Table of Contents Precaution....2 Preparation..4
Standard accessories....4
Parts Names & Functions.....5
System requirements........6
Technical Specifications6 Use on iOS/Android Device by Wifi.7
Download App.....7
Connect to iOS/Android Device....8
Preview.....11
App Icon Definitions12
Change Password13
Setup Date/Time14
Delete a Microscope15 Install the microscope to Stand.....16 How to get focus19 Install Software on PC..20 Start Microscope.21 Software functions..22
Capture Photo...22
Capture Video...22
Timer..23 Calibration and Measurement....24
Calibration..24
Measurement28
Change Calibration....28
Draw and text32 Software Interface Instructions.....33 1
Main Interface Icons....33
Main Menu.34
Options..35
Capture..36
Measurement Interface Instruction37 Welcome Thank you for your choice of our product - it is a high-tech while easy to use Wifi Digital Microscope. With this unit you will see a unique and bigger world via iOS/Android devices. Its easy to zoom in on stamps, coins, paper currency, plants, insects, skin, fabrics, rocks and minerals, and so much more. We recommend reading this manual first to get the best out of this unit. 1. Precaution Before using the Wifi Digital Microscope, please ensure that you read and understand the safety precautions described below. Always ensure that the Wifi Digital Microscope is operated correctly.
The Microscope is not waterproof, so keep it dry.
Do not use it in a humid place like bathrooms. A dry environment will maintain its life to maximum.
Use the Microscope only at -5-50. 2
Sudden temperature change may form dew inside the Microscope like entering a warm room in cold winter. Put it inside a handbag or plastic bag to slow down temperature changes.
Do not point Microscope lens to the sun or strong light for a long time. Powerful light may hurt the light-sensitive electronics.
Avoid touching the lens.
The white LEDs which illuminate the Microscope target field are very bright. Do not stare directly into these LEDs as it may damage your eyes.
The clear plastic distance shell sometimes picks up dirt or toxic material from a microscopically observed surface. Be careful that this doesnt get in contact with the human skin. Always wash carefully or disinfect as needed. 3 2. Preparation Standard accessories Microscope AC adaptor QSG Stand USB cable AC adaptor Calibration Ruler Cleaning Fabric 4 Parts Names & Functions Part Meaning Off/Wifi/USB LED Dimmer and
(PC Charging Indicator USB Charge) LED Focus Wheel 1 2 3 4 5 6 Meaning
(Fixing the movement)
(for up/down) Part 7 Wheel 8 Wheel 9 Wheel 10 Wheel 11 Wheel
(fixing on the pole)
(fixing on the stage)
(fixing the microscope) 5 System Requirements 1. iOS/Android
* iOS 5.1 and later
* Android 4.3 and later 2. PC
* Windows XP / VISTA / WIN7 / WIN8
* P4 1.8 or above
* RAM: 512M
* Video Memory: 64M
* USB port: 2.0
* CD-ROM Drive Technical Specifications Image sensor Still capture resolution Video capture resolution Magnification Ratio Focus Range Video format Photo format Light source Power source iOS/Android interface 1 Mega Pixels (true resolution) 1280x720 (720P), 640x480 (VGA) 1280x720 (720P), 640x480 (VGA) 10x~200x Manual focus from 0mm to 150mm H.264 JPEG 6 LED (adjustable by control wheel) Rechargeable Li-ion battery Working time: 90mins, Charging time: 100mins Charging power: 5V DC WiFi 6 App PC interface PC Software PC Software Language Software PC Supported OS Size iOS (5.1 and later): WifiCapture Search and download from App Store Android: WifiCapture, Install from CD, or search and Download from https://play.google.com/store USB2.0 PortableCaptureHD (with measurement) English, Deutsch, Spanish, Russian, Italian, French, Portuguese, Dutch, Polish, Japanese, Korean Windows XP/Vista/Win7/ Win8 Microscope: 154mm (L) x 44mm (R) Professional Stand: 165mm(L) x118mm(W)x12mm (H) 3. Use the Wifi Microscope on iOS/Android Device 1) Download App iOS:
Search and install WifiCapture from App Store. Android:
Search WifiCapture play.google.com/store, download and install it. Or install WifiCapture from the CD that comes with the package. from 7 2) Connect the Wifi Microscope to iOS/Android device. (here we take Android Smart Phone as an example)
(1) Power on the microscope by sliding the Par1#1 to WIFI position;
(2) Turn on the Wifi of your iOS/Android Device, search the Wifi Digital Microscope from the Wifi Device list. The Wifi Microscope name is WIFICAMxxxx (xxxx stand for four-digit random number), as follows:
The password to connect the device is 123456789. 8
(3) Start the installed App, as follows:
(4) Add Camera Click Add new camera, then click Search. 9 The searched Wifi Camera will be shown on the Search result list. Click the Device name (for example, WIFICAM
(OBJ-002864-STBZD).
(5) User name is admin, default password is 123456, and then the online Wifi Camera is listed. 10 3) Preview Click the listed Wifi Camera, it starts preview as follows. The preview can be vertical or horizontal. 11 4) App Interface Icon Definition IQ Flip
(Left/Right ) Flip
(Up/Down) Brightness Contrast Back to Default Still Image Capture Video Capture Change resolution 720P/VGA/QCGA Screen Rotation
(Vertical/Horizontal) Exit 12 Main Interface Captured Still Image Captured Video Version info 5) Change Password From the camera list, click then input new password. Click Done on the right corner to confirm the setup.
, choose User, and 13 6) Setup Date/Time From the camera list, click then click use the phone time calibrate devices clock.
, choose Time, and 14 7) Delete a Wifi Camera You can delete an existing Wifi Camera. Press Edit at the right corner.
(1) For iOS, by sliding (left or right) a target Camera, then confirm to delete it.
(2) For Android, tick to select a target camera, and then choose Delete. 15 4. Install the Microscope to the Stand 1) Take the microscope out from gift box gently; put the carriage stage on a flat surface. 2) Follow the below steps:
the metal through Put pole Wheel 10!
the metal Put into the pole female part of the stage!
16 Rotate Wheel 10 to fix the pole on the stage!
the Put microscope into the ring of the stand!
17 Rotate Wheel 11 clockwise to fix the microscope on the ring.
(1) Adjust the upper part of the stand to get a proper height.
(2) Rotate Wheel 9 clockwise to fix the upper part. 18 4How to get focus Rotate Wheel 8 to get a rough focus!
Rotate Wheel 6 to get a fine focus!
Rotate Wheel 7 to lock or release the movement!
19 Install the Software on PC (Windows) 5. Insert the driver CD into CD-ROM Drive and this will automatically display the following interface:
1) Install PortableCaptureHD Click Install PortableCaptureHD and the installation wizard will guide you through the whole process. 2) Full users manual can be viewed by clicking Users Manual. 20 6. Start Microscope Connect your Microscope to your PC USB port, start the software by clicking the desktop after installation and you will see the following screen pop up. icon generated on the When the Microscope is disconnected from your PC USB port, the following message will pop up. 21 7. Software Functions Capture Photo a. Click Photo shortcut icon bar. b. Click Capture > Photo. in the main menu in the main menu Capture Video a. Click Video shortcut icon bar. b. Click Capture > Video. 22 Timer (Photo / Video) Click Timer shortcut icon in the main menu bar.
* Under Timer photo, you can set the start time, interval time and total picture number.
* Under Timer video, you can set the start time, interval time and total video number. 23 Calibration and Measurement Please make calibration before measurement. Calibration Display Crossing from Options>Crossing. Microscope default at crossing on Its used to check the dial on the calibration ruler. 24 1. Focus microscope on the attached calibration ruler and then adjust the magnification till the picture is clear. Take a picture for the selected area when the dial is parallel to the crossing as below. 2. Double-click on the picture to enter into measurement interface as below. 25 3. Click Calibration icon
, and then move mouse to the picture. Click on the beginning and ending points across a known value. Now a dialog will popup as below and you need to enter the exact value of the measurement sample into Actual dimension. Then the software will automatically calibrate the magnification rate. Click OK and the adjusted magnification rate will show in the upper right corner.
* Remark: The measured line should be paralleled. 26 4. Now you can use Any angle Line under Measurement to measure the value again. If the value icon you measure by software is nearly the same as the exact value of the dial means the calibration finish. 27 Measurement Double-click on the picture to enter into measurement
, you can interface. Under the Measurement icon choose any desired options to measure. 1. Any Angle Line Measurement Simply click from one point and drag to the next point, and then release the click. 2. Continuous Line Measurement The Continuous Line measurement allows you to measure any continuous desired length. Simply click and drag from one point to other desired points, and then release the click. 3. Radius Circle Measurement Simply click and extend out to the desired radius, the radius, circumference and area of the circle will show up accordingly. 4. Diameter Circle Measurement Simply click and extend out to the desired diameter, the diameter, circumference and area of the circle will show up accordingly. 5. Three Points Angle Measurement Simply define any three points angle and click, the angle value will then display. 28 Change Calibration If you need to change the magnification rate and adjust focus to capture picture, please calibrate the magnification rate again. 1. Double click to open the picture, Click
>
Reset magnification > Reset picture magnification as below. And then start calibration again (Calibration details please refer to page37). 29 2. Change the magnification rate and capture several pictures, click on the picture to enter into measurement
> Set magnification > Set interface. And click picture magnification, now a dialog will show up as below;
enter the magnification rate into the dialog and click OK. 30 3. If you want to use the same magnification rate to capture pictures, just click
> Set magnification
>Set capture magnification. Now all pictures will use the same magnification rate and you can start measurement directly. 31 Draw and Text You can draw or add a text on the picture and save for later analysis. 1. Click icon under the pull-down manual as below. to choose any kinds of drawing 2. Click icon popup dialogue as below. and set the font for the text in the 32 8. Software Interface Instructions Main Interface Icons Capture photo Its used to capture photo one by one. Start / Stop record video. Timer for photo / video Set the start time, interval time and total photo/video number. Full screen mode, Press ESC or double-click to exit. 33 Main Menu File Photos Directory: set the directory to store photos taken;
Videos Directory: set the directory to store video taken;
34 Options Resolution: change preview size Date/Time: set to display system date/time on preview window Language: choose different OSD language Crossing: display cross on preview window Full-screen mode: enter into full screen. Click ESC or double click to exit 35 Capture Photo: take a photo Video: record a video clip 36 Measurement Interface Instructions Save as Copy to clipboard Copy file Previous Next Undo Redo Draw Text note Measurement Calibration 37 This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. 38 Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.