FCC ID: CGDIFERB Smarttag-B Neck

Quick start manual SmartTag Neck How to attach the SmartTag Neck A = Front of the SmartTag Neck B = SmartTag number Additional information Technical information Nedap SmartTags are 3 Vdc battery operated RFID transmitters, operating at 434 MHz with < 1mW E.r.p. The tags are watertight (IP67) and operate between -10 to 50 C (14 to 122 F). Disposal The WEEE symbol in Europe indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive WEEE 2012/19/EU). SmartTag Neck / Quick start manual 5281105 / Version 03.000 / August 2022 / EN 1 Dairy Farming Warranty and spare parts Please consult the Nedap products dealer from whom you purchased this product, in regards to the applicable warranty conditions. This product cannot be used for any other purpose as described in this document. If the product is not installed according to this document; the warranty provided is not applicable. At the sole discretion of Nedap N.V., Nedap N.V. may decide to change the conditions of the warranty policy. You agree that Nedap N.V. is able to compensate you the pro-rata value of the warranty involved rather than replacing or repairing the product depending on the technical or economical value of the product. Prior to applying the warranty, please verify if you comply with the warranty conditions of the warranty policy, whether you can successfully apply for the replacement or repair of a defective part. Parts can only be replaced with original Nedap parts, otherwise the warranty policy will not be applicable on the product. If the warranty is applicable, please contact the dealer or send the defective parts to the dealer. Compliance FCC/IC This device complies with part 15 of the FCC Rules and to RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Cet appareil se conforme aux normes CNR 210 exempts de license d'Innovation, Sciences et Dveloppement conomique Canada. L'opration est soumis aux deux conditions suivantes:(1) cet appareil ne doit causer aucune interfrence, et (2) cet appareil doit accepter n'importe quelle interfrence, y inclus interfrence qui peut causer une operation non pas voulu de cet appareil. Les changements ou modications n'ayant pas t expressment approuvs par la partie responsable de la conformit peuvent faire perdre l'utilisateur l'autorisation de faire fonctionner le matriel. CE - UKCA declaration Hereby NEDAP N.V. declares that the subject equipment is in compliance with:

For CE: Directives 2014/53/EU(Radio Equipment Directive) and 2011/65/EU (Restriction of the use of certain hazardous substances). For UKCA: SI2017/1206 (UK Radio Equipment Regulations 2017) and SI2012/3032 (Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (RoHS)). The full text of the declarations of conformity is available at https://nedap.com/livestockmanagement-portal where, if applicable, also REACH information can be found. NCC Special Statement Copyright and Disclaimer Copyright Nedap N.V., Parallelweg 2, NL-7141 DC Groenlo, The Netherlands. This document is property of Nedap N.V. and the content is not to be reproduced in any way, in whole or in part, without the prior written consent of Nedap N.V. Nedap N.V. makes no representations or warranties whether express or implied as to the accuracy, correctness, completeness of this document. If this document is part of the installation manual, the installation manual will be leading. You use the products at your own risk. Nedap N.V. reserves the right to make changes to this document and/or the products described. Please consult the Nedap Livestock Management business portal (www.nedap.com/livestockmanagement-portal) for any changes or notication. Parallelweg 2 NL-7141 DCGroenlo The Netherlands

1 e g a p Version Date Author Checked by 0.1 02-12-2022, rev. 22-06-2023 K. Damhuis A.P. Haytema Model differences The models are identical w.r.t. pcb lay-out, component placement and transmitting circuitry. Difference is made by software features and optional identification LF ferrite coil. SmartTag-B Neck series, model breakdown Type Model SmartTag-B Neck FE4 IFE4 FER4 IFER4 Identification Fertility X X X X X X Features Eating X X X X Rumination X X Model SmartTag-B Neck IFER4 is considered as representative for this document since it contains the maximum features. Front of the Tag Location of the label - On backside of the assembled tag. 2 e g a p Sample of label (all models) Typedesignation (1 example) - laser imprinted on front

>;nedap U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company name: Nedap Inc FRN: 0033769050 Contact person name: Gal Gozdek Street address: 25 Corporate Drive, Ste. 101 ZIP/City/State Burlington, MA 01803 USA Telephone number: 001 781 349 6200 Email address:

Signature:

Date:

S-t2- 223 Nedap N.V. Parallelweg 2 7141 DC Groenlo The Netherlands T: +31 (0)544 471111 info@nedap.com www.nedap.com 1/1 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Nedap N.V. Grantee Code: CGD Contact person name: Anne Pieter Haytema Street address: Parallelweg 2, NL-7141 DC, ZIP/City/State/Country Groenlo, The Netherlands Telephone number: 00 31 544 471 825 Email address: annepieter.haytema@nedap.com Signature:

Date: ( 7 \

($-S- 202)

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6644498.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Nedap N.V. Parallelweg 2 7141 DC Groenlo The Netherlands T: +31 (0)544 471 111 info@nedap.com www.nedap.com Authority Letter Date: June 21, 2023 KIWA Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn P.O. Box 137 7300 AC Apeldoorn The Netherlands To Whom It May Concern:

Anne Pieter Haytema of Nedap N.V. is authorized to act on our behalf, until otherwise notified, for applications to KIWA Nederland B.V. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: 12 months By: Reinold J.W. Hubers Title: Compliance Manager On behalf of: Nedap N.V. Trade register: 08013836 | IBAN: NL83 ABNA 0591632330 | BIC: ABNANL2A | VAT: NL006456285B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request.

Certification Application Attestation Statements Nedap N.V. Parallelweg 2 7141 DC Groenlo The Netherlands T: +31 (0)544 471 111 info@nedap.com www.nedap.com Nedap N.V. Parallelweg 2 NL-7141 DC Groenlo, The Netherlands Subject: FCC ID: CGDIFERB To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) 1/1 Nedap N.V. certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: N/A Statement for 47 CFR section 2.911(d)(5)(ii) Nedap N.V. (the applicant) certifies that, as of the date of the filing of this application, the applicant is not identified on the Covered List as an entity producing covered equipment. Date:

City:

Name(2) :

Function:

Telephone number:

Email address:

Signature:

22-06-2023 Groenlo, The Netherlands Anne Pieter Haytema Product Compliance Manager 00 31 544 471 825 annepieter.haytema@nedap.com 1 - The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code owner or the authorized agent.(3): double click on the appropriate box and select checked then OK Trade register: 08013836 | IBAN: NL83 ABNA 0591 6323 30 | BIC: ABNANL2A | VAT: NL006456285B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request.

FCC, Request for non-disclosure RF_501, Issue 9 Date: 08-Oct-2021 Page 1 of 1 Company Name: Nedap N.V. Address:

Parallelweg 2 Groenlo City:

The Netherlands Country:

To: Telefication B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: CGDIFERB Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

x Bill(s) of Material x Block Diagrams x Operational Description x Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):

x Internal Photos Users Manual x Test Set-up Photos External Photos Justification: For competitive reasons Date: 22-06-2023 Name and signature of applicant: A.P. Haytema Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period