FCC ID: PY322400578 Mesh WiFi 6E Satellite

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6634248.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Quick Start 1 Download the Nighthawk app to install your mesh system 2 Secure your devices with NETGEAR ArmorTM On your mobile phone, scan the QR code to download the Nighthawk app and follow the setup instructions. NETGEAR Armor protects your familys WiFi with an automatic shield of security across your connected devices. Your Nighthawk comes with a one-year Armor subscription. Tap the Security tile in your Nighthawk app to verify that your subscription is activated. 3 Do more with the app Check out everything you can do on the Nighthawk app! Pause the Internet, run a speed test, set smart parental controls, and more.

(Availability of software services can vary by region.) Contents Router x1 Overview Satellite x1 (MK92) x2 (MK93) Ethernet Cable x1 Power Adapter

(varies by region) x2 (MK92) x3 (MK93) 1 Status LED A Sync button B Reset button C Ethernet LAN ports D Internet port E Power connector Troubleshooting If youre having problems with the installation, try the following:

> SET UP A NEW NIGHTHAWK SYSTEM to install your new router. If you already own another NETGEAR router and you used the Nighthawk app before, go to the dashboard and tap Turn off your modem and router and disconnect them. Reboot your modem. Reconnect your router to your modem and try installing with the Nighthawk app again. If youre still unable to install your router using the Nighthawk app, manually install it using the router web interface at http://www.routerlogin.net. For more information, visit netgear.com/meshhelp. Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal Si ce produit est vendu au Canada, vous pouvez accder ce document en franais canadien https://www.netgear. com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.) For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. For NETGEARs Privacy Policy, visit https://www.netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEARs Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period. Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. 1 A B C D E A B C E Router or Satellite Router Satellite NETGEAR INTERNATIONAL LTD Floor 6, Penrose Two, Penrose Dock, Cork, T23 YY09, Ireland NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only. February 2023

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6634251.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. a. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. b. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. This device cannot operate as a subordinate between separate buildings or structures. Operations in the 5.15-5.25GHz, 5.850-5.895GHz and 5.925 GHz -7.125GHz band are restricted to indoor usage only.

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6635106.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-06-01 FCC ID: PY322400578 To the attention of:

Federal Communications Commission Authorization and Evaluation Division Declaration Letter for Indoor Subordinate Devices (6PP) We, NETGEAR, INC., attest that this device under FCC ID: PY322400578 complies with device protocol requirements and operational restrictions for Indoor Subordinate Devices (6PP). a) This device will always be under the control of a low-power indoor AP and will only initiate brief messages to be under the control of an indoor low-power AP. These brief messages will only occur if the subordinate has detected a low-power indoor AP operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. b) Once under control of an indoor access point, this device will initiate connections with clients, other access points, or other subordinate devices at a lower power or equal to the power advertised by the access point controlling this device and never above the maximum output power allowed by the FCC grant for equipment class 6PP c) The method this device uses to inform the associated client/subordinate of its permitted maximum power is as follows:

An 11ax IEEE AP's Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. d) This device employs a Contention-Based Protocol as demonstrated in the test report. e) This Subordinate device operates in the 5.925-7.125 GHz band. It is supplied power from a wired connection, has an integrated antenna, is not battery-powered, does not have a weatherized enclosure, and has no direct connection to the internet. f) We acknowledge this device is subject to and in full compliance with the device restrictions listed below. All users are notified of these restrictions through the user manual. The operation of this device will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that this device's operation is permitted in large aircraft while flying above 10,000 feet. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you!

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Sincerely yours,

David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6634799.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6634800.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-06-01 FCC ID: PY322400578 To the attention of:

Federal Communications Commission Authorization and Evaluation Division Declaration Letter for Subordinate Devices We, NETGEAR, INC., attest that this device under FCC ID: PY322400578 complies with device protocol requirements and operational restrictions for Subordinate Devices. a) Subordinates cannot act as a standalone master device as defined Section 15.202 and must act as a contingent device under Section 15.202 subservient to an indoor access point within the same building or structure. b) The subordinate passively scans or listens in the U-NII-4 or U-NII -3 & -4 span channels for an indoor access point available channel, c) Permitted to initiate a brief probe message requesting to join and associated with a specific access point. d) This Subordinate device operates in the 5.850-5.895 GHz band. It is supplied power from a wired connection, has an integrated antenna, is not battery-powered, does not have a weatherized enclosure, and has no direct connection to the internet. e) We acknowledge this device is subject to and in full compliance with the device restrictions listed below. All users are notified of these restrictions through the user manual. Subordinate device operating in the 5.850-5.895 GHz band shall be supplied power from a wired connection, has an integrated antenna, is not battery powered, and does not have a weatherized enclosure. This device's operation will not be allowed on cars, trains, boats, and aircraft. A statement in a conspicuous location on the device and the user's manual: FCC regulations restrict the operation of this device to indoor use only. & This device cannot operate as a subordinate between separate buildings or structures. & Section 15.19 Statement (if not on the device). If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you!

Sincerely yours,

David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6634151.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: March 16, 2023 We, NETGEAR, INC. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: PY322400578 If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com