Specs&manual Model no: P02 illuminated wireless fast charging Mouse Pad
(induction system: 1 coil, max. 10W) Function description 10W single coil wireless fast charging specification 1.support Samsung 10W fast charge! support IPhone 7.5W fast charge function! (fast charge requires 9V adapter) 2.backward compatible with 5W ordinary wireless charging function!
3.GPMQ8005B supports WPC, QI V1.2.3 certification !
4. undervoltage/overvoltage/overcurrent protection, bias protection and metal foreign body detection, protective measures against over temperature (about 65 C) !
5.This PCB has extra 5V 400mA output pins for additional connection to other devices! (Wireless charging is not affected) 6.Use A11 standard coil! (the coil size is stated in the below product specs). PCB screenshot full charged: LED6 (green light) is always on!
abnormal status indication 1: LED5 (red flashing) means abnormality, for example undervoltage (less than LED status indication 1. standby: LED4 (blue) is always on!
2. be charging: LED5 (red) is always on!
3. 4. 4.2V), metal foreign object is detected. Find the reasons out and take appropriate action to correct the deviation !
5.
(LED 5; LED6 flashes until the user removes the mobile device!) abnormal status indication 2: Transmit over current, receive overvoltage and overcurrent abnormalities!
6. Over-temperature protection indication: LED5 (red light flashes and the wireless charging function is turned off, restart charging after about five minutes!) summary of charging time test mobile phone phone temperature Iphone X Iphone 8 Plus Iphone 8 Samsung Note 8 Samsung S8 Plus Samsung S8 Samsung S7 Edge 32.2 32.2 C 30.2 30.2 C 29.8 29.8 C 33.8 33.8 C 37.0 37.0 C 36.8 36.8 C 37.2 37.2 C total charging time 0%~100%
2 58 2 hours and 58 minutes 2 41 2 hours and 41 minutes 2 21 2 hours and 21 minutes 3 24 3 hours and 24 minutes 2 56 2 hours and 56 minutes 2 48 2 hours and 48 minutes 3 03 3 hours and 3 minutes battery capacity 2716mAh 2675 mAh 1821 mAh 3300 mAh 3500 mAh 3000 mAh 3600 mAh FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.