FCC ID: 2AVOB-JZ7XYR RF Module

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6934357.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6934336.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Nalloy LLC 859 Willard Street, Suite 400 Quincy, MA, 02169 USA 11/09/2024 Federal Communications Commission Office of Engineering and Technology 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality, FCC ID: 2AVOB-JZ7XYR To whom it may concern:

In accordance with Sections 0.457 and Section 0.459 of the Commissions rules, 47 C.F.R. 0.457, 0.459, Nalloy LLC (Nalloy) hereby requests that the following confidential information contained within the below identified exhibits/document categories submitted pursuant to radio equipment certification requirements for FCC ID: 2AVOB-JZ7XYR be withheld from public inspection as set forth below. Long-Term Confidentiality Nalloy requests to hold permanently confidential all information contained within the below identified exhibits/document categories submitted pursuant to radio equipment certification requirements for FCC ID: 2AVOB-JZ7XYR 1. Block Diagram 2. Operational Description 3. Schematics and antenna specification 4. Parts List / Tune-Up Procedure The above material contains trade secrets and proprietary information as specified by 47 C.F.R. 0.457(d) and technical data, which is not generally known to the public and which is guarded from competitors. The public disclosure of this confidential information would be harmful to our company by unjustly depriving it, relative to its competitors, of competitive advantage resulting from its investment and innovation . These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Nalloy as confidential and proprietary trade secrets as specified by 47 C.F.R. 0.457(d). Nalloy LLC 859 Willard Street, Suite 400 Quincy, MA, 02169 USA Short-Term Confidentiality In addition to the above mentioned documents, pursuant to OETs Public Notice issued on June 15, 2004 in DA 04-1705, Nalloy requests that the Commission withhold the following documents from public inspection for one hundred eighty (180) days after the date the grant of equipment authorization is issued to enable Nalloy to maintain the confidentiality of business sensitive trade secrets and information until the actual marketing of newly authorized devices:

5. External Photographs 6. Internal Photographs 7. Test Setup Photographs 8. User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Nalloy as confidential and proprietary trade secrets as specified by 47 C.F.R. 0.457(d). This information has been disclosed only to those required to maintain its confidentiality, and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Nalloy by unjustly depriving it, relative to its competitors, of competitive advantage resulting from its investment and innovation. The period of confidentiality requested is necessary to protect the information until the commercial release of the device. Sincerely, Mohamed Negm Compliance Engineer Phone: 206 317 9828 negmmh@gmail.com Nalloy LLC 859 Willard Street, Suite 400 Quincy, MA 02169

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6934332.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case CKC Certification Services, LLC CB: US0103; NB/AB: 0976 5046 Sierra Pines Drive Mariposa, CA 95338 Phone: 1 800-500-4EMC (4362) Fax: 209-787-5568 Email: tcbadmin@ckc.com APP-FCC-A Applicant Attestation Applicant Information Company Name:

Contact Name:

Contact Title:

Company Address:

Telephone No:

Facsimile No:

Email Address:

Nalloy LLC Mohamed Negm Compliance Engineer 859 Willard Street, Suite 400, Quincy, MA 02169 206 317 9828 negmmh@gmail.com Certification Type / Equipment Identification Certification Program:

Certification Number:

FCC Equipment Authorization / Radio Certification 2AVOB-JZ7XYR The equipment identified above is / is not covered equipment prohibited from receiving an equipment authorization pursuant to 47 CFR Part 2, Subpart J, 2.903. The applicant identified above is / is not identified on the FCCs Covered List as an entity, affiliate, or subsidiary which produces equipment on the Covered List or identified as an entity which has rebranded or relabeled equipment produced by entities identified on the Covered List. I hereby attest and certify that the above statements are true and correct. Signature of Authorized Individual: 1 Printed Name:

Title of authorized signature:

Date Mohamed Negm Compliance Engineer 11/14/2023 Note this attestation shall be signed by the applicant or their direct appointee within the same legal entity. A third party agent is not permitted to sign on behalf of the applicant. 1 Signature is not subject to the FCCs authorized individual policy (KDB 852134) and may be signed by any appropriate company official. APP-FCC-A Page 1 of 2 Rev 3 CKC Certification Services, LLC CB: US0103; NB/AB: 0976 5046 Sierra Pines Drive Mariposa, CA 95338 Phone: 1 800-500-4EMC (4362) Fax: 209-787-5568 Email: tcbadmin@ckc.com Attachment A Additional Information The FCCs Covered List includes certain telecommunications equipment and video surveillance equipment produced by specific manufacturers, their Affiliates or Subsidiaries and including any products produced by these entities which are rebranded or relabeled by other entities. (191, 184, 185, 188) 2 The FCC claims the identified equipment poses an unacceptable risk to United States national security. Telecommunications Equipment (195):

Any equipment used in fixed or mobile networks that provides advanced communications service, provided the equipment includes or uses electronic components, as defined under section 1.50001(c). Video Surveillance Equipment (205):

Any equipment that is used in fixed and mobile networks that provides advanced communications service in the form of a video surveillance service, provided the equipment includes or uses electronic components. Advanced Communications Service (195, 205) Any equipment that can be used in such a fixed or mobile broadband network to enable users to originate and receive high quality voice, data, graphics, and video telecommunications service using any technology with connection speeds of at least 200 kbps in either direction. Affiliate (183):

An entity that (directly or indirectly) owns or controls, is owned or controlled by, or is under common ownership or control with, another entity, where the term own means to have, possess, or otherwise control an equity interest (or the equivalent thereof) of more than 10 percent. Subsidiary (184):

Any entity in which such named entity directly or indirectly (1) holds de facto control or (2) owns or controls more than 50% of the total voting power of the entitys outstanding voting stock. Useful Links:

FCC Covered List https://www.fcc.gov/supplychain/coveredlist 47 CFR Part 2 Subpart J (including 2.903 and 2.911) https://www.ecfr.gov/current/title-47/chapter-I/subchapter-A/part-2/subpart-J FCC KDB System:

https://apps.fcc.gov/oetcf/kdb/index.cfm FCC Report and Order 22-84 https://docs.fcc.gov/public/attachments/FCC-22-84A1.pdf 2 Parenthetical references are citations of paragraph numbers in FCC Report and Order FCC 22-84 (ET Docket 21.232). APP-FCC-A Page 2 of 2 Rev 3

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6934337.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Nalloy LLC 859 Willard Street, Suite 400 Quincy, MA, 02169 USA 11/14/2023 Federal Communications Commission Office of Engineering and Technology 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

This letter is to request Single Modular Approval in accordance with under FCC Rule Part 15.212(a)(1) for certification request under FCC ID: 2AV0B-JZ7XYR. This product is a sub-GHz RF Module and can be used in ITE and/or industrial equipment requiring data transfer over sub-GHz frequencies. Declaration of conditions. Y/N Y Y Y Y Y Y Y Y 15.212(a)(1) Condition

(i) The radio elements of the module have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements

(ii) The module has buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation.

(iii) The module has its own power supply regulation.

(iv) The module complies with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c). The antenna(s) are either permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable).

(v) The module was tested in a stand-alone configuration, i.e., the module was not inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it complies with the AC line conducted requirements found in 15.207. AC or DC power lines and data input/output lines connected to the module do not contain ferrites, unless they will be marketed with the module (see 15.27(a)). The length of these lines was the length typical of actual use or, if that length is unknown, at least 10 centimeters was used to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing were unmodified and commercially available (see 15.31(i)).

(vi) The module is equipped with either a permanently affixed label or is capable of electronically displaying its FCC identification number.

(vii) The module complies with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the applicant has provided adequate instructions along with the module to explain any such requirements.

(viii) The module complies with any applicable RF exposure requirements in its final configuration. The instructions provided with the module adequately explain any usage conditions or restrictions. I acknowledge on behalf of the applicant that compliance of this module in all final configurations is the responsibility of the applicant under the condition that the integrator follows all provided installation instructions. Sincerely, Mohamed Negm Compliance Engineer Phone: 206 317 9828 negmmh@gmail.com Nalloy LLC 859 Willard Street, Suite 400 Quincy, MA 02169