NAULTIVOICE Standard Quickstart Guide MV-ONE All-In-One Wireless Industrial/Sports LCD Display Title Mute Channel Status Signal Strength Battery Level GP rev UP Power /
Menu w~ Down Volume Down USB-C SMA Conference MULTIVOICE, MV-ONE, and the MULTIVOICE marks and logos are each trademarks of MULTIVOICE.
(800)-604-0737 | www.MULTIVOICE.com | MULTIVOICE 2016 | R1.0 2019 Starting the System POWER ON Press and Hold Power / Menu Button For 3 seconds or LCD Menus shows MULTIVOICE Advanced SA Gi Check Connection All Headsets should have 3 bars for signal strength. The first unit On should have a M in the status First Unit On The First Unit ON Links the headsets during startup Any headset can be the first Unit On. eel) First Unit ON Ce 4 =>) NO Select YES for only 1 headset Select NO for all others. Others may skip this question and auto connect. Adjust Microphone Place mic close to mouth 2 finger spaces Rotate to mute Using the Menu Enter the Menu While ON,press the Power/Menu button Ko For 1 seconds Pairing de t= eXe F143 Power OFF Use UP and DOWN arrows to select Charging Use Included USB-C Cables and Wall Charger Plug USB-C cable into the Bottom of the Headset Pulsing Red Light indicates Charging Solid Green Light indicates Charge is complete Menu Options Pairing: Add new headset to your system. follow the LCD prompts. Personalize: Here you can change the title and how many channels are used. Power OFF: You can also power off the headset by holding the Power Button for 8 seconds. Info: FCC info, Warranty Date and service numbers Trouble Shooting Check that one and only one headset has a M in the status area. Stay within range. Check that battery level is above 10%
Turn the beltpack Off then back On again. Product Description The Multi-Voice Radio combines conference communication with wireless radio. This full duplex system allows hands free communication on a secure signal in a comfort-
able all in one headset design Measurements Signal Battery 10 Hour Operation Length: 5.6 in Frequency: 902-928 MHz Temp: -20c +60c Height: 3.0 in Frequency Hopping Spread Spectrum Rechargeable Width: 10 in Output Power: Over 500mW Lithium-polymer Weight: 20 oz Range: Up To 3/4 Mile Line of Sight 2500 mAh Proprietary Encryption UL1642, Compliance to US/CANADA This device complies with part 15 of the FCC rules and with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) This device does not cause harmful interference, and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment not expressly approved by Multi-Voice Radio may void the user's authority to operate the equipment. This Class B digital device complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appa-
reils radio exempts de licence. L'exploitation est autorisee aux deux conditions suiva-
ntes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est suscepti-
ble d'en compromettre le foncti onnement. FCC ID: ALZMV2 IC: 10263A-MV2 Model : MV-ONE