough for the time to expire. You hear the Menu Inactive Exit Tone upon feature exit. Sending a call alert page using the radio menu Page:

a. b. Press the Menu Select button directly below to Page. or Page. c. Press the Menu Select button directly below Cnts to view the required ID, required ID, or use the keypad to enter the required ID. or to the d. Press the PTT button to send the page. The display shows Paging...<Number>. If the call alert page is sent successfully, you hear a tone and the display shows Ack received. The radio returns to the Home screen. Send Feedback 91 English If the call alert page is not acknowledged, you hear a low tone and the display shows No acknowledge. Press the Menu Select button directly below Ok to return to the main screen of Contacts. If the call alert page is not acknowledged, you hear a low tone and the display shows No acknowledge. Press the Menu Select button directly below Ok to return to the main screen of Contacts. Sending a call alert page using the radio menu Call:

or to Call. a. b. Press the Menu Select button directly below Call. c. to select the alias or ID, and press the or PTT button to initiate the call. If the target radio does not respond after a preprogrammed period of time, the display shows Send page?. d. To send the call alert page, press the Menu Select button directly below Yes. To exit the screen without sending the call alert page, press the Menu Select button directly below No. The display shows Paging...<Alias>. If the call alert page is sent successfully, you hear a tone and the display shows Ack received. The radio returns to the Home screen. Quick Call II (ASTRO P25 Digital Trunking and Conventional) This feature allows the user to broadcast a series of distinct, recognizable tones before a voice transmission from the dispatcher or a radio. The broadcasting dispatcher or radio user can select this alert tone transmission to be sent to an individual Talkgroup or over the entire system. Specific tone or series of tones are pre-programmed into the radios to allow the dispatcher or supervisor to select a list of tones to broadcast before they make their voice transmission. Each tone is distinctive to indicate different situation or different broadcaster. The transmitting radio also plays back the tones for the broadcaster to listen. 92 Send Feedback NOTICE:

The receiving radios must be configured with the Quick Call II tone in order for the radio to sound the selected tone and also to sound a preconfigured alert tone after the selected tone has sound. Initiating a Quick Call II Transmission The broadcasting or transmitting radio must be pre-

programmed to see the tone in the Quick Call II tone list. The receiving radio must also be pre-programmed to decode the tone to broadcast. 1 2 or to QCII, and press the Menu Select button directly below QCII. or to select the tone to broadcast. 3 Press the PTT to broadcast the selected tone, or press and hold the PTT to broadcast the selected tone and transmit with your vocal transmission. You hear the radio sounds the selected tone. You can begin your call after the tone ends. 4 Release PTT to listen. Send Feedback English Emergency Operation The Emergency feature is used to indicate a critical situation. If the Top (Orange) button is preprogrammed to send an emergency signal, this signal overrides any other communication over the selected channel. Your radio supports the following Emergency modes:

Emergency Alarm Emergency Call (Trunking Only) Emergency Alarm with Emergency Call Silent Emergency Alarm Check with your dealer or system administrator for more information on the programming of this feature. Only one of the Emergency modes above can be assigned to the preprogrammed Emergency button. 93 English NOTICE:

To exit emergency at any time, press and hold the preprogrammed Emergency button for about a second. This timer is programmable from 06250 milliseconds by a qualified technician. The radio operates in the normal dispatch manner while in Emergency Call, except if enabled, it returns to one of the following:

Tactical/Non-Revert The radio sends emergency alarm and/or make emergency call on the current selected channel. Non-Tactical/Revert for Conventional system The radio reverts to the preprogrammed emergency channel to send alarm and/or make emergency call. Non-Tactical/Revert for Trunking system The radio reverts to the preprogrammed emergency talkgroup to send alarm and/or make emergency call. Sending an Emergency Alarm This feature allows you to send a data transmission, which identifies the radio sending the emergency, to the dispatcher. 94 NOTICE:

The default timer of Emergency button press to activate Emergency is 300 milliseconds. This timer is programmable from 3006200 milliseconds by a qualified technician. Press the preprogrammed Emergency button. One of the following scenarios occurs:

The display shows Emergency and the current zone or channel. You hear a short medium-

pitched tone and the LED blinks red momentarily. The radio sounds a short low-pitched tone to indicate that the selected channel does not support emergency and rejects to launch emergency mode. The display shows No emergency, if the selected channel does not support emergency. When you receive the dispatchers acknowledgment, the display shows Ack received. Four tones sound, the alarm ends, and the radio exits the Emergency Alarm mode. If no acknowledgement is received, the display shows No acknowledge. The alarm ends when the timer expires and the radio exits the Emergency Alarm mode. Send Feedback English Sending an Emergency Call (Trunking Only) This feature gives your radio priority access to a talkgroup. 1 Press the preprogrammed Emergency button. One of the following scenarios occurs:

The display shows Emergency on the current zone and channel. You hear a short medium-

pitched tone and the LED blinks red momentarily. You hear the radio sounds a short low-pitched tone to indicate the selected channel does not support emergency and rejects to launch emergency mode. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press and hold the PTT button. Speak clearly into the microphone. 4 Release the PTT button to end the transmission and wait for a response from the dispatcher. 5 To exit Emergency Call, press and hold the preprogrammed Emergency button for about a second. Sending An Emergency Call With Hot Mic (Trunking Only) This feature allows you to send an Emergency Call with hot mic to a group of radios. Your radio must be programmed for this type of operation. Your radio microphone is automatically activated, allowing you to communicate with the group of radios without pressing the PTT button. This activated microphone state is also known as hot mic. The hot mic applies to the first voice transmission from your radio during the Emergency call. For subsequent transmissions in the same Emergency call, you must press the PTT button. Follow the procedure to send Emergency Call with hot mic on your radio. 1 Press the preprogrammed Emergency button. One of the following scenarios occurs:

Send Feedback 95 English The display shows Emergency on the current zone and channel. A tone sounds and the LED blinks red momentarily. A tone sounds to indicate the selected channel does not support emergency and rejects to launch emergency mode. Sending an Emergency Alarm with Emergency Call This feature gives your radio priority access on a channel for conventional system, and to a talkgroup for trunking system. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 The microphone remains active for the hot mic time specified in the radio's codeplug programming. 4 To exit Emergency Call, press and hold the preprogrammed Emergency button. 1 Press the preprogrammed Emergency button. If successful, the display shows Emergency on the current zone and channel. You hear a short, medium-pitched tone and the LED blinks red momentarily. The radio exits Emergency Alarm and enters the Emergency Call state when one of the following scenarios occur:

You receive the dispatcher acknowledgment. The display shows Ack received. You receive no acknowledgement. The display shows No acknowledge. You press the PTT button while in the Emergency Alarm mode. If unsuccessful, you hear the radio sounds a short low-pitched tone to indicate the selected channel 96 Send Feedback English does not support emergency and rejects to launch emergency mode. Follow the procedure to send Emergency Alarms and Call with hot mic on your radio. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press and hold the PTT button. Speak clearly into the microphone. 4 Release the PTT button to end the transmission and wait for a response from the dispatcher. 5 To exit Emergency Call, press and hold the preprogrammed Emergency button for about a second. Turning off the radio also cancels the emergency state. Sending An Emergency Alarm and Call with Hot Mic This feature allows you to send an Emergency Alarm and Call with hot mic to a group of radios. Your radio must be programmed for this type of operation. Send Feedback 1 Press the preprogrammed Emergency button. If successful, the display shows Emergency on the current zone and channel. A tone sounds and the LED blinks red momentarily. The radio exits Emergency Alarm and enters the Emergency Call state when one of the following scenarios occur:

You receive the dispatcher acknowledgment. The display shows Ack received. You receive no acknowledgement. The display shows No acknowledge. If unsuccessful, a tone sounds to indicate the selected channel does not support emergency and rejects to launch emergency mode. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 The microphone remains active for the hot mic time specified in your radio's codeplug programming. 97 English 4 To exit Emergency Call, press and hold the preprogrammed Emergency button. Turning off the radio also cancels the emergency state. Sending a Silent Emergency Alarm This feature allows you to send an Emergency Alarm to the system without triggering any audio or visual indicators. 1 Press the preprogrammed Emergency button. The display shows no changes, the LED does not light up, and you hear no tones. The silent emergency state continues until you perform the next step. 2 Perform one of the following actions:

Press and hold the preprogrammed Emergency button for about a second to exit the Silent Emergency Alarm mode. Press and release the PTT button to exit the Silent Emergency Alarm mode and enter regular dispatch or Emergency Call mode. Change of Channels during Emergency For ALL Emergency transmissions, when changing channels:

If the new channel is also preprogrammed for Emergency, you can change channels while in Emergency operation. The emergency alarm or call continues on the new channel. If the new channel is not preprogrammed for Emergency, the display shows No emergency, and you hear an invalid tone until you exit the Emergency state or change to a channel preprogrammed for Emergency. Emergency Keep-Alive Feature NOTICE:

The radio only exits the Emergency state using one of the ways mentioned in the previous sections. See Sending an Emergency Alarm on page 94, Sending an Emergency Call (Trunking Only) on page 95, Sending an Emergency Alarm with Emergency Call on page 96, or Sending a Silent Emergency Alarm on page 98. 98 Send Feedback Incident Management Software Fireground The portable Fireground Communications System is designed for deployment at an incident scene. It consists of central components:

Your APX portable radios Command Terminal Radio Frequency (RF) Modem (Conventional Only) Control Channel Radio (Trunking) Optional Data Radio (Trunking) Accountability Server (Trunking) DVRS (Optional) These components provide on-scene and inbuilding radio coverage, and enhanced personnel accountability and monitoring. The radio helps to indicate your presence on the scene if it is in the range of the Incident Commander command terminal, or trunking radio system. Each Fireground Communication System radio automatically reports your radio ID on the commander mobile command terminal. Your name, riding position and Send Feedback English sector are all can be configured to be seen at the Commanders command terminal. If you have a critical situation, you can press the Emergency button which activates an alarm on the Incident Management Software at the command terminal. The command terminal receives the following status updates from your radio:

Powering up or down the radio Automatic response to Polling Response to Evacuation commands Pressing the PTT button to make voice transmission Sending an Emergency Alarm and Call Entering or Exiting a Trunking Talkgroup Entering Fireground Zone Channel

(Conventional) 1 Upon powering up, one of the following scenarios occurs:

If the Fireground Zone Channel is set as default, you hear the gurgle tone and the radio displays 99 English the home screen. You are in Fireground zone channel. Get a qualified technician for assistance. If your home channel is not Fireground Zone Channel, toggle or change the radio zone channel to Fireground Zone Channel. If you are entering Fireground Trunking Talkgroup, upon powering up, ensure that the Fireground Trunking Talkgroup is selected. The subscriber unit automatically appears on the Incident Commander's terminal. 2 Listen for a transmission. Adjust the Volume Control Knob if necessary. 3 Perform one of the following actions:

Press and hold the preprogrammed Volume Set button to hear the volume set tone. Adjust the Volume Control Knob if necessary. Release the Volume Set button. At the desired Fireground zone and channel, press the preprogrammed Monitor button and listen for activity. Adjust the Volume Control Knob if necessary. 100 If your radio is working in Fireground Zone Channel, proceed to next step. 4 Press and hold the PTT button to transmit. The LED lights up solid red while transmitting. Talk into the microphone clearly if needed. 5 Release the PTT button to receive. You hear a Transmit End Tone. Sending Evacuation Tone This feature enables the evacuation tone to be heard on the transmitting radio and on any radio that is able to receive the tone instruction. Press and hold the PTT button and then short press the Top (Orange) button. Once the tone begins to sound, if the orange button is released the tone continues to alarm on all radios within the talkgroup, until the PTT button is released. NOTICE:

Radio does not transmit evacuation tone if the radio is in secure mode. Send Feedback Responding to Evacuation Indicator The Incident Commander can trigger one of sixteen Tactical Alerts from the Command Terminal. These alerts can target individuals or groups of users within the Fireground Communication System. The ergonomic (visual and audible) response for the Tactical Alerts can be customized. Your radio sounds the audible response at the profile maximum alert tone volume level. The display shows the configurable programmed alert text and intelligent lighting. Perform one of the following actions:

Press the radio Top Side button. Press the RSM Side Button 1 if the radio is connected to RSM. Press the PTT button. PTT button must be configured in CPS to enable this function. The radio cancels the indications, a tone sounds and the radio sends an acknowledgment to the command terminal. English NOTICE:

Move the Volume Control Knob to adjust the volume of the audible alert from full volume. Automatic Registration Service

(ARS) This feature provides an automated data application registration for the radio. When you turn on the radio, the device automatically registers with the server. Data applications within the fixed network can determine the presence of a device on the system and send data to the device. The ARS for the radio consists of two modes:

ARS Server Mode (default mode) ARS Non-Server Mode NOTICE:

The default ARS mode can be changed by a qualified radio technician using the radios programming software. Send Feedback 101 English Selecting or Changing the ARS Mode The following methods are options on how to select or change the ARS Mode. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions. In ARS Non-Server Mode, the display shows the zone and ARS non-server channel. If the channel or mode selected is unprogrammed, the display shows Unprogrammed. Repeat this step. Selecting or Changing the ARS mode using the 16-

Position Select knob:

a. Once the zone you want is displayed, turn the preprogrammed 16-Position Select knob to the desired mode. Selecting or Changing the ARS mode using the radio menu:

a. b. Press the Menu Select button directly below to Chan. or Chan. The display shows the current channel name. c. or to the required channel or mode. One of the following scenarios occur:

In ARS Server Mode, the display shows the zone and ARS server channel. d. Press Sel to confirm the displayed channel. User Login Feature This feature allows you as the user to be associated with the radio. With this association, every data application

(Example: Text Messaging Service) takes on a friendly username. You can still send text messages without logging in as a user. The user login feature only enables the recipient of your message to identify you as the sender by assigning a username to your message. NOTICE:

A predefined username that is set more than the maximum allowed characters is an invalid name. 102 Send Feedback Logging In as a User 1 Perform one of the following actions:

Press the preprogrammed User Login button. to User and press the Menu Select or button directly below User. The display shows the User Login screen. 2 Perform one of the following actions:

or to [ID Entry] and press the Menu Select button directly below Edit to enter ID. A blinking cursor appears on the screen. Use the keypad to type or edit a user name. Press the Menu Select button directly below Ok to submit. to scroll through the list of predefined or user names. Press the Menu Select button directly below Sel to select the predefined user name. Press and hold or to scroll through the list of predefined user names at a fast scroll rate. English Press the Menu Select button directly below Sel to select the predefined user name. If the ID is invalid, the display shows momentary Invalid ID. 3 Enter your Personal Identification Number (PIN) number. 4 Press the Menu Select button directly below Logn. One of the following scenarios occurs:

In ARS Server Mode, the display shows the User Login Indicator icon, the ID, and In progress, with Cncl. In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and Logged in, with Logt and Pscd. In non-ARS enabled mode, the display shows Offline, with Logt and Pscd. One of the following scenarios occurs:

If the user name is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The display also shows momentary Login failed. Send Feedback 103 English If the PIN is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The display also shows momentary Login failed. Wait for the logged in confirmation screen. If the login process is successful, the display shows the successful user login indicator (IP indicator) icon and Logged in, with Logt and Pscd. NOTICE:

To cancel the login process and return to the initial user login screen, press the Back button. Logging Out When you have logged in or you are using Offline mode, you can log out. NOTICE:

Private data refers to all messages in the text messaging Inbox, Draft, and Sent folder. The next user is able to access the Inbox, Draft, and Sent messages if private data is not deleted. 1 Press the Menu Select button directly below Logt. One of the following scenarios will occur:

104 The display shows Clear private data?. Proceed to the next step. If the Delete Messages On Session End feature is enabled, the radio clears the private data and returns to User Login screen. 2 Perform one of the following actions:

Select Yes to clear all your private data. The display shows momentary Private data cleared. Select No to keep your private data. Text Messaging Service (TMS) This features allows you to quickly send and receive messages and run database queries directly from your radios. The maximum length of characters for a text message is 200. The types of text messages available:

A new text message (free form message). A predefined message (quick text message). An edited quick text message. Send Feedback English Inbox A query (ASTRO 25 Advanced Messaging Solution). The main menu consists of the following options:

Compose Drafts Sent NOTICE:

See Status Icons on page 47 for more information on the TMS icons and TMS Menu Options on page 52 for more information on each menu option. Accessing the Messaging Features 1 Perform one of the following actions:

Press the preprogrammed TMS Feature button to access the TMS feature screen. Press and hold the preprogrammed TMS Feature button to access the Inbox. Follow the procedure described next to access this feature using the radio menu. 3 Press the Menu Select button directly below TMS to access the TMS feature screen. 4 or to scroll through the main menu options. NOTICE:

The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Press the Menu Select button directly below Back at any time to return to the previous screen. Composing and Sending a New Text Message During the uppercase and lowercase mode, multi-tapping the keys only scrolls through the letters. For example, A-

>B->C, a->b->c. During the numeric mode, except for keypad only enters the numeric digits. Subsequent presses

, pressing the 2 or to TMS. Send Feedback 105 English of the same key inserts the same digit to the text message

(no multi-tap). 7 or to Send Message and press the Menu Select button directly below Sel. 1 or to TMS. 8 Perform one of the following actions:

2 Press the Menu Select button directly below TMS to access the TMS feature screen. 3 Perform one of the following actions:

or to Compose and press the Menu Select button directly below Sel. or to scroll through the address list and select the required address. or to [Other Recpnt] and press the Menu Select button below Edit. When a blinking cursor appears in the Enter Address screen, use the keypad to type the address entry. Press the Menu Select button directly below Exit to return to the Home screen. 4 or to Text Message and press the Menu Select button directly below Sel to compose a new message. A blinking cursor appears on the Compose screen. 5 Use the keypad to type or edit your message. 6 Press the Menu Select button directly below Optn once the message is composed. 9 Press the Menu Select button directly below Send or press the PTT button to send the message. The display shows the Send Message screen and Sending msg. If the message is sent, you hear a tone and the display shows Msg sent. If the message is not sent, you hear a low tone, the display shows Send failed and returns to the main TMS screen. 106 Send Feedback NOTICE:

You can append a priority status and/or a request reply to your message. See Priority Status and Request Reply of a New Text Message on page 108 for more information. You can also select the Save to Drafts option to save your message in the Drafts folder to send it at a later time. See Accessing the Drafts Folder on page 113 for more information. Sending a Quick Text Message Quick Text messages are messages that are predefined and usually consist of messages that are used most frequently. Each Quick Text message or Query has a maximum length of 50 characters. You can select the required text from the Quick Text or Query. 4 5 1 Perform one of the following actions:

To access this feature using the preprogrammed button, press the preprogrammed Quick Text button and proceed to step 4. Send Feedback English To access this feature using the menu, proceed to the next step. 2 or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen. 3 Perform one of the following actions:

or to Compose and press the Menu Select button directly below Sel. Press the Menu Select button directly below Exit to return to the Home screen. or to Quick Text and press the Menu Select button directly below Sel for a predefined message. or to scroll through the list of messages and press the Menu Select button directly below Sel to select the required message. The message appears on the Compose screen, with a blinking cursor at the end of it. Use the keypad to edit the message, if required. 107 English 6 Press the Menu Select button directly below Optn. 7 or to Send Message and press the Menu Select button directly below Sel. 8 Perform one of the following actions:

or to scroll through the address list and select the required address. or to [Other Recpnt] and press the Menu Select button below Edit. When a blinking cursor appears on the Enter Address screen. Use the keypad to type the address entry. 9 Press the Menu Select button directly below Send or press the PTT button to send the message. The display shows the Send Message screen and Sending msg. If the message is sent, you hear a tone and the display shows Msg sent. If the message is not sent, you hear a low tone, the display shows Send failed and returns to the main TMS screen. NOTICE:

You can append a priority status and/or a request reply to your message. See Priority Status and Request Reply of a New Text Message on page 108 for more information. Priority Status and Request Reply of a New Text Message Before sending your message, you can append a priority status and/or a request reply to your message. Appending a Priority Status to a Text Message Ensure that an outgoing message is composed to allow you to perform this procedure. See Composing and Sending a New Text Message on page 105 for more information. 108 Send Feedback NOTICE:

The Priority Status icon on a message does not imply that the message gets higher priority over the other messages when it is being transmitted. It is just an indication that can be embedded into a message to let the receiver know that the message is important. 1 Press the Menu Select button directly below Optn. 2 or to Mark Important and press the Menu Select button directly below Sel to indicate the message is important. The priority status icon appears beside the normal message icon on the label bar. Removing a Priority Status from a Text Message Ensure there is an outgoing message composed to allow you to perform this procedure. See Composing and Sending a New Text Message on page 105 for more information. 1 Press the Menu Select button directly below Optn. Send Feedback English 2 or to Mark as Normal and press the Menu Select button directly below Sel to remove the priority status from the message. The display shows the normal message icon on the label bar. Appending a Request Reply to a Text Message Ensure that an outgoing message is composed to allow you to perform this procedure. See Composing and Sending a New Text Message on page 105 for more information 1 Press the Menu Select button directly below Optn. 2 or to Req Reply and press the Menu Select button directly below Sel to request for a reply. The request reply icon appears beside the normal message icon on the label bar. 109 English Removing a Request Reply from a Text Message Ensure that an outgoing message is composed to allow you to perform this procedure. See Composing and Sending a New Text Message on page 105 for more information. 2 3 or to Mark Important and press the Menu Select button directly below Sel to indicate the message is important. or to Req Reply and press the Menu Select button directly below Sel to request for a reply. 1 Press the Menu Select button directly below Optn. The priority status and request reply icons appear beside the normal message icon on the label bar. 2 or to No Req Reply and press the Menu Select button directly below Sel to remove the priority status from the message. The display shows the normal message icon on the label bar. Appending a Priority Status and a Reply Request to a Text Message Ensure that an outgoing message is composed to allow you to perform this procedure. See Composing and Sending a New Text Message on page 105 for more information. 1 Press the Menu Select button directly below Optn. 110 Removing a Priority Status and a Reply Request from a Text Message Ensure that a outgoing message is composed to allow you to perform this procedure. See Composing and Sending a New Text Message on page 105 for more information. 1 Press the Menu Select button directly below Optn. 2 or to Mark Important and press the Menu Select button directly below Sel to remove the priority status icon. Send Feedback 3 or to No Req Reply and press the Menu Select button directly below Sel to remove the reply status icon. The display shows the normal message icon on the label bar. Receiving a Text Message NOTICE:

When you receive a message that is flagged with the Request Reply icon, you must manually respond to the sender that you have received the message. The system will not automatically send a notification to acknowledge that the message was received. Do one of the following to receive a text message. You can use the options interchangeably depending on your preference and the programmed functions. Receiving a text message using the Data Feature button or the TMS Feature button:

When you receive a message, press and hold the preprogrammed Data Feature button or the TMS Feature button to access the Inbox. Receiving a text message using the radio menu:

Send Feedback English When the new message icon appears and the display shows momentary New msg, press the Menu Select button directly below TMS to access the Inbox. The display shows a list of aliases or IDs, with the sender of the latest received message on top. Viewing a Text Message from the Inbox The Inbox can hold up to 30 messages. NOTICE:

or to read the message if the content fills more than one screen. 1 Perform one of the following actions:

Press the preprogrammed TMS Feature button to access the TMS feature screen. Inbox and press the Menu Select button below Sel. or to Press and hold the preprogrammed TMS Feature button to access the Inbox. or to TMS and press the Menu Select button directly below TMS to access the TMS feature 111 English screen. Select button below Sel. or to Inbox and press the Menu The display shows a list of aliases or IDs, with the sender of the latest received message on top. Replying to a Received Text Message NOTICE:

The original date and time stamp, address, and message content is automatically appended to the reply message. or to the required aliases or ID and press the Menu Select button below Sel to view the message. While on the view message screen, press the Menu Select button directly below Optn or Del or select the Back button to access the option. Select Optn to configure the message settings. Select Del to delete the message. Select Back to return to the previous screen. NOTICE:

The icon at the top right corner of the screen indicates the status of the message. See Text Messaging Service (TMS) Indicators on page 50 for more information. 2 112 1 or to the required aliases or ID and press the Menu Select button below Sel to view the message. 2 Press the Menu Select button directly below Rply to reply to a message. 3 Perform one of the following actions:

or to Text Message and press the Menu Select button directly below Sel. or to Quick Text and press the Menu Select button directly below Sel for a predefined message. or to scroll through the list of predefined messages and press the Menu Select button directly below Sel to select the required message. One of the following scenarios occurs:

Send Feedback English A blinking cursor appears on the Compose screen. The predefined message appears on the Compose screen, with a blinking cursor at the end of it. Accessing the Drafts Folder This folder stores the messages that were saved previously. The Drafts folder can hold up to 10 messages. The oldest draft in the folder is deleted when the 11th message comes in. 4 Use the keypad to type or edit your message. 1 or to TMS. 5 Press the Menu Select button directly below Optn once you have completed the message. 2 Press the Menu Select button directly below TMS to access the TMS feature screen. 6 or to Send Message and press the Menu Select button directly below Sel to send the message. The display shows the Send Message screen and Sending msg. NOTICE:

Press the Back button at any time to return to the previous screen. You can append a priority status and/or a request reply to your message. See Priority Status and Request Reply of a New Text Message on page 108 for more information. 3 4 or to Drafts and press the Menu Select button below Sel. The display shows a list of drafts, with the latest text message drafted on top. or to the required text message and press the Menu Select button below Sel to view the message. Press the Menu Select button directly below Edit or Del or select the Back button to access the option. Select Edit to edit the message before sending it. Select Del to delete the message. Send Feedback 113 2 3 English Select Back to return to the previous screen. Sent Text Messages Once a message is sent to another radio, it is saved in the Sent folder. The most recent sent text message is always added to the top of the Sent list. The Sent folder is capable of storing a maximum of 10 messages. The oldest message in the folder is deleted when the 11th message comes in. Viewing a Sent Text Message 1 Perform one of the following actions:

Press the preprogrammed TMS Feature button to access the TMS feature screen. or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen. or to Sent and press the Menu Select button below Sel. The display shows a list of aliases or IDs, with the recipient of latest sent message on top. or to the required aliases or ID and press the Menu Select button below Sel to view the message. While on the view message screen, press the Menu Select button directly below Optn, Del or select the Back button to access the options. Select Optn to configure the message settings. Select Del to delete the message. Select Back to return to the previous screen. NOTICE:

The icon at the top right corner of the screen indicates the status of the message. See Text Messaging Service (TMS) Indicators on page 50 for more information. 114 Send Feedback Sending a Sent Text Message 1 Press the Menu Select button directly below Optn while viewing the message. 2 or to Send Message and press the Menu Select button directly below Sel. 3 Perform one of the following actions:

or to scroll through the address list and select the required address. or to [Other Recpnt] and press the Menu Select button below Edit. When a blinking cursor appears in the Enter Address screen, use the keypad to type the address entry. 4 Press the Menu Select button below Send or the PTT button to send the message. The display shows the Send Message screen and Sending msg. English NOTICE:

Press the Menu Select button directly below Back at any time to return to the previous screen. You can append a priority status and/or a request reply to your message. See Priority Status and Request Reply of a New Text Message on page 108 for more information. Deleting a Text Message 1 From the Inbox, Draft, or Sent screen, scroll through the messages. or to 2 Press the Menu Select button directly below Del to delete the current message. Deleting All Text Messages 1 Perform one of the following actions:

Press the preprogrammed TMS Feature button to access the Messaging feature screen. Send Feedback 115 English or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen. 2 or to Inbox or Sent then press the Menu Select button below Clr to select all messages in the selected folder. The display shows Del all?. 3 Perform one of the following actions:

Press the Menu Select button directly below Yes to delete all the messages in the selected folder. Press the Menu Select button directly below No to return to the main TMS feature screen. ASTRO 25 Advanced Messaging Solution The ASTRO 25 Advanced Messaging Solution allows you to quickly send and receive messages and run database queries directly from your data-enabled Motorola Solutions two-way radios. Federal mandate requires Two-Factor Authentication when querying Federal and State databases. With this advance messaging solution you have the ability enable Two-Factor Authentication. With Query and Two-Factor Authentication, you can use a secure system log on to initiate and receive key information on people, vehicles, and properties when doing the regular security patrol. You can access to local or external databases such as the National Crime Information Center

(NCIC), for "Hot Hits" on priors and warrants. Query and Two-Factor Authentication has Criminal Justice Information Services (CJIS) security compliance for queries. With this Advanced Messaging Solution, ARS functionality splits between two protocols:

ARS for Device Registration New User Authentication for User Login TMS functionality splits between two protocols:

TMS for messaging New Service Advertisement for service availabilities The radio with Two-Factor capabilities are backward compatible with the existing device registration system and TMS servers. 116 Send Feedback System Setup for ASTRO Advanced Messaging Solution Your user name, unit ID and password all need to be provisioned in PremierOne. Your user account in PremierOne needs to be linked to an RSA account specifying a token to be used with the Two-Factor passcode. The radio caches the user name, unit ID and or Single Factor password in the codeplug, this allows the radio to automatically log in to use Single Factor authentication upon power up or mode change. The Two-Factor passcode is not stored in the codeplug. You can upgrade the Single Factor session to a Two- Factor session by entering the Two-Factor passcode only. After an interruption (for example mode change, DSR switch over, power loss), the radio is capable of restoring the active session in its current state as long as the session is active in the server. NOTICE:

Power down occurs when the user intentionally powers off the radio, power loss is when the battery dies or is removed from the unit. English Two-Factor Authentication Two-Factor Authentication is an extension of existing ARS and TMS operation. This feature allows you to authenticate yourself with a username, unit ID, password, and passcode. This feature allows the sender of a text message to address a specific user of the radio, so the message is delivered to the user, and not anyone else who may have been using the radio at the time. This feature supports query authentication requirements so the query service knows which user originated a query. You can still send text messages without logging in as a user. The user log in feature only enables the recipient of your message to identify you as the sender by assigning a username to your message. NOTICE:

A predefined username that is set more than the maximum allowed characters is an invalid name. Logging in using the Two-Factor Authentication 1 Perform one of the following actions:

Send Feedback 117 English Press the preprogrammed User Login button. to User, and press the Menu Select or button directly below User. The display shows the User Login screen. 2 Perform one of the following actions:

3 For radio enabled with Unit ID, perform one of the following actions:

or to [UnitID Entry] and press the Menu Select button directly below Edit. A blinking cursor appears. Use the keypad to type or edit a Unit ID. Press the Menu Select button directly below Ok to submit. or to [ID Entry] and press the Menu Select button directly below Edit. A blinking cursor appears. Use the keypad to type or edit a username. Press the Menu Select button directly below Ok to submit. or to scroll through the list of predefined usernames. Press the Menu Select button directly below Sel to select the predefined username. or Press and hold to scroll through the list of predefined usernames at a fast scroll rate. Press the Menu Select button directly below Sel to select the predefined username. or to scroll through the list of predefined Unit IDs. Press the Menu Select button directly below Sel to select the predefined Unit ID. Press and hold or to scroll through the list of predefined Unit IDs at a fast scroll rate. Press the Menu Select button directly below Sel to select the predefined Unit ID. If the selected predefined Unit ID has more than the maximum allowed characters, or an invalid character in it, the display shows momentary Invalid UnitID. 4 Enter your password when you see a blinking cursor. If the selected predefined username has more than the maximum allowed characters, or an invalid character in it, the display shows momentary Invalid ID. 118 Send Feedback 5 Press the Menu Select button directly below Logn or Ok. If only one-factor is enabled, the display shows 1F logged at the status. The login operation is complete. If login fails, the display shows momentary Login failed. The display returns to User Login screen. 6 For radio enabled with two-factor login, enter your passcode when you see a blinking cursor. 7 Press the Menu Select button directly below Logn. The display shows In progress. If the login fails, the display shows momentary 2F pscd failed. Press the Menu Select button directly below Pscd to re-enter passcode. If successful, the display shows User Login screen with 2F logged in status to indicate Two-

Factor Authentication complete. English Logging out of Two-Factor Authentication NOTICE:

Private data refers to all messages in the text messaging Inbox, Draft, and Sent folder. The next user is able to access the Inbox, Draft, and Sent messages if private data is not deleted. Radio that is successfully logged in to the secured system receives advertisement from the server that the access to the data for query is enabled. 1 Press the Menu Select button directly below Logt. One of the following scenarios occurs:

The display shows Clear private data?. If the Delete Messages On Session End feature is enabled, the display shows momentary Private data cleared. 2 Select Yes to clear all your private data or select No to keep your private data. If you select Yes, the display shows momentary Private data cleared. Send Feedback 119 English Sending a Query This feature is available for radio users who have successfully logged in with the Two-Factor Authentication. Query is a special form of Quick Text marked with a flag that is replied or dispatched in normal TMS message. The query template needs to be configured in the quick test list of the CPS. You can choose from the quick text list, including queries if present. You shall receive a service advertisement message to indicate the Query is available after you have successfully logged in the radio with a Two-Factor Authentication. NOTICE:

The query server must be selected as the destination so that it can receive the query message and respond the query with text message. The query server must be an entry in the data user list in the CPS. 1 Perform one of the following actions:

To access this feature using the preprogrammed button, press the preprogrammed TMS Query button and proceed to step 5. To access this feature using the menu, proceed to the next step. 120 2 or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen. 3 Perform one of the following actions:

or to Compose and press the Menu Select button directly below Sel. 4 5 Press the Menu Select button directly below Exit to return to the Home screen. or to Query and press the Menu Select button directly below Sel for a predefined message. or to scroll through the list of messages and press the Menu Select button directly below Sel to select the required message. The message appears on the Compose screen, with a blinking cursor at the end of it. 6 Use the keypad to edit the message, if required. 7 Press the Menu Select button directly below Optn. Send Feedback 8 or to Send Message and press the Menu Select button directly below Sel. 9 Perform one of the following actions:

or to scroll through the address list and highlight the required address. or to [Other Recpnt] and press the Menu Select button below Edit. A blinking cursor appears on the Enter Address screen. Use the keypad to type the address entry. 10 Press the Menu Select button below Send or the PTT button to send the message. The display shows the Send Message screen and Sending msg. If the message is sent, you hear a tone and the display shows Msg sent. If the message is not sent, you hear a low tone, the display shows Send failed and returns to the main TMS screen. English NOTICE:

The server responds to your query with the required report in text messages. You can append a priority status and/or a request reply to your message. See Priority Status and Request Reply of a New Text Message on page 108 for more information. Receiving a Query The information requested is received in TMS format. When you receive a query, you hear a unique, high-pitched chirp and the display shows the message icon flagged with Priority. The display shows momentary New msg. To access the Inbox, press and hold the Data Feature button or the preprogrammed TMS Feature button or press the Menu Select button directly below TMS. The display shows a list of aliases or IDs, with the sender of the latest received message on top. Send Feedback 121 English Secure Operations Secure radio operation provides the highest commercially available level of voice security on both trunked and conventional channels. Unlike other forms of security, Motorola Solutions digital encryption provides signaling that makes it virtually impossible for others to decode any part of an encrypted message. Selecting Secure Transmissions Turn the preprogrammed Secure/Clear switch to the secure position. If the selected channel is preprogrammed for clear-only operation, when you press the PTT button, you hear an invalid mode tone and the display shows Clear TX only. The radio does not transmit until you set the Secure/Clear switch to the clear position. If the Ignore Secure/Clear Switch when Strapped programming option is enabled, the radio transmits without displaying any messages in the strapped mode of operation, regardless of 122 the Secure/Clear switch setting. This option must be preprogrammed by a qualified radio technician. The Secure/Clear switch only applies when the radio is transmitting. Selecting Clear Transmissions Turn the preprogrammed Secure/Clear switch to the clear position. If the selected channel is preprogrammed for secure-only operation, when you press the PTT button, you hear an invalid mode tone and the display shows Secure TX only. The radio does not transmit until you set the Secure/ Clear switch to the secure position. You can request to configure the radio to ignore the clear voice or insecured transmission when the radio is in secured transmission. Check with your agent for details. If the Ignore Secure/Clear Switch when Strapped programming option is enabled, the radio transmits without displaying any messages Send Feedback in the strapped mode of operation, regardless of the Secure/Clear switch setting. This option must be preprogrammed by a qualified radio technician. The Secure/Clear switch only applies when the radio is transmitting. Managing Encryption This chapter explains the encryption feature on your radio. Loading an Encryption Key NOTICE:

Refer to the key-variable loader (KVL) manual for equipment connections and setup. 1 Attach the KVL to your radio. The display shows Keyloading, and all other radio functions, except for power down, backlight, and volume, are locked out. English 2 Select the required keys and press the Menu Select button directly below LOAD on the KVL. This loads the encryption keys into your radio. When the key has been loaded successfully, one of the following scenarios occurs:

You hear the radio sounds a short tone for single-key radios. You hear the radio sounds an alternating tone for multikey radios. The KVL indicates that keyload is successful. Multikey Feature This feature allows the radio to be equipped with different encryption keys and supports the DES-OFB algorithm. There are two types of encryption keys:

Conventional Multikey The encryption keys are strapped on a one-per-channel basis, through CPS. In addition, you can have operator-

selectable keys, operator-selectable keysets, and operator-selectable key erasure. If talkgroups are enabled in conventional, then the encryption keys are strapped to the talkgroups. Send Feedback 123 English Trunked Multikey If the radio is used for both conventional and trunked applications, strap the encryption keys for trunking on a per-talkgroup or announcement-group basis. In addition, a different key can be strapped to other features, such as dynamic regrouping, failsoft, or emergency talkgroup. You can have operator-selectable key erasure. Selecting an Encryption Key 1 or to Key. 2 Press the Menu Select button directly below Key. The display shows the last user-selected and stored encryption key, and the available menu selections. 3 or to scroll through the encryption keys or use the keypad to enter the number of the desired key. 4 Perform one of the following actions:

Press the Menu Select button directly below Sel to save the newly selected key and return to the Home screen. Press

, the PTT button, or the Menu Select button directly below Exit. NOTICE:

When the selected key is erased, you hear a momentary keyfail tone and the display shows Key fail. When the selected key is not allowed, you hear a momentary illegal key tone and the display shows Illegal key. Selecting a Keyset This feature allows you to select one or more groups of several encryption keys from among the available keys stored in the radio. For example, you could have a group of three keys structured to one keyset, and another group of three different keys structured to another keyset; by changing keysets, you would automatically switch from one set of keys to the other. 124 Send Feedback Every channel to which one of the original keys was tied now has the equivalent new key instead. 1 2 or to KSet and press the Menu Select button directly below KSet. The display shows the last user-selected and stored keyset, and the available keyset menu selections. or to scroll through the keysets or use the keypad to enter the number of the desired keyset. 3 Press the Menu Select button directly below Sel to save the newly selected keyset. The radio exits keyset selection and returns to the Home screen.

, the PTT button, or the Exit menu NOTICE:

Press selection, or turn the 16-Position Select knob to exit this menu at any time without changing the keyset selection. English Erasing the Selected Encryption Keys This feature allows you to erase all or selected encryption keys. Do one of the following to erase the selected encryption keys. You can use the options interchangeably depending on your preference and the programmed functions. Erasing the selected encryption keys using the radio menu:

a. or to Eras and press the Menu Select button directly below Eras. The display shows the last user-selected and stored encryption key, and the available menu selections. b. or to the desired encryption key or use the keypad to enter the number of the desired key. c. Press the Menu Select button directly below Optn. The display shows the available key erase options. Send Feedback 125 English d. or to the required option and press the Menu Select button directly below Sel. e. Select Erase all keys? or Erase single key? by pressing the Menu Select button below Yes to erase the encryption key(s) in the radio. You can return to the previous screen by pressing the Menu Select button below No. Infinite UKEK Retention This feature enables Unique Key Encryption Key (UKEK) to be permanently stored in the radio even when all the encryption keys are erased. Without this UKEK key, the radio cannot be rekeyed over the air. NOTICE:

This feature must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information. Hear Clear NOTICE:

This feature must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information. There are two components of Hear Clear. Companding Reduces the channel noise, such as OTA transmission that is predominantly present in UHF2 and 900 MHz channel with the following features. Compressor Reduces the background noise flow and the speech signal at transmitting radio. Expander Expands the speech while the noise flow remains the same at receiving radio. Random FM Noise Canceller (Flutter Fighter) Reduces the unwanted effects of random FM noise pulses caused by channel fading under high Signal-to-

Noise (S/N) conditions such as in a moving transportation. The fading effects, heard as audio pops and clicks, are canceled without affecting the desired audio signal. The Random FM Noise Canceller operates only in receive mode. Security This chapter explains the radio security features. 126 Send Feedback Radio Lock This feature changes your radio to a more robust security system that protects the use of the secure encryption keys. If this feature is enabled in your radio by a qualified radio technician, when you turn the radio on, the display shows Radio locked. Unlocking Your Radio 1 Enter your numeric password. Secure-equipped radios 6 to 8 characters. Clear radios 0 to 8 characters. 2 Perform one of the following actions:

Press the Menu Select button directly below Sel to enter the code. Press the Menu Select button directly below Del to delete any unwanted characters. Press the Back button to exit the feature. If the password is correct, the radio unlocks. If the password is incorrect, the display show Incorrect password and the radio remains locked. English If you enter three incorrect passwords in a row, the display shows Deadlock. Turn the radio off and then on, and begin again at step 1. IMPORTANT:

For Secure Radios Only After a total of 17 consecutive incorrect passwords (turning the radio off and on does not reset this number), the radio erases all of its encryption keys and shows Deadlock. See a qualified radio technician. If you forget the password, enter ******** to erase all keys and revert the password in the radio back to the default password of 01234567. Changing Your Password 1 or to Pswd. 2 Press the Menu Select button directly below Pswd. The display shows Change Password screen. 3 or to Unlock Pswd. Send Feedback 127 English 4 Press the Menu Select button directly below Sel. 2 Press the Menu Select button directly below Pswd. 5 Enter the old password. The display shows Change Password screen. 6 Press the Menu Select button directly below Ok. 3 or to Tactical Inh Encode Pswd. 7 Enter the new password. 4 Press the Menu Select button directly below Sel. 8 Press the Menu Select button directly below Sel. 5 Enter the old password. 9 Re-enter the new password. 6 Press the Menu Select button directly below Ok. 10 Press the Menu Select button directly below Sel. 7 Enter the new password. The password is updated. If the two passwords do not match, repeat step 5 through step 10. NOTICE:

If you enter three incorrect old passwords, the radio exits the password feature. You cannot access this feature again until you turn the radio off and on. Changing Your Tactical Inhibit Password 8 Press the Menu Select button directly below Sel. 9 Re-enter the new password. 10 Press the Menu Select button directly below Sel. The password is updated. If the two passwords do not match, repeat step 5 through step 10. 1 or to Pswd. 128 Send Feedback NOTICE:

If you enter three incorrect passwords, the radio exits the password feature. You cannot access this feature again until you turn the radio off and on. Enabling or Disabling the Radio Lock Feature (Secure Radios Only) This feature allows you to enable or disable the radio lock feature. It is programmable by a qualified radio technician. 1 or to Logf. 2 Press the Menu Select button directly below Logf. One of the following results occur.:

The display shows Pswd enabled, indicating that the radio lock feature is enabled. The display shows Pswd disabled, indicating that the radio lock feature is disabled. English Global Positioning System/Global Navigation Satellite System The Global Navigation Satellite System (GNSS) in the radio uses information from the Global Positioning System (GPS) to determine the approximate geographical location of your radio. The geographical location is expressed as latitude and longitude or Military Grid Reference System (MGRS) format per request from customers. NOTICE:

This feature is addressed as GPS across the manual as the naming convention of the buttons and strings remain the same as the legacy feature of GPS. The availability and accuracy of this location information

(and the amount of time that it takes to calculate it) varies depending on the environment in which you are using the GPS feature. For example, GPS location fixes are difficult to obtain indoors, in covered locations, between high buildings, or in situations where you have not established a clear broad view of the sky. Send Feedback 129 English Once GPS is enabled, the radio displays the GPS icon on the screen. The dispatcher can always request the system to determine the real-time location coordinates of the radio. GPS Operation The GPS technology uses radio signals from earth orbiting satellites to establish location coordinates. Therefore, maximizing your view of unobstructed sky is essential for optimum performance. Where adequate signals from multiple satellites are not available (usually because you cannot establish a view of a wide area of the sky), the GPS feature of your radio will not work. Such situations include but are not limited to:

Underground locations Under any metal, or concrete roof, or structure Between tall buildings or under dense tree-cover In temperature extremes outside the operating limits of your radio Inside buildings, trains, or covered vehicles Even where location information can be calculated in such situations, it may take longer to do so, and your location estimate may not be as accurate. Therefore, in any 130 emergency situation, always report your location to your dispatcher. Keep in mind that the accuracy of the location information and the time it takes to obtain it varies depending upon circumstances, particularly the ability to receive signals from an adequate number of satellites. NOTICE:

Even where adequate signals from multiple satellites are available, your GPS feature only provides an approximate location, usually within 10 meters from your actual location, but sometimes farther away. The satellites used by the GPS feature are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense GPS user policy and the Federal Radio Navigation Plan. These changes may affect the performance of the GPS feature on your radio. GPS Performance Enhancement Sometimes, the GPS feature may be unable to complete a location calculation successfully. You then see a message indicating that your radio cannot connect to enough visible satellites. Send Feedback To maximize the ability of your radio to determine a fix, take note of the following guidelines:

For your initial fix, hold the radio in the face position. Stay in the open. The GPS feature works best where there is nothing between your radio and the open sky. Programmable Way-

points User-configurable location coordinates. The Outdoor Location Feature (Using GPS) This feature allows you to determine your current location using a location menu, as well as your current distance and bearing in relation to another location. Radio location may be requested and reported over-the-air. Your radio stores up to a maximum of 60 programmable location coordinates, also known as waypoints. When the memory is full, the next waypoints automatically replaces the oldest waypoints in the radio. The radio also stores four preprogrammed waypoints. These coordinates cannot be deleted. The following table shows the differences between programmable waypoints and preprogrammed waypoints. English Preprogrammed Way-

points Fixed location coordi-

nates:

Home Emergency Last Known Location Destination The Home and Destina-

tion coordinates are edita-

ble. Coordinates cannot be deleted. Only the alias is editable, not the coordinates. Coordinates can be de-

leted one at a time, or all at once. NOTICE:

The radio automatically exits the feature, if the feature inactivity timer is enabled. You hear the Menu Inactive Exit Tone upon feature exit. Send Feedback 131 English Military Grid Reference System (MGRS) Coordinates This feature can only be enabled through CPS configuration. When the MGRS coordinate is enabled, all location coordinates are displayed in MGRS format, including the editable locations in GPS. Accessing the Outdoor Location Feature NOTICE:

An ON radio menu may be present on the Location menu screen if it is preprogrammed by the dealer or system administrator. Press the preprogrammed GPS button to toggle the Outdoor Location feature to on or follow the following procedure to access this feature using the radio menu. 1 or to Loc. 2 Press the Menu Select button directly below Loc. The display shows Location off. 3 Perform one of the following actions:

To obtain a location fix, press the Menu Select button directly below On . Press the Menu Select button directly below Optn. Menu Select button directly below Sel. to Turn On GPS and press the or The front display shows the MGRS or latitude/

longitude location, time, and date of the last successful location fix. 4 To obtain a new location fix, press the Menu Select button directly below Rfsh. The top line temporarily displays Please wait while the new location is being determined. While the new location is being determined, the location signal can be a solid or blinking icon. Once the location coordinates are fixed, the display shows the current location along with the UTC (Zulu) time and date that the location fix was obtained. The location coordinates are updated automatically every 5 seconds while the location signal is present. 132 Send Feedback If the radio fails to get a location fix, the display shows No service and returns to the previous display. 5 To return to the Home screen, press

, the PTT button, the preprogrammed GPS button or the Back button. Saving a Waypoint Ensure that your radio shows the current location on the screen. 1 Press the Menu Select button directly below Optn. 2 Perform one of the following actions:

or to Save as Waypt and press the Menu Select button directly below Sel. or to Save as Home and press the Menu Select button directly below Sel and proceed to step 5. English or to Save as Dest. and press the Menu Select button directly below Sel and proceed to step 5. A blinking cursor appears on the screen. 3 Use the keypad to edit the auto-generated waypoint, if required, or press the Back button to return to the Location main screen. 4 Press the Menu Select button directly below Ok once you are done. One of the following scenarios occur:

The display shows Current loc saved as

<Waypoint name>. The display shows Current loc saved as

[Home]. The display shows Current loc saved as

[Destination]. 5 To return to the Home screen, press

, the PTT button, the preprogrammed GPS button or the Back button. Send Feedback 133 English Viewing a Saved Waypoint Ensure your radio shows the current location on the screen. 1 Press the Menu Select button directly below Optn. 2 or to Waypoints and press the Menu Select button directly below Sel. The display shows a list of waypoints. 3 Perform one of the following actions:

or or to scroll through the list. to select a waypoint to view the location information in full. 4 Press the Menu Select button directly below Optn. 5 To view the MGRS or latitude/longitude location, time and date of the selected waypoint, or View and press the Menu Select button directly below Sel. to 6 To return to the previous screen, press the Menu Select button directly below Back, or to return to the 134 Home screen, press preprogrammed GPS button.

, the PTT button, or the Editing the Alias of a Waypoint Ensure your radio shows the current location on the screen. 1 Press the Menu Select button directly below Optn. 2 3 4 or to Waypoints and press the Menu Select button directly below Sel. The display shows a list of waypoints. or to the required saved waypoint, and press the Menu Select button directly below Optn. or to Edit name and press the Menu Select button directly below Sel. A blinking cursor appears in the Edit Name screen. 5 Use the keypad to edit the alias. 6 Perform one of the following actions:

Send Feedback Press the Menu Select button directly below Ok once you are done. 2 Press the Back button to return to the Waypoints main screen. or to Waypoints and press the Menu Select button directly below Sel. The display shows a list of waypoints. English 7 The display shows <Waypoint name> Updated and the radio returns to the Waypoints main screen. 8 Perform one of the following actions:

Press the Menu Select button directly below Back to return to the previous screen. Press

, the PTT button, or the preprogrammed GPS button to return to the Home screen. Editing the Coordinates of a Waypoint NOTICE:

The user can only edit preprogrammed coordinates of Home and Destination. Ensure your radio shows the current location on the screen. 1 Press the Menu Select button directly below Optn. Send Feedback 3 Perform one of the following actions:

or to [Home] and press the Menu Select button directly below Optn. or to [Destination] and press the Menu Select button directly below Optn. 4 or to Edit location and press the Menu Select button directly below Sel. The first number blinks. 5 Utilize the following control buttons to select the number/coordinates if required, then press the Menu Select button directly below Edit to change the number/coordinates. Press to move to the previous number/

coordinates. 135 English to move to the next number/coordinates. Press A blinking cursor appears in the Edit Location screen. The display shows [Destination] Updated and the radio returns to the Waypoints main screen. 6 Utilize the following control buttons or menu to change the number/coordinates if required then press the Menu Select button directly below Ok once. Press Press Press the Menu Select button directly below Del to move one space to the left. to move one space to the right. to delete any unwanted characters. Deleting a Single Saved Waypoint Ensure your radio shows the current location on the screen. 1 Press the Menu Select button directly below Optn. 2 or to Waypoints and press the Menu Select button directly below Sel. The display shows a list of waypoints. Press the Back button to return to the previous screen 3 Perform one of the following actions:

7 Press the Menu Select button directly below Ok once complete setting up the new Home or Destination. One of the following scenarios occurs:

The display shows [Home] Updated and the radio returns to the Waypoints main screen. 136 or to the required saved waypoint, and press the Menu Select button directly below Optn. Select button directly below Del. to Edit name and press the Menu or Press the Menu Select button directly below Del. 4 The display shows Delete <Waypoint name>

Confirm?. Send Feedback 5 Press the Menu Select button directly below Yes to delete the waypoint or press the Menu Select button directly below No to return to the Waypoints main screen. 4 or to Delete All and press the Menu Select button directly below Sel. The display shows Delete All saved waypnts Confirm?. English The display shows <Waypoint name>deleted . Deleting All Saved Waypoints Ensure your radio shows the current location on the screen. NOTICE:

You cannot delete any of the preprogrammed waypoints. 1 Press the Menu Select button directly below Optn. or to Waypoints and press the Menu Select button directly below Sel. The display shows a list of waypoints. 2 3 5 Press the Menu Select button directly below Yes to delete all waypoints or press the Menu Select button directly below No to return to the Waypoints main screen. The display shows All saved waypnts deleted. Measuring the Distance and Bearing from a Saved Waypoint Ensure your radio shows the current location on the screen. 1 Press the Menu Select button directly below Optn. or to the required saved waypoint, and press the Menu Select button directly below Optn. 2 or to Dist frm here and press the Menu Select button directly below Sel. The display shows a list of waypoints. Send Feedback 137 English 3 or to the required waypoint and press the Menu Select button directly below Sel. The display shows the distance and bearing from the current to the selected coordinates. Location Feature in Emergency Mode When the Emergency feature is activated by pressing the emergency button, the radio exits the Location menu and returns to the Home (default) screen so that you can see which channel the emergency signal is going out on. However, you may re-enter the Location menu while still in emergency mode, provided that Silent Emergency has not been activated. If you have turned Location off using the ON/OFF menu key, it automatically turns back on when Emergency is activated. If there is a solid location signal during Emergency, the current location and the location information received is saved as Emergency and Last Known Location waypoints, respectively. Geofence (ASTRO 25 Trunking System) Geofence is a virtual perimeter based on the GPS to define a geographical area on earth. Check with your dealer or qualified technician to programme the geofence coordinates and actions. When the radio enters the predefined Geofence area, your radio receives the Dynamic Regroup command from the system and immediately connects to a Dynamic Regroup talkgroup. The radio display shows the new selected Dynamic Regrouped talkgroup with green intelligent light for your attention. On top of that, additional features are Voice Announcement of the new channel, and also direct content display of a text message to indicate that you are currently at Geofence area. Check with your nearest qualified technician on the requirements for these enhancements to work in Geofence. Any new text messages received at Geofence shall have its content displayed immediately on the radio display. NOTICE:

If the radio is set up in DVRS, only mobile radio is supported for this feature. 138 Send Feedback English Entering the Geofence Area The Voice Announcement and TMS display in this feature are optional. They must be configured to enable you to hear and see these indicators. When the radio enters a Geofence area, the radio immediately sends a message ACK back to the system. The radio searches the current zone for the channel with same talkgroup assigned as the Dynamic Talkgroup and also with same system ID of current trunk system. Once matched, the radio display shows the first matched and connected channel alias. If there is no channel with matching Talkgroup ID and trunk system ID, the radio display shows the channel alias of

<DYNAMIC talkgroup>. Once the radio is connected, you hear a dynamic regroup tone, the radio display shows <DYNAMIC channel> with temporary green color intelligent backlight and you hear a Voice Announcement. NOTICE:

When the radio loses the GPS signal, the GPS icon blinks and the radio sounds two high-pitched tones repetitively to indicate that the GPS has failed to operate. The radio display shows the red intelligent light. If the first matched channel is not configured with Voice Announcement, no Voice Announcement is played. The system sends a message to your radio. The radio display shows a direct text message content without any user operation. This message indicates you are currently present in a Geofence area. This TMS remains open on the display until user presses exit/home to exit this screen. NOTICE:

If there is another incoming text message before you exit the previous message, the message screen is refreshed to show the latest message. Send Feedback 139 Entering Mission Critical Geofence When the radio enters the predefined Geofence area, the radio displays <Geofence Alias> with intelligent backlight and the user hears a Voice Announcement. Zone and channel alias of the Geofence area is displayed. The user can choose either to proceed with zone and channel change or cancel the change. The radio then connects to the designated talkgroup. The radio displays the talkgroup alias and dynamic regroup tone sounds. The transmit power level changes and the radio shows a direct text message content without any user operation. English The following procedure guides you to exit the text message received. Press the Menu Select button below Exit or return to Home screen. to The other operations are the same as normal dynamic regroup command. When the radio exits the Geofence area, your radio reverts to original channel or newly assigned talkgroup. The radio display shows the new channel together with Voice Announcement to indicate the changes. Voice Announcement of the new channel only works if that channel is configured with Voice Announcement. Mission Critical Geofence This feature allows the radio to use the GPS receiver to determine radio location at frequent intervals. This feature also allows the radio to evaluate if the radio is within the Geofence area in real time. Check with your dealer or qualified technician to programme the geofence coordinates and actions. 140 Send Feedback NOTICE:

Depending on how your radio is programmed, you may or may not be alerted by Voice Announcement

(VA), TMS display, Intelligent Backlight, and the Transmit Power Level. The user will be alerted only if these indicators are configured in the radio. The VA can be programmed to alert continuously or momentarily. If Site Selectable Alert (SSA) is enabled, the radio mutes any alert that is received when entering the Geofence area and unmutes when exiting. Exiting Mission Critical Geofence When the radio exits the Geofence area, the radio reverts to the original transmit power level, intelligent lighting, channel or newly assigned talkgroup. Voice announcement is cancelled or the user hears a pre-programmed VA tone. The radio displays the new channel and a message is received to indicate the changes. Trunking System Controls This chapters explains the trunking system control features in your radio. English Operating in Failsoft System The failsoft system ensures continuous radio communication during a trunked system failure. If a trunking system fails completely, the radio goes into failsoft operation and automatically switches to its failsoft channel. During failsoft operation, your radio transmits and receives in conventional operation on a predetermined frequency. You hear a medium-pitched tone and the display shows Failsoft. When the trunking system returns to normal operation, your radio automatically leaves failsoft operation and returns to trunked operation. To continue in Failsoft and to communicate with other talkgroups, refer to the following procedure. 1 Rotate the Mode Knob to change to a different repeater frequency. 2 Press the PTT button to talk, and release the button to listen. Send Feedback 141 English Out-of-Range Radio When your radio goes out of the range of the system, it can no longer lock onto a control channel. You hear a low-pitched tone and/or the display shows the currently selected zone/channel combination and Out of range. Your radio remains in this out-of-range condition until it locks onto a control channel, it locks onto a failsoft channel, or it is turned off. Site Trunking Feature If the zone controller loses communication with any site, that site reverts to site trunking. The display shows the currently selected zone/channel combination and Site trunking. NOTICE:

When this occurs, you can communicate only with other radios within your trunking site. Locking and Unlocking a Site This feature allows your radio to lock onto a specific site and not roam among wide-area talkgroup sites. This feature should be used with caution, since it inhibits roaming to another site in a wide-area system. You can toggle the lock state between locked and unlocked by pressing the preprogrammed Site Lock/Unlock button. Follow the procedure to lock and unlock a site using the radio menu. 1 or to Site. 2 Press the Menu Select button directly below Site. 3 Perform one of the following actions:

To lock the site, press the Menu Select button directly below Lock. The display shows Site locked. To unlock the site, press the Menu Select button directly below Unlk. The display shows Site unlocked. The radio saves the new site lock state and returns to the Home screen. 142 Send Feedback Site Display and Search Button The Site Display and Site Search button allows you to view the name of the current site or force your radio to change to a new one. Viewing the Current Site Perform one of the following actions:

Press the preprogrammed Site Displ/Srch button. or to RSSI and press the Menu Select button directly below RSSI. The display shows momentarily the name of the current site and its corresponding received RSSI. Changing the Current Site Perform one of the following actions:

Press and hold down the preprogrammed Site Displ/Srch button. English Press and hold down the Menu Select button directly below RSSI. You hear a tone and the display shows momentary Scanning site. When the radio finds a new site, it returns to the Home screen. Bluetooth This feature allows your radio to extend its functionality by connecting to external proprietary Motorola Solutions accessories. Your radio must be preprogrammed to allow you to use this feature. The default setting for Bluetooth-enabled radio is Bluetooth on. See Turning Off the Bluetooth on page 144 to turn off the Bluetooth. Currently your radio supports the following Bluetooth devices or profiles. Headset (HSP) Dial Up Networking (DUN) Personal Area Networking (PAN) Send Feedback 143 English Serial Port (SPP) General Attribute Profile (GATT) Turning On Bluetooth Do one of the following to turn on the Bluetooth. You can use the options interchangeably depending on your preference and the programmed functions. a. Turning on the Bluetooth using the radio menu BT:

to BT. To access the Bluetooth feature screen, press the Menu Select button directly below BT. or b. or to Status and press the Menu Select button directly below On. The display shows Status On, and If Bluetooth fails to launch, the display shows Bluetooth on failed. appears. c. To return to the Home screen, press the Menu Select button directly below Exit. Turning on the Bluetooth using the preprogrammed button:

144 a. Press the preprogrammed button to turn on the Bluetooth. You hear a short, medium-pitched tone. The display shows momentary Bluetooth on, and appears. If Bluetooth fails to launch, the display shows Bluetooth on failed. Turning Off the Bluetooth Do one of the following to turn off the Bluetooth. You can use the options interchangeably depending on your preference and the programmed functions. a. Turning off the Bluetooth using the radio menu BT:

to BT. To access the Bluetooth feature screen, press the Menu Select button directly below BT. or b. or to Status and press the Menu Select button directly below Off. The display shows Status Off, and disappears. Send Feedback c. To return to the Home screen, press the Menu Select button directly below Exit. Turning off the Bluetooth using the preprogrammed button:

a. Press the preprogrammed button to turn off the Bluetooth. You hear a short, medium-pitched tone. Re-Pair Timer The bluetooth pairing type of the radio configuration defines the duration the radio and the accessory retain the pairing information. Infinite For all Bluetooth devices: When the radio and/or device are turned off after pairing, keys are not lost. When the radio and the device are turned on again, they can resume the Bluetooth connection without user intervention. English Re-Pair Tim-

er Options Infinite (For all Bluetooth devices) Re-Pair Timer Scenarios When the radio is powered off, the accessory attempts to re-establish the Bluetooth Connection for a pe-

riod of time depending upon the Drop Timer value. If the device fails to reconnect within the period, the accessory then powers off. Bluetooth Drop Timer This feature explains the Bluetooth Drop Timer setting and functions. Re-Pair Timer Options Infinite (For all Bluetooth de-

vices) Description This Timer only applies to the acces-

sory. The programmable timer choices are: 015 minutes, 2 hours, 4 hours, or 8 hours. This timer is a

"stay alive" timer where the accesso-

ry remains on without the device re-

connecting before powering off. The Send Feedback 145 English Re-Pair Timer Options Description radio remains on until the user pow-

ers off the radio. The radio and ac-

cessory remains paired indefinitely. Once the device re-connect, the tim-

er is reset. The radio could not control the Drop Timer of Personal Area Networking (PAN), Dial-Up Networking (DUN), Commercial Off- The-Shelf (COTS), and data services. It depends on the specifications of these external devices. Check with your dealer or system administrator for more information about these timers. To establish the Bluetooth Connection, see Standard Pairing Feature on page 146. Radio Indications of Lost Bluetooth Connection when the device has a Bluetooth The radio shows connection. Below are the radio indications when the connection is interrupted. starts blinking for up to 10 seconds. You hear a The decremental-pitched tone. The display shows <Device Type> alternating with disconnected. If the Bluetooth device successfully re-connects before the Bluetooth 10 second Re-Connection Timer expires, the display shows momentary <Device Type> connected, and stops blinking, or if the Bluetooth device fails to re-

connect within 10 seconds, the blinking is replaced by a persistent

. Standard Pairing Feature NOTICE:

Bluetooth tones, Bluetooth menu, and preprogrammed buttons must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information. Once a COTS headset is paired to your radio, it is always connected. Therefore the battery life of the accessory is aligned with the Talk time power consumption and not the Standby time consumption. 146 Send Feedback The Bluetooth Standard Pairing feature enables your Bluetooth enabled radio to search for other Bluetooth enabled and discoverable devices. Once a device is discovered, you can initiate your radio to send a pairing request to pair with the device. This feature also enables your Bluetooth enabled radio to be visible to other Bluetooth enabled devices and receive request to pair from other devices. The Standard Pairing feature supports pairing Authentication Personal Pairing Number or PIN which ensure your radio recognizes the correct device to pair. The PIN must be exchanged with the radio or the device before the pairing completes. Your radio prompts for the Authentication PIN when needed. Refer to your devices manual for details about the Bluetooth Authentication PIN of your device if needed. Searching and Pairing the Bluetooth Device Ensure the Bluetooth on your device is turned on and is set to Discoverable in order to enable your radio to detect your device in Bluetooth. English Bluetooth Search in Bluetooth Standard Pairing method is used to scan for other Bluetooth devices nearby. It is set to turn off by default. 1 Perform one of the following actions:

Press the preprogrammed Bluetooth Search button. or to BT. Press the Menu Select button or directly below BT to access the Bluetooth feature screen. to Search Devices and press the Menu Select button directly below On. If successful, the display shows BT Searching followed by the names of Bluetooth devices found, if any. When the search timer expires, Available Dev screen shows a list of Bluetooth devices found. To stop the search before the search timer expires, press the preprogrammed Bluetooth Search button or the Menu Select button below Stop. If the feature fails to initiate, the radio sounds a short, low-pitched tone. The screen shows BT Search failed. Press the Menu Select button below Back to return to Bluetooth feature screen, or press Send Feedback 147 English or the Menu Select button below Exit to return to Home screen. b. 2 or to the device name and press the Menu Select button directly below Sel to connect to the device. The radio starts pairing to the device. Turning On Bluetooth Visibility Turning Bluetooth visibility on enables other Bluetooth devices to search for your radio. The visibility of the Bluetooth is set to turn off by default. Do one of the following to turn on Bluetooth visibility. You can use the options interchangeably depending on your preference and the programmed functions. Turn on Bluetooth visibility using the radio menu BT:

or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen. a. 148 or to Visibility and press the Menu Select button directly below On. The status changes to Visible to all. Visibility mode is enabled. When the timer expires, the status changes to Visibility failed. Repeat the procedure to turn on Bluetooth visibility. Turn on Bluetooth visibility using the preprogrammed button. a. Press the preprogrammed button to enable the Bluetooth visibility feature. You hear a short, medium-pitched tone. The display shows momentary Visible to all. Visibility mode is enabled. When the timer expires, the display shows momentary Visibility failed. Repeat the procedure to turn on Bluetooth visibility. NOTICE:

Press the preprogrammed button to toggle the Bluetooth visibility on or off. Send Feedback Receiving Pairing Request from other Devices When your radio receives a pairing request from other device, the display shows <Device Friendly Name>pair request. Press the Menu Select button below Ok to accept or Cncl to refuse pairing request. Turning Off Bluetooth Visibility Ensure that Bluetooth Visibility is turned on. The following methods are options on how to turn off Bluetooth visibility. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions. Turn off Bluetooth visibility using the radio menu BT:

a. or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen. English b. or to Visibility and press the Menu Select button directly below Off. The display shows Visibility Off. When the timer expires, the status changes to Visibility off failed. Repeat this step to turn off Bluetooth visibility. c. To return to the Home screen, press the Menu Select button directly below Exit. To disable the Bluetooth visibility, press the preprogrammed button. You hear a short, medium-pitched tone. The display shows momentary Visibility Off. Visibility mode is disabled. When the timer expires, the status changes to Visibility off failed. Repeat this step to turn off Bluetooth visibility. PIN Authentication in Pairing For the security of your radio, Bluetooth Pairing PIN feature is designed to enable your radio to verify the correct device Send Feedback 149 English to pair before initiating the pairing. Authentic PIN is used for the verification. NOTICE:

The pairing PIN authentication method is only applicable for Bluetooth version 2.1 and above. Pairing the Authentication PIN when Receiving a Pairing Request 1 When the radio display shows <Device Friendly Name> pair request, perform one of the following actions:

To accept, press the Menu Select button below Ok. To reject, press the Menu Select button below Cncl. Your radio only supports HSP, DUN, PAN, and SPP Bluetooth profiles. When the pairing timer expires, the display shows

<Device Friendly Name> pair canceled and return to Home screen. If you choose to accept the pairing process, the display shows Compare PIN: XXXXXX. If you choose to reject the pairing process, the display shows Cancel pairing in progress... followed by <Device Friendly Name> pair canceled and return to Home screen. 2 Perform one of the following actions when the display shows Compare PIN: XXXXXX.:

Press the Menu Select button below Ok if the PIN is correct. Press the Menu Select button below Cncl to reject if the PIN number is incorrect. The display shows Cancel pairing in progress... followed by

<Device Friendly Name> pair canceled and return to Home screen. When the PIN authentication timer expires, the display shows <Device Friendly Name>pair canceled and return to Home screen. If successful, the display shows Pairing in progress...., <Device Friendly Name> paired followed by <Device Friendly Name>connected. If unsuccessful, one of the following scenarios will occur:

150 Send Feedback The display shows <Device Friendly Name>

pair failed (if the pairing timer expires). The display shows <Device Friendly Name>

connect failed (if the connecting timer expires). If the PIN is correct but the profiles are not supported, the display shows BT profiles not supported. The display returns to Home screen. Pairing the Authentication PIN with the Generated Numeric PIN Follow the procedure inSearching and Pairing the Bluetooth Device on page 147 to search for available Bluetooth devices. Start pairing with the Authentication PIN by following the steps described next. 1 or to the required device. Press the Menu Select button directly below Sel to initiate pairing. Your radio only supports HSP, DUN, PAN, and SPP Bluetooth profiles. If successful, the display shows Pairing in progress... followed by a randomly generated numeric PIN, Compare PIN: XXXXXX. Send Feedback English If unsuccessful, the display shows BT profiles not supported. The display returns to Available Dev screen. 2 Press Ok to continue pairing the radio and the device. The pairing process can be canceled by pressing the Menu Select button below Cncl. If successful, the display shows Pairing in progress,<Device Friendly Name> paired, Connecting in progress... followed by <Device Friendly Name>connected. The display returns to the Bluetooth feature screen. If unsuccessful, one of the following scenarios will occur:

The display shows <Device Friendly Name>

pair failed (if the PIN numbers are different).

<Device Friendly Name> connect failed (if the connection fails). The display returns to Available Dev screen. 151 English Pairing the Authentication PIN by Manually Keying in the Same PIN Follow the procedure in Searching and Pairing the Bluetooth Device on page 147 to search for available Bluetooth devices. Start pairing with the Authentication PIN by following the steps described next. 1 or to the required device. Press the Menu Select button directly below Sel to initiate pairing. Your radio only supports HSP, DUN, PAN and SPP Bluetooth profiles. If successful, the display shows Pairing in progress... followed by a request for PIN number. A blinking cursor appears below the Enter PIN:. If unsuccessful, the display shows BT profiles not supported. The display returns to Available Dev screen. 3 Press Ok to continue pairing the radio and the device. Enter the same PIN number on the device. The pairing process can be canceled by pressing the Menu Select button below Cncl. If successful, the display shows Pairing in progress,<Device Friendly Name> paired, Connecting in progress... followed by <Device Friendly Name>connected. The display returns to the Bluetooth feature screen. If unsuccessful, one of the following scenarios will occur:

The display shows <Device Friendly Name>

PIN auth fail (if the PIN numbers are different).

<Device Friendly Name> connect failed (if the connection fails). The display returns to Available Dev screen. 2 Use the keypad to enter the PIN. Press one space to the left. Press the right. Press the Menu Select button directly below Del to delete. to move to move one space to 152 Send Feedback Turning On the Bluetooth Audio Do one of the following to turn on the Bluetooth audio. You can use the options interchangeably depending on your preference and the programmed functions. Turning on the Bluetooth audio using the radio menu BT:

a. b. or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen. or to Bluetooth spkr and press the Menu Select button directly below On. The display shows On. c. To return to the Home screen, press the Menu Select button directly below Exit. Turning on the Bluetooth audio using the preprogrammed button:

a. To route the audio routing from the radio to the headset, short press the preprogrammed button. You hear a short, medium-pitched tone. The display shows Headset on. English BT audio routing can be configured in CPS to route the audio to RSM or radio's internal speaker. The audio routes to the radio's speaker if RSM is not connected. Check with your dealer or system administrator for more information on the programming of this feature. NOTICE:

For BT PTT press, the active microphone can be configured in CPS to transmit from either the RSM, the radio microphone, or the BT headset. If the configured device is not available, audio transmission reverts to BT headset. Turning Off the Bluetooth Audio Do one of the following to turn off the Bluetooth Audio. You can use the options interchangeably depending on your preference and the programmed functions. Turning off the Bluetooth audio using the radio menu BT:

a. or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen. Send Feedback 153 English b. or to Bluetooth spkr and press the Menu Select button directly below Off. The display shows Off. c. To return to the Home screen, press the Menu Select button directly below Exit. Turning off the Bluetooth audio using the preprogrammed button:

a. To route the audio routing from the headset to the radio, press the preprogrammed button. You hear a short, medium-pitched tone. The display shows Speaker on. Adjusting the Volume of the Radio from Bluetooth Audio Device Ensure that the Bluetooth audio device is connected to the radio. Your radio can only control the volume of OCW Bluetooth enabled audio device. If the radio is paired with other Bluetooth enabled audio device, its volume is independent from the APX radio. In this case, the volume is only adjustable on the device. Adjust volume up/down on the Bluetooth audio device. The radio display shows Volume XX, and you hear a short, medium-pitched tone. Viewing and Clearing the Bluetooth Device Information 1 2 or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen. or to Devices. Once the display highlights the Devices, the display shows XX connected alternates with XX paired. 3 Press the Menu Select button directly below Sel. 4 If there are devices being paired or connected, along the list of <Device Friendly Name> to or see the status of each device. 154 Send Feedback If there are no active Bluetooth devices being paired or connected, the display shows No devices. 5 Perform one of the following actions:

To clear the device from the list, or to the required device, press the Menu Select button directly below Clr. To exit from this function, press the Menu Select button directly below Back to return to the previous screen without deleting the device name. If Clr is selected, the display shows <Device Friendly Name> clear?. 6 Press the Menu Select button directly below Yes or No to proceed delete the device or to exit this function and return to previous screen. If the device is deleted successfully, the display shows

<Device Friendly Name> cleared to indicate clearing is successful. If the device is not deleted successfully, you hear the radio sounds a short, low-pitched tone. The display shows

<Device Friendly Name> clear failed. The display returns to previous screen. Send Feedback English NOTICE:

If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys on all previously paired devices as well. (Please see your Accessories manual for further details.) Clearing All Bluetooth Devices Information Do one of the following to clear all Bluetooth devices information. You can use the options interchangeably depending on your preference and the programmed functions. Clearing all Bluetooth devices information using the preprogrammed Bluetooth On/Off button:

a. Long press the preprogrammed Bluetooth On/Off button. You hear a short, medium-pitched tone. The display shows Please wait to indicate clearing is in progress. If successful, the display shows All BT devices cleared. 155 English If unsuccessful, the radio sounds a short, low-

pitched tone. The display shows Clear all BT devices failed. The display returns to Bluetooth feature screen. Clearing all Bluetooth devices information using the radio menu Clr:

a. or to Devices and press the Menu Select button directly below Clr. You hear a short, medium-pitched tone. The display shows Clear all BT devices?. b. Press the Menu Select button directly below Yes to proceed. The display shows Please wait to indicate clearing is in progress. If successful, the display shows All BT devices cleared. If unsuccessful, you hear the radio sounds a short, low-pitched tone. The display shows Clear all BT devices failed. The display returns to Bluetooth feature screen. 156 NOTICE:

If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys on all previously paired devices as well. (Please see your accessories manual for further details.) Editing the Bluetooth Friendly Name Your radio must be preprogrammed to allow you to use this feature. 1 2 or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature screen. or to Friendly name and press the Menu Select button directly below Edit. A blinking cursor appears in the Friendly Name screen. 3 Use the keypad to edit the text. 4 Perform one of the following actions:

Press the Menu Select button directly below Ok to save the new Friendly Name and return to the Bluetooth feature screen. Send Feedback English Press the Back button to return to the Bluetooth feature screen. Voice Announcement This feature enables the radio to audibly indicate the current feature mode, zone or channel the user has just assigned. This audio indicator can be customized per customer requirements. This is typically useful when the user is having difficulty reading the content shown on the display. Each voice announcement is within a limit of three seconds maximum. The sum duration of all different voice announcements in a radio shall be no more than 1000 seconds. NOTICE:

This feature must be preprogrammed by a qualified radio technician. Check with your agent if Voice Announcement is available for the feature you need. The two options of priority for the Voice Announcement available are:

High Enables the voice of the feature to announce even when the radio is receiving calls. Send Feedback Low Disables the voice of the feature from announcing when the radio is receiving calls. You hear a voice announcement when the features below are preprogrammed in the radio. The radio powers up. The radio announces the current zone and channel it is transmitting. Press the preprogrammed voice announcement button

(which specifically programmed to playback the current zone and channel). The radio announces the current zone and channel it is transmitting. NOTICE:

Pressing this preprogrammed playback button enables the voice feature to announce in High priority. All the three programmable buttons at the side of the radio support this feature. Change to a new zone. The radio announces the current zone and channel it is transmitting. Change to a new channel remaining within the current zone. The radio announces the current channel. Press either the Menu Select button or preprogrammed button of the radio to launch or terminate Scan, PL Disabled, Talkaround/Direct, or Transmit Inhibit. The 157 English radio announces the corresponding feature activation or deactivation. Sending SSA Notification to Single Site Site Selectable Alerts (ASTRO 25) A Site Selectable Alert (SSA) is an Intelligent Lighting indicator together with audio alert sent to radios at a site or a few sites to notify the users when there is a special situation that they need to be aware of. Only authorized radios are enabled to send SSA. Upon the activation of a SSA, the receiving radios display the alert alias and generate the periodic alert tone. NOTICE:

Alert alias, alert tone, and alert period can be preprogrammed. Alert period is the duration for the radio to repeat the alert tone. An interval of 5 seconds might impact the battery life of the radio. Check with your dealer or system administrator for more details. When mixing SSA with received voice audio, the SSA alert is reduced in volume to ensure that the voice message is still heard clearly. Therefore, it is important that the SSA audio files are created with clear loud audio to ensure they can still be heard clearly when played at reduced levels. 1 or to SSA. 2 Press the Menu Select button directly below SSA. The display shows the Site Alert screen. 3 4 5 or to Start Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen. or to the desired Site Alias. Press the Menu Select button directly below Sel. The display shows the Select Alert screen. or to select the desired Alert Alias and press the Menu Select button directly below Send. The display shows Sending req. If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req failed. If the request is successful, the display shows Req successful. 158 Send Feedback English If the site is not available, the display shows <Site Alias> not available. If the site does not exist, the display shows <Site Alias> does not exist. 6 To return to the Home screen, press the Menu Select button directly below Exit. If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically. The display shows the <Alert Alias> with the intelligent lighting at Home screen. Sending SSA Notification to Single Site by Manual Entry 3 4 or to Start Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen. or to [SiteID Entry] to send alert through the manual entry. Press the Menu Select button directly below Edit. The display shows the Enter SiteID screen. 5 Key in the desired Site ID and press the Menu Select button directly below Ok. If a correct Site ID is entered, the display shows the Select Alert screen. If a wrong Site ID is entered, the display shows Invalid ID and prompts to enter the Site ID again. 1 or to SSA. 2 Press the Menu Select button directly below SSA. The display shows the Site Alert screen. 6 or to select the desired Alert Alias and press the Menu Select button directly below Send. The display shows Sending req. If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req failed. Send Feedback 159 3 4 5 English If the request is successful, the display shows Req successful. If the site is not available, the display shows <Site ID> not available. If the site does not exist, the display shows <Site ID>does not exist. 7 To return to the Home screen, press the Menu Select button directly below Exit. If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically. The display shows the <Alert Alias> with the intelligent lighting at Home screen. Sending SSA Notification to All Sites 1 or to SSA. 2 Press the Menu Select button directly below SSA. The display shows the Site Alert screen. or to Start Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen. or to [All Sites] and press the Menu Select button directly below Sel. The display shows the Select Alert screen. or to select the desired <Alert Alias> and press the Menu Select button directly below Send. The display shows Sending req. If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req failed. If the request is successful, the display shows Req successful. If one or more sites are not available, the display shows Not all sites available. Repeat step 3. 160 Send Feedback 6 To return to the Home screen, press the Menu Select button directly below Exit. If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically. The display shows the <Alert Alias> with the intelligent lighting at Home screen. 4 5 Sending SSA Notification to All Available Sites 1 or to SSA. 2 Press the Menu Select button directly below SSA. The display shows the Site Alert screen. 3 or to Start Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen. English or to [All Avail] and press the Menu Select button directly below Sel. The display shows the Select Alert screen. or to select the desired Alert Alias and press the Menu Select button directly below Send. The display shows Sending req. If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req failed. If the request is successful, the display shows Req successful. 6 To return to the Home screen, press the Menu Select button directly below Exit. If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically. The display shows the <Alert Alias> with the intelligent lighting at Home screen. Send Feedback 161 English Stopping SSA Notification of a Single Site If the site does not exist, the display shows <Site Alias>does not exist. 1 or to SSA. 2 Press the Menu Select button directly below SSA. The display shows the Site Alert screen. or to Stop Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen. or to select the desired Site Alias and press the Menu Select button directly below Send. The display shows Sending req. If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req failed. If the request is successful, the display shows Req successful. If the site is not available, the display shows <Site Alias> not available. 3 4 162 5 To return to the Home screen, press the Menu Select button directly below Exit. The SSA Alert for the designated site stops. Stopping SSA Notification of a Single Site by Manual Entry 1 or to SSA. 2 Press the Menu Select button directly below SSA. The display shows the Site Alert screen. 3 or to Stop Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen. Send Feedback 4 or to [SiteID Entry] and press the Menu Select button directly below Edit. The display shows the Enter SiteID screen. 5 Key in the required Site ID and press the Menu Select button directly below Send. One of the following scenarios occur:

If a wrong Site ID is entered, the display shows Invalid ID and prompts to enter the Site ID again. If a correct Site ID is entered, the display shows Sending req. If the request is successful, the display shows Req successful. If the single site is not available, the display shows <Site ID> not available. If the single site does not exist, the display shows

<Site ID> does not exist. 6 To return to the Home screen, press the Menu Select button directly below Exit. The SSA Alert for the designated site stops. Send Feedback English Stopping SSA Notification of All Sites 1 or to SSA. 2 Press the Menu Select button directly below SSA. The display shows the Site Alert screen. 3 4 or to Stop Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen. or to [All Sites] and press the Menu Select button directly below Send. The display shows Sending req. If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req failed. If the request is successful, the display shows Req successful. If one or more sites are not available, the display shows Not all sites available. Repeat step 3. 163 English 5 To return to the Home screen, press the Menu Select button directly below Exit. If the request is successful, the display shows Req successful. The SSA Alert for all sites stop. Stopping SSA Notification of All Available Sites 1 or to SSA. 2 Press the Menu Select button directly below SSA. The display shows the Site Alert screen. or to Stop Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen. or to [All Avail] and press the Menu Select button directly below Send. The display shows Sending req. If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req failed. 3 4 164 5 To return to the Home screen, press the Menu Select button directly below Exit. The SSA Alert for all available sites stop. Utilities This chapter explains the operations of the utility functions available in your radio. Viewing Recent Calls This feature allows you to view the recent incoming and outgoing call information of the following call types:

Call Alert Selective Call Private Call Phone Call (Outgoing Only) Emergency Call (Incoming Only) Send Feedback NOTICE:

The radio can also be preprogrammed to log only the radio IDs associated with incoming Dispatch Calls. Check with your dealer or system administrator for more information. Do one of the following to view recent calls. You can use the options interchangeably depending on your preference and the programmed functions. Viewing recent calls using the preprogrammed or Recent Calls button:

a. Press the preprogrammed Recent Calls button. b. c. To return to the Home screen, press the Menu or Select button directly below Exit, press the PTT button. to scroll through the list. Viewing recent calls using the radio menu:

or to Rcnt. a. b. Press the Menu Select button directly below Rcnt to access the Recent Calls feature screen. c. or to scroll through the list. English d. To return to the Home screen, press the Menu Select button directly below Exit, button. or the PTT The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Selecting the Power Level NOTICE:

This feature must be preprogrammed by a qualified radio technician. This feature enables you to reduce the transmit power level for specific case that requires a lower power level. You can select the power level at which your radio transmits. The radio always turns on to the default setting. These reduced transmit power level settings do not affect the receiving performance of your radio, nor diminish the overall quality of the audio and data functionality of the radio given the following conditions. Power level Low enables a shorter transmitting distance and to conserve power. Power level High enables a longer transmitting distance. Send Feedback 165 English Do one of the following to select the power level. You can use the options interchangeably depending on your preference and the programmed functions. Selecting the Power Level using the Transmit Power Level switch:

a. Use the preprogrammed Transmit Power Level switch to toggle the power level between low and high power. Selecting the Power Level using the radio menu:

or to Pwr. a. b. Press the Menu Select button directly below Pwr. The display shows Low power and the low power icon or the display shows High power and the high power icon. Selecting a Radio Profile This feature allows you to manually switch the visual and audio settings of the radio. The display, backlight, alert tones, and audio settings are defined according to the preprogrammed radio settings of each radio profile. Please refer to a qualified technician for more information. NOTICE:

The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit. Do one of the following to select a radio profile. You can use the options interchangeably depending on your preference and the programmed functions. Selecting a radio profile using the preprogrammed Profile button:

a. Press the preprogrammed Profile button. b. to scroll through the menu selections. c. Press the Menu Select button directly below Sel or to select the required radio profile, or press the Menu Select button directly below Exit to exit the screen without making any changes. The radio returns to the Home screen. The profile name on the Home screen indicates the current selected radio profile. Selecting a radio profile using the radio menu:

166 Send Feedback a. or to Prfl and press the Menu Select button directly below Prfl to access the Profiles feature screen. or b. to scroll through the menu selections. c. Press the Menu Select button directly below Sel to select the required radio profile, or press the Menu Select button directly below Exit to exit the screen without making any changes. The radio returns to the Home screen. The profile name on the Home screen indicates the current selected radio profile. Enabling and Disabling the Radio Alias This feature allows you to display or hide the radio alias

(name). Press the Menu Select button directly below MyID. The display shows momentary Radio ID off, and the radio alias disappears from the Home screen or the display shows momentary Radio ID on, and the radio alias appears on the Home screen. Send Feedback English Selecting the Audio Speaker Your radio must be preprogrammed to allow you to use this feature. This feature allows you to select the speaker route for the radio's audio from either the main or the secondary speaker using the radio profile settings. While both speakers function together with the secondary speaker enhancing intelligibility of the received audio during typical radio operation, each speaker has an independently-tuned frequency response and volume level operation. The secondary speaker also has a "whisper" mode with a modified volume taper for quieter modes of operation. NOTICE:

If an external speaker or microphone accessory is attached to the radio, neither internal speaker is operational as audio is routed to the accessory. Do one of the following to select the audio speaker. You can use the options interchangeably depending on your preference and the programmed functions. Select the audio speaker using the preprogrammed Profile button:

a. Press the preprogrammed Profile button. b. or to scroll through the menu selections. 167 English c. Press the Menu Select button directly below Sel to select the radio profile with the required speaker routing or press the Menu Select button directly below Exit to exit the screen without making any changes. The radio returns to the Home screen. The profile name on the Home screen indicates the current selected radio profile. Select the audio speaker using the radio menu Prfl:

or to Prfl. a. b. To access the Profiles feature screen, press the Menu Select button directly below Prfl. or c. to scroll through the menu selections. d. Press the Menu Select button directly below Sel to select the radio profile with the required speaker routing or press the Menu Select button directly below Exit to exit the screen without making any changes. The radio returns to the Home screen. The profile name on the Home screen indicates the current selected radio profile. Controlling the Display Backlight You can enable or disable the radios display backlight as needed, if poor light conditions make the display or keypad difficult to read. Depending on how your radio is preprogrammed, you can also maintain a minimum backlight level on the radio's front display. NOTICE:

The backlight setting also affects the Menu Select buttons, the Navigation button and the keypad backlighting accordingly. The backlight remains on for a preprogrammed time before it automatically turns off completely or returns to the minimum backlight level. Perform one of the following actions:

To toggle the backlight on or off, press the preprogrammed Light/Flip button. To turn the backlight on, press any key of the keypad, the Menu Select or Navigation button, or any programmable radio controls or buttons. 168 Send Feedback Locking and Unlocking the Keypad and Controls You can lock your radio keypad, programmable buttons, and knob or knobs to avoid inadvertent entry.Check with your dealer or qualified technician for best selection to suit your usage. 1 Toggle the preprogrammed Keypad/Control Lock button to on. The display shows Kypd/Ctrl Lock. 2 Toggle again to unlock the controls. Turning the Controls and Keypad Buttons Tones On or Off You can enable and disable the tones of Navigation buttons, controls and keypad if needed. Turning the tones on or off using the preprogrammed Mute button:

English a. To turn the tones off or on, press the preprogrammed Mute button. Turning the tones on or off using the radio menu:

or to Mute. a. b. Press the Menu Select button directly below Mute. The display shows momentary Tones off, indicating that the tones are disabled or the display shows momentary Tones on, and you hear a short tone indicating that the tones are enabled. Turning Voice Mute On or Off You can enable and disable voice transmission, if needed. Do one of the following to turn Voice Mute on or off. You can use the options interchangeably depending on your preference and the programmed functions. Turning Voice Mute off or on using the preprogrammed Voice Mute button:

a. To turn the feature off or on, press the preprogrammed Voice Mute button. Send Feedback 169 English Turning Voice Mute on or off using the radio menu:

or to VMut. a. b. Press the Menu Select button directly below VMut. The display momentarily shows Voice mute off, and you hear a short tone, indicating that the feature is disabled or the display shows momentary Voice mute on, and you hear a short tone, indicating that the feature is enabled. Using the Time-Out Timer This feature turns off the transmitter of your radio. You cannot transmit longer than the preset timer setting. If you attempt to do so, the radio automatically stops your transmission, and you hear a talk-prohibit tone. The timer is defaulted at 60 seconds, but it can be preprogrammed from 3 to 120 seconds, in 15-second intervals, or it can be disabled entirely for each radio mode, by a qualified radio technician. NOTICE:

You hear a brief, low-pitched, warning tone four seconds before the transmission times out. 1 Hold down the PTT button longer than the preprogrammed time. You hear a short, low-pitched warning tone, the transmission is cut-off, and the LED goes out until you release the PTT button. 2 Release the PTT button. The timer resets. 3 To re-transmit, press the PTT button. The time-out timer restarts and the LED lights up solid red. 170 Send Feedback English Result You hear any digital traf-

fic. You hear any digital traffic having the correct net-

work access code. You hear any digital traffic having the correct net-

work access code and correct talkgroup. Using Conventional Squelch Operation Features This feature filters out unwanted calls with low signal strength or channels that have a higher than normal background noise. Option Digital Carrier-Operated Squelch (COS) Normal Squelch Selective Switch Analog Options Tone Private Line (PL), Digital Private-Line (DPL), and carrier squelch can be available (preprogrammed) per channel. Mode Carrier squelch (C) PL or DPL Result You hear all traffic on a channel. The radio responds only to your messages. Digital Options One or more of the following options may be preprogrammed in your radio. Check with your dealer or system administrator for more information. Using the PL Defeat Feature This feature allows you to override any coded squelch

(DPL or PL) that might be preprogrammed to a channel. The radio also unmutes to any digital activity on a digital channel. Place the preprogrammed PL Defeat switch in the PL Defeat position. One of the following scenarios occurs:

You hear any activity on the channel. The radio is muted if no activity is present. Send Feedback 171 English NOTICE:

When this feature is active, the Carrier Squelch status indicator is displayed. Digital PTT ID Support This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving a transmission. This ID, consisting up to a maximum of eight characters, can be viewed by both the receiving radio and the dispatcher. The ID number of your radio is also automatically sent every time the PTT button is pressed. This is a per-channel feature. For digital voice transmissions, the ID of your radio is sent continuously during the voice message. Smart PTT Feature (Conventional Only) Smart PTT is a per-personality, programmable feature used in conventional radio systems to keep radio users from talking over other radio conversations. When smart PTT is enabled in your radio, you cannot transmit on an active channel. 172 If you try to transmit on an active smart-PTT channel, you hear an alert tone, and the transmission is inhibited. The LED lights up solid yellow to indicate that the channel is busy. The following table shows the variations of smart PTT:

Mode Transmit Inhibit on Busy Chan-

nel with Carrier Transmit Inhibit on Busy Chan-

nel with Wrong Squelch Code Quick-Key Over-

ride Description You cannot transmit if any traffic is detected on the channel. You cannot transmit on an active channel with a squelch code or (if secure-equipped) encryption key other than your own. If the PL code is the same as yours, the transmis-

sion is not prevented. Your radio must be preprogram-

med to allow you to use Quick-Key Override. This feature can work in conjunction with either of the two above variations. You can override the transmit-inhibit state by quick-

keying the radio. In other words, Send Feedback Mode Description two PTT button presses within the preprogrammed time limit. NOTICE:

Acknowledgement of any messages required from the radio is not transmitted if the Transmit Inhibition is enabled. English Enabling Transmit Inhibition Perform one of the following actions:

Switch the preprogrammed Transmit Inhibit switch to Transmit Inhibit enabled. or to TxIn. Press the Menu Select button below TxIn. Press the Transmit Inhibit programmable button. Transmit Inhibit This feature is available for APCO 25 trunking, Type II trunking and Conventional operations for all APX radios. When Transmit Inhibit feature is enabled, the radio stops all transmission including voice and data. The radio can receive messages but is not able to reply the acknowledgment request of the received message. User can physically control the transmission of the radio especially during operation in hazardous environments with this feature. An environment is considered hazardous when the power emitted by the radio power amplifier could initiate an explosion or other dangerous reactions. When the Transmit Inhibit feature is disabled, the radio functions according to its normal operations. The radio sounds alert tone when user enters or exits this feature and also when PTT is pressed. Send Feedback 173 English NOTICE:

If the user has disabled TX Inhibit using the menu and then moves the switch to the position where TX Inhibit is enabled, the new value overwrites the menu value. The display shows Tx inhibit on. You hear a sequence of short, low-high tones to indicate transmission is inhibited. Pressing PTT triggers the radio sounds a constant short, low-pitched tone (reject tone). NOTICE:

The status of the Transmit Inhibit does not change after the radio powers up. Disabling Transmit Inhibition Perform one of the following actions:

to TxIn. Press the Menu Select button or below TxIn. Press the Transmit Inhibit programmable button. 174 NOTICE:

If the user has disabled TX Inhibit using the softkey and then moves the switch to the position where TX Inhibit is enabled, the new value overwrites the menu value. The display shows Tx inhibit off. You hear a sequence of short, high-low tone (Transmit Inhibit Off tone) to indicate transmission is back to normal operation. IMPRES Battery Annunciator This feature displays the current capacity and charges cycles of your battery when an IMPRES Battery is powering your radio. This feature must be enabled in your radio to see the information. The information shown are:

Charge Percentage Percentage of current battery capacity. Remaining Capacity Remaining power of the battery in mAh. Estimated Charges Number of charges cycles the battery has gone through. Send Feedback English Accessing the Battery Info screen 1 or to Batt. 2 Press the Menu Select button directly below Batt. The display shows the details of the battery. 3 To return to the Home screen, press the Menu Select button directly below Exit. General Radio Information Your radio contains information on the following:

Radio Information Control Assignments Soft ID (If enabled) IP Display NOTICE:

The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You hear the Menu Inactive Exit Tone upon feature exit. Send Feedback Accessing the Radio Information This feature displays the following radio information:

Host Version Secure Version Model Number ESN Flash Code Tuning Version Option Board Type (optional) Option Board Bluetooth Address (optional) Expansion Board Type (optional) MFK Secondary Function DSP Version KG (Secure Algorithm) Serial Number Flash Size and Type RF Band(s) Processor Version Option Board Serial Number (optional) 175 English Option Board Software Version (optional) Language Pack ID and Version (only when the language of the display is set to non-English) NOTICE:

To return to the Home screen, press time. at any 1 Perform one of the following actions:

Press the preprogrammed Info button. to Info and press the Menu Select button or directly below Info. Press to return to the Home screen . Viewing the IP Information This feature displays the device name, IP address, and status of your radio. NOTICE:

The device name of your radio is preprogrammed. Check with your dealer or system administrator for more information. 1 Perform one of the following actions:

2 or to Radio Info and press the Menu Select button directly below Sel. The display shows the Information screen. 3 Perform one of the following actions:

2 or to scroll through the various information. To return to the previous screen, press the Menu Select button directly below Back. Press the preprogrammed Info button. to Info and press the Menu Select button or directly below Info. or to IP Info and press the Menu Select button directly below Sel. The display shows the IP Info screen. 3 Perform one of the following actions:

or to scroll through the various information. 176 Send Feedback English Press the Menu Select button directly below Back to return to the previous screen. or to scroll through the various information. Press the Menu Select button directly below Back to return to the previous screen. Press to return to the Home screen. Press to return to the Home screen. Viewing the Control Assignments This feature displays the programmable radio functions assigned to the controls of your radio for the currently selected channel. See Programmable Features on page 36 for more information on the various programmable features of your radio. 1 Perform one of the following actions:

Press the preprogrammed Info button. to Info and press the Menu Select button or directly below Info. 2 or to Control map and press the Menu Select button directly below Sel. The display shows the Control Map screen. 3 Perform one of the following actions:

Send Feedback 177 English 178 This page intentionally left blank. Helpful Tips This chapter explains the radio and battery care. English Radio Care CAUTION:

Your radio casting has a vent port that allows for pressure equalization in the radio. Never poke this vent with any objects, such as needles, tweezers, or screwdrivers.This could create leak paths into the radio and the radios submergibility will be lost. Send Feedback 179 A English The radio with antenna attached properly is designed to be submersible to a maximum depth of 2 meters (6.56 feet) and a maximum submersion time of 2 hours. Exceeding either maximum limit or use without antenna may result in damage to the radio. If the radio battery contact area has been submerged in water, dry and clean the radio battery contacts before attaching a battery to the radio. Otherwise, the water could short-circuit the radio. If the radio has been submerged in water, shake the radio well so that any water that may be trapped inside the speaker grille and microphone port can be removed. Otherwise, the water will decrease the audio quality of the radio. If water is observed on the vent port of radio casting, dry the vent port. Otherwise, the water will block the vent port and prevent pressure equalizing of the radio that could affect the radio overall performance. Cleaning Your Radio CAUTION:

Do not use solvents to clean your radio as most chemicals may permanently damage the radio housing and textures. Do not submerge the radio in the detergent solution. To clean the external surfaces of your radio, follow the procedure described next. 1 Combine one teaspoon of mild dishwashing detergent to one gallon of water (0.5% solution). 2 Apply the solution sparingly with a stiff, non-metallic, shortbristled brush, making sure excess detergent does not get entrapped near the connectors, controls or crevices. Dry the radio thoroughly with a soft, lint-

free cloth. 3 Clean battery contacts with a lint-free cloth to remove dirt or grease. Do not disassemble the radio. This could damage radio seals and result in leak paths into the radio. Any radio maintenance should be performed only by a qualified radio technician. 180 Send Feedback Proper Ways to Handle the Radio Do not pound, drop, or throw the radio unnecessarily. Never carry the radio by the antenna. Avoid subjecting the radio to an excess of liquids. Do not submerge the radio. Avoid subjecting the radio to corrosives, solvents or chemicals. Do not disassemble the radio. CAUTION:

Do not use the radio without an accessory connector or a dust cover in place as contamination can build up on the contacts. When charging the radio using a wall mounted charger, the radio must be turned off. Otherwise, the Emergency may be accidentally triggered. Radio Service and Repair Proper repair and maintenance procedures will assure efficient operation and long life for this product. A Motorola Solutions maintenance agreement will provide expert service to keep this and all other communication equipment in perfect operating condition. Send Feedback English A nationwide service organization is provided by Motorola Solutions to support maintenance services. Through its maintenance and installation program, Motorola Solutions makes available the finest service to those desiring reliable, continuous communications on a contract basis. For a contract service agreement, please contact your nearest Motorola Solutions service or sales representative, or an authorized Motorola Solutions dealer. Battery Care This chapter provides information on the battery charge status, battery recycling and disposal. Battery Charge Status Your radio can indicate the batterys charge status through:

You can also check the battery charge status using the menu entry. See IMPRES Battery Annunciator on page 174 for more information. the LED and sounds. the fuel gauge icon on the display. 181 English LED and Sounds When your battery is low:

the LED blinks red when the PTT button is pressed. you hear a low-battery chirp (short, high-pitched tone). Gauge Battery Charge 26% to 50% 3 11% to 25% 3 Fuel Gauge Icons A blinking fuel gauge icon ( ) is displayed only when the battery voltage drops to low level. In this case, replace the battery with a fully charged one. Gauge Battery Charge 76% to 100% full 3 51% to 75% 3 Table continued 10% or less (at 10%, the gauge begins blinking) Battery Recycling and Disposal In the U.S. and Canada, Motorola Solutions participates in the nationwide Call2Recycle program for battery collection and recycling. Many retailers and dealers participate in this program. For the location of the drop-off facility closest to you, access Call2Recycle's Internet web site at http://

www.call2recycle.org/ or call 1-800-8-BATTERY. This internet site and telephone number also provide other useful information concerning recycling options for consumers, businesses, and governmental agencies. 3 These are for IMPRES battery operation only. 182 Send Feedback Accessories The accessory link below is for APX radios. Not all accessories are FCC certified to operate with all APX models and/or bandsplits. Please refer to the specific APX radio price pages for a list of FCC certified accessories or contact your sales representative for accessory compatibility. http://www.motorolasolutions.com/APX English Send Feedback 183 English 184 This page intentionally left blank. Maritime Radio Use in the VHF Frequency Range Special Channel Assignments Emergency Channel If you are in imminent and grave danger at sea and require emergency assistance, use VHF Channel 16 to send a distress call to nearby vessels and the United States Coast Guard. Transmit the following information, in this order:

1 MAYDAY, MAYDAY, MAYDAY. 2 THIS IS _____________________, CALL SIGN __________. State the name of the vessel in distress 3 times, followed by the call sign or other identification of the vessel, stated 3 times. 3 Repeat MAYDAY and the name of the vessel. 4 WE ARE LOCATED AT _______________________. State the position of the vessel in distress, using any information that will help responders to locate you, e.g.:

latitude and longitude Send Feedback English bearing (state whether you are using true or magnetic north) distance to a well-known landmark vessel course, speed or destination 5 State the nature of the distress. 6 Specify what kind of assistance you need. 7 State the number of persons on board and the number needing medical attention, if any. 8 Mention any other information that would be helpful to responders, such as type of vessel, vessel length and/or tonnage, hull color, etc. 9 OVER. 10 Wait for a response. 11 If you do not receive an immediate response, remain by the radio and repeat the transmission at intervals until you receive a response. Be prepared to follow any instructions given to you. Non-Commercial Call Channel For non-commercial transmissions, such as fishing reports, rendezvous arrangements, repair scheduling, or berthing information, use VHF Channel 9. 185 Table 1: VHF Marine Channel List Channel Num-

Frequency (MHz) English Operating Frequency Requirements A radio designated for shipboard use must comply with Federal Communications Commission Rule Part 80 as follows:

on ships subject to Part II of Title III of the Communications Act, the radio must be capable of operating on the 156.800 MHz frequency. on ships subject to the Safety Convention, the radio must be capable of operating:

-

in the simplex mode on the ship station transmitting frequencies specified in the 156.025157.425 MHz frequency band, and in the semiduplex mode on the two frequency channels specified in the table below. NOTICE:

Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters. Additional information about operating requirements in the Maritime Services can be obtained from the full text of FCC Rule Part 80 and from the US Coast Guard.

-

186 ber 1 2

*

4 5 6 7 8 9 10 11 12 13**

14 Transmit 156.050 156.100 156.150 156.200 156.250 156.300 156.350 156.400 156.450 156.500 156.550 156.600 156.650 156.700 Receive 160.650 160.700 160.750 160.800 160.850 160.950 156.450 156.500 156.550 156.600 156.650 156.700 Table continued Send Feedback 15**

16 17**

18 19 20

*

22

*

24 25 26 27 28 60

*

62 156.750 156.800 156.850 156.900 156.950 157.000 157.050 157.100 157.150 157.200 157.250 157.300 157.350 157.400 156.025 156.075 156.125 156.750 156.800 156.850 161.500 161.550 161.600 161.650 161.700 161.750 161.800 161.850 161.900 161.950 162.000 160.625 160.675 160.725 Table continued 63

*

65 66 67**

68 69 71 72 73 74 75 76 77**

78 79 80 Send Feedback 156.175 156.225 156.275 156.325 156.375 156.425 156.475 156.575 156.625 156.675 156.725

***

***

156.875 156.925 156.975 157.025 English 160.775 160.825 160.875 160.925 156.375 156.425 156.475 156.575 156.675 156.725

***

***

161.525 161.575 161.625 Table continued 187 English

*

*

*

84 85 86 87 88 157.075 157.125 157.175 157.225 157.275 157.325 157.375 157.425 161.675 161.725 161.775 161.825 161.875 161.925 161.975 162.025 NOTICE:

* Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters.

** Low power (1 W) only.

*** Guard band. NOTICE:

A in the Receive column indicates that the channel is transmit only. Declaration of Compliance for the Use of Distress and Safety Frequencies The radio equipment does not employ a modulation other than the internationally adopted modulation for maritime use when it operates on the distress and safety frequencies specified in RSS-182 Section 7.3. Technical Parameters for Interfacing External Data Sources RS232 18 V USB 3.6 V SB9600 5 V 115 Kbps 12 Mbps 9.6 Kbps 5000 90 120 Input Volt-

age (Volts Peak-to-

peak) Max Data Rate Impe-

dance 188 Send Feedback Glossary This glossary is a list of specialized terms used in this manual. ACK Acknowledgment of communication. Active Channel A channel that has traffic on it. Analog Signal An RF signal that has a continuous nature rather than a pulsed or discrete nature. ARS Automatic Registration Service. ASTRO 25 Vertex Standard for wireless digital trunked communications. ASTRO Conventional Vertex Standard for wireless digital conventional communications. Autoscan A feature that allows the radio to automatically scan the members of a scan list. English Bluetooth Bluetooth is an open wireless technology standard for exchanging data over short distances from fixed and mobile devices with high levels of security. Bluetooth Pairing Bluetooth pairing occurs when two bluetooth devices exchanged a passkey to form a paired Bluetooth wireless connection. Call Alert Privately page an individual by sending an audible tone. Carrier Squelch Feature that responds to the presence of an RF carrier by opening or unmuting (turning on) a receivers audio circuit. A squelch circuit silences the radio when no signal is being received so that the user does not have to listen to noise. Central Controller A software-controlled, computer-driven device that receives and generates data for the trunked radios assigned to it. It monitors and directs the operations of the trunked repeaters. Send Feedback 189 English Channel A group of characteristics such as transmit/receive frequency pairs, radio parameters, and encryption encoding. Control Channel In a trunking system, one of the channels that is used to provide a continuous, two-way/data communications path between the central controller and all radios on the system. Conventional Typically refers to radio-to-radio communications, sometimes through a repeater (see Trunking). Conventional Scan List A scan list that includes only conventional channels. COTS Commercial Off-The-Shelf. Cursor A visual tracking marker (a blinking line) that indicates a location on the display. Deadlock Displayed by the radio after three failed attempts to unlock the radio. The radio must be powered off and on prior to another attempt. Digital Private Line (DPL) A type of coded squelch using data bursts. Similar to PL except a digital code is used instead of a tone. Digital Signal An RF signal that has a pulsed, or discrete, nature, rather than a continuous nature. Dispatcher An individual who has radio system management duties. DSP Digital Signal Processing. Dynamic Regrouping A feature that allows the dispatcher to temporarily reassign selected radios to a single special channel so they can communicate with each other. DSR Dynamic System Resilience. EID Encrypted Integrated Data. ESN Electrical Serial Number. 190 Send Feedback Failsoft A feature that allows communications to take place even though the central controller has failed. Each trunked repeater in the system transmits a data word informing every radio that the system has gone into failsoft. FCC Federal Communications Commission. FM Frequency Modulation. Hang Up Disconnect. Home screen The first display information after the radio completes its self test. IV&D Integrated Voice and Data. KVL Key-variable loader: A device for loading encryption keys into the radio. LCD Liquid crystal display. Send Feedback English MDC Motorola Data Communication. Menu Entry A software-activated feature shown at the bottom of the display selection of these features is controlled by the

, Monitor

, and, buttons. Check channel activity by pressing the Monitor button. If the channel is clear, you hear static. If the channel is in use, you hear conversation. It also serves as a way to check the volume level of the radio, since the radio opens the squelch when the monitor button is pressed. Multi-Function Knob It works as a power on/off button, provides primary and secondary functions like volume change and mode change. Multi-System Talkgroup Scan List A scan list that can include both talkgroups (trunked) and channels (conventional). Network Access Code Network Access Code (NAC) operates on digital channels to reduce voice channel interference between adjacent systems and sites. 191 English Non-Tactical/Revert The user talks on a preprogrammed emergency channel. The emergency alarm is sent out on this same channel. Page A one-way alert, with audio and/or display messages. Personality A set of unique features specific to a radio. PIN Personal Identification Number. PremierOne A software application which streamlines critical real time operations and simplifies system administration to deliver accurate, consistent and integrated information remotely to the requestors. Preprogrammed Refers to a software feature that has been activated by a qualified radio technician. Private (Conversation) Call A feature that lets you have a private conversation with another radio user in the talkgroup. Private Line (PL) A sub-audible tone that is transmitted such that only receivers decoding the tone receives it. 192 Programmable Refers to a radio control that can have a radio feature assigned to it. PTT Push-To-Talk. The PTT button engages the transmitter and puts the radio in transmit (send) operation when pressed. Radio Frequency (RF) The part of the general frequency spectrum between the audio and infrared light regions (about 10 kHz to 10,000,000 MHz). Repeater A conventional radio feature, where you talk through a receive/transmit facility that re-transmits received signals, in order to improve communications range and coverage. Selective Call A feature that allows you to call a selected individual, intended to provide privacy and to eliminate the annoyance of having to listen to conversations of no interest to you. Selective Switch Any digital P25 traffic having the correct Network Access Code and the correct talkgroup. Send Feedback Squelch Special electronic circuitry, added to the receiver of a radio, that reduces, or cuts off, unwanted signals before they are heard in the speaker. SSI Synchronous Serial Interface. Standby An operating condition whereby the radios speaker is muted but still continues to receive data. Status Calls Pre-defined text messages that allow the user to send a conditional message without talking. Tactical/ Non-Revert The user talks on the channel that was selected before the radio entered the emergency state. Talkaround Bypass a repeater and talk directly to another unit for easy local unit-to-unit communications. Talkgroup An organization or group of radio users who communicate with each other using the same communication path. TMS Text Messaging Service. Send Feedback English Trunking The automatic sharing of communications paths between a large number of users (see Conventional). Trunking Priority Monitor Scan List A scan list that includes talkgroups that are all from the same trunking system. USK Unique Shadow Key. UTC Coordinated Universal Time. The international time standard (formerly Greenwich Mean Time, or GMT). Zero hours UTC is midnight in Greenwich, England, which is located at 0 degrees longitude. Everything east of Greenwich (up to 180 degrees) is later in time;

everything west is earlier. There are 42 time authorities around the world that are constantly synchronizing with each other. Abbreviated as UTC (English backronym =

Universal Time, Coordinated), it is also known as Zulu

(Z) Time. Zone A grouping of channels. 193 English 194 This page intentionally left blank. Limited Warranty MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:

MOTOROLA SOLUTIONS, INC. (MOTOROLA) warrants the MOTOROLA SOLUTIONS manufactured Communication Products listed below (Product) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:

ASTRO APX 900 Porta-

ble Units Product Accessories One (1) Year One (1) Year For LACR region:

Send Feedback English ASTRO APX 900 Porta-

ble Units Product Accessories Three (3) Years One (1) Year MOTOROLA SOLUTIONS, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA SOLUTIONS. This express limited warranty is extended by MOTOROLA SOLUTIONS to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA SOLUTIONS. MOTOROLA SOLUTIONS assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA SOLUTIONS. Unless made in a separate agreement between MOTOROLA SOLUTIONS and the original end user purchaser, MOTOROLA SOLUTIONS does not warrant the installation, maintenance or service of the Product. 195 English MOTOROLA SOLUTIONS cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA SOLUTIONS which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA SOLUTIONS disclaims liability for range, coverage, or operation of the system as a whole under this warranty. MOTOROLA SOLUTIONS offers the following optional extended service contracts. SERVICE FROM THE START (SfS) COMPREHENSIVE Provides for extended hardware repair coverage INCLUDING CHEMICAL, LIQUID, FIRE, AND OTHER PHYSICAL DAMAGE. Comprehensive coverage is available in conjunction with MOTOROLA SOLUTIONSS standard Commercial Warranty and starts from the FIRST DAY the radio is put into use. Service performed under this plan consists of repair or replacement of the covered equipment as set forth in the terms and conditions. Repairs will be made only at the designated MOTOROLA SOLUTIONS repair depot. Local services are not included. MOTOROLA SOLUTIONS will pay the inbound shipping charges only with use of the MOTOROLA SOLUTIONS designated delivery service. MOTOROLA SOLUTIONS will 196 pay for outbound shipping via MOTOROLA SOLUTIONS'S normal shipping methods. SERVICE FROM THE START (SfS) LITE Provides extended hardware normal wear and tear repair coverage beginning AFTER MOTOROLA SOLUTIONSS standard Commercial Warranty period expires. Service performed under this plan consists of repair of the covered equipment as set forth in the terms and conditions. Repairs will be made only at the designated MOTOROLA SOLUTIONS repair depot. Local services are not included. MOTOROLA SOLUTIONS will pay for outbound shipping via MOTOROLA SOLUTIONS'S normal shipping methods. II. GENERAL PROVISIONS:

This warranty sets forth the full extent of MOTOROLA SOLUTIONS'S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLA SOLUTIONSs option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA SOLUTIONS BE LIABLE Send Feedback English FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA SOLUTIONS through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA SOLUTIONS at 1-800-927-2744 US/Canada. III. STATE LAW RIGHTS:

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE:

You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the V. WHAT THIS WARRANTY DOES NOT COVER:

1 Defects or damage resulting from use of the Product in other than its normal and customary manner. 2 Defects or damage from misuse, accident, water, or neglect. 3 Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. 4 Breakage or damage to antennas unless caused directly by defects in material workmanship. 5 A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-

Send Feedback 197 English MOTOROLA SOLUTIONS supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA SOLUTIONS's normal warranty inspection and testing of the Product to verify any warranty claim. 6 Product which has had the serial number removed or made illegible. 7 Rechargeable batteries if:

any of the seals on the battery enclosure of cells are broken or show evidence of tampering. the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. 8 Freight costs to the repair depot. 9 A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLA SOLUTIONSs published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA SOLUTIONS. 10 Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. 198 11 Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS:

MOTOROLA SOLUTIONS will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA SOLUTIONS will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:

1 that MOTOROLA SOLUTIONS will be notified promptly in writing by such purchaser of any notice of such claim, 2 that MOTOROLA SOLUTIONS will have sole control of the defense of such suit and all negotiations for its settlement or compromise, and 3 should the Product or parts become, or in MOTOROLA SOLUTIONSs opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA SOLUTIONS, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it Send Feedback becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA SOLUTIONS. MOTOROLA SOLUTIONS will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA SOLUTIONS, nor will MOTOROLA SOLUTIONS have any liability for the use of ancillary equipment or software not furnished by MOTOROLA SOLUTIONS which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA SOLUTIONS with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA SOLUTIONS certain exclusive rights for copyrighted MOTOROLA SOLUTIONS software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA SOLUTIONS software. MOTOROLA SOLUTIONS software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without Send Feedback English limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA SOLUTIONS software or exercise of rights in such MOTOROLA SOLUTIONS software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA SOLUTIONS patent rights or copyrights. VII. GOVERNING LAW:

This Warranty is governed by the laws of the State of Illinois, U.S.A. VIII. For Australia Only This warranty is given by Motorola Solutions Australia Pty Limited (ABN 16 004 742 312) of Tally Ho Business Park, 10 Wesley Court. Burwood East, Victoria. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 199 English Motorola Solutions Australias limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Motorola Solutions Australia at 1800 457 439. You may also visit our website: http://

www.motorolasolutions.com/XA-EN/Pages/Contact_Us for the most updated warranty terms. 200 Send Feedback

 

 

6881095C98_SafetyP.book Page 1 Wednesday, March 4, 2015 2:35 PM RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS ATTENTION!

Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 20072015 Motorola Solutions, Inc. All rights reserved. Printed in Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, U.S.A.

*NNTN7223H*

NNTN7223H

*6881095C98*

6881095C98-LA English 6881095C98_SafetyP.book Page 2 Wednesday, March 4, 2015 2:35 PM RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use NOTICE: This radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. English 2 6881095C98_SafetyP.book Page 3 Wednesday, March 4, 2015 2:35 PM Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/

http://responsibility.motorolasolutions.com/index.php/downloads/dow07-

rfexposureassessmentstand Federal Communication Commission (FCC) Regulations When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Motorola two-way radio has a RF Exposure Product Label. Also, your Motorola user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standards Your Motorola two-way radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk-50%

listen and is approved for occupational use only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. 3 English 6881095C98_SafetyP.book Page 4 Wednesday, March 4, 2015 2:35 PM NOTE: The approved batteries, supplied with this radio, are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby) even though this radio complies with FCC occupational exposure limits and may operate at duty factors of up to 50% talk. Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines:

United States Federal Communications Commission (FCC), Code of Federal Regulations; 47 CFR et seq. & FCC, OET Bulletin 65 Institute of Electrical and Electronic Engineers (IEEE) C95.1 International Commission on Non-Ionizing Radiation Protection (ICNIRP) Ministry of Health (Canada) Safety Code 6 & Industry Canada RSS-102 Australian Communications Authority Radiocommunications Standard et seq. ANATEL ANNEX to Resolution No. 303 et seq. RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures. DO NOT remove the RF Exposure Label from the device. User awareness instructions should accompany device when transferred to other users. English 4 6881095C98_SafetyP.book Page 5 Wednesday, March 4, 2015 2:35 PM Two-Way Radio Operation Transmit no more than the rated duty factor of 50% of the time. To transmit

(talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. The PTT button may reside on the radio itself or may be hosted on approved wired or wireless (for example, a Bluetooth enabled remote Push-to-Talk button) accessories. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). In front of the face. Hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips. Keeping the radio at a proper distance is important to ensure compliance. NOTE: RF exposures decrease with increasing distance from the antenna. Body Worn Operation. When worn on the body, always place the radio in a Motorola-approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of non-

Motorola-approved accessories may result in exposure levels, which exceed the occupational/controlled environment RF exposure limits. Use only Motorola-approved supplied or replacement antennas, batteries, and audio accessories. Use of non-Motorola-approved antennas, batteries, and wired or wireless accessories may exceed the applicable RF exposure guidelines (iEEE, ICNIRP or FCC). For a list of Motorola-approved accessories for your radio model, visit the following website: http://www.motorolasolutions.com/US-EN/

Business+Product+and+Services/Accessories/Two-Way+Radio+Accessories 5 English 6881095C98_SafetyP.book Page 6 Wednesday, March 4, 2015 2:35 PM Electromagnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers, Defibrillators or other Implanted Medical Devices Persons with pacemakers, Implantable cardioverter-defibrillators (ICDs) or other active implantable medical devices (AIMD) should:

Consult with their physicians regarding the potential risk of interference from radio frequency transmitters, such as portable radios (poorly shielded medical devices may be more susceptible to interference). Turn the radio OFF immediately if they have any reason to suspect that interference is taking place. Do not carry the radio in a chest pocket or near the implantation site, and carry or use the radio on the opposite side of their body from the implantable device to minimize the potential for interference. English 6 6881095C98_SafetyP.book Page 7 Wednesday, March 4, 2015 2:35 PM Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use of Communication Devices While Driving Always check the laws and regulations on the use of radios in the areas where you drive. Give full attention to driving and to the road. Use hands-free operation, if available. Pull off the road and park before making or answering a call, if driving conditions or regulations so require. 7 English 6881095C98_SafetyP.book Page 8 Wednesday, March 4, 2015 2:35 PM Acoustic Safety Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. To protect your hearing:

Use the lowest volume necessary to do your job. Turn up the volume only if you are in noisy surroundings. Turn down the volume before adding headset or earpiece. Limit the amount of time you use headsets or earpieces at high volume. When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear. Operational Warnings W A R N I N G For Vehicle With Air Bags:

Refer to vehicle manufacturer's manual prior to installation of electronic equipment to avoid interference with air bag wiring. DO NOT place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. English 8 6881095C98_SafetyP.book Page 9 Wednesday, March 4, 2015 2:35 PM Operational Warnings (Continued) W A R N I N G Potentially Explosive Atmospheres

(Explosive atmospheres refers to hazard classified locations that may contain hazardous gas, vapors, or dusts.) Turn off your radio prior to entering any area with a potentially explosive atmosphere unless it is a portable radio type especially qualified for use in such areas as Intrinsically Safe (for example, Factory Mutual, CSA, UL, ATEX, or IECEx). DO NOT remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted. Blasting Caps and Blasting Areas To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: "Turn off two-way radio." Obey all signs and instructions. 9 English 6881095C98_SafetyP.book Page 10 Wednesday, March 4, 2015 2:35 PM Operational Cautions C a u t i o n Antennas DO NOT use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Operational Warnings Batteries Dos and Donts Most battery issues arise from improper handling of batteries. Follow these general Dos and Donts to avoid injury and damage. DO'S Do exercise care in handling any charged battery, particularly when placed inside a pocket, purse, or container with metal objects. Do charge your battery using Motorola-approved battery charger. Charging your battery in a non-Motorola equipment may lead to reduced performance and battery damage. Do use your battery in accordance with its water and/or dust Ingress Protection (IP) rating. Refer to your user guide and product specifications sheet for more information on relevant operating environments. English 10 6881095C98_SafetyP.book Page 11 Wednesday, March 4, 2015 2:35 PM Operational Cautions (Continued) C a u t i o n Batteries Dos and Donts (Continued) DONTS Do not discard battery in a fire. Do not replace battery in any area labeled Hazardous Atmosphere. Any sparks created in a potentially explosive atmosphere can cause an explosion or fire. Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery. Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven. If the radio battery contact area has been submerged in water, dry and clean the battery contacts before attaching the battery. Do not allow conductive material such as jewelry, keys or beaded to touch exposed battery terminals as the conductive material may complete electrical circuit, or short circuit, and become hot. Hazardous Locations Radio Information The Hazardous Locations approval unit refers to a product that has been approved for use in Hazardous Locations by an approval agency (for example FM Approvals, CSA, UL, ATEX, or IECEx) and certifies that a particular product meets the Agency's applicable Hazardous Locations standards. A portable radio that has been approved for Hazardous Locations will have an Approval label attached to the radio to identify the unit as Approved for specified hazardous atmospheres. This label specifies the Hazardous Locations Class/Division/Group along with the part number of the battery that must be used with the approved radio. 11 English 6881095C98_SafetyP.book Page 12 Wednesday, March 4, 2015 2:35 PM Operational Cautions for Hazardous Locations Radio Equipment C a u t i o n DO NOT operate radio communications equipment in a hazardous atmosphere unless it is a type especially certified (for example, FM, UL, CSA, ATEX, or IECEx). The use of non-Approved unit could result in an unsafe condition. DO NOT operate a radio unit that has been approved for use in Hazardous Locations if it has been physically damaged (for example, cracked housing). This could result in an unsafe condition. DO NOT replace or charge batteries in a hazardous atmosphere. Contact sparking may occur while installing or removing batteries. DO NOT use the radio in Hazardous Locations other than the permitted classification it is rated to. Radios must ship from a Motorola manufacturing facility with the Hazardous Locations approved design and label (FM, UL, CSA, ATEX, IECEx). Radios will not be upgraded to this capability and labeled once they have been shipped to the field. A modification changes the units hardware from its Approved certified design configuration. Modifications can only be done by the original product manufacturer. Further warnings and instructions for the safe use of radios in Hazardous Locations can be found in the specific Hazardous Locations safety manual. English 12 6881095C98_SafetyP.book Page 1 Wednesday, March 4, 2015 2:35 PM GUIA DE SEGURANA DO PRODUTO E EXPOSIO ENERGIA DE RF PARA RDIOS PORTTEIS BIDIRECIONAIS ATENO!

Antes de usar o rdio, leia este guia que contm instrues operacionais importantes para uso seguro, informaes sobre conscientizao e controle de exposio energia de radiofrequn-

cia (RF) para conformidade com os padres e regulamentos aplicveis. MOTOROLA, MOTO, MOTOROLA SOLUTIONS e o logotipo "M" estilizado so marcas comerciais ou marcas registradas da Motorola Trademark Holdings, LLC e so utilizadas sob licena. Todas as demais marcas registradas so de propriedade de seus respectivos proprietrios. 20072015 Motorola Solutions, Inc. Todos os direitos reservados. Portugus

(Brasil) 6881095C98_SafetyP.book Page 2 Wednesday, March 4, 2015 2:35 PM Informaes sobre Conscientizao e Controle de Exposio RF e Instrues Operacionais para Uso Ocupacional COMUNICADO: Este rdio destina-se ao uso em condies ocupacionais/

controladas, em que os usurios tm total conhecimento de sua exposio e possam exercer controle sobre sua exposio para atender aos limites ocupacionais definidos pela FCC e pelos padres internacionais. O dispositivo de rdio NO autorizado para uso pela populao em geral. Este rdio bidirecional usa energia eletromagntica no espectro de RF para fornecer comunicao entre dois ou mais usurios distncia. Ele usa energia de RF ou ondas de rdio para enviar e receber chamadas. A energia de RF uma forma de energia eletromagntica. Outras formas incluem, mas no so limitadas a, raios, raios solares e raios X. A energia de RF, entretanto, no deve ser confundida com essas outras formas de energia eletromagntica, que quando so usadas incorretamente, podem causar danos biolgicos. Nveis muito altos de raios X, por exemplo, podem danificar tecidos e material gentico. Especialistas em cincias, engenharia, medicina, sade e indstrias trabalham com organizaes para desenvolver padres de exposio segura energia de RF. Esses padres fornecem nveis recomendados de exposio RF para trabalhadores e para o pblico em geral. Os nveis recomendados de exposio RF incluem margens de segurana substanciais. Todos os rdios bidirecionais da Motorola so projetados, fabricados e testados para garantir que atendam aos nveis de exposio RF estabelecidos pelo governo. Alm disso, os fabricantes tambm recomendam instrues operacionais especficas para usurios de rdios bidirecionais. Essas instrues so importantes porque informam aos usurios sobre a exposio energia de RF e fornecem procedimentos simples sobre como controlar essa exposio. Portugus

(Brasil) 2 6881095C98_SafetyP.book Page 3 Wednesday, March 4, 2015 2:35 PM Consulte os sites a seguir para obter mais informaes sobre a exposio energia de RF e como controlar a exposio para garantir conformidade com os limites de exposio RF estabelecidos:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/

http://responsibility.motorolasolutions.com/index.php/downloads/dow07-

rfexposureassessmentstand Regulamentos da FCC Ao usar rdios bidirecionais por motivos de trabalho, a FCC (Federal Communication Commission, comisso federal de comunicao) requer que os usurios estejam totalmente conscientes e aptos a controlar sua exposio de modo a atender s exigncias ocupacionais. A conscientizao da exposio pode ser facilitada pelo uso de uma etiqueta no produto, direcionando o usurio para informaes de conscientizao especficas do usurio. O rdio bidirecional da Motorola possui uma Etiqueta no Produto sobre Exposio RF. Alm disso, o manual do usurio da Motorola, ou folheto de segurana em separado, inclui informaes e instrues operacionais necessrias para controlar a exposio RF e atender aos requisitos de conformidade. Conformidade com os Padres de Exposio RF O rdio bidirecional da Motorola foi projetado e testado para estar em confor-

midade com vrios padres e com as diretrizes nacionais e internacionais

(listados a seguir) para exposio de seres humanos energia eletromagntica de radiofrequncia. Este rdio est em conformidade com os limites de exposio IEEE (FCC) e ICNIRP para ambientes ocupacionais/controlados de exposio RF em fatores operacionais de trabalho de at 50% de fala e 50% de escuta e est aprovado apenas para uso ocupacional. Para medio de energia de RF para conformidade com essas diretrizes de exposio, o rdio gera energia de RF mensurvel apenas quando est transmitindo (na fala), no quando est recebendo (escuta) ou no modo de espera. 3 Portugus

(Brasil) 6881095C98_SafetyP.book Page 4 Wednesday, March 4, 2015 2:35 PM NOTA: As baterias aprovadas, fornecidas com o rdio, so para um fator de trabalho 5-5-90 (5% de fala-5% de escuta-90% de espera) apesar de o rdio estar em conformidade com os limites de exposio ocupacional da FCC e poder operar em fatores de trabalho de at 50% de fala. O rdio bidirecional da Motorola est em conformidade com os seguintes padres e diretrizes de exposio de energia de RF:

Cdigo de Regulamentos Federais da FCC; 47 CFR et seq. e FCC, OET Boletim 65 IEEE C95.1 ICNIRP (International Commission on Non-ionizing Radiation Protection, comisso internacional para a proteo contra as radiaes no ionizantes) Cdigo de segurana 6 do Ministrio da Sade (Canad) e da Indstria Canadense RSS-102 Australian Communications Authority Radiocommunications Standard et seq. ANEXO da ANATEL Resoluo n 303 et seq. Diretrizes de Conformidade e Controle de Exposio RF e Instrues Operacionais Relacionadas a Operaes de Rdios Bidirecionais Para controlar a exposio e garantir conformidade com os limites de exposio em ambientes ocupacionais/controlados, siga sempre os procedimentos a seguir. NO remova a Etiqueta de Exposio RF do dispositivo. As instrues de conscientizao do usurio devem acompanhar o dispositivo quando transferido para outros usurios. Portugus

(Brasil) 4 6881095C98_SafetyP.book Page 5 Wednesday, March 4, 2015 2:35 PM Operao do Rdio Bidirecional No transmitir alm do fator calculado nominal de 50% do tempo. Para transmitir (falar), pressione o boto PTT (Push-To-Talk). Para receber chamadas, solte o boto PTT. O boto PTT pode estar localizado no rdio ou em acessrios aprovados com ou sem fio (por exemplo, um boto PTT remoto compatvel com Bluetooth). importante transmitir em 50% do tempo ou menos, pois este rdio gera exposio RF mensurvel somente ao transmitir

(em termos de medio para conformidade de padres). Em frente ao rosto. Segure o rdio na posio vertical com o microfone (e outras partes do rdio incluindo a antena) a, no mnimo, 2,5 centmetros de distncia do nariz e da boca. Manter o rdio a uma distncia apropriada importante para garantir a conformidade. NOTA: Quanto maior o distanciamento da antena, menores as exposies RF. Uso junto ao corpo. Ao usar o rdio junto ao corpo, coloque-o em um prendedor, suporte, suporte para cinto ou estojo para este produto aprovado pela Motorola. importante usar os acessrios aprovados para uso junto ao corpo, porque o uso de acessrios no aprovados pela Motorola pode resultar em nveis de exposio que excedem os limites de exposio RF para ambiente ocupacional/controlado. Use somente antenas, baterias e acessrios de udio fornecidos ou de substituio aprovados pela Motorola. O uso de antenas, baterias e acessrios com ou sem fio no aprovados pela Motorola pode exceder as diretrizes aplicveis de exposio RF (iEEE, ICNIRP ou FCC). Para obter uma lista de acessrios aprovados pela Motorola para o modelo de seu rdio, acesse o site: http://www.motorolasolutions.com/US-EN/

Business+Product+and+Services/Accessories/Two-Way+Radio+Accessories 5 Portugus

(Brasil) 6881095C98_SafetyP.book Page 6 Wednesday, March 4, 2015 2:35 PM Interferncia/Compatibilidade Eletromagntica NOTA: Quase todo dispositivo eletrnico suscetvel interferncia eletromagntica (EMI) quando blindado, projetado ou de alguma forma configurado inadequadamente para compatibilidade eletromagntica. Instalaes Para evitar interferncia eletromagntica e/ou conflitos de compatibilidade, desligue o rdio em qualquer instalao onde haja avisos dizendo para faz-lo. Hospitais e casas de sade podem utilizar equipamentos sensveis energia de RF externa. Aeronaves Desligue seu rdio a bordo de aeronaves, quando orientado a faz-lo. O rdio deve ser utilizado de acordo com as instrues fornecidas pela tripulao. Equipamentos Mdicos Marca-passos, desfibriladores ou outros dispositivos mdicos implantados Pessoas com marca-passos, desfibriladores cardiovasculares implantveis

(ICDs) ou outros dispositivos mdicos implantveis ativos (AIMD) devem:

Entre e contato com seus mdicos sobre o possvel risco de interferncia de transmissores frequncia de rdio, como rdios portteis (dispositivos mdicos com pouca proteo podem ser mais suscetveis interferncia). DESLIGUE o rdio imediatamente se houver qualquer motivo para se suspeitar de interferncia. No carregue o rdio em um bolso prximo ao peito ou rea do implante;

transporte ou use o rdio no lado oposto do dispositivo implantvel para minimizar possveis interferncias. Portugus

(Brasil) 6 6881095C98_SafetyP.book Page 7 Wednesday, March 4, 2015 2:35 PM Aparelhos Auditivos Alguns rdios digitais sem fio podem interferir em aparelhos auditivos. Caso haja esse tipo de interferncia, consulte o fabricante do aparelho auditivo para obter alternativas. Outros Equipamentos Mdicos Caso use outros equipamentos mdicos, consulte o fabricante para verificar se ele est adequadamente protegido contra energia de RF. Seu mdico pode ajud-lo a obter essas informaes. Uso de Equipamentos de Comunicao Durante a Operao de Veculos Informe-se sempre sobre as leis e normas a respeito do uso de rdios nas reas onde voc dirige. Preste ateno no trnsito e na rodovia. Use a opo viva-voz, se disponvel. Saia da rodovia e estacione o carro antes de fazer ou receber uma ligao, se as condies de trnsito ou as regulamentaes assim exigirem. 7 Portugus

(Brasil) 6881095C98_SafetyP.book Page 8 Wednesday, March 4, 2015 2:35 PM Segurana Acstica A exposio a rudos muito altos de qualquer origem por longos perodos pode prejudicar sua audio temporria ou permanentemente. Quanto mais alto for o volume do rdio, menos tempo ser necessrio para prejudicar sua audio. s vezes, os danos auditivos causados por rudos fortes no so detectados em sua fase inicial e podem ter efeito cumulativo. Para proteger sua audio:

Use o volume mais baixo necessrio para a execuo da sua tarefa. Aumente o volume somente se estiver em ambientes barulhentos. Reduza o volume antes de conectar o headset ou o fone de ouvido. Limite o tempo de uso dos headsets ou fones de ouvido com volume alto. Ao usar o rdio sem monofones ou fones de ouvido, no coloque o alto-falante do rdio diretamente em contato com seus ouvidos. Avisos Operacionais AV I S O Para Veculos Equipados com Air Bag:

Consulte o manual do fabricante do veculo antes de instalar equipamentos eletrnicos para evitar interferncia com o funcionamento do air bag. NO coloque um rdio porttil na rea sobre um air bag ou na rea de liberao do air bag, pois eles inflam com muita fora. Se um rdio porttil estiver colocado na rea de liberao do air bag e o air bag inflar, o rdio poder ser impelido com grande fora e causar srios ferimentos aos ocupantes do veculo. Portugus

(Brasil) 8 6881095C98_SafetyP.book Page 9 Wednesday, March 4, 2015 2:35 PM Avisos Operacionais (continuao) AV I S O Ambientes Potencialmente Explosivos

(Ambientes potencialmente explosivos referem-se a locais classificados como de risco que podem conter gases, vapores ou ps nocivos.) Desligue o rdio antes de entrar em uma rea com atmosfera potencialmente explosiva, a menos que ele seja um tipo de rdio porttil especialmente qualificado para o uso em tais reas como Intrinsecamente Seguro (por exemplo, Factory Mutual, CSA, UL, ATEX ou IECEx). NO remova, instale ou carregue baterias nessas reas. Fascas em um ambiente potencialmente explosivo podem causar uma exploso ou incndio que pode resultar em ferimentos e at mesmo em morte. As reas com ambientes potencialmente explosivos referidas acima incluem reas de abastecimento, como reas abaixo do convs principal em barcos, instalaes de armazenamento ou transferncia de produtos qumicos ou combustveis e reas onde o ar contm partculas ou elementos qumicos, como fibras, poeira ou ps metlicos. As reas com ambientes potencialmente explosivos so frequentes, mas nem sempre h avisos sobre isso. reas e Equipamentos para Detonao Para evitar possveis interferncias em operaes de detonao, desligue o rdio quando estiver prximo a detonadores eltricos, reas de detonao ou reas onde haja avisos tais como:

"Desligue o rdio bidirecional." Obedea a todas as sinalizaes e instrues. 9 Portugus

(Brasil) 6881095C98_SafetyP.book Page 10 Wednesday, March 4, 2015 2:35 PM Cuidados Operacionais

!

Ateno Antenas NO utilize um rdio porttil com antena danificada. Se a antena danificada entrar em contato com sua pele, poder causar uma queimadura leve. Avisos Operacionais Regras para o Uso das Baterias A maioria dos problemas relacionados bateria causado pelo manuseio incorreto. Siga estas regras gerais para evitar danos ou ferimentos. SIM Tenha cuidado ao manipular uma bateria carregada, principalmente quando guardada dentro do bolso, de uma bolsa ou em local em que haja objetos de metal. Carregue a bateria usando um carregador aprovado pela Motorola. Carregar a bateria com um equipamento que no seja da Motorola pode reduzir o desempenho e danificar a bateria. Use a bateria de acordo com a sua classificao de Proteo contra a Entrada de gua e/ou poeira (IP). Consulte o guia do usurio e a folha de especificaes do produto para obter mais informaes sobre relevantes ambientes operacionais. Portugus

(Brasil) 10 6881095C98_SafetyP.book Page 11 Wednesday, March 4, 2015 2:35 PM Cuidados Operacionais (Continuao)

!

Ateno Regras para o Uso das Baterias (Continuao) NO No descarte a bateria no fogo. No troque a bateria em lugares identificados como reas de risco. Quaisquer fascas criadas em uma atmosfera potencialmente explosiva podero causar uma exploso ou incndio. No desmonte, comprima, perfure, fragmente ou tente alterar de outra maneira a forma da bateria. No seque baterias molhadas ou midas usando aparelhos ou fontes de calor, como secadores de cabelo ou fornos de micro-ondas. Se os terminais de contato da bateria ficarem submersos na gua, seque e limpe os contatos da bateria antes de coloc-la no rdio. No permita que material condutor como joias, chaves ou correntes entre em contato os terminais da bateria. O material condutor pode completar um circuito eltrico ou curto-circuito e aquecer. Informaes do Rdio em Locais de Risco A unidade de aprovao Locais de Risco refere-se a um produto que foi aprovado para uso em Locais de Risco por um rgo de aprovao

(por exemplo, FM Approvals, CSA, UL, ATEX ou IECEx) e certifica que um determinado produto atende aos padres aplicveis do rgo para Locais de Risco. Um rdio porttil que foi aprovado para Locais de Risco apresentar uma etiqueta de Aprovao para identificar a unidade como Aprovada para o uso nas atmosferas de risco especificadas. Essa etiqueta especifica a classe, a diviso e o grupo dos Locais de Risco, bem como o nmero de pea da bateria que dever ser utilizada com o rdio aprovado. 11 Portugus

(Brasil) 6881095C98_SafetyP.book Page 12 Wednesday, March 4, 2015 2:35 PM Cuidados Operacionais para Equipamentos de Rdio em Locais de Risco

!

NO opere o equipamento de comunicaes de rdio em atmosferas de risco a menos que ele seja de um tipo especialmente certificado

(por exemplo, FM, UL, CSA, ATEX ou IECEx). O uso de uma unidade no aprovada pode resultar em uma condio insegura. Ateno NO opere uma unidade de rdio aprovada para o uso em Locais de Risco se ela estiver danificada fisicamente (por exemplo, parte externa rachada). Isso pode resultar em uma condio insegura. NO substitua ou carregue baterias em atmosfera de risco. Podem ocorrer fascas nos contatos durante a instalao ou remoo das baterias. NO use o rdio em Locais de Risco alm dos permitidos pela classificao do equipamento. Os rdios devem ser fornecidos de uma instalao de fabricao da Motorola com o projeto aprovado para Locais de Risco e etiqueta (FM, UL, CSA, ATEX, IECEx). Os rdios no sero atualizados para esse recurso e etiquetados depois de serem enviados. Uma modificao altera o hardware da unidade de sua configurao de projeto certificado Aprovado. As modificaes podem ser feitas apenas pelo fabricante original do produto. Outras mensagens e instrues para a utilizao segura de rdios em Locais de Risco podem ser encontradas no manual de segurana para Locais de Risco especfico. Portugus

(Brasil) 12 6881095C98_SafetyP.book Page 1 Wednesday, March 4, 2015 2:35 PM RADIOS BIDIRECTIONNELLES PORTATIVES :

EXPOSITION AUX RADIOFRQUENCES ET SCURIT DU PRODUIT ATTENTION!

Avant d'utiliser cette radio, lisez le guide qui contient d'importantes instructions de fonctionnement pour une utilisation scuritaire et DES informations sur l'exposition aux frquences radiolectriques, dans le but dassurer votre conformit aux normes et rglements en vigueur. MOTOROLA, MOTO, MOTOROLA SOLUTIONS et le logotype au M stylis sont des marques de commerce ou des marques dposes de Motorola Trademark Holdings, LLC et sont utilises sous licence. Toutes les autres marques de commerce sont la proprit de leurs titulaires respectifs. Motorola Solutions, Inc., 20072015. Tous droits rservs. Franais canadien 6881095C98_SafetyP.book Page 2 Wednesday, March 4, 2015 2:35 PM Sensibilisation l'exposition l'nergie de RF, moyens de contrle et consignes d'utilisation pour l'usage professionnel de cette radio NOTICE : Cette radio a t conue pour un usage professionnel dans un environnement contrl, o les utilisateurs sont pleinement conscients de l'exposition l'nergie de RF laquelle ils sont soumis et peuvent exercer un contrle sur cette exposition afin de respecter les limites tablies par la FCC et les normes internationales. Ce dispositif radio n'est PAS autoris pour l'utilisation grand public par des consommateurs ordinaires. Cette radio bidirectionnelle utilise de l'nergie lectromagntique dans le spectre de radiofrquence (RF) afin de permettre les communications distance entre deux utilisateurs ou plus. Elle utilise l'nergie de radiofrquence ou les ondes radio pour mettre et recevoir des appels. L'nergie de RF est une forme d'nergie lectromagntique. Ce type d'nergie se prsente sous d'autres formes, notamment la lumire solaire et les rayons X. Il ne faut cependant pas confondre l'nergie de RF avec d'autres formes d'nergie lectromagntique qui, lorsqu'elles sont mal utilises, peuvent occasionner des dommages biologiques. Des niveaux trs levs de rayons X, par exemple, peuvent endommager les tissus et le matriel gntique. Des spcialistes dans les domaines des sciences, de l'ingnierie, de la mdecine, de la sant et de l'industrie travaillent avec diffrentes organisations l'laboration de normes relatives l'exposition scuritaire l'nergie de RF. Ces normes fournissent les niveaux recommands d'exposition aux RF, tant pour les travailleurs que pour le public en gnral. Ces niveaux recommands d'exposition aux RF comprennent des coefficients de scurit apprciables. Franais canadien 2 6881095C98_SafetyP.book Page 3 Wednesday, March 4, 2015 2:35 PM Toutes les radios bidirectionnelles Motorola sont conues, fabriques et testes de manire garantir leur conformit aux niveaux d'exposition aux radiofrquences tablis par les autorits publiques comptentes. Par ailleurs, les fabricants recommandent aux utilisateurs de radios bidirectionnelles de suivre des directives de fonctionnement spcifiques. Ces directives sont importantes puisqu'elles informent les utilisateurs sur l'exposition l'nergie de RF et proposent des moyens simples pour la contrler. Visitez les sites Web suivants pour obtenir plus de renseignements sur ce qu'est l'nergie de RF et sur les moyens de contrle prendre afin de respecter les limites tablies en matire d'exposition aux radiofrquences :

http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/fr/

http://responsibility.motorolasolutions.com/index.php/downloads/dow07-

rfexposureassessmentstand Rglements de la Commission fdrale amricaine des communications (FCC) Lorsque les radios bidirectionnelles sont utilises des fins professionnelles, la FCC exige que les utilisateurs soient pleinement conscients des effets de l'exposition et qu'ils soient capables de contrler le niveau d'exposition auquel ils se soumettent afin de rpondre aux exigences de leur profession. Vous pouvez contribuer la sensibilisation des utilisateurs l'exposition aux radiofrquences en apposant des tiquettes de produit leur offrant une rfrence vers la source d'information approprie. Votre radio bidirectionnelle Motorola comporte une tiquette de produit sur l'exposition aux radiofrquences. D'autre part, vous trouverez dans le manuel de l'utilisateur du produit Motorola ou dans la brochure de scurit fournie sparment les informations requises et le mode d'emploi permettant de contrler l'exposition l'nergie de RF et de garantir le respect des normes. 3 Franais canadien 6881095C98_SafetyP.book Page 4 Wednesday, March 4, 2015 2:35 PM Conformit aux normes sur l'exposition aux radiofrquences Cette radio bidirectionnelle Motorola a t conue et teste afin de garantir sa conformit aux normes et recommandations nationales et internationales ci-dessous lies l'exposition des tres humains l'nergie lectromagntique de radiofrquence. Cette radio respecte les limites d'exposition tablies par l'IEEE (FCC) et l'ICNIRP pour les environnements professionnels ou avec contrle d'exposition aux radiofrquences, des cycles d'utilisation allant jusqu' 50 % mission50 % rception et est approuve pour un usage professionnel seulement. En ce qui concerne la mesure de l'nergie de RF afin d'valuer la conformit ces normes d'exposition, la radio met de l'nergie de RF mesurable seulement lorsqu'elle est en mode mission (lorsque l'utilisateur parle), et non pas lorsqu'elle est en mode rception (lorsque l'utilisateur coute) ni en mode Attente. REMARQUE : Les batteries approuves, fournies avec cette radio, sont cotes en fonction d'un cycle d'utilisation de 5-5-90 (5 % mission5 %

rception90 % attente), mme si la radio respecte les limites d'exposition tablies par la FCC pour l'usage professionnel et peut fonctionner selon des cycles d'utilisation allant jusqu'

50 % mission. Cette radio bidirectionnelle Motorola est conforme aux normes et aux lignes directrices suivantes relatives l'exposition l'nergie de RF :

Commission fdrale amricaine des communications (FCC), Code of Federal Regulations (code de la rglementation fdrale); FCC 47 partie CFR et suiv. FCC, OET Bulletin 65 Institute of Electrical and Electronic Engineers (IEEE) C95.1 Commission internationale de protection contre les rayonnements non ionisants

(ICNIRP) Franais canadien 4 6881095C98_SafetyP.book Page 5 Wednesday, March 4, 2015 2:35 PM Code de scurit 6 du Ministre de la Sant (Canada) et norme CNR-102 d'Industrie Canada Norme de l'Australian Communications Authority Radiocommunications et suiv. ANATEL ANNEXE la Rsolution N 303 et suiv. Directives de conformit et de contrle de l'exposition aux RF et directives de fonctionnement pour la communication bidirectionnelle Pour contrler votre exposition et garantir le respect des limites d'exposition en milieu professionnel ou contrl, observez toujours les consignes suivantes. NE dcollez PAS l'tiquette sur l'exposition l'nergie de RF du dispositif. Lorsque l'appareil est cd d'autres utilisateurs, il doit tre accompagn des informations de sensibilisation des utilisateurs. Communication bidirectionnelle Transmission ne dpassant pas le facteur nominal de 50 % du temps. Pour transmettre (parler), appuyez sur le bouton de transmission (PTT). Pour recevoir les appels, relchez le bouton de transmission. Le bouton PTT peut se trouver sur la radio elle-mme ou sur un accessoire avec ou sans fil approuv (par exemple, un bouton de transmission Bluetooth distant). Il est important de ne pas mettre plus de 50 % du temps tant donn que cette radio gnre une nergie de RF dont l'exposition n'est mesurable que lors de l'mission (en termes de conformit aux normes de mesure). Devant le visage. Tenez la radio la verticale, en maintenant une distance d'au moins 2,5 centimtres (1 pouce) entre le micro (et les autres parties de la radio, y compris l'antenne) et le nez ou les lvres. Garder la radio une distance approprie est important afin de garantir le respect des limites. 5 Franais canadien 6881095C98_SafetyP.book Page 6 Wednesday, March 4, 2015 2:35 PM REMARQUE : L'exposition aux radiofrquences diminue quand la distance de l'antenne augmente. Utilisation lorsque la radio est porte sur soi. Lorsque la radio est porte sur soi, utilisez toujours une pince ou une attache de ceinture, placez-la dans un tui ou dans un harnais pour le corps approuv par Motorola pour ce produit. Il est important d'utiliser des accessoires ajusts au corps qui sont approuvs, car dans le cas contraire, l'utilisateur risque de s'exposer des niveaux d'nergie de RF suprieurs aux limites tablies pour les environnements professionnels ou exposition contrle. N'utilisez que des antennes, des batteries et des accessoires audio fournis ou de remplacement approuvs par Motorola. L'utilisation d'antennes, batteries et accessoires avec ou sans fil non approuvs par Motorola pourrait excder les directives d'exposition aux RF applicables (IEEE, ICNIRP ou FCC). Pour une liste des accessoires approuvs par Motorola pour votre modle de radio, visitez le site Web suivant : http://www.motorolasolutions.com/US-EN/

Business+Product+and+Services/Accessories/Two-Way+Radio+Accessories Interfrence/compatibilit lectromagntique REMARQUE : La grande majorit des dispositifs lectroniques sont sensibles l'effet lectromagntique perturbateur (EMI) s'ils ne sont pas convenablement protgs ou s'ils ne sont pas conus ou configurs afin d'tre compatibles avec ce type de signaux lectromagntiques. Btiments Afin d'viter des problmes d'interfrence et/ou de compatibilit lectromagntique, teignez la radio lorsque cette consigne est affiche sur un panneau. Il se peut, par exemple, que les hpitaux ou les tablissements de sant utilisent des appareils sensibles l'nergie de RF externe. Franais canadien 6 6881095C98_SafetyP.book Page 7 Wednesday, March 4, 2015 2:35 PM Aronefs bord d'un avion, teignez la radio lorsque l'quipage vous le demande. Toute utilisation de la radio doit se faire conformment aux rglements en vigueur de la compagnie arienne et sur instructions de l'quipage. Appareils mdicaux Stimulateurs cardiaques, dfibrillateurs ou autres appareils mdicaux implants Les personnes portant un stimulateur cardiaque, un dfibrillateur implantable ou autre appareil mdical actif implant doivent :

Consulter leur mdecin au sujet des risques potentiels d'interfrences que prsentent les metteurs radiofrquences, tels que les radios portables (les appareils mdicaux faiblement blinds sont plus vulnrables aux interfrences). teindre la radio immdiatement si elles ont des raisons de penser qu'il existe une interfrence quelconque. Ne pas transporter la radio dans une poche de poitrine ou proximit du site d'implantation de l'appareil mdical, et utiliser la radio du ct oppos celui o se trouve l'appareil afin de minimiser le potentiel d'interfrence. Prothses auditives Certaines radios numriques sans fil peuvent interfrer avec certains types de prothses auditives. Si tel est le cas, veuillez consulter le fabricant de la prothse auditive pour discuter d'autres solutions possibles. Autres dispositifs mdicaux Si vous utilisez tout autre dispositif mdical personnel, consultez le fabricant du dispositif afin de dterminer s'il est convenablement protg contre l'nergie de RF externe. Votre mdecin peut vous aider obtenir ces renseignements. 7 Franais canadien 6881095C98_SafetyP.book Page 8 Wednesday, March 4, 2015 2:35 PM Utilisation de dispositifs de communication pendant la conduite d'un vhicule Vrifiez toujours les lois et rglements relis l'utilisation des radios dans les rgions o vous conduisez. Concentrez-vous entirement sur votre conduite et sur la route. Utilisez le mode mains libres, s'il est disponible. Rangez-vous sur l'accotement avant de faire un appel ou d'y rpondre si les conditions de conduite sont particulirement mauvaises ou si les lois et rglements l'exigent. Protection de l'oue Une exposition des bruits forts en provenance de n'importe quelle source pendant de longues priodes de temps pourrait affecter votre audition de manire temporaire ou permanente. Plus le volume sonore de la radio est lev, plus votre audition peut se dtriorer rapidement. Des dommages auditifs dus l'exposition des bruits forts peuvent d'abord tre indtectables, mais ceux-ci ont parfois des effets cumulatifs. Pour protger votre audition :

Rglez le volume le plus bas possible pour effectuer votre travail. Montez le volume seulement si vous vous trouvez dans un environnement bruyant. Baissez le volume avant d'ajouter un casque ou une oreillette. Limitez la priode de temps d'utilisation de casques ou d'couteurs volume lev. Lorsque vous utilisez la radio sans casque ni couteur, ne placez pas le haut-

parleur directement sur votre oreille. Franais canadien 8 6881095C98_SafetyP.book Page 9 Wednesday, March 4, 2015 2:35 PM Avertissements de fonctionnement AVERTISSEMENT Pour les vhicules quips de coussins gonflables :

Consultez le manuel du fabricant du vhicule avant d'installer un appareil lectronique, afin d'viter toute interfrence avec le cblage des coussins gonflables. NE placez PAS de radio portative dans la zone situe au-dessus d'un coussin gonflable ou dans la zone de dploiement de ce dernier. Un coussin gonflable de scurit se dploie avec beaucoup de force. Si une radio portative se trouve dans la zone de dploiement du coussin lorsque celui-ci se gonfle, la radio peut tre propulse avec une force considrable et risque alors d'occasionner de graves lsions corporelles aux passagers du vhicule. 9 Franais canadien 6881095C98_SafetyP.book Page 10 Wednesday, March 4, 2015 2:35 PM Avertissements de fonctionnement (suite) AVERTISSEMENT Atmosphres potentiellement explosives

(Les atmosphres explosives sont des endroits classifis comme dangereux, pouvant contenir des vapeurs, des poudres ou des gaz dangereux.) teignez la radio avant d'entrer dans un milieu avec une atmosphre potentiellement explosive, sauf s'il s'agit d'une radio portative de type scurit intrinsque spcialement conue pour l'utilisation dans un tel milieu (par exemple, s'il s'agit d'une radio homologue par Factory Mutual, CSA, UL, ATEX ou IECEx). VITEZ d'enlever, de remplacer ou de recharger les batteries dans un tel milieu. Les tincelles dans des atmosphres potentiellement explosives peuvent provoquer une explosion ou un incendie et entraner des lsions corporelles, voire la mort. Parmi les zones potentiellement explosives mentionnes plus haut, citons les zones de ravitaillement en carburant, par exemple la cale des bateaux, les installations de transfert et de stockage de carburant ou de produits chimiques et les zones dans lesquelles l'air est charg en produits chimiques ou en particules telles que de la poudre de crales, de la poussire ou des poudres mtalliques. Les zones atmosphres potentiellement explosives affichent gnralement des panneaux de mise en garde, mais ce n'est pas toujours le cas. Zone de dynamitage et de dtonateurs teignez la radio lorsque vous vous trouvez proximit de dtona-

teurs lectriques ou dans une zone de dynamitage afin d'viter de dclencher une explosion, ou lorsque vous vous trouvez dans un endroit o il est indiqu : teindre les radios bidirectionnelles . Respectez tous les panneaux et toutes les consignes. Franais canadien 10 6881095C98_SafetyP.book Page 11 Wednesday, March 4, 2015 2:35 PM Prcautions relatives au fonctionnement

!

Mise en garde Antennes N'utilisez PAS une radio portative, quelle qu'elle soit, dont l'antenne est endommage. Si une antenne endommage entre en contact avec votre peau, il peut en rsulter une brlure lgre. Avertissements de fonctionnement Ce qu'on doit faire et viter avec les batteries La plupart des problmes de batterie proviennent d'une mauvaise manipulation. Suivez ces rgles gnrales pour viter les blessures et les dommages. FAIRE Manipulez avec prcaution les batteries charges, en particulier lorsqu'elles sont places dans une poche, un sac main ou un endroit contenant des objets mtalliques. Rechargez votre batterie avec un chargeur approuv par Motorola. La recharge avec des chargeurs non approuvs par Motorola peut entraner une baisse du rendement et endommager la batterie. Utilisez la batterie conformment son indice de protection (IP) contre l'eau et la poussire. Reportez-vous au guide d'utilisation et la fiche des caractristiques du produit pour plus d'informations sur les environnements de fonctionnement pertinents. 11 Franais canadien 6881095C98_SafetyP.book Page 12 Wednesday, March 4, 2015 2:35 PM Prcautions relatives au fonctionnement (suite)

!

Mise en garde Ce quon doit faire et viter avec les batteries (suite) NE PAS FAIRE Ne jetez pas votre batterie au feu. Ne remplacez pas la batterie dans un endroit qui porte la mention atmosphre dangereuse . Une tincelle cre en atmosphres potentiellement explosives peut provoquer une explosion ou un incendie. Veillez ne pas dmonter, craser, percer, dcouper ou autrement modifier la forme de votre batterie. Ne faites pas scher une batterie mouille ou humide avec un appareil lectrique ou une autre source de chaleur, comme un schoir cheveux ou un four micro-ondes. Si la zone de contact de la batterie de la radio est submerge, nettoyez et schez les contacts de batterie avant de connecter cette dernire lappareil. Ne laissez pas objet conducteur, comme un bijou, une cl ou les mailles d'une chane, entrer en contact avec les bornes de la batterie. Le matriau conducteur risque de fermer un circuit lectrique, ou un court-circuit, et de devenir trs chaud. Franais canadien 12 6881095C98_SafetyP.book Page 13 Wednesday, March 4, 2015 2:35 PM Informations sur l'utilisation de radios dans des endroits dangereux L'homologation pour utilisation dans des endroits dangereux indique qu'un produit a t approuv par un service d'homologation (par exemple, FM Approvals, CSA, UL, ATEX, ou IECEx) afin d'tre utilis dans des endroits dangereux et certifie qu'un produit particulier rpond aux normes applicables du service d'homologation en matire d'endroits dangereux. Une radio portative homologue pour des endroits dangereux doit porter l'tiquette d'homologation correspondante qui l'iden-

tifie comme pouvant tre utilise dans des atmosphres dangereuses spcifies. L'tiquette prcise la catgorie d'endroits dangereux (Classe/Division/Groupe), ainsi que le numro de pice de la batterie qui doit tre utilis. Prcautions relatives au fonctionnement d'quipement radio dans des endroits dangereux

!

Mise en garde NE PAS faire fonctionner d'quipement de communication radio dans une atmosphre dangereuse moins qu'il ne soit d'un type appropri

(par exemple, homologu par FM, UL, CSA, ATEX, ou IECEx). L'utilisation de radio non homologue peut crer une situation de risque. NE PAS faire fonctionner une radio qui a t homologue pour une utilisation dans des endroits dangereux si elle a t endommage physiquement (par exemple, botier fissur). Cela peut entraner une situation de risque. NE PAS remplacer NI charger des batteries dans une atmosphre dangereuse. Des tincelles peuvent se produire lors de l'installation ou du retrait des batteries. N'utilisez PAS la radio dans des endroits dangereux autres que ceux pour lesquels elle est homologue. 13 Franais canadien 6881095C98_SafetyP.book Page 14 Wednesday, March 4, 2015 2:35 PM Les radios doivent tre expdies de l'usine de fabrication Motorola avec les plans de conception et les tiquettes d'homologation pour les endroits dangereux

(FM, UL, CSA, ATEX, IECEx). Les radios ne pourront tre mises niveau afin d'offrir cette caractristique ni tre tiquetes comme telles une fois expdies et achemines sur le terrain. Toute modification change la configuration du modle d'origine des composants de l'unit. Les modifications ne peuvent tre effectues que par le fabricant du produit d'origine. Pour de plus amples avertissements et instructions sur l'utilisation des radios dans les endroits dangereux, consultez le manuel de scurit sur les endroits dangereux. Franais canadien 14 6881095C98_SafetyP.book Page 1 Wednesday, March 4, 2015 2:35 PM GUA DE EXPOSICIN DE ENERGA DE RADIOFRECUENCIA Y SEGURIDAD DEL PRODUCTO PARA RADIOS DE DOS VAS PORTTILES ATENCIN Antes de usar este radio, lea esta gua que contiene instrucciones de funcionamiento importantes para un uso seguro del dispositivo, e instrucciones para tomar conciencia y controlar la energa de radiofrecuencia con el objetivo de cumplir con las normas y regulaciones correspondientes. MOTOROLA, MOTO, MOTOROLA SOLUTIONS y el logotipo de la M estilizada son marcas comerciales o marcas comerciales registradas de Motorola Trademark Holdings, LLC y se utilizan bajo licencia. Todas las dems marcas comerciales pertenecen a sus respectivos dueos. 20072015 Motorola Solutions, Inc. Todos los derechos reservados. Espaol

(Latinoamrica) 6881095C98_SafetyP.book Page 2 Wednesday, March 4, 2015 2:35 PM Informacin para tomar conciencia y controlar la exposicin a la energa de RF e instrucciones de funcionamiento para uso profesional AVISO: Este radio est diseado para usarse en condiciones controladas o profesionales, donde los usuarios tengan pleno conocimiento de su exposicin y puedan controlar su exposicin para cumplir con los lmites profesionales de la FCC y de los estndares internacionales. Este dispositivo de radio NO est autorizado para el uso particular de la poblacin en general. Este radio de dos vas utiliza energa electromagntica en el espectro de la radiofrecuencia (RF) para lograr la comunicacin a distancia entre dos o ms usuarios. Emplea energa de radiofrecuencia (RF) u ondas de radio para enviar y recibir llamadas. La energa de RF es una forma de energa electromagntica. Entre otras formas estn, por ejemplo, la luz solar y los rayos X. Sin embargo, no debe confundirse la energa de RF con otras formas de energa electromagntica que, si se usan de manera incorrecta, pueden producir daos biolgicos. Los niveles muy elevados de rayos X, por ejemplo, pueden daar los tejidos y el material gentico. Expertos en ciencias, ingeniera, medicina, salud e industria trabajan con ciertas organizaciones para desarrollar estndares para una exposicin segura a la energa de RF. Estos estndares indican los niveles recomendados de exposicin a radiofrecuencia, tanto para los trabajadores como para el pblico en general. Estos niveles de exposicin a radiofrecuencia incluyen mrgenes de proteccin bastante amplios. Espaol

(Latinoamrica) 2 6881095C98_SafetyP.book Page 3 Wednesday, March 4, 2015 2:35 PM Todos los radios de dos vas de Motorola han sido diseados, fabricados y probados para garantizar que cumplan con los niveles de exposicin a la radiofrecuencia establecidos por el gobierno. Adems, los fabricantes entregan instrucciones de funcionamiento especficas recomendadas para los usuarios de radios de dos vas. Estas instrucciones son relevantes, ya que informan al usuario acerca de la exposicin a la energa de RF y ofrecen procedimientos sencillos para controlar dicha energa. Consulte los siguientes sitios web para obtener informacin adicional acerca de la exposicin a la energa de RF y de cmo controlarla para garantizar el cumplimiento de los lmites de exposicin establecidos:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/

http://responsibility.motorolasolutions.com/index.php/downloads/dow07-

rfexposureassessmentstand Regulaciones de la Comisin Federal de Comunicaciones (FCC) Cuando los radios de dos vas se usan para trabajar, la FCC indica que los usuarios deben conocer y poder controlar su nivel de exposicin, a fin de cumplir con los requisitos de uso profesional. El conocimiento del nivel de exposicin puede proporcionarse mediante una etiqueta de producto que le muestre al usuario informacin de conocimiento especfica para los usuarios. El radio de dos vas de Motorola tiene una etiqueta de producto de exposicin a RF. Asimismo, el manual de usuario de Motorola y el folleto de seguridad que viene aparte incluyen la informacin y las instrucciones de funcionamiento necesarias para controlar la exposicin a RF y cumplir con los requisitos. 3 Espaol

(Latinoamrica) 6881095C98_SafetyP.book Page 4 Wednesday, March 4, 2015 2:35 PM Cumplimiento de los estndares de exposicin a RF El radio de dos vas de Motorola est diseado y probado de manera tal que cumple con varios estndares y lineamientos nacionales e internacionales

(enumerados ms adelante) en materia de exposicin humana a la energa electromagntica de radiofrecuencia. Este radio cumple con los lmites de exposicin del IEEE (FCC) y de la ICNIRP para ambientes controlados o de uso profesional con exposicin a radiofrecuencia, con factores de funcionamiento de hasta un 50 % de habla y 50 % de escucha, y est aprobado para uso profesional. En cuanto a la medicin de la energa de RF para el cumplimiento de estos lineamientos de exposicin, el radio genera energa de RF que puede medirse solamente mientras realiza una transmisin (cuando el usuario habla) y no al efectuar la recepcin

(escucha) ni en modo de espera. NOTA: Las bateras aprobadas que se entregan con el radio estn clasificadas para un factor de funcionamiento de 5-5-90 (5 % de habla, 5 % de escucha y 90 % en espera), aunque el radio ya cumpla con los lmites de exposicin en uso profesional de la FCC, y pueden funcionar con factores de funcionamiento de hasta un 50 % de habla. El radio de dos vas de Motorola cumple con los siguientes lineamientos y estndares de exposicin a energa de RF:

Comisin Federal de Comunicaciones (FCC, Federal Communications Commission) de los Estados Unidos, Cdigo de Regulaciones Federales; CFR 47 y ss. FCC, Boletn de OET 65 Instituto de Ingenieros Elctricos y Electrnicos (IEEE, Institute of Electrical and Electronics Engineers) C95.1 Comisin Internacional contra las Radiaciones No Ionizantes (ICNIRP, International Commission of Non-Ionizing Radiation Protection) Cdigo de seguridad 6 del Ministerio de Salud (Canad) y RSS-102 del Ministerio de Industria de Canad Espaol

(Latinoamrica) 4 6881095C98_SafetyP.book Page 5 Wednesday, March 4, 2015 2:35 PM Estndar de radiocomunicaciones de la entidad de comunicaciones australiana y ss. ANATEL, Anexo a Resolucin No. 303 y ss. Cumplimiento de exposicin a radiofrecuencia (RF) y lineamientos de control e instrucciones de funcionamiento para radios de dos vas Para controlar su nivel de exposicin y garantizar el cumplimiento de los lmites de exposicin en ambientes controlados o de uso profesional, siga siempre los siguientes procedimientos. NO retire la etiqueta de exposicin a radiofrecuencia del dispositivo. Los lineamientos referentes al uso seguro por parte del usuario deberan entregarse junto con el dispositivo cuando se transfieran a otros usuarios. Funcionamiento del radio de dos vas No transmita ms all del factor de funcionamiento normal del 50 % del tiempo. Para transmitir (hablar), presione el botn Push-to-talk (PTT). Para recibir llamadas, suelte el botn PTT. El botn PTT puede estar en el radio o puede encontrarse en los accesorios con cable o inalmbricos aprobados

(por ejemplo, un botn Push-to-Talk remoto con Bluetooth). La transmisin del 50 % del tiempo, o menos, es importante, porque este radio genera una exposicin a la energa de radiofrecuencia que solamente se puede medir durante la transmisin (en trminos de medicin para el cumplimiento de los estndares). Al frente de la cara. Sostenga el radio en posicin vertical frente a la cara con el micrfono (y las dems partes del radio, incluida la antena) al menos a 2,5 cm (1 pulg.) de distancia de la nariz o los labios. Mantener el radio a una distancia adecuada es importante para garantizar el cumplimiento. 5 Espaol

(Latinoamrica) 6881095C98_SafetyP.book Page 6 Wednesday, March 4, 2015 2:35 PM NOTA: La exposicin a las radiofrecuencias disminuye cuando aumenta la distancia de la antena. Funcionamiento del equipo ajustado al cuerpo. Siempre que use el radio ajustado al cuerpo, pngalo en un clip, un soporte, un estuche, una funda o un arns para el cuerpo aprobado por Motorola para el producto. Es importante el uso de accesorios para llevar el equipo en el cuerpo, porque el uso de accesorios que no estn aprobados por Motorola puede causar que el nivel de exposicin supere los lmites de exposicin a radiofrecuencia en ambientes profesionales o controlados. Use nicamente las antenas, las bateras y los accesorios de audio de repuesto suministradas o aprobadas por Motorola. El uso de antenas, bateras y accesorios con cable o inalmbricos no autorizados por Motorola puede exceder los lineamientos sobre la exposicin a RF aplicables (IEEE, ICNIRP o FCC). Para obtener una lista de los accesorios aprobados por Motorola para el modelo de radio, visite el siguiente sitio web: http://www.motorolasolutions.com/

US-EN/Business+Product+and+Services/Accessories/Two-

Way+Radio+Accessories Interferencia/compatibilidad electromagntica NOTA: Casi todos los dispositivos electrnicos son susceptibles a las interferencias electromagnticas (EMI), si no cuentan con la debida proteccin o si no estn diseados o configurados de manera que sean compatibles con este tipo de seales electromagnticas. Instalaciones Para evitar conflictos de interferencias o de compatibilidad electromagntica, apague el radio en todo sitio donde haya letreros que as lo indiquen. Los hospitales y los establecimientos de atencin de salud podran estar usando equipos sensibles a la energa de RF externa. Espaol

(Latinoamrica) 6 6881095C98_SafetyP.book Page 7 Wednesday, March 4, 2015 2:35 PM Aviones Cuando est a bordo de un avin, apague el radio cuando se le indique. Si usa el radio, deber hacerlo de conformidad con las regulaciones de la lnea area que correspondan y las instrucciones de la tripulacin. Dispositivos mdicos Marcapasos, desfibriladores u otros dispositivos mdicos implantados Las personas con marcapasos, desfibriladores cardioversores implantables

(DCI) u otros dispositivos mdicos implantados activos (AIMD, por su sigla en ingls) debern:

Consultar con su mdico sobre el riesgo potencial de interferencias de frecuencia de radio transmisores tales como radios porttiles (los dispositivos mdicos con mala proteccin pueden ser ms susceptibles a las interferencias). Apagar el radio inmediatamente, si cree que existe alguna razn para sospechar que se est generando interferencia. Mantener el radio alejado del bolsillo de la camisa o lugar del implante, y guardar o utilizar el radio en el lado opuesto del cuerpo del dispositivo implantado para minimizar la posibilidad de interferencias. Audfonos Algunos radios inalmbricos digitales pueden interferir con ciertos audfonos. En caso de que existan interferencias, puede consultar con el fabricante del audfono para buscar posibles alternativas. Otros dispositivos mdicos Si utiliza cualquier otro dispositivo mdico, consulte con el fabricante del dispositivo para determinar si est protegido adecuadamente contra la energa de RF externa. Su mdico podra ayudarlo a obtener esta informacin. 7 Espaol

(Latinoamrica) 6881095C98_SafetyP.book Page 8 Wednesday, March 4, 2015 2:35 PM Uso de dispositivos de comunicacin mientras se conduce Consulte siempre las leyes y las regulaciones para el uso de radios en las zonas donde conduce. Preste toda su atencin a la conduccin y al camino. Use la funcin de manos libres, si est disponible. Salga del camino y estacinese antes de realizar o contestar una llamada, si las condiciones de manejo o las regulaciones relacionadas as lo exigen. Seguridad acstica La exposicin a ruidos fuertes de cualquier fuente durante perodos prolongados podra afectar la audicin de manera temporal o permanente. Cuanto ms alto sea el volumen del radio, ms rpido se ver afectada la audicin. En ocasiones, el dao a la audicin provocado por ruidos fuertes es indetectable en un principio y puede tener efecto acumulativo. Para proteger la audicin:

Utilice el volumen ms bajo que necesite para hacer su trabajo. Aumente el volumen solo si se encuentra en un ambiente ruidoso. Reduzca el volumen antes de conectar los auriculares o el audfono. Limite el tiempo durante el cual usa los auriculares o los audfonos a volumen alto. Cuando use el radio sin audfonos o auriculares, no ponga el altavoz del radio directamente en la oreja. Espaol

(Latinoamrica) 8 6881095C98_SafetyP.book Page 9 Wednesday, March 4, 2015 2:35 PM Advertencias sobre el funcionamiento ADVERTENCIA Para vehculos provistos con bolsa de aire (air bag):

Consulte el manual del fabricante del vehculo antes de instalar equipos electrnicos, a fin de evitar la interferencia con el cableado de las bolsas de aire. NO ponga el radio porttil sobre el rea de la bolsa de aire ni sobre la zona de despliegue de esta. Las bolsas de aire se inflan con gran fuerza. Si se pone un radio en el rea de despliegue de la bolsa de aire y esta se infla, es posible que el radio salga disparado con gran fuerza y cause lesiones graves a los ocupantes del vehculo. 9 Espaol

(Latinoamrica) 6881095C98_SafetyP.book Page 10 Wednesday, March 4, 2015 2:35 PM Advertencias sobre el funcionamiento (continuacin) ADVERTENCIA Atmsferas potencialmente explosivas

(El trmino atmsferas explosivas se refiere a lugares clasificados como peligrosos que pueden contener gases, vapores o polvos peligrosos). Apague el radio antes de ingresar a un rea con una atmsfera potencialmente explosiva, a menos que sea un tipo de radio porttil clasificado especficamente para el uso en tales reas como Intrnsecamente seguro (por ejemplo, aprobado por Factory Mutual, CSA, UL, ATEX o IECEx). NO retire, instale ni cargue bateras en estas reas. Las chispas en ambientes potencialmente explosivos pueden desencadenar una explosin o un incendio, y ocasionar lesiones o incluso la muerte. Entre los ambientes potencialmente explosivos mencionados anteriormente, se encuentran las reas con combustible, por ejemplo, debajo de la cubierta de barcos; instalaciones de transferencia o almacenamiento de combustible y productos qumicos; y reas donde el aire contiene productos qumicos o partculas tales como granos, polvos o polvos metlicos. En las reas con atmsferas potencialmente explosivas generalmente hay seales de precaucin, aunque no siempre es as. Detonadores y reas de explosivos Para evitar posibles interferencias con operaciones de voladuras, apague el radio cuando se encuentre cerca de detonadores elctricos, en un rea de explosivos o en reas donde se encuentre el siguiente aviso: Apague el radio de dos vas. Respete todos los carteles y las instrucciones. Espaol

(Latinoamrica) 10 6881095C98_SafetyP.book Page 11 Wednesday, March 4, 2015 2:35 PM Precauciones sobre el funcionamiento

!

Precaucin Antenas NO use ningn radio porttil que tenga la antena daada. Si una antena daada toca la piel, puede causar una pequea quemadura. Advertencias sobre el funcionamiento Recomendaciones para el uso de las bateras La mayora de los problemas con las bateras surgen debido a su manipulacin inadecuada. Siga estas recomendaciones generales para evitar lesiones y daos. QU SE DEBE HACER Manipule con cuidado las bateras cargadas, especialmente cuando se lleven dentro de un bolsillo, bolso o en algn otro contenedor con objetos metlicos. Cargue la batera con un cargador de bateras aprobado por Motorola. Puede que la carga de la batera en un equipo que no sea de Motorola disminuya el rendimiento y provoque daos a esta. Utilice la batera conforme a su clasificacin de proteccin (IP) contra polvo y agua. Consulte la gua del usuario y la hoja de especificaciones del producto para obtener ms informacin acerca de los entornos operativos pertinentes. 11 Espaol

(Latinoamrica) 6881095C98_SafetyP.book Page 12 Wednesday, March 4, 2015 2:35 PM Precauciones sobre el funcionamiento (continuacin)

!

Precaucin Recomendaciones para el uso de las bateras

(continuacin) QU NO SE DEBE HACER No arroje la batera al fuego. No cambie la batera en un rea designada como Atmsfera peligrosa. Las chispas originadas en atmsferas potencialmente explosivas pueden provocar una explosin o un incendio. No desarme, rompa, perfore, triture ni intente cambiar de ningn otro modo la forma de la batera. No intente secar una batera mojada o hmeda con un electrodomstico o una fuente de calor externa, como un secador de pelo o un horno microondas. Si el rea de contacto de la batera del radio se sumergi en el agua, seque y limpie los contactos de esta antes de colocarla. No permita que materiales conductores como joyas, llaves o cadenas hagan contacto con los terminales expuestos de la batera, ya que dichos materiales pueden cerrar un circuito elctrico o generar cortocircuito y calentarse como consecuencia. Espaol

(Latinoamrica) 12 6881095C98_SafetyP.book Page 13 Wednesday, March 4, 2015 2:35 PM Informacin del radio para lugares peligrosos La unidad con aprobacin para lugares peligrosos se refiere a un producto que se ha aprobado para su uso en lugares peligrosos por parte de una agencia de aprobacin (por ejemplo, FM Approvals, CSA, UL, ATEX, o IECEx) y certifica que un producto particular cumple con las normas aplicables de la agencia para lugares peligrosos. Los radios porttiles que se han aprobado para lugares peligrosos tendrn una etiqueta de aprobacin adherida a ellos para identificarlos como aprobados para atmsferas peligrosas especificadas. Esta etiqueta especifica la clase, la divisin o el grupo de los lugares peligrosos junto con el nmero de pieza de la batera que se debe usar con el radio aprobado. Precauciones sobre el funcionamiento del equipo del radio en lugares peligrosos

!

NO haga funcionar el equipo para comunicaciones de radio en atmsferas peligrosas, a menos que se trate de un tipo especialmente calificado (por ejemplo, aprobado por FM, UL, CSA, ATEX o IECEx). El uso de una unidad no aprobada puede provocar una situacin poco segura. Precaucin NO haga funcionar la unidad de radio que se ha aprobado para el uso en lugares peligrosos si presenta daos fsicos (por ejemplo, una carcasa rota). Esto podra provocar una situacin poco segura. NO reemplace ni cargue las bateras en una atmsfera peligrosa. Mientras se instalan o se quitan las bateras, pueden producirse chispas en el contacto. NO utilice el radio en lugares peligrosos distintos a los que especifica la clasificacin permitida. 13 Espaol

(Latinoamrica) 6881095C98_SafetyP.book Page 14 Wednesday, March 4, 2015 2:35 PM Los radios se deben enviar desde una instalacin de fabricacin de Motorola con el diseo y la etiqueta que indique que estn aprobados para lugares peligrosos

(aprobado por FM, UL, CSA, ATEX, IECEx). Una vez que se hayan enviado los radios a terreno, no se actualizarn para alcanzar la capacidad ni se los etiquetar. Las modificaciones cambian la configuracin del diseo calificado y aprobado del hardware de la unidad. Solo el fabricante del producto original puede realizar modificaciones. Para obtener ms informacin acerca de las advertencias e instrucciones para el uso seguro de los radios en lugares peligrosos, consulte el manual de seguridad para la clasificacin de lugares peligrosos. Espaol

(Latinoamrica) 14 6881095C98_SafetyP.book Page 15 Wednesday, March 4, 2015 2:35 PM Notas 15 Espaol

(Latinoamrica) 6881095C98_SafetyP.book Page 16 Wednesday, March 4, 2015 2:35 PM Notas Espaol

(Latinoamrica) 16 6881095C98_SafetyP.book Page 17 Wednesday, March 4, 2015 2:35 PM Notas 17 Espaol

(Latinoamrica)

 

 

 

 

 

 

 

 

 

 

FCC ID: AZ489FT4920 April 7, 2020 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification for Certification of Transmitter with FCC ID: AZ489FT4920. Dear Sir/Madam:

This transmitter is designed to operate in the following frequency ranges:

Band/Mode UHF Frequency ranges 450-520 MHz FCC rule parts 90 To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Motorola Solutions is requesting that the FCC lists the above applicable frequencies range under FCC Rule Parts 90 on the FCC Grant. For the FCCs Rule Parts 90 applications, this radio is used in systems by Federal and Public Safety agencies including Police, Fire, and Emergency Medical Services, etc. as indicated in the table below. Equipment programming is the responsibility of Authorized Service Personnel. Also, the radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Per the FCCs KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that its a violation of the FCC Rules if this device operates on unauthorized frequencies. Federal Other Regions Frequency Range

(MHz) 450-454 454-456 456-460 460-462.5375 462.5375-462.7375*

462.7375-467.5375 467.5375-467.7375 467.7375-470 470-512 512-520 Part 90 x x x x x x x x x x

*Canada Please contact me if you required any additional information. Sincerely, Deanna Zakharia Regulatory Compliance Manager Email : Deanna.zakharia@motorolasolutions.com _______________________________________________________________________________________________ Motorola Solutions Inc. 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322 EXHIBIT 13C

 

 

FCC ID: AZ489FT4920 Date: April 7, 2020 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Class 2 Permissive Change to FCC Authorized Transceiver with FCC ID: AZ489FT4920 Dear Sir/Madam, A Class 2 permissive change is requested for the subject transceiver which is marketed in the United States and elsewhere. A. DESCRIPTION OF PRODUCT CHANGES:

Four (4) New Battery revisions were added into the radio family due to End of Life (EOL) of parts and design optimization purposes. Battery Kit No Descriptions BATT IMPRES LIION IP67 2350T BATT IMPRES LIION IP68 2800T BATT IMPRES LIION IP68 2100T BATTERY PACK,BATT IMPRES LIION 2000T PMNN4424B PMNN4448B PMNN4491C NNTN8128C B. PERFORMANCE DIFFERENCES:

SAR degradation is observed in EME compared to the original filing but still within the FCC limits. No EMC Testing is required. C. CONCLUSION:

This radio continues to meet all FCC emissions requirements for which authorization was granted. However, SAR degradation is observed in EME compared to the original filing but still meet requirements of a Class-2 Permissive Change. Sincerely, Deanna Zakharia Regulatory Compliance Manager E-mail : Deanna.zakharia@motorolasolutions.com ___________________________________________________________________________________________________________ Motorola Solutions Inc. 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322 EXHIBIT 13A

 

 

Applicant: Motorola Solutions Inc FCC ID: AZ489FT4920 2.1 EXHIBIT 2 Statement of Certification

(Pursuant to FCC Part 2.907, 2.908) Statement of Certification Transceiver type described herein (AZ489FT4920) is in compliance with all applicable parts of the FCC rules. This device is P25 Compliant as well which meets FCC Part 90.548 and RSS 119 Section 5.11 as declared in exhibit 12. Each unit manufactured, imported, or marketed will conform to the samples tested herein, within the statistical variations that can be expected due to high volume production and test measurement error. NAME: Suhaifuddin Wahid SIGNATURE:

DATE: 3 April 2020 TITLE: Engineering Manager EXHIBIT 2 SHEET 1 OF 1