all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 476.64 KiB | January 29 2015 / July 28 2015 | |||
1 2 3 |
|
User manual | Users Manual | 478.73 KiB | ||||
1 2 3 |
|
Internal Photos | Internal Photos | 1.89 MiB | January 29 2015 / July 28 2015 | |||
1 2 3 |
|
External Photos | External Photos | 199.32 KiB | January 29 2015 / July 28 2015 | |||
1 2 3 |
|
ID Label Location Information | ID Label/Location Info | 318.08 KiB | January 29 2015 | |||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 |
|
Attestation - Channel and Mode Declaration | Attestation Statements | 126.31 KiB | January 29 2015 | |||
1 2 3 | Block | Block Diagram | January 29 2015 | confidential | ||||
1 2 3 |
|
Cover Letter - Agent Authorization | Cover Letter(s) | 427.24 KiB | January 29 2015 | |||
1 2 3 |
|
Cover Letter - Confidentiality Request - Long Term | Cover Letter(s) | 74.39 KiB | January 29 2015 | |||
1 2 3 |
|
Cover Letter - Confidentiality Request - Short Term | Cover Letter(s) | 173.24 KiB | January 29 2015 | |||
1 2 3 | Operational Description | Operational Description | January 29 2015 | confidential | ||||
1 2 3 |
|
RF Exposure Information (MPE) | RF Exposure Info | 372.03 KiB | January 29 2015 | |||
1 2 3 | Schematics | Schematics | January 29 2015 | confidential | ||||
1 2 3 | Software Operating Description (Long Term Confidentiality) | Operational Description | January 29 2015 | confidential | ||||
1 2 3 |
|
Test Report (Co-location) | Test Report | 545.72 KiB | January 29 2015 | |||
1 2 3 |
|
Test Report (DTS) rev | Test Report | 2.01 MiB | January 29 2015 | |||
1 2 3 |
|
Test Report (NII) | Test Report | 1011.37 KiB | January 29 2015 | |||
1 2 3 |
|
Test Setup Photos | Test Setup Photos | 639.65 KiB | January 29 2015 / July 28 2015 |
1 2 3 | User Manual | Users Manual | 476.64 KiB | January 29 2015 / July 28 2015 |
AC750 WiFi Range Extender802.11ac Dual Band Gigabit Data Sheet EX6100 Boost your exiting WiFi Dual band WiFi up to 750Mbps Supports new 802.11ac & b/g/n WiFi devices External antennas for better performance AC750 DUAL BAND RANGE Overview NETGEAR AC750 WiFi Range Extender boosts your existing network range & speed, delivering AC dual band WiFi up to 750 Mbps. It works with any standard WiFi router & is ideal for HD video streaming & gaming. Get the connectivity you need for iPads, smartphones, laptops & more. More WiFi Standards Two WiFi Modes Gigabit Ethernet Port Create faster access for 802.11 b/g/n
& ac WiFi devices. Extender mode to boost existing WiFi. Access Point mode to create new AC WiFi access. Connect a wired device like Blu-ray player, game console, smart TV or streaming player to your WiFi network. Simultaneous Dual Band WiFi External Antennas FastLane Technology Extend 2.4 & 5GHz WiFi up to 750Mbps
& reduce interference. For better WiFi coverage & more speed. Use both WiFi bands to establish one super high-speed connection; ideal for HD streaming & gaming. PAGE 1 OF 4 AC750 WiFi Range Extender802.11ac Dual Band Gigabit Data Sheet EX6100 WiFi Range Extenders boost your existing WiFi & deliver greater wireless speed, range & connectivity you desire for iPads, smartphones, laptops & more. WiFi Range Extender Boosts the range of your existing WiFi & creates a stronger signal in hard-to-reach areas. Network Connections Existing WiFi Sometimes your router does not provide the WiFi coverage you need. Smart LED indicators Power on/off Secure Connection
(WPS) Wall plug Extender or Access Point mode switch Gigabit Ethernet port Smart LED indicators help find the best extender placement for optimal WiFi coverage while displaying real-time, extender network status. Easy, secured connection at the push of a button for either WiFi Range Extender mode or Access Point mode setup. PAGE 2 OF 4 AC750 WiFi Range Extender802.11ac Dual Band Gigabit Data Sheet EX6100 WiFi Analytics App How strong is your WiFi signal? Use the NETGEAR WiFi Analytics app & get advanced analytics to optimize your existing or newly extended WiFi network. Check your network status, WiFi signal strength, identify crowded WiFi channels & much more!
Heres what you can do with the WiFi Analytics App!
Get a network status overview Check WiFi signal strength Measure WiFi channel interference Keep track of WiFi strength by location and more... Scan to install app PAGE 3 OF 4 AC750 WiFi Range Extender802.11ac Dual Band Gigabit Data Sheet EX6100 Package Contents Support Security AC750 WiFi Range Extender (EX6100) 24/7 basic technical support free for 90 days WiFi Protected Access (WPA/WPA2PSK) Installation guide Physical Specifications Dimensions: 4.80 x 2.91 x 1.50 in
(122 x 74 x 38 mm) Weight: 0.47 lb (0.213 kg) Warranty NETGEAR 1-year limited warranty Ease of Use and WEP Standards CD-less setupgreat for mobile devices Push N Connect using Wi-Fi Protected Setup
(WPS)1 IEEE 802.11 b/g/n 2.4GHz IEEE 802.11 a/n/ac 5GHz System Requirements One (1) 10/100/1000 Mbps Gigabit Ethernet port with auto-sensing technology 2.4 and/or 5GHz 802.11 a/b/g/n/ac WiFi router or gateway Microsoft Internet Explorer 5.0, Firefox 2.0 or Safari 1.4 or Google Chrome 11.0 browsers or higher 2013 NETGEAR, Inc. NETGEAR, and the NETGEAR logo, are trademarks and/or registered trademarks of NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved. This product is packaged with a limited warranty, the acceptance of which is a condition of sale. Warranty valid only when purchased from a NETGEAR authorized reseller.
*24/7 basic technical support provided for 90 days from date of purchase when purchased from a NETGEAR authorized reseller. 1 Works with devices supporting Wi-Fi Protected Setup (WPS). Data throughput, signal range, and wireless coverage per sq. ft. are not guaranteed and may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Specifications are subject to change without notice. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non-standard or outdated. NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, 1-888-NETGEAR (638-4327), E-mail: info@NETGEAR.com, www.NETGEAR.com D-EX6100-0 PAGE 4 OF 4 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
to which the receiver is connected.
-
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
1 2 3 | User manual | Users Manual | 478.73 KiB |
AC750 WiFi Range Extender802.11ac Dual Band Gigabit Data Sheet EX6100 Boost your exiting WiFi Dual band WiFi up to 750Mbps Supports new 802.11ac & b/g/n WiFi devices External antennas for better performance AC750 DUAL BAND RANGE Overview NETGEAR AC750 WiFi Range Extender boosts your existing network range & speed, delivering AC dual band WiFi up to 750 Mbps. It works with any standard WiFi router & is ideal for HD video streaming & gaming. Get the connectivity you need for iPads, smartphones, laptops & more. More WiFi Standards Two WiFi Modes Gigabit Ethernet Port Create faster access for 802.11 b/g/n
& ac WiFi devices. Extender mode to boost existing WiFi. Access Point mode to create new AC WiFi access. Connect a wired device like Blu-ray player, game console, smart TV or streaming player to your WiFi network. Simultaneous Dual Band WiFi External Antennas FastLane Technology Extend 2.4 & 5GHz WiFi up to 750Mbps
& reduce interference. For better WiFi coverage & more speed. Use both WiFi bands to establish one super high-speed connection; ideal for HD streaming & gaming. PAGE 1 OF 4 AC750 WiFi Range Extender802.11ac Dual Band Gigabit Data Sheet EX6100 WiFi Range Extenders boost your existing WiFi & deliver greater wireless speed, range & connectivity you desire for iPads, smartphones, laptops & more. WiFi Range Extender Boosts the range of your existing WiFi & creates a stronger signal in hard-to-reach areas. Network Connections Existing WiFi Sometimes your router does not provide the WiFi coverage you need. Smart LED indicators Power on/off Secure Connection
(WPS) Wall plug Extender or Access Point mode switch Gigabit Ethernet port Smart LED indicators help find the best extender placement for optimal WiFi coverage while displaying real-time, extender network status. Easy, secured connection at the push of a button for either WiFi Range Extender mode or Access Point mode setup. PAGE 2 OF 4 AC750 WiFi Range Extender802.11ac Dual Band Gigabit Data Sheet EX6100 WiFi Analytics App How strong is your WiFi signal? Use the NETGEAR WiFi Analytics app & get advanced analytics to optimize your existing or newly extended WiFi network. Check your network status, WiFi signal strength, identify crowded WiFi channels & much more!
Heres what you can do with the WiFi Analytics App!
Get a network status overview Check WiFi signal strength Measure WiFi channel interference Keep track of WiFi strength by location and more... Scan to install app PAGE 3 OF 4 AC750 WiFi Range Extender802.11ac Dual Band Gigabit Data Sheet EX6100 Package Contents Support Security AC750 WiFi Range Extender (EX6100) 24/7 basic technical support free for 90 days WiFi Protected Access (WPA/WPA2PSK) Installation guide Physical Specifications Dimensions: 4.80 x 2.91 x 1.50 in
(122 x 74 x 38 mm) Weight: 0.47 lb (0.213 kg) Warranty NETGEAR 1-year limited warranty Ease of Use and WEP Standards CD-less setupgreat for mobile devices Push N Connect using Wi-Fi Protected Setup
(WPS)1 IEEE 802.11 b/g/n 2.4GHz IEEE 802.11 a/n/ac 5GHz System Requirements One (1) 10/100/1000 Mbps Gigabit Ethernet port with auto-sensing technology 2.4 and/or 5GHz 802.11 a/b/g/n/ac WiFi router or gateway Microsoft Internet Explorer 5.0, Firefox 2.0 or Safari 1.4 or Google Chrome 11.0 browsers or higher 2013 NETGEAR, Inc. NETGEAR, and the NETGEAR logo, are trademarks and/or registered trademarks of NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved. This product is packaged with a limited warranty, the acceptance of which is a condition of sale. Warranty valid only when purchased from a NETGEAR authorized reseller.
*24/7 basic technical support provided for 90 days from date of purchase when purchased from a NETGEAR authorized reseller. 1 Works with devices supporting Wi-Fi Protected Setup (WPS). Data throughput, signal range, and wireless coverage per sq. ft. are not guaranteed and may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Specifications are subject to change without notice. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non-standard or outdated. NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, 1-888-NETGEAR (638-4327), E-mail: info@NETGEAR.com, www.NETGEAR.com D-EX6100-0 PAGE 4 OF 4 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
to which the receiver is connected.
-
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to indoor environment. The band from 5600-5650MHz will be disabled by the software during the manufacturing and cannot be changed by the end user. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement:
This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-247 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate;
and
(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.
(v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
Le guide dutilisation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 5 350 MHz et de 5470 5725 MHz doit tre conforme la limite de la p.i.r.e;
(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;
(iv) les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, et nonce la section 6.2.2 3), doivent tre clairement indiqus.
(v) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
1 2 3 | Internal Photos | Internal Photos | 1.89 MiB | January 29 2015 / July 28 2015 |
Report No.: 141117E18 Page 2 Report No.: 141117E18 Page 3 Report No.: 141117E18 Page 4 Report No.: 141117E18 Page 5 Report No.: 141117E18 Page 6 Report No.: 141117E18 Page 7 Report No.: 141117E18 Page 8 Report No.: 141117E18 Page 9
1 2 3 | External Photos | External Photos | 199.32 KiB | January 29 2015 / July 28 2015 |
CONSTRUCTION PHOTOS OF EUT Report No.: 141117E18 Page 1
1 2 3 | ID Label Location Information | ID Label/Location Info | 318.08 KiB | January 29 2015 |
FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. EUT Back Label
(Fig. 1) FCC ID: PY314400298 REV DESCRIPTION OF REVISION 01 INITIAL DOCUMENT CREATION ENG APPD DATE M HUMPHREY 18DEC14 i n a w a T n i e d a M 7 Pantone Cool Gray 11C NOTE:
1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. SCALE IS 2:1 3. INK COLOR IS SHOWN TO THE RIGHT. 4. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 5. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 6. See NTGR DOC-00112 for SN standard. 7. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 8. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). AUTHOR:
SHEET:
M HUMPHREY 1 of 1 TITLE:
AW,EX3700PA,V1,PLBL THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. P/N:
AW-13084-01 REV:
01
1 2 3 | Attestation - Channel and Mode Declaration | Attestation Statements | 126.31 KiB | January 29 2015 |
Date: 2015/1/16 NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 G E N E R A L D E C L A R A T I O N We, NETGEAR, INC. declare that the device does not support channel 12 ~ 14 in 2.4GHz band and any non-
US channels in all the operational mode(s) for the following product. FCC ID: PY314400298 If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!
------------------------------------------------------
David Kay/ Regulatory Compliance Manager NETGEAR, INC. TEL: 4088903657 FAX: 4089078097 E-mail: david.kay@netgear.com
1 2 3 | Cover Letter - Agent Authorization | Cover Letter(s) | 427.24 KiB | January 29 2015 |
NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 P O W E R O F A T T O R N E Y Date: 2015/1/16 FCC ID: PY314400298 To whom it may concern:
We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please dont hesitate to Contact us. Thank you!
Sincerely yours,
------------------------------------------------------
David Kay/ Regulatory Compliance Manager NETGEAR, INC. TEL: 4088903657 FAX: 4089078097 E-mail: david.kay@netgear.com
1 2 3 | Cover Letter - Confidentiality Request - Long Term | Cover Letter(s) | 74.39 KiB | January 29 2015 |
NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2015/1/16 FCC ID: PY314400298 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:
Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours,
------------------------------------------------------
David Kay/ Regulatory Compliance Manager NETGEAR, INC. TEL: 4088903657 FAX: 4089078097 E-mail: david.kay@netgear.com
1 2 3 | Cover Letter - Confidentiality Request - Short Term | Cover Letter(s) | 173.24 KiB | January 29 2015 |
NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: PY314400298 Date: January 19, 2015 Pursuant to Sections 0.457 and 0.459 of the commissions rules, we request short-term confidential treatment for the following information until 180 days in order to ensure sensitive business information remains confidential until the actual marketing of the device:
External photos Test Setup photos Users manual Internal Photos Sincerely yours,
------------------------------------------------------
David Kay/ Regulatory Compliance Manager NETGEAR, INC. TEL: 4088903657 FAX: 4089078097 E-mail: david.kay@netgear.com
1 2 3 | RF Exposure Information (MPE) | RF Exposure Info | 372.03 KiB | January 29 2015 |
RF EXPOSURE REPORT REPORT NO.: SA141117E18 MODEL NO.: EX3700 FCC ID: PY314400298 RECEIVED: Nov. 17, 2014 TESTED: Dec. 17, 2014 to Jan. 06, 2015 ISSUED: Jan. 16, 2015 APPLICANT: NETGEAR, Inc. ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. Ltd., Taoyuan Branch Hsin Chu Laboratory TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA141117E18 Report Format Version 5.2.1 1 of 9 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN ...................................................................................................... 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 7 Report No.: SA141117E18 2 of 9 Report Format Version 5.2.1 RELEASE CONTROL RECORD ISSUE NO. SA141117E18 REASON FOR CHANGE Original release DATE ISSUED Jan. 16, 2015 Report No.: SA141117E18 3 of 9 Report Format Version 5.2.1 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY
(mW/cm2) AVERAGE TIME
(minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 1500-100,000 F = Frequency in MHz F/1500 1.0 30 30 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA141117E18 5 of 9 Report Format Version 5.2.1 5. ANTENNA GAIN The antennas provided to the EUT, please refer to the following table:
Ant. No. Brand Model Antenna R NETGEAR NA Antenna L NETGEAR NA Antenna Gain(dBi)
<including cable loss>
3.1 3 3.2 3.2 3.3 3.2 4 4 3.9 3.1 Frequency range
(GHz ~ GHz) Antenna Type Connecter Type Cable Length
(mm) 2.4~2.4835 5.15~5.25 5.25~5.35 5.47~5.725 5.725~5.85 2.4~2.4835 5.15~5.25 5.25~5.35 5.47~5.725 5.725~5.85 Dipole i-pex (MHF) 35 Dipole i-pex (MHF) 75 Report No.: SA141117E18 6 of 9 Report Format Version 5.2.1 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For 15.247(2.4GHz):
802.11b FREQUENCY CONDUCTED DISTANCE ANTENNA
(cm)
(MHz)
(MHz)
(MHz)
(MHz) POWER
(mW) 326.715 POWER
(mW) 616.958 POWER
(mW) 583.627 POWER
(mW) 419.89 2412 ~ 2462 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.16dBi 802.11g FREQUENCY CONDUCTED ANTENNA DISTANCE
(cm) 2412 ~ 2462 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.16dBi 802.11n (HT20) FREQUENCY CONDUCTED ANTENNA DISTANCE
(cm) 2412 ~ 2462 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.16dBi 802.11n (HT40) FREQUENCY CONDUCTED ANTENNA DISTANCE
(cm) 2422 ~ 2452 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.16dBi GAIN
(dBi) 6.16 GAIN
(dBi) 6.16 GAIN
(dBi) 6.16 GAIN
(dBi) 6.16 POWER DENSITY
(mW/cm2) 0.26847 POWER DENSITY
(mW/cm2) 0.50697 POWER DENSITY
(mW/cm2) 0.47958 POWER DENSITY
(mW/cm2) 0.34504 LIMIT
(mW/cm2) 1 LIMIT
(mW/cm2) 1 LIMIT
(mW/cm2) 1 LIMIT
(mW/cm2) 1 Report No.: SA141117E18 7 of 9 Report Format Version 5.2.1 For 15.407 (5GHz_U-NII-1):
802.11a FREQUENCY CONDUCTED
(MHz) POWER
(mW) 306.426 ANTENNA GAIN
(dBi) 6.52 DISTANCE
(cm) 5180 ~ 5240 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.52dBi 802.11ac (VHT20) FREQUENCY CONDUCTED ANTENNA
(MHz)
(MHz)
(MHz) POWER
(mW) 281.177 POWER
(mW) 135.02 POWER
(mW) 34.846 5180 ~ 5240 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.52dBi 802.11ac (VHT40) FREQUENCY CONDUCTED ANTENNA 5190 ~ 5230 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.52dBi 802.11ac (VHT80) FREQUENCY CONDUCTED ANTENNA 5210 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.52dBi GAIN
(dBi) 6.52 GAIN
(dBi) 6.52 GAIN
(dBi) 6.52 DISTANCE
(cm) DISTANCE
(cm) DISTANCE
(cm) POWER DENSITY
(mW/cm2) 0.27356 POWER DENSITY
(mW/cm2) 0.25102 POWER DENSITY
(mW/cm2) 0.12054 POWER DENSITY
(mW/cm2) 0.03111 LIMIT
(mW/cm2) 1 LIMIT
(mW/cm2) 1 LIMIT
(mW/cm2) 1 LIMIT
(mW/cm2) 1 Report No.: SA141117E18 8 of 9 Report Format Version 5.2.1 For 15.407 (5GHz_U-NII-3):
802.11a FREQUENCY CONDUCTED
(MHz) POWER
(mW) 292.567 ANTENNA GAIN
(dBi) 6.52 DISTANCE
(cm) 5745 ~ 5825 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.52dBi 802.11ac (VHT20) FREQUENCY CONDUCTED ANTENNA
(MHz)
(MHz)
(MHz) POWER
(mW) 281.355 POWER
(mW) 152.769 POWER
(mW) 45.764 5745 ~ 5825 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.52dBi 802.11ac (VHT40) FREQUENCY CONDUCTED ANTENNA 5755 ~ 5795 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.52dBi 802.11ac (VHT80) FREQUENCY CONDUCTED ANTENNA 5775 20 Note: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.52dBi GAIN
(dBi) 6.52 GAIN
(dBi) 6.52 GAIN
(dBi) 6.52 DISTANCE
(cm) DISTANCE
(cm) DISTANCE
(cm) POWER DENSITY
(mW/cm2) 0.24319 POWER DENSITY
(mW/cm2) 0.23387 POWER DENSITY
(mW/cm2) 0.12699 POWER DENSITY
(mW/cm2) 0.03804 LIMIT
(mW/cm2) 1 LIMIT
(mW/cm2) 1 LIMIT
(mW/cm2) 1 LIMIT
(mW/cm2) 1 CONCLUSION:
Both of the 2.4GHz and 5GHz WLAN can transmit simultaneously, the formula of calculated the MPE is:
CPD1 / LPD1 + CPD2 / LPD2 + etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.50697 / 1 + 0.27356 / 1 = 0.781, which is less than 1. This confirmed that the device comply with FCC 1.1310 MPE limit.
--- END ---
Report No.: SA141117E18 9 of 9 Report Format Version 5.2.1
1 2 3 | Test Report (Co-location) | Test Report | 545.72 KiB | January 29 2015 |
Supplemental Transmit Simultaneously Test Report REPORT NO.: RF141117E18-2 MODEL NO.: EX3700 FCC ID: PY314400298 RECEIVED: Nov. 17, 2014 TESTED: Nov. 18, 2014 to Jan. 06, 2015 ISSUED: Jan. 16, 2015 APPLICANT: NETGEAR, Inc. ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.:RF141117E18-2 1 of 28 Report Format Version 5.2.1 Table of Contents RELEASE CONTROL RECORD ......................................................................................................... 3 1. CERTIFICATION .................................................................................................................... 4 SUMMARY OF TEST RESULTS ............................................................................................ 5 2. MEASUREMENT UNCERTAINTY ......................................................................................... 6 2.1 GENERAL INFORMATION .................................................................................................... 7 3. 3.1 GENERAL DESCRIPTION OF EUT ....................................................................................... 7 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL ......................................... 9 3.2 DESCRIPTION OF SUPPORT UNITS ................................................................................. 11 3.3 3.4 CONFIGURATION OF SYSTEM UNDER TEST .................................................................. 12 TEST TYPES AND RESULTS .............................................................................................. 13 4. 4.1 CONDUCTED EMISSION MEASUREMENT ....................................................................... 13 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .................................................... 13 4.1.2 TEST INSTRUMENTS ......................................................................................................... 13 4.1.3 TEST PROCEDURES .......................................................................................................... 14 4.1.4 DEVIATION FROM TEST STANDARD ................................................................................ 14 4.1.5 TEST SETUP ....................................................................................................................... 15 4.1.6 EUT OPERATING CONDITIONS ......................................................................................... 15 4.1.7 TEST RESULTS ................................................................................................................... 16 4.2 RADIATED EMISSION MEASUREMENT ............................................................................ 18 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT ......................................................... 18 4.2.2 TEST INSTRUMENTS ......................................................................................................... 19 4.2.3 TEST PROCEDURES .......................................................................................................... 21 4.2.4 DEVIATION FROM TEST STANDARD ................................................................................ 21 4.2.5 TEST SETUP ....................................................................................................................... 22 4.2.6 EUT OPERATING CONDITIONS ......................................................................................... 22 4.2.7 TEST RESULTS ................................................................................................................... 23 4.3 CONDUCTED OUT-BAND EMISSION MEASUREMENT ................................................... 25 4.3.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT ................................ 25 4.3.2 TEST INSTRUMENTS ......................................................................................................... 25 4.3.3 TEST PROCEDURE ............................................................................................................ 25 4.3.4 DEVIATION FROM TEST STANDARD ................................................................................ 26 4.3.5 TEST SETUP ....................................................................................................................... 26 4.3.6 EUT OPERATING CONDITION ........................................................................................... 26 4.3.7 TEST RESULTS ................................................................................................................... 26 5. INFORMATION ON THE TESTING LABORATORIES ......................................................... 28 Report No.:RF141117E18-2 2 of 28 Report Format Version 5.2.1 RELEASE CONTROL RECORD ISSUE NO. RF141117E18-2 REASON FOR CHANGE Original release DATE ISSUED Jan. 16, 2015 Report No.:RF141117E18-2 3 of 28 Report Format Version 5.2.1 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247) STANDARD SECTION TEST TYPE RESULT REMARK 15.207 AC Power Conducted Emission PASS Radiated Emissions PASS 15.205 15.209 15.247(d) Meet the requirement of limit. Minimum passing margin is
-13.43dB at 0.30987MHz Meet the requirement of limit. Minimum passing margin is
-0.3dB at 7311.00MHz Report No.:RF141117E18-2 5 of 28 Report Format Version 5.2.1 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz -6GHz) Radiated emissions (6GHz -18GHz) Radiated emissions (18GHz -40GHz) Value 2.86 dB 5.43 dB 3.65 dB 3.88 dB 4.11 dB Report No.:RF141117E18-2 6 of 28 Report Format Version 5.2.1 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT MODEL NO. POWER SUPPLY MODULATION TYPE AC750 WiFi Range Extender EX3700 100-250Vac, 0.14A, 50-60Hz CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode MODULATION TECHNOLOGY DSSS,OFDM TRANSFER RATE OPERATING FREQUENCY NUMBER OF CHANNEL MAXIMUM OUTPUT POWER 802.11b: up to 11Mbps 802.11a / g: up to 54Mbps 802.11n: up to 300Mbps 802.11ac: up to 866.7Mbps For 15.407 5.18 ~ 5.24GHz, 5.745 ~ 5.825GHz For 15.247 2.412 ~ 2.462GHz For 15.407 9 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 4 for 802.11n (HT40), 802.11ac (VHT40) 2 for 802.11ac (VHT80) For 15.247 11 for 802.11b, 802.11g, 802.11n (HT20) 7 for 802.11n (HT40) For 15.407 802.11a: 306.426mW 802.11ac (VHT20): 281.355mW 802.11ac (VHT40): 152.769mW 802.11ac (VHT80): 45.764mW For 15.247 802.11b: 326.715mW 802.11g: 616.958mW 802.11n (HT20): 583.627mW 802.11n (HT40): 419.89mW Report No.:RF141117E18-2 7 of 28 Report Format Version 5.2.1 Please see NOTE NA Refer to users manual ANTENNA TYPE DATA CABLE I/O PORTS ASSOCIATED DEVICES NA NOTE:
1. 2.4GHz and 5GHz technology can transmit at same time. 2. The antennas provided to the EUT, please refer to the following table:
Antenna Gain(dBi)
<including cable Ant. No. Brand Model NA Antenna R NETGEAR loss>
3.1 3 3.2 3.2 3.3 3.2 4 4 3.9 3.1 3. The EUT incorporates a MIMO function. Antenna L NETGEAR NA Frequency range
(GHz ~ GHz) Antenna Type Connecter Type Cable Length
(mm) 2.4~2.4835 5.15~5.25 5.25~5.35 5.47~5.725 5.725~5.85 2.4~2.4835 5.15~5.25 5.25~5.35 5.47~5.725 5.725~5.85 Dipole i-pex (MHF) 35 Dipole i-pex (MHF) 75 MODULATION MODE DATA RATE (MCS) For 2.4GHz Band 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) 802.11a 802.11n (HT20) 802.11n (HT40) 802.11ac (VHT20) 802.11ac (VHT40) 802.11ac (VHT80)
&
&
&
1 ~ 11Mbps 6 ~ 54Mbps MCS 0~7 MCS 8~15 For 5GHz Band TX & RX CONFIGURATION 2RX 2TX 2TX 2RX 2RX 2TX 2TX 2RX 6 ~ 54Mbps MCS 0~7 MCS 8~15 MCS0~8 Nss= 1 MCS0~8 Nss= 2 MCS0~9 Nss= 1 MCS0~9 Nss= 2 2TX 2TX 2TX 2TX 2TX 2TX 2TX 2RX 2RX 2RX 2RX 2RX 2RX 2RX 4. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.:RF141117E18-2 8 of 28 Report Format Version 5.2.1 3.2 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL EUT CONFIGURE MODE
-
PLC APPLICABLE TO RE < 1G RE 1G OB DESCRIPTION
-
Where PLC: Power Line Conducted Emission RE 1G: Radiated Emission above 1GHz RE < 1G: Radiated Emission below 1GHz OB: Conducted Out-Band Emission Measurement NOTE: 1. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane (for below 1GHz) and Y-plane (for above 1GHz). POWER LINE CONDUCTED EMISSION TEST:
Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE 1 to 11 36 to 48 6 48 TYPE BPSK OFDM OFDM BPSK
(Mbps) 6 6 RADIATED EMISSION TEST:
Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE 1 to 11 36 to 48 6 48 TYPE BPSK OFDM OFDM BPSK
(Mbps) 6 6 MODE 2.4 GHz 802.11g
+
5 GHz 802.11a MODE 2.4 GHz 802.11g
+
5 GHz 802.11a Report No.:RF141117E18-2 9 of 28 Report Format Version 5.2.1 CONDUCTED OUT-BAND EMISSION MEASUREMENT:
Following channel(s) was (were) selected for the final test as listed below. MODE 2.4 GHz 802.11g
+
5 GHz 802.11a AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE 1 to 11 36 to 48 6 48 TYPE BPSK OFDM OFDM BPSK
(Mbps) 6 6 TEST CONDITION:
APPLICABLE TO PLC RE<1G RE1G OB ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY 25deg. C, 60%RH 25deg. C, 74%RH 22deg. C, 67%RH 25deg. C, 60%RH 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz Wythe Lin Gary Cheng Andy Ho Gary Cheng Report No.:RF141117E18-2 10 of 28 Report Format Version 5.2.1 3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. A Product NOTEBOOK COMPUTER Brand Model No. Serial No. FCC ID Remark DELL PP32LA HSLB32S FCC DoC Provided by Lab NOTE:
1. All power cords of the above support units are non-shielded (1.8 m). No. Length (m) Cable Qty. Shielded
(Yes/ No) 1 RJ45 1 10 No NOTE:
Cores
(Number) 0 Remark Provided by Lab Report No.:RF141117E18-2 11 of 28 Report Format Version 5.2.1 EUT 3.4 CONFIGURATION OF SYSTEM UNDER TEST Remote site LAN 1 NOTEBOOK COMPUTER (A) Report No.:RF141117E18-2 12 of 28 Report Format Version 5.2.1 4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) 0.15-0.5 0.5-5 5-30 Quasi-peak CONDUCTED LIMIT (dBV) Average 56 to 46 66 to 56 56 60 46 50 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 4.1.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Test Receiver ROHDE & SCHWARZ Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral) ROHDE & SCHWARZ RF Cable
(JYEBAO) 50 ohms Terminator 50 ohms Terminator Software ADT Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL ESCS 30 100375 Apr. 29, 2014 Apr. 28, 2015 NSLK-8127 8127-522 Sep. 15, 2014 Sep. 14, 2015 ENV216 100071 Nov. 10, 2014 Nov. 09, 2015 5DFB COCCAB-001 Mar. 10 , 2014 Mar. 09, 2015 N/A N/A BV ADT_Cond_V7.3.7. 3 EMC-03 EMC-02 Sep. 22, 2014 Sep. 21, 2015 Sep. 30, 2014 Sep. 29, 2015 NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: Nov. 28, 2014 Report No.:RF141117E18-2 13 of 28 Report Format Version 5.2.1 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. b. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. c. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. d. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. NOTE:
1. The resolution bandwidth of test receiver is 9kHz for Quasi-peak detection (QP) & Average detection (AV). 4.1.4 DEVIATION FROM TEST STANDARD No deviation Report No.:RF141117E18-2 14 of 28 Report Format Version 5.2.1 4.1.5 TEST SETUP For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit A (Notebook Computer) which is placed in remote site. 2. The communication partner run test program QATool.exe to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.:RF141117E18-2 15 of 28 Report Format Version 5.2.1 4.1.7 TEST RESULTS PHASE No 1 2 3 4 5 6 Freq.
[MHz]
0.15120 0.32526 0.84489 4.91154 10.79148 21.66148 REMARKS:
Line (L) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 0.07 44.26 36.56 0.08 23.59 0.12 34.23 0.28 0.47 30.62 36.62 0.73 44.19 36.46 36.48 33.74 23.47 19.95 33.95 25.21 30.15 28.79 35.89 34.78 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 36.53 65.93 59.57 33.82 56.00 20.07 56.00 25.49 29.26 60.00 60.00 35.51 AV. Q.P. AV. 55.93
-19.41
-15.75 49.57
-25.93 46.00
-20.51 46.00 50.00
-20.74
-14.49 50.00
-21.68
-23.01
-32.41
-21.77
-29.38
-23.38 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.:RF141117E18-2 16 of 28 Report Format Version 5.2.1 PHASE Neutral (N) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 45.80 0.06 39.70 0.08 23.54 0.13 0.29 34.27 28.73 0.56 0.78 37.42 45.74 37.98 39.62 36.47 23.41 19.14 33.98 25.42 28.17 25.45 36.64 34.79 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 65.59 38.04 59.97 36.55 56.00 19.27 25.71 56.00 60.00 26.01 35.57 60.00 AV. Q.P. AV.
-17.54 55.59
-13.43 49.97
-26.73 46.00 46.00
-20.29
-23.99 50.00 50.00
-14.43
-19.78
-20.28
-32.46
-21.73
-31.27
-22.58 No 1 2 3 4 5 6 Freq.
[MHz]
0.15765 0.30987 0.93125 4.91852 13.35654 21.66784 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.:RF141117E18-2 17 of 28 Report Format Version 5.2.1 4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
Frequencies
(MHz) Field strength
(microvolts/meter) Measurement distance
(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.:RF141117E18-2 18 of 28 Report Format Version 5.2.1 4.2.2 TEST INSTRUMENTS For Below 1GHz:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY50010156 Aug. 11, 2014 Aug. 10, 2015 ZFL-1000VH2 B AMP-ZFL-04 Nov. 12, 2014 Nov. 11, 2015 VULB 9168 9168-361 Feb. 27, 2014 Feb. 26, 2015 NA CHHCAB_001 Oct. 05, 2014 Oct. 04, 2015 AIH.8018 0000220091110 Aug. 26, 2014 Aug. 25, 2015 8449B 300801923 Oct. 28, 2014 Oct. 27, 2015 RF Cable NA 131206 131215 SNMY23685/4 Jan. 17, 2014 Jan. 16, 2015 Spectrum Analyzer R&S Pre-Amplifier EMCI Horn_Antenna SCHWARZBECK RF Cable Software Antenna Tower & Turn Table CT NA Note:
FSV40 100964 July 05, 2014 July 04, 2015 EMC184045 980143 Jan. 17, 2014 Jan. 16, 2015 BBHA 9170 9170-424 Aug. 26, 2014 Aug. 25, 2015 NA ADT_Radiated _V8.7.07 RF104-121 RF104-204 NA NA Dec. 12, 2013 Dec. 11, 2014 NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: Nov. 18, 2014 Report No.:RF141117E18-2 19 of 28 Report Format Version 5.2.1 For Above 1GHz:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY51210105 July 21,2014 July 20,2015 ZFL-1000VH2 B AMP-ZFL-03 Nov. 12, 2014 Nov. 11, 2015 VULB 9168 9168-360 Feb. 26, 2014 Feb. 25, 2015 NA CHGCAB_001 Oct. 04, 2014 Oct. 03, 2015 AIH.8018 0000320091110 Aug. 27, 2014 Aug. 26, 2015 8449B 3008A02578 June 24, 2014 June 23, 2015 RF Cable NA 131205 131214 SNMY23684/4 Jan. 17, 2014 Jan. 16, 2015 Spectrum Analyzer R&S Pre-Amplifier EMCI Horn_Antenna SCHWARZBECK RF Cable Antenna Tower & Turn Table CT Note:
FSV40 100964 July 05, 2014 July 04, 2015 EMC184045 980143 Jan. 17, 2014 Jan. 16, 2015 BBHA 9170 9170-424 Aug. 26, 2014 Aug. 25, 2015 NA NA RF104-121 RF104-204 Dec. 11, 2014 Dec. 10, 2015 NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. G. 4. The FCC Site Registration No. is 966073. 5 The VCCI Site Registration No. is G-137. 6 The CANADA Site Registration No. is IC 7450H-2. 7 Tested Date: Jan. 06, 2015 Report No.:RF141117E18-2 20 of 28 Report Format Version 5.2.1 4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average (Duty cycle < 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). 4. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (Duty cycle 98%) for Average detection (AV) at frequency above 1GHz. 5. All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.:RF141117E18-2 21 of 28 Report Format Version 5.2.1 4.2.5 TEST SETUP
<Frequency Range below 1GHz>
EUT&
Support Units 80cm 3m 10m Turn Table Ground Plane Test Receiver Ant. Tower 1-4m Variable
<Frequency Range above 1GHz>
EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.:RF141117E18-2 22 of 28 Report Format Version 5.2.1 4.2.7 TEST RESULTS BELOW 1GHz DATA FREQUENCY RANGE Below 1GHz DETECTOR FUNCTION Quasi-Peak (QP) NO. 1 2 3 4 5 6 FREQ.
(MHz) 101.86 148.10 161.84 249.93 913.52 927.12 NO. FREQ.
(MHz) 1 2 3 4 5 6 34.75 51.85 58.70 106.73 912.92 956.85 REMARKS:
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT 224 267 157 206 233 247 TABLE ANGLE
(Degree) 43.5 43.5 43.5 46.0 46.0 46.0
-14.0
-12.6
-16.4
-15.3
-8.2
-9.8
(m) 4.00 H 1.50 H 2.00 H 2.00 H 1.56 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 29.5 QP 46.62 30.9 QP 43.80 27.1 QP 40.17 30.8 QP 44.66 37.8 QP 37.27 36.3 QP 35.42 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 48.98 48.82 48.51 46.70 35.72 34.52 LEVEL
(dBuV/m) 34.7 QP 35.4 QP 34.8 QP 30.3 QP 36.3 QP 35.7 QP
(m) 1.05 V 1.64 V 1.00 V 1.03 V 1.00 V 1.02 V
-5.4
-4.6
-5.2
-13.2
-9.7
-10.3 40.0 40.0 40.0 43.5 46.0 46.0 TABLE ANGLE
(Degree) 169 102 221 109 226 253 ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-17.16
-12.93
-13.11
-13.91 0.55 0.83 CORRECTION FACTOR
(dB/m)
-14.33
-13.39
-13.70
-16.38 0.54 1.17 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.:RF141117E18-2 23 of 28 Report Format Version 5.2.1 ABOVE 1GHz DATA FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 4874.00 4874.00 7311.00 7311.00
#10480.00
#10480.00 15720.00 15720.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 4874.00 4874.00 7311.00 7311.00
#10480.00
#10480.00 15720.00 15720.00 REMARKS:
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 280 280 15 15 326 326 48 48 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0
-11.0
-10.8
-14.7
-7.3
-17.9
-10.3
-11.4
-3.8
(m) 1.13 H 1.13 H 1.06 H 1.06 H 1.03 H 1.03 H 1.25 H 1.25 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 63.0 PK 57.51 43.2 AV 37.71 59.3 PK 46.60 46.7 AV 34.00 56.1 PK 43.53 43.7 AV 31.13 62.6 PK 44.98 50.2 AV 32.58 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 58.41 38.51 52.70 41.00 47.63 34.33 47.28 33.48 LEVEL
(dBuV/m) 63.9 PK 44.0 AV 65.4 PK 53.7 AV 60.2 PK 46.9 AV 64.9 PK 51.1 AV
(m) 1.09 V 1.09 V 1.35 V 1.35 V 1.27 V 1.27 V 1.02 V 1.02 V
-10.1
-10.0
-8.6
-0.3
-13.8
-7.1
-9.1
-2.9 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0 350 350 332 332 322 322 360 360 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 5.49 5.49 12.70 12.70 12.57 12.57 17.62 17.62 CORRECTION FACTOR
(dB/m) 5.49 5.49 12.70 12.70 12.57 12.57 17.62 17.62 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " # ": The radiated frequency is out of the restricted band. Report No.:RF141117E18-2 24 of 28 Report Format Version 5.2.1 4.3 CONDUCTED OUT-BAND EMISSION MEASUREMENT LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT 4.3.1 Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.3.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP 40 100060 May 08, 2014 May 07, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : Dec. 12, 2014 4.3.3 Measurement Procedure - Reference Level TEST PROCEDURE 1. Set the RBW = 100 kHz. 2. Set the VBW 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Measurement Procedure Unwanted Emission Level 1. Set RBW = 100 kHz. 2. Set VBW 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. Report No.:RF141117E18-2 25 of 28 Report Format Version 5.2.1 TEST SETUP 4.3.4 DEVIATION FROM TEST STANDARD No deviation 4.3.5 4.3.6 EUT OPERATING CONDITION Attenuator EUT SPECTRUM ANALYZER The software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel frequencies individually. 4.3.7 The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. TEST RESULTS Report No.:RF141117E18-2 26 of 28 Report Format Version 5.2.1 2.4 GHz 802.11g channel 6 & 5GHz 802.11a channel 48 Chain(0) Chain(1) Report No.:RF141117E18-2 27 of 28 Report Format Version 5.2.1 5. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab:
Tel: 886-2-26052180 Fax: 886-2-26052943 Hwa Ya EMC/RF/Safety Lab:
Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF/Telecom Lab:
Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also.
---END---
Report No.:RF141117E18-2 28 of 28 Report Format Version 5.2.1
1 2 3 | Test Report (DTS) rev | Test Report | 2.01 MiB | January 29 2015 |
FCC TEST REPORT (15.247) REPORT NO.: RF141117E18 MODEL NO.: EX3700 FCC ID: PY314400298 RECEIVED: Nov. 17, 2014 TESTED: Nov. 18, 2014 to Jan. 06, 2015 ISSUED: Jan. 16, 2015 APPLICANT: NETGEAR, Inc. ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF141117E18 1 of 67 Report Format Version 5.2.1 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 4 1. CERTIFICATION ...................................................................................................... 5 2. SUMMARY OF TEST RESULTS .............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 7 GENERAL INFORMATION ....................................................................................... 8 3. 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 8 3.2 DESCRIPTION OF TEST MODES ......................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 14 DUTY CYCLE OF TEST SIGNAL ........................................................................... 15 3.4 DESCRIPTION OF SUPPORT UNITS ................................................................... 16 3.5 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 17 3.6 4. TEST TYPES AND RESULTS ................................................................................ 18 4.1 CONDUCTED EMISSION MEASUREMENT ......................................................... 18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 18 4.1.2 TEST INSTRUMENTS ........................................................................................... 18 4.1.3 TEST PROCEDURES ............................................................................................ 19 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 19 4.1.5 TEST SETUP ......................................................................................................... 19 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 20 4.1.7 TEST RESULTS ..................................................................................................... 21 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 23 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 23 4.2.2 TEST INSTRUMENTS ........................................................................................... 24 4.2.3 TEST PROCEDURES ............................................................................................ 26 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 26 4.2.5 TEST SETUP ......................................................................................................... 27 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 27 4.2.7 TEST RESULTS ..................................................................................................... 28 4.3 6DB BANDWIDTH MEASUREMENT ..................................................................... 41 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT .................................................. 41 4.3.2 TEST INSTRUMENTS ........................................................................................... 41 4.3.3 TEST PROCEDURE .............................................................................................. 41 4.3.4 DEVIATION FROM TEST STANDARD .................................................................. 41 4.3.5 TEST SETUP ......................................................................................................... 41 4.3.6 EUT OPERATING CONDITIONS ........................................................................... 41 4.3.7 TEST RESULTS ..................................................................................................... 42 4.4 OCCUPIED BANDWIDTH MEASUREMENT ......................................................... 44 4.4.1 TEST INSTRUMENTS ........................................................................................... 44 4.4.2 TEST PROCEDURE .............................................................................................. 44 4.4.3 DEVIATION FROM TEST STANDARD .................................................................. 44 4.4.4 TEST SETUP ......................................................................................................... 44 4.4.5 EUT OPERATING CONDITIONS ........................................................................... 44 4.4.6 TEST RESULTS ..................................................................................................... 45 4.5 CONDUCTED OUTPUT POWER MEASUREMENT ............................................. 47 4.5.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ........................... 47 4.5.2 TEST INSTRUMENTS ........................................................................................... 47 4.5.3 TEST PROCEDURES ............................................................................................ 47 4.5.4 DEVIATION FROM TEST STANDARD .................................................................. 48 4.5.5 TEST SETUP ......................................................................................................... 48 4.5.6 EUT OPERATING CONDITIONS ........................................................................... 48 Report No.: RF141117E18 2 of 67 Report Format Version 5.2.1 4.5.7 TEST RESULTS ..................................................................................................... 49 4.6 POWER SPECTRAL DENSITY MEASUREMENT ................................................. 51 4.6.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT .............................. 51 4.6.2 TEST INSTRUMENTS ........................................................................................... 51 4.6.3 TEST PROCEDURE .............................................................................................. 51 4.6.4 DEVIATION FROM TEST STANDARD .................................................................. 51 4.6.5 TEST SETUP ......................................................................................................... 51 4.6.6 EUT OPERATING CONDITION ............................................................................. 51 4.6.7 TEST RESULTS ..................................................................................................... 52 4.7 CONDUCTED OUT-BAND EMISSION MEASUREMENT...................................... 55 4.7.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT ................... 55 4.7.2 TEST INSTRUMENTS ........................................................................................... 55 4.7.3 TEST PROCEDURE .............................................................................................. 55 4.7.4 DEVIATION FROM TEST STANDARD .................................................................. 56 4.7.5 TEST SETUP ......................................................................................................... 56 4.7.6 EUT OPERATING CONDITION ............................................................................. 56 4.7.7 TEST RESULTS ..................................................................................................... 56 PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................. 65 5. 6. INFORMATION ON THE TESTING LABORATORIES ........................................... 66 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO 7. THE EUT BY THE LAB ........................................................................................... 67 Report No.: RF141117E18 3 of 67 Report Format Version 5.2.1 RELEASE CONTROL RECORD ISSUE NO. RF141117E18 REASON FOR CHANGE Original release DATE ISSUED Jan. 16, 2015 Report No.: RF141117E18 4 of 67 Report Format Version 5.2.1 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247) STANDARD SECTION TEST TYPE RESULT REMARK 15.207 AC Power Conducted Emission PASS Radiated Emissions & Band Edge Measurement 15.205 15.209 15.247(d) 15.247(d) 15.247(a)(2) 6dB bandwidth 15.247(b) 15.247(e) Conducted Output power Power Spectral Density Antenna Port Emission 15.203 Antenna Requirement PASS PASS PASS PASS PASS PASS Meet the requirement of limit. Minimum passing margin is
-14.22dB at 21.66406MHz Meet the requirement of limit. Minimum passing margin is
-0.1dB at 4824.00MHz Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Antenna connector is i-pex
(MHF) not a standard connector. NOTE: The EUT was operating in 2400 ~ 2483.5MHz, 5.15~5.25GHz and 5.725~5.850GHz frequencies band. This report was recorded the RF parameters including 2400 ~
2483.5MHz. For the 5.15~5.25GHz and 5.725~5.850GHz RF parameters was recorded in another test report. Report No.: RF141117E18 6 of 67 Report Format Version 5.2.1 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz -6GHz) Radiated emissions (6GHz -18GHz) Radiated emissions (18GHz -40GHz) Value 2.86 dB 5.43 dB 3.65 dB 3.88 dB 4.11 dB Report No.: RF141117E18 7 of 67 Report Format Version 5.2.1 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT MODEL NO. POWER SUPPLY MODULATION TYPE AC750 WiFi Range Extender EX3700 100-250Vac, 0.14A, 50-60Hz CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode only MODULATION TECHNOLOGY DSSS,OFDM TRANSFER RATE OPERATING FREQUENCY NUMBER OF CHANNEL MAXIMUM OUTPUT POWER 802.11b: up to 11Mbps 802.11a / g: up to 54Mbps 802.11n: up to 300Mbps 802.11ac: up to 866.7Mbps For 15.407 5.18 ~ 5.24GHz, 5.745 ~ 5.825GHz For 15.247 2.412 ~ 2.462GHz For 15.407 9 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 4 for 802.11n (HT40), 802.11ac (VHT40) 2 for 802.11ac (VHT80) For 15.247 11 for 802.11b, 802.11g, 802.11n (HT20) 7 for 802.11n (HT40) For 15.407 802.11a: 306.426mW 802.11ac (VHT20): 281.355mW 802.11ac (VHT40): 152.769mW 802.11ac (VHT80): 45.764mW For 15.247 802.11b: 326.715mW 802.11g: 616.958mW 802.11n (HT20): 583.627mW 802.11n (HT40): 419.89mW Report No.: RF141117E18 8 of 67 Report Format Version 5.2.1 Please see NOTE NA Refer to users manual ANTENNA TYPE DATA CABLE I/O PORTS ASSOCIATED DEVICES NA NOTE:
1. 2.4GHz and 5GHz technology can transmit at same time. 2. The antennas provided to the EUT, please refer to the following table:
Antenna Gain(dBi)
<including cable Ant. No. Brand Model NA Antenna R NETGEAR loss>
3.1 3 3.2 3.2 3.3 3.2 4 4 3.9 3.1 3. The EUT incorporates a MIMO function. Antenna L NETGEAR NA Frequency range
(GHz ~ GHz) Antenna Type Connecter Type Cable Length
(mm) 2.4~2.4835 5.15~5.25 5.25~5.35 5.47~5.725 5.725~5.85 2.4~2.4835 5.15~5.25 5.25~5.35 5.47~5.725 5.725~5.85 Dipole i-pex (MHF) 35 Dipole i-pex (MHF) 75 MODULATION MODE DATA RATE (MCS) For 2.4GHz Band 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) 802.11a 802.11n (HT20) 802.11n (HT40) 802.11ac (VHT20) 802.11ac (VHT40) 802.11ac (VHT80)
&
&
&
1 ~ 11Mbps 6 ~ 54Mbps MCS 0~7 MCS 8~15 For 5GHz Band TX & RX CONFIGURATION 2RX 2TX 2RX 2TX 2TX 2RX 2RX 2TX 6 ~ 54Mbps MCS 0~7 MCS 8~15 MCS0~8 Nss= 1 MCS0~8 Nss= 2 MCS0~9 Nss= 1 MCS0~9 Nss= 2 2TX 2TX 2TX 2TX 2TX 2TX 2TX 2RX 2RX 2RX 2RX 2RX 2RX 2RX Note: The modulation and bandwidth are similar for 802.11n mode for 20MHz (40MHz) and 802.11ac mode for 20MHz (40MHz), therefore investigated worst case to representative mode in test report. (Final test mode refer section 3.2.1) 4. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF141117E18 9 of 67 Report Format Version 5.2.1 3.2 DESCRIPTION OF TEST MODES Operated in 2400 ~ 2483.5MHz band:
11 channels are provided for 802.11b, 802.11g, 802.11n (HT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 1 2 3 4 5 6 2412MHz 2417MHz 2422MHz 2427MHz 2432MHz 2437MHz 7 8 9 10 11 2442MHz 2447MHz 2452MHz 2457MHz 2462MHz 7 channels are provided for 802.11n (HT40):
CHANNEL FREQUENCY CHANNEL FREQUENCY 3 4 5 6 2422MHz 2427MHz 2432MHz 2437MHz 7 8 9 2442MHz 2447MHz 2452MHz Report No.: RF141117E18 10 of 67 Report Format Version 5.2.1 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT CONFIGURE MODE APPLICABLE TO PLC RE < 1G RE 1G APCM
-
OB DESCRIPTION
-
Where PLC: Power Line Conducted Emission RE 1G: Radiated Emission above 1GHz OB: Conducted Out-Band Emission Measurement RE < 1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement NOTE: 1. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane (for below 1GHz) and Y-plane (for above 1GHz). NOTE: 2. For 5GHz: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane . POWER LINE CONDUCTED EMISSION TEST:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11g AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 1 to 11 6 OFDM MODULATION DATA RATE TYPE BPSK
(Mbps) 6 RADIATED EMISSION TEST (BELOW 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11g AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 1 to 11 6 OFDM MODULATION DATA RATE TYPE BPSK
(Mbps) 6 Report No.: RF141117E18 11 of 67 Report Format Version 5.2.1 RADIATED EMISSION TEST (ABOVE 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) AVAILABLE CHANNEL 1 to 11 1 to 11 1 to 11 3 to 9 TESTED CHANNEL 1, 6, 11 1, 6, 11 1, 6, 11 3, 6, 9 MODULATION TECHNOLOGY DSSS OFDM OFDM OFDM MODULATION DATA RATE TYPE DBPSK BPSK BPSK BPSK
(Mbps) 1 6 6.5 13.5 ANTENNA PORT CONDUCTED MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) AVAILABLE CHANNEL 1 to 11 1 to 11 1 to 11 3 to 9 TESTED CHANNEL 1, 6, 11 1, 6, 11 1, 6, 11 3, 6, 9 MODULATION TECHNOLOGY DSSS OFDM OFDM OFDM MODULATION DATA RATE TYPE DBPSK BPSK BPSK BPSK
(Mbps) 1 6 6.5 13.5 CONDUCTED OUT-BAND EMISSION MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) AVAILABLE CHANNEL 1 to 11 1 to 11 1 to 11 3 to 9 TESTED CHANNEL 1, 6, 11 1, 6, 11 1, 6, 11 3, 6, 9 MODULATION TECHNOLOGY DSSS OFDM OFDM OFDM MODULATION DATA RATE TYPE DBPSK BPSK BPSK BPSK
(Mbps) 1 6 6.5 13.5 Report No.: RF141117E18 12 of 67 Report Format Version 5.2.1 TEST CONDITION:
APPLICABLE TO PLC RE<1G RE1G APCM OB ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY 24deg. C, 71%RH 25deg. C, 74%RH 23deg. C, 68%RH 25deg. C, 60%RH 25deg. C, 60%RH 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz Wythe Lin Gary Cheng Gary Cheng Anderson Chen Anderson Chen Report No.: RF141117E18 13 of 67 Report Format Version 5.2.1 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v03r02 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. () Report No.: RF141117E18 14 of 67 Report Format Version 5.2.1 3.4 DUTY CYCLE OF TEST SIGNAL Duty cycle of test signal is 100 %, duty factor is not required. 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) Report No.: RF141117E18 15 of 67 Report Format Version 5.2.1 3.5 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product A NOTEBOOK COMPUTER NOTE:
1. All power cords of the above support units are non-shielded (1.8 m). 2. Items B-C acted as communication partners to transfer data. No. FCC DoC Provided by Lab Model No. Serial No. HSLB32S Remark Remark PP32LA FCC ID Brand Cable DELL Qty. Length (m) Shielded
(Yes/ No) Cores
(Number) RJ45 1 NOTE:
1. The core(s) is(are) originally attached to the cable(s). 10 1 No 0 Provided by Lab Report No.: RF141117E18 16 of 67 Report Format Version 5.2.1 3.6 CONFIGURATION OF SYSTEM UNDER TEST Remote site EUT LAN 1 NOTEBOOK COMPUTER (A) Report No.: RF141117E18 17 of 67 Report Format Version 5.2.1 4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) 0.15-0.5 0.5-5 5-30 Quasi-peak CONDUCTED LIMIT (dBV) Average 56 to 46 66 to 56 56 60 46 50 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 4.1.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Test Receiver ROHDE & SCHWARZ Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral) ROHDE & SCHWARZ RF Cable
(JYEBAO) 50 ohms Terminator 50 ohms Terminator Software ADT Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL ESCS 30 100375 Apr. 29, 2014 Apr. 28, 2015 NSLK-8127 8127-522 Sep. 15, 2014 Sep. 14, 2015 ENV216 100071 Nov. 10, 2014 Nov. 09, 2015 5DFB COCCAB-001 Mar. 10, 2014 Mar. 09, 2015 N/A N/A BV ADT_Cond_V7.3.7. 3 EMC-03 EMC-02 Sep. 22, 2014 Sep. 21, 2015 Sep. 30, 2014 Sep. 29, 2015 NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: Nov. 28, 2014 Report No.: RF141117E18 18 of 67 Report Format Version 5.2.1 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. b. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. c. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. d. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. NOTE:
1. The resolution bandwidth of test receiver is 9kHz for Quasi-peak detection (QP) & Average detection (AV). 4.1.4 DEVIATION FROM TEST STANDARD No deviation 4.1.5 TEST SETUP For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: RF141117E18 19 of 67 Report Format Version 5.2.1 4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit A (Notebook Computer) which is placed in remote site. 2. The communication partner run test program QATool.exe to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF141117E18 20 of 67 Report Format Version 5.2.1 4.1.7 TEST RESULTS PHASE No 1 2 3 4 5 6 Freq.
[MHz]
0.15000 0.34141 0.92734 4.82813 10.79297 21.66406 REMARKS:
Line (L) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 47.46 0.07 0.08 33.27 24.14 0.13 32.12 0.28 31.01 0.47 0.73 36.65 47.39 39.07 33.19 29.99 24.01 20.27 31.84 24.19 30.54 28.51 35.92 34.76 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 66.00 39.14 30.07 59.17 56.00 20.40 56.00 24.47 60.00 28.98 35.49 60.00 AV. Q.P. AV.
-16.86 56.00 49.17
-19.09
-25.60 46.00
-21.53 46.00
-21.02 50.00 50.00
-14.51
-18.54
-25.89
-31.86
-23.88
-28.99
-23.35 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF141117E18 21 of 67 Report Format Version 5.2.1 PHASE Neutral (N) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 0.07 48.46 39.41 0.08 25.46 0.12 22.43 0.23 0.29 33.53 36.99 0.78 48.39 39.76 39.33 34.63 25.34 21.41 22.20 15.77 33.24 24.83 36.21 35.00 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 39.83 66.00 60.07 34.71 56.00 21.53 56.00 16.00 25.12 60.00 60.00 35.78 AV. Q.P. AV. 56.00
-16.17
-15.37 50.07
-24.47 46.00
-30.00 46.00 50.00
-24.88
-14.22 50.00
-17.54
-20.67
-30.54
-33.57
-26.47
-23.01 No 1 2 3 4 5 6 Freq.
[MHz]
0.15000 0.30625 0.87266 3.19531 5.00781 21.66406 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF141117E18 22 of 67 Report Format Version 5.2.1 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
Frequencies
(MHz) Field strength
(microvolts/meter) Measurement distance
(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation Report No.: RF141117E18 23 of 67 Report Format Version 5.2.1 4.2.2 TEST INSTRUMENTS For Below 1GHz:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY50010156 Aug. 11, 2014 Aug. 10, 2015 ZFL-1000VH2 B AMP-ZFL-04 Nov. 12, 2014 Nov. 11, 2015 VULB 9168 9168-361 Feb. 27, 2014 Feb. 26, 2015 NA CHHCAB_001 Oct. 05, 2014 Oct. 04, 2015 AIH.8018 0000220091110 Aug. 26, 2014 Aug. 25, 2015 8449B 300801923 Oct. 28, 2014 Oct. 27, 2015 RF Cable NA 131206 131215 SNMY23685/4 Jan. 17, 2014 Jan. 16, 2015 Spectrum Analyzer R&S Pre-Amplifier EMCI Horn_Antenna SCHWARZBECK RF Cable Software Antenna Tower & Turn Table CT NA Note:
FSV40 100964 July 05, 2014 July 04, 2015 EMC184045 980143 Jan. 17, 2014 Jan. 16, 2015 BBHA 9170 9170-424 Aug. 26, 2014 Aug. 25, 2015 NA ADT_Radiated _V8.7.07 RF104-121 RF104-204 NA NA Dec. 12, 2013 Dec. 11, 2014 NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: Nov. 18, 2014 Report No.: RF141117E18 24 of 67 Report Format Version 5.2.1 For Above 1GHz:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY51210105 July 21, 2014 July 20, 2015 ZFL-1000VH2 B AMP-ZFL-03 Nov. 12, 2014 Nov. 11, 2015 VULB 9168 9168-360 Feb. 26, 2014 Feb. 25, 2015 NA CHGCAB_001 Oct. 04, 2014 Oct. 03, 2015 AIH.8018 0000320091110 Aug. 27, 2014 Aug. 26, 2015 8449B 3008A02578 June 24, 2014 June 23, 2015 RF Cable NA 131205 131214 SNMY23684/4 Jan. 17, 2014 Jan. 16, 2015 Spectrum Analyzer R&S Pre-Amplifier EMCI Horn_Antenna SCHWARZBECK RF Cable Antenna Tower & Turn Table CT Note:
FSV40 100964 July 05, 2014 July 04, 2015 EMC184045 980143 Jan. 17, 2014 Jan. 16, 2015 BBHA 9170 9170-424 Aug. 26, 2014 Aug. 25, 2015 NA NA RF104-121 RF104-204 Dec. 11, 2014 Dec. 10, 2015 NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. G. 4. The FCC Site Registration No. is 966073. 5 The VCCI Site Registration No. is G-137. 6 The CANADA Site Registration No. is IC 7450H-2. 7 Tested Date: Jan. 05, 2015 Report No.: RF141117E18 25 of 67 Report Format Version 5.2.1 4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average (Duty cycle < 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). 4. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (Duty cycle 98%) for Average detection (AV) at frequency above 1GHz. 5. All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF141117E18 26 of 67 Report Format Version 5.2.1 4.2.5 TEST SETUP
<Frequency Range below 1GHz>
EUT&
Support Units 80cm 3m 10m Turn Table Ground Plane Test Receiver Ant. Tower 1-4m Variable
<Frequency Range above 1GHz>
EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: RF141117E18 27 of 67 Report Format Version 5.2.1 4.2.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA 802.11g CHANNEL TX Channel 6 FREQUENCY RANGE Below 1GHz DETECTOR FUNCTION Quasi-Peak (QP)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT 287 66 360 58 360 360 TABLE ANGLE
(Degree) 43.5 43.5 43.5 46.0 46.0 46.0
-15.3
-13.6
-16.5
-15.7
-8.2
-9.8
(m) 1.50 H 2.00 H 2.00 H 1.00 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 28.2 QP 45.32 29.9 QP 42.83 27.0 QP 40.10 30.3 QP 44.20 37.8 QP 37.26 36.2 QP 35.36 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 49.13 49.04 48.82 46.54 33.93 33.89 LEVEL
(dBuV/m) 34.8 QP 35.7 QP 35.1 QP 30.2 QP 34.5 QP 35.1 QP
(m) 1.00 V 1.22 V 1.00 V 1.00 V 1.00 V 1.50 V
-5.2
-4.4
-4.9
-13.3
-11.5
-10.9 40.0 40.0 40.0 43.5 46.0 46.0 TABLE ANGLE
(Degree) 173 3 247 333 100 243 ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-17.16
-12.93
-13.11
-13.91 0.55 0.83 CORRECTION FACTOR
(dB/m)
-14.33
-13.39
-13.70
-16.38 0.54 1.17 NO. 1 2 3 4 5 6 FREQ.
(MHz) 101.88 148.10 161.82 250.00 913.52 927.01 NO. FREQ.
(MHz) 1 2 3 4 5 6 34.71 51.82 58.71 106.73 912.89 956.98 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF141117E18 28 of 67 Report Format Version 5.2.1 ABOVE 1GHz DATA 802.11b CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0 74.0 54.0
-8.4
-13.9 LIMIT
(dBuV/m) ANTENNA HEIGHT 102 102 102 102 327 327 TABLE ANGLE
(Degree)
(m) 1.01 H 1.01 H 1.01 H 1.01 H 1.30 H 1.30 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 65.6 PK 68.34 40.1 AV 42.84 106.1 PK 108.74 103.0 AV 105.64 51.1 PK 45.83 47.0 AV 41.73 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 58.84 46.54 116.54 114.14 51.43 48.63 LEVEL
(dBuV/m) 56.1 PK 43.8 AV 113.9 PK 111.5 AV 56.7 PK 53.9 AV
(m) 1.04 V 1.04 V 1.04 V 1.04 V 1.11 V 1.11 V TABLE ANGLE
(Degree) 9 9 9 9 360 360 ANTENNA HEIGHT LIMIT
(dBuV/m)
-17.9
-10.2
-22.9
-7.0
-17.3
-0.1 74.0 54.0 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.64
-2.64 5.27 5.27 CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.64
-2.64 5.27 5.27 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 29 of 67 Report Format Version 5.2.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-14.2
-18.4 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-12.6
-12.8
-22.7
-6.0
-20.8
-7.6 24 24 24 24 24 24 35 35 283 283
(m) 1.03 H 1.03 H 1.03 H 1.03 H 1.03 H 1.03 H 1.10 H 1.10 H 1.08 H 1.08 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 59.8 PK 62.54 35.6 AV 38.34 106.2 PK 108.73 104.5 AV 107.03 61.4 PK 63.72 41.2 AV 43.52 51.3 PK 45.81 48.0 AV 42.51 53.2 PK 40.50 46.4 AV 33.70 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 57.04 43.44 117.73 115.23 60.62 47.22 52.01 47.61 46.00 41.10 LEVEL
(dBuV/m) 54.3 PK 40.7 AV 115.2 PK 112.7 AV 58.3 PK 44.9 AV 57.5 PK 53.1 AV 58.7 PK 53.8 AV
(m) 1.04 V 1.04 V 1.04 V 1.04 V 1.04 V 1.04 V 1.10 V 1.10 V 1.10 V 1.10 V 262 262 262 262 262 262 331 331 331 331
-15.7
-9.1
-16.5
-0.9
-15.3
-0.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m)
-19.7
-13.3 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.53
-2.53
-2.32
-2.32 5.49 5.49 12.70 12.70 CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.53
-2.53
-2.32
-2.32 5.49 5.49 12.70 12.70 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 2390.00 1 2390.00 2
*2437.00 3
*2437.00 4 2483.50 5 2483.50 6 4874.00 7 4874.00 8 7311.00 9 10 7311.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 30 of 67 Report Format Version 5.2.1 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-6.9
-13.6
-22.3
-6.4
-23.1
-10.9 22 22 22 22 51 51 293 293
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.14 H 1.14 H 1.07 H 1.07 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 106.3 PK 108.72 103.3 AV 105.72 67.1 PK 69.42 40.4 AV 42.72 51.7 PK 46.00 47.6 AV 41.90 50.9 PK 38.22 43.1 AV 30.42 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 116.52 114.12 51.30 48.10 44.12 40.82 LEVEL
(dBuV/m) 114.1 PK 111.7 AV 57.0 PK 53.8 AV 56.8 PK 53.5 AV
(m) 1.01 V 1.01 V 1.07 V 1.07 V 1.20 V 1.20 V TABLE ANGLE
(Degree) 97 97 360 360 78 78
-17.0
-0.2
-17.2
-0.5 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.42
-2.42
-2.32
-2.32 5.70 5.70 12.68 12.68 CORRECTION FACTOR
(dB/m)
-2.42
-2.42 5.70 5.70 12.68 12.68 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2462.00
*2462.00 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 31 of 67 Report Format Version 5.2.1 802.11g CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0 74.0 54.0
-13.6
-10.6 LIMIT
(dBuV/m) ANTENNA HEIGHT 66 66 66 66 290 290 TABLE ANGLE
(Degree)
(m) 1.25 H 1.25 H 1.25 H 1.25 H 1.18 H 1.18 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 60.4 PK 63.14 43.4 AV 46.14 106.2 PK 108.84 96.8 AV 99.44 63.1 PK 57.83 43.4 AV 38.13 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 73.24 56.14 117.64 108.64 58.63 38.43 LEVEL
(dBuV/m) 70.5 PK 53.4 AV 115.0 PK 106.0 AV 63.9 PK 43.7 AV
(m) 1.30 V 1.30 V 1.30 V 1.30 V 1.09 V 1.09 V TABLE ANGLE
(Degree) 216 216 216 216 350 350 ANTENNA HEIGHT LIMIT
(dBuV/m)
-10.9
-10.6
-10.1
-10.3 74.0 54.0 74.0 54.0 MARGIN
-3.5
-0.6
(dB) CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.64
-2.64 5.27 5.27 CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.64
-2.64 5.27 5.27 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 32 of 67 Report Format Version 5.2.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-11.8
-9.6
-11.2
-10.8
-15.1
-7.5 26 26 26 26 275 275 17 17
(m) 1.13 H 1.13 H 1.13 H 1.13 H 1.16 H 1.16 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 111.1 PK 113.63 101.2 AV 103.73 62.2 PK 64.52 44.4 AV 46.72 62.8 PK 57.31 43.2 AV 37.71 58.9 PK 46.20 46.5 AV 33.80 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 66.84 50.44 122.13 113.13 67.02 52.42 58.11 38.11 52.70 41.10 LEVEL
(dBuV/m) 64.1 PK 47.7 AV 119.6 PK 110.6 AV 64.7 PK 50.1 AV 63.6 PK 43.6 AV 65.4 PK 53.8 AV
(m) 1.04 V 1.04 V 1.04 V 1.04 V 1.04 V 1.04 V 1.09 V 1.09 V 1.34 V 1.34 V 259 259 259 259 259 259 338 338 338 338
-9.3
-3.9
-10.4
-10.4
-8.6
-0.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-9.9
-6.3
(dB) CORRECTION FACTOR
(dB/m)
-2.53
-2.53
-2.32
-2.32 5.49 5.49 12.70 12.70 CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.53
-2.53
-2.32
-2.32 5.49 5.49 12.70 12.70 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 2390.00 1 2390.00 2
*2437.00 3
*2437.00 4 2483.50 5 2483.50 6 4874.00 7 4874.00 8 7311.00 9 7311.00 10 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 33 of 67 Report Format Version 5.2.1 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-8.1
-7.9
-10.8
-10.6
-16.7
-8.8 57 57 57 57 279 279 279 279
(m) 1.05 H 1.05 H 1.05 H 1.05 H 1.16 H 1.16 H 1.07 H 1.07 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 106.3 PK 108.72 95.1 AV 97.52 65.9 PK 68.22 46.1 AV 48.42 63.2 PK 57.50 43.4 AV 37.70 57.3 PK 44.62 45.2 AV 32.52 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 118.12 108.82 71.92 55.82 58.30 38.10 47.62 36.22 LEVEL
(dBuV/m) 115.7 PK 106.4 AV 69.6 PK 53.5 AV 64.0 PK 43.8 AV 60.3 PK 48.9 AV
(m) 1.03 V 1.03 V 1.03 V 1.03 V 1.05 V 1.05 V 1.12 V 1.12 V 259 259 259 259 340 340 337 337
-4.4
-0.5
-10.0
-10.2
-13.7
-5.1 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.42
-2.42
-2.32
-2.32 5.70 5.70 12.68 12.68 CORRECTION FACTOR
(dB/m)
-2.42
-2.42
-2.32
-2.32 5.70 5.70 12.68 12.68 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 34 of 67 Report Format Version 5.2.1 802.11n (HT20) CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-6.4
-7.0 MARGIN 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) ANTENNA HEIGHT 44 44 44 44 292 292 TABLE ANGLE
(Degree)
(m) 1.04 H 1.04 H 1.04 H 1.04 H 1.15 H 1.15 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 67.6 PK 70.34 47.0 AV 49.74 104.4 PK 107.04 92.6 AV 95.24 63.5 PK 58.23 43.9 AV 38.63 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 76.34 55.94 115.24 105.74 58.63 38.63 LEVEL
(dBuV/m) 73.6 PK 53.2 AV 112.6 PK 103.1 AV 63.9 PK 43.9 AV
(m) 1.05 V 1.05 V 1.05 V 1.05 V 1.09 V 1.09 V TABLE ANGLE
(Degree) 259 259 259 259 346 346 ANTENNA HEIGHT LIMIT
(dBuV/m)
-10.5
-10.1
-10.1
-10.1 74.0 54.0 74.0 54.0 MARGIN
-0.4
-0.8
(dB) CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.64
-2.64 5.27 5.27 CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.64
-2.64 5.27 5.27 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 35 of 67 Report Format Version 5.2.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-20.5
-14.8 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-12.9
-10.2
-11.4
-11.0
-14.5
-7.1 5 5 5 5 5 5 286 286 29 29
(m) 1.01 H 1.01 H 1.01 H 1.01 H 1.01 H 1.01 H 1.15 H 1.15 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 53.5 PK 56.24 39.2 AV 41.94 112.0 PK 114.53 99.4 AV 101.93 61.1 PK 63.42 43.8 AV 46.12 62.6 PK 57.11 43.0 AV 37.51 59.5 PK 46.80 46.9 AV 34.20 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 67.24 50.64 121.93 112.63 71.52 53.52 49.01 36.91 54.80 40.90 LEVEL
(dBuV/m) 64.5 PK 47.9 AV 119.4 PK 110.1 AV 69.2 PK 51.2 AV 54.5 PK 42.4 AV 67.5 PK 53.6 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V 1.09 V 1.09 V 1.01 V 1.01 V 271 271 271 271 271 271 356 356 330 330
-4.8
-2.8
-19.5
-11.6
-6.5
-0.4 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-9.5
-6.1
(dB) CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.53
-2.53
-2.32
-2.32 5.49 5.49 12.70 12.70 CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.53
-2.53
-2.32
-2.32 5.49 5.49 12.70 12.70 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 2390.00 1 2390.00 2
*2437.00 3
*2437.00 4 2483.50 5 2483.50 6 4874.00 7 4874.00 8 7311.00 9 10 7311.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 36 of 67 Report Format Version 5.2.1 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-6.9
-7.4
-11.3
-11.1
-17.1
-9.2 70 70 70 70 293 293 269 269
(m) 1.04 H 1.04 H 1.04 H 1.04 H 1.19 H 1.19 H 1.10 H 1.10 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 104.5 PK 106.92 92.9 AV 95.32 67.1 PK 69.42 46.6 AV 48.92 62.7 PK 57.00 42.9 AV 37.20 56.9 PK 44.22 44.8 AV 32.12 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 115.82 105.42 73.72 55.62 58.40 38.30 48.32 36.62 LEVEL
(dBuV/m) 113.4 PK 103.0 AV 71.4 PK 53.3 AV 64.1 PK 44.0 AV 61.0 PK 49.3 AV
(m) 1.01 V 1.01 V 1.01 V 1.01 V 1.12 V 1.12 V 1.03 V 1.03 V 268 268 268 268 352 352 318 318
-2.6
-0.7
-9.9
-10.0
-13.0
-4.7 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.42
-2.42
-2.32
-2.32 5.70 5.70 12.68 12.68 CORRECTION FACTOR
(dB/m)
-2.42
-2.42
-2.32
-2.32 5.70 5.70 12.68 12.68 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 37 of 67 Report Format Version 5.2.1 802.11n (HT40) CHANNEL TX Channel 3 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-5.6
-4.7 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-10.9
-10.8
-17.2
-11.5 TABLE ANGLE
(Degree) 62 62 62 62 286 286 285 285
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.20 H 1.20 H 1.01 H 1.01 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 68.4 PK 71.14 49.3 AV 52.04 101.8 PK 104.39 92.8 AV 95.39 63.1 PK 57.75 43.2 AV 37.85 56.8 PK 44.08 42.5 AV 29.78 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 71.84 56.34 111.69 102.19 58.05 38.25 45.68 34.48 LEVEL
(dBuV/m) 69.1 PK 53.6 AV 109.1 PK 99.6 AV 63.4 PK 43.6 AV 58.4 PK 47.2 AV
(m) 1.03 V 1.03 V 1.03 V 1.03 V 1.05 V 1.05 V 1.13 V 1.13 V 271 271 271 271 342 342 314 314 TABLE ANGLE
(Degree)
-10.6
-10.4
-15.6
-6.8 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-4.9
-0.4
(dB) CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.59
-2.59 5.35 5.35 12.72 12.72 CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.59
-2.59 5.35 5.35 12.72 12.72 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 2390.00 2390.00
*2422.00
*2422.00 4844.00 4844.00 7266.00 7266.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 2390.00 2390.00
*2422.00
*2422.00 4844.00 4844.00 7266.00 7266.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 38 of 67 Report Format Version 5.2.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-7.9
-8.1
-10.7
-10.6
-17.2
-11.2 61 61 61 61 297 297 272 272
(m) 1.07 H 1.07 H 1.07 H 1.07 H 1.21 H 1.21 H 1.02 H 1.02 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 103.5 PK 106.03 94.5 AV 97.03 66.1 PK 68.42 45.9 AV 48.22 63.3 PK 57.81 43.4 AV 37.91 56.8 PK 44.10 42.8 AV 30.10 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 64.24 48.54 113.83 104.63 71.42 56.02 58.11 37.91 48.60 36.80 LEVEL
(dBuV/m) 61.5 PK 45.8 AV 111.3 PK 102.1 AV 69.1 PK 53.7 AV 63.6 PK 43.4 AV 61.3 PK 49.5 AV
(m) 1.02 V 1.02 V 1.02 V 1.02 V 1.02 V 1.02 V 1.04 V 1.04 V 1.02 V 1.02 V 272 272 272 272 272 272 325 325 300 300
-4.9
-0.3
-10.4
-10.6
-12.7
-4.5 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m)
-12.5
-8.2 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.53
-2.53
-2.32
-2.32 5.49 5.49 12.70 12.70 CORRECTION FACTOR
(dB/m)
-2.74
-2.74
-2.53
-2.53
-2.32
-2.32 5.49 5.49 12.70 12.70 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 2390.00 1 2390.00 2
*2437.00 3
*2437.00 4 2483.50 5 2483.50 6 4874.00 7 4874.00 8 7311.00 9 7311.00 10 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 39 of 67 Report Format Version 5.2.1 CHANNEL TX Channel 9 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-5.2
-4.6
-10.5
-10.4
-16.8
-11.2 37 37 37 37 299 299 283 283
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.25 H 1.25 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 102.1 PK 104.56 92.5 AV 94.96 68.8 PK 71.12 49.4 AV 51.72 63.5 PK 57.88 43.6 AV 37.98 57.2 PK 44.51 42.8 AV 30.11 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 111.66 101.86 71.62 55.92 58.48 38.38 45.91 34.81 LEVEL
(dBuV/m) 109.2 PK 99.4 AV 69.3 PK 53.6 AV 64.1 PK 44.0 AV 58.6 PK 47.5 AV
(m) 1.02 V 1.02 V 1.02 V 1.02 V 1.09 V 1.09 V 1.06 V 1.06 V 259 259 266 266 328 328 302 302
-4.7
-0.4
-9.9
-10.0
-15.4
-6.5 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.46
-2.46
-2.32
-2.32 5.62 5.62 12.69 12.69 CORRECTION FACTOR
(dB/m)
-2.46
-2.46
-2.32
-2.32 5.62 5.62 12.69 12.69 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2452.00
*2452.00 2483.50 2483.50 4904.00 4904.00 7356.00 7356.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2452.00
*2452.00 2483.50 2483.50 4904.00 4904.00 7356.00 7356.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF141117E18 40 of 67 Report Format Version 5.2.1 4.3 6dB BANDWIDTH MEASUREMENT 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP 40 100060 May 08, 2014 May 07, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : Jan. 06, 2015 4.3.3 TEST PROCEDURE 1. Set resolution bandwidth (RBW) = 100kHz. 2. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. 3. Trace mode = max hold. 4. Sweep = auto couple. 5. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.4 DEVIATION FROM TEST STANDARD No deviation 4.3.5 TEST SETUP Attenuator EUT SPECTRUM ANALYZER 4.3.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF141117E18 41 of 67 Report Format Version 5.2.1 4.3.7 TEST RESULTS CHANNEL CHANNEL FREQUENCY
(MHz) 6dB BANDWIDTH (MHz) CHAIN 1 CHAIN 0 MINIMUM LIMIT (MHz) PASS / FAIL 802.11b 1 6 11 802.11g 1 6 11 802.11n (HT20) 1 6 11 802.11n (HT40) 3 6 9 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 10.14 10.13 10.12 16.65 16.64 16.65 17.75 17.85 17.80 36.63 36.63 36.63 10.13 10.13 10.12 16.65 16.64 16.63 17.76 17.82 17.80 36.63 36.61 36.62 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Report No.: RF141117E18 42 of 67 Report Format Version 5.2.1 802.11b / Chain (0) : CH11 802.11g / Chain (1) : CH11 SPECTRUM PLOT OF WORST VALUE 802.11n (HT20) / Chain (0) : CH1 802.11n (HT40) / Chain (1) : CH6 Report No.: RF141117E18 43 of 67 Report Format Version 5.2.1 4.4 OCCUPIED BANDWIDTH MEASUREMENT 4.4.1 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP 40 100060 May 08, 2014 May 07, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : Jan. 06, 2015 4.4.2 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with resolution bandwidth in the range of 1% to 5% of the anticipated emission bandwidth, and a video bandwidth at least 3x the resolution bandwidth. The width of a frequency band such that, below the lower and above the upper frequency limits, the mean powers emitted are each equal to a specified percentage 0.5 %of the total mean power of a given emission. 4.4.3 DEVIATION FROM TEST STANDARD No deviation EUT 4.4.4 TEST SETUP 4.4.5 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. SPECTRUM ANALYZER Attenuator Report No.: RF141117E18 44 of 67 Report Format Version 5.2.1 4.4.6 TEST RESULTS CHANNEL CHANNEL FREQUENCY (MHz) OCCUPIED BANDWIDTH (MHz) CHAIN 1 CHAIN 0 802.11b 802.11g 1 6 11 1 6 11 802.11n (HT20) 1 6 11 802.11n (HT40) 3 6 9 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 12.36 12.36 12.24 17.04 18.48 16.80 17.76 22.44 17.76 36.80 36.80 36.80 12.24 12.36 12.24 16.80 20.64 16.92 17.76 24.36 17.76 37.00 37.00 36.80 Report No.: RF141117E18 45 of 67 Report Format Version 5.2.1 SPECTRUM PLOT OF WORST VALUE 802.11b / Chain (0) : CH1 802.11g / Chain (1) : CH6 802.11n (HT20) / Chain (1) : CH6 802.11n (HT40) / Chain (1) : CH3 Report No.: RF141117E18 46 of 67 Report Format Version 5.2.1 4.5 CONDUCTED OUTPUT POWER MEASUREMENT 4.5.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT For systems using digital modulation in the 24002483.5 MHz bands: 1 Watt
(30dBm) Per KDB 662911 D01 Multiple Transmitter Output Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT 4;
Array Gain = 0 dB (i.e., no array gain) for channel widths 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT 5. For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB. 4.5.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Power meter Anritsu Power sensor Anritsu Note:
MODEL NO. SERIAL NO. ML2495A 1014008 CALIBRATED DATE Apr. 30, 2014 CALIBRATED UNTIL Apr. 29, 2015 MA2411B 0917122 Apr. 30, 2014 Apr. 29, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : Jan. 06, 2015 4.5.3 TEST PROCEDURES The peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the peak power level. Report No.: RF141117E18 47 of 67 Report Format Version 5.2.1 4.5.4 DEVIATION FROM TEST STANDARD No deviation. 4.5.5 TEST SETUP EUT Attenuator Power Sensor Power Meter 4.5.6 EUT OPERATING CONDITIONS Same as Item 4.3.6 Report No.: RF141117E18 48 of 67 Report Format Version 5.2.1 4.5.7 TEST RESULTS FOR PEAK POWER CHANNEL FREQUENCY
(MHz) 802.11b 1 6 11 802.11g 1 6 11 2412 2437 2462 2412 2437 2462 802.11n (HT20) 1 6 11 2412 2437 2462 802.11n (HT40) 2422 2437 2452 3 6 9 PEAK POWER (dBm) CHAIN 0 CHAIN 1 TOTAL POWER
(mW) TOTAL POWER
(dBm) LIMIT
(dBm) PASS /
FAIL 22.22 22.02 21.60 24.58 25.03 23.82 22.60 24.95 22.28 21.51 23.71 20.56 21.96 22.24 21.72 24.38 24.75 23.15 22.45 24.33 21.08 21.21 22.67 19.66 323.761 326.715 293.138 561.235 616.958 447.529 357.762 583.627 297.277 273.709 419.89 206.233 25.10 25.14 24.67 27.49 27.90 26.51 25.54 27.66 24.73 24.37 26.23 23.14 30 30 30 30 30 30 30 30 30 30 30 30 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Report No.: RF141117E18 49 of 67 Report Format Version 5.2.1 FOR AVERAGE POWER CHANNEL FREQUENCY
(MHz) 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 802.11b 1 6 11 802.11g 1 6 11 802.1n (HT20) 1 6 11 802.1n (HT40) 3 6 9 AVERAGE POWER
(dBm) CHAIN 0 CHAIN 1 TOTAL POWER
(mW) TOTAL POWER
(dBm) 18.76 18.58 17.60 16.85 21.33 16.08 14.93 21.85 13.96 13.75 16.02 12.54 18.48 18.83 17.85 16.39 21.32 16.24 14.57 20.52 14.20 13.85 16.57 12.93 145.631 148.495 118.498 91.968 271.350 82.624 59.759 265.829 51.192 47.980 85.388 37.581 21.63 21.72 20.74 19.64 24.34 19.17 17.76 24.25 17.09 16.81 19.31 15.75 Report No.: RF141117E18 50 of 67 Report Format Version 5.2.1 4.6 POWER SPECTRAL DENSITY MEASUREMENT 4.6.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT The Maximum of Power Spectral Density Measurement is 8dBm. 4.6.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP 40 100060 May 08, 2014 May 07, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : Jan. 06, 2015 4.6.3 TEST PROCEDURE 1. Set the RBW = 3 kHz, VBW =10 kHz, Detector = peak. 2. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize. 3. Use the peak marker function to determine the maximum amplitude level. 4.6.4 DEVIATION FROM TEST STANDARD No deviation 4.6.5 TEST SETUP 4.6.6 EUT OPERATING CONDITION Attenuator EUT SPECTRUM ANALYZER Same as Item 4.3.6 Report No.: RF141117E18 51 of 67 Report Format Version 5.2.1 4.6.7 TEST RESULTS 802.11b CHAIN CHANNEL FREQUENCY TX 0 1 1 6 11 1 6 11
(MHz) 2412 2437 2462 2412 2437 2462 PSD
(dBm)
-12.97
-12.44
-13.40
-12.73
-12.30
-12.93 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 TOTAL PSD
(dBm)
-9.96
-9.43
-10.39
-9.72
-9.29
-9.92 LIMIT
(dBm) 7.84 7.84 7.84 7.84 7.84 7.84 PASS
/FAIL PASS PASS PASS PASS PASS PASS NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.16dBi > 6dBi , so the power density limit shall be reduced to 8-(6.16-6) = 7.84dBm. 802.11g 0 1 1 6 11 1 6 11 2412 2437 2462 2412 2437 2462
-13.63
-8.86
-13.07
-14.28
-8.91
-15.96 3.01 3.01 3.01 3.01 3.01 3.01
-10.62
-5.85
-10.06
-11.27
-5.90
-12.95 7.84 7.84 7.84 7.84 7.84 7.84 PASS PASS PASS PASS PASS PASS NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.16dBi > 6dBi , so the power density limit shall be reduced to 8-(6.16-6) = 7.84dBm. Report No.: RF141117E18 52 of 67 Report Format Version 5.2.1 802.11n (HT20) TX CHAIN CHANNEL FREQUENCY 0 1 1 6 11 1 6 11
(MHz) 2412 2437 2462 2412 2437 2462 PSD
(dBm)
-12.32
-8.54
-13.59
-15.40
-8.76
-13.59 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 Total PSD
(dBm)
-9.31
-5.53
-10.58
-12.39
-5.75
-10.58 Limit
(dBm) 7.84 7.84 7.84 7.84 7.84 7.84 PASS
/FAIL PASS PASS PASS PASS PASS PASS NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.16dBi > 6dBi , so the power density limit shall be reduced to 8-(6.16-6) = 7.84dBm. 802.11n (HT40) 0 1 3 6 9 3 6 9 2422 2437 2452 2422 2437 2452
-17.49
-16.69
-20.29
-18.31
-16.63
-21.43 3.01 3.01 3.01 3.01 3.01 3.01
-14.48
-13.68
-17.28
-15.30
-13.62
-18.42 7.84 7.84 7.84 7.84 7.84 7.84 PASS PASS PASS PASS PASS PASS NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.16dBi > 6dBi , so the power density limit shall be reduced to 8-(6.16-6) = 7.84dBm. Uncorrelated Report No.: RF141117E18 53 of 67 Report Format Version 5.2.1 SPECTRUM PLOT OF WORST VALUE 802.11b / Chain(0) : CH11 802.11g / Chain(0) : CH6 802.11n (HT20) / Chain(0) : CH6 802.11n (HT40) / Chain(1) : CH6 Report No.: RF141117E18 54 of 67 Report Format Version 5.2.1 4.7 CONDUCTED OUT-BAND EMISSION MEASUREMENT 4.7.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.7.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP 40 100060 May 08, 2014 May 07, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : Jan. 06, 2015 4.7.3 TEST PROCEDURE Measurement Procedure - Reference Level 1. Set the RBW = 100 kHz. 2. Set the VBW 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Measurement Procedure Unwanted Emission Level 1. Set RBW = 100 kHz. 2. Set VBW 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. Report No.: RF141117E18 55 of 67 Report Format Version 5.2.1 4.7.4 DEVIATION FROM TEST STANDARD No deviation 4.7.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER 4.7.6 EUT OPERATING CONDITION Same as Item 4.3.6 4.7.7 TEST RESULTS The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF141117E18 56 of 67 Report Format Version 5.2.1 802.11b Chain (0) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF141117E18 57 of 67 Report Format Version 5.2.1 Chain (1) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF141117E18 58 of 67 Report Format Version 5.2.1 802.11g Chain (0) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF141117E18 59 of 67 Report Format Version 5.2.1 Chain (1) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF141117E18 60 of 67 Report Format Version 5.2.1 802.11n (HT20) Chain (0) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF141117E18 61 of 67 Report Format Version 5.2.1 Chain (1) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF141117E18 62 of 67 Report Format Version 5.2.1 802.11n (HT40) Chain (0) CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF141117E18 63 of 67 Report Format Version 5.2.1 Chain (1) CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF141117E18 64 of 67 Report Format Version 5.2.1 5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF141117E18 65 of 67 Report Format Version 5.2.1 6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab:
Tel: 886-2-26052180 Fax: 886-2-26052943 Hwa Ya EMC/RF/Safety Lab:
Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF/Telecom Lab:
Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also. Report No.: RF141117E18 66 of 67 Report Format Version 5.2.1 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test.
--- END ---
Report No.: RF141117E18 67 of 67 Report Format Version 5.2.1
1 2 3 | Test Report (NII) | Test Report | 1011.37 KiB | January 29 2015 |
FCC TEST REPORT (15.407) REPORT NO.: RF141117E18-1 MODEL NO.: EX3700 FCC ID: PY314400298 RECEIVED: Nov. 17, 2014 TESTED: Nov. 28 to Dec. 17, 2014 ISSUED: Jan. 16, 2015 APPLICANT: NETGEAR, Inc. ADDRESS: 350 East Plumeria Drive San Jose, CA 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. Ltd., Taoyuan Branch Hsin Chu Laboratory TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF141117E18-1 1 of 65 Report Format Version 5.3.0 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 4 1. CERTIFICATION ...................................................................................................... 5 2. SUMMARY OF TEST RESULTS .............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 7 3. GENERAL INFORMATION ....................................................................................... 8 GENERAL DESCRIPTION OF EUT ......................................................................... 8 3.1 3.2 DESCRIPTION OF TEST MODES ......................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 11 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 13 3.3 DUTY CYCLE OF TEST SIGNAL ........................................................................... 14 3.4 3.5 DESCRIPTION OF SUPPORT UNITS ................................................................... 15 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 16 3.6 TEST TYPES AND RESULTS ................................................................................ 17 4. 4.1 CONDUCTED EMISSION MEASUREMENT ......................................................... 17 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 17 4.1.2 TEST INSTRUMENTS ........................................................................................... 17 4.1.3 TEST PROCEDURES ............................................................................................ 18 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 18 4.1.5 TEST SETUP ......................................................................................................... 18 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 19 4.1.7 TEST RESULTS ..................................................................................................... 20 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 22 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 22 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS .......... 23 4.2.3 TEST INSTRUMENTS ........................................................................................... 24 4.2.4 TEST PROCEDURES ............................................................................................ 25 4.2.5 DEVIATION FROM TEST STANDARD .................................................................. 25 4.2.6 TEST SETUP ......................................................................................................... 26 4.2.7 EUT OPERATING CONDITION ............................................................................. 26 4.2.8 TEST RESULTS ..................................................................................................... 27 4.3 TRANSMIT POWER MEASUREMENT .................................................................. 46 4.3.1 LIMITS OF TRANSMIT POWER MEASUREMENT ............................................... 46 4.3.2 TEST INSTRUMENTS ........................................................................................... 46 4.3.3 TEST PROCEDURE .............................................................................................. 47 4.3.4 DEVIATION FROM TEST STANDARD .................................................................. 47 4.3.5 TEST SETUP ......................................................................................................... 47 4.3.6 EUT OPERATING CONDITIONS ........................................................................... 47 4.3.7 TEST RESULTS ..................................................................................................... 48 4.4 PEAK POWER SPECTRAL DENSITY MEASUREMENT ...................................... 49 Report No.: RF141117E18-1 2 of 65 Report Format Version 5.3.0 4.4.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT.................... 49 4.4.2 TEST INSTRUMENTS ........................................................................................... 49 4.4.3 TEST PROCEDURES ............................................................................................ 50 4.4.4 DEVIATION FROM TEST STANDARD .................................................................. 51 4.4.5 TEST SETUP ......................................................................................................... 51 4.4.6 EUT OPERATING CONDITIONS ........................................................................... 51 4.4.7 TEST RESULTS ..................................................................................................... 52 4.5 FREQUENCY STABILITY ...................................................................................... 56 4.5.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT ....................................... 56 4.5.2 TEST INSTRUMENTS ........................................................................................... 56 4.5.3 TEST PROCEDURE .............................................................................................. 56 4.5.4 DEVIATION FROM TEST STANDARD .................................................................. 57 4.5.5 TEST SETUP ......................................................................................................... 57 4.5.6 EUT OPERATING CONDITION ............................................................................. 57 4.5.7 TEST RESULTS ..................................................................................................... 58 4.6 6DB BANDWIDTH MEASUREMENT ..................................................................... 59 4.6.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT .................................................. 59 4.6.2 TEST INSTRUMENTS ........................................................................................... 59 4.6.3 TEST PROCEDURE .............................................................................................. 59 4.6.4 DEVIATION FROM TEST STANDARD .................................................................. 59 4.6.5 TEST SETUP ......................................................................................................... 60 4.6.6 EUT OPERATING CONDITIONS ........................................................................... 60 4.6.7 TEST RESULTS ..................................................................................................... 61 PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................. 63 5. 6. INFORMATION ON THE TESTING LABORATORIES ........................................... 64 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO 7. THE EUT BY THE LAB ........................................................................................... 65 Report No.: RF141117E18-1 3 of 65 Report Format Version 5.3.0 RELEASE CONTROL RECORD ISSUE NO. RF141117E18-1 REASON FOR CHANGE Original release DATE ISSUED Jan. 16, 2015 Report No.: RF141117E18-1 4 of 65 Report Format Version 5.3.0 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
For 5GHz, 5150~5250MHz APPLIED STANDARD: FCC PART 15, SUBPART E (SECTION 15.407 Under New Rule) STANDARD SECTION TEST TYPE RESULT REMARK 15.407(b)(6) AC Power Conducted Emission PASS 15.407 Radiated Emissions & Band Edge Measurement
(b)(1/2/3/4/6) 15.407(a/1/2/3) Transmit Power 15.407(a/1/2/3) Peak Power Spectral Density 15.407(e) 6dB bandwidth 15.407(g) Frequency Stability 15.203 Antenna Requirement Meet the requirement of limit. Minimum passing margin is
-14.39dB at 21.66406MHz Meet the requirement of limit. Minimum passing margin is
-0.1dB at 5150.00MHz PASS PASS Meet the requirement of limit. PASS Meet the requirement of limit. PASS Meet the requirement of limit. PASS Meet the requirement of limit. PASS Antenna connector is i-pex
(U-NII-3 Band only)
(MHF) not a standard connector. NOTE:
1. The EUT was operating in 2400 ~ 2483.5MHz, 5.15~5.25GHz and 5.725~5.850GHz frequencies band. This report was recorded the RF parameters including 5.15~5.25GHz and 5.725~5.850GHz. For the 2400 ~ 2483.5MHz RF parameters was recorded in another test report. 2. The DFS report was recorded in another test report. Report No.: RF141117E18-1 6 of 65 Report Format Version 5.3.0 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz -6GHz) Radiated emissions (6GHz -18GHz) Radiated emissions (18GHz -40GHz) Value 2.86 dB 5.43 dB 3.65 dB 3.88 dB 4.11 dB Report No.: RF141117E18-1 7 of 65 Report Format Version 5.3.0 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT MODEL NO. POWER SUPPLY MODULATION TYPE AC750 WiFi Range Extender EX3700 100-250Vac, 0.14A, 50-60Hz CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode MODULATION TECHNOLOGY DSSS,OFDM TRANSFER RATE OPERATING FREQUENCY NUMBER OF CHANNEL MAXIMUM OUTPUT POWER 802.11b: up to 11Mbps 802.11a / g: up to 54Mbps 802.11n: up to 300Mbps 802.11ac: up to 866.7Mbps For 15.407 5.18 ~ 5.24GHz, 5.745 ~ 5.825GHz For 15.247 2.412 ~ 2.462GHz For 15.407 9 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 4 for 802.11n (HT40), 802.11ac (VHT40) 2 for 802.11ac (VHT80) For 15.247 11 for 802.11b, 802.11g, 802.11n (HT20) 7 for 802.11n (HT40) For 15.407 802.11a: 306.426mW 802.11ac (VHT20): 281.355mW 802.11ac (VHT40): 152.769mW 802.11ac (VHT80): 45.764mW For 15.247 802.11b: 326.715mW 802.11g: 616.958mW 802.11n (HT20): 583.627mW 802.11n (HT40): 419.89mW Report No.: RF141117E18-1 8 of 65 Report Format Version 5.3.0 Refer to note as below NA Refer to users manual ANTENNA TYPE DATA CABLE I/O PORTS ASSOCIATED DEVICES NA NOTE:
1. 2.4GHz and 5GHz technology can transmit at same time. 2. The antennas provided to the EUT, please refer to the following table:
Antenna Gain(dBi)
<including cable Ant. No. Brand Model NA Antenna R NETGEAR loss>
3.1 3 3.2 3.2 3.3 3.2 4 4 3.9 3.1 3. The EUT incorporates a MIMO function. Antenna L NETGEAR NA Frequency range
(GHz ~ GHz) Antenna Type Connecter Type Cable Length
(mm) 2.4~2.4835 5.15~5.25 5.25~5.35 5.47~5.725 5.725~5.85 2.4~2.4835 5.15~5.25 5.25~5.35 5.47~5.725 5.725~5.85 Dipole i-pex (MHF) 35 Dipole i-pex (MHF) 75 MODULATION MODE DATA RATE (MCS) For 2.4GHz Band 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) 802.11a 802.11n (HT20) 802.11n (HT40) 802.11ac (VHT20) 802.11ac (VHT40) 802.11ac (VHT80)
&
&
&
1 ~ 11Mbps 6 ~ 54Mbps MCS 0~7 MCS 8~15 For 5GHz Band TX & RX CONFIGURATION 2RX 2TX 2RX 2TX 2TX 2RX 2RX 2TX 6 ~ 54Mbps MCS 0~7 MCS 8~15 MCS0~8 Nss= 1 MCS0~8 Nss= 2 MCS0~9 Nss= 1 MCS0~9 Nss= 2 2TX 2TX 2TX 2TX 2TX 2TX 2TX 2RX 2RX 2RX 2RX 2RX 2RX 2RX Note: The modulation and bandwidth are similar for 802.11n mode for 20MHz (40MHz) and 802.11ac mode for 20MHz (40MHz), therefore investigated worst case to representative mode in test report. (Final test mode refer section 3.2.1) 4. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF141117E18-1 9 of 65 Report Format Version 5.3.0 3.2 DESCRIPTION OF TEST MODES Operated in 5150 ~ 5250MHz band:
4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 36 40 5180 MHz 5200 MHz 44 48 5220 MHz 5240 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40):
CHANNEL 38 FREQUENCY 5190 MHz CHANNEL 46 FREQUENCY 5230 MHz 1 channel is provided for 802.11ac (VHT80):
CHANNEL 42 FREQUENCY 5210 MHz Operated in 5725 ~ 5850MHz band:
5 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 149 153 157 5745 MHz 5765 MHz 5785 MHz 161 165 5805 MHz 5825 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40):
CHANNEL FREQUENCY 151 159 5755 MHz 5795 MHz 1 channel is provided for 802.11ac (VHT80):
CHANNEL 155 FREQUENCY 5775 MHz Report No.: RF141117E18-1 10 of 65 Report Format Version 5.3.0 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT CONFIGURE MODE APPLICABLE TO PLC RE < 1G RE 1G APCM DESCRIPTION
-
-
Where PLC: Power Line Conducted Emission RE 1G: Radiated Emission above 1GHz RE < 1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement Note: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane . POWER LINE CONDUCTED EMISSION TEST:
Pre -Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11a AVAILABLE CHANNEL 36 to 48
&
149 to 165 TESTED CHANNEL MODULATION TECHNOLOGY 48 OFDM MODULATION DATA RATE TYPE BPSK
(Mbps) 6 RADIATED EMISSION TEST (BELOW 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11a AVAILABLE CHANNEL 36 to 48
&
149 to 165 TESTED CHANNEL MODULATION TECHNOLOGY 48 OFDM MODULATION DATA RATE TYPE BPSK
(Mbps) 6 Report No.: RF141117E18-1 11 of 65 Report Format Version 5.3.0 RADIATED EMISSION TEST (ABOVE 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11a AVAILABLE CHANNEL 36 to 48
&
149 to 165 36 to 48 802.11ac (VHT20)
&
149 to 165 38 to 46 TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE TYPE
(Mbps) 36, 40, 48, 149, 157, 165, 36, 40, 48, 149, 157, 165, OFDM BPSK 6 OFDM BPSK 6.5 802.11ac (VHT40)
&
38, 46, 151, 159 OFDM 151 to 159 802.11ac (VHT80) 42, 155 42, 155 OFDM ANTENNA PORT CONDUCTED MEASUREMENT:
BPSK BPSK 13.5 29.3 Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11a AVAILABLE CHANNEL 36 to 48
&
149 to 165 36 to 48 802.11ac (VHT20)
&
149 to 165 38 to 46 TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE TYPE
(Mbps) 36, 40, 48, 149, 157, 165, 36, 40, 48, 149, 157, 165, OFDM BPSK 6 OFDM BPSK 6.5 802.11ac (VHT40)
&
38, 46, 151, 159 OFDM 151 to 159 802.11ac (VHT80) 42, 155 42, 155 OFDM BPSK BPSK 13.5 29.3 TEST CONDITION:
APPLICABLE TO PLC RE<1G RE1G APCM ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY 24deg. C, 71%RH 25deg. C, 74%RH 23deg. C, 68%RH 25deg. C, 60%RH 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz Wythe Lin Gary Cheng Gary Cheng Anderson Chen Report No.: RF141117E18-1 12 of 65 Report Format Version 5.3.0 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart E (15.407) 789033 D02 General UNII Test Procedures New Rules v01 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. () Report No.: RF141117E18-1 13 of 65 Report Format Version 5.3.0 3.4 DUTY CYCLE OF TEST SIGNAL If duty cycle of test signal is 98 %, duty factor is not required. If duty cycle of test signal is < 98 %, duty factor shall be considered. 802.11a: Duty cycle = 1.436 ms/1.45 ms = 0.99 802.11ac (VHT20): Duty cycle = 1.356 ms/1.371 ms = 0.989 802.11ac (VHT40): Duty cycle = 0.672 ms/0.686 ms = 0.98 802.11ac (VHT80): Duty cycle = 0.335 ms/0.346 ms = 0.968, Duty factor = 10 * log( 1/0.968) = 0.14 802.11a 802.11ac (VHT20) 802.11ac (VHT40) 802.11ac (VHT80) Report No.: RF141117E18-1 14 of 65 Report Format Version 5.3.0 3.5 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Serial No. Model No. Product Remark FCC ID Brand A NOTEBOOK COMPUTER DELL PP32LA HSLB32S FCC DoC Provided by Lab NOTE:
1. All power cords of the above support units are non-shielded (1.8 m). No. Length (m) Cable Qty. Shielded
(Yes/ No) RJ45 1 10 No 1 Cores
(Number) 0 Remark Provided by Lab Report No.: RF141117E18-1 15 of 65 Report Format Version 5.3.0 3.6 CONFIGURATION OF SYSTEM UNDER TEST Remote site EUT LAN 1 NOTEBOOK COMPUTER (A) Report No.: RF141117E18-1 16 of 65 Report Format Version 5.3.0 4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) 0.15-0.5 0.5-5 5-30 CONDUCTED LIMIT (dBV) Quasi-peak Average 56 to 46 66 to 56 56 60 46 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 4.1.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Test Receiver ROHDE & SCHWARZ Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral) ROHDE & SCHWARZ RF Cable
(JYEBAO) 50 ohms Terminator 50 ohms Terminator Software ADT Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL ESCS 30 100375 Apr. 29, 2014 Apr. 28, 2015 NSLK-8127 8127-522 Sep. 15, 2014 Sep. 14, 2015 ENV216 100071 Nov. 10, 2014 Nov. 09, 2015 5DFB COCCAB-001 Mar. 10 , 2014 Mar. 09, 2015 N/A N/A BV ADT_Cond_V7.3.7. 3 EMC-03 EMC-02 Sep. 22, 2014 Sep. 21, 2015 Sep. 30, 2014 Sep. 29, 2015 NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: Nov. 28, 2014 Report No.: RF141117E18-1 17 of 65 Report Format Version 5.3.0 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. b. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. c. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. d. The frequency range from 150kHz to 30MHz was searched. Emission level under (Limit 20dB) was not recorded. NOTE:
1. The resolution bandwidth of test receiver is 9kHz for Quasi-peak detection (QP) & Average detection (AV). 4.1.4 DEVIATION FROM TEST STANDARD No deviation 4.1.5 TEST SETUP For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: RF141117E18-1 18 of 65 Report Format Version 5.3.0 4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit A (Notebook Computer) which is placed in remote site. 2. The communication partner run test program QATool.exe to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF141117E18-1 19 of 65 Report Format Version 5.3.0 4.1.7 TEST RESULTS PHASE No 1 2 3 4 5 6 Freq.
[MHz]
0.15000 0.32584 0.90000 4.86328 12.13672 21.66406 REMARKS:
Line (L) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 46.67 0.07 0.08 36.75 22.92 0.12 32.95 0.28 28.92 0.51 0.73 36.67 46.60 38.40 36.67 33.07 22.80 18.45 32.67 24.64 28.41 25.65 35.94 34.88 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 66.00 38.47 33.15 59.56 56.00 18.57 56.00 24.92 60.00 26.16 35.61 60.00 AV. Q.P. AV.
-17.53 56.00 49.56
-16.40
-27.43 46.00
-21.08 46.00
-23.84 50.00 50.00
-14.39
-19.33
-22.80
-33.08
-23.05
-31.08
-23.33 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF141117E18-1 20 of 65 Report Format Version 5.3.0 PHASE Neutral (N) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 0.06 40.13 39.55 0.08 24.46 0.12 32.14 0.29 0.56 28.59 36.80 0.78 40.07 30.90 39.47 35.04 24.34 20.42 31.85 23.35 28.03 24.49 36.02 34.82 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 30.96 64.61 59.97 35.12 56.00 20.54 60.00 23.64 25.05 60.00 60.00 35.60 AV. Q.P. AV. 54.61
-23.65
-14.85 49.97
-25.46 46.00
-26.36 50.00 50.00
-24.95
-14.40 50.00
-24.48
-20.42
-31.54
-27.86
-31.41
-23.20 No 1 2 3 4 5 6 Freq.
[MHz]
0.17734 0.31016 0.84531 5.03125 13.48047 21.66406 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF141117E18-1 21 of 65 Report Format Version 5.3.0 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table:
Frequencies
(MHz) Field strength
(microvolts/meter) Measurement distance
(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF141117E18-1 22 of 65 Report Format Version 5.3.0 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS APPLICABLE TO LIMIT 789033 D02 General UNII Test Procedures New Rules v01 FIELD STRENGTH AT 3m PK:74 (dBV/m) AV:54 (dBV/m) APPLICABLE TO EIRP LIMIT EQUIVALENT FIELD STRENGTH AT 3m 15.407(b)(1) 15.407(b)(2) 15.407(b)(3) 15.407(b)(4) PK:-27 (dBm/MHz) PK:68.2(dBV/m) PK:-27 (dBm/MHz) *1 PK:-17 (dBm/MHz) *2 PK: 68.2(dBV/m) *1 PK:78.2 (dBV/m) *2 NOTE: *1 beyond 10MHz of the band edge *2 within 10 MHz of band edge The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength:
E =
30 P 1000000 3 V/m, where P is the eirp (Watts). Report No.: RF141117E18-1 23 of 65 Report Format Version 5.3.0 4.2.3 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY50010156 Aug. 11, 2014 Aug. 10, 2015 ZFL-1000VH2 B AMP-ZFL-04 Nov. 12, 2014 Nov. 11, 2015 VULB 9168 9168-361 Feb. 27, 2014 Feb. 26, 2015 NA CHHCAB_001 Oct. 05, 2014 Oct. 04, 2015 AIH.8018 0000220091110 Aug. 26, 2014 Aug. 25, 2015 8449B 300801923 Oct. 28, 2014 Oct. 27, 2015 RF Cable NA 131206 131215 SNMY23685/4 Jan. 17, 2014 Jan. 16, 2015 Spectrum Analyzer R&S Pre-Amplifier EMCI Horn_Antenna SCHWARZBECK RF Cable Software Antenna Tower & Turn Table CT NA Note:
FSV40 100964 July 05, 2014 July 04, 2015 EMC184045 980143 Jan. 17, 2014 Jan. 16, 2015 BBHA 9170 9170-424 Aug. 26, 2014 Aug. 25, 2015 NA ADT_Radiated _V8.7.07 RF104-121 RF104-204 NA NA Dec. 12, 2013 Dec. 11, 2014 NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: Dec. 04, 2014 Report No.: RF141117E18-1 24 of 65 Report Format Version 5.3.0 4.2.4 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average (Duty cycle < 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). 4. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (Duty cycle 98%) for Average detection (AV) at frequency above 1GHz. 5. All modes of operation were investigated and the worst-case emissions are reported. 4.2.5 DEVIATION FROM TEST STANDARD No deviation Report No.: RF141117E18-1 25 of 65 Report Format Version 5.3.0 4.2.6 TEST SETUP
<Frequency Range below 1GHz>
EUT&
Support Units 80cm 3m 10m Turn Table Ground Plane Test Receiver Ant. Tower 1-4m Variable
<Frequency Range above 1GHz>
EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 4.2.7 EUT OPERATING CONDITION Same as 4.1.6 Report No.: RF141117E18-1 26 of 65 Report Format Version 5.3.0 4.2.8 TEST RESULTS BELOW 1GHz WORST-CASE DATA 802.11a CHANNEL TX Channel 48 FREQUENCY RANGE Below 1GHz DETECTOR FUNCTION Quasi-Peak (QP)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT 290 67 360 60 358 360 TABLE ANGLE
(Degree) 43.5 43.5 43.5 46.0 46.0 46.0
-15.4
-13.6
-16.5
-15.7
-8.2
-9.8
(m) 1.50 H 2.00 H 2.00 H 1.00 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 28.1 QP 45.28 29.9 QP 42.85 27.0 QP 40.10 30.3 QP 44.23 37.8 QP 37.26 36.2 QP 35.39 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 49.15 49.03 48.82 46.60 33.96 33.93 LEVEL
(dBuV/m) 34.8 QP 35.6 QP 35.1 QP 30.2 QP 34.5 QP 35.1 QP
(m) 1.00 V 1.22 V 1.00 V 1.00 V 1.00 V 1.50 V
-5.2
-4.4
-4.9
-13.3
-11.5
-10.9 40.0 40.0 40.0 43.5 46.0 46.0 TABLE ANGLE
(Degree) 168 5 250 343 100 245 ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-17.16
-12.93
-13.11
-13.91 0.55 0.83 CORRECTION FACTOR
(dB/m)
-14.33
-13.39
-13.70
-16.38 0.54 1.17 NO. 1 2 3 4 5 6 FREQ.
(MHz) 101.85 148.10 161.82 249.99 913.53 927.10 NO. FREQ.
(MHz) 1 2 3 4 5 6 34.72 51.82 58.71 106.73 912.90 956.99 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF141117E18-1 27 of 65 Report Format Version 5.3.0 ABOVE 1GHz DATA 802.11a CHANNEL TX Channel 36 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-12.3
-2.3
-4.7
-0.3
-20.2
-11.6
-11.4
-4.8 TABLE ANGLE
(Degree) 10 10 10 10 44 44 307 307 31 31
(m) 1.23 H 1.23 H 1.23 H 1.23 H 1.25 H 1.25 H 1.04 H 1.04 H 1.23 H 1.23 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 61.7 PK 57.68 51.7 AV 47.68 69.3 PK 65.02 53.7 AV 49.42 114.7 PK 110.31 105.7 AV 101.31 53.8 PK 43.74 42.4 AV 32.34 62.6 PK 47.76 49.2 AV 34.36 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 56.28 46.18 64.12 48.12 108.91 99.91 47.94 35.34 46.56 34.06 LEVEL
(dBuV/m) 60.3 PK 50.2 AV 68.4 PK 52.4 AV 113.3 PK 104.3 AV 58.0 PK 45.4 AV 61.4 PK 48.9 AV
(m) 1.23 V 1.23 V 1.23 V 1.23 V 1.23 V 1.23 V 1.39 V 1.39 V 1.39 V 1.39 V 82 82 82 82 82 82 12 12 83 83 TABLE ANGLE
(Degree)
-13.7
-3.8
-5.6
-1.6
-16.0
-8.6
-12.6
-5.1 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.02 4.02 4.28 4.28 4.39 4.39 10.06 10.06 14.84 14.84 CORRECTION FACTOR
(dB/m) 4.02 4.02 4.28 4.28 4.39 4.39 10.06 10.06 14.84 14.84 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 5061.00 5061.00 5150.00 5150.00
*5180.00
*5180.00
#10360.00
#10360.00 15540.00 15540.00 NO. FREQ.
(MHz) 1 5061.00 2 5061.00 3 5150.00 4 5150.00 5
*5180.00 6
*5180.00 7
#10360.00 8
#10360.00 9 15540.00 10 15540.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 28 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 40 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-10.2
-2.4 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-18.8
-10.8
-11.0
-3.6 TABLE ANGLE
(Degree) 64 64 64 64 312 312 42 42
(m) 1.33 H 1.33 H 1.33 H 1.33 H 1.00 H 1.00 H 1.25 H 1.25 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 63.8 PK 59.62 51.6 AV 47.42 116.2 PK 111.76 107.0 AV 102.56 55.2 PK 45.13 43.2 AV 33.13 63.0 PK 47.94 50.4 AV 35.34 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 55.72 44.62 111.46 102.06 49.33 36.33 47.34 34.44 LEVEL
(dBuV/m) 59.9 PK 48.8 AV 115.9 PK 106.5 AV 59.4 PK 46.4 AV 62.4 PK 49.5 AV
(m) 1.20 V 1.20 V 1.20 V 1.20 V 1.41 V 1.41 V 1.44 V 1.44 V TABLE ANGLE
(Degree) 81 81 81 81 20 20 84 84
-14.6
-7.6
-11.6
-4.5 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-14.1
-5.2 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.18 4.18 4.44 4.44 10.07 10.07 15.06 15.06 CORRECTION FACTOR
(dB/m) 4.18 4.18 4.44 4.44 10.07 10.07 15.06 15.06 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5119.00 5119.00
*5200.00
*5200.00
#10400.00
#10400.00 15600.00 15600.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5119.00 5119.00
*5200.00
*5200.00
#10400.00
#10400.00 15600.00 15600.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 29 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 48 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-13.3
-3.2 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-18.5
-10.7
-11.6
-3.9 TABLE ANGLE
(Degree) 60 60 60 60 325 325 35 35
(m) 1.09 H 1.09 H 1.09 H 1.09 H 1.01 H 1.01 H 1.25 H 1.25 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 60.7 PK 56.52 50.8 AV 46.62 115.5 PK 111.09 106.0 AV 101.59 55.5 PK 45.24 43.3 AV 33.04 62.4 PK 47.73 50.1 AV 35.43 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 53.02 43.42 109.99 100.49 50.04 36.84 49.83 35.93 LEVEL
(dBuV/m) 57.2 PK 47.6 AV 114.4 PK 104.9 AV 60.3 PK 47.1 AV 64.5 PK 50.6 AV
(m) 1.18 V 1.18 V 1.18 V 1.18 V 1.32 V 1.32 V 1.00 V 1.00 V 83 83 83 83 313 313 359 359 TABLE ANGLE
(Degree)
-13.7
-6.9
-9.5
-3.4 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-16.8
-6.4 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.18 4.18 4.41 4.41 10.26 10.26 14.67 14.67 CORRECTION FACTOR
(dB/m) 4.18 4.18 4.41 4.41 10.26 10.26 14.67 14.67 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5119.00 5119.00
*5240.00
*5240.00
#10480.00
#10480.00 15720.00 15720.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5119.00 5119.00
*5240.00
*5240.00
#10480.00
#10480.00 15720.00 15720.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 30 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 149 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0 78.2
-14.5
-9.6
-0.3 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-20.3
-11.6
-14.8
-8.7 TABLE ANGLE
(Degree) 12 12 12 12 12 320 320 25 25
(m) 1.09 H 1.09 H 1.09 H 1.09 H 1.09 H 1.00 H 1.00 H 1.24 H 1.24 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 59.5 PK 54.60 44.4 AV 39.50 77.9 PK 72.97 109.7 PK 104.78 99.3 AV 94.38 53.7 PK 43.05 42.4 AV 31.75 59.2 PK 39.75 45.3 AV 25.85 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 50.70 36.60 69.67 102.68 92.58 43.55 30.35 46.75 23.75 LEVEL
(dBuV/m) 55.6 PK 41.5 AV 74.6 PK 107.6 PK 97.5 AV 54.2 PK 41.0 AV 66.2 PK 43.2 AV
(m) 1.24 V 1.24 V 1.24 V 1.24 V 1.24 V 1.38 V 1.38 V 1.44 V 1.44 V 94 94 94 94 94 12 12 84 84 TABLE ANGLE
(Degree)
-19.8
-13.0
-7.8
-10.8 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-18.4
-12.5
-3.6 74.0 54.0 78.2 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.92 4.92 10.65 10.65 19.45 19.45 CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.92 4.92 10.65 10.65 19.45 19.45 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5745.00
*5745.00 11490.00 11490.00
#17235.00
#17235.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5745.00
*5745.00 11490.00 11490.00
#17235.00
#17235.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 31 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 157 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0 78.2
-7.4
-11.1
-13.6 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-15.3
-9.3
-8.8
-3.6 TABLE ANGLE
(Degree) 22 22 18 49 49 60 60 103 103
(m) 1.15 H 1.15 H 1.05 H 1.29 H 1.29 H 1.09 H 1.09 H 1.03 H 1.03 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 66.6 PK 61.70 42.9 AV 38.00 64.6 PK 59.67 117.2 PK 112.25 107.6 AV 102.65 58.7 PK 48.02 44.7 AV 34.02 65.2 PK 45.44 50.4 AV 30.64 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 58.80 35.30 55.27 110.45 101.25 44.92 33.02 44.84 31.94 LEVEL
(dBuV/m) 63.7 PK 40.2 AV 60.2 PK 115.4 PK 106.2 AV 55.6 PK 43.7 AV 64.6 PK 51.7 AV
(m) 1.15 V 1.15 V 1.15 V 1.15 V 1.15 V 1.10 V 1.10 V 1.17 V 1.17 V 69 69 69 69 69 195 195 327 327 TABLE ANGLE
(Degree)
-18.4
-10.3
-9.4
-2.3 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-10.3
-13.8
-18.0 74.0 54.0 78.2 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.95 4.95 10.68 10.68 19.76 19.76 CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.95 4.95 10.68 10.68 19.76 19.76 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5785.00
*5785.00 11570.00 11570.00
#17355.00
#17355.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5785.00
*5785.00 11570.00 11570.00
#17355.00
#17355.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 32 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 165 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 78.2 74.0 54.0 74.0 54.0 74.0 54.0 3 3 3 3 3 66 66 119 119
-0.3
-12.5
-6.4
-16.6
-10.6
-8.3
-3.3
(m) 1.10 H 1.10 H 1.08 H 1.08 H 1.08 H 1.13 H 1.13 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 113.7 PK 108.72 104.4 AV 99.42 77.9 PK 72.88 61.5 PK 56.46 47.6 AV 42.56 57.4 PK 46.81 43.4 AV 32.81 65.7 PK 45.75 50.7 AV 30.75 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 107.42 98.12 69.18 52.96 38.36 44.71 31.51 43.15 30.25 LEVEL
(dBuV/m) 112.4 PK 103.1 AV 74.2 PK 58.0 PK 43.4 AV 55.3 PK 42.1 AV 63.1 PK 50.2 AV
(m) 1.10 V 1.10 V 1.10 V 1.10 V 1.10 V 1.11 V 1.11 V 1.14 V 1.14 V
-4.0
-16.0
-10.6
-18.7
-11.9
-10.9
-3.8 54 54 54 54 54 202 202 343 343 78.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.98 4.98 5.02 5.04 5.04 10.59 10.59 19.95 19.95 CORRECTION FACTOR
(dB/m) 4.98 4.98 5.02 5.04 5.04 10.59 10.59 19.95 19.95 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5825.00
*5825.00
#5850.00
#5860.00
#5860.00 11650.00 11650.00
#17475.00
#17475.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5825.00
*5825.00
#5850.00
#5860.00
#5860.00 11650.00 11650.00
#17475.00
#17475.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 33 of 65 Report Format Version 5.3.0 802.11ac (VHT20) CHANNEL TX Channel 36 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-3.3
-0.5 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-20.5
-12.0
-11.3
-4.5 TABLE ANGLE
(Degree) 52 52 52 52 274 274 27 27
(m) 1.57 H 1.57 H 1.57 H 1.57 H 1.04 H 1.04 H 1.20 H 1.20 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 70.7 PK 66.42 53.5 AV 49.22 113.9 PK 109.51 105.1 AV 100.71 53.5 PK 43.44 42.0 AV 31.94 62.7 PK 47.86 49.5 AV 34.66 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 63.62 47.92 108.61 99.61 47.44 35.54 45.76 33.16 LEVEL
(dBuV/m) 67.9 PK 52.2 AV 113.0 PK 104.0 AV 57.5 PK 45.6 AV 60.6 PK 48.0 AV
(m) 1.27 V 1.27 V 1.27 V 1.27 V 1.41 V 1.41 V 1.34 V 1.34 V TABLE ANGLE
(Degree) 62 62 62 62 11 11 80 80
-16.5
-8.4
-13.4
-6.0 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-6.1
-1.8
(dB) CORRECTION FACTOR
(dB/m) 4.28 4.28 4.39 4.39 10.06 10.06 14.84 14.84 CORRECTION FACTOR
(dB/m) 4.28 4.28 4.39 4.39 10.06 10.06 14.84 14.84 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5180.00
*5180.00
#10360.00
#10360.00 15540.00 15540.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5180.00
*5180.00
#10360.00
#10360.00 15540.00 15540.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 34 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 40 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-3.5
-3.7 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-19.3
-11.3
-11.4
-4.2 TABLE ANGLE
(Degree) 53 53 61 61 298 298 1 1
(m) 1.56 H 1.56 H 1.56 H 1.56 H 1.03 H 1.03 H 1.21 H 1.21 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 70.5 PK 66.29 50.3 AV 46.09 116.0 PK 111.56 106.3 AV 101.86 54.7 PK 44.63 42.7 AV 32.63 62.6 PK 47.54 49.8 AV 34.74 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 55.19 43.59 111.06 101.56 50.53 37.53 48.44 35.44 LEVEL
(dBuV/m) 59.4 PK 47.8 AV 115.5 PK 106.0 AV 60.6 PK 47.6 AV 63.5 PK 50.5 AV
(m) 1.18 V 1.18 V 1.18 V 1.18 V 1.24 V 1.24 V 1.00 V 1.00 V 83 83 83 83 346 346 360 360 TABLE ANGLE
(Degree)
-13.4
-6.4
-10.5
-3.5 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-14.6
-6.2 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.21 4.21 4.44 4.44 10.07 10.07 15.06 15.06 CORRECTION FACTOR
(dB/m) 4.21 4.21 4.44 4.44 10.07 10.07 15.06 15.06 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5122.00 5122.00
*5200.00
*5200.00
#10400.00
#10400.00 15600.00 15600.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5122.00 5122.00
*5200.00
*5200.00
#10400.00
#10400.00 15600.00 15600.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 35 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 48 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-12.9
-2.9 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-16.8
-6.7
-18.9
-11.1
-11.2
-3.5 15 15 15 15 314 314 311 311 36 36
(m) 1.09 H 1.09 H 1.06 H 1.06 H 1.28 H 1.28 H 1.02 H 1.02 H 1.18 H 1.18 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 61.1 PK 56.90 51.1 AV 46.90 117.3 PK 112.89 107.2 AV 102.79 57.2 PK 52.66 47.3 AV 42.76 55.1 PK 44.84 42.9 AV 32.64 62.8 PK 48.13 50.5 AV 35.83 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 56.20 44.00 110.19 101.39 52.06 41.86 50.04 36.74 48.93 35.73 LEVEL
(dBuV/m) 60.4 PK 48.2 AV 114.6 PK 105.8 AV 56.6 PK 46.4 AV 60.3 PK 47.0 AV 63.6 PK 50.4 AV
(m) 1.12 V 1.12 V 1.12 V 1.12 V 1.12 V 1.12 V 1.34 V 1.34 V 1.02 V 1.02 V 80 80 80 80 80 80 335 335 360 360
-17.4
-7.6
-13.7
-7.0
-10.4
-3.6 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m)
-13.6
-5.8 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.20 4.20 4.41 4.41 4.54 4.54 10.26 10.26 14.67 14.67 CORRECTION FACTOR
(dB/m) 4.20 4.20 4.41 4.41 4.54 4.54 10.26 10.26 14.67 14.67 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 5121.00 5121.00
*5240.00
*5240.00 5361.40 5361.40
#10480.00
#10480.00 15720.00 15720.00 NO. FREQ.
(MHz) 1 5121.00 2 5121.00 3
*5240.00 4
*5240.00 5 5361.40 6 5361.40 7
#10480.00 8
#10480.00 9 15720.00 10 15720.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 36 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 149 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0 78.2
-13.9
-9.7
-0.8 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-19.8
-11.4
-14.2
-8.3 TABLE ANGLE
(Degree) 12 12 12 11 11 324 324 28 28
(m) 1.09 H 1.09 H 1.09 H 1.10 H 1.10 H 1.02 H 1.02 H 1.20 H 1.20 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 60.1 PK 55.20 44.3 AV 39.40 77.4 PK 72.47 108.1 PK 103.18 98.8 AV 93.88 54.2 PK 43.55 42.6 AV 31.95 59.8 PK 40.35 45.7 AV 26.25 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 50.70 36.60 69.67 101.88 92.28 43.65 30.45 46.25 23.35 LEVEL
(dBuV/m) 55.6 PK 41.5 AV 74.6 PK 106.8 PK 97.2 AV 54.3 PK 41.1 AV 65.7 PK 42.8 AV
(m) 1.29 V 1.29 V 1.29 V 1.29 V 1.29 V 1.33 V 1.33 V 1.40 V 1.40 V 100 100 100 100 100 11 11 93 93 TABLE ANGLE
(Degree)
-19.7
-12.9
-8.3
-11.2 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-18.4
-12.5
-3.6 74.0 54.0 78.2 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.92 4.92 10.65 10.65 19.45 19.45 CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.92 4.92 10.65 10.65 19.45 19.45 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5745.00
*5745.00 11490.00 11490.00
#17235.00
#17235.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5745.00
*5745.00 11490.00 11490.00
#17235.00
#17235.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 37 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 157 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0 78.2
-6.9
-10.8
-14.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-16.0
-9.7
-9.5
-4.0 TABLE ANGLE
(Degree) 12 12 12 12 12 70 70 103 103
(m) 1.10 H 1.10 H 1.10 H 1.08 H 1.08 H 1.11 H 1.11 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 67.1 PK 62.20 43.2 AV 38.30 64.2 PK 59.27 116.8 PK 111.85 106.4 AV 101.45 58.0 PK 47.32 44.3 AV 33.62 64.5 PK 44.74 50.0 AV 30.24 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 58.60 35.30 55.57 109.25 100.75 44.92 32.92 44.64 31.64 LEVEL
(dBuV/m) 63.5 PK 40.2 AV 60.5 PK 114.2 PK 105.7 AV 55.6 PK 43.6 AV 64.4 PK 51.4 AV
(m) 1.12 V 1.12 V 1.12 V 1.12 V 1.12 V 1.06 V 1.06 V 1.19 V 1.19 V 79 79 79 79 79 160 160 323 323 TABLE ANGLE
(Degree)
-18.4
-10.4
-9.6
-2.6 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-10.5
-13.8
-17.7 74.0 54.0 78.2 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.95 4.95 10.68 10.68 19.76 19.76 CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.95 4.95 10.68 10.68 19.76 19.76 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5785.00
*5785.00 11570.00 11570.00
#17355.00
#17355.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5785.00
*5785.00 11570.00 11570.00
#17355.00
#17355.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 38 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 165 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 78.2 74.0 54.0 74.0 54.0 74.0 54.0 2 2 2 2 2 78 78 118 118
-0.8
-9.5
-5.8
-16.8
-10.8
-8.5
-3.4
(m) 1.07 H 1.07 H 1.08 H 1.08 H 1.08 H 1.18 H 1.18 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 112.5 PK 107.52 103.3 AV 98.32 77.4 PK 72.38 64.5 PK 59.46 48.2 AV 43.16 57.2 PK 46.61 43.2 AV 32.61 65.5 PK 45.55 50.6 AV 30.65 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 106.42 97.12 68.78 52.96 38.06 44.71 31.31 42.95 30.05 LEVEL
(dBuV/m) 111.4 PK 102.1 AV 73.8 PK 58.0 PK 43.1 AV 55.3 PK 41.9 AV 62.9 PK 50.0 AV
(m) 1.08 V 1.08 V 1.08 V 1.08 V 1.08 V 1.13 V 1.13 V 1.15 V 1.15 V
-4.4
-16.0
-10.9
-18.7
-12.1
-11.1
-4.0 53 53 53 53 53 195 195 350 350 78.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.98 4.98 5.02 5.04 5.04 10.59 10.59 19.95 19.95 CORRECTION FACTOR
(dB/m) 4.98 4.98 5.02 5.04 5.04 10.59 10.59 19.95 19.95 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5825.00
*5825.00
#5850.00
#5860.00
#5860.00 11650.00 11650.00
#17475.00
#17475.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5825.00
*5825.00
#5850.00
#5860.00
#5860.00 11650.00 11650.00
#17475.00
#17475.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 39 of 65 Report Format Version 5.3.0 802.11ac (VHT40) CHANNEL TX Channel 38 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-3.4
-0.1 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-23.7
-14.6
-13.9
-6.4 TABLE ANGLE
(Degree) 14 14 14 14 255 255 8 8
(m) 1.08 H 1.08 H 1.06 H 1.06 H 1.08 H 1.08 H 1.18 H 1.18 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 70.6 PK 66.32 53.9 AV 49.62 106.8 PK 102.39 97.0 AV 92.59 50.3 PK 40.23 39.4 AV 29.33 60.1 PK 45.15 47.6 AV 32.65 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 56.22 43.02 99.79 89.89 46.03 33.13 43.25 31.65 LEVEL
(dBuV/m) 60.5 PK 47.3 AV 104.2 PK 94.3 AV 56.1 PK 43.2 AV 58.2 PK 46.6 AV
(m) 1.44 V 1.44 V 1.44 V 1.44 V 1.46 V 1.46 V 1.27 V 1.27 V 102 102 102 102 12 12 50 50 TABLE ANGLE
(Degree)
-17.9
-10.8
-15.8
-7.4 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-13.5
-6.7 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.28 4.28 4.41 4.41 10.07 10.07 14.95 14.95 CORRECTION FACTOR
(dB/m) 4.28 4.28 4.41 4.41 10.07 10.07 14.95 14.95 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5190.00
*5190.00
#10380.00
#10380.00 15570.00 15570.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5190.00
*5190.00
#10380.00
#10380.00 15570.00 15570.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 40 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 46 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-2.5
-1.1 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-19.3
-11.1
-11.8
-3.6 TABLE ANGLE
(Degree) 11 11 14 14 312 312 50 50
(m) 1.00 H 1.00 H 1.21 H 1.21 H 1.08 H 1.08 H 1.16 H 1.16 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 71.5 PK 67.22 52.9 AV 48.62 112.3 PK 107.88 102.8 AV 98.38 54.7 PK 44.49 42.9 AV 32.69 62.2 PK 47.52 50.4 AV 35.72 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 55.92 43.82 103.88 94.38 49.19 36.29 47.52 34.62 LEVEL
(dBuV/m) 60.2 PK 48.1 AV 108.3 PK 98.8 AV 59.4 PK 46.5 AV 62.2 PK 49.3 AV
(m) 1.06 V 1.06 V 1.06 V 1.06 V 1.35 V 1.35 V 1.06 V 1.06 V 82 82 82 82 347 347 360 360 TABLE ANGLE
(Degree)
-14.6
-7.5
-11.8
-4.7 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-13.8
-5.9 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.28 4.28 4.42 4.42 10.21 10.21 14.68 14.68 CORRECTION FACTOR
(dB/m) 4.28 4.28 4.42 4.42 10.21 10.21 14.68 14.68 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5230.00
*5230.00
#10460.00
#10460.00 15690.00 15690.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5230.00
*5230.00
#10460.00
#10460.00 15690.00 15690.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 41 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 151 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN
-1.9
-0.3
-1.9 74.0 54.0 78.2 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-20.2
-13.2
-7.8
-10.6 TABLE ANGLE
(Degree) 13 13 13 13 13 27 27 75 75
(m) 1.10 H 1.10 H 1.10 H 1.10 H 1.10 H 1.34 H 1.34 H 1.48 H 1.48 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 72.1 PK 67.20 53.7 AV 48.80 76.3 PK 71.37 103.6 PK 98.67 94.3 AV 89.37 53.8 PK 43.14 40.8 AV 30.14 66.2 PK 46.68 43.4 AV 23.88 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 64.50 45.70 67.47 97.17 88.27 40.94 27.74 44.78 21.48 LEVEL
(dBuV/m) 69.4 PK 50.6 AV 72.4 PK 102.1 PK 93.2 AV 51.6 PK 38.4 AV 64.3 PK 41.0 AV
(m) 1.08 V 1.08 V 1.08 V 1.08 V 1.08 V 1.12 V 1.12 V 1.12 V 1.12 V 56 56 56 56 56 194 194 343 343 TABLE ANGLE
(Degree)
-22.4
-15.6
-9.7
-13.0 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 78.2
-4.6
-3.4
-5.8 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.93 4.93 10.66 10.66 19.52 19.52 CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.93 4.93 10.66 10.66 19.52 19.52 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5755.00
*5755.00 11510.00 11510.00
#17265.00
#17265.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5755.00
*5755.00 11510.00 11510.00
#17265.00
#17265.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 42 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 159 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 10 10 0 0 0 23 23 67 67 78.2 74.0 54.0 74.0 54.0 74.0 54.0
-0.4
-3.3
-1.0
-20.4
-13.4
-7.8
-10.7
(m) 1.09 H 1.09 H 1.07 H 1.07 H 1.07 H 1.33 H 1.33 H 1.49 H 1.49 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 110.6 PK 105.64 100.7 AV 95.74 77.8 PK 72.78 70.7 PK 65.66 53.0 AV 47.96 53.6 PK 42.91 40.6 AV 29.91 66.2 PK 46.34 43.3 AV 23.44 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 104.34 94.44 70.28 63.86 45.96 41.21 28.21 44.94 21.34 LEVEL
(dBuV/m) 109.3 PK 99.4 AV 75.3 PK 68.9 PK 51.0 AV 51.9 PK 38.9 AV 64.8 PK 41.2 AV
(m) 1.08 V 1.08 V 1.08 V 1.08 V 1.08 V 1.13 V 1.13 V 1.08 V 1.08 V
-2.9
-5.1
-3.0
-22.1
-15.1
-9.2
-12.8 29 29 29 29 29 203 203 339 339 78.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.96 4.96 5.02 5.04 5.04 10.69 10.69 19.86 19.86 CORRECTION FACTOR
(dB/m) 4.96 4.96 5.02 5.04 5.04 10.69 10.69 19.86 19.86 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5795.00
*5795.00
#5850.00
#5860.00
#5860.00 11590.00 11590.00
#17385.00
#17385.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5795.00
*5795.00
#5850.00
#5860.00
#5860.00 11590.00 11590.00
#17385.00
#17385.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 43 of 65 Report Format Version 5.3.0 802.11ac (VHT80) CHANNEL TX Channel 42 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-4.1
-0.1 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-24.3
-15.2
-14.8
-7.3 TABLE ANGLE
(Degree) 11 11 20 20 255 255 3 3
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.14 H 1.14 H 1.06 H 1.06 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 69.9 PK 65.62 53.9 AV 49.62 103.4 PK 98.97 92.3 AV 87.87 49.7 PK 39.59 38.8 AV 28.69 59.2 PK 44.26 46.7 AV 31.76 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 60.92 45.32 95.77 84.67 45.39 32.69 43.26 31.46 LEVEL
(dBuV/m) 65.2 PK 49.6 AV 100.2 PK 89.1 AV 55.5 PK 42.8 AV 58.2 PK 46.4 AV
(m) 1.42 V 1.42 V 1.42 V 1.42 V 1.43 V 1.43 V 1.26 V 1.26 V 100 100 100 100 10 10 49 49 TABLE ANGLE
(Degree)
-18.5
-11.2
-15.8
-7.6 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-8.8
-4.4
(dB) CORRECTION FACTOR
(dB/m) 4.28 4.28 4.43 4.43 10.11 10.11 14.94 14.94 CORRECTION FACTOR
(dB/m) 4.28 4.28 4.43 4.43 10.11 10.11 14.94 14.94 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5210.00
*5210.00
#10420.00
#10420.00 15630.00 15630.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5210.00
*5210.00
#10420.00
#10420.00 15630.00 15630.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 44 of 65 Report Format Version 5.3.0 CHANNEL TX Channel 155 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN
-1.8
-0.4
-5.4 74.0 54.0 78.2 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 78.2 74.0 54.0 74.0 54.0 74.0 54.0 14 14 14 9 9 14 14 14 42 42 78 78
-21.0
-17.8
-12.5
-21.6
-15.1
-9.7
-13.0
(m) 1.11 H 1.11 H 1.11 H 1.10 H 1.10 H 1.11 H 1.11 H 1.11 H 1.31 H 1.31 H 1.45 H 1.45 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 72.2 PK 67.30 53.6 AV 48.70 72.8 PK 67.87 101.1 PK 96.17 89.8 AV 84.87 57.2 PK 52.18 56.2 PK 51.16 41.5 AV 36.46 52.4 PK 41.73 38.9 AV 28.23 64.3 PK 44.61 41.0 AV 21.31 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 64.00 48.60 65.77 94.97 84.67 52.78 53.46 35.36 40.63 26.53 43.51 20.81 LEVEL
(dBuV/m) 68.9 PK 53.5 AV 70.7 PK 99.9 PK 89.6 AV 57.8 PK 58.5 PK 40.4 AV 51.3 PK 37.2 AV 63.2 PK 40.5 AV
(m) 1.21 V 1.21 V 1.21 V 1.19 V 1.19 V 1.21 V 1.21 V 1.21 V 1.10 V 1.10 V 1.06 V 1.06 V 66 66 66 65 65 66 66 66 209 209 351 351
-20.4
-15.5
-13.6
-22.7
-16.8
-10.8
-13.5 78.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) 74.0 54.0 78.2
-5.1
-0.5
-7.5 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.93 4.93 5.02 5.04 5.04 10.67 10.67 19.69 19.69 CORRECTION FACTOR
(dB/m) 4.90 4.90 4.93 4.93 4.93 5.02 5.04 5.04 10.67 10.67 19.69 19.69 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 11 12
#5715.00
#5715.00
#5725.00
*5775.00
*5775.00
#5850.00
#5860.00
#5860.00 11550.00 11550.00
#17325.00
#17325.00 NO. FREQ.
(MHz)
#5715.00
#5715.00
#5725.00
*5775.00
*5775.00
#5850.00
#5860.00
#5860.00 11550.00 11550.00
#17325.00
#17325.00 1 2 3 4 5 6 7 8 9 10 11 12 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF141117E18-1 45 of 65 Report Format Version 5.3.0 4.3 TRANSMIT POWER MEASUREMENT 4.3.1 LIMITS OF TRANSMIT POWER MEASUREMENT Operation Band U-NII-1 U-NII-2A U-NII-2C U-NII-3 EUT Category LIMIT Outdoor Access Point 1 Watt (30 dBm)
(Max. e.i.r.p 125mW(21 dBm) at any elevation angle above 30 degrees as measured from the horizon) Fixed point-to-point Access Point Indoor Access Point Mobile and Portable client device 1 Watt (30 dBm) 1 Watt (30 dBm) 250mW (24 dBm)
---
---
---
250mW (24 dBm) or 11 dBm+10 log B*
250mW (24 dBm) or 11 dBm+10 log B*
1 Watt (30 dBm) Note: Where B is the 26dB emission bandwidth in MHz. Per KDB 662911 D01 Multiple Transmitter Output Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT 4;
Array Gain = 0 dB (i.e., no array gain) for channel widths 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT 5. For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB. 4.3.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP 40 100060 May 08, 2014 May 07, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : Dec. 17, 2014 Report No.: RF141117E18-1 46 of 65 Report Format Version 5.3.0 4.3.3 TEST PROCEDURE Method PM is used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value. 4.3.4 DEVIATION FROM TEST STANDARD No deviation 4.3.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER 4.3.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at specific channel frequencies individually. Report No.: RF141117E18-1 47 of 65 Report Format Version 5.3.0 4.3.7 TEST RESULTS CHANNEL FREQUENCY
(MHz) AVERAGE POWER (dBm) CHAIN 1 CHAIN 0 TOTAL POWER
(mW) TOTAL POWER
(dBm) POWER LIMIT (dBm) PASS /
FAIL 802.11a 36 40 48 149 157 165 5180 5200 5240 5745 5785 5825 802.11ac (VHT20) 36 40 48 149 157 165 5180 5200 5240 5745 5785 5825 802.11ac (VHT40) 38 46 151 159 5190 5230 5755 5795 802.11ac (VHT80) 42 155 5210 5775 19.05 21.97 22.01 16.69 21.78 18.74 19.07 21.71 21.82 16.39 21.62 18.11 13.07 18.01 15.01 18.85 12.51 13.58 19.22 21.73 21.69 16.61 21.52 18.21 19.25 21.05 21.11 16.42 21.34 18.19 13.38 18.56 15.24 18.81 163.913 306.334 306.426 92.48 292.567 141.039 164.864 275.602 281.177 87.404 281.355 130.631 42.054 135.02 65.116 152.769 12.31 13.61 34.846 45.764 22.15 24.86 24.86 19.66 24.66 21.49 22.17 24.40 24.49 19.42 24.49 21.16 16.24 21.30 18.14 21.84 15.42 16.61 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Report No.: RF141117E18-1 48 of 65 Report Format Version 5.3.0 4.4 PEAK POWER SPECTRAL DENSITY MEASUREMENT 4.4.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT Operation EUT Category LIMIT Band U-NII-1 U-NII-2A U-NII-2C U-NII-3 Outdoor Access Point Fixed point-to-point Access Point 17dBm/ MHz Indoor Access Point Mobile and Portable client device
---
---
---
11dBm/ MHz 11dBm/ MHz 11dBm/ MHz 30dBm/ 500kHz 4.4.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP 40 100060 May 08, 2014 May 07, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : Dec. 17, 2014 Report No.: RF141117E18-1 49 of 65 Report Format Version 5.3.0 4.4.3 TEST PROCEDURES For U-NII-1:
1. Set span to encompass the entire emission bandwidth (EBW) of the signal. 2. Set RBW = 1 MHz, Set VBW 3 MHz, Detector = RMS 3. Sweep time = auto, trigger set to free run. 4. Trace average at least 100 traces in power averaging mode. 5. Record the max value and for duty cycle of test signal is < 98% add 10 log
(1/duty cycle) For U-NII-3:
1. Set span to encompass the entire emission bandwidth (EBW) of the signal. 2. Set RBW = 300 kHz, Set VBW 1 MHz, Detector = RMS 3. Use the peak marker function to determine the maximum power level in any 300 kHz band segment within the fundamental EBW. 4. Scale the observed power level to an equivalent value in 500 kHz by adjusting (reducing) the measured power by a bandwidth correction factor
(BWCF) where BWCF = 10log(500 kHz/300kHz) 5. Sweep time = auto, trigger set to free run. 6. Trace average at least 100 traces in power averaging mode. 7. Record the max value Report No.: RF141117E18-1 50 of 65 Report Format Version 5.3.0 4.4.4 DEVIATION FROM TEST STANDARD No deviation 4.4.5 TEST SETUP 4.4.6 EUT OPERATING CONDITIONS Same as 4.3.6 Attenuator EUT SPECTRUM ANALYZER Report No.: RF141117E18-1 51 of 65 Report Format Version 5.3.0 4.4.7 TEST RESULTS For U-NII-1:
802.11a CHANNEL 36 40 48 CHANNEL FREQUENCY
(MHz) 5180 5200 5240 802.11ac (VHT20) 36 40 48 5180 5200 5240 802.11ac (VHT40) 38 46 5190 5230 802.11ac (VHT80) PSD (dBm) CHAIN 0 5.66 8.64 7.95 4.88 7.55 7.38
-4.08 0.65 CHAIN 1 4.80 7.82 7.81 4.52 7.61 7.35
-2.85 1.86 TOTAL POWER DENSITY (dBm) MAX. LIMIT
(dBm) PASS /
FAIL 8.26 11.26 10.89 7.71 10.59 10.38
-0.41 4.31 16.48 16.48 16.48 16.48 16.48 16.48 16.48 16.48 PASS PASS PASS PASS PASS PASS PASS PASS CHANNEL CHANNEL FREQUENCY
(MHz) PSD W/O DUTY FACTOR
(dBm) CHAIN 0 CHAIN 1 DUTY FACTOR
(dB) TOTAL PSD WITH DUTY FACTOR
(dBm) MAX. LIMIT
(dBm) PASS /
FAIL 42 5210
-7.94
-6.68 0.14
-4.11 16.48 PASS Note : 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.52dBi > 6dBi , so the power density limit shall be reduced to 17-(6.52-6) = 16.48dBm. 3. Refer to section 3.4 for duty cycle spectrum plot. Report No.: RF141117E18-1 52 of 65 Report Format Version 5.3.0 802.11a / Chain(0) : CH40 802.11ac (VHT20) / Chain(1) : CH40 SPECTRUM PLOT OF WORST VALUE 802.11ac (VHT40) / Chain(1) : CH46 802.11ac (VHT80) / Chain(1) : CH42 Report No.: RF141117E18-1 53 of 65 Report Format Version 5.3.0 For U-NII-3:
802.11a CHAIN CHANNEL FREQUENCY TX
(MHz) 5745 5785 5825 5745 5785 5825 0 1 149 157 165 149 157 165 802.11ac (VHT20) 0 1 149 157 165 149 157 165 802.11ac (VHT40) 151 159 151 159 0 1 5745 5785 5825 5745 5785 5825 5755 5795 5755 5795 PSD
(dBm/300kHz) PSD
(dBm/500kHz)
-4.14 0.46
-1.76
-4.68 0.14
-2.55
-4.61
-0.02
-2.57
-5.06
-0.35
-2.84
-9.58
-5.98
-10.01
-6.06
-1.92 2.68 0.46
-2.46 2.36
-0.33
-2.39 2.20
-0.35
-2.84 1.87
-0.62
-7.36
-3.76
-7.79
-3.84 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 3.01 3.01 3.01 3.01 3.01 3.01 3.01 3.01 3.01 3.01 TOTAL PSD
(dBm/500kHz) LIMIT
(dBm/500kHz) 1.09 5.69 3.47 0.55 5.37 2.68 0.62 5.21 2.66 0.17 4.88 2.39
-4.35
-0.75
-4.78
-0.83 29.79 29.79 29.79 29.79 29.79 29.79 29.79 29.79 29.79 29.79 29.79 29.79 29.79 29.79 29.79 29.79 PASS
/FAIL PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Note : 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.21dBi > 6dBi , so the power density limit shall be reduced to 30-(6.21-6) = 29.79dBm. Report No.: RF141117E18-1 54 of 65 Report Format Version 5.3.0 802.11ac (VHT80) TX CHAIN CHANNEL FREQUENCY
(MHz) PSD W/O DUTY FACTOR
(dBm/300kHz) (dBm/500kHz) 10 log
(N=2) dB DUTY FACTOR
(dB) TOTAL PSD WITH DUTY FACTOR
(dBm/500kHz) LIMIT
(dBm/500kHz) PASS
/FAIL 155 155 5775 5775
-13.76
-13.99
-11.54
-11.77 3.01 3.01 0.14 0.14
-8.39
-8.62 29.79 PASS 29.79 PASS 0 1 Note : 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 6.21dBi > 6dBi , so the power density limit shall be reduced to 30-(6.21-6) = 29.79dBm. 3. Refer to section 3.4 for duty cycle spectrum plot. 802.11a / Chain(0) : CH157 802.11ac (VHT20) / Chain(0) : CH157 SPECTRUM PLOT OF WORST VALUE 802.11ac (VHT40) / Chain(0) : CH159 802.11ac (VHT80) / Chain(0) : CH155 Report No.: RF141117E18-1 55 of 65 Report Format Version 5.3.0 4.5 FREQUENCY STABILITY 4.5.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT The frequency of the carrier signal shall be maintained within band of operation 4.5.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Temperature &
Humidity Chamber GIANTFORCE Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 05, 2014 July 04, 2015 GTH-150-40-SP
-AR MAA0812-008 Jan. 13, 2014 Jan. 12, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : Dec. 17, 2014 4.5.3 TEST PROCEDURE 1. The EUT was placed inside the environmental test chamber and powered by nominal AC voltage. 2. Turn the EUT on and couple its output to a spectrum analyzer. 3. Turn the EUT off and set the chamber to the highest temperature specified. 4. Allow sufficient time (approximately 30 min) for the temperature of the chamber to stabilize, turn the EUT on and measure the operating frequency after 2, 5, and 10 minutes. 5. Repeat step 2 and 3 with the temperature chamber set to the lowest temperature. 6. The test chamber was allowed to stabilize at +20 degree C for a minimum of 30 minutes. The supply voltage was then adjusted on the EUT from 85% to 115% and the frequency record. Report No.: RF141117E18-1 56 of 65 Report Format Version 5.3.0 4.5.4 DEVIATION FROM TEST STANDARD No deviation Temperature Spectrum Analyzer 4.5.5 TEST SETUP AC Power Supply 4.5.6 EUT OPERATING CONDITION Set the EUT transmit at un-modulation mode to test frequency stability. Report No.: RF141117E18-1 57 of 65 Report Format Version 5.3.0 4.5.7 TEST RESULTS FREQUEMCY STABILITY VERSUS TEMP. OPERATING FREQUENCY: 5240MHz 0 MINUTE 2 MINUTE 5 MINUTE 10 MINUTE TEMP.
() POWER SUPPLY
(Vac) Measured Frequency Frequency Drift Measured Frequency Frequency Drift Measured Frequency Frequency Drift Measured Frequency Frequency Drift
(MHz)
%
(MHz)
%
(MHz)
%
(MHz)
%
120 120 120 120 120 120 120 120 120 5240.0198 0.00038 5240.0217 0.00041 5240.0235 0.00045 5240.0204 0.00039 5240.0086 0.00016 5240.0134 0.00026 5240.0127 0.00024 5240.0101 0.00019 5240.0103 0.00020 5240.0094 0.00018 5240.0086 0.00016 5240.0068 0.00013 5240.0212 0.00040 5240.0223 0.00043 5240.0202 0.00039 5240.0248 0.00047 5240.0248 0.00047 5240.0268 0.00051 5240.0259 0.00049 5240.0275 0.00052 5240.0035 0.00007 5240.0041 0.00008 5240.0024 0.00005 5240.0019 0.00004 5240.0171 0.00033 5240.0163 0.00031 5240.0174 0.00033 5240.0136 0.00026 5239.9745
-0.00049 5239.9751
-0.00048 5239.9781
-0.00042 5239.9779
-0.00042 5240.0154 0.00029 5240.015 0.00029 5240.0156 0.00030 5240.0133 0.00025 50 40 30 20 10 0
-10
-20
-30 FREQUEMCY STABILITY VERSUS VOLTAGE OPERATING FREQUENCY: 5240MHz 0 MINUTE 2 MINUTE 5 MINUTE 10 MINUTE Measured Frequency Frequency Drift Measured Frequency Frequency Drift Measured Frequency Frequency Drift Measured Frequency Frequency Drift
(MHz)
%
(MHz)
%
(MHz)
%
(MHz)
%
5240.0203 0.00039 5240.022 0.00042 5240.0202 0.00039 5240.0257 0.00049 5240.0212 0.00040 5240.0223 0.00043 5240.0202 0.00039 5240.0248 0.00047 5240.0213 0.00041 5240.0231 0.00044 5240.0192 0.00037 5240.0251 0.00048 TEMP.
() POWER SUPPLY
(Vac) 138 120 102 20 Report No.: RF141117E18-1 58 of 65 Report Format Version 5.3.0 4.6 6dB BANDWIDTH MEASUREMENT 4.6.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.6.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 05, 2014 July 04, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 24, 2014 4.6.3 TEST PROCEDURE 1. Set resolution bandwidth (RBW) = 100kHz. 2. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. 3. Trace mode = max hold. 4. Sweep = auto couple. 5. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.6.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF141117E18-1 59 of 65 Report Format Version 5.3.0 4.6.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER 4.6.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF141117E18-1 60 of 65 Report Format Version 5.3.0 4.6.7 TEST RESULTS CHANNEL 802.11a 149 157 165 802.11ac (VHT20) 149 157 165 802.11ac (VHT40) 151 159 802.11ac (VHT80) 155 CHANNEL FREQUENCY
(MHz) 6dB BANDWIDTH (MHz) CHAIN 0 CHAIN 1 MINIMUM LIMIT (MHz) PASS / FAIL 5745 5785 5825 5745 5785 5825 5755 5795 5775 16.04 16.38 15.80 16.45 17.63 16.58 35.32 35.24 16.08 16.37 16.06 16.36 17.57 16.33 35.25 35.23 75.40 75.44 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 PASS PASS PASS PASS PASS PASS PASS PASS PASS Report No.: RF141117E18-1 61 of 65 Report Format Version 5.3.0 802.11a / Chain(0) : CH165 802.11ac (VHT20) / Chain(1) : CH165 SPECTRUM PLOT OF WORST VALUE 802.11ac (VHT40) / Chain(1) : CH159 802.11ac (VHT80) / Chain(0) : CH155 Report No.: RF141117E18-1 62 of 65 Report Format Version 5.3.0 5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF141117E18-1 63 of 65 Report Format Version 5.3.0 6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab:
Tel: 886-2-26052180 Fax: 886-2-26052943 Hwa Ya EMC/RF/Safety Lab:
Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF/Telecom Lab:
Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also. Report No.: RF141117E18-1 64 of 65 Report Format Version 5.3.0 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test.
--- END ---
Report No.: RF141117E18-1 65 of 65 Report Format Version 5.3.0
1 2 3 | Test Setup Photos | Test Setup Photos | 639.65 KiB | January 29 2015 / July 28 2015 |
PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 141117E18 1 of 4 RADIATED EMISSION TEST (Below 1GHz) Report No.: 141117E18 2 of 4 RADIATED EMISSION TEST (For 2.4GHz_Above 1GHz) Report No.: 141117E18 3 of 4 RADIATED EMISSION TEST (For 5GHz_Above 1GHz) Report No.: 141117E18 4 of 4
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-08-26 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
2 | 2015-01-29 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
3 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2015-08-26
|
||||
1 2 3 |
2015-01-29
|
|||||
1 2 3 | Applicant's complete, legal business name |
Netgear Incorporated
|
||||
1 2 3 | FCC Registration Number (FRN) |
0022158786
|
||||
1 2 3 | Physical Address |
350 East Plumeria Drive
|
||||
1 2 3 |
San Jose, California 95134
|
|||||
1 2 3 |
San Jose, CA
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
PY3
|
||||
1 2 3 | Equipment Product Code |
14400298
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
D**** K********
|
||||
1 2 3 | Telephone Number |
40889********
|
||||
1 2 3 | Fax Number |
40890********
|
||||
1 2 3 |
d******@netgear.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 2 3 | Name |
H****** C******
|
||||
1 2 3 | Physical Address |
81-1, Lu Laio Keng, 9th Ling, Wu Lung Tsuen, Chiun
|
||||
1 2 3 |
Hsinchu Hsien, 307
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
h******@tw.bureauveritas.com
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 2 3 | Name |
A******** W********
|
||||
1 2 3 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 2 3 |
Taoyuan Hsien, 307
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
a******@tw.bureauvertias.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/25/2015 | ||||
1 2 3 | 07/28/2015 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC750 WiFi Range Extender | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 3 | No | |||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Class II Permissive Change for adding U-NII-2A and 2C DFS bands. Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. | ||||
1 2 3 | Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode. | |||||
1 2 3 | Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz and 40 MHz bandwidth mode. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 2 3 |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
|||||
1 2 3 | Name |
R****** C****
|
||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 |
+886-******** Extension:
|
|||||
1 2 3 | Fax Number |
886 3********
|
||||
1 2 3 |
+886-********
|
|||||
1 2 3 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.306 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 38 CC MO | 5745 | 5825 | 0.293 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | 38 CC MO ND | 5260 | 5320 | 0.247 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | 38 CC MO ND | 5500 | 5700 | 0.249 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.306 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC MO | 5745 | 5825 | 0.293 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.6170000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC