G-BOOM G-BOOM WIRELESS BOOMBOX Rugged Construction Rechargeable Battery USB Device Charging Welcome to G-PROJECT Thanks for purchasing a G-BOOM and joining the G-Project. With just the right combination of performance, durability, features, and style at the right price, our goal is to provide rugged speakers and accessories that t your modern lifestyle. We hope you agree. For more info, please visit our website at www.enterG-project.com PACKAGE CONTENTS:
G-BOOM Wireless Boombox AC Power Adapter 3.5mm Line In Audio Cable User Guide WIRELESS BOOMBOXG-BOOM G-BOOM IMPORTANT SAFETY NOTIFICATIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning ash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance. NOTE: Any unapproved changes or modications will void the warranty. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modications to this equipment may cause harmful interference unless the modications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modication is made. ATTENTION: POUR VITER LES CHOC LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQUAU FOND. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Compliance information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. WIRELESS BOOMBOXG-BOOM G-BOOM SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. SAFETY PRECAUTIONS newspapers, table-cloths, curtains, etc. objects, such as vases, away from this unit and AC/DC adaptor. a. Do not expose this unit or the AC/DC adaptor to dripping or splashing water. Keep liquid-filled b. Only use attachments / accessories specified by the manufacturer. c. Ensure that the AC/DC adaptor is easily accessible. d. Please note the information printed underneath the unit. e. Do not impede the ventilation of this unit by covering the ventilation openings with items such as f. Keep open ames, such as lighted candles, away from this unit. g. Do not place this unit in closed bookcases, racks, or other spaces without proper ventilation. h. Unplug this unit during lightning storms or when unused for long periods of time. i. This unit contains a built-in rechargeable battery. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities. j. Do not expose the battery to ames or dispose of it in a re LOCATION OF CONTROLS 1. Power Button 2. Bluetooth (Pair) Button 3. EQ Button 4. Reverse Button 5. Play / Pause Button 6. Forward Button 7. Volume Down Button 8. Volume + Up Button 1 2 3 4 5 6 7 8 WIRELESS BOOMBOXG-BOOM G-BOOM 9. Power LED (White) 10. Charging and 11. Bluetooth LED (Blue) Low Battery LED (Red) 12. DC Power Input 13. USB Port 14. 3.5mm Aux input 15. Reset Button FRONT BACK 9 10 11 12 13 14 15 INDICATORS BLUETOOTH LED When Bluetooth is in pairing mode, the Bluetooth LED will ash blue. Once Bluetooth has paired successfully, the Bluetooth LED will turn solid blue. POWER / CHARGING LED The red and white LEDs indicate the following statuses:
Power Adapter Battery Power White LED Red LED Connected Connected Connected Connected Not Connected Full Not Full Full Not Full Not Full Not Connected Low Not Connected Empty OFF OFF ON ON ON ON OFF OFF OFF ON ON ON ON OFF OFF ON OFF ON OFF Flash OFF Status
--
Battery charging
--
Battery charging Using battery power Battery low Power off, Cannot power on WIRELESS BOOMBOXG-BOOM G-BOOM INDICATORS (cont) The white LED ashes under following statuses:
Play/Pause Button on G-Boom is pressed Forward Button or Reverse Button on G-Boom is pressed Volume Button on G-Boom is pressed EQ Setting indication NOTE: The Forward and Reverse Button do NOT function when playing music through Line-in. EQUALIZER (EQ) There are 3 EQ presets: EQ1 = Flat, EQ2 = Rock, EQ3 = Pop Press the EQ Button repeatedly to cycle through them. The white LED will ash 1, 2 or 3 times when the EQ Button is pressed to indicate preset EQ1, EQ2 or EQ3 respectively. NOTE: The default setting is EQ1 (Flat) POWER SOURCE Connect the supplied AC adaptor (DC 12V 2A) to the DC In jack on the back of your G-BOOM and plug the other end into a standard wall outlet (100~240V 50-60Hz). NOTES: Disconnect both ends of the power cord when not in use. Use only the supplied AC adaptor with the following specs: AC In - 100-240V AC, 50/ 60Hz / DC Out - 12V 2A. GETTING CHARGED UP For rst time use, charge the unit for about 6 hours. After the initial charge, it takes up to 3.5 hours to charge. Fully charged battery can operate for about ??? hours AC outlet NOTES:
The battery is internal and cannot be replaced Actual battery life varies with use, settings, and environmental conditions Rechargeable batteries have a limited number of charge cycles Charge the rechargeable battery at least biannually AC adapters plug WIRELESS BOOMBOXG-BOOM G-BOOM BLUETOOTH OPERATION You can stream audio wirelessly to your G-BOOM from up to 33 away using your iPhone, iPad, iPod, Android, laptop or other A2DP Bluetooth enabled device. 1 Press the Power Button to turn on your G-BOOM. 2 Then press the Pair Button. The blue LED on your G-BOOM will ash. 3 Turn on your A2DP Bluetooth device and enable Bluetooth. 4 Search for Bluetooth devices and select G-BOOM. If asked for a password, enter 0000. 5 The Blue LED on your G-BOOM will change from ashing to solid, indicating that your Bluetooth device is connected to your G-BOOM NOTE: Press and hold the Pair Button for 3 seconds to disconnect the Bluetooth connection. Your G-BOOM will return to pairing mode and the Blue LED will ash. RECONNECTING YOUR BLUETOOTH DEVICES Once your Bluetooth device has been paired with your G-BOOM, it is simple to reconnect them. 1 Make sure that your G-BOOM is powered on and within range. 2 Select G-BOOM from the list on your Bluetooth device. 3 The Blue LED on your G-BOOM will change from ashing to solid, indicating that your Bluetooth device is reconnected to your G-BOOM NOTES: For best audio performance, turn the volume on your Bluetooth source device all the way up. Your G-BOOM can only play audio from one source at a time. If your G-BOOM is connected to a Line In source, the Bluetooth will not function. Simply unplug the 3.5mm Line In audio cable and press the Pair Button to switch to Bluetooth (if necessary, select G-BOOM on your Bluetooth device). WIRELESS BOOMBOXG-BOOM G-BOOM LINE IN CONNECTION You can also play audio from other devices using the included 3.5mm Line In Audio cable. 1 Press the Power Button to turn on your G-BOOM. 2 Insert one end of the 3.5mm audio cable into the Line In jack on the back of your G-BOOM. Insert the other end of the 3.5mm audio cable into the Line Out or headphone jack of your external audio device (e.g. iPad, iPod shufe, mobile phone, MP3 player, 3 digital media player, etc.) NOTE: For best audio performance and minimal distortion, avoid turning the volume on your audio source all the way up. USB CHARGING PORT This unit includes a USB port placed on the rear. The USB port supports powering and charging most devices including iPhones, iPads, iPods, E-readers, digital cameras and more. (USB cable sold separately). TROUBLESHOOTING Issue Distortion Not loud enough Intermittent sound Cannot play audio via Bluetooth Solution Lower the volume on your G-BOOM and/or audio source Turn up the volume on your G-BOOM and/or audio source Recharge the batteries using the included Power Adapter If using Bluetooth, move the audio source and G-BOOM closer together
(within the 33 range) Unpair G-BOOM from your Bluetooth device (check with your device manufacturer for more information about Bluetooth pairing), then re-pair following the steps in the section BLUETOOTH OPERATION Conrm your device is A2DP Bluetooth compatible. Ensure that both your Bluetooth device and G-BOOM are not connected to any other devices If your G-BOOM is connected to a Line In source, the Bluetooth will not function. Unplug the 3.5mm Line In cable and press the Pair Button to switch to Bluetooth Unpair G-BOOM from your Bluetooth device (check with your device manufacturer for more information about Bluetooth pairing), then re-pair following the steps in the section BLUETOOTH OPERATION SPECIFICATIONS Class 2 Bluetooth Ranges ..............................................................................................33ft (10m) Supported Bluetooth prole.................................................................................................. A2DP Power.............................................................................................................. 2 x 9W <10% THD Battery.......................................................................... 7.4V, 1500mAh, Rechargeable Li-Polymer Battery Playback Time.......................................................................................... Up to ??? hours Battery Recharging Time ............................................................................................ ~ 3.5 hours Power Adaptor AC Input ................................................................................. 100-240V 50-60Hz Power Adaptor DC Output .................................................................................................12V 2A USB Jack DC Power Output ................................................................................................5V 1A NOTE: Specication are subject to change without notice. For further assistance, please visit our website at www.enterG-project.com or contact customer service at support@enterG-project.com or 1-855-896-1795 Life Lab International Ltd.