FCC ID: 2AHVR1100AS Tablet PC

Contents 1 Introduction .............................................................................................................................. 1 1.1 Acknowledgement ........................................................................................................... 1 1.2 Safety Notice .................................................................................................................... 1 1.3 Abbreviation/term ............................................................................................................ 2 2 Brief introduction for MID product ....................................................................................... 3 2.1 Diagram for MID complete machine ............................................................................... 3 2.2 Introduction to accessories of MID .................................................................................. 4 2.3 MID state and notice ........................................................................................................ 4 3 Quick start ................................................................................................................................ 5 3.1 Key function..................................................................................................................... 5 3.2 Starting up and turning off ............................................................................................... 5 3.3 Unlocking and closing of the screen ................................................................................ 6 3.4 Use of touch screen .......................................................................................................... 6 3.5 Homepage interface ......................................................................................................... 8 3.6 USB connection ............................................................................................................. 10 3.7 Memory card .................................................................................................................. 11 4 Connection Establishment ..................................................................................................... 12 4.1 WIFI Connection ........................................................................................................... 12 4.2 Bluetooth Connection .................................................................................................... 13 5 Communication ...................................................................................................................... 15 5.1 Camera ........................................................................................................................... 15 6 Other Applications ................................................................................................................. 16 6.1 File Management ........................................................................................................... 16 1 Introduction 1.1 Acknowledgement Many thanks for you choosing this product. The product belongs to MID(Mobile Internet Device), which is a kind of mobile internet device, delicate, small and exquisite, and also portable. It is also equipped with a piece of touch LCD of high definition, which can be used to watch vedios and pictures of high definition. It supports installation of multiple application programs on office and entertainment. The fantastic operation interface will give you a brand-new user experience. This manual systematically introduces diversified functions, using skills and matters needing attention of this MID, please read this manual carefully before using it. 1.2 Safety Notice Before using MID, please read information in this section, and make your children learn about the information. About more detailed information, please refer to safety instructions and matters needing attention. Please dont use MID when you are driving, for fear of hindering safe driving. In medical places, please observe relevant stipulations and regulations. And in regions near the medical devices, please shut down MID. Please shut down MID or enable the airplane mode when boarding, so that the wireless signals will not interfere control signal of the airplane. Please shut down MID neighboring electronic equipments with high accuracy, otherwise, breakdown of electronic equipments may be brought about. Please dont dismantle the MID and its accessories on yourself, and only the authorized agency can maintain this MID. Please keep MID far away from magnetic equipment, radiation from MID will erase information stored on the magnetic equipment. Please dont use MID in places with high temperature and inflammable gas (such as nearby gas station). 1 Please put MID and its accessories in places beyond childrens touch, please dont let children use MID without supervision. During using of this MID, please observe related laws and regulations, respect privacy and legitimate rights of others. Please strictly abide by relevant explanations in this manual when using USB data line, otherwise, MID or personal computer may be damaged. Please dont use the MID in humid environment such as bathroom, etc., and the MID being soaked or rinsed by liquid must be avoided. 1.3 Abbreviation/term Abbreviation/term Full name Explanations MID Mobile Internet Device Mobile internet terminal WIFI Wireless Fidelity based on IEEE 802.11b Wireless Local Area Network standard Alternate name Micro SD, super-miniature storage card TF Trans Flash 2 2 Brief introduction for MID product 2.1 Diagram for MID complete machine Figure 2-1 3 2.2 Intr roductio n to acce essories of MID Packing list t The followin ng articles are e included in your packing g box of MID D:

Comple ete machine o of MID Power a adaptor USB C able Users m manual 2.3 MID D state a and notic ce Iconograph hy for notifica ation When a prom on the scree detailed info message win mpt message en with your ormation. Th ndow. The fo e shows on yo finger to ope hen you may llowing are ic our notice pa en the notice click the me conography f anel, please c list. Click op essage box a for icons in st click the colu ptions needin and slide upw tatus bar:

umn box and ng to check to wards to clos slide o see e the Ma ail notice M Mute Gm mail notice Withou ut SD card Compute connected er and MID a through USB are B line Uploading/

/Downloading g Events wa aiting to be d done Download ding finished Alarm clock openin g General notic G synchron ce (for examp nous error) ple:

Play ying music In data sy ynchronism Insufficient t space of SD D card M More WIFI serv netwrk vice is connec cted, e k is available Battery y symbol 4 Airp plane mode Cha arging Bluetooth is s already conn nected G GPS 3 Quick k start 3.1 Key y functio on Description ns for key fun nction:

Power ke ey g time to start

, press this ke t up ey for a long g time to pop p up

, press this k hen breakdow ake your devic key to close t wn appears, p ce enter into nder the screenUn press the pow wer ate shutdown sta n the last op perating step or the previ ous Press this k Under start shutdown o Under start starting up key for 7 se key for a long ting up state, option ting up state, p state or wh econds to ma Press this operating in key to return nterface Press this interface Homepag ge key key to return n back main function inte erface from a any Return ke ey 3.2 Star rting up and tur rning off f Press the po started, the indication of ower key for machine en f sliding icon 3 seconds, y nters into scr n on the interf you can see t reen lock sta face. the starting u ate, please u up picture. A unlock accor After the syste rding to dire em is ection 1 After pre essing the pow wer key for a a long time, t the shutdown n option will p pop up. Starting up p Turning off f 2 Click OK K. 5 3.3 Unlocking and closing of the screen The machine will close automatically when the screen is left unused 1After the screen being left unused for a period of time, the machine will close screen automatically, so as to save battery power. 2Under screen on state, press the power key, the screen will close immediatey. Turninng on under screen off state If the screen is in off state, you can unlock the screen by pressing power key for a short time or the return key for a long time. After opening, the screen will enter lock state, press lock icon by your finger and slide upward, the screen will be unlocked. Figure 3-2 3.4 Use of touch screen Operating mode in MID There are various ways to skim the main screen, menu and application program, etc. on your MID. When you want to use screen keyboard entry, and you want to select items on the homepage interface such as aplication program, you only use your finger to click. Click to select 6 Press on Drag Rotate If you want to unlock the available option of a certain item (such as textbox or inter-linkage in the webpage), or move shortcut on the homepage interface and menu of main program, only press the item. Slide quickly or slide Quick sliding or sliding means doing rapid vertical or horizontal drag movement by using finger on the picture. Before you starting to drag, you must press it with your finger and impose a certain pressure, and dont loosen the finger before draging to the wanted position. Aiming at most of pictures, only turn the MID in side direction, the screen direction can be shifted from cross direction to vertical direction. For example, when you input characters, watch cinema, etc. 7 3.5 Homepage interface When you open the screen and you may use application program, shortcut and user-defined mode to set wallpape of your homepage interface. Search Time Wallpaper Figure 3-2 Skill: in any application programs, you can press homepage key to return homepage interface. Custom homepage interface Change desktop wallpaper 1. Press blank region on the homepage interface to pop up the menu. 2. When the menu popping up, choose source of homepage interface wallpaper you want to 3. After clicking source of wallpaper, click picture you want, and then select Set change. wallpaper. 8 Figure 3-3 9 3.6 USB connection Storage setting of MID Before transmitting document, you must set storage mode for your MID firstly:

1. Connect MID with computer by using USB transmission line. Notice bar will show the 2. Click status bar, options of status bar show. 3. Among options of status, click to choose USB connected, then click to open USB notice prompt. storage device. 4. At this time, USB has already been connected. Copy the document to storage card 1. Connect MID and computer together with USB cable. 2. After setting according to storage of MID, connect with computer successfully. 3. Open your computer, in my computer, examine content in removable disk (x). 4. Find the document you want to copy, copy it to removable disk(x). 5. After completion of copying, click safely remove hardware in taskbar of your computer to unload. Figure 3-4 10 1. NAND FLASH stor rage device, s space for MID D to store doc cument itself. Content of f MID stor age device 2. TF rem movable memo ory card. 3. The tw your co o above-men omputer with ntioned storag USB. ge devices bo oth can be vi isited through h connection with Attention:

: when your device, yo visit memo MID is con u will canno ory card in M nnected with ot visit the m MID, only di USB cable, memory card isconnect US if you start through MI SB cable. up USB sto ID, if you wa orage ant to 3.7 Mem mory car rd Copy the d document t to storage c card You can tran you want to SD card. nsmit docum see documen ment between nts in MID, o MID and co only click the omputer, such file browser h as music a r to look throu and picture, e ugh content i etc. If in the Delete doc cuments on n the storag ge card of M MID 1. Find do ocument you want to delet te. 2. Press th he document name you ne ed to delete, click in the upper rig ght corner. Removing g storage ca ard when th he MID is i in starting u up state If need to re card firstly, emove storag for fear of fai ge card under ilure or dama r starting up age of the stor state of MID rage card. D, you must u unload the sto orage 1. Pull dow wn the SD ca ard settings m menu and click k to EJECT T. 2. Open S side of System Settin the SD card t ng,click and to uninstall th select the Sto he SD card. orage, and cl lick the icon on the right 11 4 Connection Establishment 4.1 WIFI Connection Your MID can be connected onto Wi-Fi network to connect the operation:

1. On the homepage interface, swipe up to bring up the Meun settings;

2. Click and select the System Setting;

3. Click Wi-Fi and open wi-fi switch;

4. After openingWi-Fi, the searched Wi-Fi network can be scanned automatically from the equipment in the windows on the right. 5. Select the Wi-Fi network required to be connected, if the password is added, pop up the password input windows and input the corresponding password. 6. ClickCONNECT . Click here and select WIFI network Figure 4-1 12 Figure 4-2 4.2 Bluetooth Connection Functions of bluetooth:

1. You can exchange the files between two Bluetooth. You can exchange the files with other computers, mobile phones and pda. 2. You can synchronously exchange pims data with mobile phones, pda and laptop to support the Bluetooth ( data of outlook E-mail address). 3. You can You can exchange the electronic name card with mobile phones, pda and laptop to support the Bluetooth. 4. You can connect the keyboard, mouse and joystick to support the Bluetooth. Application of Bluetooth (Figure 4-3) 1. Setting procedure of entering into Bluetooth: set -> bluetooth set, open the bluetooth 2. Name of equipment: you can randomly change the name of bluetooth for your MID by equipment pressing Menu key. 3. Detect-ability: open this function by clicking the place for name of bluetooth, which indicates that your MID bluetooth can be searched by other bluetooth equipments, this default time for this opening is of 120 seconds. 4. Scan and look for equipment: you can detect the equipment desired to be connected by utilizing this function. 13 5. Bluetooth: after employing the scan to look for the equipment, all bluetooth equipments searched by your MID can display under this function. Click this and open the detectability function Click this scan to search for the equipment Figure 4-3 14 5 Communication 5.1 Camera Camera functions 1. Click and select the camera;

2. The system enters into the camera interface;

3. Click and select the Photo button and easily take the photos;

4. Set such functions as photo sixe, storage location, white balance and focal length 5. After completion of taking photo, there is the display for previewed minimap. regulating;

Figure 5-1 15 Videotape function 1. Click the videotape icon and convert it as video recorder mode;

2. Click and select the videotape button to take video ;

3. Set such setting functions as color effect, white balance and video quality;

4. Click and select the stop button, end the videorecording, and observe the previewed video. Cut Front or Rear Videotape Function Photo function Figure 5-2 6 Other Applications 6.1 File Management Browse files Slide the desktop to locate the Files browser. 16 You can use the files browser to manage, edit and delete the files and folders, or to create sharing and FTP server to achieve resource sharing. Fig. 5-3 Fig. 5-4 17 Cut and copy files 1. In the file browser, press and select the file you want to operate. 2. Pop up operating menus, includingSelect all, Move to, Copy to, Rename, etc. 3. Click Cutand Copy file or folder. 4. Click in corner o nto the file or of the screen r folder you w and select C want to paste opy to .

, and then cli ick the menu in the upper right 5. And the en select the f folder you wa ant to copy to o, and click C Copy to Here e. Delete files 1. In the f file browser, p press the file you want to d delete. 2. Click

. 3. Click D Delete to dele te file. Folder setup p 2. SelectA Add new fold der. 1. In the f file browser, c click on the u upper right me enu button to o pop up the m menu. 3. Click p op-up window w and entern new folder nam me in the text t box. 4. Click C Create Folder r to create the e folder. Quick searc ch 1. In the to oolbar of the file browser 2. Click S Search icon

. 3. Pop up the search pa anel and enter r the keyword ds you need t to find. 4. Click O OK and the se earch progres ss bar will app pear in the no otification bar r. the search is completed, p pop up the d dialog box to confirm wh ether to show w the 5. When t results. 6. Click O OK to show th he search resu ults. 18 FCC Statement:

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by MPS MAYORISTA DE COLOMBIA S.A. may void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR tests are conducted using standard operating positions accepted by the FCC with this product transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of this product while operating can be well below the maximum value. Before a new model product is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for this product are performed in positions and locations as required by the FCC. 1

Safety Tips for Using Your Device Before using this product, please read the following safety information and communicate it to your children, or to whomever is using it. For safety, do not use this product while operating a vehicle. If you are in a location with a medical device, please follow the instructions to turn off the device, if necessary. Turn off the device or activate the Airplane Mode function when boarding an aircraft, to prevent wireless signals from interfering with aircraft controls. Turn the device off when you are near high-precision electronic equipment, otherwise it may cause failure of that equipment. Do not disassemble or remove parts of the device without authorization. Only authorized persons may repair this device. Keep your device away from magnetic equipment. Radiation from the device may erase information contained in magnetic storage devices. Do not use this device in high temperatures or in flammable areas, such as gasoline stations. Keep this device and its accessories out of the reach of children if they are not supervised. Obey relevant laws and regulations when using this device and respect the rights of others and their privacy, Follow the specifications in this manual when using a USB cable, otherwise you can rely on this device or your computer. Always use a nearby, easily accessible power outlet. To prevent possible hearing damage, do not listen at high volume levels for extended periods of time. The memory available to the user may vary depending on the pre-configuration of the device. In the factory preset, the applications to be installed and the operating system version are chosen. Both vary in size and determine the amount of memory available, The Adobe Flash Player is not installed on the tablet. If you want to use Flash content in your browser, you can visit the Android application market ( Play Store ) to search and download the free Adobe Flash Player application. Maintenance Keep the device dry. Avoid contact of the battery and the charger with steam, water or wet hands to avoid corrosion, short circuits or failures. Avoid strong impacts or vibrations on the device, battery and charger. These prevent possible failures, fires or explosions. Do not knock, pull or drill holes in the device and avoid bending it, Always use authorized accessories, otherwise you may lose your product warranty in case of failure. Do not use this appliance in humid environments, such as bathrooms, steam rooms, etc., and avoid splashing or wetting it. and accessories would not be under our company warranty scope. Use an appropriate volume when using headphones. If you feel uncomfortable, turn down the volume or stop using the device. Cleaning Always use special cleaners for LCD pants and to maintain your device. 1.Front camera 2. Screen 3. Rear camera 4. Flash light 5. Type c Port 6. DC port 7. Power button 8. Buttons for volume control +/-

9. Speaker FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Specific Absorption Rate (SAR) information:

This Tablet pc meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA

(FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Tablet has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user's body and the back of the phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

COIN FCC ID: 2AHVR1100AS S/N: 1100AS2011BDD00001 IMEI: 356594850112196 IMEI2: 356594850142797 COIN COMPUTERS,DERECHOS RESERVADOS, HECHO EN CHINA. oe + oh aaa

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHVR-1100AS Label and Location Tablet pc Model No.: 1100AS FCC ID: 2AHVR-1100AS Caution:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Size: L: 4.0cm*W: 4.0cm Label and Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

MPS MAYORISTA DE COLOMBIA S.A. Agent Authorization Company: MPS MAYORISTA DE COLOMBIA S.A. Address: Autop Bog Medellin Km2.5 Parque Emp. Tecnologico, Cota, Colombia Product Name: Tablet pc Trade Mark: Touch+

Model Number(s): 1100AS, Coin 1100AS, Touch+ 1100AS FCC ID: 2AHVR-1100AS We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2020-06-10 Signature:

Name:

Luz Aurora Carrillo Title:

Company: MPS MAYORISTA DE COLOMBIA S.A.

MPS MAYORISTA DE COLOMBIA S.A. Address: Autop Bog Medellin Km2.5 Parque Emp. Tecnologico, Cota, Colombia Tel.: 5718766565 Fax: 5718766610 E-mail: lcarrillo@mps.com.co Date: 2020-12-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, MPS MAYORISTA DE COLOMBIA S.A. hereby authorize Shenzhen Accurate Technology Co., Ltd. to act as a laboratory for testing and test report generation for the following project(s):

(Product description: Tablet PC, FCC ID: 2AHVR1100AS, Model: 1100AS, 1100AS+, AS1100, AS1000+) The chipset SC9832E used in this device for US only supports Bluetooth BDR(GFSK), EDR(/4-DQPSK, 8DPSK) , BLE 1MHz, 2.4G Wi-Fi (2412-2462MHz), GSM 850, PCS 1900, WCDMA Band 2/5, LTE Band 4/7, other functions and frequency bands were disabled by software. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature:

NameLuz Aurora Carrillo TitleLegal Representative

MPS MAYORISTA DE COLOMBIA S.A. Autop Bog Medellin Km2.5 Parque Emp. Tecnologico, Cota, Colombia Tel: 5718766565 E-mail: lcarrillo@mps.com.co Series Models Description Date: 2020/06/10 To: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: 2AHVR-1100AS Dear Sir/Madam, We, MPS MAYORISTA DE COLOMBIA S.A. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only color and model number is different for these model:

Product name:

Model no.:

Tablet pc 1100AS, Coin 1100AS, Touch+ 1100AS Sincerely, Luz Aurora Carrillo Name:

Company: MPS MAYORISTA DE COLOMBIA S.A. Address:

Phone:

E-Mail:

Autop Bog Medellin Km2.5 Parque Emp. Tecnologico, Cota, Colombia 5718766565 lcarrillo@mps.com.co

MPS MAYORISTA DE COLOMBIA S.A. Address: Autop Bog Medellin Km2.5 Parque Emp. Tecnologico, Cota, Colombia Tel.: 5718766565 Fax: 5718766610 E-mail: lcarrillo@mps.com.co Product Similarity Declaration 2020-12-31 To:

Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 Dear Sir/Madam, We, MPS MAYORISTA DE COLOMBIA S.A. hereby declare that we have a product named as Tablet PC (Model: 1100AS, FCC ID: 2AHVR1100AS) was tested by Shenzhen Accurate Technology Co., Ltd., Meanwhile, for our marketing purpose, we would like to list series model (1100AS+, AS1100, AS1000+) on reports and certificate. They have the same circuit, the only difference is model name. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, Signature:

NameLuz Aurora Carrillo TitleLegal Representative

MPS MAYORISTA DE COLOMBIA S.A. Address: Autop Bog Medellin Km2.5 Parque Emp. Tecnologico, Cota, Colombia Tel.: 5718766565 Fax: 5718766610 E-mail: lcarrillo@mps.com.co FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division Date: 2020-12-31 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, MPS MAYORISTA DE COLOMBIA S.A. hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, MPS MAYORISTA DE COLOMBIA S.A. the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature NameLuz Aurora Carrillo TitleLegal Representative QA-FR-170-B

MPS MAYORISTA DE COLOMBIA S.A. Address: Autop Bog Medellin Km2.5 Parque Emp. Tecnologico, Cota, Colombia Tel.: 5718766565 Fax: 5718766610 E-mail: lcarrillo@mps.com.co FCC Confidential Authorization Date: 2020-12-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AHVR1100AS In accordance with Sections 0.457 and 0.459 of the Commissions MPS MAYORISTA DE COLOMBIA S.A. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description Part list/Tune-up procedure (for licensed devices) The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature NameLuz Aurora Carrillo TitleLegal Representative

MPS MAYORISTA DE COLOMBIA S.A. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-06-10 Subject; Request for Confidentiality FCC ID: 2AHVR-1100AS To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Luz Aurora Carrillo Title: /

MPS MAYORISTA DE COLOMBIA S.A. WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2AHVR-1100AS Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-

case basis Other suitable geo-location data based on IP addresses or other reliable source. Signature:

Name / Title: Luz Aurora Carrillo / N/A Phone: 5718766565 Email: lcarrillo@mps.com.co Date: 2020-06-10 Page 1 of 1 Rev.2.0