FCC ID: AZ489FT6019 Paging Transmitter

by: Motorola Solutions, Inc. latest update: 2017-12-20 model: 89FT6019

One grant has been issued under this FCC ID on 12/20/2017 (this is one of fifty-six releases in 2017 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked drivers, troubleshooting guides, warrantee terms, instructions, & password defaults.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 12
1 ~ 2017-12-20 12

app s				submitted / available
1	User Manual	Users Manual	pdf	2.13 MiB
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		External Photos	pdf
1		Internal Photos	pdf
1		ID Label/Location Info	pdf
1		ID Label/Location Info	pdf
1		Cover Letter(s)	pdf
1		RF Exposure Info	pdf
1		Test Report	pdf
1		Test Setup Photos	pdf

exhibit
download
text

User Manual

Users Manual

pdf

2.13 MiB

1 CB200-U CB200-M CB200-M User Guide User Guide 2 TABLE OF CONTENTS RF Safety & FCC............................................................................................................................... 4 Safety & Information........................................................................................................................ 5 Electromagnetic Interference Compliance....................................................................................... 6 Industry Canada Compliance............................................................................................................ 7 Computer Software Copyrights........................................................................................................ 8 9 Documentation Copyrights............................................................................................................... Battery Installation............................................................................................................................ 10 Controls Interface ............................................................................................................................ 11 LCD Display........................................................................................................................................ 12 13 LCD Wakeup...................................................................................................................................... Scrolling Menu................................................................................................................................. 14 Frequency Selection.......................................................................................................................... 15 16 Code Selection................................................................................................................................... Message Recording.......................................................................................................................... 17 Message Playback............................................................................................................................ 18 19 Volume Adjusting.............................................................................................................................. TABLE OF CONTENTS 3 LCD Contrast...................................................................................................................................... User Defined Frequencies................................................................................................................. Software Version.............................................................................................................................. Call Cycles......................................................................................................................................... Cycle Delay........................................................................................................................................ Inverted Codes.................................................................................................................................. Changing VHF to MURS................................................................................................................... RF Busy Delay.................................................................................................................................... Mounting the Device........................................................................................................................ Frequency Tables - UHF ................................................................................................................... Frequency Tables - VHF.................................................................................................................... Frequency Tables - MURS................................................................................................................ CTCSS Code Tables........................................................................................................................... Notes................................................................................................................................................. 20 21 22 23 24 25 26 27 28-29 30-31 32 33 34-36 37-39 4 RF SAFETY & FCC COMPLIANCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Howev er, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Observe a minimum safe distance of 20 cm from the device to the operator. Federal Communications Commision 445 12th Street, SW Washington, DC 20554 1-888-225-5322 (1-888-CALL FCC) Voice: toll free 1-888-835-5322 (1-888-TELL FCC) TTY: toll free SAFETY & INFORMATION 5 The CB200 requires care in mounting and servicing. Observing the following precautions will ensure the proper function and safety of the unit. CAUTION!

Do not screw through the device to mount to a surface. Keep the Callbox away from water, high moisture, and high temperatures. This equipment contains potentially hazardous voltages. Do not attempt to disassemble the unit. Except for the batteries, this unit contains absolutely no user serviceable components and all service should be completed only by qualified service personnel. Do not dispose of batteries in fire. The batteries may explode. Do not open or mutilate the batteries, they contain dangerous electrolytes. Operating this unit in any capacity other than its intended purpose may result in system failure and possible injury and voids any and all warranty. 6 EMI COMPATIBILITY ELECTROMAGNETIC INTERFERENCE (EMI) COMPLIANCE NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. This device complies with part 15 of the FCC Rules and Industry Canada License-exempt RSS standard(s). Operation is subject to the following conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

(3) Changes or modifications made to this device, not expressly approved by Motorola, could void the authority of the user to operate this equipment. INDUSTRY CANADA COMPLIANCE 7 Industry Canada (IC) statement (Canada) / Dclaration de Canada dindustrie (IC) (Canada) IC RF Exposure Statement / Dclaration dexposition dIC RF This device meets the IC requirements for RF exposure in public or uncontrolled environments. Cet appareil est conforme aux conditions de la IC en matire de RF dans des environnements publics ou incontrle. IC Warning / Avertissement dIC This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise Les deux conditions suivantes: 1. cet appareil ne peut pas provoquer dinterfrences et 2. cet appareil doit accepter Toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement du dispositive. COMPUTER SOFTWARE COPYRIGHTS 8 The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola Solutions products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola Solutions. Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal nonexclusive license to use that arises by operation of law in the sale of a product. DOCUMENTATION COPYRIGHTS 9 No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola Solutions. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola Solutions. DISCLAIMER The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola Solutions reserves the right to make changes to any products herein to improve readability, function, or design. Motorola Solutions does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others. 10 INSTALLING THE BATTERIES BATTERY HOLDER

COPPER CONTACT

The CB200 uses six (6) AA batteries. 1. Remove the battery holder from cardboard packaging. 2. Orient the battery holder with the four copper contacts pointed towards you. 3. Insert the batteries following battery sled sticker. 4. Insert battery holder into bottom of device with the four contacts first. 5. Replace the battery holder cover. BATTERY HOLDER BATTERY HOLDER COVER CONTROL INTERFACE 11 Available Controls and Components 1. Menu Button 2. Enter Button 3. Esc Button 4. Display 5. Microphone 6. Wake Up Button 7. Call Button 12 LCD DISPLAY Initial Power-Up Once the batteries are installed in the unit, the Call Button blinks and LCD display shows Interface ENA. If the USB Serial Interface is not to be used, press the ESC button to exit this mode. The default status screen will be shown on the display. If nothing is pressed, the unit will enter sleep mode after 60 seconds and the screen will clear. Status Screen The Status Screen toggles the current Frequency and CTCSS setting continuously. CB200-U CB200-M Insert Battery Insert Battery INTERFACE ENA

-ESC to EXIT-

INTERFACE ENA

-ESC to EXIT-

Press Esc Press Esc Freq No: 6 MHZ:467.8750 Freq No: 6 MHZ:151.6250 CTCSS CODE: 1 67.0 HZ ANA Channel Spacing 12.5 KHZ CTCSS CODE: 1 67.0 HZ ANA LCD WAKEUP 13 The screen is in a blank sleep state during most operation, even when the system is operating. This is a feature to increase battery life and prevent tampering. To enter the Menu options, press the Wakeup button on the unit. The large round button blinks to indicate it is awake. The display remains disabled until any LCD menu control button is pressed. The LCD menu control buttons are Up or Down as shown in the following. 14 SCROLLING MENU You can setup preferred features on CB200 by scrolling through the menu options. Press the Menu buttons to scroll through menus. Menu options are presented in the order below, and the list repeats continuously. UHF v Set Radio Frequency Set Radio Code Message Record Message Playback Volume Adjust LCD Contrast User Defined Frequency Software Version Call Cycles Cycle Delay RF Busy Delay VHF v Set Radio Frequency Set Radio Code Message Record Message Playback Volume Adjust LCD Contrast User Defined Frequency Software Version Call Cycles Cycle Delay Inverted Codes MURS or VHF RF Busy Delay RADIO FREQUENCY SELECTION 15 Set Radio Frequency When the unit is awake and displaying the Status Screen, press the UP or Down Menu buttons until Radio Freq? appears. Press Enter Press Up or Down to select new frequency Press Enter to select new frequency Press Enter to select new frequency The CB200 is now programmed with the new frequency selected. 16 RADIO CODE SELECTION Set Code Frequency When the unit is awake and displaying the Status Screen, press the UP or Down Menu buttons until Radio Code? appears. Radio Code?

Press Enter Old:12 100.0 Hz New:12 100.0 Hz Press Up or Down to select new code Old:12 100.0 Hz New:13 103.5 Hz Press Enter to select new code Old:12 100.Hz

**Code Updated Press Enter to select new code The CB200 is now programmed with the new CTCSS code. MESSAGE RECORDING 17 Press Up or Down button until Msg Record? appears. Msg Record?

Press Enter Select Message?

Aux Message Press Up or Down to find message to record. Select Message?

Local Message Press Enter to select mes-

sage to record. Hold ENTER Btn To Record Msg Hold Enter button to record a new message. The new message automatically playback to verify it was recorded correctly. Message cannot be longer than 10 seconds. 18 MESSAGE PLAYBACK Press Up or Down button until Msg Playback? appears. Msg Playback?

Press Enter Select Message?

Local Message Press Up or Down to find message to playback. Select Message?

Radio Message Press Enter to select message to playback.

-Playback Act-

Radio Message Select new message to playback or press Esc to exit. VOLUME ADJUSTMENT 19 Press Up or Down button until Volume Adjust? appears. Volume Adjust?

Press Enter Speaker Volume?

Press Up or Down to select which volume to adjust, then press Enter.

-Speaker Vol-

Vol(1-63): 45 Press Up or Down until desired volume selection is shown. The volume settings take place immediately. Press Esc to exit. 20 LCD CONTRAST Press Up or Down button until LCD Contrast? appears. LCD Contrast?

-LCD Contrast-

(0-15): 0 Press Enter Press Up or Down until desired contrast selection is shown. The contrast settings take place immediately. Press Esc to exit. If the need arises to adjust the LCD contrast, check the batteries first. The batteries may be too weak to operate the unit correctly. USER DEFINED FREQUENCIES 21 If the radios you are using are set to frequencies not listed in our predefined set, you can reset them in this area. There are placeholders for 5 channels, UHF 57-61 ( VHF 6-10 ) ( Not Available in MURs ) Press Up or Down button until User Def Freq? appears. User Def Freq?

Mem Location?

(57-61):57 57 Old:467.8750 New:467.8750 Press Enter Press Up or Down to select which memory location to define. Press Up or Down to select new frequency. Press Enter. Press Esc to exit without any changes. Press and hold Up or Down button for faster increments in the frequency change. 22 SOFTWARE VERSION You may be asked by a field support or technical support personnel to determine the CB200 devices software version. Press Up or Down button until Software Ver? appears. Press Enter The software version is shown CALL CYCLES 23 Call Cycles refers to the repeating radio broadcasts that will occur when the call button is active. Press Up or Down button until Call Cycles? appears. Call Cycles?

Press Enter Old: 2 cycles New: 2 cycles Press Up or Down to increase or decrease the Call Cycle selection. The range is 1-30 cycles. Press Enter to select the new Call Cycle. 24 CYCLE DELAY Call Delay refers to the delay (in seconds) between repeating radio broadcasts that occur when the call button (or aux button) is active. Press Up or Down button until Cycle Delay? appears. Cycle Delay?

Press Enter Old: 45 sec New: 45 sec Press Up or Down to increase or decrease the Cycle Delay selection. The range is 10-180 seconds. Press Enter to select the new Call Cycle. INVERTED CODES 25 When selecting digital CTCSS (squelch) codes, some receiving units may require inverted Octal numeric codes. Typically, receivers use the non-inverted codes. CB200-M is set to non-inverted by default. Note: This feature only applicable for CB200-M Press Up or Down button until Inverted Codes? appears. Press Enter Press Up or Down to select between NORMAL and INVERTED. Press Enter to select the new setting. WARNING: If the incorrect digital code is selected, the radio broadcast will not open the squelch of the receiving unit. 26 CHANGING VHF TO MURS The CB200-M can change between VHf channel set and MURs Channel Set. Note: This feature only applicable for CB200-M Press Up or Down button until MURs or VHF? appears. Press Enter Press Up or Down to cycle through MURS Only and VHF selections. Press Enter to select the new value or Esc to exit without any changes. RF BUSY DELAY 27 RF Busy Delay defines the amount of time after the CB200 recognizes an open channel before it makes its radio transmission. This is helpful if you would like to set a longer time between button press and radio message or to prevent transmitting while conversations are ongoing in some environments. Press Up or Down button until RF Busy Delay? appears. Press Enter Use the Up or Down to cycle through the RF Busy Delay selections (3-15 seconds). Press Enter to select the new value, or Esc to exit without any changes. Default setting is 3-seconds. 28 MOUNTING THE DEVICE The CB200 can be mouted to the wall using the included 3M DualLock strips or by using the optional wall mounting bracket. Using 3M DualLock Ensure both the back of the callbox and the area of the surface that is being attached to is clean, flat, and dry. 1. Peel off one side of the DualLocks release backing and firmly adhere to the left side of the unit. Repeat this with the other DualLock to the right side of the callbox. 2. Once both strips of DualLock are attached to the callbox, peel off the white release backing and carefully align the unit to be level on the surface you intend to place it. MOUNTING THE DEVICE 29 3. Once the callbox appears aligned, firmly press it to the wall in one motion. Note: The callbox is now removable by applying firm pressure around the exterior edge of the unit. For optional mounting accessories, please use the mounting bracket available from your Motorola CB200 distributor. 30 FREQUENCY SELECTION TABLE - UHF Freq. No. 1 Freq. Value

(MHz) 464.5000 Freq. No. 13 Freq. Value

(MHz) 461.1375 Freq. No. 25 Freq. Value

(MHz) 462.8125 2 3 4 5 6 7 8 9 10 11 12 464.5500 467.7625 467.8125 467.8500 467.8750 467.9000 467.9250 461.0375 461.6025 461.0875 461.1125 14 15 16 17 18 19 20 21 22 23 24 461.1625 461.1875 461.2125 461.2375 461.2625 461.2875 461.3125 461.3375 461.3625 462.7625 462.7875 26 27 28 29 30 31 32 33 34 35 36 462.8375 462.8625 462.8875 462.9125 464.4875 464.4875 464.5375 464.5625 466.0375 466.0625 466.0875 FREQUENCY SELECTION TABLE - UHF 31 Freq. No. 37 Freq. Value

(MHz) 466.1125 38 39 40 41 42 43 44 45 46 47 48 466.1625 466.1625 466.1875 466.2125 466.2375 466.2625 466.2875 466.3125 466.3375 466.3625 467.7875 Freq. No. 49 50 51 52 53 54 55 56 57 58 59 60 Freq. Value

(MHz) 467.8375 Freq. No. 61 Freq. Value

(MHz) User Defined 467.8625 467.8875 467.9125 469.4875 469.5125 469.5375 469.5625 User Defined User Defined User Defined User Defined 32 FREQUENCY SELECTION TABLE - VHF Freq. No. 1 Freq. Value

(MHz) 151.8200 2 3 4 5 6 7 8 9 10 151.8800 151.9400 154.5700 154.6000 154.6000 154.6000 154.6000 154.6000 154.6000 Description Default Freq Default Freq Default Freq Default Freq Default Freq Custom Freq 1 Custom Freq 2 Custom Freq 3 Custom Freq 4 Custom Freq 5 FREQUENCY SELECTION TABLE - MURS 33 Freq. No. Freq. Value 1 2 3 4 5 6 7 154.5700 154.6000 151.8200 151.8800 151.9400 154.5700 154.6000 Bandwidth

(KHz) 20 KHz 20 KHz 11.25 KHz 11.25 KHz 11.25 KHz 20 KHz 20 KHz Description Default Freq Default Freq Default Freq Default Freq Default Freq Default Freq Default Freq 34 CTCSS CHART (ANALOG) No. 37 38 Code Hz 241.8 250.3 No. Code Hz No. Code Hz No. Code Hz 1 2 3 4 5 6 7 8 9 10 11 12 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 13 14 15 16 17 18 19 20 21 22 23 24 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 25 26 27 28 29 30 31 32 33 34 35 36 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 CTCSS CHART (DIGITAL) 35 No. Code No. Code No. Code No. Code 39 40 41 42 43 44 45 46 47 48 49 50 023 025 026 031 032 043 047 051 054 065 071 072 51 52 53 54 55 56 57 58 59 60 61 62 073 074 117 115 116 125 131 132 134 143 152 155 63 64 65 66 67 68 69 70 71 72 73 74 156 162 165 172 174 205 223 226 243 244 245 251 75 76 77 78 79 80 81 82 83 84 85 86 261 263 265 271 306 311 315 331 343 346 351 364 36 CTCSS CHART (DIGITAL) No. Code No. Code No. Code 87 88 89 90 91 92 93 94 95 96 97 98 365 371 411 412 413 423 431 432 445 464 465 466 99 100 101 102 103 104 105 106 107 108 109 110 503 506 516 532 546 565 606 612 624 627 631 632 111 112 113 114 115 116 117 118 119 120 121 654 662 664 703 712 723 731 732 734 743 754 NOTES 37 38 NOTES NOTES 39 Printed in USA 112217

		frequency	equipment class	purpose
1	2017-12-20	452 ~ 470	TNB - Licensed Non-Broadcast Station Transmitter	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2017-12-20
1	Applicant's complete, legal business name	Motorola Solutions, Inc.
1	FCC Registration Number (FRN)	0003778479
1	Physical Address	8000 West Sunrise Blvd
1		Ft Lauderdale, Florida 33322
1		United States

app s	TCB Information
1	TCB Application Email Address	v******@tuvam.com
1	TCB Scope	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)

app s	FCC ID
1	Grantee Code	AZ4
1	Equipment Product Code	89FT6019

app s	Person at the applicant's address to receive grant or for contact
1	Name	D****** Z******
1	Title	Regulatory Compliance Manager
1	Telephone Number	95472********
1	Fax Number	--********
1	E-mail	d******@motorolasolutions.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	TNB - Licensed Non-Broadcast Station Transmitter
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Paging Transmitter
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Does not apply
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	Professional Testing (EMI), Inc.
1	Name	L**** F****
1	Telephone Number	512-2******** Extension:
1	Fax Number	512-2********
1	E-mail	l******@ptitest.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	9	EF	452	470	0.324	925 Hz	16K0F3E
1	2	9	EF	452	470	0.324	925 Hz	11K0F3E

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2AC8UA2427 Anhui Huami Information Technology Co.,Ltd. PD9BE201D2 Intel Corporation 2A8QGINT-2600CO Innoteco Inc. PD9BE201D2 Intel Corporation 2AN3BA001-029 CUBTEK INC.