all | frequencies |
|
|
|
|
|
|
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
14r01-Manual | Users Manual | 183.92 KiB | August 04 2014 | |||
1 2 3 |
|
User manual | Users Manual | 2.09 MiB | October 19 2020 / October 20 2020 | |||
1 2 3 |
|
Users Manual | Users Manual | 2.56 MiB | ||||
1 2 3 |
|
08r01 Photo Interior | Internal Photos | 1019.56 KiB | August 04 2014 | |||
1 2 3 |
|
Internal photographs | Internal Photos | 536.04 KiB | October 19 2020 / October 20 2020 | |||
1 2 3 |
|
Internal photos | Internal Photos | 1021.44 KiB | ||||
1 2 3 |
|
09r01 Photo Exterior | External Photos | 776.06 KiB | August 04 2014 | |||
1 2 3 |
|
External photographs | External Photos | 395.06 KiB | October 19 2020 / October 20 2020 | |||
1 2 3 |
|
External photos | External Photos | 775.02 KiB | ||||
1 2 3 |
|
10r01 Label location | ID Label/Location Info | 368.18 KiB | August 04 2014 | |||
1 2 3 |
|
Label / label location | ID Label/Location Info | 158.07 KiB | October 19 2020 / October 20 2020 | |||
1 2 3 |
|
Label location | ID Label/Location Info | 369.79 KiB | ||||
1 2 3 | Block diagram | Block Diagram | October 19 2020 | confidential | ||||
1 2 3 |
|
Class II Permissive Change letter | Cover Letter(s) | 91.10 KiB | October 19 2020 / October 20 2020 | |||
1 2 3 |
|
Confidentiality request | Cover Letter(s) | 78.12 KiB | October 19 2020 / October 20 2020 | |||
1 2 3 | Operational description | Operational Description | October 19 2020 | confidential | ||||
1 2 3 | Parts list | Parts List/Tune Up Info | October 19 2020 | confidential | ||||
1 2 3 |
|
Professional installation attestation | Cover Letter(s) | 90.32 KiB | October 19 2020 / October 20 2020 | |||
1 2 3 | Schematic diagram 1 of 3 | Schematics | October 19 2020 | confidential | ||||
1 2 3 | Schematic diagram 2 of 3 | Schematics | October 19 2020 | confidential | ||||
1 2 3 | Schematic diagram 3 of 3 | Schematics | October 19 2020 | confidential | ||||
1 2 3 |
|
Test report | Test Report | 2.27 MiB | October 19 2020 / October 20 2020 | |||
1 2 3 |
|
Cover letter | Cover Letter(s) | 286.34 KiB | ||||
1 2 3 |
|
Cover letter C2PC | Cover Letter(s) | 100.83 KiB | ||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 |
|
01r02 Cover letter | Cover Letter(s) | 554.30 KiB | August 04 2014 | |||
1 2 3 |
|
02r02-Request of Confidentiality | Cover Letter(s) | 552.64 KiB | August 04 2014 | |||
1 2 3 | Test Report | August 04 2014 | ||||||
1 2 3 | Test Setup Photos | August 04 2014 |
1 2 3 | 14r01-Manual | Users Manual | 183.92 KiB | August 04 2014 |
Pulse Listen Deactivation EN MANUAL SMARTDEACT 07 April 2014 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness;
Its publication conveys no license under patent or other right, nor does the publisher assume Liability for any consequence of its use; specifications and availability of goods mentioned in it are Subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. N.V. Nederlandsche Apparatenfabriek Nedap info-rs@nedap.com Technical Support E-Mail Postal address Fax
+31 (0) 544-46 34 75 N.V. Nederlandsche Apparatenfabriek NEDAP, Parallelweg 2, 7141DC, Groenlo, The Netherlands Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED NEDAP SERVICE PERSONNEL. Lightning flash with an arrowhead, enclosed in a triangle, alerts you to the presence of uninsulated voltage points inside the product which could cause a serious electrical shock. An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. WARNING! To avoid the risk of fire or electrical shock, never expose these products to water or operate in a high humidity environment. This European Standard specifies a marking
of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC
(WEEE); This is in addition to the marking requirement in Article 10(3) of this Directive which requires producers to mark electrical and electronic equipment put on the market after 13 August 2005 with a crossed-out wheeled bin symbol. that applies to electrical and electronic equipment falling under Annex IA of Directive 2002/96/EC, provided the equipment concerned is not part of another type of equipment that does not fall within the scope of this Directive. Annex IB of Directive 2002/96/EC contains an indicative list of the products, which fall under the categories set out in Annex IA of this Directive;
that serves to clearly identify the producer of the equipment and that the equipment has been put on the market after 13 August 2005. EN 50419:2005 2009 N.V. Nederlandsche Apparatenfabriek NEDAP Parallelweg 2, NL-7141 DC Groenlo The software / hardware described in this book / file is furnished under a license agreement and may be used only in accordance with the terms of the agreement. Copyright Notice All Rights Reserved. Any technical documentation that is made available by N.V. Nederlandsche Apparatenfabriek NEDAP is the copyrighted work of N.V. Nederlandsche Apparatenfabriek Nedap and is owned by N.V. Nederlandsche Apparatenfabriek Nedap. 14r01-manual cgdsmartdeact.doc | Nedap Retail Support 2 No warranty The technical documentation is being delivered to you and Nedap makes no warranty as to its accuracy or use. Any use of the technical documentation or the information contained therein is at the risk of the user. Documentation may include technical or other inaccuracies or typographical errors Nedap the right to make changes without prior notice. No part of this publication may be copied without the express written permission of N.V. Nederlandsche Apparatenfabriek Nedap Parallelweg 2, NL-7141DC, Groenlo, Netherlands. Trademarks Nedap, the Nedap logo, Nedap EASi/Net and the Nedap EASi/Net are registered trademarks of Nedap N.V. Nederlandsche Apparatenfabriek Nedap Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Printed in the Netherlands Notice The documentation is based in a Part numbers and Drawing number structure. Part number can also be named as Artikel nummer or Article number Drawing numbers can also be named as: Tekening Drawing numbers are build up in a the drawing Number with a structure Txxxx-yyy-zz Txxxx-yyy is the drawing number and extension number zz means:
10 11 12 Xxxx yyy is an overview drawing of the part and can contain wiring and circuit diagrams;
is the bill of material;
is the circuit diagram of the device.
= 0000 9999
= 000-999 14r01-manual cgdsmartdeact.doc | Nedap Retail Support 3 Introduction Table of content 1. 2. 3. 4. 5. System overview FCC Declarations Wiring diagram Specifications SMARTDEACT 5 6 7 8 9 14r01-manual cgdsmartdeact.doc | Nedap Retail Support 4 Introduction 1 N.V. Nederlandsche Apparatenfabriek Nedap further on called Nedap manufactures some of the most reliable and scalable EAS Systems of the market today. With this system your able to reduce the shoplifting costs the best in combination with Nedaps tag line. The SMARTDEACT is meant for Deactivation of disposable tags according to the Pulse Listen method. It detects a tag in the field and shell try to deactivate it until it is not functioning anymore. Some of the Smart Deactivator advantages are:
1. Constant optimal deactivation distance, independent of the tag frequency between 7.8 8.5 MHz 2. Different antenna sizes and shapes 3. Deactivation behavior programmable with switches 4. Detect only Mode 5. Deactivation on input 6. Forced deactivation on input 7. Short repeating acoustical feedback for successful deactivation, continue beep when deactivation unsuccessful. 8. Prepared for connectivity in RS485 bus structure 9. Sends only a deactivation burst when a tag is detected 10. Through air synchronization with Nedap OS/T systems and other SMARTDEACT s 11. Solid state output The SMARTDEACT produces an acoustic and visual signal when it detects an operating tag and tries to deactivate it. 14r01-manual cgdsmartdeact.doc | Nedap Retail Support 5 2 System overview 1 Mains Power Adapter
-965165 9
-965160 8 SMART DEAC RS485 commu nication SMART DEACTIVATOR Input Output LED An tenna Type: SDA-265x265 4 2 3 5 6 7 8 Figure 1 Functional system overview The SMARTDEACT system consists of the following components:
1. AC/DC Power adapter Wall Mount 100 240 VAC / 12 VDC. 2. Smart Deactivator electronics 3. Antenna Cable 4. Antenna Type: SDA-265x265 5. RS485 connection to communicate with the SMARTDEACT 6. Input for to be defined functionality 7. Output to be defined functionality 8. LED for visual indication The SMARTDEACT system is ready for use. You only have to follow the next steps:
Install the Smart Deactivator system according the: Prospect SMARTDEACT;
Power up the Smart Deactivator system;
Check the functionality; by deactivating a Tag above the antenna and check the sound. Call Nedap Customer Support for quick hands-on problem solution in case of unforeseen trouble (see Technical Support);
14r01-manual cgdsmartdeact.doc | Nedap Retail Support 6 3 Wiring Diagram Schematically diagrams below shows an example of the connections between used modules. The picture shows the full configuration that can be built up. Power adapter Deactivator Antenna Mains Power Adapter RS485 commu nication Input Output LED 1 3 2 SMART DEACTIVATOR SMART DEAC 4 An tenna SDA-265x265 The connections for a full configuration are:
1 DC power line Connects 12VDC from the Power Adapter to the Electronics Unit LED cable Connects the SMARTDEACT to the LED unit RS485 communication cable Connects the SMARTDEACT to a RS485 host device for example a personal computer Antenna cable Connects the SMARTDEACT to the SDA-265x265 antenna 2 3 4 14r01-manual cgdsmartdeact.doc | Nedap Retail Support 7 FCC Declarations 4 Compliance statements (part15.19) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operating is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil se conforme aux normes RSS210 exempts de license du Industry Canada. L'opration est soumis aux deux conditions suivantes:
(1) cet appareil ne doit causer aucune interfrence, et
(2) cet appareil doit accepter n'importe quelle interfrence, y inclus interfrence qui peut causer une opration non pas voulu de cet appareil. Warning (part15.21) Changes or modifications not expressly approved by party responsible for compliance could void the users authority to operate the equipment. This in particular is applicable for the antenna which can be delivered with the SMARTDEACT System. RF Exposure (OET Bulletin 65) To comply with FCC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or installed at locations where there is at least 20 cm separation distance between the antenna and all persons. Information to the User (Part 15.106(b)) Note: This equipment has been tested and found to comply with the limits for a class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequent energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determine by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver 14r01-manual cgdsmartdeact.doc | Nedap Retail Support 8 5 Specifications SMARTDEACT Enviromental Description Material Construction Protection Class Aluminium IP20 Min. Typical Max. Condition 8.2 7.8 MHz Operating frequency Operational temperature Storage temperature Relative Humidity Operating Distance Input Requirements and electrical specifications 0C
-10C 20%
0.3m Min. 90VAC 0.35A 47 Hz Description Input Voltage Input Current Line Frequency Inrush Current @25C Operation Voltage Power Regulations Safety approvals of the Power Adapter:
11.64VDC Typical 100-240
-
50-60Hz 12VDC 6W 8.5 MHz 40 C
+70C 90%
Max. 264VAC 0.7A 63Hz 12.6VDC non-condensing Antenna type dependant, Tag dependant Condition Full Range; 50/60Hz 264VAC - 90VAC
-
230VAC Cold Start 230VAC 50Hz cULus according to UL/CSA 60950-1 CB according to IEC60950-1 TUV EN60950-1 (2006) NEC Class 2 according to UL1310 CE Europe according to EN60950-1 Japan PSE Telecom system approval Cannada IC ID according to RSS210 IC ID:1444A-SMARTDEACT US according to FCC Part 15 FCC ID:CGDSMARTDEACT CE according to EN300330 Japan pending In compliance with Human exposure assessment according to:
EN62369-1 and EN50364 ICNIRP Guidelines IEEE C95.1 RSS102 ARIB STD-38 IEC62369-1 Electromagnetic compatibility EN 301 489 (Emission according to EN55022) IEC 61000-6-2 IEC 61000-6-3 CISPR 22 14r01-manual cgdsmartdeact.doc | Nedap Retail Support 9
1 2 3 | User manual | Users Manual | 2.09 MiB | October 19 2020 / October 20 2020 |
UNIT SD02 RF 1x | smart deactivator 1x | 4-pole antenna connector 1x | connector housing 1x | power supply 1x | cover
(incl. adapters EU, UK, CN, US) The Smart Deactivator model: SMART DEACT is an Electronic Article Surveillance (EAS) system intended to be used in stores at check-out counters This equipment should be installed, operated, serviced, and repaired by skilled personnel only. The installation and interconnection of this equipment to facility wiring and other equipment must be done by a competent, skilled craftsperson who is familiar with applicable standards and codes governing the installation. Installation methods, practices or procedures that are unauthorized or done improperly are dangerous and could result in serious personal injury or damage to property and equipment. Intended use for deactivating 8.2MHz anti-theft alarm tags. Warning dimensions 185 131,6
, 5 4 1 6 0 1
, 6 6 8 6 5 6 5 0 8 4,5 110 50 Quick ref. : UNIT SD02 RF Mail: support-retail@nedap.com Nedap N.V. Parallelweg 2, NL-7141 DC Groenlo (The Netherlands)
: 17 March 2020 9:06 am dsgn date item
: CvdB
: 9200002 Copyright Nedap N.V. No part of this document may be reproduced, copied or distributed in any form or by any means, document
: T9200002-45.01 or stored in a database or retrieval system, without the prior written permission of Nedap N.V. revision
: B.08 5 5 3 4 4 connect deactivator antenna cable to antenna connector 1 2 3 4 5 Antenna wire red Antenna wire black To deactivator antenna Fix cable with tie-wrap Screw (2x) connect to power 100-240V 3 1 2 3 4 Power supply Lamp green on Volume button 2-pole Connector from power supply beeper sound (standard sound) 1 2 2 1 deactivation detection connector explanation GND
+12V LED +
LED -
Power connector Ground Voltage ripple <125mV Power connector +12VDC Led output connector + The led will flash 3x at deactivation Led output connector -
and once on detection. Out C Output Common Solid state output (max 120mA) Out NO Normal open Inp A Inp K Input anode Input Kathode 0 - 12V High signal, input >2V
+12V
It is possible, by using a special RS485 A RS485 connector A RS485 converter and software, to RS485 B RS485 connector B adjust some settings. GND
solid state output G3VM-351A OC1 Input kathode (-) anode (+) c no GND Led Yellow Led Orange Low after deactivation High at input signal Led yellow Led orange Led yellow Led orange Led yellow Led orange Led yellow Led orange Led yellow Led orange Led yellow Led orange Led yellow Led orange Low after detection Flash High after 10 seconds detection Not used High after 10 seconds detection High during deactivation Low after deactivation High at input signal High pulse after deactivation Not used High pulse after detection Flash High pulse after detection High during deactivation program switch settings 1 2 3 4 5 6 7 8 Standard mode 1 2 3 4 5 6 7 8 Line Termination RS485 1 2 3 4 5 6 7 8 Detect only mode 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Output after 10 seconds of detection Forced deactivation, for 90 seconds after input signal 90 seconds Input used as switch for buzzer volume Counting output inverted - Standard mode Detect only - Output inverted Deactivation only if input is high High Low
Low sensitivity Standard sensitivity Remote operation address 1 Remote operation address 2 Version: > V7.5 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15
Forced deactivation, for 90 seconds after input signal Output after 1 deactivation burst and still detection. Led yellow Led orange High after detection High during deactivation Forced deactivation, for 90 seconds after input signal Output after 2 deactivation bursts and still detection. Led yellow Led orange High after detection High during deactivation Forced deactivation, for 90 seconds after input signal Output after 3 deactivation bursts and still detection. Led yellow Led orange High after detection High during deactivation 1 2 3 4 5 6 7 8 Input Deactivation 90 seconds 1 2 3 4 5 6 7 8 Input Deactivation 90 seconds 1 2 3 4 5 6 7 8 Input Deactivation 90 seconds DLL mode - Transaction Controlling 4 = high address 2 4 = low address 1 (standard) Beeper default off. Beeper default off. Beeper default off. In detect only mode, due to the RF detection field, we cannot guarantee labels will never deactivate. connectors from smart deactivator Antenna connector side Connector side 1 2 3 4 5 6 7 8 Status LEDs Status LEDs Green Red
= Power
= Label detected 1 ash (Standard mode) Label deactivated 3 ashes (Standard mode)
= Output LED
= Status LED Yellow Orange Depending on dipswitch settings, LED behaviour can be different. (See settings below) settings only for use with iSense (Version: > V7.6) 16 Renos electronics Smart-
Deactivator 1 2 3 4 5 6 7 8 1 = Line Termination RS485 4 = Low Address 1 Shielding Shielding Renos electronics 1 2 3 4 5 6 7 8 1 = No Line Termination 4 = Low Address 1 Renos electronics Smart-
Deactivator 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 = Line Termination RS485 4 = High Address 2 1 = Line Termination RS485 1 2 3 4 5 6 7 8 4 = Low Address 1 Renos electronics Smart-
Deactivator 1 = Line Termination RS485 4 = Low Address 1 Smart-
Deactivator 1 Smart-
Deactivator 2 17 1 2 3 4 5 6 7 8 1 = No Line Termination 4 = Low Address 1 1 2 3 4 5 6 7 8 1 = No Line Termination 4 = Low Address 1 Renos electronics Renos electronics 1 2 3 4 5 6 7 8 1 = Line Termination RS485 4 = High Address 2 1 2 3 4 5 6 7 8 1 = Line Termination RS485 4 = High Address 2 Smart-
Deactivator 1 Smart-
Deactivator 2 Shielding Smart-
Deactivator 1 Smart-
Deactivator 2 Smart deactivator RS485 Renos RS485
+12V A B GND Renos electronics
B A
B A
Smart deactivator RS485 Smart deactivator RS485
B A
Renos RS485
+12V A B GND Renos RS485
+12V A B GND Shielding Shielding Shielding Renos electronics Use shielded four-wire cable (e.g. Unitronic LiYCY 4x0,25 for a maximum length of 25m, or LiYCY 4x0,50 for maximum length of 50m) Disclaimer Nedap intends to make this manual accurate and complete. However, Nedap does not warrant that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. Nedap disclaims any liability for damage to property or personal injury resulting, in whole or in part, from improper installation, modification, use or misuse of its products. The information contained in this document is subject to change without notice. FCC and ISED Compliance statement This device complies with part 15 of the FCC Rules and this device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet appareil contient des metteurs / rcepteurs exempt (s) de licence qui sont conformes aux RSS(s) exemptes de licence d'Innovation, Sciences et Dveloppement conomique Canada. Lopration est soumis aux deux conditions suivantes:
(1) cet appareil ne doit causer aucune interfrence, et
(2) cet appareil doit accepter nimporte quelle interfrence, y inclus interfrence qui peut causer une opration non pas voulu de cet appareil. Les changements ou modifications nayant pas t expressment approuvs par la partie responsable de la conformit peuvent faire perdre lutilisateur lautorisation de faire fonctionner le matriel. FCC and IC Radiation Exposure Statement with any other antenna or transmitter. Cet quipement est conforme a CNR-102 limites nonces pour un environne- ment non contrl. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de Classe B est conforme la norme Canadienne ICES-003. FCC Information to the user This equipment complies with FCC and Canadian radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction Note: This equipment has been tested and found to comply with the limits for a class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequent energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determine by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit NOTE: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. To ensure compliance with FCC regulations, use only the shielded interface cables provided with the product, or additional specified components or accessories that can be used with the installation of the product. Hereby, Nedap N.V. declares that the radio equipment model SMART DEACT is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the Este producto tiene certificado de homologacin IFT nmero: RCPNESM19-0026 different from that to which the receiver. FCC ID: CGDSMART DEACT IC:1444A-SMARTDEACT CE Declaration of Conformity following internet address: https://portal.nedapretail.com/
Singapore Compliance Complies with IMDA Standards DA105282 Disposal of this product local rules and regulations. User manual The owner or last user of this product is responsible for proper disposal of (parts of) the product as required by The complete instruction manual can be found at https://portal.nedapretail.com/
ISED Information to the user This radio transmitter [1444A-SMARTDEACT] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Cet metteur radio [1444A-SMARTDEACT] a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci-dessous, avec le gain maximal autoris indiqu. Les types d'antenne non inclus dans cette liste qui ont un gain suprieur au gain maximum indiqu pour tout type rpertori sont strictement interdits pour l'utilisation avec cet appareil. The following antenna models can be installed/connected to the Smart Deactivator. 1. 2. 3. 4. 5. SDA-265x265 DAPL 275x275 MG9800I NCR7878-5000 HN24-000002 Specifications Power Supply Dimensions Weight Frequency Band (8.2MHz) Modulation Antenna type 100-240Vac Power adapter, 0.6-0.3A, 50-60Hz 12Vdc, 2A, 24W max. 185mm x 106mm x 37mm 800gr 7.4 8.8MHz Frequency Sweep Inductive loop Output Power (8.2MHz) Max 9 dBA/m @ 10m
1 2 3 | Users Manual | Users Manual | 2.56 MiB |
Smart Deactivator Manual UL manual smart deactivator according to ul regulations SMART DEAC Mounting SMART DEAC Wiring Appendix 1 : Quick Reference Technical Support Email:
support-eas@nedap.com Postal address:
N.V. Nederlandsche Apparatenfabriek NEDAP, Parallelweg 2, 7141DC, Groenlo, The Netherlands Safety precautions:
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED NEDAP SERVICE PERSONNEL. EN 50419:2005 This European Standard specifies a marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/
EC (WEEE); This is in addition to the marking requirement in Article 10(3) of this Directive which requires producers to mark electrical and electronic equipment put on the market after 13 August 2005 with a crossed-out wheeled bin symbol. that applies to electrical and electronic equipment falling under Annex IA of Directive 2002/96/EC, provided the equipment concerned is not part of another type of equipment that does not fall within the scope of this Directive. Annex IB of Directive 2002/96/EC contains an indicative list of the products, which fall under the categories set out in Annex IA of this Directive;
that serves to clearly identify the producer of the equipment and that the equipment has been put on the market after 13 August 2005. 2013 N.V. Nederlandsche Apparatenfabriek NEDAP:
The software / hardware described in this book / file is furnished under a license agreement and may be used only in accordance with the terms of the agreement. Copyright Notice:
All Rights Reserved. Any technical documentation that is made available by N.V. Nederlandsche Apparatenfabriek NEDAP is the copyrighted work of N.V. Nederlandsche Apparatenfabriek Nedap and is owned by N.V. Nederlandsche Apparatenfabriek Nedap. 2 Table of content 1 2 3 4 5 6 Introduction System overview Installation instructions Regulatory declaration Specifications SMART DEAC Appendix 1 4 5 6 7 8 9 3 1 Introduction N.V. Nederlandsche Apparatenfabriek Nedap, hereafter called Nedap, is manufacturer of one of the most reliable and scalable EAS Systems in the market today. With a Nedap EAS system you are able to reduce shoplifting costs to a minimum in combination with Nedaps tagging solutions. The Nedap Smart Deactivator, also called SMART DEAC, is meant for deactivation of disposable 8.2MHz RF labels. It detects RF labels and hard tags in range of the deactivator antenna and tries to deactivate the rf labels until they are deactivated. Some of the Smart Deactivator advantages are:
1. Constant optimal deactivation distance, independent of the tag frequency between 7.2 8.8 MHz 2. Deactivation behavior programmable with switches 3. Detect only Mode 4. Deactivation on input 5. Forced deactivation on input 6. Short repeating acoustical feedback for successful deactivation, continuous beep when deactivation is unsuccessful or when a hard tag is detected. 7. Prepared for connectivity in RS485 bus structure 8. Sends only a deactivation burst when a tag is detected; Low energy consumption 9. Through air synchronization with Nedap OS/T systems and other SMARTDEAC s The SMART DEAC produces an acoustic and visual signal when it detects and / or deactivates an operating RF label or hard tag. SMART DEAC ANTENNA 265x265 ANTENNA 275x275 4 2 System overview 1 4 7 Power Adapter Nedap Part.no.: 9651802 RS485 communication 5 6 Input Output LED Nedap Part.no.: 9563652 SMART DEAC Nedap Part.no. 9937676 2 Antenna Model: SDA-265x265 Nedap Part.no.: 9564101 or Model: DAPL-275x275 Nedap Part.no.: 9911537 3 Figure 1 Functional system overview The SMART DEAC system (Figure 1) consists of the following components:
1. AC/DC Power adapter Wall Mount 100 240 VAC / 12 VDC Nedap Part.no.: (9551802) 2. Smart Deactivator electronics (9937676) 3. Antenna including cable - Model: SDA-265x265 (9564101) or Model: DAPL-275x275 (9911537) 4. RS485 connection to communicate with the SMART DEAC 5. Input for functionality to be defined 6. Output for functionality to be defined 7. LED for visual indication (9563652) The SMART DEAC system is plug & play. You only have to follow the next steps:
Install the Smart Deactivator system according the instructions;
Power up the Smart Deactivator system;
Check the functionality; by deactivating a RF label above the antenna and check it for a audio signal. Call Nedap EAS Support for quick hands-on problem solution in case of unforeseen trouble
(see Technical Support on page 2) 5 3 Installation instructions The SMART DEAC electronics unit must be powered with a NEC class2 type power source like the NEDAP AC/DC power adapter 100~240Vac/12V dc NEDAP part number 9651802. Always place the unit near a power outlet (less than 1 meter / 3.3 feet ), the power outlet should be easily accessible, also after installation. All the outputs from the SMART DEAC are NEC class2 outputs, output voltages will be 12Vdc or less. The inputs may only be connected to class2 powered system. The SMARTDEAC must be mounted on a solid, nonflammable surface, using all mounting holes and proper mounting material, according to local regulations. All wiring should be done according to local regulations. External LED An external LED can be connected to the connector pins marked LED + and -. We recommend the use of an UL recognized LED like the APEM red panel mount indicator led type Q14F1CXXR02.
(V_forward 1,6v +/-10% and I_forward max. 20mA) The LED output is current limited and short-circuit protected. 6 4 Regulatory declaration Compliance statements (part15.19) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Warning (part15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This in particular is applicable for the antenna which can be delivered with the SMART DEAC System. RF Exposure (OET Bulletin 65) To comply with FCC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or installed at locations where there is at least 20cm / 8 separation distance between the antenna and all persons. Information to the User (Part 15.106(b)) Note: This equipment has been tested and found to comply with the limits for a class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequent energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult your local Nedap Business Partner or
- Consult the dealer of the radio communication device(s) or an experienced radio/TV technician for help. 7 5 Specifications SMART DEAC Enviromental Description Material Construction Protection Class Operating frequency Operational temperature Storage temperature Relative Humidity Operating Distance Aluminium IP20 Min. 7.5 MHz 0 C / 32 F
-10 C / 14 F 20 %
Input Requirements and electrical specifications Description Min. 90 VAC 0.35 A 47 Hz Input Voltage Input Current Line Frequency Operation Voltage Power Regulations Safety approvals of the Power Adapter cULus according to UL/CSA 60950-1 CB according to IEC60950-1 TUV EN60950-1 (2006) NEC Class 2 CE Europe according to EN300330 Japan PSE Typical 8.2 MHz 0.3 m / 12 Typical 100-240
-
50-60 Hz 3 W Max. 8.8 MHz 40 C / 104 F
+70 C / 158 F 90 %
Condition non-condensing Tag-dependant Max. 264 VAC 0.7 A 63 Hz Condition Full Range; 50/60Hz 264 VAC - 90 VAC
-
230 VAC 50Hz Telecom system approval Canada IC according to RSS210 IC ID:1444A-SMARTDEAC US according to FCC Part 15 FCC ID:CGDSMARTDEAC CE according to EN300330 Japan pending In compliance with Human exposure assessment according to:
ICNIRP Guidelines IEEE C95.1 EN62369-1 and EN50364 RSS102 ARIB STD-38 IEC62369-1 Electromagnetic compatibility EN 301 489 (Emission according to EN55022) CISPR 22 IEC 61000-6-2 IEC 61000-6-3 8 6 Appendix 1 Deactivator Antenna 265x265 Deactivator Antenna 265 x 265 (cable length 1600 mm) 02 Bottom mount 01 Table 4x , not included 4,5 (4x) 0 5 1 5 6 2 4,5 (4x) 0 5 1 5 6 2 150 265 150 265 GROENLO THE NETHERLANDS dsgn
: CB date
: 27 February 2014 12:08 PM quick reference : antenna 265x265 Copyright by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. rev
: A article no
: 9741704 page
: 1 of 1 drawing
: T9741704-45.01 9 Smart Deactivator 1x Smart Deactivator including power supply 1x Antenna connector set 1x Power Supply 1x Connector cover 02 Connect deactivator antenna to antenna connector to deactivator antenna ANT1 ANT2 Tie Wrap 6
. 1 3 1 ANT Antenna wire 1 Antenna wire 2 ANT GND Ground GND Ground 03 Connect deactivator antenna to Smart Deactivator 01 Mount housing to solid surface 0 1 5 2
. 8 9 0 1 3
. 5 7 1 5
. 0 4 5
. 4 106 14.5 56 86.6 04 Connect to power 100-240V 05 Beeper sound volume 06 Beeper sound (Standard mode) deactivation detection GROENLO - HOLLAND description:
quick ref. Smart Deactivator | art. no. 9200002 Copyright by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. drw: CB 2013/05/29 chk:
doc. article no: 5276802 Rev. : B.03 sheet: 45.01 of 1 drawing: T9937-676 10
) s g n i t t e s h c t i w s m a r g o r P e e S
(
. t n e r e f f i d e b n a c r u o i v a h e b D E L
, s g n i t t e s h c t i i w s p d n o g n d n e p e D i
) e d o m d r a d n a t S
(
s e h s a 3 d e t a v i t c a e d l e b a L
) e d o m d r a d n a t S
(
h s a 1 d e t c e t e d l e b a L
=
r e w o P
=
D E L t u p t u O
=
D E L s u t a t S
=
s D E L s u t a t S n e e r G d e R e g n a r O w o l l e Y s D E L s u t a t S 8 7 6 5 4 3 2 1 e d i s r o t c e n n o C d e s u t o n n o i t a v i t c a e d r e t f a e s l u p h g H i n o i t a v i t c a e d r e t f a w o l l a n g i s t u p n i t a h g H i n o i t c e t e d r e t f a e s l u p h g H i h s a l F n o i t c e t e d r e t f a e s l u p h g H i n o i t a v i t c a e d g n i r u d h g H i 5 8 4 S R n o i t a n m r e T e n L
=
i i 1 1 s s e r d d A w o L
=
4 8 7 6 5 4 3 2 1 r o t a v i t c a e D
-
t r a m S e s n e S
!
h t i 7 3 i 2 r o t a v i t c a e D
-
t r a m S 1 r o t a v i t c a e D
-
t r a m S 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 5 8 4 S R n o i t a n m r e T e n L
=
i i 1 i n o i t a n m r e T e n L o N
=
i 1 2 s s e r d d A h g H
=
i 4 1 s s e r d d A w o L
=
4 2 r o t a v i t c a e D 1 r o t a v i t c a e D
-
t r a m S
-
t r a m S 7 3 i e d i s r o t c e n n o c a n n e t n A 3 1 4 1 S S
+
D N G r o t a v i t c a e d t r a m S 5 8 4 S R
+
B A
-
s o n e R 5 8 4 S R V 2 1
+
A B D N G w e s u r o f y l n o s g n i t t e S 6
. 7 V
>
:
n o i s r e V A 1 5 3
-
M V 3 G 1 C O t u p t u O e t a t S d i l o S C D V 2 1
+
r o t c e n n o C r e w o P d n u o r G r o t c e n n o c r e w o P n o i t a v i t c a e d t a x 3 h s a l l i w D E L e h T
. n o i t c e t e d n o e c n o d n a o t
, e r a w t f o s d n a r e t r e v n o c 5 8 4 S R l a i c e p s a g n i s u y b
, e l b i s s o p s i t I
. s g n i t t e s e m o s t s u d a j t u p t u O e t a t S d i l o S V 2 1
-
5
+
r o t c e n n o C t u p t u O D E L
-
r o t c e n n o C t u p t u O D E L n o m m o C t u p t u O n e p O l a m r o N e d o h t a K t u p n I e d o n A t u p n I
+
A r o t c e n n o C 5 8 4 S R B r o t c e n n o C 5 8 4 S R
-
D N G V 2 1
+
+
D E L
-
D E L C t u O O N t u O A p n I K p n I V 2 1
+
A 5 8 4 S R B 5 8 4 S R D N G
)
-
(
e d o h t a K t u p n I
)
+
(
e d o n A n o i t c e t e d s d n o c e s 0 1 r e t f a h g H i d e s u t o n n o i t c e t e d s d n o c e s 0 1 r e t f a h g H i n o i t c e t e d r e t f a w o L h s a l F n o i t a v i t c a e d r e t f a w o L l a n g i s t u p n i t a h g H i n o i t a v i t c a e d g n i r u d h g H i w o l l e Y D E L e g n a r O D E L e g n a r O D E L w o l l e Y D E L w o l l e Y D E L e g n a r O D E L w o l l e Y D E L n o i t c e t e d f o s d n o c e s 0 1 r e t f a t u p t u O e d o m y l n o t c e t e D 5 8 4 S R n o i t a n m r e T e n L i i
) t i n u f o m o t t o b n o l e b a l e d o m d r a d n a t S n o i s r e v
,
. 8 6 v n o i s r e v t s n g e r n r u i t c t
(
e s g s n h i t t c e t s i w h c S t i w m S a m r a g r g o o r r P P 8 7 6 5 4 3 2 1 e g n a r O D E L l a n g i s t u p n s d n o c e s 0 9 i r e t f a s d n o c e s 0 9 r o f
, n o i t a v i t c a e d d e c r o F w o l l e Y D E L e g n a r O D E L w o l l e Y D E L e g n a r O D E L e g n a r O D E L w o l l e Y D E L w o l l e Y D E L e g n a r O D E L g n i l l
) 3
. 6
>
e r a w t f o s
(
i h g h s i t u p n i f i y l n o n o i t a v i t c a e D
) 4 6
.
>
e r a w t f o S
(
y t i v i t i s n e s d r a d n a t S
=
y t i v i t i s n e s w o L
=
w o L h g H i e d o m d r a d n a t S
-
d e t r e v n i t u p t u o g n i t n u o C d e t r e v n i t u p t u O
-
y l n o t c e t e D l e m u o v r e z z u b r o f h c t i w s s a d e s u t u p n I o r t n o C n o i t c a s n a r T
-
e d o m L L D
) 0
. 7 V e r a w t f o s
(
8 7 6 5 4 3 2 1
) d r a d n a t s
(
1 s s e r d d A w o l
=
4 2 s s e r d d A h g h
=
i 4
) 0
. 7 V e r a w t f o s
(
5
. 7 V
>
:
n o i s r e V 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 2 3 4 5 6 7 8 9 0 1 1 1 2 1 11 1 v
-
4 1 0 2 parallelweg 2d nl-7141 dc groenlo the netherlands t f e i
+31 (0) 544 471555
+31 (0) 544 465814 info-rs@nedap.com www.nedap-retail.com
1 2 3 | 10r01 Label location | ID Label/Location Info | 368.18 KiB | August 04 2014 |
Anti pilferage System Deactivator for disposable tags Brand NEDAP Model: SMARTDEACT Label and label location Page 1 of 5 Description of EUT:
Manufacturer:
Brand mark:
Model:
FCC ID:
IC:
Type of Service:
Anti pilferage System Deactivator for disposable tags Gigatek Inc Taiwan Nedap SMARTDEACT CGDSMARTDEACT 1444A-SMARTDEACT New Application
: Anti pilferage System Deactivator for disposable tags
: Gigatek Inc Taiwan
: Nedap
: SMARTDEACT CGDSMARTDEACT 1444A-SMARTDEACT New Application
: Mr. Jacques Hulshof
: N.V. Nederlandsche Apparatenfabriek Nedap
: Parallelweg 2
: 7141 DC
: Groenlo
: 6
: 7140 AA
: Groenlo
: The Netherlands
: +31 (0) 544 471111
: +31 (0) 544 463475 Description of item Description of EUT Manufacturer Brand Model FCC ID IC Type of Service Applicant information Applicant's representative Company Address Postal code City PO-box Postal code City Country Telephone number Telefax number 07 April 2014 Page 2 of 5 Description of EUT:
Manufacturer:
Brand mark:
Model:
FCC ID:
IC:
Type of Service:
Anti pilferage System Deactivator for disposable tags Gigatek Inc Taiwan Nedap SMARTDEACT CGDSMARTDEACT 1444A-SMARTDEACT New Application Table of contents 1 LABEL LOCATION ................................................................................................................................................................. 4 ID LABEL .............................................................................................................................................................................. 4 COMPLIANCE STATEMENT .................................................................................................................................................... 4 1.1 1.2 2 LABEL INFORMATION ......................................................................................................................................................... 5 ID LABEL .............................................................................................................................................................................. 5 COMPLIANCE LABEL ............................................................................................................................................................. 5 2.1 2.2 Page 3 of 5 1 Label location 1.1 Id Label 1.2 Compliance statement Description of EUT:
Manufacturer:
Brand mark:
Model:
FCC ID:
IC:
Type of Service:
Anti pilferage System Deactivator for disposable tags Gigatek Inc Taiwan Nedap SMARTDEACT CGDSMARTDEACT 1444A-SMARTDEACT New Application Page 4 of 5 Description of EUT:
Manufacturer:
Brand mark:
Model:
FCC ID:
IC:
Type of Service:
Anti pilferage System Deactivator for disposable tags Gigatek Inc Taiwan Nedap SMARTDEACT CGDSMARTDEACT 1444A-SMARTDEACT New Application 2 Label information 2.1 ID label 2.2 Compliance label Page 5 of 5
1 2 3 | Label / label location | ID Label/Location Info | 158.07 KiB | October 19 2020 / October 20 2020 |
Label location and artwork Label location and artwork Anti-Pilferage System for deactivation of disposable tags Brand: Nedap Model: SMART DEACT RH 14 October 2020 V2.0 Author Date Status Nedap N.V. Parallelweg 2 7141 DC Groenlo The Netherlands page 1 of 5 Label location and artwork Anti-Pilferage System for deactivation of disposable tags Nedap N.V. Nedap SMART DEACT Description of EUT Description of EUT Manufacturer Brand Model Applicant Information Company Address Postal code City PO Box Postal code City Country Telephone number Telefax number Nedap N.V. Parallelweg 2 7141 DC Groenlo 6 7140 AA Groenlo The Netherlands
+31 (0) 544 471111
+31 (0) 544 463475 page 2 of 5 Label location and artwork 0. CONTENTS 1. Location of product label _____________________________________________________________ 4 1.1. ID Label and compliance label ____________________________________________________ 4 2. Product labels ______________________________________________________________________ 5 2.1. ID Labels ______________________________________________________________________ 5 2.2. Compliance Label _______________________________________________________________ 5 page 3 of 5 Label location and artwork 1. 1.1. Location of product label ID Label and compliance label Compliance label
(Information to the user) ID label and markings page 4 of 5 Label location and artwork 2. Product labels 2.1. ID Labels MODEL: SMARTDEACT HVIN: SMARTDEACT2 PART No: 9937676 SERIAL No: xxxx X xxxx 2.2. Compliance Label V7.6 Nedap N.V. Parallelweg 2, 7141DC, Groenlo, Netherlands FCC ID: CGDSMARTDEACT IC: 1444A-SMARTDEACT CAN ICES-3(B)NMB-3(B) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifcations not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet appareil se conforme aux normes CNR 210 exempts de license du Industry Canada. Lopration est soumis aux deux conditions suivantes:
(1) cet appareil ne doit causer aucune interfrence, et
(2) cet appareil doit accepter nimporte quelle interfrence, y inclus interfrence qui peut causer une opration non pas voulu de cet appareil. Les changements ou modifcations nayant pas t expressment approuvs par la partie responsable de la conformit peuvent faire perdre lutilisateur lautorisation de faire fonctionner le matriel. page 5 of 5
1 2 3 | Label location | ID Label/Location Info | 369.79 KiB |
Anti pilferage System Deactivator for disposable tags Brand NEDAP Model: SMARTDEACT Label and label location Page 1 of 5 Description of EUT:
Manufacturer:
Brand mark:
Model:
FCC ID:
IC:
Type of Service:
Anti pilferage System Deactivator for disposable tags Gigatek Inc Taiwan Nedap SMARTDEACT CGDSMARTDEACT 1444A- SMARTDEACT New Application
: Anti pilferage System Deactivator for disposable tags
: Gigatek Inc Taiwan
: Nedap
: SMART DEACT CGDSMARTDEACT 1444A-SMARTDEACT New Application
: Mr. Jacques Hulshof
: N.V. Nederlandsche Apparatenfabriek Nedap
: Parallelweg 2
: 7141 DC
: Groenlo
: 6
: 7140 AA
: Groenlo
: The Netherlands
: +31 (0) 544 471111
: +31 (0) 544 463475 Description of item Description of EUT Manufacturer Brand Model FCC ID IC Type of Service Applicant information Applicant's representative Company Address Postal code City PO-box Postal code City Country Telephone number Telefax number 31 March 2014 Page 2 of 5 Description of EUT:
Manufacturer:
Brand mark:
Model:
FCC ID:
IC:
Type of Service:
Anti pilferage System Deactivator for disposable tags Gigatek Inc Taiwan Nedap SMARTDEACT CGDSMARTDEACT 1444A- SMARTDEACT New Application Table of contents 1 LABEL LOCATION ................................................................................................................................................................. 4 2 LABEL ....................................................................................................................................................................................... 5 OVERVIEW ................................................................................................................... ERROR! BOOKMARK NOT DEFINED. BOTTOM VIEW ...................................................................................................................................................................... 5 COMPLIANCE LABEL ENGLISH ...................................................................................... ERROR! BOOKMARK NOT DEFINED. COMPLIANCE LABEL FRENCH ....................................................................................... ERROR! BOOKMARK NOT DEFINED. 2.1 2.2 2.3 2.4 Page 3 of 5 1 Label location 1.1 Id Label 1.2 Compliance statement Description of EUT:
Manufacturer:
Brand mark:
Model:
FCC ID:
IC:
Type of Service:
Anti pilferage System Deactivator for disposable tags Gigatek Inc Taiwan Nedap SMARTDEACT CGDSMARTDEACT 1444A- SMARTDEACT New Application Page 4 of 5 Description of EUT:
Manufacturer:
Brand mark:
Model:
FCC ID:
IC:
Type of Service:
Anti pilferage System Deactivator for disposable tags Gigatek Inc Taiwan Nedap SMARTDEACT CGDSMARTDEACT 1444A- SMARTDEACT New Application 2 Label information 2.1 ID label 2.2 Compliance label Page 5 of 5
1 2 3 | Class II Permissive Change letter | Cover Letter(s) | 91.10 KiB | October 19 2020 / October 20 2020 |
Nedap N.V. Parallelweg 2 7141 DC Groenlo The Netherlands T: +31 (0)544 471 555 info-rs@nedap.com www.nedap-retail.com Groenlo, 22 September 2020 American Certification Body Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Subject: Cover letter FCC filing CGDSMARTDEACT Permissive Class II change concerning transmitter output filter. To Whom it may concern, We, Nedap N.V., hereby would like to apply for FCC certification of the following device:
FCC ID FRN Brand Model Type of Service Description This Permissive class II change concerns the updating of obsolete passive components and the addition of a common-
mode filter at the transmitter output. Manufacturer:
Company Point of Contact /Position Address/City Country Phone number/Fax number Email address Web site The following PDF files (exhibits) are electronically submitted:
: CGDSMARTDEACT
: 0007696149
: Nedap
: SMARTDEACT
: Permissive Class II change
: An Anti Pilferage System (FAP) operating in the band 7.800 8.500 MHz
: Gigatek Inc
: (Mr.) Moses Huang/Vice President
: No. 47, Hsiang Ho Road/Tan-Tzu Hsiang, Taicheng Hsien,
: Taiwan R.O.C.
: + 886 4 25375672/+ 886 4 25388836
: moses@mail.gigatek.com.tw
: www.gigatek.com.tw 1. Cover letter (this document) 2. Request for confidentiality 3. Application form 4. Antenna information (3 provided 4, 4a and 4b) 5. Bill of material 6. Circuit diagram 7. Block diagram 8. Interior photograph report 9. Exterior photograph report 10. Label location incl. label 11. Theory of Operation 12. Test report in conformity (3 provided 12 and 12a and 12b) 13. Test setup photographs (2 provided 13 and 13a) 14. Install Manual 15. Brochure Trade register: 08013836 | IBAN: NL08 ABNA 0453299555 | BIC: ANBNANL2A | VAT: NL001675801B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request. 16. Antenna NCR7878-5000 drawing 17. Antenna SDA-265x265 attestation 18. Response To inquiry to FCC 19. Attestation letter Professional Installation Best regards, Nedap N.V. Reinold Hubers Compliance Manager Trade register: 08013836 | IBAN: NL08 ABNA 0453299555 | BIC: ANBNANL2A | VAT: NL001675801B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request.
1 2 3 | Confidentiality request | Cover Letter(s) | 78.12 KiB | October 19 2020 / October 20 2020 |
Nedap N.V. 11 June 2020 Subject: Confidentiality Request for: CGDSMARTDEACT and 1444A-SMARTDEACT Pursuant to FCC 47 CRF 0.457(d)(2)(i) and 0.459 and IC RSP-100, Section 6.4, the applicant requests that a part of the subject FCC application be held confidential. T: +31 (0)544 471 555 info-rs@nedap.com www.nedap-retail.com Parallelweg 2 7141 DC Groenlo The Netherlands Type of Confidentiality Requested Exhibit Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*3 Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual Nedap N.V. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:
The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:
The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:
IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, Reinold Hubers Compliance Manager Trade register: 08013836 | IBAN: NL08 ABNA 0453299555 | BIC: ANBNANL2A | VAT: NL001675801B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request.
1 2 3 | Professional installation attestation | Cover Letter(s) | 90.32 KiB | October 19 2020 / October 20 2020 |
Groenlo, 9 October 2020 Subject: KDB 353028 Attestation clause II. A 2) c) Professional Installation GDSMARTDEACT. To Whom it may concern, The Smart Deactivator model SMART DEACT, FCC ID: CGDSMARTDEACT is an Electronic Article Surveillance (EAS) system intended to be used in stores at check-out counters for deactivating 8.2MHz anti-theft alarm tags. Nedap N.V. Parallelweg 2 7141 DC Groenlo The Netherlands T: +31 (0)544 471 555 info-rs@nedap.com www.nedap-retail.com
This device must be professionally installed. The following antenna models can be installed/connected to the Smart Deactivator. 1. SDA-265x265 2. DAPL 275x275 3. MG9800I 4. NCR7878-5000 5. HN24-000002 The Smart Deactivator is a part in a complex and to be integrated in an electronic article surveillance system together with the iDCloud software system to fully customize for each individual store. Therefor a education and training is necessary for the installers. Hence also this kind of equipment is only to be sold through professional channels and is not available to the general public. A Smart Deactivator is intended for the deactivation of anti-theft tags. It is of the utmost importance that is equipment is not available to any person who could than deactivate tags in a store at will and leave the store with products without setting of a theft alarm. Installers will need to get an education on Nedap EAS equipment at Nedap HQ and receive a license to ensure correct installation. For additional (secured in depth) information an installer will get log credentials on the Nedap portal when a license is issued. Best regards, Nedap N.V. Reinold Hubers Compliance Manager Trade register: 08013836 | IBAN: NL08 ABNA 0453299555 | BIC: ANBNANL2A | VAT: NL001675801B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request.
1 2 3 | Cover letter | Cover Letter(s) | 286.34 KiB |
a SDA-265x265 and the DAPL-275x275. N.V. Nederlandsche Apparatenfabriek Nedap Parallelweg 2 NL-7141 DC Groenlo P.O. Box 6 NL-7140 AC Groenlo T +31 (0)544 471 111 F +31 (0) 544 463 475 E info@nedap.com www.nedap.com Traderegister 08013836 ABN-AMRO 59.16.32.330 IBAN NL83ABNA0591632330 BIC ABNANL2A VAT NL006456285B01 The General Terms & Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website www.nedap.com and can be provided upon request. G r o e n l o
, 0 8 O c t o b e r 2 0 1 5 S u b j e c t
A t t e s t a t i o n o f S i m i l a r i t y o f a n t e n n a S D A
2 6 5 x 2 6 5 a n d D A P L 2 7 5 x 2 7 5 R e p o r t n u m b e r
0 8 1 0 1 5
. 0 1 _ s i m T o w h o m i t m a y c o n c e r n W e
, N
. V
. N e d e r l a n d s c h e A p p a r a t e n f a b r i e k
N e d a p
, d e c l a r e t h a t t h e a n t e n n a S D A
2 6 5 x 2 6 5 h a s t h e s a m e e l e c t r i c a l p r o p e r t i e s a s t h e D A P L
2 7 5 x 2 7 5 a s m e n t i o n e d i n t e s t r e p o r t s 1 0 0 3 7 6 5 4 0 0 1
, 1 0 0 3 8 3 3 0 0 0 1 a n d 1 0 0 3 9 9 3 1 0 0 1
. T h e r e i s n o c o v e r f o r t h e S D A
2 6 5 x 2 6 5 a n t e n n a
. T h e a t t a c h e d p i c t u r e s s h o w t h e s h a p e o f t h e a n t e n n D A P L
2 7 5 x 2 7 5 D A P L
2 7 5 x 2 7 5 c o v e r r e m o v e d S D A
2 6 5 x 2 6 5 B e s t r e g a r d s
, N
. V
. N e d e r l a n d s c h e A p p a r a t e n f a b r i e k
N e d a p
J a c q u e s H u l s h o f A p p r o b a t i o n O f f i c e r
1 2 3 | Cover letter C2PC | Cover Letter(s) | 100.83 KiB |
Groenlo, 14 December 2016 Return address: PO Box 6, 7140 AA Groenlo, The Netherlands American Certification Body Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Subject: Cover letter FCC filing CGDSMARTDEACT Permissive Class II change concerning additional antennae To whom it may concern, We, N.V. Nederlandsche Apparatenfabriek "Nedap", hereby would like to apply for FCC certification of the following device:
FCC ID FRN Brand Model Type of Service Description This Permissive class II change concerns the addition of 2 new antennae. In the original application an antenna was used model SDA-265x265 (see 04_Antenna CGDSMARTDEAC.pdf).
: CGDSMARTDEACT
: 0007696149
: Nedap
: SMARTDEACT
: Permissive Class II change
: An Anti Pilferage System (FAP) operating in the band 7.800 8.500 MHz 1. Additional model: MG9800I (see 04a_Antenna CGDSMARTDEAC.pdf). 2. Additional model: NCR7878-5000 (see 04b_Antenna CGDSMARTDEAC.pdf). Manufacturer:
Company Point of Contact /Position Address/City Country Phone number/Fax number Email address Web site The following PDF files (exhibits) are electronically submitted:
: Gigatek Inc
: (Mr.) Moses Huang/Vice President
: No. 47, Hsiang Ho Road/Tan-Tzu Hsiang, Taicheng Hsien,
: Taiwan R.O.C.
: + 886 4 25375672/+ 886 4 25388836
: moses@mail.gigatek.com.tw
: www.gigatek.com.tw 1. Cover letter (this document) 2. Request for confidentiality 3. Application form 4. Antenna information (3 provided 4, 4a and 4b) 5. Bill of material 6. Circuit diagram 7. Block diagram 8. Interior photograph report 9. Exterior photograph report 10. Label location incl. label 11. Theory of Operation 12. Test report in conformity (2 provided 12 and 12a) 13. Test setup photographs (2 provided 13 and 13a) 14. Install Manual 15. Brochure N.V. Nederlandsche Apparatenfabriek Nedap Parallelweg 2 NL-7141 DC Groenlo P.O. Box 6 NL-7140 AC Groenlo T +31 (0)544 471 111 F +31 (0) 544 463 475 E info@nedap.com www.nedap.com Traderegister 08013836 ABN-AMRO 59.16.32.330 IBAN NL83ABNA0591632330 BIC ABNANL2A VAT NL006456285B01 The General Terms & Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website www.nedap.com and can be provided upon request. 16. Antenna NCR7878-5000 drawing 17. Antenna SDA-265x265 attestation Best regards, N.V. Nederlandsche Apparatenfabriek Nedap Reinold Hubers Compliance Engineer N.V. Nederlandsche Apparatenfabriek Nedap Parallelweg 2 NL-7141 DC Groenlo P.O. Box 6 NL-7140 AC Groenlo T +31 (0)544 471 111 F +31 (0) 544 463 475 E info@nedap.com www.nedap.com Traderegister 08013836 ABN-AMRO 59.16.32.330 IBAN NL83ABNA0591632330 BIC ABNANL2A VAT NL006456285B01 The General Terms & Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website www.nedap.com and can be provided upon request.
1 2 3 | 01r02 Cover letter | Cover Letter(s) | 554.30 KiB | August 04 2014 |
Groenlo, 07 April 2014 Return address: PO Box 6, 7140 AA Groenlo, The Netherlands American Certification Body, Inc Attn.: Mrs. M. Bosley Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Dear Mrs. Bosley, We, N.V. Nederlandsche Apparatenfabriek "Nedap", hereby would like to apply for FCC certification of the following device:
FCC ID FRN Brand Model Antenna Description Manufacturer:
Company Point of Contact /Position Address/City Country Phone number/Fax number Email address Web site The following PDF files (exhibits) are electronically submitted:
: CGDSMARTDEACT
: 0007696149
: Nedap
: SMARTDEACT
: SDA-265x265
: An Anti Pilferage System (FAP) operating in the band 7.400 8.800 MHz.
: Gigatek Inc
: (Mr.) Moses Huang/Vice President
: No. 47, Hsiang Ho Road/Tan-Tzu Hsiang, Taicheng Hsien,
: Taiwan R.O.C.
: + 886 4 25375672/+ 886 4 25388836
: moses@mail.gigatek.com.tw
: www.gigatek.com.tw r01: Cover letter (this document) r01: Request of Long-Term confidentiality r01: Application form 731 r01: Antenna information 1. 2. 3. 4. 5. Bill of material 6. Circuit diagrams 7. 8. 9. 10. r01: Label location incl. label 11. r01:Theory of Operation 12. r01: Test report in conformity with 47 CFR Part 15 13. Test setup photographs 14. r01: Install Manual r01: Block diagram r01: Interior photograph report r01: Exterior photograph report Best regards, N.V. Nederlandsche Apparatenfabriek Nedap Jacques Hulshof Approbation Management N.V. Nederlandsche Apparatenfabriek Nedap Parallelweg 2 NL-7141 DC Groenlo P.O. Box 6 NL-7140 AC Groenlo T +31 (0)544 471 111 F +31 (0) 544 463 475 E info@nedap.com www.nedap.com Traderegister 08013836 ABN-AMRO 59.16.32.330 IBAN NL83ABNA0591632330 BIC ABNANL2A VAT NL006456285B01 The General Terms & Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website www.nedap.com and can be provided upon request.
1 2 3 | 02r02-Request of Confidentiality | Cover Letter(s) | 552.64 KiB | August 04 2014 |
Return address: PO Box 6, 7140 AA Groenlo, The Netherlands American Certification Body, Inc Attn.: Mrs. M. Bosley Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Subject: Request of Confidentiality FCC ID: CGDSMARTDEACT Dear Mrs. Bosley, Pursuant to section 0.457(d)(2)(i) and Section 0.459 of the FCC rules we herewith request the following exhibits, related to this application for FCC ID Manufacturer Brand Model Antennae Description to be withheld from public inspection and to be kept confidential. The contents of these exhibits may not be disclosed to other parties than N.V. Nederlandsche Apparatenfabriek "Nedap" and TV Rheinland Nederland B.V.:
: CGDSMARTDEACT
: N.V. Nederlandsche Apparatenfabriek Nedap
: Nedap
: SMARTDEACT
: SDA-265x265.
: An Anti Pilferage System operating in the band 7.400 8.800 MHz Groenlo, 07 April 2014 1. Bill of materials 2. Circuit diagram 3. Block diagram 4. Theory of operation (technical description) The reason for this request for confidentiality is that the information contained in the exhibits as listed above has been classified as company confidential. Disclosure of any portion of this information to other parties would cause substantial competitive harm. Best regards, N.V. Nederlandsche Apparatenfebriek Nedap Jacques Hulshof Approbation Management N.V. Nederlandsche Apparatenfabriek Nedap Parallelweg 2 NL-7141 DC Groenlo P.O. Box 6 NL-7140 AC Groenlo T +31 (0)544 471 111 F +31 (0) 544 463 475 E info@nedap.com www.nedap.com Traderegister 08013836 ABN-AMRO 59.16.32.330 IBAN NL83ABNA0591632330 BIC ABNANL2A VAT NL006456285B01 The General Terms & Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website www.nedap.com and can be provided upon request.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-10-20 | 7.8 ~ 8.5 | FAP - Part 15 Anti-Pilferage Device | Class II Permissive Change |
2 | 2016-12-20 | 7.8 ~ 8.5 | FAP - Part 15 Anti-Pilferage Device | Class II permissive change or modification of presently authorized equipment |
3 | 2014-04-08 | 7.8 ~ 8.5 | FAP - Part 15 Anti-Pilferage Device | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2020-10-20
|
||||
1 2 3 |
2016-12-20
|
|||||
1 2 3 |
2014-04-08
|
|||||
1 2 3 | Applicant's complete, legal business name |
Nedap N. V.
|
||||
1 2 3 |
N. V. Nederlandsche Apparatenfabriek NEDAP
|
|||||
1 2 3 | FCC Registration Number (FRN) |
0007696149
|
||||
1 2 3 | Physical Address |
Parallelweg 2
|
||||
1 2 3 |
Groenlo
|
|||||
1 2 3 |
Groenlo, 7141 DC
|
|||||
1 2 3 |
Netherlands
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 2 3 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
CGD
|
||||
1 2 3 | Equipment Product Code |
SMARTDEACT
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
R**** H******
|
||||
1 2 3 | Title |
Approbation Officer
|
||||
1 2 3 | Telephone Number |
00315********
|
||||
1 2 3 | Fax Number |
00315********
|
||||
1 2 3 |
r******@nedap.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Nedap N.V.
|
||||
1 2 3 |
N.V. Nederlandsche Apparatenfabriek Nedap
|
|||||
1 2 3 | Name |
R****** H********
|
||||
1 2 3 |
J****** H****
|
|||||
1 2 3 | Physical Address |
Parallelweg 2
|
||||
1 2 3 |
6
|
|||||
1 2 3 |
Groenlo, 7141 DC
|
|||||
1 2 3 |
Netherlands
|
|||||
1 2 3 | Telephone Number |
+3154******** Extension:
|
||||
1 2 3 |
01131******** Extension:
|
|||||
1 2 3 | Fax Number |
31544********
|
||||
1 2 3 |
01131********
|
|||||
1 2 3 |
r******@nedap.com
|
|||||
1 2 3 |
J******@nedap.com
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
Nedap N.V.
|
||||
1 2 3 |
N.V. Nederlandsche Apparatenfabriek Nedap
|
|||||
1 2 3 | Name |
R****** H****
|
||||
1 2 3 |
J******** H******
|
|||||
1 2 3 | Physical Address |
Parallelweg 2
|
||||
1 2 3 |
6
|
|||||
1 2 3 |
Groenlo, 7141 DC
|
|||||
1 2 3 |
Netherlands
|
|||||
1 2 3 | Telephone Number |
01131******** Extension:
|
||||
1 2 3 | Fax Number |
01131********
|
||||
1 2 3 |
r******@nedap.com
|
|||||
1 2 3 |
J******@nedap.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | FAP - Part 15 Anti-Pilferage Device | ||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Anti-Pilferage Device | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 3 | No | |||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 | Class II permissive change or modification of presently authorized equipment | |||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | This device must be professionally installed. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Class II Permissive Change due to updating of obsolete passive components and the addition of a common mode filter as described in the filing. | ||||
1 2 3 | The antenna(s) used for this transmitter must not be co-located with any other transmitter except in accordance with FCC multi-transmitter product procedures. Class II Permissive Change for addition of new antennas. | |||||
1 2 3 | The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
TUV Rheinland Nederland B.V.
|
||||
1 2 3 | Name |
R******** v******
|
||||
1 2 3 | Telephone Number |
31-08********
|
||||
1 2 3 | Fax Number |
31-59********
|
||||
1 2 3 |
r******@nl.tuv.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 7.80000000 | 8.50000000 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 7.80000000 | 8.50000000 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 7.80000000 | 8.50000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC