FCC ID: AUIG850 Bluetooth Wireless Boombox

 

DO NOT PRINT

THIS PAGE

BLUETOOTH WIRELESS BOOMBOX

Bluetooth

Wireless

Rechargeable

Battery

FM Radio

DSS Dual Speaker

Stereo

G-850

Welcome to G-PROJECT

Thanks for purchasing G-BOOM3 and joining G-Project. For more info,

please visit our website at www.gprojectgear.com

™

BLUETOOTH WIRELESS BOOMBOX

SPECIFICATIONS

Power Adapter AC Input .................................................................................. 100-240V ~ 50/60Hz

Power Adapter DC Output ................................................................................................ 12V 1.5A

Output Power ...................................................................................................... 2 x 10W <1% THD

Battery .................................................................................... 7.4V, 2000mAh, Rechargeable Li-Ion

Battery Recharging Time .................................................................................................... 2.5 hours

Battery Playback Time.................................. Up to 8 hours (varies by volume level and audio content)

Bluetooth specification .............................................................................................................. v5.1

Supported Bluetooth Profile...................................................................................................... A2DP

Range..............................................................................................................33ft (10m) line of sight

BLUETOOTH:

RADIO:

Frequency range (FM) .............................................................................................. 87.5 ~ 108 MHz

Specifications are subject to be updated without notice.

PACKAGE CONTENTS:

• G-BOOM3 Bluetooth Wireless Boombox

• AC Power Adapter

• User Guide

LOCATION OF CONTROLS

1. Power ON / OFF Button

6. FM Radio

4. Bluetooth PAIR Button

9. Tune Up Button

7. Tune Down Button

8. Play / Radio Preset Button

2. EQ Button

3. DSS Button

5. LCD Display

1

2 3 4

5

6 7 8 9

BLUETOOTH WIRELESS BOOMBOX

14. DC IN Jack

15. Reset Button

16. LINE-IN Jack

10. LED Ring

11. Volume + Up Button

12. Volume – Down Button

13. LED Charging Indicator

11

10

13

12

14

15 16

POWER SOURCE

Connect the supplied AC adapter (DC 12V 1.5A) to the DC IN Jack on the back of

G-BOOM3 and plug the other end into a standard wall outlet (100~240V 50-60Hz).

NOTES: Disconnect both ends of the AC adapter when not in use. Use only the supplied

AC adapter with the following spec: AC In - 100-240V AC, 50/ 60Hz / DC Out - 12V 1.5A

RECHARGE BATTERY

Connect the supplied AC adapter to the DC IN Jack on the

back of G-BOOM3 and plug the other end into a standard wall

outlet to being automatically recharging the built-in battery. The

red LED charging light on G-BOOM3 will illuminate to indicate

charging process and turn off when the battery is fully charged.

AC outlet

AC adapter

WHEN TO RECHARGE BATTERY

When G-BOOM3 battery is low, the red LED Charging indicator will begin flashing

to warn you to recharge your G-BOOM3 for continued use and enjoyment.

NOTES

• The battery is internal and cannot be replaced

• Actual battery life varies with use, settings, and environmental conditions

• Rechargeable batteries have a limited number of charge cycles

• Charge the rechargeable battery at least biannually

BLUETOOTH WIRELESS BOOMBOX

EQUALIZER (EQ)

There are 3 EQ presets:

EQ1 = (Default) Dynamic: full bass and crisp high frequencies.

EQ2 = Deep: Added emphasis on bass and low mids frequencies.

EQ3 = Bright: Added emphasis on mids, vocals and high frequencies.

Press the EQ Button repeatedly to cycle through them. The LED ring will flash

1, 2 or 3 times when the EQ button is pressed to indicate preset EQ1, EQ2

or EQ3 respectively.

CHANGING THE INPUT SOURCE

When the G-BOOM3 powers “ON”, the default audio input source is Bluetooth.

To switch to Radio, press the FM Radio button once and G-BOOM3 will enter FM

Radio mode.

NOTE: If inserting audio cable into the Line-In Jack, G-BOOM3 will change to Line-In mode

automatically regardless of the current input source.

PLAYING THE RADIO

1 With G-BOOM3 powered “ON”, press the FM RADIO button. The current

FM station and FM icon will appear on the display.

2 For manual tuning, repeatedly press the TUNE UP or TUNE DOWN button to

manually adjust the tuning on the LCD display until the desired station appears.

3 For auto tuning, press and hold the TUNE UP or TUNE DOWN button until the

display starts to scan, then release the button. The tuner will search and stop on

the next strongest station signal it finds. Repeat this process until the desired

station appears on the LCD display.

NOTES: G-BOOM3 features a built-in internal FM antenna. For best reception please place

the unit close to window or open area to improve reception quality. Keep digital music

players or mobile phones away from G-BOOM3 as this may cause interference. Do not place

G-BOOM3 near the AC power adapter as this may lead to reception interference.

BLUETOOTH WIRELESS BOOMBOX

SETTING RADIO PRESETS

1 To preset a radio station to memory, first follow the previous steps to tune in the

desired station.

2 Press and hold the PLAY / RADIO PRESET button to create a preset for the

current station. “P” will appear and “##” (the preset number) will blink on the

LCD display.

3 Press the TUNE UP or TUNE DOWN button to select a preset number (01- 10).

Press the PLAY / RADIO PRESET button again to confirm the setting and the

station will be saved into memory.

4 Repeat these steps for up to 10 presets, as desired.

5 To recall a preset station, repeatedly press the PLAY / RADIO PRESET button

until the desired preset number appears in the display and the station tunes in.

NOTES: Saving a new station preset in the same position as a previously saved station

will replace the previously stored station for that preset number.

BLUETOOTH OPERATION

You can stream audio wirelessly to G-BOOM3 from up to 33’ away using your

iPhone, iPad, iPod, Android, laptop, or other A2DP Bluetooth enabled device.

1 Press the POWER ON/OFF button to turn on G-BOOM3.

2 The speaker will be entered to Bluetooth mode. The LED ring will flash blue

and Bluetooth icon will light up on the LCD display. .

3 Turn on your compatible A2DP Bluetooth device and enable Bluetooth.

4 Search for Bluetooth devices and select “G-BOOM3”.

5 The blue LED ring will change from flashing to solid, indicating that your

Bluetooth device is connected to G-BOOM3.

NOTES:

• Press and hold the Bluetooth PAIR button for 3 seconds to disconnect the current

Bluetooth connection.

• The unit will return to pairing mode and the blue LED ring will flash.

•

If asked for a password, enter “0000”.

BLUETOOTH WIRELESS BOOMBOX

RECONNECTING YOUR

BLUETOOTH DEVICES

Once your Bluetooth device has been paired with G-BOOM3, it is simple to

reconnect them.

1 Make sure that G-BOOM3 is powered on and within range.

2 Select “G-BOOM3” from the list on your Bluetooth device.

3 The blue LED ring will change from flashing to solid, indicating that your

Bluetooth device is reconnected to G-BOOM3.

NOTES:

• For best audio performance, turn the volume on your Bluetooth source device all the

way up.

• G-BOOM3 can only play audio from one source at a time. If G-BOOM3 is connected to

a LINE IN source, Bluetooth will not function. Simply unplug the 3.5mm LINE IN audio

cable and press the Bluetooth PAIR button to switch to Bluetooth (if necessary, select

“G-BOOM3” on your Bluetooth device).

DSS (DUAL SPEAKER STEREO)

With DSS, you can connect two G-BOOM3s together to stream in stereo to both at

the same time to enjoy music with double the power and expanded stereo separation.

1 Power on two G-BOOM3 speakers and switch both to Bluetooth mode.

2 Follow directions to pair and connect a Bluetooth device to one G-BOOM3 (master)

3 Press DSS button on the master G-BOOM3 speaker which is already connected

Bluetooth device to enter DSS mode, the LED ring will flash amber.

4 Press DSS button on the other G-BOOM3 speaker to enter DSS mode, the LED

ring will flash amber indicating. When the two speakers are connected, the amber

LED ring will change from flashing to solid.

5 To disconnect the DSS, press the BLUETOOTH PAIR button on one G-BOOM3.

6 Repeat the above steps to re-connect the two G-BOOM3.

NOTES:

- DSS mode require two G-BOOM3 speakers.

- You need to connect a Bluetooth device to the master speaker before you enter DSS mode.

- After connected the two speakers, the volume level in these two speakers will be synchronized.

and the EQ can be individually set for each speaker.

- If you cannot connect two speakers successfully, press and hold the DSS button for 3 seconds on

both G-BOOM3 to reset memory and then repeat the above steps to connect two speakers again.

- Only Bluetooth can work with DSS. Radio and LINE-IN does not work with DSS.

BLUETOOTH WIRELESS BOOMBOX

AUX-IN CONNECTION

You can also play audio from other Line-In digital sources using a standard 3.5mm

Line-In audio cable (sold separately).

1 Press the POWER ON/OFF button to turn on G-BOOM3.

Insert one end of the 3.5mm audio cable into the Line-In jack on the rear of

2

G-BOOM3.

3

player, etc.)

Insert the other end of the 3.5mm audio cable into the Line-Out or headphone jack

of your external audio device (e.g. iPad, mobile phone, MP3 player, digital media

4

Input source will be switched to LINE-IN mode automatically. LINE-IN icon will

appear on the LCD display.

5 Select the music you wish to listen to on your external audio device then press play

and sound will be projected through G-BOOM3 speakers.

NOTE: For best audio performance and minimal distortion, avoid turning the volume all the way

up on your external audio source.

1 Power on two G-BOOM3 speakers and switch both to Bluetooth mode.

2 Follow directions to pair and connect a Bluetooth device to one G-BOOM3 (master)

3 Press DSS button on the master G-BOOM3 speaker which is already connected

Bluetooth device to enter DSS mode, the LED ring will flash amber.

4 Press DSS button on the other G-BOOM3 speaker to enter DSS mode, the LED

ring will flash amber indicating. When the two speakers are connected, the amber

LED ring will change from flashing to solid.

5 To disconnect the DSS, press the BLUETOOTH PAIR button on one G-BOOM3.

6 Repeat the above steps to re-connect the two G-BOOM3.

NOTES:

- DSS mode require two G-BOOM3 speakers.

- You need to connect a Bluetooth device to the master speaker before you enter DSS mode.

- After connected the two speakers, the volume level in these two speakers will be synchronized.

and the EQ can be individually set for each speaker.

- If you cannot connect two speakers successfully, press and hold the DSS button for 3 seconds on

both G-BOOM3 to reset memory and then repeat the above steps to connect two speakers again.

- Only Bluetooth can work with DSS. Radio and LINE-IN does not work with DSS.

ONE-YEAR WARRANTY

Life Lab International Ltd. (hereafter referred to as Life Lab), warrants this product to be free from defects in workmanship

and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. If you are

experiencing any problems with the operation or function of your product, please make sure you have reviewed our full

owners manual from our website for reference or email us at support@gprojectgear.com for additional troubleshooting

assistance. Should this fail to resolve the matter and service is still required by reason of any defect or malfunction during

the warranty period, Life Lab will repair or, at its discretion, replace this product without charge. This decision is subject to

verification of the defect or malfunction upon delivery of this product to a designated factory service center. The product

must include proof of purchase, including date of purchase. Before returning this product for service:

1. Contact customer service to receive a Return Authorization number (RA#).

2. Pack the unit in a well padded, heavy corrugated box.

3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of original date of purchase,if within

the warranty period.

4. Write issued RA# on the top of shipping box.

5. Ship the package from shipping company of your choice, prepaid and insured, to the Life Lab Service Center address

supplied by the Customer Service Representative. Be sure to save your tracking number

Disclaimer of Warranty:This warranty is valid only if the product is used for the purpose for which it was designed. It does

NOT cover: (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have

been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat;

(iii) damage to digital media players; (iv) the cost of shipping this product to the Consumer Repair Department.

This warranty is valid only in the United States of America and does not extend to owners of the product other than to the

original purchaser. In no event will LifeLab or any of it’s affiliates, contractors or resellers, their officers, directors,

shareholders, members, or agents be liable to you or any third party for any consequential or incidental damages, any

lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or

exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal

rights, and you may also have other rights which vary from state to state. Your acknowledgment and agreement to fully

and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of

currency (money order, cashier’s check, or credit card) for purchase of your G-Project product.

BLUETOOTH WIRELESS BOOMBOX

FAQs

Q: Why can I not pair my Bluetooth device?

A: Occasionally the Bluetooth may need to be reset on your G-BOOM3, and/or your

Bluetooth streaming device(s).

First you will need to go into the Bluetooth settings menu on your audio streaming device

and delete / 'forget this device' from the list completely.

Next you will need to clear the Bluetooth memory on your G-BOOM3 which can be done

by pressing and holding the Bluetooth PAIR button for 3 seconds or until the blue LED

starts blinking, indicating that G-BOOM3 is searching for a compatible Bluetooth device.

Now with your Bluetooth streaming device and G-BOOM3 both powered on, try searching

for compatible devices under the Bluetooth settings menu of your audio streaming device.

After a few seconds it should detect G-BOOM3, at which time you can select “G-BOOM3”

and establish a new connection.

Q: Why do I not hear any music?

A: Make sure that a 3.5mm Line-In cable is not plugged into the Line-In jack of G-BOOM3

as this will automatically switch the unit to LINE-IN even if there is no external audio device

connected.

Q: How can play my G-BOOM3 as loud as possible?

A: When using Bluetooth or LINE-IN as the audio source, the volume of playback depends

on both the volume that G-BOOM3 is set to as well as the volume on your connected

device. To play at the loudest volume, please turn the volume up on both G-BOOM3 and

your connected device. Note that with LINE-IN playback, maximizing the volume may

cause distortion during playback.

IMPORTANT SAFETY NOTIFICATIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol,

within an equilateral triangle is intended to alert the user to the presence

of uninsulated dangerous voltage within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock to persons.

ATTENTION: The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

NOTE: Any unapproved changes or modifications will void the warranty.

BLUETOOTH WIRELESS BOOMBOX

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Compliance information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power

surges ARE NOT covered under warranty for this product.

WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING: The mains plug is used as a disconnect device, the disconnect device shall remain readily operable.

IMPORTANT SAFETY INSTRUCTIONS

Some of the following information may not apply to your particular product; however, as with any electronic

product, precaution should be observed during handling and use.

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all Instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. When the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

BLUETOOTH WIRELESS BOOMBOX

ADDITIONAL SAFETY PRECAUTIONS

a. Do not expose this unit or the AC/DC adapter to dripping or splashing water. Keep liquid-filled objects,

such as vases, away from this unit and AC/DC adapter.

b. To ensure that this unit is completely disconnected, unplug it from the wall.

c. Ensure that the AC/DC adapter is easily accessible.

d. Please note the information printed underneath the unit.

e. Batteries should not be exposed to excessive heat such as direct sunshine, fire, etc.

f. Do not impede the ventilation of this unit by covering the ventilation openings with items such as

newspapers, table-cloths, curtains, etc.

g. Keep open flames, such as lighted candles, away from this unit.

h. Do not place this unit in closed bookcases, racks, or other spaces without proper ventilation.

i. Use only the same or equivalent type batteries as there is a danger of explosion if the incorrect batteries

are used or they are installed incorrectly.

j. Dispose of batteries properly according to environmental regulations

G-PROJECT is a registered trademark of Goodhatch, LLC.

G-BOOM3 is distributed by

LifeLab International LLC • 3471 North Union Drive, Olney, IL 62450 • (855) 896-1795

The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Life Lab International LTD. is under license.

Other trademarks and trade names are those of their respective owners.



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MUSICAL ELECTRONICS LIMITED Flat H, J, K, 12/F., World Tech Centre, 95 How Ming Street, Kwun Tong, Kowloon, Hong Kong Tel: 2341 9281 Fax: 2341 9964 Attention: Certification reviewer RE:

Request for Confidentiality FCC ID: AUIG850 To Whom It May Concern:

Ed Permanent Confidentiality Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

[V1 Schematics lock Diagrams Operational Description L Tune-up Procedure

|_|] Parts List

[_] Internal Photos (see note) L_] Users Manual (see note) M

Note 1:

Note 2:

Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the users manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required:

1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential.

[M Short-term Confidentiality Request to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request MUSICAL ELECTRONICS LIMITED Flat H, J, K, 12/F., World Tech Centre, 95 How Ming Street, Kwun Tong, Kowloon, Hong Kong Tel: 2341 9281 Fax: 2341 9964 for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant Schematics Block diagrams Operational Description Tune-up Procedure Parts List Test Setup Photos xternal Photos Internal Photos Users Manual LIOOOOO EE Rationale for request for confidentiality:

We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.

[Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, folad Z5 Signature Name of the applicant/grantee contact of FCC: Richard Leung Title: Vice President Innovation & Technology Date: 8" January, 2021

 

 

MUSICAL ELECTRONICS LIMITED Flat H, J, K, 12/F., World Tech Centre, 95 How Ming Street, Kwun Tong, Kowloon, Hong Kong Tel: 2341 9281 Fax: 2341 9964 8" January, 2021 Federal Communications Commission 445 12" Street SW Washington, DC 20554 Subject: Limited Agency Agreement Musical Electronics Limited FCC ID: AUIG850 To Whom It May Concern:

We, Musical Electronics Limited, hereby authorize Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number AUIG850 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is 8" January, 2021. The Limited Agency Agreement expires on 7" January, 2022, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, By: / ho a Signature Richard Leung Printed Name Vice President Innovation & Technology Title