Moxa Industrial ZigBee Module SLEZ2150 Users Manual First Edition, November 2011 www.moxa.com/product 2011 Moxa Inc. All rights reserved. Moxa Industrial ZigBee Module SLEZ2150 Users Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice 2011 Moxa Inc. All rights reserved. Trademarks All other trademarks or registered marks in this manual belong to their respective manufacturers. The MOXA logo is a registered trademark of Moxa Inc. Disclaimer Information in this document is subject to change without notice and does not represent a commitment on the part of Moxa. Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the products and/or the programs described in this manual, at any time. Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for its use, or for any infringements on the rights of third parties that may result from its use. This product might include unintentional technical or typographical errors. Changes are periodically made to the information herein to correct such errors, and these changes are incorporated into new editions of the publication. Technical Support Contact Information www.moxa.com/support
+1-714-528-6777
+1-714-528-6778 Moxa Americas Toll-free: 1-888-669-2872 Tel:
Fax:
Moxa Europe Tel:
Fax:
+49-89-3 70 03 99-0
+49-89-3 70 03 99-99
+86-21-5258-9955
+86-21-5258-5505 Moxa China (Shanghai office) Toll-free: 800-820-5036 Tel:
Fax:
Moxa Asia-Pacific Tel:
Fax:
+886-2-8919-1230
+886-2-8919-1231 Table of Contents 1. Introduction ...................................................................................................................................... 1-1 Overview ........................................................................................................................................... 1-2 Features ............................................................................................................................................ 1-2 Specifications ..................................................................................................................................... 1-2 2. Gettting Started ................................................................................................................................ 2-1 Module Layout .................................................................................................................................... 2-2 Block Diagram .................................................................................................................................... 2-2 Connector Locations ............................................................................................................................ 2-3 Hardware Installation .......................................................................................................................... 2-3 Software Installation ........................................................................................................................... 2-3 A. Regulatory Statements...................................................................................................................... A-1 1 1. Introduction The following topics are covered in this chapter:
Overview Features Specifications SLEZ2150 User's Manual Overview Introduction The SLEZ2150 module is designed to provide ZigBee communication for all ZigBee-device-based systems. It communicates via the standard 802.15.4 protocols. The SLEZ2150 uses the CC2530 chipset from TI. This module is connected to the main board through SMA connector and special circuitry to allow for compatibility with 3.3V PCI signaling. Features Instant connection of any serial device to Zigbee network Secure data access with AES Specifications 250 kbps 130 m RF Data Rate Outdoor/RF Line-of-Sight Range Transmit Power Receiver Sensitivity (1% PER) -96 dBm Adjustable Power Frequency Band Interference Immunity PAN ID Node ID RF Channel Device Type Network Topology Security Operating Temperature Power Requirement 4.5 dBm (Max) Yes 2.4 GHz DSSS (Direct Sequence Spread Spectrum) 0x0000~0xFFFF 0x0000~0xFFFF 11-25 (15 channels) Coordinator, Router, End Device Star, Mesh, Cluster ZigBee Certified
-40 C to +75 C 3.3 V +/-10%
Information for OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1)This device is intended for OEM integrators only. 2)Please See the full Grant of Equipment document for other restrictions. 1-2 2 2. Getting Started This chapter covers the module layout, and block diagram, hardware installation of the SLEZ2150. Software installation is covered in the next chapter. Module Layout Block Diagram Connector Locations Hardware Installation Software Installation SLEZ2150 User's Manual Module Layout Gettting Started Block Diagram 2-2 SLEZ2150 User's Manual Gettting Started Connector Locations Hardware Installation The ZigBee Module can be installed into all MOXA Zigbee system board series. Steps for Installation 1. Attach the WLAN antenna to connector UI 2. Let ZigBee Module connect to NPort Z2150/3150 3. Screw on the ZigBee Module Software Installation After physically installing the SLEZ2150, the module will be recognized on the new system board after the following steps. Steps for Installation 1. Apply power to the system board. 2-3 A A. Regulatory Statements Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Labeling requirements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: SLEZ2150 RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.