RS06(B75) BLUETOOTH PARING INSTRUCTION Wireless Charging Bluetooth Speaker with Alarm Clock INSTRUCTION MANUAL WHATS INCLUDED 1 X Bluetooth Speaker 1 X USB to Micro-USB Charging cable 1 X Instruction manual
(Note: The Bluetooth code is B75, pair code:0000) 1. Keep the distance between the phone and speaker within 10 meters. (for pairing only) 2. Press and hold the round power button for 2 seconds to power on, hear the prompt sound, the display turns on. 3. Turn on the Bluetooth function on the mobile device, search for Bluetooth devices, and select B75. 4. If you are prompted to enter a password to complete pairing
(Note: some mobile phone can be connected directly without entering pairing code), enter 0000. 5. The B75 will connect to your device and you will hear paired. 6. It is ready for use.
*Speaker will automatically be paired if the mobile device has been paired before. 7. Press and hold power button for 4 seconds to power off.
*Press and hold pause button for 2 seconds can disconnect the Bluetooth connection. WIRELESS CHARGING FUNCTION
-Connect to the power supply 5V/2A by micro USB cable, the red LED light in the USB port will on.
-Put your mobile phone which supports wireless charging on the top of the center charging area.
-It starts to be charged and will show battery volume on your phone during charging. SPEAKER CONTROLS PLAY/PAUSE/ANSWER/REFUSE THE CALL Press pause (MFB) button to answer the call, press it again to hang up. Press and hold pause (MFB) button to refuse the call. Double press pause (MFB) button to call back the last number. MUSIC/VOLUME During a call or when listening to music Volume + Press and hold + button Volume - Press and hold - button Go to next song Short-press + button Go to previous song Short-press - button ALARM CLOCK FUNCTION EDIT CLOCK TIME HOUR EDIT:
interface. Press + or - to Adjust hour. Double-press Clock button to enter editor MINUTE EDIT: After hour edit, short-press Clock button to switch to minute edit. Press + or - to Adjust minute. Short-press Clock button to confirm and exit edit mode. No operation for 5 seconds will automatically confirm and exit. ALARM CLOCK SETTING Alarm Clock 1: Press and hold Clock button for 2 seconds to enter alarm setting interface. After the display showed ALA1, short-press + or - to switch on/off the 1st alarm. Press the clock button then press + or - to adjust hour, short-press the clock button again to switch to minute. Press + or - to adjust minute. No operation 5 seconds will automatically confirm and exit. Alarm Clock 2: After alarm1 setting confirmed, short-press Clock button to switch to alarm 2 ALA2 setting. The operation method is the same as alarm1. ALARM CLOCK RINGS When the time runs to the alarm clock setting time, the alarm bell rings for 30 minutes. Short-press the clock button to stop the alarm;
Snooze mode: Short-press Power button, the alarm will ring again in 9 minutes later. CHARGING THE BLUETOOTH SPEAKER
(Be sure to fully charge the speaker before using for the first time.)
-Plug the standard USB charging cable into the speaker and a powered USB port.
-The LED light is red when charging. The light will turn off when the battery is fully charged. Remark:
1. The Bluetooth speaker can be used during charging. 2. The LED flash red quickly and there is prompt sound when it is a low battery. 3. Please use the offered 2.1A cable to charge the speaker. SPECIFICATIONS Speaker:40mm (120-20KHZ) Power out: 3W*2 4 SNR:905dB Built-in battery: 2000mAh Charging time: up to 4.5 hours Playing time: up to 7 hours Product net weight: 330g Charging standard: DC 5V, 1A Wireless Charging Input: DC 5V, 2A Wireless Charging Output: DC5V, 1A, 5W NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.