all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 898.14 KiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Attestation Statements | |||||||
1 2 | Block Diagram | |||||||
1 2 | External Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Internal Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Operational Description | |||||||
1 2 | Parts List/Tune Up Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Schematics | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos |
1 2 | Users Manual | Users Manual | 898.14 KiB |
contact C A, Motorola, Professional Radio, PRO Series, CDM1550, As Dedicated As You Are, and Call Alert are trademarks of Motorola, Inc.
' 1999 Motorola, Inc. All rights reserved. Printed in U.S.A. A, Motorola, Radio Professionnelle, Srie PRO, CDM1550, Aussi spcial-
ise que vous ltes, et Call Alert sont des marques de Motorola, Inc.
' 1999 Motorola, Inc. Tous droits rservs. Imprim aux tats-Unis.
*6881091C56*
68P81091C56-0 CDM1550 Mobile Radio Radio Mobile contact control User Guide Guide de lusager CDM1550 control e r A u o Y s A d e a c i d e D s A t i o d a R i l a n o s s e o r P f English.book Page i Thursday, August 12, 1999 10:09 AM CONTENTS Computer Software Copyrights . iii Radio Overview . 1 Parts of the Radio . 1 Optional Enhanced Keypad Microphone (RMN4026) . 2 On/Off/Volume Knob . 3 Channel Selector/Menu Navigation Buttons . 3 LED Indicators . 3 Programmable Buttons . 3 Push-to-Talk (PTT) Button . 6 Microphone . 6 Menu Keys . 6 Use with Enhanced Keypad Microphone (RMN4026) . 7 LCD Screen . 9 Audio Indicators for Programmable Buttons . 10 Getting Started . 11 Turning the Radio On or Off . 11 Adjusting the Volume . 11 Selecting a Zone . 12 Selecting a Radio Channel . 12 Sending a Call . 13 Receiving a Call . 13 Radio Calls . 15 Making a Selective Call . 15 Receiving a Selective Call . 15 Sending a Call Alert Page. 16 Receiving a Call Alert Page . 16 Radio Check . 17 Sending a Status . 17 Sending a Message . 18 Receiving a Message . 19 Sending an Emergency Alert . 19 Selective Radio Inhibit . 20 Editing a Radio Call List . 20 Repeater or Talkaround Mode . 21 Setting the Power Level . 21 Name and Call/Message Tone Tagging . 22 Scan . 25 Starting or Stopping Scan. 25 Talkback . 26 Deleting a Nuisance Channel . 26 Restoring a Channel to the Scan List . 26 Editing a Scan List . 26 Adding or Deleting Channels in a Scan List . 27 C O N T E N T S i English S T N E T N O C English.book Page ii Thursday, August 12, 1999 10:09 AM Exposure to Radio Frequency Energy . 43 Mobile Radio Operation and EME Exposure. 44 Electromagnetic Interference/
Compatibility . 44 Operational Warnings . 45 Vehicles with an Air Bag . 45 Potentially Explosive Atmospheres. 45 Blasting Caps and Blasting Areas. 45 Mobile Antenna Installation . 46 Control Station Operation. 46 Limited Warranty . 47 Accessories . 51 Audio . 51 Mounting . 51 Antennas . 52 Control Station . 52 Prioritizing a Channel in a Scan List . 28 Setting Priority Channels . 28 Phone. 31 Making a Phone Call . 31 Modifying the Phone List . 32 Adding an Entry (when using the enhanced keypad microphone only) . 32 Deleting an Entry . 33 Editing an Entry (when using the enhanced keypad microphone only) . 34 Editing an Access/Deaccess Code
(when using the enhanced keypad microphone only) . 35 Audio/Tone Settings. 37 Utilities. 39 Setting the Time . 41 Displaying the Time . 42 Selecting the Display Language . 42 Safety and Warranty. 43 Safe and Efficient Operation of Motorola Two-Way Radios . 43 English ii English.book Page iii Thursday, August 12, 1999 10:09 AM COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modied, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. C O N T E N T S iii English English.book Page iv Thursday, August 12, 1999 10:09 AM Notes S T N E T N O C English iv English.book Page 1 Thursday, August 12, 1999 10:09 AM RADIO OVERVIEW PARTS OF THE RADIO On/Off/Volume Knob Red/Yellow/Green LED Indicators LCD Screen Channel Selector/
Menu Navigation Buttons
(Up/Down) Menu Exit/Escape Button Menu Enter/Select Button Programmable Button 3 (P3)
(Interchangeable) I R A D O O V E R V E W I Microphone Jack Programmable Button 1 (P1)
(Interchangeable) Programmable Button 2 (P2)
(Interchangeable) Editing Buttons
(Left/Right) Programmable Button 4 (P4)
(Interchangeable) 1 English English.book Page 2 Thursday, August 12, 1999 10:09 AM Optional Enhanced Keypad Microphone
(RMN4026) Your radio may be ordered with an optional DTMF (Dual-Tone Multi-Frequency) microphone that has a direct entry keypad. This enhanced keypad microphone has three buttons (A, B, C) below the keypad that can be programmed to conveniently activate select radio features. Push-to-Talk
(PTT) button Keypad Programmable Buttons
(A, B, C) FL0830328O I W E V R E V O O D A R I English 2 English.book Page 3 Thursday, August 12, 1999 10:09 AM On/Off/Volume Knob Turns the radio on or off, and adjusts the radios volume. Channel Selector/Menu Navigation Buttons y or z Used for channel scrolling. When in menu mode, used for menu navigation. LED Indicators Indicates channel, scan, and monitor status, as well as receipt of a selective call. Programmable Buttons Your radio has several programmable buttons. Your dealer can program these buttons as shortcuts to various radio features. Check with your dealer for a complete list of functions your radio supports. Programmable buttons include the i buttons (see page 1).
, and j g
, h Some buttons can access up to two features, depending on the type of button press:
short press quickly pressing and releasing the programmable buttons pressing and holding the long press programmable buttons for a period of time
(default 1 1/2 seconds or programmed value) hold down pressing and holding down the programmable buttons while checking status or making adjustments A summary of programmable radio features and corresponding page references appears beginning on page 4. In the Button column, have your dealer record the name of the programmable button next to the feature that has been programmed to it. The dealer can use the abbreviations (P1, P2, P3, P4) shown in the radio illustration on page 1. Also, where appropriate, have your dealer indicate whether the button press requires a short press, a long press, or needs to be held down. I R A D O O V E R V E W I 3 English English.book Page 4 Thursday, August 12, 1999 10:09 AM Function Indicator Short Press Long Press Volume Set Direct Zone Access Home Revert Direct Channel Access PRTT (Priority Request-to-Talk) Emergency Power Level Repeater/
Talkaround Scan/Nuisance Channel Delete E B J G Direct entry to zone selection menu. Takes you directly to a pre-programmed zone/channel combination. Toggle the direct access channel feature.
(Enhanced keypad microphone required.) Sends a priority access request to the dispatcher. Initiate Emergency Alert. Cancel Emergency status. Toggle transmit power level between High and Low. Toggle between using a repeater or transmitting directly to another radio. Delete a nuisance channel while scanning. Toggle scan on and off. I W E V R E V O O D A R I Phone This function is activated by D Access Phone Mode. EITHER a short OR a long press, but not both. Hold Down Page Button Sound a tone for adjusting your radios volume level. 11 12 13 13 13 19 21 21 25 31 English 4 English.book Page 5 Thursday, August 12, 1999 10:09 AM Function Indicator Short Press Long Press Hold Down Page Button Speed Dial Access your phone list directly. Monitor Option Board
(if one is installed) Radio Call Light Auxiliary Control (1/2) Status One-Touch Status Message One-Touch Message Horn and Lights Toggle silent monitor operation (also turn off open squelch monitor when it has been activated). Turn on open squelch monitor. Toggle between activating and deactivating the option board. Access the radio call menu. Adjust brightness level (off/low/med/high). Activates or deactivates a pin on the accessory connector.
(See your dealer.) Direct entry to the status menu. Immediately sends a preprogrammed status. Direct entry to the message menu. Immediately sends a preprogrammed message. Toggles external alarm feature or cancels a triggered alarm. C N 31 I R A D O O V E R V E W I This function is activated by EITHER a short OR a long press, but not both. 5 English Up Key y and Down Key z Used for channel scrolling. When in Menu Mode, used for menu navigation. Right Key w Moves the cursor right or inserts a space when editing or Zone scrolling. Left Key v Moves the cursor left or used as a backspace key when editing or Zone scrolling. English.book Page 6 Thursday, August 12, 1999 10:09 AM Push-to-Talk (PTT) Button Press and hold down this button to talk;
release it to listen. Microphone Hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it. Menu Keys Up Exit Menu/
Select t y u v z w Left Right Down Menu/Select Key u Used to enter Menu Mode. When in Menu Mode, this key is also used to make menu selections. Exit Key t Used to move to the previous Menu level (short press) or to exit Menu Mode (long press). I W E V R E V O O D A R I English 6 English.book Page 7 Thursday, August 12, 1999 10:09 AM Use with Enhanced Keypad Microphone
(RMN4026
) These keys are used to:
Dial a phone number Make a radio call Enter information when programming radio lists Directly access preprogrammed features Each key can generate several different characters. For example, to enter the character C, press the following table.) key three times. (Refer to the 2 I R A D O O V E R V E W I 7 English English.book Page 8 Thursday, August 12, 1999 10:09 AM Entering Characters Using the Keypad Number of Times Key is Pressed Key 0 1 2 3 4 1 0 1 A D G 5 J 6 M 7 P 8 T 9 W
2
B E H K N Q U X
Blank Space 3
) 4
C F I L O R V Y
2 3 4 5 6 S 8 Z
. 5
a d g j m 7 t 9
6 7 8 9 10 11 12 13 14 15 16 17 b e h k n p u w
c f i l o q v x 2 3 4 5 6 r 8 y s z 7 9 Y y
I W E V R E V O O D A R I English 8 English.book Page 9 Thursday, August 12, 1999 10:09 AM LCD Screen Symbol Indication The top screen row displays radio status information:
Symbol A Companding B Power Level Indication The Companding feature is activated. When in narrow band, this feature improves audio quality. Low Power R or High Power S is activated. C Carrier Squelch
(CSQ) The radio is on a CSQ channel, monitor is active, or the microphone is off-hook. D Phone E Emergency F Call Received G Scan Priority 1 Scan ashing)
H Priority 2 Scan
steady) Phone Mode is selected. An Emergency Alert is being sent. A Selective Call or Call Alert has been received. The Scan feature is active. Flashes when Scan is suspended. During Scan, indicates that the scan has locked on to a priority 1 channel. During Scan, indicates that the scan has locked on to a priority 2 channel. I R A D O O V E R V E W I 9 English English.book Page 10 Thursday, August 12, 1999 10:09 AM Symbol Indication AUDIO INDICATORS FOR PROGRAMMABLE BUTTONS J Talkaround K Programming Mode M Signal Strength N Option Board The radio is not transmitting through a repeater. The radio is in Program List editing mode. Indicates signal strength. The more bars, the stronger the signal. Option board is enabled. Q L Not currently assigned. Not currently assigned. Low-High Tone High-Low Tone In addition to having associated visual indicators, some programmable buttons use tones to indicate one of two modes:
Button Low-High Tone High-Low Tone Scan Power Level Start scan High power selected Stop scan Low power selected Option Board Enabled Disabled Repeater/
Talkaround Does not use repeater Uses repeater I W E V R E V O O D A R I English 10 English.book Page 11 Thursday, August 12, 1999 10:09 AM GETTING STARTED TURNING THE RADIO ON OR OFF OFF Push the On/Off/
Volume Control knob until you hear a click and the display clears. ON Push the On/Off/
Volume Control knob until you hear a click. If power-up is successful, you will hear the Self-Test Pass Tone. If the radio fails to power up, you will hear the Self-Test Fail Tone
. ADJUSTING THE VOLUME Turn the On/Off/Volume Control knob clockwise to increase the volume, or counterclockwise to decrease the volume. or 1 Hold down the Volume Set button (see page 4). You will hear a continuous tone. 2 Turn the On/Off/Volume Control knob to the desired volume level. 3 Release the Volume Set button. I G E T T N G S T A R T E D 11 English English.book Page 12 Thursday, August 12, 1999 10:09 AM SELECTING A ZONE A zone is a group of up to 16 channels. Before you can access a channel in a zone, you must select the zone in one of three ways:
Method 1 1 u to enter Menu Mode. 2 y or z until 3 u to select ZZZZoooonnnneeee ZZZZoooonnnneeee 4 y or z until you see the desired zone name. 5 u to select the zone. Method 2 (if programmed by your dealer [see pages 4-5]). 1 Press the Direct Zone Access button. 2 y or z until you reach the desired zone. 3 u to select the zone. Method 3 Press v to select the previous zone. If pressed while the rst zone is selected, the radio will wrap around to the last zone.
-or-
Press w to select the next zone. If pressed while the last zone is selected, the radio will wrap around to the rst zone. SELECTING A RADIO CHANNEL Your radio offers 128 channels (8 zones of 16 channels each). Note: Due to government regulations, some channels may not be programmed. See your dealer for more information. There are three ways to select a channel:
Method 1 1 Select the appropriate Zone, if required. 2 y or z until you reach the desired channel, shown on the screen. D E T R A T S G N T T E G I English 12 English.book Page 13 Thursday, August 12, 1999 10:09 AM Method 2 (if programmed by your dealer [see pages 4 -5]). If your system uses the request-to-talk feature, use the following method to send a call:
1 Press the Home Revert button. 1 Turn your radio on. Method 3 (if programmed by your dealer [see pages 4 -5]). 1 Press the Direct Channel Access button. 2 Enter the desired channel using the enhanced keypad microphone. 2 y or z to select the desired channel. 3 Press the PTT (for priority requests to talk, the PRTT button) and wait for the talk permit tone. 4 Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the PTT to talk; release it to listen. 3 u to conrm your selection. 5 Release the PTT to listen. SENDING A CALL 1 Turn your radio on. 2 y or z to select the desired channel. 3 Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the PTT to talk; release it to listen. RECEIVING A CALL 1 2 3 4 Turn your radio on. Adjust the radios volume if necessary (see page 11). Select the desired channel. To respond, hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth. Press the PTT to talk; release it to listen. I G E T T N G S T A R T E D 13 English English.book Page 14 Thursday, August 12, 1999 10:09 AM Notes D E T R A T S G N T T E G I English 14 English.book Page 15 Thursday, August 12, 1999 10:09 AM RADIO CALLS MAKING A SELECTIVE CALL You can make a selective call to a particular radio or group of radios, provided the signaling protocol supports it. To make a Selective Call:
1 u to enter Menu Mode. 2 y or z until RRRRaaaaddddiiiioooo CCCCaaaallllllll 3 u to select RRRRaaaaddddiiiioooo CCCCaaaallllllll 4 y or z until SSSSeeeelllleeeeccccttttiiiivvvveeee CCCCaaaallllllll 5 u to select SSSSeeeelllleeeeccccttttiiiivvvveeee CCCCaaaallllllll 6 y or z to locate the desired ID in the Radio Call List. or when using the enhanced keypad microphone only, enter the ID number of the radio you want to call. 7 8 Press the PTT to send the call. The radio sounds a continuous tone. Press the PTT to talk; release it to listen. 9 When nished with the call, t to return to or Hold down t to exit Menu Mode. SSSSeeeelllleeeeccccttttiiiivvvveeee CCCCaaaallllllll RECEIVING A SELECTIVE CALL F When you receive a selective call:
You will hear two alert tones. The LED Indicator ashes yellow. The LCD screen displays F and the preprogrammed name or ID of the calling radio, if available. I R A D O C A L L S 15 English S L L A C O D A R I English.book Page 16 Thursday, August 12, 1999 10:09 AM SENDING A CALL ALERT PAGE You can alert another person by sending a Call Alert page. To send a Call Alert page:
1 u to enter Menu Mode. 2 y or z until RRRRaaaaddddiiiioooo CCCCaaaallllllll 3 u to select RRRRaaaaddddiiiioooo CCCCaaaallllllll 4 y or z until CCCCaaaallllllll AAAAlllleeeerrrrtttt 5 ) to select CCCCaaaallllllll AAAAlllleeeerrrrtttt 6 y or z to locate the desired ID in the Radio Call List;
or when using the enhanced keypad microphone only, enter the ID number of the radio you want to page. 7 Press the PTT to send the page. You will see CCCCaaaallllllll IIIInnnn PPPPrrrroooogggg 8 If the Call Alert page is received, you will see If not, you will see AAAAcccckkkknnnnoooowwwwlllleeeeddddggggeeee NNNNoooo AAAAcccckkkknnnnoooowwwwlllleeeeddddggggeeee 9 t to return to CCCCaaaallllllll AAAAlllleeeerrrrtttt or Hold down t to exit Menu Mode. RECEIVING A CALL ALERT PAGE When your radio receives a Call Alert page, it sounds four alert tones continuously and the following are displayed until you respond:
the F symbol, and the ID of the calling radio alternating with Call Received. Press the PTT to answer the page, or press any other key to clear it. Note: Your radio will display only the last Call Alert page received. Also, your radio will not receive any Selective Calls until you clear the page. English 16 English.book Page 17 Thursday, August 12, 1999 10:09 AM RADIO CHECK This feature allows you to determine if a radio is in range without disturbing the user of the radio. Radio Check can also be used when attempts with Selective Call and Call Alert fail.
(This feature is available only if your signaling protocol supports it.) To perform a Radio Check:
1 u to enter Menu Mode. 2 y or z until RRRRaaaaddddiiiioooo CCCCaaaallllllll 3 u to select RRRRaaaaddddiiiioooo CCCCaaaallllllll 4 y or z until RRRRaaaaddddiiiioooo CCCChhhheeeecccckkkk 5 u to select RRRRaaaaddddiiiioooo CCCChhhheeeecccckkkk 6 y or z to locate the desired ID in the Radio Call List;
or when using the enhanced keypad microphone only, enter the ID number of the radio you are checking. 7 8 Press the PTT. You will see CCCCaaaallllllll IIIInnnn PPPPrrrroooogggg If the Radio Check is received, you will see AAAAcccckkkknnnnoooowwwwlllleeeeddddggggeeee If not, you will see NNNNoooo AAAAcccckkkknnnnoooowwwwlllleeeeddddggggeeee I R A D O C A L L S 9 t to return to RRRRaaaaddddiiiioooo CCCChhhheeeecccckkkk RRRRaaaaddddiiiioooo CCCChhhheeeecccckkkk or Hold down t to exit Menu Mode. SENDING A STATUS This feature gives you the ability to send a status update to the base. The status feature makes more efcient use of the channel compared to voice transmissions. Status updates of up to 14 characters may be programmed by your dealer. To send a Status:
1 u to enter Menu Mode. 2 y or z until SSSSttttaaaattttuuuussss 3 u to select SSSSttttaaaattttuuuussss 17 English S L L A C O D A R I English.book Page 18 Thursday, August 12, 1999 10:09 AM 4 y or z to locate the desired status in the preprogrammed list. or when using the enhanced keypad microphone only, enter the number of the status you wish to send. or if programmed by your dealer (see pages 4-5), press the button that has been preprogrammed for a specic status. Note: You cannot retransmit the current status update. SENDING A MESSAGE This feature gives you the ability to send and receive preprogrammed messages. Data messages make more efcient use of channels compared to voice transmissions. Messages of up to 14 characters may be programmed by your dealer. To send an electronic (data) message:
1 u to enter Menu Mode. 2 y or z until MMMMeeeessssssssaaaaggggeeee 3 u to select MMMMeeeessssssssaaaaggggeeee 4 y or z to locate the desired message in the preprogrammed list. or when using the enhanced keypad microphone only, enter the number of the message you wish to send. or if programmed by your dealer (see pages 4-5), press the button that has been preprogrammed for a specic message. English 18 English.book Page 19 Thursday, August 12, 1999 10:09 AM Emergency Alerts have priority over all other calls. The E symbol will appear on the display when your radio is in the Emergency Alert state. An Emergency Alert can be programmed to:
Show E and sound a tone or Show E (Silent Emergency) or Activate the microphone so that all activity can be transmitted (for a predetermined amount of time). See your dealer for more information. To cancel the Emergency Alert, press and hold down the Emergency button. RECEIVING A MESSAGE When your radio receives a message:
You will hear two alert tones. The yellow LED indicator ashes. The LCD screen displays alternating with the preprogrammed alias. MMMMssssgggg RRRReeeecccceeeeiiiivvvveeeedddd Note: If you receive a message that is programmed into your radio, the display will alternate with the following:
MMMMeeeessssssssaaaaggggeeee ####____ and NNNNoooo AAAAlllliiiiaaaassss SENDING AN EMERGENCY ALERT E A priority Emergency Alert can be sent to a specic radio or dispatch center by pressing:
A button preprogrammed by your dealer
(see pages 4-5). The footswitch A pushbutton accessory I R A D O C A L L S 19 English S L L A C O D A R I English.book Page 20 Thursday, August 12, 1999 10:09 AM SELECTIVE RADIO INHIBIT Your radio is equipped with a security feature that can temporarily render the unit inoperative when an inhibit signal is sent from the base station. This feature is commonly used to disable radios:
When your vehicle is being serviced For system control reasons Note: When your radio has been disabled by In case of theft the base station, all controls will be inoperative except for the On/Off button. When the radio is powered up, the display will show:
RRRRaaaaddddiiiioooo DDDDiiiissssaaaabbbblllleeeedddd EDITING A RADIO CALL LIST K The ID numbers in your Radio Call List are preprogrammed by your dealer. However, you can edit the names associated with these IDs using the enhanced keypad microphone. The K symbol will appear on the display when you are editing. Note: Your radio cannot receive any calls while you are editing. To edit a Call List entry:
1 u to enter Menu Mode. 2 y or z until PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 3 u to select PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 4 y or z until RRRRaaaaddddiiiiooooCCCCaaaallllllll LLLLiiiisssstttt 5 u to select RRRRaaaaddddiiiiooooCCCCaaaallllllll LLLLiiiisssstttt 6 y or z until EEEEddddiiiitttt EEEEnnnnttttrrrryyyy????
7 u to select EEEEddddiiiitttt EEEEnnnnttttrrrryyyy????
8 y or z until you locate the desired entry. 9 u to select the entry. 10 Use your keypad to edit the entry (see page 7). 11 u to save your changes. You will see EEEEnnnnttttrrrryyyy SSSSaaaavvvveeeedddd English 20 English.book Page 21 Thursday, August 12, 1999 10:09 AM 12 t to return to EEEEddddiiiitttt EEEEnnnnttttrrrryyyy????
or Hold down t to exit Menu Mode. REPEATER OR TALKAROUND J MODE Talkaround Mode enables you to communicate with another radio when either:
The repeater is not operating. or Your radio is out of the repeaters range but within communicating distance of another radio. The J symbol appears on the display when Talkaround Mode is selected. To select either Repeater Mode or Talkaround Mode:
Press the preprogrammed Repeater/
Talkaround button (see page 4) to toggle between Repeater Mode and Talkaround Mode. or 2 y or z until RRRRppppttttrrrr////TTTTaaaallllkkkkaaaarrrrnnnndddd 3 u to select RRRRppppttttrrrr////TTTTaaaallllkkkkaaaarrrrnnnndddd 4 y or z until RRRReeeeppppeeeeaaaatttteeeerrrr MMMMooooddddeeee or until TTTTaaaallllkkkkaaaarrrrnnnndddd MMMMooooddddeeee 5 u to conrm your selection. SETTING THE POWER LEVEL B Each channel in your radio has a predened transmit power level that can be changed. High power ( S ) Low power ( R ) You can set the power level in two ways:
Method 1 Press the preprogrammed Power Level button
(see page 4) to toggle between low and high. or Method 2 1 u to enter Menu Mode. 1 u to enter Menu Mode. I R A D O C A L L S 21 English S L L A C O D A R I English.book Page 22 Thursday, August 12, 1999 10:09 AM 2 y or z until UUUUttttiiiilllliiiittttiiiieeeessss 3 u to select UUUUttttiiiilllliiiittttiiiieeeessss 4 y or z until PPPPoooowwwweeeerrrr LLLLeeeevvvveeeellll 5 u to select PPPPoooowwwweeeerrrr LLLLeeeevvvveeeellll The display shows the current power level. To tag a specic users name or message:
1 u to enter Menu Mode. 2 y or z until AAAAuuuuddddiiiioooo////TTTToooonnnneeeessss 3 u to select AAAAuuuuddddiiiioooo////TTTToooonnnneeeessss 4 y or z until NNNNaaaammmmeeee TTTToooonnnneeee TTTTaaaagggg 6 y or z until PPPPoooowwwweeeerrrr HHHHiiiigggghhhh????
or MMMMssssgggg TTTToooonnnneeee TTTTaaaagggg or until PPPPoooowwwweeeerrrr LLLLoooowwww????
7 u to conrm the selection. NAME AND CALL/MESSAGE TONE TAGGING You can program your radio to sound a particular alert tone when:
a specic user is callingname tone tagging, or a message is being sent to your radio, or your radio is receiving a type of radio call call tone tagging. There are seven alert tones to select from. 5 u to select NNNNaaaammmmeeee TTTToooonnnneeee TTTTaaaagggg or MMMMssssgggg TTTToooonnnneeee TTTTaaaagggg 6 y or z until you see the name or message you want to tag. 7 u to conrm the selection. 8 y or z until you hear one of the seven tones you want to use for this name or message. 9 u to conrm the selection. You will see or NNNNaaaammmmeeee TTTTaaaagggg SSSSeeeetttt MMMMssssgggg TTTToooonnnneeee TTTTaaaagggg English 22 English.book Page 23 Thursday, August 12, 1999 10:09 AM 10 t to return to NNNNaaaammmmeeee TTTToooonnnneeee TTTTaaaagggg 9 u to conrm the selection. You will see CCCCaaaallllllll TTTToooonnnneeee TTTTaaaagggg 10 t to return to CCCCaaaallllllll TTTToooonnnneeee TTTTaaaagggg or Hold down t to exit Menu Mode. MMMMssssgggg TTTToooonnnneeee TTTTaaaagggg or or Hold down t to exit Menu Mode. To tag a type of radio call:
1 u to enter Menu Mode. 2 y or z until AAAAuuuuddddiiiioooo////TTTToooonnnneeeessss 3 u to select AAAAuuuuddddiiiioooo////TTTToooonnnneeeessss 4 y or z until CCCCaaaallllllll TTTToooonnnneeee TTTTaaaagggg 5 u to select CCCCaaaallllllll TTTToooonnnneeee TTTTaaaagggg 6 y or z until you see the call type you want to tag. 7 u to conrm the selection. 8 y or z until you hear the tone you want to use for this type of call. I R A D O C A L L S 23 English English.book Page 24 Thursday, August 12, 1999 10:09 AM Notes S L L A C O D A R I English 24 English.book Page 25 Thursday, August 12, 1999 10:09 AM You can start or stop a scan operation either by:
pressing the preprogrammed Scan button (see page 4) to start or stop scanning;
or 1 ) to enter Menu Mode. 2 y or z until SSSSyyyysssstttteeeemmmm SSSSccccaaaannnn 3 ) to select SSSSyyyysssstttteeeemmmm SSSSccccaaaannnn 4 y or z until SSSSyyyyssss SSSSccccaaaannnn OOOOnnnn????
or SSSSyyyyssss SSSSccccaaaannnn OOOOffffffff????
5 ) to conrm your selection. S C A N SCAN Your radio can monitor multiple channels in a scan list. Your dealer can program up to 16 different channels into each scan list. When your radio detects activity on a scan list channel, it will automatically switch to that channel. Note: The same channels can be assigned to different scan lists. STARTING OR STOPPING SCAN G The Gsymbol, and the number of the channel you are transmitting on, will appear on the display when you start a scan operation. The green LED indicator blinks during a scan operation and stops blinking when the radio switches to a channel. Note: If you enter Menu Mode while the radio is scanning, scanning will stop. It will resume when you exit Menu Mode. 25 English English.book Page 26 Thursday, August 12, 1999 10:09 AM N A C S TALKBACK The Talkback feature allows you to respond to a transmission while scanning. If a transmission on a channel is detected while scanning, the radio will stop on that channel for a preprogrammed period of time. During this hangtime you may respond by pressing the PTT. Note: If transmission stops/ceases or if the PTT is not pressed for a preprogrammed duration, the radio will continue scanning. Also, the LED scan indicator stops blinking while the radio is in hangtime. DELETING A NUISANCE CHANNEL If a channel continually generates unwanted calls or noise (a nuisance channel), use the Scan button to temporarily delete the channel from the scan list. Note: You cannot delete a priority channel (see page 28) or the last remaining channel in a scan list. 1 While the radio is on the nuisance channel, hold down the Scan button until you hear a tone. 2 Release the Scan button. The nuisance channel is deleted. Restoring a Channel to the Scan List To restore a previously deleted channel to the scan list, restart the scan operation or turn your radio off and on again. EDITING A SCAN LIST A scan list is a group of up to 16 channels. Each channel can have a scan list assigned to it. The same channel can be included in several scan lists, and the same scan list can be assigned to several Channel Selector positions. For example:
Position 2 Position 14 C h a n n e l s 1 3 5 6 1 2 3 11 When you edit a scan list, you can either add, delete, or prioritize channels. The K symbol will appear on the display while you are in edit mode. Note: Your radio cannot receive any calls while you are editing a scan list. English 26 English.book Page 27 Thursday, August 12, 1999 10:09 AM Adding or Deleting Channels in a Scan List To add or delete channels in a scan list:
1 ) to enter Menu Mode. 2 y or z until PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 3 ) to select PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 4 y or z until SSSSccccaaaannnn LLLLiiiisssstttt 5 ) to select SSSSccccaaaannnn LLLLiiiisssstttt 6 y or z until AAAAdddddddd EEEEnnnnttttrrrryyyy????
or until DDDDeeeelllleeeetttteeee EEEEnnnnttttrrrryyyy????
7 ) to conrm your selection. 8 y or z until you see the channel you want to add or delete. Note: You cannot delete the last remaining channel in a scan list. 9 ) to conrm your selection. 10 If you added a channel, EEEEnnnnttttrrrryyyy SSSSaaaavvvveeeedddd you will see or If you deleted a channel, you will see
) to conrm the deletion. You will see DDDDeeeelllleeeetttteeee????
EEEEnnnnttttrrrryyyy DDDDeeeelllleeeetttteeeedddd 11 ( to return to AAAAdddddddd EEEEnnnnttttrrrryyyy????
or to return to or Hold down ( to exit Menu Mode. DDDDeeeelllleeeetttteeee EEEEnnnnttttrrrryyyy????
S C A N 27 English English.book Page 28 Thursday, August 12, 1999 10:09 AM Prioritizing a Channel in a Scan List Setting Priority Channels You may want to check the activity on one or two channels more frequently than others. You can do this by assigning them priority:
Note: Even if there may be activity on a non-
priority channel, your radio will automatically switch to an active priority channel and indicate the activity with a short tone. N A C S Priority Channel Scanning Sequence None specied Ch1 Ch2 Ch3 Ch4 Ch1 Channel 2
(Priority 1) Channel 2
(Priority 1) Channel 8
(Priority 2) Ch2 Ch1 Ch2 Ch3 Ch2 Ch4 Ch2 Ch1 Ch2 Ch1 Ch8 Ch3 Ch2 Ch4 Ch8 Ch1 Note: You cannot reprioritize a Priority 1 channel to Priority 2. 1 ) to enter Menu Mode. 2 y or z until PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 3 ) to select PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 4 y or z until SSSSccccaaaannnn LLLLiiiisssstttt 5 ) to select SSSSccccaaaannnn LLLLiiiisssstttt 6 y or z until EEEEddddiiiitttt PPPPrrrriiiioooorrrriiiittttyyyy????
7 ) to select EEEEddddiiiitttt PPPPrrrriiiioooorrrriiiittttyyyy????
8 y or z until PPPPrrrriiiioooorrrriiiittttyyyy ####1111????
or until PPPPrrrriiiioooorrrriiiittttyyyy ####2222????
9 ) to select the desired priority level. 10 y or z until you see the channel you want to prioritize. English 28 English.book Page 29 Thursday, August 12, 1999 10:09 AM 11 ) to prioritize that channel. 12 ( to return to EEEEddddiiiitttt PPPPrrrriiiioooorrrriiiittttyyyy????
or Hold down ( to exit Menu Mode. Note: If you want to reprioritize all channels, you must rst delete each priority channel from the scan list, and then add it back. S C A N 29 English English.book Page 30 Thursday, August 12, 1999 10:09 AM Notes N A C S English 30 English.book Page 31 Thursday, August 12, 1999 10:09 AM PHONE If your radio has access to a telephone system, you can make a phone call. To do this, your radio must send an access code to a station that connects it to a phone line. (Ask your dealer for more details.) After completing a call, your radio must send a deaccess code to hang up. MAKING A PHONE CALL D You can make a phone call using the preprogrammed Phone button (see page 4) or the radio menu. The D symbol appears on the display when you are in Phone Mode. To initiate a phone call:
Press the Phone button. or Do the following:
1 Switch to the desired channel. 2 ) to enter Menu Mode. 3 y or z until PPPPhhhhoooonnnneeee 4 ) to select PPPPhhhhoooonnnneeee 5 You will hear a series of tones indicating that an access code is being sent automatically. You will also see your access code displayed;
or when using the keypad microphone only, enter your access code using the keypad. 6 When you hear a dial tone, enter or select a phone number:
when using the keypad microphone only, enter the phone number using the keypad. or y or z to select a number from the phone list. or when using the keypad microphone only, a Press and release the preprogrammed Speed Dial button (see page 5) to use the Speed Dial feature. b Press the key (1 to 8) corresponding to the number you want to call, or press 0 if you want to call the last number dialed. P H O N E 31 English English.book Page 32 Thursday, August 12, 1999 10:09 AM Note: To redial the last number dialed (if not using Speed Dial), do not choose a number. Proceed to step 7. Alternatively, if you entered your access code using the keypad, press z once to access the last number dialed; then press and release the PTT. 7 8 To end a phone call, do one of the following:
If your radio has the deaccess code preprogrammed, proceed to step 8. or Enter the deaccess code using the keypad. Press the Phone button to exit Phone Mode. or
( to exit Phone Mode and return to PPPPhhhhoooonnnneeee or Hold down ( to exit Menu Mode. MODIFYING THE PHONE LIST K You can modify a phone list in one of the following ways:
Add an entry Delete an entry Edit an existing entry Edit an Access/Deaccess code When you are modifying the phone list, the K symbol will appear on the display. Note: Your radio cannot receive any calls while you are modifying the phone list. Adding an Entry (when using the enhanced keypad microphone only) To add an entry:
1 ) to enter Menu Mode. 2 y or z until PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 3 ) to select PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 4 y or z until PPPPhhhhoooonnnneeee LLLLiiiisssstttt 5 ) to select PPPPhhhhoooonnnneeee LLLLiiiisssstttt E N O H P English 32 English.book Page 33 Thursday, August 12, 1999 10:09 AM 6 y or z until AAAAdddddddd EEEEnnnnttttrrrryyyy????
14 ( to return to AAAAdddddddd EEEEnnnnttttrrrryyyy????
7 ) to select AAAAdddddddd EEEEnnnnttttrrrryyyy????
You will see EEEEnnnntttteeeerrrr NNNNaaaammmmeeee 8 Use the keypad to enter the name (see page 7). or Hold down ( to exit Menu Mode. Deleting an Entry To delete an entry:
9 ) to store the name. 1 ) to enter Menu Mode. You will see EEEEnnnntttteeeerrrr PPPPhhhhoooonnnneeee ####
2 y or z until PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 10 Use the keypad to enter the phone number. You can also add a dash (press w) and a Pause Indicator (hold down # until the #
character on the display changes to a P). 11 ) to select the phone number. 12 y or z until you see the location in the list where you want to store the phone number. 3 ) to select PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 4 y or z until PPPPhhhhoooonnnneeee LLLLiiiisssstttt 5 ) to select PPPPhhhhoooonnnneeee LLLLiiiisssstttt 6 y or z until DDDDeeeelllleeeetttteeee EEEEnnnnttttrrrryyyy????
7 ) to select DDDDeeeelllleeeetttteeee EEEEnnnnttttrrrryyyy????
13 ) to store the phone number. 8 y or z until you see the entry you want You will see EEEEnnnnttttrrrryyyy SSSSaaaavvvveeeedddd to delete. P H O N E 33 English English.book Page 34 Thursday, August 12, 1999 10:09 AM 9 ) to select the entry. 8 y or z until you see the entry you want to DDDDeeeelllleeeetttteeee????
You will see
) again to conrm the deletion. You will see EEEEnnnnttttrrrryyyy DDDDeeeelllleeeetttteeeedddd 10 ( to return to DDDDeeeelllleeeetttteeee EEEEnnnnttttrrrryyyy????
or Hold down ( to exit Menu Mode. Editing an Entry (when using the enhanced keypad microphone only) To edit an entry:
1 ) to enter Menu Mode. 2 y or z until PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss edit. 9 ) to select the entry. EEEEddddiiiitttt NNNNaaaammmmeeee????
10 y or z until to edit the name, or until to edit the phone number, or until to edit the location in the phone list. EEEEddddiiiitttt NNNNuuuummmmbbbbeeeerrrr????
EEEEddddiiiitttt LLLLooooccccaaaattttiiiioooonnnn????
11 ) to conrm your selection. 12 Use the keypad to edit the entry (see page 7). or y or z until you see the location where you want to store the phone number. E N O H P 3 ) to select PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 13 ) to store the information. 4 y or z until PPPPhhhhoooonnnneeee LLLLiiiisssstttt 14 ( to return to EEEEddddiiiitttt EEEEnnnnttttrrrryyyy????
5 ) to select PPPPhhhhoooonnnneeee LLLLiiiisssstttt 6 y or z until EEEEddddiiiitttt EEEEnnnnttttrrrryyyy????
7 ) to select EEEEddddiiiitttt EEEEnnnnttttrrrryyyy????
or Hold down ( to exit Menu Mode. English 34 10 y or z to edit another code. or Hold down ( to exit Menu Mode. English.book Page 35 Thursday, August 12, 1999 10:09 AM Editing an Access/Deaccess Code (when using the enhanced keypad microphone only) To edit an access/deaccess code:
1 ) to enter Menu Mode. 2 y or z until PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 3 ) to select PPPPrrrrooooggggrrrraaaammmm LLLLiiiissssttttssss 4 y or z until EEEEddddiiiitttt CCCCooooddddeeeessss????
5 ) to select EEEEddddiiiitttt CCCCooooddddeeeessss????
6 y or z until AAAAcccccccceeeessssssss CCCCooooddddeeee????
or until DDDDeeeeaaaacccccccceeeessssssss CCCCooooddddeeee????
7 ) to select AAAAcccccccceeeessssssss CCCCooooddddeeee????
or DDDDeeeeaaaacccccccceeeessssssss CCCCooooddddeeee????
8 Enter the number using the enhanced keypad microphone. 9 ) to select the entry. P H O N E 35 English English.book Page 36 Thursday, August 12, 1999 10:09 AM Notes E N O H P English 36 English.book Page 37 Thursday, August 12, 1999 10:09 AM AUDIO/TONE SETTINGS You can customize the audio and tone feature settings on your radio. 1 ) to enter Menu Mode. 2 y or z until AAAAuuuuddddiiiioooo////TTTToooonnnneeeessss 3 ) to select AAAAuuuuddddiiiioooo////TTTToooonnnneeeessss 4 y or z until you see the feature you want to change. (Refer to the table below.) 5 ) to select the feature. You will see the features current setting. 6 y or z for available settings. (Refer to the table below.) 7 ) to select the desired setting. Audio/Tone Settings Feature Alert Vol Lvl What it Does Settings Allows the volume level of the audio and the volume level of the alert tones to be set independently. Ind Alert Off Ind Alert On Tone Disable Turns all tones on or off. Tones On Tones Off S E T T N G S I I A U D O T O N E
37 English
E N O T O D U A I I S G N T T E S English.book Page 38 Thursday, August 12, 1999 10:09 AM Audio/Tone Settings Feature Name Tone Tag Call Tone Tag Msg Tone Tag Escalert What it Does Settings Assigns a specic tone to all calls from a specic user
(see page 22 for details). Standard Alert #1 #7 Assigns a specic tone when receiving a specic type of radio call (see page 23 for details). Standard Alert #1 #7 Assigns a specic tone when receiving a specic message (see page 22 for details). Standard Alert #1 #7 Gradually increases the volume of the alarm tones when a call is not answered. Escalert On Escalert Off Companding
(XPand) Approximates the same audio quality for 12.5kHz channels to that of 25kHz channels. Keypad Tones Turns keypad tones on or off. Compand On Compand Off Tones On Tones Off English 38 English.book Page 39 Thursday, August 12, 1999 10:09 AM UTILITIES You can customize some of your radios features by:
1 ) to enter Menu Mode. 2 y or z until UUUUttttiiiilllliiiittttiiiieeeessss 3 ) to select UUUUttttiiiilllliiiittttiiiieeeessss 4 y or z until you see the feature you want to change (see table below). 5 ) to select the feature. You will see the features current setting. 6 y or z for available settings. 7 ) to select the desired setting. Utilities Features What it Does Changes the power level of the radio to high or low (see page 21). Sets the time (see page 41). Sets the alarm and turns it on or off (see page 41). Feature Power Level Clock Reminder Alarm Settings Power High Power Low Set Time Display Clock Alarm On Alarm Off Set Time I I U T L T E S I 39 English English.book Page 40 Thursday, August 12, 1999 10:09 AM Utilities Features What it Does Allows you to select the language displayed on the display. Activates/deactivates the option board installed in your radio. Displays the radios software version number. Feature Language Selection Option board Software Ver #
Settings English Spanish Portuguese French Opt Board On Opt Board Off I S E T L T U I I English 40 English.book Page 41 Thursday, August 12, 1999 10:09 AM SETTING THE TIME To set the time:
1 ) to enter Menu Mode. 2 y or z until UUUUttttiiiilllliiiittttiiiieeeessss 3 ) to select UUUUttttiiiilllliiiittttiiiieeeessss 4 y or z until CCCClllloooocccckkkk 8 When a setting (e.g., hour) is blinking, you can change it with y or z. Hour
(AM or PM) 3:05 PM Minutes
(AM/PM or 24 hr) 9 w to proceed to the next setting (e.g., from hour to minutes). or until RRRReeeemmmmiiiinnnnddddeeeerrrr AAAAllllaaaarrrrmmmm 10 ) to save your changes. Note: You must access the clock menu to select AM/PM or 24 hr. This selection cannot be made from Reminder Alarm menu. 5 ) to conrm your selection. 6 y or z until SSSSeeeetttt TTTTiiiimmmmeeee????
7 ) to select SSSSeeeetttt TTTTiiiimmmmeeee????
11 ( to return to CCCClllloooocccckkkk or to return to or Hold down ( to exit Menu Mode. RRRReeeemmmmiiiinnnnddddeeeerrrr AAAAllllaaaarrrrmmmm I I U T L T E S I 41 English English.book Page 42 Thursday, August 12, 1999 10:09 AM DISPLAYING THE TIME To display the time:
1 ) to enter Menu Mode. 2 y or z until UUUUttttiiiilllliiiittttiiiieeeessss 3 ) to select UUUUttttiiiilllliiiittttiiiieeeessss 4 y or z until CCCClllloooocccckkkk 5 ) to conrm your selection. 6 y or z until DDDDiiiissssppppllllaaaayyyy CCCClllloooocccckkkk????
7 ) to select DDDDiiiissssppppllllaaaayyyy CCCClllloooocccckkkk????
The radio will display the time for a preprogrammed duration. 8 ( to exit the menu. SELECTING THE DISPLAY LANGUAGE To select the display language:
1 ) to enter Menu Mode. 2 y or z until UUUUttttiiiilllliiiittttiiiieeeessss 3 ) to select UUUUttttiiiilllliiiittttiiiieeeessss 4 y or z until LLLLaaaannnngggguuuuaaaaggggeeee SSSSeeeellllcccctttt 5 ) to conrm your selection. 6 y or z until desired language is displayed. 7 ) to select desired language. 8 ( to exit the menu. I S E T L T U I I English 42 English.book Page 43 Thursday, August 12, 1999 10:09 AM SAFETY AND WARRANTY European Committee for Electrotechnical Standardisation (CENELEC):
SAFE AND EFFICIENT OPERATION OF MOTOROLA TWO-WAY RADIOS Exposure to Radio Frequency Energy National and International Standards and Guidelines Your Motorola Two-Way Radio, which generates and radiates radio frequency (RF) electromagnetic energy (EME), is designed to comply with the following National and International Standards and Guidelines regarding exposure of human beings to radio frequency electromagnetic energy:
Federal Communications Commission Report and Order No. FCC 96-326 (August 1996) American National Standards Institute
(C95.1 - 1992) National Council on Radiation Protection and Measurements (NCRP - 1986) International Commission on Non-Ionizing Radiation Protection (ICNRP - 1986) ENV. 50166-
1 1995 E Human Exposure to Electromagnetic Fields Low Frequency (0Hz to 10kHz) ENV. 50166-
2 1995 E Proceedings of SC211/8 1996 Human Exposure to Electromagnetic Fields High Frequency (10kHz to 300GHz) Safety Considerations for Human Exposure to E.M.F.s from Mobile Telecommunications Equipment (M.T.E.) in the Frequency Range 30MHz - 6GHz (E.M.F. -
Electromagnetic Fields) To assure optimal radio performance and that human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:
W A R R A N T Y S A F E T Y A N D 43 English English.book Page 44 Thursday, August 12, 1999 10:09 AM Mobile Radio Operation and EME Exposure Electromagnetic Interference/Compatibility To assure optimal radio performance and that human exposure to radio frequency electromagnetic energy is within the guidelines referenced earlier in this document, transmit only when people inside and outside the vehicle are at least the minimum distance away from a properly installed, externally mounted antenna. Table 1 lists the minimum distance for several different ranges of radiated power. Table 1: Radiated Power and Distance Radiated Power of Vehicle-installed Mobile Two-way Radio Minimum Distance From Transmitting Antenna 7 to 15 Watts 1 Foot (30.5 cm) 16 to 50 Watts 2 Feet (61 cm) More than 50 Watts 3 Feet (91.5 cm) Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise congured for electromagnetic compatibility. To avoid electromagnetic interference and/or compatibility conicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with airline regulations or crew instructions. D N A Y T E F A S Y T N A R R A W English 44 English.book Page 45 Thursday, August 12, 1999 10:09 AM OPERATIONAL WARNINGS Vehicles with an Air Bag
W A R N I N G Do not place a radio in the area over an air bag or in the air bag deployment area. Air bags inate with great force. If a radio is placed in the air bag deployment area and the air bag inates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Turn off your two-way radio when you are in any area with a potentially explosive atmosphere, unless it is a radio type especially qualied for use in such areas (for example, Factory Mutual or CENELEC approved). Sparks in a potentially explosive atmosphere can cause an explosion or re resulting in bodily injury or even death. Blasting Caps and Blasting Areas To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: Turn off two-way radio. Obey all signs and instructions. Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as: below decks on boats; fuel or chemical transfer or storage facilities; areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off a vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. W A R R A N T Y S A F E T Y A N D 45 English English.book Page 46 Thursday, August 12, 1999 10:09 AM MOBILE ANTENNA INSTALLATION Install the vehicle antenna external to the vehicle and in accordance with:
The requirements of the antenna manufacturer/supplier Instructions in the Radio Installation Manual CONTROL STATION OPERATION When radio equipment is used to operate as a control station, it is important that the antenna be installed outside the building and away from places where people may be in close proximity. Note: Refer to Table 1 on page 44 for rated power and minimum distant values for transmitting antennas. D N A Y T E F A S Y T N A R R A W English 46 English.book Page 47 Thursday, August 12, 1999 10:09 AM LIMITED WARRANTY MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
MOTOROLA INC. (MOTOROLA) warrants the MOTOROLA manufactured Communication Products listed below (Product) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:
CDM1550 Mobile Units Product Accessories Two (2) Years One (1) Year Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modications to this warranty unless made in writing and signed by an ofcer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. W A R R A N T Y S A F E T Y A N D 47 English English.book Page 48 Thursday, August 12, 1999 10:09 AM II. GENERAL PROVISIONS:
III. STATE LAW RIGHTS:
This warranty sets forth the full extent of MOTOROLA's responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLAs option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specic legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you rst contact the company which sold you the Product
(e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola at 1-800-927-2744 US/Canada. D N A Y T E F A S Y T N A R R A W English 48 English.book Page 49 Thursday, August 12, 1999 10:09 AM V. WHAT THIS WARRANTY DOES NOT COVER:
A Defects or damage resulting from use of the Product in other than its normal and customary manner. B Defects or damage from misuse, accident, water, or neglect. C Defects or damage from improper testing, operation, maintenance, installation, alteration, modication, or adjustment. D Breakage or damage to antennas unless caused directly by defects in material workmanship. A Product subjected to unauthorized Product modications, disassemblies or repairs
(including, without limitation, the addition to the Product of non-Motorola supplied equipment) which adversely affect performance of the Product or interfere with Motorola's normal warranty inspection and testing of the Product to verify any warranty claim. Product which has had the serial number removed or made illegible. E F G Freight costs to the repair depot. H A Product which, due to illegal or unauthorized alteration of the software/
rmware in the Product, does not function in accordance with MOTOROLAs published specications or the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. Normal and customary wear and tear. I J VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages nally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
A B that MOTOROLA will be notied promptly in writing by such purchaser of any notice of such claim;
that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and W A R R A N T Y S A F E T Y A N D 49 English English.book Page 50 Thursday, August 12, 1999 10:09 AM C should the Product or parts become, or in MOTOROLAs opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modied in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modication, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. VII.GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, USA. D N A Y T E F A S Y T N A R R A W English 50 English.book Page 51 Thursday, August 12, 1999 10:09 AM ACCESSORIES Motorola offers a number of accessories to enhance the productivity of your two-way radio. Many of the available accessories are listed below. For a complete list, see your Motorola dealer. AUDIO RMN4025 RMN4026 RMN4038 RSN4001 HSN8145 Compact Remote Speaker Microphone Enhanced Keypad Microphone Heavy Duty Microphone External Speaker 13W External Speaker 7.5W MOUNTING GLN7324 RLN4780 HLN8097 RLN4779 RLN4782 RKN4077 RKN4078 RKN4079 Low Prole Trunnion High Prole Trunnion Removable Slide Mount Key Lock Mount DIN Mounting Kit (in dash) Remote Mount Cable - 3 m Remote Mount Cable - 5 m Remote Mount Cable - 7 m A C C E S S O R E S I 51 English English.book Page 52 Thursday, August 12, 1999 10:09 AM ANTENNAS CONTROL STATION I S E R O S S E C C A GPN6145 HPN4002 GPN6149 HPN4001 RMN4030 GLN7318 GLN7326 Desktop Power Supply 1-25W (EMC) Desktop Power Supply 1-25W Desktop Power Supply 25-45W (EMC) Desktop Power Supply 25-45W Desktop Microphone Desktop Tray without Speaker Desktop Tray with Speaker Note: A variety of interchangeable buttons are available for use in the P1-P4 locations on your radio (page 1). See your dealer for further details. HAD4006A HAD4007A HAD4008A HAD4009A HAD4014A HAE4002A HAE4003A HAE4010A HAE4011A HAE4019A HAE4004A HAE4012A VHF 136-144 MHz, 1/4 Wave Roof Mount VHF 146-150.8 MHz, 1/4 Wave Roof Mount VHF 150.8-162 MHz, 1/4 Wave Roof Mount VHF 162-174 MHz, 1/4 Wave Roof Mount VHF 146-172 MHz, 3.0dB Gain Roof Mount UHF 403-430 MHz, 1/4 Wave Roof Mount UHF 450-470 MHz, 1/4 Wave Roof Mount UHF 406-420 MHz, 3.5dB Gain Roof Mount UHF 450-470 MHz, 3.5dB Gain Roof Mount UHF 450-470 MHz, 5dB Gain Roof Mount UHF 470-512 MHz, 1/4 Wave Roof Mount UHF 470-494 MHz, 3.5dB Gain Roof Mount 09-02105F01 BNC Connector English 52 English.book Page 53 Thursday, August 12, 1999 10:09 AM Sending a Call 1. Turn radio on and select appropriate zone and channel. 2. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it. 3. Release PTT to listen. Receiving a Call 1. Turn radio on and adjust volume to the desired level. 2. Select desired channel. 3. To respond to an incoming call, press PTT, hold the microphone 1 to 2 inches
(2.5 to 5 cm) from your mouth, and speak clearly into it. Deleting a Nuisance Channel During Scanning 1. While radio is on a nuisance channel, hold down preprogrammed Scan button until you hear a tone. 2. Release Scan button. Making a Phone Call 1. Press Phone button, or select Phone from the menu. 2. 3. Send phone number in one of the following ways:
If access code is not displayed, send access code if required. Press and release PTT to send last dialed number. or when using an enhanced keypad microphone only, press preprogrammed Speed Dial button, followed by a keypad key (18), to access rst nine numbers in your phone list. (Press PTT if buffered dial.) or when using an enhanced keypad microphone only, enter phone number using the keypad. (Press PTT if buffered dial.) 4. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it. Ending a Phone Call 1. Send deaccess code if required. 2. Press preprogrammed Phone button, or press (. Sending and Cancelling an Emergency Alert To activate Emergency Alert., press preprogrammed Emergency button. To cancel, press and hold down Emergency button. CDM1550 Quick Reference Card Record the functions for your radios programmable buttons in the table provided below. For further information, see page 4 of this User Guide. On/Off/Volume Knob Red/Yellow/Green LED Indicators LCD Screen Channel Selector/
Menu Navigation Buttons
(Up/Down) Menu Exit/Escape Button Menu Enter/Select Button Programmable Button 3 (P3)
(Interchangeable) Microphone Jack Programmable Button 1 (P1)
(Interchangeable) Programmable Button 2 (P2)
(Interchangeable) Editing Buttons
(Left/Right) Programmable Button 4 (P4)
(Interchangeable) Button Function Short Press Long Press Hold Down Page
) y z Zone
(p. 12) Message Message Status Utilities
(p. 39) Rptr/
Talkarnd
(p. 21) Audio/
Tones
(p. 37) select/
select/
enter ID enter ID select/
enter ID y z y z y z repeater mode/
talkarnd mode English.book Page 54 Thursday, August 12, 1999 10:09 AM Menu Navigation Chart
(Refer to Menu Navigation guidelines lower, left-hand corner of this page) Program Lists Phone
(p. 31) y z Radio Call
(p. 15) y z Scan List
(p. 26) Phone List
(p. 32) System Scan
(p. 25) y z on/off RadioCall List
(p. 20) edit entry add/delete entry edit priority all/delete/edit entry/edit codes Selective Call Call Alert Radio Check select/
enter ID select/
enter ID select/
enter ID Menu Navigation
) to enter Menu Mode. y or z to scroll through the list.
) to select Menu item.
( to return to previous menu level or Hold down ( to exit Menu Mode. y or z to scroll through sub-list.
) to select sub-menu item. Power Level high/low/
auto Clock display/
set time Reminder Alarm on/off/
set time Language Select select Option Board on/off Light Disable on/off Software Ver #
Alert Vol Lvl on/off Tone Disable on/off Name Tone Tag standard/alert
#1 - #7 Message Tone/Tag standard/alert
#1 - #7 Call Tone Tag standard/alert
#1 - #7 Escalert on/off Companding on/off Keypad Tones on/off contact C A, Motorola, Professional Radio, PRO Series, CDM1550, As Dedicated As You Are, and Call Alert are trademarks of Motorola, Inc.
' 1999 Motorola, Inc. All rights reserved. Printed in U.S.A. A, Motorola, Radio Professionnelle, Srie PRO, CDM1550, Aussi spcial-
ise que vous ltes, et Call Alert sont des marques de Motorola, Inc.
' 1999 Motorola, Inc. Tous droits rservs. Imprim aux tats-Unis.
*6881091C56*
68P81091C56-0 CDM1550 Mobile Radio Radio Mobile contact control User Guide Guide de lusager CDM1550 control e r A u o Y s A d e a c i d e D s A t i o d a R i l a n o s s e o r P f
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-07-27 | 136 ~ 174 | TNB - Licensed Non-Broadcast Station Transmitter | Class II permissive change or modification of presently authorized equipment |
2 | 2000-02-18 | 136 ~ 174 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2007-07-27
|
||||
1 2 |
2000-02-18
|
|||||
1 2 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
1 2 | FCC Registration Number (FRN) |
0003778479
|
||||
1 2 | Physical Address |
8000 West Sunrise Blvd
|
||||
1 2 |
Ft Lauderdale, Florida 33322
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
AZ4
|
||||
1 2 | Equipment Product Code |
92FT3796
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
D******** Z********
|
||||
1 2 | Title |
Regulatory Compliance Manager
|
||||
1 2 | Telephone Number |
95472********
|
||||
1 2 | Fax Number |
--********
|
||||
1 2 |
d******@motorolasolutions.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Motorola Inc
|
||||
1 2 | Name |
M****** R****
|
||||
1 2 | Physical Address |
8000 West Sunrise Blvd
|
||||
1 2 |
Ft. Lauderdale, Florida 33322
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
954-7********
|
||||
1 2 | Fax Number |
954-7********
|
||||
1 2 |
M******@Motorola.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | MOBILE TRANSMITTER | ||||
1 2 | Mobile Transmitter | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | SINGLE CHANNEL MODE. | ||||
1 2 | Single channel mode. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Motorola
|
||||
1 2 | Name |
W**** E******
|
||||
1 2 | Telephone Number |
954-7********
|
||||
1 2 | Fax Number |
954-7********
|
||||
1 2 |
F******@motorolasolutions.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22,74,9 | BC | 136 | 174 | 30 | 2.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
1 | 2 | 22,74,90.21 | BC | 136 | 174 | 30 | 2.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 3 | 22,90,90.21 | BC | 136 | 174 | 30 | 2.5 ppm | 11K0F2D | |||||||||||||||||||||||||||||||||
1 | 4 | 22,74,90.21 | BC | 136 | 174 | 30 | 2.5 ppm | 5K60F2D | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 22,74,9 | BC | 136 | 174 | 30 | 2.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
2 | 2 | 22,74,90.21 | BC | 136 | 174 | 30 | 2.5 ppm | 11K0F3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC