FCC ID: RAYVHFRS40B Marin VHF Radio

Channel declarat We, Navico Inc. _declare that this EUT (FCC ID function on non-US/Canada frequencies. In adc disabled by firmware for devices marketed to th only channels 1-11 will be used in North Americ Should you have any questions or comments attention. Sincerely, Print Name: Filippo Campolmi Signature: Cfo: SLyo On behalf Navico Inc. Telephone: +39 0571681232 ion of 2.4G WLAN

- RAYVHFRS40B) doesnt have ad Hoc Mode lition, the frequency selection feature is e US/ Canada. For DTS part of this device, a. Country code selection is disabled.

; regarding this matter, Please have my best Title: Regulatory Compliance Manager E-mail: filippo.campolmi@navico.com

Coast Guard Approval Number: 165.156/43/1 Expires: 19 September 2027 SHIPBORNE AUTOMATIC IDENTIFICATION SYSTEM (AIS) CLASS B CS Navico Auckland Limited Arrenway Drive Rosedale Auckland 0632 NEW ZEALAND B&G V60-B Automatic Identification System (AIS) Class B CS with Marine VHF Radio The B&G V60-B AIS Class B CS meets the requirements as set forth in:

IMO Resolution A.694(17) IMO Resolution MSC.74(69) Annex 3 IEC 60945 (2002) with Corrigendum 1 (2008) IEC 61162 (applicable part) IEC 62287-1 (2017) ITU-R M.1371 B&G V60-B AIS Class B CS consists of the following equipment:

B&G V60-B Marine VHF Radio - Model RS40-B Hardware Software MCU Main Board: Rev. H Whole Unit: V4.46 RF Board: Rev. IG MCU Main Board: V4.46 AIS Board: Rev. B AIS Board: V4.46 Port/connector Board: Rev. A Amplifier Filter Board: Rev. D Keyboard: Rev. B This approval only covers the AIS functionality of the B&G V60-B. Federal Communications Commission (FCC) certification is required. Supersedes certificate 165.156/43/0 dated 23 May 2019 to reflect use of an alternative microcontroller unit (MCU) board

*** End ***

THIS IS TO CERTIFY THAT the above named manufacturer has submitted to the undersigned satisfactory evidence that the item specified herein complies with the applicable laws and regulations as outlined on the reverse side of this Certificate, and approval is hereby given. This approval shall be in effect until the expiration date hereon unless sooner canceled or suspended by proper authority. GIVEN UNDER MY HAND THIS 19 DAY OF SEPTEMBER 2022, AT WASHINGTON D.C. F. A. STROM, CDR CHIEF, SYSTEMS ENGINEERING DIVISION BY DIRECTION OF THE COMMANDANT DEPT. OF HOMELAND SECURITY, USCG, CGHQ-10030

(REV. 3-03) TERMS: The approval of the item described on the face of the Certificate has been based upon the submittal of satisfactory evidence that the item complies with the applicable provisions of the navigation and shipping laws and the applicable regulations in Title 33 and/or Title 46 of the Code of Federal Regulations. The approval is subject to any conditions noted on this Certificate and in the applicable laws and regulations governing the use of the item on vessels subject to Coast Guard inspection or on other vessels and boats. Consideration will be given to an extension of this approval provided application is made 3 months prior to the expiration date of this Certificate. The approval holder is responsible for making sure that the required inspections or tests of materials or devices covered by this approval are carried out during production as prescribed in the applicable regulations. The approval of the item covered by this certificate is valid only so long as the item is manufactured in conformance with the details of the approved drawings, specifications, or other data referred to. No modification in the approved design, construction, or materials is to be adopted until the modification has been presented for consideration by the Commandant and confirmation received that the proposed alteration is acceptable. NOTICE: Where a manufacturer of safety-at-sea equipment is offering for sale to the maritime industry, directly or indirectly, equipment represented to be approved, which fails to conform with either the design details or material specifications, or both, as approved by the Coast Guard, immediate action may be taken to invoke the various penalties and sanctions provided by law including prosecution under 46 U.S.C. 3318, which provides:

"A person that knowingly manufactures, sells, offers for sale, or possesses with intent to sell, any equipment subject to this part (Part B. of Subtitle II of Title 46 U.S.C.). and the equipment is so defective as to be insufficient to accomplish the purpose for which it is intended, shall be fined not more than $10,000, imprisoned for not more than 5 years or both."

Commandant United States Coast Guard Martin Luther King Jr. Ave. SE, Stop 7509 Washington, DC 20593-7509 Staff Symbol: CG-ENG-3 Phone: (202) 372-1375 Fax: (202) 372-8379 Email: TypeApproval@uscg.mil 2022-2767 16714 / 165.156 September 19, 2022 Mr. John Lloyd Navico Auckland Limited Arrenway Drive Rosedale Auckland 0632 NEW ZEALAND Subj:

AUTOMATIC IDENTIFICATION SYSTEMS CLASS B CS; MODIFICATION We have reviewed the materials submitted by Ms. Jing Song of SGS-CSTC Standards Technical Services on your behalf requesting review of the modification to the B&G V60-B and SIMRAD RS40-B. These units continue to meet the requirements of the applicable AIS Class B CS international standards. The revised Certificates of Approval (COA) are enclosed. Each COA will remain valid for five years from the date of issuance, unless we suspend, withdraw, or terminate it. Terms of approval are on the reverse of the certificates. Any changes or alternation of components, construction or manufacturing location of the products may require the products to undergo additional testing, or requalification in order to keep their approval. This letter and all attachments were delivered electronically to John.Lloyd@navico.com. No hard copies will be provided. You are welcome to print as many copies as you wish. If you have any follow-up to this approval, please contact Raymond Martin at raymond.w.martin@uscg.mil or typeapproval@uscg.mil. Please reference ID#: 2022-2767 in any correspondence related to this project. Sincerely, F. A. STROM. Commander, U.S. Coast Guard Chief, Systems Engineering Division Office of Design and Engineering Standards By direction Encl:

1. U.S. Coast Guard Certificate of Approval Number 165.156/42/1 dated 19 September 2022 2. U.S. Coast Guard Certificate of Approval Number 165.156/43/1 dated 19 September 2022

Coast Guard Approval Number: 165.156/42/1 Expires: 19 September 2027 SHIPBORNE AUTOMATIC IDENTIFICATION SYSTEM (AIS) CLASS B CS Navico Auckland Limited Arrenway Drive Rosedale Auckland 0632 NEW ZEALAND SIMRAD RS40-B Automatic Identification System (AIS) Class B CS with Marine VHF Radio SIMRAD RS40-B AIS Class B CS meets the requirements as set forth in:

IMO Resolution A.694(17) IMO Resolution MSC.74(69) Annex 3 IEC 60945 (2002) with Corrigendum 1 (2008) IEC 61162 (applicable part) IEC 62287-1 (2017) ITU-R M.1371 SIMRAD RS40-B AIS Class B CS consists of the following equipment:

Marine VHF Radio - Model RS40-B Hardware Software MCU Main Board: Rev. H Whole Unit: V4.46 RF Board: Rev. IG MCU Main Board: V4.46 AIS Board: Rev. B AIS Board: V4.46 Port/connector Board: Rev. A Amplifier Filter Board: Rev. D Keyboard: Rev. B This approval only covers the AIS functionality of the SIMRAD RS40-B. Federal Communications Commission (FCC) certification is required. Supersedes certificate 165.156/42/0 dated 23 May 2019 to reflect use of an alternative microcontroller unit (MCU) board

*** End ***

THIS IS TO CERTIFY THAT the above named manufacturer has submitted to the undersigned satisfactory evidence that the item specified herein complies with the applicable laws and regulations as outlined on the reverse side of this Certificate, and approval is hereby given. This approval shall be in effect until the expiration date hereon unless sooner canceled or suspended by proper authority. GIVEN UNDER MY HAND THIS 19 DAY OF SEPTEMBER 2022, AT WASHINGTON D.C. F. A. STROM, CDR CHIEF, SYSTEMS ENGINEERING DIVISION BY DIRECTION OF THE COMMANDANT DEPT. OF HOMELAND SECURITY, USCG, CGHQ-10030

(REV. 3-03) TERMS: The approval of the item described on the face of the Certificate has been based upon the submittal of satisfactory evidence that the item complies with the applicable provisions of the navigation and shipping laws and the applicable regulations in Title 33 and/or Title 46 of the Code of Federal Regulations. The approval is subject to any conditions noted on this Certificate and in the applicable laws and regulations governing the use of the item on vessels subject to Coast Guard inspection or on other vessels and boats. Consideration will be given to an extension of this approval provided application is made 3 months prior to the expiration date of this Certificate. The approval holder is responsible for making sure that the required inspections or tests of materials or devices covered by this approval are carried out during production as prescribed in the applicable regulations. The approval of the item covered by this certificate is valid only so long as the item is manufactured in conformance with the details of the approved drawings, specifications, or other data referred to. No modification in the approved design, construction, or materials is to be adopted until the modification has been presented for consideration by the Commandant and confirmation received that the proposed alteration is acceptable. NOTICE: Where a manufacturer of safety-at-sea equipment is offering for sale to the maritime industry, directly or indirectly, equipment represented to be approved, which fails to conform with either the design details or material specifications, or both, as approved by the Coast Guard, immediate action may be taken to invoke the various penalties and sanctions provided by law including prosecution under 46 U.S.C. 3318, which provides:

"A person that knowingly manufactures, sells, offers for sale, or possesses with intent to sell, any equipment subject to this part (Part B. of Subtitle II of Title 46 U.S.C.). and the equipment is so defective as to be insufficient to accomplish the purpose for which it is intended, shall be fined not more than $10,000, imprisoned for not more than 5 years or both."

August 15, 2022 Subject: Application for New Certification, FCC ID: RAYVHFRS40B Dear Application Examiner, The purpose of this filing is to apply for a Class II permissive change(C2PC) of a marine device. The device is used to communicate wirelessly to a ship mounted on a vessel while it is at sea. The device is equipped with VHF/DSC/AIS radio, 2.4G WiFi and GNSS receiver;

VHF transmitting band: 156.025MHz-157.425MHz, WiFi transmitting band: 2412MHz-2462MHz, AIS transmitting band: 161.975MHz (CH87) and 162.025 MHz (CH88), DSC transmit band:156.525 MHz (CH70), VHF receive band 156.05 MHz-163.275 MHz, GNSS receive band 1559 MHz-1610 MHz. Please be notified that we, the undersigned, (Navico Inc.) declare that the reasons for this C2PC are as below:

just replaces the MCU supplier, the PCB layout on the motherboard and the MCU PIN pin is exactly the same, and the specification is the same as previous. Hardware Version:

MCU Main Board: Rev. H RF Board: Rev. IG AIS Board: Rev.B Port/ connector Board: Rev. A Amplifier Filter Board: Rev. D Key Board: Rev. B Software Version:

Whole Unit: V4.46 MCU Main Board: V4.46 AIS Board: V4.46 Your efforts in reviewing this application are greatly appreciated. Please contact me if there are questions or additional information needed concerning this request. Sincerely, Winkey Wang, EMC Technical Manager Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Authorized agent for: NAVICO AUCKLAND LIMITED Fuyong lab. Xinlong TechnoPark, Fengtang Road, Fuyong Subdistrict, Baoan, Shenzhen, China Tel: +86 755 8866 3988 Fax: +86 755 2671 0594

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Compliance Statement of Selective Calling Equipment. FCC ID: RAYVHFRS40B Dear Examiner:

This is to confirm this Class D DSC equipment complying with the ITU-R M493-13 requirements. IEC 62238 compliance is reported in this application. Please proceed to accept this FCC Grant application. Sincerely, Print Name: Winkey Wang Title: EMC Technical Manager Signature:

(signed under explicitly written authorization from Grantee) On behalf of Company: Compliance Certification Services (Kunshan) Inc. Shenzhen Branch E-mail: winkey.wang@sgs.com