all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual | Users Manual | 3.47 MiB | ||||
1 |
|
RF Safety Manual | Users Manual | 76.66 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | RF Exposure Info | |||||||
1 | Attestation Statements | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Manual | Users Manual | 3.47 MiB |
Mission Critical MC-EDGE Owners Manual Contact Us Motorola Solution Support Center The Solution Support Center (SSC) is the primary Motorola Solutions support contact. Call:
1. Before any software reload. 2. To confirm troubleshooting results and analysis before removing and replacing a Field Replaceable Unit (FRU) and Field Replaceable Entity (FRE) to repair the system. For... United States Calls International Calls Phone 800-221-7144 302-444-9800 North America Parts Organization For assistance in ordering replacement parts or identifying a part number, contact the Motorola Parts organization. Your first response when troubleshooting your system is to call the Motorola SSC. For... Phone Orders Phone 800-422-4210 (US and Canada Orders) For help identifying an item or part number, select choice 3 from the menu. 302-444-9842 (International Orders) Includes help for identifying an item or part number and for translation as needed. 800-622-6210 (US and Canada Orders) Fax Orders Comments Send questions and comments regarding user documentation to documentation@motorolasolutions.com. Provide the following information when reporting a documentation error:
3. The document title and part number 4. The page number with the error 5. A description of the error We welcome your feedback on this and other Motorola manuals. To take a short, confidential survey on Motorola Customer Documentation, go to docsurvey.motorolasolutions.com or scan the following QR code with your mobile device to access the survey. Latest Manual Versions You can verify the latest version of this manual at https://businessonline.motorolasolutions.com 2 Send Feedback Contact Us Copyrights The Motorola products described in this document might include copyrighted Motorola computer programs. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this document might not be copied or reproduced in any manner without the express written permission of Motorola. 2018 Motorola Solutions, Inc. All Rights Reserved No part of this document might be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola Solutions, Inc. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Disclaimer Note that certain features, facilities, and capabilities described in this document might not be applicable to or licensed for use on a particular system, or might be dependent upon the characteristics of a particular mobile subscriber unit or configuration of certain parameters. Please refer to your Motorola contact for further information. Trademarks MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. European Union (EU) Waste of Electrical and Electronic Equipment
(WEEE) directive The European Union's WEEE directive requires that products sold into EU countries must have the crossed out trash bin label on the product (or the package in some cases). As defined by the WEEE directive, trash bin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection system in their country. this cross-out Send Feedback 3 Document History Edition Description MN004736A01-A Release 1.0 Date February 2018 4 Send Feedback Contact Us FCC Information This device complies with Part 15 of the FCC rules:
Operation is subjected of the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. FCC ID and IC of radio units:
Radio APX4000 VHF APX4000 UHF R1 APX4000 UHF R2 APX4000 700/800 APX4000 900 LTE Band 4 and Band 13 LoRa Module FCC ID AZ492FT1112 AZ492FT7113 AZ492FT7114 AZ492FT7115 AZ492FT7116 N7NHL7588 SQG-1001 IC 109U-92FT7112 109U-92FT7113 109U-92FT7114 109U-92FT7115 109U-92FT7116 2417C-HL7588 3147A-1001 Important Safety Information ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6802988C84-B to ensure compliance with RF energy exposure limits. Notice to Users (FCC and Industry Canada) This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSS's per the following conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this device, not expressly approved by Motorola, could void the authority of the user to operate this equipment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication Send Feedback 5 This radio transmitter has been approved by Industry Canada to operate with Motorola-approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Compliance Statement This Class B digital apparatus complies with Canadian ICES-003 Avis de conformit la rglementation d'Industrie Canada Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 6 Send Feedback Contact Us Contents Contact Us Motorola Solution Support Center North America Parts Organization Comments Latest Manual Versions Copyrights Disclaimer Trademarks European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) directive Document History FCC Information List of Figures List of Tables List of Procedures Glossary About MC-EDGE What is Covered in This Manual Helpful Background Information Related Information MC-EDGE Description General Description MC-EDGE Construction Inputs and Outputs (I/Os) Built-in Radios LoRaWAN software upgradeable LTE Verizon Bands Software Upgradeable Communication Interfaces Memory CPU Real Time Clock (RTC) MC-EDGE Components MC-EDGE CPU CPU Pushbutton CPU LEDs Send Feedback 1 2 2 2 2 2 3 3 3 4 5 11 15 19 23 26 26 26 26 27 29 29 29 29 29 30 30 32 32 32 35 36 36 7 I/O Expansion Modules MC-EDGE I/O Module LEDs MC-EDGE Input Module I/O Arrangement MC-EDGE Output Module I/O Arrangement MC-EDGE Mixed I/O Module Arrangement MC-EDGE I/O Module Terminal Block Connectors MC-EDGE Hardware Test MC-EDGE Antennas MC-EDGE External Power Supply or Battery MC-EDGE External Devices Disposal of Components MC-EDGE Installation General Mounting the MC-EDGE on a DIN Rail Connecting an I/O Expansion Module to the MC-EDGE CPU Connecting an I/O Expansion Module to another I/O Expansion Module MC-EDGE Power and Ground Connections Connecting the MC-EDGE to Power and Ground Connecting MC-EDGE Data Cables Connecting MC-EDGE I/Os Bundling MC-EDGE Cables Extracting Terminal Block Connectors from the I/O Module Adding an Optional SD Card Connecting Antennas to the MC-EDGE Replacing the MC-EDGE DC Power Cable Fuse Optional Auxiliary Radios and Installation Kits MC-EDGE Supported Radio Types Installation Kits for MC-EDGE Auxiliary Radios MTM5200, MOTOTRBO XPR 5350 and APX 6500 Radio Installation Kits Installing the Mobile Radio Installation Kits Configuration and Programming for the ASTRO APX 4000/APX 6500 Radio Configuring the RTU Port Type for the APX 4000/APX 6500 Radio RTU Port Type Advanced Parameter Configuration (for APX 4000/APX 6500 Radio) IP Conversion Table for the APX 4000/APX 6500 Radio APX 4000/APX 6500 Radio Programming using CPS Connecting the APX 4000/APX 6500 Radio Disassembing the APX 6500 Radio Programming the APX Radio 38 40 43 43 44 45 45 45 46 47 48 49 49 50 52 54 54 55 58 58 59 60 61 62 64 65 65 65 66 66 66 69 69 70 70 71 71 71 72 8 Send Feedback Contact Us Infrastructure Configuration for the APX 6500 Radio ASTRO APX 6500Li Options for MC-EDGE Appendix A: MC-EDGE Specifications MC-EDGE General Specifications MC-EDGE Input Module Specifications MC-EDGE Output Module Specifications MC-EDGE Mixed I/O Module Specifications MC-EDGE Regulatory Specifications Appendix B: Cables and Adaptors General Connection to a Computer via RS232 Connection to a Modem via RS232 Connection to a PLC/RTU/FEP via RS232 Connection to a PLC/RTU/FEP via RS485 Connection to a Computer (Ethernet) Connection to a Computer (USB OTG) MC-EDGE CPU to MC-EDGE I/O Expansion Module Connection Appendix C: MC-EDGE I/O References Input /Mixed IO Module Block Diagram Digital Output Circuit Diagrams Analog Output Circuit Diagram Output Module Block Diagram Digital Output Circuit Diagrams Analog Output Circuit Diagram Appendix D: MC-EDGE External Connector Pin Outs MC-EDGE CPU LAN Port Connector MC-EDGE CPU RS232 Port Connector MC-EDGE CPU RS485 Port Connector MC-EDGE CPU I/O Connector MC-EDGE CPU RJ50 Connector MC-EDGE Input Module RJ50 Connector MC-EDGE Input Module DI Connector MC-EDGE Input Module AI Connector MC-EDGE Output Module RJ50 Connector MC-EDGE Output Module DO Connector Appendix E: MC-EDGE Field Replacement Units MC-EDGE Field Replacement Units and Parts Send Feedback 73 73 75 75 80 82 83 84 85 85 85 86 87 89 90 90 90 92 92 93 93 94 96 96 100 100 100 101 101 101 102 103 104 105 106 110 110 9 List of Figures Figure 1 MC-EDGE Unit with Two I/O Expansion Modules with Covers. 15 Figure 2 MC-EDGE Unit with two I/O Expansion Modules without Front Panel Covers. 16 Figure 3 MC-EDGE CPU General View with and without Side. 20 Figure 4 MC-EDGE Front View.. 20 Figure 5 CPU Front Panel LEDs. 21 Figure 6 MC-EDGE Input Expansion Module. 23 Figure 7 MC-EDGE Output Expansion Module. 24 Figure 8 MIXED IO Module. 24 Figure 9 MC-EDGE Input Module I/O Arrangement 28 Figure 10 MC-EDGE Output Module I/O Arrangement 29 Figure 11 Dimensions of MC-EDGE Unit 35 Figure 12 Plastic Tab in the MC-EDGE Unit 37 Figure 13 Hooking the MC-EDGE Unit onto the DIN Rail 37 Figure 14 Hooking the MC-EDGE Unit with I/O Expansion Module onto the DIN Rail 38 Figure 15 MC-EDGE CPU Side Cover 38 Figure 16 MC-EDGE CPU Connection to I/O Expansion Module. 39 Figure 17 MC-EDGE I/O Expansion Module Connection to I/O Expansion Module. 40 Figure 18 MC-EDGE DC Power Cable with Fuse. 41 Figure 19 MC-EDGE Power and Ground Connections. 42 Figure 20 MC-EDGE with I/O Expansion Power and Ground Connections. 42 Figure 21 MC-EDGE I/O Module with TB Connector 44 Figure 22 MC-EDGE Cables in Plastic Fastener 45 Figure 23 TB Extractor on TB.. 46 Figure 24 MC-EDGE CPU SD Cover 47 Figure 25 Outdoors Installation of MC-EDGE Antennas. 48 Figure 26 MTM5200, MOTOTRBO XPR 5350 and APX 6500 Radio Installation Kit Bracket Assembly 51 Figure 27 MTM5200, MOTOTRBO XPR 5350 and APX 6500 Radio Installation Kit Bracket Assembly on DIN Rail 52 Figure 28 APX 6500 Radio on DIN Rail 52 Figure 29 XPR 5350 Radio on DIN Rail 53 Figure 30 MTM5200 Radio on DIN Rail 53 Figure 31 RTU Site Configuration for MDLC over ASTRO APX Radio Advanced Parameters. 54 Figure 32 MC-EDGE RJ45 RS232 connector 68 Figure 33 Computer-RS232 Connectivity. 69 Figure 34 RS232- Modem Connectivity. 70 Figure 35 RS232-RTU/FEP Connectivity. 71 10 Send Feedback Contact Us Figure 36 RS232-PLC Connectivity. 71 Figure 37 RS485- PLC/RTU/FEP Connectivity. 72 Figure 38 B-6 MC-EDGE CPU to MC-EDGE I/O Expansion Module Connectivity. 74 Figure 39 12 DI/8 AI Input module 7 DI/4 AI Mixed IO module. 75 Figure 40 Digital Output Circuit Diagrams. 76 Figure 41 Analog Output Circuit Diagram.. 76 Figure 42 Output Module Block Diagram.. 77 Figure 43 Digital Output Circuit Diagrams. 78 Figure 44 Analog Output Circuit Diagram.. 78 Figure 45 MC-EDGE Input Module RJ50 Connector 83 List of Procedures 38 Procedure 1. Mounting the MC-EDGE on a DIN Rail 39 Procedure 2. Connecting an I/O Expansion Module to the MC-EDGE CPU 41 Procedure 3. Connecting an I/O Expansion Module to another I/O Expansion Module 42 Procedure 4. Connecting the MC-EDGE to Power and Ground 44 Procedure 5. Connecting the MC-EDGE Data Cables 44 Procedure 6. Connecting the MC-EDGE I/Os 45 Procedure 7. Bundling the MC-EDGE Cables 46 Procedure 8. Extracting the TB Connector from the I/O Module 47 Procedure 9. Adding an Optional SD Card 49 Procedure 10. Replacing the MC-EDGE DC Power Cable Fuse 52 Procedure 11. Installing the Mobile Radio Installation Kits 55 Procedure 12. Making the Bracket Smaller for MOTOTRBO XPR 5350 and MTM5200 Radios 56 Procedure 13. Mounting the Mobile Radio Power Supply for MC-EDGE 58 Procedure 14. Installing the APX 4000 Radio Installation Kit 60 Procedure 15. Installing the XPR 7350/80 Radio Installation Kit 63 Procedure 16. Configuring the MC-EDGE Port for the APX 4000/APX 6500 Radio Procedure 17. Configuring the Advanced Parameters of the MC-EDGE Port for the ASTRO APX Radio64 65 Procedure 18. Connecting the APX 4000/APX 6500 Radio to the CPS Procedure 19. Disassembling the APX 4000 Radio 65 66 Procedure 20. Disassembling the APX 6500 Radio 66 Procedure 21. Programming the APX Radio Settings Procedure 22. Configuring the MC-EDGE Port for the XPR 5350 MOTOTRBO Digital Radio 68 Send Feedback 11 Procedure 23. Connecting the XPR 5350 MotoTRBO Digital Radio to the CPS Procedure 24. Connecting the XPR 5350 MotoTRBO Digital Radio to the CPS Procedure 25. Disassembling the XPR 5350 MOTOTRBO Digital Radio from the MC-EDGE Unit Procedure 26. Programming the MOTOTRBO Digital Radio Procedure 27. How to Configure the MC-EDGE Port for the MotoTrbo Connect Plus RadioPart 1: FIU Configuration to XRT Gateway 72 Procedure 28. How to Modify the Default Advanced Port Parameters for MotoTrbo Connect Plus Radio75 Procedure 29. How to Connect the MotoTrbo Connect Plus Radio to the CPS 77 Procedure 30. How to Disassemble the MotoTrbo Connect Plus Radio from the MC-EDGE Metal Chassis 78 80 Procedure 31. Configuring the MC-EDGE Port for the XPR 5350 MOTOTRBO Digital Radio Procedure 32. Configuring the Advanced Parameters of the MC-EDGE Port for the ASTRO APX Radio82 Procedure 33. Configuring the MC-EDGE Port for the MTM5200 Radio 70 70 70 71 12 Send Feedback Contact Us Glossary Advanced Control Equipment Analog Input Analog Output American Wire Gauge Direct Frequency Modulation Digital (Discrete) Input Digital (Discrete) Output Differential Phase Shift Keying Environmentally Preferred Product Electrostatic Discharge European Union Federal Communication Commission Front End Processor Field Programmable Gate Array Frequency Shift Keying Ground Global Positioning Satellite Hardware Industry Canada International Electrotechnical Commission Input/Output Internet Protocol Local Area Network Light Emitting Diode National Electrical Manufacturers Association (issues enclosure standards) Normally Closed Normally Open On-The-Go (USB port as host or device) Personal Computer Parts per Second Random Access Memory Radio Frequency Remote Terminal Unit Receive ACE AI AO AWG DFM DI DO DPSK EPP ESD EU FCC FEP FPGA FSK GND GPS HW IC IEC IO (I/O) IP LAN LED NEMA NC NO OTG PC PPS RAM RF RTU RX SCADA Supervisory Control and Data Acquisition DRAM Dynamic Random Access Memory SW UHF USB VHF WLAN Wireless Local Area Netwo Software Ultra High Frequency Universal Serial Bus Very High Frequency Send Feedback 13 About MC-EDGE This manual provides functional overview and procedures for the MC-EDGE. What is Covered in This Manual This manual contains the following sections:
Helpful Background Information Motorola Solutions offers various courses designed to assist in learning about the system. For information, go to http://www.motorolasolutions.com/training to view the current course offerings and technology paths. Related Information Unless otherwise specified, the Motorola documents listed here are available from Motorola Online at http://businessonline.motorolasolutions.com. If you are new to Motorola Online, follow the on-screen instructions to sign up for an account. To access Public Safety LTE infrastructure manuals, select Resource Center Product Information Manuals MC-IOT and select the appropriate release. The Resource Center also provides a Search function. Additional informaton can be found in the below link https://code.motorolasolutions.com/iiot/MCEDGE Customers outside of the Americas can contact Motorola Solutions for the documentation listed here. 14 Send Feedback Contact Us MC-EDGE Description The IoT Mission Critical EDGE is a part of MSI mission critical IoT portfolio which provides an ecosystem for IoT developers, integrators and users to build out an IoT base solutions The MC EDGE is an highly secured communication agnostic versatile IoT Gateway which uses LoRaWAN for Wireless Sensor Connectivity, extensive Physical I/O suite of interfaces. The MC EDGE provides a suite of tools for edge analytics creation and data manipulation creation which varies from easy /intuitive Codeless web based tools to an highly suffictated C based SDK. The MC EDGE utilize an inherited LTE CAT- 4 and ASTRO
(P25) connectivity capabilities This solution is targeting two main markets: Mission critical with public safety oriented solution e.g. smart early warning, Safe city , Perimeter security etc. and critical infrastructure e.g. Smart water and electricity management On the mission critical side, Highly secured mission critical IoT ecosystem will create a major differentiation points as well as migration path between LMR to PS LTE infrastructure. On the Critical infrastructure side, Communication agnosticism , Highly reliable Industrial GW will provide a market differentiation and superiority Figure 1. MC-EDGE Unit with Two I/O Expansion Modules with Covers Send Feedback 15 Figure 2. MC-EDGE Unit with two I/O Expansion Modules without Front Panel Covers General Description MC-EDGE Construction Each MC-EDGE module is enclosed in a compact protective plastic housing. The CPU front panel provides easy access to connectors, ports and antennas. The I/O module front panel includes terminal block connectors for sensor/device wire connection. The MC-EDGE is mounted on a DIN rail, in a customer-supplied plastic or metal enclosure. For more information on mounting the unit and for enclosure requirements, see MC-EDGE Installation. For the unit dimensions and weight, see Appendix A: MC-EDGE Specifications. Inputs and Outputs (I/Os) The MC-EDGE CPU module includes three Digital Inputs (DI) and one Digital Output (DO). In addition, up to two Input/Output (I/O) expansion modules can be added to the MC-EDGE CPU . For details on the CPU and expansion module I/O specifications, see Appendix A:
MC-EDGE Specifications. For details on the I/O expansion modules, see I/O Expansion Modules. 16 Send Feedback Contact Us Built-in Radios The MC-EDGE unit includes the following set of communication radios:
LoRaWAN software upgradeable (Future option Hardware ready) LoRa (Low power Radio) for customers that are seeking to deploy Internet of Things (IoT) applications fast in areas where large distances are involved, yet low capacity is needed. Wireless Sensors Network Class 1, 8 Channels at freq range of 902 to 928 MHz LoRa has several benefits and characteristics as detailed below:
1. Long range enables solutions such as smart city applications. 2. Low power means long battery life for devices. 3. Low bandwidth makes it ideal for practical IoT deployments with less data and/or with data transmissions. 4. Low(er) connectivity costs. 5. Wireless, easy to set up and fast deployment. 6. Security: a layer of security for the network and one for the application with AES encryption knowing the concerns and security risks regarding IoT. 7. Fully bi-directional communication. 8. Open alliance and an open standard. ASTRO P25 700/800 VHF UHF R1 UHF R2 900 LTE Verizon Bands Software Upgradeable LTE Air Prime HL7588 B4 and B13 per 3GPP Communication Interfaces The MC-EDGE unit includes the following set of communication interfaces, for MDLC communication (between the FEP-RTU and RTU-RTU) and for non-MDLC communication
(general communication with the FEP or RTU.) 1. USB1 Console port (device) 2. MDLC Communication via radio: ASTRO APX IV&D, LAN Ethernet 10/100 Mb/s port
(ETH1) 3. Ethernet communication (MDLC and non-MDLC) 4. Non-MDLC MODBUS communication: SCADA Center slave, PLC master/slave 5. User defined communication: user application/user device Send Feedback 17 6. Configurable RS232 or RS485 serial port (SI1/UART1) 7. Cellular, General PPP connection (MDLC and non-MDLC) Certified with the following modems: Siarra wireless -AirLINK FXT edge, Maxon Intelimax, Telit- Gate Tel GT-HE910-EUD Other similar cellular modems can be used with MC-EDGE. NOTICE: It is the users responsibility to validate operation of any other modem. 8. Serial data modem communication: MDS SD 4710 modem (MDLC and non- MDLC) 9. External null modem communication: Westremo (MDLC and non-MDLC) 10. Communication via radio: TETRA MTM5200 radio (MDLC and non-MDLC) 11. Serial RS232 communication (MDLC and non-MDLC) 12. Serial RS485 multidrop communication (MDLC and non-MDLC) 13. Non-MDLC MODBUS communication: SCADA Center slave, PLC master/slave 14. Time synchronization via GPS 15. User defined communication: user application/user device 16. USB 2.0 Host port (USB4) 17. MDLC communication via radio: ASTRO APX IV&D. The following additional port can be added to the CPU on an optional plug-in board:
18. the following connector enables the connection of an MC-EDGE CPU to an MC-EDGE I/O expansion module. For information, see MC-EDGE I/O Expansion Modules. 19. RJ50 I/O expansion connector Memory The MC-EDGE unit includes the following memory:
1. 256 MB FLASH memory/at least 32 MB available for user data 2. 256 MB LPDDR DRAM/32 MB available for user data 3. Micro SD Card slot, up to 32 GB (card not supplied). In security systems used for CRYPTR module CPU Real Time Clock (RTC) The MC-EDGE CPU includes a low drift RTC. The date and time are retained using an on-board rechargeable lithium battery. The CPU date and time can be set using the Web browser-based Easy Configurator tool or the STS. The CPU can also be synchronized with other RTUs in the system, using the system clock, or via GPS, using a PPS signal connected to the DCD line of the RS232 port. MC-EDGE Components The table below lists the components which can be included in the MC-EDGE. 18 Send Feedback Contact Us Table 1. MC-EDGE Components Component CPU 115/230 VAC to 12VDC power supply or 115/230 VAC to 24VDC power supply I/O expansion module (up to two modules per CPU) Terminal blocks (TB) RS232 cable + adaptor
(FKN0022) RS485 cable (FKN0030
#CB000207A01) External DC power cable
(FKN0033 #CB000170A01) MTM5200 data cable
(FKN0027) APX 6500 data cable
(FKN0035) Ground cable (FKN0034
#30009286001) Expansion module cable
(FHN0065 #30013144001) Function Communicates with the control center, RTUs and other devices via the communication ports. Converts the main AC power source to the voltages required by the unit/radio. Matches between the MC-EDGE and signals of various types/levels. Interfaces between the MC-EDGE and the process signals. Connects the signals to the I/O modules. Connects devices to RS232 port Connects devices to RS485 port Connects CPU to external power supply Connects MTM5200 radio to CPU. Connects APX 6500 radio to CPU. Connects modules to ground. Notes See MC-EDGE CPU. See MC-EDGE External Power Supply. See MC-EDGE I/O Expansion Modules. See MC-EDGE I/O Expansion Modules. See Appendix B:
Cables and Adaptors. See Appendix B:
Cables and Adaptors See Appendix B:
Cables and Adaptors. See MC-EDGE Radio Types and Installation Kits. See MC-EDGE Radio Types and Installation Kits. Connects CPU to I/O expansion module, and I/O expansion module to I/O expansion module. See Appendix B:
Cables and Adaptors. Send Feedback 19 MC-EDGE CPU The MC-EDGE CPU controls all components attached to the unit. It includes a plug-in board with either APX4000 + LTE modem + LoWan or APX4000 + LTE modem Figure 3 provides a general view of the MC-EDGE CPU. Figure 3. MC-EDGE CPU General View with and without Side Cover The MC-EDGE CPU panel includes status, user, power and communication port LEDs, a pushbutton, communication ports, antenna and ground connectors, and I/O connectors. Figure 4 shows the front view of the CPU. Figure 4. MC-EDGE Front View 20 Send Feedback Contact Us CPU Pushbutton The pushbutton on the MC-EDGE CPU front panel has several functions:
1. LED activation Hold the pushbutton pressed for one second to activate the LEDs for a preconfigured period of time. 2. Status indications - Press the pushbutton for three seconds to toggle between LED 3. Note : Please be aware Press button more than 10 Sec cause restart to the RTU pages (see MC-EDGE CPU LEDs). MicroControllers (CPU+I/O) CPU LEDs The MC-EDGE CPU front panel includes a power LED, status LEDs for onboard DIs/DO, and status LEDs on the communication ports. Some of the LEDs are single color (green) and some are bicolor LEDs (red or green). The LEDs are used to indicate various situations. Figure 5. CPU Front Panel LEDs By default, the CPU LEDs provide power, error, sleep mode, and DO status indications. Table 1-2 details the default display of the CPU LEDs (Page 0). To see DI status indications, press the pushbutton for three seconds, to toggle to Page 1. Table 1-3 details the additional Page 1 CPU LEDs functionality. To toggle back to Page 0, press the pushbutton for again for three seconds. Send Feedback 21 Table 2. CPU LEDs Page 0 (Default Display) LED Name Description Status Power/Error LED Off - Unit is powered off. Low input voltage fault state, when the Steady Green - Unit is powered on. Steady Red - Unit is powered on with errors in the Error Logger. Fast Blinking Green (once per second) - Unit is in boot state. Medium Blinking Red or Green (once every 10 seconds)
-
processor is off. Slow Blinking Red or Green (once every 30-90 seconds)
- Unit is in sleep mode. Reset state: The LED is off. Set state: The LED is on (green). N/A N/A 1 2 3 DO Status Not in Use Not in Use Table 3. CPU LEDs - Page 1 (DI Display) LED Name Description Status Power/Error LED Fast Blinking Green (once in every 2 seconds) -
1 2 3 DI1 Status DI2 Status DI3 Status Unit is powered on in Page 1. Fast Blinking Red (once in every 2 seconds) -
Unit is powered on with errors in the Error Logger. Green - A powered-on DI is On (high from 6-30V). Off - DI is Off (low 03 V). Green - A powered-on DI is On (high from 6-30V). Off - DI is Off (low 03 V). Green - A powered-on DI is On (high from 6-30V). Off - DI is Off (low 03 V). Table 4. CPU Port LEDs Description Status 22 Send Feedback Contact Us Ethernet 10/100 port LED RS232/RS485 Port (UART1) LEDs I/O Expansion Modules Green - Unit is connected to Ethernet. Green Blinking Transmitting/receiving data Green - Transmitting data Yellow - Receiving data The MC-EDGE RTU can include up to I/O expansion modules. Four I/O module types are available:
Input module with mixed 12 DI and 8 AI 4-20mA Input module with mixed 12 DI and 8 AI 0-5V 1. 2. 3. Output module with mixed 8 DO and 2 AO 4. Mixed IO module with 7 DI 6DO 4 AI 1 AO The I/O modules are attached in a daisy-chain, with the first module attached to the CPU, and the next module attached to the first. A cable with two RJ50 connectors is used to connect the I/O module to the CPU or to another I/O module. Each I/O module includes a power LED, a link LED (future use), individual I/O status LEDs, and an array of I/O connectors. An I/O module can only be added/removed to/from an MC-EDGE unit when the power to the unit is off. For detailed specifications of each I/O expansion module, see Appendix A:
General Specifications. Figure 6 depicts the Input expansion module without a cover and with a cover. Figure 7 depicts the Output expansion module without a cover and with a cover. Figure 8 depicts the Mixed I/O expansion module without a cover and with a cover Send Feedback 23 Figure 6. MC-EDGE Input Expansion Module General View Figure 7. MC-EDGE Output Expansion Module Front View with Cover General View Front View with Cover 24 Send Feedback Contact Us Figure 8. 1-8 MIXED IO Module General View MC-EDGE I/O Module LEDs Front View with Cover The I/O module LEDs are used to indicate module and I/O status. LED indications are arranged according to the pins in the connectors. The Input module has one LED indication for each I/O. The Output module has two LED indications for each DO and one LED indication for each AO. See Table 1-5, Table 1-6, and Table 1-7 for LED functionality of the modules. The Mixed IO Module has Two LED indications for each DO and one LED indication for AO one LED indication for each input. Table 5. Input Module LEDs LED Name Description Power LED Link LED DI1-DI12 DI Status AI1 - AI8 AI Status Status Off I/O module is powered off. Steady Green I/O module is powered on. Fast Blinking Green (once per second) I/O module is in boot state. Green Proper Communication with Main CPU Red - No Communication with Main CPU. Green - A powered-on DI is On (high from 6-30V). Off - DI is Off (low 0-3V). Green - AI value is in range (0-20mA, 4-20mA, or 0-5V). Send Feedback 25 Table 6. Output Module LEDs Red - AI value is not in range. LED Name Description Power LED Link LED NC1/NO1 -
NC4/NO4 EE DO Relay Status R1-r/R1-s
- R8-r/r8-s ML DO Relay Status Status Off I/O module is powered off. Steady Green I/O module is powered on. Fast Blinking Green (once per second) I/O module is in boot state. Green Proper Communication with Main CPU Red - No Communication with Main CPU. Default (non-operated) state:
The NC# LED is on (green). The NO# LED is off. The NC# (normally closed) pin is connected to the COM# pin. Operate state:
The NC# LED is off. The NO# LED is on. The NO# (normally open) pin is connected to the COM# pin. Reset state:
The R#_r LED is on (green). The R#_s LED is off. The R#_r pin is connected to the COM# pin. Set state:
The R#_r LED is off. The R#_s LED is on (green). The R#_s pin is connected to the COM# pin. AOv1/2, AOi1/2 AO Status Table 7 Mixed IO Module LEDs NOTICE: The ML relay can be configured via software to preserve or reset the DO status at startup. Green - AO is active. Off - AO is not active. 26 LED Name Description Power LED Link LED Status Off I/O module is powered off. Steady Green I/O module is powered on. Fast Blinking Green (once per second) I/O module is in boot state. Green Proper Communication with Main CPU Red - No Communication with Main CPU. Send Feedback Contact Us EE DO Relay Status NC2/NO2 NC3/NO3 NC5/NO5 NC6/NO6 R1-r/R1-s
-R4-r/r4-
s ML DO Relay Status DI1-DI12 DI Status AI1 AI4 AI Status Default (non-operated) state:
The NC# LED is on (green). The NO# LED is off. The NC# (normally closed) pin is connected to the COM# pin. Operate state:
The NC# LED is off. The NO# LED is on. The NO# (normally open) pin is connected to the COM# pin. Reset state:
The R#_r LED is on (green). The R#_s LED is off. The R#_r pin is connected to the COM# pin. Set state:
The R#_r LED is off. The R#_s LED is on
(green). The R#_s pin is connected to the COM#
pin. NOTICE: The ML relay can be configured via software to preserve or reset the DO status at startup. Green - A powered-on DI is On (high from 6-30V). Off - DI is Off (low 0-3V). Green - AI value is in range (0-20mA, 4-20mA, or 0-5V). Red - AI value is not in range. Send Feedback 27 MC-EDGE Input Module I/O Arrangement In the Input module, the upper 20 pins belong to the 12 Digital Inputs (DI). DIs are arranged in groups of three pins, e.g. DI1:COM1-2:DI2. Each group is isolated one from the other and has its own COM pin. PGNDDI pins must be connected to protected ground (ground screw). The lower 20 pins of the Input module belong to the 8 Analog Inputs (AI). AIs are arranged in couples with positive and negative pins. Each AI channel is isolated from the other and isolated from the logic circuit. PGNDAI pins must be connected to protected ground (ground screw). AIs are calibrated in the factory. Figure 9. MC-EDGE Input Module I/O Arrangement For details on AI calibration, see the "MC-EDGE Hardware Test" section of the MC-EDGE Easy Configurator User Guide. MC-EDGE Output Module I/O Arrangement In the Output module, the upper pins belong to the 8 Digital Outputs. The first four DOs are Electrically Energized (EE). The EE DOs are arranged in groups of three pins per relay, e.g. NC1:COM1:NO1. The second four DOs are Magnetically Latched (ML). The ML DOs are arranged in groups of three pins per relay, e.g. R5-r:COM5:R5-s. Each group is isolated from the other and has its own PGNDDO pin. PGNDDO pins must be connected to protected ground (ground screw). The lower pins of the Output module belong to the 2 Analog Outputs (AO). The AOs are arranged in groups of three pins, e.g. AOv1+:AO1-:AOi1+. 5. AOv1+:AO1- and AOv2+:AO2- are Voltage output pins. 6. AOi1+:AO1- and AOi2+:AO2- are current output pins. The PGNDAO pins must be connected to protected ground (ground screw). The AOs are calibrated in the factory. 28 Send Feedback Contact Us Figure 10. MC-EDGE Output Module I/O Arrangement For details on AO calibration, see "MC-EDGE Hardware Test" section of the MC-EDGE Easy Configurator User Guide. For pin table details and I/O module block diagrams, see Appendix C: MC-EDGE I/O References. MC-EDGE Mixed I/O Module Arrangement In the Mixed module the upper pins belong to the 6 Digital outputs DOs 1 & 4 are Magnetically Latched (ML). The ML DOs are arranged in groups of three pins per relay, e.g. R4-r:COM4:R4-s. Each group is isolated from the other and has its own PGNDDO pin. PGNDDO pins must be connected to protected ground (ground screw). DOs2-3-5-6 are Electrically Energized (EE) . The EE DOs are arranged in groups of two pins per relay, e.g. COM2:NO2 There are 4 AI inputs located in the Middle of the module AIx+ - AIx-
The 1 AO voltage or current are located on the bottom of the module AOV+, AOI+, AO-
Send Feedback 29 30 Send Feedback Contact Us MC-EDGE I/O Module Terminal Block Connectors Each I/O module is equipped with a set of two terminal block (TB) connectors (5 mm pitch), with 20 pins each. Each TB connector has a fixed female side on the module and two male plugs for the sensor/device wire connection. The TB male side (#FHN0061A) is screw type for up to 2mm (12 AWG) wire. See MC-EDGE Installation chapter for details on connecting MC-EDGE I/Os. A TB extractor tool (FKN0024A) is provided for easy removal of TBs. See MC-EDGE Installation chapter for details on extracting the TB connectors from the module. MC-EDGE Hardware Test The MC-EDGE unit can be tested using the Web browser-based MC-EDGE Easy Configurator tool. The tests include retrieving general information, performing I/O operations, setting power management profiles, testing LEDs, and testing service mode. In addition, the user C application can call system services to retrieve information from the main board and to set the main board DO. For more information, see "MC-EDGE Hardware Test" section of the MC-EDGE Easy Configurator User Guide. MC-EDGE Antennas Only the approved antenna listed below can be used with the MC-EDGE. 1. BMLPVMBLTENGP-VP: MLPV Low-Profile Vertical Antenna for 698-960 MHz, 1710-2700 MHz 2. MWV1365S: WIDEBAND VHF NO TUNE ANTENNA for 132-174 MHz 3. MWU4002S: Wideband No Tune UHF ANT Antennas for 380-520 MHZ 4. MC-EDGE Models, Options and Accessories MC-EDGE Ordering available options The following MC-EDGE models and options are available:
1. F0016A - MC-EDGE CPU module 2. F0043A - ACE1100 FEP (VA00154AA) 3. VA00007AA /FLN0050A - 12DI/8AI 20mA module 4. VA00047AA /FLN0051A - 12DI/8AI 5V module 5. VA00008AA /FLN0052A - 8DO/2AO 10V, 20mA module 6. VA00598AA/FLN0116A - 7 DI 6DO 4 AI 1 AO module 7. FLN0100A APX 6500Li Installation Kit 8. VA00710AA - APX4000 VHF FOR MC-EDGE 9. VA007111AA - APX4000 UHF R1 FOR MC-EDGE 10. VA00712AA - APX4000 UHF R2 FOR MC-EDGE 11. VA00713AA - APX4000 700/800 FOR MC-EDGE 12. VA00714AA - APX4000 900 FOR MC-EDGE Send Feedback 31 13. VA00715AA - LTE VERIZON USA/CANADA MODEM FOR MC-EDGE 14. VA00726AA - LORA 902 - 928 MHZ USA/CANADA MODEM FOR MC-EDGE
(Future Option) 15. MC-EDGE I/O configuration available options The following configurations are available for MC-EDGE systems:
1. MC-EDGE CPU only (F0016A) 2. MC-EDGE CPU + 12DI/8AI (20mA or 5V) module 3. MC-EDGE CPU + two 12DI/8AI (20mA or 5V) modules 4. MC-EDGE CPU + 12DI/8AI (20mA or 5V) module+ 8DO/2AO module 5. MC-EDGE CPU + 8DO/2AO module 6. MC-EDGE CPU + two 8DO/2AO modules 7. MC-EDGE CPU + Mixed IO module 8. MC-EDGE CPU + two Mixed IO modules 9. MC-EDGE CPU + Mixed IO module+2DI/8AI (20mA or 5V) module 10. MC-EDGE CPU + Mixed IO module+8DO/2AO module MC-EDGE I/O accessories options The following accessories are available for MC-EDGE systems:
1. VA00015AA/FHN0054A - DIN Rail 26 CM 2. FHN0057A - DIN Rail Stopper 3. FHN0058A - CPU Cable Cover 4. FHN0059A - I/O Module Cable Cover 5. FHN0060A - SD Cover 6. FHN0061A - Terminal Block Male 10 PIN 5MM 7. FHN0062A - Terminal Block Male 3 PIN 5 MM 8. FHN0063A - Terminal Block Male 2 PIN 5 MM 9. FHN0064A - Terminal Block Male 4 PIN 3.5MM 10. FHN0065 - RJ50 I/O Module Cable 11. FKN0022 - RS232 Data Cable Adaptor 12. VA00153AA/FKN0024A - Terminal Block Connector Extractor 13. FKN0030 - RS485 Port 120 OHM Termination Cable 14. VA00155AA/FKN0033 - DC Power Cable The full list of MC-EDGE options and accessories are listed in the MC-EDGE System Planner. MC-EDGE External Power Supply or Battery 32 Send Feedback Contact Us The MC-EDGE can be ordered with an external AC/DC power supply. These are drop ship items that are provided with the MC-EDGE unit. The following power supplies are available:
1. Lambda Electronics DPP120-12-1 AC power supply 12VDC/10A, 120W, 90-264VAC
(mounted on DIN rail) DC output 2. Artesyn ADN5-24-1PM-C AC power supply 24VDC/5A, 120W, 85-264VAC (mounted on DIN rail) DC output, Limited temp. -25 - +70 Alternatively, a customer- supplied AC/DC power supply or DC power source (DC/DC converter or battery) can be used. See the MC-EDGE input voltage and power consumption specifications in Appendix A: MC-EDGE Specifications.) MC-EDGE External Devices The following external devices have been tested and certified as compatible with the MC-EDGE:
1. Serial data modem (Data radio): MDS SD Series 2. Cellular/general PPP: Siarra wireless - AirLink FXT edge, Maxson intelimax, Telit-
Gate Tel GT-HE910-EUD 3. External/Null modem: Westremo TD36 4. Astro ( IV&D) radio: APX 4000, APX 6500 5. MOTOTRBO radio: XPR 5350/80, XPR 7350/80 6. SanDisk Cruzer Blade (SDZ50-032G) and SanDisk Cruzer Blade (SDZ50-004G) 7. GPS Receiver: NMEA-0183 Send Feedback 33 Other similar devices can be used with MC-EDGE. NOTICE: It is the users responsibility to validate compatibility of any other devices. CAUTION: Do not remove a storage device from the USB Host port while the MC-EDGE unit is in sleep mode. MISES EN GARDE: Ne retirez pas un priphrique de stockage du port hte USB alors que l'unit MC-EDGE est en mode veille Disposal of Components All components of the MC-EDGE should be properly disposed of, in accordance with local regulatory standards and laws. MC-EDGE Installation General The MC-EDGE is shipped from the factory ready for mounting on a wall or in a customer's enclosure. WARNING:
Installation of the MC-EDGE should be done only by authorized and qualified service personnel in accordance with the US National Electrical Code. Only UL Listed parts and components will be used for installation. Use UL Listed devices having an environmental rating equal to or better than the enclosure rating to close all unfilled openings. If the installation involves high-voltage connections, technicians must be specifically qualified to handle high voltage. AVERTISSEMENT:
L'installation de l'unit MC-EDGE doit tre effectue exclusivement par le personnel de service autoris et qualifi, conformment au code national de l'lectricit des tats-
Unis. Seuls des pices et composants identifis UL seront utiliss pour l'installation. Utiliser des appareils identifis UL dont l'indice de protection environnementale est gal ou suprieur l'indice de protection du botier pour fermer toutes les ouvertures non couvertes. Dans les cas o l'installation comporterait des connexions haute tension, les techniciens doivent tre spcialement qualifis pour travailler avec cette haute tension. 34 Send Feedback Contact Us INSTALLATION CODES This device must be installed according to the latest version of the country's national electrical codes. For North America, equipment must be installed in accordance to the applicable requirements in the US National Electrical Code and the Canadian Electrical Code. INTERCONNECTION OF UNITS Cables for connecting RS232 and Ethernet Interfaces to the unit must be UL-certified type DP-1 or DP-2. (Note-
when residing in a non LPS circuit.) Do not remove the SD card when the unit is energized. OVERCURRENT PROTECTION A readily accessible 2-pole Listed branch circuit overcurrent protective device rated 20 A must be incorporated in the building wiring. CAUTION: If the MC-EDGE is subject to high levels of shock or vibration, you must take suitable measures to reduce the acceleration or amplitude. We recommend that you install the MC-EDGE on vibration-damping materials (for example, rubber-metal anti-vibration mountings). CODES D'INSTALLATION Cet appareil doit tre install conformment la plus rcente version des codes nationaux de l'lectricit du pays. En Amrique du Nord, l'quipement doit tre install conformment aux exigences en vigueur dans le code national de l'lectricit des tats-Unis et le Code canadien de l'lectricit. INTERCONNEXION DES UNITS Les cbles pour la connexion des interfaces RS232 et Ethernet l'unit doivent tre certifis UL type DP-1 ou DP-2. (Remarque-
dans un circuit non LPS.) Ne pas retirer la carte SD lorsque l'unit est sous tension. PROTECTION CONTRE LA SURINTENSIT Un appareil de protection contre les surintensits dans le circuit de drivation, de 20 A et deux ples, doit tre intgr dans le cblage de l'difice. MISES EN GARDE: Si le module MC-EDGE est soumis des niveaux levs de chocs ou de vibrations, vous devez prendre des mesures adquates pour en rduire l'acclration ou l'amplitude. Nous vous recommandons d'installer le module MC-EDGE sur une surface qui attnue les vibrations (sur un support de mtal et caoutchouc antivibration, par exemple). Cbles Ethernet LAN, RS485 et E/S peuvent avoir un maximum de 100 mtres. Ethernet LAN, RS485 and I/O cables can be a maximum length of 100m. Mounting the MC-EDGE on a DIN Rail The MC-EDGE is mounted on a customer-supplied 35 cm DIN rail, which can be installed either on a wall or in a plastic or metal enclosure. Figure 11 shows the dimensions of the unit. Allow an additional 5 cm (2") (in W, H) and 10 cm (4") (in D) around the unit. When mounted in an enclosure, allow an additional 6 cm (2.4")
(in W, H) and 7 cm (2.75") (in D) around the enclosure. Send Feedback 35 Figure 11. Dimensions of MC-EDGE Unit Prerequisite: Before performing this procedure, secure the DIN rail using at least three M5 screws and three M5 washers. Prerequisite: Connect the MC-EDGE CPU to any I/O expansion modules before mounting on the DIN rail. See Procedure 2-2. Send Feedback 36 Contact Us Procedure 1. Mounting the MC-EDGE on a DIN Rail 1. Slide the supplied plastic tab at the back of the unit all the way down to the bottom of the unit. See Figure 12. If the MC-EDGE unit includes one or more I/O expansion modules, repeat this step for all I/O expansion modules. Figure 12. Plastic Tab in the MC-EDGE Unit 2. Lift the MC-EDGE unit and hang onto the DIN rail, using the hooks in the back of the unit. See Figure 13. Figure 13. Hooking the MC-EDGE Unit onto the DIN Rail 3. Slide the plastic tab upwards, until it locks against the DIN rail. See Figure 13. If the MC-EDGE unit includes one or more I/O expansion modules, repeat this step for all Send Feedback 37 I/O expansion modules. See Figure 14. Figure 14. Hooking the MC-EDGE Unit with I/O Expansion Module onto the DIN Rail 4.
(Optional) Clip two stoppers onto the DIN rail, one to the left and one to the right of the unit to keep the unit in place. Tighten the built in screws. 5. Connect the data cables to the unit. See Connecting MC-EDGE Data Cables. 6. Connect the I/O sensors. See Connecting MC-EDGE I/Os. 7. Bundle the cables and attach them to the fastener on the module. See Bundling MC-EDGE Cables. Insert the four legs of the front cover into the matching grooves on the front of each module and slide the cover down. 8. Connecting an I/O Expansion Module to the MC-EDGE CPU The I/O expansion modules must be connected to the MC-EDGE CPU before mounting the unit on the DIN rail. Follow the procedure below to connect an I/O expansion module to the MC-EDGE CPU. Procedure 2. Connecting an I/O Expansion Module to the MC-EDGE CPU 1. Insert a narrow tool (e.g. flat screwdriver) into the groove of the side cover on the right side of the MC-EDGE CPU and remove the cover. 38 Send Feedback Contact Us Figure 15. MC-EDGE CPU Side Cover 2. Click the 90 bent end of the 10-pin I/O connector cable (#30013144001) into the RJ50 connector on the right side of the CPU. See Figure 16. Figure 16. MC-EDGE CPU Connection to I/O Expansion Module Send Feedback 39 3. Click the other end of the I/O 10-pin connector cable into the RJ50 connector on the left side of the I/O expansion module. See Figure 16. 4. With the front of the modules facing you, press the CPU and I/O expansion modules together while sliding the bolts on the I/O expansion module into the slots on the CPU. Be careful not to pinch the cable between the modules. 5. Press the I/O expansion module slightly back and the CPU module slightly forward until they click. Connecting an I/O Expansion Module to another I/O Expansion Module Follow the procedure below to connect more than one I/O expansion module to the MC-EDGE unit. Procedure 3. Connecting an I/O Expansion Module to another I/O Expansion Module 1. Remove the cover from the right side of the MC-EDGE I/O expansion module. 2. Click the 90 bent end of the 10-pin I/O connector cable into the RJ50 connector on the right side of the leftmost I/O expansion module. See Figure 17. Figure 17. MC-EDGE I/O Expansion Module Connection to I/O Expansion Module 40 3. Click the other end of the I/O 10-pin connector cable into the RJ50 connector on the left side of the next I/O expansion module. See Figure 17. 4. Press the two I/O expansion modules together while sliding the bolts on the rightmost module into the slots on right side of leftmost module. Be careful not to pinch the cable between the modules. 5. Press the rightmost module slightly back and the leftmost module slightly forward until they click. Send Feedback Contact Us MC-EDGE Power and Ground Connections All internal electrical connections are performed in the factory and supplied with the RTU. During installation, only the main power and ground must be connected. The procedures for the main power, ground and battery connections are provided below. WARNING: The power and ground connections should be performed only by qualified and authorized service personnel. All power and ground connections must be in accordance with local standards and laws. AVERTISSEMENT: Les connexions d'alimentation et de mise la masse doivent uniquement tre effectues par un personnel de service qualifi et autoris. Toutes les connexions d'alimentation et de mise la masse doivent tre conformes aux normes et aux lois locales. NOTICE: Make sure that the ground cable is long enough to reach the grounding point, but as short as possible. The wire gauge of the ground wire in the cable must be 6 AWG. Only a single wire can be connected to a contact in the Terminal Block connector. Wire size for the CPU Power connector must be AWG 12. Connecting the MC-EDGE to Power and Ground Follow the procedure below to connect the MC-EDGE unit to power and ground. See Figure 2- 9 and Figure 2-10. Procedure 4. Connecting the MC-EDGE to Power and Ground 1. Once the MC-EDGE unit (including any I/O expansion modules) is installed on the DIN rail, mount the power supply (not supplied) nearby. 2. Connect one end of the DC power cable (FKN0033) to the 9-30 VDC power supply
(red to + and black to -). NOTICE: The DC power cable includes a 5A fuse. Figure 18. MC-EDGE DC Power Cable with Fuse Send Feedback 41 3. Connect the other end of the power cable to the DC power connector on the front panel of the MC-EDGE unit. 4. Connect the yellow wire from the power cable to the grounding screw on the front panel of the MC-EDGE unit. 5. Connect the protective ground cable (optional FKN0034) between the grounding screw on the unit (CPU or I/O expansion module) (ground screw nuts torque 4 LB-IN) to the grounding point outside of the enclosure. In an MC-EDGE unit with I/O expansion, all grounding strips should be connected to a common grounding point. 6. Bundle the cables as described in Bundling MC-EDGE Cables. 7. Connect the power supply power cable (AC power cable is not supplied). 42 Send Feedback Contact Us Figure 19. MC-EDGE Power and Ground Connections Figure 20. MC-EDGE with I/O Expansion Power and Ground Connections Send Feedback 43 Connecting MC-EDGE Data Cables Follow the procedure below to connect the data cables to the MC-EDGE RTU ports. Procedure 5. Connecting the MC-EDGE Data Cables 1. Connect the data cable(s) (RS232, RS485, LAN) from the MC-EDGE CPU to the appropriate device(s). For details, see Appendix B: Cables and Adaptors. 2. Bundle and attach the cable(s) to the fastener on the CPU module, as described in Bundling MC-EDGE Cables. Connecting MC-EDGE I/Os Follow the procedure below to connect a user-supplied I/O sensors/device to the MC-EDGE RTU I/O modules. NOTICE: Only a single wire can be connected to a contact in the TB connector. Wire size for the CPU I/O connectors can be AWG 16,18,20,22,24,30. Wire size for the I/O expansion module connectors can be AWG 12,14,16,18,20,22,24,26. Wire size for the PGND in must be AWG 12. Procedure 6. Connecting the MC-EDGE I/Os 1. Using a small flat screwdriver, loosen the screws on the TB connector (#FHN0061A). Insert the exposed wire tips from the I/O sensors/devices. Tighten the screws (torque 2 LB-IN). 2. Line the TB connector up to the corresponding connector on the I/O module and press it forward into the module, as shown in Figure 22. Then press downwards to lock. 44 Send Feedback Contact Us Figure 22. MC-EDGE I/O Module with TB Connector 3. Bundle and attach the I/O cables to the fastener on the I/O module, as described in Bundling MC-EDGE Cables. Bundling MC-EDGE Cables All MC-EDGE cables must be bundled in a tear-off cable tie for strain relief at the bottom of the modules front panel. Follow the procedure below to bundle the MC-EDGE cables. Procedure 7. Bundling the MC-EDGE Cables 4. Once all cables are connected to the module, collect all cables in one or more tear-off cable tie(s) (not supplied). See Figure 23. 5. Thread the cable tie through the plastic fastener at the bottom of the front panel. See Figure 24. Send Feedback 45 Figure 23. MC-EDGE Cables in Plastic Fastener 6. Slide the pointed tip of the cable tie through the head and pull tightly. 7. Snip off the extra plastic at the end of the tie. Extracting Terminal Block Connectors from the I/O Module Follow the procedure below to extract the TB connector from an MC-EDGE I/O module. Procedure 8. Extracting the TB Connector from the I/O Module 8. Lift and remove the cover of the I/O module to expose the TB connectors. (See I/O module with and without cover in Figure 3.) 9. Position the TB extractor to the right of the preferred TB connector, and fit the curved tip behind the TB. (See Figure 24) 10. Press down on the TB extractor and rotate counter clockwise, and then rotate clockwise to extract the TB connector from the I/O module. 46 Send Feedback Contact Us Figure 24. TB Extractor on TB Adding an Optional SD Card Follow the procedure below to add an optional SD card (not supplied) to an MC-EDGE CPU. Procedure 9. Adding an Optional SD Card 1. Using a Phillips screwdriver, loosen the screw on the SD cover (torque 2 LB-IN). See Figure 25. 2. Gentle pull the screw outwards, on its axis, to remove the SD cover. Send Feedback 47 Figure 25. MC-EDGE CPU SD Cover Connecting Antennas to the MC-EDGE Once the MC-EDGE unit is installed, install the supplied antennas and connect the antenna cable connectors on the front panel of the MC-EDGE unit. Before installing the antennas, read the installation instructions provided with each antenna installation kit. NOTICE: Before installing the antennas, refer to RF Energy Exposure Training and Product Safety Information for Fixed Site Infrastructure Installed as Fixed Site Stations guide P.N: MN004607A01-A To install the MC-EDGE, refer to Figure 26. 48 Send Feedback Contact Us Figure 26. Outdoors Installation of MC-EDGE Antennas Send Feedback 49 Replacing the MC-EDGE DC Power Cable Fuse Follow the procedure below to replace the fuse on the MC-EDGE DC power cable
(FKN0033). Procedure 10. Replacing the MC-EDGE DC Power Cable Fuse 1. Remove the faulty 5A fuse from the fuse holder. See Figure 18. 2. Plug the new 5A fuse (# 6580283E03) into the fuse holder. 50 Send Feedback Contact Us Optional Auxiliary Radios and Installation Kits MC-EDGE Supported Radio Types The MC-EDGE RTU supports a set of radios. See Table 8. The APX and MOTOTRBO radios are connected to the USB OTG port. The TETRA radio and the modems are connected to an RS232 port. For information on configuring CPU ports for various radios/modems, see the MC-EDGE Easy Configurator User Guide. All the radios listed below are external radios and should be operated according to their specifications. For complete radio specifications such as modulations, standards, Tx power output, Rx sensitivity, supply voltage, and power consumption, see the specific radio owners manual. Table 8. MC-EDGE Auxiliary Radios Description APX 6500Li P25 Mobile Radio, 136-174 MHz, 10-
50W APX 6500Li P25 Mobile Radio, 380-470 MHz, 10-
40W APX 6500Li P25 Mobile Radio, 450-520 MHz, 10-
45W APX 6500Li P25 Mobile Radio,764-870 MHz, 10-35W Nomenclature M25KSS9PW1 N VHF Band 136-174 MHz M25QSS9PW1 N UHF R1 380-470 MHz M25SSS9PW1 N UHF R2 450-520 MHz M25URS9PW1 N 7/800M 764-870 MHz Installation Kits for MC-EDGE Auxiliary Radios The following radio installation kits enable the user to install a radio in the MC-EDGE RTU. Table 9. Installation Kits for MC-EDGE Auxiliary Radios Radios APX 6500Li TETRA MTM5200 Option/Kit FLN0100A FLN0043A Send Feedback 51 For instructions on mounting the radio near the MC-EDGE unit, see the relevant installation instructions below. NOTICE: A Torx screwdriver is required for the installation kits. MTM5200, MOTOTRBO XPR 5350 and APX 6500 Radio Installation Kits The MTM5200, MOTOTRBO XPR 5350 and APX 6500 radio installation kits (MC-EDGE options FLN0043A, FLN0093A, VA00245AA and FLN0100A) enables the user to install the MTM5200, MOTOTRBO XPR 5350 and APX 6500 radios near the ACE100 RTU. The following hardware and firmware are required:
1. MC-EDGE firmware 1.00 and above 2. ACE3600 System Tools Suite (STS) version 18.50 and above The FLN0043A, FLN0093A, FLN0115A, FLN0100A installation kits include brackets, cables, and screws. Note the MTM5200 works with the RS232 cable and RJ45 to DB9 adaptor (FKN022A). This is not the same adaptor that is used with the ACE3600. Installing the Mobile Radio Installation Kits Follow the procedure below to install the MTM5200, MOTOTRBO XPR 5350 and APX 6500 radio installation kits (FLN0093A, VA00245AA, FLN0042A, and FLN0100A). Procedure 11. Installing the Mobile Radio Installation Kits 1. For the MOTOTRBO XPR 5350 and MTM5200 radios, adjust the bracket size. See Making the Bracket Smaller for MOTOTRBO XPR 5350 and MTM5200 Radios. 2. Place the bracket assembly (see Figure 3-1) on the DIN rail with the bracket hooked over the top of the DIN rail (see Figure 3-2.) Figure 27. MTM5200, MOTOTRBO XPR 5350 and APX 6500 Radio Installation Kit Bracket Assembly 52 Send Feedback Contact Us Figure 28. MTM5200, MOTOTRBO XPR 5350 and APX 6500 Radio Installation Kit Bracket Assembly on DIN Rail 3. Push the back bracket up to lock the bracket assembly on the DIN rail. 4. Using a Torx T8 screwdriver, tighten the four screws in the bracket (See Figure 28). 5. Connect the data cable (FKN0027 9-pin connector for MTM5200, FKN0026 26-pin connector for XPR 5350 digital mode, CB000344A01 26-pin connector for XPR 5350 Connect Plus mode, and FKN0035 26-pin connector for APX 6500) to the Accessory connector on the back of the XPR 5350/ APX 6500 radio, or on the front of the MTM5200. 6. Connect the DC power cable (FKN0036) to the Power connector on the radio. 7. Put the radio into the bracket assembly, lining up the holes on the sides of the radio with holes on the side of the bracket (see holes in Figure 27 ). 8. For the APX 6500 radio, using an Allen wrench, screw in the four supplied screws, to attach the radio to the bracket assembly. See Figure 29. 9. For the MTM5200 and MOTOTRBO XPR 5350 radios, manually screw in the two supplied wing screws, to attach the radio to the bracket assembly. See Figure 30 and Figure 31. Send Feedback 53 Figure 29. APX 6500 Radio on DIN Rail Figure 30. XPR 5350 Radio on DIN Rail 54 Send Feedback Contact Us Figure 31. MTM5200 Radio on DIN Rail 10. (Optional) Clip two stoppers (see Figure 3-3, Figure 3-4, Figure 3-5) onto the DIN rail, one to the left and one to the right of the radio, to keep the radio in place. Tighten the built in screws. 11. Connect the communication cable to the MC-EDGE CPU module port configured for the radio (USB for APX 6500 and XPR 5350, or RS232 for MTM5200). See Configuring the RTU Port Type for the APX 4000/APX 6500 Radio below. 12. Connect the antenna cable/antenna according to the radio instructions. Before operating the radio, the MC-EDGE RTU port must be configured for the radio, and the radio may need to be programmed using the appropriate CPS. Configuration and Programming for the ASTRO APX 4000/APX 6500 Radio To enable MDLC communication using the APX 4000/APX 6500 radio in an MC-EDGE-only system, configure the port via Web browser. See the Configuring Communication in an MC-EDGE RTU section of the MC-EDGE Easy Configurator User Guide. To configure the radio in a mixed system, see the procedure below. Configuring the RTU Port Type for the APX 4000/APX 6500 Radio Procedure 16. Configuring the MC-EDGE Port for the APX 4000/APX 6500 Radio 1. 2. In the ACE3600 STS click on the preferred site, and open the site view. In the Port Tab, click on the USB port through which the RTU will communicate with the APX 6500 radio. 3. Confirm that the port parameters and data speed are as shown in the screen below. 4. Define preferred links. Send Feedback 55 5. Save the changes. RTU Port Type Advanced Parameter Configuration (for APX 4000/APX 6500 Radio) Figure 44. RTU Site Configuration for MDLC over ASTRO APX Radio Advanced Parameters Generally no other changes are required to Advanced Physical or Link Layer parameters. For information on these parameters, see the MDLC over IP chapter of the ACE3600 STS Advanced Features manual. Procedure 17. Configuring the Advanced Parameters of the MC-EDGE Port for the ASTRO APX Radio If any changes are required, click on the appropriate screen in the Port Tab. 1. 2. Change the settings as necessary. NOTICE: The Default Group ID Address should be left 000.000.000. The actual values will be read by the RTU from the radio upon connection. 3. Save any changes. 4. Save the project. 5. Download the site configuration to the MC-EDGE RTU. IP Conversion Table for the APX 4000/APX 6500 Radio Prepare an IP conversion table if the RTU must communicate with another RTU or an IP Gateway. In the IP conversion table, specify the IP address of each RTU port (site ID +
link ID). This IP address is assigned by the infrastructure operator. Note that an IP address is obtained from the radio once it is connected to the RTU port over 56 Send Feedback Contact Us USB. The IP address obtained from the radio is not the real IP address set by the infrastructure, but rather a dummy address. This dummy is configured in the radio via the CPS Mobile Computer IP address parameter (by default 192.168.128.2). When device LINxL level 0 is retrieved using the MC-EDGE STS Software Diagnostics tool, the IP Address displayed is this dummy address and not the actual IP address assigned by the infrastructure operator. It is recommended to create two IP conversion tables:
1. The first is downloaded to the FIU or IP Gateway on the LAN and includes the site and IP information for each RTU. 2. The second is downloaded to all RTUs which are connected to the infrastructure with ASTRO IV&D radios, and includes the site and IP information for the FIU and IP Gateway. For detailed instructions on preparing the IP conversion table, refer to the MDLC over IP Communication chapter of the ACE3600 STS Advanced Features manual. APX 4000/APX 6500 Radio Programming using CPS The APX 4000/APX 6500 radio is programmed for MC-EDGE in the factory and is ready for digital ASTRO IV&D trunked communication. For user programming of site-specific parameters, the radio should be brought to the Motorola Service Center. Connecting the APX 4000/APX 6500 Radio To program the APX 4000/APX 6500 radio with Customer Programming Software (CPS), the radio must be connected to a PC. Procedure 18. Connecting the APX 4000/APX 6500 Radio to the CPS 1. Connect one end of the programming cable (PMKN4012B for APX 4000, HKN6184C for APX 6500) to the Accessory connector on the radio. The HKN6184C programming cable is not supplied and must be ordered separately. 2. Connect the other end to the USB port of a PC on which the ASTRO CPS software
(RVN4185) is installed. Disassembing the APX 6500 Radio If the APX 6500 radio is to be programmed at an authorized laboratory, disassemble the radio from the MC-EDGE unit as follows:
Procedure 20. Disassembling the APX 6500 Radio 1. Disconnect the antenna cable from the Antenna connector on the APX 6500 radio. 2. Disconnect the DC power cable (FKN0036) from the Power connector on the radio. 3. Disconnect the connector of the data cable (FKN0035) from the Accessory connector on the radio. 4. Using an Allen wrench, unscrew the four screws which attach the radio to the bracket assembly. See Figure 3-3. 5. Remove the radio from the DIN rail. 6. Take the radio to a laboratory to be programmed as described in CPS Programming Send Feedback 57 Settings below. Programming the APX Radio Follow the procedure below to change the APX 4000/APX 6500 radio settings for ASTRO IV&D trunking using the CPS. Procedure 21. Programming the APX Radio Settings 2. 1. Open the codeplug in the CPS (either by reading the radio or by opening the already saved codeplug). In the navigation pane extend the Codeplug Configuration tree and select the Radio Wide. In the Features section set the Ignition Switch to Soft Power Off. 3. 4. Extend the Radio Ergonomics Configuration branch, select the Radio Ergonomics Wide and in the Advanced section enable the Last selected Channel Per Zone Enable option. In the NAT List section, add an entry to the NAT List (the Plus sign):
5. Extend the Data Configuration branch and select the Data Wide. 6. 7. The WAN port should be set to the MDLC over IP port number (e.g. 2002). 8. The LAN port should be set to the MDLC over IP port number (e.g. 2002). 9. The Static NAT IP Address should be set to the Peer IP Address (e.g. 192.168.128.2). 10. Under the Data configuration branch, extend the Data Profile branch and select Profile 1. 11. In the General section, set the Data Profile Type to Trunking. 12. In the General section, disable the RX Voice Interrupts Data option. 13. In the Features section, enable the Terminal Data option. 14. Extend the Trunking configuration branch, then extend the Trunking System branch and select the Trk Sys 1. 15. In the General section:
16. Set the System Type to ASTRO 25. If the proper system key was loaded, the System Key field should already be enabled. 17. Set the System ID, Home WACN ID and Unit ID to values obtained from the radio system administrator. 18. Set the Coverage Type to SmartZone. 19. Select Profile 1 in the Data Profile Selection option box. 20. In the Control Channels section, enter the control channels with which the data subscriber should be able to affiliate. Consult your radio system administrator for the list of control channels. 21. In the ASTRO 25 Channel ID section, enable at least the first channel. 22. Under the Trunking configuration branch, extend the Trunking Personality branch 58 Send Feedback Contact Us and select the Trk Per 1. 23. In the Talkgroup section, set the radio talkgroup ID value in hexadecimal. Consult your radio system administrator for the talkgroup information. 24. Extend the Zone Channel Assignment branch and select the 1-Zone 1. 25. In the Zone section, set the Zone to the preferred zone name (e.g. ZONE1). 26. In the Channels section, 27. Add the amount of needed channels - Consult your radio system administrator for the talkgroup information. 28. Set the Channel name which will be displayed on the radio screen (if the radio is Model II or III). 29. Select the Channel Type as Trk in each channel 30. Select the Personality of that channel (if you have more than one trunking personality configurations). 31. Specify the Trunking Talkgroup of each channel. 32. Select File -> Save to save changes to the radio. 33. Select File -> Write Device to download the configuration to the radio. Infrastructure Configuration for the APX 6500 Radio In order for the MC-EDGE RTU to communicate over the ASTRO IV&D infrastructure using the APX 6500 digital radio, the infrastructure must be properly configured using the UCM (User Configuration Manager) tool. NOTICE: If configuring a border router or any firewall within the CEN
(Customer Enterprise network), make sure that the MC-EDGEs MDLC over IP UDP port number 2002 is enabled for inbound and outbound messages. In the UCM Radio User Data Settings tab, be sure to set the IP address as Static, to enable Generate ICMP and Source Address Checking, and the Ready timer set to 10 seconds. Set the Ignore Affiliation Inactivity Timeout setting to Enabled. ASTRO APX 6500Li Options for MC-EDGE All of the following options should be ordered with the APX 6500Li Radio:
Table 10. ASTRO APX 6500Li Options for MC-EDGE Option Name ADD: NO SPEAKER NEEDED APEX ADD: O5 CONTROL HEAD ADD: APX CONTROL HEAD SOFTWARE ADD: DASH MOUNT ADD: NO RF ANT NEEDED ADD: NO MICROPHONE NEEDED Send Feedback Option Number G142AD G442AJ G444AE G66AM G89AC G90AC 59 ADD: TDMA OPERATION ADD: DATA LINK MANAGER ENH: 9600 OR 3600 SINGLE SYSTEM DIG ADD: ENHANCED DATA APX GA00580AA QA00205AH QA02756AC QA03399AA 60 Send Feedback Contact Us Appendix A: MC-EDGE Specifications MC-EDGE General Specifications Table 14. MC-EDGE General Specifications Attribute CPU MODULE Processor Frequency ON-BOARD RADIOS LoRaWAN (Future Option) APX4000 Specifications TI Sitara Cortex A8 AM3356 microprocessor 600 MHz (default), 300 MHz in Low Power mode configuration
- Wireless Sensors Network Class 1, 8 Channels
- Radio Chipset: SX1301 & SX1257
- Freq range: 902 to 928 MHz
- RX Sensitivity: Up to -140dBM
- Max RF Output: +27dBm
- External Network Server - Optional
- Clear LoRa Optional Land Mobile Radio ASTRO P25 700/800:
- Tx Bands: 763-776,793-806 MHz / 806-825,851-870 MHz
- Rx Bands: 763-776 MHz / 851-870 MHz
- C.Spacing: 25/12.5 KHz
-RF OutPut Power: 1-3 W
- Rx Sensitivity (12dB SINAD):0.250uV VHF:
- Tx /Rx Bands: 136-174Mhz
- C. Spacing: 30/25/12.5 KHz
- RF OutPut Power: 1-5 W
- Rx Sensitivity (12dB SINAD):0.216uV UHF R1,R2:
- Tx Bands: 380-470,480-520 Mhz
- Rx Bands: 340-470,450-520 MHz
- C.Spacing: 25/12.5 KHz
-RF OutPut Power: 1-5 W
- Rx Sensitivity (12dB SINAD):0.234uV 900 MHz:
- Rx /Tx Bands: 896-902,935-941MHz
- C.Spacing: 12.5 KHz Send Feedback 61 LTE
-RF OutPut Power: 1-2.5 W
- Rx Sensitivity (12dB SINAD):0.236uV LTE Air Prime HL7588 B4 B13 per 3GPP Table 11.Supported Bands Transmit Band
(Tx) Receive Band
(Rx) Maximum Output Power 1710 to 1755 MHz 2110 to 2155 MHz 22.5 dBm (+/-
2dBm) Class 3bis 777 to 787 MHz 746 to 756 MHz 22.5 dBm (+/-
2dBm) Class 3bis RF Band LTE B4 LTE B13 Sim Interface 1.8V/3.3V support Conforms with ETSI UICC Specifications SIM/USIM support Table 13.Table Conducted RX Sensitivity (dBm) Frequency Band LTE B4 LTE B13 Full RB; BW:
20 MHz*
Full RB; BW:
10 MHz*
Primary
(Typical) Secondary
(Typical) SIMO
(Typical)
-94.5
-94.5
-97.5
-97.5
-98.5
-101.5
* Sensitivity values scale with bandwidth: x_MHz_Sensitivity = 10 MHz_Sensitivity 10*log (10 MHz/x_MHz) 256 MB, at least 32 MB available for user data 256 MB LPDDR memory, at least 32 MB available for user data Micro SD Card Slot for user logging or CRYPTR Up to 32 GB on Sandisk Cruzer Blade (SDZ50-032G) or 4GB on Sandisk Cruzer Blade (SDZ50-004G) (not supplied) SITARA TI AM3356 Cortex A8 microprocessor Clock: 600 MHz (default), 300 MHz (low power) Send Feedback MEMORY Flash DDR Micro SD Card Slot Optional user-supplied flash drive CPU 62 Contact Us Operating System Real Time Clock Internal Backup Battery Real Time Clock (RTC) POWER IN Input Voltage Power In Connector Power Consumption Linux (Kernel version 4.9) Hardware clock with year, month, date, day, hour, minute, and second supported. The backup battery can maintain the RTC for at least 30 days@ +25C, when main power is disconnected. 20ppm@25C or 2sec per day (24hours) @ 25C 0.04ppm/(0C)2 Hardware clock with year, month, date, day, hour, minute, and second Leap years support RTC crystal accuracy: max. 20ppm@25 C RTC crystal drift: 0.04ppm/ C RTC Internal Backup Battery Backup for at least 30 days @ 25 C 9-30 V DC 5mm pitch, Maximum 12 AWG CPU module All Radio Off: max. 300mA / typ. 150mA @ 12V (w/o SD card and USB) CPU module All Radio On: max. 450mA / typ. 250mA @ 12V (w/o SD card and USB) Input module: max. 180mA / typ. 100mA @ 12V Output module: max. 450mA / typ.250mA @ 12VMixed IO module: Max 194.4mA@12V/Typical 64mA@12V Sleep mode: typical 5.5 mA @12V Attribute ENVIRONMENTAL Physical Dimensions Weight DIN Rail Operating Temperature Storage Temperature Operating Humidity Housing Sealing Mechanical Vibrations Specifications 7.6 cm (W) x 15.9 cm (H) x 11.8 cm (D) (3" x 6.3" x 4.7" ) (WxHxD) The depth of the unit including the front cover is 14.59 cm (5.74"). The depth to the tip of the grounding screw is 13.73 cm (5.41"). Approx. 0.5 Kg Maximum thickness 1.0 mm Minimum length 26 cm
-30 C to +60 C (-4 F to 122 F)
-55 C to +85 C (-67 F to 185 F) 5% to 95% RH @ 50 C for 8 hours without condensation. For an uncontrolled humidity environment, it is recommended to use an enclosure IP30 EIA/TIA 603 Base station, Sinusoidal 0.07mm @ 10-30 Hz, 0.035 mm @ 30-60 Hz Send Feedback 63 Operating Altitude Communication Ports CPU ON-BOARD I/OS Digital Inputs Total Number of Inputs DI Fast Counter Input Mode Max. DC Input Voltage ON DC Voltage Range OFF DC Voltage Range Input Current DI Isolation to CPU Digital Output Total Number of Outputs DO Max. Contact Ratings DO Isolation Maximum Number of I/O Expansion Modules PROTOCOL SUPPORT MDLC MODBUS Master MODBUS Slave
-400 to +4000 meter (-1312 to + 13120 ft) Serial RS232/RS485 port (configurable)
- RS-232 up to 115.2 Kb/s
- RS485 up to 460.8 Kb/s USB ports:
- USB 2.0 On-the-Go
- USB 2.0 Host Ethernet port :
-10/100 Mb/s Optional plug-in ports with two RS232 ports:
- Up to 115.2 Kb/s 2 isolated (2500V) 3 DI Wet inputs Max 2.0 kHz (minimum pulse width 250 S) 30V DC
+6 to 30V DC 0 to +3V DC Max 8 mA@30V DC 2500 V 1 Magnetically Latched (ML) 2A@30VDC or 0.6A@30VAC 1500V 2 Serial/Ethernet/USB Serial/Ethernet Serial/Ethernet 64 Send Feedback Contact Us CONFIGURATION &
PROGRAMMING TOOLS ACE3600 STS CodeSys Programmer CProgramming SDK Configuration (Mixed System only) IEC61131-3 compliant application C Language API Time Synchronization NTP, MDLC Ext. GPS/GLONASS, NMEA-0183, 1PPS, RS232 HTTPS, SSL, SSH Security MC-EDGE Input Module Specifications The MC-EDGE input module (mixed DI/AI) specifications are listed below. Table A-2 MC-EDGE Input Module Specifications Attribute Total Number of Inputs Digital Inputs DI Fast Counter Input Mode Frequency Max. DC Input Voltage ON DC Voltage Range OFF DC Voltage Range Analog Input Input Current DI De-bouncing Filter Diagnostic LEDs User Connection DI Isolation to CPU Analog Inputs A/D resolution AI Accuracy AI Temperature Drift AI Smoothing AI Scaling Specifications 12 DI wet inputs 8 AI: 0-20 mA (4-20 mA), 0-5 VDC differential inputs Max 2.0 kHz (minimum pulse width 250 S) 30V DC
+6 to 30V DC 0 to +3V DC Max 8 mA@30V DC 10, 20, 30, 40, 50 msec Status LED per each input 2 Terminal Blocks, with maximum 12 AWG 2500 V 16 bit (including sign) 0.1% of full scale 25PPM/C User configurable User configurable (positive range only) Send Feedback 65 AI Fast sampling Impedance Physical Dimensions Weight User configurable: No filtering 10 samples /sec 60 Hz filtering 7.5 samples /sec 50 Hz filtering 6.25 samples /sec Voltage channels - range 0 -5 V, 200K input impedance or Current channels - range 0 -20 mA, 250 input impedance 7.6 cm (W) x 15.9 cm (H) x 11.8 cm (D) (3" x 6.3" x 4.7" ) (WxHxD) The depth of the unit including the front cover is 14.59 cm (5.74"). The depth to the tip of the grounding screw is 13.73 cm (5.41"). 0.82 Kg (1.64 Lb) MC-EDGE Output Module Specifications The MC-EDGE output (mixed DO/AO) module specifications are listed below. Table A-3 MC-EDGE Output Module Specifications Specifications 8 DO: 4 ML/4 EE Form C (SPDT) 2 AO: current (0-20 mA) or voltage (0-10 V) Max 10 Hz 2A@30VDC or 0.6A@30VAC 1500V 0-20 mA or 0-10 V DC voltage; no isolation between channels 12 bit 0.1% of full scale @ 25 C 0.5% of full scale @ all range 1mS Voltage: >1K Current: <1K Voltage output: short circuit current, max. 35mA Current output: No-load voltage max. 31V DC Attribute Total Number of Outputs Digital Outputs DO Frequency DO Max. Contact Ratings DO Isolation Analog Output Output Arrangement D to A Resolution AO Accuracy AO Temperature Stability AO Internal Settling Time AO Load Output Protection User Connection Isolation to CPU Physical Dimensions 2 Terminal Blocks, with maximum 12 AWG 1.5 kV between output and module logic 7.6 cm (W) x 15.9 cm (H) x 11.8 cm (D) (3" x 6.3" x 4.7" ) (WxHxD) The depth of the unit including the front cover is 14.59 cm (5.74"). The depth to the tip of the grounding screw is 13.73 cm (5.41"). approx. 0.5 Kg (1.64 Lb) Weight Power Consumption Output module: max 450 mA @12V/typical 250 mA @12V 66 Send Feedback Contact Us Send Feedback 67 MC-EDGE Mixed I/O Module Specifications Table A-4 MC-EDGE Output Module Specifications Attribute Total Number of Outputs Digital Outputs DO Frequency DO Max. Contact Ratings DO Isolation Analog Output Output Arrangement D to A Resolution AO Accuracy AO Temperature Stability AO Internal Settling Time AO Load Output Protection User Connection Isolation to CPU Total Number of Inputs Digital Inputs DI Fast Counter Input Mode Frequency Max. DC Input Voltage ON DC Voltage Range OFF DC Voltage Range Analog Input Input Current DI De-bouncing Filter Diagnostic LEDs User Connection DI Isolation to CPU Specifications 6 DO: 2 ML/4 EE Form C (SPDT) 1 AO: current (0-20 mA) or voltage (0-10 V) Max 10 Hz 2A@30VDC or 0.6A@30VAC 1500V 0-20 mA or 0-10 V DC voltage; no isolation between channels 12 bit 0.1% of full scale @ 25 C 0.5% of full scale @ all range 1mS Voltage: >1K Current: <1K Voltage output: short circuit current, max. 35mA Current output: No-load voltage max. 31V DC 2 Terminal Blocks, with maximum 12 AWG 1.5 kV between output and module logic 7 DI wet inputs 4 AI: 0-20 mA (4-20 mA) Max 2.0 kHz (minimum pulse width 250 S) 30V DC
+6 to 30V DC 0 to +3V DC Max 8 mA@30V DC 10, 20, 30, 40, 50 msec Status LED per each input 2 Terminal Blocks, with maximum 12 AWG 2500 V 68 Send Feedback Contact Us Analog Inputs A/D resolution AI Accuracy AI Temperature Drift AI Smoothing AI Scaling AI Fast sampling Impedance Physical Dimensions Weight Power Consumption all on Power Consumption Idle 16 bit (including sign) 0.1% of full scale 25PPM/C User configurable User configurable (positive range only) User configurable: No filtering 10 samples /sec 60 Hz filtering 7.5 samples /sec 50 Hz filtering 6.25 samples /sec Voltage channels - range 0 -5 V, 200K input impedance or Current channels - range 0 -20 mA, 250 input impedance 7.6 cm (W) x 15.9 cm (H) x 11.8 cm (D) (3" x 6.3" x 4.7" ) (WxHxD) The depth of the unit including the front cover is 14.59 cm (5.74"). The depth to the tip of the grounding screw is 13.73 cm (5.41"). approx. 0.5 Kg (1.64 Lb) 194.4mA@12V 64mA@12V MC-EDGE Regulatory Specifications The MC-EDGE regulatory specifications are listed below. Table A-6 MC-EDGE Regulatory Specifications Standard Safety Specification UL 60950-1 (UL listed) EN60950-1 Emission Housing Sealing CFR 47 FCC part 15, subpart B (class A) IP30 Send Feedback 69 Appendix B: Cables and Adaptors General This appendix provides the information required for connecting an MC-EDGE RTU and ACE1100 FEP to various interfaces, as detailed below:
1. Connection to a computer via RS232 2. Connection to a modem via RS232 3. Connection to a PLC/RTU/FEP via RS232 4. Connection to a PLC/RTU/FEP via RS485 5. Connection to a computer via Ethernet 6. Connection to a computer via USB 7. MC-EDGE CPU to MC-EDGE I/O Expansion Module Connection NOTICE: On the MC-EDGE RJ45 RS232 connector, the numbering of the pins is different than the ACE3600, as shown in Figure 61. Pin 8-1 are left to right. Therefore, only original Motorola MC-EDGE cables should be used. Figure 61 MC-EDGE RJ45 RS232 connector For information on connecting the MC-EDGE to a radio via USB or RS232, see MC-EDGE Radio Types and Installation Kits. Connection to a Computer via RS232 Use this connection to configure an MC-EDGE mixed system using the ACE3600 STS. To connect the units RS232 serial port to a computer, use the RS232 data cable
(FKN0022), which includes an RJ45-to-RJ45 cable (3008439S01) and an adaptor
(0189968V32) with a male 9-pin, D-type connector. Add a null modem cable
(female-to-female) which is not provided. See Figure 62. NOTICE: The FKN0022 adaptor is not the same adaptor that is used with the ACE3600. 70 Send Feedback Contact Us Figure 62. Computer-RS232 Connectivity The unit port is defined as an MDLC protocol port. The signals that appear on the male 9-pin D-type connector are according to the RS232 standard. See the following table. Table 15. RS232-Computer Connection Pin Out 8-pin Connector (on RTU) RS232 Adaptor
(0189968V32) 9-pin D-type Null Modem 9- pin Female (No flow control) 9-pin Male (on Computer/
Terminal) 7 (Rx) 8 (Tx) 4 (DCD) 1 (DTR) 2 (NC) 5 (GND) 6 (CTS) 3 (RTS) 2 3 1 4 NC (not connected) 5 8 7 NC 3 2 NC NC NC 5 NC NC NC 3 (Tx) 2 (Rx) 7 (RTS) 8 (CTS) 6 (DSR) 5 (GND) 4 (DTR) 1 (DCD) 9 (RI) Connection to a Modem via RS232 Use this connection to communicate from an MC-EDGE unit over a modem. To connect the units RS232 serial port to a modem, use the RS232 data cable
(FKN0022), which includes an RJ45-to-RJ45 cable (3008439S01) and an adaptor
(0189968V32) with a male 9-pin, D-type connector. See Figure 63. Send Feedback 71 Figure 63. RS232- Modem Connectivity The unit port is defined as an MDLC protocol port. The signals that appear on the male 9-pin D-type connector are according to the RS232 standard. See the following table. Figure 64. RS232-Modem Connection Pin Out 8-pin Connector (on RTU) RS232 Adaptor (0189968V32) 9-pin D-type 9-pin Female (on Modem) 7 (Rx) 8 (Tx) 4 (DCD) 1 (DTR) 2 (NC) 5 (GND) 6 (CTS) 3 (RTS) 2 3 1 4 NC 5 8 7 NC 2 (Rx) 3 (Tx) 1 (DCD) 4 (DTR) 6 (DSR) 5 (GND) 8 (CTS) 7 (RTS) 9 (RI) Connection to a PLC/RTU/FEP via RS232 To connect the units RS232 serial port to a PLC/RTU/FEP, connect an RS232 data cable
(FKN0022), which includes an RJ45-to-RJ45 cable (3008439S01) and an adaptor
(0189968V32) with a male 9-pin, D-type connector, to each unit. Add a null modem cable
(female-to-female), which is not provided, between the two data cables. See Figure 65. 72 Send Feedback Contact Us Figure 65. RS232-RTU/FEP Connectivity Figure 66. RS232-PLC Connectivity The unit port is defined as an MDLC protocol port. For RS232-RTU/FEP connectivity, the port is defined as RTU-to-RTU with no flow control. Both null modem cables are supported, with or without flow control, because the FEP or RTU ignore these signals. The signals that appear on the male 9-pin D-type connector are according to the RS232 standard. See the following tables. Table 16. RS232-PLC/RTU/FEP Connection Pin Out without Flow Control 8- pin Connector
(on RTU) 7 (Rx) 8 (Tx) 4 (DCD) 1 (DTR) 2 (NC) 5 (GND) 6 (CTS) 3 (RTS) RS232 Adaptor
(0189968V32) 9-pin D-type 2 3 1 4 NC 5 8 7 Send Feedback Null Modem 9-pin Female
(No Flow Control) 3 2 NC NC NC 5 NC NC RS232 Adaptor
(0189968V32) 9-pin D-type 3 2 1 4 NC 5 8 7 8-pin Connector (on RTU/FEP) 8 (Tx) 7 (Rx) 4 (DCD) 1 (DTR) 2 (NC) 5 (GND) 6 (CTS) 3 (RTS) 73 Table 17. RS232-PLC/RTU/FEP Connection Pin Out with Partial Flow Control NC NC NC 8- pin Connector
(on RTU) 7 (Rx) 8 (Tx) 4 (DCD) 1 (DTR) 2 (NC) 5 (GND) 6 (CTS) 3 (RTS) RS232 Adaptor
(0189968V32) 9-pin D-type 2 3 1 4 NC 5 8 7 NC Null Modem 9-pin Female
(with Partial Flow Control) 3 2 NC NC NC 5 7 8 NC RS232 Adaptor
(0189968V32) 9-pin D-type 3 2 1 4 NC 5 7 8 NC 8-pin Connector
(on RTU/FEP) 8 (Tx) 7 (Rx) 4 (DCD) 1 (DTR) 2 (NC) 5 (GND) 3 (RTS) 6 (CTS) Connection to a PLC/RTU/FEP via RS485 To connect the units RS485 serial port to a PLC/RTU/FEP, use the RS485 adaptor cable (FKN0030A) which ends with a female 9-pin, D-type connector. Table 18. RS485- PLC/RTU/FEP Connectivity The unit port is defined as an MDLC protocol port. The signals that appear on the female 9-pin D-type connector are according to the RS485 standard with internal 120 resistance. See the following table. Table 19. RS485-PLC/RTU/FEP Connection Pin Out 8-pin Connector (on RTU) 1 (Tx/RX+) 2 (NC) 3 (NC) 4 (NC) 5 (GND) 6 (NC) 9-pin Female on Adaptor Cable (CB000207A01) 3 (Tx/RX+) 1 (NC) 2 (NC) 4 (NC) 5 (GND) 6 (NC) 74 Send Feedback Contact Us 7 (NC) 8 (Tx/RX-) 8 (NC) 7 (Tx/RX-) Connection to a Computer (Ethernet) Use this connection to configure an MC-EDGE mixed system using the ACE3600 STS or to configure an MC-EDGE system using the MC-EDGE Easy Configurator. To connect the RTU LAN port to a computer via Ethernet, use a standard Ethernet cable. In the Google Chrome web browser, on your computer, enter the allocated IP address of the TCP/IP port of the RTU/FEP. If the PC/laptop does not have an appropriate local area connection for accessing the unit, do the following:
1. 2. In Control Panel -> Network and Internet -> Network Connections, select a TCP/IP connection and click Properties. If your PC/laptop is connected to the USB OTG port, click Use the following IP address and enter https://192.168.9.10. This is the address allocated to a PC/laptop communicating with the USB OTG part. 3. To use a dynamically allocated IP address, click Obtain an IP address automatically. If you are prompted that the sites security certificate is not trusted, click Proceed anyway. 4. Connection to a Computer (USB OTG) Use this connection to configure an MC-EDGE mixed system using the ACE3600 STS or to configure an MC-EDGE system using the MC-EDGE Easy Configurator. To connect the RTU USB OTG (as device) port to a computer, use a USB 2.0 cable with a Micro-B connector. In the Google Chrome web browser on your computer, enter the IP address of the USB OTG port of the RTU/FEP, https://192.168.9.9. 5. 6. In Control Panel -> Network and Internet -> Network Connections, select a TCP/IP connection and click Properties. If your PC/laptop is connected to the USB OTG port, click Use the following IP address and enter https://192.168.9.10. This is the address allocated to a PC/laptop communicating with the USB OTG part. 7. To use a dynamically allocated IP address, click Obtain an IP address automatically. If you are prompted that the sites security certificate is not trusted, click Proceed anyway. 8. MC-EDGE CPU to MC-EDGE I/O Expansion Module Connection To connect the MC-EDGE CPU to an MC-EDGE I/O expansion module, or to connect one MC-EDGE I/O expansion module to another MC-EDGE I/O expansion module, use the 26 AWG RJ50 cable (#30013144001.) Send Feedback 75 Table 20. B-6 MC-EDGE CPU to MC-EDGE I/O Expansion Module Connectivity Table 21. CPU-Expansion Module Connection Pin Out Function GND GND GND CAN "-"
CAN "+"
CONFIG RSV PWR PWR PWR RJ50 Connector 1 RJ50 Connector 2 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 76 Send Feedback Contact Us Appendix C: MC-EDGE I/O References Input /Mixed IO Module Block Diagram Figure 67. 12 DI/8 AI Input module 7 DI/4 AI Mixed IO module Send Feedback 77 Digital Output Circuit Diagrams Figure 68. Digital Output Circuit Diagrams Analog Output Circuit Diagram Figure 69. Analog Output Circuit Diagram 78 AI 5 V - Typical Input Circuit Send Feedback Contact Us Output Module Block Diagram Send Feedback 79 Figure 70. Output Module Block Diagram 80 Send Feedback Contact Us Digital Output Circuit Diagrams Figure 71. Digital Output Circuit Diagrams Analog Output Circuit Diagram Figure 72. Analog Output Circuit Diagram Send Feedback 81 I/O Connection Charts I/O Expansion Inputs I/O Expansion Outputs Function Pin Pin Connector P3 1 2 3 4 5 6 7 8 9 10 11 DI1 12 COM1-2 13 DI2 14 DI3 15 COM3-4 16 DI4 17 DI5 18 COM5-6 DI6 19 PGNDDI 20 Function DI7 COM7-8 DI8 DI9 COM9-10 DI10 DI11 COM11-12 DI12 PGNDDI Connector P4 11 12 13 14 15 16 17 18 19 20 AI1+
AI1-
AI2+
AI2-
AI3+
AI3-
AI4+
AI4-
PGNDAI PGNDAI 31 32 33 34 35 36 37 38 39 40 AI5+
AI5-
AI6+
AI6-
AI7+
AI7-
AI8+
AI8-
NC NC 82 Function Pin Connector P3 1 2 3 4 5 6 7 8 9 10 NC1 COM1 NO1 NC2 COM2 NO2 NC3 COM3 NO3 PGNDDO PGNDDO Connector P4 11 NC4 12 COM4 13 NO4 14 15 NC 16 PGNDAO AOv1+
17 18 AO1-
19 AOi1+
20 NC Pin Function 11 R5-r NC 12 COM5 13 R5-s NO 14 R6-r NC 15 COM6 16 R6-s NO 17 R7-r NC 18 COM7 19 R7-s NO 30 PGNDDO 31 R8-r NC 32 COM8 33 R8-s 34 PGNDDO 35 NC 36 PGNDAO 37 AOv2+
38 AO2-
39 AOi2+
40 NC Send Feedback Contact Us I/O Expansion Mixed IO Function Pin Pin Connector P3 1 2 3 4 5 6 7 8 9 10 11 R1-r 12 COM1 13 R1-s 14 NO2 15 COM2 16 NO3 COM3 17 PGNDDO 18 19 AI1+
AI1-
20 Function R4-r COM4 R4-s NO5 COM5 NO6 COM6 PGNDAI AI3+
AI3-
AI2+
AI2-
VDRY Connector P4 11 12 13 14 COMDRY 34 35 15 DI1 36 16 DI2 17 DI3 37 38 18 NC 39 19 20 40 31 AI4+
32 AI4-
33 DI4 DI5 DI6 COMDI DI7 PDNDDI AOI+
PGNDAO AOV+
AO-
Send Feedback 83 Appendix D: MC-EDGE External Connector Pin Outs MC-EDGE CPU LAN Port Connector The table below lists the pin out for the LAN (ETH1) port connector on the MC-EDGE CPU module. Table 22. out for the LAN (ETH1) port connector on the MC-EDGE CPU module Pin 1 2 3 4 5 6 7 8 Direction Description Max Voltage Operational Current OUT OUT IN NC NC IN NC NC TX +
TX -
RX +
NC NC RX-
NC NC 100Base-T: 1.05V differential 10Base-T:
2.8V differential 100Base-T: 10mA 10Base-T: 30mA NA NA NA NA MC-EDGE CPU RS232 Port Connector The table below lists the pin out for the RS232 port connector on the MC-EDGE CPU module. NOTICE: On the MC-EDGE RS232 port connector, the numbering of the pins is the opposite of that of the ACE3600 RS232 port connector. Table 23. Pin out for the RS232 port connector on the MC-EDGE CPU module Pin 1 2 3 4 5 6 7 8 84 Direction Description Max Voltage Operational Current OUT IN IN GND IN OUT NC OUT TX RX CTS GND CD RTS NC DTR/RS485 5.4V 12V 12V 12V 5.4V 5.4V 2mA 4mA 4mA 4mA 2mA 2mA Send Feedback Contact Us MC-EDGE CPU RS485 Port Connector The table below lists the pin out for the RS485 port connector on the MC-EDGE CPU module. Table 24. Pin out for the RS485 port connector on the MC-EDGE CPU module Pin 1 2 3 4 5 6 7 8 Direction Description OUT NC NC NC NC NC NC OUT TX+
NC NC NC NC NC NC TX-
MC-EDGE CPU I/O Connector Max Voltage 2V differential Operational Current 30mA (on 60ohm resistor) 2V differential 30mA The table below lists the pin out for the I/O connector on the MC-EDGE CPU module. Table 25. pin out for the I/O connector on the MC-EDGE CPU module Direction Description Max Voltage Max Current 2A @ 30VDC 0.6A @ 60VDC 0.6A @ 30VAC 11mA 11mA 11mA 11mA Pin 1 2 3 4 5 6 7 8 I/O I/O I/O PGNDDI IN IN IN IN R1-S COM1 R1-S PGNDi COM-DI DI 1 DI 2 DI 3 MC-EDGE CPU RJ50 Connector 30VDC 60VDC 30VAC
-/+30VDC
-/+30VDC
-/+30VDC
-/+30VDC Send Feedback 85 The table below lists the pin out for the RJ50 connector on the MC-EDGE CPU module. Table 29. Pin out for the RJ50 connector on the MC-EDGE CPU module Pin 1 2 3 4, 5 6 7 8 9 10 Direction Description Max Voltage Operational Current GND GND GND I/O OUT NC PWR PWR PWR GND GND GND CANH, CANL 3V differential Config NC PWR PWR PWR 3.6V 30V 30V 30V 50mA 0.33mA 1A @12V
(2 I/O expansion) MC-EDGE Input Module RJ50 Connector Figure 73. MC-EDGE Input Module RJ50 Connector The table below lists the pin out for the P1 RJ50 Power/CAN connector on the right side of the MC-EDGE Input module. Table 30. Pin out for the P1 RJ50 Power/CAN connector on the right side of the MC-EDGE Input module Pin 1 2 3 4 5 6 7 86 Direction Description Max Voltage Max Current GND GND GND Bidirectiona l Bidirectiona l OUT/Ope n Drain NC Vin Ret Vin Ret Vin Ret CANL CANH Config Out NC 30V 30V 30V 5V 5V 5V 1.5A 1.5A 1.5A NA NA NA Send Feedback Contact Us 8 9 10 Supply Supply Supply Vin Vin Vin 30V 30V 30V 1.5A 1.5A 1.5A The table below lists the pin out for the P2 RJ50 Power/CAN connector on the left side of the MC-EDGE Input module. Table 31. Pin out for the P2 RJ50 Power/CAN connector on the left side of the MC-EDGE Input module Pin 1 2 3 4 5 6 7 8 9 10 Direction Description Max Voltage Max Current GND GND GND Bidirectiona l Bidirectiona l IN NC Supply Supply Supply Vin Ret Vin Ret Vin Ret CANL CANH Config In NC Vin Vin Vin 30V 30V 30V 5V 5V 5V 30V 30V 30V 1.5A 1.5A 1.5A NA NA NA 1.5A 1.5A 1.5A MC-EDGE Input Module DI Connector The table below lists the pin out for the P3 TB Digital Input connector on the MC-EDGE Input module. Table 32. pin out for the P3 TB Digital Input connector on the MC-EDGE Input module Pin 1 2 3 4 5 6 7 8 9 10 Direction Description Max Voltage Max Current IN IN IN IN IN IN IN IN IN PGNDDI DI1_1 DI1_2/DI2_2 DI2_1 DI3_1 DI3_2/DI4_2 DI4_1 DI5_1 DI5_2/DI6_2 DI6_1 PGND1 30V 30V 30V 30V 30V 30V 30V 30V 30V N/A 11mA 11mA 11mA 11mA 11mA 11mA 11mA 11mA 11mA N/A Send Feedback 87 21 22 23 24 25 26 27 28 29 30 IN IN IN IN IN IN IN IN IN PGNDDI DI7_1 DI7_2/DI8_2 DI8_1 DI9_1 DI9_2/DI10_2 DI0_1 DI11_1 DI11_2/DI12_2 DI12_1 PGND1 30V 30V 30V 30V 30V 30V 30V 30V 30V N/A 11mA 11mA 11mA 11mA 11mA 11mA 11mA 11mA 11mA N/A MC-EDGE Input Module AI Connector The table below lists the pin out for the P4 TB Analog Input connector on the MC-EDGE Input module. Table 33. pin out for the P4 TB Analog Input connector on the MC-EDGE Input module Pin 11 12 13 14 15 16 17 18 19 20 31 32 33 34 35 36 37 38 39 88 Direction Description Max Voltage Max Current IN IN IN IN IN IN IN IN PGNDAI PGNDAI IN IN IN IN IN IN IN IN NC AN1_1 AN1_2 AN2_1 AN2_2 AN3_1 AN3_2 AN4_1 AN4_2 PGND2 PGND2 AN5_1 AN5_2 AN6_1 AN6_2 AN7_1 AN7_2 AN8_1 AN8_2 NC 7V 7V 7V 7V 7V 7V 7V 7V N/A N/A 7V 7V 7V 7V 7V 7V 7V 7V 30mA 30mA 30mA 30mA 30mA 30mA 30mA 30mA N/A N/A 30mA 30mA 30mA 30mA 30mA 30mA 30mA 30mA Send Feedback Pin 1 2 3 4 5 6 7 8 9 10 GND GND GND I/O I/O OUT NC PWR PWR PWR Contact Us 40 NC NC MC-EDGE Output Module RJ50 Connector The table below lists the pin out for the P1 RJ50 Power/CAN connector on the right side of the MC-EDGE Output module. Table 34. Pin out for the P1 RJ50 Power/CAN connector on the right side of the MC-EDGE Output module Direction Description Max Voltage Max Current GND GND GND CAN+
CAN-
Config 3.3V 3.3V 3.6V 1.7A 1.7A 1.7A NA NA NA NC PWR PWR PWR 1.7A 1.7A 1.7A The table below lists the pin out for the P2 RJ50 Power/CAN connector on the left side of the MC-EDGE Output module. 30V 30V 30V Table 35. Pin out for the P2 RJ50 Power/CAN connector on the left side of the MC-EDGE Output module Pin 1 2 3 4 5 6 7 8 Direction Description Max Voltage Max Current GND GND GND I/O I/O IN NC PWR GND GND GND CANL CANH Config NC PWR 3.3V 3.3V 3.6V 30V 1.7A 1.7A 1.7A N/A N/A N/A 1.7A Send Feedback 89 9 10 PWR PWR PWR PWR 30V 30V 1.7A 1.7A MC-EDGE Output Module DO Connector The table below lists the pin out for the P3 TB Digital Output connector on the MC-EDGE Output module. Table 36. Pin out for the P3 TB Digital Output connector on the MC-EDGE Output module Direction Description Max Voltage Max Current I/O I/O I/O I/O I/O I/O I/O I/O I/O NC1 COM1 NO1 NC2 COM2 NO2 NC3 COM3 NO3 30VDC 60VDC 30VAC 2A @ 30VDC 0.6A @ 60VDC 0.6A @ 30VAC PGNDDO PGNDDO N/A N/A I/O I/O I/O I/O I/O I/O I/O I/O I/O R5-R COM5 R5-S R6-R COM6 R6-S R7-R COM7 R7-S 30VDC 60VDC 30VAC 2A @ 30VDC 0.6A @ 60VDC 0.6A @ 30VAC PGNDDO PGNDDO N/A N/A Pin 1 2 3 4 5 6 7 8 9 10 21 22 23 24 25 26 27 28 29 30 MC-EDGE Output Module DO/AO Connector The table below lists the pin out for the P4 TB Digital Output/Analog Output connector on the MC-EDGE Output module. Table 37. Pin out for the P4 TB Digital Output/Analog Output connector on the MC-EDGE Output module Pin Direction Description Max Voltage Max Current 90 Send Feedback Contact Us 11 12 13 14 15 16 17 18 19 20 31 32 33 34 35 36 37 38 39 40 I/O I/O I/O NC4 COM4 NO4 PGNDDO PGNDDO NC PGNDAO OUT OUT OUT NC I/O I/O I/O NC PGNDAO AO1V+
AORet AO1I+
NC R8-R COM8 R8-S PGNDDO PGNDDO NC PGNDAO OUT OUT OUT NC NC PGNDAO AO2V+
AORet AO2I+
NC 30VDC 60VDC 30VAC N/A N/A 11V 0 30V 30VDC 60VDC 30VAC N/A N/A 11V 0 30V 2A @ 30VDC 0.6A @ 60VDC 0.6A @ 30VAC N/A N/A 45mA 45mA 25Ma 2A @ 30VDC 0.6A @ 60VDC 0.6A @ 30VAC N/A N/A 45mA 45mA 25mA MC-EDGE Mixed Module Connector The table below lists the pin out for the MC-EDGE Mixed Module Connector Table 38. Pin out for the MC-EDGE Mixed Module Connector Pin 1 2 3 4 5 6 7 8 9 Direction Description Max Voltage Max Current I/O I/O I/O I/O I/O I/O I/O I/O IN R1-r COM1 R1-s NO2 COM2 NO3 COM3 PGNDDO AI1+
30VDC 60VDC 30VAC 2A @ 30VDC 0.6A @ 60VDC 0.6A @ 30VAC 7V 30mA Send Feedback 91 10 21 22 23 24 25 26 27 28 29 30 11 12 13 14 15 16 17 18 19 20 31 32 33 34 35 36 37 38 39 40 IN I/O I/O I/O I/O I/O I/O I/O PGNDAI IN IN IN IN O O IN IN IN NC OUT OUT IN IN IN IN IN IN IN AI1-
R4-r COM4 R4-r NO5 COM5 NO6 COM6 PGNDAI AI3+
AI3+
AI2+
AI2+
VDRY COMDRY DI1 DI2 DI3 AOV+
AO-
AI4+
AI4+
DI4 DI5 DI6 COMDI DI7 PDNDDI OUT PDNDDI AOI+
PGNDAO PGNDAO 92 7V 30mA 30VDC 60VDC 30VAC 2A @ 30VDC 0.6A @ 60VDC 0.6A @ 30VAC N/A 7V 7V 7V 7V NA NA 30V 30V 30V 11V 0 7V 7V 30V 30V 30V 30V 30V NA 30V NA N/A 30mA 30mA 30mA 30mA NA NA 11mA 11mA 11mA 45mA 45mA 30mA 30mA 11mA 11mA 11mA 11mA 11mA NA 25mA NA Send Feedback Contact Us Send Feedback 93 Appendix E: MC-EDGE Field Replacement Units MC-EDGE Field Replacement Units and Parts The table below lists the accessories and field replacement units for the MC-EDGE RTU model (F0016A) and ACE1100 FEP/IRM1100 (F0043A). Table 39. MC-EDGE Field Replacement Units and Parts Kit #
FKN0022 FKN0024A FKN0027 FKN0030 FKN0033 FKN0034 FLN0050A FLN0051A FLN0052A FLN0116A FHN0054A FHN0056A FHN0057A FHN0058A FHN0059A FHN0060A FHN0061A FHN0062A FHN0063A FHN0064A FHN0065 FLN0100A Name RS-232 DATA CABLE TERMINAL BLOCK CONNECTOR EXTRACTOR MTM5200 DATA CABLE RS-485 PORT 120 OHM TERMINATION CABLE DC POWER CABLE GROUND CABLE 12DI/8AI MODULE 0-20MA 12DI/8AI MODULE 0-5V 8DO/2AO MODULE 0-20MA, 0-10V 7DI/6DO/4AI/1AO MODULE 0-20mA DIN RAIL 26 CM DIN RAIL 42 CM DIN RAIL STOPPER CPU CABLE COVER I/O MODULE CABLE COVER SD COVER TERMINAL BLOCK MALE 10 PIN 5MM TERMINAL BLOCK MALE 3 PIN 5 MM TERMINAL BLOCK MALE 2 PIN 5 MM TERMINAL BLOCK MALE 4 PIN 3.5MM RJ50 I/O MODULE CABLE APX 6500 INSTALLATION KIT 94 Send Feedback
1 | RF Safety Manual | Users Manual | 76.66 KiB |
RF Energy Exposure Training and Product Safety Information for Fixed Radio Transmitters July 2018 2018 Motorola Solutions, Inc. All rights reserved 6802988C84 6802988C84-B Motorola Solutions English Caution Before using this radio transmitter, read this booklet which contains important operating instructions. Compliance with RF Exposure Standards National and international regulations require compliance with the RF energy exposure limits for fixed radio transmitters before they can be operated. Your Motorola radio transmitter is designed, manufactured and tested to comply with all applicable national and international regulations for human exposure to radio frequency electromagnetic energy. RF Energy Exposure Awareness and Control Information and Operational Instructions Notice: This radio transmitter is intended for use in occupational/
controlled conditions, where users are aware of their exposure and can exercise control over their exposure to meet the requirements in national and international regulations. This radio device is also authorized for general population, consumer use. Operating Instructions Table 1 lists the recommended lateral distance from properly installed antenna(s). Table 1: Recommended Minimum Lateral Distance from Antenna(s) People (bystander) General Public Trained Personnel Minimum Lateral Distance 43.3 inches (110 centimeters) 43.3 inches (110 centimeters) Notice: Trained personnel should be aware of the radio-frequency energy exposure, and should be able to control it, for instance by increasing the distance from the antenna(s). Fixed Radio Transmitter Antenna Installation Guidelines Make sure to follow the antenna installation guidelines that are provided in this radio transmitter installation manual. Use only Motorola Solutions approved supplied antennas or a Motorola Solutions approved replacement antenna. Unauthorized antennas, modifications, or 1 English attachments could damage the radio and may result in non-compliance with RF safety standards. Guidelines and Operating Instructions for Radio Transmitters Installed as Fixed Site Control Stations The antenna installation must comply with the following requirements in order to ensure optimal performance and compliance with applicable RF exposure limits. The antenna should be mounted outside the building on the roof or a tower if at all possible. It is the responsibility of the licensee to manage the site in accordance with applicable regulatory requirements. Actions such as site survey measurements, signage, and site access restrictions may be required in order to ensure compliance with RF exposure limits. Operational Warnings The following explains the operational warnings:
Potentially Explosive Atmospheres Warning:
Use of a radio transmitter that is not intrinsically safe in a potentially explosive atmosphere could result in a serious injury or death. You should only use a certified Intrinsically Safe radio transmitter in potentially explosive atmospheres. Explosive atmospheres refer to hazard classified locations that may contain hazardous gas, vapors, dusts, such as fueling areas below decks on boats, fuel or chemical transferor storage facilities, and areas where the air contains chemicals or particles such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted. Make sure your radio transmitter is turned off prior to entering any area with a potentially explosive atmosphere unless it is a transmitter type specifically certified for use in hazardous location areas. DO NOT remove, install, or charge batteries in such areas, or remove or install antennas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. Batteries If your radio transmitter is equipped with a primary or backup battery you must follow these instructions:
Charge your battery using the approved Motorola Solutions charger. 2 English Use the battery in accordance with its water and/or dust Ingress Protection (IP) rating. Do not discard your battery into a fire. Do not replace the battery in any area labeled "Hazardous Atmosphere". Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery. Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven. Do not allow conductive material such as jewelry, keys, or beaded chains to touch exposed battery terminals. European Union(EU) Waste of Electrical and Electronic Equipment
(WEEE) Directive The European Union's WEEE directive requires that products sold into EU countries must have the crossed out trash bin label on the product (or the package in some cases). As defined by the WEEE directive, this cross-out trash bin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection system in their country. 3
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-08-30 | 136 ~ 174 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2018-08-30
|
||||
1 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0003778479
|
||||
1 | Physical Address |
8000 West Sunrise Blvd
|
||||
1 |
Ft Lauderdale, Florida 33322
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
j******@tuvsud.com
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AZ4
|
||||
1 | Equipment Product Code |
92FT7112
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
D**** Z******
|
||||
1 | Title |
Regulatory Compliance Manager
|
||||
1 | Telephone Number |
95472********
|
||||
1 | Fax Number |
--********
|
||||
1 |
d******@motorolasolutions.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | MC-EDGE VHF, Edge Sensor Gateway | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Output power listed is rated conducted; maximum conducted output power as allowed by 47 CFR 90.205(s) is 5.9 W. The transmitter must be installed to provide a separation distance of at least 103 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Co-located with FCC ID: N7NHL7588 and FCC ID: SQG-1001. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
ITL PRODUCT TESTING LTD
|
||||
1 | Name |
I******** C******
|
||||
1 | Telephone Number |
972-8********
|
||||
1 | Fax Number |
+972 ********
|
||||
1 |
i******@itl.co.il
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22,74,9 | EF ES | 136 | 174 | 5.5 | 2 ppm | 8K10F1D | |||||||||||||||||||||||||||||||||
1 | 2 | 22,74,9 | EF ES | 136 | 174 | 5.5 | 2 ppm | 8K10F1W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC