FCC ID: 2AMH2-BMBH143C Bluetooth Headphone

60x95(mm) 128g +PANTON 2347C 1 Device and Accessories 2 Instructions 3 Operating the Headphone 1 2 3 4 Press Buttons 5 6 7 8 3.5mm Audio Connector ANC Indicator Light Micro USB Charging Port (cable included) Led Light Indicator Active Noise Cancel Button (ANC) 1 2 3 4 5 6 7 8 X4.0 Bluetooth Headphone 3.5mm Audio Cable x 1 USB Charge Cable x 1 User Manual x 1 X4.0 BMBH143C Bluetooth Headphone For More Information Please Visit www.xmpow.com Hold 2s Hold 4s Hold 6s Power ON Power OFF Pairing Mode Pairing to a Bluetooth Device 1. 2. 3. 4. Make sure the Bluetooth on the mobile device you are trying to connect the headphones to is on. Hold the button for 6 seconds to enter pairing mode. The red and blue indicators will start ashing. In your devices Bluetooth list, search for MPOW X4.0, click on it, and your devices will pair. The headphone will automatically power off after 15 minutes without being paired to a device. Settings Bluetooth DEVICES MPOW X4.0 Range < 1M Bluetooth Connected Choose MPOW X4.0 to Connect Charging the Headphone 4 LED Behaviour 5 Specifications 6 Limited Warranty Output: DC 5V 0%

2h Charging 100%

Charging the Headphone This headphone has a built-in, non-removable lithium battery. We highly recommend that you fully charge the headphone before the rst use. 1. To charge, connect the charging cable to the charging port, and then to a USB charger. 2. A red light will indicating the headphone is charging. 3. The red light will turn off once the headphone is charged. The blue Light is on all the time when fully charged. Fast Charging It can be frustrating to forget to charge your headphones. For those moments, our Fast Charge technology gives you 1.5 hours of play time with only 10 minutes of charging. NOTE 1. As with all rechargeable batteries, the charge / discharge cycles affect the batterys performance over time. The headphone automatically turns OFF while charging. You will hear a voice prompt when the battery is low, and the red indicator will ash. The charging temperature is 50-113. 2. 3. 4. Work Status Indicator Light Status Voice Prompt Power on Power off Blue light ashes 3 times slowly Red light ashes 3 times slowly then off x 3 x 3 Pairing mode Red & Blue Lights ash alternately and fast Power on Power off Pairing Operation Range Talking Time Playing Time Charging Time Charging Voltage Battery Capacity 33 feet 15-20 hours 15-20 hours 2 hours DC 5V 0.25V 3.7V / 500 mAH Red light is always on and the blue light ashes once every four seconds Blue light ashes once every 5 seconds Incoming calls Connected Disconnected Low battery warning Blue light stop ashing then red light ash Charging Red light is on when charged and blue Light is on all the time when fully charged x1/4S x1/5S Connected Disconnected Battery Low NOTE Actual play and talk times will ultimately depend on the phone / mobile device you are using, the listening volume, as well the frequency of the use of the different buttons and toggling between functions. MPOW Technology Co., LTD, warrants to you that the Product

(excepting components provided in / with the Product) will be free from defects in workmanship and materials for a period of ONE year from the date of retail purchase by you

(the Warranty Period). During the Warranty Period, the Product (excepting components), will be repaired or replaced at MPOWs option, without charge for either parts or labor OR at MPOWs sole option, the price of the Product may be refunded, subject to depreciation based on your purchase price for the Product pro-rated over the remaining balance of the Warranty Period. Any warranty service or replacement of parts will not extend the Warranty Period. This Limited Warranty does not cover defects which are a result of :

1. Damage caused by accident, unreasonable use or neglect

(including the lack of reasonable and necessary main-

tenance);

Damage during shipment (claims must be presented to the carrier);

Damage to, or deterioration of, any accessory or decorative surface;

Damage resulting from failure to follow instructions contained in your owners manual;

Damage resulting from the performance of repairs by someone other than an authorized MPOW service center ;

Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads. 2. 3. 4. 5. 6. Special Feature: Pair your Mpow headphone to two devices at the same item Listen to audio on your PC, without missing a phone call. Can also connect to two smartphones, smartphone and tablet, tablet and laptop, etc... Connect to the rst device. Once complete, disconnect the Bluetooth of that device. Connect to the second device. Turn on the Bluetooth of the rst device and re-connect to it. Now both devices will be paired to the headphone at the same time. 1. 2. 3. 4. 5. Play / Pause / Answer Call / Hang Up call Press Buttons Short Press

/

Answer / Hang up Short Press Press 2S Play / Pause

/

Reject an Incoming Call Activating Voice Control / Your Devices Personal Assistant To activate voice control, simply double tap the center power button on the earcup, and you will hear your phones notica-

tion that voice control is activated. You can now ask your personal assistant whatever you want, from the microphone on your headphone. NOTE If a call comes in while you are listening to music or stream-

ing a video, the audio / video will be paused, and you will hear your phones ringtone through the headphone. Once the call is ended, your entertainment will resume. FCC Statement 7 Operation is subject to the following three conditions:

1. 2. 3. This device may not cause harmful interference. This device must accept any interference received, includ-

ing interference that may cause undesired operation. This device has been evaluated to meet general RF expo-

sure requirements. The device can be used in portable exposure condition without restriction. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm-

ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or a technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority . to operate the equipment Next Song / Volume Up / Previous Song /

Volume Down Press Buttons Long Press Short Press Next Song Volume Up Press Buttons Long Press Short Press Previous Song Volume Down Re-dial Last Number Hold the button for 2 seconds while in standby mode. You will hear Last Number Redial Change from Headphone to Phone Mode Hold the button for 2s and you will be able to take a call from your phone rather than your headphone. Remove Bluetooth Pairing Un-pairing the headphone from your device Simultaneously press and while in standby mode to un-pair the headphone from your mobile device Active Noise Cancel Slide the noise cancel switch to be ON / OFF. When the noise is cancelled, the green light is on. Audio Cable Connection Smartphone PC/MAC Tablet 3.5mm AUX Cable NOTE Just plug one end of the audio cable into the headphone, and the other one into your mobile device or PC to listen whatever you are streaming, or to participate in a conference call. The Bluetooth mode will automatically disconnect when you insert the audio cable. The Bluetooth word mark and logos are registered trade-

marks owned by Bluetooth SIG, Inc. and any use of such marks by MPOW TechnologyLTD is under license. Other trademarks and trade names are those of their respective owners. WARNING!

1. 2. 3. The product can ONLY be charged by 5V Adapter/USB Port, otherwise it will cause heat and re. The BMBH143C is not a toy, please supervise your children when using the equipment. To avoid potential risks and protect products, please do not charge it at a temperature lower than 50 or higher than 113. MPOW TECHNOLOGY CO.,LTD Copyright MPOW Inc. All rights reserved. www.xmpow.com | support@xmpow.com Phone Number : 1-844-869-3583 FCC ID : 2AMH2-BMBH143C This device complies with Part 15 of the FCC Rules. MADE IN CHINA

Internal Photos OPEN VIEW OF EUT VIEW OFBATTERY INTERNAL VIEW OF EUT-1 Antenna INTERNAL VIEW OF EUT-2 INTERNAL VIEW OF EUT-3 INTERNAL VIEW OF EUT-4 INTERNAL VIEW OF EUT-5

External Photos TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT VIEW OF EUT (PORT)-1 VIEW OF EUT (PORT)-2

FCC ID Label Location FCC ID: 2AMH2-BMBH143C This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration concerning Antenna Specification It is hereby declared that the product Model No.: BMBH143C FCC ID: 2AMH2-BMBH143C fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

Type of antenna:

Gain of the antenna:

Frequency range:

PCB Antenna 0 dBi 2402-2480 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: MPOW TECHNOLOGY CO., LIMITED Address:

WAN KL, HK, CHINA Place:

Date: 2018-07-30 HK RM 603, 6/F, HANG PONT COMM BLDG 31 TONKIN ST, CHEUNG SHA Signature: