all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.71 MiB | / October 12 2001 | |||
1 | Test Report | / October 12 2001 | ||||||
1 | Test Report | / October 12 2001 | ||||||
1 | Test Report | / October 12 2001 | ||||||
1 | ID Label/Location Info | / October 12 2001 | ||||||
1 | Attestation Statements | / October 12 2001 | ||||||
1 | Cover Letter(s) | / October 12 2001 | ||||||
1 | RF Exposure Info | May 12 2001 / October 12 2001 | ||||||
1 | RF Exposure Info | May 12 2001 / October 12 2001 | ||||||
1 | RF Exposure Info | May 12 2001 / October 12 2001 | ||||||
1 | Cover Letter(s) | / October 12 2001 | ||||||
1 | External Photos | / October 12 2001 | ||||||
1 | ID Label/Location Info | / October 12 2001 | ||||||
1 | Internal Photos | / October 12 2001 | ||||||
1 | Operational Description | / October 12 2001 | ||||||
1 | RF Exposure Info | / October 12 2001 | ||||||
1 | Cover Letter(s) | / October 12 2001 | ||||||
1 | Test Report | / October 12 2001 | ||||||
1 | Test Setup Photos | / October 12 2001 | ||||||
1 | RF Exposure Info | / October 12 2001 |
1 | User Manual | Users Manual | 2.71 MiB | / October 12 2001 |
6881038B80.book Page 1 Thursday, August 30, 2001 5:33 PM User's Guide I Y R A N M L E R P I
@6864110R04@
6864110R04-O TWO-WAY RADIO Models XU1100, XU2100, and XU2600 Models XV1100, XV2100, and XV2600 010449-O 6881038B80.book Page 2 Thursday, August 30, 2001 5:33 PM 6881038B80.book Page i Thursday, August 30, 2001 5:33 PM I Important Information on Safe and Efficient Operation Read This Information Before Using Your Radio The information provided in this document supersedes the general safety information contained in user guides published prior to July 2000. For information regarding radio use in a hazardous atmosphere please refer to the Factory Mutual
(FM) Approval Manual Supplement or Instruction Card, which is included with radio models that offer this capability. RF Operational Characteristics Your radio contains a transmitter and a receiver. When it is ON, it receives and transmits radio frequency (RF) energy. The XTN Series VHF radios operate in the frequency range of 151-161 MHz, the XTN Series UHF radios operate in the frequency range of 461-469 MHz. When you communicate with XU1100 or XV1100 radios the output power level is 1.0 watt, with other XTN Series radios, the output power level is 2.0 watts Exposure to Radio Frequency Energy Your Motorola radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:
United States Federal Communications Commission, Code of Federal YSafety and General Information R A N M L E R P Electronic Engineers (IEEE) C95. 1-1992 Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
American National Standards Institute (ANSI) / Institute of Electrical and Regulations; 47 CFR part 2 sub-part J I
n o i t a m r o f n I l a r e n e G d n a y t e f a S i 6881038B80.book Page ii Thursday, August 30, 2001 5:33 PM n o i t a m r o f n I l Frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 United States, Report 86, 1986 International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio
Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 1999 (applicable to wireless phones only) Y National Council on Radiation Protection and Measurements (NCRP) of the R A N M L E R ii P To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above I standards, always adhere to the following procedures:
Portable Radio Operation and EME Exposure Antenna Care Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio and may violate I FCC regulations. DO NOT hold the antenna when the radio is IN USE. Holding the antenna affects the effective range. Two-Way Radio Operation When using your radio as a traditional two-way radio, hold the radio in a vertical position with the microphone two to three inches (5. 0 to 7.5 cm) away from the lips. a r e n e G d n a y t e f a S 6881038B80.book Page iii Thursday, August 30, 2001 5:33 PM To maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in a Motorola supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC RF exposure guidelines. If you do not use a body-worn accessory, ensure the radio and its antenna is at least one inch (2.5 cm) from your body when transmitting. Data Operation When using any data feature of a device, with or without an accessory cable, position the device and its antenna at least one inch (2.5 cm) from the body. Approved Accessories For a list of approved Motorola accessories refer to the Two-Way Radio section of www.motorola.com/store. Electromagnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference
(EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Aircraft When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. I YBody-Worn Operation R A N M L E R P I n o i t a m r o f n I l a r e n e G d n a y t e f a S iii 6881038B80.book Page iv Thursday, August 30, 2001 5:33 PM Pacemakers The Advanced Medical Technology Association recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of the U.S. Food and Drug Administration. Persons with pacemakers should:
ALWAYS keep the radio more than six inches (15 centimeters) from their pacemaker when the radio is turned ON.
not carry the radio in the breast pocket. I
use the ear opposite the pacemaker to minimize the potential for interference.
turn the radio OFF immediately if you have any reason to suspect that interference is taking place. Hearing Aids I Some wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. n o i t a m r o f n I l YMedical Devices R A N M L E R iv P a r e n e G d n a y t e f a S 6881038B80.book Page v Thursday, August 30, 2001 5:33 PM Check the laws and regulations on the use of radios in the area where you drive. Always obey them. When using your radio while driving, please:
Give full attention to driving and to the road.
Use hands-free operation, if available.
Pull off the road and park before making or answering a call if driving conditions so require. I YSafety and General Use While Driving R A N M L E R P I Operational Warnings For Vehicles with an Air Bag Do not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. Potentially Explosive Atmospheres Turn off your radio prior to entering any area with a potentially explosive atmosphere, unless it is a radio type especially qualified for use in such areas as Intrinsically Safe. Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. n o i t a m r o f n I l a r e n e G d n a y t e f a S v 6881038B80.book Page vi Thursday, August 30, 2001 5:33 PM n o i t a m r o f n I l To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: Turn off two-
way radio. Obey all signs and instructions. Operational Cautions Antennas Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury such as burns if a I conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. Charging Safety Instructions I Before using the battery charger, read all instructions and cautionary markings on:
1. 2. 3. Caution: To reduce the risk of injury, charge only the rechargeable battery. Other types of batteries may burst, causing personal injury and damage. YBlasting Caps and Areas R A N M L E R vi P the battery the battery charger, and the radio using the battery. a r e n e G d n a y t e f a S 6881038B80.book Page vii Thursday, August 30, 2001 5:33 PM 1. Do not expose the charger to rain or snow. 2. Do not operate the charger if it has received a sharp blow, or has been dropped 3. Do not disassemble the charger if it has received a sharp blow, or has been or damaged in any way. dropped or damaged in any way. 4. Never alter the AC cord or plug provided with the unit. If plug will not fit the out-
let, have proper outlet installed by a qualified electrician. An improper condition can result in a risk of electric shock. 5. To reduce risk of damage to cord or plug, pull the plug rather than the cord when disconnecting charger from AC receptacle. 6. To reduce the risk of electric shock, unplug the charger from the outlet before 7. Use of an attachment not recommended or sold by Motorola may result in a risk attempting any maintenance or cleaning. of fire, electric shock, or personal injury. 8. Make sure that the cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress. I YSave these Instructions R A N M L E R P I n o i t a m r o f n I l a r e n e G d n a y t e f a S vii 6881038B80.book Page viii Thursday, August 30, 2001 5:33 PM
n o i t a m r o f n I l Motorola Product Services at:
10. The supply cord of this charger cannot be replaced. If the cord is damaged, call improper extension cord could result in a risk of fire and/or electric shock. If an extension cord must be used, make sure:
I 1-800-353-2729 (U.S.A.) 1-888-390-6456 TTY (Text Telephone) 1-888-390-6456 TTY (Text Telephone) That the pins on the plug of the extension cord are the same number, size and shape as those on the plug of the charger. That the extension cord is properly wired and in good electrical condition, and That the cord size is18 AWG for lengths up to 100 feet, and 16 AWG for lengths up to 150 feet. Y9. An extension cord should not be used unless absolutely necessary. Use of an R A N M L E R viii P a r e n e G d n a y t e f a S 1-800-461-4575 (Canada) I 6881038B80.book Page -1 Thursday, August 30, 2001 5:33 PM I Y Introduction Thank you for purchasing a R Motorola XTN Series Radio. Your radio is a product of Motorolas A 70 plus years of experience as a world leader in the designing and manufacturing of communications N equipment. The revised industrial design reflects the heritage and ruggedness of the XTN Series. The XTN Series radios provide cost-
effective communications for M businesses such as retail stores, restaurants, schools, construction sites and more. Motorola professional two-way radios are the L perfect communications solution for all of todays fast-paced industries. Note: Please read this manual E R P Motorola Consumer Products Division 1705 Belle Meade Court Lawrenceville, GA 30043 carefully to ensure you know how to properly operate the radio before use. I Package Contents
Radio
Swivel Belt Holster
NiMH Battery NTN8971
10-Hour Charger NNTN4021
User's Guide
Accessory Brochure
Warranty Card Motorola, the Stylized M Logo, and all other trademarks indicated as such herein are Trademarks of Motorola, Inc. Reg. U.S. Pat. & Tm. Off. 2001 Motorola, Inc. All rights reserved. Printed in the U.S.A. 08/01 For a copy of a large-print version of this guide, or for product-related questions, please contact:
1-800-353-2729 U.S.A. 1-800-461-4575 Canada 1-888-390-6456 TTY (Text Telephone) On the web, please refer to:
www.motorola.com/radios/professional n o i t c u d o r t n I
-1 6881038B80.book Page 0 Thursday, August 30, 2001 5:33 PM Getting Started . 3 Turning On/Off Your Radio . 3 Installing Batteries . 4 Charging . 7 Programming Mode . 9 Channel . 10 Frequency . 10 Interference Eliminator Code . 11 Eavesdrop Reducer . 11 Bandwidth . 12 Manager Lockout . 12 Assigning Channels to Presets . 12 Cloning . 13 Resetting Factory Defaults . 13 Settings and Functions Display 14 Operating Radio . 15 Signal Strength Indicator . 15 Monitor Signal Strength Indicator . 15 Setting the I Y Contents R A N M L E R P I s t n e t n o C s t n e t n o C 0 User Menu Features . 16 Setting Call Tone . 16 Setting Microphone Gain . 16 Hands-Free Use/VOX . 17 Setting Preferences for Scanning. 19 Setting the Battery Type* . 20 End-of-Transmission Tone . 20 Keypad Tones . 21 Use and Care . 22 Frequency and Code Charts . 23 VHF Frequency Chart . 23 UHF Frequency Chart . 24 Interference Eliminator Codes . 25 Digital Private Line/DPL Codes . 26 Troubleshooting . 27 Motorola Limited Warranty . 30 6881038B80.book Page 1 Thursday, August 30, 2001 5:33 PM Faxed I contact the Fax-On-
Demand system at:
To have the FCC forms please request document 000601 which includes all forms and instructions. If you wish to have the document faxed, mailed or have questions, please use the following contact information. Y FCC Licensing Information R XTN Series professional two-way radios operate on radio frequencies that are regulated by the Federal Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC. A Application is made on FCC Form 601 and Schedules D, E and G. N M L E R P For questions on determining your radio frequency, please call Motorola Product Services at:
Before filling out your application, you must decide which frequency(ies) you can operate on. See the Frequency and Code Charts on page 23. contact the FCC at:
1-888-CALL-FCC 1-888-225-5322 1-800-418-FORM 1-800-418-3676 regarding FCC license Or: http://www.fcc.gov call the FCC forms 1-800-448-6686 1-202-418-0177 Questions I hotline at:
Mailed FCC n o i t a m r o f n I g n i s n e c L C C F i 1 6881038B80.book Page 2 Thursday, August 30, 2001 5:33 PM Changes or modifications not expressly approved by Motorola may void the users authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. Note: Use of this radio outside the country where it was intended to be distributed I is subject to government regulations and may be prohibited. FCC Y R A N M L E R 2 P n o i t a m r o f n I g n i s n e c L C C F I i 6881038B80.book Page 3 Thursday, August 30, 2001 5:33 PM P Display Normal Menu Mode Turn knob on the top of the radio clockwise to turn the radio On. Turn the Knob counterclockwise to turn the radio Off. The radio chirps and the display will briefly show all features and display segments of your radio. Y Getting Started R Turning On/Off Your Radio Turn knob A N k 1 I M L E A Diagram of your New XTN Series Radio and its Functions can be found on page 8. Volume R You can set the volume by adjusting the knob on the top of the radio; P. Note: Do not hold the radio too close to your ear when the volume is at a high setting. P Then, the code area will briefly display the current Channel
(larger number located in the center of the display) and the Frequency assigned to that Channel. The Interference Eliminator Code shows briefly. Current Channel will be left on display. I d e t r a t S g n i t t e G X 3 Ribbed Latch 6881038B80.book Page 4 Thursday, August 30, 2001 5:33 PM Installing Batteries The Nickel-Metal Hydride Battery
Push the Ribbed Latch on the bottom of the radio away from the battery door, or toward the contacts.
Slide and lift the battery door off.
Place the battery so that the charge I contacts are facing out toward the battery door. Insert the top of the battery into the radio and push the battery up and into the battery compartment. The battery fits tightly into place.
Slide and snap the battery door into Y R A N M L E R X 4 P d e t r a t S g n i t t e G I place. Note: *Based upon 5/5/90 duty cycle. 6881038B80.book Page 5 Thursday, August 30, 2001 5:33 PM away from the battery door.
Slide and lift the battery door off. the compartment. I
Slide and snap the battery door into place.
Place AA batteries matching the markings in
Push the ribbed latch on the bottom of the radio AA Alkaline Batteries Your radio can also use 4 AA batteries; alkaline cells provide 24 hours* of radio use. Y R A N M L Full E d When the battery meter Flashes; m, the radio chirps after releasing Mand every R 10 minutes. Note: *Based upon 5/5/90 duty cycle. P Battery Meter The battery meter located in the upper left hand corner of the display indicates how much battery power you have remaining. Battery Meter flashes when almost empty. Two-thirds Full One-third Full I m b c d e t r a t S g n i t t e G X 5 6881038B80.book Page 6 Thursday, August 30, 2001 5:33 PM Diagram of your New XTN Series Radio and its Functions I Transmit call tone Use M to:
Talk Exit a menu Indicator Light:
Use B to:
Y R A N M L Use T / S buttons to:
E R X 6 P Scroll through menus Lock the keypad Use \ button to:
Access Presets
(XU2600, XV2600) d e t r a t S g n i t t e G Microphone:
I Use P (Power) to:
Turn power On/Off Adjust radio volume Accessory Jack Audio Accessories Radio Plug-in Charging Use J button to:
Turn Scan On/Off
(XU2600, XV2600) Monitor the Frequency Use [ and ] to:
Change Channels
(XU2600, XV2600) Scroll through menu settings Speaker:
6881038B80.book Page 7 Thursday, August 30, 2001 5:33 PM Charging The NiMH Battery with 10-Hour Charger
Make sure the radio is Off.
Lift Accessory Cover and plug the 10-Hour Charger (NNTN4021) firmly into the lower jack (small hole). Please see figure.
Plug the charger into an electric outlet. The light on the charger will glow red if charging properly. Note: Charge the battery (NTN8971) overnight (16 hours) before using it for the first time, it will only need up to ten hours of charging thereafter. For optimum battery life, the battery must not be left charging for prolonged periods after reaching full charge. Charging the battery over the weekend is acceptable. If radio is On while charging, additional time is required to charge the battery. I Y R A N M L E R P I Light d e t r a t S g n i t t e G X 7 6881038B80.book Page 8 Thursday, August 30, 2001 5:33 PM With Drop-in Charging Tray ( Not included with all models) The Drop-in Charging Tray can be placed on any flat surface and provides drop-in charging convenience.
Connect 10-Hour Charger (NNTN4021) Y R A N M L E R X 8 P d e t r a t S g n i t t e G and Drop-in Charging Tray* (NNTN4019) by inserting plug into the rear of Drop-in Charging Tray. Drop-in Charging Tray with the radio facing toward you.
To charge the radio, place into the I Note: The battery can be charged while inside the radio or removed from the radio and placed in Drop-in Charging Tray separately. The batterys contacts must face down and the Motorola Logo must face the front of Charger. I The light on the 10-Hour Charger will glow continuously when radio/battery is inserted. Note: Allow 10 hours for the battery to reach full charge.
* Accessory Number for Drop-in Charger is 53872. 10-Hour Charger NNTN4021 Drop-in Charging Tray NNTN401 6881038B80.book Page 9 Thursday, August 30, 2001 5:33 PM 4. Eavesdrop Reducer/Scrambling Code (Codes that make your transmissions providing you with a choice of code combinations.) Please refer to the Frequency and Code Charts on page 23. sound garbled to anyone listening who is not set to that specific code). Please I refer to Setting Eavesdrop Reducer (2 watt models only) can be found on page 11. Y Programming Mode R To talk with someone on your two-way radios, the following features need to be set exactly alike:
1. Channel (Current channel that the radio is using.) A 2. Frequency (The frequency wave your radio uses to transmit/receive.) 3. Interference Eliminator Code (These codes help minimize interference by N M Channel Frequency, Interference Eliminator Code, Eavesdrop Reducer/Scrambling L Code, and Manager Lock can all be selected in Programming Mode: k.
Access k by turning the radio on while holding the M and J buttons for E
The Programming icon; k illuminates and radio chirps to indicate access.
Exit k by holding the M for three seconds. R Note: k does not timeout. P Accessory) can help to duplicate radio settings easily for multiple radio use. Please refer to Cloning on page 13. Note: The Cloning Feature used with the Multi-unit Charger/MUC (Optional three seconds. I k i e d o M g n m m a r g o r P 9 6881038B80.book Page 10 Thursday, August 30, 2001 5:33 PM Press Display Then Press
[ or ] to select the feature. Press M for three seconds to exit programming mode. k Now, you may use your radios \ and [ or ] to select features. k
\ the icon representing the feature you want Y R A N Setting the Channel (X2600 and XV2600 only)
Make sure k is accessed. Please refer to Programming I M
The channel number flashes. l and Code will display
Press [ or ] until the desired channel is selected. I Setting the Frequency L
Press \ once, l indicator illuminates and the E
Press [ or ] to choose desired Frequency.
Exit the Programming Mode by holding down M. R 10 P Mode on page 9. alternately. e d o M g n m m a r g o r P Frequency flashes. i 6 6881038B80.book Page 11 Thursday, August 30, 2001 5:33 PM to flash. I Y Setting the Interference Eliminator Code The Interference Eliminator Code helps minimize interference by providing you with R a choice of code combinations. Make sure k is accessed. Please refer to Programming Mode on page 9. A
To set the code, press \ until the code number display begins
Then press [ or ] to choose the code. N Note: To hear everyone on your frequency, select Interference Eliminator Code 0. Setting Eavesdrop Reducer (2 watt models only) M Note: All the radios have to be set to the same Eavesdrop Reducer for transmission L
Make sure k is accessed. Please refer to Programming Mode on page 9.
Press \ as needed until e is displayed, then E
Press [ or ] to choose the scramble code.
Select code 1, 2, or 3. Factory Default is set at 0 (Off). R When you exit k, radio displays e. P Your radio has the Eavesdrop Reducer feature, a scramble code that makes your transmissions sound garbled to anyone listening without the same code. It doesnt guarantee confidentiality, but it adds an extra layer of privacy. I to be clear. e k i e d o M g n m m a r g o r P 11 6881038B80.book Page 12 Thursday, August 30, 2001 5:33 PM K C k Setting Bandwidth (when FCC allowable) k Bandwidth is only selectable when flashing. Either "HI" (high: 25.0 kHz) or "Lo" (low: 12.5 kHz) will display. Y Make sure k is accessed. Please refer to Programming Mode on page 9. R
Change the setting by pushing the \ until b displays.
Press [ or ] to select setting:
A N Setting Manager Lockout This feature aids in preventing changing of radio settings. All buttons except M and B, will be unaccessible when Y is chosen.
Make sure k is accessed. Please refer to Programming Mode on page 9. I M
To turn lock on, press \ until f displays.
Press [ or ] to select setting, Y or n.
Once turned on, f icon displays after exiting k. I L Assigning Channels to Presets
Make sure k is accessed. Please refer to Programming Mode on page 9.
Press [ or ] to choose desired Channel. E
Press and hold T or S to assign a Channel to that preset button, radio beeps R 12 P Note: All of the Channel settings are assigned to that preset button. e d o M g n m m a r g o r P to confirm. n i 6881038B80.book Page 13 Thursday, August 30, 2001 5:33 PM
Either p for pass or f for fail shall appear on the display.
Only the source radio needs to be in Clone Mode, and both Y Cloning The XTN Series radios have cloning capability when connected via the Multi Unit R Charger (MUC). Cloning enables rapid fleet reconfiguration because all selectable settings are sent to the target unit. The target radios must be placed behind the A source radio, please refer to the MUC instructions included with this accessory.
Make sure k is accessed. Please refer to Programming Mode on page 9. N
The source radio enters Cloning Mode through an extended press of J. Pressing J again, will clone additional radios. I M Resetting Factory Defaults All selectable features can be reset to factory defaults by turning the radio on while holding M and \ buttons simultaneously for five seconds. L Note: The radio cannot be reset if Manager Lockout is enabled. E R P radios will indicate if cloning was successful. I k i e d o M g n m m a r g o r P 13 6881038B80.book Page 14 Thursday, August 30, 2001 5:33 PM l Channel Programming Mode Frequency Indicator Scan Battery Meter Frequency Setting and Interference Eliminator Code Manager Lockout/User Lock Eavesdrop Reducer Signal Strength y a p s i D s n o i t c n u F d n a s g n i t t e S k Settings and Functions Display k Y R A N The following table lists the functions you can set by pressing and holding a button I while you are turning on your radio. M Key(s) Pressed. MJ P = k Access k Programming Mode: Five second delay. I L M\ P + ) + Reset factory settings: Five second delay. Will not work if Manager Lock is enabled. E Enable g VOX. M P Turns End-of-Transmission Tone On/Off.
] P R Radio default setting is Off. Turns Keypad Tones On/Off.
[ P 14 P Radio default setting is On. You can change the channel here. Function VOX 6881038B80.book Page 15 Thursday, August 30, 2001 5:33 PM I when radio is On and is steady red when transmitting. Y Operating Radio R Check channel activity by pressing monitor button. You will hear static if the channel is clear to use. Do not transmit if someone is speaking on the channel.
Press and hold M. and speak into radio. A Note: To maximize clarity hold radio two-to-three inches away from mouth.)
To listen for messages, release M. Note: The transmit light on the front left of the radio flashes every three seconds N Signal Strength Indicator The radio will display w when there is activity on the frequency. M When receiving the display will show w and a signal strength of 1 (weakest) through 6 (strongest) . This can help to determine when a radio is moving out of range. Monitor Signal Strength Indicator L To check for channel activity, press and hold the J button. Youll hear static if the channel is clear and w 0 will display. Press J E to release. To avoid interrupted conversation, wait until the channel is clear or switch to another channel. R Note: Obstacles that block the signal path may affect the strength of the incoming P I signal. i o d a R g n i t a r e p O X 15 6881038B80.book Page 16 Thursday, August 30, 2001 5:33 PM Y User Menu Features R Setting Call Tone Your radio can transmit call tones to other radios in your group so you can alert the group that you want to talk to them. There are three distinct individual call tones to A choose or you can choose to turn Call Tones off: 0. Once selected, just press B to transmit the Call Tone to others.
To set your call tone, press \ as needed to display E. N
You can press [ or ] to scroll through the available call tones. The radio plays each individual Call tone as you scroll through. I Note: The default is set on 0, or you may choose 1, 2, or 3. M Setting Microphone Gain Microphone Gain allows compensation for background noise and enhances the I ability to pick up quiet voices.
To set sensitivity level, press \ as needed, until g and ? are L visible.
Select 1, 2 or 3 by using [ or ]:
E 3 = High Sensitivity 2 = Medium Sensitivity 1 = Low Sensitivity R X 16 P s e r u t a e F u n e M r e s U
6881038B80.book Page 17 Thursday, August 30, 2001 5:33 PM Hands-Free Use/VOX VOX allows hands-free transmission when used with compatible VOX accessories.
Turn radio Off.
Open Accessory Cover.
Insert plug of audio accessory firmly into Accessory Jack.
Turn radio On and lower volume before placing accessory on head or in ear. receive, stop talking. I
To transmit, speak into Accessory Microphone and to Y R A N Setting VOX Sensitivity Level M The default VOX sensitivity level must be changed for initial use. The g will flash if sensitivity is set to 0.
Press \ as needed to display g and H. I
Select Sensitivity Level of 1, 2, or 3 by using L
[ or ]:
3 = High Sensitivity 2 = Medium Sensitivity E 1 = Low Sensitivity R P s e r u t a e F u n e M r e s U X 17 6881038B80.book Page 18 Thursday, August 30, 2001 5:33 PM H 3 radios/professional. Y Note: To order accessories, please refer to: www.motorola.com/
R
VOX operation can be disabled by pressing M.
A short press M of will enable VOX. A XU2600 and XV2600 radios are capable of hands-free use without accessories.
Enable VOX by pressing M while turning the radio On.
Press \ as needed to display g and I. N Setting VOX Sensitivity Level
Select Sensitivity Level of 1, 2, or 3 by using I
[ or ]:
M 3 = High Sensitivity 2 = Medium Sensitivity 1 = Low Sensitivity I To turn VOX Off, simply turn the radio Off and then On again. The g will not be L visible. Press M to turn off VOX and return to normal operation, g will flash. A short press of M will enable VOX. E Note: There is a short delay between when you start talking and the radio R X 18 P s e r u t a e F u n e M transmits. r e s U 6881038B80.book Page 19 Thursday, August 30, 2001 5:33 PM Y Setting Preferences for Scanning/Scan List By using J, you can monitor channels and codes for transmissions and lock in on R a specific channel.
To start scanning, briefly press J. A Your channel/code screen displays h and begins to scroll through channels. When the radio detects channel activity, it stops on that channel and displays its channel and code. You can talk to the person(s) transmitting without having to switch channels by N pressing M.
To stop scanning, briefly press J. I If you press M while the radio is scanning, the radio will transmit on the channel M which was selected before you activated Scan. If no transmission occurs within five seconds, scanning will resume. If you want to scan channels without interference eliminator codes, change the code for your set channel to 0 before you briefly press J. L Nuisance Delete/ Manual Advance While Scanning Note: While scanning you can quickly delete a channel that the radio has loaded for E R P an indefinite period of time by pressing [ once, i.e. shortcut to Scan List Editing. You can also advance to the next channel with activity by manually pressing ]. I s e r u t a e F u n e M r e s U X 19 6881038B80.book Page 20 Thursday, August 30, 2001 5:33 PM setting. code section. that particular channel. Y Editing Scan List Scan List Setting is changed by pressing the \ button three times. R
The flashing channel will appear on the display with a solid Y or n in the A
Press [ or ] button to increase or decrease the channel.
Pressing the Js button toggles between the channel number and Scan List N
The scroll buttons, [ or ] will change the Scan List to include/Y or exclude/n I
Once you have seklected your Scan List options, press M to exit. M Setting the Battery Type*
This feature allows the battery meter to recognize and properly I display the power remaining of single cell batteries. Press \ until d displays. Either A (Alkaline) or n (NiCad, L NiMH, Li-Ion rechargeable AA cells) is flashing.
Press [ or ] until your choice of A or n displays. E Note: *This menu will not appear if the NiMH Battery is in use. R End-of-Transmission Tone X When you turn this feature On, your two-way radio transmits a tone when you finish transmitting. Its like saying Roger or Over. 20 P s e r u t a e F u n e M r e s U A 6881038B80.book Page 21 Thursday, August 30, 2001 5:33 PM
Talking Range
To disable the End-of-Transmission Tone feature, turn your radio Off and then Y If you dont hear the talk confirmation tone, you can enable it by pressing and holding ] as you turn on your radio. R back On while pressing and holding ]. A Keypad Tones Every time you press a button on your radio, it beeps unless you turn this feature off.
Turn your radio On while you press and hold [. N
To turn Keypad Tones back on, turn the radio Off and then back On again while you press and hold [. I M L E R P Model I UHF 2W Up to 250, 000 Sq. Ft. UHF 1W Up to 200, 000 Sq. Ft. VHF 2W Up to 180, 000 Sq. Ft. VHF 1W Up to 150,000 Sq. Ft. obstructions Up to 6 Miles Up to 5 Miles Up to 6 Miles Up to 5 Miles Up to 20 Floors Up to 15 Floors Up to 10 Floors Up to 8 Floors Inside steel/concrete industrial buildings Flat ground with no Inside multi-level Multi-Level Industrial Outdoor buildings s e r u t a e F u n e M r e s U X 21 6881038B80.book Page 22 Thursday, August 30, 2001 5:33 PM Use a soft damp cloth to clean the exterior. I If the radio gets wet... Y Use and Care R A N M L E R X 22 P e r a C d n a I e s U Turn radio Off and remove batteries. XXX XXX Do not immerse in water. Do not use alcohol or cleaning solutions. Dry with soft cloth. Do not use radio until completely dry. 6881038B80.book Page 23 Thursday, August 30, 2001 5:33 PM MHz MHz Position I Bandwidth Bandwidth 25.00 25.00 25.00 25.00 VHF Frequency Chart Position Y Frequency and Code Charts The charts on these pages provide frequency and code information. These charts are R useful when using Motorola XTN Series two-way radios with other business radios. A N M L E R P 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 Note: Due to FCC regulations, 151.6250 151.9550 154.5700 154.6000 151.7000 151.7600 151.8200*
151.8800*
151.9400*
151.5125 151.6550 151.6850 151.7150 151.7450 151.7750 151.8650 151.8950 151.9250 152.7000 154.4900 154.5150 154.5275 154.5400 154.6000 154.6550 158.4000 158.4075 these frequencies transmit at 1 watt only. 12.5/25.0 12.5/25.0 12.5/25.0 12.5/25.0 12.5/25.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 25.00 25.00 25.00 25.00 25.00 25.00 16 17 18 19 20 21 22 23 24 25 26 27 I s t r a h C e d o C d n a y c n e u q e r F X 23 6881038B80.book Page 24 Thursday, August 30, 2001 5:33 PM Position I s t r a h C e d o C d n a Y R A N M L E R X 24 P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 y c n e u q e r F I MHz 464.5000 464.5500 467.7625 467.8125 467.8500 467.8750 467.9000 467.9250 461.0375 461.0625 461.0875 461.1125 461.1375 461.1625 461.1875 461.2125 461.2375 461.2625 461.2875 461.3125 461.3375 461.3625 462.7625 462.7875 462.8125 462.8375 462.8625 462.8875 UHF Frequency Chart Position Bandwidth 12.5/25.0 12.5/25.0 12.5 12.5 12.5/25.0 12.5/25.0 12.5/25.0 12.5/25.0 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 MHz 462.9125 464.4875 464.5125 464.5375 464.5625 466.0375 466.0625 466.0875 466.1125 466.1375 466.1625 466.1875 466.2125 466.2375 466.2625 466.2875 466.3125 466.3375 466.3625 467.7875 467.8375 467.8625 467.8875 467.9125 469.4875 469.5125 469.5375 469.5625 Bandwidth 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 6881038B80.book Page 25 Thursday, August 30, 2001 5:33 PM Interference Eliminator Codes This allows you to monitor all activity on the channel you are using. Interference Eliminator codes help minimize interference by providing you with a choice of code combinations. Hz 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 Code 14 15 16 17 18 19 20 21 22 23 24 25 26 Hz 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 162.2 Code 27 28 29 30 31 32 33 34 35 36 37 38 Hz 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 s t r a h C e d o C d n a y c n e u q e r F X 25 Carrier Squelch (0) disables Interfeence Eliminator Codes. Code I Y R A N M L E R P I 1 2 3 4 5 6 7 8 9 10 11 12 13 6881038B80.book Page 26 Thursday, August 30, 2001 5:33 PM Position Code Word Position Code Word Position Code Word Digital Private Line/DPL Codes s t r a h C e d o C d n a Y R A N M L E R X 26 P 39 40 41 42 43 44 45 46 47 48 I 49 50 51 52 53 54 I 55 56 57 58 59 60 61 62 63 64 65 66 y c n e u q e r F 023 025 026 031 032 043 047 051 054 065 071 072 073 074 114 115 116 125 131 132 134 143 152 155 156 162 165 172 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 174 205 223 226 243 244 245 251 261 263 265 271 306 311 315 331 343 346 351 364 365 371 411 412 413 423 431 432 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 445 464 465 466 503 506 516 532 546 565 606 612 624 627 631 632 654 662 664 703 712 723 731 732 734 743 754 6881038B80.book Page 27 Thursday, August 30, 2001 5:33 PM No Power Symptom Message not transmitted I Hearing other noises or conversation on a channel Y Troubleshooting R A N M L E R P Limited talk range Message scrambled I Try This:
Recharge or replace battery (NTN8971). Reposition or replace AA batteries. Make sure M is completely pressed as you transmit. Replace, recharge and/or reposition batteries. Confirm Interference Eliminator Code is set. Frequency or Interference Eliminator Code may be in use, change code on all radios if possible. Eavesdrop Reducer is on, and/or setting does not match other radios settings. Steel and/or concrete structures, heavy foliage, buildings or vehicles decrease range. Check for clear line of sight to improve transmission. Wearing radio close to body such as in a pocket or on a belt decreases range. Change location of radio. g n i t o o h s e l b u o r T X 27 6881038B80.book Page 28 Thursday, August 30, 2001 5:33 PM Message not received Symptom I Y R A N M L E R X 28 P g n i t o o h s e b u o r T l Low batteries Heavy static or interference I Keypad locked Try This:
Confirm radios have the same channel, frequency, interference eliminator code and *eavesdrop reducer code settings.
(*XV2600, XU2600) Make sure M is NOT being pressed while trying to listen. Replace, recharge and/or reposition batteries. Obstructions and operating indoors, or in vehicles, may interfere
-- change location. Verify that the radio is not in Scan mode. Radios are too close, they must be at least five feet apart. Radios are too far apart or obstacles are interfering with transmission. Make sure menu is unlocked. Unlock by holding \ for three seconds. Make sure Manager Lockout is disabled. Please refer to Setting Manager Lockout on page 12. Recharge or replace NiMH battery. Replace AA batteries. Extreme operating temperatures affect battery life. 6881038B80.book Page 29 Thursday, August 30, 2001 5:33 PM Symptom Charger light does not come on. Low battery meter reading although new batteries are I installed Y R A N M L E R P I Cannot activate VOX Try This:
Check radio/battery is properly inserted and check battery/
charger contacts to be sure they are clean. Verify that the radio is set to the correct battery type. (Single cell bateries only.) Feature not set and on.Sensitivity set to 0. Please refer to Hands-Free Use/VOX on page 17. g n i t o o h s e l b u o r T X 29 6881038B80.book Page 30 Thursday, August 30, 2001 5:33 PM y t n a r r a W d e t i supplied with the Products. Motorola and/or sold with Products are covered by this warranty only if the fully-charged capacity falls below 80% of rated capacity or they leak. and/or two-way radios, and certain accessories that are sold with them, such as the battery, battery charger and holster manufactured and/or sold by Motorola (Products).
Batteries. Defects in materials and workmanship in batteries that are manufactured by Y Motorola Limited Warranty Personal Communications Products Purchased in the United States and R Canada V. What This Warranty Covers A
Products. Defects in materials and workmanship in wireless cellular telephones, pagers, N M L E R X 30 P
Software. Physical defects in the media that tangibly embodies each copy of any software I VI. What the Period of Coverage Is From the date the Products are purchased by the first end-user:
Products. The warranty is for one year. Exception: The warranty for Spirit GT series and I
Software. The warranty is for 90 days.
Repairs / Replacements. The warranty is for the balance of the original warranty or for 90 VII. Who is Covered This warranty extends to the first end-user purchaser, only. Talkabout series two-way radio accessories is for 90 days. days from the date you receive it, whichever is longer. o r o t o M m L a l i 6881038B80.book Page 31 Thursday, August 30, 2001 5:33 PM I 1-800-331-6456 1-800-548-9954 1-800-353-2729 Canada All Products1-800-461-4575 TTY 1-888-390-6456 (Text Telephone) VIII. What We Will Do to Correct Warranty Problems At no charge to you, we have the option to repair or replace the Products or software that do not conform to the warranty, or to refund the Products purchase price. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products or parts. No software updates are provided. IX. How to Get Warranty Service Please call:
USA Cellular Paging Two-Way TTY 1-888-390-6456 (Text Telephone) You will receive instructions on how to ship the Products to Motorola. You must ship the Products to us with freight, duties and insurance prepaid. Along with the Products you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider (if this Product requires subscription service); (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. If requested, you must also return all detachable parts such as antennas, batteries and chargers. RETAIN YOUR ORIGINAL PROOF OF PURCHASE. We will ship repaired or replacement Products at our expense for the freight and insurance, but at your expense for any duties. If additional information is needed, please contact us at the telephone number listed above. Y R A N M L E R P I y t n a r r a W d e t i i l m L a o r o t o M X 31 6881038B80.book Page 32 Thursday, August 30, 2001 5:33 PM I y t n a r r a W d e t i Y R A N M L E R X 32 P o r o t o M m L a l i
X. What This Warranty Does Not Cover
Products that are operated in combination with ancillary or peripheral equipment or software not furnished by Motorola for use with the Products (ancillary equipment), or any damage to the Products or ancillary equipment as a result of such use. Among other things, ancillary equipment includes batteries, chargers, adaptors, and power supplies not manufactured or supplied by Motorola. Any of these voids the warranty.
Someone other than Motorola (or its authorized service centers) tests, adjusts, installs, maintains, alters, modifies or services the Products in any way. Any of these voids the warranty.
Rechargeable batteries that: (a) are charged by other than the Motorola-approved battery charger specified for charging such batteries; (b) have any broken seals or show evidence of tampering; (c) are used in equipment other than the Product for which they are specified; or (d) are charged and stored at temperatures greater than 60 degrees centigrade. Any of these voids the warranty.
Products that have: (a) serial numbers or date tags that have been removed, altered or obliterated; (b) board serial numbers that do not match each other, or board serial numbers that do not match the housing; or (c) nonconforming or non-Motorola housings or parts. Any of these voids the warranty. I
Defects or damage that result from: (a) use of the Products in a manner that is not normal or customary; (b) improper operation or misuse; (c) accident or neglect such as dropping the Products onto hard surfaces; (d) contact with water, rain, extreme humidity or heavy perspiration; (e) contact with sand, dirt or the like; or (f) contact with extreme heat, or spills of food or liquid.
Physical damage to the surface of the Products, including scratches, cracks or other damage to a display screen, lens or other externally exposed parts. Failure of Products that is due primarily to any communication service or signal you may subscribe to or use with the Products.
Coil cords that are stretched or that have any broken modular tabs.
Products that are leased. 6881038B80.book Page 33 Thursday, August 30, 2001 5:33 PM Flat-rate repair rates may apply to Products not covered by this warranty. To obtain information about Products needing repairs that are not covered by this warranty, please call the telephone number previously listed. We will provide information on repair availability, rates, methods of payment, where to send the Products, etc. XI. Some Other Limitations This is Motorolas complete warranty for the Products, and states your exclusive remedies. This warranty is given in lieu of all other express warranties. Implied warranties, including without limitation, the implied warranties of merchantability and fitness for a particular purpose, are given only if specifically required by applicable law. Otherwise, they are specifically excluded. No warranty is made as to coverage, availability, or grade of service provided by the Products, whether through a service provider or otherwise. No warranty is made that the software will meet your requirements or will work in combination with any hardware or applications software products provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. In no event shall Motorola be liable, whether in contract or tort (including negligence) for damages in excess of the purchase price of the Product, or for any indirect, incidental, special or consequential damages of any kind, or loss of revenue or profits, loss of business, loss of information or data, or other financial loss arising out of or in connection with the ability or inability to use the Products, to the full extent these damages may be disclaimed by law. I I Y R A N M L E R P y t n a r r a W d e t i i l m L a o r o t o M X 33 6881038B80.book Page 34 Thursday, August 30, 2001 5:33 PM XII. Patent and Software Provisions At Motorolas expense, we will defend you, and pay costs and damages that may be finally awarded against you, to the extent that a lawsuit is based on a claim that the Products directly infringe a United States patent. Our obligation is conditioned on: (a) you notifying us promptly in writing when you receive notice of the claim; (b) you giving us sole control of the defense of the suit and all negotiations for its settlement or compromise; and (c) should the Products become, or in Motorola's opinion be likely to become, the subject of a claim of infringement of a United States patent, you permit us, at our option and expense, either to: procure for you the right to continue using the Products; replace or modify them so that they become non-infringing; or grant you a credit for such Products, as depreciated, and accept their return. The I depreciation will be an equal amount per year over the lifetime of the Products, as established by Motorola. Motorola will have no liability to you with respect to any claim of patent infringement that is based upon the combination of the Products or parts furnished under this limited warranty with ancillary equipment, as defined in VI., above. I This is Motorolas entire liability with respect to infringement of patents by the Products. Laws in the United States and other countries preserve for Motorola and other third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to reproduce in copies and distribute copies of such software. The software may be copied into, used in and redistributed with only those Products that are associated with such software. No other use, including without limitation, disassembly or reverse engineering of such software or exercise of exclusive rights in such software is permitted. y t n a r r a W d e t i Y R A N M L E R X 34 P o r o t o M m L a l i 6881038B80.book Page 35 Thursday, August 30, 2001 5:33 PM XIII. State Law and Other Jurisdiction Rights Some states and other jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction. To obtain information on Motorola Personal Communications Products, including warranty service, accessories and optional Extended Warranties on selected Products, please call:
USA Cellular Paging Two-Way TTY 1-888-390-6456 (Text Telephone) To correspond with Motorola about the Products, please write us at http://www.motorola.com or at:
In the USA:
Motorola, Inc. 600 North U.S. Highway 45 Libertyville, IL 60048 Canada All Products1-800-461-4575 TTY 1-888-390-6456 (Text Telephone) In Canada:
Motorola Canada Limited 5875 Whittle Road Mississauga, ON L4Z 2H4 1-800-331-6456 1-800-548-9954 1-800-353-2729 6881038B80.book Page 36 Thursday, August 30, 2001 5:33 PM Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Patent Notice This product is covered by one or more of the following United States patents. 5896277 5894292 5864752 5699006 5742484 D408396 D399821 D387758 D389158 5894592 5893027 5789098 5734975 5861850 D395882 D383745 D389827 D389139 5929825 5926514 5953640 6071640 D413022 D416252 D416893 D433001 6881038B80.book Page 37 Thursday, August 30, 2001 5:33 PM Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. More specifically, changes or modifications not expressly approved by Motorola may void the users authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. Note: Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited. 6881038B80.book Page 38 Thursday, August 30, 2001 5:33 PM 6881038B80.book Page 55 Thursday, August 30, 2001 5:33 PM Index A Accessory ..................................................18 Cover .....................................................6 Adjust volume ...............................................6 Alkaline batteries ..........................................5 B Back cover ....................................................4 Bandwidth ...................................................12 Battery Alkaline ..................................................5 Install ..............................................5 Charge NTN8971NiMH ...............................7 Meter .....................................................5 NTN8971NiMH Charge............................................7 Install ..............................................4 Optimum life ..........................................7 Setting .................................................20 Button Beeps ..............................................14 C Call display .................................................16 Call tone...................................................6,16 Channel ................................................3,9,14 Activity .................................................15 Change ..................................................6 Monitor.................................................19 Setting .................................................10 Charger .........................................................7 Desktop Drop-in.....................................8 Multi-unit ................................................9 Plug-in....................................................8 Charging .......................................................7 Clean radio..................................................22 Cloning.....................................................9,13 Code Interference Eliminator......................9,11 Scrambling.............................................9 D Default Diagram Settings................................................13 Function .................................................6 Drop-in Charger ............................................8 E Eavesdrop Reducer ....................................11 Exit a menu ...................................................6 F FCC FAX FORMS 1-202-418-0177 ..............................1 1-800-418-3676 ..............................1 1-800-418-FORM ...........................1 1-888-225-5322 ..............................1 1-888-CALL-FCC............................1 QUESTIONS 6881038B80.book Page 56 Thursday, August 30, 2001 5:33 PM UHF Bandwidth ...................................12 FCC Licensing Information ...........................1 Frequency.....................................................3 Setting .................................................10 Functions ......................................................6 G Gain ............................................................16 H Hands-Free Use .........................................17 I Icon Programming ........................................9 Indicator Light
