User Instructions MSA LUNAR Order No.: 10214662/00 Print Spec: 10000005196 (EO) CR MSAsafety.com WARNING!
Read this manual carefully before using or maintaining the device. The device will perform as designed only if it is used and maintained in accordance with the manufacturer's instructions. Otherwise, it could fail to perform as designed, and persons who rely on this device could sustain serious injury or death. The warranties made by MSA with respect to the product are voided if the product is not installed and used in accordance with the instructions in this manual. Please protect yourself and your employees by following the instructions. Please read and observe the WARNINGS and CAUTIONS inside. For additional information relative to use or repair, call 1-
800-MSA-2222 during regular working hours. MSA is a registered trademark of MSA Technology, LLC in the US, Europe and other Countries. For all other trademarks visit https://us.msasafety.com/Trademarks. This product incorporates Bluetooth wireless technology. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by MSA is under license. Other trademarks and trade names are those of their respective owners. 1000 Cranberry Woods Drive Cranberry Township, PA 16066 USA Phone 1-800-MSA-2222 Fax 1-800-967-0398 MSA 2020. All rights reserved For your local MSA contacts, please go to our website www.MSAsafety.com EN 1 2 3 Contents Safety Regulations Restrictions Overview LUNAR FireGrid Getting Started 3.1 In the Box Safety and Precautionary Measures 3.1.1 Accessories and Replacement Parts 3.2 Device Overview 4 Basic Operation TIC Display and Connected Device Status Donning LUNAR Powering On and Off 4.2.1 Powering On 4.2.2 Powering Off Menus 4.4.1 Main Menu 4.4.2 Maintenance Menu Activating an Alarm Cancelling an Alarm Pairing with an External Device Configuring and Maintaining 4.8.1 Connecting to FireGrid Configure 4.8.2 Updating Firmware 4.8.3 Charging the Battery 4.8.4 Installing and Removing the Battery 4.8.5 Viewing Device Information 4.8.7 Maintaining LUNAR 4.8.8 Before Each Use 4.8.9 After Each Use 4.8.10 Storing LUNAR 5 Features Starting a Search Searching Overview Canceling a Search Exiting a Search Canceled by the Target Acknowledging a PAR CheckNotification Acknowledging an Evacuate Notification 6 Learn More 6.1 Support 1.1 1.2 2.1 2.2 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 5.1 5.2 5.3 5.4 5.5 5.6 MSA LUNAR 4.8.6 Viewing Battery Level and Device Assignment (Quick Check) 5 5 5 8 8 8 9 9 9 10 11 11 16 16 16 17 20 20 20 21 21 22 23 23 25 26 27 28 28 28 29 29 30 31 31 31 33 34 34 35 36 36 3 6.2.3 Single Point Charger International Input AC Power Plugs 6.2 Specifications 6.2.1 Radio 6.2.2 Ingress ProtectionRating 6.3 Warranty 6.4 Certifications 6.4.1 Certified Temperature Ranges 6.4.2 Declaration of Conformity 6.5 Legal Notices Translated Online Help DownloadPDFs 7 8 EN 36 36 36 36 37 37 37 37 37 38 39 4 MSA LUNAR 1 Safety Regulations Safety Regulations EN 1 US Canada This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the User's authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence qui sont conformes au (x) RSS (s) exempts de licence d'Innovation, Sciences et Dveloppement conomique Canada. L'opration est soumise aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interfrences
(2) Cet appareil doit accepter toute interfrence, y compris les interfrences pouvant provoquer un fonctionnement indsirable de l'appareil 1.1 Restrictions MSA LUNAR is not suitable for the following applications:
Although the thermal imaging camera (TIC) is waterproof, it is unable to take underwater images. Likewise, the camera does not take images through glass, water or shiny surfaces which may reflect infrared light and may appear as a thermal image "mirror". The camera does not improve the user's sight. Corrective spectacles must continue to be worn. Limitations Certified ambient operating temperature range: -25C Tamb +40C. Failure to properly use and maintain this product can result in injury or death. Never substitute, modify, add or omit parts. Use only exact replacement parts in the configuration as specified by the Refer to user instructions in this manual for information on use and maintenance of this device. Refer to user instructions in this manual before donning. This device contains a battery and electronics. Dispose of or recycle in accordance with all applicable federal state and manufacturer. local regulations. WARNING!
1.2 Safety and Precautionary Measures The User must be trained and thoroughly familiar with proper operation and limitations of the device. Use in controlled live-burn exercises is suggested before using the device in actual emergency situations. MSA LUNAR 5 1 Safety Regulations EN Do NOT rely on the device as the sole means of navigation, search and rescue, or alarm of a Target in distress. Do NOT deviate from standard firefighting navigational, search and rescue, or operating procedures and best practices during use. Radio-frequency based search and rescue technology is not a replacement for these procedures. Although the system provides an image in dark and smoky environments, the User may become disoriented or lost in such environments if the system becomes inoperative. If a local alarm network or LTE network interruption occurs, or communication of devices or Cloud connectivity is slowed or prevented, standard firefighting navigational, search and rescue, and operating procedures must be followed. Wireless and Bluetooth Operation is dependent upon signal availability of the wireless service(s) necessary to maintain the communication link. Loss of wireless signal will prevent communication of alarms and other information to linked devices and will prevent the use of LUNAR's search capabilities. Take appropriate precautions in the event a loss of wireless signal occurs. The search functionality is dependent upon the Target of the search having an operational, connected LUNAR device that is powered on, connected through wireless signal on and on the Targets person. If the LUNAR device is not operational, powered on and connected through wireless signal, the Target will not be able to be searched. If the LUNAR device is not on the Targets person, the search function will lead searchers to the LUNAR device rather than the Target. If the LUNAR device does not operate correctly as described in these instructions, remove the LUNAR device from service. Make sure an MSA trained and certified repair technician corrects the unsatisfactory condition before returning the LUNAR device to service. This device is NOT field serviceable. Repair or alteration of the device beyond the procedures described in this manual or by anyone other than a person authorized by MSA could cause the unit to fail to perform properly. Use only genuine MSA replacement parts when performing any maintenance procedures described in this manual. Substitution of components can seriously impair performance of the unit, alter intrinsic safety characteristics or void agency approvals. Before and after each use, inspect the device to determine if servicing is required. Do not use if the device does not power on successfully or if device is bent, cracked, modified or otherwise compromised. Exposure to high temperature environments for an extended period of time may cause degradation or loss of thermal image. Avoid heat saturation or overexposure of the equipment. MSA LUNAR is capable of providing an acceptable image when subjected to an ambient temperature of approximately 120C (248F) for 20 minutes. Exposure to conditions exceeding these may result in deterioration and/or loss of image. If degradation of the thermal image is observed, immediately remove the equipment from the high heat environment and allow it to cool until the thermal image returns to normal; otherwise, the system may become inoperative. DoNOT mark the device with stamps, labels, paint or other method. Use of such markings may interfere with camera use or may constitute a flammability hazard. Do NOT charge LUNAR in explosive atmospheres. Only charge LUNAR and LUNAR battery packs indoors. Only charge the LUNAR battery in temperatures between 0C (32F) and 40C (104F). Only charge LUNAR or LUNAR batteries with the Single Point Charger or Universal Multi-Bay Charger with power supplies provided by MSA at time of purchase. Do NOT use a rechargeable battery charging system, which includes the Single Point Charger or Universal Multi-Bay Charger, power supply and power cords, if any component of the system shows damage. Replace the components if they show cracks or distortion, or if the cord shows damage or wear. Keep LUNAR and rechargeable battery charging system dry. Do NOT disassemble, repair or alter LUNAR or charging system. Do NOT immerse in water or other liquids. 6 MSA LUNAR EN 1 Safety Regulations Do NOT expose the rechargeable battery or charging system to high temperature or heating equipment including, but not limited to, direct sunlight and water heaters. Overheating may cause an explosion. Do NOT drop, crush or puncture the rechargeable battery or charging system. Damage from such occurrences can lead to short-circuit and overheating of the equipment. To prevent electric shock or fire, do not remove the cover or tamper with the case of the power supplies provided in each charging system. There are no user-serviceable parts inside. The power supplies contain hazardous voltages and must not be opened. Do not use if any damage to the power supply is observed, including bent prongs, cracked case, modified or compromised. To avoid the possibility of electric shock, disconnect electric power to the power supply before connecting or disconnecting the power supply to the charger clip or charger bay. POWER SUPPLIES for Universal Multi-Bay Charger: AC Mains voltage must be provided to the power supply by a power supply cord approved tothe national standards in which it will be used. FUSING: Internal fuse for Line is provided in the power supply. A blown internal fuse is an indication of critical condition of circuit component(s). If you suspect a blown fuse, do NOT use the device. Return to MSA for service. Do NOT dispose of batteries in a fire. Batteries can explode. Dispose of in accordance with local regulations and requirements. Do NOT replace the battery with another type of battery. Use only LUNAR battery packs. Use of an incorrect battery type creates a risk of explosion. Do NOT use a rechargeable battery pack that shows signs of damage such as bulging, swelling, leaking fluid, a cracked housing, or broken contacts. Do NOT attempt to open the housing of the rechargeable battery pack. The rechargeable battery pack does not have replaceable cells. Failure to follow these warnings can result in serious personal injury or death. WARNING!/AVERTISSEMENT!
Risk of explosion if battery is replaced with incorrect type. Dispose of used batteries according to instructions. Do not disassemble, short circuit, or dispose of in fire. Failure to follow these warnings can result in serious personal injury or death!
Risque d'explosion si la batterie est remplace par un type incorrect. Dbarrassez-vous des piles usages selon les instructions. Ne pas dmonter, court-circuiter ou ne vous disposer dans le feu. Le non-respect de ces avertissements peut entraner des blessures graves ou la mort!
MSA LUNAR 7 2 Overview 2 Overview 2.1 LUNAR EN MSA LUNAR is a wireless, handheld search and rescue device that includes firefighter-to-firefighter ranging using direction and distance indicators, edge detection enhanced thermal imaging, and cloud connectivity to FireGrid. This device offers accountability and connectivity for SCBA users that are not equipped with telemetry. It can also be utilized independently of an SCBA - providing accountability to all firefighters on-scene. LUNAR is not a substitute for standard techniques and precautionary measures. Users must continue to ensure standard operational processes are observed and maintained while using the device. FireGrid is an easily accessible cloud-based software platform that helps to improve firefighter safety by increasing a departments capability for managing products, people, and processes. 2.2 FireGrid This platform includes the following:
FireGrid Configure (mobile app) FireGrid Monitor (mobile app) FireGrid (web platform) Learn more about FireGrid at msafire.com/connectedfirefighter and safetyio.com. 8 MSA LUNAR EN 3 Getting Started LUNAR comes with the following components:
3 Getting Started 3.1 In the Box LUNAR device LUNAR Battery Single Point Charger LUNAR Quick Start Guide (P/N 10215367) LUNAR Registration Guide (for registering a LUNAR device in FireGrid) (P/N 10215366) 3.1.1 Accessories and Replacement Parts Accessories and replacement parts can be purchased separately at https://us.msasafety.com/. Accessories Product Part Number Description LUNAR Battery 10214756 Retractor 10203941 Replacement Parts Product Part Number Description LUNAR Battery Pack 10204050 Boot 10214762 Quick-Disconnect Swivel 10214763 Charging Products Single Point Charger Product PartNumber Description The LUNAR device's removable, rechargeable power supply. Used to tether LUNAR to an SCBA. See 4.1 Donning LUNAR for more information. Replace battery pack with LUNAR Battery Pack MSA Part Number 10204050. Rubber cover that wraps around the LUNAR device to protect from damage, corrosion or deformation. Used to connect the Retractor to LUNAR so the device can be tethered to an SCBA. NNA 10214758 Allows charging of one LUNAR device. Universal Multi-Bay Charger Europe 10214759 UK 10214760 AS/NZS 10214761 NNA 10214752 Europe 10214753 UK 10214754 AS/NZS 10214755 Allows charging of up to six LUNAR devices at one time. MSA LUNAR 9 3 Getting Started EN 3.2 Device Overview 01 Status 02 ID 03 LTE connection 04 Bluetooth connection 05 Notification banner 06 Battery level 07 Display 08 TIC lens 10 LED 09 'Enter' button. Press to select. 11 'Down' button. Press to scroll. 12 RFIDtag 13 Quick-Disconnect Swivel 10 MSA LUNAR EN 4 Basic Operation 4 Basic Operation 4.1 Donning LUNAR WARNING!
Retractor Components LUNAR can be tethered to an SCBA and Turnout Gear using a Retractor. Ensure LUNAR is securely attached using a tether by following the instructions below for donning LUNAR. If using a tether other than the MSA Retractor, ensure that the tether material and connection method are capable of withstanding the loading and environmental conditions that will be encountered during use. Failure to follow this warning can result in serious personal injury or death. 01 Split D-ring 02 Retractor 04 Swivel Button 05 Swivel End 03 Quick-Disconnect Swivel First, remove the Quick-Disconnect Swivel (03) that comes attached to the bottom of LUNAR:
MSA LUNAR 11 4 Basic Operation EN
(1) Push and hold in the LUNAR Swivel Button
(2) Pull the Quick-Disconnect Swivel (03) to
(04). remove. Then follow the instructions for the applicable SCBA:
Tethering LUNARto a G1 SCBA Tethering LUNARto an M1 SCBA Tethering LUNARto a G1 SCBA
(1) Identify the G1 SCBAshoulder strap webbing loop (07). It sits roughly one inch up the strap tunnel (06) on the Users left-hand side.
(2) Slide the Retractor (02) up the G1 SCBA strap tunnel (06) until the Split D-ring (01) is above the specified stitch. 12 MSA LUNAR EN 4 Basic Operation
(3) From outside of the G1 SCBA strap tunnel (06), secure the Retractor (02) with your right hand.
(4) Reach into the G1 SCBA side access tunnel
(08) with your left hand. At this point, the Split D-ring (01) should be in front of the webbing.
(5) Using two fingers, fold the G1 SCBAshoulder strap webbing until one end can feed between the gap in the Split D-ring (01). MSA LUNAR 13 4 Basic Operation EN
(6) Work the rest of the G1 SCBAshoulder strap webbing through the gap. The Split D-ring (01) should now be fully supported by the specified stitching loop.
(7) Attach the Retractor (02) to the bottom of LUNAR:
(04). LUNAR. a) Push and hold in theRetractor Swivel Button b) Insert the Swivel End (05) into the bottom of Tethering LUNARto an M1 SCBA
(1) Identify the M1 SCBAshoulder strap webbing loop (09). It sits on the Users right-hand side, one loop above the strap adjustment. 14 MSA LUNAR EN 4 Basic Operation
(2) Slide the webbing loop (09) between the gap in the Split D-ring (01) until half of the webbing is within the Split D-ring and half of the webbing is underneath it.
(3) With your right hand, grip the Retractor (02) and pull forcefully to the Users right. With your left, fold the webbing loop (09) under the Split D-ring
(01) until it is able to slide between the gap and within the Split D-ring. Note that the stitching on these loops is robust and can handle the amount of force required.
(4) Flatten out the webbing loop (09) once it is fully contained within the Split-D ring.
(5) Attach the Retractor (02) to the bottom of LUNAR:
(04). LUNAR. a) Push and hold in theRetractor Swivel Button b) Insert the Swivel End (05) into the bottom of MSA LUNAR 15 4 Basic Operation Orienting LUNAR EN The LUNAR device directional search antenna is aligned with the axis of the Thermal Imaging Camera
(TIC). The directional search signal you receive is the signal from the area shown in the thermal image. Long press the Down or Enter button. NOTES:
Installing a charged battery also powers on the device. See 4.8.4 Installing and Removing the Battery. Attempting to power on a LUNAR device with a low battery level results in a flashing Low Battery icon, and LUNAR shuts down. See 4.8.3 Charging the Battery. 4.2 Powering On and Off 4.2.1 Powering On 4.2.2 Powering Off
(1) Open the main menu.
(2) Select SHUTDOWN.
(3) Select YES to confirm shutdown. 16 MSA LUNAR