|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2018-06-28
|
|
1 2
|
2004-12-28
|
|
1 2
|
Applicant's complete, legal business name |
Murata Electronics North America
|
|
1 2
|
FCC Registration Number (FRN) |
0024753089
|
|
1 2
|
Physical Address |
2200 Lake Park Drive
|
|
1 2
|
Smyrna, Georgia 30080-7604
|
|
1 2
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
t******@siemic.com
|
|
1 2
|
h******@AmericanTCB.com
|
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
HSW
|
|
1 2
|
Equipment Product Code |
2450
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
M******** T********
|
|
1 2
|
Title |
Director of Hardware Engineering
|
|
1 2
|
Telephone Number |
678 6********
|
|
1 2
|
Fax Number |
678 6********
|
|
1 2
|
E-mail |
m******@murata.com
|
|
|
app
s
|
Technical Contact
|
|
1 2
|
Firm Name |
U.S. Technologies
|
|
1 2
|
Name |
L****** A**** F****
|
|
1 2
|
Physical Address |
3505 Francis Circle
|
|
1 2
|
Alpharetta, Georgia 30004
|
|
1 2
|
United States
|
|
1 2
|
Telephone Number |
770-7********
|
|
1 2
|
Fax Number |
770-7********
|
|
1 2
|
E-mail |
l******@ustech-lab.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Frequency Hopping Transceiver |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 | No |
| 1 2 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 | Original Equipment |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | C2PC to substitute amplifier and change/reorganize components.
Power output listed is conducted. Limited Modular Approval (LMA). Approval is limited to OEM installation only. Marketing to the General Public is prohibited. For Mobile operation, the power must be reduced as shown in original application and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For fixed point-to-point operation, the antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 1 2 | Power output listed is conducted. Limited Modular Approval (LMA). Approval is limited to OEM installation only. Marketing to the General Public is prohibited. For Mobile operation, the power must be reduced as shown in this application and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. For fixed point-to-point operation, the antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons. This device must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
US Tech
|
|
1 2
|
Name |
G****** Y******
|
|
1 2
|
S****** M****
|
|
1 2
|
Telephone Number |
770-7********
|
|
1 2
|
Fax Number |
770-7********
|
|
1 2
|
E-mail |
g******@ustech-lab.com
|
|
1 2
|
l******@mm.
|
|