Table of Content Package Content Tools Requirements
1. 1.1 1.2
2.
2.3 ON/OFF Switch
2.3.1 Switching the ENTR ON 2.3.2 Switching the ENTR OFF
2.5 Default PIN Code 3. 3.1 Changing PIN Code
3.3 Pairing Remote Control
Operated by Knob 3.7
5 5 5 6 6 8 9 9 9 10 10 10 10 11 11 12 12 13 16 17 18 19 20 20 ii ENTR Dead Bolt User Manual 4. Touchpad Reader Changing PIN Code 4.1
Pairing Touchpad Reader Touchpad Reader Master PIN Code 5.
5.2 5.3 5.4 Menu Mode 5.5 Adding Personal User Code 5.6 Open Door 5.7 Lock Door 5.8 Delete Personal User Code 5.9 Delete All Personal User Codes 5.10 Volume Control 5.11 Factory Reset 6. Fingerprint Reader
6.3 6.4
Adjust Date & Time Pairing Fingerprint Reader 6.4.1 Add Master 6.4.2 6.4.3 Set Finger Set PIN Code Unlock the Door 6.5 ENTR Dead Bolt User Manual 21 21 21 21 22 22 22 24 24 24 25 25 25 25 26 26 27 27 27 27 28 29 29 29 30 iii Lock Door
Add User 6.6
6.9 6.10 Delete User 6.11 Enable/Disable User 6.12 Delete all Users 6.13 Add Time Schedule 6.14 Edit Time Schedule 6.15 Volume Control 6.16 Double Security 6.17 Factory Reset 7. Smartphone App
7.2 8.
9. 9.1 General
9.1 Door Unit Charging 10.
10.2 Cases Limited warranty
ENTR Wire-free Charger
Pairing Smartphone
31 31 31 32 33 33 34 34 35 35 36 36 37 37 38 39 39 40 41 41 41 41 42 42 42 45 48 iv 4 ENTR Dead Bolt User Manual 1. 1.1 Package Content 1 2 3 4 9 Base plate & Knob Electrical unit
Panel screw
5 6 7 8
Inside drive adapter
10 Allen key #3 1.2 Tools Requirements
Small Phillips screwdriver Note: Do not use power tools or any excessive force to assemble ENTR parts. ENTR Dead Bolt User Manual 5
Warning
Note:
Knob Knob screw
Wide teeth
Rotate adapter tail piece opposite
6 ENTR Dead Bolt User Manual
Place the Inside drive adapter
power tools. Adapter
Inside drive adapter.
Base plate Note:
Adapter Adapter ENTR Dead Bolt User Manual 7
1 Electrical unit
Panel screw 2
the lock.
Note:
Slider
8 ENTR Dead Bolt User Manual 2. 2.1 ENTR User Interface
Touchpad
Knob
ENTR Dead Bolt User Manual 9 OFF ON
2.3 ON/OFF Switch
ON or OFF. 2.3.1 Switching the ENTR ON
ON verify that the door is shut.
Move the switch to the ON Make sure that the knob is in the zero
blink once.
mode. Note:
ON
ON shut but not locked. 2.3.2 Switching the ENTR OFF
Move the switch to OFF
10 ENTR Dead Bolt User Manual
2.5 Default PIN Code The lock's default factory PIN code is: 1 2 3 4 5 #
Please note:
Only the Code and Mute Warning locked out. Keep your new PIN code in a safe place. ENTR Dead Bolt User Manual 11 3. 3.1 Changing PIN Code Warning 1
2 Press [Code]
3 Type [Default PIN code]
[#]
4
[OK]
5
[New PIN code]
[#]
6
[OK]
7
Reenter [New PIN code]
[#]
PIN codes match
[OK]
New PIN code is set. PIN Code doesn't match
[Error]
Start the process from stage 1. 12 ENTR Dead Bolt User Manual
seconds to complete. 1 Important: Verify that the door is shut and no key is inserted into the
2
3 Press [Cfg]
4
Type [PIN code]
[#]
5 Press [1] or [3]
Press [1] Press [3]
side of the door Press [1]
ENTR on right side of the door Press [3]
ENTR Dead Bolt User Manual 13 6
The lock will carry out the
7
[Cfg] Turn the knob manually to unlock
Push on [Cfg]. The lock will perform lock and then unlock process.
[Manual]
[Cfg] Note:
8 Open the door using the handle.
Note: Do not shut the door. 9 Press [Cfg]
The lock will carry out the Auto
[OK]
Door
Latch
1. Remove the mechanical key from the lock. 2.
14 ENTR Dead Bolt User Manual
[Error]
1. 2. 3. 4.
Slider
ENTR Dead Bolt User Manual 15 3.3 Pairing Remote Control 1 2 Press [Add]
3
Type [PIN code]
[#]
4 Press [1] to add remote control.
[OK]
5
Remote control
16 ENTR Dead Bolt User Manual Pairing OK
[OK]
Remote control unit added. Pairing failed
[OK]
Start the process from stage 1. Notes:
To add more remote control units repeat this procedure.
It is possible to add up to 20 remote control units.
Only authorized dealer can reset a paired remote.
all
1
2 Press [Del]
3 Type [PIN code]
[#]
ENTR Dead Bolt User Manual 17 4
[Del] blinks for 30 seconds. 5 Press [Del]
[OK]
Note: Wall reader and smartphone connected to the ENTR lock will not be deleted.
OFF or ON 1
2 Press [Mute]
3
[Mute]
Notes:
OFF
ON. 18 ENTR Dead Bolt User Manual
to Manual 1
2 Press [M A]
3 Type [PIN code]
[#]
4
[Manual] Notes:
Manual
ENTR Dead Bolt User Manual 19
Turn clockwise or counterclockwise to unlock.
Note:
sides of the ENTR front panel:
Open Lock 20 ENTR Dead Bolt User Manual 4. Touchpad Reader
mounted.
adhesive strip.
1. Release lid screw and open the lid. 2.
3. Notes:
[OK] Important:
ENTR Dead Bolt User Manual 21 5.
To turn the Touchpad Reader ON press [#] for 5 seconds. The reader will perform a
5.2 Pairing Touchpad Reader
1 Touch ENTR lock screen with palm
2 Press [Add]
3
Type [PIN code]
[#]
4 Press [1] to add Touchpad.
[OK]
5 Touch the Touchpad Reader screen
Press [77]
[#]
22 ENTR Dead Bolt User Manual Pairing OK
[OK]
Touchpad Reader added. Pairing failed
[OK]
In wall reader:
Start the process from stage 1.
ENTR Dead Bolt User Manual 23 5.3 Touchpad Reader Master PIN Code 1
Press [11]
2 Enter [New master PIN code]
[#]
[#]
3 Reenter:
[New master PIN code]
[#]
Master PIN code added
[OK] illuminated for 1 second.
Master PIN code not added Red [Error] illuminated for 1 second.
5.4 Menu Mode
[*]
[Master PIN code]
[#]
1 Touch Reader screen with palm
Press [*]
[#]
[Master PIN code]
Press [11]
[#]
2 Enter [Personal PIN code]
[#]
3 Retype:
[Personal PIN code]
[#]
PIN code added
[OK]
PIN code not added Red [Error]
24 ENTR Dead Bolt User Manual 5.6 Open Door 1
2 Press [Personal PIN code]
[#]
Not opening Red [Error]
Not locking Red [Error]
5.7 Lock Door 1
2 Press [1]
[#]
5.8 On wake up: Red LED is turn on and 4 short beeps. 5.9 Delete PIN Code 1
Press [*]
[#]
Press [33]
[Master PIN code]
[#]
2
[Personal PIN code]
[#]
Personal code deleted
[OK]
Personal code not deleted Red [Error]
5.10 Delete all PIN Codes 1
Press [*]
[#]
Press [22]
[Master PIN code]
[#]
2 Enter [Master PIN code]
Reenter: [Master PIN code]
[#]
[#]
Personal PIN codes deleted
[OK]
Note: Master PIN code can not be deleted. Personal PIN codes not deleted Red [Error]
ENTR Dead Bolt User Manual 25 5.11 Volume Control 1
Press [*]
[#]
Press [55]
[Master PIN Code]
[#]
2 Press [2][8] to decrease the volume. Press [#] 5.12 Factory Reset
all Touchpad Reader from the ENTR lock. 1
Press [*]
[#]
Press [99]
[Master PIN code]
[#]
2 Enter [Master PIN code]
[#]
Personal and master PIN codes deleted Personal and master PIN codes not deleted
[OK] illuminated for 1 second.
Red [Error] illuminated for 1 second.
26 ENTR Dead Bolt User Manual 6. Fingerprint Reader
to the wall.
Use 4 screws and screw anchors or
1. screw and open the lid. 2.
for 2 seconds. 3. 4. Press [#] for 5 seconds.
6.3 Adjust Date & Time DEVICE DATE/TIME
--/--/--
DD/MM/YY Enter Date Press [OK]
--/--
12 11 1 24/09/16 12 11 1 10 9 8 7 6 2 3 4 5 10 9 8 7 2 3 4 5 6 11:00 Press [OK]
hh:mm Enter Time Press [OK]
ENTR Dead Bolt User Manual 27 6.4 Pairing Fingerprint Reader This procedure is done via the ENTR lock.
1 Touch ENTR lock screen with palm
2 Press [Add]
3
[#]
Type [PIN code]
4 Press [1] to add the reader.
[OK]
5
Press [OK] for YES or [*] to cancel. PAIR LOCK?
*-NO OK-YES Pairing OK
[OK]
Fingerprint Reader added. LOCK PAIR Pairing failed
Red LED illuminated for 2 seconds. FAILED PAIR NO USERS Note:
28 ENTR Dead Bolt User Manual 6.4.1 Add Master User
two Master Users. Note[*] key to move to standby mode. MASTERNAME JOHN Type in [Master name]
[OK]
6.4.2 Set Finger Blue LED illuminates. ADD USER SET FINGER Press [OK]
SWIPE MASTER #01 JOHN
SWIPE 1ST FINGER
SUCCESS 2nd FINGER 2nd FINGER
6.4.3 Set PIN Code SUCCESS 1ST FINGER ADD USER SET CODE Press [OK]
Type in [PIN Code], ENTER CODE ENTER CODE
******
4-10 digits Press [OK]
Retype [PIN Code]
RETYPE CODE
******
4-10 digits Press [OK]
Matched Codes Mismatched Codes SUCCESS SET CODE FAILED INVALID ENTR Dead Bolt User Manual 29
6.5 Unlock the Door OPTION 1:
and unlock command is sent.
: Red LED is ON.
OPTION 2:
Screen shows user code.
[OK]
Enter your code
USER CODE 23:49 03/01 Note:
FAILED UNLOCK 30 ENTR Dead Bolt User Manual 6.6 Lock the Door
Press [1]
[#]
BATTERY LOW
Touch screen USER CODE MASTER CODE 23:49 03/01 Press [*]
******
23:49 03/01 Enter [Master PIN code]
[OK] or
SETTING USERS ENTR Dead Bolt User Manual 31 6.9 Add User
1 2 3 4 User name added USER #08 JENNIFER SETTING USERS USERS ADD USER 2nd MASTER?
USERNAME JENNIFER Press [OK]
Press [OK]
5 USERNAME EXIST ADD USER SET FINGER
*-NO OK-YES
[OK] to add 2nd Master User or [*] to add a user. Note: This screen will not appear if two Master Users
6 User name added. Type [USER NAME]
[OK]
7 SWIPE SUCCESS SWIPE 1ST FINGER 1ST FINGER 2nd FINGER Same user name.
name. Press [OK] or use [8] or [2] in order to set a code only.
8 9 10 SUCCESS ADD USER SET CODE 2nd FINGER
*-NO OK-YES Press [OK] for YES or [*]
for NO. ENTER CODE ENTER CODE
******
4-10 digits RETYPE CODE
******
4-10 digits Type [CODE]
[OK]
Retype [CODE]
[OK]
Matched codes SUCCESS SET CODE Mismatched codes FAILED INVALID Process did not complete. All data typed in will be erased from memory. 32 ENTR Dead Bolt User Manual 6.10 Delete User Touch screen USER CODE MASTER CODE 23:49 03/01 Press [*]
******
23:49 03/01
[OK] or Enter [Master PIN Code]
SETTING USERS 1 2 3 4 User deleted SETTING USERS Press [OK]
USERS DELETE USER SURE?
DELETED DELETE USER JENNIFER Use [8] or [2] to select user for deletion:
[DELETE USER]
[OK]
*-NO OK-YES
*-NO OK-YES JENNIFER Press [OK]
Note: 6.11 Enable/Disable User Touch screen USER CODE MASTER CODE 23:49 03/01 Press [*]
******
23:49 03/01 Enter [Master PIN Code]
[OK] or
SETTING USERS 1 2 3 User enabled SETTING USERS Press [OK]
USERS ENABLE USER USER ENABLE USER Use [8] or [2] to select user:
[ENABLE USER]
[OK]
JENNIFER Disabled Use [8] or [2] to
Press [OK]
ENABLED
Note: Repeat this procedure to disable a user. ENTR Dead Bolt User Manual 33 6.12 Delete All Users Touch screen USER CODE MASTER CODE 23:49 03/01 Press [*]
******
23:49 03/01
[OK] or Enter [Master PIN Code]
SETTING USERS 1 2 3 4 All users deleted SETTING USERS Press [OK]
USERS DELETE ALL?
SURE?
SUCCESS DELETE ALL Use [8] or [2] to select:
[DELETE ALL]
[OK]
*-NO OK-YES
*-NO OK-YES DELETED ALL Press [OK]
Press [OK]
6.13 Add Time Schedule SETTING USERS Press [OK]
1 6 2 3 4 5 USERS ADD SCHED ADD SCHED CHOOSE DAY SARAH Sun-Sat(1-7) SUNDAY FROM 12:00 Use [8] or [2] to
[OK]
select a user Press 1-7 to choose a day.
1 for Sunday. Enter START
[OK]
Use [8] or [2] to select:
[ADD SCHED]
[OK]
7 SUNDAY TO 13:00 SUNDAY 12:00-13:00
*-No OK-Yes Schedule Saved Enter END
[OK]
Press [OK] for YES or [*]
for NO Notes:
1. 2. Press [* 3. Press [* 34 ENTR Dead Bolt User Manual 6.14 Edit Time Schedule 1 2 3 4 5 SETTING USERS Press [OK]
USERS EDIT SCHED EDIT SCHED SARAH Use [8] or [2] to select:
[EDIT SCHED]
[OK]
Use [8] or [2] to
[OK]
FRIDAY 12:00-13:00
DAY Use [8] or [2] to
[OK]
SUNDAY 12:00-13:00
*-Back OK-Yes Use [8] or [2] to choose the desired schedule to be edited.
[4] for 3 seconds shall delete
6 7 8 9 10 FRIDAY 11:00-13:00
--:mm-HH:MM FRIDAY 12:15-13:00 HH:---HH:mm FRIDAY 12:15-17:00 HH:mm---:mm FRIDAY 12:15-17:45 HH:mm-HH:--
FRIDAY 12:15-17:45
*-NO OK-Yes Use [8] or [2] to
START hour
[6 ] to move to START minutes. Use [8] or [2] to
START minutes
[6 ] to move to the END hour. Use [8] or [2] to
END Use [6 ] to move to the END minutes. Use [8] or [2] to
END minutes
Press [OK] for YES or [*]
for NO. 6.15 Volume Control Touch screen USER CODE MASTER CODE 23:49 03/01 Press [*]
******
23:49 03/01 Enter [Master PIN Code]
[OK] or
SETTING USERS 1 2 3 4 SETTING DEVICE DEVICE VOLUME VOLUME VOLUME SUCCESS Use [8] or [2] to select:
[DEVICE]
[OK]
Use [8] or [2] to select:
[VOLUME]
[OK]
Use [8] or [2] to
MEDIUM or LOW. HIGH LOW Press [OK]
SET VOLUME
ENTR Dead Bolt User Manual 35 6.16 Double Security
Note: able to unlock the door. Touch screen USER CODE MASTER CODE 23:49 03/01 Press [*]
******
23:49 03/01 Enter [Master PIN Code]
[OK] or
SETTING USERS 1 2 3 4 SETTING DEVICE DEVICE 2x Security ENABLE?
2x Security Use [8] or [2] to select:
[DEVICE]
[OK]
Use [8] or [2] to select:
[2 Security]
[OK]
*-NO OK-YES ON Press [OK]
6.17 Factory Reset
including users and paired locks. Touch screen USER CODE MASTER CODE 23:49 03/01 Press [*]
******
23:49 03/01 Enter [Master PIN Code]
[OK] or
SETTING USERS 1 2 3 4 Factory reset SETTING DEVICE DEVICE FACTORY Use [8] or [2] to select:
[DEVICE]
[OK]
Use [8] or [2] to select:
[FACTORY]
[OK]
36 RESET?
SURE?
SUCCESS
*-NO OK-YES
*-NO OK-YES FACTORY Press [OK]
Press [OK]
ENTR Dead Bolt User Manual 7. Smartphone App
System requirements: Android 4.4
. ENTR Dead Bolt User Manual 37 7.2 Pairing a Smartphone This procedure is done via the ENTR lock door unit. 1 Touch the Door Unit screen with
2 Press [Add]
3
Type [PIN Code]
[#]
4 Press [2] to add a smartphone.
[OK]
ENTR will be visible for 5 min. Open the ENTR app and follow the steps described in order to pair the smartphone with the ENTR lock.
A phone can have only one eKey per each lock. ENTR App User Manual is available for download at: www.entrlock.com 38 ENTR Dead Bolt User Manual 8.
a.
Notch 1 2
b. and intermediate part. c. ENTR Dead Bolt User Manual 39
a.
b. 1 c. Reassemble the intermediate part and the
board. d. 2
40 ENTR Dead Bolt User Manual 9. ENTR Wire-free Charger 9.1 General
male connector.
Fully Charged
Charging Mode
9.3 Door Unit Charging
ENTR Dead Bolt User Manual 41 10.
1. 2. electronically. 10.2 Cases
Symptom
Page
code.
1. Verify that you are able to lock and unlock the door
2. Please contact your locksmith 1. 2.
1. Make sure that the mechanical key can operate the lock 2. the cylinder. 3.
1. 2.
Remote Control Symptom
control. 1.
2. to the door unit. 3.
12 12 13 13 6 13 Page 16
16 42 ENTR Dead Bolt User Manual Constant Usage Symptom
whenever I lock or unlock the door.
the door unit. The unit has started to beep constantly.
2. Please consult your locksmith or installer.
expected.
on to reset it.
1.
adjust the door or lock case. 2.
sound occurs.
door or lock case. When i fully open the door the knob is
nearby wall. Fingerprint/Touchpad Reader Symptom
reader.
with the door unit.
1. from both the door unit and the wall reader. 2.
to standby mode. Verify that the wall reader is paired to the door unit by
from both devices when completed. 1. memory. 2. Page 31 20 20 12-19 6 6 Page 22 22 25 25 ENTR Dead Bolt User Manual 43 Symptom
Mobile App Symptom
The ENTR mobile app is disconnected
lock on the app. 1.
approved for ENTR. 2. Refresh the app. 3. Only one phone can connect to ENTR at the same
4.
5.
properly.
recovery. Use your owner password to recover the lock.
a new key.
1. 2.
3. 1. As only one phone can connect to the lock at the same
2.
3.
1. be impacted by the environment. 2.
3.
1. OS for ENTR app. Page 27 30 6 Page 38 38 38 38 38 37 44 ENTR Dead Bolt User Manual LIMITED WARRANTY
Purchaser
Product
Dealer
Defects
component found by Mul-T-Lock to have Defects. This limited warranty does not
warranty relate to products defects only. In order to facilitate the warranty service and enable Mul-T-Lock to determine
not included in this limited warranty. ENTR Dead Bolt User Manual 45
Your key carries a code. Make sure you keep it concealed.
Duplicate keys must be performed by an authorized Mul-T-Lock locksmith on
Keys must be inspected periodically and must be replaced when show physical wear. Cylinders:
cylinder. painted.
Protect the cylinder from dirt & dust.
three months. 46 ENTR Dead Bolt User Manual LEGAL NOTICES Mobile phones
Screws
Normal wear and tear
Trademarks
unauthorised use may be made of these trademarks. No Insurance
of your property. Mul-T-Lock is not an insurance company and does not provide insurance services of any kind.
The Services will not always provide an accurate picture of whether or not assets have
ENTR Dead Bolt User Manual 47 For radio enclosure
receiver is connected.
may void the users authority to operate this equipment.
strictly prohibited. 48 ENTR Dead Bolt User Manual Industry Canada statement:
uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
un minimum de 20 cm de distance entre la source de rayonnement et votre corps. ENTR Dead Bolt User Manual 49