Web Cam Viewer Meye-344 Software Manual www.mivision.com 1 FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.
- Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. INDEX 1. Installation 2. Uninstallation 3. Structure Main structure Structure of each viewer Capture 4. Play Setting Example of setting Play the movie Adjusting FPS, Data or Screen quality 5. Record Record Configuration of Recording, Motion detection, Bi-directional Audio 6. Search Structure of Web Cam Player Play the recorded file Fast search Motion Motion and Fast searching Capture 7. PTZ control PTZ control structure Preset www.mivision.com 2 INSTALLATION Installation Run WebCamViewer1.41_Setup.exe in the CD or downloaded to install Web Cam viewer. Follow the below order. www.mivision.com 3 Uninstallation UNINSTALLATION First, click the Start icon and click program icon. Then, you can find the Uninstall Web Cam viewer icon, and click the Uninstall Web Cam Viewer icon. you click After the Uninstall icon there will be new window. If you want to keep gong click the button, otherwise click the No button. Yes you click After yes button, you can see the right window. It shows the of uninstallation. After all OK process button. progress click www.mivision.com 4 STRUCTURE Main Structure STRUCTURE 1. Main viewer: This is for see the movie. 2. Indication window of connecting status: It shows the camera information when users connect to camera, (IP, connecting status, volume, number of frames) 3. Setup button: This is for setup the each information about camera, connection, and recording status. 4. Control GPIO: This is for control turning lamp on/off and opening/closing of door. 5. PTZ Controller: Control the camera direction. 6. Massage Box: It shows the connected status. 7. On/Off: It shows whether camera is connecting or disconnecting. 8. Buffering Control: It controls Buffering time. (0~5 sec) 9. Channel changing icon:
10. Audio selection:
www.mivision.com 5 STRUCTURE Structure of each viewer Web Cam Viewer is consisted of 4 viewers. CCoonnttrrooll bbuuffffeerriinngg
: Between 0~5sec CCoonnttrrooll vvoolluummee
: Between 0~400 Status of connecting
& number of users Internet connection status Connecting IP Bi-
directional Access right Screen size 2x/1x Volume Data rate display Connected Recording Icon for Fps & data Time Time Recording www.mivision.com 6 STRUCTURE Capture Users can capture a picture while the movie is playing Click the capture button. Then you can see the drawer board. AT the drawer board users can save, print, edit and so on. www.mivision.com 7 PLAY PLAY Setting Before playing the movie you must set all information of camera, IP address, port number, Channel and so on. To access setting menu click the configure button. Then users can see the below window. This is for setting the information that indication window of is related camera. Channel information Input all information about the camera that will users reach. Address window Setting status
((cchhaannggiinngg aauuttoommaattiiccaallllyy)) Configure CH [1]
Configure CH [2]
Configure CH [3]
Configure CH [4]
Setting status
((CChhaannggiinngg aauuttoommaattiiccaallllyy))
- Disconnect
- Admin
- User Save/
Edit/ Add/
Delete button www.mivision.com 8 PLAY Example of camera setting In case of static IP First click the Configure button. Then you can see the below window.. Put into all information about the camera that users want to reach in the Connection Configuration section. Camera name IP address Port User Name& Password PTZ Driver Explanation Set the camera name. Input IP address which is assigned to camera Input Default port
[Default value] root / root (for Admin), guest / guest (for Guest) Select an appropriate protocol for the PTZ camera. www.mivision.com 9 PLAY After putting into all information click the Add button Then you can see the Confirm window. Click the Yes button. After all these process, the added list will be shown in the Address Book section. Note Dont check the IP server. www.mivision.com 10 PLAY In case of Dynamic IP You must set at the Admin_tool, before setting at the Web Cam Viewer configuration.
(Refer to Admin_Tool Manual) IIPP SSeerrvveerr Enable : Use IP Server Disable : Do not use IP Server. SSeettttiinngg aa IIPP sseerrvveerr Input IP Address for IP Server.
(Server IP Address should be a static IP.) Port of Video Server [Decimal] : Input port # for IP server CChhaannggee CClliicckk Apply setting. the changed SSeett tthhee uuppddaattiinngg ppeerriioodd ooff ccaammeerraa IIPP IInnffoorrmmaattiioonn GGeett IInnffoo.. CClliicckk Show current setting of the camera Notice The IP address of camera will be registered automatically into IP server when IP server setting is finished in the Admin tool. www.mivision.com 11 PLAY After setting at the Adimin_Tool about Dynamic IP, click the Configuration button in which Web Cam Viewer main screen. Then you can see the below window. Input all information about the camera that users want to reach in the Connection Configuration section, and check the IP sever. Camera name IP Sever Port User Name& Password PTZ Driver Explanation Set the camera name and it should be matched to the one is registered in admin tool Input IP address of IP server Ex) 164.125.141.12 (IP server which is run by MI.) Input Default port
[Default value] root / root (for Admin), guest / guest (for Guest) Select an appropriate protocol for the PTZ camera. www.mivision.com 12 PLAY After putting into all information click the Add button Then you can see the Confirm window. Click the Yes button. After all these process, the added list will be shown in the Address Book section. www.mivision.com 13 PLAY Play the movie After you register camera information, you can connect the camera and see the movie on Web Cam viewer screen. First check the camera that users want to connect which is in the Address Book list. Second click the OK button. Then the Webcam Viewer Configuration window will be disappeared. Third click the connect icon. www.mivision.com 14 PLAY Adjusting FPS (Frame per Second), Data or Screen quality This mode is for setting transmits frames, bit rate, and image quality that are related the playing the movie. To access this mode click the configuration button and click the MPEG4 Control
(Admin) These buttons make set all value depending on network speed. Maximum Frame Rate: It is for setting the number of frames that is showing on screen per second. Bit Rate/Infra Interval: Network transmits. Set the amount of transmit in order to adopt the network speed.
- Maximum bit rate
- Interval of Y Frame
- Network bit rate Quantization value Control: This is for setting the image quality. Note If you dont have the specific knowledge, we recommend that dont use this function. www.mivision.com 15 RECORD RECORD To record movie just click the Record button. The recording folder will be made automatically.
(Default Folder name: Webcamrecord) This is an indication of recording Recording time Note User can choose the recording fold at the Configuration of Recording, Motion detection, Bi-
directional Audio. www.mivision.com 16 RECORD Configuration of Recording, Motion detection, Bi-directional Audio To access this mode click the configuration button, and then click the Recording, Motion detection, Bi-directional Audio button. This button is for select the folder location. Click the Default the to change button, default value. This button is for applying the set value. Record File name Save Folder: Users can choose the saving folders at here. File Name: Type the name of the file that users will save by yourselves.
(Auto File Name: if users check this function, the file name will be created automatically) Motion Detection/ Bi-audio Admin 1. Encoding Mode: Choosing the encoding mode depend on the situation. 2. Sensitivity of Motion Detection: This is for setting the moving detection sensitivity.
(The Lower value is the more sensitive.) 3. Bi-direction Audio Enable: When users use this function, just check it. Note You can change the setting only when you connect by the authority of Admin. www.mivision.com 17 SEARCH SEARCH Structure of Web Cam Player When users want to open the recorded file, you can not open at the Web Cam viewer, but at the Web Cam player. To access Web Cam player double click the Web Cam player icon. Then users can see the below window. RReettuurrnn ttoo ddeeffaauulltt ssiizzee FFaasstt sseeaarrcchh MMaasskk::
FFaasstt sseeaarrcchh::
EEnnllaarrggeemmeenntt LLiissttss ooff MMaakkee rreedduuccee tthhee ssiizzee ooff ssccrreeeenn.. MMaakkee eennllaarrggee tthhee ssccrreeeenn ssiizzee TTiimmee TTaabbllee Recording time is showing here as a bar. rreeccoorrddeedd ffiilleess tthhaatt eexxiisstt iinn tthhee ssaammee ffoollddeerr FFiinnddiinngg tthhee rreeccoorrddeedd RReeaadd tthhee ppllaayyiinngg ffiillee CCaappttuurree tthhee mmoovviiee aass aa ppiiccttuurree.. WWhheenn yyoouu cchheecckk tthhee LLiisstt::
Call the all sdi files that are exist same folder
*.sdi : video, audio file
*.miv : video fie
*.mia : audio file www.mivision.com 18 SEARCH Play Speed Play, stop status Starting Record time Starting time Ending time Zoom in/out Scale Volume Control You can hear sound when it VIDEO type (NTSC, PAL) Volume Control Nest File Previous File X Speed Play X 2 Speed Play X 1/2 Speed Play Next Frame Previous Frame Stop Reverse Fast Speed Forward Slow Speed Reverse Normal Speed Forward Normal Speed Reverse Slow Speed Forward Fast Speed Forward Stop www.mivision.com 19 SEARCH Play the recorded file To play recorded file click the file open button. Then the file list will be shown. Select the file that users want to open, and then click the open button. The selected file information will be shown on the indication section. Click the play button, the movie will play. www.mivision.com 20 SEARCH Fast search This function is for reducing the searching time, when you search the specific point or movement of core things. First check the Mask as stop the playing. Then there will be a gray section. Second choose the sections that you want to use the quick searching. After choosing, click the play button. Motion If there are any movements, the rectangle color will be changed to red. This is very useful that to know which parts are happening the motion. To use this function click the Motion. www.mivision.com 21 SEARCH Motion and Fast searching. When you choose Mask and Motion, fast search will be operated showing the motions occur area. To use this function click the Mask and Motion. Notice Users must stop the playing movie, when you set the Mask and the Motion. Otherwise it doesnt work. www.mivision.com 22 SEARCH Capture You can capture a picture while movie is playing. Click the Print Screen button. Then the picture will be captured as below. www.mivision.com 23 PTZ (Pin/Tilt/Zoom) PTZ (Pin/Tilt/Zoom) To using the PTZ control converts the PTZ control interface as checking it. CChhaannnneell::
Select channel. the viewers PPaann TTiilltt::
Control the camera direction. PPrreesseett::
This makes the camera move to the set point. FFooccuuss::
Control the focus AAuuttoo PPaann:: ccoonnttrrooll tthhee aauuttoo ppaann LLiigghhtt: control the night light PPoowweerr:: ccoonnttrrooll tthhee ccaammeerraa ppoowweerr oonn//ooffff. PPTTZZIInniitt: initialization PTZ drive ZZoooomm::
It controls Zoom In/out SSppeeeedd::
It controls the PTZ speed. IIRRIISS::
It controls camera lens. the iris of www.mivision.com 24 PTZ (Pin/Tilt/Zoom) Preset When users detect one area more correctly and specially, use this function. Set the one point that users want to see and detect more correctly and specially, then whenever you want to see that point just click the number. The example making the Preset There are two options to make the Preset. One is using the Set and another is Set Start. This option is showing depending on PTZ driver. Using the Set 1. Move the camera that users want to save. 2. Select the number that users want to save. 3. Click the Set button. www.mivision.com 25 PTZ (Pin/Tilt/Zoom) Using the Set Start 1. Select the number to save 2. Click the Start Set button (After you click the Start Set button, it will be changed to End Set) 3. Move the camera one point that users want to save. 4. Click the Stat Set button again. Preset call When users use the Preset function, select the number and click the call button. Then the camera will move to the set point. Preset clear When users want to clear the Preset, select the number and click the Clear button. Then it will be cleared. www.mivision.com 26 Meye314 Video Protocols Network interface Video control Digital In/Out Voice Operation environment Access Serial Technical Specification Input : NTSC / PAL Resolution : 320 X 240, 640 X 240(Optional) Compression : MPEG4, Compression rate : 200 ~ 400:1 Frame rate : Max. 30 frames/sec, Avg. 20 ~ 25 frames/sec Size per frame : 0.5 KB Number of video input : switching 4 channels Number of MPEG4 encoding : 1 channel TCP/IP, HTTP, SMTP, ARP, DNS, PPPoE, ICMP, FTP Ethernet : 10 BASE-T, RJ-45 Image quality(MinQ,MaxQ),frame rates, Intra interval, Bandwidth Opto-isolated 4 inputs, relay 1 output Phone line quality G.726 ADPCM Bi-directional audio : Mic input / Speaker output 0 ~ 50 , 800 mA(in normal 240 mA, Max 800 mA) Basic 10 Clients Maximum more 100 clients(optional) RS-232 1 channel & RS-485 1 channel Mainly used for PTZ control www.mivision.com 27 Meye344 Video Protocols Network interface Video control Digital In/Out Voice Operation environment Access Serial Technical Specification Input : NTSC / PAL Resolution : 320 X 240, Compression : MPEG4, Compression rate : 200 ~ 400:1 Frame rate : Max. 30 frames/sec, Avg. 20 ~ 25 frames/sec Channel 4 MPEG4 encoding each channel 5 frames/sec Size per frame : 0.5 KB Number of video input : simultaneous 4 channels Number of MPEG4 encoding : simultaneous 4 channels TCP/IP, HTTP, SMTP, ARP, DNS, PPPoE, ICMP, FTP Ethernet : 10 BASE-T, RJ-45 Image quality(MinQ,MaxQ),frame rates, Intra interval, Bandwidth Opto-isolated 4 inputs, relay 1 output Phone line quality G.726 ADPCM Bi-directional audio : Mic input / Speaker output 0 ~ 50 , 800 mA(in normal 240 mA, Max 800 mA) Basic 10 Clients Maximum more 100 clients(optional) RS-232 1 channel & RS-485 1 channel Mainly used for PTZ control www.mivision.com 28