FCC ID: AZ489FT5867 Portable 2-Way Radio

PROFESSIONAL DIGITAL TWO-WAY RADIO MOTOTRBO SL7550 & SL7590 PORTABLES USER GUIDE

................................................................ Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. Declaration of Conformity Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product:

Model Name: SL7550 & SL7590 conforms to the following regulations:

FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device i English As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ii English Contents Declaration of Conformity................................................. i Notes.......................................................................... 1 Important Safety Information............................................ 2 Software Version........................................................... 3 Computer Software Copyrights ........................................ 4 Handling Precautions ..................................................... 5 RF Energy Exposure and Product Safety Guidelines and Instructions .................................................................. 6 Notes.......................................................................... 7 Getting Started ............................................................. 8 How to Use This Guide............................................. 8 What Your Dealer/System Administrator Can Tell You ...................................................................... 8 Preparing Your Radio for Use .......................................... 9 Charging the Battery ................................................ 9 Attaching the Battery.............................................. 10 Attaching the Earpiece/Audio Accessory .................... 10 Powering Up the Radio............................................11 Adjusting the Volume ..............................................11 Identifying Radio Controls ............................................. 12 Radio Controls...................................................... 12 Programmable Buttons........................................... 13 Assignable Radio Functions .............................. 13 Assignable Settings or Utility Functions................ 15 Using the 4-Way Navigation Disc.............................. 15 Accessing the Programmed Functions....................... 16 Using the Keypad.................................................. 17 Push-To-Talk (PTT) Button ...................................... 18 IP Site Connect..................................................... 19 Capacity Plus ....................................................... 19 Linked Capacity Plus ............................................. 20 Identifying Status Indicators........................................... 21 Display Icons........................................................ 21 Call Icons ............................................................ 23 Utilities Icons........................................................ 24 Mini Notice Icons................................................... 24 Sent Item Icons .................................................... 24 Job Tickets Icons .................................................. 25 LED Indicator ....................................................... 25 Audio Tones ......................................................... 26 Indicator Tones ..................................................... 27 Making and Receiving Calls .......................................... 28 Selecting a Zone ................................................... 28 Selecting a Channel............................................... 29 Receiving and Responding to a Radio Call ................. 30 Receiving and Responding to a Group Call........... 30 Receiving and Responding to a Private Call........... 31 Receiving an All Call ........................................ 31 Receiving and Responding to a Phone Call........... 32 Making a Radio Call............................................... 33 Making a Group Call ........................................ 34 Making a Private Call ...................................... 34 Making an All Call ........................................... 35 Making a Phone Call with the One Touch Access Button........................................................... 36 Making a Group, Private or All Call with the Programmable Number Key .............................. 37 Making a Phone Call with the Programmable Phone Button ................................................. 38 Stopping a Radio Call ............................................ 39 Talkaround........................................................... 40 Monitoring Features............................................... 40 iii English Monitoring a Channel ....................................... 40 Permanent Monitor .......................................... 41 Advanced Features ..................................................... 42 Radio Check ........................................................ 42 Sending a Radio Check .................................... 42 Remote Monitor .................................................... 43 Initiating Remote Monitor .................................. 43 Scan Lists............................................................ 44 Viewing an Entry in the Scan List........................ 44 Viewing an Entry in the Scan List by Alias Search .......................................................... 45 Editing the Scan List ........................................ 45 Scan................................................................... 48 Setting an Active Scan List................................ 49 Starting and Stopping Scan ............................... 49 Responding to a Transmission During a Scan............................................................. 49 Deleting a Nuisance Channel............................. 50 Restoring a Nuisance Channel........................... 50 Contact Settings ................................................... 50 Making a Group Call from Contacts..................... 51 Making a Private Call from Contacts ................... 52 Making a Phone Call from Contacts .................... 53 Making a Call Alias Search ............................... 55 Making a Group, Private, Phone or All Call by Alias Search .................................................. 56 Assigning an Entry to a Programmable Number Key ............................................................. 57 Removing the Association between Entry and Programmable Number Key ............................. 58 Adding a New Contact...................................... 59 Sending a Message to a Contact ........................ 60 iv English Call Indicator Settings ............................................ 60

............................................................ 60 Activating and Deactivating Call Ringers for Call Alert Activating and Deactivating Call Ringers for Private Calls .................................................. 61 Activating and Deactivating Call Ringers for Text Message ....................................................... 61 Activating and Deactivating Call Ringers for Telemetry Status with Text................................. 62 Assigning Ring Styles ...................................... 62 All Tones ....................................................... 63 Ring Alert Type Selection.................................. 63 Escalating Alarm Tone Volume........................... 64 Call Log Features.................................................. 64 Viewing Recent Calls ....................................... 64 Missed Call Screen.......................................... 65 Storing an Alias from a Call List.......................... 65 Deleting a Call from a Call List ........................... 65 Viewing Details from a Call List .......................... 66 Call Alert Operation ............................................... 66 Receiving and Responding to a Call Alert............. 66 Making a Call Alert from the Contact List.............. 66 Making a Call Alert with the One Touch Access Button........................................................... 67 Emergency Operation ............................................ 67 Receiving an Emergency Alarm ......................... 68 Responding to an Emergency Alarm ................... 69 Sending an Emergency Alarm............................ 69 Sending an Emergency Alarm with Call ............... 70 Sending an Emergency Alarm with Voice to Follow .......................................................... 70 Reinitiating an Emergency Mode ........................ 71 Exiting Emergency Mode .................................. 72 Text Message Features .......................................... 72 Writing and Sending a Text Message................... 72 Sending a Quick Text Message .......................... 73 Sending a Quick Text Message .......................... 75 Accessing the Drafts Folder............................... 75 Managing Fail-to-Send Text Messages ................ 77 Managing Sent Text Messages .......................... 79 Receiving a Text Message ................................ 82 Managing Received Text Messages .................... 83 Job Tickets .......................................................... 86 Accessing the Job Ticket Folder ......................... 87 Responding to the Job Ticket............................. 88 Deleting a Job Ticket........................................ 89 Privacy................................................................ 90 Covert Mode ........................................................ 91 Entering Covert Mode ...................................... 91 Exiting Covert Mode ........................................ 91 Dual Tone Multi Frequency (DTMF)........................... 92 Multi-Site Controls ................................................. 92 Starting an Automatic Site Search ...................... 92 Stopping an Automatic Site Search ..................... 93 Starting a Manual Site Search............................ 94 Security............................................................... 95 Radio Disable................................................. 95 Radio Enable ................................................. 96 Lone Worker ........................................................ 97 Password Lock Features ........................................ 97 Accessing the Radio from Password ................... 97 Unlocking the Radio from Locked State ............... 98 Turning the Password Lock On or Off .................. 99 Changing the Password.................................... 99 Bluetooth Operation.............................................. 100 Turning Bluetooth On and Off ........................... 100 Finding and Connecting to a Bluetooth Device ......................................................... 101 Finding and Connecting from a Bluetooth Device

(Discoverable Mode)....................................... 101 Disconnecting from a Bluetooth Device............... 102 Switching Audio Route .................................... 102 Viewing Device Details .................................... 102 Editing Device Name ...................................... 103 Deleting Device Name..................................... 103 Bluetooth Mic Gain ......................................... 104 Notification List .................................................... 104 Accessing the Notification List........................... 104 Over-the-Air-Programming (OTAP) .......................... 105 Utilities............................................................... 105 Locking and Unlocking the Keypad .................... 105 Turning Keypad Tones On or Off ....................... 106 Turning the Option Board Feature(s) On or Off............................................................... 106 Identifying Cable Type..................................... 106 Turning the Voice Operating Transmission (VOX) Feature On or Off ........................................... 107 Controlling the Display Backlight ....................... 107 Turning the Radio Tones/Alerts On or Off ............ 108 Setting the Tone Alert Volume Offset Level ........... 108 Turning the Talk Permit Tone On or Off ............... 109 Setting the Text Message Alert Tone .................. 109 Changing the Display Mode.............................. 110 Adjusting the Display Brightness ....................... 111 Wallpaper Mode............................................. 112 Screen Saver Mode ........................................ 112 v English V. WHAT THIS WARRANTY DOES NOT COVER: ............................................................. 130 VI. PATENT AND SOFTWARE PROVISIONS: ........... 130 VII. GOVERNING LAW:......................................... 131 Audio Accessory ............................................ 113 Auto Keypad Lock .......................................... 113 Language ..................................................... 113 Turning the LED Indicator On or Off ................... 114 Voice Announcement ...................................... 114 Digital Mic AGC (Mic AGC-D) ........................... 115 Intelligent Audio ............................................. 115 Turning the Acoustic Feedback Suppressor Feature On or Off ........................................... 117 Text Entry Configuration .................................. 118 Accessing General Radio Information................. 123 RSSI Values.................................................. 125 Accessories .............................................................. 126 Antennas............................................................ 126 Audio Accessories................................................ 126 Batteries............................................................. 126 Bluetooth............................................................ 126 Cables ............................................................... 127 Carry Devices...................................................... 127 Chargers ............................................................ 127 Miscellaneous Accessories .................................... 127 Batteries and Chargers Warranty................................... 128 The Workmanship Warranty ................................... 128 The Capacity Warranty .......................................... 128 Limited Warranty ........................................................ 128 MOTOROLA COMMUNICATION PRODUCTS ........... 128 I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: ....................................................... 128 II. GENERAL PROVISIONS: .................................. 129 III. STATE LAW RIGHTS:....................................... 129 IV. HOW TO GET WARRANTY SERVICE: ................ 129 vi English

.............................. Notes N o t e s 1 English permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. ............................. Important Safety Information RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios ATTENTION!

This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following website:

http://www.motorolasolutions.com Any modification to this device, not expressly authorized by Motorola, may void the users authority to operate this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with Motorola-approved antenna with the maximum 2 English FRC_Safety_PCR_ASTRO_New.fm Page vi Tuesday, June 18, 2013 10:55 AM Informations importantes sur la scurit Exposition aux radiofrquences et scurit du produit pour radios bidirectionnelles portatives ATTENTION!

Cette radio ne doit tre utilise qu' des fins professionnelles. Avant d'utiliser la radio, lisez le guide Exposition aux radiofrquences et scurit du produit pour radios bidirectionnelles portatives, qui contient d'importantes instructions de fonctionnement pour une utilisation scuritaire et des informations sur l'exposition aux frquences radiolectriques afin d'assurer la conformit aux normes et rglements applicables. Pour obtenir une liste d'antennes et d'autres accessoires approuvs par Motorola, consultez le site Web:

http://www.motorolasolutions.com Selon la rglementation d'Industrie Canada, cet metteur radio ne peut tre utilis qu'avec une antenne dont le type et le gain maximal (ou minimal) sont approuvs par Industrie Canada pour cet metteur. Afin de limiter les interfrences radio pour les autres utilisateurs, le type et le gain de l'antenne doivent tre choisis de faon ce que la puissance isotrope rayonne quivalente (P.I.R.E.) ne soit pas plus forte qu'il ne le faut pour tablir la communication. Le prsent metteur a t approuv par Industrie Canada pour fonctionner avec les types d'antenne agrs par Motorola et ayant un gain admissible maximal ainsi que l'impdance requise pour chaque type d'antenne indiqu. Les types d'antenne non inclus, dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. t i r u c s a l r u s s e t n a t r o p m i s n o i t a m r o f n I vi Franais Canadien

.............................. Software Version All the features described in the following sections are supported by the radio's software version R02.06.20 or later. See Checking the Firmware Version and Codeplug Version on page 124 to determine your radio's software version. Check with your dealer or system administrator for more details of all the features supported. S o f t w a r e V e r s o n i 3 English U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,

#5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656,

#5,517,511, #5,491,772, #5,247,579, #5,226,084 and

#5,195,166. ............................. Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. The AMBE+2 voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. 4 English

.............................. Handling Precautions The MOTOTRBO Series Digital Portable radio meets IP54 specifications, allowing the radio to withstand adverse field conditions such as being exposed to water or dust. Keep your radio clean and exposure to water should be avoided to help ensure proper functionality and performance. To clean the exterior surfaces of the radio, use a diluted solution of mild dishwashing detergent and fresh water (i.e. one teaspoon of detergent to one gallon of water). These surfaces should be cleaned whenever a periodic visual inspection reveals the presence of smudges, grease, and/or grime. The effects of certain chemicals and their vapors can have harmful results on certain plastics. Avoid using aerosol sprays, tuner cleaners and other chemicals. H a n d l i n g P r e c a u t i o n s 5 English

.............................. RF Energy Exposure and Product Safety Guidelines and Instructions For more detailed proper usage instructions, warnings and cautions, refer to the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios booklet. To ensure a comfortable audio level and compliance with RF energy exposure limits, do not hold the radio against the ear or alongside the head. Use only in front of the face or with Motorola Solutions approved audio accessories and carry cases to ensure compliance with RF energy exposure limits. 6 English

.............................. Notes N o t e s 7 English What Your Dealer/System Administrator Can Tell You You can consult your dealer or system administrator about the following:

Is your radio programmed with any preset conventional channels?

Which buttons have been programmed to access other features?

What optional accessories may suit your needs?

What are the best radio usage practices for effective communication?

What maintenance procedures will help promote longer radio life?

.............................. Getting Started The following topics are covered:

How to Use This Guide ................................................ 8 What Your Dealer/System Administrator Can Tell You.......................................................................... 8 How to Use This Guide This User Guide covers the basic operation of the MOTOTRBO Portables. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information. For features that are available in both conventional Analog and Digital modes, no icon is shown. For features that are available in a conventional multi-site mode, see IP Site Connect on page 19 for more information. Selected features are also available on the single-site trunking mode, Capacity Plus. See Capacity Plus on page 19 for more information. Selected features are also available in the multi-site trunking mode, Linked Capacity Plus. See Linked Capacity Plus on page 20 for more information. 8 English

.............................. Preparing Your Radio for Use The following topics are covered:

Charging the Battery.................................................... 9 Attaching the Battery ................................................. 10 Attaching the Earpiece/Audio Accessory........................ 10 Powering Up the Radio ...............................................11 Adjusting the Volume ..................................................11 Charging the Battery Your radio is powered by a Lithium-Ion (Li-lon) battery. To avoid damage and comply with warranty terms, charge the battery using a Motorola charger exactly as described in the charger user guide. All chargers can charge only Motorola authorized batteries. Other batteries may not charge. It is recommended your radio remains powered off while charging. Charge a new battery 14 to 16 hours before initial use for best performance. Prior to charging a battery with the radio, it is recommended to turn the radio off. Batteries charge best at room temperature. P r e p a r i n g Y o u r R a d o f o r U s e i The battery charging icon will be displayed until the user unplugs the USB cable or takes the radio out of the charger. 9 English Attaching the Battery 1 Align the battery contacts with the contacts inside the battery compartment. Insert the contact side of the battery first. Gently push the battery into place. Attaching the Earpiece/Audio Accessory The audio jack is located on the antenna side of the radio. It is used to connect accessories to the radio. 2 To attach battery cover, align it in place and slide the battery latch until it snaps into place. Slide battery latch into lock position. 1 Lift up the flap of the Audio Jack cover. Align the indicators on both the connector and housing, then push until it fits in properly. 2 Rotate connector clockwise or counterclockwise to lock. 3 To unlock, rotate until the indicators on both the connector and housing are aligned. Pull out the connector gently to disconnect from radio. 10 English 112BatteryLatchAudio Jack Powering Up the Radio Press the On/Off button on the front keypad. You see a welcome message or welcome image. The LED blinks green. Adjusting the Volume To increase the volume, push the Volume Button up. To decrease the volume, push the volume button down. Note: Your radio can be programmed to have a minimum volume offset where the volume level cannot be lowered past the programmed minimum volume. Check with your dealer or system administrator for more information. P r e p a r i n g Y o u r R a d o f o r U s e i 11 English ORIndicatorsOn/OffButtonLEDIndicatorVolumeButton.............................. Identifying Radio Controls The following topics are covered:

Radio Controls ......................................................... 12 Programmable Buttons .............................................. 13 Using the 4-Way Navigation Disc ................................. 15 Accessing the Programmed Functions .......................... 16 Using the Keypad ..................................................... 17 Push-To-Talk (PTT) Button.......................................... 18 IP Site Connect ........................................................ 19 Capacity Plus........................................................... 19 Linked Capacity Plus ................................................. 20 Radio Controls 1. LED Indicator 2. Push-to-Talk (PTT) Button 3. Display 4. Microphone 5. Volume Button 12 English 594378211511121061413 6. Front Button P1*

7. On/Off Button 8. Emergency Button*

9. 4way Navigation Disc 10. Antenna 11. Speaker 12. Front Button P2*

13. Back/Home Button 14. Menu/OK Button 15. Keypad Programmable Buttons Your dealer can program the programmable buttons as shortcuts to radio functions or preset channels/groups depending on the duration of a button press:

Short press Pressing and releasing rapidly. Long press Pressing and holding for the programmed duration. Hold down Keeping the button pressed.

* These buttons are programmable. Note: The programmed duration of a button press is applicable for all assignable radio/utility functions or settings. See Emergency Operation on page 67 for more information on the programmed duration of the Emergency button. Assignable Radio Functions Actions A programmable button to access a CPS programmable action list. Audio Routing Toggles audio routing between internal and external speakers. Bluetooth Audio Switch Toggles audio routing between internal radio speaker and external Bluetooth-enabled accessory. Contacts Provides direct access to the Contacts list. Call Alert Provides direct access to the contacts list for you to select a contact to whom a Call Alert can be sent. Call Log Selects the call log list. Channel Announcement Plays zone and channel announcement voice messages for the current channel. Display Radio Alias Shows radio display name. 13 English I i d e n t i f y n g R a d o C o n t r o s i l Emergency Depending on the programming, initiates or cancels an emergency alarm or call. Intelligent Audio Toggles intelligent audio on or off. Job Tickets Allows the user to view and act upon job tickets. Manual Dial Depending on the programming, initiates a Private or Phone Call by keying in any subscriber ID or phone number. Manual Site Roam * Starts the manual site search. Mic AGC On/Off Toggles the internal microphone automatic gain control (AGC) on or off. Monitor Monitors a selected channel for activity. Notifications Provides direct access to the Notifications list. Nuisance Channel Delete * Temporarily removes an unwanted channel, except for the Selected Channel, from the scan list. The Selected Channel refers to the users selected zone/channel combination from which scan is initiated. One Touch Access Directly initiates a predefined Private, Phone or Group Call, a Call Alert or a Quick Text message. Option Board Feature Toggles option board feature(s) on or off for option board-enabled channels. Permanent Monitor * Monitors a selected channel for all radio traffic until function is disabled.

* Not applicable in Capacity Plus and Linked Capacity Plus 14 English Phone Provides direct access to the Phone Contacts list Power Battery Indicator Displays the current status of the battery level. Privacy Toggles privacy on or off. Radio Alias and ID Provides radio alias and ID. Radio Check Determines if a radio is active in a system. Radio Enable Allows a target radio to be remotely enabled. Radio Disable Allows a target radio to be remotely disabled. Remote Monitor Turns on the microphone of a target radio without it giving any indicators. Repeater/Talkaround * Toggles between using a repeater and communicating directly with another radio. Ring Alert Type Provides direct access to the Ring Alert Type Setting. Scan * Toggles scan on or off. Site Info Displays current Linked Capacity Plus site name and ID. Plays site announcement voice messages for the current site (this function is unavailable when Voice Announcement is disabled). Site Lock On/Off * Toggles the automatic site roam on or off. Telemetry Control Controls the Output Pin on a local or remote radio. Text Message Selects the text message menu. Transmit Interrupt Remote Dekey Stops the transmission of a remote monitored radio without giving any indicators, or an ongoing interruptible call to free the channel. Unassigned Unassigned programmable button. Voice Announcement On/Off Toggles voice announcement on or off. Voice Operating Transmission (VOX) Toggles VOX on or off. Zone Allows selection from a list of zones. Assignable Settings or Utility Functions All Tones/Alerts Toggles all tones and alerts on or off. Brightness Allows brightness to be set via the manual brightness mode or auto brightness control via the radios photo sensor. Display Mode Toggles the day/night display mode on or off. Wallpaper Displayed on home screen. Using the 4-Way Navigation Disc You can use the 4-way navigation disc,

, to scroll through options, increase/decrease values, and navigate vertically. Direction or Vertical Navigation Vertical Navigation Vertical Navigation or

-

-

Previous/Next Item Increase/Decrease

-

Cate-

gory Menu Lists View Details Nu-

meric Values You can use the 4-way navigation disc, alias, or free form text editor.

, as a number, The screen. button can be used to change the channels in the home Press to select your desired channel. 15 English I i d e n t i f y n g R a d o C o n t r o s i l 2 To select a function or enter a sub-menu, press the button. 3 To go back one menu level, or to return to the previous screen, press the button to return to the Home screen. button. Long press the Note: Your radio automatically exits the menu after a period of inactivity and returns to your Home screen. Editor Category Number Alias Free Form Text Direction or

-

-

Move cursor up/down or

-

Move cursor one character left/right. Move cursor one character left/right. Accessing the Programmed Functions You can access various radio functions through one of the following ways:

A short or long press of the relevant programmable buttons. Use the 4-Way Navigation Disc as follows:

1 Press to access the menu. Press the appropriate Menu Scroll button (

or

) to access the menu functions. 16 English Using the Keypad I You can use the 3 x 4 alphanumeric keypad to access your radios features. You can use the keypad to enter subscriber aliases or IDs, and text messages. Many characters require that you press a key multiple times. The next table shows the number of times a key needs to be pressed to generate the required character. Key Number of Times Key is Pressed 1 1 2

. 3

, 4

?

A D G J M P T B E H K N Q U C F I L O R V 2 3 4 5 6 S 8 6

@

7

&

8

'

9

%

10 11

:

12

*

13

#

5

!

7 17 English i d e n t i f y n g R a d o C o n t r o s i l Key Number of Times Key is Pressed 1 W 2 X 3 Y 4 8 5 6 7 8 9 10 11 12 13 0

* or del

# or space Note: Press to enter 0 and long press to activate the CAPS lock. Another long press to turn off the CAPS lock. Note: Press during text entry to delete the character. Press during numeric entry to enter a *. Note: Press during text entry to insert a space. Press during numeric entry to enter a #. Long press to change text entry method. Push-To-Talk (PTT) Button The PTT button on the side of the radio serves two basic purposes:

18 English While a call is in progress, the PTT button allows the radio to transmit to other radios in the call. PTT Button Press and hold down PTT button to talk. Release the PTT button to listen. The microphone is activated when the PTT button is pressed. While a call is not in progress, the PTT button is used to make a new call (see Making a Radio Call on page 33). If the Talk Permit Tone (see Turning the Talk Permit Tone On or Off on page 109) is enabled, wait until the short alert tone ends before talking. During a call, if the Channel Free Indication feature is enabled on your radio (programmed by your dealer), you will hear a short alert tone the moment the target radio (the radio that is receiving your call) releases the PTT button, indicating the channel is free for you to respond. You will also hear a continuous talk prohibit tone, if your call is interrupted, indicating that you should release the PTT button, for example when the radio receives an Emergency Call. IP Site Connect This feature allows your radio to extend conventional communication beyond the reach of a single site, by connecting to different available sites which are connected via an Internet Protocol (IP) network. When the radio moves out of range from one site and into the range of another, it connects to the new site's repeater to send or receive calls/data transmissions. Depending on your settings, this is done automatically or manually. If the radio is set to do this automatically, it scans through all available sites when the signal from the current site is weak or when the radio is unable to detect any signal from the current site. It then locks on to the repeater with the strongest Received Signal Strength Indicator (RSSI) value. In a manual site search, the radio searches for the next site in the roam list that is currently in range (but which may not have the strongest signal) and locks on to it. Note: Each channel can only have either Scan or Roam enabled, not both at the same time. Channels with this feature enabled can be added to a particular roam list. The radio searches the channel(s) in the roam list during the automatic roam operation to locate the best site. A roam list supports a maximum of 16 channels (including the Selected Channel). Note: You cannot manually add or delete an entry to the roam list. Check with your dealer or system administrator for more information. Capacity Plus Capacity Plus is a single-site trunking configuration of the MOTOTRBO radio system, which uses a pool of channels to support hundreds of users and up to 254 Groups. This feature allows your radio to efficiently utilize the available number of programmed channels while in Repeater Mode. 19 English I i d e n t i f y n g R a d o C o n t r o s i l when the radio is unable to detect any signal from the current site. It then locks on to the repeater with the strongest Received Signal Strength Indicator (RSSI) value. In a manual site search, the radio searches for the next site in the roam list that is currently in range (but which may not have the strongest signal) and locks on to it. Any channel with Linked Capacity Plus enabled can be added to a particular roam list. The radio searches these channels during the automatic roam operation to locate the best site. Note: You cannot manually add or delete an entry to the roam list. Check with your dealer or system administrator for more information. Similar to Capacity Plus, icons of features not applicable to Linked Capacity Plus are not available in the menu. You hear a negative indicator tone if you try to access a feature not applicable to Linked Capacity Plus via a programmable button press. Check with your dealer or system administrator for more information on this configuration. You hear a negative indicator tone if you try to access a feature not applicable to Capacity Plus via a programmable button press. Your radio also has features that are available in conventional digital mode, IP Site Connect, Capacity Plus and Linked Capacity Plus. However, the minor differences in the way each feature works does NOT affect the performance of your radio. Check with your dealer or system administrator for more information on this configuration. Linked Capacity Plus Linked Capacity Plus is a multi-site multi-channel trunking configuration of the MOTOTRBO radio system, combining the best of both Capacity Plus and IP Site Connect configurations. Linked Capacity Plus allows your radio to extend trunking communication beyond the reach of a single site, by connecting to different available sites which are connected via an Internet Protocol (IP) network. It also provides an increase in capacity by efficiently utilizing the combined available number of programmed channels supported by each of the available sites. When the radio moves out of range from one site and into the range of another, it connects to the new site's repeater to send or receive calls/data transmissions. Depending on your settings, this is done automatically or manually. If the radio is set to do this automatically, it scans through all available sites when the signal from the current site is weak or 20 English

.............................. Identifying Status Indicators The following topics are covered:

Display Icons ........................................................... 21 Call Icons ................................................................ 23 Utilities Icons ........................................................... 24 Mini Notice Icons ...................................................... 24 Sent Item Icons ....................................................... 24 Job Tickets Icons ...................................................... 25 LED Indicator ........................................................... 25 Audio Tones............................................................. 26 Indicator Tones......................................................... 27 Display Icons Your radio has a 2 inch landscape display with QVGA (Quarter Video Graphics Array) 16-bit color resolution. The following are icons that appear on the radios display. Icons are displayed arranged left-most in order of appearance/usage. I i d e n t i f y n g S t a t u s I i n d c a t o r s Received Signal Strength Indicator (RSSI) The number of bars displayed represents the radio signal strength. Four bars indicate the strongest signal. This icon is only displayed while receiving. Monitor Selected channel is being monitored. Bluetooth Not Connected The Bluetooth feature is enabled but there is no remote Bluetooth device connected. Bluetooth Connected The Bluetooth feature is enabled. The icon stays lit when a remote Bluetooth device is connected. Bluetooth Discoverable The Bluetooth feature is enabled and radio is in discoverable mode. High Volume Data Radio is receiving high volume data and channel is busy. Job Ticket Notification Notification List has items to review. 21 English Option Board The Option Board is enabled. (Option board enabled models only) Option Board Non-Function The Option Board is disabled. Over-the-Air Programming Delay Timer Indicates time left before automatic restart of radio. Scan1,2 Scan feature is enabled. Scan- Priority 11,2 Radio detects activity on channel/group designated as Priority 1. Scan- Priority 21,2 Radio detects activity on channel/group designated as Priority 2. Emergency Radio is in Emergency mode. Secure The Privacy feature is enabled. Unsecure The Privacy feature is disabled. Site Roaming1 The site roaming feature is enabled. Talkaround1,2 In the absence of a repeater, radio is currently configured for direct radio to radio communication. Battery The number of bars (0 4) shown indicates the charge remaining in the battery. Blinks when the battery is low. Battery Discharging Status Shows battery discharging status. All Tones Disabled No ring tones available. 1 Not applicable in Capacity Plus 2 Not applicable in Linked Capacity Plus 22 English Call Log Radio call log. Contact Radio contact is available. Message Incoming message. Silent Ring Silent ring mode is enabled. Ring Only Ringing mode is enabled. Vibrate Vibrate mode is enabled. Vibrate and Ring Vibrate and Ring mode is enabled. Keypad Keypad locked. Call Icons The following icons appear on the radios display during a call. These icons also appear in the Contacts list to indicate ID type. Private Call Indicates a Private Call in progress. Group Call/All Call Indicates a Group Call or All Call in progress. Phone Call as Private Call Indicates a Phone Call as Private Call in progress. In the Contacts list, it indicates a phone alias (name) or ID (number). Phone Call as Group/All Call Indicates a Phone Call as Group/All Call in progress. In the Contacts list, it indicates a group alias (name) or ID (number). I i d e n t i f y n g S t a t u s I i n d c a t o r s 23 English Mini Notice Icons The following icons appear momentarily on the radios display after an action to perform task is taken. Successful Transmission (Positive) Successful action taken. Failed Transmission (Negative) Failed action taken. Transmission in Progress (Transitional) Transmitting. This is seen before indication for Successful Transmission or Failed Transmission. Sent Item Icons The following icons appear at the top right corner of the radios display in the Sent Items folder. Bluetooth PC Call Indicates a Bluetooth PC Call in progress. In the Contacts list, it indicates a Bluetooth PC Call alias (name) or ID (number). Private Call Alert In the Contacts list, it indicates a subscriber alias (name) or ID (number). Utilities Icons The following icons appear beside menu items on the radios display that offer the following options. Checkbox (Empty) Indicates the option is not selected. Checkbox (Checked) Indicates the option is selected. Brightness Indicates the brightness level. Brightness Highlighted Highlights the brightness level. 24 English OR OR OR OR OR Sent Successfully The text message is sent successfully. Individual or Group Message Read The text message has been read. Individual or Group Message Unread The text message has not been read. Send Failed The text message has not been sent. In-Progress The text message to a group alias or ID is pending transmission. The text message to a subscriber alias or ID is pending transmission, followed by waiting for acknowledgement. Job Tickets Icons All Jobs Indicates all jobs listed. New Jobs Indicates new jobs. LED Indicator The LED indicator shows the operational status of your radio. I i d e n t i f y n g S t a t u s I i n d c a t o r s 25 English LED Indicator Blinking red Solid yellow Blinking yellow Double blinking yellow Solid green Radio is transmitting at low battery condition, receiving an emergency transmission or has failed the self-test upon powering up. Radio is monitoring a digital conventional channel or in Bluetooth Discoverable Mode. Also indicates fair battery charge when programmable button is pressed. Radio is scanning for activity or receiving a Call Alert, or all local Linked Capacity Plus channels are busy. Radio is no longer connected to the repeater while in Capacity Plus or Linked Capacity Plus; all Capacity Plus or Linked Capacity Plus channels are currently busy . Auto Roaming is enabled, radio is actively searching for a new site, or radio has yet to respond to a group call alert. Also indicates that radio has yet to respond to a group call alert, or radio is locked. Radio is powering up or transmitting. Also indicates full charge of the battery when the programmable button is pressed. Blinking green Radio is powering up, receiving a non-privacy- enabled call or data, detecting activity, or retrieving Over-the-Air Programming transmissions over the air. Radio is receiving a privacy-enabled call or data. Rapidly blinking green Note: While in conventional mode, when the LED blinks green, it indicates the radio detects activity over the air. Due to the nature of the digital protocol, this activity may or may not affect the radio's programmed channel. For Capacity Plus and Linked Capacity Plus, there is no LED indication when the radio is detecting activity over the air. Audio Tones Alert tones provide you with audible indications of the radios status or the radios response to data received. 26 English High pitched tone Continuous Tone Periodic Tone Repetitive Tone Momentary Tone Indicator Tones Low pitched tone A monotone sound. Sounds continuously until termination. Sounds periodically depending on the duration set by the radio. Tone starts, stops, and repeats itself. A single tone that repeats itself until it is terminated by the user. Sounds only once for a short period of time defined by the radio. High pitched tone Low pitched tone Positive Indicator Tone Negative Indicator Tone I i d e n t i f y n g S t a t u s I i n d c a t o r s 27 English

.............................. Making and Receiving Calls The following topics are covered:

Selecting a Zone....................................................... 28 Selecting a Channel .................................................. 29 Receiving and Responding to a Radio Call..................... 30 Making a Radio Call .................................................. 33 Stopping a Radio Call ................................................ 39 Talkaround .............................................................. 40 Monitoring Features .................................................. 40 Steps Press the programmed Zone button. Radio Controls Programmed Zone button Radio menu a. b. to access the menu. or select. to Zone and press to The current zone is displayed and indicated by a

. Selecting a Zone 2 Select the required zone. A zone is a group of channels. Your radio supports up to 250 zones, with a maximum of 160 channels per zone. 1 Access the Zone feature. 28 English Radio Control or Keypad Steps or and scroll to the required zone. a. Enter the first character of the required zone. b. A blinking cursor appears allowing you to continue entering the subsequent characters of the required zone. Note:

Press to move one space to the left. Press to move one space to the right. Press key to delete any the unwanted characters. Note: The first line of the display shows the characters you keyed in. The second line shows a zone that matches what you have already keyed in. The alias search is case-insensitive. If there are two or more zones matches the keyed in characters, the radio displays the zone that is listed first in the zone list. 3 Press to select. The display shows <Zone> Selected momentarily and returns to the selected zone screen. Selecting a Channel Transmissions are sent and received on a channel. Depending on your radios configuration, each channel may have been programmed differently to support different groups of users or supplied with different features. After selecting the relevant Zone, select the relevant channel you require to transmit or receive on. i M a k n g a n d R e c e i i v n g C a l l s to access the Channel List On the navigation disc, press

(while on the Home Screen). The active channel is displayed and indicated by a 29 English Receiving and Responding to a Radio Call Note: See Privacy on page 90 for more information. Once the channel, subscriber ID or group ID is displayed, you can proceed to receive and respond to calls. The LED lights up solid green while the radio is transmitting and blinks green when the radio is receiving. Receiving and Responding to a Group Call To receive a call from a group of users, your radio must be configured as part of that group. When you receive a Group Call (while on the Home screen), the LED blinks green. The first line of the display shows the caller alias, and the RSSI icon. The second line displays the group alias and the Group Call icon (in Digital mode only). Your radio unmutes and the incoming call sounds through the radio's speaker. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. Note: The LED lights up solid green while the radio is transmitting and blinks green rapidly when the radio is receiving a privacy-enabled call . To unscramble a privacy-enabled call, your radio must have the same Privacy Key, OR the same Key Value and Key ID (programmed by your dealer), as the transmitting radio (the radio you are receiving the call from). If the Voice Interrupt feature is enabled, press the PTT button to stop the current call from the transmitting radio and free the channel for you to talk/respond. The LED lights up solid green. 2 Wait for one of the following tones to finish (if enabled), and speak clearly into the microphone. the Talk Permit Tone 30 English LED Indicator the PTT Sidetone 3 Release the PTT button to listen. If there is no voice activity for a predetermined period of time, the call ends. Note: See Making a Group Call on page 34 for details on making a Group Call. Note:

Note:

If the radio receives a Group Call while not on the Home screen, it remains on its current screen prior to answering the call. Long press the Home screen to view the caller alias before replying. button to go to the Receiving and Responding to a Private Call A Private Call is a call from an individual radio to another individual radio. When you receive a Private Call, the LED blinks green. The first line of the display shows the subscriber alias or ID, and the RSSI icon. The second line displays Private Call and the Private Call icon. Your radio unmutes and the incoming call sounds through the radio's speaker. i M a k n g a n d R e c e i i v n g C a l l s 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If the Voice Interrupt feature is enabled, press the PTT button to stop the current call from the transmitting radio and free the channel for you to talk/respond. The LED lights up solid green. 2 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 3 Release the PTT button to listen. If there is no voice activity for a predetermined period of time, the call ends. The display shows Call Ended. See Making a Private Call on page 34 for details on making a Private Call. Receiving an All Call An All Call is a call from an individual radio to every radio on the channel. It is used to make important announcements requiring the users full attention. 31 English When you receive an All Call, a tone sounds and the LED blinks green. The first line of the display shows the caller alias, and the RSSI icon. The second line displays All Call and the All Call icon. Your radio unmutes and the incoming call sounds through the radio speaker. Once the All Call ends, the radio returns to the previous screen before receiving the call. An All Call does not wait for a predetermined period of time before ending. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is now available for use. You cannot respond to an All Call. Note: See Making an All Call on page 35 for details on making an All Call. Note: The radio stops receiving the All Call if you switch to a different channel while receiving the call. During an All Call, you will not be able to use any programmed button functions until the call ends. 32 English Receiving and Responding to a Phone Call Phone Call as Private Call When you receive a Phone Call as a Private Call, the Phone Call icon appears in the top right corner; the display shows the caller alias or Phone Call. If Phone Call capability is not enabled in your radio, the first line of the display shows Unavailable and your radio mutes the call. Your radio returns to the previous screen when the call ends. 1 Press the PTT button to talk and release it to listen. 2 Press to end the call. The display shows Ending Phone Call. If successful, a tone sounds and the display shows All Call and Call Ended. If unsuccessful, your radio returns to the Phone Call screen. Repeat Step 2 to end the call. Phone Call as Group Call When you receive a Phone Call as a Group Call, 1 Press the PTT button to talk and release it to listen. 2 Press to end the call. The display shows Ending Phone Call. If successful, a tone sounds and the display shows All Call and Call Ended. If unsuccessful, your radio returns to the Phone Call screen. Repeat Step to end the call. Phone Call as All Call When you receive a Phone Call as an All Call, the Phone Call icon appears in the top right corner; the display shows All Call and Phone Call. If Phone Call capability is not enabled in your radio, the first line of the display shows Unavailable and your radio mutes the call. Note: When you receive a Phone Call as an All Call, you can respond to the call or end the call, only if an All Call type is assigned to the channel. 1 Press the PTT button to talk and release it to listen. 2 Press to end the call. The display shows Ending Phone Call. If successful, a tone sounds and the display shows All Call and Call Ended. If unsuccessful, your radio returns to the Phone Call screen. Repeat Step 3 to end the call. Making a Radio Call After selecting your channel, you can select a subscriber alias or ID, or group alias or ID by using:

The PTT button. A programmed One Touch Access button The One Touch Access feature allows you to make a Group or Private Call to a predefined ID easily. This feature can be assigned to a short or long programmable button press. You can ONLY have one ID assigned to a One Touch Access button. Your radio can have multiple One Touch Access buttons programmed. The programmed number keys This method is for Group, Private and All Calls only and is used with the keypad

(see Making a Group, Private or All Call with the Programmable Number Key on page 37). A programmable button This method is for Phone Calls only (see Making a Phone Call with the Programmable Phone Button on page 38). i M a k n g a n d R e c e i i v n g C a l l s The Contacts list (see Contact Settings on page 50). Manual Dial This method is for Private and Phone Calls only and is dialed using the keypad (see Making a Private Call from Contacts on page 52, and Making a Call with the Programmable Manual Dial Button). 33 English Note: Your radio must have the Privacy feature enabled on the channel to send a privacy-enabled transmission. Only target radios with the same Privacy Key OR the same Key Value and Key ID as your radio will be able to unscramble the transmission. Note: See Privacy on page 90 for more information. Making a Group Call To make a call to a group of users, your radio must be configured as part of that group. 1 Do one of the following. Select the channel with the active group alias or ID. See Selecting a Channel on page 29 Press the programmed One Touch Access button. 2 Press the PTT button to make the call. The LED lights up solid green. The Group Call icon appears in the top right corner. The first text line shows the group call alias. 34 English 3 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 4 Release the PTT button to listen. When the target radio responds, the LED blinks green, the radio unmutes and the response sounds through the radios speaker. You see the Group Call icon, the group alias or ID, and transmitting radio alias or ID on your display. 5 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. Radio returns to the screen you were on prior to initiating the call. Making a Private Call While you can receive and/or respond to a Private Call initiated by an authorized individual radio, your radio must be programmed for you to initiate a Private Call. There are two types of Private Calls. The first type, where a radio presence check is performed prior to setting up the call, while the other sets up the call immediately. Only one of these call types can be programmed to your radio by your dealer. You will hear a negative indicator tone, when you make a Private Call via the Contacts list, Call Log, One Touch Access button, the programmed number keys, or the Channel Selector Knob, if this feature is not enabled. Use the Text Message or Call Alert features to contact an individual radio. See Text Message Features on page 72 or Call Alert Operation on page 66 for more information. 1 Do one of the following. Select the channel with the active subscriber alias or ID. See Selecting a Channel on page 29 Press the programmed One Touch Access button. 2 Press the PTT button to make the call. If you release the PTT button while the radio is setting up the call, it exits without any indication and returns to the previous screen. The LED lights up solid green, the radio unmutes and the response sounds through the radios speaker. The Private Call icon appears on the top right corner. The first text line shows the subscriber alias. The second text line displays the call status.. 3 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 4 Release the PTT button to listen. When the target radio responds, the LED blinks green, the radio unmutes and the response sounds through the radio's speaker. 5 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. You hear a short tone. The display shows Call Ended. Your radio may be programmed to perform a radio presence check prior to setting up the Private Call. If the target radio is not available, you hear a short tone and see negative mini notice on the display. Making an All Call This feature allows you to transmit to all users on the channel. Your radio must be programmed to allow you to use this feature. Users on the channel cannot respond to an All Call. 1 Select the channel with the active All Call group alias or ID. See Selecting a Channel on page 29 2 Press the PTT button to make the call. i M a k n g a n d R e c e i i v n g C a l l s 35 English The LED lights up solid green.The Group Call icon appears in the top right corner. The first text line shows All Call. 3 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. Making a Phone Call with the One Touch Access Button 1 Press the programmed One Touch Access button to make to proceed. a Phone Call to the predefined alias or ID. If the entry for the One Touch Access button is empty, a negative indicator tone sounds. If the access code was not preconfigured in the Contacts list, the display shows Access Code:. Enter the access code and press The LED lights up solid green. The Phone Call icon appears in the top right corner. The first text line shows the subscriber alias. The second text line displays the call status. If the call-setup is successful, the DTMF tone sounds. You hear the dialing tone of the telephone user. The first text line shows the subscriber alias. The Phone Call icon remains in the top right corner. If the call-setup is unsuccessful, a tone sounds and the display shows Phone Call Failed. Your radio returns to the Access Code input screen. If the access code was preconfigured in the Contacts list, the radio returns to the screen you were on prior to initiating the call. 36 English 2 Press the PTT button to talk and release it to listen. To enter extra digits, if requested by the Phone Call, enter the extra digits using the keypad and press to proceed. The DTMF tone sounds with each keypad press, and the radio returns to the previous screen. 3 Press to end the call. If de-access code was not preconfigured in the Contacts list, the display shows De-Access Code:. Press the One Touch Access button, if it is programmed with the de-access code. If the entry for the One Touch Access button is empty, a negative indicator tone sounds. The DTMF tone sounds with each keypad press, and the display shows Ending Phone Call. If the end-call-setup is successful, a tone sounds and the display shows Call Ended. If the end-call-setup is unsuccessful, your radio returns to the Phone Call screen. Repeat Step 3 or wait for the telephone user to end the call. Note: When the telephone user ends the call, a tone sounds and the display shows Call Ended. If the call ends while you are entering the extra digits requested by the Phone Call, your radio returns to the screen you were on prior to initiating the call. to During channel access, press dismiss the call attempt. A tone sounds to indicate success. During the call, if you press the One Touch Access button with the deaccess code preconfigured or enter the deaccess code as the input for extra digits, your radio attempts to end the call. The access or deaccess code cannot be more than 10 characters. Making a Group, Private or All Call with the Programmable Number Key The Programmable Number Key feature allows you to make a Group, Private or All Call to a predefined alias or ID easily. This feature can be assigned to all the available number keys on a keypad. You can ONLY have one alias or ID assigned to a number key, but you can have more than one number key associated to an alias or ID. 1 Long press the programmed number key, when you are on the Home screen, to make a Group, Private or All Call to the predefined alias or ID. If the number key is not associated to an entry, a negative indicator tone sounds. 2 Press the PTT button to make the call. The LED lights up solid green, the radio unmutes and the response sounds through the radios speaker. The Group/Private Call icon appears in the top right corner. The first text line shows the caller alias. The second text line displays either the call status for a Private Call or All Call for All Call.. 3 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 4 Release the PTT button to listen. When the target radio responds, the LED blinks green, the radio unmutes and the response sounds through the radio's speaker.. i M a k n g a n d R e c e i i v n g C a l l s 5 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases 37 English the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. Radio returns to the screen you were on prior to initiating the call. For a Private Call, you hear a short tone when the call ends. See Assigning an Entry to a Programmable Number Key on page 57 for details on assigning an entry to a number key on the keypad. If the call-setup is successful, the DTMF tone sounds. You hear the dialing tone of the telephone user. The first text line shows the subscriber alias. The Phone Call icon remains in the top right corner. If call-setup is unsuccessful, a tone sounds and the display shows Phone Call Failed. Your radio returns to the Access Code input screen. If the access code was preconfigured in the Contacts list, the radio returns to the screen you were on prior to initiating the call. Making a Phone Call with the Programmable Phone Button 1 Press the programmed Phone button to enter into the Phone Entry list. 2 to the required subscriber alias or ID, and press or to select. If the access code was not preconfigured in the Contacts list, the display shows Access Code:. Enter the access code and press the The LED lights up solid green. The Phone Call icon appears in the top right corner. The first text line shows the subscriber alias. The second text line displays the call status. button to proceed. 38 English 3 Press the PTT button to talk and release it to listen. 4 To enter extra digits, if requested by the Phone Call, do one of the following. Press any keypad key to begin the input of the extra digits. The first line of the display shows Extra Digits:. The second line of the display shows a blinking cursor. Enter the extra digits and press the button to proceed. The DTMF tone sounds and the radio returns to the previous screen. Press One Touch Access button. The DTMF tone sounds. If the entry for the One Touch Access button is empty, a negative indicator tone sounds. 5 Press to end the call. button to proceed. The If deaccess code was not preconfigured in the Contacts list, the first line of the display shows De-Access Code:. The second line of the display shows a blinking cursor. Enter the deaccess code and press the radio returns to the previous screen. The DTMF tone sounds and the display shows Ending Phone Call. If the end-call-setup is successful, a tone sounds and the display shows Call Ended. If the end-call-setup is unsuccessful, your radio returns to the Phone Call screen. Repeat Steps 3 and 4 or wait for the telephone user to end the call. When you press PTT button while in the Phone Contacts screen, a tone sounds and the display shows Press OK to Place Phone Call. When the telephone user ends the call, a tone sounds and the display shows Phone Call Ended. If the call ends while you are entering the extra digits requested by the Phone Call, your radio returns to the screen you were on prior to initiating the call. Note:

During channel access, press to dismiss the call attempt and a tone sounds. i M a k n g a n d R e c e i i v n g C a l l s Note: During the call, when you press One Touch Access button with the deaccess code preconfigured or enter the deaccess code as the input for extra digits, your radio attempts to end the call. Note: The access or deaccess code cannot be more than 10 characters. Stopping a Radio Call This feature allows you to stop an ongoing Group or Private Call to free the channel for transmission. For example, when a radio experiences a stuck microphone condition where the PTT button is inadvertently pressed by the user. Your radio must be programmed to allow you to use this feature. 1 Press the programmed Transmit Interrupt Remote Dekey button, while on the relevant channel. 2 Wait for acknowledgment. The radio sounds a positive indicator tone and the display shows Remote Dekey Success, indicating that the channel is now free. The display shows Call Interrupted, and the radio sounds a negative indicator tone until the PTT 39 English button is released, if it is transmitting an interruptible call that is stopped via this feature. OR The radio sounds a negative indicator tone and the display shows Remote Dekey Failed. 3 4 or or to Radio Settings and press to select. to Talkaround and press to select. You can also use or to change the selected option. Talkaround You can continue to communicate when your repeater is not operating, or when your radio is out of the repeaters range but within talking range of other radios. This is called talkaround. Note: This feature is not applicable in Capacity Plus and Linked Capacity Plus. The Talkaround setting is retained even after powering down. You can toggle between talkaround and repeater modes by pressing the programmed Repeater/Talkaround button OR using the radio menu as described next. 1 to access the menu. or to Utilities and press to select. 2 40 English 5 Press to enable/disable the Talkaround. The display shows The disappears from beside Enabled. beside Enabled. Monitoring Features Monitoring a Channel Use the Monitor feature to make sure a channel is clear before transmitting. This feature is not applicable in Capacity Plus and Linked Capacity Plus. 1 Press and hold the programmed Monitor button and listen for activity. The Monitor icon appears on the display and the LED lights up solid yellow. You hear radio activity or total silence, depending on how your radio is programmed. This indicates that the channel is in use. 2 Wait until you hear white noise. This indicates that the channel is free. 3 Press the PTT button to talk and release it to listen. Permanent Monitor Use the Permanent Monitor feature to continuously monitor a selected channel for activity. Note: This feature is not applicable in Capacity Plus and Linked Capacity Plus. 1 Press the programmed Permanent Monitor button to activate permanent monitoring of the channel. Radio sounds an alert tone, the LED lights up solid yellow, and the display shows Permanent Monitor On. The Monitor icon appears on the display. 2 Press the programmed Permanent Monitor button to exit Permanent Monitor mode. Radio sounds an alert tone, the LED turns off, and display shows Radio sounds an alert tone, the LED turns off, and display shows Permanent Monitor Off. i M a k n g a n d R e c e i i v n g C a l l s 41 English Sending a Radio Check 1 Access the Radio Check feature. ............................. Advanced Features The following topics are covered:

Radio Check ............................................................ 42 Remote Monitor........................................................ 43 Scan Lists ............................................................... 44 Scan ...................................................................... 48 Contact Settings ....................................................... 50 Call Indicator Settings ................................................ 60 Call Log Features ..................................................... 64 Call Alert Operation ................................................... 66 Emergency Operation ................................................ 67 Text Message Features .............................................. 72 Job Tickets .............................................................. 86 Privacy ................................................................... 90 Covert Mode ............................................................ 91 Dual Tone Multi Frequency (DTMF) .............................. 92 Multi-Site Controls..................................................... 92 Security .................................................................. 95 Lone Worker ............................................................ 97 Password Lock Features ............................................ 97 Bluetooth Operation ................................................. 100 Notification List........................................................ 104 Over-the-Air-Programming (OTAP) .............................. 105 Utilities .................................................................. 105 Radio Check 42 English If enabled, this feature allows you to determine if another radio is active in a system without disturbing the user of that radio. No audible or visual notification is shown on the target radio. Radio Control Programmed Radio Check button Menu Steps 2 Wait for acknowledgement. a. Press the programmed Radio Check button. or to the required subscriber alias or ID and press to select. to access the menu or to select to Contacts and press b. a. b. c. Use one of the steps described next to select the required subscriber alias or ID select the subscriber alias or ID directly or to the required subscriber to select. alias or ID and press use the Manual Dial menu or press or press to Manual Dial and to select. to Radio Number and to select. If there was previously dialed ID, the ID appears along with a blinking cursor. Else, the first line of the display shows Radio Number:; the second line of the display shows a button is pressed when the radio is waiting for If the acknowledgement, a tone sounds, and the radio terminates all retries and exits Radio Check mode. If Radio Check is successful, a positive indicator tone sounds and the display shows positive mini notice. If Radio Check is unsuccessful, a negative indicator tone sounds and the display shows negative mini notice. Radio returns to the subscriber alias or ID screen. A d v a n c e d F e a t u r e s Remote Monitor Use the Remote Monitor feature to turn on the microphone of a target radio (subscriber alias or IDs only). No audible or visual indication is given to the target radio. You can use this feature to monitor, remotely, any audible activity surrounding the target radio. Your radio must be programmed to allow you to use this feature. Initiating Remote Monitor 1 Access the Remote Monitor feature. 43 English Steps 2 Wait for acknowledgement. Radio Control Programmed Remote Monitor Button Menu a. Press the programmed Remote Monitor button. or to the required subscriber b. a. b. alias or ID and press to select. to access the menu or to select to Contacts and press c. Use one of the steps described next to select the required subscriber alias or ID select the subscriber alias or ID directly or to the required subscriber to select. alias or ID and press use the Manual Dial menu or press or press to Manual Dial and to select. to Radio Number and to select. If there was previously dialed ID, the ID appears along with a blinking cursor. Else, the first line of the display shows Radio Number:; the second line of the display shows a 44 English If successful, a positive indicator tone sounds and the display shows positive mini notice. Your radio starts playing audio from the monitored radio for a programmed duration and display shows Rem. Monitor. Once the timer expires, the radio sounds an alert tone and the LED turns off. If unsuccessful, the radio sounds a negative indicator tone the display shows negative mini notice. Scan Lists Scan lists are created and assigned to individual channels/

groups. Your radio cycles through the programmed scan list for the current channel looking for voice activity. At each channel in the cycle the radio also cycles through the group list for that channel. Your radio can support up to 250 scan lists, with a maximum of 16 members in a list. You can add, delete, or prioritize channels by editing a scan list. You can attach a new scan list to your radio via Front Panel Programming. Note: This feature is not applicable in Capacity Plus and Linked Capacity Plus. Viewing an Entry in the Scan List 1 2 to access the menu. or to Scan and press to select. Viewing an Entry in the Scan List by Alias Search Adding a New Entry to the Scan List Editing the Scan List 1 2 3 to access the menu. or or to Scan and press to select. to View/Edit List and press to select. to select. A d v a n c e d F e a t u r e s 1 2 to access the menu. or to Scan and press to select. or 3 4 Key in the first character of the required alias. to View/Edit List and press A blinking cursor appears. 5 Use the keypad to type the required alias. to move one space to the left. Press to move key to delete any Press one space to the right. Press the unwanted characters. The first line of the display shows the characters you keyed in. The second line of the display shows an alias that matches what you have keyed in. The alias search is case-insensitive. If there are two or more entries with the same name, the radio displays the entry that is listed first in the scan list. or 4 5 Select the required alias or ID by to Add Member and press to select. 45 English Steps 7 or to the required alias or ID. to the required priority level and press or select. The display shows Entry Saved, followed immediately by Add Another?. to Radio Control Radio Navigation Buttons Keypad Key in the first character of the required alias. A blinking cursor appears. key to delete any unwanted to change the to move one space to the left. to move one space to the right. Press Press Press the characters. Long press text entry method. The first line of the display shows the characters you keyed in. The next lines of the display show the short listed search results. The alias search is case-insensitive. If there are two or more aliases with the same name, the radio displays the alias that is listed first in the list. 8 Do one of the following:

or to Yes and press Steps 5 to 7 . to select, and repeat or to No and press to save the current list. Deleting an Entry from the Scan List 1 2 to access the menu. or to Scan and press to select. or 3 4 Select the required alias or ID by to View/Edit List and press to select. 6 Press to select. 46 English Radio Control Radio Navigation Buttons Keypad Steps or to the required alias or ID. or 6 7 Do one of the following:

to Delete and press to select. At Delete Entry?, to Yes and press delete entry. The display shows Entry Deleted. or to Key in the first character of the required alias. A blinking cursor appears. or screen. to No and press to return to the previous key to delete any unwanted to change the to move one space to the left. to move one space to the right. Press Press Press the characters. Long press text entry method. The first line of the display shows the characters you keyed in. The next lines of the display show the short listed search results. The alias search is case-insensitive. If there are two or more aliases with the same name, the radio displays the alias that is listed first in the list. 8 Repeat Steps 4 to 7 to delete other entries. After deleting all required aliases or IDs, long press to return to the Home screen. Setting and Editing Priority for an Entry in the Scan List 1 2 to access the menu. or to Scan and press to select. A d v a n c e d F e a t u r e s 5 Press to select. or 3 4 Select the required alias or ID by to View/Edit List and press to select. 47 English Radio Control Radio Navigation Buttons Keypad Steps or to the required alias or ID. 6 7 Key in the first character of the required alias. A blinking cursor appears. or to Edit Priority and press to select. to the required priority level and press or select. The display shows Entry Saved before returning to the previous screen. Note:

to The Priority icon appears left of the members name. There is no Priority icon if priority is set to None. key to delete any unwanted to change the to move one space to the left. to move one space to the right. Press Press Press the characters. Long press text entry method. The first line of the display shows the characters you keyed in. The next lines of the display show the short listed search results. The alias search is case-insensitive. If there are two or more aliases with the same name, the radio displays the alias that is listed first in the list. 5 Press to select. 48 English Scan When you start a scan, your radio cycles through the programmed scan list for the current channel looking for voice activity. The LED blinks yellow and you see the Scan icon on the display. There are two ways of initiating scan:

Main Channel Scan (Manual): Your radio scans all the channels/groups in your scan list. On entering scan, your radio may depending on the settings automatically start on the last scanned active channel/group or on the channel where scan was initiated. Auto Scan (Automatic): Your radio automatically starts scanning when you select a channel/group that has Auto Scan enabled. Note: This feature is not applicable in Capacity Plus and Linked Capacity Plus. Setting an Active Scan List 1 Use the Channel Selector Knob to select a channel programmed with a scan list. 2 3 to access the menu. or to Scan and press to select. The display shows Turn On if scan is disabled. The display shows Turn Off if scan is enabled. 1 2 3 4 to access the menu. or or or to Scan and press to select. 4 Press to select. to Set Active List and press to select. to the required list and press to select. The LED blinks yellow and the Scan icon is displayed, when Scan is enabled. The LED turns off and the Scan icon is not displayed, when Scan is disabled. A d v a n c e d F e a t u r e s The list selected will be your active scan list. Starting and Stopping Scan While scanning, the radio will only accept data (e.g. text message, location, telemetry, or PC data) if received on its Selected Channel. You can start and stop scanning by pressing the programmed Scan button OR follow the procedure described next. Responding to a Transmission During a Scan During scanning, your radio stops on a channel/group where activity is detected. Your radio unmutes and the incoming call sounds through the radio's speaker.The radio stays on that channel while the activity is present and for a programmed time period known as hang time. 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from 49 English your mouth. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. 2 Press the PTT button during hang time. The LED lights up solid green. 1 When your radio locks on to an unwanted or nuisance channel, press the programmed Nuisance Channel Delete button until you hear a tone. 2 Release the Nuisance Channel Delete button. The nuisance channel is deleted. 3 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. 4 Release the PTT button to listen. If you do not respond within the hang time, the radio returns to scanning other channels/groups. Restoring a Nuisance Channel To restore the deleted nuisance channel, do one of the following:

Turn the radio off and then power it on again. Stop and restart a scan via the programmed Scan button or menu. Deleting a Nuisance Channel If a channel continually generates unwanted calls or noise

(termed a nuisance channel), you can temporarily remove the unwanted channel from the scan list. This capability does not apply to the channel designated as the Selected Channel. Deleting a nuisance channel is only possible through the programmed Nuisance Channel Delete button. This feature is not accessible through the menu. 50 English Change channel or zone. Contact Settings Contacts provides address-book capabilities on your radio. Each entry corresponds to an alias or ID that you use to initiate a call. Each entry, depending on context, associates with one of five types of calls: Group Call, Private Call, All Call, PC Call or Dispatch Call. PC Call and Dispatch Call are data-related. They are only available with the applications. Refer to the data applications documentation for more information. Note:

If the Privacy feature is enabled on a channel, you can make privacy-enabled Group Call, Private Call, and All Call on that channel. Only target radios with the same Privacy Key OR the same Key Value and Key ID as your radio will be able to unscramble the transmission. See Privacy on page 90 for more information. Additionally, Contacts menu allows you to assign each entry to a programmable number key or more on a keypad. If an entry is assigned to a number key, your radio can perform a quick dial on the entry. Your radio supports maximum of 1000 Contact list entries. Each entry within Contacts displays the following information:

Call Type Call Alias Call ID Note: You can add or edit subscriber IDs for the Digital Contacts list. A d v a n c e d F e a t u r e s Making a Group Call from Contacts 1 2 to access the menu. or to Contacts and press to select. The entries are alphabetically sorted. or 3 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from to the required group alias or ID. your mouth. 5 Press the PTT button to make the call. The LED lights up solid green. The first line displays the subscriber alias or ID. The second line displays Private Call and the Private Call icon 6 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 7 Release the PTT button to listen. When any user in the group responds, the LED blinks green, the display shows the transmitting user's ID, the radio unmutes and the response sounds through the radio's speaker. 51 English 8 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. 9 You hear a short tone. The display shows Call Ended. Making a Private Call from Contacts 1 2 to access the menu. or to Contacts and press to select. The entries are alphabetically sorted. 3 Use one of the steps described next to select the required subscriber alias or ID:

select the subscriber alias or ID directly or press to the required subscriber alias or ID and to select. use the Manual Dial menu or to Manual Dial and press to select. 52 English or to Radio Number and press to select. If there was previously dialed ID, the ID appears along with a blinking cursor. Else, the first line of the display shows Radio Number:; the second line of the display shows a blinking cursor. Use the keypad to edit/enter the ID. Press to select. 4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 5 Press the PTT button to make the call. The LED lights up solid green. The first line displays the subscriber alias or ID. The second line displays Private Call and the Private Call icon. 6 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 7 Release the PTT button to listen. When the target radio responds, the LED blinks green and the display shows the transmitting user's ID. the radio unmutes and the response sounds through the radio's speaker. 8 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a predetermined period of time, the call ends. The display shows Call Ended. Making a Phone Call from Contacts 1 2 to access the menu. or to Contacts and press to select. The entries are alphabetically sorted. 3 Use one of the steps described next to select the required subscriber alias or ID:

select the subscriber alias or ID directly or press to the required subscriber alias or ID and to select. use the Manual Dial menu or or to Manual Dial and press to select. to Phone Number and press to select. A d v a n c e d F e a t u r e s The first line of the display shows Phone Number: , the second line of the display shows a blinking cursor. Use the keypad to enter a telephone number, and press to select the entered number. If the entry selected is empty, a negative indicator tone sounds and the display shows Phone Call Invalid # . When you press PTT button while in the Phone Contacts screen, a negative indicator tone sounds and the display shows Press OK to Place Phone Call. or 4 5 If the access code was not preconfigured in the Contacts to Call Phone and press to select. list, the first line of the display shows Access Code: . The second line of the display shows a blinking cursor. Enter the access code and press to proceed. During channel access, press to dismiss the call attempt and a negative indicator tone sounds. Your radio returns to the Call Phone screen. The access code cannot be more than 10 characters. The first line of the display shows Calling. The second line of the display shows the subscriber alias or ID, and the Phone Call icon. 53 English If successful, the DTMF tone sounds. You hear the dialing tone of the telephone user. The first line of the display shows the subscriber alias or ID, and the RSSI icon. The second line of the display shows Phone Call and the Phone Call icon. If unsuccessful, a tone sounds and the display shows Phone Call Failed. Your radio returns to the Access Code input screen. If the access code was preconfigured in the Contacts list, the radio returns to the screen you were on prior to initiating the call. 6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 7 Do one of the following:

Press the PTT button to talk and release it to listen. 54 English Note:

The RSSI icon disappears during transmission. To enter extra digits, if requested by the Phone Call, press any keypad key to begin the input of extra digits. The first line of the display shows Extra Digits: . The second line of the display shows a blinking cursor. Enter the extra digits and press to proceed. The DTMF tone sounds and the radio returns to the previous screen. If the call ends while you are entering the extra digits requested by the Phone Call, your radio returns to the screen you were on prior to initiating the call. Press One Touch Access button. Note:

The DTMF tone sounds. If the entry for the One Touch Access button is empty, a negative indicator tone sounds. During the call, when you press One Touch Access button with the deaccess code preconfigured or enter the deaccess code as the input for extra digits, your radio attempts to end the call. During channel access and access/deaccess code or extra digits transmission, your radio responds to On/ Off/Volume Control Knob and Channel Selector Knob only. A tone sounds for every invalid input. to proceed. to end the call. 8 Press 9 If deaccess code was not preconfigured in the Contacts list, the first line of the display shows De-Access Code:. The second line of the display shows a blinking cursor. Enter the deaccess code and press The deaccess code cannot be more than 10 characters. The DTMF tone sounds and the display shows Ending Phone Call. If successful, a tone sounds and the display shows Phone Call Ended. Your radio returns to the Call Phone screen. If unsuccessful, your radio returns to the Phone Call screen. Repeat Steps 8 and 9 or wait for the telephone user to end the call. When the telephone user ends the call, a tone sounds and the display shows Phone Call Ended. Making a Call Alias Search You can also use alias or alphanumeric search to retrieve the required subscriber alias. This feature is only applicable while in Contacts. A d v a n c e d F e a t u r e s Note:

button or to exit alias Press search. If you release the PTT button while the radio is setting up the call, it exits without any indication and returns to the previous screen. Your radio may be programmed to perform a radio presence check prior to setting up the Private Call. If the target radio is not available, you hear a short tone and see negative mini notice on the display. 1 2 to access the menu. or to Contacts and press to select. The entries are alphabetically sorted. 3 Key in the first character of the required alias. A blinking cursor appears. 4 Use the keypad to type the required alias. to move one space to the left. Press Press one space to the right. Press the to move key to delete any 55 English to change text unwanted characters. Long press entry method. The first line of the display shows the characters you keyed in. The next lines of the display show the short listed search results. The alias search is case-insensitive. If there are two or more entries with the same name, the radio displays the entry that is listed first in the Contacts list. 5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 6 Press the PTT button to make the call. The LED lights up solid green. The display shows the destination alias. 7 Wait for the Talk Permit Tone to finish (if enabled), and speak clearly into the microphone. 8 Release the PTT button to listen. When the target radio responds, the LED blinks green, the radio unmutes and the response sounds through the radios speaker. 9 If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. 56 English If there is no voice activity for a predetermined period of time, the call ends. The display shows Call Ended. Making a Group, Private, Phone or All Call by Alias Search You can also use alias or alphanumeric search to retrieve the required subscriber alias. This feature is only applicable while in Contacts. Note:

button or to exit alias Press search. If you release the PTT button while the radio is setting up the call, it exits without any indication and returns to the previous screen. Your radio may be programmed to perform a radio presence check prior to setting up the Private Call. If the target radio is not available, you hear a short tone and see Party Not Available on the display; the radio returns to the menu prior to initiating the radio presence check. 1 to access the menu. 2 or to Contacts and press to select. The entries are alphabetically sorted. 3 Key in the first character of the required alias. A blinking cursor appears. 4 Use the keypad to type the required alias. to move one space to the left. Press to move key to delete any Press one space to the right. Press the unwanted characters. The first line of the display shows the characters you keyed in. The second line of the display shows an alias that matches what you have keyed in. The alias search is case-insensitive. If there are two or more entries with the same name, the radio displays the entry that is listed first in the Contacts list. or 5 6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from to scroll to desired entry, if necessary. your mouth. 7 Press the PTT button to make the call. The LED lights up solid green. The first line displays the target radios ID. The second line displays the call type and the Call icon. 8 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. 9 Release the PTT button to listen. When the target radio responds, the LED blinks green. 10 If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond. If there is no voice activity for a programmed period of time, the call ends. You hear a short tone. The display shows Call Ended. A d v a n c e d F e a t u r e s Assigning an Entry to a Programmable Number Key Note: See Making a Group, Private or All Call with the Programmable Number Key on page 37 for details on making a Group, Private or All Call with the programmed number key(s). 57 English 1 2 3 4 5 to access the menu. or to Contacts and press to select. The entries are alphabetically sorted. or select. to the required alias or ID and press to or to Program Key and press to select. to the desired number key and press or select. If the number key is currently assigned to another entry, the display shows The Key is Already Assigned and then, the first line of the display shows Overwrite?. Do one of the following. to is before Empty, that number key is not an entry. If the assigned. If a number key is assigned to an entry in a particular mode, this feature is not supported when you long press the number key in another mode. The radio sounds a positive indicator tone and the display shows Contact Saved. The screen automatically returns to the previous menu. Removing the Association between Entry and Programmable Number Key 1 Access the required alias or ID via:

or to Yes and press key assignment. to overwrite the number or step. to No and press to return to the previous Each entry can be associated to different number keys. before each number key that is assigned to You see a 58 English Radio Control Programmed number key Menu Steps Long press the programmed number key to the required alias or ID; press to select. Note: When an entry is deleted, the association between the entry and its programmed number key(s) is removed. The radio sounds a positive indicator tone and the display shows Contact Saved. The screen automatically returns to the previous menu. a. b. c. to access the menu or to Contacts and press to select. The entries are alphabetically sorted. or to the required subscriber alias or ID and press to select. 2 3 4 or or to Program Key and press to select. to Empty and press to select. The first line of the display shows Clear from all keys? . or to Yes and press to select. Adding a New Contact to access the menu. 1 2 3 4 or or or to Contacts and press to select. to New Contact and press to select. to the required contact type, either Radio to select. Contact or Phone Contact, and press 5 Use the keypad to enter the contact number and press to confirm. 6 Use the keypad to enter the contact name and press confirm. to 59 English A d v a n c e d F e a t u r e s 7 If adding a Radio Contact, or to the required ringer Call Indicator Settings type and press The radio sounds a positive indicator tone and the display shows positive mini notice. to select. Sending a Message to a Contact 1 2 3 4 5 6 to access the menu. or or or to Contacts and press to select. to New Contact and press to select. to the required contact type, either Radio to select. Contact or Phone Contact, and press or or to the required alias and press to select. to Send Message and press to select. 7 Press to send the message. 60 English Activating and Deactivating Call Ringers for Call Alert You can select, or turn on or off ringing tones for a received Call Alert. to access the menu. or or or or or 1 2 3 4 5 6 7 to Utilities and press to select. to Radio Settings and press to select. to Tones/Alert and press to select. to Call Ringers and press to select. to Call Alert and press

. The current tone is indicated by a to select. or to the required tone and press to select. You can also use or to change the selected option. appears beside selected tone. Activating and Deactivating Call Ringers for Private Calls You can turn on or off the ringing tones for a received Private Call. 1 2 3 4 5 6 to access the menu. or or or or or to Utilities and press to select. to Radio Settings and press to select. to Tones/Alerts and press to select. to Call Ringers and press to select. to Private Call and press to select. You can also use or to change the selected option. A d v a n c e d F e a t u r e s beside Enabled, if Private Call ringing The display shows tones are enabled. The ringing tones are disabled. disappears from beside Enabled, if Private Call Activating and Deactivating Call Ringers for Text Message You can turn on or off the ringing tones for a received Text Message. 1 2 3 4 5 6 to access the menu. or or or or or to Utilities and press to select. to Radio Settings and press to select. to Tones/Alerts and press to select. to Call Ringers and press to select. to Text Message and press to select. 7 Press to enable/disable the Private Call ringing tones. The current tone is indicated by a

. 61 English 7 or to the required tone and press to select. appears beside selected tone. Activating and Deactivating Call Ringers for Telemetry Status with Text You can turn on or off the ringing tones for a received Telemetry Status with Text. to access the menu. 1 2 3 4 5 6 or or or or or to Utilities and press to select. to Radio Settings and press to select. to Tones/Alerts and press to select. to Call Ringers and press to select. to Telemetry and press

. The current tone is indicated by a to select. 7 Do one of the following:

62 English or to the preferred tone and press to select. The display shows Tone <Number> Selected and a appears left of the selected tone. or to Turn Off and press display shows Telemetry Ringer Off and a left of Turn Off. to select. The appears Assigning Ring Styles You can program your radio to sound one of ten predefined ringing tones when receiving a Call Alert or a Text Message from a particular contact. The radio sounds out each ring style as you navigate through the list. 1 2 3 to access the menu. or to Contacts and press to select. The entries are alphabetically sorted. or select. to the required alias or ID and press to 4 5 6 7 or or to View/Edit and press to select. to Ringer and press to select. to required ring style and press or indicates the current selected tone. A to select. or to the required tone and press appears beside selected tone. The display shows Contact Saved. to select. All Tones 1 to access the menu. or 2 3 Go to Radio Settings. SelectTones/Alerts. Select All to Utilities and press to select. Tones. Toggle All Tones to be enabled or disabled. Ring Alert Type Selection You can program your the radio calls to one predeternined vibrate call. If All Tones status is disabled, the radio displays the All Tone Mute icon. If All Tones status is enabled, the related ring alert type is displayed. The radio sounds one vibration if it is a momentary ring style. The radio will vibrate repetitively if it is a repetitive ring style. When set to Ring & Vibrate, the radio sounds a specific ring tone if there is any incoming radio transaction (i.e. Call Alert, Message or Job Ticket). It sounds like a good key tone or missed call. If the notification list is not empty, the radio repeats a vibration every 5 minutes. A d v a n c e d F e a t u r e s 1 to access the menu. or 2 3 Go to Radio Settings. Select Tones/Alerts. Select to Utilities and press to select. Ring Alert Type. 4 Choose from one of the following:

Ring Vibrate Vibrate & Ring Silent 63 English to Radio Settings and press to select. Viewing Recent Calls 1 2 3 4 5 or or or or Escalating Alarm Tone Volume You can program your radio to continually alert you when a radio call remains unanswered. This is done by automatically increasing the alarm tone volume over time. This feature is known as Escalert. to access the menu. to Utilities and press to select. to Tones/Alerts and press to select. to Escalert and press to select. You can also use or to change the selected option. 6 Press to enable/disable the Escalert. The display shows The disappears from beside Enabled. beside Enabled. 64 English Call Log Features Your radio keeps track of all recent outgoing, answered, and missed Private Calls. Use the call log feature to view and manage recent calls. You can perform the following tasks in each of your call lists:

Store ID to Contacts Delete View Details The lists are Missed, Answered, and Outgoing. 1 2 3 4 to access the menu. or or to Call Log and press to select. to preferred list and press to select. The display shows the most recent entry at the top of the list. or to view the list. Press the PTT button to start a Private Call with the current selected alias or ID. Missed Call Screen Whenever a call is missed, your radio displays a missed call message in the notification list. The display shows Missed Calls. Do one of the following:

Press to view the missed call ID. The missed call log list appears on display. Press to store or delete the entry. Storing an Alias from a Call List You can also store an ID without an alias. 1 2 3 4 to access the menu. or or or to Call Log and press to select. to the required list and press to select. to Store and press to select. Deleting a Call from a Call List 1 2 3 to access the menu. or or to Call Log and press to select. to the required list and press to select. When you select a call list and it contains no entries, the display shows List Empty, and sounds a low tone if Keypad Tones are turned on (see Turning Keypad Tones On or Off on page 106). A d v a n c e d F e a t u r e s 4 or select. to the required alias or ID and press to or 5 6 Do one of the following:

to Delete Entry? and press to select. Press to select Yes to delete the entry. The display shows Entry Deleted. A blinking cursor appears. If needed, key in the alias for that ID and press

. The display shows positive mini notice. or to No, and press the the previous screen. button to return to 65 English Viewing Details from a Call List 1 2 3 4 5 to access the menu. or or or select. to Call Log and press to select. to the required list and press to select. to the required alias or ID and press to or to View Details and press to select. Display shows details. Call Alert Operation Call Alert paging enables you to alert a specific radio user to call you back when they are able to do so. This feature is applicable for subscriber aliases or IDs only and is accessible through the menu via Contacts or manual dial. 66 English Receiving and Responding to a Call Alert When you receive a Call Alert page, you see the notification list listing a Call Alert with the alias or ID of the calling radio on the display. When you , do one of the following:

Press the PTT button while the display still shows the Call Alert in the Notification List to respond with a Private Call. Press to exit the Notification List. The alert is moved to the Missed Call Log. See Notification List on page 104 for details about the Notification List. See Call Log Features on page 64 for details about the Missed Call List. Making a Call Alert from the Contact List 1 to access the menu. or 2 3 Use one of the steps described next to select the required to Contacts and press to select. subscriber alias or ID:

select the subscriber alias or ID directly or press to the required subscriber alias or ID and to select. use the Manual Dial menu or to Manual Dial and press to select. or to Radio Contact and press The first line of the display shows Radio Number: , the second line of the display shows a blinking cursor. Enter the subscriber ID you want to page and press to select. Making a Call Alert with the One Touch Access Button Press the programmed One Touch Access button to make a Call Alert to the predefined alias or ID. The display shows Call Alert and the subscriber alias or ID, indicating that the Call Alert has been sent. The LED lights up solid green when your radio is sending the Call Alert. If the Call Alert acknowledgement is received, the display shows positive mini notice. If the Call Alert acknowledgement is not received, the display shows negative mini notice. A d v a n c e d F e a t u r e s 4 or to Call Alert and press to select. Emergency Operation The display shows Call Alert and the subscriber alias or ID, indicating that the Call Alert has been sent. The LED lights up solid green when your radio is sending the Call Alert. If the Call Alert acknowledgement is received, the display shows positive mini notice. If the Call Alert acknowledgement is not received, the display shows negative mini notice. An Emergency Alarm is used to indicate a critical situation. You are able to initiate an Emergency at any time on any screen display even when there is activity on the current channel. Your dealer can set the duration of a button press for the programmed Emergency button, except for long press, which is similar with all other buttons:

The Emergency button is assigned with the Emergency On/Off feature. Check with your dealer for the assigned operation of the Emergency button. 67 English Note:

If the short press for the Emergency button is assigned to turn on the Emergency mode, then the long press for the Emergency button is assigned to exit the Emergency mode. If the long press for the Emergency button is assigned to turn on the Emergency mode, then the short press for the Emergency button is assigned to exit the Emergency mode. Your radio supports three Emergency Alarms:

Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow Note: Only ONE of the Emergency Alarms above can be assigned to the programmed Emergency button. In addition, each alarm has the following types:

