all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 1.41 MiB | ||||
1 |
|
user manual statement | Users Manual | 575.64 KiB | May 05 2014 | |||
1 |
|
internal photos | Internal Photos | 1.46 MiB | ||||
1 |
|
external photos | External Photos | 2.09 MiB | ||||
1 |
|
label | ID Label/Location Info | 286.00 KiB | May 05 2014 | |||
1 |
|
label location | ID Label/Location Info | 85.82 KiB | / May 05 2014 | |||
1 |
|
Power of Attorney Letter | Cover Letter(s) | 116.14 KiB | / May 05 2014 | |||
1 |
|
RF exposure | RF Exposure Info | 237.13 KiB | / May 05 2014 | |||
1 |
|
ad hoc declaration letter | Cover Letter(s) | 152.38 KiB | / May 05 2014 | |||
1 | block diagram | Block Diagram | April 29 2014 | confidential | ||||
1 | operational description | Operational Description | April 29 2014 | confidential | ||||
1 |
|
request for confidentiality | Cover Letter(s) | 131.62 KiB | / May 05 2014 | |||
1 | schematics | Schematics | April 29 2014 | confidential | ||||
1 |
|
test report | Test Report | 3.69 MiB | / May 05 2014 | |||
1 |
|
test setup photos | Test Setup Photos | 311.71 KiB | ||||
1 | Cover Letter(s) | April 29 2014 / May 05 2014 |
1 | user manual | Users Manual | 1.41 MiB |
N300 Wireless Router User Manual Models:
JWNR2010v5 WNR2020 WNR614 April 2014 202-11392-01 350 East Plumeria Drive San Jose, CA 95134 USA N300 Wireless Router Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. Phone (US & Canada only): 1-888-NETGEAR. Phone (Other Countries): Check the list of phone numbers at http://support.netgear.com/general/contact/default.aspx. Compliance For regulatory compliance information, visit http://www.netgear.com/about/regulatory. See the regulatory compliance document before connecting the power supply. Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. NETGEAR, Inc. All rights reserved. 2 Contents Chapter 1 Hardware Setup Hardware Features . 7 Front Panel LEDs . 7 Back Panel . 7 Position Your Router . 8 Cable Your Router . 9 Verify the Cabling . 10 Chapter 2 Connect to the Network and Access the Router Connect to the Network. 12 Wired Connection . 12 WiFi Connection . 12 Types of Logins . 13 Use a Web Browser to Access the Router . 13 NETGEAR genie Automatic Internet Setup . 13 Log In to the Router . 14 Chapter 3 Specify Your Internet Settings Use the Internet Setup Wizard . 17 Manually Set Up the Internet Connection . 18 Specify an Internet Connection Without a Login. 18 Specify an Internet Connection That Uses a Login . 19 Change the MTU Size . 21 Chapter 4 Networking View or Change WAN Settings . 25 Set Up a Default DMZ Server . 26 Change the Routers Device Name . 27 Change the LAN TCP/IP Settings . 28 Specify the IP Addresses that the Router Assigns . 30 Disable the DHCP Server Feature in the Router . 31 Reserve LAN IP Addresses . 31 Use the WPS Wizard for WiFi Connections . 33 Specify Basic WiFi Settings . 34 Change the WiFi Security Option . 36 Set Up a Guest Network. 37 Control the Wireless Radio. 38 Enable or Disable the Wireless Radio . 38 3 N300 Wireless Router Set Up a Wireless Schedule . 39 Set up a Wireless Access List . 40 Specify WPS Settings . 42 Wireless Distribution System. 42 Set Up the Base Station . 43 Set Up a Repeater . 44 Static Routes . 46 View Devices Currently on the Network . 48 Improve Network Connections with Universal Plug and Play. 49 Chapter 5 Manage Your Network Update the Router Firmware . 52 Change the admin Password . 53 Recover the admin Password. 53 View Router Status . 54 View the Internet Connection Settings . 55 Display Internet Port Statistics . 56 View the Internet Connection Status. 57 View Wireless Settings . 59 View Guest Network Settings . 60 Reboot the Router. 61 Manage the Configuration File . 61 Back Up Settings . 61 Restore Configuration Settings. 62 Erase Configuration Settings. 63 Chapter 6 Troubleshooting Forgotten Passwords. 65 admin Password . 65 WiFi Passwords . 65 WiFi Connections. 66 Changes Not Saved . 67 Troubleshoot with the LEDs . 67 Apply Power to the Router and Check the LEDs . 67 All LEDs Remain Lit . 67 Power LED Is Off or Blinking. 68 Power LED Stays Amber . 68 Internet LEDs Is Off . 68 WiFi LED Is Off . 68 Cannot Log In to the Router . 69 The Router Cannot Access the Internet . 69 Troubleshoot Internet Browsing . 70 Troubleshoot a PPPoE Internet Connection . 71 Troubleshoot Your Network Using the Ping Utility . 72 Test the LAN Path to Your Router. 72 Test the Path from Your Computer to a Remote Device . 73 4 N300 Wireless Router Troubleshoot IP Addresses . 73 Appendix A Supplemental Information Factory Settings. 76 Technical Specifications . 77 5 1. Hardware Setup 1 If you have not already set up your new router using the installation guide that comes in the box, this chapter walks you through the hardware setup. This chapter contains the following sections:
Hardware Features Position Your Router Cable Your Router Verify the Cabling For more information about the topics covered in this manual, visit the support website at http://support.netgear.com. Firmware updates with new features and bug fixes are made available from time to time at downloadcenter.netgear.com. Some products can regularly check the site and download new firmware, or you can check for and download new firmware manually. If the features or behavior of your product does not match what is described in this guide, you might need to update your firmware. 6 N300 Wireless Router Hardware Features Before you cable your router, take a moment to become familiar with the product label and the front and back panels. Pay particular attention to the LEDs on the front panel. Front Panel LEDs The router front panel has the following status LEDs. Table 1. Front panel LED descriptions LED Power Internet WiFi Description Solid green. The power is on, and the router is ready. Blinking green. A firmware update is in progress. Off. Power is not supplied to the router. Solid green. An IP address was received; the router is ready to transmit data. Off. No Ethernet cable is connected between the router and the modem. Solid green. The wireless radio is operating. Off. The wireless radio is off. Ethernet ports 14 Solid green. The Ethernet port has detected a 100 Mbps link with an attached device. Off. The Ethernet port has not detected a link with an attached device. Back Panel The back panel has the following ports, button, and connector. Table 2. Back panel port, button, and connector descriptions Port or Connector Description Ethernet ports Internet port Four local area networks (LAN) Ethernet ports for connecting the router to your local computers. Ethernet port for connecting the router to a cable broadband modem or DSL broadband modem. The Internet port is also referred to as the WAN port. AC power connector AC power connector to connect the power adapter to the router. WPS/Reset button This button is a WPS and Reset button:
WPS button to connect computer or WiFi devices to the routers network. For more information, see WiFi Connection on page 12. Reset button to return the router to its factory settings. 76. For more information, see Factory Settings on page Hardware Setup 7 N300 Wireless Router Position Your Router The router lets you access your network anywhere within the operating range of your wireless network. However, the operating distance or range of your wireless connection can vary significantly depending on the physical placement of your router. For example, the thickness and number of walls the wireless signal passes through can limit the range. Additionally, other wireless access points in and around your home might affect your routers signal. Wireless access points are routers, repeaters, WiFi range extenders, or any other device that emits a wireless signal for network access. To position your router:
1. Place your router near the center of the area where your computers and other devices operate, and within line of sight to your wireless devices. 2. Make sure that the router is within reach of an AC power outlet and near Ethernet cables for wired computers. 3. Place the router in an elevated location, minimizing the number walls and ceilings between the router and your other devices. 4. Place the router away from electrical devices such as these:
Ceiling fans Home security systems Microwaves Computers Base of a cordless phone 2.4 GHz cordless phone 5. Place the router away from large metal surfaces, large glass surfaces, and insulated walls such as these:
Solid metal doors Aluminum studs Mirrors Brick Concrete Fish tanks To prepare your router for installation:
1. Carefully peel off the protective film covering your router. 2. Place your router in a suitable area for installation (near an AC power outlet and accessible to the Ethernet cables for your wired computers). Hardware Setup 8 N300 Wireless Router Cable Your Router The installation guide that came in the box has more details about installation.The following illustration shows typical cable connections for a router. Internet Ethernet cable Modem Router Your router might look different than the router shown in this diagram. Ethernet cable
(not included) Figure 1. Router cable connections To cable your router:
1. Prepare your modem. Unplug your modems power. If it has a battery backup, remove the battery. 2. Connect the modem. Plug in your modem. Put the battery back in. Then cable the modem to the routers Internet port 3. Connect the power adapter cord that came in the package to the power input on the rear panel of the router and plug it in to an electrical outlet. The Power LED lights. 4. Connect a computer or wireless device. You have two options:
Connect with WiFi. To connect with WiFi, use the WiFi network name and password on the product label. Connect with an Ethernet cable. Use an Ethernet cable to connect a computer to one of the Ethernet LAN ports on the rear panel of the router. Hardware Setup 9 N300 Wireless Router Verify the Cabling Verify that your router is cabled correctly and the cables are attached securely by checking the router LEDs:
The Power LED The WiFi LED The Internet LED The Ethernet LEDs (1 through 4) computers cabled to the router by an Ethernet cable. is lit solid green when the router is turned on. are lit solid green or solid amber for any is lit solid green. is lit solid green. For information about troubleshooting with the LEDs, see Troubleshoot with the LEDs on page 67. Hardware Setup 10 2. Connect to the Network and Access the Router 2 This chapter contains the following sections:
Connect to the Network Use a Web Browser to Access the Router Types of Logins 11 N300 Wireless Router Connect to the Network You can connect to the routers network through a wired or WiFi connection. If you set up your computer to use a static IP address, change the settings so that it uses Dynamic Host Configuration Protocol (DHCP). Wired Connection You can connect your computer to the router using an Ethernet cable and join the routers local area network (LAN). To connect your computer to the router with an Ethernet cable:
1. Make sure that the router has power (its Power LED is lit). 2. Connect an Ethernet cable to an Ethernet port on your computer. 3. Connect the other end of the Ethernet cable to one of the numbered Ethernet ports. Your computer connects to the local area network (LAN). A message might display on your computer screen to notify you that an Ethernet cable is connected. WiFi Connection You can connect to the routers WiFi network with Wi-Fi Protected Setup (WPS) or you can find and select the WiFi network. To use WPS to connect to the WiFi network:
1. Make sure that the router has power (its Power LED is lit). 2. Check the WPS instructions for your computer or wireless device. 3. Press the WPS/Reset button on the rear panel of the router. 4. Within two minutes, on your computer or WiFi device, press its WPS button or follow its instructions for WPS connections. Your computer or wireless device connects to the WiFi network. To find and select the WiFi network:
1. Make sure that the router has power (its Power LED is lit). 2. On your computer or wireless device, find and select the WiFi network. The WiFi network name is on the product label. 3. Join the WiFi network and enter the WiFi password. The password is on the product label. Your wireless device connects to the WiFi network. Connect to the Network and Access the Router 12 N300 Wireless Router Types of Logins Separate types of logins have different purposes. It is important that you understand the difference so that you know which login to use when. Types of logins:
Internet service login. The login that logs you in to your Internet service. Your service provider gave you this login information in a letter or some other way. If you cannot find this login information, contact your service provider. WiFi network login. Your router is preset with a unique wireless network name (SSID) and password for wireless access. This information is on the product label. Router login.This logs you in to the router interface as admin from a web browser. Use a Web Browser to Access the Router When you connect to the network (either with WiFi or with an Ethernet cable), you can use a web browser to access the router to view or change its settings. The first time you access the router, NETGEAR genie automatically checks to see if your router can connect to your Internet service. NETGEAR genie Automatic Internet Setup You can set up your router with the NETGEAR genie automatically, or you can use the genie menus and screens to set up your router manually. Before you start the setup process, get your ISP information and make sure that the computers and devices in the network have the settings described here. When your Internet service starts, your Internet service provider (ISP) typically gives you all the information needed to connect to the Internet. For DSL service, you might need the following information to set up your router:
If you cannot locate this information, ask your ISP to provide it. When your Internet connection is working, you no longer need to launch the ISP login program on your computer to access the Internet. When you start an Internet application, your router automatically logs you in. NETGEAR genie runs on any device with a web browser. Installation and basic setup takes about 15 The ISP configuration information for your DSL account ISP login name and password Fixed or static IP address settings (special deployment by ISP; this setting is rare) minutes to complete. Connect to the Network and Access the Router 13 N300 Wireless Router To use NETGEAR genie to set up your router:
1. Make sure that your computer or wireless device is connected to the router with an Ethernet cable (wired) or wirelessly with the preset security settings listed on the product label. Note:
If you want to change the routers WiFi setting, use a wired connection to avoid being disconnected when the new WiFi settings take effect. 2. Launch a web browser. The screen that displays depends on whether you have accessed the router before:
The first time you set up the Internet connection for your router, the browser goes to http://www.routerlogin.net, and the NETGEAR genie screen displays. If you already used the NETGEAR genie, type http://www.routerlogin.net in the address field for your browser to display the NETGEAR genie screen. 3. Follow the onscreen instructions. 4. 5. NETGEAR genie guides you through connecting the router to the Internet. If the browser cannot display the web page, do the following:
Make sure that the computer is connected to one of the four LAN Ethernet ports or wirelessly to the router. Make sure that the router has full power, and that its Power LED is lit white. Close and reopen the browser or clear the browser cache. Browse to http://www.routerlogin.net. If the computer is set to a static or fixed IP address (this setting is uncommon), change it to obtain an IP address automatically from the router. If the router does not connect to the Internet, do the following:
a. Review your settings. Make sure that you selected the correct options and typed everything correctly. b. Contact your ISP to verify that you have the correct configuration information. c. Read Chapter 6, Troubleshooting. If problems persist, register your NETGEAR product and contact NETGEAR technical support. Log In to the Router When you first set up your router, NETGEAR genie automatically starts when you launch a web browser on a computer that is connected to the router. If you want to view or change settings for the router, you can use genie again. To log in to the router:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. Connect to the Network and Access the Router 14 N300 Wireless Router A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Connect to the Network and Access the Router 15 3. Specify Your Internet Settings 3 Usually, the quickest way to set up the router to use your Internet connection is to allow the genie to detect the Internet connection when you first access the router with a web browser. You can also customize or specify your Internet settings. This chapter contains the following sections:
Use the Internet Setup Wizard Manually Set Up the Internet Connection Change the MTU Size 16 N300 Wireless Router Use the Internet Setup Wizard You can use the Setup Wizard to detect your Internet settings and automatically set up your router. The Setup Wizard is not the same as the genie screens that display the first time you connect to your router to set it up. To use the Setup Wizard:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup Wizard. 5. Select the Yes radio button. If you select No, you are taken to the Internet Setup screen (see Manually Set Up the Internet Connection ). 6. Click the Next button. The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration. Specify Your Internet Settings 17 N300 Wireless Router Manually Set Up the Internet Connection You can view or change the routers Internet connection settings. Specify an Internet Connection Without a Login To specify the Internet connection settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select Internet. You might need to scroll to view all the settings. 5. For the Does your Internet connection require a login setting, leave the No radio button selected. If your Internet connection requires an account name or host name, type it in the Account Name (If Required) field. If your Internet connection requires a domain name, type it in the Domain Name (If Required) field. 6. 7. Specify Your Internet Settings 18 N300 Wireless Router For the other sections in this screen, the default settings usually work, but you can change them. 8. For the Internet IP Address setting, select one of the following radio buttons:
Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses. Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned. The gateway is the ISP router to which your router connects. 9. For the Domain Name Server (DNS) Address setting, select one of the following radio buttons:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISPs primary DNS server. If a secondary DNS server address is available, enter it also. 10. For the Router MAC Address setting, select one of the following radio buttons:
Use Default Address. Use the default MAC address. Use Computer MAC Address. The router captures and uses the MAC address of the computer that you are now using. You must use the one computer that the ISP allows. Use This MAC Address. Enter the MAC address that you want to use. 11. Click the Apply button. Your settings are saved. 12. Click the Test button to test your Internet connection. If the NETGEAR website does not display within one minute, see Chapter 6, Troubleshooting. Specify an Internet Connection That Uses a Login To view or change the basic Internet setup:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Specify Your Internet Settings 19 N300 Wireless Router 4. Select Internet. You might need to scroll to view all the settings. 5. 6. 7. In the Does your Internet connection require a login section of the screen, select the Yes radio button. The screen adjusts. In the Internet Service Provider list, select the encapsulation method PPPoE, PPPoA, or L2TP. In the Login field, enter the login name your ISP gave you. This login name is often an email address. In the Password field, type the password that you use to log in to your Internet service. If your ISP requires a service name, type it in the Service Name (if Required) field. 8. 9. 10. In the Connection Mode drop-down list, select Always On, Dial on Demand, or Manually Connect. 11. To change the number of minutes until the Internet login times, out, in the Idle Timeout (In minutes) field, type the number of minutes. This is how long the router keeps the Internet connection active when no one on the network is using the Internet connection. A value of 0 (zero) means never log out. 12. In the Internet IP Address section, select one of the following radio buttons:
Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses. Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned. The gateway is the ISP router to which your router connects. Specify Your Internet Settings 20 N300 Wireless Router 13. In the Domain Name Server (DNS) Address section, select one of the following radio buttons:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISPs primary DNS server. If a secondary DNS server address is available, enter it also. 14. In the Router MAC Address section of the screen, select one of the following radio buttons:
Use Default Address. Use the default MAC address. Use Computer MAC Address. The router captures and uses the MAC address of the computer that you are now using. You must use the one computer that the ISP allows. Use This MAC Address. Enter the MAC address that you want to use. 15. Click the Apply button. Your settings are saved. 16. Click the Test button to test your Internet connection. If the NETGEAR website does not display within one minute, see Chapter 6, Troubleshooting. Change the MTU Size The maximum transmission unit (MTU) is the largest data packet a network device transmits. When one network device communicates across the Internet with another, the data packets travel through many devices along the way. If a device in the data path has a lower MTU setting than the other devices, the data packets must be split or fragmented to accommodate the device with the smallest MTU. The best MTU setting for NETGEAR equipment is often the default value. In some situations, changing the value fixes one problem but causes another. Leave the MTU unchanged unless one of these situations occurs:
You experience problems connecting to your ISP or other Internet service, and the technical support of either the ISP or NETGEAR recommends changing the MTU setting. These web-based applications might require an MTU change:
- A secure website that does not open, or displays only part of a web page
- Yahoo email
- MSN portal
- America Onlines DSL service You use VPN and have severe performance problems. You used a program to optimize MTU for performance reasons, and now you have connectivity or performance problems. Specify Your Internet Settings 21 N300 Wireless Router Note: An incorrect MTU setting can cause Internet communication problems. For example, you might not be able to access certain websites, frames within websites, secure login pages, or FTP or POP servers. To change the MTU size:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > WAN Setup. In the MTU Size field, enter a value from 64 to 1500. 5. 6. Click the Apply button. Your change is saved. If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are willing to experiment, you can gradually reduce the MTU from the maximum value of 1500 Specify Your Internet Settings 22 N300 Wireless Router until the problem goes away. The following table describes common MTU sizes and applications. Table 3. Common MTU sizes MTU 1500 1492 1472 1468 1460 1436 1400 576 Application The largest Ethernet packet size. This setting is typical for connections that do not use PPPoE or VPN, and is the default value for NETGEAR routers, adapters, and switches. Used in PPPoE environments. Maximum size to use for pinging. (Larger packets are fragmented.) Used in some DHCP environments. Usable by AOL if you do not have large email attachments, for example. Used in PPTP environments or with VPN. Maximum size for AOL DSL. Typical value to connect to dial-up ISPs. Specify Your Internet Settings 23 4. Networking 4 This chapter includes the following sections:
View or Change WAN Settings Set Up a Default DMZ Server Change the Routers Device Name Change the LAN TCP/IP Settings Specify the IP Addresses that the Router Assigns Disable the DHCP Server Feature in the Router Reserve LAN IP Addresses Use the WPS Wizard for WiFi Connections Specify Basic WiFi Settings Change the WiFi Security Option Set Up a Guest Network Control the Wireless Radio Set Up a Wireless Schedule Set up a Wireless Access List Specify WPS Settings Wireless Distribution System Static Routes View Devices Currently on the Network Improve Network Connections with Universal Plug and Play 24 N300 Wireless Router View or Change WAN Settings You can view or configure wide area network (WAN) settings for the Internet port. You can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router to respond to a ping to its WAN (Internet) port. To view or change the WAN settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > WAN Setup. The following settings display:
Disable Port Scan and DoS Protection. DoS protection protects your LAN against denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, and many others. Select this check box only in special circumstances. Default DMZ Server. This feature is sometimes helpful when you are playing online games or videoconferencing, but it makes the firewall security less effective. See Set Up a Default DMZ Server on page 26. Respond to Ping on Internet Port. This feature allows your router to be discovered. Use this feature only as a diagnostic tool or if you have a specific reason. MTU Size (in bytes). The normal MTU (maximum transmit unit) value for most Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. Change the Networking 25 N300 Wireless Router MTU only if you are sure that it is necessary for your ISP connection. See Change the MTU Size on page 21. NAT Filtering. Network Address Translation (NAT) determines how the router processes inbound traffic:
- Secured NAT provides a secured firewall to protect the computers on the LAN from attacks from the Internet, but might prevent some Internet games, point-to-point applications, or multimedia applications from functioning. By default, the Secured radio button is selected.
- Open NAT provides a much less secured firewall, but allows almost all Internet applications to function. Disable SIP ALG. Some Voice over IP (VoIP) applications do not function well with the Session Initiation Protocol (SIP) Application Layer Gateway (ALG). Selecting the check box to turn off the SIP ALG might enable connected VoIP devices to create and accept a VoIP call through the router. By default, this check box is cleared. Disable IGMP Proxying. IGMP proxying allows computers on the LAN to receive the multicast traffic they are subscribed to from the Internet. By default, this check box is selected, and the IGMP proxy is disabled, preventing multicast traffic from the Internet to the LAN. Clear the Disable IGMP Proxying check box to allow multicast traffic from the Internet to the LAN. VPN Passthrough. The router supports VPN passthrough for IPSec, PPTP, and L2TP.
-
IPSec Passthrough. To enable or disable IPSec passthrough, select the Enable or Disabled radio button.
- PPTP Passthrough. To enable or disable PPTP passthrough, select the Enable or Disabled radio button. L2TP Passthrough. To enable or disable L2TP passthrough, select the Enable or Disabled radio button. 5. Change the settings as needed. 6. Click the Apply button. Your changes are saved. Set Up a Default DMZ Server The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation
(NAT). The router is programmed to recognize some of these applications and to work correctly with them, but other applications might not function well. In some cases, one local computer can run the application correctly if the IP address for that computer is entered as the default DMZ server. Networking 26 N300 Wireless Router WARNING:
DMZ servers pose a security risk. A computer designated as the default DMZ server loses much of the protection of the firewall and is exposed to exploits from the Internet. If compromised, the DMZ server computer can be used to attack other computers on your network. The router detects and discards incoming traffic from the Internet that is not a response to one of your local computers or a service that you have configured in the Port Forwarding/Port Triggering screen. Instead of discarding this traffic, you can have the router forward the traffic to one computer on your network. This computer is called the default DMZ server. To set up a default DMZ server:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > WAN Setup. 5. Select the Default DMZ Server check box. 6. Type the IP address. 7. Click the Apply button. Your change is saved. Change the Routers Device Name The routers device name displays in file manager when you browse your network. To change the routers device name:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. Networking 27 N300 Wireless Router The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > LAN Setup. 5. In the Device Name field, type a new name. 6. Click the Apply button. Your change is saved. Change the LAN TCP/IP Settings The router is preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The routers default LAN IP configuration is as follows:
LAN IP address. 192.168.1.1 Subnet mask. 255.255.255.0 These addresses are part of the designated private address range for use in private networks and are suitable for most applications. If your network requires a different IP addressing scheme, you can change these settings You might want to change these settings if you need a specific IP subnet that one or more devices on the network uses, or if you have competing subnets with the same IP scheme. To change the LAN TCP/IP settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Networking 28 N300 Wireless Router 4. Select ADVANCED > Setup > LAN Setup. 5. 6. In the IP Address field, type the IP address. In the IP Subnet Mask, type the subnet mask of the router. The IP address and subnet mask identifies which addresses are local to a specific device and which must be reached through a gateway or router. 7. Change the RIP settings. Router Information Protocol (RIP) allows a router to exchange routing information with other routers. a. In the RIP Direction list, select one of the following:
- Both. The router broadcasts its routing table periodically and incorporates information that it receives.
- Out Only. The router broadcasts its routing table periodically.
-
In Only. The router incorporates the RIP information that it receives. b. In the RIP Version list, select one of the following:
- Disabled. This is the default setting.
- RIP-1. This format is universally supported. It is adequate for most networks, unless you have an unusual network setup.
- RIP-2. This format carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting. 8. Click the Apply button. Your changes are saved. If you changed the LAN IP address of the router, you are disconnected when this change takes effect. 9. To reconnect, close your browser, relaunch it, and log in to the router Networking 29 N300 Wireless Router Specify the IP Addresses that the Router Assigns By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned default gateway address is the LAN address of the router. These addresses must be part of the same IP address subnet as the routers LAN IP address. Using the default addressing scheme, define a range between 192.168.1.2 and 192.168.1.254, although you can save part of the range for devices with fixed addresses. The router delivers the following parameters to any LAN device that requests DHCP:
An IP address from the range that you have defined Subnet mask Gateway IP address (the routers LAN IP address) DNS server IP address (the routers LAN IP address) To specify the pool of IP addresses that the router assigns:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > LAN Setup. 5. Make sure that the Use Router as DHCP Server check box is selected. 6. Specify the range of IP addresses that the router assigns:
Networking 30 N300 Wireless Router a. In the Starting IP Address field, type the lowest number in the range. This IP address must be in the same subnet as the router. b. In the Ending IP Address field, type the number at the end of the range of IP addresses. This IP address must be in the same subnet as the router. 7. Click the Apply button. Your settings are saved. Disable the DHCP Server Feature in the Router By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned default gateway address is the LAN address of the router. You can use another device on your network as the DHCP server, or specify the network settings of all your computers. To disable the DHCP server feature in the router:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > LAN Setup. 5. Clear the Use Router as DHCP Server check box. 6. Click the Apply button. 7. (Optional) If this service is disabled and no other DHCP server is on your network, set your computer IP addresses manually so that they can access the router. Reserve LAN IP Addresses When you specify a reserved IP address for a computer on the LAN, that computer always receives the same IP address each time it accesses the routers DHCP server. Assign reserved IP addresses to computers or servers that require permanent IP settings. Networking 31 N300 Wireless Router To reserve an IP address:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > LAN Setup. 5. 6. In the Address Reservation section of the screen, click the Add button. In the IP Address field, type the IP address to assign to the computer or server. Choose an IP address from the routers LAN subnet, such as 192.168.1.x. 7. Type the MAC address of the computer or server. Tip: If the computer is already on your network, you can copy its MAC address from the Attached Devices screen and paste it here. 8. Click the Apply button. The reserved address is entered into the table. The reserved address is not assigned until the next time the computer contacts the routers DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release and renew. To edit a reserved address entry:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > LAN Setup. 5. Select the radio button next to the reserved address. 6. Click the Edit button. 7. Change the settings. Networking 32 N300 Wireless Router 8. Click the Apply button. Your changes are saved. To delete a reserved address entry:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > LAN Setup. 5. Select the radio button next to the reserved address. 6. Click the Delete button. The address is removed. Use the WPS Wizard for WiFi Connections The WPS Wizard helps you add a wireless computer or device to your WiFi network without typing the WiFi password. To use the WPS Wizard:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > WPS Wizard. 5. Click the Next button. 6. Select the radio button for the setup method that you want to use:. Push button. Click the WPS button on this screen. PIN Number. The screen adjusts. Enter the client security PIN, and click the Next button. Networking 33 N300 Wireless Router 7. Within two minutes, go to the client device and use its WPS software to connect to the WiFi network. The WPS process automatically sets up your wireless computer with the network password when it connects. The router WPS screen displays a confirmation message. Specify Basic WiFi Settings The router comes with preset security. This means that the WiFi network name (SSID), network key (password), and security option (encryption protocol) are preset in the factory. You can find the preset SSID and password on the product label. Note: The preset SSID and password are uniquely generated for every device to protect and maximize your wireless security. NETGEAR recommends that you do not change your preset security settings. If you change your preset security settings, make a note of the new settings and store it in a safe place where you can easily find it. If you use a wireless computer to change the wireless network name (SSID) or other wireless security settings, you are disconnected when you click the Apply button. To avoid this problem, use a computer with a wired connection to access the router. To specify basic wireless settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Networking 34 N300 Wireless Router 4. Select Wireless. In the Region list, select your region. In some locations, you cannot change this setting. 5. 6. To change the network name (SSID), type a new name in the Name (SSID) field. The name can be up to 32 characters long and it is case-sensitive. The default SSID is randomly generated and is on the product label. If you change the name, make sure to write down the new name and keep it in a safe place. 7. To change the wireless channel, select a number in the Channel list. In some regions, not all channels are available. Do not change the channel unless you experience interference (shown by lost connections or slow data transfers). If this happens, experiment with different channels to see which is the best. When you use multiple access points, it is better if adjacent access points use different channels to reduce interference. The recommended channel spacing between adjacent access points is four channels (for example, use Channels 1 and 5, or 6 and 10). 8. To change the mode, select it from the Mode list. 9. To control the SSID broadcast, select or clear the Enable SSID Broadcast check box. When this check box is selected, the router broadcasts its network name (SSID) so that it displays when you scan for local WiFi networks on your computer or wireless device. 10. To prevent computers and wireless devices on the network from accessing each other, select the Enable Wireless Isolation check box. 11. Click the Apply button. Your settings are saved. If you connected wirelessly to the network and you changed the SSID, you are disconnected from the network. 12. Make sure that you can connect wirelessly to the network with its new settings. Networking 35 N300 Wireless Router If you cannot connect wirelessly, check the following:
Is your computer or wireless device connected to another wireless network in your area? Some wireless devices automatically connect to the first open network without wireless security that they discover. Is your computer or wireless device trying to connect to your network with its old settings (before you changed the settings)? If so, update the wireless network selection in your computer or wireless device to match the current settings for your network. Change the WiFi Security Option Your router comes with preset WPA2 or WPA security. The password that you enter to connect to your network is unique to your router and is on the product label. NETGEAR recommends that you use the preset security, but you can change them. NETGEAR recommends that you do not disable security. To change the WPA settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select Wireless. 5. Under Security Options, select a radio button for one of the following WPA options:
WPA-PSK [TKIP]
WPA2-PSK [AES]
WPA-PSK [TKIP} + WPA2-PSK [AES]
WPA/WPA2 Enterprise The WPA2 options use the newest standard for the strongest security, but some older computers and wireless devices cannot use WPA2. By default, the WPA-PSK [TKIP] +
WPA2-PSK [AES] radio button is selected so that new or old computers and wireless devices can connect to the WiFi network by using either WPA2 or WPA security. The Passphrase field displays. In the Passphrase field, enter the network key (password) that you want to use. It is a text string from 8 to 63 characters. 6. Networking 36 N300 Wireless Router 7. Write down the new password and keep it in a secure place for future reference. 8. Click the Apply button. Your changes are saved. Set Up a Guest Network A guest network allows visitors at your home to use the Internet without using your wireless security key. You can add a guest network to each wireless network: 2.4 GHz b/g/n and 5.0 GHz a/n. To set up a guest network:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select Guest Network. 5. Select any of the following wireless settings:
Enable Guest Network. When this check box is selected, the guest network is enabled, and guests can connect to your network using the SSID of this profile. Enable SSID Broadcast. If this check box is selected, the wireless access point broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt the correct SSID for connections to this access point. Networking 37 N300 Wireless Router Allow guest to see each other and access my local network. If this check box is selected, anyone who connects to this SSID has access to your local network, not just Internet access. 6. Give the guest network a name. The guest network name is case-sensitive and can be up to 32 characters. You then manually configure the wireless devices in your network to use the guest network name in addition to the main SSID. 7. Select a radio button for a security option. The WPA2 options use the newest standard for the strongest security, but some older computers and wireless devices cannot use it. NETGEAR recommends that you select the WPA-PSK [TKIP] + WPA2-PSK [AES] radio button. This setting protects your WiFi network and lets computers and wireless devices can connect to the WiFi network by using either WPA2 or WPA security. 8. Click the Apply button. Your settings are saved. Control the Wireless Radio The router has an internal wireless radio that broadcasts signals in the 2.4 GHz range. By default, it is enabled so that you can connect wirelessly to the router. When the wireless radio is disabled, you can still use an Ethernet cable for a LAN connection to the router. Enable or Disable the Wireless Radio To enable or disable the wireless radio:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Networking 38 N300 Wireless Router 4. Select ADVANCED > Advanced Setup > Wireless Settings. 5. Select or clear the Enable Wireless Radio check box. Clearing this check box turns off the WiFi feature of the router. 6. Click the Apply button. Your changes are saved. Set Up a Wireless Schedule You can use this feature to turn off the wireless signal from your router at times when you do not need a wireless connection. For example, you might turn it off for the weekend if you leave town. To set up the wireless schedule:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Wireless Settings. The Advanced Wireless Settings screen displays. Networking 39 N300 Wireless Router 5. Click the Add a new period button. 6. Use the lists, radio buttons, and check boxes to set up a period during which you want to turn off the wireless signal. 7. Click the Apply button. The Advanced Wireless Settings screen displays. 8. Select the Turn off wireless signal by schedule check box to activate the schedule. 9. Click the Apply button. Your changes are saved. Set up a Wireless Access List You can set up a list of computers and wireless devices that are allowed to use WiFi to connect to the router. You must enter the MAC address of each computer or device. When you enable access control, computers and devices that are not in the list cannot connect with WiFi. To set up a wireless access list and turn on access control:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Networking 40 N300 Wireless Router 4. Select ADVANCED > Advanced Setup > Wireless Settings. 5. Click the Set Up Access List button. 6. Click the Add button. The screen adjusts. 7. Complete the Device Name and MAC Address fields. 8. Click the Add button. The Wireless Card Access List screen displays with the device that you added in the access list. 9. When you have finished adding devices to the access list, select the Turn Access Control On check box. 10. Click the Apply button. Your changes are saved. Networking 41 N300 Wireless Router Specify WPS Settings Wi-Fi Protected Setup (WPS) lets you join the WiFi network without typing the WiFi password. To specify WPS Settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Wireless Settings. The Routers PIN field displays the PIN that you use on a registrar (for example, from the Network Explorer on a Vista Windows computer) to configure the routers wireless settings through WPS. 5. (Optional) Select or clear the Disable Routers PIN check box. The PIN function might temporarily be disabled when the router detects suspicious attempts to break into the routers wireless settings by using the routers PIN through WPS. You can manually enable the PIN function by clearing the Disable Routers PIN check box. 6. (Optional) Select or clear the Keep Existing Wireless Settings check box. By default, the Keep Existing Wireless Settings check box is selected. NETGEAR recommends that you leave this check box selected. If you clear this check box, the next time a new wireless client uses WPS to connect to the router, the router wireless settings change to an automatically generated random SSID and security key. 7. Click the Apply button. Your changes are saved. Wireless Distribution System You can set up the router to be used as a wireless base station or wireless repeater in a wireless distribution system (WDS). A WDS lets you expand a wireless network through multiple access points instead of using a wired backbone to link them. A wireless base station connects to the Internet, can have wired and wireless clients, and sends its wireless signal to an access point that functions as a wireless repeater. A wireless repeater can also have Networking 42 N300 Wireless Router wired and wireless clients, but connects to the Internet through the wireless base station. The router can function either as a base station or as a repeater:
Wireless base station. The router acts as the parent access point, bridging traffic to and from the child repeater access point, as well as handling wireless and wired local computers. To configure this mode, you must know the MAC address of the child repeater access point. Wireless repeater. The router sends all traffic from its local wireless or wired computers to a remote access point. To configure this mode, you must know the MAC address of the remote parent access point. For you to set up a wireless network in a WDS, the following conditions must be met for both access points:
Both access points must use the same SSID, wireless channel, and encryption mode. Both access points must be on the same LAN IP subnet. That is, all the access point LAN IP addresses are in the same network. All LAN devices (wired and wireless computers) must be configured to operate in the same LAN network address range as the access points. The channel selection on the access points cannot be Auto (see Basic Wireless Settings on page The security option must be WEP (or no security). The WEP option displays only if you select Up to 54 Mbps from the Mode list on the Wireless Settings screen (see Basic Wireless Settings on page 28). 28). Set Up the Base Station The wireless repeating function works only in hub and spoke mode. The units cannot be daisy-chained. You must know the wireless MAC addresses of all units. First, set up the base station and then set up the repeater. To set up the base station:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Wireless Repeating Function. The Wireless Repeating Function screen displays. The wireless MAC address of the router displays onscreen. Networking 43 N300 Wireless Router 5. Select the Enable Wireless Repeating Function check box. 6. Select the Wireless Base Station radio button. 7. To prevent wireless clients from associating with the base station and allow LAN client associations only, select the Disable Wireless Client Association check box. You can leave the check box cleared if you prefer wireless clients to be able to associate with the base stations. In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access points that should function as repeaters. If your router is the base station, it can function as the parent for up to four other access points. 8. 9. Click the Apply button. Your changes are saved. Set Up a Repeater To set up the repeater to avoid conflicts with the wireless connection to the base station, use a wired Ethernet connection. Note: If you set up your router as a base station with a non-NETGEAR access point as the repeater, you might need to change more configuration settings. In particular, you should disable the DHCP server function on the access point that functions as the repeater. To configure the router as a repeater:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. Networking 44 N300 Wireless Router A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Wireless Repeating Function. The Wireless Repeating Function screen displays. The wireless MAC address of the router displays onscreen. 5. Select the Enable Wireless Repeating Function check box. 6. Select the Wireless Repeater radio button. 7. Complete the Repeater IP Address field. This IP address must be in the same subnet as the base station, but different from the LAN IP address of the base station. 8. To prevent wireless clients from associating with the repeater and allow LAN client associations only, select the Disable Wireless Client Association check box. You can leave the check box cleared if you prefer wireless clients to be able to associate with the repeater. In the Base Station MAC Address field, enter the MAC addresses for the access point that will function as the base station. 9. 10. Click the Apply button. Your changes are saved. 11. Verify connectivity across the LANs. A computer on any wireless or wired LAN segment of the base station or a repeater can connect to the Internet. Any computer that is connected to the base station can share files and printers with any other wireless or wired computer or server that is connected to a repeater. Networking 45 N300 Wireless Router Static Routes Static routes provide more routing information to your router. Under usual circumstances, the router has adequate routing information after it has been configured for Internet access, and you do not need to configure more static routes. You must configure static routes only for unusual cases such as multiple routers or multiple IP subnets on your network. As an example of when a static route is needed, consider the following case:
Your primary Internet access is through a cable modem to an ISP. You have an ISDN router on your home network for connecting to the company where you are employed. This routers address on your LAN is 192.168.1.100. Your companys network address is 134.177.0.0. When you first configured your router, two implicit static routes were created. A default route was created with your ISP as the gateway, and a second static route was created to your local network for all 192.168.1.x addresses. With this configuration, if you attempt to access a device on the 134.177.0.0 network, your router forwards your request to the ISP. The ISP forwards your request to the company where you are employed, and the companys firewall denies the request. In this case you must define a static route, telling your router that 134.177.0.0 should be accessed through the ISDN router at 192.168.1.100. This example assumes the following settings:
The Destination IP Address and IP Subnet Mask fields specify that this static route applies to all 134.177.x.x addresses. The Gateway IP Address field specifies that all traffic for these addresses should be forwarded to the ISDN router at 192.168.1.100. A metric value of 1 works because the ISDN router is on the LAN. Private is selected only as a precautionary security measure in case RIP is activated. To set up a static route:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Static Routes. 5. Click the Add button. Networking 46 N300 Wireless Router The screen adjusts:
6. 7. In the Route Name field, type a name for this static route (for identification purposes only). If you want to limit access to the LAN only, select the Private check box. If you select Private, the static route is not reported in RIP. 8. To make this route effective, select the Active check box. By default, the Active check box is selected. 9. Type the IP address of the final destination. 10. Type the IP subnet mask for this destination. If the destination is a single host, type 255.255.255.255. 11. Type the gateway IP address, which must be a router on the same LAN segment as the Wireless Router. 12. Type a number from 1 through 15 as the metric value. This value represents the number of routers between your network and the destination. Usually, a setting of 2 or 3 works, but if this link is a direct connection, set it to 1. 13. Click the Apply button. The route is added to the table on the Static Routes screen. To edit a static route:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes screen displays. In the table, select the radio button next to the route that you want to edit. 5. Networking 47 N300 Wireless Router 6. Click the Edit button. The Static Routes screen adjusts. 7. Edit the route information. 8. Click the Apply button. Your changes are saved. To delete a static route:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes screen displays. In the table, select the radio button next to the route that you want to delete. 5. 6. Click the Delete button. The route is removed from the table. View Devices Currently on the Network You can view all computers or devices that are currently connected to your network. To view devices on the network:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Networking 48 N300 Wireless Router 4. Select Attached Devices. The Wired Devices section lists devices that are connected to the router with Ethernet cables. The Wireless Devices section lists devices that are connected to the wireless network. The following information is displayed:
Status. The status of the device, Allowed or Blocked. Device Name. If the device name is known, it is shown here. IP Address. The IP address that the router assigned to this device when it joined the network. This number can change if a device is disconnected and rejoins the network. MAC Address. The unique MAC address for each device does not change. The MAC address is typically shown on the product label. 5. To update this screen, click the Refresh button. Improve Network Connections with Universal Plug and Play Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network. If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time communications such as instant messaging or remote assistance (a feature in Windows XP), enable UPnP. To enable Universal Plug and Play:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://routerlogin.net or http://192.168.0.1. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Networking 49 N300 Wireless Router 4. Select ADVANCED > Advanced Setup > UPnP. 5. Select the Turn UPnP On check box. By default, this check box is selected. If the Turn UPnP On check box is cleared, the router does not allow any device to automatically control router resources, such as port forwarding. 6. Type the advertisement period in minutes. The advertisement period specifies how often the router broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that control points have current device status at the expense of more network traffic. Longer durations can compromise the freshness of the device status, but can significantly reduce network traffic. 7. Type the advertisement time to live in hops. The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. Hops are the steps a packet takes between routers. The number of hops can range from 1 to 255. The default value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you notice that some devices are not being updated or reached correctly, it might be necessary to increase this value. 8. Click the Apply button. The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the router and which ports (internal and external) that device has opened. The UPnP Portmap Table also displays what type of port is open and whether that port is still active for each IP address. To refresh the information in the UPnP Portmap table, click the Refresh button. Networking 50 5. Manage Your Network 5 This chapter describes the router settings for administering and maintaining your router and home network. This chapter includes the following sections:
Update the Router Firmware Change the admin Password Recover the admin Password View Router Status View the Internet Connection Settings View Wireless Settings View Guest Network Settings Reboot the Router Manage the Configuration File 51 N300 Wireless Router Update the Router Firmware The router firmware (routing software) is stored in flash memory. You might see a message at the top of the genie screens when new firmware is available. You can respond to that message to update the firmware, or you can check to see if new firmware is available, and to update your product. To check for new firmware and update your router:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Administration > Firmware Update. 5. Click the Check button. The router finds new firmware information if any is available and displays a message asking if you want to download and install it. 6. Click the Yes button. The router locates and downloads the firmware. 7. To upload the firmware that you have downloaded from the NETGEAR support website, do the following:
a. Click Browse, navigate to the firmware file (the file ends in .img), and select the firmware file. b. Click the Upload button. WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the upgrade. For example, do not close the browser, click a link, or load a new page. Do not turn off the router. A progress bar shows the progress of the firmware upload process:
When the upload is complete, your router restarts. The upload process can take up to three minutes, and the upgrade process typically takes about one minute. To determine whether you need to reconfigure the router after upgrading, read the new firmware release notes. Manage Your Network 52 N300 Wireless Router Change the admin Password This feature let you change the default password that is used to log in to the router with the user name admin. This password is not the one that you use for WiFi access. The product label shows your unique wireless network name (SSID) and password for wireless access. To set the password for the user name admin:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Administration > Set Password. 5. Type the old password, and type the new password twice. 6. To be able to recover the password, select the Enable Password Recovery check box. NETGEAR recommends that you enable password recovery. 7. Click the Apply button. Your changes are saved. Recover the admin Password NETGEAR recommends that you enable password recovery if you change the password for the router user name admin. Then you can recover the password if it is forgotten. This recovery process is supported in Internet Explorer, Firefox, and Chrome browsers, but not in the Safari browser. To set up password recovery:
1. Launch a web browser from a computer or wireless device that is connected to the network. Manage Your Network 53 N300 Wireless Router 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Administration > Set Password. 5. Select the Enable Password Recovery check box. 6. Select two security questions and provide answers to them. 7. Click the Apply button. Your changes are saved. To recover your password:
1. In the address field of your browser, type www.routerlogin.net. A login screen displays. 2. Click Cancel. If password recovery is enabled, you are prompted to answer two security questions. 3. Enter the saved answers to the security questions. 4. Enter the serial number of your router. The serial number is on the product label. View Router Status To view router status and usage information:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. Manage Your Network 54 N300 Wireless Router 4. Click the ADVANCED tab. The Router Information pane displays the following information:
Hardware Version. The router model. Firmware Version. The version of the router firmware. It changes if you upgrade the router firmware. GUI Language Version. The localized language of the router user interface. LAN Port:
- MAC Address. The Media Access Control address for the Ethernet (LAN) port. This address is the unique physical address that the Ethernet (LAN) port of the router uses. IP Address. The IP address that the Ethernet (LAN) port of the router uses. The default is 192.168.1.1.
-
- DHCP Server. Identifies whether the routers built-in DHCP server is active for the LAN-attached devices. View the Internet Connection Settings To view the Internet connection settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. Manage Your Network 55 N300 Wireless Router The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Click the ADVANCED tab. The Internet Port pane displays the following information:
MAC Address. The Media Access Control (MAC) address for the Internet port. This address is the unique physical address that the Internet (WAN) port of the router uses. IP Address. The IP address that the Internet (WAN) port of the router uses. If no address is shown or the address is 0.0.0.0, the router is not connected to the Internet. Connection. Shows whether the router is using a fixed or dynamic IP address on the Internet port. If the value is DHCP, the router obtains an IP address dynamically from the ISP or from a DHCP server on your LAN. IP Subnet Mask. The IP subnet mask that the Internet port of the router uses. Domain Name Server. The Domain Name Server address that the router uses. A Domain Name Server translates human-language URLs such as www.netgear.com into IP addresses. Display Internet Port Statistics To display Internet port statistics:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. 4. The BASIC Home screen displays 5. Click the ADVANCED tab. Manage Your Network 56 N300 Wireless Router 6. In the Internet Port pane, click the Show Statistics button. The following information displays:
System Up Time. The time elapsed since the router was last restarted. Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the screen displays:
- Status. The link status of the port.
-
TxPkts. The number of packets transmitted on this port since reset or manual clear.
- RxPkts. The number of packets received on this port since reset or manual clear.
- Collisions. The number of collisions on this port since reset or manual clear.
- Up Time. The time elapsed since this port acquired the link.
- Poll Interval. The interval at which the statistics are updated in this screen. 7. To change the polling frequency, enter a time in seconds in the Poll Interval field and click the Set Interval button. 8. To stop the polling, click the Stop button. View the Internet Connection Status To check the Internet connection status:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Click the ADVANCED tab. Manage Your Network 57 N300 Wireless Router 5. In the Internet Port pane, click the Connection Status button. The Connection Status pop-up screen displays. The following figure shows the connection status information for a DHCP connection. The content of the Connection Status pop-up screen depends on the type of connection. You can start new connections and end existing connections from this screen. The following list describes the different types of connections and the associated settings that display on the Connection Status pop-up screen:
DHCP Connection The following information displays for a DHCP connection:
Subnet Mask. The subnet mask that is assigned to the router. Default Gateway. The IP address for the default gateway that the router communicates IP Address. The IP address that is assigned to the router. with. DHCP Server. The IP address for the Dynamic Host Configuration Protocol server that configures the TCP/IP for all the computers that are connected to the router. DNS Server. The IP address of the Domain Name Service server that translates of network names to IP addresses. Lease Obtained. The date and time when the lease was obtained. Lease Expires. The date and time that the lease expires. To change the router DHCP connection settings:
1. To release the routers IP address and terminate the Internet connection, click the Release button. 2. To let the router acquire an IP address from the DHCP server and start the Internet connection, click the Renew button. 3. To close the Connection Status screen, click the Close Window button. Manage Your Network 58 N300 Wireless Router PPPoE Connection The Connect and Disconnect buttons in the Connection Status screen display only when the connection mode is Manually Connect. The following information displays for a PPPoE connection:
Connection Time. The time that elapsed since the connection was established. Connection Status. The status of the connection: Connected, Disconnected, Negotiation
(---, Success), or Authentication (---, Success). --- indicates failure. IP Address. The IP address that is assigned to the router. Subnet Mask. The subnet mask that is assigned to the router. To change the router PPPoE connection settings:
1. To establish the PPPoE connection manually, click the Connect button. 2. To terminate the PPPoE connection manually, click the Disconnect button. 3. To close the Connection Status screen, click the Close Window button. PPTP Connection The content of the Connection Status pop-up screen depends on the type of connection. The Connect and Disconnect buttons in the Connection Status screen display only when the connection mode is Manually Connect. The following information displays for a PPTP connection:
Connection Status. The status of the connection: Connected or Disconnected. Subnet Mask. The subnet mask that is assigned to the router. IP Address. The IP address that is assigned to the router. To change the router PPTP connection settings:
1. To establish the PPTP connection manually, click the Connect button. 2. To terminate the PPTP connection manually, click the Disconnect button. 3. To close the Connection Status screen, click the Close Window button. View Wireless Settings To view the wireless settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. Manage Your Network 59 N300 Wireless Router The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Click the ADVANCED tab. The Wireless Settings pane displays the following information:
Name (SSID). The wireless network name (SSID) that the router uses. Region. The geographic region where the router is used. It might be illegal to use the wireless features of the router in some parts of the world. Channel. The operating channel of the wireless port. The default channel is Auto. When Auto is selected, the router finds the best operating channel available. Mode. The wireless communication mode: Up to 54 Mbps, Up to 150 Mbps (the default), or Up to 300 Mbps. Wireless AP. Indicates whether the radio of the router is enabled. If the radio is not enabled, the WiFi LED on the front panel is off. Broadcast Name. Indicates whether the router is broadcasting its SSID. Wireless Isolation. Indicates whether wireless isolation is on or off. When it is off, wireless clients (computers or wireless devices) that join the network can use the Internet, but cannot access each other or access Ethernet devices on the network. Wi-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured for this network. View Guest Network Settings To view the guest network settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Click the ADVANCED tab. The Guest Network pane displays the following information:
Name (SSID). The wireless network name (SSID) that the router uses. The default name is NETGEAR-Guest. Wireless AP. Indicates whether the radio of the router is enabled for the guest network. Manage Your Network 60 N300 Wireless Router Broadcast Name. Indicates whether the router is broadcasting its SSID for the guest network. Wireless Isolation. Indicates whether wireless isolation is on or off for the guest network. When it is off, wireless clients (computers or wireless devices) that join the guest network can use the Internet, but cannot access each other or access Ethernet devices on the network. Allow guest to access My Local Network. Indicates whether wireless clients on the guest network can access your local network, instead of only the Internet and other wireless clients on the guest network. Reboot the Router To reboot the router:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. In the Router Information pane, click the Reboot button. 4. Click the ADVANCED tab. 5. 6. Click OK to confirm. The router reboots. Manage the Configuration File The configuration settings of the router are stored within the router in a configuration file. You can back up (save) this file to your computer, restore it, or reset it to the factory default settings. Back Up Settings To back up the routers configuration settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. Manage Your Network 61 N300 Wireless Router 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Administration > Backup Settings. 5. To save a copy of the current settings, click the Back Up button. 6. Choose a location to store the .cfg file on a computer on your network. 7. Click the OK button. A copy of the current settings is saved. Restore Configuration Settings To restore configuration settings that you backed up:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Administration > Backup Settings. The Backup Settings screen displays. 5. To find the .cfg file, click the Browse button. 6. Select the file and then click the Restore button. The file is uploaded to the router. The router reboots. Manage Your Network 62 N300 Wireless Router WARNING:
Do not interrupt the reboot process. Erase Configuration Settings Under some circumstances (for example, if you move the router to a different network), you might want to erase the configuration and restore the factory default settings. You can either use the Restore Factory Settings button on the back of the router (see Factory Settings on page 76), or you can use the Erase button on the Backup Settings screen. To erase the configuration and restore the factory default settings:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Administration > Backup Settings. The Backup Settings screen displays. 5. Click the Erase button. 6. To confirm the action click the Yes button. The router reboots. WARNING:
Do not interrupt the reboot process. Erasing sets the user name to admin, the password to password, and the LAN IP address to 192.168.1.1, and enables the routers DHCP server. Manage Your Network 63 6. Troubleshooting 6 This chapter provides information to help you diagnose and solve problems you might have with your router. If you do not find the solution here, visit the NETGEAR support site at http://support.netgear.com for product and contact information. This chapter contains the following sections:
Forgotten Passwords WiFi Connections Changes Not Saved Troubleshoot with the LEDs Cannot Log In to the Router Troubleshoot IP Addresses The Router Cannot Access the Internet Troubleshoot Your Network Using the Ping Utility 64 N300 Wireless Router Forgotten Passwords The router user name admin lets you use a web browser to log in to the router to view or change its settings. The routers WiFi network name lets you connect to its WiFi network. Both admin and the WiFi network have passwords by default. admin Password The default password for the router user name admin is password. If you changed it and enabled password recovery, you can recover the password. To recover your password when password recovery is enabled:
1. In the address field of your browser, type www.routerlogin.net. A login screen displays. 2. Click Cancel. If password recovery is enabled, you are prompted to answer two security questions. 3. Enter the saved answers to the security questions. 4. Enter the serial number of your router. The serial number is on the product label. If you changed the password and did not enable password recovery, you can use the Reset button to return the router to its factory settings. This erases all the routers current settings including its Internet connection settings. For more information, see Factory Settings on page 76. WiFi Passwords The router comes preset with a unique WiFi network name and WiFi password. This information is on the product label. You can also set up a guest network to allow visitors to access your Internet connection. If you changed the WiFi settings and do not remember what they are, you can use a wired Ethernet connection to log in to the router to view the WiFi settings. To use a wired connection to view WiFi settings:
1. Use an Ethernet cable to connect your computer to an Ethernet LAN port on the router. An Ethernet LED lights for the port where you connected the computer. 2. Launch a web browser from the connected computer. 3. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 4. Enter the router user name and password. Troubleshooting 65 N300 Wireless Router The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 5. To view the WiFi settings, select Wireless. The Wireless Network screen displays. 6. To view guest network settings, select Guest. The Guest Network Settings screen displays. WiFi Connections If you are having trouble connecting wirelessly to the router, try to isolate the problem. The WiFi signal strength is weak. Check these conditions:
-
Is your router too far from your computer, or too close? Move your computer near the router, but at least six feet (two meters) away, and see if the signal strength improves. Is your WiFi signal blocked by objects between the router and your computer?
-
Your computer or wireless devices does not find your WiFi network. Check the following:
-
Is the WiFi LED If this LED is off, someone might have disabled the wireless radio or set up a wireless schedule. For more information about these settings, see Control the Wireless Radio on page on the router lit?
38.
- Did you disable the routers SSID broadcast?
If you cleared the Enable SSID Broadcast check box in the Wireless Network screen, your wireless network is hidden and does not display in your wireless clients scanning list. To connect to a hidden network, you must type the network name and the WiFi password. For more information about the SSID broadcast, see Specify Basic WiFi Settings on page 34.
- Does your computer or wireless device support the security that you are using for your WiFi network (WEP, WPA, or WPA2)?
For information about wireless security settings, see Specify Basic WiFi Settings on page 34.
- Did you set up a wireless access list in the router?
If you set up an access list, you must add the MAC address for each computer and wireless device to the list. For more information about access list settings, see Set up a Wireless Access List on page 40. Troubleshooting 66 N300 Wireless Router Changes Not Saved If the router does not save the changes you make through the NETGEAR genie screens, check the following:
When you log in to the router and change the settings on a screen, always click the Apply button before you move to another screen or tab, or your changes are lost. Click the Refresh or Reload button in the web browser. The changes might have occurred, but the old settings might be in the web browsers cache. Troubleshoot with the LEDs The LEDs on the front panel of the router indicate its status. Apply Power to the Router and Check the LEDs To apply power to the router and check the LEDs:
1. Connect the power adapter cord that came with the router and plug it in to a power outlet. The Power LED lights and turns amber within a few seconds. This indicates that the self-test is running. 2. After approximately 30 seconds, verify that the LEDS are lit as follows:
is lit solid green. is lit solid green. The Power LED The WiFi LED The Internet LED The Ethernet LEDs (1 through 4) any computers cabled to the router by an Ethernet cable. is lit solid green. are lit solid green or solid amber for 3. If the LEDs do not light as expected, use the LED behavior to troubleshoot the problem. All LEDs Remain Lit When the router is turned on, the LEDs light for about 10 seconds and then turn off. If all the LEDs stay lit, a fault exists within the router. If all LEDs are still lit one minute after power-up, try the following:
Unplug the routers power adapter cord. Plug it in again and see if the router recovers. To return the router to its factory settings, press and hold the Reset button. For more information, see Factory Settings on page 76. If the error persists, you might have a hardware problem. Contact technical support at www.netgear.com/support. Troubleshooting 67 N300 Wireless Router Power LED Is Off or Blinking If the Power LED Make sure that the power adapter cord is securely connected to your router and securely is Off or blinking, try the following:
connected to a functioning power outlet. Make sure that you are using the power adapter cord that NETGEAR supplied for this product. If the Power LED blinks slowly and continuously, the router firmware is corrupted. This situation can happen if a firmware upgrade is interrupted, or if the router detects a problem with the firmware. If the error persists, you have a hardware problem. For recovery instructions or help with a hardware problem, contact technical support at www.netgear.com/support. Power LED Stays Amber When the router is turned on, the Power LED then turns green. If the LED does not turn green, the router has a problem. If the Power LED is still amber one minute after you turn on power to the router, try the following:
Unplug the routers power adapter cord. Plug it in again and see if the router recovers. To return the router to its factory settings, press and hold the Reset button. For more information, see Factory Settings on page turns amber for about 20 seconds and 76. If the error persists, you might have a hardware problem. Contact technical support at www.netgear.com/support. Internet LEDs Is Off If the Internet LED Make sure that the Ethernet cable is securely connected to the router Internet port and does not light, check the following:
the modem. Make sure that power is turned on to the connected modem. Be sure that you are using the correct cable. When you connect the routers Internet port to a cable or DSL broadband modem, use the cable that was supplied with the cable or DSL broadband modem. This cable can be a standard straight-through Ethernet cable or an Ethernet crossover cable. WiFi LED Is Off If the WiFi LED stays off, check to see if someone disabled the wireless radio or set up a wireless schedule. For more information about these settings, see Control the Wireless Radio on page 38. The WiFi LED is lit when the wireless radio is turned on. Troubleshooting 68 N300 Wireless Router Cannot Log In to the Router If you cannot log in to the router from a computer or wireless device on your local network, check the following:
1. Make sure that your computer or wireless device is connected to the routers network.
-
-
For a WiFi connection, select the network and entered its WiFi password. For a wired connection, use an Ethernet cable to connect your computer to an Ethernet LAN port on the router (not the Ethernet Internet port). 2. Launch a web browser and enter www.routerlogin.net. 3. If a login prompt does not display, try the following:
a. Close the browser and launch it again. b. Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet Explorer, click the Refresh button to be sure that the Java applet is loaded. c. If you are using a wired connection, check the Ethernet connection between the computer and the router. One of the router Ethernet LEDs show that your computer is connected. 4. If the login prompt displays, but you cannot log in, try the following:
a. Make sure that you are using the correct login information. lights to The user name is admin and the default password is password. Make sure that Caps Lock is off when you enter this information. b. If you customized the IP address scheme that the router uses, see Troubleshoot IP Addresses on page 73. The Router Cannot Access the Internet If you can log in to your router, but it cannot access the Internet, see if the router can obtain an IP address from your Internet service provider (ISP). Unless your ISP provides a fixed IP address, your router requests an IP address from the ISP. You can see if the request was successful using the Router Status screen. If you are attempting to set up your NETGEAR router as a replacement for an ADSL gateway in your network, the router cannot perform many gateway services. For example, the router cannot convert ADSL or cable data into Ethernet networking information. NETGEAR does not support such a configuration.
??? Should they first try the Setup Wizard before they go through all of this?
To check the WAN IP address:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. Troubleshooting 69 N300 Wireless Router A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Click the ADVANCED tab. 5. 6. The Router Status screen displays. In the Internet Port pane, check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router has not obtained an IP address from your ISP. For more information about the Internet Port pane, see Internet Port Pane on page If your router cannot obtain an IP address from the ISP, try to force your cable or DSL broadband modem to recognize your new router by restarting your network in this order:
a. Unplug and turn off the cable or DSL broadband modem. b. Unplug the router. c. Plug in the cable or DSL broadband modem and turn it on. d. Wait two minutes. e. Plug in the router and wait two minutes. 77. If your router is still unable to obtain an IP address from the ISP, the problem might be one of the following:
Your Internet service provider (ISP) might require a login program. Ask your ISP if it requires PPP over Ethernet (PPPoE) or some other type of login. If your ISP requires a login, the login name and password might be set incorrectly. Your ISP might check for your computers host name. Assign the computer host name of your ISP account as the account name in the Internet Setup screen. Your ISP allows only one Ethernet MAC address to connect to Internet and might check for your computers MAC address. In this case, do one of the following:
-
Inform your ISP that you have bought a new network device, and ask them to use the routers MAC address.
- Configure your router to clone your computers MAC address. Troubleshoot Internet Browsing If your router can obtain an IP address, but your computer is unable to load any web pages from the Internet, it might be for the following reasons:
Your computer might not recognize any DNS server addresses. Troubleshooting 70 N300 Wireless Router A DNS server is a host on the Internet that translates Internet names (such as www addresses) to numeric IP addresses. Typically, your ISP provides the addresses of one or two DNS servers for your use. If you entered a DNS address during the routers configuration, reboot your computer, and verify the DNS address. You can configure your computer manually with DNS addresses, as explained in your operating system documentation. Your computer might not have the router configured as its TCP/IP gateway. If your computer obtains its information from the router by DHCP, reboot the computer, and verify the gateway address. You might be running login software that is no longer needed. If your ISP provided a program to log you in to the Internet (such as WinPoET), you no longer need to run that software after installing your router. If you use Internet Explorer as your browser, you might need to select Tools > Internet Options, click the Connections tab, and select the Never dial a connection check box. Other browsers have similar options. Troubleshoot a PPPoE Internet Connection To troubleshoot a PPPoE Internet connection:
1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Click the ADVANCED tab. The Router Status screen displays. 5. On the Internet Port pane, click the Connection Status button. For more information, see Connection Status on page information, including valid IP addresses, your PPPoE connection is up and working. If any of the fields show incomplete information, or no valid IP address, you can attempt to reconnect by clicking the Connect button. The router continues to attempt to connect indefinitely. 79. If the fields show valid If you cannot connect after several minutes, you might be using an incorrect service name, user name, or password. There might also be a provisioning problem with your ISP. Troubleshooting 71 N300 Wireless Router Note: Unless you connect manually, the router does not authenticate using PPPoE until data is transmitted to the network. Troubleshoot Your Network Using the Ping Utility Most network devices and routers contain a ping utility that sends an echo request packet to the designated device. The device then responds with an echo reply. You can troubleshoot a network by using the ping utility on your computer or workstation. Test the LAN Path to Your Router You can ping the router from your computer to verify that the LAN path to your router is set up correctly. To ping the router from a computer running Windows:
1. From the Windows toolbar, click the Start button and select Run. 2. In the field provided, type ping followed by the IP address of the router, as in this example:
ping www.routerlogin.net 3. Click the OK button. You should see a message like this one:
Pinging <IP address > with 32 bytes of data If the path is working, you see this message:
Reply from < IP address >: bytes=32 time=NN ms TTL=xxx If the path is not working, you see this message:
Request timed out If the path is not functioning correctly, you might have one of the following problems:
Wrong physical connections For a wired connection, make sure that the numbered Ethernet port LED is lit for the port to which you are connected. Check that the appropriate LEDs are on for your network devices. If your router and computer are connected to a separate Ethernet switch, make sure that the link LEDs are lit for the switch ports that are connected to your computer and router. Wrong network configuration Verify that the Ethernet card driver software and TCP/IP software are both installed and configured on your computer. Troubleshooting 72 N300 Wireless Router Verify that the IP address for your router and your computer are correct and that the addresses are on the same subnet. Test the Path from Your Computer to a Remote Device After verifying that the LAN path works correctly, test the path from your computer to a remote device. 1. From the Windows toolbar, click the Start button and select Run. 2. In the field provided, type:
ping -n 10 <IP address>
where <IP address> is the IP address of a remote device such as your ISP DNS server. If the path is functioning correctly, replies like those examples shown in Test the LAN Path to Your Router on page If you do not receive replies, try the following:
Check that your computer has the IP address of your router listed as the default gateway. 72 are displayed. If a DHCP server assigns the IP configuration of your computer, this information is not visible on your computers Network Control Panel. Verify that the IP address of the router is listed as the default gateway. Check to see that the network address of your computer (the portion of the IP address specified by the subnet mask) is different from the network address of the remote device. Check that your cable or DSL broadband modem is connected and functioning. If your ISP assigned a host name to your computer, enter that host name as the account name in the Internet Settings screen. Your ISP might be rejecting the Ethernet MAC addresses of all but one of your computers. Many broadband ISPs restrict access by allowing traffic only from the MAC address of your broadband modem, but some ISPs additionally restrict access to the MAC address of a single computer connected to that modem. If this is the case, configure your router to clone or spoof the MAC address from the authorized computer. Troubleshoot IP Addresses By default, the router is set up to automatically assign IP addresses to network clients. The routers IP address is 192.168.1.1 unless you changed it. Wired and wirelessly connected computers must have network IP addresses on the same network as the router. The simplest way to meet this requirement is to configure each computer to obtain an IP address automatically using DHCP. If you customized the IP address settings of your router and youre having trouble with network connections, check the following:
Troubleshooting 73 N300 Wireless Router Make sure that your computers IP address is on the same subnet as the router. If you are using the recommended addressing scheme, your computers address is in the range of 192.168.1.2 to 192.168.1.254. If your computers IP address is shown as 169.254.x.x, recent versions of Windows and Mac OS generate and assign an IP address if the computer cannot reach a DHCP server. These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in this range, check the connection from the computer to the router, and reboot your computer. If your routers IP address was changed and you do not know the current IP address, clear the routers configuration to factory defaults. This sets the routers IP address to 192.168.1.1. This procedure is explained in Factory Settings on page 76. Troubleshooting 74 A. Supplemental Information A This appendix provides factory default settings and technical specifications for the N300 Wireless Router:
Factory Settings Technical Specifications 75 N300 Wireless Router Factory Settings You can return the router to its factory settings. Use the end of a paper clip or some other similar object to press and hold the WPS/Reset button on the back panel of the router for at least four seconds. The router resets, and returns to the factory settings that are shown in the following table. Table 4. Router factory default settings Feature Default Behavior Router login User login URL www.routerlogin.com or www.routerlogin.net Internet connection Local area network (LAN) User name (case-sensitive) admin Login password (case-sensitive) password WAN MAC address Use default hardware address WAN MTU size Port speed LAN IP Subnet mask DHCP server DHCP range Time zone 1500 AutoSensing 192.168.1.1 255.255.255.0 Enabled 192.168.1.2 to 192.168.1.254 United States is Pacific Time; otherwise, varies by region Time zone adjusted for daylight saving time Disabled Wireless Wireless communication Enabled SSID name Network key (password) Broadcast SSID Transmission speed Preset. For information, see the product label. Enabled Auto Note: Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput varies. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. United States in the US; otherwise, varies by region Country/region RF channel Operating mode Auto Up to 300 Mbps Supplemental Information 76 N300 Wireless Router Table 4. Router factory default settings (continued) Feature Wireless
(continued) Default Behavior 20/40 MHz coexistence Enabled Data rate Output power Best Full Technical Specifications Table 5. Router specifications Feature Description Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and SMB Power adapter Dimensions Weight North America: 120V, 60 Hz, input UK, Australia: 240V, 50 Hz, input Europe: 230V, 50 Hz, input All regions (output): 12 VDC @ 1A, output 217.74 x 147.73 x 34.92 mm (8.57 x 5.81 x 1.37 in.) 0.41 kg (0.91 lb) Operating temperature 0 to 40C
(32 to 104F) Operating humidity 90% maximum relative humidity, noncondensing Electromagnetic emissions LAN WAN Wireless FCC Part 15 Class B VCCI Class B EN 55 022 (CISPR 22), Class B C-Tick N10947 10BASE-T or 100BASE-Tx, RJ-45 10BASE-T or 100BASE-Tx, RJ-45 Maximum wireless signal rate complies with the IEEE 802.11 standard. See the entry for Transmission speed in Table 4 on page 76. Radio data rates Auto Rate Sensing Data encoding standards IEEE 802.11n version 2.0 IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz Maximum computers per wireless network Limited by the amount of wireless network traffic generated by each node
(typically 5070 nodes) Operating frequency range 2.4122.462 GHz (US) 2.4122.472 GHz (Japan) 2.4122.472 GHz (Europe ETSI) 802.11 security WEP, WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK mixed mode, WPA/WPA2 Enterprise Supplemental Information 77
1 | user manual statement | Users Manual | 575.64 KiB | May 05 2014 |
Notification of Compliance Regulatory Compliance Information This document includes user requirements for operating NETGEAR products in accordance with national laws including usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable national regulatory authority. The NETGEAR product firmware limits operation to only the channels allowed in a particular region or country. Therefore, all options described in this document may not be available in your version of the product. This document applies to both Class A and Class B devices:
Class A devices are intended to be used in a commercial or industrial environment. They are not intended to be used in a residential home or be available for general public use. Class B devices are intended to be used in a residential setting, and may also be used in commercial and industrial applications. Examples of Class B devices are telephones, personal computers, and residential data gateways. Fuses should only be installed by service personnel. NETGEAR recommends the use of 26 AWG or larger gauge phone line cords. Europe EU Declaration of Conformity This section applies to products bearing the CE or CE! mark:
Products bearing the CE or CE! mark comply with the following EU directives:
EMC Directive 2004/108/EC Low Voltage Directive 2006/95/EC Ecodesign Directive 2009/125/EC RoHS Directive 2011/65/EU If the product has telecommunications functionality, it also complies with the requirement of the following EU directive:
R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity. The EU CE Declaration of Conformity may be found at http://support.netgear.com/app/answers/detail/a_id/11621/. Caution for installing this equipment outdoors: (Valid in all EU member states, EFTA states, and Switzerland.) Be aware that outdoor installations require special attention and will only be handled by trained and qualified installation personnel. No one from the general public is permitted to install NETGEAR wireless products outdoors when external antennas, power and grounding must be installed for use. Particular attention has to be given allowed operational frequencies. Contact NETGEAR for instructions on how to contact an installer for outdoor operations if this product requires the special considerations for outdoor installations. For detailed iformation concerning installations in France, the user should contact the national spectrum authority in France (http://www.arcep.fr/ ) The following paragraphs apply to WN2500RP:
This device is a 2.4GHz and 5GHz wideband transmission system (transceiver), intended for indoor use only in all EU member states, EFTA states, and Switzerland. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for applying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10mW EIRP in the frequency range of 2454-2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. Warning NETGEAR Class A products that may be utilized in domestic/residential environments may cause radio interference in which case the user may be required to take adequate measures. FCC Requirements for Operation in the United States Information in this section applies to products bearing the FCC mark (or statement):
FCC Information to User This NETGEAR product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. The following statement applies to these products:
A6210 C6300 C6300XB3 D6200v2 EX6100 EX6200 HMNC100 JR6150 JWNR2000v5 JWNR2010v5 R6050 STS7000 VEGN2200 WN370 WN2500RP WN3000RPv2 WN3500RP WNR2010 WNR2020 WNR614 WNR618 This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. FCC Guidelines for Human Exposure The NETGEAR product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. The following statement applies to this product:
C6300XB3 This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with minimum distance of 25 cm between the radiator and your body. FCC Declaration of Conformity We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that this product complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions:
The device may not cause harmful interference, and The device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference Warnings & Instructions The NETGEAR product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods:
Reorient or relocate the receiving antenna. Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is Increase the separation between the equipment and the receiver. connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure and SAR Statements The information in this section applies to products that transmit data or communicate wirelessly. SAR Statement The information in this section applies to NETGEAR wireless products that are intended to be operated close to human body. NETGEAR products that are intended to be operated close to the human body are tested for body-worn Specific Absorption Rate (SAR) compliance. The SAR limit set by the FCC is 1.6 W/kg. The FCC has established detailed SAR requirements and NETGEAR products meet these requirements. NETGEAR products comply with ANSI/IEEE C95.1-1999 and are tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. NETGEAR products that are installed in USB ports demonstrate SAR compliance using a typical laptop computer with a USB port. Other applications, such as handheld computers or similar devices, have not been verified and might not compliance with related RF exposure rule and such use is prohibited. RF Exposure Information NETGEAR products have been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the requirements as set forth in CFR 47 Sections, 2.1093, and 15.247 (b) (4) addressing RF exposure from radio frequency devices. NETGEAR products meet the applicable government requirements for exposure to radio frequency waves. To see the test results reporting the highest SAR level measured for this device, visit http://www.netgear.com/about/regulatory/declarations-conformity/
Radiation exposure: NETGEAR products comply with radiation exposure limits set forth for an uncontrolled environment and meet radio frequency (RF) exposure guidelines for wireless routers. NETGEAR products should be installed and operated keeping the product 20cm or more away from a persons body. For devices that are battery powered and may be operated closer than 20cm to you, refer to the NETGEAR website for exposure levels. NETGEAR USB dongle transmitters are approved for use in typical laptop computers. To comply with FCC RF exposure requirements, do not use NETGEAR USB dongle transmitters in other devices or certain laptop and tablet computer configurations where the USB connectors on the host computer are unable to provide or ensure the necessary operating configurations intended for the device and its users or bystanders to satisfy RF exposure compliance requirements. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. NETGEAR products comply with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) NETGEAR products may not cause harmful interference, and (2) NETGEAR products must accept any interference received, including interference that may cause undesired operation. For products available in the USA market, only channel 1~11 can be operated. Selection of other channels is not possible. The following statement applies to these products:
A6210 C6300 D6200v2 EX6100 EX6200 HMNC100 JR6150 JWNR2000v5 JWNR2010v5 R6050 VEGN2200 WAC120 WN370 WN2500RP WN3000RPv2 WN3500RP WNR2010 WNR2020 WNR614 WNR618 The device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. The following statement applies to these products:
R6050 STS7000 WN2500RP A6210 C6300 C6300XB3 D6200v2 EX6100 EX6200 HMNC100 JR6150 The device operates in 5.15~5.25GHz frequency range. It is restricted in indoor environment only. The following statement applies to this product:
WAC120 The device operates in 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range. It is restricted in indoor environment only. Non-DFS Warning NETGEAR non-DFS products do not support operation in the 5600-5650MHz band. The firmware on the device restricts the operation in this frequency band and does not utilize the channels in this band. NETGEAR non-DFS products will not permit operations on channels 120132 for 11a and 11n/a, which overlap the 56005650MHz band. The following statements apply to these products:
HMNC100 NETGEAR DFS products do not support operation in the 5600-5650MHz band. The firmware on the device restricts the operation in this frequency band and does not utilize the channels in this band. NETGEAR DFS products will not permit operations on channels 120132 for 11a and 11n/a, which overlap the 5600 5650MHz band. Country Code Selection Usage (WLAN devices) The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. TV Tuner (on Selected Models) The information in this section applies to NETGEAR products incorporating a TV tuner. Note to CATV System Installer: This reminder is provided to call the CATV system installers attention to Section 820-
93 of the National Electrical Code, which provides guidelines for proper grounding and, in particular, specifies that the Coaxial cable shield be connected to the grounding system of the building as close to the point of cable entry as possible. Canadian Department of Communications Radio Interference Regulations The information in this section applies to products bearing the statements:. This digital apparatus does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Cet appareil numrique ne dpasse pas les limites de la classe B pour les missions radio bruit des appareils numriques, tel qu'nonc dans le Rglement sur le brouillage radiolectrique du ministre des Communications du Canada. CAN ICES-3 (B)/NMB-3(B) CAN ICES-3 (A)/NMB-3(A) Industry Canada NETGEAR products comply with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) NETGEAR products may not cause harmful interference, and (2) NETGEAR products must accept any interference received, including interference that may cause undesired operation. A6210 HMNC100 JR6150 WNR2010 WNR2020 WNR614 JWNR2000v5 JWNR2010v5 R6050 WAC120 WN370 WNR618 Ce dispositif est conforme la norme CNR d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. JR6150 JWNR2000v5 JWNR2010v5 A6210 HMNC100 R6050 WAC120 WN370 WNR2010 WNR2020 WNR614 WNR618 IMPORTANT NOTE: Radiation Exposure Statement NETGEAR products comply with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR products should be installed and operated with minimum distance 20cm between the radiator and your body. NETGEAR products comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in its manual. Further RF exposure reduction can be achieved by keeping the product as far as possible from your body or by setting the device to a lower output power if such a function is available. For products available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. The following statement applies to these products:
A6210 D6200v2 EX6100 EX6200 HMNC100 JR6150 JWNR2000v5 JWNR2010v5 R6050 STS7000 VEGN2200 WN370 WN2500RP WN3000RPv2 WNR2010 WNR2020 WNR614 WNR618 The device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. The following statement applies to these products:
A6210 D6200v2 EX6100 EX6200 HMNC100 JR6150 WAC120 WN2500RP R6050 STS7000 The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-
channel mobile satellite systems. DFS warning:
NETGEAR DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-
5600MHz, and 5650-5725MHz:
The following statements apply to this product:
A6210 C6300XB3 HMNC100 WAC120 STS7000 The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz to comply with the EIRP (Equivalent Isotropically Raditaed Power) limit. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. The following statement applies to this product:
WAC120 The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the EIRP (Equivalent Isotropically Raditaed Power) limits specified for point-to-point and non point-to-point operation as appropriate. SAR warning:
NETGEAR product is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. NOTE IMPORTANTE: Dclaration d'exposition aux radiations Produits NETGEAR sont conformes aux limites IC d'exposition aux rayonnements dfinies pour un environnement non contrl. Produits NETGEAR doivent tre installs et utiliss avec distance minimum de 20cm entre le radiateur et votre corps. Produits NETGEAR sont conformes la limite d'exposition aux RF portable Canada tablies pour un environnement non contrl et sont sans danger pour le fonctionnement prvu comme dcrit dans le manuel. Poursuite de la rduction de l'exposition aux RF peut tre ralis en gardant le produit autant que possible de votre corps ou par le rglage du dispositif une puissance de sortie infrieure si une telle fonction est disponible Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection d'autres canaux n'est pas possible. La dclaration suivante s'applique ces produits:
A6210 D6200v2 EX6100 EX6200 R6050 STS7000 VEGN2200 WN370 WNR614 WNR618 HMNC100 JR6150 JWNR2000v5 JWNR2010v5 WN2500RP WN3000RPv2 WNR2010 WNR2020 Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. La dclaration suivante s'applique ces produits:
A6210 D6200v2 EX6100 EX6200 HMNC100 R6050 STS7000 JR6150 WAC120 WN2500RP les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. DFS avertissement:
Slection dynamique de frquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-
5600 MHz et 5650-5725 MHz :
Les instructions suivantes s'appliquent ce produit:
A6210 C6300XB3 HMNC100 WAC120 STS7000 le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e. De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. La dclaration suivante s'applique ce produit;
WAC120 Avertissement SAR:
NETGEAR est le respect de SAR pour la population gnrale / limites d'exposition incontrle de CNR-102 et a t test en conformit avec les mthodes et procdures de mesure spcifies dans la norme IEEE 1528. Interference Reduction Table The table below shows the Recommended Minimum Distance between NETGEAR equipment and household appliances to reduce interference (in feet and meters). Household Appliance Microwave oven Recommended Minimum Distance (in feet and meters) 30 feet / 9 meters Baby monitor analog Baby monitor digital Cordless phone analog Cordless phone digital Bluetooth device ZigBee 20 feet / 6 meters 40 feet / 12 meters 20 feet / 6 meters 30 feet / 9 meters 20 feet / 6 meters 20 feet / 6 meters Japan Notices VCCI This information in this section applies to products bearing the VCCI mark:
Class A ITE A Class B ITE B Japan Wireless Notice South Korea Notices The information in this section applies to products bearing the KCC mark:
:
Class A :
A
( ) Class B :
B
( )
(A)
, .
(B)
, . Taiwan WWAN Wireless Notice The information in this section applies to products bearing the Taiwan National Communications Commission mark:
This telecom equipment has complied with NCC regulations. 5.25-5.35 Thailand Notice The information in this section applies to products approved by the Thailand National Communications Commission:
. China Notices The information in this section applies to products bearing the Chinese Complusory Certification Mark:
This device complies with the requirements in China for Safety and Quality A Australia and New Zealand Notices The information in this section applies to products bearing the Australia C-Tick and A-Tick Compulsory Marks:
This device equipment complies with the Australian and New Zealand regulatory approvals requirements. Warning NETGEAR Class A products that may be utilized in domestic/residential environments may cause radio interference in which case the user may be required to take adequate measures. Powerline Device Safety Information Follow these safety guidelines to ensure your own personal safety and to help protect your system from potential damage:
For national approvals (approval schemes other than CB), relevant national standards for plug, socket-
outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such products according to the national standards. Check the electrical current for any device plugged into the filtered AC socket. Do not exceed home and product outlet ratings and electrical requirements. The socket-outlet shall be installed near the equipment and be easily accessible Only power cords and allowed to be inserted into the filtered AC socket; no other equipment with a direct plug-in is allowed. Power cords needs to be a maximum of 1m long and a minimum of 0.75mm of cross-
sectional area. Do not plug devices into the Powerline Pass Thru Adapter filtered AC outlet that exceed the product ratings. The output voltage of the filtered AC outlet is the same as the power outlet that the Powerline Pass Thru Adapter is plugged into. To help avoid damaging your system, be sure that the attached devices are electrically rated to operate with the power available in your location. If the input AC voltage is less than 100 Vac, the device plugged into the filtered AC socket of the Powerline Pass Thru Adapter might not perform as well as expected. DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an attached power strip. The device is not intended to be used with home appliances such as air conditioners, power tools, space heaters, fans hair dryers, ovens, or refrigerators. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Do not service any product except as explained in your system documentation. Opening or removing covers that are marked with the triangular symbol with a lightning bolt can expose you to electrical shock. Only a trained service technician should service components inside these compartments. Use the product only with approved equipment. Allow the products to cool before removing covers or touching internal components. To help avoid damaging your system, be sure that the voltage selection switch (if provided) on the power supply is set o match the power available at your location:
o o o 110 volts (V), 60 hertz (Hz) in most of North and South America and some Far Eastern countries such as south Korea and Taiwan 100, 50 Hz in eastern Japan and 100, 60Hz in western Japan 230v, 50Hz in most of Europe, the Middle East, and the Far East The peripheral power cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable. Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for te extension cable or power strip. To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS). Rack Mount Safety Instructions This information applies to the installation of NETGEAR rack mount products Ambient operating temperature. If the switch is installed in a closed or multiunit rack assembly, the ambient operating temperature of the rack environment might be greater than the ambient temperature of the room. Therefore, consider installing the equipment in an environment compatible with the maximum rated ambient temperature. Reduced airflow. Mount the equipment into a rack so that the amount of airflow required for safe operation is not compromised. Mechanical loading. Mount the equipment into a rack so that a hazardous condition does not arise due to uneven mechanical loading. Circuit overloading. Consider the equipments connection to the power supply circuitry and the effect that any possible overloading of circuits might have on overcurrent protection and power supply wiring. Consider equipment nameplate ratings when addressing this concern. Reliable grounding. This product requires reliable grounding to be maintained at all times. To ensure this, ground the rack itself. Pay particular attention to power supply connections other than the direct connections to the branch circuit (for example, the use of power strips). Clearance. Leave enough clearance in front of the rack (about 25 inches) to enable you to open the front door completely and in the back of the rack (about 30 inches) to allow for sufficient airflow and ease in servicing. NETGEAR, Inc., 350 E. Plumeria Avenue, San Jose, CA 95134 USA April 2014
1 | internal photos | Internal Photos | 1.46 MiB |
Photographs of EUT Model: WNR614 Project No.: EP3N1403-01 Page No. : 1 of 8 Model: WNR618 Project No.: EP3N1403-01 Page No. : 2 of 8 Model: WNR2020 Project No.: EP3N1403-01 Page No. : 3 of 8 Model: JWNR2000v5 Project No.: EP3N1403-01 Page No. : 4 of 8 Model: JWNR2010v5, WNR2010 Project No.: EP3N1403-01 Page No. : 5 of 8 Project No.: EP3N1403-01 Page No. : 6 of 8 Project No.: EP3N1403-01 Page No. : 7 of 8 Project No.: EP3N1403-01 Page No. : 8 of 8
1 | external photos | External Photos | 2.09 MiB |
Photographs of EUT Model: WNR614 Project No.: EP3N1403-01 Page No. : 1 of 14 Project No.: EP3N1403-01 Page No. : 2 of 14 Model: WNR618 Project No.: EP3N1403-01 Page No. : 3 of 14 Project No.: EP3N1403-01 Page No. : 4 of 14 Model: WNR2020 Project No.: EP3N1403-01 Page No. : 5 of 14 Project No.: EP3N1403-01 Page No. : 6 of 14 Model: JWNR2000v5 Project No.: EP3N1403-01 Page No. : 7 of 14 Project No.: EP3N1403-01 Page No. : 8 of 14 Model: JWNR2010v5, WNR2010 Project No.: EP3N1403-01 Page No. : 9 of 14 Project No.: EP3N1403-01 Page No. : 10 of 14 Project No.: EP3N1403-01 Page No. : 11 of 14 Project No.: EP3N1403-01 Page No. : 12 of 14 Project No.: EP3N1403-01 Page No. : 13 of 14 Project No.: EP3N1403-01 Page No. : 14 of 14
1 | label | ID Label/Location Info | 286.00 KiB | May 05 2014 |
REV DESCRIPTION OF REVISION ENG APPD DATE 01 INITIAL DOCUMENT CREATION R HU 30MAR14 JWNR2000v5 7 PANTONE 430C WHITE NOTE:
1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). AUTHOR:
SHEET:
R HU 1 of 1 TITLE:
AW,WNR2020NA,PLBL THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. P/N:
AW-12887-02 REV:
01
1 | Power of Attorney Letter | Cover Letter(s) | 116.14 KiB | / May 05 2014 |
ETGEAR Inc. ETGEAR NETGEAR Inc. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. Date: 2014/4/23 Date:
2014/4/23 Federal Communications Commission Federal Communications Commission Federal Communications Commission Federal Communications Commission 7435 Oakland Mills Rd 7435 Oakland Mills Rd 7435 Oakland Mills Rd Columbia MD 21046 Columbia MD 21046 Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter Subject: Product Certification Representative Authorization Letter Subject: Product Certification Representative Authorization Letter Subject: Product Certification Representative Authorization Letter Subject: Product Certification Representative Authorization Letter Subject: Product Certification Representative Authorization Letter FCC ID: PY314100257 FCC ID:
PY314100257 To whom it may concern:
To whom it may concern:
To whom it may concern:
e the undersigned, hereby authorize following person to act as our agent in the preparation of an application We the undersigned, hereby authorize following person to act e the undersigned, hereby authorize following person to act e the undersigned, hereby authorize following person to act e the undersigned, hereby authorize following person to act e the undersigned, hereby authorize following person to act as our agent in the preparation of an application as our agent in the preparation of an application as our agent in the preparation of an application as our agent in the preparation of an application for equipment authorization o the FCC Rules and Regulations. for equipment authorization o the FCC Rules and Regulations. for equipment authorization o the FCC Rules and Regulations. for equipment authorization o the FCC Rules and Regulations. for equipment authorization o the FCC Rules and Regulations. for equipment authorization o the FCC Rules and Regulations. International Certification Corp. International Certification Corp. International Certification Corp. International Certification Corp. Address ddress Name Job Title itle e-mail
:
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan 1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan 1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan 1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan 1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan 1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan 1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan 1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang, Tao Yuan Hsein 333, Taiwan
(R.O.C.)
(R.O.C.)
: Gary Chang Gary Chang
: Manager Manager
: garychang garychang@icertifi.com.tw
@icertifi.com.tw Webs Webs certifies that neither t We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. e further certifies that neither t he applicant nor any party to this application, as defined in 47 CFR Ch. he applicant nor any party to this application, as defined in 47 CFR Ch. he applicant nor any party to this application, as defined in 47 CFR Ch. he applicant nor any party to this application, as defined in 47 CFR Ch. he applicant nor any party to this application, as defined in 47 CFR Ch. he applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the 1.2002(b), is subject to a 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). Drug Abuse Act of 1998, 21 U.S.C. 835(a). Drug Abuse Act of 1998, 21 U.S.C. 835(a). Drug Abuse Act of 1998, 21 U.S.C. 835(a). Drug Abuse Act of 1998, 21 U.S.C. 835(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the This appointment also This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the includes the authority to complete FCC Form 731 on our behalf and sign the includes the authority to complete FCC Form 731 on our behalf and sign the includes the authority to complete FCC Form 731 on our behalf and sign the includes the authority to complete FCC Form 731 on our behalf and sign the includes the authority to complete FCC Form 731 on our behalf and sign the includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. application as an authorized agent. application as an authorized agent. application as an authorized agent. Applicant Applicant Address Address Signature Signature Name and Job Title. Name and Job
. E-mail Tel.
:
: NETGEAR, Inc. NETGEAR, Inc.
: 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA _________________________________ _________________________________ _________________________________ _________________________________
: David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager
: David.Kay@Netgear.com David.Kay@Netgear.com David.Kay@Netgear.com
: 408-890 890-3160
1 | RF exposure | RF Exposure Info | 237.13 KiB | / May 05 2014 |
FCC RF Exposure Report FCC ID
: PY314100257 Equipment
: N300 Wireless Router Model No.
: JWNR2010v5
(Please refer to 1.1.1 for more details.) Brand Name
: NETGEAR Applicant Address
: NETGEAR, Inc.
: 350 East Plumeria Drive, San Jose, California 95134, USA Standard
: 47 CFR FCC Part 2.1091 Received Date
: Mar. 20, 2014 Tested Date
: Mar. 20 ~ Apr. 11, 2014 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by:
Gary Chang / Manager Ty: XXX Report No.: FA3N1403-01 Report Version: Rev. 02 Page : 1 of 6 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 4 1.1 Information .............................................................................................................................................. 4 MPE EVALUATION OF MOBILE DEVICES ......................................................................................... 5 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE............................................. 5 MPE EVALUATION FORMULA ............................................................................................................. 5 MPE EVALUATION RESULTS .............................................................................................................. 5 TEST LABORATORY INFORMATION ................................................................................................. 6 2 2.1 2.2 2.3 3 Report No.: FA3N1403-01 Report Version: Rev. 02 Page : 2 of 6 Release Record Report No. Version Description FA3N1403-01 Rev. 01 Initial issue Issued Date Apr. 25, 2014 FA3N1403-01 Rev. 02 Modified product name (page 1 & 4.) Apr. 28, 2014 Report No.: FA3N1403-01 Report Version: Rev. 02 Page : 3 of 6 1 General Description 1.1 Information 1.1.1 Product Details The following models are provided to this EUT. Brand Name Model Name Product Name NETGEAR WNR614 WNR618 WNR2020 JWNR2000v5 JWNR2010v5 WNR2010 N300 Wireless Router Description Ext. Ant. Housing 2 x 2dBi Housing1, White color 2 x 5dBi Housing1, Black color 2 x 5dBi Housing2, White color 2 x 2dBi Housing2, Black color 2 x 5dBi Housing2, Black color 2 x 5dBi Housing2, Black color Differnece between each model is only external antenna and housing. PCB board of each model is identical. The above models, model JWNR2010v5 was selected as a representative one for the final test and only its data was recorded in this report. 1.1.2 Antenna Details Ant. No. 1 2 Type dipole dipole Gain (dBi) Connector Remark 5dBi 2dBi
---
---
---
---
Report No.: FA3N1403-01 Report Version: Rev. 02 Page : 4 of 6 2 MPE EVALUATION OF MOBILE DEVICES Human exposure to RF emissions from mobile devices (47 CFR 2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. 2.1 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE Frequency Range (MHz) Power Density (mW /cm2) Averaging Time (minutes) 300~1500 1500~100000 F/1500 1.0 30 30 2.2 MPE EVALUATION FORMULA Pd =
Where Pd= Power density in mW/cm2 Pt= EIRP in mW Pi= 3.1416 R= Measurement distance 2.3 MPE EVALUATION RESULTS Frequency Range (MHz) Maximum Conducted Power (dBm) 2412~2462 21.75 Antenna Gain Distance
(dBi) 5
(cm) 20 Power Density
(mW/cm2) Limit (mW/cm2) 0.094 1 Report No.: FA3N1403-01 Report Version: Rev. 02 Page : 5 of 6 2**4RPiPt 3 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp, it is our definitive objective is to institute long term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan Hsiang. Location map can be found on our website http://www.icertifi.com.tw. Linkou Tel: 886-2-2601-1640 Kwei Shan Tel: 886-3-271-8666 No. 30-2, Ding Fwu Tsuen, Lin Kou District, New Taipei City, Taiwan, R.O.C. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. If you have any suggestion, please feel free to contact us as below information Tel: 886-3-271-8666 Fax: 886-3-318-0155 Email: ICC_Service@icertifi.com.tw END Report No.: FA3N1403-01 Report Version: Rev. 02 Page : 6 of 6
1 | ad hoc declaration letter | Cover Letter(s) | 152.38 KiB | / May 05 2014 |
ETGEAR Inc. ETGEAR NETGEAR Inc. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, 350 East Plumeria Drive San Jose, 350 East Plumeria Drive San Jose, CA 95134 U.S.A. CA 95134 U.S.A. Date: April 23, 2014 April 23, 2014 Subject: Ad Hoc Mode Function Declaration Subject: Ad Hoc Mode Function Declaration Subject: Ad Hoc Mode Function Declaration Subject: Ad Hoc Mode Function Declaration Subject: Ad Hoc Mode Function Declaration To whom it may concern, it may concern, it may concern, We, NETGEAR, Inc. NETGEAR, Inc. country code selection in all the operational mode(s) for the following product. country code selection in all the operational mode(s) for the following product. country code selection in all the operational mode(s) for the following product. country code selection in all the operational mode(s) for the following product. country code selection in all the operational mode(s) for the following product. country code selection in all the operational mode(s) for the following product. country code selection in all the operational mode(s) for the following product. country code selection in all the operational mode(s) for the following product. country code selection in all the operational mode(s) for the following product. declare that the device does not support any non-US channels and declare that the device does not support any non declare that the device does not support any non declare that the device does not support any non declare that the device does not support any non declare that the device does not support any non US channels and US channels and PY314100257 FCC ID: PY314100257 PY314100257 IC : 4054A-
-14100257 Regards, Applicants company name Applicants company name Applicants company name
:
: NETGEAR, NETGEAR, Inc. Applicants company address Applicants company address
: 350 East Plumeria Drive, San Jose, California 95134, USA
:
East Plumeria Drive, San Jose, California 95134, USA East Plumeria Drive, San Jose, California 95134, USA East Plumeria Drive, San Jose, California 95134, USA East Plumeria Drive, San Jose, California 95134, USA East Plumeria Drive, San Jose, California 95134, USA Signature
:
:
Name and Job Title Name and Job Title
: David Kay / Regulatory Compliance Manager
:
David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager E-Mail Tel.
: David.Kay@Netgear.com
:
David.Kay@Netgear.com David.Kay@Netgear.com
:
: 408-890-3 3160
1 | request for confidentiality | Cover Letter(s) | 131.62 KiB | / May 05 2014 |
ETGEAR Inc. ETGEAR NETGEAR Inc. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. 350 East Plumeria Drive San Jose, CA 95134 U.S.A. Date: April 23, 2014 April 23, 2014 April 23, 2014 term confidentiality request on the following attachments
-term confidentiality for 180 days. equest on the following attachments for 180 days. equest on the following attachments equest on the following attachments Federal Communications Commission Federal Communications Commission Federal Communications Commission Federal Communications Commission Authorization and Evaluation Division Authorization and Evaluation Division Authorization and Evaluation Division Authorization and Evaluation Division 7435 Oakland Mills Rd 7435 Oakland Mills Rd Columbia MD 21046-1609 Columbia MD 21046 1609 Subject: Request for confidentiality Subject: Request for confidentiality FCC ID: PY314100257 PY314100257 PY314100257 To whom it may concern To whom it may concern To whom it may concern:
Short-term confidentiality term confidentiality term confidentiality public notice, in order to comply with the marketing regulations in Pursuant to DA 04-1705 of the Commissions Pursuant to DA 04 1705 of the Commissions public 1705 of the Commissions in order to comply with the marketing regulations in in order to comply with the marketing regulations in in order to comply with the marketing regulations in in order to comply with the marketing regulations in in order to comply with the marketing regulations in 2.803 and the importation rules in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information 47CFR 2.803 and the importation rules in 47 CFR 2.803 and the importation rules in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information 2.1204, while ensuring that business sensitive information 2.1204, while ensuring that business sensitive information 2.1204, while ensuring that business sensitive information 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to remains confidential until the actual marketing of newly authorized devices. We are requesting remains confidential until the actual marketing of newly authorized devices. We are requesting remains confidential until the actual marketing of newly authorized devices. We are requesting remains confidential until the actual marketing of newly authorized devices. We are requesting remains confidential until the actual marketing of newly authorized devices. We are requesting remains confidential until the actual marketing of newly authorized devices. We are requesting remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to the commission to grant short-
Internal Photographs Internal Photographs Internal Photographs External Photographs External Photographs External Photographs User's manual User's manual Test Set up photo Test Set up photo Permanent Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential Pursuant to Sections 0.457 and 0.459 of the Commission Pursuant to Sections 0.457 and 0.459 of the Commission Pursuant to Sections 0.457 and 0.459 of the Commission Pursuant to Sections 0.457 and 0.459 of the Commission s Rules, the Applicant Hereby requests confidential s Rules, the Applicant Hereby requests confidential s Rules, the Applicant Hereby requests confidential s Rules, the Applicant Hereby requests confidential s Rules, the Applicant Hereby requests confidential treatment of information treatment of information treatment of information accompanying Block Diagram Diagram Schematics Schematics Operation description Operation description Operation description The above materials contain trade secrets and proprietary information not customarily released to the The above materials contain trade secrets and proprietary information not customarily released to the The above materials contain trade secrets and proprietary information not customarily released to the The above materials contain trade secrets and proprietary information not customarily released to the The above materials contain trade secrets and proprietary information not customarily released to the The above materials contain trade secrets and proprietary information not customarily released to the The above materials contain trade secrets and proprietary information not customarily released to the The above materials contain trade secrets and proprietary information not customarily released to the The above materials contain trade secrets and proprietary information not customarily released to the public. ant and provide unjustified benefits to its ant and provide unjustified The public disclosure of these materials may be harmful to the applicant and provide unjustified The public disclosure of these materials may be harmful to the applic The public disclosure of these materials may be harmful to the applic The public disclosure of these materials may be harmful to the applic The public disclosure of these materials may be harmful to the applic The public disclosure of these materials may be harmful to the applic benefits to its benefits to its competitors. competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this applica accompanying documentation will not be made before the date of the Grant for this applica accompanying documentation will not be made before the date of the Grant for this applica accompanying documentation will not be made before the date of the Grant for this applica accompanying documentation will not be made before the date of the Grant for this applica accompanying documentation will not be made before the date of the Grant for this applica accompanying documentation will not be made before the date of the Grant for this applica accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Should you require any further information, please contact the undersigned. Should you require any further information, please contact the undersigned. Should you require any further information, please contact the undersigned. Should you require any further information, please contact the undersigned. Should you require any further information, please contact the undersigned. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Thank you for your consideration in this matter. Thank you for your consideration in this matter. Thank you for your consideration in this matter. accompanying this Application As outlined below:
this Application As outlined below:
this Application As outlined below:
this Application As outlined below:
confidentiality confidentiality Applicant Applicant Address Address Signature Signature Name and Job Title Name and Job itle. E-mail mail Tel.
:
NETGEAR, Inc.
: NETGEAR, Inc.
: 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA 350 East Plumeria Drive, San Jose, California 95134, USA _________________________________ _________________________________ _________________________________ _________________________________ _________________________________
: David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager David Kay / Regulatory Compliance Manager
: David.Kay@Netgear.com David.Kay@Netgear.com David.Kay@Netgear.com
: 408-890 890-3160
1 | test report | Test Report | 3.69 MiB | / May 05 2014 |
FCC Test Report FCC ID
: PY314100257 Equipment
: N300 Wireless Router Model No.
: JWNR2010v5
(Please refer to 1.1.1 for more details.) Brand Name
: NETGEAR Applicant Address
: NETGEAR, Inc.
: 350 East Plumeria Drive, San Jose, California 95134, USA Standard
: 47 CFR FCC Part 15.247 Received Date
: Mar. 20, 2014 Tested Date
: Mar. 20 ~ Apr. 11, 2014 We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by:
Gary Chang / Manager Ty: XXX Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 1 of 63 Table of Contents GENERAL DESCRIPTION .................................................................................................................... 5 Information .............................................................................................................................................. 5 Local Support Equipment List ................................................................................................................ 8 Test Setup Chart .................................................................................................................................... 8 The Equipment List ................................................................................................................................ 9 Test Standards ..................................................................................................................................... 10 Measurement Uncertainty .................................................................................................................... 10 TEST CONFIGURATION ..................................................................................................................... 11 Testing Condition ................................................................................................................................. 11 The Worst Test Modes and Channel Details ....................................................................................... 11 TRANSMITTER TEST RESULTS ........................................................................................................ 12 Conducted Emissions ........................................................................................................................... 12 6dB and Occupied Bandwidth .............................................................................................................. 15 RF Output Power .................................................................................................................................. 18 Power Spectral Density ........................................................................................................................ 20 Unwanted Emissions into Restricted Frequency Bands ...................................................................... 22 Emissions in Non-Restricted Frequency Bands ................................................................................... 50 TEST LABORATORY INFORMATION ............................................................................................... 63 1 1.1 1.2 1.3 1.4 1.5 1.6 2 2.1 2.2 3 3.1 3.2 3.3 3.4 3.5 3.6 4 Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 2 of 63 Release Record Report No. Version Description FR3N1403-01 Rev. 01 Initial issue Issued Date Apr. 25, 2014 FR3N1403-01 Rev. 02 Modified product name (page 1 & 5.) Apr. 28, 2014 Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 3 of 63 Summary of Test Results FCC Rules Test Items Measured 15.207 Conducted Emissions 15.247(d) 15.209 Radiated Emissions 15.247(b)(3) Fundamental Emission Output Power
[dBuV]: 0.153MHz 46.30 (Margin -9.54dB) - AV
[dBuV/m at 3m]: 2483.50MHz 53.95 (Margin -0.05dB) - AV Power [dBm]:
11b: 18.74 11g: 21.75 HT20: 21.68 HT40: 18.40 15.247(a)(2) 6dB Bandwidth Meet the requirement of limit 15.247(e) Power Spectral Density Meet the requirement of limit 15.203 Antenna Requirement Meet the requirement of limit Result Pass Pass Pass Pass Pass Pass Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 4 of 63 1 General Description 1.1 Information 1.1.1 Product Details The following models are provided to this EUT. Brand Name Model Name Product Name NETGEAR WNR614 WNR618 WNR2020 JWNR2000v5 JWNR2010v5 WNR2010 N300 Wireless Router Description Ext. Ant. Housing 2 x 2dBi Housing1, White color 2 x 5dBi Housing1, Black color 2 x 5dBi Housing2, White color 2 x 2dBi Housing2, Black color 2 x 5dBi Housing2, Black color 2 x 5dBi Housing2, Black color Differnece between each model is only external antenna and housing. PCB board of each model is identical. The above models, model JWNR2010v5 was selected as a representative one for the final test and only its data was recorded in this report. 1.1.2 Specification of the Equipment under Test (EUT) RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Freq. (MHz) Channel Number Transmit Chains (NTX) 2400-2483.5 2400-2483.5 b g 2412-2462 1-11 [11]
2412-2462 1-11 [11]
2400-2483.5 n (HT20) 2412-2462 1-11 [11]
2400-2483.5 n (HT40) 2422-2452 3-9 [7]
2 2 2 2 Data Rate /
MCS 1-11 Mbps 6-54 Mbps MCS 0-15 MCS 0-15 Note 1: RF output power specifies that Maximum Conducted (Average) Output Power. Note 2: 802.11b uses a combination of DSSS-DBPSK, DQPSK, CCK modulation. Note 3: 802.11g/n uses a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM modulation. 1.1.3 Antenna Details Ant. No. 1 2 Type dipole dipole Gain (dBi) Connector Remark 5dBi 2dBi
---
---
---
---
1.1.4 Power Supply Type of Equipment under Test (EUT) Power Supply Type 5Vdc from adapter Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 5 of 63 1.1.5 Accessories No. Equipment Description Accessories 1 AC Adapter Brand Name: AC-DC ADAPTER Model Name: AD2015F20 P/N: 332-10727-01 Power Rating: I/P: 100-240Vac, 50-60Hz, 0.15A O/P: 5.0Vdc, 0.7A Power Line: 1.28m non-shielded cable w/o core Brand Name: LEADER ELECTRONICS INC. Model Name: MU03B5050070-A1 2 AC Adapter P/N: 332-10669-01 Power Rating: I/P: 100-240Vac, 50-60Hz, 0.15A O/P: 5.0Vdc, 0.7A Power Line: 1.2m non-shielded cable w/o core 3 RJ45 Cable 0.9m non-shielded w/o core. 1.1.6 Channel List Frequency band (MHz) 802.11 b / g / n HT20 2400~2483.5 802.11n HT40 Channel Frequency(MHz) Channel Frequency(MHz) 1 2 3 4 5 6 7 8 9 10 11 Report No.: FR3N1403-01 Report Version: Rev. 02 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 3 4 5 6 7 8 9
---
---
---
---
2422 2427 2432 2437 2442 2447 2452
---
---
---
---
Page : 6 of 63 1.1.7 Test Tool and Duty Cycle Test Tool MT7620QA.exe, Ver. V1.0.6.0 AP [BBP 0104][RF 0104]
Mode 11b 11g HT20 HT40 Duty cycle (%) Duty factor (dB) 100.00%
100.00%
100.00%
100.00%
0.00 0.00 0.00 0.00 Duty Cycle and Duty Factor 1.1.8 Power Setting Modulation Mode Test Frequency (MHz) Power Set 11b 11b 11b 11g 11g 11g HT20 HT20 HT20 HT40 HT40 HT40 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 11/11 11/11 11/12 10/10 1A/1C 15/16 0E/0E 1A/1C 11/12 0A/0A 12/13 0D/0E Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 7 of 63 1.2 Local Support Equipment List Support Equipment List No. Equipment Brand Model S/N FCC ID Signal cable / Length (m) Notebook DELL E6430 Notebook DELL E6430 Load ICC
---
---
---
---
DoC DoC DoC RJ45, 10m non-shielded cable w/o core. RJ45, 10m non-shielded cable w/o core. RJ45 (x3), 1.5m non-shielded cable w/o core. 1 2 3 1.3 Test Setup Chart Test Setup Diagram Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 8 of 63 1.4 The Equipment List Test Item Conducted Emission Test Site Conduction room 1 / (CO01-WS) Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until EMC Receiver R&S ESCS 30 100169 Oct. 15, 2013 Oct. 14, 2014 LISN LISN
(Support Unit) SCHWARZBECK Schwarzbeck 8127 8127-667 Nov. 23, 2013 Nov. 22, 2014 SCHWARZBECK Schwarzbeck 8127 8127-666 Dec. 04, 2013 Dec. 03, 2014 RF Cable-CON Woken CFD200-NL CFD200-NL-001 Apr. 24, 2013 Apr. 23, 2014 50 ohm terminal
(Support Unit) NA 50 04 Apr. 22, 2013 Apr. 21, 2014 Note: Calibration Interval of instruments listed above is one year. Test Item Radiated Emission Test Site 966 chamber 2 / (03CH02-WS) Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Spectrum Analyzer Receiver R&S R&S FSV40 ESR3 101499 101657 Feb. 08, 2014 Feb. 07, 2015 Jan. 18, 2014 Jan. 17, 2015 Bilog Antenna SCHWARZBECK VULB9168 VULB9168-524 Jan. 08, 2014 Jan. 07, 2015 Horn Antenna 1G-18G Horn Antenna 18G-40G Preamplifier Preamplifier Preamplifier SCHWARZBECK BBHA 9120 D BBHA 9120 D 1095 Jan. 07, 2014 Jan. 06, 2015 SCHWARZBECK BBHA 9170 BBHA 9170517 Dec. 27, 2013 Dec. 26, 2014 Burgeon Agilent EM BPA-530 83017A 100218 Dec. 09, 2013 Dec. 08, 2014 MY39501309 Dec. 09, 2013 Dec. 08, 2014 EM18G40G 060572 Jun. 20, 2013 Jun. 19, 2014 RF Cable HUBER+SUHNER SUCOFLEX104 MY16140/4 Dec. 17, 2013 Dec. 16, 2014 RF Cable HUBER+SUHNER SUCOFLEX104 MY16018/4 Dec. 17, 2013 Dec. 16, 2014 RF Cable HUBER+SUHNER SUCOFLEX104 MY16015/4 Dec. 17, 2013 Dec. 16, 2014 LF cable 3M LF cable 10M Woken Woken CFD400NL-LW CFD400NL-003 Dec. 17, 2013 Dec. 16, 2014 CFD400NL-LW CFD400NL-004 Dec. 17, 2013 Dec. 16, 2014 Note: Calibration Interval of instruments listed above is one year. Test Item Test Site Radiated Emission above 1GHz 966 chamber 2 / (03CH02-WS) Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Loop Antenna R&S HFH2-Z2 100330 Nov. 15, 2012 Nov. 14, 2014 Note: Calibration Interval of instruments listed above is two year. Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 9 of 63 Test Item RF Conducted Test Site
(TH01-WS) Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until Spectrum Analyzer Power Meter Power Sensor R&S Anritsu Anritsu FSV40 ML2495A MA2411B 101063 1241002 1207366 Feb. 17, 2014 Feb. 16, 2015 Oct. 24, 2013 Oct. 23, 2014 Oct. 24, 2013 Oct. 23, 2014 Note: Calibration Interval of instruments listed above is one year. 1.5 Test Standards According to the specification of EUT, the EUT must comply with following standards and KDB documents. 47 CFR FCC Part 15.247 ANSI C63.10-2009 FCC KDB 558074 D01 DTS Meas Guidance v03r01 FCC KDB 662911 D01 Multiple Transmitter Output v02r01 Note: The EUT has been tested and complied with FCC part 15B requirement. FCC Part 15B test results are issued to another report. 1.6 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Measurement Uncertainty Parameters Bandwidth Conducted power Frequency error Power density Conducted emission AC conducted emission Radiated emission < 1GHz Radiated emission > 1GHz Report No.: FR3N1403-01 Report Version: Rev. 02 Uncertainty 34.134 Hz 0.808 dB 34.134 Hz 0.463 dB 2.670 dB 2.88 dB 3.26 dB 4.94 dB Page : 10 of 63 2 Test Configuration 2.1 Testing Condition Test Item AC Conduction Test Site CO01-WS Ambient Condition Tested By 23C / 66%
Peter Lin Radiated Emissions 03CH02-WS 19-24C / 65-68%
Anderson Hong Brad Wu RF Conducted TH01-WS 21C / 64%
Felix Sung FCC site registration No.: 657002 IC site registration No.: 10807A-2 2.2 The Worst Test Modes and Channel Details Test item Modulation Test Frequency Data Rate Test Mode
(MHz)
(Mbps) / MCS Configuration Conducted Emissions Radiated Emissions 1GHz Radiated Emissions >1GHz Fundamental Emission Output Power 6dB bandwidth Power spectral density NOTE:
11g 11g 11b 11g HT20 HT40 2437 2437 2412 / 2437 / 2462 2412 / 2437 / 2462 2412 / 2437 / 2462 2422 / 2437 / 2452 6 Mbps 6 Mbps 1 Mbps 6 Mbps MCS 0 MCS 0
---
---
---
1. 2 adapters are used for this device, both adapters had been covered during the pretest and found that adapter 1 was the worst one and was selected for final test. Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 11 of 63 3 Transmitter Test Results 3.1 Conducted Emissions 3.1.1 Limit of Conducted Emissions Frequency Emission (MHz) Quasi-Peak Conducted Emissions Limit 0.15-0.5 0.5-5 5-30 66 - 56 *
56 60 Note 1: * Decreases with the logarithm of the frequency. 3.1.2 Test Procedures Average 56 - 46 *
46 50 The device is placed on a test table, raised 80 cm above the reference ground plane. The vertical conducting plane is located 40 cm to the rear of the device. The device is connected to line impedance stabilization network (LISN) and other accessories are connected to other LISN. Measured levels of AC power line conducted emission are across the 50 LISN port. AC conducted emission measurements is made over frequency range from 150 kHz to 30 MHz. This measurement was performed with AC 120V / 60Hz. 1. 2. 3. 4. 3.1.3 Test Setup Page : 12 of 63 Report No.: FR3N1403-01 Report Version: Rev. 02 3.1.4 Test Result of Conducted Emissions Modulation Power Phase 11g Line Test Freq. (MHz) 2437 Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB). 2: Over Limit (dB) = Level (dBuV) Limit Line (dBuV). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 13 of 63 Modulation Power Phase 11g Neutral Test Freq. (MHz) 2437 Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB). 2: Over Limit (dB) = Level (dBuV) Limit Line (dBuV). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 14 of 63 3.2 6dB and Occupied Bandwidth 3.2.1 Limit of 6dB Bandwidth The minimum 6dB bandwidth shall be at least 500 kHz. 3.2.2 Test Procedures 1. c Set resolution bandwidth (RBW) = 100 kHz, Video bandwidth = 300 kHz. 2. Detector = Peak, Trace mode = max hold. 3. Sweep = auto couple, Allow the trace to stabilize. Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower) that are attenuated by 6dB relative to the maximum level measured in the fundamental emission. 4. 3.2.3 Test Setup Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 15 of 63 3.2.4 Test Result of 6dB and Occupied Bandwidth Modulation Mode NTX Freq. (MHz) 6dB Bandwidth (MHz) Chain 0 Chain 1 Chain 2 Chain 3 Limit (kHz) 11b 11b 11b 11g 11g 11g HT20 HT20 HT20 HT40 HT40 HT40 2 2 2 2 2 2 2 2 2 2 2 2 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 10.09 10.09 10.09 10.09 10.09 10.09 16.58 16.58 16.52 16.52 16.58 16.64 17.74 17.74 17.74 17.74 17.68 17.74 36.52 36.52 36.64 36.64 36.52 36.52 Worst Plots
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
500 500 500 500 500 500 500 500 500 500 500 500 Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 16 of 63 Modulation Mode NTX Freq.
(MHz) 99% Occupied Bandwidth (MHz) Chain 0 Chain 1 Chain 2 Chain 3 11b 11b 11b 11g 11g 11g HT20 HT20 HT20 HT40 HT40 HT40 2 2 2 2 2 2 2 2 2 2 2 2 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 12.30 12.30 12.26 17.04 16.97 17.05 17.66 17.73 17.66 36.92 36.86 36.99 12.23 12.23 12.23 16.97 16.97 16.97 17.66 17.73 17.66 36.92 36.99 36.92 Worst Plots
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 17 of 63 3.3 RF Output Power 3.3.1 Limit of RF Output Power Conducted power shall not exceed 1Watt. Antenna gain <= 6dBi, no any corresponding reduction is in output power limit. Antenna gain > 6dBi Non Fixed, point to point operations. The conducted output power from the intentional radiator shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dB Fixed, point to point operations Systems operating in the 24002483.5 MHz band that are used exclusively for fixed, point-to-point Operations, maximum peak output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6 dBi. Systems operating in the 57255850 MHz band that are used exclusively for fixed, point-to-point operations ,no any corresponding reduction is in transmitter peak output power 3.3.2 Test Procedures Maximum Peak Conducted Output Power Spectrum analyzer 1. 2. 3. Set RBW = 1MHz, VBW = 3MHz, Detector = Peak. Sweep time = auto, Trace mode = max hold, Allow trace to fully stabilize. Use the spectrum analyzer channel power measurement function with the band limits set equal to the DTS bandwidth edges. Power meter 1. A broadband Peak RF power meter is used for output power measurement. The video bandwidth of power meter is greater than DTS bandwidth of EUT. If duty cycle of test signal is not 100 %, trigger and gating function of power meter will be enabled to capture transmission burst for measuring output power. Maximum Conducted Output Power Power meter 1. A broadband Average RF power meter is used for output power measurement. The video bandwidth of power meter is greater than DTS bandwidth of EUT. If duty cycle of test signal is not 100 %, trigger and gating function of power meter will be enabled to capture transmission burst for measuring output power. 3.3.3 Test Setup Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 18 of 63 3.3.4 Test Result of Maximum Output Power Modulation Mode NTX Freq.
(MHz) Conducted (average) output power
(dBm) Chain 0 Chain 1 Chain 2 Chain 3 Total Power
(mW) Total Power
(dBm) Limit
(dBm) 11b 11b 11b 11g 11g 11g HT20 HT20 HT20 HT40 HT40 HT40 2 2 2 2 2 2 2 2 2 2 2 2 2412 15.64 15.82 2437 15.63 15.60 2462 15.63 15.42 2412 15.28 15.21 2437 18.58 18.89 2462 16.86 16.55 2412 14.28 14.26 2437 18.51 18.82 2462 15.24 14.92 2422 12.35 12.18 2437 15.35 15.42 2452 13.05 12.98
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
74.838 18.74 72.867 18.63 71.393 18.54 66.918 18.26 149.557 21.75 93.714 19.72 53.460 17.28 147.166 21.68 64.465 18.09 33.699 15.28 69.111 18.40 40.045 16.03 30 30 30 30 30 30 30 30 30 30 30 30 Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 19 of 63 3.4 Power Spectral Density 3.4.1 Limit of Power Spectral Density Power spectral density shall not be greater than 8 dBm in any 3 kHz band. 3.4.2 Test Procedures Maximum peak conducted output power was used to demonstrate compliance to the fundamental output power limit. 1. 2. 3. 4. Set the RBW = 30kHz, VBW = 100kHz. Detector = Peak, Sweep time = auto couple. Trace mode = max hold, allow trace to fully stabilize. Use the peak marker function to determine the maximum amplitude level. Maximum (average) conducted output power was used to demonstrate compliance to the fundamental output power limit. 1. 2. 3. 4. 5. Set the RBW = 30kHz, VBW = 100 kHz. Detector = RMS, Sweep time = auto couple. Set the sweep time to: 10 x (number of measurement points in sweep) x (maximum data rate per stream). Perform the measurement over a single sweep. Use the peak marker function to determine the maximum amplitude level. 3.4.3 Test Setup Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 20 of 63 3.4.4 Test Result of Power Spectral Density Modulation Mode NTX Freq. (MHz) Total Power Spectral Density
(dBm/30kHz) Limit (dBm/3kHz) 11b 11b 11b 11g 11g 11g HT20 HT20 HT20 HT40 HT40 HT40 2 2 2 2 2 2 2 2 2 2 2 2 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452
-3.93
-3.73
-3.49
-6.19
-2.39
-4.08
-8.77
-3.29
-6.28
-12.36
-9.60
-11.83 Note: Test result is bin-by-bin summing measured value of each TX port. Worst Plots 8 8 8 8 8 8 8 8 8 8 8 8 Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 21 of 63 3.5 Unwanted Emissions into Restricted Frequency Bands 3.5.1 Limit of Unwanted Emissions into Restricted Frequency Bands Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m) Restricted Band Emissions Limit 0.009~0.490 0.490~1.705 1.705~30.0 30~88 88~216 216~960 Above 960 2400/F(kHz) 24000/F(kHz) 48.5 - 13.8 33.8 - 23 30 100 150 200 500 29 40 43.5 46 54 300 30 30 3 3 3 3 Note 1:
Qusai-Peak value is measured for frequency below 1GHz except for 990 kHz, 110490 kHz frequency band. Peak and average value are measured for frequency above 1GHz. The limit on average radio frequency emission is as above table. The limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit Note 2:
Measurements may be performed at a distance other than what is specified provided. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor as below, Frequency at or above 30 MHz: 20 dB/decade Frequency below 30 MHz: 40 dB/decade. 3.5.2 Test Procedures 1. 2. 3. Measurement is made at a semi-anechoic chamber that incorporates a turntable allowing a EUT rotation of 360. A continuously-rotating, remotely-controlled turntable is installed at the test site to support the EUT and facilitate determination of the direction of maximum radiation for each EUT emission frequency. The EUT is placed at a height of 0.8 m test table above the ground plane. Measurement is made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna is varied in height (1m ~ 4m) above the reference ground plane to obtain the maximum signal strength. Distance between EUT and antenna is 3 m. This investigation is performed with the EUT rotated 360, the antenna height scanned between 1 m and 4 m, and the antenna rotated to repeat the measurements for both the horizontal and vertical antenna polarizations. Note:
120kHz measurement bandwidth of test receiver and Quasi-peak detector is for radiated emission below 1GHz. RBW=1MHz, VBW=3MHz and Peak detector is for peak measured value of radiated emission above 1GHz. RBW=1MHz, VBW=1/T and Peak detector is for average measured value of radiated emission above 1GHz. 1. 2. 3. Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 22 of 63 3.5.3 Test Setup Radiated Emissions below 1 GHz Radiated Emissions above 1 GHz Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 23 of 63 3.5.4 Transmitter Radiated Unwanted Emissions (Below 1GHz) Modulation Polarization 11g Horizontal Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 24 of 63 Modulation Polarization 11g Vertical Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit. Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 25 of 63 3.5.5 Transmitter Radiated Unwanted Emissions (Above 1GHz) for 11b Modulation Polarization 11b Horizontal Test Freq. (MHz) 2412 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 26 of 63 Modulation Polarization 11b Vertical Test Freq. (MHz) 2412 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 27 of 63 Modulation Polarization 11b Horizontal Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 28 of 63 Modulation Polarization 11b Vertical Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 29 of 63 Modulation Polarization 11b Horizontal Test Freq. (MHz) 2462 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 30 of 63 Modulation Polarization 11b Vertical Test Freq. (MHz) 2462 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 31 of 63 3.5.6 Transmitter Radiated Unwanted Emissions (Above 1GHz) for 11g Modulation Polarization 11g Horizontal Test Freq. (MHz) 2412 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 32 of 63 Modulation Polarization 11g Vertical Test Freq. (MHz) 2412 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 33 of 63 Modulation Polarization 11g Horizontal Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 34 of 63 Modulation Polarization 11g Vertical Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 35 of 63 Modulation Polarization 11g Horizontal Test Freq. (MHz) 2462 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 36 of 63 Modulation Polarization 11g Vertical Test Freq. (MHz) 2462 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 37 of 63 3.5.7 Transmitter Radiated Unwanted Emissions (Above 1GHz) for HT20 Modulation Polarization HT20 Horizontal Test Freq. (MHz) 2412 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 38 of 63 Modulation Polarization HT20 Vertical Test Freq. (MHz) 2412 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 39 of 63 Modulation Polarization HT20 Horizontal Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 40 of 63 Modulation Polarization HT20 Vertical Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 41 of 63 Modulation Polarization HT20 Horizontal Test Freq. (MHz) 2462 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 42 of 63 Modulation Polarization HT20 Vertical Test Freq. (MHz) 2462 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 43 of 63 3.5.8 Transmitter Radiated Unwanted Emissions (Above 1GHz) for HT40 Modulation Polarization HT40 Horizontal Test Freq. (MHz) 2422 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 44 of 63 Modulation Polarization HT40 Vertical Test Freq. (MHz) 2422 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 45 of 63 Modulation Polarization HT40 Horizontal Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 46 of 63 Modulation Polarization HT40 Vertical Test Freq. (MHz) 2437 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 47 of 63 Modulation Polarization HT40 Horizontal Test Freq. (MHz) 2452 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 48 of 63 Modulation Polarization HT40 Vertical Test Freq. (MHz) 2452 Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
*Factor includes antenna factor , cable loss and amplifier gain Note 2: Margin (dB) = Emission level (dBuV/m) Limit (dBuV/m). Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 49 of 63 3.6 Emissions in Non-Restricted Frequency Bands 3.6.1 Emissions in Non-Restricted Frequency Bands Limit Peak power in any 100 kHz bandwidth outside of the authorized frequency band shall be attenuated by at least 30 dB relative to the maximum in-band peak PSD level in 100 kHz 3.6.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.6.3 Test Procedures Reference level measurement 1. Set RBW=100kHz, VBW = 300kHz , Detector = Peak, Sweep time = Auto 2. Trace = max hold , Allow Trace to fully stabilize 3. Use the peak marker function to determine the maximum PSD level Emission level measurement 1. Set RBW=100kHz, VBW = 300kHz , Detector = Peak, Sweep time = Auto 2. Trace = max hold , Allow Trace to fully stabilize 3. Scan Frequency range is up to 25GHz 4. Use the peak marker function to determine the maximum amplitude level 3.6.4 Test Setup Transmitter Radiated Bandedge Emissions
. 3.6.5 Test Result of Emissions in non-restricted frequency bands This test item is performed on each TX output individually without summing or adding 10 log(NANT) since measurements are made relative to the in-band emissions on the individual outputs. Only worst test result of each operating mode is presented. Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 50 of 63 3.6.6 Unwanted Emissions into Non-Restricted Frequency Bands 802.11b Reference Level Tx 2412MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 51 of 63 Reference Level Tx 2437MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 52 of 63 Reference Level Tx 2462MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 53 of 63 802.11g Reference Level Tx 2412MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 54 of 63 Reference Level Tx 2437MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 55 of 63 Reference Level Tx 2462MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 56 of 63 802.11n HT20 Reference Level Tx 2412MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 57 of 63 Reference Level Tx 2437MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 58 of 63 Reference Level Tx 2462MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 59 of 63 802.11n HT40 Reference Level Tx 2422MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 60 of 63 Reference Level Tx 2437MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 61 of 63 Reference Level Tx 2452MHz / 30MHz~25GHz (down 20dBc)
---
---
Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 62 of 63 4 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corp, it is our definitive objective is to institute long term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff. Our Test sites are located at Linkou District and Kwei Shan Hsiang. Location map can be found on our website http://www.icertifi.com.tw. Linkou Tel: 886-2-2601-1640 Kwei Shan Tel: 886-3-271-8666 No. 30-2, Ding Fwu Tsuen, Lin Kou District, New Taipei City, Taiwan, R.O.C. No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C. If you have any suggestion, please feel free to contact us as below information Tel: 886-3-271-8666 Fax: 886-3-318-0155 Email: ICC_Service@icertifi.com.tw END Report No.: FR3N1403-01 Report Version: Rev. 02 Page : 63 of 63
1 | test setup photos | Test Setup Photos | 311.71 KiB |
Photographs of the Test Configuration Conducted Emission Test Report No.: FR3N1403-01 Report Version: Rev. 01 Page: : 1 of 2 Radiated Emission Test Report No.: FR3N1403-01 Report Version: Rev. 01 Page: : 2 of 2
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-05-05 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-05-05
|
||||
1 | Applicant's complete, legal business name |
Netgear Incorporated
|
||||
1 | FCC Registration Number (FRN) |
0022158786
|
||||
1 | Physical Address |
350 East Plumeria Drive
|
||||
1 |
San Jose, CA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
b******@phoenix-testlab.de
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
PY3
|
||||
1 | Equipment Product Code |
14100257
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
D**** K****
|
||||
1 | Telephone Number |
40889********
|
||||
1 | Fax Number |
40890********
|
||||
1 |
d******@netgear.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/26/2014 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | N300 Wireless Router | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output Power listed is the maximum combined conducted output power as indicated in the filing. This device and it's antennas must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any additional antenna or transmitter as documented in this filing. End-users and installers must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
International Certification Corp.
|
||||
1 | Name |
F**** C********
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
J******@icertifi.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | MO | 2412 | 2462 | 0.15 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | MO | 2422 | 2452 | 0.069 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC