all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Exhibit D Users Manual per 2 1033 c3 | Users Manual | 563.94 KiB | November 12 2002 | |||
1 |
|
RF Safety Manual | Users Manual | 81.28 KiB | November 12 2002 | |||
1 | Cover Letter(s) | / November 12 2002 | ||||||
1 |
|
Certification of Data | Attestation Statements | 5.22 KiB | November 12 2002 | |||
1 | Cover Letter(s) | November 12 2002 | ||||||
1 | ID Label/Location Info | November 12 2002 | ||||||
1 | External Photos | November 12 2002 | ||||||
1 | Internal Photos | November 12 2002 | ||||||
1 |
|
Exhibit E Test Measurement Report per 2 1033 c14 | Test Report | 547.51 KiB | November 12 2002 | |||
1 | RF Exposure Info | November 12 2002 | ||||||
1 | Parts List/Tune Up Info | November 12 2002 | ||||||
1 | RF Exposure Info | / November 12 2002 | ||||||
1 | Cover Letter(s) | / November 12 2002 |
1 | Exhibit D Users Manual per 2 1033 c3 | Users Manual | 563.94 KiB | November 12 2002 |
C O N T E N T S CONTENTS Computer Software Copyrights . ii Safety . 1 Product Safety and RF Exposure Compliance . 1 Radio Overview . 3 Parts of the Radio . 3 Optional Enhanced Keypad Microphone
(RMN4026) . 4 On/Off/Volume Knob . 5 Channel Selector Buttons . 5 LED Indicators . 5 Programmable Buttons . 5 Push-to-Talk (PTT) Button . 8 Microphone . 8 Use with Enhanced Keypad Microphone
(RMN4026) . 8 LCD Screen . 8 Audio Indicators for Programmable Buttons 10 Getting Started . 11 Turning the Radio On or Off . 11 Adjusting the Volume . 11 Selecting a Zone . 12 Selecting a Radio Channel . 12 Sending a Call . 13 Receiving a Call . 13 Radio Calls . 15 Making a Selective Call . 15 Receiving a Selective Call F. 16 Sending a Call Alert Page. 16 Receiving a Call Alert Page . 17 Radio Check . 19 responding to emergency alerts E . 21 Decoding an Emergency Alarm. 21 Multiple Queued Emergencies . 22 Three Minute Timer . 22 After the Timer Expires . 22 Clearing an Emergency Alert E . 23 Sending an Emergency Remote Monitor . 23 Sending an Emergency Alert E . 24 Selective Radio Inhibit . 24 Repeater or Talkaround J Mode. 24 Setting the Power Level B . 25 Name and Call Tone Tagging. 26 Scan . 29 Starting or Stopping Scan G. 29 Talkback . 30 Deleting a Nuisance Channel . 30 i English S T N E T N O C Restoring a Channel to the Scan List . 30 Editing a Scan List . 30 Adding or Deleting Channels in a Scan List 31 Prioritizing a Channel in a Scan List . 32 Setting Priority Channels . 32 Phone. 35 Making a Phone Call D . 35 Audio/Tone Settings. 37 Utilities. 39 Selecting the Display Language . 40 Warranty . 41 Limited Warranty. 41 Accessories . 45 Audio . 45 Mounting . 45 Antennas . 46 Control Station . 46 COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. English ii SAFETY PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE
C a u t i o n Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio to ensure compliance with RF energy exposure limits. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/cgiss/
index.shtml. S A F E T Y 1 English Notes Y T E F A S English 2 RADIO OVERVIEW PARTS OF THE RADIO Red/Yellow/Green LED Indicators LCD Screen Channel Selector
(Up/Down) On/Off/Volume Knob Programmable Button 3 (P3)
(Interchangeable) Microphone
-DFN Programmable Button 1 (P1)
(Interchangeable) Programmable Button 2 (P2)
(Interchangeable) Programmable Button 4 (P4)
(Interchangeable) MAEPF-26782-O I R A D O O V E R V E W I 3 English Optional Enhanced Keypad Microphone
(RMN4026) Your radio may be ordered with an optional DTMF (Dual-Tone Multi-Frequency) microphone that has a direct entry keypad. This enhanced keypad microphone has three buttons (A, B, C) below the keypad that can be programmed to conveniently activate select radio features. By purchasing this enhanced keypad microphone, you will be able to gain access to menu capabilities and the radios user-
selectable features. Push-to-Talk
(PTT) button Keypad Programmable Buttons
(A, B, C) I W E V R E V O O D A R I English 4 FL0830328O On/Off/Volume Knob Turns the radio on or off, and adjusts the radios volume. Channel Selector Buttons y or z Used for channel scrolling. LED Indicators Indicates channel, scan, and monitor status, as well as receipt of a selective call. Programmable Buttons Your radio has several programmable buttons. Your dealer can program these buttons as shortcuts to various radio features. Check with your dealer for a complete list of functions your radio supports. Programmable buttons include the g, h, i, and j buttons (see page 3). Some buttons can access up to two features, depending on the type of button press:
short pressquickly pressing and releasing the programmable buttons long presspressing and holding the programmable buttons for a period of time
(default 1 1/2 seconds or programmed value)
hold downpressing and holding down the programmable buttons while checking status or making adjustments A summary of programmable radio features and corresponding page references appears beginning on page 6. In the Button column, have your dealer record the name of the programmable button next to the feature that has been programmed to it. The dealer can use the abbreviations (P1, P2, P3, P4) shown in the radio illustration on page 3. Also, where appropriate, have your dealer indicate whether the button press requires a short press, a long press, or needs to be held 5 I R A D O O V E R V E W I English
down. Function Indicator Short Press Long Press Hold Down Page Button Volume Set Home Revert Direct Zone Access Direct Channel Access PRTT (Priority Request-to-Talk) Takes you directly to a preprogrammed zone/channel combination. Direct entry to zone selection menu. Direct entry to channel selection.
(Enhanced keypad microphone required.) Sends a priority access request to the dispatcher. Emergency E Initiate Emergency Alert. Cancel Emergency status. Repeater/
Talkaround Power Level J B Toggle between using a repeater or transmitting directly to another radio. Toggle transmit power level between High and Low. Scan/Nuisance Channel Delete G Toggle scan on and off. Phone D Access Phone Mode. Delete a nuisance channel while scanning. Sound a tone for adjusting your radios volume level. 11 12 12 13 13 21 24 25 29 35 I W E V R E V O O D A R I English 6 Function Indicator Short Press Long Press Hold Down Page Button This function is activated by EITHER a short OR a long press, but not both. Speed Dial Access your phone list directly. C N Monitor Option Board
(if one is installed) Radio Call Light Auxiliary Control (1/2) Menu/Enter Exit Up/Down Horn and Lights Toggle silent monitor operation (also turn off open squelch monitor when it has been activated). Turn on open squelch monitor. Toggle between activating and deactivating the option board. Access the radio call menu. Adjust brightness level (off/low/med/high). Activate or deactivate a pin on the accessory connector. (See your dealer.) Enter the menu or confirm selection. Step one level back in the menu. Exit the menu. Step through menu choices. Toggle external alarm feature or cancels a triggered alarm. This function is activated by EITHER a short OR a long press, but not both. 36 I R A D O O V E R V E W I 7 English Push-to-Talk (PTT) Button Press and hold down this button to talk;
release it to listen. Microphone Hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it. Use with Enhanced Keypad Microphone
(RMN4026) A B C These keys are used to:
Dial a phone number
Make a radio call
Directly access preprogrammed features LCD Screen The top screen row displays radio status information:
Symbol A Companding B Power Level C Carrier Squelch
(CSQ) D Phone Indication The Companding feature is activated. When in narrow band, this feature improves audio quality. Low Power R or High Power S is activated. The radio is on a CSQ channel, monitor is active, or the microphone is off-hook. Phone Mode is selected. I W E V R E V O O D A R I English 8 Symbol M Signal Strength N Option Board Q L Indication Indicates signal strength. The more bars, the stronger the signal. Option board is enabled. Not currently assigned. Not currently assigned. Symbol Indication E Emergency F Call Received G Scan Priority 1 Scan
flashing) H Priority 2 Scan
steady) J Talkaround K Programming Mode An Emergency Alert is being sent. A Selective Call or Call Alert has been received. The Scan feature is active. During Scan, indicates that the scan has locked on to a priority 1 channel. During Scan, indicates that the scan has locked on to a priority 2 channel. The radio is not transmitting through a repeater. The radio is in Program List editing mode. I R A D O O V E R V E W I 9 English AUDIO INDICATORS FOR PROGRAMMABLE BUTTONS Low-High Tone High-Low Tone In addition to having associated visual indicators, some programmable buttons use tones to indicate one of two modes:
Button Low-High Tone High-Low Tone Scan Start scan Stop scan Power Level High power selected Low power selected Option Board Enabled Disabled Repeater/
Talkaround Does not use repeater Uses repeater I W E V R E V O O D A R I English 10 I G E T T N G S T A R T E D ADJUSTING THE VOLUME Turn the On/Off/Volume Control knob clockwise to increase the volume, or counterclockwise to decrease the volume. or 1 Hold down the Volume Set button (see page 6). You will hear a continuous tone. 2 Turn the On/Off/Volume Control knob to the desired volume level. 3 Release the Volume Set button. GETTING STARTED TURNING THE RADIO ON OR OFF OFF Push the On/Off/
Volume Control knob until you hear a click and the display clears. ON Push the On/Off/
Volume Control knob until you hear a click. If power-up is successful, you will hear the Self-Test Pass Tone (if programmed)
. If the radio fails to power up, you will hear the Self-Test Fail Tone
. 11 English D E T R A T S G N T T E G I SELECTING A ZONE A zone is a group of up to 16 channels. Before you can access a channel in a zone, you must select the zone in one of two ways:
Method 1 (if programmed by your dealer [see pages 6 - 7]) 1 Press the Direct Zone Access button. 2 y or z until you reach the desired zone. 3 Press the Direct Zone Access button to select the zone. Method 2 (enhanced keypad microphone required) 1 Press the Menu/Enter button to enter Menu Mode. 2 y or z until Zone 3 Press the Menu/
Enter button to select Zone 4 y or z until you see the desired zone name. 5 Press the Menu/Enter button to select the zone. SELECTING A RADIO CHANNEL Your radio offers 64 channels (4 zones of 16 channels each). Note: Due to government regulations, some channels may not be programmed. See your dealer for more information. There are three ways to select a channel:
Method 1 1 Select the appropriate Zone, if required. 2 y or z until you reach the desired channel, shown on the LCD display. Method 2 (if programmed by your dealer [see pages 6 - 7]) Press the Home Revert button. English 12 I G E T T N G S T A R T E D 3 Press the PTT (for priority requests to talk, the PRTT) button and wait for the talk permit tone. 4 Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the PTT to talk; release it to listen. RECEIVING A CALL 1 2 3 4 Turn your radio on. Adjust the radios volume, if necessary (see page 11). Select the desired channel. To respond, hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT to respond to an incoming call;
release it to listen. Method 3 (if programmed by your dealer [see pages 6 - 7]. Enhanced keypad microphone required.) 1 Press the Direct Channel Access button. 2 Enter the desired channel using the enhanced keypad microphone. 3 Press the Direct Channel Access button to confirm your selection. SENDING A CALL 1 Turn your radio on. 2 y or z to select the desired channel. 3 Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the PTT to talk; release it to listen. If your system uses the request-to-talk feature, use the following method to send a call:
1 Turn your radio on. 2 y or z to select the desired channel. 13 English Notes D E T R A T S G N T T E G I English 14 RADIO CALLS MAKING A SELECTIVE CALL You can make a selective call to a particular radio or group of radios, provided the signalling protocol supports it. Note: An enhanced keypad microphone is required to operate this feature. To make a Selective Call:
Method 1 1 Press the Radio Call button to enter Menu mode. 2 y or z until Selective Call 3 Press the Radio Call button to select Selective Call 4 y or z to locate the desired ID in the Radio Call list;
or using the enhanced keypad microphone, enter the ID number of the radio you want to call. 5 Press the PTT to send the call. The radio sounds a continuous tone. 6 Press the PTT to talk; release it to listen. 7 When finished with the call, press the Radio Call button to exit. Method 2 1 Press the Menu/Enter button to enter Menu Mode. 2 y or z until Radio Call 3 Press the Menu/
Enter button to select Radio Call 4 y or z until Selective Call 5 Press the Menu/
Enter button to select Selective Call I R A D O C A L L S 15 English S L L A C O D A R I 6 y or z to locate the desired ID in the Radio Call List;
or using the enhanced keypad microphone, enter the ID number of the radio you want to call. SENDING A CALL ALERT PAGE You can alert another person by sending a Call Alert page. Note: An enhanced keypad microphone is required to operate this feature. 7 Press the PTT to send the call. The radio sounds a continuous tone. To send a Call Alert page:
Method 1 8 Press the PTT to talk; release it to listen. 1 Press the Radio Call button to enter Menu Mode. 9 When finished with the call, 2 y or z until Call Alert press the Exit button to return to or Selective Call 3 Press the Radio Call button to select Call Alert Hold down the Exit button to exit Menu Mode. RECEIVING A SELECTIVE CALL F When you receive a selective call:
You will hear two alert tones.
The yellow LED Indicator flashes.
The LCD screen displays F and the preprogrammed name or ID of the calling radio, if available. 4 y or z to locate the desired ID in the Radio Call list;
or using the enhanced keypad microphone, enter the ID number of the radio you want to page. 5 Press the PTT to send the page. You will see Call In Prog 6 If the Call Alert page is received, English 16 you will see If not, you will see Acknowledge No Acknowledge 7 Press the Exit button to return to or Hold down the Exit button to exit Menu Mode. Call Alert Method 2 1 Press the Menu/Enter button to enter Menu Mode. 2 y or z until Radio Call 3 Press the Menu/
Enter button to select Radio Call 4 y or z until Call Alert 5 Press the Menu/
Enter button to select Call Alert 6 y or z to locate the desired ID in the Radio Call List;
or using the enhanced keypad microphone, enter the ID number of the radio you want to page. 7 Press the PTT to send the page. You will see Call In Prog 8 If the Call Alert page is received, you will see If not, you will see Acknowledge No Acknowledge 9 Press the Exit button to return to Call Alert or Hold down the Exit button to exit Menu Mode. RECEIVING A CALL ALERT PAGE When your radio receives a Call Alert page, it sounds four alert tones continuously and the following are displayed until you respond:
I R A D O C A L L S 17 English Call Received the F symbol, and the ID of the calling radio alternating with Press the PTT to answer the page, or press any other key to clear it. Note: Your radio will display only the last Call
. Alert page received. Also, your radio will not receive any Selective Calls until you clear the page. S L L A C O D A R I English 18 4 y or z to locate the desired ID in the Radio Call List;
or using the enhanced keypad microphone, enter the ID number of the radio you wish to check. RADIO CHECK This feature allows you to determine if a radio is in range without disturbing the user of the radio. Radio Check can also be used when attempts with Selective Call and Call Alert fail.
(This feature is available only if your signalling protocol supports it.) Note: An enhanced keypad microphone is required to operate this feature. To perform a Radio Check:
Method 1 1 Press the Radio Call button (if programmed) to enter the Radio Call menu. 2 y or z until Radio Check 3 Press the Radio Call button to select Radio Check I R A D O C A L L S 19 English S L L A C O D A R I 6 y or z to locate the desired ID in the Radio Call List;
or using the enhanced keypad microphone, enter the ID number of the radio you wish to check. 7 Press the PTT. You will see Call In Prog 8 If the Radio Check is received, you will see Acknowledge If not, you will see No Acknowledge 9 Press the Exit button to return to or Hold down the Exit button to exit Menu Mode. Radio Check 5 Press the PTT. You will see Call In Prog 6 If the Radio Check is received, you will see Acknowledge If not, you will see No Acknowledge 7 Press the Exit button to return to or Hold down the Exit button to exit Menu Mode. Radio Check Method 2 1 Press the Menu/Enter button to enter Menu Mode. 2 y or z until Radio Call 3 Press the Menu/Enter button to select Radio Call 4 y or z until Radio Check 5 Press the Menu/Enter button to select Radio Check English 20 RESPONDING TO EMERGENCY ALERTS (
Your radio offers choices for initiating and responding to Emergency Alert communications. Choices may include:
Emergency Cycles - Allows the radio to automatically cycle between transmit and receive mode over a preprogrammed number of times by keying with voice after it has received an Acknowledge to the alarm you send. The default number of transmits is one (10, maximum); the default value of the retransmit interval is 5 seconds (one, minimum; 60, maximum).
Emergency Alarm/Call - Gives you access to a voice resource, on a priority basis, over all other types of call traffic.
Emergency Remote Monitor - Enables the dispatcher to activate the transmit circuit of your radio, during an Emergency, to hear the situation through your microphone. See page 23 for more about sending an Emergency Remote Monitor.
Remote Monitor - Enables the dispatcher to activate the transmit circuit of your radio, during a normal dispatch, to hear the situation through your microphone. See page 23 for information about sending a Remote Monitor. Note: All the choices listed above are dealer preprogrammed. See your dealer for more details. Decoding an Emergency Alarm If preprogrammed by your dealer, and provided the signaling protocol supports it, your radio decodes (responds to) an Emergency Alarm or Emergency Call by:
Sounding a unique, repeating alert tone
Activating an external alarm
Displaying alternating message parts on a single line, similar to the following example E m e r g e n c y E I R A D O C A L L S 21 English S L L A C O D A R I 0 3 :5 5 E the word Emergency, followed by M D C E C A L L 0 1 Emergency Alias from the Radio Call List (example, MDC CALL 01), followed by Timestamp of the Emergency Alert (example, 03:55).
Flashing the E icon (while decoding only;
lights steady when encoding) Multiple Queued Emergencies Clearing the existing displayed Emergency shows the next in the queue, if one exists.The display updates and shows Emerg (queued number) of (total number). If no additional Emergencies are queued, the radio exits Emergency mode and resumes normal mode. Three Minute Timer Responding to an Emergency starts a three-
minute timer. The radio does not generate another Emergency Alert tone against that Emergency Alias or ID until the three-minute period expires. If cleared within 3 minutes, the alarm will regenerate the alert. If the radio receives another Emergency Alert from the same Alias or ID, the radio acknowledges the Emergency but does not restart the tone, activate the external alarm, or display updated information. After the Timer Expires If the three-minute timer has expired for a specific Emergency Alias or ID, and the radio decodes an Emergency that is currently in queue, the radio:
Acknowledges the Emergency
Restarts the Emergency Alert tone
Activates the external alarm
Updates the time stamp on the matching Emergency English 22 Note: If the Radio Call List does not include an alias for the radio ID, the ID displays. Radios that do not support the signaling protocol sound the alert tone, activate the external alarm and display data. CLEARING AN EMERGENCY ALERT (
To clear an Emergency Alert:
1 2 Press any button on the radio to cancel the Emergency Alert tone. Press (or activate) an external pushbutton or foot switch. Note: You must press an external switch to clear the visible Emergency Alias and display the next queued Emergency Alias, if present. You must clear all decoded Emergency Alerts before encoding (sending) your own Emergency Alert. SENDING AN EMERGENCY REMOTE MONITOR As your radio responds to an Emergency Alert, only the Emergency Queue menu is available. To access the Emergency Queue menu:
1 u to enter Menu Mode. 2 The radio displays the list of aliases currently in the Emergency queue, similar to that shown, oldest to newest. MDC CALL 01 3 z or y to view the next oldest Emergency Remote Monitor packet and to choose the packet to send. 4 Press the PTT to send the packet. I R A D O C A L L S 23 English S L L A C O D A R I SENDING AN EMERGENCY ALERT E A priority Emergency Alert can be sent to a specific radio or dispatch center by pressing:
A button preprogrammed by your dealer
(see pages 6 - 7) The footswitch
A pushbutton accessory Emergency Alerts have priority over all other calls. The E symbol will appear on the display when your radio is in the Emergency Alert state. An Emergency Alert can be programmed to:
Show E and sound a tone or
Show E (Silent Emergency) or
Activate the enhanced keypad microphone so that all activity can be transmitted (for a predetermined amount of time). See your dealer for more information. To cancel the Emergency Alert, press and hold down the Emergency button. SELECTIVE RADIO INHIBIT Your radio is equipped with a security feature that can temporarily render the unit inoperative when an inhibit signal is sent from the base station. This feature is commonly used to disable radios:
In case of theft
When your vehicle is being serviced
For system control reasons Note: When your radio has been disabled by the base station, all controls will be inoperative except for the On/Off button. When the radio is powered up, the display will show:
Radio Disabled REPEATER OR TALKAROUND J MODE Talkaround Mode enables you to communicate with another radio when either:
The repeater is not operating or
Your radio is out of the repeaters range but English 24
within communicating distance of another radio. The J symbol appears on the display when Talkaround Mode is selected. To select either Repeater Mode or Talkaround Mode:
Press the preprogrammed Repeater/
Talkaround button (see page 6) to toggle between Repeater Mode and Talkaround Mode. or (using the enhanced keypad microphone) SETTING THE POWER LEVEL B Each channel in your radio has a predefined transmit power level that can be changed.
High power ( S )
Low power ( R ) You can set the power level in two ways:
Method 1 Press the preprogrammed Power Level button
(see page 6) to toggle between low and high. 1 Press the Menu/Enter button to enter Menu or Mode. Method 2 (using the keypad microphone) 2 y or z until Rptr/Talkarnd 1 Press the Menu/Enter button to enter Menu 3 Press the Menu/
Enter button to select Rptr/Talkarnd 2 y or z until Utilities Mode. 4 y or z until Repeater Mode 3 Press the Menu/
or until Talkarnd Mode 5 Press the Menu/Enter button to confirm your selection. Enter button to select Utilities 4 y or z until Power Level 5 Press the Menu/
Enter button to select Power Level I R A D O C A L L S 25 English S L L A C O D A R I The display shows the current power level. 6 y or z until Power High?
or until Power Low?
2 y or z until Audio/Tones 3 Press the Menu/Enter button to select Audio/Tones 7 Press the Menu/Enter button to confirm the 4 y or z until Name Tone Tag selection. NAME AND CALL TONE TAGGING You can program your radio to sound a particular alert tone when:
a specific user is calling name tone tagging, or your radio is receiving a type of radio call call tone tagging. There are seven alert tones to select from. Note: The enhanced keypad microphone is required to operate this feature. To tag a specific users name or ID:
1 Press the Menu/Enter button to enter Menu Mode. 5 Press the Menu/Enter button to select Name Tone Tag 6 y or z until you see the name or call you want to tag. 7 Press the Menu/Enter button to confirm the selection. 8 y or z until you hear one of the seven tones you want to use for this name or call. 9 Press the Menu/Enter button to confirm the selection. You will see Name Tag Set 10 Press the Exit button to return to Name Tone Tag or Hold down the Exit button to exit Menu Mode. English 26
10 Press the Exit button to return to Call Tone Tag or Hold down the Exit button to exit Menu Mode. To tag a type of radio call:
1 Press the Menu/Enter button to enter Menu Mode. 2 y or z until Audio/Tones 3 Press the Menu/
Enter button to select Audio/Tones 4 y or z until Call Tone Tag 5 Press the Menu/
Enter button to select Call Tone Tag 6 y or z until you see the call type you want to tag. 7 Press the Menu/Enter button to confirm the selection. 8 y or z until you hear the tone you want to use for this type of call. 9 Press the Menu/Enter button to confirm the selection. You will see Call Tag Set I R A D O C A L L S 27 English Notes S L L A C O D A R I English 28 SCAN Your radio can monitor multiple channels in a scan list. Your dealer can program up to 16 different channels into each scan list. When your radio detects activity on a scan list channel, it will automatically switch to that channel. Note: The same channels can be assigned to different scan lists. STARTING OR STOPPING SCAN G The G symbol, and the number of the channel you are transmitting on, will appear on the display when you start a scan operation. The green LED indicator blinks during a scan operation and stops blinking when the radio switches to a channel. Note: If you enter Menu Mode while the radio is scanning, scanning will stop. It will resume when you exit Menu Mode. You can start or stop a scan operation in one of three ways:
Method 1 Press the preprogrammed Scan button (see page 6) to start or stop scanning. or Method 2 (with the enhanced keypad microphone) 1 Press the Menu/Enter button to enter Menu Mode. 2 y or z until System Scan 3 Press the Menu/Enter button to select System Scan 4 y or z until Sys Scan On?
or Sys Scan Off?
5 Press the Menu/Enter button to confirm your selection. or Method 3 If programmed by your dealer, the radio will start scanning when you select a channel that has auto scan enabled. S C A N 29 English TALKBACK The Talkback feature allows you to respond to a transmission while scanning. If a transmission on a channel is detected while scanning, the radio will stop on that channel for a preprogrammed period of time. During this hangtime you may respond by pressing the PTT. Note: If transmission stops/ceases or if the PTT is not pressed for a preprogrammed duration, the radio will continue scanning. Also, the LED scan indicator stops blinking while the radio is in hangtime. DELETING A NUISANCE CHANNEL If a channel continually generates unwanted calls or noise (a nuisance channel), use the Scan button to temporarily delete the channel from the scan list. Note: You cannot delete a priority channel (see page 32) or the last remaining channel in a scan list. Restoring a Channel to the Scan List To restore a previously deleted channel to the scan list, restart the scan operation or turn your radio off and on again. EDITING A SCAN LIST Note: The enhanced keypad microphone is required to operate this feature. A scan list is a group of up to 16 channels. Each channel can have a scan list assigned to it. The same channel can be included in several scan lists, and the same scan list can be assigned to several Channel Selector positions. For example:
Position 2 Position 14 C h a n n e l s 1 3 5 6 1 2 3 11 1 While the radio is on the nuisance channel, hold down the Scan button until you hear a tone. 2 Release the Scan button. The nuisance channel is deleted. When you edit a scan list, you can either add, delete, or prioritize channels. The K symbol will appear on the display while you are in edit mode. Note: Your radio cannot receive any calls while you are editing a scan list. N A C S English 30 Adding or Deleting Channels in a Scan List Note: The enhanced keypad microphone is required to operate this feature. To add or delete channels in a scan list:
8 y or z until you see the channel you want to add or delete. Note: You cannot delete the last remaining channel in a scan list. 1 Press the Menu/Enter button to enter Menu Mode. 9 Press the Menu/Enter button to confirm your selection. 2 y or z until Program Lists 3 Press the Menu/Enter button to select Program Lists 4 y or z until Scan List 5 Press the Menu/Enter button to select Scan List 6 y or z until Add Entry?
or until Delete Entry?
7 Press the Menu/Enter button to confirm your selection. 10 If you added a channel, Entry Saved you will see or If you deleted a channel, you will see Press the Menu/Enter button to confirm the deletion. You will see Entry Deleted Delete?
11 Press the Menu/Enter button to return to Add Entry?
or to return to or Hold down the Exit button to exit Menu Mode. Delete Entry?
S C A N 31 English Prioritizing a Channel in a Scan List Setting Priority Channels Note: The enhanced keypad microphone is Note: You cannot reprioritize a Priority 1 required to operate this feature. channel to Priority 2. You may want to check the activity on one or two channels more frequently than others. You can do this by assigning them priority:
Note: Even if there may be activity on a non-
priority channel, your radio will automatically switch to an active priority channel and indicate the activity with a short tone. Priority Channel Scanning Sequence None specified Ch1 Ch2 Ch3 Ch4 Ch1 Channel 2
(Priority 1) Channel 2
(Priority 1) Channel 8
(Priority 2) Ch2 Ch1 Ch2 Ch3 Ch2 Ch4 Ch2 Ch1 Ch2 Ch1 Ch8 Ch3 Ch2 Ch4 Ch8 Ch1 1 Press the Menu/Enter button to enter Menu Mode. 2 y or z until Program Lists 3 Press the Menu/
Enter button to select Program Lists 4 y or z until Scan List 5 Press the Menu/
Enter button to select Scan List 6 y or z until Edit Priority?
7 Press the Menu/
Enter button to select Edit Priority?
8 y or z until Priority #1?
or until Priority #2?
N A C S English 32 9 Press the Menu/Enter button to select the desired priority level. 10 y or z until you see the channel you want to prioritize. 11 Press the Menu/Enter button to prioritize that channel. 12 Press the Exit button to return to Edit Priority?
or Hold down the Exit button to exit Menu Mode. Note: If you want to reprioritize all channels, you must first delete each priority channel from the scan list, and then addit back. S C A N 33 English Notes N A C S English 34 3 y or z until Phone 4 5 Press the Exit button to select Phone You will hear a series of tones indicating that an access code is being sent automatically. You will also see your access code displayed;
or when using the enhanced keypad microphone only, enter your access code using the keypad. P H O N E PHONE If your radio has access to a telephone system, you can make a phone call. To do this, your radio must send an access code to a station that connects it to a phone line. (Ask your dealer for more details.) After completing a call, your radio must send a deaccess code to hang up. MAKING A PHONE CALL D You can make a phone call using the preprogrammed Phone button (see page 6) or the radio menu. The D symbol appears on the LCD screen when you are in Phone Mode. To initiate a phone call:
Press the Phone button. or Do the following (an enhanced keypad microphone is required):
1 2 Switch to the desired channel. Press the Menu/Enter button to enter Menu Mode. 35 English 7 8 To end a phone call, do one of the following:
If your radio has the deaccess code preprogrammed, proceed to step 8. or Enter the deaccess code using the keypad. Press the Phone button to exit Phone Mode. or Press the Exit button to exit Phone Mode and return to Phone or Hold down the Exit button to exit Menu Mode. E N O H P 6 When you hear a dial tone, enter or select a phone number:
y or z to select a number from the phone list;
or when using the enhanced keypad microphone only, enter the phone number using the keypad;
or when using the enhanced keypad microphone only, a Press and release the preprogrammed Speed Dial button (see page 7) to use the Speed Dial feature. b Press the key (1 to 8) corresponding to the number you want to call, or-
press 0 if you want to call the last number dialed. Note: To redial the last number dialed (if not using Speed Dial), do not choose a number. Proceed to step 7. Alternatively, if you entered your access code using the keypad, press z once to access the last number dialed; then press and release the PTT. English 36 AUDIO/TONE SETTINGS You can customize the audio and tone feature settings on your radio. Note: The enhanced keypad microphone is 4 y or z until you see the feature you want to change. (See the table below.) 5 Press the Menu/Enter button to select the feature. You will see the features current setting. required to use this feature. 6 y or z for available settings. (See the table below.) 1 Press the Menu/Enter button to enter Menu Mode. 7 Press the Menu/Enter button to select the desired setting. 2 y or z until Audio/Tones 3 Press the Menu/Enter button to select Audio/Tones Audio/Tone Settings Feature Alert Vol Lvl What it Does Settings Allows the volume level of the audio and the volume level of the alert tones to be set independently. Ind Alert Off Ind Alert On Tone Disable Turns all tones on or off. Tones On Tones Off S E T T N G S I I A U D O T O N E
37 English Audio/Tone Settings Feature Name Tone Tag Call Tone Tag Escalert What it Does Settings Assigns a specific tone to all calls from a specific user
(see page 26 for details). Standard Alert #1 #7 Assigns a specific tone when receiving a specific type of radio call (see page 27 for details). Standard Alert #1 #7 Gradually increases the volume of the alarm tones when a call is not answered. Escalert On Escalert Off Companding
(XPand) Approximates the same audio quality for 12.5kHz channels to that of 25kHz channels. Keypad Tones Turns keypad tones on or off. Compand On Compand Off Tones On Tones Off
E N O T O D U A I I S G N T T E S English 38 UTILITIES You can customize some of your radios features. Note: The enhanced keypad microphone is required to access this feature. 1 Press the Menu/Enter button to enter Menu Mode. 2 y or z until Utilities 3 Press the Menu/Enter button to select Utilities 4 y or z until you see the feature you want to change (see table below). 5 Press the Menu/Enter button to select the feature. You will see the features current setting. 6 y or z for available settings. 7 Press the Menu/Enter button to select the desired setting. Utilities Features What it Does Changes the power level of the radio to high or low (see page 25). Settings Power High Power Low Feature Power Level I I U T L T E S I 39 English Utilities Features What it Does Allows you to select the language displayed on the display. Activates/deactivates the option board installed in your radio. Displays the radios software version number. Feature Language Selection Option board Software Ver #
Settings English Spanish Portuguese French Opt Board On Opt Board Off SELECTING THE DISPLAY LANGUAGE To select the display language:
1 Press the Menu/Enter button to enter Menu Mode. 2 y or z until Utilities 3 Press the Menu/
Enter button to select Utilities 4 y or z until Language Selct 5 Press the Menu/Enter button to confirm your selection. 6 y or z until desired language is displayed. 7 Press the Menu/Enter button to select desired language. 8 Hold down the Exit button to exit the menu. I S E T L T U I I English 40 WARRANTY LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
MOTOROLA INC. (MOTOROLA) warrants the MOTOROLA manufactured Communication Products listed below (Product) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:
CDM1250 Mobile Units Product Accessories Two (2) Years One (1) Year Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. W A R R A N T Y This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. 41 English Y T N A R R A W II. GENERAL PROVISIONS:
III. STATE LAW RIGHTS:
This warranty sets forth the full extent of MOTOROLAs responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLAs option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product
(e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola at 1-800-927-2744 US/Canada. English 42 W A R R A N T Y V. WHAT THIS WARRANTY DOES NOT COVER:
A Defects or damage resulting from use of the Product in other than its normal and customary manner. B Defects or damage from misuse, accident, water, or neglect. C Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. D Breakage or damage to antennas unless caused directly by defects in material workmanship. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorolas normal warranty inspection and testing of the Product to verify any warranty claim. Product which has had the serial number removed or made illegible. E F G Freight costs to the repair depot. H A Product which, due to illegal or unauthorized alteration of the software/
firmware in the Product, does not function in accordance with MOTOROLAs published specifications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. Normal and customary wear and tear. I J VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
A B that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;
that MOTOROLA will have sole control of the defense of such suit and all negotiations 43 English Y T N A R R A W for its settlement or compromise; and C should the Product or parts become, or in MOTOROLAs opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. VII.GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, USA. English 44 ACCESSORIES Motorola offers a number of accessories to enhance the productivity of your two-way radio. Many of the available accessories are listed below. For a complete list, see your Motorola dealer. AUDIO RMN4025 RMN4026 RMN4038 RSN4001 HSN8145 Compact Remote Speaker Microphone Enhanced Keypad Microphone Heavy Duty Microphone External Speaker 13W External Speaker 7.5W MOUNTING GLN7324 RLN4780 HLN8097 RLN4779 RLN4774 RLN4782 RKN4077 RKN4078 RKN4079 Low Profile Trunnion High Profile Trunnion Removable Slide Mount Key Lock Mount 3 Point Lowband Mount DIN Mounting Kit (in dash) Remote Mount Cable - 3 m Remote Mount Cable - 5 m Remote Mount Cable - 7 m A C C E S S O R E S I 45 English I S E R O S S E C C A ANTENNAS RAB4002ARB Lowband 29.7-36 MHz, 1/4 Wave Base Load RAB4003ARB Lowband 36-42 MHz, 1/4 Wave Base Load RAB4004ARB Lowband 42-52 MHz, 1/4 Wave Base HAD4006A HAD4007A HAD4008A HAD4009A HAD4014A HAE4002A HAE4003A HAE4010A HAE4011A HAE4019A Load VHF 136-144 MHz, 1/4 Wave Roof Mount VHF 146-150.8 MHz, 1/4 Wave Roof Mount VHF 150.8-162 MHz, 1/4 Wave Roof Mount VHF 162-174 MHz, 1/4 Wave Roof Mount VHF 146-172 MHz, 3dB Gain Roof Mount UHF 403-430 MHz, 1/4 Wave Roof Mount UHF 450-470 MHz, 1/4 Wave Roof Mount UHF 406-420 MHz, 3.5dB Gain Roof Mount UHF 450-470 MHz, 3.5dB Gain Roof Mount UHF 450-470 MHz, 5dB Gain Roof Mount HAE4004A HAE4012A UHF 470-512 MHz, 1/4 Wave Roof Mount UHF 470-494 MHz, 3.5dB Gain Roof Mount 09-02105F01 BNC Connector CONTROL STATION GPN6145 HPN4002 GPN6149 HPN4001 RMN4030 GLN7318 GLN7326 Desktop Power Supply 1-25W (EMC) Desktop Power Supply 1-25W Desktop Power Supply 25-45W (EMC) Desktop Power Supply 25-45W Desktop Microphone Desktop Tray without Speaker Desktop Tray with Speaker Note: A variety of interchangeable buttons are available for use in the P1-P4 locations on your radio (page 3). See your dealer for further details. English 46 Sending a Call 1. Turn radio on and select appropriate zone and channel. 2. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it. 3. Release PTT to listen. Receiving a Call 1. Turn radio on and adjust volume to the desired level. 2. Select desired channel. 3. To respond to an incoming call, press PTT, hold the microphone 1 to 2 inches
(2.5 to 5 cm) from your mouth, and speak clearly into it. Deleting a Nuisance Channel During Scanning 1. While radio is on a nuisance channel, hold down preprogrammed Scan button until you hear a tone. 2. Release Scan button. Making a Phone Call 1. Press Phone button, or select Phone from the menu. 2. 3. Send phone number in one of the following ways:
If access code is not displayed, send access code if required.
Press and release PTT to send last dialed number. or
when using enhanced keypad microphone only, press preprogrammed Speed Dial button, followed by a keypad key (18), to access first nine num-
bers in your phone list. (Press PTT if buffered dial.) or
when using enhanced keypad microphone only, enter phone number using the keypad. (Press PTT if buffered dial.) 4. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it. Ending a Phone Call 1. Send deaccess code if required. 2. Press preprogrammed Phone button, or press the Exit key. Sending and Cancelling an Emergency Alert
To activate Emergency Alert, press preprogrammed Emergency button or footswitch.
To cancel, press and hold down Emergency button. CDM1250 Quick Reference Card Record the functions for your radios programmable buttons in the table provided below. For further information, see page 6 of this User Guide. Red/Yellow/Green LED Indicators LCD Screen Channel Selector
(Up/Down) On/Off/Volume Knob Programmable Button 3 (P3)
(Interchangeable) Microphone Jack Programmable Button 1 (P1)
(Interchangeable) Programmable Button 2 (P2)
(Interchangeable) Programmable Button 4 (P4)
(Interchangeable) MAEPF 26782 O Button Function Short Press Long Press Hold Down Page Menu Navigation Chart
(Refer to Menu Navigation guidelines lower, left-hand corner of this page) Menu/Enter y z System Scan
(p. 29) y z on/off Program Lists y z Scan List
(p. 30) add/delete entry edit priority Menu Navigation Press the Menu/Enter button to enter Menu Mode. y or z to scroll through the list. Press the Menu/Enter button to select Menu item. Press the Exit button to return to previous menu level or Hold down the Exit button to exit Menu Mode. Phone
(p. 35) Radio Call
(p. 16) y y Zone
(p. 12) Utilities
(p. 39) y z Selective Call Call Alert Radio Check select/
enter ID select/
enter ID select/
enter ID Power Level high/low Language Select select Option Board on/off Software Ver #
y or z to scroll through sub-list. Press the Menu/Enter button to select sub-menu item. Rptr/
Talkarnd
(p. 24) Audio/
Tones
(p. 37) y z y z repeater mode/
talkarnd mode Alert Vol Lvl on/off Tone Disable on/off Name Tone Tag standard/alert
#1 - #7 Call Tone Tag standard/alert
#1 - #7 Escalert on/off Companding on/off Keypad Tones on/off
1 | RF Safety Manual | Users Manual | 81.28 KiB | November 12 2002 |
Product Safety and RF Exposure for Mobile Two-Way Radios Installed in Vehicles or as Fixed Site Control Stations
(CDM Professional Series CDM750 / CDM1250 / CDM1550 UHF Band 2 [450-512 MHz] 1.5ppm Models) BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS.
C a u t i o n The information provided in this document supersedes the general safety information contained in user guides published prior to February 2002. Compliance with RF Energy Exposure Standards NOTICE: This radio is intended for use in occupational/controlled applications where users have been made aware of the potential for exposure and can exercise control over their exposure. This radio device is NOT authorized for general population, consumer or similar use. Motorola, Inc. 2002 8000 W. Sunrise Blvd., Ft. Lauderdale, FL 33322 Printed in U.S.A. 7/02.
*6881096C69*
68P81096C69-O English Federal Communication Commission Regulations The FCC has established limits for safe exposure to radio frequency (RF) emissions from mobile two-way radios. The FCC requires manufacturers to demonstrate compliance with RF exposure limits before mobile two-way radios can be marketed in the U.S. When two-way radios are approved for occupational/controlled environment exposure limits, the FCC requires users to be fully aware of, and exercise control over, their exposure. Awareness and control of RF exposure can be accomplished by education or training through appropriate means such as information and instructions in user manuals or safety booklets, or other appropriate means. This user safety booklet includes useful information about RF exposure and helpful instructions on how to control your RF exposure. Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at usage factors of up to 50% talk50% listen. In terms of measuring RF energy for compliance with FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting
(during talking), not when it is receiving (listening) or in standby mode. English 2 Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines:
United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J
American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999
Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard, 2001
ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001)
additional requirements for SMR, cellular and PCS product certification. 3 English Compliance and Control Guidelines and Operating Instructions for Mobile Two-Way Radios Installed in Vehicles To control your exposure and ensure compliance with the occupational/
controlled environment exposure limits, always adhere to the following procedures:
To transmit (talk), push the Push-To-Talk (PTT) button; to receive, release the PTT button. Transmit only when people outside the vehicle are at least the minimum lateral distance away (as shown in the table below) from a properly installed, externally-mounted antenna. The table below lists the minimum lateral distance for bystanders in an uncontrolled environment from the transmitting antenna at several different ranges of rated radio power for mobile radios installed in a vehicle. Rated Power of Vehicle-Installed Mobile Two-way Radio 25 to 48 watts Minimum Lateral Distance from Transmitting Antenna 2.5 feet (76 centimeters)
Install mobile antennas at the center of the roof or the center of the trunk deck. These mobile antenna installation guidelines are limited to metal body vehicles. The antenna installation must additionally be in accordance with:
- The requirements of the antenna manufacturer/supplier
Instructions in the Radio Installation Manual English 4 Use only the Motorola-approved, supplied antenna or a Motorola-
approved replacement antenna. Use of nonMotorola-approved antennas, modifications, or attachments could damage the radio and may violate FCC regulations.
For a list of Motorola-approved antennas, visit the following web site:
http://www.motorola.com/cgiss/index.shtml. For additional information on exposure requirements or other training information, visit http://www.motorola.com/rfhealth. Compliance and Control Guidelines and Operating Instructions for Mobile Two-Way Radios Installed as Fixed Site Control Stations If mobile radio equipment is installed at a fixed location and operated as a control station or as a fixed unit, the antenna installation must comply with the following requirements in order to ensure optimal performance and compliance with the RF energy exposure limits in the standards and guidelines listed on page 3:
The antenna should be mounted outside the building on the roof or a tower if at all possible.
As with all fixed site antenna installations, it is the responsibility of the licensee to manage the site in accordance with applicable regulatory requirements and may require additional compliance actions such as site survey measurements, signage, and site access restrictions in order to ensure that exposure limits are not exceeded. 5 English Electromagnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. It may be necessary to conduct compatibility testing to determine if any electronic equipment used in or around vehicles or near fixed site antenna is sensitive to external RF energy or if any procedures need to be followed to eliminate or mitigate the potential for interaction between the radio transmitter and the equipment or device. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Vehicles To avoid possible interaction between the radio transmitter and any vehicle electronic control modules, for example, ABS, engine, or transmission controls, the radio should be installed only by an experienced installer and that the following precautions be used when installing the radio:
1. Refer to the manufacturers instructions or other technical bulletins or recommendations on radio installation. 2. Before installing the radio, determine the location of the electronic control modules and their harnesses in the vehicle. 3. Route all radio wiring, including the antenna transmission line, as far away as possible from the electronic control units and associated wiring. English 6 Driver Safety Check the laws and regulations on the use of radios in the area where you drive. Always obey them. When using your radio while driving, please:
Give full attention to driving and to the road.
Pull off the road and park before making or answering a call if driving conditions so require. Operational Warnings
W A R N I N G For Vehicles With an Air Bag Do not mount or place a mobile radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Turn off your radio prior to entering any area with a potentially explosive atmosphere. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted. 7 English
W A R N I N G Blasting Caps and Blasting Areas To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: Turn off two-way radio. Obey all signs and instructions. For radios installed in vehicles fueled by liquefied petroleum gas, refer to the (U.S.) National Fire Protection Association standard, NFPA 58, for storage, handling, and/or container information. For a copy of the LP-gas standard, NFPA 58, contact the National Fire Protection Association, One Battery Park, Quincy, MA. English 8
1 | Certification of Data | Attestation Statements | 5.22 KiB | November 12 2002 |
MOTOROLA INC. FCC ID: AZ492FT4859 CERTIFICATION OF DATA NAME: Samsun Zaini STATEMENT OF CERTIFICATION The technical data supplied with this application, having been taken under my supervision is hereby duly certified. The following is a statement of my qualifications:
I have received a B Eng. in Computer and Communication degree from University of Science, Penang, Malaysia in 1994. I have more than 7 years of Product Development experience in the field of two-way radio communication. I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct:
POSITION: Engineering Section Manager POSITION: Engineering Group Leader SIGNATURE: Azanor Muhammad DATE: 26th November 2002 DATE: 26th November 2002 SIGNATURE: Samsun Zaini NAME: Azanor Muhammad EXHIBIT 2 1 of 1
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2002-12-11 | 450 ~ 512 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2002-12-11
|
||||
1 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0003778479
|
||||
1 | Physical Address |
8000 West Sunrise Blvd
|
||||
1 |
Ft Lauderdale, Florida 33322
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
d******@elitetest.com
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AZ4
|
||||
1 | Equipment Product Code |
92FT4859
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
D******** Z******
|
||||
1 | Title |
Regulatory Compliance Manager
|
||||
1 | Telephone Number |
95472********
|
||||
1 | Fax Number |
--********
|
||||
1 |
d******@motorolasolutions.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Mobile and Base Station Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power is conducted maximum. Nominal output power is 40W. RF exposure compliance was evaluated at 48W using 0 dBi, 3.5 dBi, 5 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 60 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 60 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting occupational /Controlled Exposure Environment requirements. Single channel mode. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
n/a | ||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22 | BM | 450 | 512 | 48 | 1.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
1 | 2 | 74 | BM | 450 | 512 | 48 | 1.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
1 | 3 | 9 | BM | 450 | 512 | 48 | 1.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
1 | 4 | 22 | BM | 450 | 512 | 48 | 1.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 5 | 74 | BM | 450 | 512 | 48 | 1.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 6 | 90.21 | BM | 450 | 512 | 48 | 1.5 ppm | 11K0F3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC