all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
Manual | Users Manual | 4.37 MiB | ||||
1 2 3 4 |
|
RF Safety Manual | Users Manual | 3.00 MiB | ||||
1 2 3 4 | Cover Letter(s) | October 08 2015 | ||||||
1 2 3 4 | Cover Letter(s) | October 08 2015 | ||||||
1 2 3 4 | RF Exposure Info | October 08 2015 | ||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Attestation Statements | |||||||
1 2 3 4 | Test Setup Photos |
1 2 3 4 | Manual | Users Manual | 4.37 MiB |
NAG-LACR.book Page i Tuesday, March 12, 2013 3:37 PM M MOTOTRBO XPRTM 7150 Non-Display Portable User Guide 68009677001-A draft NAG-LACR.book Page ii Tuesday, March 12, 2013 3:37 PM draft NAG-LACR.book Page i Tuesday, March 12, 2013 3:37 PM Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product:
Model Name: XPR 7150 conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. D e c l a r a t i o n o f C o n f o r m i t y i English draft NAG-LACR.book Page ii Tuesday, March 12, 2013 3:37 PM Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. y t i m r o f n o C f o n o i t a r a l c e D ii English draft NAG-LACR.book Page iii Tuesday, March 12, 2013 3:37 PM Contents This User Guide contains all the information you need to use the MOTOTRBO XPR 7150 Digital Portable Radio. Declaration of Conformity . i Important Safety Information . vi Product Safety and RF Exposure Compliance . vi Firmware Version . vi Computer Software Copyrights . vii Handling Precautions . viii Getting Started . 1 How to Use This Guide . 1 What Your Dealer/System Administrator Can Tell You . 1 Preparing Your Radio for Use . 2 Charging the Battery . 2 Attaching the Battery . 3 Attaching the Antenna . 3 Attaching the Universal Connector Cover (Dust Cover) 4 Attaching the Accessory Connector . 4 Powering Up the Radio . 5 Adjusting the Volume . 5 C o n t e n t s Identifying Radio Controls . 6 Radio Controls . 7 Programmable Buttons . 8 Assignable Radio Functions . 8 Assignable Settings or Utility Functions . 9 Push-To-Talk (PTT) Button . 9 Switching Between Conventional Analog and Digital Mode . 10 IP Site Connect . 10 Capacity Plus . 12 Linked Capacity Plus . 12 Identifying Status Indicators . 15 LED Indicator . 15 Audio Tones . 16 Indicator Tones . 17 Receiving and Making Calls . 18 Selecting a Channel . 18 Receiving and Responding to a Radio Call . 19 Receiving and Responding to a Group Call . 19 Receiving and Responding to a Private Call . 20 Receiving an All Call . 21 Receiving and Responding to a Phone Call . 22 Phone Call as a Private Call or Group Call . 22 Phone Call as an All Call . 22 iii English draft NAG-LACR.book Page iv Tuesday, March 12, 2013 3:37 PM Making a Radio Call . 23 Making a Call with the Channel Selector Knob . 23 Making a Group Call . 23 Making a Private Call . 24 Making a Selective Call . 25 Making an All Call . 25 Making a Phone Call with the Programmable Phone Button . 26 Stopping a Radio Call . 26 Talkaround . 27 Monitoring Features . 27 Monitoring a Channel . 27 Permanent Monitor . 28 Advanced Features . 29 Scan Lists . 29 Scan . 30 Starting and Stopping Scan . 30 Responding to a Transmission During a Scan . 30 Deleting a Nuisance Channel . 31 Restoring a Nuisance Channel . 31 Vote Scan . 31 Call Indicator Settings . 32 Escalating Alarm Tone Volume . 32 Call Alert Operation . 32 Receiving and Responding to a Call Alert . 32 s t n e t n o C iv English Making a Call Alert with the One Touch Access Button 32 Emergency Operation . 33 Sending an Emergency Alarm . 33 Sending an Emergency Alarm with Call . 34 Sending an Emergency Alarm with Voice to Follow . 35 Reinitiating an Emergency Mode . 36 Exiting an Emergency Mode . 36 Privacy . 36 Multi-Site Controls . 37 Starting an Automatic Site Search . 37 Stopping an Automatic Site Search . 37 Starting a Manual Site Search . 38 Lone Worker . 38 Password Lock Features . 38 Accessing the Radio from Password . 38 Unlocking the Radio from Locked State . 39 Bluetooth . 40 Finding and Connecting to a Bluetooth Device . 40 Disconnecting from a Bluetooth Device . 41 Switching Audio Route . 41 Auto-Range Transponder System (ARTS) . 41 Over-the-Air Programming (OTAP) . 42 Utilities . 42 draft NAG-LACR.book Page v Tuesday, March 12, 2013 3:37 PM Setting the Squelch Level . 42 Setting the Power Level . 42 Turning the Voice Operating Transmission (VOX) Feature On or Off . 43 Turning the Howling Suppressor Feature On or Off 43 Turning Radio Tones/Alerts On or Off . 43 Checking the Battery Strength . 44 Accessories . 45 Antennas . 45 Batteries . 45 Cables . 45 Carry Devices . 45 Chargers . 45 Earbuds and Earpieces . 46 Headsets and Headset Accessories . 47 Remote Speaker s . 47 Surveillance Accessories . 48 Miscellaneous Accessories . 48 Appendix: Maritime Radio Use in the VHF Frequency Range . 49 Special Channel Assignments . 49 Emergency Channel . 49 Non-Commercial Call Channel . 50 Operating Frequency Requirements . 50 Declaration of Compliance for the Use of Distress and Safety Frequencies . 52 Technical Parameters for Interfacing External Data Sources . 52 Batteries and Chargers Warranty . 53 Limited Warranty . 54 C o n t e n t s v English draft NAG-LACR.book Page vi Tuesday, March 12, 2013 3:37 PM Important Safety Information Product Safety and RF Exposure Compliance Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the XPR 7150 SeriesPortable Radio Regulatory Compliance and Product Safety / Quick Reference Guide (Motorola Publication part number 68009511001) to ensure compliance with RF energy exposure limits. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following website:
http://www.motorolasolutions.com n o i t a m r o f n I y t e f a S t n a t r o p m I Any modification to this device, not expressly authorized by Motorola, may void the users authority to operate this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with Motorola-approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Firmware Version All the features described in the following sections are supported by the radio's software version R02.06.10. Check with your dealer or system administrator for more details for all the features supported. vi English draft NAG-LACR.book Page vii Tuesday, March 12, 2013 3:37 PM Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. The AMBE+2TM voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,
#5,701,390, #5,715,365, #5,649,050, #5,630,011,
#5,581,656, #5,517,511, #5,491,772, #5,247,579,
#5,226,084 and #5,195,166. C o m p u t e r S o f t w a r e C o p y r i g h t s vii English draft maximum limit or use without antenna may result in damage to the radio. When cleaning the radio, do not use a high pressure jet spray on the radio as this may cause to leak. Do not disassemble the radio. This could damage radio seals and result in leak paths into the radio. Radio maintenance should only be done in service depot that is equipped to test and replace the seal on the radio. NAG-LACR.book Page viii Tuesday, March 12, 2013 3:37 PM Handling Precautions The MOTOTRBO XPR 3300 Portable Radio meets IP55 specifications with antenna attached, allowing the radio to withstand adverse field conditions such as being used in rain or dusty environment. If the radio has been exposed to water or rain, shake the radio well to remove any water that may be trapped inside the speaker grille, port and aesthetic cover (if applicable). Trapped water in speaker grille and port could cause decreased audio performance. If aesthetic cover is attached onto radio, trapped water in aesthetic cover could cause corrosion on the slim connector interface gold contacts. If the radios battery contact area has been exposed to water, clean and dry battery contacts on both the radio and the battery before attaching the battery to the radio. The residual water could short-circuit the radio. If the radio has been exposed to corrosive substance
(e.g.saltwater), rinse the radio and battery in fresh water then dry the radio and battery. To clean the exterior surfaces of the radio, use a diluted solution of mild dishwashing detergent and fresh water (i.e. one teaspoon of detergent to one gallon of water). The radio with antenna attached properly is designed to be protected against dust and low pressure jets of water projected with nozzle 6.3mm diameter at flow rate of 12.5 l/min, with water pressure at 30 kN/m2 and from a distance of 2.5m to 3m for at least 3 min. Exceeding either s n o i t u a c e r P g n i l d n a H viii English draft NAG-LACR.book Page 1 Tuesday, March 12, 2013 3:37 PM Getting Started Take a moment to review the following:
How to Use This Guide . page 1 What Your Dealer/System Administrator Can Tell You. page 1 How to Use This Guide This User Guide covers the basic operation of the MOTOTRBO Non-Display Portables. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information. Throughout this publication, the icons below are used to indicate features supported in either the conventional Analog mode or conventional Digital mode:
Indicates a conventional Analog Mode-Only feature. Indicates a conventional Digital Mode-Only feature. For features that are available in both Analog and Digital modes, no icon is shown. G e t t i n g S t a r t e d For features that are available in a conventional multi-site mode, see IP Site Connect on page 10 for more information. Selected features are also available on the single-site trunking mode, Capacity Plus. See Capacity Plus on page 12 for more information. Selected features are also available in the multi-site trunking mode, Linked Capacity Plus. See Linked Capacity Plus on page 12 for more information. What Your Dealer/System Administrator Can Tell You You can consult your dealer or system administrator about the following:
Is your radio programmed with any preset conventional channels?
Which buttons have been programmed to access other features?
What optional accessories may suit your needs?
What are the best radio usage practices for effective communication?
What maintenance procedures will help promote longer radio life?
1 English draft NAG-LACR.book Page 2 Tuesday, March 12, 2013 3:37 PM Preparing Your Radio for Use Assemble your radio by following these steps:
Charging the Battery . page 2 Attaching the Battery. page 3 Attaching the Antenna. page 3 Attaching the Universal Connector Cover (Dust Cover) . page 4 Attaching the Accessory Connector . page 4 Powering Up the Radio . page 5 Adjusting the Volume . page 5 Charging the Battery Your radio is powered by a Lithium-Ion (Li-lon) battery. To avoid damage and comply with warranty terms, charge the battery using a Motorola charger exactly as described in the charger user guide. It is recommended your radio remains powered off while charging. Charge a new battery 14 to 16 hours before initial use for best performance. IMPORTANT: ALWAYS charge your IMPRES battery with an IMPRES charger for optimized battery life and valuable battery data. IMPRES batteries charged exclusively with IMPRES chargers receive a 6-month capacity warranty extension over the standard Motorola Premium battery warranty duration. i e s U r o f o d a R r u o Y g n i r a p e r P 2 English draft NAG-LACR.book Page 3 Tuesday, March 12, 2013 3:37 PM Attaching the Battery Attaching the Antenna Align the battery with the rails on the back of the radio. Fit the battery to the contacts and push the top of the battery down until the latch snaps into place. With the radio turned off, set the antenna in its receptacle and turn clockwise. To remove the antenna, turn the antenna counterclockwise. 3 1 If antenna needs to be replaced, ensure that only MOTOTRBO antennas are used. Neglecting this will damage your radio. See Antennas on page 45 for a list of available antennas. To remove the battery, turn the radio off. Move the battery latch into unlock position and hold. Battery Latch P r e p a r i n g Y o u r R a d o f o r U s e i 3 English draft NAG-LACR.book Page 4 Tuesday, March 12, 2013 3:37 PM Attaching the Universal Connector Cover
(Dust Cover) The universal connector is located on the antenna side of the radio. It is used to connect MOTOTRBO accessories to the radio. 1 Insert the slanted end of the cover into the slots above the universal connector. i e s U r o f o d a R r u o Y g n i r a p e r P 2 Press downwards on the cover to seat the dust cover properly on the Universal Connector. 3 Secure the dust cover to the radio by pushing the latch upwards. To remove the dust cover, push the latch downwards. Lift the cover up and slide down the dust cover from the universal connector to remove it. Replace the dust cover when the universal connector is not in use. 1 2 3 4 English Attaching the Accessory Connector The accessory connector is to be secured to the universal connector on the antenna side of he radio. To attach the accessory connector, refer to the steps shown in the diagram. To remove the accessory connector, refer to the steps shown in the diagram. 1 2 3 3 2 1 draft NAG-LACR.book Page 5 Tuesday, March 12, 2013 3:37 PM Powering Up the Radio Adjusting the Volume Rotate the On/Off/Volume Control Knob clockwise until you hear a click. The LED lights up solid green. A brief tone sounds, indicating that the power up test is successful.There is no power up tone if the radio tones/alerts function is disabled (see Turning Radio Tones/Alerts On or Off on page 43). If your radio does not power up, check your battery. Make sure that it is charged and properly attached. If your radio still does not power up, contact your dealer. 3 1 To turn off the radio, rotate this knob counterclockwise until you hear a click. To increase the volume, turn the On/Off/Volume Control Knob clockwise. 3 1 To decrease the volume, turn this knob counterclockwise. Note:
Your radio can be programmed to have a minimum volume offset where the volume level cannot be turned down fully. Check with your dealer or system administrator for more information. P r e p a r i n g Y o u r R a d o f o r U s e i 5 English draft NAG-LACR.book Page 6 Tuesday, March 12, 2013 3:37 PM Identifying Radio Controls Take a moment to review the following:
Radio Controls . page 7 Programmable Buttons . page 8 Push-To-Talk (PTT) Button . page 9 Switching Between Conventional Analog and Digital Mode. page 10 IP Site Connect . page 10 Capacity Plus . page 12 Linked Capacity Plus. page 12 l i s o r t n o C o d a R g n y f i t n e d i I 6 English draft 5 6 7 8 9 10 11 Side Button 1*
Side Button 2*
Speaker Universal Connector for Accessories Emergency Button Antenna
* These buttons are programmable NAG-LACR.book Page 7 Tuesday, March 12, 2013 3:37 PM Radio Controls 1 2 3 4 5 6 3 1 11 10 9 8 7 1 2 3 4 Channel Selector Knob On/Off/Volume Control Knob LED Indicator Push-to-Talk (PTT) Button I i d e n t i f y n g R a d o C o n t r o s i l 7 English draft NAG-LACR.book Page 8 Tuesday, March 12, 2013 3:37 PM Programmable Buttons Your dealer can program the programmable buttons as shortcuts to radio functions or preset channels/groups depending on the duration of a button press:
Short press Pressing and releasing rapidly. Long press Pressing and holding for the programmed duration. Hold down Keeping the button pressed. NOTE: The programmed duration of a button press is applicable for all assignable radio/utility functions or settings. See Emergency Operation on page 33 for more information on the programmed duration of the Emergency button.
Assignable Radio Functions Bluetooth Audio Switch Toggles audio routing between internal radio speaker and external Bluetooth-enabled accessory. Bluetooth Connect Initiates a Bluetooth find-and-connect operation. Bluetooth Disconnect Terminates all existing Bluetooth connections between your radio and any Bluetooth-enabled devices. l i s o r t n o C o d a R g n y f i t n e d i I 8 English Bluetooth Discoverable Enables your radio to enter Bluetooth Discoverable Mode. Call Forwarding Toggles Call Forwarding on or off. Voice Announcement for Channel Plays zone and channel announcement voice messages for the current channel. This function is unavailable when Voice Announcement is disabled. Emergency Depending on the programming, initiates or cancels an emergency alarm or call. Intelligent Audio On/Off Toggles Intelligent Audio on or off. Manual Site Roam*
Starts the manual site search. Mic AGC On/Off Toggles the internal automatic gain control
(AGC) on or off. Not applicable during a Bluetooth session. Monitor Monitors a selected channel for activity. Nuisance Channel Delete* Temporarily removes an unwanted channel, except for the Selected Channel, from the scan list. The Selected Channel refers to the users selected zone/channel combination from which scan is initiated. Notifications Provides direct access to the Notifications List. One Touch Access Private or Group Call, a Call Alert. Directly initiates a predefined
* Not applicable in Capacity Plus Not applicable in Linked Capacity Plus draft NAG-LACR.book Page 9 Tuesday, March 12, 2013 3:37 PM Permanent Monitor* Monitors a selected channel for all radio traffic until function is disabled. Privacy Toggles privacy on or off. Repeater/Talkaround* Toggles between using a repeater and communicating directly with another radio. Scan* Toggles scan on or off. Site Lock On/Off*
or off. Toggles the automatic site roam on Transmit Interrupt Remote Dekey Stops an ongoing interruptible call to free the channel. (A Software License Key sold separately is required to use this feature). Voice Announcement On/Off Toggles Voice Announcement on or off. Voice Operating Transmission (VOX) Toggles VOX on or off. Zone Allows selection from only one zone. Battery Strength Indicates battery strength via the LED Indicator.
* Not applicable in Capacity Plus Not applicable in Linked Capacity Plus Assignable Settings or Utility Functions
All Tones/Alerts Toggles all tones and alerts on or off. Power Level Toggles transmit power level between high and low. Squelch normal. Toggles squelch level between tight and Push-To-Talk (PTT) Button The PTT button on the side of the radio serves two basic purposes:
While a call is in progress, the PTT button allows the radio to transmit to other radios in the call. PTT Button 3 1 Press and hold down PTT button to talk. Release the PTT button to listen. The is activated when the PTT button is pressed. I i d e n t i f y n g R a d o C o n t r o s i l 9 English draft NAG-LACR.book Page 10 Tuesday, March 12, 2013 3:37 PM While a call is not in progress, the PTT button is used to make a new call (see Making a Radio Call on page 23). Depending on programming, if the Talk Permit Tone or the PTT Sidetone before talking. is enabled, wait until the short alert tone ends During a call, if the Channel Free Indication feature is enabled on your radio (programmed by your dealer), you will hear a short alert tone the moment the target radio (the radio that is receiving your call) releases the PTT button, indicating the channel is free for you to respond. You will also hear a continuous talk prohibit tone, if your call is interrupted, indicating that you should release the PTT button, for example when the radio receives an Emergency Call. l i s o r t n o C o d a R g n y f i t n e d i I 10 English Switching Between Conventional Analog and Digital Mode Channel Selector Knob Each channel in your radio can be configured as a conventional analog or conventional digital channel. Use the Channel Selector Knob to switch between an analog or a digital channel. When switching from digital to analog mode, certain features are unavailable. Your radio also has features available in both analog and digital mode. However, the minor differences in the way each feature works does NOT affect the performance of your radio. NOTE: Your radio also switches between digital and analog 3 1 modes during a dual mode scan (see Scan on page 30). IP Site Connect This feature allows your radio to extend conventional communication beyond the reach of a single site, by connecting to different available sites which are connected via an Internet Protocol (IP) network. draft NAG-LACR.book Page 11 Tuesday, March 12, 2013 3:37 PM NOTE: This feature is not applicable in Capacity Plus. When the radio moves out of range from one site and into the range of another, it connects to the new site's repeater to send or receive calls/data transmissions. Depending on your settings, this is done automatically or manually. If the radio is set to do this automatically, it scans through all available sites when the signal from the current site is weak or when the radio is unable to detect any signal from the current site. It then locks on to the repeater with the strongest Received Signal Strength Indicator (RSSI) value. In a manual site search, the radio searches for the next site in the roam list that is currently in range (but which may not have the strongest signal) and locks on to it. NOTE: Each channel can only have either Scan or Roam enabled, not both at the same time. Channels with this feature enabled can be added to a particular roam list. The radio searches the channel(s) in the Members roam list during the automatic roam operation to locate the best site. A Members roam list supports a maximum of 16 channels
(including the Selected Channel). You cannot manually add or delete an entry to the Members roam list. A Software License Key sold separately is required to use this feature. Check with your dealer or system administrator for more information. I i d e n t i f y n g R a d o C o n t r o s i l 11 English draft NAG-LACR.book Page 12 Tuesday, March 12, 2013 3:37 PM Capacity Plus Linked Capacity Plus Capacity Plus is a single-site trunking configuration of the MOTOTRBO radio system, which uses a pool of channels to support hundreds of users and up to 254 Groups. This feature allows your radio to efficiently utilize the available number of programmed channels while in Repeater Mode. You can only access channel(s) with Capacity Plus via the Channel Selector Knob, while features supported in Capacity Plus can be accessed via a programmable button press. You will hear a negative indicator tone if you access a feature not applicable to Capacity Plus via a programmable button press. Your radio also has features that are available in both conventional digital mode and Capacity Plus. However, the minor differences in the way each feature works does NOT affect the performance of your radio.A Software License Key sold separately is required to use this feature. Check with your dealer or system administrator for more information on this system. l i s o r t n o C o d a R g n y f i t n e d i I 12 English Linked Capacity Plus is a multi-site multi-channel trunking configuration of the MOTOTRBO radio system, combining the best of both Capacity Plus and IP Site Connect configurations. Linked Capacity Plus allows your radio to extend trunking communication beyond the reach of a single site, by connecting to different available sites which are connected via an Internet Protocol (IP) network. It also provides an increase in capacity by efficiently utilizing the combined available number of programmed channels supported by each of the available sites. When the radio moves out of range from one site and into the range of another, it connects to the new site's repeater to send or receive calls/data transmissions. Depending on your settings, this is done automatically or manually. If the radio is set to do this automatically, it scans through all available sites when the signal from the current site is weak or when the radio is unable to detect any signal from the current site. It then locks on to the repeater with the strongest Received Signal Strength Indicator (RSSI) value. In a manual site search, the radio searches for the next site in the roam list that is currently in range (but which may not have the strongest signal) and locks on to it. Any channel with Linked Capacity Plus enabled can be added to a particular roam list. The radio searches these channels during the automatic roam operation to locate the best site. draft NAG-LACR.book Page 13 Tuesday, March 12, 2013 3:37 PM NOTE: You cannot manually add or delete an entry to the roam list. Check with your dealer or system administrator for more information. Similar to Capacity Plus, icons of features not applicable to Linked Capacity Plus are not available in the menu. You hear a negative indicator tone if you try to access a feature not applicable to Linked Capacity Plus via a programmable button press. A Software License Key sold separately is required to use this feature Check with your dealer or system administrator for more information on this configuration. I i d e n t i f y n g R a d o C o n t r o s i l 13 English draft NAG-LACR.book Page 14 Tuesday, March 12, 2013 3:37 PM l i s o r t n o C o d a R g n y f i t n e d i I 14 English draft NAG-LACR.book Page 15 Tuesday, March 12, 2013 3:37 PM Identifying Status Indicators Your radio indicates its operational status through the following:
LED Indicator. page 15 Audio Tones. page 16 Indicator Tones . page 17 LED Indicator I 3 1 LED Indicator The LED indicator shows the operational status of your radio. Blinking red Radio is transmitting at low battery condition, receiving an emergency transmission or has failed the self-test upon powering up, or has moved out of range if radio is configured with Auto-Range Transponder System. Solid yellow Radio is monitoring a conventional channel or in Bluetooth Discoverable Mode. Also indicates fair battery charge when Battery Strength button is pressed. Blinking yellow Radio is scanning for activity or receiving a Call Alert, or all local Linked Capacity Plus channels are busy. Rapidly blinking yellow Radio is actively searching for a new site. i d e n t i f y n g S t a t u s I i n d c a t o r s 15 English draft NAG-LACR.book Page 16 Tuesday, March 12, 2013 3:37 PM Double blinking yellow Radio is no longer connected to the repeater while in Capacity Plus or Linked Capacity Plus, all Capacity Plus channels and Linked Capacity Plus channels are currently busy, Auto Roaming is enabled, radio is actively searching for a new site. Also indicates radio has yet to respond to a group call alert, or radio is locked. Solid green Radio is powering up, or transmitting. Also indicates full charge of the battery when Battery Strength button is pressed. Blinking green Radio is receiving a non-privacy-enabled call or data, detecting activity or retrieving Over-the-Air Programming transmissions over the air. Double blinking green Radio is receiving a privacy-enabled call or data. NOTE: While in conventional mode, when the LED blinks green, it indicates the radio detects activity over the air. Due to the nature of the digital protocol, this activity may or may not affect the radio's programmed channel. For Capacity Plus and Linked Capacity Plus, there is no LED indication when the radio is detecting activity over the air. Audio Tones Alert tones provide you with audible indications of the radios status or the radios response to data received. Continuous Tone A monotone sound. Sounds continuously until termination. Periodic Tone Sounds periodically depending on the duration set by the radio. Tone starts, stops, and repeats itself. Repetitive Tone A single tone that repeats itself until it is terminated by the user. Momentary Tone Sounds only once for a short period of time defined by the radio. s r o t a c d n i I s u t a t S g n y f i t n e d i I 16 English draft NAG-LACR.book Page 17 Tuesday, March 12, 2013 3:37 PM Indicator Tones High pitched tone Low pitched tone Positive Indicator Tone Negative Indicator Tone I i d e n t i f y n g S t a t u s I i n d c a t o r s 17 English draft NAG-LACR.book Page 18 Tuesday, March 12, 2013 3:37 PM Receiving and Making Calls Once you understand how your MOTOTRBO Portable is configured, you are ready to use your radio. Use this navigation guide to familiarize yourself with the basic Call features:
Selecting a Radio Channel, Subscriber ID, or Group ID . page 18 Receiving and Responding to a Radio Call. page 19 Making a Radio Call . page 23 Stopping a Radio Call . page 26 Talkaround . page 27 Monitoring Features . page 27 s l l i a C g n k a M d n a g n v i i e c e R 18 English Selecting a Channel Transmissions are sent and received on a channel. Depending on your radios configuration, each channel may have been programmed differently to support different groups of users or supplied with different features. After selecting the relevant Zone, select the relevant channel you require to transmit or receive on. 3 1 Procedure:
Once the required zone is set (if you have multiple zones in your radio), turn the Channel Selector Knob to select the number that represents the channel, subscriber ID, or group ID. draft NAG-LACR.book Page 19 Tuesday, March 12, 2013 3:37 PM Receiving and Responding to a Radio Call Once the channel, subscriber ID, or group ID is set, you can proceed to receive and respond to calls. LED Indicator 3 1 The LED lights up solid green while the radio is transmitting and blinks when the radio is receiving. NOTE: The LED lights up solid green while the radio is transmitting and double blinks green when the radio is receiving a privacy-enabled call. To unscramble a privacy-enabled call, your radio must have the same Privacy Key, OR the same Key Value and Key ID (programmed by your dealer) as the transmitting radio (the radio you are receiving the call from). See Privacy on page 36 for more information.
Receiving and Responding to a Group Call To receive a call from a group of users, your radio must be configured as part of that group. 1 The LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 2 To respond, hold the radio vertically 1 to 2 inches
(2.5 to 5.0 cm) from your mouth. 3 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond to the call. OR If the Voice Interrupt feature is enabled, press the PTT button to stop the current call from the transmitting radio and free the channel for you to talk/respond. R e c e i i v n g a n d M a k n g C a i l l s 4 The LED lights up solid green. 5 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the . OR 19 English draft NAG-LACR.book Page 20 Tuesday, March 12, 2013 3:37 PM Wait for the PTT Sidetone to finish (if enabled) and speak clearly into the . 6 Release the PTT button to listen. 7 If there is no voice activity for a predetermined period of time, the call ends. See Making a Group Call on page 23 for details on making a Group Call.
Receiving and Responding to a Private Call A Private Call is a call from an individual radio to another individual radio. Procedure:
When you receive a private call:
1 The LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 2 To respond, hold the radio vertically 1 to 2 inches
(2.5 to 5.0 cm) from your mouth. If the Voice Interrupt feature is enabled, press the PTT button to stop the current call from the transmitting radio and free the channel for you to talk/respond. 4 Press the PTT button to respond to the call. The LED lights up solid green. 5 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the . 6 Release the PTT button to listen. 7 If there is no voice activity for a predetermined period of time, the call ends. 8 You hear a short tone. See Making a Private Call on page 24 for details on making a Private Call. 3 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond to the call. OR s l l i a C g n k a M d n a g n v i i e c e R 20 English draft NAG-LACR.book Page 21 Tuesday, March 12, 2013 3:37 PM Receiving and Responding to a Selective Call
A Selective Call is a call from an individual radio to another individual radio. It is a Private Call on an analog system. Procedure:
When you receive a Selective Call:
1 The LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 2 To respond, hold the radio vertically 1 to 2 inches
(2.5 to 5.0 cm) from your mouth. 3 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond to the call. 4 Press the PTT button to respond to the call. The LED lights up solid green. 5 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the . 6 Release the PTT button to listen. 7 If there is no voice activity for a predetermined period of time, the call ends. 8 You hear a short tone. See Making a Selective Call on page 25 for details on making a Selective Call. Receiving an All Call
An All Call is a call from an individual radio to every radio on the channel. It is used to make important announcements requiring the users full attention. Procedure:
When you receive an All Call:
1 A tone sounds and the LED blinks green. Your radio unmutes and the incoming call sounds through the radio's speaker. 2 An All Call does not wait for a predetermined period of time before ending. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is now available for use. You cannot respond to an All Call. NOTE: The radio stops receiving the All Call if you switch to a different channel while receiving the call. During an All Call, you will not be able to use any programmed button functions until the call ends. R e c e i i v n g a n d M a k n g C a i l l s 21 English draft NAG-LACR.book Page 22 Tuesday, March 12, 2013 3:37 PM
Receiving and Responding to a Phone Call Phone Call as a Private Call or Group Call
Procedure:
When you receive a Phone Call as a Private Call or Group Call:
1 The LED blinks green. Your radio unmutes and the incoming call sounds through the radios speaker. 2 To respond, hold the radio vertically 1 to 2 inches
(2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to talk and release it to listen. 4 Press d to end the call. 5 You hear a short tone. If Phone Call capability is not enabled in your radio, your radio mutes the call. Phone Call as an All Call
Procedure:
When you receive a Phone Call as an All Call:
The LED blinks green. Your radio unmutes and the incoming call sounds through the radios speaker. An All Call does not wait for a predetermined period of time before ending. NOTE: When you receive a Phone Call as an All Call, you can respond to the call or end the call, only if an All Call type is assigned to the channel. s l l i a C g n k a M d n a g n v i i e c e R 22 English draft NAG-LACR.book Page 23 Tuesday, March 12, 2013 3:37 PM Making a Radio Call
You can select a channel, subscriber ID or group ID by using:
The Channel Selector Knob. A programmed One Touch Access button. A programmable button This method is for Phone Calls only
(see Making a Phone Call with the Programmable Phone Button on page 26). NOTE: Your radio must have the Privacy feature enabled on the channel to send a privacy-enabled transmission. Only target radios with the same Privacy Key OR the same Key Value and Key ID as your radio will be able to unscramble the transmission. See Privacy on page 36 for more information. The One Touch Access feature allows you to make a Group or Private Call to a predefined ID easily. This feature can be assigned to a short or long programmable button press.You can ONLY have one ID assigned to a One Touch Access button. Your radio can have multiple One Touch Access buttons programmed. Making a Call with the Channel Selector Knob Making a Group Call
To make a call to a group of users, your radio must be configured as part of that group. Procedure:
1 Select the channel with the active group alias or ID. See Selecting a Channel on page 18. OR Press the programmed One Touch Access button. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. 4 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the . OR Wait for the PTT Sidetone to finish (if enabled) and speak clearly into the . 5 Release the PTT button to listen. When the target radio responds, the LED blinks green. R e c e i i v n g a n d M a k n g C a i l l s 23 English draft NAG-LACR.book Page 24 Tuesday, March 12, 2013 3:37 PM 6 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. OR If there is no voice activity for a predetermined period of time, the call ends.
Making a Private Call While you can receive and/or respond to a Private Call initiated by an authorized individual radio, your radio must be programmed for you to initiate a Private Call. There are two types of Private Calls. The first type, where a radio presence check is performed prior to setting up the call, while the other sets up the call immediately. Only one of these call types can be programmed to your radio by your dealer. You hear a negative indicator tone, when you make a Private Call via the One Touch Access button or the Channel Selector Knob, if this feature is not enabled. Use the Call Alert features to contact an individual radio. See Call Alert Operation on page 32 for more information. s l l i a C g n k a M d n a g n v i i e c e R 24 English Procedure:
1 Select the channel with the active group alias or ID. See Selecting a Channel on page 18. OR Press the programmed One Touch Access button. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. 4 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the . 5 Release the PTT button to listen. When the target radio responds, the LED blinks green. 6 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. OR If there is no voice activity for a predetermined period of time, the call ends. 7 You hear a short tone. draft NAG-LACR.book Page 25 Tuesday, March 12, 2013 3:37 PM Making a Selective Call
Just like a Private Call, while you can receive and/or respond to a Selective Call initiated by an authorized individual radio, your radio must be programmed for you to initiate a Selective Call. Procedure:
1 Select the channel with the active group alias or ID. See Selecting a Channel on page 18. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. 4 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the . 5 Release the PTT button to listen. When the target radio responds, the LED blinks green. 6 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. OR If there is no voice activity for a predetermined period of time, the call ends. 7 You hear a short tone. Making an All Call
This feature allows you to transmit to all users on the channel. Your radio must be programmed to allow you to use this feature. Procedure:
1 Select the channel with the active group alias or ID. See Selecting a Channel on page 18. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call. The LED lights up solid green. 4 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the . OR Wait for the PTT Sidetone to finish (if enabled) and speak clearly into the . Users on the channel cannot respond to an All Call. R e c e i i v n g a n d M a k n g C a i l l s 25 English draft NAG-LACR.book Page 26 Tuesday, March 12, 2013 3:37 PM
Making a Phone Call with the Programmable Phone Button Procedure:
1 Press the programmed Phone button. 2 The LED lights up solid green. 3 You hear the dialing tone of the telephone user. 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 5 Press the PTT button to talk and release it to listen. 6 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. OR If there is no voice activity for a predetermined period of time, the call ends. 7 You hear a short tone. When you press PTT button while in the Phone Contacts screen, a tone sounds. When the telephone user ends the call, a tone sounds. During the call, when you press One Touch Access button with the deaccess code preconfigured, your radio attempts to end the call. s l l i a C g n k a M d n a g n v i i e c e R 26 English Stopping a Radio Call This feature allows you to stop an ongoing Group or Private Call to free the channel for transmission. For example, when a radio experiences a stuck condition where the PTT button is inadvertently pressed by the user. Your radio must be programmed to allow you to use this feature. Procedure:
While on the required channel:
1 Press the programmed Transmit Interrupt Remote Dekey button. 2 Wait for acknowledgment. 3 The radio sounds a positive indicator tone, indicating that the channel is now free. OR The radio sounds a negative indicator tone, indicating that the radio is unable to free the channel. Your radio sounds a negative indicator tone until you release the PTT button, if it is transmitting an interruptible call that is stopped via this feature. draft NAG-LACR.book Page 27 Tuesday, March 12, 2013 3:37 PM Talkaround Monitoring Features You can continue to communicate when your repeater is not operating, or when your radio is out of the repeaters range but within talking range of other radios. This is called talkaround. NOTE: This feature is not applicable in Capacity Plus and Linked Capacity Plus. Procedure:
1 Press the programmed Repeater/Talkaround button. 2 You hear a positive indicator tone, indicating the radio is in Talkaround mode. OR You hear a negative indicator tone, indicating the radio is in Repeater mode. The Talkaround setting is retained even after powering down. Monitoring a Channel
Use the Monitor feature to make sure a channel is free before transmitting. NOTE: This feature is not applicable in Capacity Plus and Linked Capacity Plus. Procedure:
1 Press and hold the programmed Monitor button and listen for activity. 2 You hear radio activity or total silence, depending on how your radio is programmed. 3 When you hear white noise (that is, the channel is free), press the PTT button to talk and release it to listen. The LED lights up solid yellow. R e c e i i v n g a n d M a k n g C a i l l s 27 English draft NAG-LACR.book Page 28 Tuesday, March 12, 2013 3:37 PM Permanent Monitor
Use the Permanent Monitor feature to continuously monitor a selected channel for activity. NOTE: This feature is not applicable in Capacity Plus and Linked Capacity Plus. Procedure:
