Popcharger r 1 rl l matter in placed Q Q) ns Car lnstructi 1 Place the piece of iron on the back of the Wireless Charger 2.lnsert 3. Please Wireless 4. Embed a wirelessly stand in the Wireless 5.Plug wireless charging the Air Vent Mount stand int Car Charger charged Car Charger Stand slot the USB head into the Car Charger Stand mobile thecar's air vent and turn on the nthe Air Vent Mount phone with a ppsockets Max 1 OW Input:
5V/3A, 9V/2A, 12V/1.5A ductSpecifications:
Pr 1.Micro 2. Wireless Output:
Size: 68mm57mm12mm 3.Product 4.Material:
ABS+PC 5.Compatible
?.Support with all Qi-Enabled Fast Charging devices detection FOO: The product has a metal detection function, and when the metal foreign in the charging area, the product will stop Functions:
1 Foreign matter foreign object working 2. The charging product is placed 3. Popsockets not charge 4. When using a mobile Popsockets 5. The wireless Popsockets Grip. It supp charging without area indicates in Popsockets that the card slot area where the in the wireless charging area to the back of the phone or it may must be affixed affecting phone, the product the charging stand is designed can be used with function newith for ph care charger rtsmaximum distance 12mm for E RoHS Package Include:
1 x Wireless Charger 1 xAir Vent Car Mount 1 x Double sided tape 1 x Silicon Remo 3 x Cable organizer veable Sticker Pads the USB to the 3.0 power port and area behind cell phone to find the for charging, then stick the s: A coil until grip on the coil area use, please connect in the central the phone indicates 1. Before place the charger charging popsockets 2. Please do not use any irn, metal bank cards, the charger 3. Please adjust cell phone to find the charging charge slow magnetic and your devices!
the PopSockets absorbers grip, and case, credit cards, between or other metal objects to the central area behind the coil if cell phone can't charger This device may not cause harmful interference, and this devicemust accept any interference received, including interference that may cause undesired operation. Changes or FCC Statement This device complies with part 18 of the FCC Rules. Operation is Subject To the following two conditions:
(1)
(2) modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Note:
this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
(1)
(2)
(3)Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.