FCC ID: WA7-9377 Wireless LAN and Bluetooth module

July 23, 2019 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 7/19/19 Subject: Operational description confidentiality Company name: NetAlly FCC ID: WA7-9377 To whom it may concern, The user manual located in the Operational Description exhibit is long term confidential. FCC KDB 996369 D03 OEM Manual v01 allows for the user manual to held confidential if the module is not sold to 3rd parties. The module WA7-9377 will not be sold to 3rd parties. Name:

Brad Harper Date: 7/19/19 Title: Engineering Manager Signature:

NetAlly 2075 Research Pkwy Colorado Springs, CO 80920 Suite A 719-272-8775 brad.harper@netscout.com

Agent Authorization Company: NetAlly Address: 2075 Research Parkway, Colorado Springs, Colorado 80920 Product Name: Wireless LAN and Bluetooth module Model Number(s): BLUE bean Product Description: IEEE 802.11b/g/n/a/ac Wave2 dual-band wireless LAN and Bluetooth 5.0 USB module We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 6/17/19 Name:

Brad Harper Title:

Engineering Manager Company: NetAlly

July 23, 2019 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: WA7-9377 To Whom It May Concern, Date: 7/18/19 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

NetAlly 2075 Research Pkwy Colorado Springs, CO 80920 Suite A 719-272-8775 brad.harper@netscout.com External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Brad Harper Title: Engineering Manager NetAlly 2075 Research Pkwy Colorado Springs, CO 80920 Suite A 719-272-8775 brad.harper@netscout.com

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 6/11/19 Subject; Modular Transmitter Application Company name: NetAlly FCC ID: WA7-9377 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;-

FCC KDB 996369 D01 Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 Module Equip Auth Guide v02. FCC ID WA7-9377 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee

(do not write yes/no, but explain why product The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. complies/how it is achieved) Module is shielded Module has buffered data inputs NetAlly 2075 Research Pkwy Colorado Springs, CO 80920 Suite A 719-272-8775 brad.harper@netscout.com The module must contain power supply regulation on the module. Power supply is regulated The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The module must demonstrate compliance in a stand-alone configuration. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). Module has a permanent antenna Please reference exhibition Test configuration Photo for stand-alone test configuration The instruction on the labeling rule of the end-

product is found in the label sample exhibit. The required FCC rule has been The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. fulfilled and all the instructions for maintaining compliance has been clearly stated in the The module must comply with RF exposure requirements for RF Exposure for the compliance of MPE RF exposure rule. Operational manual. Please refer to the added SAR testing reports Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements;

NetAlly 2075 Research Pkwy Colorado Springs, CO 80920 Suite A 719-272-8775 brad.harper@netscout.com This module will not be sold to a third party and is only included in our products. Therefore, there will be no modular installation instructions or other integration instructions provided. KDB Requirements of KDB 996369 D03 User Manual Page Number Ref Sect reference NA NA NA NA NA NA NA NA NA 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 List of applicable FCC rules Summarize the specific operational use conditions Limited module procedures Trace antenna designs RF exposure considerations Antennas Label and compliance information Information on test modes and additional testing requirements 2.10 Additional testing, Part 15 Subpart B disclaimer Name: Brad Harper Date: 7/24/19 Title:

Engineering Manager Signature of applicant NetAlly 2075 Research Pkwy Colorado Springs, CO 80920 Suite A 719-272-8775 brad.harper@netscout.com

July 23, 2019 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Ref: FCC Class II Permissive change for FCC ID: WA7-9377 for clients without radar detection Applicant: NetAlly Dear Examiner, This is to request a Class II Permissive change for FCC ID: WA7-9377 originally granted on 6/17/19. The change under this application is to add SAR exposure test reports and add DFS channel test reports. I attest that the certified device will not be capable of ad-hoc mode operation outside of the grant conditions. Further I attest that the certified device is client only without radar detection. Sincerely, Name:

Brad Harper Date: 6/17/19 Title:

Engineering Manager Signature of applicant NetAlly 2075 Research Pkwy Colorado Springs, CO 80920 Suite A 719-272-8775 brad.harper@netscout.com

FCC Software Configuration Control Declaration Date: July 24, 2019 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: WA7-9377 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Brad Harper Title: Engineering Manager Date:7/24/19 Signature of applicant NetAlly 2075 Research Pkwy Colorado Springs, CO 80920 Suite A 719-272-8775 brad.harper@netscout.com

PHOTOS - TEST SETUP Company: NetAlly Product Name: BLUE Bean (1x1 module) Report No.: NTCT89 Test Setup Photos 1. Test Setup Photographs 1.1.1. Test Setup - CE - AC Conducted Emissions NTCT89 PoE AC Mains Conducted NTCT89 PoE AC Mains Conducted Side NTCT89 PS AC Mains Conducted 1.1.2. Test Setup - DFS - Conducted - DFS - Conducted DFS Test Setup 1.1.3. Test Setup - RE#1 - Radiated Emissions - 3m Chamber AC-DC PS Digital Emissions 30-1000MHz PoE Digital Emissions 30-1000MHz TX Spurious 1-18GHz