FCC ID: 2ALP4-NMI01WTV2 Slim Touch

SLIMTOUCH 4. Battery Exchange Slimtouch is powered by 2 CR2032 batteries. To insert the battery proceed as follows:

Remove the cover. Insert the batteries with the positive pole facing the wall. Place the cover. 5. Registering the Slimtouch To register the keypad, use the Neocontrol Pro APP, and add a new device. Scan the QR code located on the upper right corner. Follow the APP instructions. www.neocontrolglobal.com Document version - v.01 www.neocontrolglobal.com Neocontrol US LLC. Copyright 2019 All rights reserved. ENGLISH To ensure safety, please read this manual carefully before installation and follow the instructions herein. Prior to installation, make sure that the power outlet of the place you are installing the device follows the instruction indicated on the devices label. Sensitive to humidity! The device must not come in contact with liquids or be exposed to excessive moisture environments. Fragile. Handle the device carefully, avoid impacts. Recyclable product. Dispose appropriately in the proper facilities. This is a free manual and part of the product, thus, it can not be sold separately, copied or duplicated without the prior written permission of Neocontrol US LLC. 1. Slimtouch Slimtouch is a wireless keypad that can be used with the Box 98 to control window treatment devices. It has 6 touch-screen pads that can activate up to 6 automation scenes previously created on the Neocontrol Pro APP. 2. Technical information Power Supply: 2 battery 3V (CR2032) Trigger up to 6 scenes Does not require infrastructure Low battery consumption Data communication: RF command (only TX) Compatible with Box 98;

Radio Frequency: 433.42 Mhz;

RF Signal Range : 80 ft;

Maximum RF signal power: 10mW Operating temperature: -10C to +70C Humidity: +5% to 95% non-condensing;

3. Sensitivity Each time the batteries are inserted into the product, you can select the key sensitivity. When the batteries are inserted the 6 keys will light up sequentially, the keys will stay lit for 1 second. When the batteries are inserted the device will allow you to adjust the sensitivity by clicking in one of the 6 pads. The first pad will set the highest sensitivity while the last sets the lowest sensitivity. The product will blink the selected key confirming the selec-

tion, if no key is touched it will keep the last configuration saved. This can be changed by repeating the process. This device complies with Part 15 of the FCC rules and Industry Canada licenseexempt RSS standard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcause harmful interference, and (2) this device must accept any interference received, including interferencethatmaycauseundesiredoperation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modificationsorchangetothisequipment.Suchmodificationsorchangecouldvoidtheusers authoritytooperatetheequipment. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection againstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcan radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions, maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethat interference will not occur in a particular installation. If this equipment does cause harmful interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

NEOCONTROL US LLC FCC ID: 2ALP4-NMIO1WTV2 POWER OF ATTORNEY Date: Dec. 18, 2019 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Services (ShenZhen) Co., Ltd.

(Philo Zhong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Services (ShenZhen) Co., Ltd. (Philo Zhong) on our behalf shall have the same effect as acts of our own. This authorization expires on Dec. 17, 2020. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, NEOCONTROL US LLC are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. /\

Sincerely, NEOCONTROL US LLC fi nature od s ANDRE COMITRE NETO / COO Typed name and Title

NEOCONTROL US LLC Date: Dec. 18, 2019 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ALP4-NMI01WTV2 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type File Name Schematics Schematics. pdf Block Diagram Block Diagram.pdf Operational Description Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, NEOCONTROL US LLC

A j ANDRE COMITRE NETO / COO Typed name and Title ature

NEOCONTROL US LLC Date: 12/18/2019 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD To Whom It May Concern:

We, NEOCONTROL US LLC, state that our device, FCC ID: 2ALP4-NMIO1WTV2, has a non-removable rear cover. The label will be placed on the rear cover. And the label will be visible to the end users when they purchase the product. The back cover can not be moved away, so the FCC ID label has to be placed on the surface of product. Sinc tely, i i

{f isha ture

[ANDRE COMITRE NETO (Name)]

[COO (Title)]

[NEOCONTROL US LLC (Company name)]