US Tech Test Specification:
Customer:
Model:
7 User's Manual FCC ID: HSW-Z2430 CFR 15, Subpart B and C Cirronet, Inc. ZMN2430 ZMN2430 Series Radio Module ZMN2430 Manual Preliminary Cirronet, Inc. Page 78 of 82 US Tech Test Specification:
Customer:
Model:
FCC ID: HSW-Z2430 CFR 15, Subpart B and C Cirronet, Inc. ZMN2430 Important Regulatory Information Cirronet Zigbee High Power - FCC ID: HSW-Z2430 IC: 4492A-Z2430 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. FCC User Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this device not expressly approved by Cirronet Inc. could void the users authority to operate the equipment. In accordance with FCC requirements of human exposure to radiofrequency fields, the radiating element shall be installed such that a minimum separation distance of 20cm shall be maintained from the user and/or general population. This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numrique de la classe B rpond toutes les exigences de l'interfrence canadienne causant des rglements d'quipement. L'opration est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interfrence nocive, et (2) ce dispositif doit accepter n'importe quelle interfrence reue, y compris l'interfrence qui peut causer l'opration peu dsire. RF Exposure Industry Canada Page 79 of 82 US Tech Test Specification:
Customer:
Model:
FCC ID: HSW-Z2430 CFR 15, Subpart B and C Cirronet, Inc. ZMN2430 ZMN2430 Frequency Selection The ZMN2430 is not frequency agile during run-time, but it can select an unoccupied portion of the spectrum at startup. 2427.5-2432.5 2422.5-2427.5 2417.5-2422.5 2412.5-2417.5 2407.5-2412.5 2402.5-2407.5 ZigBee Channel Nominal Occupied BW 11 12 13 14 The ZMN-2400 series uses a set of channels as defined by the IEEE 802.15.4 / ZigBee standards which span a range from 2405 to 2480 MHz with 5 MHz spacing between channels:
Center Frequency (MHz) Designator The channel mask is the name used to describe the list of frequency channels that a ZMN-2400 can use. The default channel mask for client radios allows them to operate on any frequency from 2405 to 2475 (channel 2480 is reserved for manufacturing test purposes and therefore not included). 2405 2410 2415 2420 2425 (default) 2430 2435 2440 2445 2450 2455 2460 2465 2470 2475 2480 NOT USED 15 16 17 18 19 20 21 22 23 24 25 2432.5-2437.5 2437.5-2442.5 2442.5-2447.5 2447.5-2452.5 2452.5-2457.5 2457.5-2462.5 2462.5-2467.5 2467.5-2472.5 2472.5-2477.5 2477.5-2482.5 26 Page 82 of 82