...............................................................6 Install AA Battery .............................................5 NTN8971NiMH Battery..........................4 Interference Eliminator Code ...................9,11 Internal VOX ...............................................18 L Licensing Information FCC .......................................................1 Charger..................................................7 Desktop Charger ...................................8 Radio indicator.....................................15 keypad ...................................................6 Light Lock M Meter Battery ...................................................5 Mic Gain......................................................16 Microphone ...................................................6 Monitor Signal Strength ..............................15 MOTOROLA SERVICES 1-800-448-6686 .....................................1 N noise ...........................................................16 NTN8971NiMH battery..................................4 O Obstacle......................................................15 Operating radio ...........................................15 Optional Accessory www.motorola.com/spirit........................9 P Plug Audio....................................................17 Plug-in Charger.............................................7 Programming Mode ................10,11,12,13,14 R Radio Back cover .............................................5 Bottom ...................................................4 Clean ...................................................22 Diagram .................................................6 Display ...................................................5 Factory default settings........................13 Features...............................................16 Frequency wave/Channel ......................9 6881038B80.book Page 57 Thursday, August 30, 2001 5:33 PM Functions and Settings ........................14 Latch......................................................4 Off..........................................................3 On........................................................14 Operating.............................................21 Out of range.........................................15 Radio Display................................................3 Range Talking .................................................21 Roger Beeps...............................................14 S Scan............................................................28 Turn On/Off............................................6 Scan List .....................................................19 Scrambling Code ........................................11 Sensitivity level ...........................................17 Setting Battery Type ........................................20 Call tone ..............................................16 Channel ...............................................10 Factory Defaults ..................................13 Interference Eliminator Code...............11 Scrambling Code .................................11 Volume ..................................................3 Setting VOX Sensitivity Level ...............17, 18 Signal Strength Indicator ............................15 Speaker ........................................................6 T Talk Confirmation Tone ..............................20 Talking range ..............................................21 To talk ...........................................................6 Transmit ......................................................18 U Use and Care..............................................22 V Volume Adjust.....................................................6 VOX .......................................................14,17 External................................................17 Off ........................................................18 W Website Motorola www.motorola.com Accesories www.motorola.com/radios/professional FCC www.fcc.gov .........................................1 6881038B80.book Page 67 Thursday, August 30, 2001 5:33 PM XTN-Series Quick Reference Function Appearance Channel Frequency Interference Eliminator Code Eavesdrop Reducer Battery Meter Channel Scan XU2600, XV2600 Receiving Use [or ] for1 through 6*
XU2600, XV2600 Visible if Feature is On. Visible except when changing features. Press J to access. 6 Others speaking on the same frequency and code. Signal strength 1-6 6881038B80.book Page 68 Thursday, August 30, 2001 5:33 PM XTN Series User Programming Radio On Visual
\as needed, then [or ]
Choose1,2,3 or Off = 0 Call Tone Mic Gain/
Sensitivity Level Scan List
Choose1 low, 2 medium, or 3 high sensitivity. Choose Y (yes) or n (no) for each individual channel.
*XU2600, XV2600 only
*Battery Type Lock Keypad A A (alkaline) n (other rechargeable single cells) Does not appear if using NiMH. Hold \for 3 seconds no flashing XTN Series Buttons P Turn power on/off T S Access Preset Channel B Transmit call tone
*XU2600, XV2600 only M Talk on the radio
Exit a menu
\ Scroll through menus
Lock Keypad 3 seconds
or
] Scroll through settings. 6881038B80.book Page 1 Thursday, August 30, 2001 5:33 PM 6881038B80.book Page 2 Thursday, August 30, 2001 5:33 PM Extend Your Productivity Provides a cost-effective solution to onsite communication needs. Designed for heavy duty, everyday industrial use. Well suited for construction, manufacturing, security, property management, retail, etc. Rugged MOTOROLA QUALITY Shock/drop/temperature tested to meet Motorola's High standards. Weather/Dust Resistant IP-54 rating Built to Military Specifications 810 C, D, E & F Dependable Indoor/Outdoor Coverage Will provide a communication range*
of up to 250,000 sq. ft. or 20 floors indoors and up to 6 miles outdoors.
*Range will vary based on terrain and conditions and model selected. Simple and Easy to Operate Allows one-to-one or group communication at the push of a button. With no phone numbers to dial, plus the manager lock feature, there's little to no training needed for your staff to be fully up to speed. Cost Efficient No monthly fees to pay and no service contracts. Compatible with older Motorola Spirit radios and audio accessories. User Guide Included Business Exclusive Frequencies Frequencies set aside exclusively for business-only use (FCC License required). 38 PL Codes, 83 Digital PL Codes. Talk Hands-Free Mode (VOX) Advanced voice activation (VOX) let's you talk hands-free; XV2600, XU2600 models do not require accessories. Voice Compression Technology Helps provide better sound even at longer distances. Cloning Capability Radio Specification Chart Transmit Power Receiver Sensitivity Audio Putput Receiver Technology 1 or 2 Watts
-120 dBm for 12 dB SINAD 90 dB SPL Direct Conversion Accessories for XTN Series - Brochure included Convenient headphones, multi-chargers, drop-in chargers, carry cases, and rechargeable battery packs available from your retailer or www.motorola.com/sradios/professional MOTOROLA, the Stylized M Logo, XTN Series and all other trademarks indicated as such herein are trademarks of Motorola, Inc. Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. 2001 Motorola, Inc. All rights reserved. Printed in the U.S.A. Motorola XTN Series
@xtnseries@
Proof of Purchase FCC License required. PWARNING CHOKING HAZARD SMALL PARTS Not for children under 3 years. This product is not intended to be used as a toy or plaything. 6881038B80.book Page 3 Thursday, August 30, 2001 5:33 PM 3
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2001-12-10 | 151 ~ 159 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2001-12-10
|
||||
1 | Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0003778479
|
||||
1 | Physical Address |
8000 West Sunrise Blvd
|
||||
1 |
Ft Lauderdale, Florida 33322
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 | Grantee Code |
AZ4
|
||||
1 | Equipment Product Code |
89FT3803
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
D**** Z****
|
||||
1 | Title |
Regulatory Compliance Manager
|
||||
1 | Telephone Number |
95472********
|
||||
1 | Fax Number |
--********
|
||||
1 |
d******@motorolasolutions.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Motorola Inc
|
||||
1 | Name |
M**** R********
|
||||
1 | Physical Address |
8000 West Sunrise Blvd
|
||||
1 |
Ft. Lauderdale, Florida 33322
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
954-7********
|
||||
1 | Fax Number |
954-7********
|
||||
1 |
m******@motorola.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | XTN Series Hand Held Two-Way Portable Radio | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas tested for this filing in Push-to-Talk and body-worn configurations. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. Grantee must coordinate with organizations using this device to ensure RF exposure requirements are met. The highest reported SAR values are - Head: 0.296 W/kg; Body-worn: 0.835 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
n/a | ||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | 151 | 159 | 1 | 2.5 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
1 | 2 | 9 | 151 | 159 | 1 | 2.5 ppm | 16K0F3E | ||||||||||||||||||||||||||||||||||
1 | 3 | 9 | 151 | 159 | 2.3 | 2.5 ppm | 11K0F3E | ||||||||||||||||||||||||||||||||||
1 | 4 | 9 | 151 | 159 | 2.3 | 2.5 ppm | 16K0F3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC