[e a www.santalaiot.com wi CE XCFE J Specifications Model: S-01 Interface: USB port Input: DC 5V, 2A 10W Operating temperature: 5C ~ 45C LED light color: 16 million colors ( Support the color change function) Dimmable: Yes LED quantity: 60 x light emitting diodes Luminous flux: 480Lm ( Max.) Strip length: 78.74 inch / 2000mm Waterproof and dustproof rating: IP65 (LED light strip part only ) Wi-Fi: 802.1 1b/g/n, 2.4GHz ONLY General indoor use only Turn off power before inspection, installation and removal For indoor use only Keep children away from the LED light strip Maintain with a dry cloth duster Avoid dropping DO NOT touch when it working DO NOT disassemble DO NOT clean with liquid DO NOT use abrasives or solvents DO NOT use in wet or damp areas ( e.g. bathrooms ) DO NOT use in enclosed environments DO NOT exceed the recommended electrical ratings Enabling Alexa
. Please download SANTALA app from App store
( Play store for Android device or App store for iOS device). Create an account in SANTALA app ( user name and password are case sensitive ) and login to your account. Launch SANTALA app and follow the on-screen directions to complete network setup. Go to Santala App > long press the device icon to enter the detail page. Enable a cloud service ( iOS app only ). Launch the Alexa App.Tap Menu > Skill > search Santala and tap Enable . Login an account and passward same as Santala app. Choose DISCOVER DEVICES and match until success. 8. Now you can control the Smart Light Strip by asking Alexa. For example, Alexa, turn on the light. e SANTALA Smart Light Strip ms:o1 Tl Works with Apple HomekKit Instruction Manual Product Overview Model: -01 SANTALA Smart Light Strip Input: 5V= 2A(MAX.) Rated Power: 10W FOC ID: 2AOW9S.01 Made in ey Sticker 7 |
USB HomekKit Setup Connector code label I What's Included:
- S-01 Smart Light Strip
- Adaptor ( Connect to USB )
- Instruction Manual
- Quick Start Guide
- Sticker x 2 ( Fixed a control box ) I Product Requirements:
- Free Santala app ( available on the App store)
- To control this HomeKit-enabled accessory, iOS latest version is recommended.
- Controlling this HomekKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 11.0 or later or an iPad with iOS 11.0 or later set up as a home hub. Enabling Homekit Connect the USB connector to an adaptor. The Smart light strip will light up to red color (10% bright ).It is ready for network setup. J Setup Homekit:
1. Make sure your iPhone or iPad (iOS latest version) is connected to a 2.4GHz Wi-Fi network.
(This product does not support 5GHz Wi-Fi Networks.)
. Make sure you have at least 3 bars of Wi-Fi signal there. Download the free SANTALA app from the App store and log in. Tap + and scan the QR code. Then follow the steps to add the device to the Home and Room. Please keep the QR code for future use. Name this product to help you identify it in the Home app and to control it with Siri. For example, you can name the product Master Light, then launch Siri and speak Turn on the Master Light. Adjust the brightness by tapping and holding the light strip icon in the app for 2 seconds,then follow APP instruction to adjust the brightness. Or just asking Siri e.g., Set Master light to 50%. Create a scene which controls multiple accessories at the same time. Tap the scene to turn it on or off, or just ask Siri. For example, if you assign the Good Morning command to the scene of turning off room light and turning on the living room light, when you speak Good night to Siri, everything is done. Enabling Google Home 1. Please download SANTALA app from App store
( Play store for Android device or App store for iOS device). Create an account in SANTALA app ( user name and password are case sensitive ) and login to your account. Launch SANTALA app and follow the on-screen directions to complete network setup. Go to Santala App > long press the device icon to enter the detail page. Enable a cloud service ( iOS app only ). Launch the Google Home App.Tap Menu > Home control. Tap + to select SANTALA device. Login an account and passward same as Santala app. After logging in successfully, it will display all the device in your Santala account. Tap Done on the upper right. 10.Now you can control the Smart Light Strip by asking Google Home.For example, Hey Google, turn on the light. 1. The use of a Homekit - enabled accessory need the following permissions:
Setting > iCloud > iCloud Drive > Turn On Setting > iCloud > Keychain > Turn On Setting > Privacy > HomekKit > Santala > Turn On 2. Controlling this HomekKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 11.0 or later or an iPad with iOS 11.0 or later set up as a home hub. Restore Factory Settings Connect the USB connector to an adaptor.Press and hold the switch button for 5 seconds and the LED light strip will be off. At this time, release the button and the LED light strip will turn to red color (10% bright) . It indicates that you have restored the device to factory settings. SANTALA FAQ I Why did | fail to add my Smart light strip to the SANTALA app?
1.Make sure your accessory is powered on and nearby. 2. If you use a dual 2.4/5G network router, please turn off the 5G network. Connect your phone with 2.4G network and add the device again. 3.Make sure that the router setting meets the relevant requirements. The device only support the mode of WPA/WPA2-PSK. 4.Make sure the Smart light strip is in pairing mode. If not, please reset light strip to restore factory setting. 5.Select the accessory shown on screen, then scan the QR code which can be found on device, instruction manual or inner packaging. 6.If the app prompts No Discovered Accessories .before you scanning the QR code:
1) Close the app. 2) Turn off mobile phone Wi-Fi. 3) Reboot the mobile phone. 4) Turn on mobile phone and turn on mobile phone Wi-Fi. 3) Restore Smart light strip to factory settings 4) Add the device again FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-
Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation Customers Name Mr. / Miss / Mrs. Telephone :
Product Model : Retailer's Name & Stamp:
Date of Purchase :
Thanks to buy SANTALA product, please complete and return this warranty card.From the date of purchase, you can get a year warranty. This warranty card only applies to formal channel of SANTALA product. Shenzhen meihua wisdom technology co.,ltd Address :805/F,block C,South of Minneapolis, buji jingnan south road,shezhen longgang district, guangdong province, China Tel : 0755-88824061 Email : 3031200359@qq.com Website : www.santalaiot.com Clean the installation surface before install Smart light strip. Do not stick on uneven surfaces, rough surface or peeled off wall. Stick to the installation surface.Do not stick to angle over 90 degree or do not blend LED area on angle.
/ oY a? xT Stick two stickers on back of control box and stick on installation surface. Smart Light Strip can be cut to desired size at the scissor markings. Pay attention:
Cut off a power before cut Connect the USB connector to an adaptor before setup. FAQ I The device works normally after restoring factory settings or switching on/off, but it occasionally gets disconnected from the network and can not be recognized. 1.Make sure the number of Wi-Fi connected devices is within the wireless network capacity of your router. Otherwise, please replace with another router. 2.Reconnect you iOS device to Wi-Fi and make sure your Wi-Fi signal is strong enough. 3.Wait until the network is fixed. If your router performs poorly in wireless networks that might result from network congestion. 4.Check the router setting and see if there is any limit to the number of simultaneous client connections. 5.Restart your HomeKit accessory or restore your HomeKit accessory to factory setting, and add your HomekKit accessory to the SANTALA app. 6.Updated firmware to the latest version. Use of the Works with Apple Homekit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. SANTALA Quality Certificate
[Productname;
Smart Light Strip I Product model:
S-01 JJ Date of manufacture:
IJ Checker: