FCC ID: AZ489FT5846 iDEN i870, WiDEN, MOTOtalk, and BT

 

Hearing Aid Compatibility Hearing Aid Compatibility When some mobile phones are used with certain hearing devices (including hearing aids andcochlear implants), users may detect a noise which can interfere with the effectiveness of the hearing device. Some hearing devices are more immune than others to this interference noise, and mobile phones can also vary in the amount of interference noise they may generate at any given time. ANSI standard C63.19 was developed to provide a standardized means of measuring both mobile phone and hearing devices to determine usability rating categories for both. Ratings have been developed for mobile phones to assist hearing device users find phones that may be compatible with their particular hearing device. Not all mobile phones are rated for compatibility with hearing devices, but mobile phones that are rated should have the rating available. This rating may depend on the position of a retractable antenna. 155 Results will vary depending on the users hearing device and individual type and degree of hearing loss. If a hearing device is particularly vulnerable to interference noise, even a mobile phone with a higher rating may still cause unacceptable noise levels in the hearing device. Evaluate your personal needs by trying out the mobile phone with your hearing device. M Rating: Mobile phones rated M3 or M4 meet FCC requirements for hearing aid compatibility and are likely to generate less interference to hearing devices than phones that are not labeled. (M4 is the better or higher of the two ratings.)

"T" Rating: Mobile phones rated T3 or T4 meet FCC requirements for compatibility with telecoil-type ("T Switch" or "Telephone Switch") hearing devices and are likely to be more usable with such hearing devices than unrated phones.

(T4 is the "better" or higher of the two ratings.) Hearing devices may also be measured for immunity to interference noise from mobile phones. In some cases, hearing devices can be modified or hardened to improve operation with a mobile phone. Your hearing device manufacturer or hearing health professional may help you improve the interaction of your mobile phone and hearing device. Not all hearing devices are rated for compatibility with mobile phones, but hearing devices that are rated should have the rating available. Be sure to evaluate your personal needs by trying out this mobile phone with your specific hearing device, using both antenna positions if equipped with a retractable antenna. More information about hearing aid compatibility may be found at:

http://commerce.motorola.com/consumer/QWhtml/

accessibility/default.html, www.fcc.gov, www.fda.gov, and www.accesswireless.org. 156

 

 

Motorola iDEN Digital Multi-service Data-capable Phone i870 Phone Users Guide DRAFT

@NNTN6539A@

NNTN6539A IMPORTANT NOTICE: PLEASE READ PRIOR TO USING YOUR PHONE The SIM card provided in this kit is intended for use with the phone provided in this package. Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series. For more information on SIM card compatibility, go to www.motorola.com/iden/support. Defects or damage to your Motorola phone that result from the use of non-Motorola branded or certified Accessories, including but not limited to replacement housings and or other peripheral accessories, are excluded from warranty coverage. Please refer to the text of Motorola's Limited One Year warranty located in this users guide for complete details. Contents Getting Started........................................... 1 Locating Your SIM Card....................................3 Battery...............................................................4 Activating Service..............................................7 Powering On and Off.........................................7 Phone Programming .........................................8 Finding Your Phone Number.............................9 Phone Basics ....................................................9 Using the Memory Card ..................................14 SIM Card Security ...........................................17 Antenna ...........................................................22 Accessories.....................................................22 For More Information.......................................22 Making Calls............................................. 23 Phone Calls.....................................................23 Private Calls ....................................................23 Receiving Calls................................................24 Choosing a Number to Call .............................25 Missed Phone Calls.........................................26 Using Speakerphone.......................................26 Using Mute ......................................................27 Making Emergency Phone Calls .....................27 MOTOtalkTM .......................................................... 28 Switching to MOTOtalk ...................................28 Exiting MOTOtalk ............................................29 Channels and Codes.......................................29 Private MOTOtalk Calls...................................31 Making Emergency Calls while in MOTOtalkTM Mode...........................................................32 Setup Options .................................................32 Call Alerts..................................................34 Sending Call Alerts..........................................34 Receiving Call Alerts .......................................34 Using the Call Alert Queue..............................34 Recent Calls ..............................................36 Calls and Call Alerts........................................36 My Info From Other Phones............................36 Contact Information From Other Phones ........37 Viewing the Recent Calls List..........................37 Storing Items to Contacts................................38 i Deleting Items .................................................39 Making Calls From the Recent Calls List ........39 Contacts ................................................... 41 Accessing Contacts.........................................42 Creating Entries...............................................42 Storing Numbers Faster ..................................44 Editing Entries .................................................45 Viewing Entries................................................45 Deleting Entries ...............................................47 Checking Capacity ..........................................48 Creating Pauses and Waits.............................48 International Numbers .....................................48 Making Calls From Contacts ...........................49 Accessing Contacts with GSM Phones...........49 Call Forwarding........................................ 51 Forwarding All Calls ........................................51 Turning Off Call Forwarding ............................52 Forwarding Missed Calls .................................52 Viewing Call Forwarding Settings....................53 ii Advanced Calling Features .....................54 Call Waiting .....................................................54 Switching Between Calls.................................54 Putting a Call on Hold .....................................55 Calling 2 People ..............................................55 Creating Pauses and Waits While Dialing.......56 Making International Calls...............................56 One Touch PTT...............................................56 Quick PTT .......................................................57 Setting Flip Actions .........................................58 Call Timers ......................................................58 Using Your Phone as a Modem ......................59 Making TTY Calls............................................60 Group Calls and Selective Dynamic Group Calls .......................................................63 Group Calls .....................................................63 Selective Dynamic Group (SDG) Calls ...........65 Memo .........................................................70 Ring Tones ................................................71 Setting Your Phone to Vibrate.........................71 Ring and Vibrate .............................................72 Assigning Ring Tones to Contacts ..................72 Viewing Ring Tone Assignments.....................72 Downloading More Ring Tones .......................73 About DRM Ring Tones ..................................73 Managing Memory...........................................73 Deleting Custom Ring Tones ..........................73 Entering Text............................................ 75 Using Word Mode............................................75 Special Function Keys.....................................76 Messages ................................................. 78 Message Notifications .....................................78 Message Center ..............................................79 Voice Mail Messages ............................... 80 Receiving a Message......................................80 Accessing Voice Mail from the Message Center ...................................80 Sending Unanswered Calls to Voice Mail .......80 MOSMS Messages ................................... 81 Setting Up........................................................81 Receiving a Message......................................81 Reading from the Message Center .................82 Creating and Sending Messages ....................82 Sorting Messages ...........................................85 Managing Memory ..........................................85 Camera ......................................................86 Accessing the Camera ....................................86 Taking Pictures ...............................................86 More Actions for Captured Pictures ................88 Recording Videos............................................89 Changing Storage Preference.........................89 Accessing the Media Center ...........................90 Customizing the Camera.................................90 Managing Memory ..........................................90 Media Center.............................................92 Viewing the Media Center ...............................93 Forward Locked Items.....................................94 DRM Items ......................................................95 Pictures ...........................................................95 Videos .............................................................96 Audio Recordings............................................97 Renaming Items ..............................................97 iii Locking Items ..................................................98 Deleting Items .................................................98 Accessing the Camera ....................................99 Copying and Moving Items..............................99 Changing Storage Preference.........................99 Accessing the Audio Player...........................100 Managing Memory.........................................100 Audio Player........................................... 101 Playing Audio Files with the Flip Closed .......101 Playing Audio Files with the Flip Open..........102 How Your Audio Files Are Organized............103 Searching By First Letter...............................104 Playing a List, Repeat, and Shuffle ...............104 Working with Playlists....................................105 Deleting Audio Files ......................................108 DRM Items ....................................................108 Setting Audio and Visual Options..................109 Digital Rights Management................... 110 Installing Items ..............................................110 Understanding DRM Status Icons .................110 Sharing Items ................................................110 iv Managing DRM Items ...................................111 Using Send via PTT................................114 Sending a Picture..........................................114 Receiving a Picture .......................................115 Sending My Info and Contact Information.....116 My Info.....................................................119 Viewing My Info.............................................119 Editing My Info ..............................................119 Setting Sending Options ...............................120 Datebook .................................................121 Viewing Datebook .........................................121 Creating Events.............................................122 Editing Events ...............................................124 Deleting Events .............................................124 Receiving Reminders ....................................125 Making Calls From Datebook and Datebook Reminders ................................................125 Customizing Datebook Setup........................126 Java Applications ...................................128 Installing Applications....................................128 Running Applications.....................................128 Suspending Applications ...............................128 Resuming Applications..................................129 Ending Applications.......................................129 Downloading Applications .............................129 Deleting Applications.....................................130 Managing Memory.........................................130 Shortcuts on the Main Menu .........................130 Java Applications and GPS Enabled.............131 Bluetooth ............................................. 134 Understanding Bluetooth Access Settings ..134 Setting Your Phone for Bluetooth..................... 134 Accessing Bluetooth ...................................135 Making a Bluetooth Connection ..................136 Setting Device Details ...................................138 Sending Contacts, Datebook Events and Pictures.....................................................139 Receiving Items.............................................140 GPS Enabled .......................................... 142 IMPORTANT: Things to Keep in Mind ..........142 Making an Emergency Call ...........................144 Viewing Your Approximate Location .............145 Enhancing GPS Performance .......................146 Updating Satellite Almanac Data ..................147 Setting Privacy Options.................................148 Using GPS with Map Software......................149 Voice Records ........................................152 Viewing Voice Records .................................152 Creating Voice Records ................................152 Playing Voice Records ..................................153 Labeling Voice Records ................................153 Locking Voice Records .................................153 Deleting Voice Records.................................154 Managing Memory ........................................154 Customizing Your Phone.......................155 Setting the Volume........................................155 Setting Your Phone to Vibrate.......................155 Changing the Look of Your Phone ................155 Temporarily Turning Off Transmissions ........157 Using Settings ...............................................158 v Profiles ................................................... 162 Viewing Profiles.............................................162 Switching Profiles ..........................................162 How Changing Settings Affects Profiles........162 Temporary Profiles ........................................163 Creating Profiles............................................164 Editing Profiles ..............................................164 Deleting Profiles ............................................164 Setting Call Filtering ......................................165 Shortcuts ................................................ 167 Creating a Shortcut .......................................167 Using a Shortcut............................................167 Editing a Shortcut ..........................................168 Deleting Shortcuts .........................................168 Using a Headset..................................... 169 Using a Bluetooth Headset............................169 Attaching a Headset ......................................169 Using a Remote PTT Button .........................169 Understanding Status Messages ..........171 Safety and General Information ............173 RF Operational Characteristics .....................173 Portable Radio Product Operation and EME Exposure...................................................173 Electromagnetic Interference/Compatibility...176 Medical Devices ............................................176 Operational Warnings ...................................177 Operational Cautions ....................................178 Accessory Safety Information .......................179 Hearing Aid Compatibility .....................181 MOTOROLA LIMITED WARRANTY .......183 Limited Warranty Motorola Communication Products

(International)......................................187 Patent and Trademark Information.......191 Index ........................................................192 Driving Safety Tips.................................200 vi DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product:

Product Name: i870 Model Number: H85XAH6RR5AN Conforms to the following regulations:

FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. vii Getting Started camera lens spotlight volume controls Push-To-Talk

(PTT) button audio jack 1 retractable antenna quick flip button mirror external display audio player keys speaker

(in back) memory card slot power button light sensor camera key microphone accessory connector p Power button. Navigation key press the arrows to scroll through menus and lists. O OK key selects highlighted item;

m answers calls. Menu key accesses context-sensitive menus. A Option key selects the option appearing above it on the display. s Send key places phone calls. e End key ends phone calls; returns to idle screen. t Acts like s when the flip is closed; turns speaker on; used with voice names and voice records. Acts like e when the flip is closed;

accesses recent calls; sends incoming calls to voice mail. c Camera key accesses camera;

captures picture. 2 Getting Started y Accesses the audio player when the flip is closed; plays audio files; pauses audio files. z When an audio file is playing, fast-forwards and skips to the next audio file. x When an audio file is playing, rewinds and skips to the previous audio file. To start using your i870 phone:

Make sure your SIM card is in place.

Charge the battery.

Activate your service.

Enable over-the-air security if you are prompted to. 3 Locating Your SIM Card Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your phone, underneath the battery. SIM card If your SIM card is not in the SIM card holder, it may be in the box your phone came in, attached to a piece of plastic about the size of a credit card. If this is the case, carefully detach your SIM card from the surrounding plastic and insert it as described in Inserting Your SIM Card on page 19. If there is no SIM card in your phone or the box, contact your service provider. 3 Allow the battery door to pop up, slide it forward, and remove it from the back of your phone. Battery Battery Removing the Battery Door 1 Make sure the phone is powered off. See Powering On and Off on page 7. 2 Slide the release button back until it releases the battery door. release button Inserting the Battery Your phone comes with a High Performance Lithium Ion Battery. 1 Remove the battery door. 2 Insert the battery into the battery area. Press the battery down to secure it. 4 Getting Started 3 Replace the battery door and press it gently until you hear a click. 2 Open the connector cover. Charging the Battery Your phone comes with a rapid travel charger. 1 Plug the charger into an electrical outlet. 3 Plug the other end of the charger into the accessory connector. connector cover 5 Charger Attached or Device Attached appears on the internal display. Tip: To remove the charger from the accessory connector: Press the buttons on the sides of the plug. Pull the plug straight out. 4 If you have purchased optional batteries or chargers, see Charging Times. Charging Times See your battery and charger to determine the appropriate charging time. Battery High Performance Maximum Capacity Charger Rapid 2 hours Mid-Rate 4 hours 3.5 hours 7.5 hours For best results, charge the batteries within the temperature range of 50F to 104F (10C to 40C). Prolonged charging is not recommended. Battery Removing the Battery 1 With the phone powered off, remove the battery door. 2 Remove the battery by pushing it toward the antenna and lifting it out. Battery Use and Maintenance

The Motorola iDEN Approved Lithium Ion chargers provide optimum performance. Other chargers may not fully charge the iDEN Lithium Ion battery or may yield a reduced number of lifetime charge cycles.

Extreme temperatures degrade battery performance. Do not store the battery where temperatures exceed 140F (60C) or fall below 4F (-20C). 6 Note: When powering on, if you press p for more than 5 seconds, you will turn off calls and other transmissions. See Temporarily Turning Off Transmissions on page 157. To power your phone off:

1 Open the flip. 2 Press and hold p. When You Power On For the First Time If the Enter SIM PIN Code screen appears, enter your SIM PIN. See Entering the PIN on page 17. Press A under Ok. When you receive your phone, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card (see Changing the PIN on page 17). Getting Started Lithium Ion batteries have a self discharge rate and without use, lose about 1% of their charge per day.

The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity. Activating Service The first time you power on your phone, you must be in your local calling area. This activates your service. Powering On and Off The first time you power your phone on, a screen may appear asking you to update your browser information. This means you must enable security. To power your phone on:

1 Open the flip. Tip: Press the flip open button to open the flip easily. 2 Press p. 7

As your phone connects to the network, you will see a welcome message and a connecting message. When the idle screen appears, the phone is ready to use. Enabling Over-the-Air Security If you are set up to receive over-the-air programming from your service provider, you must enable security the first time you power on your phone or within 10 days of first activation of your phone:

1 When you power on your phone for the first time, after the idle screen appears, you will be prompted to select Ok to update your browser information. Phone Programming 2 Press A under Ok. 3 You are prompted to enable security. Press A under Yes. A series of screens appears. If you subscribe to your service providers plan, your home page appears. 4 Press e to return to the idle screen. Phone Programming Within 24 hours of enabling security, you may receive an alert notification containing your Private ID and Talkgroup lists for Private calls. To accept programming:

1 When you receive an alert notification saying New Browser Message - Receive Programming Info, press O or press A under Goto. 2 You are prompted to accept changes to your lists. Press O or press A under Ok. 3 If you are prompted again to accept changes to your lists, press O or press A under Ok. 4 A confirmation screen displays. Press O or press A under Ok. 5 Press e to return to the idle screen. 8 Getting Started Finding Your Phone Number My Info lets you view your phone number, Private ID, and other phone information:

1 Press m to access the main menu. 2 Scroll to My Info. 3 Press O. 4 Scroll to see your information. Line 1 and Line 2 are your phone numbers. Private is your Private ID, the number that others use to contact you using Private service. These numbers appear when you receive your alert notification after enabling security on your phone. See My Info on page 119 for more information about this feature. Phone Basics Quick Flip The quick flip button located on the upper right corner of your phone enables you to quickly open the flip by pushing the button. Display Any time your phone is powered on, the display provides you with information and options. 9 The external display shows a shortened version of the internal display. To see more information, open the flip. status icons text area menu icon display options The screen shown is the idle screen. The text that appears on your idle screen depends on your service provider. The idle screen appears when your phone is on, but not engaged in any activity. Text Area This area displays menus, messages, names, phone numbers, and other information. Display Options Two display options appear at the bottom of most screens. You select a display option by pressing the option key below it. Menus and Lists Your phones features are arranged in menus, submenus, and lists. To access the items in a menu or list, scroll using the navigation key at the top of your keypad. This key lets you scroll up, down, left, or right. Holding down the appropriate part of the navigation key speeds up scrolling. In this guide, this symbol > tells you to select a menu or list item. For example, Settings >

Security means:

1 Scroll to Settings on the main menu. 2 Press O to see the Settings screen. 3 Scroll to Security. 4 Press O to see the Security screen. OK Key Pressing O:

Selects the highlighted menu item or list item

Sets options Phone Basics

Confirms actions

Places and answer calls Menu Key Many features provide context-sensitive menus that let you access related features and actions. This icon S appears any time a context-sensitive menu is available. Press m to access the menu. Main Menu All your phones features can be accessed through the main menu. You can set the main menu to appear as a list or as large icons. a Browser Browse the Web. q Java Apps b Settings c VoiceRecord Java applications on your phone. See page 128. Customize your phone. See page 155. Record and play audio messages. See page 152. 10 Getting Started d Contacts e Messages f Call Forward o Datebook g Memo h Call Timers i Recent Calls s Shortcuts j My Info 11 Create, view, store, edit Contacts and SDG lists*. See page 41.

* Selective Dynamic Group Calling

(SDGC) may not be offered by your service provider. Access messages. See page 78. Set call forwarding options. See page 51. Schedule appointments. See page 121. Store a number to access later. See page 70. Phone usage information. See page 58. Lists recent calls. See page 36. Create shortcuts to screens. See page 167. View personal phone information, including phone number and Private ID. See page 9. p Profiles k Call Alert B Bluetooth l GPS m Ring Tones M MOTOtalk C Camera m Media Center Groups of settings you apply together. See page 162. Lists call alerts. See page 34. Connect to a device with Bluetooth. See page 134. Find your approximate geographical location. See page 142. Assign ring tones and turn ringer off. See page 71. Launch/Exit MOTOtalk.*

Access MOTOtalk Setup and Help. See page 28.

* MOTOtalk may not be offered by your service provider. Access camera and take pictures. See page 86. Access stored pictures and audio recordings. See page 92.

* Audio Player Q Quick PTT Access the MP3 audio player. See page 101. Access* any Private IDs and SDG lists on your phone. See page 57.

* Quick PTT may not be offered by your service provider. Quick Access to Main Menu Items Each arrow in the navigation key and O can be used to access a main menu item from the idle screen. Each of these keys is assigned to a main menu item when you receive your phone. To assign different main menu items, see Personalize Features on page 159. Phone Basics Status Icons Status icons appear at the top of the display. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features. abcd efgd Battery Strength A fuller battery indicates a greater charge. o p q r s 6 A B C S Signal Strength More bars next to the antenna indicate a stronger signal. No Service Your phone is without service. You cannot make or receive any type of call. Phone In Use Your phone is active on a phone call. Private In Use Your phone is active on a Private call. Talkgroup In Use Your phone is active on a group call. SDG Call In Use Your phone is active on a SDG call.*

* Selective Dynamic Group Calling (SDGC) may not be offered by your service provider. 12 Getting Started Active Phone Line 1 indicates phone line 1 is ready to make calls;

2 indicates phone line 2 is ready to make calls. Bluetooth In Use Your phone is using Bluetooth. If this icon is blinking, then your phone is in discoverable mode. If this icon is static, your phone is active in a Bluetooth connection. Call Forward Your phone is set to forward calls. See page 51. Ringer Off Your phone is set to not ring. See page 71. Speaker Off Sounds associated with Private calls and group calls are set to come through the earpiece rather than through the speaker. Messages You have one or more messages. See page 78. Internet You are ready to browse the internet. 1 2 B G J H K I L QRM u w xT yz DE 13 9 4 3 5 Y Z 7 N O t Transmitters Your phone is set not to receive calls and other transmissions. See Temporarily Turning Off Transmissions on page 157. Audio Player The audio player is active. Packet Data You are ready to transfer packet data or are transferring packet data. See page 59. Hearing Aid Your phone is set to place calls through the earpiece. TTY You are ready to use your phone to make calls using a teletypewriter device. See page 60. Roaming You are using your phone outside your carrier's network. Entering Numbers From the Keypad To enter numbers at the idle screen or any screen that requires you to enter numbers, press the numbers on the keypad. If you make a mistake:

To clear a digit, press A under Delete.

To clear all digits, press and hold A under Delete.

To insert or delete a digit anywhere in the string of digits you have entered, scroll left or right.

To cancel, press e. Using the Memory Card Your i870 phone comes with a memory card. A memory card is a removable flash memory card that you can use to store pictures, videos, and audio files. The audio player on your i870 phone works with the memory card and supports the following file formats:

MP3 version Bit Rates

(kbits/sec) Sampling Rates

(KHz) Channel mode MPEG-1, MPEG-2, MPEG-2.5. 32, 40, 48, 56, 64, 80, 96, 112, 128,160, 192. 8, 11.025, 12,16, 22.05, 24, 32, 44.1, 48. Stereo and Mono. Using the Memory Card Understanding the Folder Structure When you first insert the memory card into your phone, three folders are created: Audio, Images, and Video. In order to view files stored on the memory card, you must store the given file in its corresponding format folder: audio files to the Audio folder, pictures to the Images folder, and videos to the Video folder. Filename Rules When naming files stored on the memory card, the following rules apply:

The filename can only contain ASCII characters.

The filename can be up to 32 characters long, including the file extension. Supported Formats To view files stored on the memory card, the files must be in the following formats:

File Type Audio Task Playback Formats MIDI (FM-Midi, Type-0, 16 Polyphony, SP-Midi compliant), WAV (8 kHz, 8-bit Mono PCM Canonical Format), MP3, AMR, AU 14

Pictures sent via Bluetooth Setting Your Storage Preference You can choose whether media items are saved to your phones memory or to the memory card. To set the media storage option in Settings:

1 From the main menu, select Settings >

Advanced > Memory Card > Store Media. 2 Select On Phone to set your phone to save media items to the phones memory. -or-

Select Prefer On Card to set your phone to save media items to the memory card, if it is available. If the memory card is not available, media items are saved to your phones memory. Inserting the Memory Card 1 Open the memory card slot cover. Getting Started Images View Video Capture Playback Record GIF (GIF89A and GIF87A), JPEG, WBMP, PNG JPG H.263, MPEG4 H.263 For more information about supported audio formats, see Using the Memory Card on page 14. Accessing Files on the Memory Card When you insert the memory card into your phone, you may have already saved files to the memory card using another device. Many types of pictures, videos, and audio files stored on the memory card can be viewed or played using your phones media center. MP3 audio files stored on the memory card can be played using your phones audio player. Saving Files to the Memory Card When the memory card is in your phone, you can save these media items to it:

Pictures received in Send via PTT calls

Pictures and videos taken with your phones camera 15 2 Slide in the memory card. 2 Open the memory card slot cover. Using the Memory Card 3 Your phone may prompt you to use the memory card to store new media items, or to go to the audio player, camera, or media center. Respond to the prompt now. 4 Close the memory card slot cover. Removing the Memory Card Important: Do not remove the memory card before selecting the Remove Card option. Removing the memory card before selecting the Remove Card option could result in loss of data. 1 From the main menu, select Settings >

Advanced > Memory Card > Remove Card. 3 Push the memory card to release it from the slot. 4 Pull out the memory card. 5 Close the memory card slot cover. Note: If you select the Memory Card > Remove Card option but do not remove the memory card, you cannot use the memory card until you remove it and insert it again. 16 Getting Started SIM Card Security Your SIM card protects your personal information. The SIM card stores all your Contacts information. Since this information is stored on your SIM card, not in your phone, you can remove the information by removing your SIM card. Note: Except for making emergency calls, your phone will not function without the SIM card. To prevent unauthorized use of your phone, your SIM card may be protected by a PIN that you enter each time the phone is powered on. You can change the PIN or turn off the requirement that it be entered. Entering the PIN You may be required to enter a SIM PIN when you first use your phone. When you receive your phone, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card. 17 Important: If you enter your PIN incorrectly 3 times, your SIM card is blocked. To unblock your SIM card, you must contact your service provider. See Unblocking the PIN on page 18. 1 When the Enter SIM PIN Code screen appears, enter your SIM PIN. An asterisk appears for each character entered. 2 Press A under Ok. Changing the PIN 1 From the main menu, select Settings >

Security > Change Passwords > SIM PIN. 2 At the Enter Old SIM PIN screen, enter the current SIM PIN. 3 Press A under Ok. 4 At the Enter New SIM PIN screen, enter the new 4- to 8-digit SIM PIN. 5 Press A under Ok. 6 At the Re-enter New SIM PIN screen, re-enter the new SIM PIN to confirm. 7 Press A under Ok. Turning the PIN Requirement On and Off When the SIM PIN requirement is on, you are prompted to enter your PIN each time you turn on your phone. Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency calls. When the PIN requirement is off, your phone can be used without entering a PIN. Important: When the SIM PIN requirement is off, the personal data on your SIM card is not protected. Anyone can use your phone and access your personal data. 1 From the main menu, select Settings >

Security > SIM PIN. 2 Select On or Off. 3 Enter the current SIM PIN. 4 Press A under Ok. Unblocking the PIN If you enter your PIN incorrectly 3 times, your SIM card is blocked. To unblock your SIM card, you must contact your service provider to get a PIN Unblock Code (PUK). SIM Card Security Important: If you unsuccessfully enter the PUK code 10 times, your SIM card is permanently blocked and must be replaced. If this happens, all data is lost. You will get a message to contact your service provider. Except for making emergency calls, your phone will not function with a blocked SIM card. To unblock the PIN:

1 Press * # m 1. 2 At your service provider representatives request, provide the information needed to give you a PUK code. 3 Select Unblock PIN. 4 Enter the PUK code. 5 Enter a new 4- to 8-digit SIM PIN. 6 Re-enter your SIM PIN. If you entered the codes properly, SIM Unlocked appears on the display. 18

Datebook events

Options set using the Personalize menu Inserting Your SIM Card 1 With your phone powered off, remove the battery door and battery. 2 Slide the latch away from the SIM card holder. latch Getting Started Inserting and Removing Your SIM Card Important: Do not touch the gold-colored areas of your SIM card. Switching SIM Cards Moving your SIM card from one phone to another moves all your Contacts information, but erases other information. If you remove your SIM card and use it with another phone, or use another SIM card with your phone, the following information is erased:

The recent calls list

Call forwarding settings

Net alerts

MOSMS drafts, outbox messages, and customized quick notes Information stored in Memo

Pictures, video, and audio recordings accessible through the media center that are saved in your phones memory, except those that are forward locked. (No items saved to the memory card are erased.) 3 most recent GPS Enabled locations

Voice records

Voice names 19

3 Open the SIM card holder. 5 Close the SIM card holder. SIM Card Security 4 Carefully slide your SIM card into the SIM card holder. 6 Slide the latch toward the SIM card holder. Removing Your SIM Card Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary. 1 With your phone powered off, remove the battery door and battery. 20 Getting Started 2 Slide the latch away from the SIM card holder. 4 Carefully slide your SIM card out of the SIM card holder. latch 3 Open the SIM card holder. 5 Close the SIM card holder. 21 6 Slide the latch toward the SIM card holder. Note: Protect your SIM card as you would any delicate object. Store it carefully. Antenna The retractable antenna on your i870 phone is designed to be extended during calls. To extend the antenna, pull gently on the tip until the antenna is fully extended and clicks into position. When finished with a call, retract the antenna by pushing gently on the tip until the antenna clicks into place. To optimize your phones performance, extend the antenna when you make or receive a call, and avoid touching the antenna with any body part. Antenna Important: Failure to fully extend or retract the antenna until the antenna clicks into place causes severely degraded performance, which may result in missed calls, dropped calls, or garbled audio. Accessories To order accessories, log on to our Web site at www.motorola.com/store/iden or contact your Motorola Authorized Retailer. For More Information If you have questions about your i870 phone, contact your sales representative or your service provider. 22 Making Calls Your i870 phone makes two types of calls: digital cellular phone calls and Private calls. With Private calls, you use your phone as a long-range, digital walkie-talkie. Phone Calls With the Flip Open 1 Enter the number you want to call. 2 To place the call:

Press s. -or-

If you entered the number from the idle screen, press O. 3 To end the call:

Press e. -or-

Close the flip. To end a call by closing the flip, you must have the Flip to End feature turned on (see Setting Flip Actions on page 58). 23 With the Flip Closed You can make phone calls with the flip closed using a voice name or the recent calls list to select the number you want to call. See Using a Voice Name on page 25 and Making Calls From the Recent Calls List on page 39. To end the call, press .. Private Calls 1 If the flip is open, enter the Private ID you want to call. -or-

If the flip is closed, choose the number as you would when making a phone call. 2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound. 3 Release the PTT button to listen. 4 To end the call:

If the flip is closed, press .. -or-

Press e. -or-

Press A under Exit. -or-

Close the flip. A Private call ends automatically if there is no activity on the call for a few seconds. Tip: To let someone know you want to talk to him or her on a Private call, send a call alert. See Call Alerts on page 34. Receiving Calls Phone Calls When you receive a phone call, your phone rings, vibrates, or lights up its backlight. Answering If the flip is closed, press t. -or-

Open the flip. -or-

Press s. -or-

Press O. -or-

Press A under Yes. -or-

Press any number key. To answer a call by opening the flip, you must have the Flip to Ans feature turned on (see Setting Flip Actions on page 58). To answer a call by pressing any number key, you must have the Any Key Ans feature turned on (see Phone Calls Features on page 158). Sending to Voice Mail If the flip is closed, press .. -or-

Receiving Calls Press e. -or-

Press A under No. Ending If the flip is closed, press .. -or-

Press e. -or-

Close the flip. Private Calls When you receive a Private call, your phone emits a chirping sound or vibrates. Answering 1 Wait for the caller to finish speaking. 2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound. 3 Release the PTT button to listen. Ending If the flip is closed, press .. -or-

Press e. -or-

Press A under Exit. -or-

Close the flip. A Private call ends automatically if there is no activity on the call for a few seconds. 24 Making Calls Choosing a Number to Call You can choose the number you want to call in many ways:

Enter the number on the keypad. See Entering Numbers From the Keypad on page 13.

Say a voice name into your phone. See Using a Voice Name.

Use Speed Dial or Turbo Dial to make a phone call. See Using Speed Dial and Turbo Dial on page 26.

Redial the last phone number called. See Redialing the Last Number on page 26.

Select the number from the recent calls list. See Making Calls From the Recent Calls List on page 39.

Select the number from Contacts. See Making Calls From Contacts on page 49.

Select a number stored in Datebook. See Making Calls From Datebook and Datebook Reminders on page 125.

Use One Touch PTT to make a Private call. See One Touch PTT on page 56.

Use the number in Memo. See Memo on page 70. 25

Select the number in a text message you have received. See Receiving a Message on page 81. Using a Voice Name If you have created a voice name in Contacts for the number you want to call, say the voice name into your phone to enter the number. See page 44 for information on voice names. You can use a voice name to enter a number with the flip open or closed. 1 Press and hold t until a prompt appears telling you to say the voice name. 2 Speaking into the microphone, say the voice name assigned to the number you want to call. Your phone plays the name back to you. 3 If you are making a phone call, the call is placed automatically. Tip: To stop a phone call from being completed, press . if the flip is closed or press e. If you are making a Private call or a SDG call, press and hold the PTT button to place the call. Using Speed Dial and Turbo Dial Each phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number. Speed Dial 1 From the idle screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call. 2 Press #. 3 Press s. Turbo Dial From the idle screen, press and hold the Speed Dial number (1 through 9) assigned to the phone number you want to call. Redialing the Last Number Press and hold s to place a call to the last phone number you called. Missed Phone Calls When you miss a call, this icon V and the number of phone calls you have missed appear briefly. Missed Phone Calls With the Flip Open If you want to dismiss the missed call message, press A under Back. -or-

If you want to view the missed call on the recent calls list, press A under View. With the Flip Closed If you want to dismiss the missed call message, press .. If you want to view the missed call on the recent calls list, press . twice. Using Speakerphone Turning on speakerphone makes incoming sound come out of the phones speaker instead of the earpiece. Speakerphone is available whenever you are on an active phone call. With the Flip Open To turn speakerphone on or off:

Press A under Speaker. -or-

Press t. 26 Making Calls With the Flip Closed When you make a call with the flip closed, speakerphone is always on. Opening the flip turns speakerphone off. Using Mute Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call. To turn mute on:

Press A under Mute. While mute is on, Unmute appears as a display option. To turn mute off:

Press A under Unmute. Making Emergency Phone Calls Your phone supports emergency calling. Emergency phone calls can be made even when your SIM card is blocked or not in your phone. Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911. 27 When you make an emergency call, your phones GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. See GPS Enabled on page 142, and particularly IMPORTANT: Things to Keep in Mind on page 142 and Making an Emergency Call on page 144, for more information on the limitations of this feature. Because of the limitations of this feature, always provide your best knowledge of your location to the emergency response center when you make an emergency call. Important: Emergency calls cannot be placed while the keypad is locked. Important: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone. MOTOtalkTM Note: This feature may not be offered by your service provider. With MOTOtalk, you can make and receive 2-way radio calls without network coverage. If you are travelling outside your service provider's coverage area, receiving a poor signal, or otherwise want to temporarily avoid using your service provider's network, you can switch to MOTOtalk and talk with anyone on your code and channel who is within range. Note: Range will vary based on terrain, man-made structures and atmospheric conditions. MOTOtalk lets you:

Use code or private mode operation

Use up to 10 channels

Communicate with standalone MOTOtalk radios Note: You cannot use MOTOtalk with older Family Radio Services products. The following features and main menu items are unavailable while in MOTOtalk:

On-network phone calls

On-network Private calls Switching to MOTOtalk

Data transmission Incoming message notification

Musical ring tones

Call forwarding

Messages

Call Timers

Call alerts

Voice records Switching to MOTOtalk To set your phone to MOTOtalk:

1 From the main menu, scroll to MOTOtalk and press O. 2 Select Go to MOTOtalk. Switching to MOTOtalk Please Wait displays. After a few seconds, the MOTOtalk idle screen displays. When MT Ready displays, you can begin using MOTOtalk. While in MOTOtalk, this icon M displays. 28

MOTOtalkTM Exiting MOTOtalk To switch to network mode:

1 From the MOTOtalk idle screen, press m. 2 Scroll to MT Options and press O. 3 Select Exit MOTOtalk. Tip: You can also exit MOTOtalk from the MOTOtalk idle screen by pressing e for 3 seconds. Switching to Network Please Wait displays. After a few seconds, the network idle screen appears. Talk Range While in MOTOtalk mode, phones should be a minimum of 6 feet apart to maximize performance and improve transmission range. Channels and Codes Your phone has 10 channels and 15 codes. Channels are divided into sets of frequencies. Other parties may be talking on the same channel. Codes minimize interference from other parties when you are sharing the same channel. 29 MOTOtalk opens to the last code and channel used on your phone. You can view the code and channel your phone is currently set to on the MOTOtalk idle screen. For code calls, all parties must be on the same channel and code. For private MOTOtalk calls, the person you are calling must be in MOTOtalk and set to the same channel to receive your call. Note: When making a code call, all parties that are on your code and channel can hear your conversation. Setting Channels and Codes To set a channel:

1 From the MOTOtalk idle screen, press A under Edit. 2 Scroll to Channel. 3 Press A under Edit. 4 Select a channel. 5 When you are finished, press A under Back to return to the MOTOtalk idle screen. To set a code:

1 From the MOTOtalk idle screen, press A under Edit. 2 Scroll to Code. 3 Press A under Edit. 4 Select a code. 5 When you are finished, press A under Back to return to the MOTOtalk idle screen. Making Code Calls To make a code call:

1 From the MOTOtalk idle screen or the channel and code edit screen, press and hold the PTT button. Transmit appears on the first line of display. Begin speaking after your phone emits the MOTOtalk tone. Note: The MOTOtalk tone consists of 4 rapid beeps. 2 Release the PTT button to listen. If you receive an error message:

No one is on your channel or code.

You are out of range. Receiving Code Calls When you receive a code call, Receive will appear on the display. After hearing the MOTOtalk tone, you have 6 seconds to reply before the call times out. To reply to the call, press the PTT button. Channels and Codes Note: An incoming MOTOtalk call can be terminated at any time by pressing e. Receiving All MOTOtalk Calls If you set the code to Receive All, your phone can receive MOTOtalk transmissions from any phone that is set to the same channel, regardless of the code (1-15). When you receive transmissions with the code set to Receive All, the code that the transmission was received on will replace Receive All on the display. Note: You cannot initiate a code call when the code is set to Receive All. To set the code to Receive All:

1 From the MOTOtalk idle screen, press A under Edit. 2 Scroll to Code. 3 Press A under Edit. 4 Select Receive All. 5 When you are finished, press A under Back to return to the MOTOtalk idle screen. To reply to a call with the code set to Receive All:

Press the PTT button. 30 MOTOtalkTM Private MOTOtalk Calls If you want to have a private conversation without other parties listening in, you can make a private MOTOtalk call. The person you are calling must be in MOTOtalk and set to the same channel to receive your call. To make a private MOTOtalk call, enter the Personal Telephone Number (PTN) of the person you are calling. If the PTN is more than 10-digits, enter the last 10-digits of the PTN. If you receive an error message:

The PTN you entered is invalid.

The person that you are trying to reach is in network mode.

The person that you are trying to reach is set to a different channel.

The person that you are trying to reach is out of range. Private Only To set MOTOtalk to ignore code calls, so that you only make or receive private MOTOtalk calls, set your code to Pvt Only. 31 To set the code to Pvt Only:

1 From the MOTOtalk idle screen, press A under Edit. 2 Scroll to Code. 3 Press A under Edit. 4 Select Pvt Only. Making a Private MOTOtalk Call 1 Enter the PTN of the person you want to call on your channel. If the PTN is more than 10-digits, enter the last 10-digits of the PTN. -or-

Scroll to a number or name in Contacts. -or-

Scroll to a number in the recent calls list. 2 Press and hold the PTT button. Begin speaking after your phone emits the MOTOtalk tone. 3 Release the PTT button to listen. The number or name of the person you are calling will appear in the display. Receiving a Private MOTOtalk Call The number or name of the person who is calling will appear in the display. To reply, press the PTT button. Making Emergency Calls while in MOTOtalkTM Mode Ending Code Calls and Private MOTOtalk Calls Code calls and private MOTOtalk calls will end automatically after 6 seconds of inactivity. The MOTOtalk idle screen will display. Note: A private MOTOtalk call can be interrupted during the 6 second idle time by another code call or private call. Making Emergency Calls while in MOTOtalkTM Mode If you attempt to make an Emergency 911 call while in MOTOtalk mode, your phone will automatically exit MOTOtalk mode and attempt to find a network signal. If you are out of network coverage your phone will not be able to make an emergency 911 cellular call until you go back into the network coverage area. You must wait until the phone reconnects to the network before attempting to make an emergency 911 cellular call. Setup Options You can set up MOTOtalk options on the MT Options screen. You can access this screen in both network and MOTOtalk modes. To access setup options:

1 From the main menu, select MOTOtalk. If MOTOtalk is not one of your options, select MT Options. 2 Select Setup. You can set the following MOTOtalk options:

Direct Launch : Launch directly into MOTOtalk when you select MOTOtalk from the main menu.

State Tone : Have an alert sound notify you that you have used MOTOtalk for a specified interval. Using Direct Launch To set your phone to launch MOTOtalk when you select MOTOtalk from the main menu:

1 From the Setup screen, scroll to Direct Launch and press O. 2 Select On. 32 MOTOtalkTM Note: If Direct Launch is set to On, the MOTOtalk setup options will be unavailable from the main menu. However, you can still access setup options while in MOTOtalk by pressing m and selecting MT Options. To turn off Direct Launch:

1 From the Setup screen, scroll to Direct Launch and press O. 2 Select Off. MT Options will now display when you select MOTOtalk from the main menu. Using State Tone To set your phone to alert after you have used MOTOtalk for a specified interval:

1 From the Setup screen, scroll to State Tone and press O. 2 Select the interval after which you want the tone to sound. For example, if you select 1 hour, you will be notified every hour that you are in MOTOtalk. To turn off State Tone:

1 From the Setup screen, scroll to State Tone and press O. 2 Select Off. 33 Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a Private call. When you send a call alert, the recipients phone emits a series of beeps, or vibrates, and displays your name or Private ID. The recipient can:

Answer begin a Private call with the sender

Queue store the call alert to the call alert queue, which is a list of call alerts

Clear dismiss and delete the call alert Sending Call Alerts 1 Enter the Private ID you want to send to, as you would when making a Private call. 2 Press A under Alert. Ready to Alert appears on the display. 3 Press the PTT button until Alert Successful appears on the display. Note: If the alert is not successful, the person you are trying to reach is on a call or has the phone turned off. Receiving Call Alerts When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or Private calls until you do. To answer a call alert:

Press the PTT button to make a Private call to the sender. To queue a call alert:

Press A under Queue. To clear a call alert:

Press O. -or-

Press A under Clear. -or-

If the flip is closed, press .. Note: The recent calls list also stores call alerts you have received. They appear as Private calls. Call alerts remain in your recent calls list until you delete them or until they reach the end of the list. Using the Call Alert Queue When you queue a call alert, it remains in the call alert queue until you make a Private call to the sender or delete it. 34 Call Alerts Viewing Call Alerts 1 From the main menu, select Call Alert. 2 Scroll through the list. Viewing Date and Time To view the date and time a call alert was received:

1 From the main menu, select Call Alert. 2 Select the call alert you want information on. Responding to Call Alerts in the Queue After you queue a call alert, you can respond to it by making a Private call to the sender or sending a call alert to the sender. Making a Private Call to the Sender 1 From the main menu, select Call Alert. 2 Scroll to the call alert you want to respond to. 3 Press the PTT button to begin the call. This removes the call alert from the queue. Sending a Call Alert to the Sender 1 From the main menu, select Call Alert. 2 Scroll to the call alert you want to respond to. 3 Press A under Alert. Ready to Alert appears on the display. 35 4 Press the PTT button until Alert Successful appears on the display. Deleting Call Alerts To delete a call alert from the queue:

1 From the call alert queue, scroll to the call alert you want to delete. 2 Press m. 3 Select Delete. 4 Press O or press A under Yes to confirm. To delete all call alerts from the queue:

1 From the call alert queue, press m. 2 From the call alert menu, select Delete All. 3 Press O or press A under Yes to confirm. Sorting Call Alerts Tip: You must have at least one call alert in the queue to access this feature. To sort call alerts by the order they were received:

1 From the main menu, select Call Alert. 2 Press m. 3 Select Sort By. 4 Select First on Top or Last on Top. Recent Calls The recent calls list displays information associated with calls you have made and received and call alerts you have received. It also displays My Info and contact information sent to you from other phones. The recent calls list displays up to 20 items. Calls and Call Alerts The recent calls list contains the numbers of up to 20 of the most recent calls you have made and received. If the number of a recent call is stored in Contacts, the following information appears:

The name assigned to the number

The picture assigned to the number, if your phone is set to show pictures on the recent calls list. See Choosing Picture View or List View on page 38. Pictures appear for phone calls only.

The Contacts type icon associated with the number. If the Contacts entry containing the number has more than one number or address stored, <> surrounds the Contacts type icon. For information on Contacts types, see page 41. The Private ID Contacts type icon appears when you receive a Private call or call alert, even if the number is not stored in Contacts. Call alerts you have received appear as Private calls. Like all items in the recent calls list, they remain listed until you delete them or until they reach the end of the list. For phone calls, an additional icon appears giving information about the call:

X A call you made. W A call you received. V A missed call. Missed calls appear on the recent calls list only if you have Caller ID. When you select a call to view its details, you see information such as the name associated with the call, the number, date, time, and duration of the call. My Info From Other Phones Note: This feature may not be offered by your service provider. The recent calls list displays My Info from other phones. See Sending My Info and Contact Information on page 116. 36 Recent Calls This icon j appears with My Info from other phones on the recent calls list, along with the Private ID of the person who sent the information. When you select My Info from other phones to view its details, you see all the information sent. If you receive My Info from the same phone more than once, only the most recently sent version appears in the recent calls list. Contact Information From Other Phones Note: This feature may not be offered by your service provider. The recent calls list displays contact information sent from other phones. This information comes from the other phones Contacts list or recent calls list. See Sending My Info and Contact Information on page 116. This icon d appears with contact information on the recent calls list. Contact information in the recent calls list displays:

The name contained in the contact information

The Contacts type icon associated with the number or address contained in the contact information. If the item contains more than one number or address stored, <> surrounds the Contacts type icon. The name or Private ID of the person who sent the contact information appears as a separate item on the recent calls list, above the information sent. If one person sends you more than one item of contact information, all the items appear below the persons name or Private ID. When you select contact information to view its details, you see the name or Private ID of the person who sent the information and all the information in the item. If you receive contact information with the same name from the same phone more than once, only the most recently sent version appears in the recent calls list. Viewing the Recent Calls List With the Flip Open 1 From the main menu, select Recent Calls. 2 Scroll through the list. 37 To view the details of an item on the list:

2 Press A under Store. -or-

Storing Items to Contacts From the recent calls list, select the item you want information on. Tip: To view the details of more items, keep scrolling. With the Flip Closed 1 Press .. 2 If you want to view the rest of the recent calls list, press the volume controls. 3 Press . to dismiss the recent calls list. Choosing Picture View or List View You can set your phone to show the picture associated with each item as you view the recent calls list or show the list without pictures. 1 From the recent calls list, press m. 2 Select Recent Calls View. 3 Select List View to show the recent calls list without pictures. -or-

Select Picture View to show the picture associated with each entry. Storing Items to Contacts 1 From the recent calls list, scroll to or select the item you want to store. If Store is not one of your options: Press m. Select Store or Update Contacts. Tip: If the item you want to store is a call, Store does not appear if the number is already stored in Contacts. 3 To store the item as a new entry, select [New Contact]. -or-

To store the number to an existing entry, select the entry. Note: Storing My Info or contact information from another phone to a Contacts entry that has a name assigned to it does not change the name of the Contacts entry. 4 If the item you want to store is a call, you must assign a Contacts type to the number:

With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number. 5 If you want to add more information to the entry, follow the applicable instructions in Creating Entries on page 42. 6 Press A under Save. 38 Recent Calls Deleting Items To delete an item from the recent calls list:

1 From the recent calls list, scroll to or select the item you want to delete. 2 Press A under Delete. -or-

If Delete is not one of your options: Press m. Select Delete. 3 Press O or press A under Yes to confirm. To delete all items on the recent calls list:

1 From the recent calls list, press m. 2 Select Delete All. 3 Press O or press A under Yes to confirm. Making Calls From the Recent Calls List With the Flip Open 1 From the main menu, select Recent Calls. 2 Scroll to the item containing the number you want to call. If you scroll to a call, you can make a call to the number that made the call. If the number is stored in Contacts, you can make a call to any of the numbers stored with it. 39 If you scroll to My Info from another phone, you can make a call to the Private ID of the phone that sent the information. If you scroll to contact information from another phone, you can make a call to any of the numbers in the contact information. 3 To place the call now, go to step 4. -or-

Scroll left or right to display the Contacts type for the number you want to call. 4 To make a phone call, press s. -or-

To make a Private call, press the PTT button. You can also make calls while viewing the details of an item on the recent calls list:

1 From the recent calls list, select the item containing the number you want to call. If you select a call or contact information from another phone, you can make a call to the number shown first on the details screen. If you scroll to My Info from another phone, you can make a call to the Private ID of the phone that sent the information. 2 To make a phone call, press s. -or-

To make a Private call, press the PTT button. With the Flip Closed 1 Press . to display the most recent call.

Making Calls From the Recent Calls List 2 Press the volume controls to scroll to the name or number you want to call. If you scroll to a call, you can make a call to the number that made the call. If you scroll to My Info from another phone, you can make a call to the Private ID of the phone that sent the information. If you scroll to contact information from another phone, you can make a call to the number currently displayed. 3 To make a phone call, press t on the top of your phone. -or-

To make a Private call, press the PTT button. 40

Contacts Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. Information stored in Contacts is saved on your SIM card. A Contacts entry contains:

A name A name is required if you are storing more than one number or address to the entry;

otherwise, it is optional. Typically, this is the name of the person whose contact information is stored in the entry.

A ring tone This is the sound your phone makes when you receive phone calls or call alerts from any of the numbers stored in the entry. You can assign the ring tone from your list of ring tones. If you do not assign a ring tone, the entry is created with a default ring tone assigned.

A picture This picture appears on the display when you receive phone calls from any of the phone numbers stored in the entry. You can assign the picture from the pictures stored accessible through media center. If you do not assign a picture, the entry is created with no picture assigned. 41

A Contacts type Each number or address stored must be assigned a Contacts type:

A Mobile phone number B Private Private ID C Work1 D Work2 E Home F Email G Fax phone number phone number phone number email address phone number H Pager phone number I Talkgroup Talkgroup number S SDG SDG list* number

* Selective Dynamic Group Calling (SDGC) may not be offered by your service provider. J IP IP address K Other phone number

A number or address Each Contacts entry must contain a number or address. This may be any type of phone number, Private ID, SDG list number, Talkgroup number, email address, or IP address. Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See Creating Pauses and Waits on page 48.

A Speed Dial number When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it.

A voice name If you create a voice name for a number, you can then dial that number by saying the voice name into your phone. This icon P appears to the left of the Contacts type icon if a voice name is assigned. Accessing Contacts From the main menu, select Contacts. -or-

If you are on a call: Press m. Select Contacts. Accessing Contacts Creating Entries A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details. After you have entered the number or address, Contacts type, and any other information you want, you can press A under Save to save the entry to Contacts. To cancel a Contacts entry at any time, press e to return to the idle screen. To create a Contacts entry:

1 To access the entry details screen:

Select Contacts > [New Contact]. -or-

From the Contacts list, press m. Select New Contact. 2 If you want to assign a name to the entry:

Select Name. Enter the name. See Entering Text on page 75. When you are finished, press O. Tip: Press A under Browse to select a name already in Contacts. 42 Contacts 3 If you want to assign a ring tone or picture to the entry, select [Ring Tone/Picture]. See Assigning a Ring Tone or Picture. 4 To assign a Contacts type to the number or address being stored:

Select the Contacts type field. Select the Contacts type you want to assign. Note: For information about creating SDG lists, see Creating SDG Lists in Contacts on page 65. 5 To store a number or address:

Select the # field (or ID for an email address, or IP for an IP address). Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see Entering Text on page 75. Tip: Press A under Browse to select a number or address from Contacts, the recent calls list, or Memo. When you are finished, press O. 6 If you want to change the default Speed Dial number or a create a voice name for the entry, select [Options]. See Assigning a Speed Dial Number or Voice Name on page 44. 43 7 If you want to add more numbers or addresses to the entry:

Scroll past the information you already entered. Enter the additional information for the entry using step 3 through step 6. You must assign a name to the entry, if you have not already. 8 Press A under Save. Assigning a Ring Tone or Picture Note: If you choose a picture or ring tone that is stored on the memory card, that picture or ring tone file is automatically moved to your phones memory. Only DRM items on the memory card can be assigned as ring tones. 1 If you have not already, select [Ring Tone/Picture]. 2 If you want to assign a ring tone from the list of ring tones:

With Ringer highlighted, scroll left or right to choose a ring tone. -or-

Select Ringer. Select the ring tone you want to assign. 3 If you want to assign a picture from the media center:

Scroll to Picture. Scroll left or right to choose a picture. -or-

Select Picture. Select the picture you want to assign. Some large pictures cannot be assigned. Tip: If an entry has a picture assigned and you want the entry to have no picture, select

[No Picture] or press A under Unassign. 4 When you are finished, press A under Back. Assigning a Speed Dial Number or Voice Name 1 If you have not already, select [Options]. 2 The default Speed Dial number assigned to a phone number is displayed in the Speed # field. This is always the next available Speed Dial location. If you want to assign the phone number to a different Speed Dial location:

With the Speed # field highlighted, press O. Press A under Delete to delete the current Speed Dial number. Enter the new Speed Dial number using the keypad. When you are finished, press O. Storing Numbers Faster 3 If you want to create a voice name for a phone number, select Voice Name. As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone. 4 When you are finished, press A under Back. Storing Numbers Faster To store numbers to Contacts from the recent calls list, see Storing Items to Contacts on page 38. To store numbers to Contacts from Memo, see Memo on page 70. To store numbers to Contacts from the idle screen:

1 Use the keypad to enter the number you want to store. 2 Press m. 3 Select Store Number. 4 To store the number as a new entry, select [New Contact]. -or-

To store the number to an existing entry, select the entry. 5 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number. 44 Contacts 6 If you want to add more information to the entry, follow the applicable instructions in Creating Entries on page 42. 7 Press A under Done. Editing Entries 1 From the Contacts list, scroll to or select the entry you want to edit. 2 Press A under Edit. -or-

If Edit is not one of your options: Press m. Select Edit. The entry details screen displays. 3 Follow the applicable instructions in Creating Entries on page 42 to edit the various fields. Viewing Entries When you view Contacts entries, you can choose how much detail you want to see. Viewing the Contacts List In this view, each entry shows:

The name assigned to the entry 45

A small version of the picture assigned to the entry, if you have set Contacts to show pictures in the Contacts list. See Choosing Picture View or List View on page 46.

The types of numbers and addresses stored in the entry To view entries from the Contacts list:

1 Access Contacts. 2 Scroll to view entries. Tip: To find Contacts entries faster, use the keypad to enter the first letter of the name. 3 If an entry has more than one number or address stored, <> surrounds the Contacts type icon. Scroll left or right to view the icon for each number stored in the entry. Selecting an Entry In this view, each entry shows:

The name assigned to the entry

A small version of the picture assigned to the entry

The name of the ring tone assigned to the entry

The numbers and addresses stored in the entry To select an entry:

1 From the Contacts list, select the entry you want to view. 2 Scroll to view the numbers and addresses stored in the entry. Tip: To select other entries: Scroll left or right. Or, press # or *. To return to the Contacts list, press A under Back. Viewing More Details When an entry is selected, you can view more details about the entry by selecting items within the entry. Viewing Details of a Number or Address 1 Select the entry. 2 Select the number or address you want to view details of. If you select a phone number, you can view its Speed Dial number and see whether it has a voice name. To return to the entry, press A under Back or press O. Viewing Entries Viewing a Large Picture To view a large version of the picture assigned to an entry:

1 Select the entry. 2 Select the first item shown on the entry screen. This item shows the name assigned to the entry or No Name. Note: You cannot make calls from this view. To return to the entry, press A under Back or press O. Choosing Picture View or List View You can set Contacts to show the picture assigned to each entry as you view the Contacts list or show the Contacts list without pictures. 1 From the Contacts list, press m. 2 Select Contacts View. 3 Select List View to show the Contacts list without pictures. -or-

Select Picture View to show the picture assigned to each entry. 46 Contacts Searching for a Name To search for a name in Contacts:

1 From the Contacts list, press A under Search.

-or-

If Search is not one of your options: Press m. Select Search. 2 Enter the name you want to see. See Entering Text on page 75. 3 Press O. Your phone finds the name you entered or the nearest match. Showing Only Private IDs, SDG Lists, and Talkgroups To set Contacts to show only entries that contain Private IDs, SDG lists, and Talkgroup entries:

1 From the Contacts list, press m. 2 Select Filter. 3 Set this option to Show Prvt/Grp. To set Contacts to show all entries:

1 From the Contacts list, press m. 2 Select Filter. 3 Set this option to Show All. 47 Deleting Entries Delete an Entry 1 From the Contacts list, scroll to or select the entry you want to delete. 2 Press m. 3 To delete the entire entry, select Delete Contact or Delete SDG List. 4 Press O or press A under Yes to confirm. Delete a Number or Address 1 From the Contacts list, scroll to the entry that contains the number or address you want to delete. 2 Scroll left or right to display the Contacts type for the number you want to delete. -or-

Select the entry. Scroll to or select the number you want to delete. 3 Press m. 4 Select Delete Number. 5 Press O or press A under Yes to confirm. Note: If an entry contains only one number or address, deleting the number or address deletes the entry. Checking Capacity To see how many numbers are stored in Contacts:

1 From the Contacts list, press m. 2 Select Capacity. Creating Pauses and Waits When storing a number, you can program your phone to pause or wait between digits while dialing. A pause makes your phone pause for 3 seconds before dialing further. A wait makes your phone wait for your response before dialing further. This feature is useful when using voice mail or other automated phone systems that require you to dial a phone number and then enter an access number. To program a pause:

Press and hold * until the letter P appears. The P represents a 3-second pause. If you store 17035551235P1234, when you select this number and make a call, your phone dials the first 11 digits, pauses for 3 seconds, then dials the last 4 digits. If you want a pause longer than 3 seconds, press and hold * more than once. Each P represents a 3-second pause. Checking Capacity To program a wait:

Press and hold * until the letter W appears. The W means your phone waits before dialing further. If you store 17035551235W1234, when you select this number and make a call, your phone dials the first 11 digits and then waits. A message appears asking if you want to send the rest of the digits. Press A under Yes to dial the last 4 digits. Tip: You can create pauses and waits while dialing a number from the keypad. See Creating Pauses and Waits While Dialing on page 56. International Numbers Note: This feature may not be offered by your service provider. When storing a number that you plan to use for international calls, use Plus Dialing:

1 Press and hold 0 for two seconds. A 0 appears, then changes to a +. Note: The network translates the + into the appropriate international access code needed to place the call. 2 Enter the country code, city code or area code, and phone number. 48 Contacts For information about making international calls, see Making International Calls on page 56. Making Calls From Contacts While Viewing the Contacts List 1 Access Contacts. 2 Scroll to the name or number you want to call. Tip: To find Contacts entries faster, use the keypad to enter the first letter of the name. 3 To place the call now, go to step 4. -or-

Scroll left or right to display the Contacts type for the number you want to call. 4 To make a phone call, press s. -or-

To make a Private call, press the PTT button. If you are making a Private call, your phone places the call to the Private ID stored in the Contacts entry, even if the Private icon is not displayed. If you are making a phone call:

Your phone places the call to the phone number assigned to the Contacts type displayed. If the Contacts type displayed is not a phone number, your phone places the call to the phone number stored in the Contacts entry. 49 If the Contacts type displayed is not a phone number and you have more than one phone number stored in the Contacts entry, your phone prompts you to select the phone number you want to place the call to. After Selecting an Entry 1 Access Contacts. 2 Select the Contacts entry that contains the number you want to call. 3 Scroll to or select number you want to call. 4 To make a phone call, press s. -or-

To make a Private call, press the PTT button. If you try to make a type of call that does not match the Contacts type of the number you chose, no call is placed. Accessing Contacts with GSM Phones If you plan to use the information stored in Contacts with an i2000, i2000plus, or any other GSM phone, download iDEN Phonebook Manager. Go to idenphones.motorola.com/iden/support for more information.

You can use iDEN Phonebook Manager to make the Contacts information saved to your i870 phones SIM card accessible in this type of phone. Accessing Contacts with GSM Phones 50 Call Forwarding Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display:

G Phone line 1 is active; calls to phone line 1 are being forwarded. I Phone line 1 is active; calls to phone line 2 are being forwarded. H Phone line 1 is active; calls to phone lines 1 and 2 are being forwarded. J Phone line 2 is active; calls to phone line 1 are being forwarded. L Phone line 2 is active; calls to phone line 2 are being forwarded. 51 K Phone line 2 is active; calls to phone lines 1 and 2 are being forwarded. To forward all calls:

1 From the main menu, select Call Forward >

Forward > All Calls. 2 Select To. If you specified a forwarding number for all calls before, this number displays. To forward calls to this number, press A under Back. To delete this number, press O, then press and hold A under Delete. 3 To enter the number you want to forward calls to:

Enter the number using your keypad. -or-

Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 4 Press O. All your calls are now forwarded to the number you specified. Turning Off Call Forwarding If you do not want all your calls forwarded, turn the feature off:

1 From the main menu, select Call Forward > To. 2 Set this option to Off. All your calls are now sent to your phone. Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail. Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. Forwarding Missed Calls You can specify a forwarding number for each type of missed call:

If Busy Your phone is on a call or transferring data. If No Answer You do not answer on the first 4 rings. If Unreachable Your phone is out of coverage or powered off. Turning Off Call Forwarding Note: If you want a type of missed call sent to voice mail, the call forwarding number for that type of missed call must be your voice mail access number. To forward missed calls:

1 From the main menu, select Call Forward >

Forward > Detailed. 2 Select If Busy to specify a forwarding number for calls received when your phone is busy. 3 If you specified a forwarding number for this type of call before, this number displays. To forward calls to this number, press B under Back and go to step 6. -or-

To delete this number, press O, then press and hold A under Delete. 4 To enter the number you want to forward this type of call to:

Enter the number using your keypad. -or-

Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 5 Press O. 6 Repeat step 2 through step 5 for If No Answer and If Unreachable. 7 When you are finished, press A under Back. 52

Call Forwarding Viewing Call Forwarding Settings 1 From the main menu, select Call Forward >

Forward > All Calls. 2 With To highlighted, press A under Status. 53 Advanced Calling Features Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. If you are on a call and receive a second call, your phone emits a tone and displays a message saying you are receiving a second call. To accept the second call and put the active call on hold:

Press A under Yes. To accept the second call and end the active call:

1 Press e. Your phone rings with the second call. 2 Answer the second call. To decline the second call:

Press A under No. If you subscribe to voice mail, the call is forwarded to your voice mail box, unless you set Call Forward for If Busy to a different number. Turn Off Call Waiting To turn off Call Waiting during a call:

1 Press m. 2 Select In Call Setup > Call Waiting. 3 Set this option to Off. Tip: To turn Call Waiting back on while still on the call, set this option to On. To turn off Call Waiting for the next call you make or receive:

1 From the main menu, select Settings > Phone Calls > Call Waiting. 2 Set this option to Off. Call Waiting is turned back on when you end the call. Switching Between Calls Any time you have one call active and one call on hold, to make the call on hold active and put the active call on hold:

Press A under Switch. -or-

If Switch is not one of your options: Press m. Select Switch. 54 Advanced Calling Features Putting a Call on Hold 1 While on an active call, press m. 2 Select Hold. If you want to make the call active again, press A under Resume. Calling 2 People Putting a Call on Hold, Making a Second Call 1 Place or receive a phone call. 2 While the call is active, press m. 3 Select 2nd Call. This puts the call on hold. 4 Enter the second phone number you want to call. Tip: For quick ways to enter the number, press m. 5 Press s to place the call. To end the second call and make the call on hold active again:

Press e. To make the call on hold active and put the active call on hold:

Press A under Switch. 55 Merging 2 Calls into a 3-Way Call After you put a call on hold and place a second call, you can combine these calls into a 3-way call:

1 Press m. 2 Select Join. All 3 people in the call can speak to and hear each other. Making a 3-Way Call 1 Place or receive a phone call. 2 While the call is active, press m. 3 Select 3 Way. This puts the call on hold. 4 Enter the second phone number you want to call. Tip: For quick ways to enter the number, press m. 5 Press s to place the call. 6 Press A under Join. All 3 people in the call can speak to and hear each other. Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For information on using pauses and waits, see Creating Pauses and Waits on page 48. To create a pause while dialing a phone number:

1 From the keypad, enter the digits you want to occur before the pause. 2 Press m. 3 Select Insert Pause. 4 Enter the digits you want to occur after the pause. To create a wait while dialing a phone number:

1 From the keypad, enter the digits you want to occur before the wait. 2 Press m. 3 Select Insert Wait. 4 Enter the digits you want to occur after the wait. Creating Pauses and Waits While Dialing Making International Calls Note: This feature may not be offered by your service provider. Plus Dialing lets you place an international call to most countries without entering the local international access code. 1 Press and hold 0 for two seconds. A 0 appears, then changes to a +. Note: The network translates the + into the appropriate international access code needed to place the call. 2 Enter the country code, city code or area code, and phone number. One Touch PTT One Touch PTT sets your phone to call the most recent Private ID or SDG list on the recent calls list, or a Private ID you choose, every time you press the PTT button. Setting One Touch PTT To the Most Recent Private ID or SDG List 1 From the main menu, select Settings > 2-Way Radio > One Touch PTT. 2 Set this option to Last Call. 56 Advanced Calling Features To A Private ID 1 From the main menu, select Settings > 2-Way Radio > One Touch PTT > Assigned Number. 2 To enter the Private ID you want your phone to call every time you press the PTT button:

Enter the number using your keypad. -or-

Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. Tip: If you are entering a Talkgroup number, enter # before the number. 3 Press O. Turning Off One Touch PTT 1 From the main menu, select Settings > 2-Way Radio > One Touch PTT. 2 Set this option to Off. Quick PTT Note: This feature may not be offered by your service provider. 57 Quick PTT lets you quickly access any Private IDs on your phone so that you can make a Private call, or create a SDG list and make a SDG call. For more information about SDG lists, see Selective Dynamic Group (SDG) Calls on page 65. To view a list of Contacts and SDG lists with Private IDs in Contacts:

1 From the idle screen, press m. 2 Select Quick PTT. To move between Contacts, the recent calls list, and Memo:

Scroll left or right. -or-

Press * or #. To make a Private call or SDG call:

1 Select the entries you want. 2 Press A under Done. 3 Press the PTT button. To save your selections as a SDG list:

1 Press m. 2 Select Store SDG. 3 If you want to assign a name to the SDG list, enter the name. Note: If you do not assign a name, the SDG list is named SDG followed by the number of members in the SDG list. For example, SDG (8) for a SDG list with 8 members. 4 Press O. Setting Flip Actions For Answering Calls To set your phone to answer calls when you open the flip:

1 From the main menu, select Settings > Phone Calls > Flip Activation > Flip to Ans. 2 Set this option to On. To set your phone not to answer calls when you open the flip:

Set Flip to Ans to Off in step 2. For Ending Calls To set your phone to end calls when you close the flip:

1 From the main menu, select Settings > Phone Calls > Flip Activation > Flip to End. 2 Set this option to On. Setting Flip Actions To set your phone not to end calls when you close the flip:

Set Flip to End to Off in step 2. Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call. Call Timers Call timers measure the duration of your phone calls, Private or group calls, and circuit data use, as well as the number of Kilobytes sent and received by your phone:

Last Call displays the duration of your most recent phone call.

Phone Reset keeps a running total of your phone call minutes, until you reset it.

Phone Lifetime displays the total minutes of all your phone calls.

Prvt/Grp Reset keeps a running total of all of your Private and group call minutes, until you reset it.

Prvt/Grp Lifetime displays the total minutes of all your Private and group calls. 58 phone and the other device.To connect your phone wirelessly, you must have a Bluetooth adapter for the other device. To create a wired connection, use a data cable. Connecting with a Data Cable To use a data cable to connect your phone to a laptop, handheld device, or desktop computer:

1 Open the connector cover. connector cover Advanced Calling Features

Circuit Reset keeps a running total of all of your circuit data use, until you reset it.

Circuit Lifetime displays the total minutes of all of your circuit data use.

Kbytes Reset keeps a running total of the number of Kilobytes sent and received by your phone, until you reset it. To view or reset a timer:

1 From the main menu, select Call Timers. 2 Select the feature you want to view or reset. 3 To view a feature without resetting: Press O when you are finished viewing. -or-

To reset a feature: Press A under Reset. Press O or press A under Yes to confirm. Note: The values displayed by Call Timers should not be used for billing. Call timers are estimates only. Using Your Phone as a Modem Note: This feature may not be offered by your service provider. You can use your phone as a modem with a laptop, handheld device, or desktop computer. In order to use your phone as a modem, you must create either a wired or wireless connection between your 59 2 With the phones display facing up, insert a data cables connector into the accessory connector, until you hear a click. 3 Insert the data plug into the data port of the other device. Connecting with Bluetooth To use your phone as a modem via Bluetooth, the laptop, handheld device, or desktop computer you want to connect to must have a Bluetooth adapter installed. Check that the adapter is properly installed, and then follow the specific instructions outlined in the devices user guide to connect the device to your phone. Making TTY Calls About Data Transfer Modes When used as a modem, your phone has these data transfer modes:

Circuit data used for sending and receiving faxes and for transferring large files

Packet data used for small file transfers such as email To use these services, you must install the iDEN Wireless Data Services software (available separately). For more information on setting up your computer and your i870 phone for packet and circuit data calls, refer to the Wireless Data Services Users Guide or contact your service provider. Making TTY Calls Note: This feature may not be offered by your service provider. To use your phone to make phone calls using a teletypewriter (TTY) device:

1 Connect one end of a 2.5mm cable into the audio jack on your phone. Connect the other end of the cable to your TTY device. 2 Make sure that your phones TTY feature is on and select the TTY mode you want to use. 60 Advanced Calling Features 3 Use your phone to enter phone numbers and make calls. When you make a TTY call, these icons appear on the phones display:

N Phone call is active. O Phone call is on hold. TTY device features such as Turbo-Code, High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone. Turning On the TTY Feature Your phones TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the TTY baud rate. To make sure the TTY feature is on:

From the main menu, select Settings > Phone Calls > TTY > Use TTY. This field must say On. Choosing a Mode Your phone supports these TTY modes:

TTY You type and read text on your TTY device. 61

VCO (Voice-Carry-Over) You speak into your phone and read text replies on your TTY device.

HCO (Hearing-Carry-Over) You type text on your TTY device and listen to voice replies on your phone speaker. To change mode while not in a call:

1 From the main menu, select Settings > Phone Calls > TTY > Type. 2 Select the TTY mode you want. When you make a TTY call, the call begins in the TTY mode you last selected. To change mode during a call using your phone:

1 Press m. 2 Select In Call Setup > TTY > Type. 3 Select the mode you want. To change mode during a call using your TTY device, issue one of the following commands:

VCO please to select VCO mode HCO please to select HCO mode HCO off please to turn off HCO mode

Important: When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear.

(For information on setting the volume of your phone speaker, see Setting the Volume on page 155.) Changing the TTY Baud Rate By default, your phones TTY baud rate is set to 45.45, the baud rate required for TTY calls within the U.S. To make calls outside the U.S., set your TTY baud rate to 50.00. To change the TTY baud rate:

1 From the main menu, select Settings > Phone Calls > TTY > Baud. 2 Select the baud rate for your location. Making TTY Calls 62 Group Calls and Selective Dynamic Group Calls Group Calls and Selective Dynamic Group Calls Note: Selective Dynamic Group Calling (SDGC) may not be offered by your service provider. Your phone gives you 2 ways to call more than one Private ID at once:

Group calls calls to a Talkgroup

Selective Dynamic Group calls calls to a SDG list Note: In order to store SDG lists to your i870, you must use a SDG-capable SIM card. For more information about SDG-capable SIM cards, contact your service provider. SDG lists created with your i870 phone are not readable by an older iDEN SIM-based phone. 63 Set-up SDG Calls Dynamically, via your phone Group Calls Predefined, via your service provider administrator using Group Management Group Names Talkgroups I SDG lists S Voice Activated Dialing Yes No Group Calls A group call is similar to a Private call, but is made to all members of a Talkgroup at once. A Talkgroup is a predetermined group of your service providers customers. Before you can make or receive group calls, a Talkgroup must be established. After the Talkgroup is established, you must join the Talkgroup. Joining a Talkgroup Your sales representative or your service provider establishes Talkgroups for you and assigns each Talkgroup a Talkgroup number. You can choose a name for each of your Talkgroups when you create entries for them in Contacts. To receive group calls made to any of these Talkgroups, you must join the Talkgroup. 1 From the main menu, select Contacts. 2 Scroll to the Talkgroup you want to join. 3 Press A under Join. Note: You can only monitor one Talkgroup at a time. Making Group Calls 1 Press #. Then enter the Talkgroup number using the keypad. -or-

Choose the Talkgroup name from Contacts or recent calls list. 2 Proceed as if making a Private call. Receiving Group Calls To answer a group call:

Proceed as if answering a Private call. Only one person at a time may speak on a group call. Group Calls The Private ID or name of the person who is speaking will appear on the display below the Talkgroup number. Turning off Group Calls To set your phone to prevent you from hearing group calls to your Talkgroup:

1 From the main menu, select Settings > 2-Way Radio > Tkgrp Silent. 2 Set this option On. To set your phone to let you hear group calls to your Talkgroup:

Set Tkgrp Silent to Off in step 2. 64 Group Calls and Selective Dynamic Group Calls Selective Dynamic Group

(SDG) Calls Note: This feature may not be offered by your service provider. A SDG call is similar to a Private call, but is made to all members of a SDG list at once. A SDG list is a group of Private IDs that you create using your phone. A SDG list must contain at least 2 members and can contain up to 20 members. You can create a SDG list for one call only or store it to Contacts so you can call it any time. You can use Send via PTT* to send SDG lists to other phones that have this capability.

* Send via PTT may not be offered by your service provider. Creating SDG Lists in Contacts 1 From the main menu, select Contacts. 2 Select [New SDG List]. Note: You can also create a SDG list by selecting [New Contact] and assigning the SDG contact type. 3 If you want to assign a name to the SDG list, enter the name. 65 Note: If you do not assign a name, the SDG list is named SDG followed by the number of members in the SDG list. For example, SDG (8) for a SDG list with 8 members. 4 Add Private IDs. See Adding Private Numbers. 5 If you want to create a voice name for the SDG list, select [Options] > Voice Name. As directed by the screen prompts, say and repeat the voice name you want to assign to the SDG list. Speak clearly into the microphone. 6 Press A under Save. Adding Private Numbers You can add Private IDs to a SDG list by selecting them from Contacts, the recent calls list, or memo. You can add all members in an existing SDG list by selecting the list. You can select more than one member from Contacts and the recent calls list. A checkmark appears next to each selected item. Tip: To deselect an item: Scroll to a selected item and press O. You can also enter Private IDs from the keypad. To add members from Contacts, the recent calls list, or Memo:

1 While creating a SDG list, select [Add Member].

-or-

2 Select [Add Number] and press A under Browse. Note: To move between Contacts, the recent calls list, and Memo, scroll left or right, or press * or #. 3 Scroll to the members you want from Contacts, the recent calls list, or Memo and press O. A checkmark appears next to each selected member. Note: To deselect a member, scroll to a selected member and press O. 4 Press A under Done. To add members manually from the keypad:

1 While creating a SDG list, select [Add Number]. 2 Enter the Private number using the keypad. 3 Press O. Removing Members or SDG Lists To remove a member from a SDG list:

1 From Contacts, scroll to the SDG list you want to delete the member from. Selective Dynamic Group (SDG) Calls 2 Press A under Edit. 3 Scroll to the member you want to remove. 4 Press m. 5 Select Remove Member. 6 Select Save. To remove all members from a SDG list:

1 From Contacts, scroll to the SDG list you want to delete the member from. 2 Press A under Edit. 3 Press m. 4 Select Remove All Members. 5 Press A under Yes. To delete a SDG list from Contacts:

1 Scroll to the SDG list you want to delete. 2 Press m. 3 Select Delete SDG List. Storing SDG Lists Faster From the Recent Calls List 1 From the recent calls list, select the SDG list you want. 2 Press A under Store. 3 If you want, add more information to the entry. 4 Press A under Save. 66 Group Calls and Selective Dynamic Group Calls From an Active SDG Call 1 During an active SDG call, press m. 2 Select Store SDG. 3 If you want, add more information to the entry. Note: You cannot record a voice name during an active call. 4 Press A under Save. Making SDG Calls With the Flip Open 1 From Contacts or the recent calls list, scroll to or select the SDG list you want. -or-

Press and hold t until a prompt appears telling you to say the voice name. Say the voice name assigned to the SDG list you want. -or-

From the idle screen, press the number on your keypad for the shortcut you assigned to the SDG list you want. -or-

Enter or select a Private ID and add more Private IDs. See Starting a SDG Call with a Private ID. 2 Press the PTT button. 67 With the Flip Closed To make a SDG call from the recent calls list with the flip closed:

1 Press .. Press the volume controls to scroll to the SDG list you want. -or-

Press and hold t until a prompt appears telling you to say the voice name. Say the voice name assigned to the SDG list you want. 2 Press the PTT button. Starting a SDG Call with a Private ID You can start a SDG call with any Private ID you want to call. 1 Choose the first Private ID that you want in the SDG call:

From the idle screen, enter the Private ID. -or-

From the Contacts list, scroll to an entry containing the Private ID. -or-

From recent calls list, scroll to an entry containing the Private ID. 2 Press m. 3 Select Call New SDG. 4 Add more Private IDs. See Adding Private Numbers on page 65. 5 If you want to save the SDG list you have created: Press m. Select Store SDG. -or-

If you do not want to save the SDG list, press A under Done. 6 To make the call, press the PTT button. Receiving SDG Calls To answer a SDG call:

Proceed as if answering a Private call. Only one person at a time may speak on a SDG call. SDG Call Information While you are in a SDG call, the following appears on the screen:

The name of the SDG list

The name or the Private ID of the person speaking

The number of participants in the SDG call SDG Call Details During a SDG call, you can view details about the other SDG list members, such as their name or Private ID, and their status on the call. To view SDG call details, press A under Details. Selective Dynamic Group (SDG) Calls In the SDG Call Details view, these icons appear next to member names or Private IDs:

T The member of the SDG list who is speaking. A A member of the SDG list who is active on the SDG call, but not speaking. O A member of the SDG list who has exited the call. U A member of the SDG list who could not be reached on the SDG call. u A member of the SDG list whose status is unknown. Sending SDG Lists Using Send via PTT Note: Send via PTT may not be offered by your service provider. You can send a SDG list using Send via PTT so that the person who receives the SDG list can use the list. 1 From Contacts or the recent calls list, scroll to or select the SDG list you want. -or-

From the idle screen, press the number on your keypad for the shortcut you assigned to the SDG list you want. 68 Group Calls and Selective Dynamic Group Calls 2 Press m. 3 Select Send SDG via PTT. 4 To include yourself in the list, press A under Yes. -or-

To exclude yourself from the list, press A under No. Note: If you choose to include yourself and the list already contains 20 members, you will be prompted that the list is full. You will be excluded from the list. 5 Enter the Private ID of the person you want to send the SDG list to. -or-

Select Browse to select a contact from Contacts, the recent calls list, or Memo. 6 Press O. 7 To send the SDG list, push the PTT button. The SDG list will display in the recent calls list on the phone that you send the SDG list to. 69 Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo:

1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press O. To view the memo later:

From the main menu, select Memo. To delete the memo:

1 From the main menu, select Memo. 2 Press and hold A under Delete. 3 Press O. To edit the memo:

1 From the main menu, select Memo. 2 Enter the new number. 3 Press O. To make a call to the memo number:

1 From the main menu, select Memo. 2 To make a phone call, press s. -or-

To make a Private call, press the PTT button. To store the memo number to Contacts:

1 From the main menu, select Memo. 2 Press m. 3 Select Store to Contacts. 4 To store the number as a new entry, select [New Contact]. -or-

To store the number to an existing entry, select the entry. 5 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number. 6 Press A under Save. 70 1 From the main menu, select Ring Tones >

VibeAll. 2 Set this option to On. Tip: Pressing the volume controls to turn down the volume as far as possible sets VibeAll to On. Note: You must press the volume up key twice from VibeAll in order to restore ring tone. To set your phone to vibrate instead of making a sound for some features but not others:

1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Select Vibrate from the list of ring tones. 4 Select the features you want to set to make no sound. 5 When you are finished, press A under Done. Note: To set ring options for Private calls, group calls, and SDG calls, see Setting Your Phone to Vibrate on page 155. Ring Tones To set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via PTT, or Datebook reminders:

1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound; Silent sets your phone to neither vibrate nor make a sound. Tip: Highlighting a ring tone lets you hear it. 4 Select the features you want to assign the ring tone to. 5 When you are finished, press A under Done. Note: This icon M appears on the display if you set your phone to neither vibrate nor make a sound for phone calls. Setting Your Phone to Vibrate You can set your phone to vibrate instead of making a sound when you receive all phone calls, Private calls, group calls, SDG calls, call alerts, messages notifications, pictures sent using Send via PTT, and Datebook reminders. 71 These icons indicate how the ringer is set. Q The phone always vibrates instead of making a sound. R The phone vibrates instead of making a sound for phone calls. u Private calls, group calls, and SDG calls are heard through the earpiece, not the speaker. These icons may appear at the same time. Ring and Vibrate To set your phone to ring and vibrate when you receive phone calls or call alerts:

1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll through the list of ring tones and highlight the one you want to assign. 4 Press m. 5 Select Assign w/Vibe. 6 Select the features you want to set to ring and vibrate. 7 When you are finished, press A under Done. This icon S appears on the display. Ring and Vibrate Assigning Ring Tones to Contacts You can set the ring tone your phone makes when you receive phone calls or call alerts from someone you have stored in Contacts. Note: If you choose a ring tone that is stored on the memory card, that ring tone file is automatically moved to your phones memory. 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign. 4 Select A Contact. 5 Select the Contacts entry you want to assign the ring tone to. Viewing Ring Tone Assignments 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Highlight any ring tone. 4 Press m. 5 Select Overview. 72 Ring Tones 6 Scroll to view ring tones assigned to features and Contact entries. Downloading More Ring Tones If you want to use other ring tones, you can download them into your phone for a fee. For more information about custom ring tones and downloading instructions, please contact your service provider. About DRM Ring Tones Your phone supports gifting and Tell-A-Friend services for DRM ring tones. However, these services may not be offered by your service provider. Please contact your service provider for more information about these services. For more information about DRM items, see Digital Rights Management on page 110. Managing Memory To view the amount of memory available for custom ring tones:

1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Highlight any ring tone. 73 4 Press m. 5 Select Memory Usage. Deleting custom ring tones frees memory. Note: Ring tones are stored in your phone using the same memory space used to store messages, voice records, pictures, videos, audio recordings, and Java application data that are stored in your phones memory. Deleting or moving some of these other items frees memory for ring tones. Deleting Custom Ring Tones Deleting a ring tone from the list of ring tones deletes it from all parts of your phone, including the media center and Contacts. Except for DRM ring tones, if you delete a ring tone that you purchased from your phone, you will have to purchase it again. Under certain conditions, some DRM vendors will not charge you if you download an item multiple times within a given time frame. Please contact the DRM vendor to learn more about their download regulations. To delete a custom ring tone:

1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll to the ring tone you want to delete. 4 Press m. 5 Select Delete. 6 Press A under Yes to confirm. Deleting Custom Ring Tones 74 Entering Text You can enter text, numbers, and symbols into your phone using Alpha, Word, Numeric, or Symbol text input modes. l Alpha Press a key several times for each character. j Word Press a key once for each letter while words likely to be the one you want are chosen from a database. i Symbols Enter punctuation and other symbols. k Numeric Enter numbers. When you access a screen that requires you to enter text, you start in the mode last used. To choose a text input mode:

1 At a screen that requires you to enter text, press m. Using Word Mode In Word mode, T9 Text Input analyzes the letters on the keypad button you press and arranges them to create words. As you type, T9 Text Input matches your keystrokes to words in its database and displays the most commonly used matching word. You can add your own words to this database. Entering a Word 1 Select Word as your text input mode. 2 Type a word by pressing one key for each letter. For example, to type test press 8 3 7 8. The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 3 If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database. Repeat until the desired word appears. 2 Select the text input mode you want to use. A checkmark appears next to the current mode. If the desired word does not appear, you can add it to the database. 75 Adding Words to the Database 1 Select Alpha as your text input mode. 2 Type the word using Alpha mode. 3 Select Word as your text input mode. 4 Press #. The word you typed in Alpha text entry mode is now in the database. Note: You cannot store alphanumeric combinations, such as Y2K. Choosing a Language To change the language of the database:

1 At a screen that requires you to enter text, press m. 2 Select Languages. 3 Select the language you want for your database. Special Function Keys Some of the phones keys assume different functions while in Alpha or Word mode. Spaces Press # for a space. Special Function Keys Capitalization When you press and hold the # key, it acts as a 3-way toggle. Press and hold # to make the next letter typed uppercase (shift), to make all subsequent letters typed uppercase (caps lock), or to go back to lowercase letters. These icons appear:

m or X Shift is on. n or W Caps lock is on. When neither of these icons appear, letters typed are lowercase. Scrolling up after typing a letter makes that letter uppercase. Note: When creating a text message, you cannot capitalize by scrolling up. Your phone automatically makes the first letter of a sentence uppercase. Punctuation Press 1 or 0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want. 76 Entering Text Note: Additional punctuation symbols are available in Symbols mode. 77 Messages You can receive the following types of messages on your phone:

Voice mail messages

Depending on your service provider, you may have the option to receive Short Message Service (SMS) text messages, fax mail, and Net alerts. You have 2 ways to access the messages you receive:

Respond to the message notification that appears when the message is received.

Dismiss the message notification and access the message later through the message center. You can listen to or view these messages, delete them, or continue to store them in the message center. Message Notifications When you receive a message, your phone notifies you with text on the display and a notification tone or vibration. You can access the message or dismiss the notification. If you dismiss the notification, the message is not deleted. It can be accessed through the message center. If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message, you dismiss the notification, or the alert time-out expires. Setting Notification Options To control whether your phone sounds message notification tones while you are on phone calls:

1 From the main menu, select Settings > Phone Calls > Notifications. 2 Select the option you want:

Receive All Tones sound during calls for all types of messages.

Message Mail Only Tones sound during calls for SMS messages; tones for all other types of messages are held until you end calls.

Delay All Tones for all types of messages are held until you end calls. Tip: To set notification options during a call:

Press m. Select In Call Setup >

Notifications. 78 Messages Message Center The message center manages your messages. All your messages are stored in the message center. The message center shows how many messages you have of each type. To access your messages through the message center:

1 From the main menu, select Messages. 2 Scroll to the type of message you want to access. 3 Press O or press A under the display option on the left. 79 Voice Mail Messages Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. Receiving a Message When you receive a voice mail message, New Voice Mail Message appears on the display. To call your service providers voice mail system and listen to the message:

Press A under Call. To dismiss the message notification:

If the flip is closed, press .. -or-

If the flip is open, press O or press A under Back, or close the flip. If the caller leaves a message, this icon y appears on the display, reminding you that you have a new message. Accessing Voice Mail from the Message Center From the main menu, select Messages > Voice Mail. Sending Unanswered Calls to Voice Mail To send a phone call to voice mail instead of answering it:

If the flip is closed, press .. -or-

Press e. -or-

Press A under No. 80 MOSMS Messages Note: This feature may not be offered by your service provider. If your service provider offers MOSMS, your phone sends SMS messages using MOSMS and receives SMS messages from other phones that are using MOSMS. Setting Up Before you begin using MOSMS, you may need to set up your signature, service center number, and expiration information:

1 From the main menu, select Messages. 2 Scroll to Text Inbox. 3 Press m. 4 Select Text Msg Setup. 5 Select Signature. Enter your signature. It may be up to 11 characters long. When you are finished, press O. 6 Select Srvc Cntr No. Enter the phone number of your service center. If you do not know this number, contact your service provider. 81 When you are finished, press O. 7 Select Expire After. This is the amount of time messages you send are saved at the service center if they cannot be delivered. After this period, they are discarded. Scroll to select the number of days you want your messages to be saved. When you are finished, press O. 8 Select Auto Clean Up. Set this option to On if you want your phone to delete sent messages. If you set Auto Clean Up to On, select Clean Up After to set the number of days after which sent messages are deleted or the number of messages to be kept. 9 Press A under Done to save the information you entered. Receiving a Message To view the message:

Press A under Read. To dismiss the message notification:

If the flip is closed, press .. -or-

If the flip is open, press A under Back or close the flip. If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area. Tip: While reading a text and numeric message that contains a phone number, you can press s to call that number. Reading from the Message Center 1 From the main menu, select Messages > Text Inbox. 2 Select the message you want to read. -or-

Press the number of the message you want to read. 3 If the message fills more than one screen, scroll to read it. Tip: Scrolling through one message lets you view the next message. 4 To save the message, press O. -or-

To reply to the message, press A under Reply.

-or-

To see all other choices, including forwarding and deleting the message, calling the sender, or Reading from the Message Center storing the senders number in Contacts, press m. Creating and Sending Messages 1 From the main menu, select Messages >

[Create Message]. -or-

Select [Create Message] from Text Inbox, Text Outbox, or Drafts. -or-

Highlight Quick Notes and press A under Create. Tip: This option is available from many context-sensitive menus in the message center. 2 To address the message:

Use the keypad to enter the phone number of the person you want to send the message to.

-or-

Press A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. When you are finished, press O. 3 Enter the text of the message. -or-

82 MOSMS Messages To use a quick note: Press A under Browse. Scroll to the quick note you want. For more information on quick notes, see Using Quick Notes. When you are finished, press O. 4 If you want to send the message, press A under Send. -or-

To edit the message, press O. -or-

To delete the message without sending it, press A under Cancel. -or-

If you want to request confirmation of delivery, save the message as a draft, or set the sending method, press m. Select the option you want. Beginning Messages From the Recent Calls List 1 From the recent calls list, scroll to the name you want to send a message to. 2 If the entry has more than one phone number stored, view the phone number you want to send the message to. 3 Press m. 4 Select Compose SMS. The message is automatically addressed to the phone number you chose. 83 5 Follow step 3 through step 4 of Creating and Sending Messages on page 82. Beginning Messages From the Idle Screen 1 Using the keypad, enter the number you want to send a message to. 2 Press m. 3 Select Compose SMS. The message is automatically addressed to the phone number you chose. 4 Follow step 3 through step 4 of Creating and Sending Messages on page 82. Using Quick Notes Quick notes are short, pre-written text messages that you can create, edit, and send. You can store up to 20 quick notes. A quick note may be up to 30 characters long. To create a quick note:

1 From the main menu, select Messages > Quick Notes > [New Note]. 2 Press O or press A under Create. Enter text.

-or-

To choose from pre-installed notes, select the note you want. Tip: For more options, including sending the quick note, press m. Using Drafts When you save a message as a draft, it is saved in the drafts folder. To edit a draft:

1 From the main menu, select Messages >

Drafts. 2 Select the draft you want to edit. 3 To edit the fields you want to change, follow step 2 through step 4 in Creating and Sending Messages on page 82. Resending Messages To resend a message:

1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to resend. -or-

Press the number of the message you want to resend. 3 Press s. -or-

Press m. Select Resend. Creating and Sending Messages Deleting Sent Messages To delete a sent message:

1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to delete. 3 Press A under Delete. 4 Press A under Yes to confirm. To delete all unlocked sent messages:

1 From the main menu, select Messages > Text Outbox. 2 Press m. 3 Select Delete All. 4 Press A under Yes to confirm. Locking and Unlocking Sent Messages When you lock a message, it cannot be deleted until you unlock it. Locking a Message 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to lock or unlock. 3 Press m. 84 The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some. The outbox and drafts folder share memory space. Together they can hold 30 messages. If the outbox and drafts folder memory is full, you cannot send messages or save drafts until you delete some. To view the amount of memory available in your text inbox:

1 From the main menu, select Messages > Text Inbox. 2 Press A under Memory. To view the amount of memory available in your outbox and drafts folder:

1 From the main menu, select Messages > Text Outbox or Messages > Drafts. 2 Press A under Memory. MOSMS Messages 4 Select Lock. Unlocking a Message 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to lock or unlock. 3 Press A under Unlock. Sorting Messages You can sort messages in your inbox by sender, time and date, and status. You can sort messages in your outbox by recipient, time and date, and status. 1 From the main menu, select Messages > Text Inbox or Messages > Text Outbox. 2 Highlight any messages. 3 Press m. 4 Select Sort and Order. 5 Select Sort By to specify the sorting method. 6 Select Order By to specify the sorting order. Managing Memory Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages. 85 Camera The camera in your i870 phone takes pictures and records videos. You can save these pictures and videos to your phones memory or the memory card, depending on the storage preference you chose. You can access these saved pictures and videos through the media center. You can send the pictures you take either in Private calls or with Bluetooth. You can also assign them to Contacts entries, or set them as your phones wallpaper. Accessing the Camera From the main menu, select Camera. -or-

Press c. -or-

On your keypad, press the number assigned to the Camera shortcut. -or-

Access the camera from the media center. See Accessing the Camera on page 99. -or-

Access the camera during a Private call. See Starting a Call by Sending a Picture on page 115. -or-

If you set the camera as a power up application under Settings, then press p to power up your phone. Taking Pictures 1 Access the camera. 2 If you want to adjust the zoom, spotlight, picture quality, picture size, or a timer, set these options. See Setting Picture Options on page 87. 3 Aim the camera lens on the flip. Use the internal display as the viewfinder. 4 When the image you want to capture is in view, press c or press O or press A under Capture. Note: If you insert the memory card into the phone now, you are prompted to save the picture you have just captured to the memory card. Choosing to save the picture to the memory card does not change your storage preferences after the picture is saved. 5 To save the picture, press c or press O or press A under Store. -or-

To discard the picture without saving it, press A under Discard. -or-

To choose another action, see More Actions for Captured Pictures on page 88. 86 Camera Setting Picture Options When you take a picture, you can set the zoom, spotlight, picture quality, and picture size, and set a timer to delay capturing the picture. To set any of these options:

1 Press m. 2 Select the option you want. 3 Select the value you want for that option. Tip: You can also set zoom from the viewfinder by scrolling up and down and set picture size by scrolling left and right. If you either discard the picture or save it by either pressing O or selecting Save from the context-sensitive menu, the only picture option that changes is the timer. The timer returns to its default: Off. If you choose any other action, all picture options return to their defaults. Zoom The Zoom option lets you choose a closer view. The values are:

1X no change 2X twice as large 4X 4 times as large 87 1X is the default. Spotlight The Spotlight option turns on or off the cameras spotlight to provide additional light for close-up pictures. Off is the default. Picture Quality The Picture Quality option lets you choose the sharpness the picture will have after it is captured. The values are:

Normal no change

Fine higher resolution When you receive your phone, Normal is the default. You can choose a new default for this option. See Customizing the Camera on page 90. Pictures taken with this option set to Fine use more memory space. Picture Size The Picture Size option lets you choose the size the picture will have after it is captured. From smallest to largest, the values are: Small, Medium, Wallpaper, Large, XLarge, and Max.

If you plan to use the image as wallpaper, it is best to select the Wallpaper size. When you receive your phone, Medium is the default. You can choose a new default for this option. See Customizing the Camera on page 90. Larger pictures use more memory space. Self-Timer The Self-Timer option lets you delay capturing the picture for the number of seconds you choose. The camera captures the picture after the amount of time you chose elapses. To turn off the timer before the picture is captured, press A under Cancel. The values are: Off, 10 seconds, 15 seconds, 20 seconds. Off is the default. More Actions for Captured Pictures After you capture a picture as described in Taking Pictures on page 86, you can send it in a Private call or with Bluetooth, assign it to a Contacts entry, or set it as your phones wallpaper. You can also access the media center to view and perform actions on the pictures there. More Actions for Captured Pictures Choosing any of these options automatically saves the captured picture. Sending in Private Calls For information on sending captured pictures in Private calls, see Starting a Call by Sending a Picture on page 115. Assigning to Contacts 1 After you have captured a picture, press m. 2 Select Set As Caller ID. 3 To store the picture to a new entry, select [New Contact]. -or-

To store the picture to an existing entry, select the entry. Only entries that include phone numbers are displayed. This icon g appears next to entries that have pictures assigned. 4 If you selected an entry with a picture assigned, press O or press A under Yes to overwrite the assigned picture. -or-

Press A under No to return to the list of entries without overwriting the assigned picture. 88 Camera Setting as Wallpaper 1 After you have captured a picture, press m. 2 Select Set As Wallpaper. Recording Videos Recording a video is similar to taking a picture. If you store videos you record in phone memory, you can record videos up to 30 seconds long. If you record video onto the memory card, the video length is limited by how much memory is available on the card. 1 Access the camera. 2 Press m. 3 Select Record Video. 4 If you want to adjust lighting:

Press m. Select Spotlighting. Select On or Off. 5 Aim the camera lens on the flip. Use the internal display as the viewfinder. 6 If you want to zoom in or out, scroll up or down. If you want to change the image size, scroll left or right. 7 When you are ready to record, press and release c, press and release O, or press and 89 release A under Record. Releasing the key starts the recording. 8 If you want to end the video, press c or press A under Stop. 9 To save the video, press c or press O. -or-

To view the video without saving it, press A under Review. -or-

To discard the video without saving it, press A under Discard. Changing Storage Preference While you are using the camera, you can choose whether media items are saved to your phones memory or to the memory card. 1 Access the camera. 2 Press m. 3 Select Memory Card > Store Media. 4 Select On Phone to set your phone to save media items to the phones memory. -or-

Select Prefer On Card to set your phone to save media items to the memory card, if it is available. If the memory card is not available, media items are saved to your phones memory. The location that you choose becomes the Store Media option in Settings. Accessing the Media Center You can access the media center from the camera at any time, except when you are using the Camera Setup menu or viewing the memory screen. 1 Press m. 2 Select Media Center. Customizing the Camera The Camera Setup menu lets you customize the camera:

Ask for Name If you set this option to On, you are prompted to enter a name for each picture before you save it. Otherwise, pictures are automatically saved with the date and a number as their names.

Default Size sets the default value for the Picture Size option.

Default Video Size sets the default size of the image of videos that are recorded.

Default Quality sets the default value for the Picture Quality option. Accessing the Media Center Note: The volume of the shutter sound is controlled by your phones speaker volume.To set your phones speaker volume, see Setting the Volume on page 155. To access the Camera Setup menu:

1 Access the camera. 2 Press m. 3 Select Camera Setup. Tip: This option is available from many context-sensitive menus when you are using the camera. Managing Memory While you are taking pictures, the percentage of free memory in the default storage location appears on the screen. To view details about memory on either the memory card or your phone, access the Memory Usage screen. To view your used memory, free memory, and memory capacity on your phone and the memory card:

1 Access the camera. 2 Press m. 3 Select Memory Usage. 90 Camera Tip: This option is available from many context-sensitive menus when you are using the camera. To free memory on your phone, delete items from the media center, voice records, or Java applications. To free memory on the memory card, delete items from the cards folders. 91 Media Center The media center lets you access pictures, videos, and audio recordings stored in your phones memory or on the memory card inserted in your phone. All pictures and videos stored in your phones memory can be accessed through the media center. The following audio recordings can be accessed through the media center:

Voice records created when your phone was not in a call

Musical ring tones in the list of ring tones

Audio recordings you downloaded to your phone Because the memory card inserted in your phone may contain files saved to it using a device other than your phone, not all types of pictures, videos, and audio recordings on the memory card may be accessed through your phones media center. To view files stored on the memory card, you must store the given file in its corresponding format folder: audio files to the Audio folder, pictures to the Images folder, and videos to the Video folder. The files must be in the following formats:

File Type Audio Task Playback Images View Video Capture Playback Record Formats MIDI (FM-Midi, Type-0, 16 Polyphony, SP-Midi compliant), WAV (8 kHz, 8-bit Mono PCM Canonical Format), MP3, AMR, AU GIF (GIF89A and GIF87A), JPEG, WBMP, PNG JPG H.263, MPEG4 H.263 Pictures in the media center can be sent in Private calls using Send via PTT or via Bluetooth. See Using Send via PTT on page 114 andSending Contacts, Datebook Events and Pictures on page 139. Note: You can transfer pictures from your phone to your computer using a data cable and software you can download. Go to idenphones.motorola.com/iden/support for more information. You can also transfer pictures by copying the pictures first to the memory card and then to your computer. 92 Media Center Viewing the Media Center To access the media center:

From the main menu, select Media Center. -or-

From the camera, press m. Select Media Center. Scroll to view the items in the media center. Choosing Thumbnail View or List View You can set the media center to show a thumbnail of each picture as you view the list of items or show the list of items without thumbnails. To change views:

1 Access the media center. 2 Press m. 3 Select Set View. 4 Select Plain List View or Thumbnail List View. Filtering by Media Type You can set the media center to show all types of media items, only pictures, only videos, or only audio recordings. If you have the memory card in your phone, the items stored in your phones memory are listed separately from the items stored on the memory card. 93 If you do not have the memory card in your phone, you have these filtering options:

All all items accessible through the media center.

Pictures all pictures.

Video all videos.

Audio all audio recordings accessible through the media center. If you have the memory card in your phone, you have these filtering options:

Phone: All all items in your phones memory that are accessible through the media center.

Phone: Pictures all pictures in your phones memory.

Phone: Video All videos in your phones memory.

Phone: Audio all audio recordings in your phones memory that are accessible through the media center.

Card: All all items on the memory card that are accessible through the media center.

Card: Pictures all pictures on the memory card that are accessible through the media center.

Card: Video all videos on the memory card that are accessible through the media center.

Card: Audio all audio recordings on the memory card that are accessible through the media center. Setting Filtering 1 Access the media center. 2 Press m. 3 Select Filter. 4 Select the filtering option you want. Accessing Items Listed To access a picture, video, or audio recording, select it from the list of items in the media center. With an item selected, scroll up or down to access the items that appeared before and after it in the list. Sorting by Time or Name You can set the media center to sort items by the time the item was created or by the name of the item. 1 Access the media center. 2 Press m. 3 Select Setup. Forward Locked Items 4 Select Sort. 5 Select By Time or By Name. Forward Locked Items Some items saved to the media center from Private calls, or by downloading may be forward locked. Forward locked items are usually copyright protected, and you cannot share them with anyone, such as in Private calls or by uploading them from your phone. You cannot remove forward locking from an item. When you view items in the media center, one of these icons appears next to each forward locked item:

f Forward locked. c Forward lock and locked. When an item is locked, it cannot be deleted from the media center. See Locking Items on page 98. Locking an item has no effect on its forward locking. 94 Media Center DRM Items Except for Java applications, which download to Java Apps, the default location for any DRM items that you download is the media center. Depending on the storage preference you have chosen, these items may be saved to your phones memory or the memory card inserted in your phone. Depending on how a given third-party vendor has set rights for an item, the item may include the following status icons. c The item is a DRM item. e The DRM item has expired. All DRM items are forward locked. As with other items in media center, you can lock DRM items. See Locking Items on page 98. For more information about DRM items, see Digital Rights Management on page 110. Note: While your phone supports gifting and Tell-A-Friend services for DRM items, these services may not be offered by your service provider. Please contact your service provider for more information. 95 Pictures The media center lets you view pictures, send them via Private calls or Bluetooth, assign them to Contacts entries, or set them as your phones wallpaper. Viewing To view a picture, select it from the list of items in the media center. If your phone is set to show thumbnails, a thumbnail of each picture appears next to the picture in the list of items. If your phone is not set to show thumbnails, this icon g appears next to the picture. To see a larger or smaller view of the picture you are viewing:

1 Press m. 2 Select Zoom. 3 Select the zoom option you want. If the picture does not fit in the display, scroll left and right and up and down to view different parts of the picture.

 

 

Sending in Private Calls For information on sending stored pictures in Private calls, see Starting a Call by Sending a Picture on page 115. Assigning to Contacts 1 Scroll to or select the picture you want to assign to a Contacts entry. 2 Press m. 3 Select Set As Caller ID. 4 To store the number as a new entry, select [New Contact]. -or-

To store the number to an existing entry, select the entry. Only entries that include phone numbers are displayed. This icon g appears next to entries that have pictures assigned. 5 If you selected an entry with a picture assigned, press O or press A under Yes to overwrite the assigned picture. -or-

Press A under No to return to the list of entries without overwriting the assigned picture. Setting as Wallpaper 1 Scroll to or select the picture you want to set as wallpaper. Videos 2 Press m. 3 Select Set As Wallpaper. Note: If you later set your wallpaper to Auto Cycle, the picture is included and will appear on the idle screen. See Wallpaper on page 155. Videos The media center lets you play videos. Playing To play a video, select it from the list of items in the media center. This icon V appears next to each video in the list of items. Tip: When viewing the list of items in the media center, you can scroll left or right, or press

* or #, to change the type of media that is displayed in the list. To stop the video before it has finished playing:

Press O. -or-

Press A under Stop. -or-

Scroll left. To restart the video, scroll right. 96 Media Center Audio Recordings The media center lets you play audio recordings and assign them to Contacts entries. Playing To play an audio recording, select it from the list of items in the media center. This icon a appears next to each audio recording in the list of items. Tip: When viewing the list of items in the media center, you can scroll left or right, or press

* or #, to change the type of media that is displayed in the list. To stop the audio recording before it has finished playing:

Press O. -or-

Scroll left. To restart the audio recording, scroll right. When you play an audio recording, an animated image appears on the display. 97 Assigning to Contacts To assign an audio recording in the media center as the ring tone for a Contacts entry:

1 Scroll to or select the audio recording you want to assign. 2 Press m. 3 Select Assign As Ringer. 4 Select the Contacts entry you want to assign the ring tone to. Note: You cannot assign a voice record as the ring tone for a Contacts entry. Renaming Items 1 Access the media center. 2 Scroll to or select the item you want to rename. 3 Press m. 4 Select Rename. 5 Delete the items name and enter a new name. 6 Press O. Locking Items When you lock an item in the media center, it cannot be deleted until you unlock it. 1 Access the media center. 2 Scroll to or select the item you want to lock or unlock. 3 Press m. 4 Select Lock to lock the item. -or-

Select Unlock to unlock the item. When you view items in the media center, one of these icons appears next to each locked item:

R Locked. c Forward lock and locked. Deleting Items Deleting items from the media center means they can no longer be accessed anywhere in your phone, including the list of ring tones, the list of voice records, and Contacts. Locking Items Under certain conditions, some DRM vendors will not charge you if you download an item multiple times within a given time frame. Please contact the DRM vendor to learn more about their download regulations. Deleting an Item 1 Scroll to or select the item you want to delete. 2 Press m. 3 Select Delete. 4 Press O or A under Yes to confirm. Deleting All Items You can delete all unlocked items currently in view, depending on how media center filtering is set. See Filtering by Media Type on page 93. If filtering is set to show all types of media center items, all unlocked items are deleted. 1 Access the media center. 2 Press m. 3 Select Delete All. 4 Press O or A under Yes to confirm. 98 Media Center Accessing the Camera You can access the camera from the media center at any time, except when you are viewing a list of audio recordings, playing an audio recording, or using the Setup menu. Select [Camera] from the list of items. -or-

Press c. -or-

Press A under Camera. Copying and Moving Items If you have the memory card in your phone, you can copy and move items in the media center from your phones memory to the memory card or from the memory card to your phones memory. 1 Access the media center. 2 Scroll to or select the item you want to delete. 3 Press m. 4 To copy the item, select Copy to Phone or Copy to Card. -or-

To move the item, select Move to Phone or Move to Card. 99 Some items cannot be copied or moved:

DRM pictures and ring tones cannot be copied. Some DRM pictures and ring tones cannot be moved, depending on their rights settings.

Forward locked pictures and ring tones cannot be copied or moved to the memory card.

Videos over 30 seconds long cannot be copied or moved to your phones memory. If you try to copy or move an item that cannot be copied or moved, your phone displays a message telling you that this action cannot be performed. Changing Storage Preference While you are using the media center, you can choose whether media items are saved to your phones memory or to the memory card. 1 Access the media center. 2 Press m. 3 Select Memory Card > Store Media. 4 Select On Phone to set your phone to save media items to the phones memory. -or-

Select Prefer On Card to set your phone to save media items to the memory card, if it is available. If the memory card is not available, media items are saved to your phones memory. The location that you choose becomes the Store Media option in Settings. Accessing the Audio Player Your i870 phone includes an audio player that you can use to play MP3 audio files stored on the memory card inserted in your phone. To access the audio player from the media center:

1 Access the media center. 2 To view the audio recordings on your memory card, press m. Select Filter > Card: Audio. 3 Select [Audio Player] Play Audio Files. -or-

Press A under Player. Managing Memory To view your used memory, free memory, and memory capacity of your phone and the memory card:

1 Access the media center. -or-

Scroll to or select any item in the media center. 2 Press m. 3 Select Memory Usage. To free memory, delete or move items. Accessing the Audio Player Note: Items accessible through the media center that are stored in your phones memory use the same memory space used to store Java application data, and voice records created when your phone is in a call. Deleting some of these other items frees memory. 100 Audio Player Your i870 phone includes an audio player that you can use to play MP3 audio files stored on the memory card inserted in your phone. The audio player supports the following MP3 formats:

MP3 version Bit Rates

(kbits/sec) Sampling Rates

(KHz) Channel mode MPEG-1, MPEG-2, MPEG-2.5. 32, 40, 48, 56, 64, 80, 96, 112, 128,160, 192. 8, 11.025 , 12 ,16, 22.05 , 24, 32 , 44.1, 48. Stereo and Mono. The audio player groups the MP3 audio files on the memory card into folders and list. When you select an audio file to play, the audio player plays this audio file and then plays the other audio files grouped with it. If you receive a phone call, Private call, group call, Talkgroup call, call alert, message notification, a Datebook reminder, or a GPS notification while playing an audio file with the audio player, the audio file pauses and a prompt appears asking you if you want to accept the incoming item or ignore it. 101 The audio player begins playing at the currently selected volume, even when Vibe All is set to On. Playing Audio Files with the Flip Closed The controls on the front of your phone enable you to use the audio player with your phones flip closed:

To access the audio player, press and hold y any time your phone is not in a call or transferring data.

To play an audio file once you have accessed the audio player, press y.

To pause an audio file or resume playing it again, press y.

To skip to the next audio file, press z.

To skip to the previous audio file, press x.

To fast-forward, press and hold z.

To rewind, press and hold x.

To adjust the volume, use the volume keys.

To exit the audio player, press .. Note: When the audio player is active, y, z, and x pause, play, skip, fast-forward, and rewind even when the flip is open. Playing Audio Files with the Flip Open When your phones flip is open, you have more ways to access the audio player and play the MP3 audio files on the memory card. Accessing the Audio Player From the Main Menu From the main menu, select Audio Player. From the Media Center 1 Access the media center. 2 To view the audio recordings on your memory card, press m. Select Filter > Card: Audio. 3 Select [Audio Player] Play Audio Files. -or-

Press A under Player. Playing Audio Files 1 Access the audio player. 2 Scroll to a folder. Tip: The Songs folder contains all the audio files on the memory card in a single list. 3 To play the first audio file in the folder, press A under Play. (If the folder you scrolled to contains Playing Audio Files with the Flip Open subfolders, this plays the first audio file in the first of these subfolders.) -or-

Press O to view the contents of the folder. Then scroll to an audio file and press A under Play to play it, or scroll to a folder and press A under Play to play the first audio file in it, Any time you are viewing a list of folders with the audio player, you can scroll to a folder press A under Play to start playing the contents of that folder or press O to view the contents of the folder. Any time you are viewing a list of audio files, you can scroll to an audio file and press A under Play to play it. To stop viewing a folder and return to the folder or list that contains it, press A under Back. Other Basic Functions Viewing the Details of a Playing Audio File While you are playing an audio file, the Now Playing option appears on the main screen of the audio player. Select this option to view the details of the audio file currently playing. Pausing and Resume To pause a playing audio file, press A under Pause or press O. 102 Audio Player To resume playing a paused audio file, press A under Play or press O. Skip to Next and Skip to Previous To skip to the next audio file, press and release the right side of the navigation key, as if scrolling right. Do not hold the right side of the navigation key. To skip to the previous audio file, press and release the left side of the navigation key, as if scrolling left. Do not hold the left side of the navigation key. Fast-Forward and Rewind To fast-forward a playing audio file, press and hold the right side of the navigation key for 2 seconds, as if scrolling right. To rewind a playing audio file, press and hold the left side of the navigation key for 2 seconds, as if scrolling left. Adjust the Volume To adjust the volume, use the volume keys. Exit To exit the audio player, press A under Exit. If Exit is not one of your options, press A under Back or Cancel until it is. 103 How Your Audio Files Are Organized The audio player groups the MP3 audio files on the memory card into folders and list. Since you will probably want to use the audio player primarily to play songs, the audio player treats the MP3 audio files on the memory card as songs when grouping and organizing them. The audio player uses meta-data found in most MP3 audio files to group the files on the memory card by album, artist, and genre. You can also create your own groupings of audio files, called playlists. When you access the audio player, you see that the audio files are grouped into these folders:

Songs All MP3 audio files on the memory card inserted in your phone, listed alphabetically by title.

Playlist Folders and lists you have created. If you have not created any playlists, this folder contains only the Favorite playlist, which is empty.

Albums Songs grouped by album. The albums are listed alphabetically by title. The songs on the albums are listed in the order that they normally appear on the album.

Artists Songs grouped by artist. The artists are listed alphabetically by name. Within each artists folder, the songs are listed alphabetically by title.

Genre Songs grouped by genre. The artists are listed alphabetically by name. Within each artists folder, the songs are listed alphabetically by title. In the Albums, Artists, and Genre folders, any MP3 audio files that do not contain enough meta-data to be grouped by album, artist, or genre are paced in a folder labelled Unknown. Searching By First Letter Any time you are viewing an alphabetically list of audio files or folders, you can go the items starting with any letter by using your phones keypad to enter that letter. Playing a List, Repeat, and Shuffle When you select a audio file to play, the audio player plays this audio file and then plays the other audio files grouped with it. The repeat and shuffle features help determine which of these songs are played. Searching By First Letter If you are not using the repeat or shuffle features, the audio player plays the audio file you select and then plays the rest of the files in the list or folder, in the order they appear, until it gets to the end of the list or folder. The audio player then goes to the beginning of the list and pauses until you resume playing. The repeat feature lets you set the audio player to play all the audio files in a list or folder, in order, starting again at the beginning of the list when it gets to the end, without pausing or stopping. It also lets you set the audio player to play one audio file repeatedly, starting over as soon as it ends. The shuffle feature lets you set the audio player to play the audio files in a list or folder in random order, until you stop it. Setting Repeat 1 While viewing a list or viewing the details of the audio file currently playing, press m. 2 Select Repeat. 3 To set the audio player to repeatedly play the contents of a list or folder, in order, select All.

-or-

To set the audio player to play one song repeatedly, select One. -or-

To turn off the repeat feature, select Off. 104 Audio Player Setting Shuffle 1 While viewing a list or viewing the details of the audio file currently playing, press m. 2 Select Shuffle. 3 To set the audio player to play the audio files in a list or folder in random order, select On. -or-

To turn off the shuffle feature, select Off. Working with Playlists Playlist are lists of audio files you create from the files already available through the audio player. Playlists enable you to group audio files as you like them, but they do not change anything in the other folders or on the memory card. Adding a file to a playlist does not copy it or move it. Removing a file from a playlist, or deleting the playlist that a file is listed in, does not delete the file from any other location. Creating a Playlist 1 Access the audio player. 2 Select Playlists. 3 Select [New Playlist]. 4 If you want to give the playlist a name, enter the name. See Entering Text on page 75. When you are finished, press O. 105 Note: If you do not assign a name, the playlist is named playlist followed by the number of unnamed playlists you have, including this one. For example, the first playlist you create without naming is automatically named Playlist1. 5 Select [Add Song]. A list of all MP3 audio files on the memory card appears. Tip: For options to help you sort through this list, press m. 6 Select each audio file you want to put on the playlist. A checkmark appears next to each selected file. Tip: To deselect a selected item: Scroll to a selected file and press O. 7 When you are finished selecting files, press A under Done. 8 If you want to change the order of the audio files on a playlist, see Reordering a Playlist. 9 Select Save. Editing a Playlist After you have created a playlist, you can change its name, add audio files, remove audio files, and change the order of the audio files. 1 Access the audio player. 2 Select Playlists. 3 Scroll to the playlist you want to edit. 4 Press m. 5 Select Edit Playlist. 6 Make the changes you want. 7 Select Save. Reordering a Playlist You can change the order of the audio files on a playlist before you save a new playlist or later, while editing the playlist. 1 Before you have saved a new playlist or while editing a playlist, press m. 2 Select Reorder List. 3 Scroll to the audio file you want to move. 4 Press A under Grab. 5 Scroll to the place where you want the audio file to appear. 6 Press A under Insert. Working with Playlists 7 Repeat step 3 through step 6 for all the items you want to move. 8 Press A under Done. Removing Audio Files You can remove some or all audio files from a playlist before you save a new playlist or later, while editing the playlist. Removing an Audio File From a Playlist 1 Before you have saved a new playlist or while editing a playlist, press m. 2 Scroll to the audio file you want to remove. 3 Select Remove Song. Removing All Audio Files From a Playlist 1 Before you have saved a new playlist or while editing a playlist, press m. 2 Select Remove All Songs. 3 Press O or A under Yes to confirm. Reordering Playlists To change the order of the playlists in the Playlists folder:

1 Access the audio player. 2 Select Playlists. 3 Press m. 106 Audio Player 4 Scroll to the playlist you want to move. 5 Press A under Grab. 6 Scroll to the place where you want the playlist to appear. 7 Press A under Insert. 8 Repeat step 3 through step 7 for all the items you want to move. 9 Press A under Done. Deleting Playlists Delete a Playlist 1 Access the audio player. 2 Select Playlists. 3 Scroll to the playlist you want to delete. 4 Press m. 5 Select Delete Playlist. 6 Press O or A under Yes to confirm. Deleting All Playlists 1 Access the audio player. 2 Select Playlists. 3 Press m. 4 Select Delete All Playlist. 5 Press O or A under Yes to confirm. 107 This deletes all playlists except the Favorites playlist. Using the Favorites Playlist The Favorites playlist is a permanent playlist. You can add audio files, remove audio files, and change the order of the audio files, but you cannot rename it or delete it. You can add audio files to the Favorites playlist as you would any other playlist. You can also add audio files to the Favorite playlist using the Add to Favorites shortcut. Add the Audio File Currently Playing 1 While viewing a list or viewing the details of the audio file currently playing, press m. 2 Select Add to Favorites. Add Any Audio File 1 Access the audio player. 2 Select Songs. 3 Scroll to the audio file you want. 4 Press m. 5 Select Add to Favorites. Deleting Audio Files You can delete audio files from the memory card one at a time, by album, by artist, by or genre. You can also delete all MP3 audio files from the memory card by deleting everything in the Songs, Albums, Artists, or Genres folder. Deleting an audio file removes it from all playlists it appears on. Deleting all the songs that appear on a playlist removes the playlist. Deleting an Audio File 1 Access the audio player. 2 Select the folder containing the audio file you want to delete. 3 If the folder you selected contains more folders, within that folder, select the folder containing the audio file you want to delete. 4 Select the audio file you want to delete. 5 Press m. 6 Select Delete Song. 7 Press O or A under Yes to confirm. Deleting an Album, Artist, or Genre 1 Access the audio player. 2 Select the folder containing the audio files you want to delete: Albums, Artist, or Genre. Deleting Audio Files 3 Select the album, artist, or genre you want to delete. 4 Press m. 5 Select Delete Album, Delete Artist, or Delete Genre. 6 Press O or A under Yes to confirm. Deleting All MP3 Audio Files Deleting everything in the Songs, Albums, Artists, or Genre folder deletes all MP3 audio files from the memory card. 1 Access the audio player. 2 Select Songs, Albums, Artist, or Genre. 3 Press m. 4 Select Delete All Music. 5 Press O or A under Yes to confirm. DRM Items Some of the MP3 audio files on the memory card may be DRM items. When a DRM items has expired, you can no longer play it. If you scroll to an audio file that is expired and try to play it, a message saying you cannot play it appears. If you play a list containing an expired audio file, the audio player skips over the expired item and no message is displayed. 108 Viewing Visuals To view visuals on the display instead for the details of the song currently playing:

1 While viewing the details of the audio file currently playing, press m. 2 Select Turn On Visuals. To view the details of the song currently playing instead for visuals:

1 While viewing visuals press m. 2 Select Turn Off Visuals. Audio Player Setting Audio and Visual Options You can customize the sound of the audio player by setting the equalizer. You can customize the look of the audio player screen by choosing a theme or by viewing visuals while listening to an audio file. Setting the Equalizer 1 From anywhere in the audio player, press m. 2 Select Equalizer. A checkmark appears next to the equalizer mode that is in use. 3 Select the equalizer mode you want. Choosing a Theme The theme you choose control the appearance of the audio player screens. 1 Access the audio player. 2 Press m. 3 Select Theme. A checkmark appears next to the theme that is in use. 4 Select the theme you want. 109 Digital Rights Management When you download multimedia content available online, such as audio, images, or Java applications, these items may be subject to DRM restrictions. DRM, or digital rights management, is a system that defines how copyrighted multimedia content can be distributed and used. DRM sets items to time-based or count-based usage settings. Time-based settings let you use the given item for a specified interval. Examples of time-based settings include being able to use an item for a specified number of days from the date of purchase, a specified number of days from the date that the item is first used, or a specified number of minutes. Count-based settings let you use an item for a specified number of times after you download it or for unlimited use. Installing Items Except for DRM Java applications, DRM items will automatically install once they have finished downloading. To install DRM Java applications, see Installing Applications on page 128. Installing Items To send the DRM installation to the background, press e. Understanding DRM Status Icons Depending on how a given third-party vendor has set rights for an item, the item may include the following status icons:

c The item is a DRM item. e The DRM item has expired. As with other items in media center, you can lock DRM items. See Locking Items on page 98. Note: All DRM items are forward locked. See Forward Locked Items on page 94. Sharing Items Note: These features may not be offered by your service provider. You can gift a DRM item to a friends phone. Gifting is when you purchase a copy of a DRM item and send it to someone. If you do not want to gift an item, you can send a message to a friends phone 110 Digital Rights Management that contains the link for purchasing the item. The friend can then purchase the item quickly and easily. Sending this type of message is called Tell-A-Friend. Gifting To check if a DRM item is giftable:

1 Go to the location on your phone that contains the item you want. 2 Highlight the DRM item you want to gift. 3 Press m. If Gift is an option, the item is giftable. To gift a DRM item:

1 Go to the location on your phone that contains the item you want. 2 Highlight the DRM item you want to gift. 3 Press m. 4 Select Gift. 5 Select the contact you want to send the item to.

-or-

If the person you want to send the item to is not in contacts, select [New Number]. Enter the number. 6 Press O. 7 Follow the vendors instructions for purchasing an additional license. 111 Tell-A-Friend 1 Go to the location on your phone that contains the item you want. 2 Highlight the DRM item you want to tell your friend about. 3 Press m. 4 Select Tell-A-Friend. The Create Message screen opens. 5 Complete and send the message. See Creating and Sending Messages on page 82. Managing DRM Items Note: Depending on how the third-party vendor has set rights for the given DRM item, you may be unable to perform some of the following tasks. Viewing License Information You can check a DRM items license to view the following information:

For time-based items, either the date and time the item is scheduled to expire, or the number of days left

For count-based items, the number of credits

(uses) left or an unlimited use notice

The name of the items vendor To view the license of a DRM item:

1 Go to the location on your phone that contains the item you want. 2 Highlight the DRM item you want to view license information for. 3 Press m. 4 Select License Info. Renewing DRM Licenses Note: You can only renew DRM licenses if the license contains a link to the page where you purchased the item. 1 Go to the location on your phone that contains the item you want. 2 Highlight the DRM item you want to renew. 3 Press A under Renew or press m. Select Renew. 4 Select the link to the page where you purchased the item. 5 Follow the vendors instructions for purchasing an additional license. Managing DRM Items Deleting Items If you delete a DRM item that you purchased from your service provider from your phone, you will have to purchase it again to download it. Under certain conditions, third-party vendors will let you download an item multiple times within a given time frame, even if you deleted the item. Please contact the third-party vendor of an item to learn more about the vendors download regulations. To delete an item:

1 Go to the location on your phone that contains the item you want. 2 Highlight the DRM item you want to delete. 3 Press m. 4 Select Delete. 5 If prompted, press A under Yes. About Expired Items If you are using an item when it expires, once you finish your session with the item, you will be unable to use the item. 112 Digital Rights Management When ring tones and wallpapers expire, they are automatically removed from their respective lists. For expired items that continue to display in their respective lists, you can either choose to renew the license for the item or else manually delete the item. Note: You cannot delete locked items. 113 Using Send via PTT Send via PTT lets you exchange pictures, My Info, and contact information with other phones that have this capability. You do this through Private calls. Send via PTT cannot be used during group calls. Sending a Picture Note: This feature may not be offered by your service provider. When you send a picture using Send via PTT, the picture you sent appears on the display of the phone you are engaged in the Private call with, is saved by that phone, and then is accessible through that phones media center. Sending a Picture During a Call You can send a picture at any time during a Private call, whether you made or received the call*.

* Additional charges may apply. You cannot talk or listen on a Private call while a picture is being transmitted. Other activities, such as taking or searching for a picture, do not prevent you from talking or listening. Taking a Picture to Send Note: For more information on taking pictures, see Taking Pictures on page 86. 1 While in a Private call, press c or press A under Camera. 2 When the picture you want to capture is in view, press c or press O or press A under Capture. 3 To save the picture so you can send it, press c or press O or press m and select Save [OK].

-or-

To discard the picture without sending it, press A under Discard. Repeat step 2 until you capture a picture you want to send. 4 Press the PTT button to send the picture. 5 Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted. 6 When prompted, press the PTT button to resume the Private call. Sending a Stored Picture 1 While in a Private call: Press A under Browse. A list of pictures that can be included in a Private call appears. 2 Select the picture you want to send. 3 Press the PTT button to send the picture. 114 Using Send via PTT 4 Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted. 5 When prompted, press the PTT button to resume the Private call. Starting a Call by Sending a Picture You can start a Private call after you capture a picture with the camera or by choosing a stored picture from the media center. To do this, you must have the Private ID and IP address of the person you want to send to stored in your Contacts. 1 Capture a picture with the camera. See Taking Pictures on page 86. -or-

From the media center, scroll to or select the picture you want to send in a Private call. 2 Press m . 3 Select Transfer > Send via PTT. A list of names from Contacts appears. These names have Private IDs and IP addresses stored. 4 Select the name of the person you want to send the picture to. 5 To clear the picture, press m. Select Clear. -or-

115 To send the picture, press the PTT button. Note: If you select Clear, the picture is only removed from the transfer. You can still access it in the media center. 6 Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted. 7 When prompted, press the PTT button to resume the Private call. Receiving a Picture When someone sends you a picture using Send via PTT, your phone emits tone or vibrates and a message appears on the display asking you if you want to accept the picture. Pictures you receive are saved to your phones memory or to the memory card inserted in your phone, depending on the storage preference you chose, and are then accessible through the media center. When you receive a picture, it appears every time you are in a Private call with the person who sent it unless you delete the picture from the media center. This occurs for the last 20 people who sent you pictures. Accepting a Picture 1 When you see the message asking you if you want to accept the picture, press A under Yes. 2 Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted. 3 When prompted, press the PTT button to resume the Private call. Tip: If you want to stop the transmission before it is finished, press A under Cancel. Declining a Picture When you see the message asking you if you want to accept the picture, press A under No. The picture is not transmitted. Clearing a Picture From The Display If you want to remove a picture from your phones display while still in the Private call in which you received it or while in a subsequent Private call with the person who sent it:

1 Press m. 2 Select Clear Screen. Sending My Info and Contact Information This does not delete the picture from your phones media center. The picture will appear on the display again the next time you receive a Private call from person who sent it. Setting Picture Capability To turn your phones ability to send and receive pictures in Private calls on or off:

1 From the main menu, select Settings > 2-Way Radio > PTT Picture. 2 Select On or Off. This setting does not affect your phones ability to send and receive My Info or contact information. Sending My Info and Contact Information When you send My Info or contact information using Send via PTT, the information you sent appears on the display of the phone you are engaged in the Private call with. After the call, the information appears on the recent call list of that phone. 116 Using Send via PTT Sending My Info You can control what portion of the information in My Info is sent and whether it is sent automatically in every Private call or only when you choose to send it. See Setting Sending Options on page 120. Tip: When you send My Info, certain information, such as your email address or fax number, cannot be included. To send complete contact information, create an entry for yourself in Contacts and send it. Sending Information During a Call 1 While in a Private call, press m. 2 With Send via PTT highlighted, press O. 3 When Ready to Send appears on the display, press the PTT button to send the information. Starting a Call by Sending Information 1 From the main menu, select My Info. 2 Press m. 3 With Send via PTT highlighted, press O. 4 Use the keypad to enter the Private ID you want to send the information to. -or-

Press A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 117 5 When Ready to Send appears on the display, press the PTT button to send the information. Sending Contact Information You can send contact information by selecting a Contacts entry or an item from the recent calls list. Contacts entries that contain only addresses cannot be sent. When Contacts entries are received, they do not include ring tones or pictures. These items from the recent calls list can be sent:

Contact information sent from other phones

Calls to or from numbers stored in your Contacts list Sending Information During a Call 1 While in a Private call, press m. 2 Select Contacts or Recent Calls. 3 Scroll to the Contacts entry or item in the recent calls list you want to send. 4 Press m. 5 Select Send Contact via PTT or Send SDG via PTT. 6 Press the PTT button to send the information. Starting a Call by Sending Information 1 From Contacts or the recent calls list, scroll to or select the entry you want to send. 2 Press m. 3 Select Send via PTT. 4 Use the keypad to enter the Private ID you want to send. -or-

Press A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 5 When Ready to Send appears on the display, press the PTT button to send the information. Receiving My Info or Contact Information When you receive My Info or contact information from another phone, an icon appears on the display:

j My Info. d Contact information. To view the information while still in the Private call:

1 Press m. Sending My Info and Contact Information 2 Select View Contact. You can also view My Info from other phones on the recent calls list. See Recent Calls on page 36. 118 My Info My Info lets you view information about your phone. Depending on your service provider, you may also be able to send this information to other phones. Viewing My Info 1 From the main menu, select My Info. 2 Scroll to see the entire screen. The My Info screen contains:

My Name You can enter your name here.

Line 1 and Line 2 your phone numbers for phone lines 1 and 2. Each number appears when you receive your first call on that line.

Private Your Private ID is the number that others use to contact you using Private calls. This number appears when you receive your first Private call.

Group ID the number of the Talkgroup you have joined.

Carrier IP the IP address assigned to your service provider. This number appears when you register for packet data services. 119 IP1 Address and IP2 Address the IP addresses you use to access the Internet with your phone.

Circuit Data the number you use if you want to use your phone to transfer circuit data. See Using Your Phone as a Modem on page 59. You receive this number from your service provider. Note: If you request equipment-related transactions on your account, your service provider may require you to provide specific information about your phone. By pressing m anytime while in My Info, a submenu will appear that includes your phone's service status, unit information, and phone identification numbers including IMEI, SIM ID, and Serial Number (SN). Please be prepared to supply the representative with this information when requesting these types of transactions. Editing My Info To edit My Info to enter or change the text that appears in My Name:

1 From the main menu, select My Info. 2 Press A under Edit. 3 Select Name.

4 Enter the name you want to appear. See Entering Text on page 75. When you are finished, press O. You can also edit the information in Line 1, Line 2, and Circuit Data, but your changes are only temporary. The next time your phone registers on the network, your actual phone numbers and circuit data number appear again in My Info. Setting Sending Options Note: This feature may not be offered by your service provider. Your phone can send information in My Info to other phones that have this capability. You can control what portion of the information in My Info is sent and whether it is sent automatically in every Private call or only when you choose to send it. Information Sent The information your phone sends always includes My Name and Private. Line 1, Line 2, Carrier IP, and Circuit Data may also be sent, depending on the options provided by your service provider and how you set your sending options. Setting Sending Options To change which fields are sent:

1 From the main menu, select My Info. 2 Press m. 3 Select Send My Info Setup > Info to Send. 4 A checkmark appears next to the fields that will be sent. To add or remove the checkmark, select the field. 5 When you are finished, press A under Done. Automatic Sending To control whether your information is sent automatically:

1 From the main menu, select My Info. 2 Press m. 3 Select Send My Info Setup > Auto Send. 4 To set your information to be sent automatically, set this option to On. -or-

To set your information to be sent only when you choose to send it, set this option to Off. 120 Datebook Datebook stores up to 250 events. You can store events over a 13 month period 12 months after and 1 month before the current date. A Datebook event contains:

A subject A name you assign to the event. You can also enter a phone number, Private ID, or Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event.

A location The location of the event. You can also enter a phone number, Private ID, or Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event.

A start time The start time automatically assigned to an event is the beginning of the day. You can change the start time, or assign no start time, before storing the event.

A duration The length of time the event lasts.

A date The date automatically assigned to an event is the date that was highlighted or selected when you began creating the event. You can change this date before storing the event. 121

A repeat lets you store the event as a recurring event.

A reminder If an event has a start time, you can set Datebook to remind you that the event is going to start. a ring tone for the reminder a profile that your phone is switched to while the event is occurring a Java application that starts when the event starts Only the subject and date are required. Viewing Datebook To access Datebook:

From the main menu, select Datebook. You can view Datebook by the day, by the week, or by the month. You can also view the details of any event. In day view, brief information about each event for that day appears. In week view, events appear as markers corresponding to their times. In month view, days with events appear with a marker in the corner.

To view an event:

1 Select the day the event occurs. 2 Select the event. To change the current view:

1 While viewing Datebook, press m. 2 Select the view you want. Navigating Datebook To scroll through Datebook:

Scroll left and right using the navigation key. -or-

In week view and month view, press * or #. To see more in day view:

Scroll up and down using the navigation key. To highlight a day in month view:

Enter the date using the keypad. To go to todays date:

1 While viewing Datebook, press m. 2 Select Go To Today. To go to any date in Datebook:

1 While viewing Datebook, press m. 2 Select Go To Date. 3 Select the date you want. Creating Events Creating Events Every Datebook event must have a subject and be stored to a date. Other information is optional. You may enter the information in any order by scrolling through the event details. After you have entered the information you want, you can press A under Done to store the event to Datebook. If you decide you do not want to store the event:

Press A under Cancel. To create a Datebook event:

1 While viewing Datebook, press A under New.

-or-

In day view, select [New Event]. 2 To assign a subject to the event:

Select Subject. Enter the name. -or-

Press A under Browse to choose from common event names. -or-

Enter a phone number, Private ID, or Talkgroup number. After the event is stored, you can call this number. When you are finished, press O. 122 Datebook 3 If you want to assign a location to the event:

Enter the date you want. Select Location. Enter the location. -or-

Enter a phone number, Private ID, or Talkgroup number. After the event is stored, you can call this number. When you are finished, press O. 4 The start time automatically assigned to an event is the beginning of the day. If you want to change the start time or assign no start time:

Select Start. Enter the start time you want. -or-

Press A under No Time to assign no start time. 5 If you want to assign a duration to the event:

Select Duration. Select the duration you want. -or-

Select Custom to enter a duration. 6 The date automatically assigned to an event is the date that was highlighted or selected when you began creating the event. To change the date of the event:

Select Date. 123 7 If you want to make the event a recurring event:

Select Repeat. Select the repeat cycle you want. If the event occurs more than once a week:

Select Multiple Day. Select the days you want. Press A under Done. Select End. Select the date you want this event to stop recurring. 8 If you want to create a reminder for this event:

Select Reminder. Select the reminder time you want. -or-

Select Custom to enter a reminder time. Note: If an event has no start time, you cannot create a reminder for it. 9 If you have entered all the information you want for this event, press A under Done. -or-

If you want to assign a ring tone, a profile, or a Java application to the event, see Assigning More Options on page 124. Assigning More Options To assign more options before storing an event:

1 If you have created a reminder for the event and want to set the ring tone for that reminder:

Select Ring Tone. Select the ring tone you want from the ring tones stored in your phone. 2 If you want to assign a profile that your phone is switched to while the event is occurring:

Select Profile. Select the profile you want from the profiles stored in your phone. Your phone switches to this profile when the event starts and switches back to the previous profile when the event ends. 3 If you want to assign a Java application to start when the event starts:

Select App. Select the application you want from the Java applications stored in your phone. If you created a reminder for this event, your phone prompts you to start the Java application when you get the reminder. Editing Events Editing Events To change the details of an event:

1 Select the day the event occurs. 2 Select the event. 3 Press A under Edit. 4 Follow the applicable instructions in Creating Events on page 122 to edit the various fields. To copy an event to another date:

1 Select the day the event occurs. 2 Select the event. 3 Press m. 4 Select Copy. 5 Press A under Yes to confirm. 6 Enter the date you want. 7 Press O. 8 If you want to change more information, follow the applicable instructions in Creating Events on page 122 to edit the various fields. Deleting Events 1 Select the day the event occurs. 2 Select the event. 3 Press m. 4 Select Delete. 124 Datebook 5 If the event is not a recurring event, press O or press A under Yes to confirm. -or-

If the event is a recurring event:

Select This Event Only to delete only the event selected in step 2. Select Repeat Event to delete all occurrences of the event. Receiving Reminders If you created a reminder for a Datebook event, when the reminder time occurs, your phone notifies you with text on the display and a reminder tone. To view more details about the event:

Open the flip. -or-

Press A under View. To dismiss the reminder:

If the flip is closed, press .. -or-

If the flip is open, press O, press A under Dismiss, or close the flip. 125 For Events with Java Applications If you assigned a Java application to start when the event starts, you can start the application when you get the reminder. 1 Press m. 2 Select Launch. Making Calls From Datebook and Datebook Reminders If you stored a phone number, Private ID, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from Datebook or from the reminder of that event. If you store numbers in both the Subject and Location fields, you can call or send a call alert to the number stored in Subject and the number stored in Location as long as the number stored in Subject is a Private or Talkgroup number and the number stored in Location is a phone number. If both are the same type of number, the number in Subject is called or sent a call alert. To call or send a call alert to the number stored in Location, you must delete the number stored in Subject. Making Calls from Datebook To make a phone call:

1 Highlight or select the event containing the number you want to call. 2 Press s. -or-

Press m. Select Call # in Event. To make a Private call or Talkgroup call:

1 Highlight or select the event containing the number you want to call. 2 Press and hold the PTT button on the side of your phone. -or-

If you did not include a # before the Talkgroup you want to call: Press m. Select Talkgroup. Press the PTT button. To send a call alert:

1 Highlight or select the event containing the number you want to call or send a call alert to. 2 Press m. Select Alert # in Event. Press the PTT button. Making Calls from Datebook Reminders To make a phone call:

Press s. -or-

Customizing Datebook Setup Press m. Select Call # in Event. To make a Private call or Talkgroup call:

Press the PTT button. -or-

If you did not include a # before the Talkgroup you want to call: Press m. Select Talkgroup. Press the PTT button. To send a call alert:

Press m. Select Alert # in Event. Press the PTT button. Customizing Datebook Setup To access Datebook set up options:

1 From the main menu, select Datebook. 2 Press m. 3 Select Setup. You can view or change these options:

Start View sets Datebook to start in day view, week view, or month view when you access Datebook.

Daily Begin sets the beginning of your day. This is the earliest time of day displayed in week view, if you have a 12-hour day view. 126 Datebook

Delete After sets the amount of time Datebook waits to delete an event after it occurs.

Time Shift lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone.

Alert Timeout sets the amount of time a tone continues to sound when you receive a Datebook reminder.

Clock controls whether the time and date appear on the idle screen; sets time and date format; sets year. 127 Java Applications Your phone arrives with Java applications preloaded. These preloaded applications autoinstall the first time you open them. You can download and install more Java applications. Note: Using Java applications may cause your phone to use up more battery power than other uses of your phone. Installing Applications 1 From the main menu, select Java Apps. 2 Select the application or suite of applications you want to install. Installation messages appear as the application installs. 3 If you want to create a shortcut to the Java application on the main menu: Press A under Next. Press A under Yes. Press O. 4 Press A under Done. Running Applications To run an application that has a shortcut on the main menu:

1 From the main menu, select the application or suite of applications you want to run. 2 If you have selected a suite of applications, select the application you want to run. To run an application that does not have a shortcut on the main menu:

1 From the main menu, select Java Apps. 2 Select the application or suite of applications you want to run. 3 If you have selected a suite of applications, select the application you want to run. Tip: If you do not hear the sounds associated with the Java application, select Settings >

Volume and check the volumes of Java Speaker and Java Earpiece. Suspending Applications When you suspend an application, it does not stop running. It goes to the background so that you can run another application in the foreground. To suspend an application:

Press e or close the flip. 128 Java Applications To view your suspended applications:

From the Java menu, select Suspended Apps. You can have up to 3 applications running at one time 1 running in the foreground and 2 in the background. Resuming Applications You can resume a suspended application at any time. This brings it to the foreground. 1 From the Java menu, select Suspended Apps. 2 Select the application you want to resume. Ending Applications To end an application:

1 From the main menu, select Java Apps. 2 If the application you want to end is part of a suite of applications, select the suite. 3 Scroll to the application you want to end. Press A under End. -or-

If End is not one of your options: Press m. Select End. Tip: You can also end applications from the Suspended Apps screen. 129 To end all applications:

1 From the main menu, select Java Apps. 2 Scroll to Suspended Apps. 3 Press m. 4 Select End All. 5 Press O or press A under Yes to confirm. 6 If you want to end all applications without letting them exit, press A under EndNow. Downloading Applications If you want to run more Java applications, you can download them into your phone. For a selection of Java applications and downloading instructions, please contact your service provider. About DRM Java Applications Your phone supports gifting and Tell-A-Friend services for DRM Java applications. However, these services may not be offered by your service provider. Please contact your service provider for more information about these services. For more information about DRM items, see Digital Rights Management on page 110. Deleting Applications Note: Under certain conditions, some DRM vendors will not charge you if you download an item multiple times within a given time frame. Please contact the DRM vendor to learn more about their download regulations. To delete an application:

1 From the main menu, select Java Apps. 2 Scroll to the application you want to delete. 3 Press m. 4 Select Deinstall. 5 Press O or press A under Yes to confirm. 6 When your phone has finished deleting the application, press A under Done. To delete all Java applications:

1 From the main menu, select Java Apps. 2 Scroll to Java System. 3 Press m. 4 Select Delete All. 5 Press O or press A under Yes to confirm. Deleting Applications Managing Memory To view the amount of memory available for Java applications:

1 From the main menu, select Java Apps > Java System. 2 Press A under Next. 3 To see more memory information, press A under Next again. Deleting Java applications frees memory. Note: Java application data is stored in your phone using the same memory space used to store messages, voice records, and items accessible through the media center that are stored in your phones memory. Deleting or moving some of these other items frees memory for Java applications. Shortcuts on the Main Menu When you install an application, you can create a shortcut to the application on the main menu. 130 Java Applications To create a shortcut to an application that is already installed:

1 From the main menu, select Settings >

Personalize > Menu Options > Add/Remove Apps. -or-

From the main menu: Press m. Select Main Menu Setup > Add/Remove Apps. 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3 Scroll to the application you want to create a shortcut for. 4 Press O. 5 Press A under Done. To remove a shortcut:

1 From the main menu, select Settings >

Personalize > Menu Options > Add/Remove Apps. -or-

From the main menu: Press m. Select Main Menu Setup > Add/Remove Apps. 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3 Scroll to the application you want to remove the shortcut for. 131 4 Press O. 5 Press A under Done. Java Applications and GPS Enabled Some Java applications can make use of your phones GPS feature to determine the approximate geographical location of your phone. (See GPS Enabled on page 142 for more information on the GPS feature.) However, for privacy reasons, you may not always want Java applications to access the location of your phone. Your phone protects your privacy by giving you the option to block all or some Java applications from accessing the location of your phone. Setting Privacy for All Java Applications These options control the privacy of all Java applications on your phone:

Restricted No Java or similar software applications may access the location of your phone. However, location information may still be available to the phones owner, fleet manager, or account administrator.

Unrestricted All Java applications may access the location of your phone, without notifying you.

By Permission When a Java application attempts to access the location of your phone, you are prompted to give permission. However, location information may still be available to the phones owner, fleet manager, or account administrator. See Setting Privacy Options on page 148 for information on choosing these options. Granting or Denying Permission If you choose By Permission, you must grant or deny each Java application access to the location of your phone when the application requests access for the first time. You may be required to grant or deny subsequent requests from the same application, depending on the privacy setting you choose for the individual Java application (see Setting Privacy for Each Java Application on page 133). When a Java application requests access to the location of your phone, a screen appears informing you. Java Applications and GPS Enabled To deny this request:

1 Press A under Deny. The application does not access the location of your phone. 2 Select the denying option you want:

Always If the application requests access to the location of your phone again, the request is denied without notifying you.

For this session If the application requests access to the location of your phone again before you power off your phone, the request is denied without notifying you.

Only Once If the application requests access to the location of your phone again, you are prompted to grant or deny permission. To grant this request:

1 Press A under Grant. The application accesses your phones location. 2 Select the granting option you want:

Always If the application requests access to the location of your phone again, the request is granted without notifying you.

For this session If the application requests access to the location of your phone again before you power off your phone, the request is granted without notifying you. 132

Never When the application requests access to the location of your phone, the request is denied without notifying you. Java Applications

Only Once If the application requests access to the location of your phone again, you are prompted to grant or deny permission. Setting Privacy for Each Java Application After a given Java application requests access to the location of your phone for the first time, you have the opportunity to set the GPS privacy options for that Java application. 1 From the main menu, select Java Apps. 2 Scroll to the application or suite of applications you want to set the privacy options for. 3 Press m. 4 Select Permissions. 5 Select the privacy options you want for this application:

Always The application always has permission to access the location of your phone, without notifying you.

Ask When the application requests access to the location of your phone, you are prompted to grant or deny permission (see Granting or Denying Permission on page 132). 133 Bluetooth Your i870 phone is a Bluetooth device. Bluetooth devices create seamless voice and data connections with other Bluetooth devices, such as another Bluetooth phone, a Bluetooth pen, headset, or desktop adapter. These connections are made wirelessly. You can use your i870 phone to send information such as Contacts entries, Datebook events, and pictures to another Bluetooth device. Devices must be within 32 feet (10 meters) of your phone to be recognized. Note: This measurement represents optimal conditions. Actual conditions may require you to position your phone closer. You can only connect your phone to one device at a time. Understanding Bluetooth Access Settings Understanding Bluetooth Access Settings A Bluetooth device can have either automatic or ask security access. The first time a Bluetooth device connects to your i870 phone, you must grant the device permission to connect. You can then change the access setting of the device to either automatic or ask. If you set a device to automatic, then that device can connect automatically to your phone when it is in range. If you set a device to ask, then that device must request permission before it can connect to your phone. Devices are automatically granted permission during the 10 seconds after bonding. For more information about bonding, see Bluetooth Bonds on page 137. The default for hands free devices, such as Bluetooth headsets, is automatic. Setting Your Phone for Bluetooth You can configure the following aspects of Bluetooth:

Power 134 Bluetooth

Device name

Voice recognition and dialing

Find Me duration Turning Bluetooth On or Off You can turn power to your phones Bluetooth feature on or off. While Bluetooth power is on, your phone can communicate with other devices. You can turn off Bluetooth if you want to prolong battery life or you enter an area where Bluetooth is prohibited. The default setting is Off. 1 From the main menu, select Bluetooth > Setup

> Power. 2 Select the setting you want. Renaming Your Phone Bluetooth devices are listed by their Bluetooth addresses unless you name them. Your i870 phone comes with a default device name of Motorola Phone. Renaming your i870 phone with a unique device name makes it easier for you to distinguish your phone from other Bluetooth devices. 1 From the main menu, select Bluetooth > Setup

> Name. 135 2 Enter the name you want for your phone. 3 Press O. Setting Voice Dialing Some Bluetooth devices use voice dialing. When you receive your phone, Bluetooth voice dialing is turned off. To activate voice dialing for Bluetooth:

1 From the main menu, select Bluetooth > Setup

> Voice Dial. 2 Select the setting you want. Setting a Find Me Duration You can change how long your phone remains discoverable to other devices. The default duration is 1 minute. See Sharing Your Phones Bluetooth Address on page 136. To select a default duration for Find Me:

1 From the main menu, select Bluetooth > Setup

> Find Me Duration. 2 Select the setting you want. Accessing Bluetooth From the main menu, select Bluetooth. -or-

While in a call, press m. Select Use Bluetooth. Note: If Bluetooth power is set to Off on your phone, you will be prompted to temporarily turn power on in order to use Bluetooth. Making a Bluetooth Connection The following sections cover how to connect your phone to another Bluetooth device. Note: Some Bluetooth devices only have full functionality when DTMF dialing is set to On. See Phone Calls Features on page 158. Sharing Your Phones Bluetooth Address To bond with your phone, devices must have your phones Bluetooth address. To find devices that you want to bond with, you can make your phone discoverable, so that other devices learn your phones Bluetooth address. You can also have your phone search for Bluetooth devices to learn their addresses. Allowing Bluetooth Devices to Find Your Phone To let devices find your phone and its Bluetooth address, place your phone in discoverable mode. Making a Bluetooth Connection Discoverable mode lasts for the duration selected under Find Me Duration in the Bluetooth Setup menu. During this time, other devices that are within range can detect your phone. You can then choose to grant or deny each devices request to bond. Note: You must grant the devices request in order to receive information from the device on your phone. To start discoverable mode, from the main menu, select Bluetooth > Find Me. Discovering Bluetooth Devices To have your phone search for Bluetooth devices:

From the main menu, select Bluetooth > Hands Free > [Find Devices]. A list of hands free devices displays. Devices that do not have a name are listed by their Bluetooth address. To stop the search and go to the list of found devices, press A under Stop. To stop the search and return to the previous screen, press A under Cancel. 136 Bluetooth Bluetooth Bonds A bond is an encryption key that is generated when two Bluetooth devices exchange a common PIN. This key verifies the identity of each device, and encrypts any data transferred between the devices. Once the PIN is exchanged, the devices do not have to be in discoverable mode in order to exchange information. You only need to create a bond once between two devices. If you search for devices and you select a device that you are currently bonded with from the list of found devices, then the current bond with that device will be voided. You will have to re-establish the bond. Your i870 requires that you create a bond in order to connect with another device. However, you can choose to establish bonds with devices without connecting. Note: Devices are automatically granted permission during the 10 seconds after bonding. Bluetooth PINs Bluetooth devices exchange PINs in order to establish encrypted transfers between them. When prompted, enter the Bluetooth PINs. 137 Some Bluetooth devices ship with Bluetooth PINs. Please refer to your Bluetooth devices user guide to locate this information. If a device ships without a Bluetooth PIN, then you can enter any PIN for that device. To establish a connection to that device, enter the same PIN for both your phone and the device. For example, if you enter 1234 as the devices PIN, then enter 1234 as your phones PIN. To create a bond between your phone and another device:

1 From the main menu, select Bluetooth. 2 If you want to create a bond and connect with the given device, select Hands Free > [Find Devices]. -or-

If you want to create a bond to have it available for future use, select Link to Devices. 3 Select the device you want. 4 Enter a PIN. 5 Press A under Done. 6 If necessary, enter the same PIN for the other device. 7 Select Bond. Connecting to a Stored Device If you have previously connected to a device, the device will be stored on your phone so you can connect with it easily. 1 From the main menu, select Bluetooth > Hands Free. 2 Select the device you want to connect to. 3 If prompted whether you want to bond with the device, press A under Yes. 4 If prompted, enter the Bluetooth PIN. Your phone will connect to the device. Using Bluetooth During a Call During a call, you can connect with available Bluetooth devices. Note: If the Hands Free menu contains only one device, then your phone will automatically try to connect to that device. 1 While in a call, press m. Select Use Bluetooth. 2 Select the device you want to connect to. Disconnecting from a Device To disconnect from a device:

1 From the main menu, select Bluetooth >

Hands Free. Setting Device Details 2 Press O. 3 Press A under Drop. Note: Pressing A under No when prompted exits the menu without disconnecting the device. 4 Press A under Yes. Setting Device Details The device history stores a list of up to 20 devices that have connected with your phone. To view the device history, from the main menu, select Bluetooth > Device History. From the device history, you can:

Edit device names

Change device access settings

Delete devices Note: If you delete a device from device history, you will have to find the device to connect with it. See Discovering Bluetooth Devices on page 136. 138 Bluetooth Viewing Device Details To view the name and the access setting of a device:

1 From the main menu, select Bluetooth >

Device History. 2 Select the device you want. Editing Device Names You can edit a device name so the device is easier to identify. 1 From the main menu, select Bluetooth >

Device History. 2 Scroll to the device you want to rename. 3 Press A under Edit or press O. 4 Select Name. 5 Enter the new name. Note: A device name can have a maximum of 40 characters. 6 Press O. Editing Device Access Settings 1 From the main menu, select Bluetooth >

Device History. 2 Scroll to the device you want to set access for. 3 Press A under Edit or press O. 139 4 Select Access. 5 Select the setting you want. Deleting Devices 1 From the main menu, select Bluetooth >

Device History. 2 Scroll to the device you want to delete. 3 Press m. 4 Select Delete. 5 To delete the device, press O. Sending Contacts, Datebook Events and Pictures Bluetooth lets you send Contact entries, Datebook events, or pictures you have stored in the media center to connected devices. Sending Contacts 1 From the main menu, select Contacts. -or-

From the idle screen, press A under Contacts. 2 Highlight the contact you want to send. 3 Press m. 4 Select Transfer. 5 Select Bluetooth. 6 Select the device you want to transfer to. -or-

Search for the device you want to transfer to by selecting [Find Devices]. 7 If prompted, bond with the device. Your phone connects to the device and transfers the contact. Sending Datebook Events 1 From the main menu, select Datebook. 2 Highlight the event you want to send. 3 Press m. 4 Select Transfer. 5 If the event you select repeats, then you will be prompted to choose whether to send the selected instance of the event or all instances of the event. To send only the selected instance of the event, select This Event Only. -or-

To send all instances of the event, select Repeat Events. 6 Select Bluetooth. 7 Select the device you want to transfer to. -or-

Search for the device you want to transfer to by selecting [Find Devices]. Receiving Items 8 If prompted, bond with the device. Your phone connects to the device and transfers the event. Sending Pictures Note: You can only send pictures if they are not forward locked. 1 From the main menu, select Media Center. 2 Highlight the picture you want to send. 3 Press m. 4 Select Transfer. 5 Select Bluetooth. 6 Select the device you want to transfer to. -or-

Search for the device you want to transfer to by selecting [Find Devices]. 7 If prompted, bond with the device. Your phone connects to the device and transfers the picture. Receiving Items You receive a prompt when your phone has an incoming transfer. You must either accept or reject the transfer. 140 Bluetooth Canceling Transfers You can cancel a transfer while the transfer is in progress. Note: If a transfer is interrupted, the Connection Failed prompt displays. 1 Press A under Cancel. 2 Press A under Yes to cancel. -or-

Press A under No to continue with the transfer. Tip: If you close the flip while transferring an item, you will end the transfer. Viewing and Storing Received Items After an incoming transfer is complete, your phone translates the item. The item appears on your phones display. You can choose to either store or discard the item. Items are stored as follows:

Contact entries to Contacts

Pictures saved to the location selected for the Store Media setting

Datebook events to Datebook To store the item, press A under Store or press O. -or-

To discard an item without saving it, press A under Discard. 141 GPS Enabled Your phones GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature. For example, GPS location fixes are often difficult to obtain indoors, in covered locations, between high buildings, or in other situations where you have not established a clear broad view of the sky. Also, nearby radio and electronic equipment may block or interfere with reception from these distant satellites. SEE: IMPORTANT: Things to Keep in Mind. When you make a 911 emergency call, the GPS feature of your phone can help emergency personnel locate you if your phone has adequate access to GPS satellite signals and your emergency response center is equipped to process such information. You can also use the GPS feature to view your approximate location. Location information appears on the phones display. Java applications loaded on your phone can also request your location. If your phone is connected to a laptop computer or similar device, software running on that device can request your location. To protect your privacy, you can control whether these requests are granted. IMPORTANT: Things to Keep in Mind If you are using the GPS feature of your phone while driving, please give full attention to driving and to the road. Where adequate signals from multiple satellites are not available (usually because your GPS antenna cannot establish a view of a wide area of open sky), the GPS feature of your phone WILL NOT WORK. Such situations include but are not limited to:

In underground locations Inside of buildings, trains, or other covered vehicles

Under any other metal or concrete roof or structure

Between tall buildings or under dense tree-cover

Near a powerful radio or television tower 142

GPS Enabled

Some radios, entertainment equipment and other electronic devices may generate signals that can block or interfere with the GPS receiver ability to receive the distant satellite signals, particularly when such devices are operating in close proximity to the GPS receiver. Therefore, in a 911 call, or when otherwise using the GPS location function, always move your phone away from any such devices.

When your GPS antenna is covered (for example, by your hand or other object) or facing the ground In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Therefore, in any 911 call, always report the location to the emergency response center if you can and if you cannot, remain on your phone for as long as the emergency response center instructs you. 143 Even where adequate signals from multiple satellites are available, your GPS feature will only provide an approximate location, often within 150 feet (45 meters) but sometimes much further from your actual location. Advice on how to improve GPS performance is provided in Enhancing GPS Performance on page 146. While the GPS feature of your phone can be a valuable navigational aid, it does not replace the need for careful navigating and good judgment. Never rely solely on one device for navigation. Remember that the accuracy of the location information and the time needed to obtain it will vary depending on circumstances, particularly the ability to receive signals from adequate numbers of satellites. On emergency calls, your phone uses assistance information from the phone network to improve the speed and accuracy of your phones location calculation: if such assistance information becomes unavailable, it may reduce the speed and accuracy of the location calculation.

The satellites used by the GPS feature of your phone are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense GPS user policy and the Federal Radionavigation Plan. These changes may affect the performance of the GPS feature of your phone. Making an Emergency Call Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911. When you make an emergency 911 call, the GPS feature of your phone begins to seek information to calculate your approximate location. It will take the GPS feature of your phone some time to determine your approximate location. Even where your phone has good access to sufficient GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center. Making an Emergency Call In some cases, your local 911 emergency response center may not be equipped to receive GPS location information. For this reason, and because the GPS location information reported is only approximate or may not be available in your location (see IMPORTANT:

Things to Keep in Mind on page 142), always report your location to the 911 operator you speak to when making an emergency call, if able, just as you would when using a phone without GPS capabilities. Note: If you are concerned about whether your local 911 emergency response center is equipped to receive GPS location information, contact your local authorities. In general, if your phone has access to signals from more GPS satellites, your location will be determined faster and more accurately than if your phone has access to signals from fewer GPS satellites. If your phone does not have adequate access to GPS satellites signals, the location of the nearest cell tower in contact with your phone is automatically made available to the emergency response center, if the center has the capability to receive such information. 144 GPS Enabled See Enhancing GPS Performance on page 146 for information on how to help your phone determine your location. Viewing Your Approximate Location 1 From the main menu, select GPS > Position. 2 Scroll to view the entire screen. This displays the following information about the last time your location was calculated:

The time (as Greenwich Mean Time) and date that the location was last calculated

The approximate location, expressed as latitude and longitude

The estimated accuracy of the calculated location. This estimate of accuracy is only a very rough estimate and may vary substantially from the actual accuracy of the approximate location information reported.

The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again:

Press A under Refresh. 145 It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phones display saying your phone is scanning for satellites. For tips on getting the best location calculation, see Enhancing GPS Performance on page 146. The Position screen displays the updated information. To cancel a location calculation before it is completed:

Press A under Cancel to return to the Position screen. -or-

Press e to return to the idle screen. Each time approximate location of your phone is calculated, the latest location information is stored in your phone and remains there even when your phone is powered off. You will see this information the next time you view the Position screen. If you received a phone call or alert while attempting to determine your location, the Position screen will disappear, but your phone will continue attempting to determine its location. If it is successful, the new location information will be displayed the next time you view the Position screen. Enhancing GPS Performance

Hold your phone to enhance reception. Signals from GPS satellites are transmitted to your GPS antenna, which is in your phone antenna. Hold your phone away from your body, giving the antenna clear access to satellite signals. Do not cover the antenna area with your fingers or anything else. GPS antenna Enhancing GPS Performance Sometimes the GPS feature of your phone may be unable to complete a location calculation successfully. If this happens when you are making an emergency call, the location of the nearest cell tower in contact with your phone is made available to the appropriate emergency response center if the center has the capability to receive such information. If this happens when you are trying to view your location on the phones display, you will see a message indicating that your phone cannot access satellites. To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location:

Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.

Extend your phone antenna. 146 GPS Enabled

Move away from electronic devices. Radios, entertainment devices, and other electronic devices may generate interfering signals that may prevent GPS receiver operation if they are in close proximity to the phone. Move your phone away from such devices when using the GPS-Enabled feature.

Stand still. If possible, stand still until your phone is finished determining your location. Moving your phone at a walking pace while your phone is calculating your approximate location may substantially decrease GPS performance. In a car. When using the GPS Enabled feature in a car, position your phone so that the GPS antenna has good access to GPS signals through the cars windows. Typically, the GPS antenna has best access to GPS signals in a car when placed near a window. Note: Although moving your phone at a walking pace decreases GPS performance, moving it at the speed of a moving car does not.

Stay in network coverage. Depending on your service provider, the network will provide your phone with information that helps determine your location more quickly and accurately. 147 Updating Satellite Almanac Data Note: This feature may not be offered by your service provider. Another way to keep the GPS feature of your phone working well is to keep your satellite almanac data up to date. The United States government maintains an almanac of data about where GPS satellites are as they orbit the Earth. This information is available to your phone. Keeping your satellite almanac up to date helps your phone determine your location more quickly. The almanac contains information about the location of satellites, their operational status, and other satellite information. Keeping this information updated enhances the performance of your GPS feature. In most cases, your phone will be able to get a fix in strong satellite signal conditions with outdated almanac data, but it may take longer. Note: When you make an emergency call, your phone does not rely upon the almanac to determine your location.

If your satellite almanac data is out of date, your phone may prompt you to update it. Follow the instructions that appear on the phones display. You may be asked to go to a web site or call a customer care number. Setting Privacy Options Your phones GPS privacy options control whether Java applications on your phone or other software applications may view the location of your phone.You may set your phone to one of these GPS privacy options. Note: Privacy options do not apply to the transmission of location information during emergency 911 calls. To set your GPS privacy options:

1 From the main menu, select GPS > Privacy. 2 If your GPS PIN security feature is enabled, enter your GPS PIN. (See Setting the GPS PIN Security Feature for more information.) 3 Select the privacy option you want:

Restricted No Java or similar software applications may view the location of your phone. However, location information may still be available to the phones owner, fleet manager, or account administrator. Setting Privacy Options

Unrestricted All applications may view the location of your phone, without notifying you.

By Permission When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phones owner, fleet manager, or account administrator. Setting the GPS PIN Security Feature To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN. When you receive your phone, the GPS security feature is turned off, so you do not have to enter a GPS PIN to access your GPS privacy options. If you turn this feature on, you will be required to enter a GPS PIN to access your GPS privacy options. To turn the GPS Enabled security feature on or off:

1 From the main menu, select Settings >

Security > GPS PIN. 2 Select On or Off. 3 Enter the current GPS PIN. Note: When you receive your phone, your GPS PIN is 0000. 4 Press A under Ok. 148 GPS Enabled To change your GPS PIN:

1 From the main menu, select Settings >

Security > Change Passwords > GPS PIN. 2 Enter the current GPS PIN. Note: When you receive your phone, your GPS PIN is 0000. 3 Press A under Ok. 4 Enter the new 4- to 8-digit GPS PIN. 5 Press A under Ok. 6 Enter the new 4- to 8-digit GPS PIN to confirm. 7 Press A under Ok. Using GPS with Map Software You can use the GPS feature of your phone to provide approximate location data to a laptop computer or similar device that is running interactive map software such as that made by DeLorme or Microsoft. This way, if your phone has good access to GPS signals, your approximate position on a map can be made available as you travel in a vehicle. To do this, connect your phone to your laptop (or other device) with a data cable and set your phone to transmit data (see Getting Started on page 150). Your phone then provides your approximate location to the device running the map software, 149 which displays your location on a map. Your phone provides an updated location every second and the map software displays your changing location on its map. See Enhancing GPS Performance on page 146 for more details on obtaining good location information. Note: Because your phone is continuously determining your location, using the GPS feature of your phone with map software uses the phones battery power quickly. Software Compatibility Your phone sends location information to your laptop or other device using the standard National Marine Electronics Association (NMEA) format. Your phone supports output messages in NMEA-0183 format and supports the following NMEA-0183 sentences: GGA, GLL, GSA, GSV, RMC, and VTG. The map software running on your laptop or other device must support NMEA 3.0. Getting Started To connect your phone to your laptop or other device with a data cable:

1 Open the connector cover. Using GPS with Map Software 2 With the phones display facing up, insert the data cables connector into the accessory connector, until you hear a click. connector cover 3 Insert the data plug into the COM port of your laptop or other device. Make sure no other application is using the COM port selected. Make sure the COM port settings of your laptop or other device are set to the following:

Bits per second: 4800

Data bits: 8

Parity: None 150 GPS Enabled

Stop bits: 1

Flow control: Hardware To set your phone to send location information to your laptop or other device:

1 From the main menu, select GPS > Interface. 2 Set NMEA OUT to On. Your phone is now sending location data to your laptop or other device. To stop your phone from sending location data to your laptop or other device:

Set NMEA OUT to Off. Each time you power your phone on, NMEA OUT is automatically set to Off. 151 Voice Records A voice record is a recording you make with your phone and can play back. You can record notes to yourself when your phone is not in a call or record phone calls when your phone is in a call. Voice records created when your phone is not in a call can be accessed through the media center. See Media Center on page 92. Viewing Voice Records To view your list of voice records:

1 From the main menu, select VoiceRecord. 2 Scroll to view more voice records. Voice Records Icons One of these icons appears next to each voice record:

c A voice record made while your phone was not in a call. v A voice record made while your phone was in a call. Filtering by Voice Record Type You can set your phone to show all voice records, only voice records created when your phone was in a call, or only voice records created when your phone was not in a call. 1 From the main menu, select VoiceRecord. 2 Press m. 3 Select Filter. 4 Select the option you want:

All show all voice records. In Call show only voice records created when your phone was in a call.

Standard show only voice records created when your phone was not in a call. Tip: You can also press * or # to scroll through these options while viewing the list of voice records. Creating Voice Records Phone Not in a Call To record a note to yourself:

1 From the main menu, select VoiceRecord >

[New VoiceRec]. 152

Voice Records 2 Say the message you want to record into the microphone. 3 When you are finished recording, press O. Phone in a Call To record a phone call:

1 While on an active call, press m. 2 Select Record. 3 To stop recording and discard the voice record at any time, press A under Cancel. 4 When you are finished recording, press O. Note: Recording of phone calls is subject to applicable laws regarding privacy and recording of phone conversations. Playing Voice Records 1 From the main menu, select VoiceRecord. 2 Select the voice record you want to play. 3 To stop the voice record while it is playing, press O. 153 Labeling Voice Records When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label. 1 From the main menu, select VoiceRecord. 2 Scroll to the voice record you want to label. 3 Press A under Label. 4 Enter the label you want to assign. See Entering Text on page 75. 5 Press O. Locking Voice Records When you lock a voice record, it cannot be deleted until you unlock it. 1 From the main menu, select VoiceRecord. 2 Scroll to the voice record you want to lock or unlock. 3 Press m. 4 Select Lock to lock the message. -or-

Select Unlock to unlock the message. When a voice record is locked, this icon R appears next to it. Deleting Voice Records Deleting a voice record from the voice record list deletes it from all parts of your phone, including the media center. Deleting a Voice Record 1 From the main menu, select VoiceRecord. 2 Scroll to the unlocked voice record you want to delete. 3 Press m. 4 Select Delete. 5 Press O or A under Yes to confirm. Deleting All Voice Records 1 From the main menu, select VoiceRecord. 2 Scroll to any voice record. 3 Press m. 4 Select Delete All. 5 Press O or A under Yes to confirm. Managing Memory To view the amount of memory available for voice records:

1 From the main menu, select VoiceRecord. Deleting Voice Records 2 With [New VoiceRec] highlighted, press A under Memory. -or-

With any voice record highlighted, press m. Select Memory. To free memory by deleting all unlocked voice records:

1 From the voice records memory screen, press A under Delete. 2 Press O or A under Yes to confirm. Note: Voice records are stored in your phone using the same memory space used to store messages, Java application data, and items accessible through the media center stored in your phones memory. Deleting or moving some of these other items frees memory for voice records. 154 Customizing Your Phone Setting the Volume Of the Earpiece and Speaker 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume.

-or-

Scroll to Speaker to set the speaker volume. 3 To set the volume:

Scroll left or right. -or-

Press the volume controls. Of the Ringer Press the volume controls. Setting Your Phone to Vibrate To set your phone to vibrate instead of making a sound when you receive phone calls, Private calls, group calls, SDG calls, call alerts, message notifications, pictures sent using Send via PTT, and Datebook reminders, see Setting Your Phone to Vibrate on page 71. 155 To set your phone to vibrate instead of making a sound when you receive Private calls, group calls, and SDG calls, even if you want your phone to ring for other features:

1 From the main menu, select Settings > 2-Way Radio > Alert Type. Tip: If Alert Type does not appear: From the main menu, select Ring Tones. Make sure VibeAll is set to Off. Repeat step 1. 2 Select Vibrate to set your phone to vibrate. Tip: Select Silent in step 2 to set your phone to neither vibrate nor make a sound. Changing the Look of Your Phone Wallpaper A wallpaper is an image that appears on the idle screen. Note: If you choose a wallpaper that is stored on the memory card, that picture file is automatically moved to your phones memory. Choosing a Wallpaper 1 From the main menu, select Settings >

Display/Info > Wallpaper > Wallpaper. Note: If you do not see Wallpaper as an option, make sure Auto Cycle is set to Off. 2 Select the wallpaper you want. Tip: If you want to see what the wallpaper looks like, scroll to the wallpaper you want to view and press A under View. Setting Wallpaper to Change Automatically Note: This feature may not be offered by your service provider. 1 From the main menu, select Settings >

Display/Info > Wallpaper > Auto Cycle. 2 Select how often you want the wallpaper to change. 3 Select Select Pictures. 4 Select the pictures you want to appear as wallpaper. 5 Press A under Done. Setting Text Size To set the size of the text on the internal display:

1 From the main menu, select Settings >

Display/Info > Text Size. 2 Select the option you want:

Zoom 11 characters per line

Standard 14 characters per line Changing the Look of Your Phone

Compressed 18 characters per line To set your phone to briefly display very large digits when you enter numbers at the idle screen:

1 From the main menu, select Settings >

Display/Info > Large Dialing. 2 Set this option to Large Digits. Setting the Menu View You can set the items on your main menu and Java applications menu to appear as large icons or a list:

1 From the main menu, select Settings >

Display/Info > Menu View. -or-

From the main menu: Press m. Select Main Menu Setup > Menu View. 2 To choose a list, select List View. -or-

To choose large icons, select Icon View. Setting the Backlight A backlight lights the display and keypad when you make or receive a call, open or close the flip, or press keys or buttons. To control how long the backlight stays on:

1 From the main menu, select Settings >

Display/Info > Backlight > Timer. 156 Customizing Your Phone 2 Select the number of seconds you want the backlight to stay on. To control how long the backlight stays on for Java applications:

1 From the main menu, select Settings >

Display/Info > Backlight > Java Timer. 2 Select the number of seconds you want the backlight to stay on for Java applications. To set the keypad backlight to light up only in low light conditions:

1 From the main menu, select Settings >

Display/Info > Backlight > Sensor. 2 Set this option to On. Setting Sleep Mode Sleep mode turns off your phones display if your phone remains idle for a specified interval. Sleep mode conserves battery power. You can set your phone to enter Sleep mode after 1 minute, 3 minutes, 5 minutes, or 15 minutes of inactivity. To set the interval for Sleep mode:

1 From the main menu, select Settings >

Display/Info > Sleep Mode. 2 Select the interval you want. 157 Temporarily Turning Off Transmissions Sometimes you may want to have your phone on, but turn off its ability to make and receive calls and other transmissions. To set your phone so that it cannot make or receive phone calls, Private calls, group calls, or Talkgroup calls; or transfer data:

1 From the main menu, select Settings >

Advanced > Transmitters. 2 Set this option to Off. This icon 9 appears. Note: While powering on your phone, you can turn transmitters off by pressing p for more than 5 seconds. To restore your phones ability to do all these things:

Set this option to On. Note: When Transmitters is set to Off, your phones Bluetooth capability is disabled, and all active Bluetooth connections are dropped. Using Settings Settings contains many submenus that let you customize your phone. For information on applying groups of settings to your phone together, see Profiles on page 162. Display/Info Features The Display/Info menu controls how the keypad and display appear:

Wallpaper changes the wallpaper that appears on the idle screen.

Text Size sets the size of text on the display.

Theme changes the look of the display.

Home Icons controls whether main menu icons appear on the idle screen.

Sleep Mode controls the interval that elapses before your phone enters Sleep mode.

Backlight controls backlight illumination.

Clock controls whether the time and date appear on the idle screen; sets time and date format; sets year.

Menu View controls whether the items on your main menu and Java applications menu appear as large icons or a list. Using Settings

Large Dialing sets large digits to appear on the idle screen when you enter a number.

Language sets the language that your phone displays. Phone Calls Features The Phone Calls menu controls how your phone handles phone calls:

Set Line sets phone line 1 or phone line 2 as the active line for outgoing calls.

Any Key Ans If this feature is on, you can answer calls by pressing any key on the keypad.

Auto Redial sets your phone to automatically redial calls you make when the system is busy.

Call Waiting See Call Waiting on page 54.

Auto Ans sets your phone to automatically answer an incoming call after a specified number of rings. When this feature is on, the phone answers by connecting you to the caller;

it does not send the call to voice mail, unless you are out of coverage or on the line.

Flip Activation See Setting Flip Actions on page 58.

Minute Beep causes a beep to sound every minute of an active call. 158 Customizing Your Phone

Call Duration causes the duration of a call to appear on the display when the call ends.

Hearing Aid sets your phone for use with a hearing aid. Set to Microphone for most hearing aids; set to Telecoil for telecoil hearing aids. This setting effects only sounds from the phones earpiece.

TTY See Making TTY Calls on page 60.

Notifications See Message Notifications on page 78. 2-Way Radio Features The 2-Way Radio menu controls how your phone handles Private calls, group calls, and SDG calls:

Tkgrp Silent controls whether you hear group calls to your Talkgroup. See Group Calls on page 63.

Tkgrp Area lets you define your Talkgroup area.

One Touch PTT See Setting Flip Actions on page 58.

Alert Type controls how your phone notifies you when you receive Private calls, group calls, and SDG calls.

PTT Picture sets your phones ability to send and receive pictures in Private calls. See Using Send via PTT on page 114. 159 Personalize Features The Personalize menu makes main menu items easier to access.

Menu Options Reorder Menu lets you change the order of the items on the main menu by grabbing and moving them; Add/Remove Apps lets you create a shortcut to a Java application on the main menu.

Up Key sets the main menu item you access when you scroll up from the idle screen.

Down Key sets the main menu item you access when you scroll down from the idle screen.

Left Key sets the main menu item you access when you scroll left from the idle screen.

Right Key sets the main menu item you access when you scroll right from the idle screen.

Center Key sets the main menu item you access when you press O from the idle screen.

Left Softkey sets the main menu item you access when you press the left option key from the idle screen.

Right Softkey sets the main menu item you access when you press the right option key from the idle screen.

Power Up sets the main menu item you see when you power on your phone. To set the idle screen to be the first thing you see when you power on your phone, select Default Ready. Volume Features The Volume menu sets the volume of sounds your phone makes:

Line 1 sets ringer volume for phone line 1.

Line 2 sets ringer volume for phone line 2.

Messages sets the volume of message notifications and Datebook reminders.

Earpiece sets the volume of sound coming out of the earpiece.

Speaker sets the volume of sound coming out of the speaker.

Keypad sets the volume of sound associated with pressing keys and buttons.

Java Earpiece sets the volume of sound associated with Java applications coming out of the earpiece.

Java Speaker sets the volume of sound associated with Java applications coming out of the speaker.

Data sets the volume of sounds that notify you that you are receiving a circuit data call. Using Settings Security Features The Security menu lets you turn security features on and off and change passwords:

Phone Lock turns on a feature that locks your phone: Lock Now takes effect immediately;

Auto Lock takes effect when your phone is powered off and then on. An unlock code is required to enable this feature, to unlock the phone, and to set a new unlock code. Contact your service provider for your default unlock code.

Keypad Lock locks the phones keypad, either immediately or automatically after a set period of inactivity.

SIM PIN enables and disables your phones SIM PIN security feature. See Turning the PIN Requirement On and Off on page 18.

GPS PIN enables and disables your phones GPS PIN security feature. See Setting the GPS PIN Security Feature on page 148.

Change Passwords changes your phone unlock code, security code, SIM PIN, and GPS PIN. 160

Return to Home After Phone controls how long the recent calls list displays after phone calls; After Prvt controls how long the recent calls list displays after Private calls.

Transmitters prevents your phone from making or receiving phone calls, Private calls, group calls, or SDG calls; or transferring data.

Phone Only prevents your phone from making or receiving Private calls, group calls, or SDG calls; or transferring data. Note: This feature may not be offered by your service provider.

Baud Rate sets the baud rate at which your phone communicates with a laptop computer, PC, or similar device. Customizing Your Phone Advanced Features The Advanced menu contains advanced and rarely used Settings features.

Alert Timeout sets the amount of time a tone continues to sound when you receive a message notification, call alert, or Datebook reminder.

Headset/Spkr sets headset option. See Using a Headset on page 169.

Memory Card Remove Card enables you to safely remove the memory card from the phone;

Store Media controls whether pictures, videos, and audio files are saved to the phones memory or to the memory card.

Connectivity Network ID sets the phones network IDs and their roaming options under the direction of your service provider; Master Reset lets your service provider reset your service in the event of a security or provisioning problem.

Reset Defaults Reset Settings returns all settings to their original defaults; Reset All returns all settings to their original defaults and erases all stored lists. Use only under the direction of your service provider. 161 Profiles A profile is a group of settings saved together so that you can apply them to your phone easily. A profile contains these settings:

Ring Tones sets all options described in Ring Tones on page 71, except assigning ring tones to Contacts.

Display/Info sets Wallpaper, Theme, Text Size, and Backlight options. See Display/Info Features on page 158.

Phone Calls sets Set Line and Auto Answer options. See Phone Calls Features on page 158.

Volume sets all options described in Volume Features on page 160.

Call Filter controls which calls, call alerts, and message notifications your phone responds to. See Setting Call Filtering on page 165.

Advanced sets headset option. See Using a Headset on page 169. Your phone arrives with preset profiles. You can also create your own profiles. Viewing Profiles To view the profiles stored in your phone:

1 From the main menu, select Profiles. 2 Scroll to the profile you want to view. Tip: The profile that is currently in effect on your phone has a checkmark next to it. 3 Press A under View. 4 Scroll to view settings. Switching Profiles To apply a profile to your phone:

1 From the main menu, select Profiles. 2 Scroll to the profile you want to apply. 3 Press O. The profile you selected is now in effect. How Changing Settings Affects Profiles Many of the settings contained in profiles can be set without switching or editing profiles for example, by selecting Settings or Ring Tones to set options, or by setting the volume of the phones ring using the volume controls. 162 Profiles When you do this, your phone either:

Updates the profile in effect to reflect these changes, without notifying you -or-

Creates a temporary profile that contains these changes Note: This feature may not be offered by your service provider. To set your phone to create a temporary profile that contains changes you make to settings:

1 From the main menu, select Profiles. 2 Press m. 3 Select Setup > Temp Profile. 4 Set this option to On. To set your phone to update the profile in effect to reflect any changes you make to settings:

Set Temp Profile to Off in step 4. If your service provider does not offer the Temp Profile option, your phone always updates the profile in effect to reflect the changes you make to settings. 163 Temporary Profiles If your phone is set to create temporary profiles, a temporary profile is created when you make changes to settings without switching or editing profiles. A temporary profile is based on the profile in effect when you made the changes, but reflects the changed settings. Making more changes further updates the temporary profile, for as long as it is in effect. A temporary profile stays in effect until you switch profiles, power off your phone, or delete it (or the profile it is based on) from the list of profiles. If you do not store a temporary profile, it is deleted when you switch profiles, switch between MOTOtalk and network mode, or power off your phone. A temporary profile is automatically given the same name as the profile it is based on, but with an asterisk (*) in front of it. When you view a temporary profiles settings, the options that differ from the profile it is based on have an asterisk in front of them. Storing a Temporary Profile To store a temporary profile as a new profile:

1 From the main menu, select Profiles. 2 Scroll to the temporary profile. 3 Press m. 4 Select Store As New. 5 Enter the name you want to give the profile. When you are finished, press O. To overwrite the profile the temporary profile is based on:

1 From the main menu, select Profiles. 2 Scroll to the temporary profile. 3 Press m. 4 Select Store Changes. The temporary profile is stored with the name of the profile it is based on. The profile it is based on, as it existed before you made changes to settings, is gone. Creating Profiles 1 From the main menu, select Profiles. 2 Select [New Profile]. -or-

Scroll to any profile. Press m. Select New. Creating Profiles 3 Enter the name you want to give the profile. When you are finished, press O. 4 If you want to base this profile on an existing profile: Select Copy from. Select the profile you want to base this profile on. If you do not choose a profile to copy from, the new profile is based on a default profile. 5 Press A under Create. 6 Scroll through the list of options and set their values. 7 Press A under Done. Editing Profiles 1 From the main menu, select Profiles. 2 Scroll to the profile you want to edit. 3 Press m. 4 Select Edit. 5 Scroll through the list of options and set their values. Deleting Profiles To delete a profile:

1 From the main menu, select Profiles. 2 Select the profile you want to delete. 164 Profiles Note: A temporary profile is automatically deleted when the profile it is based on is deleted. 3 Press m. 4 Select Delete. 5 Press O or press A under Yes to confirm. To delete all profiles:

1 From the main menu, select Profiles. 2 Press m. 3 Select Delete All. 4 Press O or press A under Yes to confirm. Setting Call Filtering The call filtering setting in each profile lets you control which calls, call alerts, and message notifications your phone notifies you of, and which it ignores. To set call filtering:

1 While setting options for a profile, select Call Filter. 2 To set filtering options for phone calls, select Phone.

Off sets your phone to notify you of all phone calls.

All sets your phone to ignore all phone calls. 165

All Contacts sets your phone to notify you only of phone calls from numbers stored in Contacts.

Some Contacts sets your phone to notify you only of phone calls from numbers you select from Contacts. 3 If you set the Phone option to Some Contacts, select up to 5 Contacts entries that contain phone numbers you want to be notified of calls from. When you are finished, press A under Done. 4 To set filtering options for Private calls and group calls, select Prvt/Grp.

Off sets your phone to notify you of all Private calls and group calls.

On sets your phone to ignore all Private calls and group calls. 5 To set filtering options for SDG calls, select SDGC.

Off sets your phone to notify you of all SDG calls.

On sets your phone to ignore all SDG calls. 6 To set filtering options for call alerts, select Alerts.

Off sets your phone to notify you of all call alerts.

On sets your phone to ignore all call alerts. 7 To set filtering options for message notifications, select Notifications.

Off sets your phone to notify you of all messages.

Voice Messages sets your phone not to sound a tone or vibrate when you receive voice messages.

Text Messages sets your phone not to sound a tone or vibrate when you receive text messages.

All sets your phone not to sound a tone or vibrate when you receive any message. Note: When you receive a type of message you have set not to sound a tone or vibrate, the message notification screen appears as usual. 8 Press A under Done. Setting Call Filtering 166 Shortcuts Shortcuts lets you access most menu options by pressing a number on your keypad (1 through 9) or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. Creating a Shortcut Note: When you receive your phone, all number keys may already be assigned to shortcuts. If this is the case, you can create new shortcuts by deleting or replacing existing shortcuts. 1 Go to the menu item you want to create a shortcut for. For example, if you want to create a shortcut to the screen for creating a new Contacts entry:

From the main menu, select Contacts, then highlight [New Contact]. 2 Press and hold m until a confirmation screen appears. 3 Press O or press A under Yes. 4 Select Key. 5 Press the number key you want to assign to the shortcut. 167 6 Press O. 7 If you want to record a voice name for the shortcut: Select Voice. As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone. 8 Press A under Done. 9 If the number key you chose is already assigned to a shortcut, a prompt appears asking if you want to replace the existing shortcut. Press A under Yes to replace the existing shortcut. -or-

Press A under No if you want to keep the existing shortcut and assign another number key to the shortcut. Using a Shortcut If you know the shortcut number:

1 From the idle screen, press m. 2 On your keypad, press the number assigned to the shortcut. If you do not know the shortcut number:

1 From the main menu, select Shortcuts. 2 Scroll to the shortcut you want to use. -or-

If you assigned a voice name to the shortcut:

Press and hold t. Say the voice name into your phone. The shortcut with that voice name is then highlighted. 3 Press O. Editing a Shortcut To change the number assigned to a shortcut:

1 From the main menu, select Shortcuts. 2 With any shortcut highlighted, press m. 3 Select Reorder. 4 Scroll to the shortcut you want to move. 5 Press A under Grab. 6 Scroll to the place where you want the shortcut to appear. 7 Press A under Insert. 8 Repeat step 4 through step 7 for all the items you want to move. 9 Press A under Done. To change the number or voice name assigned to a shortcut:

1 From the main menu, select Shortcuts. 2 Highlight any shortcut. 3 Press A under Edit. Editing a Shortcut 4 With Key or Voice highlighted, press O to change assignments. Deleting Shortcuts To delete a shortcut:

1 From the main menu, select Shortcuts. 2 Scroll to the shortcut you want to delete. 3 Press m. 4 Select Delete. 5 Press O or press A under Yes to confirm. To delete all shortcuts:

1 From the main menu, select Shortcuts. 2 With any shortcut highlighted, press m. 3 Select Delete All. 4 Press O or press A under Yes to confirm. 168 Using a Headset If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time:

Note: The preferred connection to your phone is a wired audio device. If you insert a wired headset into the audio jack on your phone, audio will be routed to the wired headset and you will lose your Bluetooth headset connection. 1 From the main menu, select Settings >

Advanced > Headset/Spkr. 2 Select HdsetOnly to send incoming sound to the headset only. -or-

Select Hdset&Spkr to send incoming sound to the headset and ring tones to the speaker. Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call. See Setting Flip Actions on page 58. Using a Bluetooth Headset You can use your i870 wirelessly with a Bluetooth headset. This type of wireless headset lets you connect quickly to devices that are within range. For more information, refer to your Bluetooth headsets user guide. Attaching a Headset 1 Lift the audio jack cover. 2 Insert the headset connector firmly into the audio jack. You may have to rotate the headset connector until it fits securely into the audio jack. Using a Remote PTT Button If you are using a headset or other accessory with a remote PTT button, you can use the remote PTT button for phone calls, Private calls, group calls, and SDG calls. For phone calls, use the remote PTT button to answer calls, switch between calls, and end calls. Hold the remote PTT button for less than 2 seconds to answer calls and switch between calls. Hold the remote PTT button for more than 2 seconds to end calls. 169 Using a Remote PTT Button For Private calls, group calls, and SDG calls, use the remote PTT button as you would the PTT button on your phone. Note: When using a headset, the PTT button on your phone works the same way as when you are not using a headset. Sounds associated with Private calls, group calls, and SDG calls are heard through the headset. 170 Understanding Status Messages You may receive status messages under certain conditions. Before contacting Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages. Status Messages System Busy Message Description The system is experiencing heavy traffic. Please try again later. Service Conflict This service cannot be enabled because an incompatible service has already been turned on. An error occurred. Please try again. Message Description The number that you entered is not valid. Status Messages Number Not in Service User Not Available The phone that you called is either busy, out of coverage, or turned off. Please try again later. The person that you called has not purchased this service. User Not Authorized Please Try Later This service is temporarily not available. Please try again later. This service was restricted by your service provider, or this service was not purchased. You are either out of coverage or having problems with provisioning. Service Restricted Service Not Available 171 Please Try Again SIM PIN incorrect. Try again. Please Enter Special Code Self Check Error

+ Number Code Self Check Fail

+ Number Code You have entered an incorrect PIN number. You have inserted a SIM card that will not work with your service providers phone. Contact Customer Care if you believe this is a valid SIM card. A fault was detected with your phone. If this error recurs, note the error code and contact Customer Care. An operational fault was detected with your phone. Note the numeric code, turn your phone off, and contact Customer Care. Status Messages Scanning for Satellites Message Description Searching for GPS satellites. Could not find GPS satellites. Unable to Locate Sats Technical Error A problem occurred in your phones GPS circuitry. If this error occurs, contact Customer Care. Status Messages PIN Blocked Call Your Provider Insert SIM Enter SIM PIN Enter Unlock Code New Browser Message Memory Full!

Hardware Failure Resource Not Available Message Description The incorrect PIN was entered 3 consecutive times. You will be unable to place or receive calls on your phone. Contact Customer Care to have them obtain the PIN Unblock Key

(PUK) code. Your SIM card is not being detected. Please check to ensure that you have inserted the SIM card correctly into your phone. Please enter your 4- to 8- digit SIM PIN code. Auto Phone Lock is activated. Enter your unlock code. Warns of low memory for Net Alerts. A problem occurred in your phones camera. If this error occurs, contact your service provider. Your phones camera is temporarily unavailable for use. Please try again later. 172 Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO. RF Operational Characteristics Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network. Portable Radio Product Operation and EME Exposure Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):

173

United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J.

American National Standards Institute (ANSI) /

Institute of Electrical and Electronics Engineers

(IEEE). C95. 1-1992. Institute of Electrical and Electronics Engineers

(IEEE). C95. 1-1999 Edition. International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.

Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999.

Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003.

ANATEL, Brasil Regulatory Authority, Resolution 303 (July 2, 2002) "Regulation of the limitation of exposure to electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz."

"Attachment to Resolution 303 from July 2, 2002."

Portable Radio Product Operation and EME Exposure To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:

Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone. Two-way radio operation Your radio product has been designed and tested to comply with national and international standards and guidelines regarding human exposure to RF electromagnetic energy, when operated in the two-way mode (at the face, or at the abdomen when using an audio accessory) at usage factors of up to 50% talk/50% listen. Transmit no more than the rated duty factor of 50%

of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time or less, is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance). When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips. Body-worn operation To maintain compliance with FCC RF exposure guidelines, if you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC RF exposure guidelines. If you do not use a Motorola approved body-worn accessory and are not using the radio product in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode, then ensure the antenna and the radio product are kept the following minimum distances from the body when transmitting

Phone or Two-way radio mode: one inch (2.5 cm)

Data operation using any data feature with or without an accessory cable: one inch (2.5 cm) 174 Safety and General Information ALL MODELS WITH FCC ID AZ489FT5846 MEET THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are conducted using standard operating positions reviewed by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that is does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the 175 body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.59 W/kg and when tested on the body, as described in this user guide, is 1.32 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.)2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID AZ489FT5846. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. 1 In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. 2 The SAR information reported to the FCC includes the FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product. Antenna Care Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio product and may violate FCC regulations. DO NOT hold the antenna when the radio product is IN USE. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed. Approved Accessories For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/iden. Electromagnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Electromagnetic Interference/Compatibility Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your radio product when on board an aircraft. Any use of a radio product must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers The Advanced Medical Technology Association

(AdvaMed) recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio product and a pacemaker. These recommendations are consistent with those of the U.S. Food and Drug Administration. Persons with pacemakers should:

ALWAYS keep the radio product more than 6 inches (15 cm) from their pacemaker when the radio product is turned ON. 176 Safety and General Information

Not carry the radio product in a breast pocket.

Use the ear opposite the pacemaker to minimize the potential for interference.

Turn the radio product OFF immediately if you have any reason to suspect that interference is taking place. Hearing Aids Some digital wireless radio products may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. For more Hearing Aid Compatibility information, see Hearing Aid Compatibility on page 181. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use While Driving Check the laws and regulations on the use of radio products in the area where you drive. Always obey them. When using the radio product while driving, please:

177

Give full attention to driving and to the road.

Use hands-free operation, if available.

Pull off the road and park before making or answering a call if driving conditions so require.

Operational Warnings For Vehicles with an Air Bag Do not place a portable radio product in the area over the air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio product may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Turn off your radio product prior to entering any area with a potentially explosive atmosphere, unless it is a radio product type especially qualified for use in such areas as Intrinsically Safe (for example, Factory Mutual, CSA, or UL approved). Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: Turn off two-way radio. Obey all signs and instructions. Operational Cautions Batteries All batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any

Operational Cautions charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. To reduce the risk of injury, batteries should not be exposed to fire, disassembled, or crushed. Cleaning and Drying Considerations Using a leather carry case may help protect the surfaces and help prevent liquids (e.g., rain) from entering into the interior of the radio product. This product is not water proof, and exposing the unit to liquids may result in permanent damage to the unit. If your radio product interior gets wet, then do not try to accelerate drying with the use of an oven or a dryer as this will damage the radio product and void the warranty. Instead, do the following:

1 Immediately power off the radio product. 2 Remove Battery and SIM card (if so equipped) from radio product. 3 Shake excess liquid from radio product. 4 Place the radio product and battery in an area that is at room temperature and has good air flow. 5 Let the radio product, battery, and SIM card dry for 72 hours before reconnecting the battery and/or powering on the radio product. 178 Safety and General Information If the radio product does not work after following the steps listed above, contact your dealer for servicing information. Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product. Accessory Safety Information Important: Save these accessory safety instructions.

Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery. 179

Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only.

Warning: To reduce the risk of injury, charge only the rechargeable batteries described in Battery on page 4. Other types of batteries may burst, causing personal injury and damage.

To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you disconnect the battery charger from the power source outlet.

Do not operate any battery charger with a damaged cord or plug replace them immediately.

Battery chargers may become warm during operation, but not hot. If it becomes hot to the touch, unplug it from the power outlet immediately and discontinue its use.

Use of a non-recommended attachment to a battery charger may result in a risk of fire, electric shock, or injury to persons.

Make sure the battery charger power cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress. Accessory Safety Information

The disconnection from the line voltage is made by unplugging the power supply from the AC receptacle.

To reduce risk of electric shock, unplug any battery charger from the outlet before attempting any maintenance or cleaning. For optimum charging performance, turn off the radio product while charging it in any battery charger.

An extension cord should not be used with any battery charger unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that:

The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.

The extension cord is properly wired and in good electrical condition.

The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet.

Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician.

Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

Maximum ambient temperature around the power supply or transformer of any battery charger should not exceed 40C (104F).

The output power from the power supply or transformer must not exceed the rating given on the Desktop Dual-Pocket Charger. 180 Hearing Aid Compatibility Hearing Aid Compatibility When some mobile phones are used with certain hearing devices (including hearing aids andcochlear implants), users may detect a noise which can interfere with the effectiveness of the hearing device. Some hearing devices are more immune than others to this interference noise, and mobile phones can also vary in the amount of interference noise they may generate at any given time. ANSI standard C63.19 was developed to provide a standardized means of measuring both mobile phone and hearing devices to determine usability rating categories for both. Ratings have been developed for mobile phones to assist hearing device users find phones that may be compatible with their particular hearing device. Not all mobile phones are rated for compatibility with hearing devices, but mobile phones that are rated should have the rating available. This rating may depend on the position of a retractable antenna. 181 Results will vary depending on the users hearing device and individual type and degree of hearing loss. If a hearing device is particularly vulnerable to interference noise, even a mobile phone with a higher rating may still cause unacceptable noise levels in the hearing device. Evaluate your personal needs by trying out the mobile phone with your hearing device. M Rating: Mobile phones rated M3 or M4 meet FCC requirements for hearing aid compatibility and are likely to generate less interference to hearing devices than phones that are not labeled. (M4 is the better or higher of the two ratings.)

"T" Rating: Mobile phones rated T3 or T4 meet FCC requirements for compatibility with telecoil-type ("T Switch" or "Telephone Switch") hearing devices and are likely to be more usable with such hearing devices than unrated phones.

(T4 is the "better" or higher of the two ratings.) Hearing devices may also be measured for immunity to interference noise from mobile phones. In some cases, hearing devices can be modified or hardened to improve operation with a mobile phone. Your hearing device manufacturer or hearing health professional may help you improve the interaction of your mobile phone and hearing device. Not all hearing devices are rated for compatibility with mobile phones, but hearing devices that are rated should have the rating available. Be sure to evaluate your personal needs by trying out this mobile phone with your specific hearing device, using both antenna positions if equipped with a retractable antenna. More information about hearing aid compatibility may be found at:

http://commerce.motorola.com/consumer/QWhtml/

accessibility/default.html, www.fcc.gov, www.fda.gov, and www.accesswireless.org. 182 MOTOROLA LIMITED WARRANTY Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA What Does this Warranty Cover?

Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets ("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and Motorola software contained on CD-Roms or other tangible media and sold for use with these Products ("Software") to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:

183 LENGTH OF COVERAGE One (1) year from the date of purchase by the first consumer purchaser of the product. One (1) year from the date of purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Ninety (90) days from the date of purchase. PRODUCTS COVERED Products as defined above. Accessories as defined above. Products or Accessories that are Repaired or Replaced. Software as defined above. Applies only to physical defects in the media that embodies the copy of the software

(e.g. CD-ROM, or floppy disk). What is not covered? (Exclusions) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Ornamental Decorations. Ornamental decorations such as emblems, graphics, rhinestones, jewels, gemstones and their settings, and other decorative elements, are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with

(a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, antennas, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products, Accessories or Software is excluded from coverage. 184 MOTOROLA LIMITED WARRANTY Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. Software NOT Embodied in Physical Media. Software that is not embodied in physical media

(e.g. software that is downloaded from the internet), is provided "as is" and without warranty. Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service. 185 How to Obtain Warranty Service or Other Information? To obtain service or information, please call:

Motorola iDEN Customer Services 1-800-453-0920 or 954-723-4910 TTY-877-483-2840 Or visit us online at http://www.motorola.com/iden/support You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted. THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT

(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. 186 Limited Warranty Motorola Communication Products (International) Limited Warranty Motorola Communication Products (International) Note: This Warranty applies in Singapore and the Philippines. I. What This Warranty Covers and For How Long:

MOTOROLA warrants the MOTOROLA manufactured iDEN Communication Products listed below (Product) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:

iDEN Subscriber Digital Mobile and Portable Units Product Accessories

(manufactured by or under license from MOTOROLA) Batteries One (1) Year One (1) Year One (1) Year 187 Rechargeable Batteries will be replaced during the applicable warranty period if:

a. the battery capacity falls below 80% of rated capacity, or b. the battery develops leakage. MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole, or any portion of the system not produced by MOTOROLA, under this warranty. II. General Provisions:

This warranty sets forth the full extent of MOTOROLAS responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLAS options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. How to Get Warranty Service:

You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. IV. What This Warranty Does Not Cover:

a. Defects or damage resulting from use of the Product in other than its normal and customary manner. 188 Limited Warranty Motorola Communication Products (International) b. Defects or damage from misuse, accident, water, or neglect. c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. d. Breakage or damage to antennas unless caused directly by defects in material workmanship. e. A Product subjected to unauthorized Product modifications, disassemblies or repairs

(including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment). f. Product which has had the serial number removed or made illegible. g. Rechargeable batteries if:

1.Any of the seals on the battery enclosure of cells are broken or show evidence of tampering. 2.The damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. h. Freight costs to the repair depot. i. A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with 189 MOTOROLAS published specifications or the local type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. j. Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product. k. Normal and customary wear and tear. l. Exclusion for defects or damage arising from use of the products in connection with non-MOTOROLA equipment. VI. Patent and Software Provisions:

MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:

a. That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;

b. That MOTOROLA will have sole control of the defense of such suit and all negotiations for its Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. settlement or compromise; and c. Should the Product or parts become, or in MOTOROLAS opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement. 190 Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. Reg. U.S. Pat. &

Tm. Off. 2005 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9 Text Input Patent and Trademark Information This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. All other product names or services mentioned in this manual are the property of their respective trademark owners. Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. 191 Index Numerics 2-way radio 159 see also Private calls, group calls, SDG calls, and call alerts 3-way calling 55 A Accessories 22 safety 179 Antenna 22 Audio player 12 accessing from media center 100 deleting files 108 equalizer 109 folders and lists 103 playing 101 playlists 105 searching for songs 104 supported file formats 14 visuals 109 Audio recordings 97 playing 97 B Backlight 158 Battery care 6 charging 5, 6 door 4 inserting 4 safety 178 Baud rate 161 Bluetooth 134 access settings 134 access settings, editing 139 accessing 135 bonds 134, 137 connections, making 136 deleting received items 141 device details 139 device names, editing 139 devices, deleting 139 devices, disconnecting 138 devices, discovering 136, 138 discoverable mode 136 during an active call 138 headset 169 icons 11 PINs 137 reassigning a device name 135 receiving items 140 selecting a Find Me duration 135 sending Contacts 139 sending Datebook events 140 sending pictures 140 setting device details 138 setting voice dialing 135 setting your phone 134 status icons 13 storing received items 141 transfers, canceling 141 Transmitters 157 turning on or off 135 viewing received items 141 C Call alerts 34 deleting 35 192 Index queue 34 receiving 34 responding 34, 35 sending 34 sorting 35 viewing 35 Call filtering 165 Call forwarding 51 all calls 51 missed calls 52 off 52 Call Timers 58 Call Waiting 54 off 54 Calls group, see Group calls international 56 making 23 on hold 55 phone calls 23 Private calls 23, 57, 159 receiving 24 redialing 26, 158 remote PTT 169 SDG, see SDG calls Speed Dial 26 TTY, see TTY calls Turbo Dial 26 voice name 25 with Quick PTT 57 3-way 55 answering automatically 158 answering with any key 24, 158 emergency 27 ending 24 entering number 25 from memo 70 from recent calls 39 Camera 86 see also pictures accessing 86 accessing during private calls 114 accessing from media center 99 picture options 87 setting up 90 storing pictures 86 193 taking pictures 86 Circuit data 60 Clock 158 Contact information receiving 37, 118 Send via PTT 116 sending 116 Contacts 41 accessing 42 capacity 48 creating entries 42 deleting 47 editing entries 45 icons 41 iDEN Phonebook Manager 49 international numbers 48 pictures 41, 43, 46, 88, 96 ring tones 41, 43 searching 47 showing all entries 47 showing only Private IDs 47 SIM card 41 storing fast 44 storing from idle screen 44 storing from Memo 44, 70 storing from recent calls 38, 44 type 41 voice name 44 with non-i870 phones 50 D Data transfers 60 Datebook profiles 124 Digital rights management, see DRM Direct Launch 32 Display backlight 158 options 10 screen 9 Drafts 84 see also MOSMS messages, drafts DRM count-based usage 110 default location 95 definition 110 deleting items 73, 98, 112, 130 expired items 112 gifting 95, 111 installing items 110 java applications 129 managing items 111 media center 95, 108 renewing license 112 ring tones 73 sharing items 110 status icons 95, 110 Tell-A-Friend 95, 111 time-based usage 110 viewing license information 111 DTMF dialing 136 E Email 42, 43, 60 Emergency calls 27 End key 2 F Faxes receiving 60 sending 60 Flip action 23, 24, 58 G GPS Enabled 142 almanac data 147 best results 146 emergency calls 27, 144 map software 149 privacy options 148 security 148 viewing location 145 GPS PIN 160 GPS, see GPS Enabled Group calls 63, 159 making 64 off 64 receiving 64 H Handset, see phone Headset 169 Hearing Aid Compatibility 181 194 Index I Icons Bluetooth 11, 13 Contacts 41 DRM 110 SDG 12, 68 status 12 text entry 75 voice records 152 iDEN Phonebook Manager 49 Idle screen 9 creating MOSMS messages 83 storing to Contacts 44 International numbers 56 calling 56 storing 48 J Java applications deleting 130 DRM 129 memory 130 K Keypad 2 195 locking 160 L Language 158 Lists, see menus M Media center 92 accessing audio player 100 audio recordings 97 deleting 98 DRM items 95, 108 forward locked 94 locking 98 memory 100 pictures 95 renaming 97 viewing 93 Memo 70 calling from 70 creating 70 editing 70 storing to Contacts 44, 70 viewing 70 Memory Java applications 130 media center 100 MOSMS messages 85 ring tones 73 voice records 154 Memory card 14 audio file formats 14 audio player 101 copying items 99 folders and files 14 inserting 15 moving items 99 removing 16, 161 ring tones 72 setting storage preference 15, 89, 99, 161 storing pictures from camera 86 supported formats 14 Menu key 2, 10 Menus 10 context-sensitive 2, 10 main menu 10 SDG list 65 Message center 78, 80 see also messages MOSMS messages 82 Message notifications 78 setting options 78 Messages 78 see also voice mail, MOSMS messages, and SMS messages receiving 78 Modem data transfer modes 60 with a data cable 59 with Bluetooth 60 MOSMS messages 81 creating 82 deleting 84, 85 drafts 84 memory 85 message center 82 quick notes 83 receiving 81 sending 82 sent messages 84 setting up 81 sorting 85 MOTOtalk calls, ending 32 channels 29 channels, setting 29 code calls, making 30 code calls, receiving 30 codes 29 codes, setting 29 Direct Launch 32 emergency calls 32 private MOTOtalk calls 31 Private Only setting 31 receiving all calls 30 setup options 32 State Tone 33 switching to 28 switching to network mode 29 talk range 29 MP3 files 12, 15, 100, 101, 108 see also audio player Mute 27 My Info 119 editing 119 receiving 36, 118 Send via PTT 116 sending 116, 120 viewing 119 N Navigation key 2 O One Touch PTT 56 setting 56 turning off 57 Over-the-air programming 8 P Packet data 60 Passwords 160 Patent information 191 Pauses dialing 56 storing 48 Phone 1, 9 active line 158 flip action 23, 24, 58 locking 160 modem 59 off 7 196 Index on 7 only 161 setting up 3 Pictures 95 accessing the camera 86 Contacts 41, 43, 46, 88, 96 inserting in messages 88, 96 receiving 115 recent calls 38 Send via PTT 114 sending 96, 114 taking 86 Profiles 162 call filtering 165 changing settings 162 creating 164 Datebook 124 deleting 164 editing 164 switching 162 temporary 163 viewing 162 Programming, over-the-air 8 PTT 197 One Touch 56 One Touch, setting 56 One Touch, turning off 57 Quick 57 PUK code 18 Q Quick notes 83 see also MOSMS messages, quick notes Quick PTT 57 R Radio frequency 173 Recent calls 36 call alerts 36 calling from 39 contact information 37 creating MOSMS messages 83 deleting 39 display time 161 My Info 36 pictures 38 storing to Contacts 38, 44 viewing 37 Redialing 26, 158 Ring tones 71 deleting 73 downloading 73 DRM 73 in Contacts 41, 43 memory 73 off 71 setting 71 setting in Contacts 72 vibrate 71 viewing assigned 72 Ringer 155 see also Ring tones off 155 S Safety 173 accessory 179 battery 178 driving 200 electromagnetic interference 176 medical devices 176 radio frequency 173 SDG calls icons 12, 68 lists, adding numbers 65 lists, creating 65 lists, deleting 66 lists, removing members 66 lists, sending 68 lists, storing faster 66 making 67 Quick PTT 57 receiving 68 settings 159 starting 67 Security 160 Selective Dynamic Group Calls, see SDG calls Send via PTT 114 see Pictures, sending contact information 116 My Info 116 pictures 114 SDG lists 68 setting for pictures 116 Service, activating 7 Settings 158 resetting 161 Shortcuts creating 167 deleting 168 editing 168 using 167 SIM card 3, 17, 19 Contacts 41 inserting 19 removing 20 with non-i870 phones 50 SIM PIN 17, 160 changing 17 default 17 entering 17 requirement 18 unblocking 18 Sleep mode 158 setting interval 157 SMS messages 78, 81 also see MOSMS messages 81 Speakerphone 26 Speed Dial 26, 42, 44 State Tone 33 Status messages 171 T T9 Text Input, see text entry Talkgroups 63, 64, 159 joining 64 Text display area 9 Text entry 75 database 75, 76 icons 75 mode 75 Word mode 75 Trademark information 191 Transmitters 13, 157 power button 7 settings 161 turning on and off 157 TTY calls 60 baud rate 62 making 60 mode 61 on 61 Turbo Dial 26 198 Word mode 75 Index V Video 89 Voice mail 78, 80 receiving 80 sending calls to 24, 80 setting up 52, 80 Voice name 25, 42 creating 44 Voice records 152 creating 152 deleting 154 icons 152 labelling 153 locking 153 memory 154 playing 153 viewing 152 Volume, setting 155, 160 W Waits dialing 56 storing 48 Wallpaper 89, 96 Warranty 187 199 Driving Safety Tips Safety is your most important call!

Your Motorola wireless telephone gives you the powerful ability to communicate by voice almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies that benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility. If you find it necessary to use your wireless phone while behind the wheel of a car, practice good common sense and remember the following tips:

Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.

When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many Motorola Original hands-free accessories available today.

Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. If you receive an incoming call at an inconvenient time do not take notes or look up phone numbers while driving. Jotting down a to do list or going through your address book takes attention away from your primary responsibility driving safely.

Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.

Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations which have the potential to divert your attention away from the road. 200

Driving Safety Tips

Your phone can perform many other functions besides allowing you to make and receive calls. Do not let these features distract you from driving. Use them only when it is safe to do so.

Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.

Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.

Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. 201