Congratulations on your new PBX4000BAT Portable Speaker with Built-In Battery By MR DJ General Features:
2-Way 15 Portable Active PA Speaker 2000 Watts P.M.P.O MP3 Player Built-In with LCD Display SD Card Slot, USB Connection Ready FM Radio, Bluetooth Music Streaming 50 oz High Efficiency Mid - Low Woofer 2 KSV Voice Coil 1.35 Titanium Diap. Driver (Tweeter) Speaker RMS:350 Watts Driver RMS:50 Watts 7A,12V Built-in Battery Supports 16GB USB/SD Readers Package Contents:
1 PC Portable Loud Speaker 2 PC Wireless Microphone 2 PC Microphone Holder 1 PC Remote Control 1 PC Power Cord 2 3 4 5 6
(Refer to Page 6 -
1. Default Power Selected is 110v (For Asia / European Market) Please choose correct voltage. Illustration No. 20) 2. Connect power cord to wall outlet then to the back of the unit
(Refer to Page 6 - Illustration No. 18) 3. Plug the Microphone or Guitar into the 6.35mm Input or (Mic Input 1/2)
(Refer to Page 6 - Illustration No. 4) 4. Turn On Wireless Microphone receiver switch to activate Wireless Microphone
(Refer to Page 6 - Illustration No. 14) 5. To control both Microphone A and Microphone B Volume Levels
(Refer to Page 6- Illustration No. 15) 6. Connect Your Selected Audio Source (CD, DECK, MP3 Player, DVD, etc) on LINE IN Input via RCA
(Refer to Page 6 - Illustration No. 7) 7. Turn on the speaker. A green LED will light up to indicate the speaker is on
(Refer to Page 6 - Illustration No. 19.) 8. Monitor LED Charging Indicator (When On - Charging of Unit is Activated)
(Refer to Page 6 - Illustration No. 21) 9. Insert USB or SD Card for MP3 Player (Does Not Support Large Storage Cards - 16GB Max)
- Illustration No. 2) 10. Select the Player Mode to either Bluetooth, USB or MP3 or FM through the selector.
(U - USB or S - SD Card) - (Refer to Page 6 - Illustration No. 1) 11. Set TREBLE, BASS, ECHO, MIC LEVEL, VOLUME controls to equalize the sound.
(Refer to Page 6 - Illustration No. 3/11/12/13) 12. Line-Output Connection via RCA (Refer to Page 6- Illustration No. 8) 13. To use Wireless Remote Control - Remote must have access to the I.R. Receiver
(Located In Front of Speaker) 14. For DC Power Interface Access (Refer to Page 6 - Illustration No. 18)
(Refer to Page 4 7 8