Regular Radio transmits an alarm signal and shows audio and/or visual indicators. Silent Radio transmits an alarm signal without any audio or visual indicators. Radio receives calls without any sound through the radios speaker, until you press the PTT button to initiate the call. 68 English Silent with Voice Radio transmits an alarm signal without any audio or visual indicators, but allow incoming calls to sound through the radios speaker. Receiving an Emergency Alarm On receiving an emergency alarm the emergency icon appears, a tone sounds, the LED blinks red and the radio displays the emergency caller alias. If more than one alarm has occurred all emergency caller aliases are displayed in an Alarm List. 1 When receiving an emergency alarm, do one of the following:

If a single emergency call alias is displayed, press to view more details. press details. again to view your action If the multiple emergency caller aliases are displayed in to the required alias and press again to view your to view more details. Press the Alarm List, or action items. 2 Press and select Yes to exit the Alarm List. To revisit the Alarm List, press Alarm List. to access the menu and select Responding to an Emergency Alarm the Group Call icon, the group ID, and transmitting radio ID on your display. 1 In the Alarm List, 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from to the required alias. or your mouth. If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is now available for use. 3 Press PTT button to transmit non-emergency voice to the same group that the Emergency Alarm was targeted to. Emergency voice can only be transmitted by the emergency initiating radio. All other radios (including the emergency receiving radio) transmit non-emergency voice. The LED lights up solid green. Your radio remains in the Emergency mode. 4 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. 5 Release the PTT button to listen. When the emergency initiating radio responds, the LED blinks green, the LED blinks green, the radio unmutes and the response sounds through the radio's speaker.You see A d v a n c e d F e a t u r e s 6 Your radio displays the Alarm List. Sending an Emergency Alarm This feature allows you to send an Emergency Alarm, a non-voice signal, which triggers an alert indication on a group of radios. If your radio is set to Silent, it will not display any audio or visual indicators during Emergency mode. Press the programmed Emergency On button. The display shows Tx Alarm and the destination alias. The LED lights up solid green and the Emergency icon appears on the Home screen display. When an Emergency Alarm acknowledgment is received, the Emergency tone sounds and the LED blinks green. The display shows Alarm Sent. If your radio does not receive an Emergency Alarm acknowledgement, and after all retries have been exhausted, a tone sounds and the display shows Alarm Failed. Radio exits the Emergency Alarm mode and returns to the Home screen. 69 English Sending an Emergency Alarm with Call This feature allows you to send an Emergency Alarm to a group of radios. Upon acknowledgement by a radio within the group, the group of radios can communicate over a programmed Emergency channel. If your radio is set to Silent, it will not display any audio or visual indicators during Emergency mode, or allow any received calls to sound through the radios speaker, until you press the PTT button to initiate the call. If your radio is set to Silent with Voice, it will not display any audio or visual indicators during Emergency mode, but allow incoming calls to sound through the radios speaker. The indicators will only appear once you press the PTT button to initiate, or respond to, the call. 1 Press the programmed Emergency On button. The display shows Tx Alarm and the destination alias. The LED lights up solid green and the Emergency icon appears on the Home screen display. When an Emergency Alarm acknowledgment is received, the Emergency tone sounds and the LED blinks green. The display shows Alarm Sent. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press PTT button to make the call. 70 English The LED lights up solid green and the Group icon appears on the display. 4 Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone. 5 Release the PTT button to listen. If the Channel Free Indication feature is enabled, you hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond. 6 Press the PTT button to respond. 7 Once your call ends, press Emergency Off button to exit the Emergency mode. The radio returns to the Home screen. Sending an Emergency Alarm with Voice to Follow This feature allows you to send an Emergency Alarm to a group of radios. Your radios microphone is automatically activated, allowing you to communicate with the group of radios without pressing the PTT button. This activated microphone state is also known as hot mic. If your radio has Emergency Cycle Mode enabled, repetitions of hot mic and receiving period are made for a programmed duration. Note: During Emergency Cycle Mode, received calls sound through the radios speaker. If you press the PTT button during the programmed programmed receiving period, you will hear a prohibit tone, indicating that you should release the PTT button. The radio ignores the PTT press and remains in Emergency mode. Note:

If you press the PTT button during hot mic, and continue to press it after the hot mic duration expires, the radio continues to transmit until you release the PTT button. If your radio is set to Silent, it will not display any audio or visual indicators during Emergency mode, or allow any received calls to sound through the radios speaker, until the programmed hot mic transmission period is over, and you press the PTT button. If your radio is set to Silent with Voice, it will not display any audio or visual indicators during Emergency mode when you are making the call with hot mic, but allow sound through the radios speaker when the target radio responds after the programmed hot mic transmission period is over. The indicators will only appear when you press the PTT button. Note:

If the Emergency Alarm request fails, the radio does not retry to send the request, and enters the hot mic state directly. A d v a n c e d F e a t u r e s 1 Press the programmed Emergency On button. The display shows Tx Alarm and the destination alias. The LED lights up solid green and the Emergency icon is displayed. 2 Once the display shows Alarm Sent, speak clearly into the microphone. When hot mic has been enabled, the radio automatically transmits without a PTT press until the hot mic duration expires. While transmitting, the LED lights up solid green and the Emergency icon appears on the display. 3 The radio automatically stops transmitting when the cycling duration between hot mic and receiving calls expires, if Emergency Cycle Mode is enabled. 4 Once the hot mic duration expires, the radio automatically stops transmitting. To transmit again, press the PTT button. Reinitiating an Emergency Mode Note: This feature is only applicable to the radio sending the Emergency Alarm. There are two instances where this can happen:

You change the channel while the radio is in Emergency mode. This exits the Emergency mode. If Emergency 71 English Alarm is enabled on this new channel, the radio reinitiates Emergency. You press the programmed Emergency On button during an Emergency initiation/transmission state. This causes the radio to exit this state, and to reinitiate Emergency. Exiting Emergency Mode Note: This feature is only applicable to the radio sending the Emergency Alarm. Your radio exits Emergency mode when one of the following occurs:

Emergency Alarm acknowledgement is received (for Emergency Alarm only) All retries to send the alarm have been exhausted The Emergency Off button is pressed. Note:

If your radio is powered off, it exits the Emergency mode. The radio will not reinitiate the Emergency mode automatically when it is turned on again. If you change channels when your radio is in Emergency mode to a channel that has no emergency system configured, No Emergency is shown on your display. 72 English Text Message Features Your radio is able to receive data, for example a text message, from another radio or an e-mail application. The maximum length of characters for a text message, including the subject line (seen when receiving message from an e-mail application), is 140whereas for receiving this is 280 characters.. Note:

Long press the Home screen. at any time to return to Steps Writing and Sending a Text Message 1 Access the Text Message feature. Radio Controls Programmed Text Message button Menu Press the programmed Text Message button. a. b. to access the menu. or to select. to Messages and press 2 or to Compose and press to select. A blinking cursor appears. 3 Use the keypad to type your message. Press to move one space to the left. Press or the key to move one space to the right. Press the key to delete any unwanted characters. Long press to change text entry method. once message is composed. 4 Press 5 Depending on whether you want to send, save, re-edit, or delete the newly composed message, do one of the following. or to Send, and press to send the message. or to Save, and press to the Drafts folder. to save the message The display shows transitional mini notice, confirming your message is being sent. If the message is sent successfully, a tone sounds and the display shows positive mini notice. If the message cannot be sent, a low tone sounds and the display shows negative mini notice. If the text message fails to send, the radio returns you to the Resend option screen (see Managing Fail-to-Send Text Messages on page 77 Sending a Quick Text Message Your radio supports a maximum of 50 Quick Text messages as programmed by your dealer. While Quick Text messages are predefined, you can edit each message before sending it. 1 Access the Text Message feature. A d v a n c e d F e a t u r e s to edit the message. again to choose between deleting the message or saving it to the Drafts folder. 73 English Radio Controls Programmed Text Message button Menu Steps Press the programmed Text Message button. a. b. to access the menu. or to select. to Messages and press 2 3 or to Quick Text and press to select. to the required Quick Text and press or select. A blinking cursor appears. to 4 Use the keypad to edit the message, if required. Press to move one space to the left. Press or the key to move one space to the right. Press the 74 English key to delete any unwanted characters. Long press to change text entry method. once message is composed. 5 Press 6 Depending on whether you want to send, save, re-edit, or delete the newly composed message, do one of the following. or to Send, and press to send the message. or to Save, and press to the Drafts folder. to save the message to edit the message. again to choose between deleting the message or saving it to the Drafts folder. 7 If you are sending the message, select the recipient by or select. to the required alias or ID and press to or to select. The first line of the display shows Radio Number:. The to Manual Dial, and press second line of the display shows a blinking cursor. Key in the subscriber alias or ID and press

. The display shows , transitional mini notice, confirming your message is being sent. If the message is sent successfully, a tone sounds and the display shows positive mini notice. If the message cannot be sent, a low tone sounds and the display shows negative mini notice. If the text message fails to send, the radio returns you to the Resend option screen (see Managing Fail-to-Send Text Messages on page 77). Sending a Quick Text Message Press the programmed One Touch Access button to send a predefined Quick Text message to a predefined alias or ID. The display shows transitional mini notice, confirming your message is being sent. If the message is sent successfully, a tone sounds and the display shows positive mini notice. If the message cannot be sent, a low tone sounds and the display shows negative mini notice. If the text message fails to send, the radio returns you to the Resend option screen (see Managing Fail-to-Send Text Messages on page 77). Accessing the Drafts Folder You can save a text message to send it at a later time. If a PTT button press or a mode change causes the radio to exit the text message writing/editing screen while you are in the process of writing or editing a text message, your current text message is automatically saved to the Drafts folder. The most recent saved text message is always added to the top of the Drafts list. The Drafts folder stores a maximum of ten (10) last saved messages. When the folder is full, the next saved text message automatically replaces the oldest text message in the folder. Note:

Long press the Home screen. at any time to return to A d v a n c e d F e a t u r e s Viewing a Saved Text Message 1 Access the Text Message feature. 75 English Radio Controls Programmed Text Message button Menu Steps Press the programmed Text Message button. a. b. to access the menu. or to select. to Messages and press 3 Use the keypad to type your message. Press to move one space to the left. Press or the key to move one space to the right. Press the key to delete any unwanted characters. Long press to change text entry method. 4 Press 5 Select the message recipient by once message is composed. 2 3 or to Drafts and press to select. or select. to the required message and press to or select. to the required alias or ID and press to or to Manual Dial, and press to select. The first line of the display shows Radio Number:. The second line of the display shows a blinking cursor. Key in the subscriber alias or ID and press

. The display shows transitional mini notice, confirming your message is being sent. If the message is sent successfully, a tone sounds and the display shows positive mini notice. If the message cannot be sent, a low tone sounds and the display shows negative mini notice. Editing and Sending a Saved Text Message 1 Press again while viewing the message. 2 or to Edit and press to select. A blinking cursor appears. 76 English If the text message cannot be sent, it is moved to the Sent Items folder and marked with a Send Failed icon. 4 Press again while viewing the message. Steps Deleting a Saved Text Message from Drafts 1 Access the Text Message feature. Radio Controls Programmed Text Message button Menu Press the programmed Text Message button. a. b. to access the menu. or to select. to Messages and press 2 3 or to Drafts and press to select. or select. to the required message and press to 5 or message. to Delete and press to delete the text Managing Fail-to-Send Text Messages You can select one of the following options while at the Resend option screen:

Resend Forward Edit Note:

If the channel type (i.e. conventional digital or Capacity Plus or Linked Capacity Plus) is not a match, you can only edit and forward a Fail-to-Send message. Resending a Text Message A d v a n c e d F e a t u r e s to resend the same message to the same Press subscriber/group alias or ID. If the message is sent successfully, a tone sounds and the display shows positive mini notice. If the message cannot be sent, the display shows negative mini notice. 77 English Forwarding a Text Message Select Forward to send the message to another subscriber/

group alias or ID. or 1 to Forward and press 2 Select the message recipient by to select. Note:

If a subject line is present (for messages received from an e-mail application), you cannot edit it. 1 or to Edit and press to select. A blinking cursor appears. or select. to the required alias or ID and press to 2 Use the keypad to edit your message. or to Manual Dial, and press to select. The first line of the display shows Radio Number:. The second line of the display shows a blinking cursor. Key in the subscriber alias or ID and press

. The display shows Text Message: <Subscriber/Group Alias or ID>, confirming your message is being sent. If the message is sent successfully, a tone sounds and the display shows positive mini notice. If the message cannot be sent, a low tone sounds and the display shows negative mini notice. Editing a Text Message Select Edit to edit the message before sending it. 78 English Press to move one space to the left. Press or the key to move one space to the right. Press the key to delete any unwanted characters. Long press to change text entry method. once message is composed. 3 Press 4 Depending on whether you want to send, save, re-edit, or delete the newly composed message, do one of the following. or to Send, and press to send the message. or to Save, and press to the Drafts folder. to save the message to edit the message. again to choose between deleting the message or saving it to the Drafts folder. 5 If you are sending the message, select the recipient by Managing Sent Text Messages Once a message is sent to another radio, it is saved in Sent Items. The most recent sent text message is always added to the top of the Sent Items list. The Sent Items folder is capable of storing a maximum of thirty

(30) last sent messages. When the folder is full, the next sent text message automatically replaces the oldest text message in the folder. or select. to the required alias or ID and press to Note:

A d v a n c e d F e a t u r e s or to Manual Dial, and press to select. The first line of the display shows Radio Number:. The second line of the display shows a blinking cursor. Key in the subscriber alias or ID and press

. The display shows Text Message: <Subscriber/Group Alias or ID>, confirming your message is being sent. If the message is sent successfully, a tone sounds and the display shows positive mini notice. If the message cannot be sent, a low tone sounds and the display shows negative mini notice. Long press the Home screen. at any time to return to Steps Viewing a Sent Text Message 1 Access the Text Message feature. Radio Controls Programmed Text Message button Menu Press the programmed Text Message button. a. b. to access the menu. or to select. to Messages and press 79 English 1 Press 2 or to select. again while viewing the message. to one of the options described next and press Option Forward Edit Steps Select Forward to send the selected text message to another subscriber/group alias or ID (see Forwarding a Text Message on page 78). Select Edit to edit the selected text message before sending it (see Editing a Text Message on page 78). 2 3 or to Sent Items and press to select. to the required message and press or select. A subject line may be shown if the message is from an e-mail application. The icon at the top right corner of the screen indicates the status of the message (see Sent Item Icons on page 24). to Sending a Sent Text Message You can select one of the following options while viewing a sent text message:

Resend Forward Edit Delete Note:

If the channel type (i.e. conventional digital or Capacity Plus or Linked Capacity Plus) is not a match, you can only edit, forward, or delete a Sent message. 80 English Option Delete Resend Steps Select Delete to delete the text message. Select Resend to resend the selected text message to the same subscriber/group alias or ID. The display shows transitional mini notice, confirming that the same message is being sent to the same target radio. If the message is sent successfully, a tone sounds and the display shows positive mini notice. If the message cannot be sent, a low tone sounds and the display shows negative mini notice. If the message fails to send, the radio returns you to the Resend option screen. Press to resend the message to the same subscriber/group alias or ID. If you exit the message sending screen while the message is being sent, the radio updates the status of the message in the Sent Items folder without providing any indication in the display or via sound. If the radio changes mode or powers down before the status of the message in Sent Items is updated, the radio cannot complete any In-Progress messages and automatically marks it with a Send Failed icon. The radio supports a maximum of five (5) In-Progress messages at one time. During this period, the radio cannot send any new message and automatically marks it with a Send Failed icon. A d v a n c e d F e a t u r e s Deleting All Sent Text Messages from Sent Items 1 Access the Text Message feature. Note: Changing the volume, and pressing any button, except for

, returns you to

,

, or the message. Note: The radio exits the Resend option screen if you press the PTT button to initiate a Private or Group Call, or to respond to a Group Call. The radio also exits the screen when it receives a text or telemetry message, an 81 English Radio Controls Programmed Text Message button Menu Steps Press the programmed Text Message button. a. b. to access the menu. or to select. to Messages and press 2 or to Sent Items and press to select. When you select Sent Items and it contains no text messages, the display shows List Empty, and sounds a low tone if Keypad Tones are turned on (see Turning Keypad Tones On or Off on page 106). or 3 4 Choose one of the following. to Delete All and press or to Yes and ppress shows positive mini notice. to select. to select. The display 82 English or screen. to No and press to return to the previous Receiving a Text Message When your radio receives a message, the display shows the alias or ID of the sender and the Message icon at the far left of the screen. You can select Read when receiving a text message. Note: The radio exits the Text Message alert screen and sets up a Private or Group Call to the sender of the messageif the PTT button is pressed when the radio is displaying the alert screen. Reading a Text Message 1 or to Read? and press to select. Selected message in the Inbox opens. A subject line may be shown if the message is from an e-mail application. 2 Do one of the following:

Press to return to the Inbox. Press a second time to reply, forward, or delete the text message. Managing Received Text Messages Use the Inbox to manage your text messages. The Inbox is capable of storing a maximum of 30 messages. Text messages in the Inbox are sorted according to the most recently received. Your radio supports the following options for text messages:

Reply Forward Delete Delete All Note:

If the channel type (i.e. conventional digital or Capacity Plus or Linked Capacity Plus) is not a match, you can only forward, delete, or delete all Received messages. Note:

Long press the Home screen. at any time to return to Viewing a Text Message from the Inbox 1 2 3 4 to access the menu. or or or to Messages and press to select. to Inbox and press to select. toview the messages. A subject line may be shown if the message is from an e-mail application. 5 Do one of the following:

A d v a n c e d F e a t u r e s Press to select the current message, and press again to reply, quick reply, forward, or delete that message. Long press to return to the Home screen. 83 English Viewing a Telemetry Status Text Message from the Inbox 1 2 3 4 to access the menu. or or to Messages and press to select. to Inbox and press to select. to the required message and press or select. You cannot reply to a Telemetry Status text message. The display shows Telemetry: <Status Text Message>. to Radio Controls Programmed Text Message button Menu Steps Press the programmed Text Message button. a. b. to access the menu. or to select. to Messages and press 5 Long press to return to the Home screen. Replying to a Text Message from the Inbox 1 Access the Text Message feature. 2 3 or to Inbox and press to select. to the required message and press or select. A subject line may be shown if the message is from an e-mail application. to 4 Press 5 Do one of the following:

once more to access the sub-menu. or to Reply and press to select. 84 English or A blinking cursor appears. to Quick Reply and press to select. 6 Use your keypad to write/edit your message. 7 Press once message is composed. The display shows transitional mini notice, confirming your message is being sent. If the message is sent successfully, a tone sounds and the display shows positive mini notice, If the message cannot be sent,a low tone sounds and the display shows negative mini notice, If the message cannot be sent, the radio returns you to the Resend option screen (see Managing Fail-to-Send Text Messages on page 77). Deleting a Text Message from the Inbox 1 Access the Text Message feature. Radio Controls Programmed Text Message button Menu Steps Press the programmed Text Message button. a. b. to access the menu. or to select. to Messages and press A d v a n c e d F e a t u r e s 2 3 or to Inbox and press to select. to the required message and press or select. A subject line may be shown if the message is from an e-mail application. to 4 Press once more to access the sub-menu. 5 or to Delete and press to select. 85 English 6 or to Yes and press to select. The display shows positive mini notice and the screen returns to the Inbox. Steps Deleting All Text Messages from the Inbox 1 Access the Text Message feature. Radio Controls Programmed Text Message button Menu Press the programmed Text Message button. a. b. to access the menu. or to select. to Messages and press 2 or to Inbox and press to select. When you select Inbox and it contains no text messages, the display shows List Empty, and sounds a low tone if 86 English Keypad Tones are turned on (see Turning Keypad Tones On or Off on page 106). 3 4 or or to Delete All and press to select. to Yes and press to select. The display shows positive mini notice. Job Tickets Your radio is able to receive Job Tickets, which are messages from the dispatcher listing out tasks that need to be performed. You can respond to Job Tickets in order to sort them into Job Ticket Folders. By default, the folders are All", "New",

"Started", and "Completed". Check with your dealer or system administrator for an additional 10 folders. Your radio supports a maximum of 100 Job Tickets, all of which can be seen in the "All" folder. New Job Tickets and Job Tickets with recent change in state are listed first. Upon reaching the maximum number of Job Tickets, the next Job Ticket automatically replaces the last Job Ticket in your radio. Job Tickets are retained even after radio is powered down and powered up again. Note:

Accessing the Job Ticket Folder Access the Job Ticket folder. A d v a n c e d F e a t u r e s 87 English Radio Control Programmed Job Ticket button Menu 88 English Responding to the Job Ticket Respond to the Job Ticket. Steps a. Press the programmed Job Ticket button. b. or to the required folder and press to select. Note: You can also press and the corresponding number key (19) to access the required folder. a. b. c. to access the menu. or press or to Job Tickets and to select. to the required folder and press to select. Note: You can also press and the corresponding number key (19) to access the required folder. d. or to the required Job to select. Ticket and press Radio Control Programmed Job Ticket button Menu b. a. b. c. Steps a. Press the programmed or Job Ticket button. to the required folder and press to select. Note: You can also press and the cor-

responding number key

(19) to ac-

cess the re-

quired folder. to access the menu or to Job Tickets and press to select or to the required folder and press to select. Note: You can also press and the cor-

responding number key

(19) to ac-

The display shows transitional mini notice, confirming your message being sent. If the message is sent, a tone sounds and the display shows positive mini notice. If the message is not sent, a low tone sounds and the display shows negative mini notice. Deleting a Job Ticket Delete a Job Ticket. A d v a n c e d F e a t u r e s 89 English Radio Control Programmed Job Ticket button Steps a. Press the programmed Job Ticket button. b. a. b. c. d. or to select to All and press to access the menu or press to Job Tickets and to select to All and press or to select or to the required Job to select. Ticket and press Note: At Step 4, while viewing the Job Ticket, press to delete. e. Press Job Ticket. again while viewing the f. to Delete and press or to select Menu 90 English Privacy If enabled, this feature helps to prevent eavesdropping by unauthorized users on a channel by the use of a software-based scrambling solution. The signaling and user identification portions of a transmission are not scrambled. Your radio must have privacy enabled on the channel to send a privacy-enabled transmission, although this is not a necessary requirement for receiving a transmission. While on a privacy-enabled channel, the radio is still able to receive clear

(unscrambled) transmissions. Your radio supports two types of privacy:

Basic Privacy Enhanced Privacy. Only ONE of the privacy types above can be assigned to the radio. To unscramble a privacy-enabled call or data transmission, your radio must be programmed to have the same Privacy Key

(for Basic Privacy), OR the same Key Value and Key ID (for Enhanced Privacy) as the transmitting radio. If your radio receives a scrambled call that is of a different Privacy Key, OR a different Key Value and Key ID, you will either hear a garbled transmission (Basic Privacy) or nothing at all (Enhanced Privacy). If the radio has a privacy type assigned, the Home screen shows the Secure or Unsecure icon, except when the radio is sending or receiving an Emergency call or alarm. The LED lights up solid green while the radio is transmitting and blinks green rapidly when the radio is receiving an ongoing privacy-enabled transmission. You can access this feature by Pressing the programmed Privacy button to toggle privacy on or off. Using the Radio Menu as described by the steps described next. Note: Some radio models may not offer this Privacy feature. Check with your dealer or system administrator for more information. to access the menu. to Utilities and press to select. to Radio Settings and press to select. 1 2 3 4 or or or The disappears from beside Enabled. Covert Mode Your radio is capable of Covert Mode. During covert mode, all keypad and programmed button access are blocked. When enabled, all visual indications (display, LED's and backlight) are enabled. This feature allows audio or tone only via a wired accessory or a Bluetooth accessory. Entering Covert Mode Press the tandem in home screen. button and the 2, 5, and 8 numeric keys in A d v a n c e d F e a t u r e s to Privacy and press to select. Exiting Covert Mode You can also use or to change selected option. To exit Covert Mode, do one of the following:

5 Press to enable/disable Privacy. beside Enabled. The display shows Press the button and the 2, 5, and 8 numeric keys in tandem. Radio will go back to normal mode. Power cycle the radio via the On/Off button. 91 English Dual Tone Multi Frequency (DTMF) Starting an Automatic Site Search Note: The radio only scans for a new site if the current signal is weak or when the radio is unable to detect any signal from the current site. If the RSSI value is strong, the radio remains on the current site. Start Automatic Site search by The Dual Tone Multi Frequency (DTMF) feature allows the radio to operate in a radio system with an interface to telephone systems. 1 Press and hold the PTT button to initiate a DTMF call. 2 Enter the desired number, * or #. You can turn off the DTMF tone by disabling all radio tones and alerts (see Turning the Radio Tones/Alerts On or Off on page 108). Multi-Site Controls These features are applicable when your current radio channel is part of an IP Site Connect or Linked Capacity Plus configuration. See IP Site Connect on page 19 and Linked Capacity Plus on page 20 for more details about these configurations. 92 English Radio Control Site Lock On/Off button Radio menu Description Press the programmed Site Lock On/Off button to toggle the start/stop automatic site search. data transmission. A tone sounds and the display shows Site Unlocked. The radio then returns to the Home screen. The display shows the Site Roaming icon and channel alias. The LED blinks yellow rapidly when the radio is actively searching for a new site, and turns off once the radio locks on to a site. to Utilities and press Stopping an Automatic Site Search When your radio is actively searching for a new site, you can stop the search by a. b. c. d. e. to access the menu. or to select. to Radio Settings and to select. to Site Roaming and press or press or to select. or to select. to Site Lock and press A d v a n c e d F e a t u r e s If the current channel is a multi-site channel with an attached roam list AND is out of range, the radio also performs an automatic site search (that is the site is unlocked) during a PTT button press or 93 English Radio Control Site Lock On/Off button Radio menu Description Press the programmed Site Lock On/Off button to toggle the start/stop automatic site search. a. b. c. d. e. to access the menu. or to select. to Utilities and press to Radio Settings and to select. to Site Roaming and press or press or to select. or to select. to Site Lock and press A tone sounds and the display shows Site Locked. The radio then returns to the Home screen. The LED turns off and the display shows the channel alias. Starting a Manual Site Search Start a Manual Site Search by 94 English Radio Control Manual Site Roam button Radio menu Description Press the programmed Manual Site Roam button to start the manual site search. a. b. c. d. e. to access the menu. or to select. to Utilities and press to Radio Settings and to select. to Site Roaming and press to Active Search and press or press or to select. or to select. A tone sounds, the display shows Finding Site, and the LED blinks green. If a new site is found, a tone sounds and the LED turns off. The display shows Site <Alias> Found. If there is no available site within range, a tone sounds and the LED turns off. The display shows Out of Range. If a new site is within range, but the radio is unable to connect to it, a tone sounds and the LED turns off. The display shows Channel Busy. The radio lastly returns to the Home screen. Security You can enable or disable any radio in the system. For example, you might want to disable a stolen radio, to prevent the thief from using it, and enable that radio, when it is recovered. Note: Performing Radio Disable and Enable is limited to radios with these functions enabled. Check with your dealer or system administrator for more information. Radio Disable 1 Access this feature by A d v a n c e d F e a t u r e s 95 English If successful, the radio sounds a positive indicator tone and the display shows positive mini notice. If not successful, the radio sounds a negative indicator tone and the display shows negative mini notice. Do not press you will not get an acknowledgement message. during the Radio Disable operation as Radio Enable 1 Access this feature by Radio Controls Radio Disable button Radio menu 96 English Steps a. Press the programmed Radio Disable button. or b. a. b. to the required alias or ID and press to select. to access the menu. or to Contacts and press to select. The entries are alphabetically sorted. c. Use one of the steps described next to select the required subscriber alias or ID select the required alias or ID directly or to the required alias or ID and press to select. use the Manual Dial menu or press or press to Manual Dial and to select. to Radio Number and to select. The first line of the display shows Radio Number: . line of the display shows a blinking cursor. Use the keypad to enter the the second If successful, the radio sounds a positive indicator tone and the display shows positive mini notice. If not successful,the radio sounds a negative indicator tone and the display shows negative mini notice. a. Press the programmed Radio Enable to the required alias or ID Do not press you will not get an acknowledgement message. during the Radio Enable operation as and press to select. to access the menu. Lone Worker Radio Controls Radio Enable button Radio menu Steps button. or b. a. b. A d v a n c e d F e a t u r e s or to Contacts and press to select. The entries are alphabetically sorted. c. Use one of the steps described next to select the required subscriber alias or ID select the required alias or ID directly or to the required alias or ID and press to select. use the Manual Dial menu or press or press to Manual Dial and to select. to Radio Number and to select. The first line of the display shows Radio Number: . line of the display shows a blinking cursor. Use the keypad to enter the the second This feature raises an emergency if there is no user activity, such as any radio button press or activation of the channel selector, for a predefined time. Before raising the emergency, when the inactivity timer expires, the radio warns the user via an audio indicator. If there is still no acknowledgment by the user before the predefined reminder timer expires, the radio initiates an Emergency Alarm. Only one of the following Emergency Alarms can be assigned to this feature:

Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow The radio remains in the emergency state allowing voice messages to proceed until action is taken. See Emergency Operation on page 67 on ways to exit Emergency. Note: This feature is limited to radios with this function enabled. Check with your dealer or system administrator for more information. 97 English You hear a continuous tone. 2 Do one of the following:

Enter your current four-digit password with the radios

. keypad. The second line of the display shows Press to proceed. Enter your current four-digit password. Press edit each digits numeric value. Each digit changes to or to

. Press to move to next digit. Press your selection. to confirm to remove the last You hear a positive indicator tone for every digit entered. Press on the display. You hear a negative indicator tone, if you press when the second line of the display is empty, or if you press more than four digits. If the password is correct, your radio proceeds to power up. See Powering Up the Radio on page 11. If the password is incorrect, the display shows Wrong Password. Repeat Steps 1 and 2 . Password less than four digits is incorrect. After the third incorrect password, the display shows Wrong Password and then, shows Radio Locked. A tone sounds and the LED double blinks yellow. 98 English Your radio enters into locked state for 15 minutes, and responds to inputs from On/Off Button and programmed Backlight button only. Note: The radio is unable to receive any call, including emergency calls, in locked state. Unlocking the Radio from Locked State 1 If your radio was powered down after being in the locked state, power up the radio. A tone sounds and the LED double blinks yellow. The display shows Radio Locked. 2 Wait for 15 minutes. Your radio restarts the 15 minutes timer for locked state when you power up. 3 Repeat Steps and 2 in Accessing the Radio from Password on page 97. Turning the Password Lock On or Off Changing the Password 1 2 3 to access the menu. or or to Utilities and press to select. to Radio Settings and press to select. 1 2 3 to access the menu. or or to Utilities and press to select. to Radio Settings and press to select. or 4 5 Enter the four-digit password. to Passwd Lock and press to select. or 4 5 Enter the four-digit password. to Passwd Lock and press to select. See Step 2 in Accessing the Radio from Password on page 97. See Step 2 in Accessing the Radio from Password on page 97. 6 Press to proceed. 6 Press to proceed. If the password is incorrect, the display shows Wrong Password, and automatically returns to the previous menu. If the password is incorrect, the display shows Wrong Password, and automatically returns to the previous menu. A d v a n c e d F e a t u r e s 7 If the password entered in the previous step is correct, to enable/disable password lock. beside Enabled. press The display shows The disappears from beside Enabled. 7 If the password entered in the previous step is correct, or to Change Pwd and press 8 Enter a new four-digit password. to select. See Step 2 in Accessing the Radio from Password on page 97. 99 English 9 Reenter the previously entered four-digit password. See Step 2 in Accessing the Radio from Password on page 97 10 Press to proceed. If the reentered password matches the new password entered earlier, the display shows Password Changed. If the reentered password does NOT match the new password entered earlier, the display shows Passwords Do Not Match. The screen automatically returns to the previous menu. At the fringe areas of reception, both voice and tone quality will start to sound garbled or broken. To correct this problem, simply position your radio and Bluetooth-enabled device closer to each other (within the 10-meter/32 feet defined range) to reestablish clear audio reception. Your radios Bluetooth function has a maximum power of 2.5 mW (4 dBm) at the 10-meter/ 32 feet range. Your radio can support up to 3 simultaneous Bluetooth connections with Bluetooth-enabled devices of unique types.For example, a headset, a scanner, and a PTT-Only Device (POD). Multiple connections with Bluetooth-enabled devices of the same type are not supported. Refer to your respective Bluetooth-enabled devices user manual for more details on your Bluetooth-enabled devices full capabilities. Bluetooth Operation Turning Bluetooth On and Off This feature allows you to use your radio with a Bluetooth enabled device (accessory) via a wireless Bluetooth connection. Your radio supports both Motorola and COTS (Commercially available Off-The-Shelf) Bluetooth-enabled devices. Bluetooth operates within a range of 10 meters (32 feet) line of sight.This is an unobstructed path between your radio and your Bluetooth-enabled device. It is not recommended that you leave your radio behind and expect your Bluetooth-enabled device to work with a high degree of reliability when they are separated. 100 English 1 2 3 to access the menu. or or to Bluetooth and press to select. to My Status and press to select. The display shows On and Off. The current status is indicated by a

. 4 Do one of the following:

or or shows On and a to On and press to select. The display appears left of the selected status. shows Off and a to Off and press to select. The display appears left of the selected status. Finding and Connecting to a Bluetooth Device Do not turn off your Bluetooth-enabled device or press during the finding and connecting operation as this cancels the operation. 1 Turn on your Bluetooth-enabled device and place it in pairing mode. Refer to respective Bluetooth-enabled devices user manual. 2 On your radio, press to access the menu. 3 or to Bluetooth and press to select. or devices. to select. to Find Devices to locate available or to the required device and press 6 or to Connect and press to select. Display shows Connecting to <Device>. Your Bluetooth-enabled device may require additional steps to complete the pairing. Refer to respective Bluetooth-enabled devices user manual. If successful, the radio display shows <Device> Connected. A tone sounds and appears besides the connected device. The Bluetooth Connected icon appears on the status bar. If unsuccessful, the radio display shows Connecting Failed. If pin code is required, use the same entry method as Step 2 in Accessing the Radio from Password on page 97. Note:

A d v a n c e d F e a t u r e s to select. Finding and Connecting from a Bluetooth Device

(Discoverable Mode) or 4 5 Do one of the following:

to Devices and press or to the required device and press to select. Do not turn off your Bluetooth or your radio during the finding and connecting operation as this may cancel the operation. 1 Turn Bluetooth On. 101 English See Turning Bluetooth On and Off on page 100. 2 3 4 to access the menu. or or to Bluetooth and press to select. to Find Me and press to select. Your radio can now be found by other Bluetooth-enabled devices for a programmed duration. This is called Discoverable Mode. 5 Turn on your Bluetooth-enabled device and pair it with your radio. Refer to respective Bluetooth-enabled devices user manual. Disconnecting from a Bluetooth Device 1 On your radio, press to access the menu. 4 5 or or to the required device and press to select. to Disconnect and press to select. Display shows Disconnecting from <Device>. Your Bluetooth-enabled device may require additional steps to disconnect. Refer to respective Bluetooth-enabled devices user manual. The radio display shows <Device> Disconnected. A positive indicator tone sounds and disappears beside the connected device. The Bluetooth Connected icon disappears on the status bar. Switching Audio Route You can toggle audio routing between internal radio speaker and external Bluetooth-enabled accessory. Press the programmed Bluetooth Audio Switch button. A tone sounds and display shows Route Audio to Radio. A tone sounds and display shows Route Audio to Bluetooth. to Bluetooth and press to select. to Devices and press to select. Viewing Device Details 1 to access the menu. or or 2 3 102 English to Bluetooth and press to select. 6 Press to move one space to the left. Press to move 2 3 4 5 or or or or to Devices and press to select. to the required device and press to select. to View Details and press to select. Editing Device Name You can edit the name of available Bluetooth-enabled devices. 1 2 3 4 5 to access the menu. or or or or to Bluetooth and press to select. to Devices and press to select. to the required device and press to select. to Edit Name and press to select. A d v a n c e d F e a t u r e s one space to the right. Press characters. Long press A blinking cursor appears. Use the keypad to type the required zone. to delete any unwanted to change text entry method. 7 The display shows Device Name Saved. Deleting Device Name You can remove a disconnected device from the list of Bluetooth-enabled devices. 1 2 3 4 5 to access the menu. or or or or to Bluetooth and press to select. to Devices and press to select. to the required device and press to select. to Delete and press to select. The display shows Device Deleted. 103 English messages and missed calls. Unread Job Tickets are also stored in the notification list. The Notification icon appears on the status bar when the Notification List has one or more events. For TMS and missed call/call alert notification events, the maximum number are 30 TMS and 10 missed calls/call alerts. This maximum number depends on individual feature (job tickets or TMS or missed calls/call alerts) list capability. Note: After the events are read, they are removed from the Notification List. Accessing the Notification List 1 2 3 to access the menu. or or to Notification and press to select. to the required event and press to select. Long press to return to the Home Screen. Bluetooth Mic Gain Allows control of the connected Bluetooth-enabled devices microphone gain value. 1 2 3 4 5 to access the menu. or or or to Bluetooth and press to select. to BT Mic Gain and press to select. to the BT Mic Gain type and the current values. To edit values, press to select. to increase or to decrease values and press or to select. Notification List Your radio has a Notification List that collects all your unread events on the channel, such as unread text messagestelemetry 104 English Over-the-Air-Programming (OTAP) Utilities Your radio can be updated by your dealer remotely, via OTAP, without needing to be physically connected. Additionally, some settings can also be configured via OTAP. While undergoing OTAP, the LED blinks green. Note: When the radio is receiving high volume data, the High Volume Data icon appears and channel is busy. A PTT button press at this time may cause a negative tone to sound. Once the programming is complete, depending on your radios configuration:

A tone sounds, the display shows Updating Restarting, and your radio restarts (powers off and on again). Select between Restart Now or Postpone. Selecting Postpone allows your radio to return to the previous display, with an OTAP Timer icon visible, for a period of time before the automatic restart occurs. Upon power up after the automatic restart occurs, the display shows Sw Update Completed if the OTAP update is successful or Sw Update Failed if the OTAP update is unsuccessful. See Software Update on page 124 for your updated software version. A d v a n c e d F e a t u r e s Locking and Unlocking the Keypad You can lock your radios keypad to avoid inadvertent key entry. To lock/unlock your radios keypad. Option Locking the Keypad Steps a. to access the menu. b. c. d. or to select. to Utilities and press to Radio Settings and to select. to Keypad Lock and press or press or to select. You can also use selected option. or to change the Unlocking the Keypad Press followed by

. After the keypad is locked, the display shows Keypad Locked and returns to the Home screen. 105 English After the keypad is unlocked, the display shows Keypad Unlocked and returns to the Home screen. Turning Keypad Tones On or Off You can enable and disable keypad tones if needed. Turning the Option Board Feature(s) On or Off A channel can support up to 6 option board features. Refer to your dealer or system administrator for more information. Press the programmed Option Board Feature button to toggle the feature on or off. to access the menu. Identifying Cable Type 1 2 3 4 5 or or or or to Utilities and press to select. to Radio Settings and press to select. to Tones/Alerts and press to select. to Keypad Tones and press to select. You can also use or to change the selected option. 6 Press to enable/disable keypad tones. The display shows The disappears from beside Enabled. beside Enabled. 106 English You can select the type of cable your radio uses. 1 2 3 4 to access the menu. or or or to Utilities and press to select. to Radio Settings and press to select. to Cable Type and press to select. At Step 4, you can also use option. or to change the selected 5 The current cable type is indicated by a Turning the Voice Operating Transmission (VOX) Feature On or Off This feature allows you to initiate a hands-free voice activated call on a programmed channel. The radio automatically transmits, for a programmed period, whenever the microphone on the VOX-capable accessory detects voice. Pressing the PTT button during radio operation will disable VOX. To re-enable VOX, do one of the following:

Turn the radio off and power it on again Press the programmed VOX button to toggle the feature on or off or follow the steps described next to access this feature via the radio menu. Note: Turning this feature on or off is limited to radios with this function enabled. Check with your dealer or system administrator for more information. 1 2 3 4 to access the menu. or or or to Utilities and press to select. to Radio Settings and press to select. to VOX and press to select. A d v a n c e d F e a t u r e s 5 Press to disable/enable VOX. The display shows The disappears from beside Enabled. beside Enabled. Controlling the Display Backlight You can enable or disable the radios display backlight as needed. The setting also affects the Menu Navigation Buttons and keypad backlighting accordingly. Press the programmed Backlight button to toggle the backlight settings, or follow the procedure described next to access this feature via the radio menu. The display backlight and keypad backlighting are automatically turned off if the LED indicator is disabled (see Turning the LED Indicator On or Off on page 114). 1 2 3 4 to access the menu. or or or to Utilities and press to select. to Radio Settings and press to select. to Backlight and press to select. 107 English You can also use or to change the selected option. 5 or to All Tones and press to select. 5 Press to enable/disable the display backlight. The display shows The disappears from beside Enabled. beside Enabled. 6 Press to enable/disable all tones and alerts. The display shows The disappears from beside Enabled. beside Enabled. Turning the Radio Tones/Alerts On or Off You can enable and disable all radio tones and alerts (except for the incoming Emergency alert tone) if needed. Press the programmed All Tones/Alerts button to toggle all tones on or off, or follow the procedure described next to access this feature via the radio menu. to access the menu. or or or to Utilities and press to select. to Radio Settings and press to select. to Tones/Alerts and press to select. 1 2 3 4 108 English Setting the Tone Alert Volume Offset Level You can adjust the Tone Alert Volume Offset level if needed. This feature adjusts the volume of the tones/alerts, allowing it to be higher or lower than the voice volume. 1 2 3 4 5 6 to access the menu. or or or or or to Utilities and press to select. to Radio Settings and press to select. to Tones/Alerts and press to select. to Vol. Offset and press to select. to the required volume value. The radio sounds a feedback tone with each corresponding volume value. You can also use or to change the selected option. 7 Do one of the following:

6 Press to enable/disable the Talk Permit Tone. Press to keep the required displayed volume value. Press to exit without changing the current volume offset settings. The display shows The disappears from beside Enabled. beside Enabled. Repeat Step 6 to select another volume value. Turning the Talk Permit Tone On or Off You can enable and disable the Talk Permit Tone if needed. 1 2 3 4 5 to access the menu. or or or or to Utilities and press to select. to Radio Settings and press to select. to Tones/Alerts and press to select. to Talk Permit and press to select. Setting the Text Message Alert Tone You can customize your radios text message alert tone to Momentary or Repetitive for each entry in the Contacts list. 1 2 3 4 to access the menu. or to Contacts and press to select. to the required subscriber alias or ID and press or to select. or to Message Alert and press to select. The display shows Momentary and Repetitive. You can also use or to change the selected option. 109 English A d v a n c e d F e a t u r e s 5 or to the required setting and press to enable appears besides selected setting. Changing the Display Mode You can change radios display mode between Day or Night, as needed. This affects the color palette of the display. Change the Display Mode Steps Press the programmed Display Mode button. Radio Control Programmed Display Mode Button Menu a. b. c. d. to Utilities and press to access the menu. or to select. or press to Radio Settings and to select. or to Display and press to select. The display shows Day Mode and Night Mode. Note:

You can also use to change the selected option. or e. or to the required setting and press to enable. besides selected setting. appears 110 English Adjusting the Display Brightness You can adjust radios display brightness as needed. Note: Display brightness cannot be adjusted when Auto Brightness is enabled. Adjust the Display Brightness A d v a n c e d F e a t u r e s 111 English Radio Control Programmed Display Brightness Button Menu 112 English Steps Wallpaper Mode a. Press the programmed Brightness button. b. Decrease display brightness by or increase the display pressing brightness by pressing setting of 1 to 8. Press your entry. Select from to confirm a. b. c. d. to Utilities and press to access the menu. or to select. or press or to select. to Radio Settings and to select. to Brightness and press The display shows a progress bar. e. Decrease display brightness by or increase the display pressing brightness by pressing setting of 1 to 8. Press your entry. Select from to confirm Your radio displays the Wallpaper background on home screen. The user can select from 5 default wallpapers. 1 2 3 4 5 to access the menu. or or or or to Utilities and press to select. to Radio Settings and press to select. to Display and press to select. to Wallpaper and press to select. You can also use or to change the selected option. Screen Saver Mode The screen saver feature allows the radio to save radio battery time. A Screen Saver Pre Duration is used to track the radio activities before entering screen saver mode. Radio starts Screen Saver Pre Duration upon power up. Radio enters into screen saver mode when Screen Saver Pre Duration timer expires, the radio exits screen saver mode and responds to related transaction normally upon any user input and over the air transaction. Radio restarts Screen Saver Pre Duration upon any user input and over the air transaction. After being in Screen Saver mode for 5 seconds, radio enters keypad lock state automatically. When any audio or Bluetooth accessory is connected, battery saver mode is enabled, radio enters screen saver mode. If there is any user input or over the air transaction, the radio exits screen saver mode and responds to user interaction. The Screen Saver Pre Duration is restarted and the radio goes back to screen saver mode when it expires. Note: The screen saver mode is to help improve battery life. Audio Accessory The audio accessory has two modes: Normal and Battery Saver mode. When audio accessory is plugged in and the setting is in Battery Saver Mode, the radio restarts the timer and goes into screen saver mode. In this scenario, when there is any user input (including user input on radio and accessory attachment/detachment) or when receiving emergency alarm/call, the radio exits screen saver mode and responds to user event as normal. The Screen Saver timer restarts and the radio goes back to screen saver mode when the time allocated expires. Note: This battery saver mode is to improve battery life. See Screen Saver box SRS for more details in this mode. Auto Keypad Lock You can enable/disable your radios auto keypad lock to avoid inadvertent key entry. 1 2 3 to access the menu. or or to Utilities and press to select. to Radio Settings and press to select. or 4 5 Do one of the following:

to Auto Keypad Lock and press to select. Press shows to enable Auto Keypad Lock. The display beside Enabled. A d v a n c e d F e a t u r e s Press to disable Auto Keypad Lock. The disappears from beside Enabled. Language You can set your radio display to be in your required language. 1 to access the menu. 113 English Voice Announcement This feature enables the radio to audibly indicate the current Zone or Channel the user has just assigned, or programmable button press. This audio indicator can be customized per customer requirements. This is typically useful when the user is in a difficult condition to read the content shown on the display. Toggle Voice Announcement On or Off. 2 3 4 5 or or or to Utilities and press to select. to Radio Settings and press to select. to Languages and press to select. or enable. to the required language and press appears beside selected language. to Turning the LED Indicator On or Off You can enable and disable the LED Indicator if needed. 1 2 3 4 to access the menu. or or or to Utilities and press to select. to Radio Settings and press to select. to LED Indicator and press to select. 5 Press to enable/disable the LED Indicator. The display shows The disappears from beside Enabled. beside Enabled. 114 English Steps Press the programmed Voice Announcement button. Radio Control Programmed Voice Announcement Button Menu a. b. c. d. to Utilities and press to access the menu. or to select. or press or to Radio Settings and to select. to Voice Announcement and press to select. Note:

You can also use to change the selected option. or e. Do one of the following:

Press to enable Voice Announcement. The display shows beside Enabled. Press to disable Voice Announcement. The from beside Enabled. disappears Digital Mic AGC (Mic AGC-D) This feature controls the your radio's microphone gain automatically while transmitting on a digital system. It suppresses loud audio or boosts soft audio to a preset value in order to provide a consistent level of audio. 1 2 3 to access the menu. or or to Utilities and press to select. to Radio Settings and press to select. You can also use or to change the selected option. A d v a n c e d F e a t u r e s or 4 5 Do one of the following:

to Mic AGC-D and press to select. Press to enable Mic AGC-D. The display shows beside Enabled. Press to disableMic AGC-D. The disappears from beside Enabled. Intelligent Audio Your radio can automatically adjust its audio volume to overcome background noise in the environment, inclusive of all115 English stationary and non-stationary noise sources. This feature is a Receive-only feature and does not affect Transmit audio. Note: This feature is not applicable during a bluetooth session. Toggle Intelligent Audio On or Off. 116 English See Accessories, page 126 for recommended Bluetooth-enabled audio accessories with in-built Automatic Volume Control for similar performance. Turning the Acoustic Feedback Suppressor Feature On or Off This feature allows you to minimize acoustic feedback in received calls. Toggle Acoustic Feedback Suppressor Features On or Off A d v a n c e d F e a t u r e s Radio Control Programmed Intelligent Audio Button Menu Steps Press the programmed Intelligent Audio button. a. b. c. d. to access the menu. or press or press or to Radio Settings and to select. to Radio Settings and to select. to Intelligent Audio and press to select. Note:

You can also use to change the selected option. or e. Do one of the following:

Press to enable Intelligent Audio. The display shows Enabled. beside Press Audio. The beside Enabled. to disable Intelligent disappears from 117 English Steps Press the programmed Acoustic Feedback Suppressor button. Radio Control Programmed Acoustic Feedback Suppressor Button Menu a. b. c. d. to Utilities and press to access the menu. or to select. or press or press to Radio Settings and to select. to AF Suppressor and to select. Note:

You can also use to change the selected option. or e. Do one of the following:

118 English Press to enable Acoustic Feedback Suppressor. The display shows beside Enabled. Press to disable Acoustic Feedback Suppressor. The disappears from beside Enabled. Text Entry Configuration You can configure the following settings for entering text on your radio:

Word Predict Word Correct Sentence Cap My Words Note:

at any time to return to the to Press previous screen or long press return to the Home Screen. The radio exits the current screen once the inactivity timer expires. Word Predict Your radio can learn common word sequences that you often enter. It then predicts the next word you may want to use after you enter the first word of a common word sequence into the text editor. 1 to access the menu. 2 3 4 5 or or or or to Utilities and press to select. to Radio Settings and press to select. to Text Entry and press to select. to Word Predict and press to select. A d v a n c e d F e a t u r e s You can also use or to change the selected option. You can also use or to change the selected option. 6 Do one of the following:

6 Do one of the following:

Press to enable Word Predict. The display shows beside Enabled. Press to enable Word Correct. The display shows beside Enabled. Press to disable Word Predict. The disappears from beside Enabled. Press to disable Word Correct. The disappears from beside Enabled. Word Correct Supplies alternative word choices when the word entered into the text editor is not recognized by the in-built dictionary. 1 2 3 4 5 to access the menu. or or or or to Utilities and press to select. to Radio Settings and press to select. to Text Entry and press to select. to Word Correct and press to select. Sentence Cap Automatically enables capitalization for the first letter in the first word for every new sentence. 1 2 3 4 5 to access the menu. or or or or to Utilities and press to select. to Radio Settings and press to select. to Text Entry and press to select. to Sentence Cap and press to select. 119 English 6 Do one of the following:

Press to enable Sentence Cap. The display shows beside Enabled. Press to disable Sentence Cap. The disappears from beside Enabled. Viewing Custom Words You can add your own custom words into your radios in-built dictionary. Your radio maintains a list to contain these words. 1 2 3 4 5 6 to access the menu. or or or or or to Utilities and press to select. to Radio Settings and press to select. to Text Entry and press to select. to My Words and press to select. to List of Words and press to select. Display shows the list of custom words. 120 English Editing Custom Word You can edit the custom words saved in your radio. 1 2 3 4 5 6 7 to access the menu. or or or or or to Utilities and press to select. to Radio Settings and press to select. to Text Entry and press to select. to My Words and press to select. to List of Words and press to select. Display shows the list of custom words. or to the required word and press to select. or 8 9 Use the keypad to edit your custom word. to Edit and press to select. Press to move one space to the left. Press or the key to move one space to the right. Press the key to delete any unwanted characters. Long press to change text entry method. Press word is completed. once your custom 4 5 6 or or to Text Entry and press to select. to My Words and press to select. or to Add New Word and press Display shows the list of custom words. to select. The display shows transitional mini notice, confirming your custom word is being saved. If the custom word is saved, a tone sounds and the display shows positive mini notice. If the custom word is not saved, a low tone sounds and the display shows negative mini notice. Adding Custom Word You can add your own custom words into your radios in-built dictionary. 1 2 3 to access the menu. or or to Utilities and press to select. to Radio Settings and press to select. 7 Use the keypad to edit your custom word. Press to move one space to the left. Press or the key to move one space to the right. Press the key to delete any unwanted characters. Long press to change text entry method. Press word is completed. once your custom The display shows transitional mini notice, confirming your custom word is being saved. If the custom word is saved, a tone sounds and the display shows positive mini notice. If the custom word is not saved, a low tone sounds and the display shows negative mini notice. A d v a n c e d F e a t u r e s 121 English Deleting a Custom Word Deleting All Custom Words You can delete the custom words saved in your radio. You can delete all custom words from your radios in-built. 1 2 3 4 5 6 to access the menu. or or or or or to Utilities and press to select. to Radio Settings and press to select. to Text Entry and press to select. to My Words and press to select. to the required word and press to select. or 7 8 Choose one of the following. to Delete and press to select. At Delete Entry?, press shows Entry Deleted. to select Yes. The display or screen. to No and press to return to the previous 122 English 1 2 3 4 5 to access the menu. or or or or to Utilities and press to select. to Radio Settings and press to select. to Text Entry and press to select. to My Words and press to select. or 6 7 Choose one of the following. to Delete All and press to select. At Delete Entry?, press shows Entry Deleted. to select Yes. The display or screen. to No and press to return to the previous Accessing General Radio Information Your radio contains information on the following:

Battery Radio Alias and ID Firmware and Codeplug Versions Open-Source Software Information Software Update Site Information at any time to return to the previous screen or Press long press the current screen once the inactivity timer expires. to return to the Home screen. The radio exits Accessing the Battery Information Displays information on your radio battery. 1 2 3 4 to access the menu. or or or to Utilities and press to select. to Radio Info and press to select. to Battery Info and press to select. A d v a n c e d F e a t u r e s The display shows the battery information. For IMPRES batteries ONLY: The display reads Recondition Battery if the battery requires reconditioning in an IMPRES charger. After the reconditioning process, the display then shows the battery information. Checking the Radio Alias and ID This feature displays the ID of your radio. Press the programmed Radio Alias and ID button to check your radio alias and ID. You hear a positive indicator tone. Follow the procedure described next to access this feature via the radio screen. 1 2 3 4 to access the menu. or or or to Utilities and press to select. to Radio Info and press to select. to My ID and press to select. The first line of the display shows the radio alias. The second line of the display shows the radio ID. 123 English Checking the Firmware Version and Codeplug Version Displays the firmware version on your radio. 4 or to Versions and press to select. The display shows the Firmware Version information. to Utilities and press to select. Software Update to access the menu. 1 2 3 4 or or or to Radio Info and press to select. to Versions and press to select. The display shows the current firmware and codeplug versions. Checking the Open-Source Software Information Displays the open-source software (OSS) information on your radio. to access the menu. or or to Utilities and press to select. to Radio Info and press to select. 1 2 3 124 English Displays the date and time of the latest software update carried out via Over-the-Air Programming. Note: Software Update menu is only available after at least one successful OTAP session. 1 2 3 4 to access the menu. or or or to Utilities and press to select. to Radio Info and press to select. to SW Update and press to select. The display shows the date and time of the latest software update. See Over-the-Air-Programming (OTAP) on page 105 for details on OTAP session. Site Information Displays the current Linked Capacity Plus site name your radio is on. The display shows current RSSI values. Long press the to return to the Home Screen. See Display Icons on page 21 for details on RSSI icon. 1 2 3 4 to access the menu. or or or to Utilities and press to select. to Radio Info and press to select. to Site Info and press to select. The display shows the current Linked Capacity Plus site name. See Linked Capacity Plus on page 20 for details on Linked Capacity Plus. RSSI Values Your radio shows the Received Signal Strength Indicator (RSSI) icon at the top of your display. This feature allows you to view the RSSI values. On the home screen, press press

, all within 5 seconds. three times and immediately 125 English A d v a n c e d F e a t u r e s

.............................. Accessories The following topics are covered:

Antennas ............................................................... 126 Audio Accessories ................................................... 126 Batteries ................................................................ 126 Bluetooth ............................................................... 126 Cables................................................................... 127 Carry Devices ......................................................... 127 Chargers................................................................ 127 Miscellaneous Accessories ........................................ 127 Antennas 420 445 MHz Stubby Antenna, (PMAE4076_) 438 470 MHz Stubby Antenna, (PMAE4077_) 403 425 MHz Stubby Antenna, (PMAE4078_) 896 941 MHz Stubby Antenna (85012072001) 1 Not applicable to the 800/900 band. 126 English Audio Accessories Surveillance Earpiece with in-line microphone and PTT

(PMLN5957_) Swivel Earpiece with in-line microphone and PTT

(PMLN5958_) Batteries Lithium-Ion 1800 mAH Battery Pack (HKNN4013_) Lithium-Ion 1370 mAH Battery Pack (PMNN4425_) 1 Bluetooth HK200 Bluetooth Headset (US) (89409_) Operations Critical Wireless Earpiece with 12 inch cable (US)

(NNTN8125_) Operations Critical Wireless Earpiece with 9.5 inch cable

(US) (NNTN8126_) Operations Critical Wireless Push-To-Talk POD (US)

(NNTN8127_) Cables Micro USB Programming Cable (25-124330-01R) Carry Devices Carry Holder (PMLN5956_) Wrist Strap (PMLN6074_) Chargers Multi-Unit Charger, US Plug (PMLN5916_) Micro USB Charger, US Plug (PMPN4009_) Micro USB Single-Unit Plug-In Charger (SPN5547_) Miscellaneous Accessories 1370 mAH Battery Cover (PMLN6000_) 1800 mAH Battery Cover (PMLN6001_) A c c e s s o r i e s 127 English Batteries and Chargers Warranty The Workmanship Warranty The workmanship warranty guarantees against defects in workmanship under normal use and service. All MOTOTRBO Batteries IMPRES Chargers

(Single-Unit and Multi-Unit, Non-Display) IMPRES Chargers (Multi-Unit with Display) Two (2) Years Two (2) Years One (1) Year The Capacity Warranty The capacity warranty guarantees 80% of the rated capacity for the warranty duration. Nickel Metal-Hydride (NiMH) or Lithium-Ion (Li-lon) Batteries IMPRES Batteries, When Used Exclusively with IMPRES Chargers 12 Months 18 Months 128 English Limited Warranty MOTOROLA COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:

MOTOROLA SOLUTIONS, INC. (MOTOROLA) warrants the MOTOROLA manufactured Communication Products listed below (Product) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:

SL Series Digital Portable Radios Product Accessories

(Excluding Batteries and Chargers) Two (2) Years One (1) Year MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. II. GENERAL PROVISIONS:

This warranty sets forth the full extent of MOTOROLA'S responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at MOTOROLAs option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. STATE LAW RIGHTS:

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE:

You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at 1-800-927-2744 US/Canada. 129 English V. WHAT THIS WARRANTY DOES NOT COVER:

1. Defects or damage resulting from use of the Product in other than its normal and customary manner. 2. Defects or damage from misuse, accident, water, or neglect. 3. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. 4. Breakage or damage to antennas unless caused directly by defects in material workmanship. 5. A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA's normal warranty inspection and testing of the Product to verify any warranty claim. 6. Product which has had the serial number removed or made illegible. 7. Rechargeable batteries if:

a. any of the seals on the battery enclosure of cells are broken or show evidence of tampering. the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. b. 8. Freight costs to the repair depot. 130 English 9. A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with MOTOROLAs published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA. 10. Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. 11. Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS:

MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:

1. that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim, that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise, and 2. 3. should the Product or parts become, or in MOTOROLAs opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using VII. GOVERNING LAW:

This Warranty is governed by the laws of the State of Illinois, U.S.A. the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA. MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise of rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights. 131 English 68009554001_D_Backcover.fm Page 1 Wednesday, May 22, 2013 11:09 AM 68009554001_D_Backcover.fm Page 2 Wednesday, May 22, 2013 11:09 AM Motorola Solutions, Inc. 1303 East Algonquin Road Schaumburg, Illinois 60196 U.S.A. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2011 2013 Motorola Solutions, Inc. All rights reserved. May 2013. www.motorolasolutions.com/slseries

*68009554001*

68009554001-G

6881095C98-J_SafetyP.book Page 1 Tuesday, May 21, 2013 2:35 PM RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS ATTENTION!

Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. 2007 2013 Motorola Solutions, Inc. All rights reserved. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, U.S.A.

*NNTN7223F*

NNTN7223F 6881095C98-J English 6881095C98-J_SafetyP.book Page 2 Tuesday, May 21, 2013 2:35 PM RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use NOTICE: This radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. English 2 6881095C98-J_SafetyP.book Page 3 Tuesday, May 21, 2013 2:35 PM Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/

www.motorolasolutions.com/rfhealth Federal Communication Commission (FCC) Regulations When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Motorola two-way radio has a RF Exposure Product Label. Also, your Motorola user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standards Your Motorola two-way radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk-50%

listen and is approved for occupational use only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. 3 English 6881095C98-J_SafetyP.book Page 4 Tuesday, May 21, 2013 2:35 PM NOTE: The approved batteries, supplied with this radio, are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby) even though this radio complies with FCC occupational exposure limits and may operate at duty factors of up to 50% talk. Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines:

United States Federal Communications Commission (FCC), Code of Federal Regulations; 47 CFR et seq. & FCC, OET Bulletin 65 Institute of Electrical and Electronic Engineers (IEEE) C95.1 International Commission on Non-Ionizing Radiation Protection (ICNIRP) Ministry of Health (Canada) Safety Code 6 & Industry Canada RSS-102 Australian Communications Authority Radiocommunications Standard et seq. ANATEL ANNEX to Resolution No. 303 et seq. RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures. DO NOT remove the RF Exposure Label from the device. User awareness instructions should accompany device when transferred to other users. English 4 6881095C98-J_SafetyP.book Page 5 Tuesday, May 21, 2013 2:35 PM Two-Way Radio Operation Transmit no more than the rated duty factor of 50% of the time. To transmit

(talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. The PTT button may reside on the radio itself or may be hosted on approved wired or wireless (for example, a Bluetooth enabled remote Push-to-Talk button) accessories. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). In front of the face. Hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips. Keeping the radio at a proper distance is important to ensure compliance. NOTE: RF exposures decrease with increasing distance from the antenna. Body Worn Operation. When worn on the body, always place the radio in a Motorola-approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of non-

Motorola-approved accessories may result in exposure levels, which exceed the occupational/controlled environment RF exposure limits. Use only Motorola-approved supplied or replacement antennas, batteries, and audio accessories. Use of non-Motorola-approved antennas, batteries, and wired or wireless accessories may exceed the applicable RF exposure guidelines (iEEE, ICNIRP or FCC). For a list of Motorola-approved accessories for your radio model, visit the following website: http://www.motorolasolutions.com/governmentandenterprise 5 English 6881095C98-J_SafetyP.book Page 6 Tuesday, May 21, 2013 2:35 PM Electromagnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers The Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with those of the U.S. Food and Drug Administration. Persons with pacemakers should:

ALWAYS keep the radio more than 6 inches (15 centimeters) from their pacemaker when the radio is turned ON. Not carry the radio in the breast pocket. Use the ear opposite the pacemaker to minimize the potential for interference. Turn the radio OFF immediately if there is any reason to suspect that interference is taking place. English 6 6881095C98-J_SafetyP.book Page 7 Tuesday, May 21, 2013 2:35 PM Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use of Communication Devices While Driving Always check the laws and regulations on the use of radios in the areas where you drive. Give full attention to driving and to the road. Use hands-free operation, if available. Pull off the road and park before making or answering a call, if driving conditions or regulations so require. 7 English 6881095C98-J_SafetyP.book Page 8 Tuesday, May 21, 2013 2:35 PM Acoustic Safety Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. To protect your hearing:

Use the lowest volume necessary to do your job. Turn up the volume only if you are in noisy surroundings. Turn down the volume before adding headset or earpiece. Limit the amount of time you use headsets or earpieces at high volume. When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear. Operational Warnings W A R N I N G For Vehicle With Air Bags:

Refer to vehicle manufacturer's manual prior to installation of electronic equipment to avoid interference with air bag wiring. DO NOT place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. English 8 6881095C98-J_SafetyP.book Page 9 Tuesday, May 21, 2013 2:35 PM Operational Warnings (Continued) W A R N I N G Potentially Explosive Atmospheres

(Explosive atmospheres refers to hazard classified locations that may contain hazardous gas, vapors, or dusts.) Turn off your radio prior to entering any area with a potentially explosive atmosphere unless it is a portable radio type especially qualified for use in such areas as Intrinsically Safe (for example, Factory Mutual, CSA, UL, or CENELEC). DO NOT remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted. Blasting Caps and Blasting Areas To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: "Turn off two-way radio." Obey all signs and instructions. 9 English 6881095C98-J_SafetyP.book Page 10 Tuesday, May 21, 2013 2:35 PM Operational Cautions C a u t i o n Antennas DO NOT use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury, such as burns, if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Intrinsically Safe Radio Information The Intrinsically safe approval unit refers to a product that has been approved as intrinsically safe by an approval agency (for example FM Approvals, CSA, UL, or Cenelec) and certifies that a particular product meets the Agency's applicable intrinsic safety standards for specific types of hazardous classified locations. A portable radio that has been approved for intrinsic safety will have Approval label attached to the radio to identify the unit as being Approved for specified hazardous atmospheres. This label specifies the hazardous Class/Division/Group along with the part number of the battery that must be used. The Intrinsically Safe Approval Label will be located on the portable radio unit. English 10 6881095C98-J_SafetyP.book Page 11 Tuesday, May 21, 2013 2:35 PM Operational Cautions for Intrinsic Safe Equipment C a u t i o n DO NOT operate radio communications equipment in a hazardous atmosphere unless it is a type especially qualified (for example, FM, UL, CSA, or CENELEC approved). An explosion or fire may result. DO NOT operate a radio unit that has been approved as intrinsically safe product in a hazardous atmosphere if it has been physically damaged (for example, cracked housing). An explosion or fire may result. DO NOT replace or charge batteries in a hazardous atmosphere. Contact sparking may occur while installing or removing batteries and cause an explosion or fire. Warnings for Radios Approved as Intrinsically Safe Radios must ship from the Motorola manufacturing facility with the hazardous atmosphere capability and the intrinsic safety approval labelling (FM, UL, CSA, CENELEC). Radios will not be upgraded to this capability and labeled once they have been shipped to the field. A modification changes the units hardware from its original design configuration. Modifications can only be made by the original product manufacturer. 11 English 6881095C98-J_SafetyP.book Page 12 Tuesday, May 21, 2013 2:35 PM W A R N I N G Repair W A R N I N G DO NOT replace or change accessories in a hazardous atmosphere. Contact sparking may occur while installing or removing accessories and cause an explosion or fire. Turn the radio off before removing or installing a battery or accessory. DO NOT disassemble an intrinsically safe product in any way that exposes the internal circuits of the unit. Failure to use an intrinsically safe approved battery or Approved accessories specifically approved for the radio unit may result in the dangerously unsafe condition of an unapproved radio combination being used in a hazardous location. Unauthorized or incorrect modification of the intrinsically safe approved Product will negate the approval rating of the product. Incorrect repair or relabeling of any intrinsically safe Agency-

approved radio could adversely affect the Approval rating of the unit. Use of a radio that is not intrinsically safe in a hazardous atmosphere could result in serious injury or death. REPAIRS FOR MOTOROLA PRODUCTS WITH INTRINSICALLY SAFE APPROVAL ARE THE RESPONSIBILITY OF THE USER. Repairs to a Motorola FM approved radio product should only be done at a location that has been FM audited under the FM 3605 repairs and service standard. Contact Motorola for assistance regarding repairs and service of Motorola intrinsically safe equipment. English 12 6881095C98-J_SafetyP.book Page 13 Tuesday, May 21, 2013 2:35 PM A repair constitutes something done internally to the unit that would bring it back to its original condition. Items not considered as repairs are those in which an action is performed on a unit which does not require the outer casing of the unit to be opened in a manner that exposes the internal electrical circuits of the unit. Do Not Substitute Options or Accessories The Motorola communications equipment certified as intrinsically safe by the approving agency, (FM, UL, CSA, CENELEC) is tested as a complete system which consists of the listed agency Approved portable, Approved battery, and Approved accessories or options, or both. This Approved portable and battery combination must be strictly observed. There must be no substitution of items, even if the substitute has been previously Approved with a different Motorola communications equipment unit. Approved configurations are listed by the Approving Agency (FM, UL, CSA, CENELEC). The Intrinsically Safe Approval Label affixed to radio refers to the intrinsically safe classification of that radio product, and the approved batteries that can be used with that system. The manual PN referenced on the Intrinsically Safe Approval Label identifies the approved Accessories and or options that can be used with that portable radio unit. Using a non-Motorola-intrinsically-safe battery and or accessory with the Motorola approved radio unit will void the intrinsically safe approval of that radio unit. 13 English 6881095C98-J_SafetyP.book Page 14 Tuesday, May 21, 2013 2:35 PM Notes:

English 14 6881095C98-J_SafetyP.book Page 15 Tuesday, May 21, 2013 2:35 PM GUIA DE SEGURANA DO PRODUTO E EXPOSIO ENERGIA DE RF PARA RDIOS PORTTEIS BIDIRECIONAIS ATENO!

Antes de usar o rdio, leia este guia que contm instrues operacionais importantes para uso seguro, informaes sobre conscientizao e controle de exposio energia de radiofrequncia (RF) para conformidade com os padres e regulamentos aplicveis. MOTOROLA, MOTO, MOTOROLA SOLUTIONS e a letra "M"

estilizada do logotipo so marcas comerciais ou marcas registradas da Motorola Trademark Holdings, LLC e so utilizadas sob licena. Todas as demais marcas registradas so de propriedade de seus respectivos proprietrios. 2007 2013 Motorola Solutions, Inc. Todos os direitos reservados. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, E.U.A.

*NNTN7223F*

NNTN7223F 6881095C98-J Portugus do Brasil 6881095C98-J_SafetyP.book Page 16 Tuesday, May 21, 2013 2:35 PM Informaes sobre Conscientizao e Controle de Exposio RF e Instrues Operacionais para Uso Ocupacional COMUNICADO: este rdio destina-se ao uso em condies ocupacionais/

controladas, em que os usurios tm total conhecimento de sua exposio e possam exercer controle sobre sua exposio para atender aos limites ocupacionais definidos pela FCC e pelos padres internacionais. O dispositivo de rdio NO autorizado para uso pela populao em geral. Este rdio bidirecional usa energia eletromagntica no espectro de RF para fornecer comunicao distncia entre dois ou mais usurios. Ele usa energia de RF ou ondas de rdio para enviar e receber chamadas. A energia de RF uma forma de energia eletromagntica. Outras formas incluem, mas no so limitadas a, raios, raios solares e raios X. A energia de RF, entretanto, no deve ser confundida com essas outras formas de energia eletromagntica, que quando so usadas incorretamente, podem causar danos biolgicos. Nveis muito altos de raios X, por exemplo, podem danificar tecidos e material gentico. Especialistas em cincias, engenharia, medicina, sade e indstrias trabalham com organizaes para desenvolver padres de exposio segura energia de RF. Esses padres fornecem nveis recomendados de exposio RF para trabalhadores e para o pblico em geral. Os nveis recomendados de exposio RF incluem margens de segurana substanciais. Todos os rdios bidirecionais da Motorola so projetados, fabricados e testados para garantir que atendam aos nveis de exposio RF estabelecidos pelo governo. Alm disso, os fabricantes tambm recomendam instrues operacionais especficas para usurios de rdios bidirecionais. Essas instrues so importantes porque informam aos usurios sobre a exposio energia de RF e fornecem procedimentos simples sobre como controlar essa exposio. Portugus do Brasil 16 6881095C98-J_SafetyP.book Page 17 Tuesday, May 21, 2013 2:35 PM Consulte os sites a seguir para obter mais informaes sobre a exposio energia de RF e como controlar a exposio para garantir conformidade com os limites de exposio RF estabelecidos:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/

www.motorolasolutions.com/rfhealth Regulamentos da FCC Ao usar rdios bidirecionais por motivos de trabalho, a FCC (Federal Communication Commission, comisso federal de comunicao) requer que os usurios estejam totalmente conscientes e aptos a controlar sua exposio de modo a atender s exigncias ocupacionais. A conscientizao da exposio pode ser facilitada pelo uso de uma etiqueta no produto, direcionando o usurio para informaes de conscientizao especficas do usurio. O rdio bidirecional da Motorola possui uma Etiqueta no Produto sobre Exposio RF. Alm disso, o manual do usurio da Motorola, ou folheto de segurana em separado, inclui informaes e instrues operacionais necessrias para controlar a exposio RF e atender aos requisitos de conformidade. Conformidade com os Padres de Exposio RF O rdio bidirecional da Motorola foi projetado e testado para estar em conformidade com vrios padres e com as diretrizes nacionais e internacionais (listados a seguir) para exposio de seres humanos energia eletromagntica de radiofrequncia. Este rdio est em conformidade com os limites de exposio IEEE (Institute of Electrical and Electronic Engineers, instituto de engenheiros eltricos e eletrnicos) (FCC) e ICNIRP para ambientes ocupacionais/controlados de exposio RF em fatores operacionais de trabalho de at 50% de fala e 50%

de escuta e est aprovado apenas para uso ocupacional. Para medio de energia de RF para conformidade com essas diretrizes de exposio, o rdio gera energia de RF mensurvel apenas quando est transmitindo (na fala), no quando est recebendo (escuta) ou no modo de espera. 17 Portugus do Brasil 6881095C98-J_SafetyP.book Page 18 Tuesday, May 21, 2013 2:35 PM NOTA: As baterias aprovadas, fornecidas com o rdio, so para um fator de trabalho 5-5-90 (5% de fala-5% de escuta-90% de espera) apesar de o rdio estar em conformidade com os limites de exposio ocupacional da FCC e poder operar em fatores de trabalho de at 50% de fala. O rdio bidirecional da Motorola est em conformidade com os seguintes padres e diretrizes de exposio de energia de RF:

Cdigo de Regulamentos Federais da FCC; 47 CFR et seq. e FCC, OET Boletim 65 IEEE C95.1 ICNIRP (International Commission on Non-ionizing Radiation Protection. comisso internacional para a proteo contra as radiaes no ionizantes) Cdigo de segurana 6 do Ministrio da Sade (Canad) e da Indstria Canadense RSS-102 Australian Communications Authority Radiocommunications Standard et seq. ANEXO da ANATEL Resoluo n 303 et seq. Diretrizes de Conformidade e Controle de Exposio RF e Instrues Operacionais Relacionadas a Operaes de Rdios Bidirecionais Para controlar a exposio e garantir conformidade com os limites de exposio em ambientes ocupacionais/controlados, siga sempre os procedimentos a seguir. NO remova a Etiqueta de Exposio RF do dispositivo. As instrues de conscientizao do usurio devem acompanhar o dispositivo quando transferido para outros usurios. Portugus do Brasil 18 6881095C98-J_SafetyP.book Page 19 Tuesday, May 21, 2013 2:35 PM Operao do Rdio Bidirecional No transmitir alm do fator calculado nominal de 50% do tempo. Para transmitir (falar), pressione o boto PTT (Push-To-Talk). Para receber chamadas, solte o boto PTT. O boto PTT pode estar localizado no rdio ou em acessrios aprovados com ou sem fio (por exemplo, um boto PTT remoto compatvel com Bluetooth). importante transmitir em 50% do tempo ou menos, pois este rdio gera exposio RF mensurvel somente ao transmitir

(em termos de medio para conformidade de padres). Em frente do rosto. Segure o rdio na posio vertical com o microfone (e outras partes do rdio incluindo a antena) a, no mnimo, 2,5 centmetros de distncia do nariz e da boca. Manter o rdio distncia apropriada importante para garantir a conformidade. NOTA: quanto maior o distanciamento da antena, menores as exposies RF. Uso junto ao corpo. Ao usar o rdio junto ao corpo, coloque-o em um prendedor, suporte, suporte para cinto ou estojo para este produto aprovado pela Motorola. importante usar os acessrios aprovados para uso junto ao corpo, porque o uso de acessrios no aprovados pela Motorola pode resultar em nveis de exposio que excedem os limites de exposio RF para ambiente ocupacional/controlado. Use somente antenas, baterias e acessrios de udio fornecidos ou de substituio aprovados pela Motorola. O uso de antenas, baterias e acessrios com ou sem fio no aprovados pela Motorola, pode exceder as diretrizes aplicveis de exposio RF (IEEE, ICNIRP ou FCC). Para obter uma lista de acessrios aprovados pela Motorola para o modelo de seu rdio, acesse o site:

http://www.motorolasolutions.com/governmentandenterprise 19 Portugus do Brasil 6881095C98-J_SafetyP.book Page 20 Tuesday, May 21, 2013 2:35 PM Interferncia/Compatibilidade Eletromagntica NOTA: quase todo dispositivo eletrnico suscetvel interferncia eletromagntica (EMI) quando blindado, projetado ou de alguma forma configurado inadequadamente para compatibilidade eletromagntica. Instalaes Para evitar interferncia eletromagntica e/ou conflitos de compatibilidade, desligue o rdio em qualquer instalao onde haja avisos dizendo para faz-lo. Hospitais e casas de sade podem utilizar equipamentos sensveis energia de RF externa. Aeronaves Desligue seu rdio a bordo de aeronaves, quando orientado a faz-lo. O rdio deve ser utilizado de acordo com as instrues fornecidas pela tripulao. Equipamentos Mdicos Marca-passos A AdvaMed (Advanced Medical Technology Association) recomenda que seja mantida uma distncia mnima de 15 cm entre um rdio porttil sem fio e um marca-passo. Estas recomendaes so consistentes com as determinaes da FDA (rgo de vigilncia sanitria do governo dos EUA). Os portadores de marca-passos devem:

Manter SEMPRE o rdio a mais de 15 cm do marca-passo quando o rdio estiver ligado. No levar o rdio no bolso da camisa. Usar o aparelho no ouvido do lado oposto ao do marca-passo para reduzir a possibilidade de interferncia. DESLIGAR o rdio imediatamente se houver qualquer motivo para se suspeitar de interferncia. Portugus do Brasil 20 6881095C98-J_SafetyP.book Page 21 Tuesday, May 21, 2013 2:35 PM Aparelhos Auditivos Alguns rdios digitais sem fio podem interferir em aparelhos auditivos. Caso haja esse tipo de interferncia, consulte o fabricante do aparelho auditivo para obter alternativas. Outros Equipamentos Mdicos Caso use outros equipamentos mdicos, consulte o fabricante para verificar se ele est adequadamente protegido contra energia de RF. Seu mdico pode ajud-lo a obter essas informaes. Uso de Equipamentos de Comunicao Durante a Operao de Veculos Informe-se sempre sobre as leis e normas a respeito do uso de rdios nas reas onde voc dirige. Preste ateno no trnsito e na rodovia. Use a opo viva-voz, se disponvel. Saia da rodovia e estacione o carro antes de fazer ou receber uma ligao, se as condies de trnsito ou as regulamentaes assim exigirem. 21 Portugus do Brasil 6881095C98-J_SafetyP.book Page 22 Tuesday, May 21, 2013 2:35 PM Segurana Acstica A exposio a rudos muito altos de qualquer origem por longos perodos pode prejudicar sua audio temporria ou permanentemente. Quanto mais alto for o volume do rdio, menos tempo ser necessrio para prejudicar sua audio. s vezes, os danos auditivos causados por rudos fortes no so detectados em sua fase inicial e podem ter efeito cumulativo. Para proteger sua audio:

Use o volume mais baixo necessrio para a execuo sua tarefa. S aumente o volume se estiver em ambientes com excesso de rudos. Reduza o volume antes de conectar o headset ou o fone de ouvido. Limite o tempo de uso dos headsets ou fones de ouvido com volume alto. Ao usar o rdio sem monofones ou fones de ouvido, no coloque o alto-falante do rdio diretamente em contato com seus ouvidos. Avisos Operacionais ATENO Para Veculos Equipados com Air Bag:

Consulte o manual do fabricante do veculo antes de instalar equipamentos eletrnicos para evitar interferncia com o funcionamento do air bag. NO coloque um rdio porttil na rea sobre um air bag ou na rea de liberao do air bag, pois eles inflam com muita fora. Se um rdio porttil estiver colocado na rea de liberao do air bag e o air bag inflar, o rdio poder ser impelido com grande fora e causar srios ferimentos aos ocupantes do veculo. Portugus do Brasil 22 6881095C98-J_SafetyP.book Page 23 Tuesday, May 21, 2013 2:35 PM Avisos Operacionais (continuao) ATENO Ambientes potencialmente explosivos

(Ambientes potencialmente explosivos referem-se a locais classificados como de risco que podem conter gases, vapores ou ps nocivos.) Desligue o rdio antes de entrar em uma rea com ambiente potencialmente explosivo, a menos que ele seja um tipo de rdio porttil especialmente qualificado para o uso em tais reas como Intrinsecamente Seguro (por exemplo, Factory Mutual, CSA, UL ou CENELEC). NO remova, instale ou carregue baterias nessas reas. Fascas em um ambiente potencialmente explosivo podem causar uma exploso ou incndio que pode resultar em ferimentos e at mesmo em morte. As reas com ambientes potencialmente explosivos referidas acima incluem reas de abastecimento, como reas abaixo do convs principal em barcos, instalaes de armazenamento ou transferncia de produtos qumicos ou combustveis e reas onde o ar contm partculas ou elementos qumicos, como fibras, poeira ou ps metlicos. As reas com ambientes potencialmente explosivos so frequentes, mas nem sempre h avisos sobre isso. reas e Equipamentos para Detonao Para evitar possveis interferncias em operaes de detonao, desligue o rdio quando estiver prximo a detonadores eltricos, reas de detonao ou reas onde haja avisos tais como: "Desligue o rdio bidirecional." Obedea a todas as sinalizaes e instrues. 23 Portugus do Brasil 6881095C98-J_SafetyP.book Page 24 Tuesday, May 21, 2013 2:35 PM Cuidados Operacionais Precauo Antenas NO utilize um rdio porttil com antena danificada. Se a antena danificada entrar em contato com sua pele, poder causar uma queimadura leve. Baterias Todas as baterias podem causar danos materiais e ferimentos, tais como queimaduras, se um material condutor como uma joia, chave ou corrente tocar os terminais expostos. O material condutor pode fechar um circuito eltrico (curto-circuito) e esquentar muito. Tenha cuidado ao manipular uma bateria carregada, principalmente ao coloc-la dentro do bolso, de uma bolsa ou em outro local em que haja objetos de metal. Informaes sobre Rdio Intrinsecamente Seguro A unidade de aprovao Intrinsecamente seguro refere-se a um produto que foi aprovado como intrinsecamente seguro por um rgo de aprovao (por exemplo, FM Approvals, CSA, UL ou Cenelec) e certifica que um determinado produto atende aos padres de segurana intrnseca aplicveis do rgo para determinados tipos de locais classificados como de risco. Um rdio porttil que foi aprovado como intrinsecamente seguro ter uma etiqueta de aprovao no rdio para identificar a unidade como aprovada para uso nas atmosferas de risco especificadas. Essa etiqueta especifica a classe, a diviso e o grupo de risco, bem como o nmero de pea da bateria que dever ser utilizada. A Etiqueta de Aprovao de Intrinsecamente Seguro estar localizada na unidade de rdio porttil. Portugus do Brasil 24 6881095C98-J_SafetyP.book Page 25 Tuesday, May 21, 2013 2:35 PM Cuidados na Operao de Equipamento de Segurana Intrnseca Precauo NO opere o equipamento de comunicaes de rdio em atmosferas de risco a menos que seja um tipo especialmente qualificado (por exemplo, aprovado pela FM, UL, CSA, ou CENELEC). O resultado poder ser uma exploso ou fogo. NO opere uma unidade de rdio aprovada como intrinsecamente segura em atmosferas de risco se ela estiver danificada fisicamente

(por exemplo, parte externa rachada). O resultado poder ser uma exploso ou fogo. NO substitua ou carregue baterias em atmosfera de risco. Podem ocorrer fascas no contato durante a instalao ou remoo das baterias, causando exploso ou fogo. Avisos para Rdios Aprovados como Intrinsecamente Seguros Os rdios devem ser enviados da fbrica da Motorola com a etiqueta de aprovao de recursos para atmosfera de risco e de segurana intrnseca (FM, UL, CSA, CENELEC). Os rdios no sero atualizados para esse recurso e etiquetados depois de serem enviados. Uma modificao altera o hardware da unidade da sua configurao de projeto original. As modificaes podem ser feitas apenas pelo fabricante original do produto. 25 Portugus do Brasil 6881095C98-J_SafetyP.book Page 26 Tuesday, May 21, 2013 2:35 PM ATENO NO substitua nem mude os acessrios em uma atmosfera de risco. Podem ocorrer fascas no contato durante a instalao ou remoo dos acessrios e causar exploso ou fogo. Desligue o rdio antes de remover ou instalar a bateria ou acessrio. NO desmonte um produto intrinsecamente seguro de forma a expor os circuitos internos da unidade. Se uma bateria intrinsecamente segura ou acessrios aprovados especificamente para o rdio no forem usados, poder resultar em uma condio insegura perigosa de uma combinao no aprovada sendo usada em um local de risco. A modificao incorreta ou no autorizada do Produto aprovado intrinsecamente seguro negar a aprovao da classificao do produto. Os reparos ou etiquetagem incorretos de um rdio aprovado como intrinsecamente seguro podero afetar a aprovao da classificao da unidade. O uso de um rdio que no intrinsecamente seguro em uma atmosfera de risco poder resultar em danos graves e at em morte. Reparos ATENO OS REPAROS DE PRODUTOS DA MOTOROLA COM APROVAO INTRINSECAMENTE SEGURA SO DE RESPONSABILIDADE DO USURIO. Os reparos em um rdio aprovado Motorola FM devero ser feitos apenas em um local auditado pela FM sob a norma de reparos e servios FM 3605. Entre em contato com a Motorola para obter assistncia sobre reparos e servios em equipamentos Motorola intrinsecamente seguros. Portugus do Brasil 26 6881095C98-J_SafetyP.book Page 27 Tuesday, May 21, 2013 2:35 PM Um reparo constitui algo sendo feito internamente na unidade que a retornar as suas condies originais. Os itens que no so considerados como reparos so os em que a ao realizada em uma unidade que no precisa que a parte externa seja aberta para expor os circuitos eltricos internos da unidade. No Substitua Opes ou Acessrios O equipamento de comunicao Motorola certificado como intrinsecamente seguro pelos rgos de aprovao (FM, UL, CSA, CENELEC), testado como um sistema completo que consiste do porttil aprovado, bateria aprovada e acessrios e/ou opes aprovados pelo rgo listado. Essa combinao de porttil e bateria aprovada deve ser estritamente observada. No pode haver substituio de itens, mesmo se o substituto tiver sido aprovado previamente com um equipamento de comunicaes Motorola diferente. As configuraes aprovadas so listadas pelo rgo Aprovador (FM, UL, CSA, CENELEC). A Etiqueta de Aprovao de Intrinsecamente Seguro afixada ao rdio refere-se classificao de intrinsecamente seguro do rdio e da bateria aprovada que pode ser usada com o sistema. O PN manual referenciado na Etiqueta de Aprovao de Intrinsecamente Seguro identifica os acessrios ou opes aprovados que podem ser usados com a unidade de rdio porttil. O uso de uma bateria e/ou acessrio intrinsecamente seguro no Motorola com a unidade de rdio aprovada da Motorola invalidar a aprovao de segurana intrnseca da unidade de rdio. 27 Portugus do Brasil 6881095C98-J_SafetyP.book Page 28 Tuesday, May 21, 2013 2:35 PM Notas:

Portugus do Brasil 28 6881095C98-J_SafetyP.book Page 29 Tuesday, May 21, 2013 2:35 PM RADIOS BIDIRECTIONNELLES PORTATIVES :

EXPOSITION AUX RADIOFRQUENCES ET SCURIT DU PRODUIT ATTENTION!

Avant d'utiliser cette radio, lisez le guide, qui contient d'importantes instructions de fonctionnement pour une utilisation scuritaire et des informations sur l'exposition aux frquences radiolectriques, dans le but dassurer votre conformit aux normes et rglements en vigueur. MOTOROLA, MOTO, MOTOROLA SOLUTIONS et le logotype au M stylis sont des marques de commerce ou des marques dposes de Motorola Trademark Holdings LLC et sont utilises sous licence. Toutes les autres marques de commerce sont la proprit de leurs titulaires respectifs. 2007 2013 Motorola Solutions, Inc. Tous droits rservs. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, U.S.A.

*NNTN7223F*

NNTN7223F 6881095C98-J Franais Canadien 6881095C98-J_SafetyP.book Page 30 Tuesday, May 21, 2013 2:35 PM Sensibilisation l'exposition l'nergie de RF, moyens de contrle et consignes d'utilisation pour l'usage professionnel de cette radio NOTICE :Cette radio a t conue pour un usage professionnel dans un environnement contrl, o les utilisateurs sont pleinement conscients de l'exposition l'nergie de RF laquelle ils sont soumis et peuvent exercer un contrle sur cette exposition afin de respecter les limites tablies par la FCC et les normes internationales. Ce dispositif radio n'est PAS autoris pour l'utilisation grand public par des consommateurs ordinaires. Cette radio bidirectionnelle utilise de l'nergie lectromagntique dans le spectre de radiofrquence (RF) afin de permettre les communications distance entre deux utilisateurs ou plus. Elle utilise l'nergie de radiofrquence ou les ondes radio pour mettre et recevoir des appels. L'nergie de RF est une forme d'nergie lectromagntique. Ce type d'nergie se prsente sous d'autres formes, notamment la lumire solaire et les rayons X. Il ne faut cependant pas confondre l'nergie de RF avec d'autres formes d'nergie lectromagntique qui, lorsqu'elles sont mal utilises, peuvent occasionner des dommages biologiques. Des niveaux trs levs de rayons X, par exemple, peuvent endommager les tissus et le matriel gntique. Des spcialistes dans les domaines des sciences, de l'ingnierie, de la mdecine, de la sant et de l'industrie travaillent avec diffrentes organisations l'laboration de normes relatives l'exposition scuritaire l'nergie de RF. Ces normes fournissent les niveaux recommands d'exposition aux RF, tant pour les travailleurs que pour le public en gnral. Ces niveaux recommands d'exposition aux RF comprennent des coefficients de scurit apprciables. Toutes les radios bidirectionnelles Motorola sont conues, fabriques et testes de manire garantir leur conformit aux niveaux d'exposition aux radiofrquences tablis par les autorits publiques comptentes. Par ailleurs, les fabricants recommandent aux utilisateurs de radios bidirectionnelles de suivre des directives de fonctionnement spcifiques. Ces directives sont importantes puisqu'elles informent les utilisateurs sur l'exposition l'nergie de RF et proposent des moyens simples pour la contrler. Franais Canadien 30 6881095C98-J_SafetyP.book Page 31 Tuesday, May 21, 2013 2:35 PM Visitez les sites Web suivants pour obtenir plus de renseignements sur ce qu'est l'nergie de RF et sur les moyens de contrle prendre afin de respecter les limites tablies en matire d'exposition aux radiofrquences. http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/fr/

www.motorolasolutions.com/rfhealth Rglements de la Commission fdrale amricaine des communications (FCC) Lorsque les radios bidirectionnelles sont utilises des fins professionnelles, la FCC exige que les utilisateurs soient pleinement conscients des effets de l'exposition et qu'ils soient capables de contrler le niveau d'exposition auquel ils se soumettent afin de rpondre aux exigences de leur profession. Vous pouvez contribuer la sensibilisation des utilisateurs l'exposition aux radiofrquences en apposant des tiquettes de produit leur offrant une rfrence vers la source d'information approprie. Votre radio bidirectionnelle Motorola comporte une tiquette de produit sur l'exposition aux radiofrquences. D'autre part, vous trouverez dans le manuel de l'utilisateur du produit Motorola ou dans la brochure de scurit fournie sparment les informations requises et le mode d'emploi permettant de contrler l'exposition l'nergie de RF et de garantir le respect des normes. Conformit aux normes sur l'exposition aux radiofrquences Cette radio bidirectionnelle Motorola a t conue et teste afin de garantir sa conformit aux normes et recommandations nationales et internationales ci-dessous lies l'exposition des tres humains l'nergie lectromagntique de radiofrquence. Cette radio respecte les limites d'exposition tablies par l'IEEE (FCC) et l'ICNIRP pour les environnements professionnels ou avec contrle d'exposition aux radiofrquences, des cycles d'utilisation allant jusqu' 50 % mission 50 % rception et est approuve pour un usage professionnel seulement. En ce qui concerne la mesure de l'nergie de RF afin d'valuer la conformit ces normes d'exposition, la radio met de l'nergie de RF mesurable seulement lorsqu'elle est en mode mission (lorsque l'utilisateur parle), et non pas lorsqu'elle est en mode rception (lorsque l'utilisateur coute) ni en mode Attente. 31 Franais Canadien 6881095C98-J_SafetyP.book Page 32 Tuesday, May 21, 2013 2:35 PM REMARQUE : Les batteries approuves, fournies avec cette radio, sont cotes en fonction d'un cycle d'utilisation de 5-5-90 (5% mission5 % rception 90 % attente), mme si la radio respecte les limites d'exposition tablies par la FCC pour l'usage professionnel et peut fonctionner selon des cycles d'utilisation allant jusqu' 50 % mission. Cette radio bidirectionnelle Motorola est conforme aux normes et aux lignes directrices suivantes relatives l'exposition l'nergie de RF :

Commission fdrale amricaine des communications (FCC), Code of Federal Regulations (code de la rglementation fdrale); FCC 47 partie CFR et suiv. FCC, OET Bulletin 65 Institute of Electrical and Electronic Engineers (IEEE) C95.1 Commission internationale de protection contre les rayonnements non ionisants

(ICNIRP) Code de scurit 6 du Ministre de la Sant (Canada) et norme CNR-102 d'Industrie Canada Norme de l'Australian Communications Authority Radiocommunications et suiv. ANATEL ANNEXE la Rsolution N 303 et suiv. Directives de conformit et de contrle de l'exposition aux RF et directives de fonctionnement pour la communication bidirectionnelle Pour contrler votre exposition et garantir le respect des limites d'exposition en milieu professionnel ou contrl, observez toujours les consignes suivantes. NE dcollez PAS l'tiquette sur l'exposition l'nergie de RF du dispositif. Lorsque l'appareil est cd d'autres utilisateurs, il doit tre accompagn des informations de sensibilisation des utilisateurs. Franais Canadien 32 6881095C98-J_SafetyP.book Page 33 Tuesday, May 21, 2013 2:35 PM Communication bidirectionnelle Transmission ne dpassant pas le facteur nominal de 50 % du temps. Pour transmettre (parler), appuyez sur le bouton de transmission (PTT). Pour recevoir les appels, relchez le bouton de transmission. Le bouton PTT peut se trouver sur la radio elle-mme ou sur un accessoire avec ou sans fil approuv (par exemple, un bouton de transmission Bluetooth distant). Il est important de ne pas mettre plus de 50 % du temps tant donn que cette radio gnre une nergie de RF dont l'exposition n'est mesurable que lors de l'mission (en termes de conformit aux normes de mesure). Devant le visage. Tenez la radio la verticale, en maintenant une distance d'au moins 2,5 centimtres (1 pouce) entre le micro (et les autres parties de la radio, y compris l'antenne) et le nez ou les lvres. Garder la radio une distance approprie est important afin de garantir le respect des limites. REMARQUE : L'exposition aux radiofrquences diminue quand la distance de l'antenne augmente. Utilisation lorsque la radio est porte sur soi. Lorsque la radio est porte sur soi, utilisez toujours une pince ou une attache de ceinture, placez-la dans un tui ou dans un harnais pour le corps approuv par Motorola pour ce produit. Il est important d'utiliser des accessoires ajusts au corps qui sont approuvs, car dans le cas contraire, l'utilisateur risque de s'exposer des niveaux d'nergie de RF suprieurs aux limites tablies pour les environnements professionnels ou exposition contrle. N'utilisez que des antennes, des batteries et des accessoires audio fournis ou de remplacement approuvs par Motorola. L'utilisation d'antennes, batteries et accessoires avec ou sans fil non approuvs par Motorola pourrait excder les directives d'exposition aux RF applicables (IEEE, ICNIRP ou FCC). Pour une liste des accessoires approuvs par Motorola pour votre modle de radio, visitez le site Web suivant :

http://www.motorolasolutions.com/governmentandenterprise 33 Franais Canadien 6881095C98-J_SafetyP.book Page 34 Tuesday, May 21, 2013 2:35 PM Interfrence/compatibilit lectromagntique REMARQUE : La grande majorit des dispositifs lectroniques sont sensibles l'effet lectromagntique perturbateur (EMI) s'ils ne sont pas convenablement protgs ou s'ils ne sont pas conus ou configurs de telle sorte qu'ils soient compatibles avec ce type de signaux lectromagntiques. Btiments Afin d'viter des problmes d'interfrence et/ou de compatibilit lectromagntique, teignez la radio lorsque cette consigne est affiche sur un panneau. Il se peut, par exemple, que les hpitaux ou les tablissements de sant utilisent des appareils sensibles l'nergie de RF externe. Aronefs bord d'un avion, teignez la radio lorsque l'quipage vous le demande. Toute utilisation de la radio doit se faire conformment aux rglements en vigueur de la compagnie arienne et sur instructions de l'quipage. Appareils mdicaux Stimulateurs cardiaques L'Association de technologie mdicale avance (AdvaMed, Advanced Medical Technology Association) recommande de conserver une distance minimale de 15 centimtres (6 pouces) entre une radio portative sans fil et un stimulateur cardiaque. Ces recommandations concordent avec les dispositions de l'office amricain de contrle des produits pharmaceutiques et alimentaires (FDA, Food and Drug Administration). Franais Canadien 34 6881095C98-J_SafetyP.book Page 35 Tuesday, May 21, 2013 2:35 PM Les personnes qui portent un stimulateur cardiaque doivent :

TOUJOURS maintenir la radio plus de 15 centimtres (6 pouces) de leur stimulateur cardiaque lorsque la radio est sous tension. Ne pas porter la radio dans une poche-portefeuille. Placer la radio au niveau de l'oreille oppose au stimulateur cardiaque afin de minimiser la possibilit de brouillage. teindre la radio immdiatement si elles ont des raisons de penser qu'il existe une interfrence quelconque. Prothses auditives Certaines radios numriques sans fil peuvent interfrer avec certains types d'aides auditives. Si tel est le cas, veuillez consulter le fabricant de la prothse auditive pour discuter d'autres solutions possibles. Autres dispositifs mdicaux Si vous utilisez tout autre dispositif mdical personnel, consultez le fabricant du dispositif afin de dterminer s'il est convenablement protg contre l'nergie de RF externe. Votre mdecin peut vous aider obtenir ces renseignements. Utilisation de dispositifs de communication pendant la conduite d'un vhicule Vrifiez toujours les lois et rglements relis l'utilisation des radios dans les rgions o vous conduisez. Concentrez-vous entirement sur votre conduite et sur la route. Utilisez le mode mains libres, s'il est disponible. Rangez-vous sur l'accotement avant de faire un appel ou d'y rpondre si les conditions de conduite sont particulirement mauvaises ou si les lois et rglements l'exigent. 35 Franais Canadien 6881095C98-J_SafetyP.book Page 36 Tuesday, May 21, 2013 2:35 PM Protection de l'oue Une exposition des bruits forts en provenance de n'importe quelle source pendant de longues priodes de temps pourrait affecter votre audition de manire temporaire ou permanente. Plus le volume sonore de la radio est lev, plus votre audition peut se dtriorer rapidement. Des dommages auditifs dus l'exposition des bruits forts peuvent d'abord tre indtectables, mais ceux-ci ont parfois des effets cumulatifs. Pour protger votre audition :

Rglez le volume le plus bas possible pour effectuer votre travail. Montez le volume seulement si vous vous trouvez dans un environnement bruyant. Baissez le volume avant d'ajouter un casque ou une oreillette. Limitez la priode de temps d'utilisation de casques ou d'couteurs volume lev. Lorsque vous utilisez la radio sans casque ni couteur, ne placez pas le haut-parleur directement sur votre oreille. Avertissements de fonctionnement AVERTISSEMENT Pour les vhicules quips de coussins gonflables :

Consultez le manuel du fabricant du vhicule avant d'installer un appareil lectronique, afin d'viter toute interfrence avec le cblage des coussins gonflables. NE placez PAS de radio portative dans la zone situe au-dessus d'un coussin gonflable ou dans la zone de dploiement de ce dernier. Un coussin gonflable de scurit se dploie avec beaucoup de force. Si une radio portative se trouve dans la zone de dploiement du coussin lorsque celui-ci se gonfle, la radio peut tre propulse avec une force considrable et risque alors d'occasionner de graves lsions corporelles aux passagers du vhicule. Franais Canadien 36 6881095C98-J_SafetyP.book Page 37 Tuesday, May 21, 2013 2:35 PM Avertissements de fonctionnement (suite) AVERTISSEMENT Atmosphres potentiellement explosives

(Les atmosphres explosives sont des endroits classifis comme dangereux, pouvant contenir des vapeurs, des poudres ou des gaz dangereux.) teignez la radio avant d'entrer dans un milieu avec une atmosphre potentiellement explosive, sauf s'il s'agit d'une radio portative de type scurit intrinsque spcialement conue pour l'utilisation dans un tel milieu (par exemple, s'il s'agit d'une radio homologue par Factory Mutual, CSA, UL ou CENELEC). VITEZ d'enlever, de remplacer ou de recharger les batteries dans un tel milieu. Les tincelles dans des atmosphres potentiellement explosives peuvent provoquer une explosion ou un incendie et entraner des lsions corporelles, voire la mort. Parmi les zones potentiellement explosives mentionnes plus haut, citons les zones de ravitaillement en carburant, par exemple la cale des bateaux, les installations de transfert et de stockage de carburant ou de produits chimiques et les zones dans lesquelles l'air est charg en produits chimiques ou en particules telles que de la poudre de crales, de la poussire ou des poudres mtalliques. Les zones atmosphres potentiellement explosives affichent gnralement des panneaux de mise en garde, mais ce n'est pas toujours le cas. Zone de dynamitage et de dtonateurs teignez la radio lorsque vous vous trouvez proximit de dtonateurs lectriques ou dans une zone de dynamitage afin d'viter de dclencher une explosion, ou lorsque vous vous trouvez dans un endroit o il est indiqu : teindre les radios bidirectionnelles . Respectez tous les panneaux et toutes les consignes. 37 Franais Canadien 6881095C98-J_SafetyP.book Page 38 Tuesday, May 21, 2013 2:35 PM Prcautions relatives au fonctionnement Prcaution Antennes N'utilisez PAS une radio portative, quelle qu'elle soit, dont l'antenne est endommage. Si une antenne endommage entre en contact avec votre peau, il peut en rsulter une brlure lgre. Batteries Toutes les batteries peuvent provoquer des dommages, des blessures ou des brlures si un objet conducteur, par exemple un bijou, une cl ou les mailles d'une chane, entre en contact avec les bornes de la batterie. Le matriel conducteur risque de fermer un circuit lectrique (court-circuit) et de devenir trs chaud. Manipulez avec prcaution les batteries charges, en particulier lorsqu'elles sont places dans une poche, un sac main ou tout autre endroit contenant des objets mtalliques. Informations sur les radios scurit intrinsque L'homologation titre de produit scurit intrinsque indique qu'un produit a t reconnu intrinsquement scuritaire par un service d'homologation (par exemple, FM Approvals, CSA, UL ou Cenelec) et certifie qu'un produit particulier rpond aux normes applicables du service d'homologation en matire de scurit pour certains types particuliers de milieux dangereux classifis. Toute radio portative ayant t agre de scurit intrinsque doit porter l'tiquette d'homologation correspondante qui l'identifie comme tant agre pour un usage dans des atmosphres dangereuses spcifies. L'tiquette spcifie la catgorie de risque laquelle correspond la batterie (Classe/Division/Groupe), ainsi que le numro de rfrence de la batterie qui doit tre utilis. L'tiquette d'homologation d'un dispositif de scurit intrinsque doit tre appose sur l'unit de radio portative. Franais Canadien 38 6881095C98-J_SafetyP.book Page 39 Tuesday, May 21, 2013 2:35 PM Prcautions relatives au fonctionnement de l'quipement de scurit intrinsque Prcaution NE PAS faire fonctionner d'appareil de communication radio dans une atmosphre dangereuse moins qu'il ne soit d'un type appropri

(par exemple, homologu par FM, UL, CSA ou CENELEC). Vous risquez de provoquer une explosion ou un incendie. NE PAS faire fonctionner une radio scurit intrinsque homologue dans une atmosphre dangereuse si la radio est endommage (par exemple, si son botier est fendu). Vous risquez de provoquer une explosion ou un incendie. NE PAS remplacer NI charger des batteries dans une atmosphre dangereuse. La production d'tincelles lors de l'installation ou du retrait des batteries prsente un risque d'incendie ou d'explosion. Avertissements concernant les radios agres de scurit intrinsque Les radios doivent offrir la possibilit d'utilisation dans une atmosphre dangereuse et porter l'tiquette d'homologation titre d'appareil scurit intrinsque avant d'tre expdies de l'usine de fabrication de Motorola. Les radios ne pourront tre mises niveau afin d'offrir cette caractristique ni tre tiquetes comme telles une fois expdies et achemines sur le terrain. Toute modification change la configuration du modle d'origine des composants de l'unit. Les modifications ne peuvent tre effectues que par le fabricant du produit d'origine. 39 Franais Canadien 6881095C98-J_SafetyP.book Page 40 Tuesday, May 21, 2013 2:35 PM VITEZ de remplacer ou de changer des accessoires dans une atmosphre dangereuse. Des tincelles peuvent se produire lors de l'installation ou du retrait des accessoires et provoquer un incendie ou une explosion. teignez la radio avant d'enlever ou d'installer une batterie ou un AVERTISSEMENT accessoire. NE PAS dsassembler un produit scurit intrinsque de manire exposer les circuits internes de l'unit. Le fait de ne pas utiliser une batterie scurit intrinsque homologue ou des accessoires approuvs spcialement conus pour le modle de radio utilis peut crer une dangereuse situation de risque cause par l'utilisation d'un ensemble radio non approuv dans un endroit dangereux. Toute modification incorrecte ou non agre du produit agr de scurit intrinsque annulera la classification de ce dernier. La rparation incorrecte ou le nouvel tiquetage de toute radio scurit intrinsque homologue par un service d'homologation risque d'annuler la classe d'homologation de l'unit. L'utilisation d'une radio autre qu'une radio scurit intrinsque dans une atmosphre dangereuse est susceptible d'entraner des blessures graves ou la mort. Rparation AVERTISSEMENT IL INCOMBE L'UTILISATEUR DE FAIRE FAIRE LES RPARATIONS NCESSAIRES AUX PRODUITS MOTOROLA SCURIT INTRINSQUE HOMOLOGUS. La rparation d'une radio Motorola agre par la FMRC doit tre exclusivement effectue dans des locaux superviss par la FMRC rpondant aux normes d'homologation FMRC numro de classe 3605 relatives au service et la rparation. Contactez Motorola afin d'obtenir une assistance pour le service et la rparation d'units Motorola scurit intrinsque. Franais Canadien 40 6881095C98-J_SafetyP.book Page 41 Tuesday, May 21, 2013 2:35 PM Le terme rparation dsigne tout travail effectu sur les composants internes de l'unit afin de ramener celle-ci son tat d'origine. Un travail qui ne ncessite pas l'ouverture du botier de l'unit afin d'en exposer les circuits lectriques internes ne constitue pas une rparation. vitez d'interchanger des options ou des accessoires. L'quipement de communications Motorola certifi de scurit intrinsque par l'entit d'homologation (FMRC, UL, CSA, CENELEC) est test en tant que systme complet, savoir : la radio portative, la batterie, les accessoires et les options, tous agrs par l'entit correspondante. L'intgrit de cette configuration forme d'une radio portative et d'une batterie agres doit tre strictement respecte. Aucune substitution d'lment n'est permise, mme si l'lment de remplacement a pralablement t agr pour une autre unit de communication Motorola. Les configurations agres peuvent tre consultes dans la liste mise disposition par l'entit d'homologation (FMRC, UL, CSA, CENELEC). L'tiquette d'homologation de scurit intrinsque appose sur la radio identifie la classification de scurit intrinsque de cette radio ainsi que les batteries agres qui peuvent tre utilises avec ce systme. Le numro de rfrence du manuel mentionn sur l'tiquette d'homologation de scurit intrinsque identifie les accessoires et/ou les options agrs qui peuvent tre utiliss avec cette unit de radio portative. Le fait de ne pas utiliser une batterie ou un accessoire Motorola de scurit intrinsque avec l'unit de radio Motorola agre annule l'homologation de scurit intrinsque de cette unit de radio. 41 Franais Canadien 6881095C98-J_SafetyP.book Page 42 Tuesday, May 21, 2013 2:35 PM Remarques :

Franais Canadien 42 6881095C98-J_SafetyP.book Page 43 Tuesday, May 21, 2013 2:35 PM GUA DE EXPOSICIN DE ENERGA DE RADIOFRECUENCIA Y SEGURIDAD DEL PRODUCTO PARA RADIOS BIDIRECCIONALES PORTTILES ATENCIN!

Antes de usar este radio, lea esta gua que contiene instrucciones de funcionamiento importantes para un uso seguro del dispositivo e instrucciones para tomar conciencia y controlar la energa de RADIOFRECUENCIA para cumplir con las normas y regulaciones correspondientes. MOTOROLA, MOTO, MOTOROLA SOLUTIONS y el logotipo de la M estilizada son marcas comerciales o marcas comerciales registradas de Motorola Trademark Holdings, LLC y se utilizan bajo licencia. Todas las dems marcas comerciales pertenecen a sus respectivos dueos. 2007 2013 Motorola Solutions, Inc. Todos los derechos reservados. Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, EE.UU.

*NNTN7223F*

NNTN7223F 6881095C98-J Espaol Latinoamericano 6881095C98-J_SafetyP.book Page 44 Tuesday, May 21, 2013 2:35 PM Informacin para tomar conciencia y controlar la exposicin a la energa de RF e instrucciones de funcionamiento para uso profesional AVISO: Este radio est diseado para usarse en condiciones controladas o profesionales, donde los usuarios tengan pleno conocimiento de su exposicin y puedan controlar su exposicin para cumplir con los lmites profesionales de la FCC y de los estndares internacionales. Este dispositivo de radio NO est autorizado para el uso particular de la poblacin en general. El radio bidireccional utiliza energa electromagntica en el espectro de la frecuencia de radio (RF) para lograr la comunicacin a distancia entre dos o ms usuarios. Emplea energa de radiofrecuencia (RF) u ondas de radio para enviar y recibir llamadas. La energa de RF es una forma de energa electromagntica. Otras formas incluyen, por ejemplo, la luz solar y los rayos X. Sin embargo, no debe confundirse la energa de RF con otras formas de energa electromagntica que, al usarse de manera incorrecta, pueden producir daos biolgicos. Los niveles muy elevados de rayos X, por ejemplo, pueden daar los tejidos y el material gentico. Expertos en ciencias, ingeniera, medicina, salud e industria trabajan con ciertas organizaciones para desarrollar estndares para una exposicin segura a la energa de RF. Estos estndares indican los niveles recomendados de exposicin a radiofrecuencia, tanto para los trabajadores como para el pblico en general. Estos niveles de exposicin a radiofrecuencia incluyen mrgenes de proteccin bastante amplios. Todos los radios bidireccionales de Motorola han sido diseados, fabricados y probados para garantizar que cumplan con los niveles de exposicin a radiofrecuencia establecidos por el gobierno. Adems, los fabricantes recomiendan instrucciones de funcionamiento especficas para los usuarios de radios bidireccionales. Estas instrucciones son relevantes, ya que informan al usuario acerca de la exposicin a la energa de RF y ofrecen procedimientos sencillos para controlar dicha energa. Espaol Latinoamericano 44 6881095C98-J_SafetyP.book Page 45 Tuesday, May 21, 2013 2:35 PM Consulte los siguientes sitios web para obtener informacin adicional acerca de la exposicin a la energa de RF y de cmo controlarla para garantizar el cumplimiento de los lmites de exposicin establecidos:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/

www.motorolasolutions.com/rfhealth Regulaciones de la Comisin Federal de Comunicaciones (FCC) Cuando los radios bidireccionales se usan para trabajar, la FCC indica que los usuarios deben conocer su nivel de exposicin y tener la capacidad de controlarla, a fin de cumplir los requisitos de uso profesional. El conocimiento del nivel de exposicin puede proporcionarse mediante el uso de una etiqueta de producto que muestre al usuario informacin de conocimiento especfica para los usuarios. El radio bidireccional de Motorola tiene una etiqueta de producto de exposicin a RF. Asimismo, el manual de usuario de Motorola y el folleto de seguridad que viene aparte incluyen la informacin y las directrices de funcionamiento necesarias para controlar la exposicin de RF y cumplir con los requisitos. Cumplimiento de los estndares de exposicin a RF El radio bidireccional de Motorola est diseado y probado de manera tal que cumple con varios estndares y lineamientos nacionales e internacionales

(enumerados ms adelante) en materia de exposicin humana a la energa electromagntica de radiofrecuencia. Este radio cumple con los lmites de exposicin del IEEE (FCC) y de la ICNIRP para ambientes controlados o de uso profesional con exposicin a radiofrecuencia con factores de funcionamiento de hasta un 50 % de habla y 50 % de escucha, y ha sido aprobado para uso profesional. En cuanto a la medicin de la energa de RF para el cumplimiento de estos lineamientos de exposicin, el radio genera energa de RF que puede medirse, solamente mientras realiza una transmisin (cuando el usuario habla), no al efectuar la recepcin (escucha) ni en modo de espera. 45 Espaol Latinoamericano 6881095C98-J_SafetyP.book Page 46 Tuesday, May 21, 2013 2:35 PM NOTA: Las bateras aprobadas que se entregan con el radio estn clasificadas para un factor de funcionamiento de 5-5-90 (5 % de habla, 5 % de escucha y 90 % en espera) a pesar de que el radio cumpla con los lmites de exposicin en uso profesional de la FCC y pueden funcionar con factores de funcionamiento de hasta un 50 % de habla. El radio bidireccional de Motorola cumple con los siguientes lineamientos y estndares de exposicin a energa de RF:

Comisin Federal de Comunicaciones (FCC, Federal Communications Commission) de los Estados Unidos, Cdigo de Regulaciones Federales;

CFR 47 y ss. FCC, Boletn de OET 65 Instituto de Ingenieros Elctricos y Electrnicos (IEEE, Institute of Electrical and Electronics Engineers) C95.1 Comisin Internacional contra las Radiaciones No Ionizantes (ICNIRP, International Commission of Non-Ionizing Radiation Protection) Cdigo de seguridad 6 del Ministerio de Salud (Canad) y RSS-102 del Ministerio de Industria de Canad Estndar de radiocomunicaciones de la entidad de comunicaciones australiana y ss. ANATEL, Anexo a Resolucin No. 303 y ss. Cumplimiento de exposicin a radiofrecuencia (RF) y lineamientos de control e instrucciones de funcionamiento para radios bidireccionales Para controlar su nivel de exposicin y garantizar el cumplimiento de los lmites de exposicin a ambientes controlados o de uso profesional, siga siempre los procedimientos siguientes. NO retire la etiqueta de exposicin a radiofrecuencia del dispositivo. Los lineamientos referentes al uso seguro por parte del usuario deberan entregarse junto con el dispositivo cuando se transfiera a otros usuarios. Espaol Latinoamericano 46 6881095C98-J_SafetyP.book Page 47 Tuesday, May 21, 2013 2:35 PM Funcionamiento del radio bidireccional. No transmita ms all del factor de funcionamiento normal del 50 % del tiempo. Para transmitir (hablar), presione el botn PTT (pulsar para hablar). Para recibir llamadas, suelte el botn PTT. El botn PTT puede estar en el radio o puede encontrarse en los accesorios con cable o inalmbricos aprobados (por ejemplo, un botn PTT remoto con Bluetooth). La transmisin del 50 % del tiempo, o menos, es importante, porque este radio genera una exposicin a la energa de radiofrecuencia que solamente se puede medir durante la transmisin (en trminos de medicin para el cumplimiento de los estndares). Al frente de la cara. Sostenga el radio en posicin vertical frente a la cara con el micrfono (y las dems partes del radio, incluida la antena) al menos a 2,5 cm (1 pulg.) de distancia de la nariz o los labios. Mantener el radio a una distancia adecuada es importante para garantizar el cumplimiento. NOTA: La exposicin a las radiofrecuencias disminuye al aumentar la distancia con la antena. Funcionamiento del equipo ajustado al cuerpo. Siempre que use el radio ajustado al cuerpo, pngalo en un clip, un soporte, un estuche, una funda o un arns para el cuerpo aprobado por Motorola para el producto. El uso de accesorios para llevar el equipo en el cuerpo es importante, porque el uso de accesorios que no estn aprobados por Motorola puede causar que nivel de exposicin supere los lmites de exposicin a radiofrecuencia en ambientes profesionales/controlados. Use nicamente las antenas de repuesto suministradas o aprobadas por Motorola. El uso de antenas, bateras y accesorios con cable o inalmbricos no autorizados por Motorola puede exceder los lineamientos sobre la exposicin a radiofrecuencia aplicables (IEEE, ICNIRP o FCC). Para obtener una lista de las antenas, bateras y otros accesorios aprobados por Motorola para el modelo de radio, visite el siguiente sitio web:

http://www.motorolasolutions.com/governmentandenterprise 47 Espaol Latinoamericano 6881095C98-J_SafetyP.book Page 48 Tuesday, May 21, 2013 2:35 PM Interferencia/compatibilidad electromagnticas NOTA: Casi todos los dispositivos electrnicos son susceptibles a las interferencias electromagnticas (EMI) si no cuentan con la debida proteccin o si no estn diseados o configurados de manera que sean compatibles con este tipo de seales electromagnticas. Instalaciones Para evitar conflictos de interferencias o de compatibilidad electromagntica, apague el radio en todo sitio donde haya letreros que as lo indiquen. Los hospitales y establecimientos de atencin mdica podran estar usando equipos sensibles a la energa de RF externa. Aviones Cuando est a bordo de un avin, apague el radio cuando se le indique. Si usa el radio, deber hacerlo de conformidad con las regulaciones de la lnea area y las instrucciones de la tripulacin. Dispositivos mdicos Marcapasos La asociacin de tecnologa mdica avanzada (AdvaMed) recomienda mantener una distancia mnima de 15 cm (6 pulg.) entre un radio inalmbrico porttil y un marcapasos. Estas recomendaciones estn en conformidad con las de la Administracin de Drogas y Alimentos de Estados Unidos. Las personas que usen marcapasos deben:

Mantener SIEMPRE el radio a una distancia aproximada de 15 cm (6 pulg.) o ms del marcapasos cuando est ENCENDIDO. No colocar el radio en el bolsillo de una camisa. Utilizar el odo opuesto al marcapasos para minimizar posibles interferencias. APAGAR el radio inmediatamente si cree que se est generando interferencia. Espaol Latinoamericano 48 6881095C98-J_SafetyP.book Page 49 Tuesday, May 21, 2013 2:35 PM Aparatos auditivos Algunos radios inalmbricos digitales pueden interferir con ciertos aparatos auditivos. En caso de que existan interferencias, puede consultar con el fabricante del aparato auditivo para buscar posibles alternativas. Otros dispositivos mdicos Si utiliza cualquier otro dispositivo mdico, consulte con el fabricante del dispositivo para determinar si est protegido adecuadamente contra la energa de RF externa. Su mdico podra ayudarlo a obtener esta informacin. Uso de dispositivos de comunicacin mientras se conduce Consulte siempre las leyes y los reglamentos para el uso de radios en las zonas donde conduce. Preste toda su atencin a la conduccin y al camino. Use la funcin de manos libres, si est disponible. Salga del camino y estacinese antes de realizar o contestar una llamada, si las condiciones de manejo o los reglamentos relacionados as lo exigen. 49 Espaol Latinoamericano 6881095C98-J_SafetyP.book Page 50 Tuesday, May 21, 2013 2:35 PM Seguridad acstica La exposicin a ruidos fuertes de cualquier fuente durante perodos prolongados podra afectar la audicin de manera temporal o permanente. Cuanto ms alto sea el volumen del radio, menos tardar la audicin en verse afectada. En ocasiones, el dao a la audicin provocado por ruidos fuertes es indetectable en un principio y puede tener efecto acumulativo. Para proteger la audicin:

Use el volumen ms bajo necesario para hacer su trabajo. Aumente el volumen solo si se encuentra en un ambiente ruidoso. Reduzca el volumen antes de conectar el audfono o auricular. Limite el tiempo durante el cual usa los auriculares o los audfonos a volumen alto. Al usar el radio sin audfono o auricular, no ponga el altavoz del radio directamente en la oreja. Advertencias sobre el funcionamiento ADVERTENCIA Para vehculos provistos de bolsa de aire (air bag):

Consulte el manual del fabricante del vehculo antes de instalar equipos electrnicos, a fin de evitar la interferencia con el cableado de las bolsas de aire. NO ponga el radio porttil sobre el rea de la bolsa de aire ni sobre la zona de despliegue de esta. Las bolsas de aire se inflan con gran fuerza. Si se pone un radio en la zona de despliegue de la bolsa de aire y esta se infla, es posible que el radio salga disparado con gran fuerza y cause lesiones graves a los ocupantes del vehculo. Espaol Latinoamericano 50 6881095C98-J_SafetyP.book Page 51 Tuesday, May 21, 2013 2:35 PM Advertencias sobre el funcionamiento (continuacin) ADVERTENCIA Atmsferas potencialmente explosivas

(El trmino atmsferas explosivas se refiere a lugares clasificados como peligrosos que pueden contener gases, vapores o polvos peligrosos). Apague el radio antes de ingresar a un rea con una atmsfera potencialmente explosiva, a menos que el tipo de radio haya sido clasificado especficamente para el uso en tales reas como Intrnsecamente seguro (por ejemplo, aprobado por Factory Mutual, CSA, UL o CENELEC). NO retire, instale ni cargue bateras en estas reas. Las chispas en ambientes potencialmente explosivos pueden desencadenar una explosin o un incendio, y ocasionar lesiones o incluso la muerte. Entre los ambientes potencialmente explosivos mencionados anteriormente, se encuentran las reas con combustible, por ejemplo, debajo de la cubierta de barcos; instalaciones de transferencia y almacenamiento de combustible y productos qumicos; reas donde el aire contiene productos qumicos o partculas tales como granos, polvos o polvos metlicos. En las reas con atmsferas potencialmente explosivas hay generalmente seales de precaucin, aunque no siempre es as. Detonadores y reas de explosivos Para evitar posibles interferencias con operaciones de voladuras, apague el radio cuando se encuentre cerca de los detonadores, en un rea de explosivos o en reas donde se encuentre el siguiente aviso: Apague la radio bidireccional. Respete todos los carteles e instrucciones. 51 Espaol Latinoamericano 6881095C98-J_SafetyP.book Page 52 Tuesday, May 21, 2013 2:35 PM Precauciones sobre el funcionamiento Precaucin Antenas NO use ningn radio porttil que tenga la antena daada. Si una antena daada toca la piel, puede causar una pequea quemadura. Bateras Todas las bateras pueden causar daos materiales, lesiones o quemaduras si un material conductor, por ejemplo, joyas, llaves o cadenas, hace contacto con los terminales expuestos. El material conductor podra cerrar un circuito elctrico (cortocircuito) y tornarse muy caliente. Manipule con cuidado las bateras cargadas, especialmente cuando las lleve dentro de un bolsillo, bolso o en algn otro contenedor con objetos metlicos. Informacin del radio intrnsecamente seguro La unidad con aprobacin de intrnsecamente seguro hace referencia a un producto que ha sido aprobado como intrnsecamente seguro por parte de un organismo de aprobacin (por ejemplo, FM Approvals, CSA, UL o Cenelec) y certifica que un producto determinado cumple con los estndares de intrnsecamente seguro correspondientes de dicho organismo para tipos especficos de lugares clasificados como peligrosos. Los radios porttiles que han recibido aprobacin de intrnsecamente seguros tendrn una etiqueta de aprobacin adherida para identificar la unidad como aprobada para determinadas atmsferas peligrosas. Esta etiqueta especifica la clase, la divisin o el grupo de peligro junto con el nmero de pieza de la batera que se debe usar. La etiqueta de aprobacin de intrnsecamente seguro se encontrar sobre la unidad de radio porttil. Espaol Latinoamericano 52 6881095C98-J_SafetyP.book Page 53 Tuesday, May 21, 2013 2:35 PM Precauciones de funcionamiento para equipos intrnsecamente seguros Precaucin NO haga funcionar el equipo para comunicaciones de radio en atmsferas peligrosas, a menos que se trate de un tipo especialmente calificado (por ejemplo, aprobado por FM, UL, CSA o CENELEC). Podra producirse un incendio o una explosin. NO haga funcionar una unidad de radio que haya sido aprobada como producto intrnsecamente seguro en atmsferas peligrosas si presenta daos fsicos (por ejemplo, si la cubierta est quebrada). Podra producirse un incendio o una explosin. NO reemplace ni cargue las bateras en una atmsfera peligrosa. Mientras se instalan o se quitan las bateras, pueden producirse chispas en el contacto que provoquen una explosin o un incendio. Advertencias para los radios aprobados como intrnsecamente seguros Los radios deben enviarse desde las instalaciones de fabricacin de Motorola con la capacidad para atmsferas peligrosas y con la etiqueta que indica que est aprobado como intrnsecamente seguro (FM, UL, CSA, CENELEC). Una vez que se hayan enviado los radios a terreno, no se actualizarn para alcanzar la capacidad ni se los etiquetar. Las modificaciones cambian la configuracin del diseo original del hardware de la unidad. Solo el fabricante del producto original puede realizar modificaciones. 53 Espaol Latinoamericano 6881095C98-J_SafetyP.book Page 54 Tuesday, May 21, 2013 2:35 PM ADVERTENCIA NO reemplace ni cambie los accesorios en una atmsfera peligrosa. Mientras se instalan o se quitan los accesorios, pueden producirse chispas en el contacto que provoquen una explosin o un incendio. Apague el radio antes de quitar o instalar una batera o un accesorio. NO desarme un producto intrnsecamente seguro de ninguna manera que exponga los circuitos internos de la unidad. Si no se usan bateras aprobadas como intrnsecamente seguras o accesorios aprobados especficamente para la unidad de radio, puede provocar una condicin de inseguridad peligrosa en la que se usa una combinacin de radio no aprobada para lugares peligrosos. La modificacin no autorizada o incorrecta de un producto aprobado como intrnsecamente seguro anular la calificacin de aprobacin del producto. La reparacin incorrecta o el cambio de etiqueta de cualquier radio aprobado por un organismo como dispositivo intrnsecamente seguro pueden afectar de manera negativa la calificacin de aprobacin de la unidad. El uso de un radio que no sea intrnsecamente seguro en una atmsfera peligrosa puede provocar lesiones graves o la muerte. Reparacin ADVERTENCIA LAS REPARACIONES DE LOS PRODUCTOS MOTOROLA INTRNSECAMENTE SEGUROS SON RESPONSABILIDAD DEL USUARIO. Las reparaciones de un producto de radio de Motorola aprobado por FM deben realizarse en instalaciones auditadas por FM de conformidad con el estndar de reparaciones y servicio 3605 de FM. Pngase en contacto con Motorola para solicitar asistencia relacionada con las reparaciones y las tareas de servicio de los equipos Motorola intrnsecamente seguros. Espaol Latinoamericano 54 6881095C98-J_SafetyP.book Page 55 Tuesday, May 21, 2013 2:35 PM Una reparacin consta de algo hecho en el interior de la unidad que debe devolverla a su estado original. Las instancias que no se consideran reparaciones son las que incluyen una accin realizada en una unidad que no requiere que la cubierta externa se abra de manera tal que queden expuestos los circuitos elctricos de la unidad. No sustituya los elementos opcionales ni accesorios Los equipos para comunicaciones Motorola que cuentan con un certificado de intrnsecamente seguros emitido por un organismo de aprobacin (FM, UL, CSA, CENELEC) son probados como sistemas completos que incluyen: el dispositivo porttil aprobado, la batera aprobada y los accesorios u opciones aprobados, o ambos. Debe respetar de manera estricta esta combinacin de dispositivo porttil y batera aprobados. No deben sustituirse los elementos, aun si la pieza de sustitucin ha sido aprobada con anterioridad para otro equipo de comunicaciones Motorola. Las configuraciones aprobadas son detalladas por el organismo de aprobacin (FM, UL, CSA, CENELEC). La etiqueta de aprobacin como intrnsecamente seguro adherida al radio indica la clasificacin de intrnsecamente seguro de ese radio e indica las bateras aprobadas que pueden usarse con el sistema. La etiqueta de aprobacin de intrnsecamente seguro adherida al radio hace referencia a un nmero de pieza manual que indica los accesorios o las opciones que han sido aprobados para su uso con el radio porttil. El uso de una batera o un accesorio aprobados como intrnsecamente seguros que no sean de Motorola con el radio Motorola aprobado anular la aprobacin de intrnsecamente seguro de esa unidad de radio. 55 Espaol Latinoamericano 6881095C98-J_SafetyP.book Page 56 Tuesday, May 21, 2013 2:35 PM Notas:

Espaol Latinoamericano 56