FCC ID: PY325300650 Orbi 11BE WiFi 7 Tri-band Router & Orbi 11BE WiFi 7 Tri-band Satellite

Brand: NETGEAR Model name: RBE781,RBE780 FCC ID: PY325300650 IC:4054A-25300650

Satellite Model RBE7BO Se CCS SS Orbi Login http:/ /orbilogin.net This device complies with Part 15 ofthe FCC Rules. Operation Is subject to the folowing two conditions: (1) ths device may ot cause harmful interference, and (2) this device must accept any interference received, nlucing interference that may eause undesired operation, FCCID: PY325300650 for indoor use only. 1c: 4054A-25300650 CCANICES (8) /NMB (8) NETGEAR, INC. Made in Vietnam ee-elnput: 12 = 254 272-14879-01

orbi Router Model RBE781 CSI htt://orbilogin net This device comes wth Part 15 ofthe FEC Res. Operation Is subject tothe felling two contin: (1) ths devee may ot ese haf linererence and (2) this device must cept any interference receved, ndudng interference Sat nay cause undesved operation. FCC ID: PY325300650 fer indoor use ony Ic: 4084%"25300850

(CAN EES (8)/NMB (8)

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: August 13, 2026 We, NETGEAR, INC. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: PY325300650 If you should have any questions regarding this declaration, please dont hesitate to contact us. Thank you!

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: NETGEAR, INC. FRN: 0035631530 Grantee Code: PY3 Contact Name: John Ramones Street Address: 3553 North First Street City/Province/Zip: San Jose, CA 95134, USA Telephone No: 4088903160 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by 2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature:

Date: 2025-10-23 Signed by (printed name): John Ramones

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: 2026-08-13 FCC ID: PY325300650 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing NETGEAR, INC. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing NETGEAR, INC. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely yours,

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: 2026-08-13 FCC ID: PY325300650 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours,

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: 2026-08-13 FCC ID: PY325300650 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commissions rules, we request short-term confidential treatment for the following information for 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External photos Test Setup photos Users manual Internal Photos Sincerely yours,

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: 2026-08-13 FCC ID: PY325300650 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern:

NETGEAR, INC. hereby authorizes Jenny NIEN / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Jenny NIEN /

Specialist of BV CPS Taoyuan on NETGEAR, INC.s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours,

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: 2026-08-13 FCC ID: PY325300650 To the attention of:

Federal Communications Commission Authorization and Evaluation Division Declaration Letter for Indoor Subordinate Devices (6PP) We, NETGEAR, INC., attest that this device under FCC ID: PY325300650 complies with device protocol requirements and operational restrictions for Indoor Subordinate Devices (6PP). a) This device will always be under the control of a low-power indoor AP and will only initiate brief messages to be under the control of an indoor low-power AP. These short messages will only occur if the subordinate has detected a low-power indoor AP operating on a channel. These short messages will have a time-out mechanism such that they will not continually repeat the request if they do not receive a response from an AP. Once under control of an indoor access point, a subordinate will initiate connections with clients, other access points, or other subordinate devices at a lower power or equal to the power advertised by the access point controlling the subordinate and never above the maximum output power allowed by the FCC grant for equipment class 6PP. The method this device uses to inform the associated client/subordinate of its permitted maximum power is as follows:

An 11be IEEE AP's Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device b) This device employs a Contention-Based Protocol as demonstrated in the test report. c) This Subordinate device operates in the 5.925-7.125 GHz band. It is supplied power from a wired connection, has an integrated antenna, is not battery-powered, does not have a weatherized enclosure, and has no direct connection to the internet. d) We acknowledge this device is subject to and in full compliance with the device restrictions listed below. All users are notified of these restrictions through the user manual. The operation of this device will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that this device's operation is permitted in large aircraft while flying above 10,000 feet. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you!

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Sincerely yours,

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: 2026-08-13 FCC ID: PY325300650 To the attention of:

Federal Communications Commission Authorization and Evaluation Division Declaration Letter for Low Power Indoor Access Points (6ID) We, NETGEAR, INC., attest that this device under FCC ID: PY325300650 complies with device protocol requirements and operational restrictions for Indoor Access Point Devices (6ID). a) The method used by this indoor access point to control the associated client/subordinate power control is as follows:

An 11be IEEE AP's Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device b) This Low-power Indoor Access Point operates in the 5.925-7.125 GHz band. It is supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. c) We acknowledge this device is subject to and in full compliance with the device restrictions listed below. All users are notified of these restrictions through the user manual. Low-power indoor Access Point. Access Point operating in the 5.925-7.125 GHz band shall be supplied power from a wired connection, has an integrated antenna, is not battery powered, and does not have a weatherized enclosure. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet only in the 5.925-6.425 GHz band. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. d) This device employs a Contention-Based Protocol as demonstrated in the test report. If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you!

Sincerely yours,

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: 2026-08-24 FCC ID: PY325300650 Declaration for Master with Radar Detection We, NETGEAR, INC. hereby declare that the device meets all the other requirements specified in Part 15E Section 15.407. If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: 2026-08-13 FCC ID: PY325300650 To the attention of:

Federal Communications Commission Authorization and Evaluation Division Declaration Letter for Indoor Access Points We, NETGEAR, INC., attest that this device under FCC ID: PY325300650 complies with the device protocol requirements and operational restrictions for Indoor Access Point Devices. a) This indoor access point can act as a master as defined in Section 15.202, allowing it to transmit without receiving an enabling signal. This mode can select a channel and initiate a network by sending enabling signals to client devices and subordinate devices. b) This Indoor Access Point operates in the 5.850-5.895 GHz band. It is supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. c) We acknowledge this device is subject to and in full compliance with the device restrictions listed below:

This device is for indoor use only. Indoor Access Points operating in the U-NII-4 band and U-NII -3 & -4 span channels shall be supplied power from a wired permanent indoor local power connection, use an integrated antenna, is not battery powered, and does not use a weatherized enclosure. This device bears the following statement in a conspicuous location on the device and the user's manual: FCC regulations restrict the operation of this device to indoor use only. If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you!

Sincerely yours,

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 3553 North First Street, San Jose, CA 95134, USA Date: 2026-08-13 FCC ID: PY325300650 To the attention of:

Federal Communications Commission Authorization and Evaluation Division Declaration Letter for Subordinate Devices We, NETGEAR, INC., attest that this device under FCC ID: PY325300650 complies with device protocol requirements and operational restrictions for Subordinate Devices. a) Subordinates cannot act as a standalone master device as defined Section 15.202 and must act as a contingent device under Section 15.202 subservient to an indoor access point within the same building or structure. b) The subordinate passively scans or listens in the U-NII-4 or U-NII -3 & -4 span channels for an indoor access point available channel. c) Permitted to initiate a brief probe message requesting to join and associated with a specific access point. d) This Subordinate device operates in the 5.850-5.895 GHz band. It is supplied power from a wired connection, has an integrated antenna, is not battery-powered, does not have a weatherized enclosure, and has no direct connection to the internet. e) We acknowledge this device is subject to and in full compliance with the device restrictions for Subordinate devices listed below:

This device is for indoor use only. Subordinate device operating in the 5.850-5.895 GHz band shall be supplied power from a wired connection, has an integrated antenna, is not battery powered, and does not have a weatherized enclosure. This device is prohibited for control of or communications with unmanned aircraft systems including drones. This device bears the following statement in a conspicuous location on the device and the user's manual: FCC regulations restrict the operation of this device to indoor use only. The users manual additionally warns users that this device cannot be used to provide connections between separate buildings or structures. If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you!

Sincerely yours,

John Ramones, Head of Product Design NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]