FCC ID: PY321300545 NIGHTHAWK AXE7800 Tri-Band WiFi 6E Router

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5625639.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Quick Start 1 Download the Nighthawk app to install your router 2 Secure your devices with NETGEAR Armor 3 Do more with the app On your mobile phone, download the Nighthawk app and follow the setup instructions. NETGEAR Armor powered by Bitdefender provides best-in-class cybersecurity protection for your smart devices, smartphones, and computers. Tap the Security icon in your Nighthawk app to explore your free trial. Check out everything you can do on the Nighthawk app! Pause the Internet, run a speed test, set Smart Parental Controls, and more. Check for Smart Parental Controls availability in your area: www.netgear.com/

NETGEAR-SPC-availability Contents Overview 2 4 6 1 3 5 7 Router Ethernet cable B A D C F H E G I 1 Power LED 6 Ethernet LAN Ports 15 LEDs A WiFi On/Off button with LED F Multi-Gig Internet port/

Ethernet LAN port 5 2 Internet LED 7 USB 3.0 LED B WPS button with LED G USB 3.0 port Power adapter

(varies by region) 3 2.4 GHz WiFi LED 4 5 GHz WiFi LED 5 6 GHz WiFi LED C Reset button D 1G Internet port/

Ethernet LAN port 5 E Ethernet LAN ports 14 H Power On/Off button I Power connector NOTE: You can use either the 1G Internet port or Multi-Gig Internet port to connect to the Internet. Troubleshooting Support and Community If youre having problems with the installation, try the following:

Turn off your modem and router and disconnect them. Restart your modem. Reconnect your router to your modem, and try installing with the Nighthawk app again. If youre still unable to install your router using the Nighthawk app, manually install it using the router web interface. Visit http://www.routerlogin.net to access the router web interface. If you already own another NETGEAR router and you used the Nighthawk app before, go to the dashboard and tap

> NEW SETUP to install your new router. For more information, visit netgear.com/routerhelp. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA October 2021 NETGEAR INTERNATIONAL LTD Floor 1, Building 3, University Technology Centre Curraheen Road, Cork, T12EF21, Ireland Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5625638.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23cm between the radiator & your body. FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

REV DESCRIPTION OF REVISION 01 02 03 04 INITIAL DOCUMENT CREATION ADDED FCCID ADDED QR CODE AND RELAYOUT INCREASED QR CODE SIZE ENG APPD DATE AHAN 21JUL2021 AHAN AHAN AHAN 29SEPT2021 30SEPT2021 5OCT2021 6 Made in Indonesia 7 13mm 0.2mm 13mm 0.2mm Pantone Cool Gray 9C White Black AUTHOR:

SHEET:

AHAN 1 of 1 TITLE:

AW,PLBL,RAXE300NA,V1 THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. P/N:

AW-14900-01 REV:

04

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: December 15, 2021 We, Netgear Incorporated here declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: PY321300545 If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

David Kay/ Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: david.kay@netgear.com

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2021-12-15 FCC ID: PY321300545 To the attention of:

Federal Communications Commission Authorization and Evaluation Division Declaration Letter for Low Power Indoor Access Points (6ID) We, Netgear Incorporated, attest that this device under FCC ID: PY321300545 complies with device protocol requirements and operational restrictions for Indoor Access Point Devices (6ID). a) The method used by this indoor access point to control the associated client/subordinate power control is as follows: An 11ax IEEE AP's Transmit Power Envelope element has information fields for Power/PSD limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. b) This Low-power Indoor Access Point operates in the 5.925-7.125 GHz band. It is supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. c) We acknowledge this device is subject to and in full compliance with the device restrictions listed below. All users are notified of these restrictions through the user manual. Low-power indoor Access Point. Access Point operating in the 5.925-7.125 GHz band shall be supplied power from a wired connection, has an integrated antenna, is not battery powered, and does not have a weatherized enclosure. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. d) This device employs a Contention-Based Protocol as demonstrated in the test report. If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you!

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Sincerely yours,

David Kay/ Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: david.kay@netgear.com

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Confidentiality Request Letter Revision History From Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box

(obsolete) Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete) Updated company logo (current) Updated References and Contact Info 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 1 of 2 Rev 7.0 NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel: 408-890-3657/Fax: 408-907-8097 Date: 2022-03-10 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc:

Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: PY321300545 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Exhibit Block Diagram External Photos Internal Photos Users Manual Operational Description/ Theory of Operation Software Operational Description Schematics Test Setup Photos days; or for a specified date of not to exceed 180 days from the Grant Date The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature:

Clients name & title: David Kay, Regulatory Compliance Director Contact information / address: E-mail: david.kay@netgear.com i Permanent confidentiality may be requested in accordance with FCC KDB 726920 SCS-F019: Confidentiality Request Letter Page 2 of 2 Rev 7.0

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2021-12-15 FCC ID: PY321300545 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern:

NETGEAR, INC. hereby authorizes Debby Lin/Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin/Senior Specialist of BV CPS Taoyuan on NETGEAR, INC.s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours,

David Kay/ Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: david.kay@netgear.com

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 January 5, 2022 DTS-UNII Device Declaration Letter To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: PY321300545

(1) DFS Device --

(2) Frequency Band

(MHz) 5.15-5.25GHz 5.25-5.35GHz 5.470-5.725GHz 5.650-5.730GHz 5.725 5.850GHz Master Client without radar detection capability Client with Radar detection capability , N/A Active / Passive Scanning , ad-hoc mode access point capability Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , Yes , Yes , Yes , No No No No No passive scanning

(where the device is can listen only with no probes) No No No No No Yes , Yes , Yes , Yes , Yes , Ad Hoc Mode or WIFI Direct capability Access point capability Yes , Yes , Yes , Yes , Yes , No No No No No Yes , Yes , Yes , Yes , Yes , No No No No No Yes , Country code selection ability -

(3) No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection)

(4) Meet 15.202 requirement -

Please check below:

Yes, No, A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under For client devices that have software configuration control to operate in different modes (active scanning control of the master. A device in client mode is not able to initiate a network.

(5) in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 No Apply, (If apply, please help to provide explanation on it was implement, and how software Apply, was controlled)

David Kay/ Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: david.kay@netgear.com