BLUETOOTH SPEAKER WITH NFC ORBIT The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by The Source (Bell) Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners. 8042432/35 INSTRUCTION MANUAL WHATS INCLUDED:
Bluetooth speaker USB to micro USB charging cable Carabiner User Manual FEATURES:
1. Bluetooth 3.0 2. NFC Connectivity 3. Handsfree telephone calling 4. Stereo music 5. Operating distance up to 10m (33 ft.) 6. Operation time up to 8 hours
(medium volume level) 7. IPX 6 Water-Resistant feature COMPONENT IDENTIFICATION 1. Power ON/OFF 2. NFC connection location 3. Previous song/Volume 4. Microphone 5. Next song/Volume +
6. Handsfree 7. USB charging jack 1 2 3 4 6 5 7 PRODUCT OVERVIEW You can use this item with iPad, iPhone, iPod and many types of smartphones to stream music, and enjoy handsfree calling. In order to get the best results when using this device, please read this manual first before using. This unit has IPX 6 rating: Protected against heavy seas Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 litres/
min at a pressure of 100kN/m2 for 3 minutes from a distance of 3 metres/10 feet. Do not submerge in water. PAIRING In order to pair your audio device to your Bluetooth Speaker for the first time, follow the steps below:
1). Make sure your audio source is held within three meters of your speaker. 2). Press and hold the button on your speaker to power ON. The LED light will blink blue 3). Go to the Bluetooth Manager of your audio source. Please refer to the Users Manual of 4). Search Bluetooth devices and select your speaker to start connecting. Look for name HR 5). Once paired, the blue LED light will be solid. You will hear a chime, and you can start to indicate that you have entered pairing mode. your audio source for more information. Orbit. listening to music. Tip: The next time when you switch the speaker ON it will connect automatically as long as your Bluetooth function is switched ON on your audio device. When you disconnect the speaker while paired, the blue LED light will start to blink quickly, the speaker has entered into pairing mode. If there is no device paired within 5 minutes the speaker will turn OFF. guarantee compatibility with all the functions on every Bluetooth enabled device. Please check your mobile phones user manual for compatibility and functionality. TROUBLESHOOTING Problem Solution The speaker doesnt connect to audio device A tone is heard every few seconds Bluetooth connection distance cannot reach 9.75m (32 ft.) The speaker will not power ON The speaker doesnt control track(s)/
Volume The speaker distorts at high volume Speaker needs to be connected/re-paired to audio device Speaker needs to be charged Avoid operating the Bluetooth speaker in areas of strong electromagnetic interference, such as near induction cookers, large power fans, motors etc. Move the speaker closer to audio device. Fully charge the speaker and try again. Speaker needs to be charged Speaker needs to be in Bluetooth mode for full control The devices volume needs to be lowered WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. check your device manual for compatibility. PAIRING BY ONE-TOUCH CONNECTION WITH NFC 1. Enable the NFC function on your device. 2. Use your NFC-enabled device and touch the NFC logo on the speaker. 3. Confirm the NFC connection on your device. This will vary depending on your device, 4. The speaker will chime once paired. CHARGING This speaker has a built-in rechargeable Li-Ion battery. Fully charge the speaker before first use. Charge the battery as follows:
1. Connect one end of the included USB charging cable to the charging port on your speaker. Then plug the other end of the USB charging cable into a suitable port on your computer or 5V/1A power adapter (sold separately). 2. The red LED light will turn ON. When the charge is complete the red LED light will turn OFF. 3. It will take 2.5 hours to fully charge the speaker by PC USB port. HANDSFREE SPEAKERPHONE When a smartphone is connected to your speaker follow the steps below to take calls handsfree. 1. Short press the button to pick up the call. 2. Short press the button again to hang up the call. 3. Press and hold the button for 2 seconds to reject the call. TO PLAY MUSIC FROM YOUR PC OR LAPTOP After pairing the device to your PC or laptop, right-click on the speaker icon on the lower right hand corner of the task bar, select Playback devices. Under the Playback tab, the paired device will show within the list. To connect it, click on the device to set it as the default device. The audio will start to play from the paired device. UNDERSTANDING THE LED STATUS LIGHTS When charging your speaker o Solid red LED=charging o Red LED OFF=charging complete When pairing your speaker to a Bluetooth device o Quick blinking blue LED=Bluetooth not connected, ready to pair o Slow blinking blue LED=Bluetooth connected while playing music o Solid blue LED=Bluetooth connected while not playing music TECHNICAL SPECIFICATIONS Carrier Frequency :
Battery Capacity :
Frequency Response:
Operation Distance:
Output Power:
Impedance:
NOTE: This speaker is in compliance with the specified Bluetooth version. It does not Bluetooth 3.0 3.7V, 600mAh 20Hz-20KHz Up to 10 metres/33 feet 5W (Max) 4 Ohms undesired operation. THE FCC WANTS YOU TO KNOW This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) this device must accept any interference received, including interference that might cause Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Industry Canada Notice This device complies with RSS-247 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of Industry Canada. IC NUMBERS: 255A-8042432 operation of the device. THE SOURCE WARRANTY The Source warrants that this product will be free from defects in materials and workmanship for a period of 12 months from the date of purchase. Within this period, simply take the product and your proof of purchase to any The Source store or participating dealer and the product will be replaced
(where available) without charge. Any product which has been subject to misuse or accidental damage is excluded from this warranty. This warranty is only applicable to a product purchased through The Source company-owned stores or participating dealers in Canada where the warranty is included with the product. While this warranty does not confer any legal rights other than those set out above, you may have additional statutory rights which will vary under the laws of the various countries, states, provinces and other governmental entities in which The Source operates. This warranty is subject to all statutory rights you may have in Canada. Imported by:
The Source, Barrie, Ontario, Canada, L4M 4W5 Manufactured in China www.headrushaudio.com Please Recycle 2015 The Source All rights reserved. FCC Caution. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body.