1 Press the programmed Permanent Monitor button. 2 Radio sounds alert tone, and the LED lights up solid yellow. 3 Press the programmed Permanent Monitor button to remove the radio from permanent monitor mode. 4 Radio sounds an alert tone and the LED turns off. s l l i a C g n k a M d n a g n v i i e c e R 28 English draft NAG-LACR.book Page 29 Tuesday, March 12, 2013 3:37 PM Advanced Features Use this navigation guide to learn more about advanced features available with your radio:
Scan Lists . page 29 Scan . page 30 Call Indicator Settings . page 32 Call Alert Operation . page 32 Emergency Operation . page 33 Privacy. page 36 Multi-Site Controls . page 37 Lone Worker . page 38 Password Lock Features. page 38 Bluetooth . page 40 Auto-Range Transponder System (ARTS) . page 41 Over-the-Air Programming (OTAP) . page 42 Utilities. page 42 Scan Lists Scan lists are created and assigned to individual channels/
groups. Your radio scans for voice activity by cycling through the channel/group sequence specified in the scan list for the current channel. Your radio supports up to 250 scan lists, with a maximum of 16 members in a list. Each scan list shall support a mixture of both analog and digital entries. NOTE: This feature is not applicable in Capacity Plus and Linked Capacity Plus. A d v a n c e d F e a t u r e s 29 English draft NAG-LACR.book Page 30 Tuesday, March 12, 2013 3:37 PM Scan When you start a scan, your radio cycles through the programmed scan list for the current channel looking for voice activity.The LED blinks yellow. During a dual mode scan, if you are on a digital channel, and your radio locks onto an analog channel, it automatically switches from digital mode to analog mode for the duration of the call. This is also true for the reverse. There are two types of scans:
Main Channel Scan (Manual): Your radio scans all the channels/groups in your scan list. On entering scan, your radio may depending on the settings automatically start on the last scanned active channel/group or on the channel where scan was initiated. Auto Scan (Automatic): Your radio automatically starts scanning when you select a channel/group that has Auto Scan enabled. NOTE: This feature is not applicable in Capacity Plus and Linked Capacity Plus. s e r u t a e F d e c n a v d A 30 English Starting and Stopping Scan
Procedure:
1 Press the programmed Scan button. OR Use the Channel Selector Knob to select a channel with Auto Scan enabled. 2 When Scan is enabled, the LED blinks yellow and you hear a positive indicator tone. OR When Scan is disabled, the LED turns off and you hear a negative indicator tone. Responding to a Transmission During a Scan
During scanning, your radio stops on a channel/group where activity is detected. The radio stays on that channel for a programmed time period known as hang time. Procedure:
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. draft NAG-LACR.book Page 31 Tuesday, March 12, 2013 3:37 PM 2 Press the PTT button during hang time. The LED lights up solid green. 3 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. OR Wait for the PTT Sidetone to finish (if enabled) and speak clearly into the microphone. 4 Release the PTT button to listen. 5 If you do not respond within the hang time, the radio returns to scanning other channels/groups. Deleting a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed a nuisance channel), you can temporarily remove the unwanted channel from the scan list. This capability does not apply to the channel designated as the Selected Channel. Procedure:
1 When your radio locks on to an unwanted or nuisance channel, press the programmed Nuisance Channel Delete button until you hear a tone. 2 Release the Nuisance Channel Delete button. The nuisance channel is deleted. A d v a n c e d F e a t u r e s Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, do one of the following:
Turn the radio off and power it on again, OR Stop and restart a scan via the programmed Scan button, OR Change the channel via the Channel Selector Knob. Vote Scan Vote Scan provides you with wide area coverage in areas where there are multiple base stations transmitting identical information on different analog channels. Your radio scans analog channels of multiple base stations and performs a voting process to select the strongest received signal. Once that is established, your radio unmutes to transmissions from that base station. The LED blinks yellow during the Vote Scan operation. To respond to a transmission during a Vote Scan, follow the same procedures as Responding to a Transmission During a Scan on page 30. 31 English draft Making a Call Alert with the One Touch Access Button Procedure:
1 Press the programmed One Touch Access button to make a Call Alert to the predefined ID. 2 The LED lights up solid green when your radio is sending the Call Alert. 3 If the Call Alert acknowledgement is received, two chirps sound. OR If the Call Alert acknowledgement is not received, a low-
pitch tone sounds. NAG-LACR.book Page 32 Tuesday, March 12, 2013 3:37 PM Call Indicator Settings You can turn on or off the ringing tones for a received Private Call (see Turning Radio Tones/Alerts On or Off on page 43). Escalating Alarm Tone Volume
Your radio can be programmed by your dealer to continually alert you when a radio call remains unanswered. This is done by automatically increasing the alarm tone volume over time. This feature is known as Escalert. Call Alert Operation Call Alert paging enables you to alert a specific radio user to call you back when they are able to do so. This feature is accessible via a programmed One Touch Access button. Receiving and Responding to a Call Alert
Procedure:
When you receive a Call Alert page:
1 You hear a repetitive tone. The LED blinks yellow. 2 Press the PTT button within four (4) seconds of receiving a Call Alert page to respond to the Private Call. s e r u t a e F d e c n a v d A 32 English draft NAG-LACR.book Page 33 Tuesday, March 12, 2013 3:37 PM Emergency Operation An Emergency Alarm is used to indicate a critical situation. You are able to initiate an Emergency at any time, in any state, even when there is activity on the current channel. Your dealer can set the duration of a button press for the programmed Emergency button, except for long press, which is similar with all other buttons:
Short press Between 0.05 seconds and 0.75 seconds Long press Between 1.00 second and 3.75 seconds The Emergency button is assigned with the Emergency On/Off feature. Check with your dealer for the assigned operation of the Emergency button. If short press the Emergency button is assigned to turn on the Emergency mode, then long press the Emergency button is assigned to exit the Emergency mode. If long press the Emergency button is assigned to turn on the Emergency mode, then short press the Emergency button is assigned to exit the Emergency mode. Your radio supports three Emergency Alarms:
Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow In addition, each alarm has the following types:
Regular Radio transmits an alarm signal and shows audio and/or visual indicators. Silent Radio transmits an alarm signal without any audio or visual indicators. Radio receives calls without any sound through the radios speaker, until you press the PTT button to initiate the call. Silent with Voice Radio transmits an alarm signal without any audio or visual indicators, but allow incoming calls to sound through the radios speaker. Only one of the Emergency Alarms above can be assigned to the programmed Emergency button. Sending an Emergency Alarm
This feature allows you to send an Emergency Alarm, a non-
voice signal, which triggers an alert indication on a group of radios. Procedure:
1 Press the programmed Emergency On button. 2 The LED lights up solid green. A d v a n c e d F e a t u r e s 33 English draft NAG-LACR.book Page 34 Tuesday, March 12, 2013 3:37 PM 3 When an Emergency Alarm acknowledgment is received, the Emergency tone sounds. The LED blinks green. OR If your radio does not receive an Emergency Alarm acknowledgement, and after all retries have been exhausted, a low-pitch tone sounds. 4 Radio exits the Emergency Alarm mode. If your radio is set to Silent, it will not display any audio or visual indicators during Emergency mode. Sending an Emergency Alarm with Call
This feature allows you to send an Emergency Alarm to a group of radios. Upon acknowledgement by a radio within the group, the group of radios can communicate over a programmed Emergency channel. Procedure:
1 Press the programmed Emergency On button. 2 The LED lights up solid green. 3 When an Emergency Alarm acknowledgment is received, the Emergency tone sounds. The LED blinks green. 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. s e r u t a e F d e c n a v d A 6 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. OR Wait for the PTT Sidetone to finish (if enabled) and speak clearly into the microphone. 7 Release the PTT button to listen. 8 When the channel is free for you to respond, a short alert if the Channel Free Indication feature is tone sounds (
enabled). Press the PTT button to respond. OR Once your call ends, press Emergency Off button to exit the Emergency mode. If your radio is set to Silent, it will not display any audio or visual indicators during Emergency mode, or allow any received calls to sound through the radios speaker, until you press the PTT button to initiate the call. If your radio is set to Silent with Voice, it will not display any audio or visual indicators during Emergency mode, but allow incoming calls to sound through the radios speaker. The indicators will only appear once you press the PTT button to initiate, or respond to, the call. 5 Press the PTT button to make the call. The LED lights up solid green. 34 English draft NAG-LACR.book Page 35 Tuesday, March 12, 2013 3:37 PM
Sending an Emergency Alarm with Voice to Follow This feature allows you to send an Emergency Alarm to a group of radios. Your radios microphone is automatically activated, allowing you to communicate with the group of radios without pressing the PTT button. This activated microphone state is also known as hot mic. If you press the PTT button during the programmed hot mic transmission period, the radio ignores the PTT press and remains in Emergency mode. NOTE: If you press the PTT button during hot mic, and continue to press it after the hot mic duration expires, the radio continues to transmit until you release the PTT button. Procedure:
1 Press the programmed Emergency On button. 2 The LED lights up solid green. 3 Once a tone sounds, speak clearly into the microphone. When hot mic has been enabled, the radio automatically transmits without a PTT press until the hot mic duration expires. While transmitting, the LED lights up solid green. A d v a n c e d F e a t u r e s 4 The radio automatically stops transmitting when:
Once the cycling duration between hot mic and receiving calls expires, if Emergency Cycle Mode is enabled. OR Once the hot mic duration expires, if Emergency Cycle Mode is disabled. 5 To transmit again, press the PTT button. OR Press the programmed Emergency Off button to exit the Emergency mode. If your radio is set to Silent, it will not display any audio or visual indicators during Emergency mode, or allow any received calls to sound through the radios speaker, until the programmed hot mic transmission period is over, and you press the PTT button. If your radio is set to Silent with Voice, it will not display any audio or visual indicators during Emergency mode when you are making the call with hot mic, but allow sound through the radios speaker when the target radio responds after the programmed hot mic transmission period is over. The indicators will only appear when you press the PTT button. NOTE:
If the Emergency Alarm request fails, the radio does not retry to send the request, and enters the hot mic state directly. 35 English draft NAG-LACR.book Page 36 Tuesday, March 12, 2013 3:37 PM Reinitiating an Emergency Mode
NOTE:
This feature is only applicable to the radio sending the Emergency Alarm. There are two instances where this can happen:
You change the channel while the radio is in Emergency mode. This exits the Emergency mode. If Emergency Alarm is enabled on this new channel, the radio reinitiates Emergency. You press the programmed Emergency On button during an Emergency initiation/transmission state. This causes the radio to exit this state, and to reinitiate Emergency. Exiting an Emergency Mode
NOTE: This feature is only applicable to the radio sending the Emergency Alarm. Your radio exits Emergency mode when one of the following occurs:
Emergency Alarm acknowledgement is received (for Emergency Alarm only), OR An Emergency Exit Telegram is received, OR All retries to send the alarm have been exhausted, OR The Emergency Off button is pressed. Turn the radio off and then power it on again if your radio has been programmed to remain on the Emergency Revert channel even after acknowledgement is received. s e r u t a e F d e c n a v d A 36 English NOTE:
If your radio is powered off, it exits the Emergency mode. The radio will not reinitiate the Emergency mode automatically when it is turned on again. Privacy If enabled, this feature helps to prevent eavesdropping by unauthorized users on a channel by the use of a software-
based scrambling solution. The signaling and user identification portions of a transmission are not scrambled. Your radio must have privacy enabled on the channel to send a privacy-enabled transmission, although this is not a necessary requirement for receiving a transmission. While on a privacy-
enabled channel, the radio is still able to receive clear
(unscrambled) transmissions. Your radio supports two types of privacy:
Basic Privacy Enhanced Privacy (A Software License Key sold separately is required for this feature.) Only ONE of the privacy types above can be assigned to the radio. To unscramble a privacy-enabled call or data transmission, your radio must be programmed to have the same Privacy Key (for Basic Privacy), OR the same Key Value and Key ID (for Enhanced Privacy) as the transmitting radio. draft NAG-LACR.book Page 37 Tuesday, March 12, 2013 3:37 PM If your radio receives a scrambled call that is of a different Privacy Key, OR a different Key Value and Key ID, you will either hear a garbled transmission (Basic Privacy) or nothing at all (Enhanced Privacy). The LED lights up solid green while the radio is transmitting and blinks green rapidly when the radio is receiving an ongoing privacy-enabled transmission. NOTE: Some radio models may not offer this Privacy feature. Check with your dealer or system administrator for more information. Procedure:
Press the programmed Privacy button to toggle privacy on or off. Multi-Site Controls These features are applicable when your current radio channel is part of an IP Site Connect or Linked Capacity Plus configuration. NOTE: See IP Site Connect on page 10 and Linked Capacity Plus on page 12 for more details about these configurations. A d v a n c e d F e a t u r e s Starting an Automatic Site Search
NOTE: The radio only scans for a new site if the current signal is weak or when the radio is unable to detect any signal from the current site. If the RSSI value is strong, the radio remains on the current site. Procedure:
1 Press the programmed Site Lock On/Off button. 2 A tone sounds. 3 The LED blinks yellow rapidly when the radio is actively searching for a new site, and turns off once the radio locks on to a site. The radio also performs an automatic site search (site is unlocked) during a PTT button press or data transmission if the current channel, multi-site channel with an attached roam list, is out of range. Stopping an Automatic Site Search
When the radio is actively searching for a new site:
Procedure:
1 Press the programmed Site Lock On/Off button. 2 A tone sounds and the LED turns off. 37 English draft NAG-LACR.book Page 38 Tuesday, March 12, 2013 3:37 PM Starting a Manual Site Search
Procedure:
1 Press the programmed Manual Site Roam button. 2 A tone sounds and the LED blinks green. 3 You hear a positive indicator tone and the LED turns off, indicating the radio is locked on to a site. OR You hear a negative indicator tone and the LED turns off, indicating the radio is unable to lock on to a site. Lone Worker s e r u t a e F d e c n a v d A This feature prompts an emergency to be raised if there is no user activity, such as any radio button press or activation of the channel selector, for a predefined time. Following no user activity for a programmed duration, the radio pre-warns the user via an audio indicator once the inactivity timer expires. If there is still no acknowledgment by the user before the predefined reminder timer expires, the radio initiates an Emergency Alarm. Only one of the following Emergency Alarms is assigned to this feature:
Emergency Alarm 38 English Emergency Alarm with Call Emergency Alarm with Voice to Follow The radio remains in the emergency state allowing voice messages to proceed until action is taken. See Emergency Operation on page 33 on ways to exit Emergency. NOTE: This feature is limited to radios with this function enabled. Check with your dealer or system administrator for more information. Password Lock Features If enabled, this feature allows you to access your radio via password upon powering up. Use the Channel Selector Knob and the three Side Buttons to enter password (see Linked Capacity Plus page 12 on page 6):
Channel Selector Knob positions 1 to 9 represent numbers 1 to 9, and position 10 represents number 0. Side Buttons 1 to 2 represent numbers 1 to 2. Accessing the Radio from Password
Procedure:
Power up the radio. 1 You hear a continuous tone. draft NAG-LACR.book Page 39 Tuesday, March 12, 2013 3:37 PM 2 Use the Channel Selector Knob to enter the first digit of the password. 3 Press Side Button 1 or 2 to enter each digit of the remaining three digits of the password. You hear a positive indicator tone for each Side Button press. When the second digit of the password is entered, your radio ignores any Channel Selector Knob position change. 4 When the last digit of the four-digit password is entered, your radio automatically checks the validity of the password. If the password is correct:
Your radio proceeds to power up. See Powering Up the Radio on page 5. OR If the password is incorrect:
You hear a continuous tone. Repeat Steps 1 to 3. OR After the third incorrect password, your radio enters into locked state. A tone sounds and the LED double blinks yellow. Your radio enters into locked state for 15 minutes, and responds to inputs from On/Off/Volume Control Knob. NOTE: The radio is unable to receive any call, including emergency calls, in locked state. Unlocking the Radio from Locked State
Procedure:
Wait for 15 minutes. Repeat Steps 1 to 4 in Accessing the Radio from Password on page 38. OR Power up the radio, if you have powered down the radio during locked state:
1 A tone sounds and the LED double blinks yellow. 2 Wait for 15 minutes. Repeat Steps 1 to 4 in Accessing the Radio from Password on page 38. Your radio restarts the 15 minute timer for locked state when you power up. A d v a n c e d F e a t u r e s 39 English draft NAG-LACR.book Page 40 Tuesday, March 12, 2013 3:37 PM Bluetooth This feature allows you to use your radio with a Bluetooth-
enabled device (accessory) via a Bluetooth connection. Your radio supports both Motorola and COTS (Commercially available Off-The-Shelf) Bluetooth-enabled devices. Bluetooth operates within a range of 10 meters line of sight. This is an unobstructed path between your radio and your Bluetooth-enabled device. It is not recommended that you leave your radio behind and expect your Bluetooth-enabled device to work with a high degree of reliability when they are separated. At the fringe areas of reception, both voice and tone quality will start to sound "garbled" or "broken". To correct this problem, simply position your radio and Bluetooth-enabled device closer to each other (within the 10-meter defined range) to re-establish clear audio reception. Your radios Bluetooth function has a maximum power of 2.5 mW (4 dBm) at the 10-meter range. Your radio can support up to 3 simultaneous Bluetooth connections with Bluetooth-enabled devices of unique types. For example, a headset, a scanner, and a PTT-Only Device
(POD). Multiple connections with Bluetooth-enabled devices of the same type are not supported. Refer to your respective Bluetooth-enabled devices user manual for more details on your Bluetooth-enabled devices full capabilities. s e r u t a e F d e c n a v d A 40 English Finding and Connecting to a Bluetooth Device
Procedure:
1 Turn on your Bluetooth-enabled device and place it in pairing mode. Refer to respective Bluetooth-enabled devices user manual. 2 On your radio, press the programmed Bluetooth Connect button. 3 A tone sounds and LED blinks yellow. 4 Your Bluetooth-enabled device may require additional steps to complete the pairing. Refer to respective Bluetooth-
enabled devices user manual. 5 If successful, a positive tone sounds. OR If unsuccessful, a negative indicator tone sounds. Do not turn off your Bluetooth-enabled device during the finding and connecting operation as this cancels the operation. Your radio connects to the Bluetooth-enabled device within range with either the strongest signal strength, or to one which it has connected to before in a prior session. NOTE: A pin code may be required to be programmed in your radio before it can pair with some devices. Contact your dealer for more information. draft NAG-LACR.book Page 41 Tuesday, March 12, 2013 3:37 PM Disconnecting from a Bluetooth Device
Procedure:
1 Press the programmed Bluetooth Disconnect button. 2 A positive indicator tone sounds when disconnected. Switching Audio Route
You can toggle audio routing between internal radio speaker and external Bluetooth-enabled accessory. Procedure:
1 Press the programmed Bluetooth Audio Switch button. A tone sounds when the audio route has switched. Auto-Range Transponder System
(ARTS) ARTS is an analog-only feature designed to inform you when your radio is out-of-range of other ARTS-equipped radios. ARTS-equipped radios transmit or receive signals periodically to confirm that they are within range of each other. Your dealer can program your radio to transmit or receive the ARTS signal. Your radio provides indications of states as follows:
First-Time Alert A tone sounds. ARTS-in-Range Alert A tone sounds, if programmed. ARTS-Out-of-Range Alert A tone sounds, and the LED rapidly blinks red. A d v a n c e d F e a t u r e s 41 English draft NAG-LACR.book Page 42 Tuesday, March 12, 2013 3:37 PM Over-the-Air Programming (OTAP) Utilities Your radio can be updated by your dealer remotely, via OTAP, without needing to be physically connected. Additionally, some settings can also be configured via OTAP. While undergoing OTAP, the LED blinks green. NOTE: When the radio is receiving high volume data, the channel is busy. A PTT button press at this time causes a negative tone to sound. Once the programming is complete, a tone sounds, and your radio restarts (powers off and on again). s e r u t a e F d e c n a v d A 42 English
Setting the Squelch Level You can adjust your radio's squelch level to filter out unwanted calls with low signal strength or channels that have a higher than normal background noise. Settings: Normal is the default. Tight filters out (unwanted) calls and/or background noise. However, calls from remote locations may also be filtered out. Procedure:
1 Press the programmed Squelch button. 2 You hear a positive indicator tone, indicating the radio is operating in tight squelch. OR You hear a negative indicator tone, indicating the radio is operating in normal squelch. Setting the Power Level
You can toggle your radios power setting between high or low for each channel. Settings: High enables communication with radios located at a considerable distance from you. Low enables communication with radios in closer proximity. draft NAG-LACR.book Page 43 Tuesday, March 12, 2013 3:37 PM Procedure:
1 Press the programmed Power Level button. 2 You hear a positive indicator tone, indicating the radio is transmitting at low power. OR You hear a negative indicator tone, indicating the radio is transmitting at high power.
Turning the Voice Operating Transmission (VOX) Feature On or Off This feature allows you to initiate a hands-free voice activated call on a programmed channel. The radio automatically transmits, for a programmed period, whenever the microphone on the VOX-capable accessory detects voice. Pressing the PTT button during radio operation will disable VOX. To re-enable VOX, do one of the following:
Turn the radio off and power it on again, OR Change the channel via the Channel Selector Knob, OR Follow the procedure below. NOTE: Turning this feature on or off is limited to radios with this function enabled. Check with your dealer or system administrator for more information. Procedure:
Press the programmed VOX button to toggle the feature on or off. If the Talk Permit Tone feature is enabled, use a trigger word to initiate the call. Wait for the Talk Permit Tone to finish before speaking clearly into the microphone.
Turning the Howling Suppressor Feature On or Off This feature allows you to minimize acoustic feedback in received calls. Procedure:
1 Press the programmed AF Suppressor button. 2 You hear a positive indicator tone, indicating that Howling Suppressor is now enabled. OR You hear a negative indicator tone, indicating that the radio is unable to activate Howling Suppressor. A d v a n c e d F e a t u r e s Turning Radio Tones/Alerts On or Off
You can enable and disable all radio tones and alerts (except for the incoming Emergency alert tone) if needed. Procedure:
1 Press the programmed All Tones/Alerts button. 43 English draft NAG-LACR.book Page 44 Tuesday, March 12, 2013 3:37 PM 2 You hear a positive indicator tone, indicating all tones and alerts are on. OR You hear a negative indicator tone, indicating all tones and alerts are off. Checking the Battery Strength
You can check how much battery power you have left. Settings: The LED Indicator in solid yellow indicates fair battery charge while solid green indicates full charge of the battery. Procedure:
Press the programmed Battery Strength button to view the battery strength via the LED Indicator. s e r u t a e F d e c n a v d A 44 English draft NAG-LACR.book Page 45 Tuesday, March 12, 2013 3:37 PM Accessories Your radio is compatible with the accessories listed in this chapter. Contact your dealer for details. Antennas . page 45 Batteries . page 45 Cables . page 45 Carry Devices . page 45 Chargers . page 45 Earbuds and Earpieces . page 46 Headsets and Headset Accessories . page 47 Remote Speaker s. page 47 Surveillance Accessories. page 48 Miscellaneous Accessories . page 48 Antennas VHF, 136 148MHz, Stubby Antenna (PMAD4119_) VHF, 146 160MHz, Stubby Antenna (PMAD4120_) VHF, 160 174MHz, Stubby Antenna (PMAD4121_) UHF, 403 450MHz, Stubby Antenna (PMAE4069_) UHF, 440 490MHz, Stubby Antenna (PMAE4070_) UHF, 470 527MHz, Stubby Antenna (PMAE4071_) Batteries Li-Ion, 1600mAH IP67 Battery (PMNN4440_) Cables Programming Cable USB (PMKN4115_) Programming Cable Slim Connector to DB25 and USB Plug
(PMKN4117_) Programming Cable Slim Connector to DB25 and TTR
(PMKN4116_) A c c e s s o r i e s Carry Devices Plastic Carry Case with Belt Clip (PMLN6545_) Chargers Single-Unit Charger, US Plug (PMTN4024_) Single-Unit Charger, EURO Plug (PMTN4025_) Single-Unit Charger, UK Plug (PMTN4026_) Core Single-Unit Charger, with Power Supply, US
(AAHTN3000_) Core Single-Unit Charger, Base Only (HTN9000_) 45 English draft NAG-LACR.book Page 46 Tuesday, March 12, 2013 3:37 PM Core Single-Unit Charger, Base Only (MDHTN9000_) Core Single-Unit Charger, with Switch Mode Power Supply, UK (PMLN5195_) Core Single-Unit Charger, with Switch Mode Power Supply, EURO (PMLN5196_) Core Single-Unit Charger, with Switch Mode Power Supply, US (PMLN5197_) IMPRES Single-Unit Charger, with Power Supply, US
(WPLN4182_) IMPRES Single-Unit Charger, with Power Supply, UK
(WPLN4183_) IMPRES Single-Unit Charger, with Power Supply, EURO
(WPLN4184_) IMPRES Single-Unit Charger, without Power Supply, US
(WPLN4199_) IMPRES Single-Unit Charger, with Power Supply
(WPLN4206_) IMPRES Single-Unit Charger, with Switch Mode Power Supply, EURO (PMLN5188_) IMPRES Single-Unit Charger, with Switch Mode Power Supply, UK (PMLN5194_) IMPRES Single-Unit Charger, with Switch Mode Power Supply, US (PMLN5198_) s e i r o s s e c c A 46 English IMPRES Single-Unit Charger, with Switch Mode Power Supply, Australia/New Zealand (PMLN5199_) Daisy Chain Charger (JMTN4011_) Multi-Unit Charger, UK Cord (WPLN4188_) Multi-Unit Charger, EURO Cord (WPLN4189_) Multi-Unit Charger, Australia/New Zealand Cord
(WPLN4190_) Multi-Unit Charger, no Power Cord (WPLN4197_) Multi-Unit Charger, US Cord (WPLN4205_) Multi-Unit Charger, with Display, US Plug (WPLN4192_) Multi-Unit Charger, with Display, UK Plug (WPLN4193_) Multi-Unit Charger, with Display, EURO Plug (WPLN4194_) Multi-Unit Charger, with Display, Australia/New Zealand Plug
(WPLN4195_) Multi-Unit Charger, with Display, no Power Cord
(WPLN4198_) Multi-Unit Charger, with Display, US Plug (WPLN4204_) Micro USB Travel Charger (SPN5334_) Earbuds and Earpieces Earbud with In-Line Mic/PTT, MagOne (PMLN5733_) draft NAG-LACR.book Page 47 Tuesday, March 12, 2013 3:37 PM Earpiece In-Line Mic/PTT Swivel, MagOne (PMLN5727_) Receive-Only Covered Earbud with Coiled Cord, for Remote Speaker (AARLN4885_) Receive-Only Flexible Earpiece for Remote Speaker
(WADN4190_) D-Shell Receive Only Earpiece (One Size) for Remote Speaker (PMLN4620_) Receiver-Only Earpiece with Translucent Tube and Rubber Eartip for Remote Speaker (RLN4941_) 1-Wire Earbud, 29cm Cord, Black (NNTN8294_) 1-Wire Earbud,116cm Cord, Black (NNTN8295_) Wireless Earpiece Maintenance Kit (NTN8821_) Ear Straps for CommPort Earpiece (for Secure Attachment to Ear), Pack of 10 (NTN8988_) Replacement Ear Tubes for CommPort Earpiece, Pack of 10
(RLN5037_) Replacement Ear Tips Kit for Wireless Ear Buds
(NNTN8316_) Non-Secure Wireless Headset & Push-to-Talk Device with Push-to-Talk Audio, 12-Inch Cable
(NNTN8125_)(NNTN8189_) Non-Secure Wireless Headset & Push-to-Talk Device with Push-to-Talk Audio, 9.5-Inch Cable (NNTN8126_) Non-Secure Wireless Headset & Push-to-Talk Device with Push-to-Talk Audio, 9-Inch Cable with Euro/UK Plug
(GMTN6356_) Non-Secure Wireless Push-to-Talk Device (NNTN8127_) Push-to-Talk Module, without Charger (NNTN8191_) Non-Secure HK200 Mobile Bluetooth Headset with US Plug
(89409N) Replacement Earpiece 12 Cable (for NNTN8125_)
(NTN2572_) Replacement Earpiece 9.5 Cable (for NNTN8126_)
(NTN2575_) Non-Secure Wireless Push-to-Talk Device (for NNTN8125_ and NNTN8126_) (NNTN8143_) A c c e s s o r i e s Headsets and Headset Accessories Remote Speaker s Heavy Duty Headset, Noise Cancelling with In-Line PTT
(PMLN5731_) Earset with Boom Microphone, MagOne (PMLN5732_) IMPRES Remote Speaker Large, Noise Cancelling with 3.5mm Jack (PMMN4071_) 47 English draft NAG-LACR.book Page 48 Tuesday, March 12, 2013 3:37 PM IMPRES Remote Speaker Small, with 3.5mm Jack
(PMMN4073_) Remote Speaker Small, No Emergency, IP57 (PMMN4075_) Remote Speaker Small with 3.5mm Jack (PMMN4076_) Surveillance Accessories 2-Wire Surveillance Kit, Black (PMLN5724_) 2-Wire Surveillance Kit, Beige (PMLN5726_) Miscellaneous Accessories Replacement Micro-USB Plug-In Charger (PMPN4009_) s e i r o s s e c c A 48 English draft NAG-LACR.book Page 49 Tuesday, March 12, 2013 3:37 PM Appendix: Maritime Radio Use in the VHF Frequency Range Take a moment to review the following:
Special Channel Assignments. page 49 Operating Frequency Requirements . page 50 Declaration of Compliance for the Use of Distress and Safety Frequencies. page 52 Technical Parameters for Interfacing External Data Sources. page 52 Special Channel Assignments
Emergency Channel If you are in imminent and grave danger at sea and require emergency assistance, use VHF Channel 16 to send a distress call to nearby vessels and the United States Coast Guard. Transmit the following information, in this order:
1 2 MAYDAY, MAYDAY, MAYDAY. THIS IS _____________________, CALL SIGN __________. State the name of the vessel in distress 3 times, followed by the call sign or other identification of the vessel, stated 3 times. 3 4 5 6 7 Repeat MAYDAY and the name of the vessel. WE ARE LOCATED AT _______________________. State the position of the vessel in distress, using any information that will help responders to locate you, e.g.:
latitude and longitude bearing (state whether you are using true or magnetic north) distance to a well-known landmark vessel course, speed or destination State the nature of the distress. Specify what kind of assistance you need. State the number of persons on board and the number needing medical attention, if any. 8 Mention any other information that would be helpful to responders, such as type of vessel, vessel length and/or tonnage, hull color, etc. OVER. 9 10 Wait for a response. 11 If you do not receive an immediate response, remain by the radio and repeat the transmission at intervals until you receive a response. Be prepared to follow any instructions given to you. A p p e n d i x
:
M a r i t i m e R a d o U s e i i n t h e V H F F r e q u e n c y R a n g e 49 English draft NAG-LACR.book Page 50 Tuesday, March 12, 2013 3:37 PM Non-Commercial Call Channel
For non-commercial transmissions, such as fishing reports, rendezvous arrangements, repair scheduling, or berthing information, use VHF Channel 9. Operating Frequency Requirements A radio designated for shipboard use must comply with Federal Communications Commission Rule Part 80 as follows:
on ships subject to Part II of Title III of the Communications Act, the radio must be capable of operating on the 156.800 MHz frequency on ships subject to the Safety Convention, the radio must be capable of operating:
in the simplex mode on the ship station transmitting frequencies specified in the 156.025 157.425 MHz frequency band, and in the semiduplex mode on the two frequency channels specified in the table below. NOTE: Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters. Additional information about operating requirements in the Maritime Services can be obtained from the full text of FCC Rule Part 80 and from the US Coast Guard. Table A-1: VHF Marine Channel List Frequency (MHz) Transmit 156.050 156.100 156.150 156.200 156.250 156.300 156.350 156.400 156.450 156.500 156.550 156.600 156.650 156.700 156.750 156.800 156.850 156.900 156.950 Receive 160.650 160.700 160.750 160.800 160.850 160.950 156.450 156.500 156.550 156.600 156.650 156.700 156.750 156.800 156.850 161.500 161.550 Channel Number 1 2
*
4 5 6 7 8 9 10 11 12 13**
14 15**
16 17**
18 19 e g n a R y c n e u q e r F F H V e h t n i i e s U o d a R e m i t i r a M i
:
x d n e p p A 50 English draft NAG-LACR.book Page 51 Tuesday, March 12, 2013 3:37 PM Table A-1: VHF Marine Channel List (Continued) Table A-1: VHF Marine Channel List (Continued) Channel Number 20
*
22
*
24 25 26 27 28 60
*
62 63
*
65 66 67**
68 69 71 72 73 Frequency (MHz) Transmit 157.000 157.050 157.100 157.150 157.200 157.250 157.300 157.350 157.400 156.025 156.075 156.125 156.175 156.225 156.275 156.325 156.375 156.425 156.475 156.575 156.625 156.675 Receive 161.600 161.650 161.700 161.750 161.800 161.850 161.900 161.950 162.000 160.625 160.675 160.725 160.775 160.825 160.875 160.925 156.375 156.425 156.475 156.575 156.675 Channel Number 74 75 76 77**
78 79 80
*
*
*
84 85 86 87 88 Frequency (MHz) Transmit 156.725
***
***
156.875 156.925 156.975 157.025 157.075 157.125 157.175 157.225 157.275 157.325 157.375 157.425 Receive 156.725
***
***
161.525 161.575 161.625 161.675 161.725 161.775 161.825 161.875 161.925 161.975 162.025
* Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters.
** Low power (1 W) only
*** Guard band NOTE: A in the Receive column indicates that the channel is transmit only. 51 English A p p e n d i x
:
M a r i t i m e R a d o U s e i i n t h e V H F F r e q u e n c y R a n g e draft NAG-LACR.book Page 52 Tuesday, March 12, 2013 3:37 PM Declaration of Compliance for the Use of Distress and Safety Frequencies Technical Parameters for Interfacing External Data Sources The radio equipment does not employ a modulation other than the internationally adopted modulation for maritime use when it operates on the distress and safety frequencies specified in RSS-182 Section 7.3. Input Voltage (Volts Peak-to-peak) Max Data Rate Impedance RS232 18V 28 kb/s 5k ohm USB 3.6V 12 Mb/s 90 ohm SB9600 5V 9.6 kb/s 120 ohm e g n a R y c n e u q e r F F H V e h t n i i e s U o d a R e m i t i r a M i
:
x d n e p p A 52 English draft NAG-LACR.book Page 53 Tuesday, March 12, 2013 3:37 PM Batteries and Chargers Warranty The Workmanship Warranty The workmanship warranty guarantees against defects in workmanship under normal use and service. All MOTOTRBO Batteries IMPRES Chargers (Single-Unit and Multi-Unit, Non-Display) IMPRES Chargers (Multi-Unit with Display) Two (2) Years Two (2) Years One (1) Year The Capacity Warranty The capacity warranty guarantees 80% of the rated capacity for the warranty duration. Lithium-Ion (Li-lon) Batteries IMPRES Batteries, When Used Exclusively with IMPRES Chargers 12 Months 18 Months B a t t e r i e s a n d C h a r g e r s W a r r a n t y 53 English draft NAG-LACR.book Page 54 Tuesday, March 12, 2013 3:37 PM Limited Warranty MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
MOTOROLA SOLUTIONS, INC. (MOTOROLA) warrants the MOTOROLA manufactured Communication Products listed below
(Product) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:
XPR Series Digital Portable Radios Product Accessories (Excluding Batteries, Chargers and Mag One Accessories) Mag One Accessories Two (2) Years One (1) Year Six (6) Months MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. y t n a r r a W d e t i m L i 54 English This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. II. GENERAL PROVISIONS:
This warranty sets forth the full extent of MOTOROLA'S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLAs option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, draft NAG-LACR.book Page 55 Tuesday, March 12, 2013 3:37 PM INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at 1-800-927-2744 US/Canada. i L m i t e d W a r r a n t y V. WHAT THIS WARRANTY DOES NOT COVER:
A) Defects or damage resulting from use of the Product in other than its normal and customary manner. B) Defects or damage from misuse, accident, water, or neglect. C)Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. D)Breakage or damage to antennas unless caused directly by defects in material workmanship. E) A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA's normal warranty inspection and testing of the Product to verify any warranty claim. F) Product which has had the serial number removed or made illegible. G)Rechargeable batteries if:
(1) any of the seals on the battery enclosure of cells are broken or show evidence of tampering.
(2) the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. H)Freight costs to the repair depot. I) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLAs published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. 55 English draft NAG-LACR.book Page 56 Tuesday, March 12, 2013 3:37 PM J) Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. K) Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
A) that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;
B) that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and C)should the Product or parts become, or in MOTOROLAs opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, U.S.A. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability y t n a r r a W d e t i m L i 56 English draft
1 2 3 4 | RF Safety Manual | Users Manual | 3.00 MiB |
6881095C98-H_SafetyP_Eng.fm Page 1 Tuesday, July 24, 2012 1:43 PM RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS ATTENTION!
Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2007 2012 Motorola Solutions, Inc. All rights reserved.
*NNTN7223E*
NNTN7223E Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, U.S.A.
*6881095C98*
6881095C98-H English 6881095C98-H_SafetyP_Eng.fm Page 2 Tuesday, July 24, 2012 1:43 PM RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use NOTICE: This radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. English 2 6881095C98-H_SafetyP_Eng.fm Page 3 Tuesday, July 24, 2012 1:43 PM Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/
www.motorolasolutions.com/rfhealth Federal Communication Commission (FCC) Regulations When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Motorola two-way radio has a RF Exposure Product Label. Also, your Motorola user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standards Your Motorola two-way radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk-50%
listen and is approved for occupational use only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. 3 English 6881095C98-H_SafetyP_Eng.fm Page 4 Tuesday, July 24, 2012 1:43 PM NOTE: The approved batteries, supplied with this radio, are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby) even though this radio complies with FCC occupational exposure limits and may operate at duty factors of up to 50% talk. Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines:
United States Federal Communications Commission (FCC), Code of Federal Regulations; 47 CFR et seq. & FCC, OET Bulletin 65 Institute of Electrical and Electronic Engineers (IEEE) C95.1 International Commission on Non-Ionizing Radiation Protection (ICNIRP) Ministry of Health (Canada) Safety Code 6 & Industry Canada RSS-102 Australian Communications Authority Radiocommunications Standard et seq. ANATEL ANNEX to Resolution No. 303 et seq. RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures. DO NOT remove the RF Exposure Label from the device. User awareness instructions should accompany device when transferred to other users. English 4 6881095C98-H_SafetyP_Eng.fm Page 5 Tuesday, July 24, 2012 1:43 PM Two-Way Radio Operation Transmit no more than the rated duty factor of 50% of the time. To transmit
(talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). In front of the face. Hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips. Keeping the radio at a proper distance is important to ensure compliance. NOTE: RF exposures decrease with increasing distance from the antenna. Body Worn Operation. When worn on the body, always place the radio in a Motorola-approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of non-
Motorola-approved accessories may result in exposure levels, which exceed the occupational/controlled environment RF exposure limits. Use only Motorola-approved supplied or replacement antennas, batteries, and audio accessories. Use of non-Motorola-approved antennas, batteries, and accessories may exceed the applicable RF exposure guidelines (iEEE, ICNIRP or FCC). For a list of Motorola-approved accessories for your radio model, visit the following website: http://www.motorolasolutions.com/governmentandenterprise 5 English 6881095C98-H_SafetyP_Eng.fm Page 6 Tuesday, July 24, 2012 1:43 PM Electromagnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers The Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with those of the U.S. Food and Drug Administration. Persons with pacemakers should:
ALWAYS keep the radio more than 6 inches (15 centimeters) from their pacemaker when the radio is turned ON. Not carry the radio in the breast pocket. Use the ear opposite the pacemaker to minimize the potential for interference. Turn the radio OFF immediately if there is any reason to suspect that interference is taking place. English 6 6881095C98-H_SafetyP_Eng.fm Page 7 Tuesday, July 24, 2012 1:43 PM Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use of Communication Devices While Driving Always check the laws and regulations on the use of radios in the areas where you drive. Give full attention to driving and to the road. Use hands-free operation, if available. Pull off the road and park before making or answering a call, if driving conditions or regulations so require. 7 English 6881095C98-H_SafetyP_Eng.fm Page 8 Tuesday, July 24, 2012 1:43 PM Acoustic Safety Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. To protect your hearing:
Use the lowest volume necessary to do your job. Turn up the volume only if you are in noisy surroundings. Turn down the volume before adding headset or earpiece. Limit the amount of time you use headsets or earpieces at high volume. When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear. Operational Warnings W A R N I N G For Vehicle With Air Bags:
Refer to vehicle manufacturer's manual prior to installation of electronic equipment to avoid interference with air bag wiring. DO NOT place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. English 8 6881095C98-H_SafetyP_Eng.fm Page 9 Tuesday, July 24, 2012 1:43 PM Operational Warnings (Continued) W A R N I N G Potentially Explosive Atmospheres
(Explosive atmospheres refers to hazard classified locations that may contain hazardous gas, vapors, or dusts.) Turn off your radio prior to entering any area with a potentially explosive atmosphere unless it is a portable radio type especially qualified for use in such areas as Intrinsically Safe (for example, Factory Mutual, CSA, UL, or CENELEC). DO NOT remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted. Blasting Caps and Blasting Areas To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: "Turn off two-way radio." Obey all signs and instructions. 9 English 6881095C98-H_SafetyP_Eng.fm Page 10 Tuesday, July 24, 2012 1:43 PM Operational Cautions C a u t i o n Antennas DO NOT use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury, such as burns, if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Intrinsically Safe Radio Information The Intrinsically safe approval unit refers to a product that has been approved as intrinsically safe by an approval agency (for example FM Approvals, CSA, UL, or Cenelec) and certifies that a particular product meets the Agency's applicable intrinsic safety standards for specific types of hazardous classified locations. A portable radio that has been approved for intrinsic safety will have Approval label attached to the radio to identify the unit as being Approved for specified hazardous atmospheres. This label specifies the hazardous Class/Division/Group along with the part number of the battery that must be used. The Intrinsically Safe Approval Label will be located on the portable radio unit. English 10 6881095C98-H_SafetyP_Eng.fm Page 11 Tuesday, July 24, 2012 1:43 PM Operational Cautions for Intrinsic Safe Equipment C a u t i o n DO NOT operate radio communications equipment in a hazardous atmosphere unless it is a type especially qualified (for example, FM, UL, CSA, or CENELEC approved). An explosion or fire may result. DO NOT operate a radio unit that has been approved as intrinsically safe product in a hazardous atmosphere if it has been physically damaged (for example, cracked housing). An explosion or fire may result. DO NOT replace or charge batteries in a hazardous atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion or fire. Warnings for Radios Approved as Intrinsically Safe Radios must ship from the Motorola manufacturing facility with the hazardous atmosphere capability and the intrinsic safety approval labelling (FM, UL, CSA, CENELEC). Radios will not be upgraded to this capability and labeled once they have been shipped to the field. A modification changes the units hardware from its original design configuration. Modifications can only be made by the original product manufacturer. 11 English 6881095C98-H_SafetyP_Eng.fm Page 12 Tuesday, July 24, 2012 1:43 PM W A R N I N G Repair W A R N I N G DO NOT replace or change accessories in a hazardous atmosphere. Contact sparking may occur while installing or removing accessories and cause an explosion or fire. Turn the radio off before removing or installing a battery or accessory. DO NOT disassemble an intrinsically safe product in any way that exposes the internal circuits of the unit. Failure to use an intrinsically safe approved battery or Approved accessories specifically approved for the radio unit may result in the dangerously unsafe condition of an unapproved radio combination being used in a hazardous location. Unauthorized or incorrect modification of the intrinsically safe approved Product will negate the approval rating of the product. Incorrect repair or relabeling of any intrinsically safe Agency-
approved radio could adversely affect the Approval rating of the unit. Use of a radio that is not intrinsically safe in a hazardous atmosphere could result in serious injury or death. REPAIRS FOR MOTOROLA PRODUCTS WITH INTRINSICALLY SAFE APPROVAL ARE THE RESPONSIBILITY OF THE USER. Repairs to a Motorola FM approved radio product should only be done at a location that has been FM audited under the FM 3605 repairs and service standard. Contact Motorola for assistance regarding repairs and service of Motorola intrinsically safe equipment. English 12 6881095C98-H_SafetyP_Eng.fm Page 13 Tuesday, July 24, 2012 1:43 PM A repair constitutes something done internally to the unit that would bring it back to its original condition. Items not considered as repairs are those in which an action is performed on a unit which does not require the outer casing of the unit to be opened in a manner that exposes the internal electrical circuits of the unit. Do Not Substitute Options or Accessories The Motorola communications equipment certified as intrinsically safe by the approving agency, (FM, UL, CSA, CENELEC) is tested as a complete system which consists of the listed agency Approved portable, Approved battery, and Approved accessories or options, or both. This Approved portable and battery combination must be strictly observed. There must be no substitution of items, even if the substitute has been previously Approved with a different Motorola communications equipment unit. Approved configurations are listed by the Approving Agency (FM, UL, CSA, CENELEC). The Intrinsically Safe Approval Label affixed to radio refers to the intrinsically safe classification of that radio product, and the approved batteries that can be used with that system. The manual PN referenced on the Intrinsically Safe Approval Label identifies the approved Accessories and or options that can be used with that portable radio unit. Using a non-Motorola-intrinsically-safe battery and or accessory with the Motorola approved radio unit will void the intrinsically safe approval of that radio unit. 13 English 6881095C98-H_SafetyP_Eng.fm Page 14 Tuesday, July 24, 2012 1:43 PM Notes:
English 14 6881095C98-H_SafetyP_LAS.fm Page 1 Wednesday, July 25, 2012 3:05 PM Folleto de normas de seguridad y exposicin a la energa de RF al usar radios bidireccionales porttiles ATENCIN ANTES DE UTILIZAR ESTA RADIO, LEA ESTA GUA QUE CONTIENE INSTRUCCIONES DE FUNCIONAMIENTO IMPORTANTES SOBRE EL USO SEGURO Y CONSCIENTE DE LA ENERGA DE RADIOFRECUENCIA (RF), Y SU CONTROL PARA CUMPLIR CON LOS ESTNDARES Y NORMAS APLICABLES. MOTOROLA, MOTO, MOTOROLA SOLUTIONS y el logotipo estilizado M son marcas de fabrica o marcas registradas de Motorola Trademark Holdings, LLC y son usadas bajo licencia. Todas otras marcas registradas son la propiedad de sus dueos respectivos. 2007 2012 Motorola Solutions, Inc. Todos los derechos estn reservados. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, EE.UU. Espaol Latinoamericano 6881095C98-H_SafetyP_LAS.fm Page 2 Wednesday, July 25, 2012 3:05 PM Informacin sobre exposicin a la energa de RF y su control, e instrucciones operacionales para uso como herramienta ocupacional AVISO: Este radio est diseado para uso en ambientes ocupacionales controlados donde los usuarios estn plenamente conscientes de la exposicin a la energa de radiofrecuencia a la que estn sujetos, y pueden ejercer control sobre dicha exposicin para satisfacer los lmites para uso ocupacional establecidos en la normas de la FCC y dems normas internacionales. Esta unidad de radio NO est aprobada para la venta al pblico en general en el mercado de consumo masivo. Este radio bidireccional emplea energa electromagntica en el espectro de radiofrecuencia (RF) para permitir las comunicaciones entre dos o ms usuarios distantes. El mismo emplea la energa de radiofrecuencia u ondas de radio para enviar y recibir llamadas. La energa de RF es una forma de energa electromagntica. Este tipo de energa se presenta en otras formas, entre las que se encuentran la luz solar y los rayos X. La energa de RF, sin embargo, no debe confundirse con estas otras formas de energa electromagntica que, cuando son usadas indebidamente, pueden ocasionar daos biolgicos. Niveles muy elevados de rayos X, por ejemplo, pueden producir daos en tejidos y en material gentico. Expertos en las ciencias, la ingeniera, la medicina, la salud y la industria trabajan conjuntamente con diferentes organizaciones con el fin de desarrollar normas que definan lmites prudentes de exposicin a la energa de RF. Estas normas proporcionan los niveles recomendados de exposicin a la RF, tanto para los trabajadores como para el pblico en general. Estos niveles recomendados de exposicin a la RF incluyen mrgenes de seguridad suficientemente amplios. Todos los radios bidireccionales Motorola son diseados, fabricados y probados de manera que aseguren el cumplimiento de los niveles de exposicin a la RF establecidos por organismos pblicos reguladores. Asimismo, los fabricantes recomiendan a los usuarios de radios bidireccionales seguir instrucciones de operacin especficas. Estas instrucciones son importantes, ya que informan a los Espaol Latinoamericano 2 6881095C98-H_SafetyP_LAS.fm Page 3 Wednesday, July 25, 2012 3:05 PM usuarios acerca de la exposicin a la energa de RF y proporcionan procedimientos sencillos para su control. Visite los siguientes sitios Web para obtener ms informacin acerca de qu es la exposicin a la energa de RF y cmo controlar la exposicin para garantizar la observancia de los lmites de exposicin establecidos. http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Regulaciones de la Comisin Federal de Comunicaciones de EE.UU. (FCC) Las normas de la FCC estipulan que los fabricantes de radios porttiles bidireccionales no podrn comercializar sus productos en los EE.UU., a menos que los mismos cumplan con los lmites de exposicin a la energa de RF establecidos por la FCC. Cuando la naturaleza del trabajo requiere el uso de radios bidireccionales, la FCC exige que los usuarios estn totalmente conscientes de los efectos de la exposicin, y que sean capaces de controlar el nivel de exposicin al que se someten, a fin de satisfacer los requisitos laborales. La informacin sobre exposicin puede facilitarse mediante el uso de una etiqueta de producto que remita a los usuarios a la fuente de informacin apropiada. Su radio bidireccional Motorola tiene una etiqueta con informacin acerca de la exposicin a la energa de RF. Adems, en el manual de usuario del producto Motorola, o en un folleto de seguridad separado, se incluye la informacin e instrucciones de operacin necesarias para controlar la exposicin a la energa de RF y para garantizar el cumplimiento de las normas. Conformidad con las normas sobre exposicin a la radiofrecuencia Este radio bidireccional Motorola ha sido diseado y verificado con el fin de garantizar su compatibilidad con las siguientes normas y recomendaciones nacionales e internacionales relacionadas con la exposicin de seres humanos a la energa electromagntica de radiofrecuencia. Este radio cumple con los lmites de exposicin establecidos por el IEEE (FCC) y la ICNIRP para entornos ocupacionales o con control de exposicin a la energa de radiofrecuencia, a niveles de operacin de hasta un 50% (50% transmisin/
50% recepcin), y est aprobado por la FCC para uso como herramienta 3 Espaol Latinoamericano 6881095C98-H_SafetyP_LAS.fm Page 4 Wednesday, July 25, 2012 3:05 PM ocupacional solamente. En lo que respecta a la medicin de energa de RF para la determinacin de conformidad con estas pautas de exposicin, el radio genera energa de RF medible slo cuando est transmitiendo (cuando el usuario est hablando), no cuando est recibiendo (cuando el usuario est oyendo) ni cuando est en espera. NOTA: Las bateras aprobadas que se suministran con este radio soportan un nivel de operacin de 5-5-90 (5% del tiempo transmitiendo, 5% recibiendo y 90%
en espera), aun cuando este radio satisface los lmites de exposicin ocupacional de la FCC y puede trabajar a niveles de operacin de hasta 50% (50% del tiempo transmitiendo). Este radio bidireccional Motorola satisface las siguientes normas y recomendaciones relacionadas con la exposicin a la energa de radiofrecuencia:
Comisin Federal de Comunicaciones de EE.UU. (FCC), Cdigo de Reglamentos Federales; 47 CFR y siguientes Comisin Federal de Comunicaciones de EE.UU. (FCC), Boletn OET 65 Instituto de Ingenieros Elctricos y Electrnicos (IEEE), C95.1 Comisin Internacional para la Proteccin contra la Radiacin No Ionizante
(ICNIRP) Ministerio de Sanidad (Canad), Cdigo de seguridad 6 Industria Canad, RSS-102 Direccin Australiana de Comunicaciones, Normativa de Radiocomunicaciones y siguientes ANATEL, Anexo a la Resolucin n 303 y siguientes Pautas de conformidad y control de la exposicin de RF e instrucciones de operacin Para controlar su exposicin y asegurar la conformidad con los lmites de exposicin en un entorno ocupacional o controlado, observe siempre los procedimientos siguientes:
Espaol Latinoamericano 4 6881095C98-H_SafetyP_LAS.fm Page 5 Wednesday, July 25, 2012 3:05 PM Pautas:
No retire del dispositivo la etiqueta con informacin acerca de la exposicin a la El aparato debe ser acompaado de la informacin sobre la energa de RF cuando el mismo sea transferido a otros usuarios. No use este dispositivo sin antes satisfacer los requisitos operacionales aqu energa de RF. descritos. Instrucciones de operacin No transmita ms del 50% del tiempo, a fin de no sobrepasar el nivel de operacin mximo especificado del 50%. Para transmitir (hablar) presione el botn de transmisin (PTT). Para recibir llamadas, suelte el botn PTT. Es importante no transmitir ms del 50% del tiempo, ya que este radio emite energa de RF medible slo cuando est transmitiendo (en trminos de conformidad con las normas de medicin). Operacin de radios bidireccionales Sostenga el radio en posicin vertical frente a la cara, con el micrfono (y las dems partes del radio, incluida la antena) a una distancia mnima de 2,5 centmetros (1 pulg.) de la nariz y los labios. La antena debe mantenerse apartada de los ojos. Es importante mantener el radio a una distancia adecuada ya que la exposicin a la RF disminuye al aumentar la distancia de la antena. Operacin de la unidad ajustada al cuerpo Cuando use el radio ajustado al cuerpo, colquelo siempre en un clip, sujetador para cinturn, estuche o arns para el cuerpo aprobado por Motorola para uso con este producto. Es importante emplear accesorios aprobados para uso con unidades ajustadas al cuerpo, ya que de otra manera el usuario podra exponerse a niveles de energa de RF superiores a los lmites establecidos por la FCC para entornos ocupacionales o con control de exposicin. No sujete la antena cuando el radio est transmitiendo. El sujetar la antena afecta la calidad de la llamada y podra hacer que el producto de radio funcione a una potencia mayor que la necesaria. 5 Espaol Latinoamericano 6881095C98-H_SafetyP_LAS.fm Page 6 Wednesday, July 25, 2012 3:05 PM No toque la superficie metlica de la antena (en posicin extendida) cuando el radio est transmitiendo. Sentir una sensacin extraa producto de la RF. Accesorios aprobados Use nicamente antenas, bateras y accesorios suministrados por Motorola o reemplazos aprobados por Motorola. Si se emplean antenas, bateras o accesorios no aprobados por Motorola se podran exceder los lmites de exposicin a la energa de radiofrecuencia establecidos por la FCC (IEEE) y por la ICNIRP. Para consultar la lista de accesorios aprobados por Motorola visite el siguiente sitio Web donde encontrar una lista de accesorios adecuados para el modelo del radio en cuestin:
http://www.motorola.com/Business/US-EN/Two-Way+Radios Informacin adicional Para obtener informacin adicional sobre los requisitos de exposicin o sobre capacitacin, visite: http://responsibility.motorolasolutions.com/index.php/
ourapproach/wirelesscommhealth/. Interferencia y compatibilidad electromagntica NOTA: Casi todos los dispositivos electrnicos son susceptibles a la interferencia electromagntica si no cuentan con el debido blindaje, o si no estn diseados o configurados de manera que sean compatibles con este tipo de seales electromagnticas. Installaciones Para evitar problemas de interferencia y/o compatibilidad electromagntica, apague el radio donde haya letreros que as lo establezcan. Por ejemplo, en hospitales e instalaciones de asistencia mdica podran estar usando aparatos sensibles a la energa de RF externa. Espaol Latinoamericano 6 6881095C98-H_SafetyP_LAS.fm Page 7 Wednesday, July 25, 2012 3:05 PM Aeronaves Cuando est a bordo de un avin, apague el radio cuando se le indique. El radio deber ser usado de conformidad con las regulaciones de la lnea area y las instrucciones de la tripulacin. Aparatos mdicos Marcapasos La Asociacin de tecnologa mdica avanzada (AdvaMed, Advanced Medical Technology Association) recomienda mantener una distancia mnima de 15 centmetros (6 pulgadas) entre un radio inalmbrico de mano y un marcapasos. Estas recomendaciones concuerdan con las disposiciones del organismo estadounidense para el control de alimentos y drogas (FDA, Food and Drug Administration). Las personas que utilicen marcapasos deben seguir las siguientes recomendaciones:
Mantener SIEMPRE el radio a una distancia de 15 centmetros (6 pulgadas) como mnimo del marcapasos cuando est encendido el radio. No llevar el radio dentro del bolsillo de la camisa. Utilizar el odo opuesto al marcapasos para minimizar la probabilidad de interferencia. Apagar el radio inmediatamente si sospecha que est produciendo interferencia. Aparatos para correccin auditiva Algunos radios inalmbricos digitales pueden interferir con ciertos aparatos para correccin auditiva. En caso de que exista interferencia, puede consultar con el fabricante del aparato auditivo para explorar posibles alternativas. Otros dispositivos mdicos Si utiliza cualquier otro dispositivo mdico, consulte con el fabricante del dispositivo para determinar si est protegido adecuadamente contra la energa de RF externa. Su mdico podra ayudarle a obtener esta informacin. 7 Espaol Latinoamericano 6881095C98-H_SafetyP_LAS.fm Page 8 Wednesday, July 25, 2012 3:05 PM Uso de dispositivos de comunicaciones durante la conduccin de vehculos Consulte siempre las leyes y reglamentos para el uso de radios en las zonas donde conduce. Preste atencin al camino y a las condiciones de conduccin. Use la facilidad de manos libres, si est disponible. Salga del camino y estacione el vehculo antes de realizar o contestar una llamada, si la situacin lo amerita o si los reglamentos de trnsito as lo estipulan. Seguridad acstica La exposicin a ruidos intensos provenientes de cualquier fuente por perodos de tiempo prolongados podran afectar su capacidad auditiva de forma temporal o permanente. Mientras ms alto sea el volumen del radio, ms pronto podra resultar afectada su capacidad auditiva. El dao auditivo producido por ruidos intensos a veces puede que sea imperceptible al principio, pero puede tener un efecto acumulativo. Para proteger su capacidad auditiva:
Use el menor volumen que le permita realizar sus tareas. Aumente el volumen nicamente cuando est en un entorno ruidoso. Disminuya el volumen antes de conectar un audfono o un auricular. Lmite el tiempo de uso de audfonos o auriculares a alto volumen. Cuando use el radio sin un audfono o auricular, no se coloque el parlante del radio pegado a la oreja. Espaol Latinoamericano 8 6881095C98-H_SafetyP_LAS.fm Page 9 Wednesday, July 25, 2012 3:05 PM Advertencias operacionales ADVERTENCIA Para vehculos equipados con bolsas de aire:
Consulte el manual del fabricante del vehculo antes de instalar un equipo electrnico para evitar interferencia con el cableado de las bolsas de aire. No coloque el radio porttil sobre una bolsa de aire o en el rea de despliegue de la misma. Las bolsas de aire se inflan con mucha fuerza. De haber un radio porttil en el rea de despliegue de la bolsa de aire cuando sta se infle, el radio podra salir proyectado con gran velocidad y ocasionar lesiones graves a los pasajeros. Ambientes potencialmente explosivos
(Los ambientes explosivos son lugares clasificados como peligrosos que pueden contener gases, vapores o polvos peligrosos). Apague el radio cuando est en una atmsfera potencialmente explosiva, salvo que use un tipo de radio porttil especficamente clasificado como intrnsecamente seguro (por ejemplo, por la Factory Mutual Research Corp., CSA, UL o CENELEC) para uso en tales reas. No retire, instale ni cargue bateras en estas reas. Las chispas en atmsferas potencialmente explosivas pueden desencadenar explosiones o incendios, y ocasionar lesiones e incluso la muerte. 9 Espaol Latinoamericano 6881095C98-H_SafetyP_LAS.fm Page 10 Wednesday, July 25, 2012 3:05 PM ADVERTENCIA Entre los entornos potencialmente explosivos mencionados anteriormente se encuentran las reas con combustible, por ejemplo, debajo de la cubierta de barcos, instalaciones de transferencia y almacenamiento de combustible o de productos qumicos, y reas donde el aire contiene productos qumicos o partculas tales como cereales, polvo comn o polvo metlico. En las reas con atmsferas potencialmente explosivas generalmente hay seales de precaucin, aunque no siempre es as. reas de voladuras y explosivos Para evitar una posible interferencia con las operaciones de detonacin, apague el radio cuando est cerca de detonadores elctricos, en un rea de detonaciones o donde haya letreros que indiquen apagar los radios bidireccionales. Obedezca todas las seales e instrucciones. Precauciones operacionales Precaucin Antenas No utilice radios porttiles que tengan la antena daada. Si una antena daada hace contacto con la piel, podra producir una pequea quemadura. Bateras Todas las bateras pueden causar daos materiales, lesiones o quemaduras si un material conductor, por ejemplo, joyas, llaves o cadenas, hace contacto con los terminales expuestos. El material podra cerrar un circuito elctrico (producir un cortocircuito) y tornarse muy caliente. Manipule con cuidado las bateras cargadas, especialmente cuando las lleve dentro de un bolsillo, cartera o envase que contenga objetos metlicos. Espaol Latinoamericano 10 6881095C98-H_SafetyP_LAS.fm Page 11 Wednesday, July 25, 2012 3:05 PM Informacin sobre radios intrnsecamente seguros La unidad aprobatoria de un dispositivo intrnsecamente seguro se refiere a un producto que ha sido aprobado como intrnsecamente seguro por una entidad aprobatoria (por ejemplo, la aprobacin de FMRC, CSA, UL o Cenelec) y certifica que un producto en particular cumple las normas de seguridad intrnseca aplicables de dicha entidad aprobatoria para tipos especficos de lugares clasificados como peligrosos. Todo radio porttil al que se le haya otorgado la aprobacin de seguridad intrnseca deber tener adherida la correspondiente etiqueta de aprobacin que lo identifique como aprobado para uso en los ambientes peligrosos especificados. En dichas etiquetas se establece la Clase/
Divisin/Grupo de riesgo junto con el nmero de parte de la batera que se debe usar. La etiqueta de aprobacin de un dispositivo intrnsecamente seguro deber estar adherida sobre la unidad de radio porttil. Precauciones operacionales para unidades intrnsecamente seguras Precaucin No haga funcionar equipos de radiocomunicaciones en atmsferas peligrosas salvo que los mismos cuenten con las aprobaciones especiales correspondientes (por ejemplo, la aprobacin de FMRC, UL, CSA o CENELEC). De lo contrario, podran producirse explosiones o incendios. No haga funcionar un radio aprobado como intrnsecamente seguro en un ambiente peligroso si dicho radio presenta seales de daos (por ejemplo, la cubierta resquebrajada). De lo contrario, podran producirse explosiones o incendios. No cambie ni reinstale bateras en atmsferas peligrosas. De producirse chispas al instalar o sacar dichas bateras, podran originarse incendios o explosiones. 11 Espaol Latinoamericano 6881095C98-H_SafetyP_LAS.fm Page 12 Wednesday, July 25, 2012 3:05 PM Advertencias en torno a los radios aprobados como intrnsecamente seguros Los radios debern ser enviados por la fbrica de Motorola con la capacidad para funcionar en atmsferas peligrosas y la etiqueta de aprobacin de seguridad intrnseca correspondiente (FMRC, UL, CSA, CENELEC). Los radios no pueden ser actualizados con esta capacidad ni marcados con las etiquetas correspondientes una vez que sean enviados al campo. Toda modificacin alterar la configuracin de diseo original de los componentes de la unidad. Las modificaciones slo podrn ser realizadas por el fabricante del producto original. ADVERTENCIA accesorios. No cambie ni reinstale accesorios en atmsferas peligrosas. De producirse chispas al instalar o sacar accesorios, podran originarse incendios o explosiones. Apague el radio antes de desinstalar o instalar bateras o No desarme una unidad intrnsecamente segura a un nivel tal que los circuitos internos queden al descubierto. Espaol Latinoamericano 12 6881095C98-H_SafetyP_LAS.fm Page 13 Wednesday, July 25, 2012 3:05 PM ADVERTENCIA El no usar una batera o accesorio intrnsecamente seguro aprobado para uso con la unidad de radio correspondiente podra dar lugar a una condicin peligrosa semejante a la producida al usar una combinacin de radio no aprobada en un rea peligrosa. Toda modificacin incorrecta o no autorizada del producto aprobado como intrnsecamente seguro anular la clasificacin del mismo. Toda reposicin de etiqueta o reparacin indebida de cualquier radio aprobado por una entidad aprobatoria de unidades intrnsecamente seguras podra afectar negativamente la clasificacin de la unidad. El uso de un radio que carezca de seguridad intrnseca en atmsferas peligrosas podra ocasionar lesiones graves o la muerte. Reparacin ADVERTENCIA LA REPARACIN DE PRODUCTOS MOTOROLA APROBADOS COMO INTRNSECAMENTE SEGUROS ES RESPONSABILIDAD DEL USUARIO. La reparacin de radios Motorola aprobados por la FMRC debe ser realizada nicamente en lugares supervisados por la FMRC que cumplan las normas de aprobacin FMRC nmero de clase 3605 relativas al servicio y la reparacin. Comunquese con Motorola para obtener asistencia con el servicio y la reparacin de unidades Motorola intrnsecamente seguras. 13 Espaol Latinoamericano 6881095C98-H_SafetyP_LAS.fm Page 14 Wednesday, July 25, 2012 3:05 PM Se entiende por reparacin cualquier operacin realizada en el interior de la unidad a fin de devolverle su condicin original. No se consideran reparaciones aquellas acciones efectuadas para las que no es necesario abrir la cubierta exterior de la unidad de forma que los circuitos elctricos internos de la unidad queden expuestos. No sustituya opciones ni accesorios El equipo de comunicaciones Motorola certificado como intrnsecamente seguro por la entidad aprobatoria (FMRC, UL, CSA, CENELEC) se prueba como un sistema completo, compuesto del radio porttil, batera, accesorios y opciones, todos ellos aprobados por la entidad correspondiente. El uso de esta combinacin aprobada, compuesta de la unidad porttil y la batera, deber observarse estrictamente. No debern usarse componentes sustitutos, aun cuando el sustituto haya sido aprobado previamente para uso con un equipo de comunicaciones Motorola diferente. Las configuraciones aprobadas pueden consultarse en la lista que mantiene la entidad aprobatoria (FMRC, UL, CSA, CENELEC). La etiqueta de aprobacin de seguridad intrnseca adherida al radio identifica la clasificacin de intrnsecamente segura de dicho radio y de las bateras aprobadas que pueden ser usadas con ese sistema. El nmero de parte del manual referido en la etiqueta de aprobacin de seguridad intrnseca identifica los accesorios y/u opciones aprobados que se pueden usar con esa unidad de radio porttil. El no usar una batera o accesorio Motorola intrnsecamente seguro con la unidad de radio Motorola aprobada anular la aprobacin de seguridad intrnseca de dicha unidad de radio. Espaol Latinoamericano 14 6881095C98-H_SafetyP_BP.fm Page 1 Wednesday, July 25, 2012 3:02 PM Folheto de normas de segurana e de exposio energia ATENO de RF para rdios portteis bidirecionais ANTES DE USAR O RDIO, LEIA ESTE GUIA QUE CONTM INSTRUES OPERACIONAIS IMPORTANTES PARA USO SEGURO E CONSCIENTIZAO E CONTROLE DE EXPOSIO ENERGIA DE RADIOFREQUNCIA (RF) PARA CONFORMIDADE COM PADRES E REGULAMENTOS APLICVEIS. MOTOROLA, MOTO, MOTOROLA SOLUTIONS e o logotipo do M estilizado so marcas registradas ou marcas comerciais da Motorola Trademark Holdings, LLC e so usadas mediante licena. Todas as outras marcas registradas so de propriedade de seus respectivos proprietrios. 2007 2012 Motorola Solutions, Inc. Todos os direitos reservados. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, EUA. Portugus Brasileiro 6881095C98-H_SafetyP_BP.fm Page 2 Wednesday, July 25, 2012 3:02 PM Informaes sobre a exposio energia de RF e seu controle, e instrues operacionais para o uso como ferramenta ocupacional AVISO: Este rdio foi projetado para ser usado em ambientes ocupacionais controlados, onde os usurios estejam plenamente conscientes da exposio energia de radiofreqncia a que esto sujeitos e podem exercer o controle sobre tal exposio de modo a satisfazer as exigncias relativas aos limites para o uso ocupacional estabelecidas nas normas da FCC bem como nas demais normas internacionais. Esta unidade de rdio NO aprovada para venda ao pblico em geral no mercado de consumo de massa. Este rdio bidirecional emprega energia eletromagntica no espectro de radiofreqncia (RF) para possibilitar a comunicao entre dois ou mais usurios distantes. O rdio utiliza a energia de radiofreqncia ou ondas de rdio para enviar e receber chamadas. A energia de RF uma forma de energia eletromagntica. Este tipo de energia se apresenta sob outras formas, dentre as quais se incluem a luz solar e os raios X. A energia de RF, contudo, no deve ser confundida com estas outras formas de energia eletromagntica que, quando so usadas indevidamente, podem causar danos biolgicos. Nveis muito elevados de raios X, por exemplo, podem produzir danos aos tecidos e ao material gentico. Especialistas em cincias, engenharia, medicina, sade e indstria tm trabalhado conjuntamente com as diferentes organizaes com a finalidade de desenvolver normas que definem os limites prudentes de exposio energia de RF. Estas normas proporcionam os nveis recomendveis de exposio RF, tanto para os trabalhadores quanto para o pblico em geral. Estes nveis recomendados de exposio energia de RF incluem margens de segurana suficientemente amplas. Todos os rdios bidirecionais Motorola so projetados, fabricados e testados de modo a assegurar o cumprimento dos nveis de exposio RF estabelecidos pelos organismos pblicos reguladores. Alm disto, os fabricantes recomendam aos usurios de rdios bidirecionais que sigam as instrues de operao especficas. Estas instrues so importantes uma vez que informam aos usurios Portugus Brasileiro 2 6881095C98-H_SafetyP_BP.fm Page 3 Wednesday, July 25, 2012 3:02 PM a respeito da exposio energia de RF e oferecem procedimentos simples para seu controle. Visite os websites indicados a seguir para obter mais informaes sobre o que se trata a exposio energia de RF e de como controlar esta exposio, de modo a garantir a observncia dos limites de exposio estabelecidos:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Regulamentos da Comisso Federal de Comunicaes dos EUA
(FCC) As normas da FCC estipulam que os fabricantes de rdios portteis bidirecionais no podero comercializar seus produtos nos Estados Unidos, exceto se tais produtos cumprirem com as exigncias de limites de exposio energia de RF estabelecidos pela FCC. Quando a natureza do trabalho requer o uso de rdios bidirecionais, a FCC exige que os usurios estejam totalmente conscientes dos efeitos da exposio e que sejam capazes de controlar o nvel de exposio a que esto submetidos, de modo a satisfazer as exigncias do trabalho. As informaes sobre exposio podem ser facilitadas por meio do uso de uma etiqueta que remeta os usurios fonte de informaes apropriadas. Seu rdio bidirecional Motorola contm uma etiqueta com informaes sobre a exposio energia de RF. Alm disto, no manual do usurio do produto Motorola, ou em um folheto de segurana publicado em separado, esto includas as informaes e instrues de operao necessrias para controlar a exposio energia de RF e para garantir o cumprimento das normas. Conformidade com as normas relativas exposio energia de radiofreqncia Este rdio bidirecional Motorola foi projetado e testado com a finalidade de garantir a sua compatibilidade com as normas e recomendaes nacionais e internacionais descritas a seguir relativas exposio de seres humanos energia eletromagntica de radiofreqncia: Este rdio atende aos limites de exposio estabelecidos pelo IEEE (FCC) e pela ICNIRP para ambientes ocupacionais ou com controle de exposio energia de radiofreqncia, em nveis de 3 Portugus Brasileiro 6881095C98-H_SafetyP_BP.fm Page 4 Wednesday, July 25, 2012 3:02 PM operao de at 50% (50% transmisso/50% recepo) e foi aprovado pela FCC para uso somente como ferramenta ocupacional. No que se refere medio da energia de RF para a determinao de conformidade com as orientaes de exposio, o rdio irradia energia de RF mensurvel somente quando est em transmisso (quando o usurio est falando) e no quando est recebendo (quando o usurio est ouvindo) ou quando se encontra em espera. NOTA: Embora este rdio atenda aos limites de exposio ocupacional estabelecidos pela FCC para ciclos de trabalho de at 50% (50% do tempo em transmisso), as baterias aprovadas fornecidas com este rdio suportam um ciclo de trabalho de 5-5-90 (5% do tempo em transmisso, 5%
em recepo e 90% em espera). Este rdio bidirecional Motorola satisfaz s seguintes normas e recomendaes relacionadas exposio energia de radiofreqncia:
Comisso Federal de Comunicaes dos Estados Unidos (FCC), Cdigo de Regulamentos Federais; 47 CFR e seguintes Comisso Federal de Comunicaes dos Estados Unidos (FCC), Boletim OET 65 Instituto de Engenheiros Eltricos e Eletrnicos (IEEE) C95.1 Comisso Internacional para Proteo contra Radiao no Ionizante (ICNIRP) Ministrio da Sade (Canad), Cdigo de segurana 6 Indstria Canad, RSS-102 Autoridade Australiana de Comunicaes, Normativa de Radiocomunicaes e seguintes ANATEL, Anexo Resoluo N. 303 e seguintes. Portugus Brasileiro 4 6881095C98-H_SafetyP_BP.fm Page 5 Wednesday, July 25, 2012 3:02 PM Orientaes gerais de conformidade e controle da exposio de RF e instrues de operao Para controlar sua exposio e assegurar a conformidade com os limites de exposio em um ambiente ocupacional ou controlado, procure observar sempre os procedimentos descritos a seguir. Orientaes gerais:
No retire do dispositivo a etiqueta com informaes a respeito da exposio O equipamento deve estar acompanhado das informaes relacionadas com a energia de RF quando o mesmo for transferido a outros usurios. No utilize este dispositivo sem antes satisfazer os requisitos operacionais aqui energia de RF. descritos. Instrues de operao No transmita mais de 50% do tempo, de modo a no ultrapassar o nvel mximo de operao especificado, de 50%. Para transmitir (falar) pressione o boto de transmisso (PTT). Para receber chamadas solte o boto PTT. importante no transmitir mais de 50% do tempo, uma vez que o rdio emite energia de RF mensurvel somente quando est em transmisso (em termos da conformidade com as normas de medio). Operao de rdios bidirecionais Segure o rdio na posio vertical em frente ao rosto, com o microfone (e as demais partes do rdio, incluindo a antena) a uma distncia mnima de 2.5 a 5 centmetros do nariz e dos lbios. A antena deve ser mantida longe dos olhos. importante manter o rdio a uma distncia adequada uma vez que a exposio RF diminui ao se aumentar a distncia at a antena. Operao da unidade ajustada ao corpo Quando utilizar o rdio junto ao corpo, coloque-o sempre em um clipe, suporte de cinto, estojo ou arns para o corpo aprovado pela Motorola para ser usado com este produto. importante utilizar acessrios aprovados para uso com unidades fixadas junto ao corpo, j que de outra forma o usurio poder 5 Portugus Brasileiro 6881095C98-H_SafetyP_BP.fm Page 6 Wednesday, July 25, 2012 3:02 PM exporse a nveis de energia de RF superiores aos estabelecidos pela FCC para ambientes ocupacionais ou com controle de exposio. No segure a antena quando o rdio estiver transmitindo. Ao se segurar a antena, a qualidade da chamada ser afetada. Isso poder fazer com que o rdio funcione em um potncia maior do que a necessria. No toque na superfcie metlica da antena (na posio estendida) quando o rdio estiver transmitindo. Isso poder resultar em um desconforto devido RF. Acessrios aprovados Use somente as antenas, baterias e acessrios fornecidos pela Motorola, ou substitutos aprovados pela Motorola. Caso se utilize antenas, baterias ou acessrios no aprovados pela Motorola, corre-se o risco de exceder os limites de exposio energia de radiofreqncia estabelecidos pela FCC (IEEE) e pela ICNRP. Para obter a lista de antenas aprovadas pela Motorola, viste o website indicado a seguir, o qual contm uma lista de acessrios aprovados para seu modelo de rdio:
http://www.motorola.com/Business/US-EN/Two-Way+Radios Informaes adicionais Para obter informaes adicionais sobre os requisitos de exposio ou sobre treinamento, visite: http://responsibility.motorolasolutions.com/index.php/
ourapproach/wirelesscommhealth/. Interferncia e compatibilidade eletromagntica NOTA: Quase todos os dispositivos eletrnicos so susceptveis interferncia eletromagntica se no estiverem devidamente blindados ou se no tiverem sido projetados ou configurados de maneira a serem compatveis com estes tipos de sinais eletromagnticos. Edificaes Para evitar problemas de interferncia e/ou de compatibilidade eletromagntica, desligue o rdio em todos os locais onde houver avisos instruindo neste sentido. Portugus Brasileiro 6 6881095C98-H_SafetyP_BP.fm Page 7 Wednesday, July 25, 2012 3:02 PM Por exemplo, em hospitais e estabelecimentos de assistncia mdica podem estar utilizando equipamentos sensveis energia de RF externa. Aeronaves Quando estiver a bordo de uma aeronave, desligue o rdio quando for solicitado a faz-lo. Quando estiver utilizando o rdio, proceda em conformidade com os regulamentos da companhia area e segundo as instrues da tripulao. Dispositivos mdicos Marca-passos A Associao de Tecnologia Mdica Avanada (AdvaMed, Advanced Medical Technology Association) recomenda que se mantenha uma distncia mnima de 15 centmetros (6 polegadas) entre um rdio de mo sem fio e um marca-passo. Estas recomendaes so consistentes com as disposies da agncia norte-americana para o controle de alimentos e medicamentos (FDA, Food and Drug Administration). As pessoas que utilizam marca-passos devem seguir as recomendaes descritas a seguir:
Manter SEMPRE o rdio a uma distncia mnima de 15 centmetros do marcapasso quando o rdio estiver ligado. No carregar o rdio dentro do bolso da camisa. Utilizar o ouvido oposto ao marca-passo para minimizar a possibilidade de Desligar o rdio imediatamente se houver suspeita de que o mesmo esteja interferncia. produzindo interferncia. Aparelhos para correo auditiva Alguns rdios digitais sem fio podem interferir com certos aparelhos para correo auditiva. No caso de ocorrer interferncia, pode-se consultar o fabricante do dispositivo para obter possveis alternativas. 7 Portugus Brasileiro 6881095C98-H_SafetyP_BP.fm Page 8 Wednesday, July 25, 2012 3:02 PM Outros dispositivos mdicos Caso esteja utilizando qualquer outro dispositivo mdico, consulte o fabricante do dispositivo para determinar se o mesmo se encontra adequadamente protegido contra a energia de RF externa. Seu mdico poder lhe auxiliar na obteno desta informao. Uso de dispositivos de comunicaes quando na direo de um veculo. Consulte sempre as leis e regulamentos de trnsito referentes ao uso de rdios nos locais em que estiver dirigindo. Preste ateno ao volante quando estiver dirigindo. Use o modo mos-livres, se este recurso estiver disponvel. Saia da pista e estacione antes de fazer ou receber uma chamada, se as condies ou os regulamentos de trnsito assim o exigirem. Segurana acstica A exposio a rudos intensos provenientes de qualquer fonte durante perodos de tempo prolongados poder afetar a sua capacidade auditiva temporariamente ou de forma permanente. Quanto mais alto for o volume sonoro do rdio, mais rapidamente sua capacidade auditiva poder ser afetada. O dano auditivo produzido por rudos intensos s vezes poder ser imperceptvel em um primeiro momento. Porm, ele tende a se tornar um efeito cumulativo. Para proteger a sua capacidade auditiva:
Use a menor intensidade de volume que permita a realizao de suas tarefas. Aumente o volume somente quando estiver em um ambiente ruidoso. Abaixe o volume antes de conectar um fone de ouvido ou acessrio auricular. Limite o tempo de uso de fones de ouvido ou de acessrios auriculares em volume alto. Quando estiver utilizando o rdio sem um fone de ouvido ou acessrio auricular, no coloque o alto-falante do rdio muito prximo ao ouvido. Portugus Brasileiro 8 6881095C98-H_SafetyP_BP.fm Page 9 Wednesday, July 25, 2012 3:02 PM Advertncias operacionais ATENO Para veculos equipados com airbags:
Consulte o manual do fabricante do veculo antes de instalar um equipamento eletrnico, de modo a evitar interferncia com a fiao do airbag. No coloque um rdio porttil ou mvel sobre um airbag nem na rea prxima expanso do mesmo. O air bag se expande com grande intensidade. Se houver um rdio porttil na rea de expanso do air bag quando da expanso do mesmo, o rdio poder ser lanado com grande velocidade e causar leses graves aos passageiros. Ambientes potencialmente explosivos
(Os ambientes explosivos so locais classificados como perigosos, que podem conter gases, vapores ou partculas). Desligue o rdio quando estiver em um ambiente potencialmente explosivo, exceto se estiver utilizando um tipo de rdio porttil especificamente classificado como intrinsecamente seguro (por exemplo, pela Factory Mutual Research Corp., CSA, UL ou CENELEC) para uso em tais reas. No remova, no instale nem recarregue as baterias nestas reas. As fascas lanadas em ambientes potencialmente explosivas podem causar uma exploso ou incndio e resultar em leses graves ou inclusive fatais. 9 Portugus Brasileiro 6881095C98-H_SafetyP_BP.fm Page 10 Wednesday, July 25, 2012 3:02 PM ATENO Dentre os ambientes potencialmente explosivos mencionados anteriormente, esto as reas com combustveis situadas, por exemplo, na parte inferior de embarcaes, instalaes de transferncia e armazenamento de combustveis ou de produtos qumicos, e reas onde o ar possa conter produtos qumicos ou partculas tais como gros, poeira comum ou poeira metlica. As reas com ambientes potencialmente explosivos geralmente contm avisos de advertncia, embora nem sempre seja assim. reas de detonao e exploso Para evitar uma possvel interferncia com as operaes de detonao, desligue o rdio quando estiver prximo de detonadores eltricos, em reas de detonao ou onde houver avisos indicando para desligar os rdios bidirecionais. Siga todos os avisos e instrues. Precaues operacionais Precauo Antenas No utilize rdios portteis que estejam com a antena danificada. Se uma antena danificada entrar em contato com a pele, poder produzir uma pequena queimadura. Baterias Todas as baterias podem causar danos materiais, leses ou queimaduras se um material condutor, como por exemplo jias, chaves ou chaveiros metlicos entrar em contato com os terminais expostos. O material pode fechar um circuito eltrico (produzir um curto-circuito) e ficar muito aquecido. Manuseie as baterias com cuidado, especialmente quando estiver carregando-as no bolso, na bolsa ou em algum outro objeto pessoal que contenha objetos metlicos. Portugus Brasileiro 10 6881095C98-H_SafetyP_BP.fm Page 11 Wednesday, July 25, 2012 3:02 PM Informaes sobre rdios intrinsecamente seguros A unidade de aprovao de um dispositivo como sendo intrinsecamente seguro se refere a um produto que tenha sido aprovado como intrinsecamente seguro por uma entidade de aprovao (por exemplo, a aprovao da FMRC, CSA, UL ou Cenelec) e atesta que um produto especfico cumpre com as normas de segurana intrnseca aplicveis da referida entidade de aprovao para tipos especficos de lugares classificados como perigosos. Todo o rdio porttil para o qual se tenha outorgado a aprovao de segurana intrnseca dever exibir a correspondente etiqueta de aprovao que o identifique como sido aprovado para uso nos ambientes perigosos classificados. Nas referidas etiquetas se estabelece a Classe/Diviso/Grupo de risco juntamente com o modelo da bateria que se deve utilizar. A etiqueta de aprovao de um dispositivo intrinsecamente seguro dever estar afixada sobre a unidade de rdio porttil. Precaues operacionais para unidades intrinsecamente seguras. Precauo Equipamentos de radiocomunicao no devem ser colocados em funcionamento estando em atmosferas de risco, exceto se tais equipamentos contarem com as aprovaes especiais correspondentes (por exemplo, a aprovao da FMRC, UL, CSA ou CENELEC). Caso contrrio, poder resultar em incndio ou exploses. No opere um rdio aprovado como intrinsecamente seguro em um ambiente perigoso se o referido rdio apresentar sinais de danos (por exemplo, rachaduras em sua estrutura). Caso contrrio, poder resultar em incndio ou exploses. No troque nem reinstale baterias em reas classificadas. As pequenas fascas produzidas quando da insero ou retirada das baterias podero causar incndios ou exploses. 11 Portugus Brasileiro 6881095C98-H_SafetyP_BP.fm Page 12 Wednesday, July 25, 2012 3:02 PM Advertncias para rdios aprovados como intrinsecamente seguros. Os rdios devem ser enviados da fbrica da Motorola caapcitados para funcionar em reas classificadas e contendo a etiqueta de aprovao de segurana intrnseca correspondente (FMRC, UL, CSA, CENELEC). Os rdios no podem ser modificados de modo a incorporar este recurso e identificados com a etiqueta de aprovao, uma vez que tenham sido enviados a campo. Toda modificao ir alterar a configurao do projeto original dos componentes da unidade. As modificaes somente podero ser realizadas pelo fabricante do produto original. No troque nem reinstale acessrios em reas classificadas As pequenas fascas produzidas no momento da insero ou retirada dos acessrios podero causar incndios ou exploses. Desligue o Rdio/Comunicador antes de remover ou instalar ATENO baterias ou acessrios. No desmonte um produto intrinsecamente seguro de modo que seus circuitos internos fiquem expostos. Portugus Brasileiro 12 6881095C98-H_SafetyP_BP.fm Page 13 Wednesday, July 25, 2012 3:02 PM ATENO Reparo ATENO O uso de uma bateria ou acessrio intrinsecamente seguro no aprobado para a utilizao com a unidade de rdio correspondente, poder resultar em uma condio de perigo semelhante quela produzida ao se utilizar uma combinao de rdio no aprovado em uma rea perigosa. Toda modificao incorreta ou no autorizada de um produto intrinsecamente seguro acarretar na anulao da classificao segura do mesmo. A substituio da etiqueta ou reparo incorreto de qualquer produto aprovado por uma entidade certificadora de produto intrinsecamente seguro poder afetar negativamente o grau de classificao da unidade. O uso de um rdio que no seja intrinsecamente seguro em reas classificadas poder acarretar leses graves ou mesmo fatais. O REPARO DE PRODUTOS MOTOROLA APROVADOS COMO INTRINSECAMENTE SEGUROS DE RESPONSABILIDADE DO USURIO. O reparo de rdios Motorola aprovados pela FMRC deve ser realizado somente em locais supervisionados pela FMRC que cumpram com as normas de aprovao FMRC nmero de classe 3605, relativas ao servio de manuteno e reparo. Entre em contato com a Motorola para obter orientao quanto aos servios e reparos de unidades Motorola intrinsecamente seguras. 13 Portugus Brasileiro 6881095C98-H_SafetyP_BP.fm Page 14 Wednesday, July 25, 2012 3:02 PM Um reparo consiste em algo realizado no interior da unidade com a finalidade de reconstituir sua condio original. No so considerados reparos aquelas aes para as quais no seja necessrio abrir o invlucro exterior da unidade de forma que os circuitos eltricos internos da unidade fiquem expostos. No substitua os itens opcionais nem os acessrios. O equipamento de comunicaes Motorola certificado como intrinsecamente seguro pela entidade de aprovao (FMRC, UL, CSA, CENELEC) testado como um sistema completo, composto pelo rdio porttil, bateria, acessrios e itens opcionais, todos eles aprovados pela entidade correspondente. O uso desta combinao aprovada de unidade porttil e bateria dever ser estritamente observado. No se deve utilizar componentes substitutos, mesmo quando o elemento substituto tenha sido previamente aprovado para o uso com outros equipamentos de comunicaes da Motorola. As configuraes aprovadas podem ser consultadas na lista mantida pela entidade de aprovao (FMRC, UL, CSA, CENELEC). A etiqueta de aprovao de segurana intrnseca afixada ao rdio identifica o grau de classificao de intrinsecamente seguro do referido rdio e das baterias aprovadas que podem ser usadas com este sistema. O modelo do manual mencionado na etiqueta de aprovao de segurana intrnseca identifica os acessrios e/ou itens opcionais aprovados que podem ser usados com esta unidade de rdio porttil. O uso de uma bateria ou acessrio diferente de uma bateria ou acessrio Motorola intrinsecamente seguro com a unidade de rdio Motorola aprovada ir acarretar na anulao da aprovao de segurana intrnseca da referida unidade de rdio. Portugus Brasileiro 14 6881095C98-H_SafetyP_FrCan.fm Page 1 Wednesday, July 25, 2012 3:04 PM Brochure Normes de scurit et exposition lnergie de RF pour lutilisation des radios bidirectionnelles portatives ATTENTION AVANT DUTILISER CETTE RADIO, LISEZ CE GUIDE, QUI CONTIENT DIMPORTANTES INSTRUCTIONS DE FONCTIONNEMENT POUR UNE UTILISATION SCURITAIRE ET DES INFORMATIONS SUR LEXPOSITION AUX FRQUENCES RADIOLECTRIQUES, DANS LE BUT DASSURER VOTRE CONFORMIT AUX NORMES ET RGLEMENTS EN VIGUEUR. MOTOROLA, MOTO, MOTOROLA SOLUTIONS et le logo M stylis sont des marques de commerce ou des marques enregistres de Motorola Trademark Holdings, LLC et sont utilises sous licence. Toutes les autres marques de commerce appartiennent leurs propritaires respectifs. 2007 2012 Motorola Solutions, Inc. Tous droits rservs. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, tats-Unis. Franais Canadien 6881095C98-H_SafetyP_FrCan.fm Page 2 Wednesday, July 25, 2012 3:04 PM Informations sur lexposition lnergie de RF et son contrle, et mode demploi pour un usage en tant quoutil professionnel AVIS :
Cette radio a t conue pour tre utilise dans des environnements professionnels contrls, dans lesquels les utilisateurs sont pleinement conscients de lexposition lnergie de RF laquelle ils sont soumis et peuvent exercer un contrle sur cette exposition afin de respecter les limites tablies pour lusage professionnel par le FCC et autres normes internationales. Ce dispositif radio nest PAS autoris pour un usage grand public. Cette radio bidirectionnelle utilise de lnergie lectromagntique dans le spectre de radiofrquence (RF) afin de permettre les communications distance entre deux utilisateurs ou plus. Elle utilise lnergie de radiofrquence ou les ondes radio pour mettre et recevoir des appels. Lnergie de RF est une forme dnergie lectromagntique. Ce type dnergie se prsente sous dautres formes, notamment la lumire solaire et les rayons X. Il ne faut cependant pas confondre lnergie de RF avec dautres formes dnergie lectromagntique qui, lorsquelles sont mal utilises, peuvent occasionner des dommages biologiques. Des niveaux trs levs de rayons X, par exemple, peuvent endommager les tissus et le matriel gntique. Les experts en science, en ingnierie, en mdecine, en sciences de la sant et de lindustrie travaillent en collaboration avec diffrentes organisations afin dlaborer des normes dfinissant les limites acceptables dexposition lnergie de RF. Ces normes fournissent les niveaux recommands dexposition aux RF, tant pour les travailleurs que pour le public en gnral. Ces niveaux recommands dexposition aux RF comprennent des marges de scurit apprciables. Franais Canadien 2 6881095C98-H_SafetyP_FrCan.fm Page 3 Wednesday, July 25, 2012 3:04 PM Toutes les radios bidirectionnelles Motorola sont conues, fabriques et testes de manire garantir leur conformit aux niveaux dexposition aux RF tablis par les autorits publiques comptentes. Par ailleurs, les fabricants recommandent aussi aux utilisateurs de radios bidirectionnelles de suivre des consignes dutilisation spcifiques. Ces consignes sont importantes puisquelles informent les utilisateurs sur lexposition lnergie de RF et proposent des moyens simples pour la contrler. Visitez les sites Web suivants pour obtenir plus de renseignements sur ce quest lexposition lnergie de RF et sur les mesures de contrle observer afin de respecter les limites tablies en matire dexposition aux RF :
http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Rgulations du conseil fdral amricain des communications (FCC) Les normes du FCC exigent des fabricants de radios mobiles bidirectionnelles qui les commercialisent aux tats-Unis, quelles soient conformes aux limites dexposition lnergie de RF tablies par le FCC. Lorsque les radios bidirectionnelles sont utilises des fins professionnelles, le FCC exige des utilisateurs quils soient pleinement conscients et capables de contrler le niveau dexposition auquel ils se soumettent, afin de rpondre aux exigences de leur profession. Vous pouvez contribuer la sensibilisation lexposition aux RF en apposant des tiquettes renvoyant les utilisateurs vers la source dinformation approprie. Votre radio bidirectionnelle Motorola comporte une tiquette de produit sur lexposition lnergie de RF. Dautre part, vous trouverez dans le manuel de lutilisateur du produit Motorola ou dans la brochure de scurit fournie sparment, les informations et le mode demploi requis pour contrler lexposition lnergie de RF et garantir le respect des normes. 3 Franais Canadien 6881095C98-H_SafetyP_FrCan.fm Page 4 Wednesday, July 25, 2012 3:04 PM Conformit aux normes dexposition lnergie de RF Cette radio bidirectionnelle Motorola a t conue et teste afin de garantir sa conformit plusieurs normes et recommandations nationales et internationales
(voir plus bas) lies lexposition des tres humains lnergie lectromagntique de radiofrquence. Cette radio respecte les limites dexposition tablies par lIEEE (FCC) et lICNIRP pour les environnements professionnels ou avec contrle dexposition lnergie de radiofrquence, des cycles de travail allant jusqu 50 % (50 % transmission/50 % rception) et est approuve par le FCC pour un usage exclusivement professionnel. En ce qui concerne la mesure de lnergie de RF pour valuer la conformit aux normes dexposition du FCC, la radio met de lnergie de RF mesurable seulement lorsquelle est en cours dmission (conversation), et non pas lorsquelle reoit (coute) ou lorsquelle est au repos. REMARQUE : Les batteries approuves, fournies pour cette radio, supportent un cycle de travail de 5-5-90 (5 % du temps en transmission5 % en rception90 % au repos), mme si la radio respecte les limites dexposition professionnelle du FCC des cycles de travail allant jusqu 50 % de conversation. Cette radio bidirectionnelle Motorola est conforme aux normes et aux lignes directrices suivantes relatives lexposition lnergie de RF :
Conseil fdral amricain des communications (FCC), Code de la rglementation fdrale ; 47CFR et suiv. Conseil fdral amricain des communications (FCC), Bulletin OET 65 Institut des ingnieurs lectriciens et lectroniciens (IEEE), C95.1 Comit international pour la protection contre les radiations non ionisantes
(ICNIRP) Ministre de la sant (Canada), Code de scurit 6 Industrie Canada, RSS-102 Franais Canadien 4 6881095C98-H_SafetyP_FrCan.fm Page 5 Wednesday, July 25, 2012 3:04 PM Direction australienne de communications, norme de radiocommunications, et suiv. Annexe dANATEL la rsolution No. 303 et suiv. Directives en matire de conformit et de contrle dexposition aux RF et consignes de fonctionnement Pour contrler votre exposition et garantir la conformit aux limites dexposition lnergie des environnements professionnels ou contrls, respectez toujours les procdures suivantes. Consignes :
NE dcollez PAS ltiquette sur lexposition lnergie de RF du dispositif. Lorsque lappareil est cd dautres utilisateurs, il doit tre accompagn des informations de sensibilisation des utilisateurs. Nutilisez pas cet appareil si les conditions de fonctionnement dcrites ici ne sont pas runies. Mode demploi Nmettez pas plus de 50 % du temps afin de ne pas dpasser le cycle maximal de travail spcifi. Pour mettre (parler) appuyez sur le bouton de transmission
(PTT). Pour recevoir les appels, relchez le bouton de transmission. Il est important de ne pas mettre plus de 50 % du temps tant donn que cette radio gnre une nergie de RF dont lexposition nest mesurable que lors de lmission (en termes de conformit aux normes de mesure). Fonctionnement des radios bidirectionnelles Maintenez la radio en position verticale face vous de faon ce que le microphone (ainsi que les autres parties de la radio, antenne comprise) se trouvent une distance dau moins 2,5 5 centimtres (un deux pouces) de votre nez ou de vos lvres. Lantenne doit tre oriente loin des yeux. Il est important que la radio demeure une distance convenable, tant donn que les expositions lnergie de RF diminuent au fur et mesure que la distance qui vous spare de lantenne augmente. 5 Franais Canadien 6881095C98-H_SafetyP_FrCan.fm Page 6 Wednesday, July 25, 2012 3:04 PM Fonctionnement de lunit ajuste au corps Lorsque vous utilisez la radio ajuste au corps, Utilisez toujours un clip, une attache de ceinture, placez-la toujours dans un tui ou dans un harnais pour le corps approuv par Motorola pour ce produit. Il est important dutiliser des accessoires ajusts au corps approuvs, sinon lutilisateur risque de sexposer des niveaux dnergie de RF suprieurs aux limites tablies par le FCC pour les environnements professionnels ou exposition contrle. NE tenez PAS lantenne lorsque la radio est en train dmettre. Le fait de tenir lantenne affecte la qualit de lappel et la radio risque alors de fonctionner un niveau de puissance plus lev que ncessaire. NE touchez PAS la surface mtallique de lantenne (en position dplie) lorsque la radio est en train dmettre. Vous risquez de sentir un malaise occasionne par la radiofrquence. Accessoires Approuvs Utilisez uniquement les antennes, les batteries et les accessoires fournis ou de rechange agrs Motorola. En utilisant des antennes, des batteries ou des accessoires non approuvs par Motorola vous risquez de dpasser les limites dexposition lnergie de RF tablies par le FCC (IEEE) et par lICNIRP. Pour obtenir une liste daccessoires approuvs par Motorola, visitez le site Web suivant qui rpertorie les accessoires approuvs pour ce modle de radio :
http://www.motorola.com/Business/US-EN/Two-Way+Radios Informations complmentaires Pour obtenir plus de renseignements sur les exigences en matire dexposition ou dautres informations de formation, visitez le site: http://
responsibility.motorolasolutions.com/index.php/ourapproach/wirelesscommhealth/. Franais Canadien 6 6881095C98-H_SafetyP_FrCan.fm Page 7 Wednesday, July 25, 2012 3:04 PM Interfrence et compatibilit lectromagntique REMARQUE : La grande majorit des dispositifs lectroniques sont sensibles leffet lectromagntique perturbateur (EMI) sils ne sont pas convenablement protgs ou sils ne sont pas conus ou configurs de telle sorte quils soient compatibles avec ce type de signaux lectromagntiques. Btiments Afin dviter des problmes dinterfrence et/ou de compatibilit lectromagntique, teignez la radio lorsque cette consigne est affiche sur un panneau. Il se peut, par exemple, que les hpitaux ou les tablissements de sant utilisent des appareils sensibles lnergie de RF externe. Aronefs bord dun avion, teignez la radio lorsque lquipage vous le demande. Toute utilisation de la radio doit se faire conformment aux rglementations en vigueur de la compagnie arienne et sur instructions de lquipage. Dispositifs mdicaux Stimulateurs cardiaques LAssociation de technologie mdicale avance (AdvaMed, Advanced Medical Technology Association) recommande de conserver une distance minimale de 15 centimtres (6 pouces) entre une radio mobile sans fil et un stimulateur cardiaque. Ces recommandations concordent avec les dispositions de loffice amricain de contrle des produits pharmaceutiques et alimentaires (FDA, Food and Drug Administration). Les personnes utilisant des stimulateurs cardiaques doivent suivre les recommandations suivantes :
TOUJOURS maintenir la radio une distance minimale de 15 centimtres (6 pouces) du stimulateur cardiaque lorsquelle est allume. Ne pas porter la radio dans la poche-portefeuille de son vtement. 7 Franais Canadien 6881095C98-H_SafetyP_FrCan.fm Page 8 Wednesday, July 25, 2012 3:04 PM Utiliser loreille oppose au stimulateur cardiaque afin de rduire au maximum le risque dinterfrence. teindre la radio immdiatement si vous avez des raisons de penser quil existe une interfrence quelconque. Aides auditives Certaines radios numriques sans fil peuvent interfrer avec certains types daides auditives. En cas dinterfrence, il est prfrable de consulter le fabricant de laide auditive afin de chercher des solutions de remplacement. Autres dispositifs mdicaux Si vous utilisez tout autre dispositif mdical personnel, consultez le fabricant du dispositif afin de dterminer sil est convenablement protg contre lnergie de RF externe. Votre mdecin peut vous aider obtenir cette information. Utilisation de dispositifs de communication pendant la conduite dun vhicule Consultez toujours la lgislation et les rglementations en vigueur sur lutilisation des radios dans les zones o vous conduisez. Concentrez-vous entirement sur votre conduite et sur la route. Utilisez le mode mains libres, sil est disponible. Rangez-vous sur le bas-ct et stationnez votre vhicule avant de faire ou de rpondre un appel, si les conditions de conduite ou les rgles de circulation lexigent. Scurit acoustique L'exposition des bruits forts de n'importe quelle source pendant de longues priodes peut affecter temporairement ou de manire permanente votre audition. Plus le volume de la radio est lev, plus votre audition risque de se dtriorer rapidement. Les dommages auditifs causs par des bruits forts sont parfois indtectables au dbut et peuvent avoir un effet cumulatif. Pour protger votre audition :
Franais Canadien 8 6881095C98-H_SafetyP_FrCan.fm Page 9 Wednesday, July 25, 2012 3:04 PM Rglez le volume au plus bas niveau possible ncessaire pour effectuer votre travail. volumes. N'augmentez le volume que si vous tes dans un environnement bruyant. Baissez le volume avant d'utiliser un casque ou des oreillettes. Utilisez le moins longtemps possible un casque ou des oreillettes de forts Lorsque vous utilisez la radio sans casque ou oreillettes, ne placez pas le haut-parleur de la radio directement sur votre oreille. 9 Franais Canadien 6881095C98-H_SafetyP_FrCan.fm Page 10 Wednesday, July 25, 2012 3:04 PM Avertissements de fonctionnement AVERTISSEMENT Pour les vhicules quips de sacs gonflables :
Consultez le manuel du fabricant du vhicule avant dinstaller un quipement lectronique, afin dviter toute interfrence avec le cblage des sacs gonflables. vitez de placer une radio portable dans la zone situe au-dessus dun sac gonflable ou dans la zone de dploiement de ce dernier. Les sacs gonflables se dploient avec une force considrable. Si une radio portable se trouve dans la zone de dploiement du sac lorsque celui-ci se gonfle, la radio peut tre propulse avec une force considrable et risque alors doccasionner de graves lsions corporelles aux passagers du vhicule. Atmosphres potentiellement explosives
(Les atmosphres explosives sont des endroits classifis comme dangereux, pouvant contenir des vapeurs, des poudres ou des gaz dangereux). teignez la radio avant de pntrer dans une atmosphre potentiellement explosive, moins que vous nutilisiez une radio portable spcialement classifie scurit intrinsque (par exemple, par la Factory Mutual Research Corp., CSA, UL ou CENELEC) pour une utilisation dans ce type de zones). vitez de retirer, dinstaller ou de charger des batteries dans ces zones. La moindre tincelle dans ce type datmosphre peut provoquer une explosion ou un incendie et entraner des lsions corporelles ou mme la mort. Franais Canadien 10 6881095C98-H_SafetyP_FrCan.fm Page 11 Wednesday, July 25, 2012 3:04 PM AVERTISSEMENT Parmi les zones potentiellement explosives mentionnes plus haut, citons les zones davitaillement en carburant, par exemple la cale des bateaux, les installations de transfert et de stockage de carburant ou de produits chimiques et les zones dans lesquelles lair est charg en produits chimiques ou en particules telles que de la poudre de crales, de la poussire ou des poudres mtalliques. Les zones atmosphres potentiellement explosives affichent gnralement des panneaux de mise en garde, mais ce nest pas toujours le cas. Dtonateurs et zones de dynamitage Afin dviter une ventuelle interfrence avec les oprations de dtonation, teignez la radio proximit de dtonateurs lectriques, dans une zone de dtonations ou l o sont affichs des panneaux vous invitant teindre les radios bidirectionnelles. Respectez tous les panneaux et toutes les consignes. 11 Franais Canadien 6881095C98-H_SafetyP_FrCan.fm Page 12 Wednesday, July 25, 2012 3:04 PM Prcautions demploi Prcaution Antennes VITEZ dutiliser une radio portable quelle quelle soit si lantenne est endommage. Le contact dune antenne endommage avec la peau peut provoquer une lgre brlure. Batteries Toutes les batteries peuvent occasionner des dommages matriels et/ou des lsions corporelles telles que des brlures si un matriel conducteur comme des bijoux, des cls ou des chanettes perles entrent en contact avec les bornes exposes. Le matriel conducteur risque de fermer un circuit lectrique (court-circuit) et de devenir trs chaud. Manipulez avec prcaution les batteries charges, en particulier lorsque vous les placez dans une poche, un sac main ou tout autre endroit contenant des objets mtalliques. Informations sur les radios scurit intrinsque Lunit dhomologation dun dispositif scurit intrinsque fait rfrence un produit qui a t approuv de scurit intrinsque par une entit dhomologation
(par exemple, lhomologation FMRC, CSA, UL ou Cenelec) et qui certifie quun produit spcifique rpond aux normes de scurit intrinsque applicables de ladite entit dhomologation, pour des types de sites spcifiques classifis comme dangereux. Toute radio portable ayant t approuve de scurit intrinsque doit porter ltiquette dhomologation correspondante qui lidentifie comme tant agre pour un usage dans des atmosphres dangereuses spcifies. Ltiquette spcifie la catgorie de risque laquelle correspond la batterie (Classe/Division/Groupe), ainsi que le numro de rfrence de la batterie qui doit tre utilise. Ltiquette dhomologation dun dispositif de scurit intrinsque doit tre appose sur lunit de radio portable. Franais Canadien 12 6881095C98-H_SafetyP_FrCan.fm Page 13 Wednesday, July 25, 2012 3:04 PM Prcautions de fonctionnement pour les units scurit intrinsque Prcaution VITEZ de faire fonctionner des quipements de radiocommunications dans des atmosphres dangereuses, moins quil ne sagisse dun type spcialement qualifi (par exemple, homologu FMRC, UL, CSA ou CENELEC). Vous risquez de provoquer une explosion ou un incendie. Nutilisez pas une radio approuve de scurit intrinsque dans une atmosphre dangereuse si la radio prsente des signes dendommagement (par exemple, un botier fendu). Vous risquez de provoquer une explosion ou un incendie. VITEZ de remplacer ou de charger des batteries dans une atmosphre dangereuse. La production dtincelles lors de linstallation ou de lextraction des batteries, prsente un risque dincendie ou dexplosion. 13 Franais Canadien 6881095C98-H_SafetyP_FrCan.fm Page 14 Wednesday, July 25, 2012 3:04 PM Avertissements concernant les radios approuves de scurit intrinsque Les radios doivent tre expdies par lusine de production Motorola avec la capacit de fonctionnement en atmosphres dangereuses et ltiquette dhomologation de scurit intrinsque correspondante (FMRC, UL, CSA, CENELEC). Les radios ne peuvent pas tre mises niveau vers cette fonctionnalit ni tre tiquetes une fois quelles ont t envoyes sur le terrain. Toute modification change la configuration du modle dorigine des composants de lunit. Les modifications ne peuvent tre effectues que par le fabricant du produit dorigine. VITEZ de remplacer ou de changer des accessoires dans une atmosphre dangereuse. Des tincelles peuvent se produire lors de linstallation ou de lextraction des accessoires et provoquer un incendie ou une explosion. teignez la radio avant dextraire ou dinstaller une batterie ou AVERTISSEMENT un accessoire. VITEZ de dmonter une unit approuve de scurit intrinsque de telle sorte que les circuits lectriques intgrs soient dcouvert. Franais Canadien 14 6881095C98-H_SafetyP_FrCan.fm Page 15 Wednesday, July 25, 2012 3:04 PM AVERTISSEMENT Lutilisation dune batterie scurit intrinsque ou daccessoires ntant pas spcifiquement approuvs pour lunit de radio correspondante peut engendrer une situation dangereuse similaire lutilisation dune radio non approuve dans une zone dangereuse. Toute modification incorrecte ou non approuve du produit agr scurit intrinsque, annulera la classification de ce dernier. Toute rparation ou remplacement dtiquette incorrect dune radio quelconque homologu par une autorit dhomologation dunits scurit intrinsque peut compromettre lhomologation de lunit. Lutilisation dans une atmosphre dangereuse dune radio ne rpondant pas aux normes de scurit intrinsque peut occasionner des lsions graves, voire mortelles. Rparation AVERTISSEMENT LA RPARATION DE PRODUITS MOTOROLA HOMOLOGU DE SCURIT INTRINSQUE EST LA RESPONSABILIT DE LUTILISATEUR. La rparation dune radio Motorola homologu par la FMRC doit tre exclusivement effectue dans des locaux superviss par la FMRC rpondant aux normes dhomologation FMRC numro de classe 3605 relatives au service et la rparation. Contactez Motorola afin dobtenir une assistance pour le service et la rparation dunits Motorola scurit intrinsque. 15 Franais Canadien 6881095C98-H_SafetyP_FrCan.fm Page 16 Wednesday, July 25, 2012 3:04 PM Une rparation consiste effectuer une modification lintrieur de lunit afin quelle retrouve sa condition dorigine. Ne sont pas considres comme des rparations, les modifications effectues sans quil soit ncessaire douvrir le botier externe de lunit de telle sorte que ses circuits lectriques intgrs soient exposs. vitez dinterchanger des options ou des accessoires. Lquipement de communications Motorola certifi de scurit intrinsque par lentit dhomologation (FMRC, UL, CSA, CENELEC) est test en tant que systme complet, savoir : la radio portable, la batterie, les accessoires et les options, tous homologus par lentit correspondante. Cette combinaison unit portable-batterie agre doit tre strictement respecte. Aucun composant de substitution ne doit tre utilis mme sil a pralablement t homologu pour une utilisation avec un autre appareil de communications Motorola. Les configurations homologues peuvent tre consultes dans la liste mise disposition par lentit dhomologation
(FMRC, UL, CSA, CENELEC). Ltiquette dhomologation de scurit intrinsque appose sur la radio identifie la classification scurit intrinsque de cette radio ainsi que les batteries approuves qui peuvent tre utilises avec ce systme. Le numro de rfrence du manuel mentionn sur ltiquette dhomologation de scurit intrinsque identifie les accessoires et/ou les options agrs qui peuvent tre utilises avec cette unit de radio mobile. Le fait de ne pas utiliser une batterie ou un accessoire Motorola scurit intrinsque avec lunit de radio Motorola agre annule lhomologation de scurit intrinsque de cette unit de radio. Franais Canadien 16
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-08-10 | 156 ~ 162 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Class II permissive change or modification of presently authorized equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | 2013-05-31 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
4 | 156 ~ 162 | TNF - Licensed Non-Broadcast Transmitter Held to Face |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2015-08-10
|
||||
1 2 3 4 |
2013-05-31
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0003778479
|
||||
1 2 3 4 | Physical Address |
8000 West Sunrise Blvd
|
||||
1 2 3 4 |
Ft Lauderdale, Florida 33322
|
|||||
1 2 3 4 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
j******@acstestlab.com
|
||||
1 2 3 4 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
1 2 3 4 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
AZ4
|
||||
1 2 3 4 | Equipment Product Code |
89FT3833
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
D**** Z******
|
||||
1 2 3 4 | Title |
Regulatory Compliance Manager
|
||||
1 2 3 4 | Telephone Number |
95472********
|
||||
1 2 3 4 | Fax Number |
--********
|
||||
1 2 3 4 |
d******@motorolasolutions.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 | Yes | |||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable 2-Way Radio | ||||
1 2 3 4 | 2 Way Portable Radio | |||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Power listed is rated conducted. Maximum conducted output power is 6.0 Watts per 90.205(s). Minimum output setting is 1W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body-worn accessory exposure conditions are 0.55 W/kg and 1.82 W/kg respectively. Class II Change to add new body-worn carry accessory as described in this filing. | ||||
1 2 3 4 | Power listed is Conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in this composite filing. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Class II Change to add new body-worn carry accessory as described in this filing. | |||||
1 2 3 4 | Power listed is Conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in this composite filing. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg and 1.29 W/kg, respectively. | |||||
1 2 3 4 | Power listed is rated conducted. Maximum conducted output power is 6.0 Watts per 90.205(s). Minimum output setting is 1W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, and simultaneous transmission exposure conditions are 0.55 W/kg, 1.28 W/kg, and 1.29 W/kg, respectively. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Motorola Solutions Malaysia Sdn Bhd
|
||||
1 2 3 4 |
Advanced Compliance Solutions, Inc.
|
|||||
1 2 3 4 | Name |
S******** H********
|
||||
1 2 3 4 |
S**** W********
|
|||||
1 2 3 4 | Telephone Number |
60485******** Extension:
|
||||
1 2 3 4 |
561-9********
|
|||||
1 2 3 4 | Fax Number |
604-6********
|
||||
1 2 3 4 |
c******@motorolasolutions.com
|
|||||
1 2 3 4 |
s******@acstestlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 2 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60FXE | |||||||||||||||||||||||||||||||||
1 | 3 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60FXD | |||||||||||||||||||||||||||||||||
1 | 4 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60F1E | |||||||||||||||||||||||||||||||||
1 | 5 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60F1D | |||||||||||||||||||||||||||||||||
1 | 6 | 90.210(e) | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60F1W | |||||||||||||||||||||||||||||||||
1 | 7 | 8 | BE | 156 | 162 | 5 | 0.5 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0100000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0100000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
4 | 2 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60FXE | |||||||||||||||||||||||||||||||||
4 | 3 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60FXD | |||||||||||||||||||||||||||||||||
4 | 4 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60F1E | |||||||||||||||||||||||||||||||||
4 | 5 | 90.21 | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60F1D | |||||||||||||||||||||||||||||||||
4 | 6 | 90.210(e) | BE EF | 136 | 174 | 5 | 0.5 ppm | 7K60F1W | |||||||||||||||||||||||||||||||||
4 | 7 | 8 | BE | 156 | 162 | 5 | 0.5 ppm | 16K0F3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC