FCC ID: CGDVP1001B RFID Device

Instruction Manual VP1001-B Safety Instructions 5287766 / Version 01.000 / April 2020 / EN Original instructions Livestock Management Copyright Copyright Nedap N.V. All rights reserved. The information in this document is subject to change without notice, it is not to be reproduced in any way, in whole or in part, without the written consent of Nedap N.V. All trademarks referenced belong to their respective owners. Disclaimer Nedap N.V. has made every effort to ensure the accuracy of the information contained in this document. However, Nedap N.V. makes no representations or warranties whatsoever whether express or implied as to the accuracy, correctness, completeness or t-for-purpose or suitability for the purpose of this product. You use the products at your own risk. Nedap N.V. excludes any liability to the maximum extent permitted by applicable law for the damages caused by errors or failures made during the installation or improper use of this product or by not applying the instructions stated in this document. Nedap N.V. reserves the right to make improvements or amendments to this document and/or the products described therein at any time without any notication. The latest version of this document can be found on the Nedap Livestock Management business portal (www.nedap.com/livestockmanagement-portal). Please download the latest version of this document (by yourself or reseller) and keep a copy for your own records. This document can be published in various languages but only the English language version will prevail. Nedap N.V. assumes no responsibility for any errors caused for the translations into another language. Warranty and spare parts Please consult the Nedap products dealer from whom you purchased this product, in regards to the applicable warranty conditions. This product cannot be used for any other purpose as described in this document. If the product is not installed according to this document; the warranty provided is not applicable. At the sole discretion of Nedap N.V., Nedap N.V. may decide to change the conditions of the warranty policy. You agree that Nedap N.V. is able to compensate you the pro-rata value of the warranty involved rather than replacing or repairing the product depending on the technical or economical value of the product. Prior to applying the warranty, please verify if you comply with the warranty conditions of the warranty policy, whether you can successfully apply for the replacement or repair of a defective part. Parts can only be replaced with original Nedap parts, otherwise the warranty policy will not be applicable on the product. If the warranty is applicable, please contact the dealer or send the defective parts to the dealer. Additional information For any information or questions regarding the product, please contact your own dealer. VP1001-B VP1001-B / Safety Instructions 5287766 / Version 01.000 / April 2020 / EN 1 Livestock Management Content 1 2 Safety .................................................................................................. 3 Compliance .......................................................................................... 5 VP1001-B / Safety Instructions 5287766 / Version 01.000 / April 2020 / EN 2 Livestock Management 1 Safety Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual may result in serious injury or death. Keep this manual in a safe location for future reference. Symbols used in the manual Danger Warning Caution Indicates a hazardous situation that, if not avoided, will result in death or serious injury. Indicates a hazardous situation that, if not avoided, could result in death or serious injury. Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. Indicates important information but not hazard related. Suggestions and advice to perform certain tasks more easily. General safety instructions Warning Always turn off the mains power supply when working on the electrical installation. Warning Always wear proper protection when installing and maintaining the VP1001-B. Caution Use the VP1001-B only with a suitable power supply. The power supply or power adapter must comply with local regulations for a SELV, limited power (NEC class2, ps2) output (e.g. Nedap VP2001-B or Nedap power adapter (P/N 9223126)). Caution Installation and service should only be done by locally qualied personnel. Caution Install the system according to the local rules and regulations. Working environment Caution The installation area must be free from any obstacles, including animals. VP1001-B / Safety Instructions 5287766 / Version 01.000 / April 2020 / EN 3 Livestock Management Caution Make sure all components are installed out of reach of animals. Caution Make sure all cables are properly concealed, and form no danger for stumbling. Caution Take into account the high concentrations of ammonia when installing and maintaining the VP1001-B in pig barns. Animal welfare and safety The automated actions of the Nedap Livestock Management systems do never discharge the installer and the user of the system from his/her responsibility to assure and to take care of the well-being of the animals. VP1001-B / Safety Instructions 5287766 / Version 01.000 / April 2020 / EN 4 Livestock Management 2 Compliance FCC and ISED Compliance statement This device complies with part 15 of the FCC Rules and with RSS-210 of Innovation, Science and Economic Development Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Cet appareil se conforme aux normes CNR-210 exempts de license d'Innovation, Sciences et Dveloppement conomique Canada. L'opration est soumis aux deux conditions suivantes: (1) cet appareil ne doit causer aucune interfrence, et (2) cet appareil doit accepter n'importe quelle interfrence, y inclus interfrence qui peut causer une operation non pas voulu de cet appareil. Les changements ou modications n'ayant pas t expressment approuvs par la partie responsable de la conformit peuvent faire perdre l'utilisateur l'autorisation de faire fonctionner le matriel. FCC and ISED Radiation Exposure Statement This equipment complies with FCC and Canadian radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 3 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme a CNR-102 limites nonces pour un environnement non contrl.Cet quipement doit tre install et utilis avec une distance minimale de 3 cm entre le radiateur et votre corps. FCC and ISED Information to the user Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequent energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver. Consult the dealer or an experienced radio/TV technician for help. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To ensure compliance with FCC regulations, use only the shielded interface cables provided with the product, or additional specied components or accessories that can be used with the installation of the product. This Class B digital apparatus complies with the Canadian standard ICES-003. Cet appareil numrique de Classe B est conforme la norme Canadienne ICES-003. VP1001-B / Safety Instructions 5287766 / Version 01.000 / April 2020 / EN 5 Livestock Management Antennas Disposal CE This device may be used with the following Nedap antennas: Single Loop Walk Through, Single Loop Walk Over, VP6011, VP6012, VP6030, VP6040, VP6041, VP6042 and VP6050. Antennas VP6041 and VP6042 are identical. However, model VP6041 is adjusted for environments with lots of steel for short distances. The VP6042 is adjusted for longer distances (1 m) recognition. symbol in Europe indicates that the relevant electrical product or battery should not be disposed The WEEE of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive WEEE 2012/19/EU). Hereby NEDAP N.V. declares that the subject equipment is in compliance with the directives 2014/53/

EU(Radio Equipment Directive) and 2011/65/EU (Restriction of the use of certain hazardous substances). The full text of the EU declaration of conformity is available at our Business Portal: http://www.nedap.com/

livestockmanagement-portal. VP1001-B / Safety Instructions 5287766 / Version 01.000 / April 2020 / EN 6 Livestock Management

Label info Warning/statement label Location , see next page Product as positioned on back side of the device Location of warninglabel on device

July 26, 2019 Nedap N.V. Parallelweg 2 7141 DC Groenlo The Netherlands T: +31 (0)544 471 111 info@nedap.com www.nedap.com Authority to Act as Agent TUV Rheinland of North America, Inc. 1279 Quarry Ln., Ste. A Pleasanton, CA 94566 To Whom It May Concern:

I appoint Richard van der Meer of TV Rheinland Nederland B.V. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TV Rheinland Group, still resides with Nedap N.V. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

By:

Title:

On behalf of:

_Compliance Manager________ Telephone:__+31 5440471111________________________ __________________________ __Reinold Hubers_________

(Print name) _ _Nedap N.V.___________ August 01, 2020

(Signature) Trade register: 08013836 | IBAN: NL08 ABNA 0453299555 | BIC: ANBNANL2A | VAT: NL006456285B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request.

Nedap N.V. Parallelweg 2 7141 DC Groenlo The Netherlands April 1, 2020 Subject: Confidentiality Request for FCC ID: _CGDVP1001B and IC: 1444A-VP1001B And FCC ID: _CGDVP1006B and IC: 1444A-VP1006B Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. T: +31 (0)544 471 111 info@nedap.com www.nedap.com Type of Confidentiality Requested Short Term Permanent Short Term Permanent Short Term Permanent Exhibit Block Diagrams Operation Description/Theory of Operation Schematics Nedap N. V. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

(Signature/Title) _Reinold Hubers____ Compliance Manager

(Print name) Trade register: 08013836 | IBAN: NL08 ABNA 0453299555 | BIC: ANBNANL2A | VAT: NL006456285B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request.

Eiberkamp 10 9351VT Leek The Netherlands

. TV Rheinland Nederland B.V. To whom it may concern, On behalf of our customer Nedap N.V., we hereby declare the antenna of the following device:

FCC ID: CGDVP1001B IC: 1444A-VP1001B Manufacturer: Nedap N.V. Brand: Nedap Model: VP1001B The VP1001B may be used with the following magnetic loop antennas:

Single Loop Walk Through, Single Loop Walk Over, VP6011, VP6012, VP6030, VP6040, VP6041, VP6042 and VP6050. All branded Nedap. Antenna dimensions (cm) Antenna Single Loop Walk Through 100 by 195-210 Antenna Single Loop Walk Over Antenna VP6011 Antenna VP6012 Antenna for VP6030 Antenna VP6040 Antenna VP6041 Antenna VP6042 Antenna VP6050 80 by 120 24 by 12,5 24 by 12,5 28 by 39 2 times 64,6 x 30,3 and 64,6 by 59,2 2 times 47,6 by 38,8 2 times 47,6 by 38,8 47,6 by 117,6 Antenna VP6041 and VP6042 are identical. However, model VP6041 is adjusted for environments with lots of steel for short distances. The VP6042 is adjusted for longer distances (1 m) recognition. Best regards, TV Rheinland Nederland B.V. R. van der Meer Test Engineer

. l a v o r p p a r o i r p s e r i u q e r n o i t a c i l p p a d n a n o i t a s i l i t U i

. s k r a m e d a r t d e r e t s g e r e r a V U T d n a V E U T

, V T