Digital Home Health Scale Model DHH-10BT Operator Manual July 15, 2019 PN 196008 Contents Contents 1.0 2.0 Introduction ................................................................................. 1 1.1 Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Assembly ..................................................................................... 3 2.1 Scale Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Unit Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operation ..................................................................................... 6 3.1 DHH-10BT Wireless Scale Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Wireless Scale Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Wireless Scale Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Wireless Scale Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.0 FCC Statement ..........................................................................10 3.0 Introduction 1.0 The DHH-10BT is efficiently designed to provide accurate, reliable and repeatable weight measurements. Introduction Figure 1-1. DHH-10BT Top View 1 DHH10-BT Safety 1.1 Safety Signal Definitions:
DANGER WARNING CAUTION Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. Includes hazards that are exposed when guards are removed. Indicates a potentially hazardous situation that, if not avoided could result in serious injury or death. Includes hazards that are exposed when guards are removed. Indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury. IMPORTANT Indicates information about procedures that, if not observed, could result in damage to equipment or corruption to and loss of data. General Safety Do not operate or work on this equipment unless this manual has been read and all instructions are understood. Contact any Rice Lake Weighing Systems dealer for replacement manuals. WARNING Failure to heed may result in serious injury or death. Do not transport the scale while someone is standing on it. To avoid cross contamination, the scale should be cleaned regularly. Do not use chemical or abrasive cleaning agents. Avoid contact with excessive moisture. Do not jump on the scale. Do not place fingers into slots or possible pinch points. Do not use in the presence of flammable materials. Use the scale only to determine weight of people while standing. Do not make alterations or modifications to the scale. People with disabilities, or who are physically frail, should always be assisted by another person when using this scale. Do not use the scale on slippery surfaces, such as a wet floor. Do not use this scale when the body/feet are wet, such as after taking a bath. Weight exceeding the maximum capacity may damage the scale. Do not drop the scale or subject it to violent shocks. For accurate weighing, the scale must be placed on a flat, stable surface. 2 Assembly Assembly 2.0 Place the shipping container in an open area with room for unpacking. Ensure the shipping container is free of any outside damage. If there is damage, do not open the shipping container, take pictures of the damage and notify Rice Lake Weighing Systems and the shipper immediately. IMPORTANT Retain the original shipping materials and container should the product need to be returned. The product must be properly packed with sufficient packing materials prior to being moved or shipped. Damage caused by improper packaging is not covered by the warranty. Scale Setup 2.1 Use the following sections to set up the scale. 2.1.1 Battery Installation Requires 2 AAA batteries (included). 1. Open the battery compartment cover on the back of the scale. 2. Remove the red tab before use. Figure 2-1. Battery Compartment 3. Install batteries with negative end of batteries against the spring in +/- orientation. Note Wait for scale to display 0.0 before stepping on scale. 3 DHH10-BT Battery Troubleshooting 2.1.2 If you are having difficulty turning off or on the scale, there may be an issue with battery placement or battery power. Power On Failure If the scale fails to turn on, check whether batteries are properly installed. Insert or replace batteries. If you cannot resolve the problem, please contact your dealer for help. Power Off Failure If the scale will not turn off or if auto shut-off takes more than 12 seconds, remove the batteries for three or more seconds, then reinstall the batteries. If you cannot resolve the problem, please contact your dealer for help. Low Battery Indication If Lo is shown on the display, battery power is low. Install new batteries. Battery Life Scale Battery Life (Twice Per Day) DHH-10BT 5 Months Table 2-1. Battery Life 4 Unit Conversion 2.1.3 To convert between kilogram (kg) and pound (lb) units:
1. Locate the KG/LB button on the back of the scale next to the battery compartment. Assembly KG/LB Button Figure 2-2. DHH-10BT KG/LB Button 2. Push the KG/LB button to switch scale between kg-lb unit of measure. 5 Operation Operation DHH-10BT Wireless Scale Operation 3.0 3.1 The following sections are for DHH-10BT operation. The sections explain how to connect and operate your wireless scale with the AccuroFit application. 3.1.1 Wireless Scale Connection 1. Turn on Bluetooth in your smart devices settings. 2. Download the AccuroFit app. Figure 3-1. AccuroFit App Note The AccuroFit application is available for Apple and Android. 3. Create an account and set up a profile. 4. A Choose your device message will pop up. Choose a device if you have one or select skip for now. Figure 3-2. Select Device Screen 6 DHH10-BT 5. Click on My Body at the bottom of the screen. Figure 3-3. My Body Screen 6. Click Connect To Scale. 7. Make sure you are near the scale. The message, please select your scale type will appear. Select Bluetooth Scale and press Continue. Figure 3-4. Bluetooth Scale Selection Screen Note You must connect to the scale before every weigh-in. 7 3.1.2 Wireless Scale Operation 1. To ensure accuracy, place the scale on a hard, flat surface. Make sure there are no objects beneath the scale before weighing. Operation 2. Make sure other smart devices in the area that also have the AccuroFit app installed have Bluetooth turned off (the smart device closest to the scale will receive the new weight measurement). 3. Open the AccuroFit app and navigate to the Weight screen by clicking My Body. 4. Make sure Bluetooth on your smart device is turned on. Click Connect To Scale. 5. Wait for Please step on the scale message to appear in the top center of the app screen before stepping on the scale. Figure 3-5. Step on Scale Message 6. Gently step on the scale, the scale will automatically turn on. Note A Read Timeout Message will appear in the top center of the screen if you take more than 30 seconds to step on the scale. If this message appears, re-
connect the scale. 7. Stand evenly on the scale without moving and wait until your weight on the display is stable and locked. The display will flash three times when it is locked.Your current weight will simultaneously be saved to your AccuroFit account and will appear on the app screen. 8. A Please step off the scale and Successful message should appear in the top center of the app screen. 9. When you step off the scale, it will automatically shut off in approximately 12 seconds. Note You must connect to the scale before every weigh-in. Overload Indication Scale overload (maximum weight capacity is indicated on the back of the scale). Step off to avoid damage. Re-Weigh Indication Weight reading error. Wait for the scale to turn off and repeat the weighing process. 8 DHH10-BT 3.1.3 Wireless Scale Troubleshooting If you are having difficulty operating with wireless, there may be an issue with Bluetooth connection or app and wireless scale connection. Bluetooth Connection Failure Turn Bluetooth OFF and then ON on your smart device to re-establish the connection. If the problem persists, restart your smart device. App and Wireless Scale Connection Failure Make sure your smart device is within range of the scale and your Bluetooth is turned ON. To reconnect the scale, use the following steps:
1. Open the AccuroFit app. 2. Click the connect to scale button on the Weight screen. 3. Gently step on scale. 4. If the scale does not respond, check the batteries in the scale as they may need replacing. If the weight is not updating on the app, check the top center of the weight screen. If there is a Read Timeout message displayed, re-connect the scale. 5. 9 4.0 FCC Statement FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 10