| all | frequencies |
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|
| manual | photos | label | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Users Manual | Users Manual | 1.23 MiB | July 16 2004 | |||
| 1 |
|
Internal Photos | Internal Photos | 458.99 KiB | July 16 2004 | |||
| 1 |
|
External Photos | External Photos | 273.07 KiB | July 16 2004 | |||
| 1 |
|
Label Location and Sample | ID Label/Location Info | 81.32 KiB | July 16 2004 | |||
| 1 | Block Diagram | Block Diagram | July 16 2004 | confidential | ||||
| 1 |
|
Confidentiality | Cover Letter(s) | 212.03 KiB | July 16 2004 | |||
| 1 |
|
Cover Letter | Cover Letter(s) | 29.87 KiB | July 16 2004 | |||
| 1 |
|
Description | Operational Description | 14.81 KiB | July 16 2004 | |||
| 1 |
|
Power of Attorney Letter | Cover Letter(s) | 234.28 KiB | July 16 2004 | |||
| 1 |
|
RF Exposure Info | RF Exposure Info | 7.08 KiB | July 16 2004 | |||
| 1 | Schematics | Schematics | July 16 2004 | confidential | ||||
| 1 |
|
Test Report Part 1 | Test Report | 2.12 MiB | July 16 2004 | |||
| 1 |
|
Test Report Part 2 | Test Report | 3.31 MiB | July 16 2004 | |||
| 1 |
|
Test Report Part 3 | Test Report | 2.59 MiB | July 16 2004 | |||
| 1 |
|
Test Setup Photos | Test Setup Photos | 134.31 KiB | July 16 2004 |
| 1 | Users Manual | Users Manual | 1.23 MiB | July 16 2004 |
Table of Contents 1: Preparing to Install the WGE111 Bridge . 1 Introduction . 1 Package Contents . 1 System Requirements . 2 Placement and Range Guidelines . 2 Operating Modes . 2 WGE111 Default Wireless Configuration Settings . 3 2: Installing the WGE111 Bridge . 4 Connecting the Bridge to a Single Device . 4 Connecting the Bridge to Multiple Devices . 5 3: Preparing to Configure the WGE111 Bridge . 7 Identifying Your Wireless Network Settings . 7 Connecting the Bridge to a Computer . 8 Checking and Changing the Computers IP Address . 8 Changing the Bridges IP Address . 10 Using the NetBIOS Name . 11 4: Configuring the WGE111 Bridge for Your Wireless Network . 12 Changing the Country/Region Setting . 12 Selecting a Specific Wireless Network . 13 Changing the Bridges Password . 13 Enabling WEP Security . 14 Upgrading the Bridge . 15 Configuring the Bridge for Ad Hoc Mode . 16 Setting the Bridges Data Rate . 17 WGE111 Bridge Status Lights and Settings . 18 WGE111 Bridge Status Lights . 18 Restoring the Bridge to the Default Settings . 18 WGE111 Bridge Status Information . 19 Troubleshooting Tips . 20 WGE111 Bridge System Requirements and Specifications . 22 Regulatory Approvals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Channel The Wireless Channel sets the radio frequency used for communication. Access Points use a fixed Channel. You can select the Channel used. This allows you to choose a Channel which provides the least interference and best performance. In the USA and Canada, 11 channel are available. If using multiple Access Points, it is better if adjacent Access Points use different Channels to reduce interference. In "Infrastructure" mode, Wireless Stations normally scan all Channels, looking for an Access Point. If more than one Access Point can be used, the one with the strongest signal is used. (This can only happen within an ESS.) If using "Ad-hoc" mode (no Access Point), all Wireless stations should be set to use the same Channel. However, most Wireless stations will still scan all Channels to see if there is an existing "Ad-hoc" group they can join. 11 Preparing to Install the WGE111 Bridge Introduction Thank you for purchasing a NETGEAR WGE111 54 Mbps Wireless Ethernet Bridge. With this bridge you can connect one or more gaming consoles, personal computers, printers, or other Ethernet-enabled devices to communicate with your network. Note: If you have a wired network, you must have a wireless router or access point set up in the network. To connect more than one device to the bridge you must use switch or a hub. This guide shows you how to connect the bridge and configure it for your network whether to work with a wireless router or access point, or to work with other wireless devices. Setup is easy follow the instructions in this guide and your network will be up and running quickly. Package Contents Power adapter Resource CD for 54 Mbps Wireless Ethernet Bridge, Installation guide, Support information card, Warranty card 100 Mbps Ethernet cable WGE111 54 Mbps Wireless Ethernet Bridge The product package should contain the following items:
WGE111 54 Mbps Wireless Ethernet Bridge WGE111 54 Mbps Wireless Ethernet Bridge Resource CD, that includes this Reference Power adapter Ethernet cable Manual for the Model WGE111 54 Mbps Wireless Ethernet Bridge in Adobe Acrobat PDF file format Installation guide Warranty card Support information card 1 System Requirements Before installing the WGE111 54 Mbps Wireless Ethernet Bridge, please make sure that these minimum requirements have been met:
For connecting into a wired network, you must have the network set up and working with an access point or wireless router. For creating an Ad-Hoc network without an access point, all devices must have a receiver/transmitter. (The receiver/transmitter may be another WGE111 bridge.) Large metal surfaces 2.4 GHz cordless phones If the default settings on the bridge do not work, you will need to configure the bridge. Also, if you have more than one WGE111 in the network, only one can use the default IP address. Youll have to configure the others with unique IP addresses. To configure the bridge with the configuration software, you must have a personal computer with Internet browser software installed, such as Microsoft Internet Explorer 5.0 (or later) or Netscape 6.0 (or later). Placement and Range Guidelines Computers and other Ethernet-enabled devices can connect over wireless networks indoors at more than 500 feet. However, the operating distance or range of your wireless connection can vary significantly based on the physical location of the WGE111 54 Mbps Wireless Ethernet Bridge. For best results, avoid potential sources of interference, such as:
Microwaves In general, wireless devices can communicate through walls. However, if the walls are constructed with concrete or have metal (or metal mesh), the effective range will decrease if such materials are between the wireless devices. Operating Modes The WGE111 Wireless Ethernet Bridge operates in either Infrastructure or Ad-Hoc mode. Infrastructure mode is used when you have an access point or wireless router connected to a wired network. The wireless devices and computers communicate with the wired network (and other wireless devices) through the wireless router or access point. For example, with a wireless router multiple computers (both wired and wireless) can share a single cable or DSL broadband Internet connection. You use the bridge in Ad-Hoc mode if you have a small, wireless-only network and all the devices have wireless transmitters/receivers. In this case, theres no need for an access point or a wireless router for the wireless devices communicate directly to one another. 2 WGE111 Default Wireless Configuration Settings Note: If you are setting up a new wireless network, please set up the network and make sure it works before adding the WGE111 Wireless Ethernet Bridge into the network. You will need to identify the wireless configuration and security parameters already defined in your wireless network. Note: All NETGEAR, Inc. 802.11g and 802.11b wireless access products use similar factory settings as the WGE111 and will work without any configuration changes. The factory default settings for your WGE111 54 Mbps Wireless Ethernet Bridge are:
Mode (Infrastructure or Ad-Hoc): Infrastructure Wireless network name Service Set Identification (SSID): Any Note: Any means the bridge will connect to the access point or wireless router that has the strongest signal. This may not be the closest access point or wireless router. For the WGE111 Wireless Ethernet Bridge to communicate with a specific wireless router or access point, both devices must be configured with the same SSID. Password: password Authentication type: Auto User ID: admin WEP security: Disabled Country/Region: United States Warning: Having the bridge set to the wrong country or region may result in the violation of local laws. IP address: 192.168.0.202 Protocol: Static WGE111-specific default settings:
Device name: netgearxxxx (where xxxx is the last 4 digits of the MAC address) Data rate: b/g combo 3 22 Internet Installing the WGE111 Bridge Cable/DSL modem N E T G E A R 3 WGR814 54 Mbps Cable/DSL Wireless Router Desktop PC with Ethernet connection Macintosh computer with WGE111 54 Mbps Wireless Ethernet Bridge family family room room Gaming console with WGE111 54 Mbps Wireless Ethernet Bridge This section provides instructions for connecting the WGE111 54 Mbps Wireless Ethernet Bridge, using the default settings, to either a single Ethernet-enabled device or to multiple devices through a switch or hub. Note: If you find that the default settings dont work, if you know that youve configured your wireless network with WEP security, if youre placing more than one WGE111 bridge on the network, or if you are not in the United States, youll have to configure the bridge before connecting it to the Ethernet-enabled device(s). To configure the bridge, see Configuring the WGE111 Bridge for Your Wireless Network on page 12. Connecting the Bridge to a Single Device 1. Unpack the box and verify the contents. 2. Identify a flat surface where you will put the wireless game adapter. For best results, follow these guidelines:
Place it away from potential sources of interference, such as computers, monitors, TVs, microwaves, cordless phones, or large metal surfaces. Warning: Failure to follow these guidelines can cause intermittent or complete failure of wireless connectivity. Place it in an elevated location such as a high shelf or on a wall in the center of your wireless access area. If you mount the bridge on a wall, do not place the bridge in such a way that it is vertical with the NETGEAR name upside-down and the power adapter plug hanging from the bottom of the unit. Having the unit in this position violates power adapter regulations. 3. Lift the bridges antenna so it is vertical. 4 WGE111 54 Mbps Wireless Ethernet Bridge Gaming console or other Ethernet-enabled device 4. Turn off the gaming console or other Ethernet-enabled device. 5. Connect the provided Ethernet cable between the WGE111 Wireless Game Adapter and the gaming console or other Ethernet-enabled device. 6. Connect the power adapter to the bridge and plug the power adapter in to a power outlet. The Power and Wireless LAN lights should light up. 7. After you see the Wireless LAN light light up, turn on the gaming console or other Ethernet-enabled device. If the bridge and the Ethernet-enabled device are successfully connected, the Network light will light up. This light flashes when there is network activity. Note: If your setup works with the default settings, you dont need to configure the bridge unless you need to change the Country/Region setting from the default setting (United States) or you need to assign a unique IP address to subsequent WGE111 bridges. See page 12 for information on configuring the bridge. Connecting the Bridge to Multiple Devices 1. Unpack the box and verify the contents. 2. Identify a flat surface where you will put the wireless game adapter. For best results, follow these guidelines:
Place it away from potential sources of interference, such as computers, monitors, TVs, microwaves, cordless phones, or large metal surfaces. Warning: Failure to follow these guidelines can cause intermittent or complete failure of wireless connectivity. Place it in an elevated location such as a high shelf or on a wall in the center of your wireless access area. If you mount the bridge on a wall, do not place the bridge in such a way that it is vertical with the NETGEAR name upside-down and the power adapter plug hanging from the bottom of the unit. Having the unit in this position violates power adapter regulations. 3. Lift the bridges antenna so it is vertical. 4. Turn off the gaming consoles or other Ethernet-enabled devices. 5 WGR614 54 Mpbs Wireless Router Cable or DSL modem WGE111 54 Mbps Wireless Ethernet Bridge Fast Ethernet Switch FS605 Gaming console or other Ethernet-enabled device Ethernet-enabled computer 5. Connect the provided Ethernet cable between the WGE111 Wireless Game Adapter and the switch (or hub). 6. Connect each gaming console or other Ethernet-enabled device to the switch (or hub) using an Ethernet cable. 7. Connect the switchs (or hubs) power adapter and plug that power adapter in to a power outlet. 8. Connect the bridges power adapter and plug the power adapter in to a power outlet. The Power and Wireless LAN lights should light up. 9. After the Wireless LAN light lights up, turn on any gaming console(s). 10. After turning on any gaming consoles, turn on any other Ethernet-enabled device(s). If the bridge, switch, and the Ethernet-enabled devices are successfully connected, the Network light will light up. This light flashes when there is network activity. Note: If your setup works with the default settings, you dont need to configure the bridge unless you need to change the Country/Region setting from the default setting (United States) or you need to assign a unique IP address to subsequent WGE111 bridges. See page 12 for information on configuring the bridge. 6 33 Preparing To Configure the WGE111 Bridge If the default settings dont work in your wireless network, if you are in a country or region other than the United States, or if you have multiple WGE111 bridges on the network, you need to configure the bridge. Identifying Your Wireless Network Settings You may want to print this page separately, fill in the configuration parameters, and put it in a safe place for possible future reference. For an existing wireless network, the person who set up the network will be able to provide this information. Note: For wireless devices and the bridge to communicate with each other, each must be configured with the same SSID, WEP security settings, and the same IP subset address. Wireless Network Name (SSID): The Service Set Identification (SSID) identifies the wireless local area network. Any is the default WGE111 SSID. If you have named your wireless network with a different SSID, write your networks SSID on the line below. Wireless network name (SSID): ______________________________ Bridge IP Address: Your Ethernet network has an IP subset address given as a set of three numbers plus a last set of unique numbers (xxx.xxx.xxx.yyy) to identify each device on the network. The default IP address for the bridge is 192.168.0.201. To communicate to your Ethernet network, each bridge must have a unique address consistent with your networks IP subset address. If you need to change the bridges IP address, write down the new address. Bridges IP address: ______________________________ WEP Security Encryption key: The default WEP encryption mode of the bridge is disabled. If you have set up WEP security on your wireless network (through the router or access point), youll need to configure the bridge using the same WEP security parameters. WEP Encryption Key Length, circle one: 40/64 or 128 bits WEP Encryption Passphrase, if used: ___________________ A passphrase is used to automatically generate the WEP hexadecimal numbers for the key. Otherwise, you will have to manually enter up to four hexadecimal numbers. WEP Hexadecimal Numbers: ______________________________ ______________________________ ______________________________ ______________________________ 7 Connecting the Bridge to a Computer You use browser-based configuration software to configure the bridge. To access the software, the bridge must be directly connected or connected through a switch (or hub) to a computer. The computer must have an Internet browser installed. For example, if the bridge is connected to a game box, youll have to connect the bridge to a computer to be able to configure the bridge. To connect the bridge to a computer:
1. If your network has a wireless router or access point, make sure it is powered up. 2. Power down the Ethernet-enabled computer. 3. Connect the provided Ethernet cable between the computer and the bridge. 4. Power up the bridge. 5. Power on the computer. Checking and Changing the Computers IP Address If your wireless network has an IP address other than 192.168.0.yyy, you need to change the IP address on the computer before you can access the browser-based configuration software. WGE111 54 Mpbs Wireless Ethernet Bridge Note: All NETGEAR products use 192.168.0.yyy. If you have NETGEAR wireless products working in your wireless network without configuration changes, you wont need to check or change IP addresses. Windows 98/Me 1. Choose Settings>Control Panel from the Start menu. 2. Double-click the Network icon. 3. Click the Configuration tab. In the list of installed network 4. components, select the TCP/IP entry for the computers Ethernet adapter or NIC. 5. Click Properties. 6. Click the IP Address tab. 7. If Obtain an IP address automatically is selected, select Specify an IP Address. OR If Specify an IP Address is already selected, note the current IP address. 8. Change the IP address to 192.168.0.230. 8 9. Click OK twice to close the Network control panel and save any changes. 10. If you made a change, restart the computer. Note: After youve changed the settings on the bridge, youll have to reset the TCP/IP Properties: IP Address tab values back to their original state. Windows 2000/XP 1. Right-click My Network Place and choose Properties. 2. Double-click Local Area Network Connection and 3. 4. click Properties. Select Internet Protocol (TCP/IP) and click Properties. If Obtain an IP address automatically is selected, select Use the following IP Address. OR If Use the following IP Address is selected, note the current IP address. 5. Change the IP address to 192.168.0.230. 6. Click OK twice and click Close to save any changes. If you made a change, restart the computer. 7. Note: After youve changed the settings on the bridge, youll have to reset the Internet Protocol
(TCP/IP) Properties dialog box back to its original state. 2. 3. Mac OS 8.6 or 9.x 1. Choose Control Panels >TCP/IP from the Apple () menu. If not already selected, select Ethernet in the Connect via list. If Manually isnt selected in the Configure list, note the current selection and select Manually. OR If Manually is selected, note the current IP address. 4. Change the IP address to 192.168.0.230 and click the close box. If asked, click Save. 5. 9 Note: After youve changed the settings on the bridge, youll have to reset the TCP/IP dialog box back to its original state. Mac OS X 1. Choose System Preferences from the Apple
() menu. 2. Double-click Network. 3. 4. If not already selected, select Built-in Ethernet in the Configure list. If Manually isnt selected in the Configure list, note the current selection and select Manually. OR If Manually is selected, note the current IP address. 5. Change the IP address to 192.168.0.230 and click Apply Now. Note: After youve changed the settings on the bridge, youll have to reset the Network: TCP/IP dialog box back to its original state. Linux and UNIX If youre configuring the bridge with a Linux-based or UNIX-based computer see your system documentation for TCP/IP and networking setup information. Start your browser software. Changing the Bridges IP Address 1. 2. Type http://192.168.0.201 as the web address and press Enter (or Return). 3. Type admin as the User ID and type password as the Password. 4. Click OK. Youll see the Status page. 5. To change the IP address for the bridge to match your wireless network, click IP Settings. Select Use this IP address and type a unique IP address for the bridge. The first three sets 6. of numbers (xxx.xxx.xxx.yyy) should be the same as your access point or router. The last set of numbers (.yyy) should be a set of unique numbers on your network. OR If your network has a router with a router table, change the Protocol to DHCP.
(By doing this, the bridges IP address is assigned dynamically by the router and youll use the router table to find out what the bridges current IP address is.) 10 8. Click Apply. 9. Click Logout. 10. Restore the computer to its previous network settings. See Checking and Changing the Computers IP Address on page 8 for details. 11. Make any other configuration changes. 12. If you want this bridge used elsewhere on your network, install it now. Note: If you have multiple WGE111 bridges in your network and want to use the default IP address of 192.168.0.201, only one bridge can use this default IP address. Youll have to create IP addresses for each bridge using 192.168.0.yyy, where yyy is a unique number for each device. Using the NetBIOS Name If youre familiar with using a devices NetBIOS name, you may use it in the Internet browser instead of the IP address to access the configuration software. The WGE111 NetBIOS name is netgearxxxx, where xxxx stands for the last four digits of the WGE111 MAC address, which is found on the bridges label. 11 44 Configuring the WGE111 Bridge for Your Wireless Network You use browser-based configuration software to configure the bridge. To do so, you must have the bridge connected to a computer (either directly or through a switch or hub) that has an Internet browser installed. See Installing the WGE111 Bridge on page 4 or Connecting the Bridge to a Computer on page 8. Once you are logged into the configuration software, you can view the status of your wireless network and the bridges current configuration, change the password, enable WEP security (if you have it set up on your wireless network), select a specific network for the wireless connection, or make other configuration changes. Changing the Country/Region Setting If you are not in the United States, you must first change the Country/Region selection. 1. 2. Type http:// followed by the bridges IP address as the web address and press Enter (or Start your browser software. Return). Note: The default value is 192.168.0.201. If youve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type password as the Password. 4. Click OK. Youll see the Status page. 5. Click Wireless Settings. 6. Select the correct country or region from the Country/Region list. Click Yes to accept the new country or region. Warning: Having the bridge set to the wrong country or region may result in the violation of local laws. 7. Click Apply. 8. Click OK. 9. If you are through making changes, click Logout. 12 10. To use the bridge with a different computer or other Ethernet-enabled device, return to Installing the WGE111 Bridge on page 4 to connect the bridge. Selecting a Specific Wireless Network On the Wireless Settings page, you can select a specific wireless network (SSID) and make other configuration changes. 1. 2. Type http:// followed by the bridges IP address as the web address and press Enter (or Start your browser software. Return). Note: The default value is 192.168.0.201. If youve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type the current password.
(password is the default password.) 4. Click OK. Youll see the Status page. 5. Click Wireless Settings. 6. To connect to a specific wireless router or access point, select the correct one from the SSID (Existing networks) list. 7. Click Apply. 8. Click OK. 9. Click Logout. Note: You may also select the SSID on the Wireless Network Available page instead of the Wireless Settings page. Changing the Bridges Password 1. 2. Type http:// followed by the bridges IP address as the web address and press Enter (or Start your browser software. Return). Note: The default value is 192.168.0.201. If youve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type the current password. (password is the default password.) 13 4. Click OK. Youll see the Status page. 5. Click Change Password. 6. Type the old password in the Old Password box. 7. Type a new password in the New Password box. 8. Re-type the new password in the Confirm Password box. 9. Click Apply. 10. If you are through making changes, click Logout. Enabling WEP Security To prevent others from accessing your wireless network, you may enable WEP (Wired Equivalent Privacy) security on your wireless network. If you do so, youll need to enable WEP security in all the devices. If you filled in the parameters on page 7, you may want to refer to that page before making any configuration change. Note: By default, WEP security is disabled. Start your browser software. 1. 2. Type http:// followed by the IP address for the bridge as the web address and press Enter
(or Return). Note: The default value is 192.168.0.201. If youve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type the current password.
(password is the default.) 4. Click OK. Youll see the Status page. 5. To change the WEP settings, click Wireless Settings. Select Web Data Encryption to enable WEP security. 6. 14 7. 8. 9. Select Open System or Shared as the Authentication Type. Select 64 bits or 128 bits as the Key Length. If the key is determined through software, type the phrase in the Passphrase box and click Generate. OR If you entered a key manually for your wireless router or access point, select a Key and type the hexadecimal values that are used with the wireless router or access point. 10. Click Apply. 11. If you are through making changes, click Logout. Upgrading the Bridge If theres a firmware upgrade, download the software from www.NETGEAR.com to your computer and then use the browser-based configuration software to upgrade the bridge. 1. 2. Type http:// followed by the IP address for the bridge as the web address and press Enter Start your browser software.
(or Return). Note: The default value is 192.168.0.201. If youve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type the current password.
(password is the default.) 4. Click OK. Youll see the Status page. 5. To upgrade the bridge, click Upgrade Firmware. 6. Click Browse and locate the downloaded software. 7. Click Upload. 8. If you are through making changes, click Logout. 15 Configuring the Bridge for Ad-Hoc Mode You may use this bridge in a wireless-only network where the wireless devices are all set to Ad-
Hoc mode. By default, the bridge is set to Infrastructure mode; therefore, youll need to change the Network Type on the Wireless Settings page. Start your browser software. Note: In an Ad-Hoc network, all devices must have the same SSID, WEP settings, and IP network subset address with a unique identifying number (xxx.xxx.xxx.yyy). 1. 2. Type http:// followed by the IP address for the bridge as the web address and press Enter (or Return). Note: The default value is 192.168.0.201. If youve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type the current password.
(password is the default.) 4. Click OK. Youll see the Status page. 5. Click Wireless Settings. 6. If you are setting up the Ad-Hoc network, type a SSID for the network in the SSID
(Service Set Identifier) box. OR If the Ad-Hoc network already exists, select the correct SSID in the SSID (Existing network) list. Note: You may also select the SSID on the Wireless Network Available page. Select Ad-Hoc as the Network Type. Select the correct channel/frequency for the Ad-Hoc network. 7. 8. 9. Click Apply. 10. If you are through making changes, click Logout. 16 Setting the Bridges Data Rate The wireless Ethernet standard, 802.11, supports several data rates the most common are the 802.11b and the 802.11g standards. The 802.11b standard is slower with a maximum data rate of 11 Mbps. The 802.11g standard supports data rates up to 54 Mbps. By default the WGE111 bridge is set to connect at either standard, but it tries first using the 802.11g standard. If you want to force the bridge to connect using a specific standard, you can set the Data Rate on the Wireless Settings page. Note: The actual data rates achieved can be much lower than the maximum depending on the devices, distances, and any interference. Start your browser software. 1. 2. Type http:// followed by the IP address for the bridge as the web address and press Enter
(or Return). Note: The default value is 192.168.0.201. If youve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type the current password.
(password is the default.) 4. Click OK. Youll see the Status page. 5. Click Wireless Settings. 6. Select either B only (802.11b) or G only (802.11g) as the Data Rate. 7. Click Apply. 8. If you are through making changes, click Logout. 17 WGE111 Bridge Status Lights and Settings Status Lights The WGE111 54 Mbps Wireless Ethernet Bridge has the following three lights, which give you information about the status of your wireless connection:
PWR Green OFF: No power to the unit. ON: Power applied to the unit. WLAN Green OFF: No wireless LAN activity. Flashing: Searching for an access point or wireless router. ON: Connected to a wireless LAN. LAN Green OFF: No Ethernet traffic. Flashing: Wired Ethernet traffic. ON: Connected to the Ethernet. Restoring the Bridge to the Default Settings There are two ways to return the bridge to its default factory settings. Using the Default button:
1. Press the Default button with the point of a pen or pencil for at least 6 seconds until the WLAN light flashes. 2. Then release the button. The LAN light and then the WLAN light should each flash and then come on steadily. Using the browser-based software:
To use this procedure the bridge must be connected to a computer either directly or through a switch or hub that has an Internet browser installed. 1. Open and log into the browser-based configuration software. 2. Click Restore Factory Default in the navigation bar on the left. 3. Click Restore. 4. When the warning appears, click OK. 5. When the Status page appears, click Logout. 18 Status Information In the browser-based configuration software, you can get certain status information about the bridge and your wireless network. Connection status A signal strength indicator The Status page of the configuration software shows:
Network name SSID NETBIOS name Media access control (MAC) address Firmware version Current country or region setting Channel and frequency of the bridge Type of encryption currently active Transmitted and received data amounts The bridges IP address, subnet mask, default gateway, and the source of the IP address 19 Troubleshooting Tips If you have problems connecting to your wireless network, check these tips. Symptom The WLAN light is flashing and I cant connect to the router or access point. Cause The bridge is too far away from the wireless router or access point. OR The bridge is not configured correctly for the network OR Solution Move the bridge and the wireless router or access point closer together. Check the configuration utility for the router or access point, to see if it lists the WGE111 bridge. My gaming console or remote computer could not connect to the Internet. Use the configuration software for the bridge to verify that the WEP settings, Network Name (SSID), and country/region settings match those of the router or access point. There is a problem connecting to the wireless router. Make sure WLAN light is on solidly. If not, see the previous symptom/solution. Make sure the gaming console or remote computer has a correct IP address with the same IP subset address as the wireless router or access point. Turn the bridge off and then back on. Recheck the IP address for the gaming console or remote computer. Turn off all devices. Then, power on the wireless router (or access point), wait, and then power on the bridge. Check that the bridge connects to the wireless router or access point. If it connects, power on the gaming console or remote computer. 20 Symptom Cause Solution My bridge-enabled computer could not communicate with my wireless-enabled computer or printer. This most likely is a network configuration problem. Check that the wireless-enabled computer or printer is on the same wireless network as the computer using the bridge. Make sure the Network Name
(SSID), WEP key (if WEP is enabled), and country/region selection are the same for all devices connected to the same wireless network. If the computer is connected to the bridge through a switch or hub, try connecting it directly to the bridge. I cant get the configuration utility to show the bridge. or I cant open the configuration software with my browser. I have a gaming console, computer, and the bridge connected through a switch. The computer connects to the Internet but the gaming console cant. This could be a network configuration problem or a hardware connection problem. If the wireless LAN setting are correct, make sure all the devices are on the same IP network. Make sure the Ethernet cable connectors are plugged into the computer and bridge securely. You may need to change the IP address of your computer temporarily to change the bridges IP address. See page 8. Reset to factory defaults. See pg.18. If using a switch or hub with an Ethernet-enabled gaming console, the gaming console must be powered on before the other Ethernet-enabled devices. With power on, disconnect everything from the switch or hub. Re-connect the WGE111, then connect the game console(s). Finally, connect the other device(s). Note: For more troubleshooting information, go to the NETGEAR, Inc. web site. 21 WGE111 System Requirements and Specifications System Requirements for the Bridge To use the bridge in your network you must have:
Wireless router or access point (Infrastructure mode) or a network of wireless devices (Ad-Hoc mode) Network software (Windows, Mac OS, Linux, or UNIX) Internet Explorer 5.0 or later; Netscape 6.0 or later Bridge Specifications Dimensions:
Weight:
LAN:
WLAN:
Power Adapter:
W: 175 mm (6.9") D: 118 mm (4.7") H: 28 mm (1.1") 0.3 kg (0.7 lbs.) 10BASE-T and 100BASE-T 802.11g or 802.11b 5V DC, 2A with localized plug for North America, UK, Europe or Australia Environmental Specifications Operating temperature:
Operating humidity:
Electromagnetic Emissions:
10 to 55 C (14 to 131 F) 85% maximum relative humidity, noncondensing CE/LVD: EN 60950:1992+A1+A2+A3+A4+A11 CE/EMC: EN301489-17 (2002-08) EN301489-1 (2002-08) CE/Radio: EN 300328-1 V1.3.1: 12-2001 EN 300328-2 V1.2.1: 12-2001 FCC Part 15 Subpart C FCC Part 15 Subpart B UL 1950, CUL, TUV licensed (EN 60950) Safety Certifications:
22 Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Certificate of the Manufacturer/Importer It is hereby certified that the Model WGE111 54 Mbps Wireless Ethernet Bridge has been suppressed in accordance with the conditions set out in the BMPT- AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment
(for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions. Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulations. VCCI Statement This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling. Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that NETGEAR WGE111 Wireless Ethernet Bridge may cause undesired operation. Tested to Comply with FCC Standards Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna, (2) Increase the separation between the equipment and receiver, (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, (4) Consult the dealer or an experienced radio/TV technician for help. FOR HOME OR OFFICE USE Federal Communications Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation. Canadian Department of Communications Radio Interference Regulations This digital apparatus (Model WGE111 54 Mbps Wireless Ethernet Bridge) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Technical Support PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT. By registering your product at www.NETGEAR.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR (for US & Canada only), available 24x7. For other countries see your Support Information card. E-mail: support@NETGEAR.com (24x7 online support) www.NETGEAR.com 0560 !
Attention: When you configure the wireless settings of this device please make sure to select the correct country settings. Due to EU-law, the country settings must be identical to the country where the device is operating (important due to non-harmonized frequencies in the EU). 2003 by NETGEAR, Inc. NETGEAR, the Netgear logo, Everybodys Connecting, Auto Uplink and The Gear Guy are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand or product names are trademarks or registered trademarks of their respective owners. Information is subject to change without notice. All rights reserved. July 2003
| 1 | Confidentiality | Cover Letter(s) | 212.03 KiB | July 16 2004 |
EVX! +4-08-20\-808\
LET: +1-408-201-808 vaais22: #200 GLES! YWIGLICS BSIKMSA ess CISis CSILOWWIS a202t NEV vybbjesuy: erOest' juc*
beist rin blognc; Dencjobweus weusder
@luceteA'
sccowbsuAiud GocnwWeUIssOU mil] Lo; pS WIGS PEOLS {US GEIS 0} {WE GLUT Jol {Iz SbbyIcsfou Avs ybbicsur nugetz;suge jy9f bniensuy jo YN|s O'W2Y glecjoente of jpI2 ybbIIestoU sug sil Su blovige nulnepeq peveyye fo ye CoWbesOLe
\e|6g26q (0 ye bnpjic | ye bnpiic qlecjoente oj jpees wsyere Widpr pe PSLLYIN| Jo ye WobyICSsUs AE SPOAG WIFEUI|Z COUISIU fLsqe eeciefe sUq biobYS;SA IWYOWSHOU Uo; cnejoWSUIA 5 ecpewsc pisdisw*
J Block pisdisw'
v2 OMsJU6Q PE|OM:
HGtepA tednezie couLgsUN!s| LesTWEUT Of |UJOLUSHOU secoMbsUIWeL, {UIe ybblICsTIOU bilensu; fo gecrove O'42\ SUq O'eS 0} WE CoWWEZIOU.2 LN|Se" WE YbbIICsLY Coulgeusis1A Hedneey ECC ID: BASMGELI YMIPOUSSHOU SUQ EAS|NSTOU DIAIZIOU ESUsIS| CoWWNUICSIOUe CoWWIeioU nus $8 SOOT Nefdesi uc"
| 1 | Cover Letter | Cover Letter(s) | 29.87 KiB | July 16 2004 |
Exclusive Certification Corp. 4F-2, No. 28, Lane 78, Xing-Ai Rd. Nei-hu, Taipei City 114 Taiwan R.O.C ssq 114_R 4 -2F Tel: 886-2-2792-3366 Fax: 886-2-2792-1100 28 78 To whom it may concern:
The enclosed documents constitute a formal submittal and application for a Grant of Equipment Authorization pursuant to Subpart C of Part 15 of FCC rules (CFR47) regarding 54Mbps Wireless Game Adapter for the Netgear modal WGE111. Data within this report demonstrates that the equipment tested complied with the FCC limits for intentional radiators. Exclusive Certificate Corp. (ECC), as duly authorized agent prepared this submittal. A copy of the letter of our appointment as agent is enclosed. If there are any questions or if further information is needed, please contact ECC for assistance. Claire Wu TEL: +886-2-2792-3366 # 204 FAX: +886-2-2792-1100 E-mail: claire@ecc.com.tw
| 1 | Description | Operational Description | 14.81 KiB | July 16 2004 |
Part NumberG SubjectG WGE111 Operation Principle 1. CPU, U6, 88W8510 have a 32-bit RISC processor integrated, operation frequency is DateG pagesG 3 160MHz. It needs an external 44MHz crystal for reference frequency; this crystal is also used for RF module. This chip is responsible to control RF-Baseband Transceiver
(88W8000G), Flash IC and LED. This chip also has MII interface integrated to communicate with 10/100 Ethernet Switch. 2. FLASH, U13, MX29LV800TTC-70, 8Mbits Flash, bottom sector, 70ns. It is used to store the normal and test firmware. 3. Integrated 2.4GHz ISM Band RF-Baseband Transceiver, U9, 88W8000G which is integrated all RF-Baseband receive and Transmit function. On-Chip Power Amplifier (PA) with up to +20 dBm output power at the antenna port. It is also integrated programmable frequency synthesizers with integrated VCOs, I/Q generation and CMOS up/down conversion mixers. 4. Components:
Ethernet port
(10/100BaseT) Reset Button Power Jack 2 stop manual switch CONNECT THE 10/100BASET CABLING (RJ45 CONNECTOR) FOR THE EXTERNAL LAN, WAN, Used to reboot, reset to factory default, Connect the power adapter here. Use to set different operation mode, Adhoc and Infrastucture mode 5. Power part: there are several regulators are used on the board. U17, AZ1084S-3 is used to transfer DC5V to DC3V3; U1, U8 AME8805 are used to transfer DC3V3 to DC2V5; U20, 1117-ADJ is used to transfer DC3V3 to DC1V62. The core of CPU is operate at 1.5V. 6. LED part:
LED Power Color Controlled by Description Green FW on: green; (symbol) Ethernet Link Green FW Solid Green, whether 10 or 100 Mbps (symbol) Internet Link/Act Green FW ADHOC Link/Act Blue FW Alternate Blinking: Looking for network association Solid Green LED wireless connection available Alternate Blinking: Looking for network association Solid Blue LED wireless connection available 7. Switch button, SW1, it is used to reset the 88W8510. 8. Multi-layer Chip Band-Pass Filters, BP2,BP1, LCB22M2450B1, Freq. Range: 2.4~2.5GHz; IL@BW: 1.7dB 9. GaAs IC SPDT Switch, U7, HWS314, features low insertion loss and positive voltage operation with very low DC power consumption.
| 1 | Power of Attorney Letter | Cover Letter(s) | 234.28 KiB | July 16 2004 |
Dste: IAUE SS" SOOT E-wsl: DING ueesr cow Sx:
T-908-O0S-800N 16|: 1-08-60S-B0A8 voqieze: 4200 Glsst yweUcS DSiKMSA esUIS CISL" CS|MOLUIS Be0et NeV ybbiesur: eidest uc"
Lue: Blogner pensjobweuy WSUSdet
(21dusine) (puuyeq) BA: (r= == ph: Beret EOL S qoyUIIOU Of ,DSYA, Jol WS26 bniboze2 gee A CL'H 1'S005(p)"
peueilie" bniznsus fo 26ctlou 2g0! Of {NE WUFI-GLNd spnes yor Oo, Jage'ss N'2'v' eS"
bsyA jo WE sbbycsus 2 enplecy fo s qoUIg} Of [eqeLs] peuELe UST 1UCINGee LCC Lys sbbiicsuy ceyyise {psy IU ye CS2e Oj SU |UGIAIgns| sbbyIcguy (6G"* CoLboisyioU) UO Coib: ou ont peysy 2y9I] psXe se eswWe eYsct se sce Oo, ONL OMU"
qocnweuje 1s|s11UG Jo jyeze WyyeLe YUA suq 3I| CSLLIEg ONY PA Excineine CeyyICSOU MGEJ41' ECC ID VO? bASMGEI11). SMPOUSsOU' IWeINqWa we eGUIUa oO} gI) WU SI] WeyeLe 16|91UG ;o sbbycsfoU jo. PxWPbe Mils|e2e GsWE yasbie (Wogsl M6&' $US NUgELelduEg' PELEPA sN;VOUSE EXcIN2|AS CELIIICSHIOU COLD fo sc} OU ON pepsi, Dest en Leqeis] Cowunuics}ou2 CowWieeIoU
#200 GLESs YWELICS DSLKmSA eguEs CISLS CSIHOLUIS B2024 NeV Verdes juc*
| 1 | RF Exposure Info | RF Exposure Info | 7.08 KiB | July 16 2004 |
1.1. Test Result of RF Exposure Evaluation
. Product: 54 Mbps Wireless Game Adapter
. Test Item: RF Exposure Evaluation Data
. Test site: OATSI-SD
. Test Mode: Normal Operation 1.1.1. Antenna Gain The maximum Gain is 1.8 dBi. 1.1.2. EUT Operation condition Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 1.1.3. Output Power into Antenna & RF Exposure Evaluation Distance Modulation Standard: IEEE 802.11b Test Date: Jun. 26, 2004 Temperature: 24 J Humidity: 62H Channel Channel Frequency Output Power to Antenna Power Density (S) 01 06 11
(MHz) 2412 2437 2462
(dBm) 14.17 15.63 15.65
(mW/cm2) 0.009 0.013 0.013 Modulation Standard: IEEE 802.11g Test Date: Jun. 26, 2004 Temperature: 24 J Humidity: 62H Channel Channel Frequency Output Power to Antenna Power Density (S) 01 06 11
(MHz) 2412 2437 2462
(dBm) 14.11 12.34 14.47
(mW/cm2) 0.009 0.006 0.010 The MPE is calculated as 0.013 mW / cm2 < limit 1 mW / cm2. So, RF exposure limit warning or SAR test are not required.
| 1 | Test Report Part 1 | Test Report | 2.12 MiB | July 16 2004 |
FCC Test Report: FI04062402-A FCC TEST REPORT according to FCC Rules and Regulations Part 15 Subpart C Applicant Address Equipment Model No. FCC ID Trade Name Netgear Netgear Inc. 4500 Great America Parkway Santa Clara California 95054 USA 54 Mbps Wireless Game Adapter WGE111 PY3WGE111
The test result refers exclusively to the test presented test model / sample.,
Without written approval of Exclusive Certification Corp. the test report shall not be reproduced except in full. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 1 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Contents 2. 1. Report of Measurements and Examinations ..................................................................................4 1.1. List of Measurements and Examinations .............................................................................4 1.2. Antenna Requirements......................................................................................................5 1.3. Test of Conducted Emission...............................................................................................6 1.4. Test of Radiated Emission .................................................................................................8 1.5. 6dB Bandwidth .................................................................................................................9 1.6. Maximum Peak Output Power............................................................................................9 1.7. Band Edges Measurement .............................................................................................. 10 1.8. Power Spectral Density ................................................................................................... 10 1.9. Restricted Bands of Operation ......................................................................................... 11 1.10. Labeling Requirement ..................................................................................................... 11 1.11. RF Exposure .................................................................................................................. 12 Test Configuration of Equipment under Test ................................................................................ 14 2.1. Test Mode and Test Software........................................................................................... 14 2.2. Description of Test System .............................................................................................. 14 2.3. Connection Diagram of Test System................................................................................. 14 2.4. Feature of Equipment under Test ..................................................................................... 15 2.5. History of this test report .................................................................................................. 15 3. General Information of Test........................................................................................................ 16 4. Test Result and Data................................................................................................................. 17 4.1. Antenna Requirement ..................................................................................................... 17 4.2. Test Result of Conducted Emission .................................................................................. 18 4.3. RF Portion...................................................................................................................... 33 4.4. 6dB Bandwidth Measurement Data .................................................................................. 49 4.5. Peak Output Power Measurement Data............................................................................ 53 4.6. Band Edges Measurement Data ...................................................................................... 57 4.7. Power Spectral Density Measurement Data ...................................................................... 70 4.8. Test Result of RF Exposure Evaluation ............................................................................. 74 5. List of Measuring Equipment Used............................................................................................. 75 Appendix A. Photographs of EUT . .A1 ~ A5 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 2 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A CERTIFICATE OF COMPLIANCE according to FCC Rules and Regulations Part 15 Subpart C Applicant Address Equipment Model No. FCC ID Netgear Inc. 4500 Great America Parkway Santa Clara California 95054 USA 54 Mbps Wireless Game Adapter WGE111 PY3WGE111 I HEREBY CERTIFY THAT :
The measurements shown in this test report were made in accordance with the procedures given in ANSI C63.4. The equipment was passed the test performed according to FCC Rules and Regulations Part 15 Subpart C (2002). The test was carried out on Jun. 26, 2004 at Exclusive Certification Corp. Signature Anson Chou / Manager Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 3 of 75 FCC ID: PY3WGE111 1. Report of Measurements and Examinations 1.1. List of Measurements and Examinations FCC Test Report: FI04062402-A FCC Rule
. Description of Test 15.203
. Antenna Requirement 15.207
. Conducted Emission 15.209
. Radiated Emission 15.247(a)(2) . 6dB Bandwidth 15.247(b)
. Maximum Peak Output Power 15.247(c)
. 100kHz Bandwidth of Frequency Band Edges 15.247(d)
. Power Spectral Density 1.1307 1.1310 2.1091 2.1093
. RF Exposure Compliance Result Pass Pass Pass Pass Pass Pass Pass Pass Test by:
Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 4 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 1.2. Antenna Requirements 1.2.1. Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. And according to FCC 47 CFR Section 15.247 (b), if transmitting antennas of directional gain greater than 6dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 5 of 75 FCC ID: PY3WGE111 1.3. Test of Conducted Emission FCC Test Report: FI04062402-A Conducted Emissions were measured from 150 kHz to 30 MHz with a bandwidth of 9 KHz on the 115 VAC power and return leads of the EUT according to the methods defined in ANSI C63.4-1992 Section 3.1. The EUT was placed on a nonmetallic stand in a shielded room 0.8 meters above the ground plane as shown in section 2.2. The interface cables and equipment positioning were varied within limits of reasonable applications to determine the position produced maximum conducted emissions. 1.3.1. Test Procedures a. The EUT was placed 0.4 meter from the conducting wall of the shielding room was kept at least 80 centimeters from any other grounded conducting surface. b. Connect EUT to the power mains through a line impedance stabilization network (LISN). c. All the support units are connecting to the other LISN. d. The LISN provides 50 ohm coupling impedance for the measuring instrument. e. The FCC states that a 50 ohm, 50 microhenry LISN should be used. f. Both sides of AC line were checked for maximum conducted interference. g. The frequency range from 150 kHz to 30 MHz was searched. h. Set the test-receiver system to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 6 of 75 FCC ID: PY3WGE111 1.3.2. Typical Test Setup Layout of Conducted Emission FCC Test Report: FI04062402-A 10cm EUT 80cm 80cm LISN 40cm 40cm 80cm LISN 1.3.3. Conducted Emission Requirement Except for A digital devices, for equpment that is designed to be connected to the public utility
(AC) power line on any frequency voltage that is conducted back onto the AC power line on ant frequency or frequencies within the band 150KHz to 30MHz shall not exceed the limits in the following table, as measured using a 50H/50 ohms line impeddance stabilization network
(LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the Radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the band edges. Frequency Quasi Peak
(MHz) 0.15 0.5 0.5 5.0 5.0 30.0
(dB V) 66-56*
56 60 Average
(dB V) 56-46*
46 50
*Decreases with the logarithm of the frequency. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 7 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 1.4. Test of Radiated Emission Radiated emissions from 30 MHz to 25 GHz were measured according to the methods defines in ANSI C63.4-2001. The EUT was placed, 0.8 meter above the ground plane, as shown in section 5.6.3. The interface cables and equipment positions were varied within limits of reasonable applications to determine the positions producing maximum radiated emissions 1.4.1. Test Procedures 1. The EUT was placed on a rotatable table top 0.8 meter above ground. 2. The EUT was set 3 meters from the interference receiving antenna which was mounted on the top of a variable height antenna tower. 3. The table was rotated 360 degrees to determine the position of the highest radiation. 4. The antenna is a broadband antenna and its height is varied between one meter and four meters above ground to find the maximum value of the field strength both horizontal polarization and vertical polarization of the antenna are set to make the measurement. 5. For each suspected emission the EUT was arranged to its worst case and then tune the antenna tower (from 1 M to 4 M) and turn table (from 0 degree to 360 degrees) to find the maximum reading. 6. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function and specified 7. bandwidth with Maximum Hold Mode. If the emission level of the EUT in peak mode was 3 dB lower than the limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method and reported. 8. For testing above 1GHz, the emission level of the EUT in peak mode was 20dB lower than average limit (that means the emission level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. 1.4.2. Typical Test Setup Layout of Radiated Emission Antenna Equipment under Test
* Test distance Turn Table 0.8M Ground Plane Receiver Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 8 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 1.5. 6dB Bandwidth 1.5.1. Test ProcedureG 1. The transmitter output was connected to the spectrum analyzer. 2. Set RBW of spectrum analyzer to 100 KHz and VBW to 100 KHz. 3. The 6 dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 6 dB. 1.5.2. Test Setup LayoutG 1.6. Maximum Peak Output Power 1.6.1. Test ProcedureG The antenna port] RF output^ of the EUT was connected to the input] RF input^ of a spectrum analyzer. Power was read directly from the spectrum analyzer and cable loss connection was added to the reading to obtain power at the EUT antenna terminal. The EUT Output Power was set to maximum to produce the worse case test result. 1.6.2. Test Setup LayoutG Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 9 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 1.7. Band Edges Measurement 1.7.1. Test ProcedureG 1. The transmitter output was connected to the spectrum analyzer via a low lose cable. 2. Set both RBW and VBW of spectrum analyzer to 100 KHz with convenient frequency span including 100 MHz bandwidth from band edge. 3. The band edges was measured and recorded. 1.8. Power Spectral Density 1.8.1. Test ProcedureG 1. The transmitter output was connected to spectrum analyzer. 2. The spectrum analyzers resolution bandwidth were set at 3KHz RBW and 30KHz VBW as that of the fundamental frequency. Set the sweep time=span/3KHz. 3. The power spectral density was measured and recorded. 4. The Sweep time is allowed to be longer than span/3KHz for a full response of the mixer in the spectrum analyzer. 1.8.2. Test Setup LayoutG Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 10 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 1.9. Restricted Bands of Operation Only spurious emissions are permitted in any of the frequency bands listed below:
MHz MHz MHz 0.09000 0.11000 0.49500 0.505**
2.17350 2.19050 4.12500 4.12800 4.17725 4.17775 4.20725 4.20775 6.21500 6.21800 6.26775 6.26825 6.31175 6.31225 8.29100 8.29400 8.36200 8.36600 8.37625 8.38675 8.41425 8.41475 12.29000 12.29300 12.51975 12.52025 12.57675 12.57725 13.36000 13.41000
**: Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz 16.42000 16.42300 16.69475 16.69525 16.80425 16.80475 25.50000 25.67000 37.50000 38.25000 73.00000 74.60000 74.80000 75.20000 108.00000 121.94000 123.00000 138.00000 149.90000 150.05000 156.52475 156.52525 156.70000 156.90000 162.01250 167.17000 167.72000 173.20000 240.00000 285.00000 322.00000 335.40000 399.9 410.0 608.0 614.0 960.0 1240.0 1300.0 1427.0 1435.0 1626.5 1645.5 1646.5 1660.0 1710.0 1718.8 1722.2 2200.0 2300.0 2310.0 2390.0 2483.5 2500.0 2655.0 2900.0 3260.0 3267.0 3332.0 3339.0 3345.8 3358.0 3600.0 4400.0 GHz 4.500 5.250 5.350 5.460 7.250 7.750 8.025 8.500 9.000 9.200 9.300 9.500 10.600 12.700 13.250 13.400 14.470 14.500 15.350 16.200 17.700 21.400 22.010 23.120 23.600 24.000 31.200 31.800 36.430 36.500 Above 38.6 1.10. Labeling Requirement The device shall bear the following statement in a conspicuous location on the device:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 11 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 1.11. RF Exposure FCC Rules and Regulations Part 1.1307, 1.1310, 2.1091, 2.1093:
RF Exposure Compliance 1.11.1. Limit For Maximum Permissible Exposure (MPE)
(A) Limits for Occupational / Controlled Exposure Frequency Range
(MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S)
(mW/ cm) 0.3-3.0 3.0-30 30-300 300-1500 1500-100,000 614 1842/f 61.4 1.63 4.89/f 0.163
(100)*
(900/f)*
1.0 F/300 5 Averaging Time
|E|,|H| or S
(minutes) 6 6 6 6 6
(B) Limits for General Population / Uncontrolled Exposure Frequency Range
(MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) 0.3-1.34 1.34-30 30-300 300-1500 614 824/f 27.5 1.63 2.19/f 0.073 1500-100,000 F=frequency in MHz *Plane-wave equivalent power density 1.0 Power Density (S)
(mW/cm)
(100)*
(180/f)*
0.2 F/1500 Averaging Time
|E|,|H| or S
( minutes ) 30 30 30 30 30 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 12 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 1.11.2. MPE Calculations S = (p x G) / (4 x k x d2) Where:
S = power density P = transmitter conducted power in (mW) G = antenna numeric gain d = distance to radiation center (m) or (.022) = 0.20 cm 1.11.3. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Proposed RF exposure safety information to include in Users Manual. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 13 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 2. Test Configuration of Equipment under Test 2.1. Test Mode and Test Software The following test mode and test software was performed for conduction and radiation test:
802.11b (CH LO: 2412MHz) 802.11b (CH MID: 2437MHz) 802.11b (CH HI: 2462MHz)
802.11g (CH LO: 2412MHz) 802.11g (CH MID: 2437MHz) 802.11g (CH HI: 2462MHz)
An executive programs, DUTAPIDLL Application under WIN XP.
Link Mode (The function of EUT is data transmitting which can be operated by connecting with two hosts through UTP cable and wireless .)
During the test, Ping. exe was executive under WinXP to link with the remote workstation to transmitting data by UTP cable and wireless. 2.2. Description of Test System Device PC (Remote site) Monitor (Remote site) Model No. IGV 510A Manufacturer Description IBM SlimAGE Power Cord, Unshielding, 1.8m Power Cord, Unshielding, 1.8m Data Cable, Shielding, 1.35m Data Cable, Shielding, 1.85m Data Cable, Shielding, 1.85m Power Cord, Unshielding, 1.8m Keyboard (Remote site) KB-0225 Mouse (Remote site) MO28VO AP Router(Remote site) ARM804 IBM IBM Abocom Use Cable:
Cable RJ-45 Description Unshielding, 10m 2.3. Connection Diagram of Test System Remote workstation 1 EUT 1. The TP cable is connected from remote workstation to the EUT. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 14 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 2.4. Feature of Equipment under Test Type of Modulation Number of Channels BPSK, QPSK, CCK-OFDM, OFDM USA/Canada: 11 European: 13 Japan: 13, 14 2412MHz~2484MHz Frequency Band Carrier Frequency of each channel 2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484MHz 16MHz / 802.11g, 22MHz / 802.11b Bandwidth of each channel Maximum Output Power to Antenna 20dBm 374MHz IF & L.O. frequency Antenna Type / Class and Gain 1.8dBi Transceiver Function Type DC5V, 2A Power Rating (DC/AC, Voltage) Basic function of product IEEE 802.11g/b Wireless Game Adapter Normal 0~40J Temperature Range (Operating) 2.5. History of this test report ORIGINAL. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 15 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 3. General Information of Test Test Site:
Exclusive Certification Corp. 4F-2, No. 28, Lane 78, Xing-Ai Rd. Nei-hu, Taipei City 114 Taiwan R.O.C. Test Site Location (OATS1-SD): No.68-1, Shihbachongsi, shihding Township, Taipei County 223, Taiwan, R.O.C. Test Voltage:
AC 110V/ 60Hz Test in Compliance with:
ANSI C63.4-1992 FCC Part 15 Subpart C Frequency Range Investigated: Conduction: from 150kHz to 30 MHz Radiation: from 30 MHz to 24620MHz Test Distance:
The test distance of radiated emission from antenna to EUT is 10 M. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 16 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 4. Test Result and Data 4.1. Antenna Requirement 4.1.1. Antenna Construction and Directional Gain Antenna type: Integral antenna; the Maximum antenna gain 1.8 dBi Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 17 of 75 FCC ID: PY3WGE111 4.2. Test Result of Conducted Emission FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 18 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 19 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 20 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 21 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 22 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 23 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 24 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 25 of 75 FCC ID: PY3WGE111
| 1 | Test Report Part 2 | Test Report | 3.31 MiB | July 16 2004 |
FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 26 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 27 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 28 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 29 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 30 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Test by:
Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 31 of 75 FCC ID: PY3WGE111 4.2.1. Photographs of Conducted Emission Test FCC Test Report: FI04062402-A FRONT VIEW REAR VIEW Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 32 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 4.3. RF Portion 4.3.1. Test Result of Conducted Emission Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 33 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 34 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 35 of 75 FCC ID: PY3WGE111 4.3.2. Test Result of Radiated Emission FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 36 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 37 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 38 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Test by:
Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 39 of 75 FCC ID: PY3WGE111 Modulation Standard: IEEE 802.11b FCC Test Report: FI04062402-A a) Emission frequencies below 1 GHz Test Date: Jun. 26, 2004 Temperature: 24 Corrected Frequency Ant-Pol Meter Reading
(dBuV) 56.73 56.03 54.96 59.10 43.31 J Humidity:
62H Result@3m
(dBuV/m) Limit@3m
(dBuV/m) Margin
(dB) Table Deg. 38.45 42.63 42.60 44.73 42.25 43.5 46.0 46.0 46.0 46.0
-5.05
-3.37
-3.40
-1.27
-3.75 270 270 270 270 270 Ant High
(m) 1.5 1.5 1.5 1.5 1.5 Factor
(dB)
-18.28
-13.40
-12.36
-14.37
-1.06
(MHz) H/V 201.69 252.13 300.63 300.63 701.24 V V V H H Notes:
1. Result = Meter Reading + Corrected Factor 2. Corrected Factor = Antenna Factor + Cable Loss Amplifier b) Emission frequencies above 1 GHz Radiated emission frequencies above 1 GHz to 25 GHz were too low to be measured. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 40 of 75 FCC ID: PY3WGE111 Modulation Standard: IEEE 802.11g FCC Test Report: FI04062402-A a) Emission frequencies below 1 GHz Test Date: Jun. 26, 2004 Temperature: 24 Corrected Frequency Ant-Pol Meter Reading
(dBuV) 53.45 56.73 57.03 55.96 58.92 52.86 43.62 J Humidity:
62H Result@3m
(dBuV/m) Limit@3m
(dBuV/m) Margin
(dB) Table Deg. 36.18 38.45 43.63 43.60 44.55 42.01 42.56 43.5 43.5 46.0 46.0 46.0 46.0 46.0
-7.32
-5.05
-2.37
-2.40
-1.45
-3.99
-3.44 270 270 270 270 270 270 270 Ant High
(m) 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Factor
(dB)
-17.27
-18.28
-13.40
-12.36
-14.37
-10.85
-1.06
(MHz) H/V 101.78 201.69 252.13 300.63 300.63 352.04 701.24 V V V V H H H Notes:
1. Result = Meter Reading + Corrected Factor 2. Corrected Factor = Antenna Factor + Cable Loss Amplifier b) Emission frequencies above 1 GHz Radiated emission frequencies above 1 GHz to 25 GHz were too low to be measured. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 41 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Modulation Standard: IEEE 802.11b Pol/Phase: Horizontal Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 42 of 75 FCC ID: PY3WGE111 Modulation Standard: IEEE 802.11b Pol/Phase: Vertical FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 43 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 44 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Modulation Standard: IEEE 802.11g Pol/Phase: Horizontal Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 45 of 75 FCC ID: PY3WGE111 Modulation Standard: IEEE 802.11g Pol/Phase: Vertical FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 46 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 47 of 75 FCC ID: PY3WGE111 4.3.3. Photographs of Radiated Emission Test FCC Test Report: FI04062402-A FRONT VIEW REAR VIEW Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 48 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 4.4. 6dB Bandwidth Measurement Data
(1) Modulation Standard: IEEE 802.11b Test Date: Jun. 26, 2004 Temperature: 24 Humidity:
a) Channel 01: 6dB Emission Bandwidth is 8.8 MHz b) Channel 06: 6dB Emission Bandwidth is 8.9 MHz c) Channel 11: 6dB Emission Bandwidth is 8.8 MHz J 62H
(2) Modulation Standard: IEEE 802.11g Test Date: Jun. 26, 2004 Temperature: 24 Humidity:
J 62H a) Channel 01: 6dB Emission Bandwidth is 15.5 MHz b) Channel 06: 6dB Emission Bandwidth is 15.5 MHz c) Channel 11: 6dB Emission Bandwidth is 15.4 MHz Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 49 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 50 of 75 FCC ID: PY3WGE111
| 1 | Test Report Part 3 | Test Report | 2.59 MiB | July 16 2004 |
FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 51 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 52 of 75 FCC ID: PY3WGE111 4.5. Peak Output Power Measurement Data FCC Test Report: FI04062402-A
(1) Modulation Standard: IEEE 802.11b Test Date: Jun. 26. 2004 Temperature: 24 Humidity:
a) Channel 01: Output Peak Power is 14.17 dBm or 26.122 mW b) Channel 06: Output Peak Power is 15.63 dBm or 36.599 mW c) Channel 11: Output Peak Power is 15.65 dBm or 36.728 mW J 62H
(2) Modulation Standard: IEEE 802.11g Test Date: Jun. 26. 2004 Temperature: 24 Humidity:
a) Channel 01: Output Peak Power is 14.11 dBm or 25.763 mW b) Channel 06: Output Peak Power is 12.34 dBm or 17.140 mW c) Channel 11: Output Peak Power is 14.47 dBm or 27.990 mW J 62H Note: Conducted Power = Reading Value + Cable Loss Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 53 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 54 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 55 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 56 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 4.6. Band Edges Measurement Data
(1) Modulation Standard: IEEE 802.11b Test Date: Jun. 26. 2004 Temperature: 24 J Humidity: 62H a) Lower Band Edge: maximum value is -40.16 dBm that is attenuated more than 20dB b) Upper Band Edge: maximum value is -34.66 dBm that is attenuated more than 20dB
(2) Modulation Standard: IEEE 802.11g Test Date: Jun. 26. 2004 Temperature: 24J Humidity: 62H a) Lower Band Edge: maximum value is -46.53 dBm that is attenuated more than 20dB b) Upper Band Edge: maximum value is -51.17 dBm that is attenuated more than 20dB Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 57 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 58 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 59 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 60 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 61 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 62 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 63 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 4.6.1. Note on Band edge Emission Modulation Standard: IEEE 802.11b Operation Mode: Normal Operation Test Date: Jun. 26, 2004 Temperature: 24 J Humidity: 62H a) Channel 1 Fundamental Frequency: 2412 MHz Frequency
(MHz) 2359.980 2359.980 2376.096 2376.096 Level (dBuV) polarization Remark 50.85
---
41.32
---
V V H H Peak Ave Peak Ave Limit@3m
(dBuV/m) Peak Ave. 54 74 74 54 54 74 74 54 Margin
(dB) Table Deg.
(Deg.) Ant High
(m)
-23.15
---
-32.68
---
270
---
270
---
1.5
---
1.5
---
b) Channel 11 Fundamental Frequency: 2462 MHz Level (dBuV) polarization Remark 48.15
---
38.94
---
V V H H Peak Ave Peak Ave Limit@3m
(dBuV/m) Peak Ave. 74 54 54 74 54 74 74 54 Margin
(dB) Table Deg.
(Deg.) Ant High
(m)
-25.85
---
-35.06
---
270
---
270
---
1.5
---
1.5
---
Frequency
(MHz) 2483.964 2483.964 2486.016 2486.016 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 64 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 4.6.2. Modulation Standard: IEEE 802.11g Operation Mode: Normal Operation Test Date: Jun. 26, 2004 Temperature: 24 J Humidity: 62H c) Channel 1 Fundamental Frequency: 2412 MHz Frequency
(MHz) 2360.184 2360.184 2376.096 2376.096 Level (dBuV) polarization Remark 47.37
---
37.29
---
V V H H Peak Ave Peak Ave Limit@3m
(dBuV/m) Peak Ave. 54 74 54 74 74 54 54 74 Margin
(dB) Table Deg.
(Deg.) Ant High
(m)
-26.63
---
-36.71
---
270
---
270
---
1.5 1.5 1.5 1.5 d) Channel 11 Fundamental Frequency: 2462 MHz Frequency
(MHz) 2483.964 2483.964 2486.016 2486.016 Level (dBuV) polarization Remark 46.48
---
38.80
---
V V H H Peak Ave Peak Ave Limit@3m
(dBuV/m) Peak Ave. 54 74 74 54 54 74 74 54 Margin
(dB) Table Deg.
(Deg.) Ant High
(m)
-27.52
---
-35.20
---
270
---
270
---
1.5 1.5 1.5 1.5 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 65 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Modulation Standard: IEEE 802.11b Pol/Phase: Vertical Pol/Phase: Horizontal Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 66 of 75 FCC ID: PY3WGE111 Pol/Phase: Vertical Pol/Phase: Horizontal FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 67 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Modulation Standard: IEEE 802.11g Pol/Phase: Vertical Pol/Phase: Horizontal Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 68 of 75 FCC ID: PY3WGE111 Pol/Phase: Vertical Pol/Phase: Horizontal FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 69 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 4.7. Power Spectral Density Measurement Data
(1) Modulation Standard: IEEE 802.11b Test Date: Jun. 26, 2004 Temperature: 24J Humidity: 62H a) Channel 01: Maximum Power Density of 3 kHz Bandwidth is -9.18 dBm b) Channel 06: Maximum Power Density of 3 kHz Bandwidth is -11.05 dBm c) Channel 11: Maximum Power Density of 3 kHz Bandwidth is -12.92 dBm
(2) Modulation Standard: IEEE 802.11g Test Date: Jun. 26, 2004 Temperature: 24 J Humidity: 62H a) Channel 01: Maximum Power Density of 3 kHz Bandwidth is -24.68 dBm b) Channel 06: Maximum Power Density of 3 kHz Bandwidth is -24.98 dBm c) Channel 11: Maximum Power Density of 3 kHz Bandwidth is -22.54 dBm Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 70 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 71 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 72 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 73 of 75 FCC ID: PY3WGE111 FCC Test Report: FI04062402-A 4.8. Test Result of RF Exposure Evaluation
. Product: 54 Mbps Wireless Game Adapter
. Test Item: RF Exposure Evaluation Data
. Test site: OATSI-SD
. Test Mode: Normal Operation 4.8.1. Antenna Gain The maximum Gain is 1.8 dBi. 4.8.2. EUT Operation condition Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 4.8.3. Output Power into Antenna & RF Exposure Evaluation Distance Modulation Standard: IEEE 802.11b Test Date: Jun. 26, 2004 Temperature: 24 J Humidity: 62H Channel Channel Frequency Output Power to Antenna Minimum allowable Distance 01 06 11
(MHz) 2412 2437 2462
(dBm) 14.17 15.63 15.65 From Skin (cm) 1.934 2.288 2.294 Modulation Standard: IEEE 802.11g Test Date: Jun. 26, 2004 Temperature: 24 J Humidity: 62H Channel Channel Frequency Output Power to Antenna Minimum allowable Distance 01 06 11
(MHz) 2412 2437 2462
(dBm) 14.11 12.34 14.47 From Skin (cm) 1.432 1.168 1.492 The distance r (4th column) calculated from the Friis transmission formula is far shorter than 20 cm separation requirement. So, RF exposure limit warning or SAR test are not required. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 74 of 75 FCC ID: PY3WGE111 5. List of Measuring Equipment Used FCC Test Report: FI04062402-A Type CBL6111C RFP4002 SCR3501 8648B 8594E 8447D 8447D E4416A E9327A AD-100 AD-100 R3131A FSP40 8449B 3115 3115 3116 3116 8546A 85460A 83640A 8491B 8491B TMJ-9712 84300-80038 HP 84300-80038 HP GM GPD-3030 AFC-11005 APC Manufacturer Serial No. Schaffner Schaffner Schaffner HP HP Agilent Agilent Agilent Agilent COM-Power 721011 COM-Power 721010 Advantest R&S Agilent EMCO EMCO EMCO EMCO HP HP HP Agilent Agilent T Machine Valid Date. 2004/11/03 2762 2004/11/03 010 437 2004/11/03 3629U00612 2006/02/08 3520A01913 2005/01/15 2944A10593 2004/10/09 2944A10531 2004/07/08 GB41292146 2004/11/05 US40441392 2004/10/06 2004/12/02 2004/12/02 2004/11/24 131000021 100047 2004/12/16 3008A01954 2005/01/04 31601 2005/01/13 2005/01/14 31589 31970 2005/01/29 31974 2005/01/29 3807A00454 2005/02/12 3704A00386 2005/02/12 2927A00107 2006/03/16 2004/12/16 50703 50705 2004/12/16 T-12-040111 2005/03/05 N/A 002 N/A 006 7020936 N/A F103120008 N/A Instrument/Ancillary No 1 Bilog Antenna 2 Preamplifier 3 Receiver 4 Signal Generator 5 Spectrum Analyzer 6 Amplifier 7 Amplifier 8 Series Power Meter 9 Power Sensor 10 Dipole Antenna 11 Dipole Antenna 12 Spectrum Analyzer 13 Spectrum Analyzer 14 Preamplifier 15 Horn Antenna 16 Horn Antenna 17 Horn Antenna 18 Horn Antenna 19 EMI Receiver 20 RF Filter Section 21 Signal Generator 22 Attenuator 23 Attenuator 24 Temperature Chamber 25 High Pass Filter 26 High Pass Filter 27 DC Power Supply 28 AC Power Converter Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: July. 01, 2004 75 of 75 FCC ID: PY3WGE111
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2004-07-16 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2004-07-16
|
||||
| 1 | Applicant's complete, legal business name |
Netgear Incorporated
|
||||
| 1 | FCC Registration Number (FRN) |
0022158786
|
||||
| 1 | Physical Address |
350 East Plumeria Drive
|
||||
| 1 |
San Jose, CA
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
h******@americantcb.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
PY3
|
||||
| 1 | Equipment Product Code |
WGE111
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
D**** K****
|
||||
| 1 | Telephone Number |
40889********
|
||||
| 1 | Fax Number |
40890********
|
||||
| 1 |
d******@netgear.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
Exclusive Certification Corp.
|
||||
| 1 | Name |
C****** W******
|
||||
| 1 | Physical Address |
4F-2 No. 28, Lane 78, Xing-Ai Road
|
||||
| 1 |
Taipei City, 114
|
|||||
| 1 |
Taiwan
|
|||||
| 1 | Telephone Number |
+886-******** Extension:
|
||||
| 1 | Fax Number |
+886-********
|
||||
| 1 |
c******@ecc.com.tw
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 54 Mbps Wireless Game Adapter | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power Output listed is Conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Cerpass Technology Corporation
|
||||
| 1 | Name |
A****** C******
|
||||
| 1 | Telephone Number |
886-2******** Extension:
|
||||
| 1 | Fax Number |
886-2********
|
||||
| 1 |
a******@ecc.com.tw
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0370000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC